Medium voltage cables

Page 1

MV-90 5 - 35 kV Single Conductors

Description Copper or aluminum stranded, thermo set insulated.

Contruction Conductor Copper or aluminum stranded, thermo set insulated. Conductor Shield Cross linked polyethylene semiconductor. Insulation Cross linked polyethylene XLPE. Insulation shield Cross linked polyethylene removable semiconductor Insulation and shields are applied by true triple extrusion process. Metallic shield Copper tape helically and overlapped applied over insulation shield, 2.5 mils (0.0635mm) thickness. Jacket Flame retardant polyvinyl chloride PVC. Options EPR or XLPE-TR (Tree retardant XLPE). Copper wires metallic shield. Polyethylene Jacket, PVC SR (Sunlight Resistant) Jacket, PVC Tray Cable type jacket. Moisture barrier against longitudinally migration. Armor for Direct Burial

Characteristics Operating Temperature Normal continuous operation 90째C for wet or dry locations (105째C optional). Overload 130째C. Short circuit 250째C. 7


Rated Voltage 5, 8, 15, 25 and 35 kV. Insulation Level 100% (133% and 173% optional).

Applications Distribution of electric energy at Medium Voltage, installed at air, underground ducts, raceways, direct buried or tray cables.

Standards CENTELSA’s 5-35 kV single conductors are manufactured in accordance with the following standards: ASTM B496, NTC-ICONTEC 2187. Compact round concentric lay stranded Copper Conductors. ASTM B400, NTC-ICONTEC 4334. Compact round concentric lay stranded Aluminum 1350 Conductors. UL 1072. Medium Voltage Power Cables MV90. ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. AEIC CS8. Specification for Extruded Dielectric, Shielded Power Cables Rated 5 through 46 kV.

Certifications CENTELSA’s 5-35 kV single conductors are certified by: UL 1072. File E167359. ICONTEC (Colombia). NTC 2186 standard CIDET (Colombia). Cert. 00412. 15 kV Medium Voltage Copper, XLPE. CIDET (Colombia). Cert. 00413. 35 kV Medium Voltage Copper, XLPE. CIDET (Colombia). Cert. 00414. 15 kV Medium Voltage Copper, EPR. CIDET (Colombia). Cert. 00415. 35 kV Medium Voltage Copper, EPR.

8


Note: Configurations and sizes herein not specified are available upon request.

MV-90 5 kV Single Conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

3.40 4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

8.4 13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29

8.86 9.75 10.87 12.27 13.05 13.99 15.01 16.20 17.53 18.91 20.18 21.35 22.44 23.48 24.39 26.57 28.98 32.84

1.14 1.52 1.52 1.52 1.52 1.52 1.52 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

13.20 14.88 16.00 17.40 18.18 19.12 20.14 22.35 23.68 25.06 26.33 27.50 28.59 29.63 30.54 33.30 35.71 39.57

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

245 333 428 571 665 785 933 1169 1401 1615 1875 2133 2389 2644 2896 3452 4203 5452

192 249 294 359 398 448 508 632 725 816 916 1014 1111 1206 1298 1534 1806 2255

2.10 1.32 0.831 0.523 0.415 0.329 0.261 0.207 0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

3.43 2.16 1.36 0.854 0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

0.4010 0.3835 0.3660 0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 20 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

9

15795 13740 11824 10081 9319 8544 7838 7150 6512 5961 5531 5187 4902 4659 4465 4060 3691 3221


MV-90 5 kV Single Conductors, 90째C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

134 169 213 268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0130 0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

349 384 428 483 514 551 591 638 690 744 794 841 883 924 960 1046 1141 1293

45 60 60 60 60 60 60 80 80 80 80 80 80 80 80 80 80 80

520 586 630 685 716 753 793 880 932 987 1037 1083 1126 1167 1202 1311 1406 1558

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20째C1 (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

164 224 287 384 447 528 627 786 942 1085 1260 1434 1606 1777 1946 2320 2825 3664

129 167 198 241 267 301 341 425 487 548 616 682 746 810 872 1031 1214 1515

0.641 0.403 0.253 0.159 0.126 0.100 0.0795 0.0630 0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

1.05 0.658 0.414 0.260 0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm-km)

0.6454 0.6172 0.5890 0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.9 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

10

9815 8538 7347 6264 5791 5309 4870 4443 4046 3704 3437 3223 3046 2895 2774 2523 2293 2002


MV-90 8 kV Single Conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

CROSS SECTION (mm2)

13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION THICKNESS (mm)

2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92

INSULATION JACKET DIAMETER THICKNESS (mm) (mm)

11.05 12.17 13.57 14.35 15.29 16.31 17.50 18.83 20.21 21.48 22.65 23.74 24.78 25.69 27.87 30.28 34.14

1.52 1.52 1.52 1.52 1.52 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

OVERALL DIAMETER (mm)

16.18 17.30 18.70 19.48 20.42 22.46 23.65 24.98 26.36 27.63 28.80 29.89 30.93 32.42 34.60 37.01 40.87

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

368 465 611 707 829 1030 1220 1455 1671 1934 2194 2452 2709 2999 3524 4280 5535

285 332 399 440 492 605 683 778 872 975 1075 1173 1270 1400 1606 1882 2338

1.32 0.831 0.523 0.415 0.329 0.261 0.207 0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

2.16 1.36 0.854 0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm-km)

0.3835 0.3660 0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

16338 14169 12171 11291 10388 9562 8752 7997 7341 6827 6414 6071 5778 5543 5052 4601 4027

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 20 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 8 kV Single Conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

169 213 268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115

INSULATION JACKET DIAMETER THICKNESS (mm) (mm)

435 479 534 565 602 642 689 741 796 846 892 935 976 1011 1097 1192 1344

60 60 60 60 60 80 80 80 80 80 80 80 80 80 80 80 80

OVERALL DIAMETER (mm)

637 681 736 767 804 884 931 984 1038 1088 1134 1177 1218 1276 1362 1457 1609

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

248 313 411 475 557 692 820 978 1123 1300 1474 1648 1820 2015 2368 2876 3720

191 223 268 295 330 406 459 523 586 655 722 788 854 941 1079 1265 1572

0.403 0.253 0.159 0.126 0.100 0.0795 0.0630 0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

0.658 0.414 0.260 0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.9 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm-km)

0.6172 0.5890 0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

11

10152 8804 7563 7016 6455 5942 5438 4969 4562 4242 3985 3773 3590 3444 3139 2859 2502


MV-90 15 kV Single Conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45

16.63 17.41 18.35 19.37 20.56 21.89 23.27 24.54 25.71 26.80 27.84 28.75 30.93 33.34 37.20

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79

22.78 23.56 24.50 25.52 26.71 28.04 29.42 30.69 32.44 33.53 34.57 35.48 37.66 40.07 45.50

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

768 869 997 1154 1349 1590 1813 2081 2383 2647 2909 3168 3703 4469 5900

556 601 660 729 813 914 1013 1122 1264 1368 1471 1569 1785 2071 2704

0.523 0.415 0.329 0.261 0.207 0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

0.854 0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm-km)

0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

16393 15303 14175 13131 12097 11123 10268 9592 9044 8588 8195 7879 7214 6600 5809

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 20 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 15 kV Single Conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

175 175 175 175 175 175 175 175 175 175 175 175 175 175 175

655 685 722 763 809 862 916 966 1012 1055 1096 1132 1218 1313 1465

80 80 80 80 80 80 80 80 80 80 80 80 80 80 110

897 928 965 1005 1052 1104 1158 1208 1277 1320 1361 1397 1483 1578 1791

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

516 584 670 776 907 1069 1218 1398 1601 1779 1955 2129 2488 3003 3965

373 404 443 490 546 614 681 754 849 919 988 1055 1199 1392 1817

0.159 0.126 0.100 0.0795 0.0630 0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

0.260 0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.9 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

12

10186 9509 8808 8160 7517 6912 6381 5960 5620 5337 5092 4896 4483 4101 3610


MV-90 25 kV Single Conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60

21.67 22.61 23.63 24.82 26.15 27.53 28.80 29.97 31.06 32.10 33.01 35.19 37.60 41.46

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79 2.79 2.79

27.82 28.76 29.78 30.97 32.88 34.26 35.53 36.70 37.79 38.83 39.74 43.49 45.90 50.62

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

1052 1186 1350 1552 1838 2071 2348 2622 2892 3161 3425 4125 4915 6309

785 849 924 1016 1162 1271 1389 1503 1614 1723 1827 2207 2518 3112

0.415 0.329 0.261 0.207 0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

19847 18509 17258 16006 14814 13758 12915 12227 11651 11150 10747 9893 9096 8060

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 20 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 25 kV Single Conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

260 260 260 260 260 260 260 260 260 260 260 260 260 260

INSULATION JACKET DIAMETER THICKNESS (mm) (mm)

853 890 930 977 1030 1084 1134 1180 1223 1264 1300 1385 1480 1632

80 80 80 80 80 80 80 80 80 80 80 110 110 110

OVERALL DIAMETER (mm)

1095 1132 1173 1219 1295 1349 1399 1445 1488 1529 1565 1712 1807 1993

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

707 797 907 1043 1235 1391 1578 1762 1944 2125 2302 2772 3303 4240

527 571 621 683 781 854 933 1010 1085 1158 1228 1483 1692 2091

0.126 0.100 0.0795 0.0630 0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.9 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

13

12333 11501 10724 9946 9205 8549 8025 7598 7240 6929 6678 6147 5652 5008


MV-90 35 kV Single conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682

Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76

26.97 27.99 29.18 30.51 31.89 33.16 34.33 35.42 36.46 37.37 39.55 41.96 45.82

JACKET THICKNESS (mm)

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79 2.79 2.79

OVERALL DIAMETER (mm)

33.70 34.72 35.91 37.24 38.62 39.89 41.06 42.15 43.19 44.10 48.71 51.12 54.98

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

1445 1616 1827 2086 2327 2612 2893 3171 3447 3716 4526 5335 6675

1108 1190 1291 1410 1528 1653 1775 1892 2008 2118 2608 2937 3479

0.329 0.261 0.207 0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

0.537 0.426 0.338 0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm-km)

0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

22170 20773 19366 18016 16810 15841 15047 14378 13794 13323 12318 11374 10136

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 20 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 35 kV Single conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

345 345 345 345 345 345 345 345 345 345 345 345 345

INSULATION JACKET DIAMETER THICKNESS (mm) (mm)

1062 1102 1149 1201 1256 1306 1352 1394 1435 1471 1557 1652 1804

80 80 80 80 80 80 80 80 80 80 110 110 110

OVERALL DIAMETER (mm)

1327 1367 1414 1466 1521 1571 1617 1660 1700 1736 1918 2013 2164

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

971 1086 1228 1402 1564 1756 1945 2131 2316 2498 3042 3585 4486

744 800 867 947 1027 1111 1193 1272 1350 1423 1753 1974 2338

0.100 0.0795 0.0630 0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.9 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

14

13776 12908 12034 11195 10446 9844 9350 8934 8572 8279 7654 7068 6298


46 - 69 kV Single Conductors

Description Copper or aluminum stranded, thermo set insulated

Construction Conductor Soft Copper or 1350-H19 aluminum, compact stranded. Conductor Shield Cross linked polyethylene semiconductor. Insulation Cross linked polyethylene XLPE. Insulation shield Cross linked polyethylene removable semiconductor. Insulation and shields are applied by true triple extrusion process. Metallic shield Copper tape helically and overlapped applied over insulation shield, 2.5 mils (0.0635mm) thickness. Jacket Flame retardant polyvinyl chloride PVC. Options EPR or XLPE-TR (Tree retardant XLPE). Copper wires metallic shield. Polyethylene Jacket, PVC SR (Sunlight Resistant) Jacket, PVC Tray Cable type jacket. Moisture barrier against longitudinally migration. Armor for Direct Burial.

Characteristics Operating Temperature Normal continuous operation 90째C for wet or dry locations (105째C optional) Overload 130째C Short circuit 250째C 15


Rated Voltage 45 and 69 kV Insulation Level 100% (133% and 173% optional only for 46 kV)

Applications Distribution of electric energy at 46 and 69 kV, installed at air, underground ducts, raceways, direct buried or tray cables.

Standards CENTELSA’s 46-69 kV single conductors are manufactured in accordance with the following standards: ASTM B496, NTC-ICONTEC 2187. Compact round concentric lay stranded Copper Conductors. ASTM B400, NTC-ICONTEC 4334. Compact round concentric lay stranded Aluminum 1350 Conductors. AEIC CS6. Specification for Ethylene Propylene Rubber Insulated Shielded Power Cables Rated 5 through 69 kV. AEIC CS7. Specification for Cross Linked Polyethylene Insulated Shielded Power Cables Rated 69 through 138 kV.

Certifications CENTELSA’s 46 kV conductors are certified by CTL Laboratories.

Note: Configurations and sizes herein not specified are available upon request.

16


46 kV Single conductors, 90°C (International Unit System) 100% Insulation Level Standards: AEIC CS8 Specification for Extruded Dielectric, Shielded Power Cables Rated 5 through 46 kV. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

4/0 250 300 350 400 450 500 600 750 1000

12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30

35.63 37.01 38.28 39.45 40.54 41.58 42.49 44.67 47.08 50.94

JACKET THICKNESS (mm)

2.79 2.79 2.79 2.79 2.79 2.79 2.79 2.79 2.79 2.79

OVERALL DIAMETER (mm)

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

2565 2821 3199 3495 3786 4075 4356 4945 5772 7141

1889 2022 2240 2376 2508 2636 2758 3027 3374 3944

0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

43.93 45.31 47.44 48.61 49.70 50.74 51.65 53.83 56.24 60.10

0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

21236 19901 18822 17932 17180 16522 15988 14845 13764 12335

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 20 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

46 kV Single conductors, 90°C 100% Insulation Level Standards: AEIC CS8 Specification for Extruded Dielectric, Shielded Power Cables Rated 5 through 46 kV. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

4/0 250 300 350 400 450 500 600 750 1000

475 520 570 616 659 700 736 813 908 1060

0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

445 445 445 445 445 445 445 445 445 445

1403 1457 1507 1553 1596 1637 1673 1759 1854 2006

JACKET THICKNESS (mm)

110 110 110 110 110 110 110 110 110 110

OVERALL DIAMETER (mm)

1729 1784 1868 1914 1957 1998 2033 2119 2214 2366

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

1724 1896 2150 2349 2544 2738 2927 3323 3879 4799

1269 1359 1505 1597 1685 1772 1853 2034 2268 2651

0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.9 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

17

13196 12366 11696 11143 10676 10267 9935 9225 8553 7665


69 kV Single conductors, 90°C (International Unit System) 100% Insulation Level Standards: AEIC CS7 Specification for Cross Linked Polyethylene Insulated Shielded Power Cables Rated 69 through 138 kV, NTC 3599. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

500 600 750 1000

18.69 20.65 23.06 26.92

253.4 304.0 380.0 506.7

16.51 16.51 16.51 16.51

53.15 55.37 57.78 61.64

2.79 2.79 2.79 3.56

62.31 64.53 66.94 72.38

APPROXIMATE TOTAL WEIGHT (kg/km) COPPER

5318 5945 6809 8496

DC RESISTANT AT 20°C1 (ohm/km)

ALUMINUM

COPPER

ALUMINUM

3719 4027 4411 5299

0.0694 0.0578 0.0463 0.0347

0.113 0.0945 0.0756 0.0567

INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm-km)

0.2683 0.2604 0.2521 0.2404

20509 19151 17879 16175

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 20 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

69 kV Single conductors, 90°C 100% Insulation Level Standards: AEIC CS7 Specification for Cross Linked Polyethylene Insulated Shielded Power Cables Rated 69 through 138 kV, NTC 3599.

SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

500 600 750 1000

736 813 908 1060

0.393 0.471 0.589 0.785

650 650 650 650

2093 2180 2275 2427

110 110 110 140

2453 2540 2635 2850

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

3574 3995 4576 5709

2500 2706 2965 3561

0.0212 0.0176 0.0141 0.0106

0.0346 0.0288 0.0230 0.0173

INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm-km)

0.4318 0.4191 0.4057 0.3869

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum.

2. Inductive and capacitive reactance at 60 Hz and a 7.9 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

18

12744 11900 11110 10051


6 - 30 kV Single Conductors

Description Copper or aluminum stranded, thermo set insulated

Construction Conductor Soft Copper or 1350-H19 aluminum, compact stranded. Conductor Shield Cross linked polyethylene semiconductor. Insulation Cross linked polyethylene XLPE. Insulation shield Cross linked polyethylene removable semiconductor. Insulation and shields are applied by true triple extrusion process. Metallic shield Copper tape helically and overlapped applied over insulation shield, 2.5 mils (0.0635mm) thickness. Jacket Flame retardant polyvinyl chloride PVC. Options EPR or XLPE-TR (Tree retardant XLPE) Copper wires metallic shield. Polyethylene Jacket, PVC SR (Sunlight Resistant) Jacket, PVC Tray Cable type jacket. Moisture barrier against longitudinally migration. Armor for Direct Burial.

Characteristics Operating Temperature Normal continuous operation 90째C for wet or dry locations (105째C optional) Overload 130째C Short circuit 250째C 19


Rated Operating Voltage 6, 10, 15, 20 & 30 kV

Applications Distribution of electric energy at Medium Voltage, installed at air, underground ducts, raceways, direct buried or tray cables.

Standards CENTELSA’s 6-30 kV single conductors are manufactured in accordance with the following standards: IEC 60228 Conductors for insulated cables. IEC 60502-2. Power Cables with extruded insulation for voltages form 6 to 30 kV.

Note: Configurations and sizes herein not specified are available upon request.

20


3.6/6 (7.2) kV¹ Single conductors, 90°C

Standards: IEC 60502-2. Power Cables with extruded insulation for voltages from 6 to 30 kV. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

10 16 25 35 50 70 95 120 150 185 240 300 400 500

3.72 4.70 5.88 6.96 8.26 9.77 11.39 12.88 14.40 15.99 18.29 20.45 23.62 26.41

Notes:

CROSS SECTION (mm2)

10.0 16.0 25.0 35.0 50.0 70.0 95.0 120.0 150.0 185.0 240.0 300.0 400.0 500.0

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.60 2.60 2.60 2.60

9.55 10.53 11.71 12.79 14.09 15.60 17.22 18.93 20.45 22.04 24.55 27.35 30.94 34.15

1.40 1.40 1.50 1.50 1.60 1.60 1.70 1.70 1.80 1.80 1.90 2.00 2.20 2.30

OVERALL DIAMETER (mm)

14.43 15.41 16.80 17.88 19.39 20.90 22.73 24.44 26.16 27.75 30.47 34.06 38.02 41.44

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

292 367 482 596 767 982 1255 1525 1844 2199 2777 3462 4512 5545

229 266 324 375 452 540 656 768 898 1032 1263 1569 1988 2391

1.76 1.10 0.703 0.502 0.352 0.251 0.185 0.147 0.117 0.0951 0.0733 0.0586 0.0440 0.0352

2.87 1.80 1.15 0.821 0.575 0.411 0.302 0.239 0.192 0.155 0.120 0.0958 0.0718 0.0575

INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm-km)

0.3943 0.3766 0.3597 0.3470 0.3309 0.3182 0.3066 0.2964 0.2880 0.2801 0.2699 0.2611 0.2503 0.2418

16087 13941 12029 10697 9444 8318 7377 6592 6023 5525 5113 4909 4626 4458

1. Uo / U (Um) voltage designation means: Uo rated voltage phase to neutral, U rated voltage phase to phase and Um maximum voltage. 2. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 3. Inductive and capacitive reactance at 60 Hz, flat configuration, phases 19 cm separated. 4. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

6/10 (12) kV¹ Single conductors, 90°C Standards: IEC 60502-2. Power Cables with extruded insulation for voltages from 6 to 30 kV. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

16 25 35 50 70 95 120 150 185 240 300 400 500

4.70 5.88 6.96 8.26 9.77 11.39 12.88 14.40 15.99 18.29 20.45 23.62 26.41

16.0 25.0 35.0 50.0 70.0 95.0 120.0 150.0 185.0 240.0 300.0 400.0 500.0

3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50

INSULATION JACKET DIAMETER THICKNESS (mm) (mm)

12.59 13.77 14.85 16.15 17.66 19.28 20.99 22.51 24.10 26.40 28.80 31.97 34.76

1.50 1.60 1.60 1.60 1.70 1.70 1.80 1.90 1.90 2.00 2.10 2.20 2.30

OVERALL DIAMETER (mm)

17.68 19.07 20.15 21.45 23.17 24.79 26.70 28.43 30.02 33.11 35.68 39.05 42.05

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

434 554 672 839 1069 1337 1624 1950 2310 2924 3557 4576 5586

333 396 451 523 627 738 867 1003 1143 1410 1665 2052 2432

1.10 0.703 0.502 0.352 0.251 0.185 0.147 0.117 0.0951 0.0733 0.0586 0.0440 0.0352

1.80 1.15 0.821 0.575 0.411 0.302 0.239 0.192 0.155 0.120 0.0958 0.0718 0.0575

INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm-km)

0.3766 0.3597 0.3470 0.3309 0.3182 0.3066 0.2964 0.2880 0.2801 0.2699 0.2611 0.2503 0.2418

Notes: 1. Uo / U (Um) voltage designation means: Uo rated voltage phase to neutral, U rated voltage phase to phase and Um maximum voltage. 2. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 3. Inductive and capacitive reactance at 60 Hz, flat configuration, phases 7.5" separated. 4. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

21

17650 15393 13797 12277 10892 9723 8736 8015 7380 6622 5982 5305 4826


8.7/15 (17.5) kV¹ Single conductors, 90°C

Standards: IEC 60502-2. Power Cables with extruded insulation for voltages from 6 to 30 kV. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

25 35 50 70 95 120 150 185 240 300 400 500

5.88 6.96 8.26 9.77 11.39 12.88 14.40 15.99 18.29 20.45 23.62 26.41

25.0 35.0 50.0 70.0 95.0 120.0 150.0 185.0 240.0 300.0 400.0 500.0

4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50 4.50

15.74 16.82 18.12 19.63 21.25 22.96 24.48 26.07 28.37 30.77 33.94 36.73

1.60 1.70 1.70 1.80 1.80 1.90 1.90 2.00 2.10 2.20 2.30 2.40

21.04 22.33 23.63 25.34 26.96 28.88 30.40 32.78 35.25 37.85 41.23 44.22

Notes:

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

621 753 924 1160 1434 1727 2045 2462 3046 3692 4722 5742

464 532 609 719 834 970 1098 1295 1532 1799 2198 2588

0.703 0.502 0.352 0.251 0.185 0.147 0.117 0.0951 0.0733 0.0586 0.0440 0.0352

1.15 0.821 0.575 0.411 0.302 0.239 0.192 0.155 0.120 0.0958 0.0718 0.0575

INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm-km)

0.3597 0.3470 0.3309 0.3182 0.3066 0.2964 0.2880 0.2801 0.2699 0.2611 0.2503 0.2418

18169 16383 14666 13088 11742 10598 9757 9011 8116 7355 6547 5970

1. Uo / U (Um) voltage designation means: Uo rated voltage phase to neutral, U rated voltage phase to phase and Um maximum voltage. 2. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 3. Inductive and capacitive reactance at 60 Hz, flat configuration, phases 19 cm separated. 4. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

12/20 (24) kV¹ Single conductors, 90°C Standards: IEC 60502-2. Power Cables with extruded insulation for voltages from 6 to 30 kV. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

35 50 70 95 120 150 185 240 300 400 500

6.96 8.26 9.77 11.39 12.88 14.40 15.99 18.29 20.45 23.62 26.41

35.0 50.0 70.0 95.0 120.0 150.0 185.0 240.0 300.0 400.0 500.0

5.50 5.50 5.50 5.50 5.50 5.50 5.50 5.50 5.50 5.50 5.50

18.86 20.16 21.67 23.29 25.00 26.52 28.11 30.41 32.81 35.98 38.77

1.70 1.80 1.80 1.90 1.90 2.00 2.10 2.20 2.20 2.30 2.50

24.37 25.87 27.38 29.21 30.92 33.23 34.99 37.49 39.89 43.27 47.33

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

833 1020 1249 1541 1827 2202 2587 3183 3819 4860 5989

612 704 808 942 1070 1256 1420 1669 1927 2336 2835

0.502 0.352 0.251 0.185 0.147 0.117 0.0951 0.0733 0.0586 0.0440 0.0352

0.821 0.575 0.411 0.302 0.239 0.192 0.155 0.120 0.0958 0.0718 0.0575

0.3470 0.3309 0.3182 0.3066 0.2964 0.2880 0.2801 0.2699 0.2611 0.2503 0.2418

18759 16881 15140 13645 12365 11419 10575 9557 8688 7758 7092

Notes: 1. Uo / U (Um) voltage designation means: Uo rated voltage phase to neutral, U rated voltage phase to phase and Um maximum voltage. 2. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 3. Inductive and capacitive reactance at 60 Hz, flat configuration, phases 7.5" separated. 4. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

22


18/30 (36) kV¹ Single conductors, 90°C

Standards: IEC 60502-2. Power Cables with extruded insulation for voltages from 6 to 30 kV. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm2)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

50 70 95 120 150 185 240 300 400 500

8.26 9.77 11.39 12.88 14.40 15.99 18.29 20.45 23.62 26.41

50.0 70.0 95.0 120.0 150.0 185.0 240.0 300.0 400.0 500.0

8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00

25.10 26.61 28.23 29.94 31.46 33.05 35.35 37.75 40.92 43.71

1.90 2.00 2.10 2.10 2.20 2.20 2.30 2.40 2.60 2.60

31.02 33.32 35.11 36.82 38.54 40.13 42.64 45.24 49.69 52.48

Notes:

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C1 INDUCTIVE CAPACITIVE REACTANCE2 REACTANCE2 (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

1264 1558 1864 2166 2519 2904 3520 4196 5369 6405

949 1116 1265 1409 1573 1737 2006 2303 2845 3251

0.352 0.251 0.185 0.147 0.117 0.0951 0.0733 0.0586 0.0440 0.0352

0.575 0.411 0.302 0.239 0.192 0.155 0.120 0.0958 0.0718 0.0575

0.3309 0.3182 0.3066 0.2964 0.2880 0.2801 0.2699 0.2611 0.2503 0.2418

1. Uo / U (Um) voltage designation means: Uo rated voltage phase to neutral, U rated voltage phase to phase and Um maximum voltage. 2. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 3. Inductive and capacitive reactance at 60 Hz, flat configuration, phases 19 cm separated. 4. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

23

21431 19403 17638 16109 14965 13936 12682 11599 10429 9582


MV-90 5 - 35 kV Three Conductors

Description Three phases copper or aluminum stranded, thermo set insulated, stranded and with common PVC jacket.

Contruction Conductor Soft Copper or 1350-H19 aluminum, compact stranded. Conductor Shield Cross linked polyethylene semiconductor. Insulation Cross linked polyethylene XLPE. Insulation shield Cross linked polyethylene removable semiconductor. Insulation and shields are applied by true triple extrusion process. Metallic shield Copper tape helically and overlapped applied over insulation shield, 2.5 mils (0.0635mm) thickness. Filler Flame retardant polyvinyl chloride PVC, applied over the three stranded phases. Jacket Flame retardant polyvinyl chloride PVC. Options EPR or XLPE-TR (Tree retardant XLPE) Copper wires metallic shield. Polyethylene Jacket, PVC SR (Sunlight Resistant) Jacket, PVC Tray Cable type jacket. Moisture barrier against longitudinally migration. Ground conductors laid on interstices. Armor for Direct Burial. 24


Characteristics Operating Temperature Normal continuous operation 90°C for wet or dry locations (105°C optional) Overload 130°C Short circuit 250°C Rated Voltage 5, 8, 15, 25 and 35 kV. Insulation Level 100% (133% and 173% optional).

Applications Distribution of electric energy at Medium Voltage, installed at air, underground ducts, raceways, direct buried or tray cables.

Standards CENTELSA’s 5-35 kV three conductors are manufactured in accordance with the following standards: ASTM B496, NTC-ICONTEC 2187. Compact round concentric lay stranded Copper Conductors. ASTM B400, NTC-ICONTEC 4334. Compact round concentric lay stranded Aluminum 1350 Conductors. UL 1072. Medium Voltage Power Cables MV90. ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. AEIC CS8. Specification for Extruded Dielectric, Shielded Power Cables Rated 5 through 46 kV.

25


Certifications CENTELSA’s 5-35 kV single conductors are certified by: UL 1072. File E167359. ICONTEC (Colombia). NTC 2186 standard CIDET (Colombia). Cert. 00412. 15 kV Medium Voltage Copper, XLPE

Note: Configurations and sizes herein not specified are available upon request.

MV-90 5 kV Three conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (mm²) (mm) (mm)

3.40 4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

8.4 13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29

8.86 9.75 10.87 12.27 13.05 13.99 15.01 16.20 17.53 18.91 20.18 21.35 22.44 23.48 24.39 26.57 28.98 32.84 Notes:

26

DIAMETER FILLER OVER THICKNESS TRANDED (mm) PHASE (mm)

23.34 25.26 27.67 30.69 32.37 34.39 36.59 39.16 42.02 45.00 47.73 50.26 52.60 54.85 56.81 62.75 67.95 76.27

0.50 0.50 0.50 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

JACKET THICKNESS (mm)

2.03 2.03 2.03 2.03 2.03 2.03 2.79 2.79 2.79 2.79 2.79 2.79 2.79 2.79 2.79 3.56 3.56 3.56

OVERALL DIAMETER (mm)

28.52 30.44 32.85 36.87 38.55 40.58 44.34 46.90 49.77 52.74 55.48 58.00 60.35 62.59 64.55 72.09 77.28 85.60

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ INDUCTIVE CAPACITIVE REACTANCE² REACTANCE² (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

1101 1339 1688 2297 2638 3072 3755 4423 5245 6023 6938 7842 8737 9628 10498 12786 -

941 1084 1284 1654 1828 2050 2466 2797 3196 3601 4032 4452 4863 5269 5655 6975 8145 10113

2.12 1.34 0.840 0.528 0.419 0.332 0.263 0.209 0.166 0.140 0.117 0.100 0.0876 0.0779 0.0701 0.0584 -

3.47 2.18 1.37 0.863 0.684 0.543 0.430 0.341 0.271 0.229 0.191 0.164 0.143 0.127 0.115 0.0955 0.0764 0.0573

0.1638 0.1522 0.1416 0.1320 0.1246 0.1204 0.1165 0.1128 0.1093 0.1067 0.1042 0.1022 0.1006 0.0992 0.0981 0.0977 0.0954 0.0924

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

15795 13740 11824 10081 9319 8544 7838 7150 6512 5961 5531 5187 4902 4659 4465 4060 3691 3221


MV-90 5 kV Three conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm²)

8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

134 169 213 268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0130 0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

Notes:

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

349 384 428 483 514 551 591 638 690 744 794 841 883 924 960 1046 1141 1293

DIAMETER OVER TRANDED PHASE (mm)

919 994 1089 1208 1274 1354 1441 1542 1654 1772 1879 1979 2071 2159 2236 2471 2675 3003

FILLER JACKET THICKNESS THICKNESS (mm) (mm)

20 20 20 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39

80 80 80 80 80 80 110 110 110 110 110 110 110 110 110 140 140 140

OVERALL DIAMETER (mm)

1123 1198 1293 1452 1518 1598 1746 1847 1959 2077 2184 2284 2376 2464 2542 2838 3043 3370

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ INDUCTIVE CAPACITIVE REACTANCE² REACTANCE² (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

740 900 1134 1544 1773 2065 2524 2972 3525 4048 4663 5270 5872 6470 7055 8593 -

632 729 863 1112 1228 1378 1657 1880 2148 2420 2710 2992 3268 3541 3800 4687 5474 6796

0.647 0.407 0.256 0.161 0.128 0.101 0.0803 0.0637 0.0505 0.0427 0.0356 0.0305 0.0267 0.0237 0.0214 0.0178 -

1.06 0.665 0.418 0.263 0.209 0.165 0.131 0.104 0.0825 0.0698 0.0582 0.0499 0.0436 0.0388 0.0349 0.0291 0.0233 0.0175

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

27

0.2635 0.2449 0.2278 0.2125 0.2005 0.1937 0.1876 0.1815 0.1759 0.1717 0.1677 0.1645 0.1619 0.1597 0.1579 0.1572 0.1535 0.1487

9815 8538 7347 6264 5791 5309 4870 4443 4046 3704 3437 3223 3046 2895 2774 2523 2293 2002


MV-90 8 kV Three conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm²)

6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92

11.05 12.17 13.57 14.35 15.29 16.31 17.50 18.83 20.21 21.48 22.65 23.74 24.78 25.69 27.87 30.28 34.14 Notes:

DIAMETER OVER TRANDED PHASE (mm)

28.06 30.47 33.49 35.17 37.20 39.39 41.96 44.83 47.80 50.54 53.06 55.41 57.65 60.86 65.56 70.75 79.07

FILLER JACKET THICKNESS THICKNESS (mm) (mm)

0.50 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

2.03 2.03 2.03 2.03 2.79 2.79 2.79 2.79 2.79 2.79 2.79 2.79 2.79 2.79 3.56 3.56 3.56

OVERALL DIAMETER (mm)

33.24 36.65 39.67 41.35 44.94 47.14 49.71 52.57 55.55 58.28 60.80 63.15 65.39 68.61 74.89 80.08 88.40

APPROXIMATE TOTAL WEIGHT (kg/km) COPPER

ALUMINUM

1519 1972 2513 2863 3464 4011 4692 5529 6322 7251 8168 9075 9978 11042 13188 -

1265 1567 1870 2052 2442 2722 3067 3480 3901 4346 4778 5201 5619 6199 7377 8574 10584

DC RESISTANT AT 20°C¹ INDUCTIVE CAPACITIVE REACTANCE² REACTANCE² (ohm/km) (ohm/km) (ohm-km) COPPER ALUMINUM

1.34 0.840 0.528 0.419 0.332 0.263 0.209 0.166 0.140 0.117 0.100 0.0876 0.0779 0.0701 0.0584 -

2.18 1.37 0.863 0.684 0.543 0.430 0.341 0.271 0.229 0.191 0.164 0.143 0.127 0.115 0.0955 0.0764 0.0573

0.1601 0.1488 0.1386 0.1309 0.1263 0.1221 0.1180 0.1142 0.1112 0.1085 0.1063 0.1045 0.1030 0.1033 0.1010 0.0984 0.0951

16338 14169 12171 11291 10388 9562 8752 7997 7341 6827 6414 6071 5778 5543 5052 4601 4027

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 8 kV Three conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

169 213 268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115

435 479 534 565 602 642 689 741 796 846 892 935 976 1011 1097 1192 1344 Notes:

28

DIAMETER OVER TRANDED PHASE (mm)

1105 1200 1318 1385 1464 1551 1652 1765 1882 1990 2089 2181 2270 2396 2581 2785 3113

FILLER JACKET THICKNESS THICKNESS (mm) (mm)

20 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39

80 80 80 80 110 110 110 110 110 110 110 110 110 110 140 140 140

OVERALL DIAMETER (mm)

1309 1443 1562 1628 1769 1856 1957 2070 2187 2295 2394 2486 2575 2701 2948 3153 3480

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ INDUCTIVE CAPACITIVE REACTANCE² REACTANCE² (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

1021 1325 1689 1924 2328 2696 3153 3716 4249 4873 5489 6099 6705 7421 8863 -

850 1053 1257 1379 1641 1830 2061 2339 2621 2920 3211 3495 3776 4166 4958 5762 7113

0.407 0.256 0.161 0.128 0.101 0.0803 0.0637 0.0505 0.0427 0.0356 0.0305 0.0267 0.0237 0.0214 0.0178 -

0.665 0.418 0.263 0.209 0.165 0.131 0.104 0.0825 0.0698 0.0582 0.0499 0.0436 0.0388 0.0349 0.0291 0.0233 0.0175

0.2577 0.2395 0.2231 0.2106 0.2032 0.1965 0.1899 0.1838 0.1790 0.1746 0.1711 0.1682 0.1657 0.1662 0.1625 0.1584 0.1531

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

10152 8804 7563 7016 6455 5942 5438 4969 4562 4242 3985 3773 3590 3444 3139 2859 2502


MV-90 15 kV Three conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45

16.63 17.41 18.35 19.37 20.56 21.89 23.27 24.54 25.71 26.80 27.84 28.75 30.93 33.34 37.20

DIAMETER OVER TRANDED PHASE (mm)

40.08 41.76 43.79 45.99 48.55 51.42 54.39 57.13 60.90 63.25 65.49 67.45 72.15 77.34 85.66

FILLER JACKET THICKNESS THICKNESS (mm) (mm)

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

2.79 2.79 2.79 2.79 2.79 2.79 2.79 2.79 2.79 3.56 3.56 3.56 3.56 3.56 3.56

OVERALL DIAMETER (mm)

47.83 49.51 51.54 53.74 56.30 59.17 62.14 64.88 68.65 72.58 74.83 76.79 81.48 86.68 95.00

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ INDUCTIVE CAPACITIVE REACTANCE² REACTANCE² (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

3245 3621 4097 4671 5383 6255 7084 8046 9178 10378 11321 12238 14191 -

2602 2810 3075 3382 3758 4205 4662 5140 5788 6504 6963 7395 8380 9640 11751

0.528 0.419 0.332 0.263 0.209 0.166 0.140 0.117 0.100 0.0876 0.0779 0.0701 0.0584 -

0.863 0.684 0.543 0.430 0.341 0.271 0.229 0.191 0.164 0.143 0.127 0.115 0.0955 0.0764 0.0573

0.1522 0.1438 0.1386 0.1338 0.1290 0.1245 0.1210 0.1178 0.1167 0.1145 0.1126 0.1110 0.1082 0.1051 0.1012

16393 15303 14175 13131 12097 11123 10268 9592 9044 8588 8195 7879 7214 6600 5809

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 15 kV Three conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

175 175 175 175 175 175 175 175 175 175 175 175 175 175 175

655 685 722 763 809 862 916 966 1012 1055 1096 1132 1218 1313 1465

DIAMETER OVER TRANDED PHASE (mm)

1578 1644 1724 1811 1912 2024 2141 2249 2398 2490 2578 2656 2841 3045 3373

FILLER JACKET THICKNESS THICKNESS (mm) (mm)

39 39 39 39 39 39 39 39 39 39 39 39 39 39 39

110 110 110 110 110 110 110 110 110 140 140 140 140 140 140

OVERALL DIAMETER (mm)

1883 1949 2029 2116 2217 2329 2446 2554 2703 2858 2946 3023 3208 3413 3740

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ INDUCTIVE CAPACITIVE REACTANCE² REACTANCE² (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

2181 2433 2753 3139 3618 4204 4761 5407 6168 6974 7608 8224 9537 -

1749 1889 2066 2273 2525 2826 3133 3455 3890 4371 4679 4970 5631 6478 7897

0.161 0.128 0.101 0.0803 0.0637 0.0505 0.0427 0.0356 0.0305 0.0267 0.0237 0.0214 0.0178 -

0.263 0.209 0.165 0.131 0.104 0.0825 0.0698 0.0582 0.0499 0.0436 0.0388 0.0349 0.0291 0.0233 0.0175

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

29

0.2449 0.2315 0.2231 0.2153 0.2076 0.2004 0.1947 0.1895 0.1878 0.1843 0.1812 0.1787 0.1741 0.1692 0.1628

10186 9509 8808 8160 7517 6912 6381 5960 5620 5337 5092 4896 4483 4101 3610


MV-90 25 kV Three conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60

21.67 22.61 23.63 24.82 26.15 27.53 28.80 29.97 31.06 32.10 33.01 35.19 37.60 41.46 Notes:

DIAMETER OVER TRANDED PHASE (mm)

50.95 52.97 55.17 57.73 61.85 64.82 67.56 70.08 72.43 74.67 76.63 81.33 86.52 96.70

FILLER THICKNESS (mm)

JACKET OVERALL THICKNESS DIAMETER (mm) (mm)

APPROXIMATE TOTAL WEIGHT (kg/km) COPPER

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

2.79 2.79 2.79 2.79 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56

58.69 60.72 62.92 65.48 69.60 72.57 76.89 79.42 81.76 84.01 85.97 90.66 95.86 106.03

4601 5111 5723 6478 7585 8472 9761 10767 11757 12738 13688 -

DC RESISTANT AT 20°C¹ INDUCTIVE CAPACITIVE REACTANCE² REACTANCE² (ohm/km) (ohm/km) (ohm-km)

ALUMINUM COPPER

3791 4089 4434 4852 5535 6050 6855 7377 7883 8379 8845 9909 11256 13926

0.419 0.332 0.263 0.209 0.166 0.140 0.117 0.100 0.0876 0.0779 0.0701 -

ALUMINUM

0.684 0.543 0.430 0.341 0.271 0.229 0.191 0.164 0.143 0.127 0.115 0.0955 0.0764 0.0573

0.1588 0.1530 0.1475 0.1421 0.1385 0.1342 0.1304 0.1273 0.1247 0.1225 0.1207 0.1172 0.1136 0.1103

19847 18509 17258 16006 14814 13758 12915 12227 11651 11150 10747 9893 9096 8060

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 25 kV Three conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

260 260 260 260 260 260 260 260 260 260 260 260 260 260

853 890 930 977 1030 1084 1134 1180 1223 1264 1300 1385 1480 1632 Notes:

30

DIAMETER FILLER OVER THICKNESS TRANDED (mm) PHASE (mm)

2006 2085 2172 2273 2435 2552 2660 2759 2852 2940 3017 3202 3406 3807

39 39 39 39 39 39 39 39 39 39 39 39 39 39

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

110 110 110 110 140 140 140 140 140 140 140 140 140 140

2311 2390 2477 2578 2740 2857 3027 3127 3219 3307 3385 3569 3774 4174

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ INDUCTIVE CAPACITIVE REACTANCE² REACTANCE² (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

3092 3435 3846 4353 5097 5693 6560 7236 7901 8561 9199 -

2548 2748 2980 3261 3720 4066 4607 4958 5297 5631 5944 6659 7565 9359

0.128 0.101 0.0803 0.0637 0.0505 0.0427 0.0356 0.0305 0.0267 0.0237 0.0214 -

0.209 0.165 0.131 0.104 0.0825 0.0698 0.0582 0.0499 0.0436 0.0388 0.0349 0.0291 0.0233 0.0175

0.2556 0.2461 0.2374 0.2286 0.2228 0.2160 0.2099 0.2049 0.2007 0.1971 0.1942 0.1887 0.1828 0.1775

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

12333 11501 10724 9946 9205 8549 8025 7598 7240 6929 6678 6147 5652 5008


MV-90 35 kV Three conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06

53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76

26.97 27.99 29.18 30.51 31.89 33.16 34.33 35.42 36.46 37.37 39.55 41.96

DIAMETER OVER TRANDED PHASE (mm)

63.62 65.81 68.38 71.25 74.22 76.96 79.48 81.83 84.07 86.03 92.58 97.77

FILLER THICKNESS (mm)

JACKET THICKNESS (mm)

OVERALL DIAMETER (mm)

APPROXIMATE TOTAL WEIGHT (kg/km) COPPER

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56

72.95 75.15 77.71 80.58 83.55 86.29 88.81 91.16 93.40 95.36 101.91 107.11

6761 7424 8239 9227 10176 11249 12298 13329 14349 -

DC RESISTANT AT 20°C¹ INDUCTIVE CAPACITIVE REACTANCE² REACTANCE² (ohm/km) (ohm/km) (ohm-km)

ALUMINUM COPPER

5739 6135 6614 7178 7754 8343 8908 9454 9990 10489 12036 13494

0.332 0.263 0.209 0.166 0.140 0.117 0.100 0.0876 0.0779 -

ALUMINUM

0.543 0.430 0.341 0.271 0.229 0.191 0.164 0.143 0.127 0.115 0.0955 0.0764

0.1668 0.1608 0.1548 0.1491 0.1444 0.1402 0.1368 0.1339 0.1314 0.1294 0.1270 0.1228

22170 20773 19366 18016 16810 15841 15047 14378 13794 13323 12318 11374

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 35 kV Three conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

336 376 423 475 520 570 616 659 700 736 813 908

0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589

345 345 345 345 345 345 345 345 345 345 345 345

1062 1102 1149 1201 1256 1306 1352 1394 1435 1471 1557 1652

DIAMETER FILLER OVER THICKNESS TRANDED (mm) PHASE (mm)

2505 2591 2692 2805 2922 3030 3129 3222 3310 3387 3645 3849

39 39 39 39 39 39 39 39 39 39 39 39

JACKET OVERALL THICKNESS DIAMETER (mm) (mm)

140 140 140 140 140 140 140 140 140 140 140 140

2872 2959 3060 3172 3289 3397 3496 3589 3677 3754 4012 4217

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ INDUCTIVE CAPACITIVE REACTANCE² REACTANCE² (ohm/km) (ohm/km) (ohm-km)

COPPER

ALUMINUM

COPPER

ALUMINUM

4544 4989 5537 6201 6839 7560 8265 8957 9643 -

3857 4123 4445 4824 5211 5607 5987 6354 6714 7049 8089 9068

0.101 0.0803 0.0637 0.0505 0.0427 0.0356 0.0305 0.0267 0.0237 -

0.165 0.131 0.104 0.0825 0.0698 0.0582 0.0499 0.0436 0.0388 0.0349 0.0291 0.0233

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

31

0.2684 0.2588 0.2492 0.2400 0.2324 0.2257 0.2201 0.2155 0.2115 0.2082 0.2044 0.1976

13776 12908 12034 11195 10446 9844 9350 8934 8572 8279 7654 7068


MV-90 5 - 35 kV Triplexed Conductors

Description Three phases copper or aluminum stranded, thermo set insulated.

Contruction Conductor Soft Copper or 1350-H19 aluminum, compact stranded. Conductor Shield Cross linked polyethylene semiconductor. Insulation Cross linked polyethylene XLPE. Insulation shield Cross linked polyethylene removable semiconductor. Insulation and shields are applied by true triple extrusion process. Metallic shield Copper tape helically and overlapped applied over insulation shield, 2.5 mils (0.0635mm) thickness. Jacket Flame retardant polyvinyl chloride PVC. Options EPR or XLPE-TR (Tree retardant XLPE) Copper wires metallic shield. Polyethylene Jacket, PVC SR (Sunlight Resistant) Jacket, PVC Tray Cable type jacket. Moisture barrier against longitudinally migration.

32


Characteristics Operating Temperature Normal continuous operation 90°C for wet or dry locations (105°C optional) Overload 130°C Short circuit 250°C Rated Voltage 5, 8, 15, 25 and 35 kV. Insulation Level 100% (133% and 173% optional).

Applications Distribution of electric energy at Medium Voltage, installed at air, underground ducts, raceways, direct buried or tray cables.

Standards CENTELSA’s 5-35 kV three conductors are manufactured in accordance with the following standards: ASTM B496, NTC-ICONTEC 2187. Compact round concentric lay stranded Copper Conductors. ASTM B400, NTC-ICONTEC 4334. Compact round concentric lay stranded Aluminum 1350 Conductors. UL 1072. Medium Voltage Power Cables MV90. ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. AEIC CS8. Specification for Extruded Dielectric, Shielded Power Cables Rated 5 through 46 kV.

33


Certifications CENTELSA’s 5-35 kV Triplex conductors are certified by: UL 1072. File E167359. ICONTEC (Colombia). NTC 2186 standard CIDET (Colombia). Cert. 00412. 15 kV Medium Voltage Copper, XLPE CIDET (Colombia). Cert. 00413. 35 kV Medium Voltage Copper, XLPE CIDET (Colombia). Cert. 00414. 15 kV Medium Voltage Copper, EPR CIDET (Colombia). Cert. 00415. 35 kV Medium Voltage Copper, EPR

Note: Configurations and sizes herein not specified are available upon request.

MV-90 5 kV Triplexed conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm²)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

JACKET DIAMETER (mm)

DIAMETER OVER TRANDED PHASE (mm)

8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

3.40 4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

8.4 13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29

8.86 9.75 10.87 12.27 13.05 13.99 15.01 16.20 17.53 18.91 20.18 21.35 22.44 23.48 24.39 26.57 28.98 32.84

1.14 1.52 1.52 1.52 1.52 1.52 1.52 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

13.20 14.88 16.00 17.40 18.18 19.12 20.14 22.35 23.68 25.06 26.33 27.50 28.59 29.63 30.54 33.30 35.71 39.57

28.45 32.07 34.48 37.50 39.18 41.21 43.41 48.17 51.04 54.01 56.75 59.27 61.62 63.86 65.82 71.77 76.96 85.28

Notes:

34

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

742 1008 1296 1729 2015 2380 2828 3542 4246 4894 5682 6464 7239 8012 8775 10460 12736 16518

582 754 891 1086 1205 1357 1539 1916 2197 2472 2776 3074 3365 3653 3932 4648 5471 6832

2.12 1.34 0.840 0.528 0.419 0.332 0.263 0.209 0.166 0.140 0.117 0.100 0.0876 0.0779 0.0701 0.0584 0.0467 0.0351

3.47 2.18 1.37 0.863 0.684 0.543 0.430 0.341 0.271 0.229 0.191 0.164 0.143 0.127 0.115 0.0955 0.0764 0.0573

INDUCTIVE REACTANCE² (ohm/km)

CAPACITIVE REACTANCE² (ohm-km)

0.1787 0.1702 0.1582 0.1471 0.1390 0.1340 0.1294 0.1284 0.1240 0.1204 0.1173 0.1147 0.1125 0.1107 0.1092 0.1078 0.1048 0.1008

15795 13740 11824 10081 9319 8544 7838 7150 6512 5961 5531 5187 4902 4659 4465 4060 3691 3221

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.


MV-90 5 kV Triplexed conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (sq inches)

134 169 213 268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0130 0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

JACKET DIAMETER (mm)

DIAMETER OVER TRANDED PHASE (mm)

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

349 384 428 483 514 551 591 638 690 744 794 841 883 924 960 1046 1141 1293

45 60 60 60 60 60 60 80 80 80 80 80 80 80 80 80 80 80

520 586 630 685 716 753 793 880 932 987 1037 1083 1126 1167 1202 1311 1406 1558

1120 1263 1358 1476 1543 1622 1709 1896 2009 2126 2234 2333 2426 2514 2591 2825 3030 3357

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

498 677 871 1162 1354 1599 1901 2380 2854 3289 3819 4344 4865 5384 5897 7030 8559 11101

391 506 599 730 810 912 1035 1288 1476 1661 1866 2066 2261 2455 2642 3124 3677 4592

0.647 0.407 0.256 0.161 0.128 0.101 0.0803 0.0637 0.0505 0.0427 0.0356 0.0305 0.0267 0.0237 0.0214 0.0178 0.0142 0.0107

1.06 0.665 0.418 0.263 0.209 0.165 0.131 0.104 0.0825 0.0698 0.0582 0.0499 0.0436 0.0388 0.0349 0.0291 0.0233 0.0175

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

35

INDUCTIVE REACTANCE² (ohm/km)

CAPACITIVE REACTANCE² (ohm-km)

0.2876 0.2739 0.2545 0.2368 0.2237 0.2157 0.2083 0.2067 0.1995 0.1938 0.1887 0.1845 0.1811 0.1781 0.1757 0.1735 0.1686 0.1623

9815 8538 7347 6264 5791 5309 4870 4443 4046 3704 3437 3223 3046 2895 2774 2523 2293 2002


MV-90 8 kV Triplexed conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm²)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

JACKET DIAMETER (mm)

DIAMETER OVER TRANDED PHASE (mm)

6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92

11.05 12.17 13.57 14.35 15.29 16.31 17.50 18.83 20.21 21.48 22.65 23.74 24.78 25.69 27.87 30.28 34.14

1.52 1.52 1.52 1.52 1.52 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

16.18 17.30 18.70 19.48 20.42 22.46 23.65 24.98 26.36 27.63 28.80 29.89 30.93 32.42 34.60 37.01 40.87

34.87 37.29 40.30 41.98 44.01 48.41 50.97 53.84 56.81 59.55 62.07 64.42 66.66 69.87 74.57 79.76 88.08

Notes:

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

1116 1410 1852 2143 2512 3121 3696 4408 5063 5859 6647 7429 8207 9086 10678 12967 16772

862 1006 1209 1332 1490 1832 2070 2359 2642 2953 3257 3555 3849 4243 4866 5703 7086

1.34 0.840 0.528 0.419 0.332 0.263 0.209 0.166 0.140 0.117 0.100 0.0876 0.0779 0.0701 0.0584 0.0467 0.0351

2.18 1.37 0.863 0.684 0.543 0.430 0.341 0.271 0.229 0.191 0.164 0.143 0.127 0.115 0.0955 0.0764 0.0573

INDUCTIVE REACTANCE² (ohm/km)

CAPACITIVE REACTANCE² (ohm-km)

0.1765 0.1641 0.1526 0.1442 0.1390 0.1376 0.1327 0.1280 0.1243 0.1209 0.1182 0.1159 0.1139 0.1137 0.1107 0.1074 0.1033

16338 14169 12171 11291 10388 9562 8752 7997 7341 6827 6414 6071 5778 5543 5052 4601 4027

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 8 kV Triplexed conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS DIAMETER SECTION (mm) (sq inches)

169 213 268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

JACKET DIAMETER (mm)

DIAMETER OVER TRANDED PHASE (mm)

115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115

435 479 534 565 602 642 689 741 796 846 892 935 976 1011 1097 1192 1344

60 60 60 60 60 80 80 80 80 80 80 80 80 80 80 80 80

637 681 736 767 804 884 931 984 1038 1088 1134 1177 1218 1276 1362 1457 1609

1373 1468 1587 1653 1733 1906 2007 2120 2237 2344 2444 2536 2624 2751 2936 3140 3468

Notes:

36

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

750 948 1245 1440 1688 2097 2484 2962 3403 3938 4467 4993 5516 6106 7176 8714 11271

579 676 813 895 1001 1231 1391 1585 1775 1985 2189 2389 2586 2852 3270 3832 4762

0.407 0.256 0.161 0.128 0.101 0.0803 0.0637 0.0505 0.0427 0.0356 0.0305 0.0267 0.0237 0.0214 0.0178 0.0142 0.0107

0.665 0.418 0.263 0.209 0.165 0.131 0.104 0.0825 0.0698 0.0582 0.0499 0.0436 0.0388 0.0349 0.0291 0.0233 0.0175

INDUCTIVE REACTANCE² (ohm/km)

CAPACITIVE REACTANCE² (ohm-km)

0.2840 0.2640 0.2455 0.2321 0.2237 0.2215 0.2135 0.2060 0.2000 0.1945 0.1901 0.1865 0.1833 0.1830 0.1781 0.1729 0.1662

10152 8804 7563 7016 6455 5942 5438 4969 4562 4242 3985 3773 3590 3444 3139 2859 2502

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.


MV-90 15 kV Triplexed conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

CROSS SECTION (mm²)

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

JACKET DIAMETER (mm)

DIAMETER OVER TRANDED PHASE (mm)

2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45

16.63 17.41 18.35 19.37 20.56 21.89 23.27 24.54 25.71 26.80 27.84 28.75 30.93 33.34 37.20

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79

22.78 23.56 24.50 25.52 26.71 28.04 29.42 30.69 32.44 33.53 34.57 35.48 37.66 40.07 45.50

49.10 50.78 52.80 55.00 57.57 60.43 63.41 66.14 69.91 72.26 74.50 76.46 81.16 86.36 98.05

Notes:

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

2326 2633 3022 3497 4088 4818 5492 6305 7219 8019 8815 9598 11219 13541 17878

1683 1822 1999 2208 2463 2769 3071 3399 3829 4145 4456 4755 5407 6276 8192

0.528 0.419 0.332 0.263 0.209 0.166 0.140 0.117 0.100 0.0876 0.0779 0.0701 0.0584 0.0467 0.0351

0.863 0.684 0.543 0.430 0.341 0.271 0.229 0.191 0.164 0.143 0.127 0.115 0.0955 0.0764 0.0573

INDUCTIVE REACTANCE² (ohm/km)

CAPACITIVE REACTANCE² (ohm-km)

0.1675 0.1586 0.1527 0.1473 0.1419 0.1367 0.1325 0.1288 0.1271 0.1245 0.1223 0.1205 0.1171 0.1134 0.1113

16393 15303 14175 13131 12097 11123 10268 9592 9044 8588 8195 7879 7214 6600 5809

INDUCTIVE REACTANCE² (ohm/km)

CAPACITIVE REACTANCE² (ohm-km)

0.2695 0.2552 0.2458 0.2370 0.2283 0.2200 0.2133 0.2073 0.2046 0.2004 0.1968 0.1939 0.1884 0.1826 0.1792

10186 9509 8808 8160 7517 6912 6381 5960 5620 5337 5092 4896 4483 4101 3610

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 15 kV Triplexed conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (sq inches)

268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

JACKET DIAMETER (mm)

DIAMETER OVER TRANDED PHASE (mm)

175 175 175 175 175 175 175 175 175 175 175 175 175 175 175

655 685 722 763 809 862 916 966 1012 1055 1096 1132 1218 1313 1465

80 80 80 80 80 80 80 80 80 80 80 80 80 80 110

897 928 965 1005 1052 1104 1158 1208 1277 1320 1361 1397 1483 1578 1791

1933 1999 2079 2165 2266 2379 2496 2604 2752 2845 2933 3010 3195 3400 3860

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

1563 1769 2031 2350 2747 3238 3691 4237 4852 5389 5924 6450 7539 9100 12015

1131 1225 1344 1484 1655 1861 2064 2284 2573 2786 2995 3196 3634 4218 5505

0.161 0.128 0.101 0.0803 0.0637 0.0505 0.0427 0.0356 0.0305 0.0267 0.0237 0.0214 0.0178 0.0142 0.0107

0.263 0.209 0.165 0.131 0.104 0.0825 0.0698 0.0582 0.0499 0.0436 0.0388 0.0349 0.0291 0.0233 0.0175

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

37


MV-90 25 kV Triplexed conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750

7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06

CROSS SECTION (mm²)

42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60

21.67 22.61 23.63 24.82 26.15 27.53 28.80 29.97 31.06 32.10 33.01 35.19 37.60

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79 2.79

Notes:

JACKET DIAMETER (mm)

27.82 28.76 29.78 30.97 32.88 34.26 35.53 36.70 37.79 38.83 39.74 43.49 45.90

DIAMETER OVER TRANDED PHASE (mm)

59.96 61.98 64.18 66.75 70.86 73.84 76.57 79.09 81.44 83.68 85.64 93.72 98.91

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

3189 3595 4089 4703 5570 6274 7114 7944 8764 9579 10379 12500 14893

2378 2573 2800 3077 3520 3852 4208 4554 4890 5220 5536 6688 7628

0.419 0.332 0.263 0.209 0.166 0.140 0.117 0.100 0.0876 0.0779 0.0701 0.0584 0.0467

0.684 0.543 0.430 0.341 0.271 0.229 0.191 0.164 0.143 0.127 0.115 0.0955 0.0764

INDUCTIVE REACTANCE² (ohm/km)

CAPACITIVE REACTANCE² (ohm-km)

0.1711 0.1648 0.1589 0.1530 0.1487 0.1440 0.1398 0.1364 0.1336 0.1311 0.1290 0.1279 0.1237

19847 18509 17258 16006 14814 13758 12915 12227 11651 11150 10747 9893 9096

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 25 kV Triplexed conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750

CONDUCTOR CROSS DIAMETER SECTION (mm) (sq inches)

299 336 376 423 475 520 570 616 659 700 736 813 908

0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

JACKET DIAMETER (mm)

DIAMETER OVER TRANDED PHASE (mm)

260 260 260 260 260 260 260 260 260 260 260 260 260

853 890 930 977 1030 1084 1134 1180 1223 1264 1300 1385 1480

80 80 80 80 80 80 80 80 80 80 80 110 110

1095 1132 1173 1219 1295 1349 1399 1445 1488 1529 1565 1712 1807

2361 2440 2527 2628 2790 2907 3015 3114 3206 3295 3372 3690 3894

Notes:

38

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

COPPER ALUMINUM

COPPER

ALUMINUM

2143 2416 2748 3160 3743 4216 4781 5338 5890 6437 6975 8401 10009

0.128 0.101 0.0803 0.0637 0.0505 0.0427 0.0356 0.0305 0.0267 0.0237 0.0214 0.0178 0.0142

0.209 0.165 0.131 0.104 0.0825 0.0698 0.0582 0.0499 0.0436 0.0388 0.0349 0.0291 0.0233

1598 1729 1882 2068 2366 2589 2828 3060 3286 3508 3721 4495 5127

INDUCTIVE REACTANCE² (ohm/km)

CAPACITIVE REACTANCE² (ohm-km)

0.2753 0.2652 0.2557 0.2462 0.2393 0.2318 0.2251 0.2196 0.2149 0.2109 0.2077 0.2059 0.1990

12333 11501 10724 9946 9205 8549 8025 7598 7240 6929 6678 6147 5652

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.


MV-90 35 kV Triplexed conductors, 90°C (International Unit System) 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

CONDUCTOR DIAMETER (mm)

1/0 2/0 3/0 4/0 250 300 350 400 450 500

8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69

Notes:

CROSS SECTION (mm²)

53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4

INSULATION THICKNESS (mm)

8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76

INSULATION DIAMETER (mm)

26.97 27.99 29.18 30.51 31.89 33.16 34.33 35.42 36.46 37.37

JACKET THICKNESS (mm)

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

JACKET DIAMETER (mm)

33.70 34.72 35.91 37.24 38.62 39.89 41.06 42.15 43.19 44.10

DIAMETER OVER TRANDED PHASE (mm)

72.63 74.83 77.39 80.26 83.23 85.97 88.49 90.84 93.08 95.04

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

COPPER

ALUMINUM

COPPER

ALUMINUM

4379 4896 5536 6320 7051 7916 8767 9609 10443 11261

3356 3607 3910 4271 4629 5010 5377 5734 6085 6418

0.332 0.263 0.209 0.166 0.140 0.117 0.100 0.0876 0.0779 0.0701

0.543 0.430 0.341 0.271 0.229 0.191 0.164 0.143 0.127 0.115

INDUCTIVE REACTANCE² (ohm/km)

CAPACITIVE REACTANCE² (ohm-km)

0.1767 0.1705 0.1642 0.1581 0.1531 0.1486 0.1449 0.1418 0.1391 0.1369

22170 20773 19366 18016 16810 15841 15047 14378 13794 13323

INDUCTIVE REACTANCE² (ohm/km)

CAPACITIVE REACTANCE² (ohm-km)

0.2844 0.2744 0.2642 0.2544 0.2463 0.2391 0.2332 0.2282 0.2238 0.2203

13776 12908 12034 11195 10446 9844 9350 8934 8572 8279

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm²/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 35 kV Triplexed conductors, 90°C 100% Insulation Level Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-97-682 Standard for Utility Shielded Power Cables Rated 5000 To 46000 Volts. SIZE AWG / kcmil

1/0 2/0 3/0 4/0 250 300 350 400 450 500 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (sq inches)

336 376 423 475 520 570 616 659 700 736

0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393

INSULATION THICKNESS (mm)

INSULATION DIAMETER (mm)

JACKET THICKNESS (mm)

345 345 345 345 345 345 345 345 345 345

1062 1102 1149 1201 1256 1306 1352 1394 1435 1471

80 80 80 80 80 80 80 80 80 80

JACKET DIAMETER (mm)

1327 1367 1414 1466 1521 1571 1617 1660 1700 1736

DIAMETER OVER TRANDED PHASE (mm)

2859 2946 3047 3160 3277 3385 3484 3576 3665 3742

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

COPPER ALUMINUM

COPPER

ALUMINUM

2943 3290 3720 4248 4738 5320 5892 6457 7018 7568

0.101 0.0803 0.0637 0.0505 0.0427 0.0356 0.0305 0.0267 0.0237 0.0214

0.165 0.131 0.104 0.0825 0.0698 0.0582 0.0499 0.0436 0.0388 0.0349

2256 2424 2628 2870 3111 3367 3614 3854 4089 4313

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

39


MV-90 5 - 35 kV Single Conductors URD Type (Underground Residential Distribution)

Description Copper or aluminum stranded, thermo set insulated.

Contruction Conductor Soft Copper or 1350-H19 aluminum, compact stranded. Conductor Shield Cross linked polyethylene semiconductor. Insulation Cross linked polyethylene XLPE. Insulation shield Cross linked polyethylene removable semiconductor. Insulation and shields are applied by true triple extrusion process. Metallic shield Copper tape helically and overlapped applied over insulation shield, 2.5 mils (0.0635mm) thickness. Jacket Flame retardant polyvinyl chloride PVC. Options EPR or XLPE-TR (Tree retardant XLPE) Copper wires metallic shield. Polyethylene Jacket, PVC SR (Sunlight Resistant) Jacket, PVC Tray Cable type jacket. Moisture barrier against longitudinally migration.

Characteristics Operating Temperature Normal continuous operation 90째C for wet or dry locations (105째C optional) 40


Overload 130°C Short circuit 250°C Rated Voltage 5, 8, 15, 25 and 35 kV. Insulation Level 100% (133% and 173% optional).

Applications Distribution of electric energy at Medium Voltage, installed at air, underground ducts, raceways, direct buried or tray cables.

Standards CENTELSA’s 5-35 kV three conductors are manufactured in accordance with the following standards: ASTM B496, NTC-ICONTEC 2187. Compact round concentric lay stranded Copper Conductors. ASTM B400, NTC-ICONTEC 4334. Compact round concentric lay stranded Aluminum 1350 Conductors. UL 1072. Medium Voltage Power Cables MV90. ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5 – 46 kV AEIC CS8. Specification for Extruded Dielectric, Shielded Power Cables Rated 5 through 46 kV.

Certifications CENTELSA’s 5-35 kV Single conductors are certified by: UL 1072. File E167359. ICONTEC (Colombia). NTC 2186 standard. CIDET (Colombia). Cert. 00412. 15 kV Medium Voltage Copper, XLPE CIDET (Colombia). Cert. 00413. 35 kV Medium Voltage Copper, XLPE. CIDET (Colombia). Cert. 00414. 15 kV Medium Voltage Copper, EPR CIDET (Colombia). Cert. 00415. 35 kV Medium Voltage Copper, EPR.

41


Note: Configurations and sizes herein not specified are available upon request.

MV-90 5 kV Single Copper conductor, 90°C (International Unit System) 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (mm²) (mm) (mm)

3.40 4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

8.4 13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29

8.86 9.75 10.87 12.27 13.05 13.99 15.01 16.20 17.53 18.91 20.18 21.35 22.44 23.48 24.39 26.57 28.98 32.84 Notes:

42

CONCENTRIC NEUTRAL

JACKET STRANDS STRANDS CROSS DIAMETER THICKNESS No. DIAMETER SECTION No. (mm) (mm) (mm²)

6 6 6 9 11 14 18 22 28 21 25 29 33 37 26 31 25 32

1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.63 1.63 1.63 1.63 1.63 2.05 2.05 2.59 2.59

7.9 7.9 7.9 11.8 14.4 18.3 23.6 28.8 36.7 43.8 52.1 60.4 68.8 77.1 86.0 102.5 131.5 168.3

13.22 14.11 15.23 16.63 17.41 18.35 19.37 20.56 21.89 23.95 25.22 26.39 27.48 28.52 30.27 33.03 36.52 40.38

1.14 1.52 1.52 1.52 1.52 1.52 1.52 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

15.74 17.42 18.54 19.94 20.72 21.66 22.68 24.89 26.22 28.28 29.55 30.72 31.81 32.85 34.61 37.37 40.85 44.71

311 402 494 671 788 943 1137 1424 1727 2010 2344 2677 3007 3337 3677 4380 5404 6984

2.10 1.32 0.831 0.523 0.415 0.329 0.261 0.207 0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

0.4010 0.3835 0.3660 0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

15795 13740 11824 10081 9319 8544 7838 7150 6512 5961 5531 5187 4902 4659 4465 4060 3691 3221


MV-90 5 kV Single Copper conductor, 90°C 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (sq inches) (mm²) (mm) (mm)

134 169 213 268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0130 0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

349 384 428 483 514 551 591 638 690 744 794 841 883 924 960 1046 1141 1293

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

6 6 6 9 11 14 18 22 28 21 25 29 33 37 26 31 25 32

51 51 51 51 51 51 51 51 51 64 64 64 64 64 81 81 102 102

0.0122 0.0122 0.0122 0.0183 0.0223 0.0284 0.0365 0.0446 0.0568 0.0678 0.0808 0.0937 0.107 0.120 0.133 0.159 0.204 0.261

521 556 600 655 686 723 763 810 862 943 993 1039 1082 1123 1192 1301 1438 1590

45 60 60 60 60 60 60 80 80 80 80 80 80 80 80 80 80 80

620 686 730 785 816 853 893 980 1032 1113 1163 1209 1252 1293 1362 1471 1608 1760

209 270 332 451 530 634 764 957 1160 1351 1575 1799 2021 2243 2471 2944 3632 4693

0.641 0.403 0.253 0.159 0.126 0.100 0.0795 0.0630 0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

43

0.6454 0.6172 0.5890 0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

9815 8538 7347 6264 5791 5309 4870 4443 4046 3704 3437 3223 3046 2895 2774 2523 2293 2002


MV-90 8 kV Single Copper conductor, 90°C (International Unit System) 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92

11.05 12.17 13.57 14.35 15.29 16.31 17.50 18.83 20.21 21.48 22.65 23.74 24.78 25.69 27.87 30.28 34.14 Notes:

CONCENTRIC NEUTRAL STRANDS STRANDS CROSS No. DIAMETER SECTION (mm) (mm²)

6 6 9 11 14 18 22 28 21 25 29 33 37 26 31 25 32

1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.63 1.63 1.63 1.63 1.63 2.05 2.05 2.59 2.59

7.9 7.9 11.8 14.4 18.3 23.6 28.8 36.7 43.8 52.1 60.4 68.8 77.1 86.0 102.5 131.5 168.3

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C ¹ No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

15.41 16.53 17.93 18.71 19.65 20.67 21.86 23.19 25.25 26.52 27.69 28.78 29.82 32.15 34.33 37.82 41.68

1.52 1.52 1.52 1.52 1.52 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

18.72 19.84 21.24 22.02 22.96 25.00 26.19 27.52 29.58 30.85 32.02 33.11 34.15 36.49 38.67 42.15 46.01

435 530 709 828 984 1237 1473 1778 2063 2400 2735 3068 3399 3776 4450 5478 7065

1.32 0.831 0.523 0.415 0.329 0.261 0.207 0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

0.3835 0.3660 0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

16338 14169 12171 11291 10388 9562 8752 7997 7341 6827 6414 6071 5778 5543 5052 4601 4027

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 8 kV Single Copper conductor, 90°C 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

169 213 268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115

435 479 534 565 602 642 689 741 796 846 892 935 976 1011 1097 1192 1344 Notes:

44

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

6 6 9 11 14 18 22 28 21 25 29 33 37 26 31 25 32

51 51 51 51 51 51 51 51 64 64 64 64 64 81 81 102 102

0.0122 0.0122 0.0183 0.0223 0.0284 0.0365 0.0446 0.0568 0.0678 0.0808 0.0937 0.107 0.120 0.133 0.159 0.204 0.261

607 651 706 737 774 814 861 913 994 1044 1090 1133 1174 1266 1352 1489 1641

60 60 60 60 60 80 80 80 80 80 80 80 80 80 80 80 80

737 781 836 867 904 984 1031 1084 1165 1215 1261 1304 1344 1436 1522 1659 1811

292 356 477 556 661 831 990 1195 1387 1613 1838 2062 2284 2538 2990 3681 4748

0.403 0.253 0.159 0.126 0.100 0.0795 0.0630 0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

0.6172 0.5890 0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

10152 8804 7563 7016 6455 5942 5438 4969 4562 4242 3985 3773 3590 3444 3139 2859 2502


MV-90 15 kV Single Copper conductor, 90°C (International Unit System) 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45

16.63 17.41 18.35 19.37 20.56 21.89 23.27 24.54 25.71 26.80 27.84 28.75 30.93 33.34 37.20

CONCENTRIC NEUTRAL STRANDS STRANDS CROSS No. DIAMETER SECTION (mm) (mm²)

9 11 14 18 22 28 21 25 29 33 37 26 31 25 32

1.29 1.29 1.29 1.29 1.29 1.29 1.63 1.63 1.63 1.63 1.63 2.05 2.05 2.59 2.59

11.8 14.4 18.3 23.6 28.8 36.7 43.8 52.1 60.4 68.8 77.1 86.0 102.5 131.5 168.3

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C ¹ No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

20.99 21.77 22.71 23.73 24.92 26.25 28.31 29.58 31.33 32.42 33.46 35.21 37.39 40.88 44.74

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79

25.32 26.10 27.04 28.06 29.25 30.58 32.64 33.91 35.66 36.75 37.79 39.55 41.73 45.21 50.63

866 990 1152 1356 1597 1907 2199 2542 2917 3256 3593 3940 4622 5661 7443

0.523 0.415 0.329 0.261 0.207 0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

16393 15303 14175 13131 12097 11123 10268 9592 9044 8588 8195 7879 7214 6600 5809

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 15 kV Single Copper conductor, 90°C 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

175 175 175 175 175 175 175 175 175 175 175 175 175 175 175

655 685 722 763 809 862 916 966 1012 1055 1096 1132 1218 1313 1465

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

9 11 14 18 22 28 21 25 29 33 37 26 31 25 32

51 51 51 51 51 51 64 64 64 64 64 81 81 102 102

0.0183 0.0223 0.0284 0.0365 0.0446 0.0568 0.0678 0.0808 0.0937 0.107 0.120 0.133 0.159 0.204 0.261

826 857 894 934 981 1034 1114 1164 1233 1276 1317 1386 1472 1609 1761

80 80 80 80 80 80 80 80 80 80 80 80 80 80 110

997 1028 1065 1105 1152 1204 1285 1335 1404 1447 1488 1557 1643 1780 1993

582 665 774 911 1073 1282 1478 1708 1960 2188 2415 2648 3106 3805 5002

0.159 0.126 0.100 0.0795 0.0630 0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

45

0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

10186 9509 8808 8160 7517 6912 6381 5960 5620 5337 5092 4896 4483 4101 3610


MV-90 25 kV Single Copper conductor, 90°C (International Unit System) 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60

21.67 22.61 23.63 24.82 26.15 27.53 28.80 29.97 31.06 32.10 33.01 35.19 37.60 41.46 Notes:

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (mm²) (kg/km)

11 14 18 22 28 21 25 29 33 37 26 31 25 32

1.29 1.29 1.29 1.29 1.29 1.63 1.63 1.63 1.63 1.63 2.05 2.05 2.59 2.59

14.4 18.3 23.6 28.8 36.7 43.8 52.1 60.4 68.8 77.1 86.0 102.5 131.5 168.3

26.03 26.97 27.99 29.18 31.09 33.15 34.42 35.59 36.68 37.72 39.47 41.65 45.14 49.86

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79 2.79 2.79

30.36 31.30 32.32 33.51 35.42 37.48 38.75 39.92 41.01 42.05 43.81 47.55 51.03 55.75

1165 1334 1543 1791 2146 2448 2800 3148 3493 3837 4189 5052 6118 7842

0.415 0.329 0.261 0.207 0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

19847 18509 17258 16006 14814 13758 12915 12227 11651 11150 10747 9893 9096 8060

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 25 kV Single Copper conductor, 90°C 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

260 260 260 260 260 260 260 260 260 260 260 260 260 260

853 890 930 977 1030 1084 1134 1180 1223 1264 1300 1385 1480 1632 Notes:

46

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

11 14 18 22 28 21 25 29 33 37 26 31 25 32

51 51 51 51 51 64 64 64 64 64 81 81 102 102

0.0223 0.0284 0.0365 0.0446 0.0568 0.0678 0.0808 0.0937 0.107 0.120 0.133 0.159 0.204 0.261

1025 1062 1102 1149 1224 1305 1355 1401 1444 1485 1554 1640 1777 1963

80 80 80 80 80 80 80 80 80 80 80 110 110 110

1195 1232 1273 1319 1395 1476 1526 1572 1615 1656 1725 1872 2009 2195

783 896 1037 1204 1442 1645 1882 2116 2348 2579 2815 3395 4111 5270

0.126 0.100 0.0795 0.0630 0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

12333 11501 10724 9946 9205 8549 8025 7598 7240 6929 6678 6147 5652 5008


MV-90 35 kV Single Copper conductor, 90°C (International Unit System) 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76

26.97 27.99 29.18 30.51 31.89 33.16 34.33 35.42 36.46 37.37 39.55 41.96 45.82

CONCENTRIC NEUTRAL STRANDS STRANDS CROSS No. DIAMETER SECTION (mm) (mm²)

14 18 22 28 21 25 29 33 37 26 31 25 32

1.29 1.29 1.29 1.29 1.63 1.63 1.63 1.63 1.63 2.05 2.05 2.59 2.59

18.3 23.6 28.8 36.7 43.8 52.1 60.4 68.8 77.1 86.0 102.5 131.5 168.3

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

31.91 32.93 34.12 35.45 37.51 38.78 39.95 41.04 42.08 43.83 46.87 50.36 54.22

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79 2.79 2.79

36.24 37.26 38.45 39.78 41.84 43.11 44.28 45.37 46.41 48.17 52.77 56.25 60.11

1583 1800 2057 2386 2696 3056 3412 3764 4114 4472 5443 6528 8200

0.329 0.261 0.207 0.164 0.139 0.116 0.0992 0.0868 0.0771 0.0694 0.0578 0.0463 0.0347

0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

22170 20773 19366 18016 16810 15841 15047 14378 13794 13323 12318 11374 10136

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 35 kV Single Copper conductor, 90°C 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

345 345 345 345 345 345 345 345 345 345 345 345 345

1062 1102 1149 1201 1256 1306 1352 1394 1435 1471 1557 1652 1804

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

14 18 22 28 21 25 29 33 37 26 31 25 32

51 51 51 51 64 64 64 64 64 81 81 102 102

0.0284 0.0365 0.0446 0.0568 0.0678 0.0808 0.0937 0.107 0.120 0.133 0.159 0.204 0.261

1256 1297 1343 1396 1477 1527 1573 1616 1657 1726 1845 1983 2134

80 80 80 80 80 80 80 80 80 80 110 110 110

1427 1467 1514 1566 1647 1697 1743 1786 1827 1896 2078 2215 2367

1064 1210 1382 1603 1812 2054 2293 2530 2765 3006 3658 4387 5511

0.100 0.0795 0.0630 0.0500 0.0423 0.0353 0.0302 0.0264 0.0235 0.0212 0.0176 0.0141 0.0106

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

47

0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

13776 12908 12034 11195 10446 9844 9350 8934 8572 8279 7654 7068 6298


MV-90 5 kV Single Aluminum conductor, 90°C (International Unit System) 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

3.40 4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

8.4 13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29

8.86 9.75 10.87 12.27 13.05 13.99 15.01 16.20 17.53 18.91 20.18 21.35 22.44 23.48 24.39 26.57 28.98 32.84 Notes:

CONCENTRIC NEUTRAL STRANDS STRANDS CROSS No. DIAMETER SECTION (mm) (mm²)

6 6 6 6 7 9 11 14 17 20 24 28 32 36 25 30 24 31

1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.63 1.63 2.05 2.05

7.9 7.9 7.9 7.9 9.2 11.8 14.4 18.3 22.3 26.2 31.4 36.7 41.9 47.1 52.1 62.5 79.4 102.5

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

13.22 14.11 15.23 16.63 17.41 18.35 19.37 20.56 21.89 23.27 24.54 25.71 26.80 27.84 29.43 32.19 35.44 39.30

1.14 1.52 1.52 1.52 1.52 1.52 1.52 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

15.74 17.42 18.54 19.94 20.72 21.66 22.68 24.89 26.22 27.60 28.87 30.04 31.13 32.17 33.76 36.52 39.78 43.64

258 318 361 423 472 545 627 792 918 1042 1188 1333 1475 1616 1759 2086 2516 3171

3.43 2.16 1.36 0.854 0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

0.4010 0.3835 0.3660 0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

15795 13740 11824 10081 9319 8544 7838 7150 6512 5961 5531 5187 4902 4659 4465 4060 3691 3221

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 5 kV Single Aluminum conductor, 90°C 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

134 169 213 268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0130 0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

349 384 428 483 514 551 591 638 690 744 794 841 883 924 960 1046 1141 1293 Notes:

48

CONCENTRIC NEUTRAL STRANDS No.

6 6 6 6 7 9 11 14 17 20 24 28 32 36 25 30 24 31

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

51 51 51 51 51 51 51 51 51 51 51 51 51 51 64 64 81 81

0.0122 0.0122 0.0122 0.0122 0.0142 0.0183 0.0223 0.0284 0.0345 0.0406 0.0487 0.0568 0.0649 0.0730 0.0808 0.0969 0.123 0.159

521 556 600 655 686 723 763 810 862 916 966 1012 1055 1096 1159 1267 1395 1547

45 60 60 60 60 60 60 80 80 80 80 80 80 80 80 80 80 80

620 686 730 785 816 853 893 980 1032 1087 1137 1183 1226 1267 1329 1438 1566 1718

173 213 243 284 317 366 422 532 617 700 799 895 991 1086 1182 1402 1691 2131

1.05 0.658 0.414 0.260 0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

0.6454 0.6172 0.5890 0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

9815 8538 7347 6264 5791 5309 4870 4443 4046 3704 3437 3223 3046 2895 2774 2523 2293 2002


MV-90 8 kV Single Aluminum conductor, 90°C (International Unit System) 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92

11.05 12.17 13.57 14.35 15.29 16.31 17.50 18.83 20.21 21.48 22.65 23.74 24.78 25.69 27.87 30.28 34.14

CONCENTRIC NEUTRAL STRANDS STRANDS CROSS No. DIAMETER SECTION (mm) (mm²)

6 6 6 7 9 11 14 17 20 24 28 32 36 25 30 24 31

1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.63 1.63 2.05 2.05

7.9 7.9 7.9 9.2 11.8 14.4 18.3 22.3 26.2 31.4 36.7 41.9 47.1 52.1 62.5 79.4 102.5

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

15.41 16.53 17.93 18.71 19.65 20.67 21.86 23.19 24.57 25.84 27.01 28.10 29.14 31.31 33.49 36.74 40.60

1.52 1.52 1.52 1.52 1.52 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

18.72 19.84 21.24 22.02 22.96 25.00 26.19 27.52 28.90 30.17 31.34 32.43 33.47 35.64 37.82 41.08 44.94

351 396 461 512 586 727 840 969 1096 1244 1391 1535 1678 1858 2155 2590 3252

2.16 1.36 0.854 0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

0.3835 0.3660 0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

16338 14169 12171 11291 10388 9562 8752 7997 7341 6827 6414 6071 5778 5543 5052 4601 4027

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 8 kV Single Aluminum conductor, 90°C 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

6 4 2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

169 213 268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115

435 479 534 565 602 642 689 741 796 846 892 935 976 1011 1097 1192 1344

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

6 6 6 7 9 11 14 17 20 24 28 32 36 25 30 24 31

51 51 51 51 51 51 51 51 51 51 51 51 51 64 64 81 81

0.0122 0.0122 0.0122 0.0142 0.0183 0.0223 0.0284 0.0345 0.0406 0.0487 0.0568 0.0649 0.0730 0.0808 0.0969 0.123 0.159

607 651 706 737 774 814 861 913 967 1017 1063 1106 1147 1233 1318 1447 1599

60 60 60 60 60 80 80 80 80 80 80 80 80 80 80 80 80

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

737 781 836 867 904 984 1031 1084 1138 1188 1234 1277 1318 1403 1489 1617 1769

236 266 310 344 394 489 565 651 736 836 935 1032 1128 1249 1449 1741 2186

0.658 0.414 0.260 0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

49

0.6172 0.5890 0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

10152 8804 7563 7016 6455 5942 5438 4969 4562 4242 3985 3773 3590 3444 3139 2859 2502


MV-90 15 kV Single Aluminum conductor, 90°C (International Unit System) 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45

16.63 17.41 18.35 19.37 20.56 21.89 23.27 24.54 25.71 26.80 27.84 28.75 30.93 33.34 37.20 Notes:

CONCENTRIC NEUTRAL

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (mm²) (kg/km)

6 7 9 11 14 17 20 24 28 32 36 25 30 24 31

1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.63 1.63 2.05 2.05

7.9 9.2 11.8 14.4 18.3 22.3 26.2 31.4 36.7 41.9 47.1 52.1 62.5 79.4 102.5

20.99 21.77 22.71 23.73 24.92 26.25 27.63 28.90 30.65 31.74 32.78 34.37 36.55 39.80 43.66

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79

25.32 26.10 27.04 28.06 29.25 30.58 31.96 33.23 34.98 36.07 37.11 38.70 40.88 44.14 49.56

618 674 755 846 964 1098 1232 1386 1573 1723 1872 2021 2328 2774 3626

0.854 0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

16393 15303 14175 13131 12097 11123 10268 9592 9044 8588 8195 7879 7214 6600 5809

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 15 kV Single Aluminum conductor, 90°C 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

268 299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

175 175 175 175 175 175 175 175 175 175 175 175 175 175 175

655 685 722 763 809 862 916 966 1012 1055 1096 1132 1218 1313 1465 Notes:

50

CONCENTRIC NEUTRAL STRANDS No.

6 7 9 11 14 17 20 24 28 32 36 25 30 24 31

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

51 51 51 51 51 51 51 51 51 51 51 64 64 81 81

0.0122 0.0142 0.0183 0.0223 0.0284 0.0345 0.0406 0.0487 0.0568 0.0649 0.0730 0.0808 0.0969 0.123 0.159

826 857 894 934 981 1034 1088 1138 1207 1250 1291 1353 1439 1567 1719

80 80 80 80 80 80 80 80 80 80 80 80 80 80 110

997 1028 1065 1105 1152 1204 1258 1308 1377 1420 1461 1524 1609 1738 1951

415 453 507 568 648 738 828 931 1057 1158 1258 1358 1565 1864 2437

0.260 0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

10186 9509 8808 8160 7517 6912 6381 5960 5620 5337 5092 4896 4483 4101 3610


MV-90 25 kV Single Aluminum conductor, 90°C (International Unit System) 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

CONCENTRIC NEUTRAL INSULATION INSULATION JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE THICKNESS DIAMETER STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ (mm) (mm) No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (mm²) (kg/km)

6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60

21.67 22.61 23.63 24.82 26.15 27.53 28.80 29.97 31.06 32.10 33.01 35.19 37.60 41.46

7 9 11 14 17 20 24 28 32 36 25 30 24 31

1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.63 1.63 2.05 2.05

9.2 11.8 14.4 18.3 22.3 26.2 31.4 36.7 41.9 47.1 52.1 62.5 79.4 102.5

26.03 26.97 27.99 29.18 31.09 32.47 33.74 34.91 36.00 37.04 38.63 40.81 44.06 48.78

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79 2.79 2.79

30.36 31.30 32.32 33.51 35.42 36.80 38.07 39.24 40.33 41.37 42.96 46.71 49.96 54.68

849 936 1033 1159 1337 1481 1644 1804 1961 2116 2271 2755 3227 4025

0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

19847 18509 17258 16006 14814 13758 12915 12227 11651 11150 10747 9893 9096 8060

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 25 kV Single Aluminum conductor, 90°C 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

299 336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

260 260 260 260 260 260 260 260 260 260 260 260 260 260

853 890 930 977 1030 1084 1134 1180 1223 1264 1300 1385 1480 1632

CONCENTRIC NEUTRAL STRANDS No.

7 9 11 14 17 20 24 28 32 36 25 30 24 31

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

51 51 51 51 51 51 51 51 51 51 64 64 81 81

0.0142 0.0183 0.0223 0.0284 0.0345 0.0406 0.0487 0.0568 0.0649 0.0730 0.0808 0.0969 0.123 0.159

1025 1062 1102 1149 1224 1278 1328 1374 1417 1458 1521 1607 1735 1921

80 80 80 80 80 80 80 80 80 80 80 110 110 110

1195 1232 1273 1319 1395 1449 1499 1545 1588 1629 1691 1839 1967 2153

571 629 694 779 899 995 1105 1212 1318 1422 1526 1851 2168 2705

0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

51

0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

12333 11501 10724 9946 9205 8549 8025 7598 7240 6929 6678 6147 5652 5008


MV-90 35 kV Single Aluminum conductor, 90°C (International Unit System) 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

8.53 9.55 10.74 12.07 13.21 14.48 15.65 16.74 17.78 18.69 20.65 23.06 26.92

53.5 67.4 85.0 107.2 126.7 152.0 177.3 202.7 228.0 253.4 304.0 380.0 506.7

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76 8.76

26.97 27.99 29.18 30.51 31.89 33.16 34.33 35.42 36.46 37.37 39.55 41.96 45.82 Notes:

CONCENTRIC NEUTRAL STRANDS STRANDS CROSS No. DIAMETER SECTION (mm) (mm²)

9 11 14 17 20 24 28 32 36 25 30 24 31

1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.63 1.63 2.05 2.05

11.8 14.4 18.3 22.3 26.2 31.4 36.7 41.9 47.1 52.1 62.5 79.4 102.5

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

31.91 32.93 34.12 35.45 36.83 38.10 39.27 40.36 41.40 42.99 46.03 49.28 53.14

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.79 2.79 2.79

36.24 37.26 38.45 39.78 41.16 42.43 43.60 44.69 45.73 47.32 51.93 55.18 59.04

1185 1290 1424 1577 1729 1900 2067 2231 2393 2554 3146 3636 4384

0.537 0.426 0.338 0.268 0.227 0.189 0.162 0.142 0.126 0.113 0.0945 0.0756 0.0567

0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817 0.2766 0.2721 0.2683 0.2604 0.2521 0.2404

22170 20773 19366 18016 16810 15841 15047 14378 13794 13323 12318 11374 10136

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 35 kV Single Aluminum conductor, 90°C 100% Insulation Level, 33% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

1/0 2/0 3/0 4/0 250 300 350 400 450 500 600 750 1000

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

336 376 423 475 520 570 616 659 700 736 813 908 1060

0.0829 0.105 0.132 0.166 0.196 0.236 0.275 0.314 0.353 0.393 0.471 0.589 0.785

345 345 345 345 345 345 345 345 345 345 345 345 345

1062 1102 1149 1201 1256 1306 1352 1394 1435 1471 1557 1652 1804 Notes:

52

CONCENTRIC NEUTRAL STRANDS No.

9 11 14 17 20 24 28 32 36 25 30 24 31

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

51 51 51 51 51 51 51 51 51 64 64 81 81

0.0183 0.0223 0.0284 0.0345 0.0406 0.0487 0.0568 0.0649 0.0730 0.0808 0.0969 0.123 0.159

1256 1297 1343 1396 1450 1500 1546 1589 1630 1692 1812 1940 2092

80 80 80 80 80 80 80 80 80 80 110 110 110

1427 1467 1514 1566 1621 1671 1717 1760 1801 1863 2044 2172 2324

797 867 957 1060 1162 1277 1389 1500 1608 1716 2114 2444 2946

0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494 0.0432 0.0384 0.0346 0.0288 0.0230 0.0173

0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533 0.4452 0.4378 0.4318 0.4191 0.4057 0.3869

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

13776 12908 12034 11195 10446 9844 9350 8934 8572 8279 7654 7068 6298


MV-90 5 kV Single Copper conductor, 90°C (International Unit System) 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

3.40 4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07

8.4 13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29

8.86 9.75 10.87 12.27 13.05 13.99 15.01 16.20 17.53

CONCENTRIC NEUTRAL STRANDS STRANDS CROSS No. DIAMETER SECTION (mm) (mm²)

6 10 16 26 20 25 32 25 32

1.29 1.29 1.29 1.29 1.63 1.63 1.63 2.05 2.05

7.9 13.1 20.9 34.0 41.7 52.1 66.7 82.7 105.8

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

13.22 14.11 15.23 16.63 18.09 19.03 20.05 22.08 23.41

1.14 1.52 1.52 1.52 1.52 1.52 1.52 2.03 2.03

15.74 17.42 18.54 19.94 21.40 22.34 23.36 26.42 27.75

311 450 615 876 1044 1258 1539 1935 2378

2.10 1.32 0.831 0.523 0.415 0.329 0.261 0.207 0.164

0.4010 0.3835 0.3660 0.3487 0.3372 0.3284 0.3199 0.3111 0.3023

15795 13740 11824 10081 9319 8544 7838 7150 6512

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 5 kV Single Copper conductor, 90°C 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649

Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

134 169 213 268 299 336 376 423 475

0.0130 0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166

90 90 90 90 90 90 90 90 90

349 384 428 483 514 551 591 638 690

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

6 10 16 26 20 25 32 25 32

51 51 51 51 64 64 64 81 81

0.0122 0.0203 0.0325 0.0528 0.0646 0.0808 0.103 0.128 0.164

521 556 600 655 712 749 789 869 922

45 60 60 60 60 60 60 80 80

620 686 730 785 843 880 920 1040 1092

209 302 413 589 702 846 1034 1300 1598

0.641 0.403 0.253 0.159 0.126 0.100 0.0795 0.0630 0.0500

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

53

0.6454 0.6172 0.5890 0.5611 0.5427 0.5285 0.5148 0.5006 0.4864

9815 8538 7347 6264 5791 5309 4870 4443 4046


MV-90 8 kV Single Copper conductor, 90°C (International Unit System) 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

6 4 2 1 1/0 2/0 3/0 4/0

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

4.29 5.41 6.81 7.59 8.53 9.55 10.74 12.07

13.3 21.2 33.6 42.4 53.5 67.4 85.0 107.2

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92

11.05 12.17 13.57 14.35 15.29 16.31 17.50 18.83 Notes:

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (mm²) (kg/km)

10 16 26 20 25 32 25 32

1.29 1.29 1.29 1.63 1.63 1.63 2.05 2.05

13.1 20.9 34.0 41.7 52.1 66.7 82.7 105.8

15.41 16.53 17.93 19.39 20.33 21.35 23.38 24.71

1.52 1.52 1.52 1.52 1.52 2.03 2.03 2.03

18.72 19.84 21.24 22.70 23.64 25.68 27.72 29.05

483 650 914 1084 1300 1640 1983 2429

1.32 0.831 0.523 0.415 0.329 0.261 0.207 0.164

0.3835 0.3660 0.3487 0.3372 0.3284 0.3199 0.3111 0.3023

16338 14169 12171 11291 10388 9562 8752 7997

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 8 kV Single Copper conductor, 90°C 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

6 4 2 1 1/0 2/0 3/0 4/0

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

169 213 268 299 336 376 423 475

0.0206 0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166

15 15 15 15 15 15 15 15

435 479 534 565 602 642 689 741 Notes:

54

CONCENTRIC NEUTRAL STRANDS No.

10 16 26 20 25 32 25 32

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

51 51 51 64 64 64 81 81

0.0203 0.0325 0.0528 0.0646 0.0808 0.103 0.128 0.164

607 651 706 763 800 840 921 973

60 60 60 60 60 80 80 80

737 781 836 894 931 1011 1091 1144

325 437 614 728 874 1102 1333 1632

0.403 0.253 0.159 0.126 0.100 0.0795 0.0630 0.0500

0.6172 0.5890 0.5611 0.5427 0.5285 0.5148 0.5006 0.4864

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

10152 8804 7563 7016 6455 5942 5438 4969


MV-90 15 kV Single Copper conductor, 90°C (International Unit System) 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

6.81 7.59 8.53 9.55 10.74 12.07

33.6 42.4 53.5 67.4 85.0 107.2

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

4.45 4.45 4.45 4.45 4.45 4.45

16.63 17.41 18.35 19.37 20.56 21.89

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (mm²) (kg/km)

26 20 25 32 25 32

1.29 1.63 1.63 1.63 2.05 2.05

34.0 41.7 52.1 66.7 82.7 105.8

20.99 22.45 23.39 24.41 26.44 27.77

2.03 2.03 2.03 2.03 2.03 2.03

25.32 26.78 27.72 28.74 30.78 32.11

1071 1247 1470 1759 2107 2558

0.523 0.415 0.329 0.261 0.207 0.164

0.3487 0.3372 0.3284 0.3199 0.3111 0.3023

16393 15303 14175 13131 12097 11123

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 15 kV Single Copper conductor, 90°C 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

268 299 336 376 423 475

0.0521 0.0657 0.0829 0.105 0.132 0.166

175 175 175 175 175 175

655 685 722 763 809 862

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

26 20 25 32 25 32

51 64 64 64 81 81

0.0528 0.0646 0.0808 0.103 0.128 0.164

826 884 921 961 1041 1093

80 80 80 80 80 80

997 1054 1091 1131 1212 1264

719 838 988 1182 1416 1719

0.159 0.126 0.100 0.0795 0.0630 0.0500

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

55

0.5611 0.5427 0.5285 0.5148 0.5006 0.4864

10186 9509 8808 8160 7517 6912


MV-90 25 kV Single Copper conductor, 90°C (International Unit System) 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

7.59 8.53 9.55 10.74 12.07

42.4 53.5 67.4 85.0 107.2

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

6.60 6.60 6.60 6.60 6.60

21.67 22.61 23.63 24.82 26.15 Notes:

CONCENTRIC NEUTRAL STRANDS STRANDS CROSS No. DIAMETER SECTION (mm) (mm²)

20 25 32 25 32

1.63 1.63 1.63 2.05 2.05

41.7 52.1 66.7 82.7 105.8

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

26.71 27.65 28.67 30.70 32.61

2.03 2.03 2.03 2.03 2.03

31.04 31.98 33.00 35.04 36.95

1423 1651 1946 2302 2797

0.415 0.329 0.261 0.207 0.164

0.3372 0.3284 0.3199 0.3111 0.3023

19847 18509 17258 16006 14814

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 25 kV Single Copper conductor, 90°C 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

299 336 376 423 475

0.0657 0.0829 0.105 0.132 0.166

260 260 260 260 260

853 890 930 977 1030 Notes:

56

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

20 25 32 25 32

64 64 64 81 81

0.0646 0.0808 0.103 0.128 0.164

1051 1089 1129 1209 1284

80 80 80 80 80

1222 1259 1299 1379 1455

956 1109 1308 1547 1880

0.126 0.100 0.0795 0.0630 0.0500

0.5427 0.5285 0.5148 0.5006 0.4864

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

12333 11501 10724 9946 9205


MV-90 35 kV Single Copper conductor, 90°C (International Unit System) 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

1/0 2/0 3/0 4/0 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

8.53 9.55 10.74 12.07

53.5 67.4 85.0 107.2

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

8.76 8.76 8.76 8.76

26.97 27.99 29.18 30.51

CONCENTRIC NEUTRAL STRANDS STRANDS CROSS No. DIAMETER SECTION (mm) (mm²)

25 32 25 32

1.63 1.63 2.05 2.05

52.1 66.7 82.7 105.8

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

32.59 33.61 35.64 36.97

2.03 2.03 2.03 2.03

36.92 37.94 39.98 41.31

1900 2203 2568 3037

0.329 0.261 0.207 0.164

0.3284 0.3199 0.3111 0.3023

22170 20773 19366 18016

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 35 kV Single Copper conductor, 90°C 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

1/0 2/0 3/0 4/0 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

336 376 423 475

0.0829 0.105 0.132 0.166

345 345 345 345

1062 1102 1149 1201

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

25 32 25 32

64 64 81 81

0.0808 0.103 0.128 0.164

1283 1323 1403 1456

80 80 80 80

1454 1494 1574 1626

1277 1481 1726 2041

0.100 0.0795 0.0630 0.0500

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

57

0.5285 0.5148 0.5006 0.4864

13776 12908 12034 11195


MV-90 5 kV Single Aluminum conductor, 90°C (International Unit System) 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

4 2 1 1/0 2/0 3/0 4/0 250 300 350

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65

21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3

CONCENTRIC NEUTRAL INSULATION INSULATION JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE THICKNESS DIAMETER STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ (mm) (mm) No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (mm²) (kg/km)

2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29

10.87 12.27 13.05 13.99 15.01 16.20 17.53 18.91 20.18 21.35 Notes:

10 16 20 26 20 25 32 25 29 32

1.29 1.29 1.29 1.29 1.63 1.63 1.63 2.05 2.05 2.05

13.1 20.9 26.2 34.0 41.7 52.1 66.7 82.7 95.9 105.8

15.23 16.63 17.41 18.35 20.05 21.24 22.57 24.79 26.06 27.23

1.52 1.52 1.52 1.52 1.52 2.03 2.03 2.03 2.03 2.03

18.54 19.94 20.72 21.66 23.36 25.57 26.90 29.13 30.40 31.57

409 543 629 750 883 1109 1333 1577 1796 1984

1.36 0.854 0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162

0.3660 0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817

11824 10081 9319 8544 7838 7150 6512 5961 5531 5187

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 5 kV Single Aluminum conductor, 90°C 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

4 2 1 1/0 2/0 3/0 4/0 250 300 350

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

213 268 299 336 376 423 475 520 570 616

0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275

90 90 90 90 90 90 90 90 90 90

428 483 514 551 591 638 690 744 794 841 Notes:

58

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

10 16 20 26 20 25 32 25 29 32

51 51 51 51 64 64 64 81 81 81

0.0203 0.0325 0.0406 0.0528 0.0646 0.0808 0.103 0.128 0.149 0.164

600 655 686 723 789 836 889 976 1026 1072

60 60 60 60 60 80 80 80 80 80

730 785 816 853 920 1007 1059 1147 1197 1243

275 365 423 504 594 745 896 1060 1207 1333

0.414 0.260 0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

0.5890 0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533

7347 6264 5791 5309 4870 4443 4046 3704 3437 3223


MV-90 8 kV Single Aluminum conductor, 90°C (International Unit System) 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

4 2 1 1/0 2/0 3/0 4/0 250 300 350 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

5.41 6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65

21.2 33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92

12.17 13.57 14.35 15.29 16.31 17.50 18.83 20.21 21.48 22.65

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (mm²) (kg/km)

10 16 20 26 20 25 32 25 29 32

1.29 1.29 1.29 1.29 1.63 1.63 1.63 2.05 2.05 2.05

13.1 20.9 26.2 34.0 41.7 52.1 66.7 82.7 95.9 105.8

16.53 17.93 18.71 19.65 21.35 22.54 23.87 26.09 27.36 28.53

1.52 1.52 1.52 1.52 2.03 2.03 2.03 2.03 2.03 2.03

19.84 21.24 22.02 22.96 25.68 26.87 28.20 30.43 31.70 32.87

445 581 669 791 985 1157 1384 1630 1852 2042

1.36 0.854 0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162

0.3660 0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817

14169 12171 11291 10388 9562 8752 7997 7341 6827 6414

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 8 kV Single Aluminum conductor, 90°C 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

4 2 1 1/0 2/0 3/0 4/0 250 300 350 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

213 268 299 336 376 423 475 520 570 616

0.0328 0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275

115 115 115 115 115 115 115 115 115 115

479 534 565 602 642 689 741 796 846 892

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

10 16 20 26 20 25 32 25 29 32

51 51 51 51 64 64 64 81 81 81

0.0203 0.0325 0.0406 0.0528 0.0646 0.0808 0.103 0.128 0.149 0.164

651 706 737 774 840 887 940 1027 1077 1123

60 60 60 60 80 80 80 80 80 80

781 836 867 904 1011 1058 1110 1198 1248 1294

299 391 449 532 662 778 930 1096 1245 1372

0.414 0.260 0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

59

0.5890 0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533

8804 7563 7016 6455 5942 5438 4969 4562 4242 3985


MV-90 15 kV Single Aluminum conductor, 90°C (International Unit System) 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 250 300 350

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

6.81 7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65

33.6 42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45

16.63 17.41 18.35 19.37 20.56 21.89 23.27 24.54 25.71 Notes:

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (mm²) (kg/km)

16 20 26 20 25 32 25 29 32

1.29 1.29 1.29 1.63 1.63 1.63 2.05 2.05 2.05

20.9 26.2 34.0 41.7 52.1 66.7 82.7 95.9 105.8

20.99 21.77 22.71 24.41 25.60 26.93 29.15 30.42 32.17

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

25.32 26.10 27.04 28.74 29.93 31.26 33.49 34.76 36.51

738 831 960 1103 1281 1514 1766 1994 2224

0.854 0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162

0.3487 0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817

16393 15303 14175 13131 12097 11123 10268 9592 9044

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 15 kV Single Aluminum conductor, 90°C 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

2 1 1/0 2/0 3/0 4/0 250 300 350

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

268 299 336 376 423 475 520 570 616

0.0521 0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275

175 175 175 175 175 175 175 175 175

655 685 722 763 809 862 916 966 1012 Notes:

60

CONCENTRIC NEUTRAL STRANDS No.

16 20 26 20 25 32 25 29 32

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

51 51 51 64 64 64 81 81 81

0.0325 0.0406 0.0528 0.0646 0.0808 0.103 0.128 0.149 0.164

826 857 894 961 1008 1060 1148 1198 1267

80 80 80 80 80 80 80 80 80

997 1028 1065 1131 1178 1231 1318 1368 1437

496 558 645 742 861 1017 1187 1340 1495

0.260 0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494

0.5611 0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

10186 9509 8808 8160 7517 6912 6381 5960 5620


MV-90 25 kV Single Aluminum conductor, 90°C (International Unit System) 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649

Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0 250 300 350 Notes:

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

7.59 8.53 9.55 10.74 12.07 13.21 14.48 15.65

42.4 53.5 67.4 85.0 107.2 126.7 152.0 177.3

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

6.60 6.60 6.60 6.60 6.60 6.60 6.60 6.60

21.67 22.61 23.63 24.82 26.15 27.53 28.80 29.97

CONCENTRIC NEUTRAL STRANDS STRANDS CROSS No. DIAMETER SECTION (mm) (mm²)

20 26 20 25 32 25 29 32

1.29 1.29 1.63 1.63 1.63 2.05 2.05 2.05

26.2 34.0 41.7 52.1 66.7 82.7 95.9 105.8

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (kg/km)

26.03 26.97 28.67 29.86 31.77 33.99 35.26 36.43

2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03

30.36 31.30 33.00 34.19 36.10 38.33 39.60 40.77

1006 1141 1291 1476 1753 2015 2252 2455

0.678 0.537 0.426 0.338 0.268 0.227 0.189 0.162

0.3372 0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817

19847 18509 17258 16006 14814 13758 12915 12227

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 25 kV Single Aluminum conductor, 90°C 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649

Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

1 1/0 2/0 3/0 4/0 250 300 350 Notes:

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

299 336 376 423 475 520 570 616

0.0657 0.0829 0.105 0.132 0.166 0.196 0.236 0.275

260 260 260 260 260 260 260 260

853 890 930 977 1030 1084 1134 1180

CONCENTRIC NEUTRAL STRANDS No.

20 26 20 25 32 25 29 32

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

51 51 64 64 64 81 81 81

0.0406 0.0528 0.0646 0.0808 0.103 0.128 0.149 0.164

1025 1062 1129 1176 1251 1338 1388 1434

80 80 80 80 80 80 80 80

1195 1232 1299 1346 1421 1509 1559 1605

676 767 868 992 1178 1354 1513 1650

0.207 0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

61

0.5427 0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533

12333 11501 10724 9946 9205 8549 8025 7598


MV-90 35 kV Single Aluminum conductor, 90°C (International Unit System) 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV.

SIZE AWG / kcmil

1/0 2/0 3/0 4/0 250 300 350

CONDUCTOR CROSS DIAMETER SECTION (mm) (mm²)

8.53 9.55 10.74 12.07 13.21 14.48 15.65

53.5 67.4 85.0 107.2 126.7 152.0 177.3

INSULATION INSULATION THICKNESS DIAMETER (mm) (mm)

8.76 8.76 8.76 8.76 8.76 8.76 8.76

26.97 27.99 29.18 30.51 31.89 33.16 34.33 Notes:

CONCENTRIC NEUTRAL JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ No. DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (mm²) (kg/km)

26 20 25 32 25 29 32

1.29 1.63 1.63 1.63 2.05 2.05 2.05

34.0 41.7 52.1 66.7 82.7 95.9 105.8

31.91 33.61 34.80 36.13 38.35 39.62 40.79

2.03 2.03 2.03 2.03 2.03 2.03 2.03

36.24 37.94 39.13 40.46 42.69 43.96 45.13

1390 1548 1742 1992 2263 2508 2719

0.537 0.426 0.338 0.268 0.227 0.189 0.162

0.3284 0.3199 0.3111 0.3023 0.2945 0.2875 0.2817

22170 20773 19366 18016 16810 15841 15047

1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper and 28.172 ohm-mm2/km for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 19.5 cm separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

MV-90 35 kV Single Aluminum conductor, 90°C 100% Insulation Level, 100% Concentric Neutral Standards: UL 1072. Medium Voltage Power Cables MV90, ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5-46 kV. SIZE AWG / kcmil

1/0 2/0 3/0 4/0 250 300 350

CONDUCTOR CROSS INSULATION INSULATION DIAMETER SECTION THICKNESS DIAMETER (mm) (sq inches) (mm) (mm)

336 376 423 475 520 570 616

0.0829 0.105 0.132 0.166 0.196 0.236 0.275

345 345 345 345 345 345 345

1062 1102 1149 1201 1256 1306 1352 Notes:

62

CONCENTRIC NEUTRAL STRANDS No.

26 20 25 32 25 29 32

JACKET OVERALL APPROXIMATE DC RESISTANT INDUCTIVE CAPACITIVE STRANDS CROSS DIAMETER THICKNESS DIAMETER TOTAL REACTANCE² REACTANCE² AT 20°C¹ DIAMETER SECTION No. (mm) (mm) WEIGHT (ohm/km) (ohm-km) (ohm/km) (mm) (sq inches) (kg/km)

51 64 64 64 81 81 81

0.0528 0.0646 0.0808 0.103 0.128 0.149 0.164

1256 1323 1370 1422 1510 1560 1606

80 80 80 80 80 80 80

1427 1494 1541 1593 1681 1731 1777

934 1040 1170 1339 1521 1686 1827

0.164 0.130 0.103 0.0817 0.0691 0.0576 0.0494

0.5285 0.5148 0.5006 0.4864 0.4739 0.4627 0.4533

1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper and 16.946 ohm-cmil/ft for aluminum. 2. Inductive and capacitive reactance at 60 Hz and a 7.5 inches separation between phases in flat configuration. 3. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

13776 12908 12034 11195 10446 9844 9350


Covered Cable for Treed Zones 5 - 46 kV

Description ACSR thermo set covered.

Contruction Conductor ACSR cable, compressed. Conductor Shield Cross linked polyethylene semiconductor. Blocking against moisture Conductor filled with blocking compounds against moisture. Conductor shield Cross linked polyethylene semiconductor (for voltages greater than 5 kV). Covering Cross linked polyethylene XLPE tracking resistant. One single layer for 5 kV Cables. Two layers, inner layer natural XLPE, and external layer black XLPE. Options AAC or AAAC conductors.

Characteristics Operating Temperature Normal continuous operation 90째C for wet or dry locations. Overload 130째C. Short circuit 250째C. Rated Voltage 5, 8, 15, 25 and 35 kV.

63


Applications Distribution of electric energy in treed Areas or Industrial Zones. This cable offers more reliability in operation because of outage reduction by accidental contacts between phases, phase and ground. Maintenance and cutting trees cost also are reduced. The external cover is sunlight resistant, corrosive and contaminants agent resistant and tracking resistant.

Standards CENTELSA’s 5-35 kV Covered conductors are manufactured in accordance with the following standards: ASTM B232, NTC-ICONTEC 309. Aluminum Conductor Steel Reinforced. ABNT EB-2173 Overhead cables XLPR covered for use in treed areas, 15 and 25 kV Voltages. CENTELSA’s specifications for covered cables from 5 to 46 kV.

Note: Configurations and sizes herein not specified are available upon request.

64


Covered Cable for treed zones 5 kV 90°C (International Unit System) Standards: ABNT 2173 AND CENTELSA’S Specifications.

ACSR CODE

SIZE AWG / kcmil

4 2 1 1/0 2/0 3/0 4/0 266.8 336.4 Notes:

SWAN SPARROW ROBIN RAVEN QUAIL PIGEON PENGUIN WAXWING MERLIN

STRANDS ALUMINUM

STEEL

6 6 6 6 6 6 6 18 18

1 1 1 1 1 1 1 1 1

CONDUCTOR DIAMETER (mm)

6.16 7.78 8.73 9.81 11.01 12.36 13.88 15.00 16.84

CROSS SECTION ALUMINUM (mm²)

21.2 33.6 42.4 53.5 67.5 85.0 107.2 135.2 170.5

STEEL (mm²)

3.5 5.6 7.1 8.9 11.2 14.2 17.9 7.5 9.5

COVERING THICKNESS (mm)

2.16 2.16 2.16 2.16 2.16 2.16 2.16 2.16 2.16

OVERALL DIAMETER (mm)

10.60 12.22 13.17 14.25 15.45 16.80 18.32 19.44 21.28

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

151 218 264 321 392 480 589 598 737

1.32 0.829 0.658 0.521 0.414 0.328 0.260 0.211 0.167

APPROXIMATE TOTAL WEIGHT (lb/1000ft)

DC RESISTANT AT 20°C¹ (ohm/1000ft)

102 147 178 216 263 322 396 402 495

0.402 0.253 0.201 0.159 0.126 0.100 0.079 0.064 0.051

1. DC resistance calculated based on a 28,1721 ohm-mm2/km resistivity for aluminum and 191,57 ohm-mm2/km for galvanized steel. 2. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

Covered Cable for treed zones 5 kV 90°C Standards: ABNT 2173 AND CENTELSA’S Specifications.

SIZE AWG / kcmil

ACSR CODE

4 2 1 1/0 2/0 3/0 4/0 266.8 336.4

SWAN SPARROW ROBIN RAVEN QUAIL PIGEON PENGUIN WAXWING MERLIN

Notes:

STRANDS ALUMINUM

STEEL

6 6 6 6 6 6 6 18 18

1 1 1 1 1 1 1 1 1

CONDUCTOR DIAMETER (mils)

243 306 344 386 433 487 546 591 663

CROSS SECTION ALUMINUM (sq inches)

0.0328 0.0521 0.0657 0.0830 0.105 0.132 0.210 0.264 0.312

STEEL (sq inches)

0.00547 0.00870 0.0110 0.0138 0.0174 0.0220 0.0116 0.0147 0.0173

COVERING THICKNESS (mils)

85 85 85 85 85 85 85 85 85

OVERALL DIAMETER (mils)

417 481 519 561 608 661 721 765 838

1. DC resistance calculated based on a 16.964 ohm-cmil/ft resistivity for aluminum and 115,23 ohm-cmil/ft for galvanized steel. 2. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

65


Covered Cable for treed zones 15 kV 90°C (International Unit System) Standards: ABNT 2173 AND CENTELSA’S Specifications.

SIZE AWG / kcmil

ACSR CODE

4 2 1 1/0 2/0 3/0 4/0 266.8 336.4 397.5 477 556.5 636

SWAN SPARROW ROBIN RAVEN QUAIL PIGEON PENGUIN WAXWING MERLIN CHICADEE PELICAN OSPREY KINGBIRD

STRANDS ALUMINUM

STEEL

6 6 6 6 6 6 6 18 18 18 18 18 18

1 1 1 1 1 1 1 1 1 1 1 1 1

CROSS SECTION CONDUCTOR DIAMETER (mm) ALUMINUM STEEL (mm²) (mm²)

6.16 7.78 8.73 9.81 11.01 12.36 13.88 15.00 16.84 18.31 20.05 21.66 23.16 Notes:

21.2 33.6 42.4 53.5 67.5 85.0 107.2 135.2 170.5 201.5 241.7 282.1 322.3

3.5 5.6 7.1 8.9 11.2 14.2 17.9 7.5 9.5 11.2 13.4 15.7 17.9

CONDUCTOR SHIELD THICKNESS (mm)

1st LAYER COVERING THICKNESS (mm)

0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.45 0.45 0.45 0.45 0.57 0.57

1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91

2nd LAYER COVERING THICKNESS (mm)

1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91 1.91

OVERALL DIAMETER (mm)

16.06 17.68 18.63 19.71 20.91 22.26 23.78 25.14 26.98 27.25 28.99 30.82 32.32

APPROXIMATE TOTAL WEIGHT (kg/km)

243 318 369 431 506 600 716 750 898 965 1120 1286 1439

DC RESISTANT AT 20°C¹ (ohm/km)

1.32 0.829 0.658 0.521 0.414 0.328 0.260 0.211 0.167 0.141 0.118 0.101 0.088

1. DC resistance calculated based on a 28,1721 ohm-mm2/km resistivity for aluminum and 191,57 ohm-mm2/km for galvanized steel. 2. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

Covered Cable for treed zones 15 kV 90°C Standards: ABNT 2173 AND CENTELSA’S Specifications.

SIZE AWG / kcmil

4 2 1 1/0 2/0 3/0 4/0 266.8 336.4 397.5 477 556.5 636

ACSR CODE

SWAN SPARROW ROBIN RAVEN QUAIL PIGEON PENGUIN WAXWING MERLIN CHICADEE PELICAN OSPREY KINGBIRD

STRANDS ALUMINUM

STEEL

6 6 6 6 6 6 6 18 18 18 18 18 18

1 1 1 1 1 1 1 1 1 1 1 1 1

CROSS SECTION CONDUCTOR CONDUCTOR SHIELD DIAMETER THICKNESS (mils) ALUMINUM STEEL (mils) (sq inches) (sq inches)

243 306 344 386 433 487 546 591 663 721 790 853 912 Notes:

66

0.0328 0.0521 0.0657 0.0830 0.105 0.132 0.210 0.264 0.312 0.375 0.437 0.166 0.500

0.00547 0.00870 0.0110 0.0138 0.0174 0.0220 0.0116 0.0147 0.0173 0.0208 0.0243 0.0277 0.0278

13 13 13 13 13 13 13 18 18 18 18 22 22

1st LAYER COVERING THICKNESS (mils)

75 75 75 75 75 75 75 75 75 75 75 75 75

2nd LAYER COVERING THICKNESS (mils)

75 75 75 75 75 75 75 75 75 75 75 75 75

OVERALL DIAMETER (mils)

APPROXIMATE TOTAL WEIGHT (lb/1000 ft)

632 696 733 776 823 876 936 990 1062 1073 1142 1214 1272

164 214 248 290 340 403 481 504 603 648 753 864 967

DC RESISTANT AT 20°C¹ (ohm/1000 ft)

0.402 0.253 0.201 0.159 0.126 0.100 0.079 0.064 0.051 0.043 0.036 0.031 0.027

1. DC resistance calculated based on a 16.964 ohm-cmil/ft resistivity for aluminum and 115,23 ohm-cmil/ft for galvanized steel. 2. Data herein indicated are approximate and are subject to normal manufacturing tolerances.


Covered Cable for treed zones 25 kV 90°C (International Unit System) Standards: ABNT 2173 AND CENTELSA’S Specifications.

SIZE AWG / kcmil

ACSR CODE

2 1 1/0 2/0 3/0 4/0 266.8 336.4 397.5 477 556.5 636

SPARROW ROBIN RAVEN QUAIL PIGEON PENGUIN WAXWING MERLIN CHICADEE PELICAN OSPREY KINGBIRD

Notes:

STRANDS ALUMINUM

6 6 6 6 6 6 18 18 18 18 18 18

STEEL

1 1 1 1 1 1 1 1 1 1 1 1

CROSS SECTION CONDUCTOR DIAMETER (mm) ALUMINUM STEEL (mm²) (mm²)

7.78 8.73 9.81 11.01 12.36 13.88 15.00 16.84 18.31 20.05 21.66 23.16

33.6 42.4 53.5 67.5 85.0 107.2 135.2 170.5 201.5 241.7 282.1 322.3

5.6 7.1 8.9 11.2 14.2 17.9 7.5 9.5 11.2 13.4 15.7 17.9

CONDUCTOR SHIELD THICKNESS (mm)

1st LAYER COVERING THICKNESS (mm)

0.34 0.34 0.34 0.34 0.34 0.34 0.45 0.45 0.45 0.45 0.57 0.57

3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18

2nd LAYER COVERING THICKNESS (mm)

3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18

OVERALL DIAMETER (mm)

APPROXIMATE TOTAL WEIGHT (kg/km)

22.84 23.79 24.87 26.07 27.42 28.94 30.30 32.14 32.41 34.15 35.98 37.48

471 528 598 683 786 914 958 1119 1188 1357 1536 1700

OVERALL DIAMETER (mils)

APPROXIMATE TOTAL WEIGHT (lb/1000 ft)

899 937 979 1026 1079 1139 1193 1266 1276 1345 1417 1476

316 355 402 459 528 614 644 752 799 912 1033 1143

DC RESISTANT AT 20°C¹ (ohm/km)

0.829 0.658 0.521 0.414 0.328 0.260 0.211 0.167 0.141 0.118 0.101 0.088

1. DC resistance calculated based on a 28,1721 ohm-mm2/km resistivity for aluminum and 191,57 ohm-mm2/km for galvanized steel. 2. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

Covered Cable for treed zones 25 kV 90°C Standards: ABNT 2173 AND CENTELSA’S Specifications.

SIZE AWG / kcmil

ACSR CODE

2 1 1/0 2/0 3/0 4/0 266.8 336.4 397.5 477 556.5 636

SPARROW ROBIN RAVEN QUAIL PIGEON PENGUIN WAXWING MERLIN CHICADEE PELICAN OSPREY KINGBIRD

Notes:

STRANDS ALUMINUM

6 6 6 6 6 6 18 18 18 18 18 18

STEEL

1 1 1 1 1 1 1 1 1 1 1 1

CROSS SECTION CONDUCTOR CONDUCTOR SHIELD DIAMETER THICKNESS (mils) ALUMINUM STEEL (mils) (sq inches) (sq inches)

306 344 386 433 487 546 591 663 721 790 853 912

0.0521 0.0657 0.0830 0.105 0.132 0.210 0.264 0.312 0.375 0.437 0.166 0.500

0.00870 0.0110 0.0138 0.0174 0.0220 0.0116 0.0147 0.0173 0.0208 0.0243 0.0277 0.0278

13 13 13 13 13 13 18 18 18 18 22 22

1st LAYER COVERING THICKNESS (mils)

125 125 125 125 125 125 125 125 125 125 125 125

2nd LAYER COVERING THICKNESS (mils)

125 125 125 125 125 125 125 125 125 125 125 125

1. DC resistance calculated based on a 16.964 ohm-cmil/ft resistivity for aluminum and 115,23 ohm-cmil/ft for galvanized steel. 2. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

67

DC RESISTANT AT 20°C¹ (ohm/1000 ft)

0.253 0.201 0.159 0.126 0.100 0.079 0.064 0.051 0.043 0.036 0.031 0.027


Covered Cable for treed zones 35 kV 90°C (International Unit System) Standards: ABNT 2173 AND CENTELSA’S Specifications.

SIZE AWG / kcmil

ACSR CODE

1/0 2/0 3/0 4/0 266.8 336.4 397.5 477 556.5 636

RAVEN QUAIL PIGEON PENGUIN WAXWING MERLIN CHICADEE PELICAN OSPREY KINGBIRD

STRANDS ALUMINUM

6 6 6 6 18 18 18 18 18 18

STEEL

1 1 1 1 1 1 1 1 1 1

CROSS SECTION CONDUCTOR DIAMETER (mm) ALUMINUM STEEL (mm²) (mm²)

9.81 11.01 12.36 13.88 15.00 16.84 18.31 20.05 21.66 23.16 Notes:

53.5 67.5 85.0 107.2 135.2 170.5 201.5 241.7 282.1 322.3

8.9 11.2 14.2 17.9 7.5 9.5 11.2 13.4 15.7 17.9

CONDUCTOR SHIELD THICKNESS (mm)

1st LAYER COVERING THICKNESS (mm)

0.34 0.34 0.34 0.34 0.45 0.45 0.45 0.45 0.57 0.57

4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45

2nd LAYER COVERING THICKNESS (mm)

3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18

OVERALL DIAMETER (mm)

APPROXIMATE TOTAL WEIGHT (kg/km)

24.87 26.07 27.42 28.94 30.30 32.14 32.41 34.15 35.98 37.48

598 683 786 914 958 1119 1188 1357 1536 1700

DC RESISTANT AT 20°C¹ (ohm/km)

0.521 0.414 0.328 0.260 0.211 0.167 0.141 0.118 0.101 0.088

1. DC resistance calculated based on a 28,1721 ohm-mm2/km resistivity for aluminum and 191,57 ohm-mm2/km for galvanized steel. 2. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

Covered Cable for treed zones 35 kV 90°C Standards: ABNT 2173 AND CENTELSA’S Specifications.

SIZE AWG / kcmil

ACSR CODE

1/0 2/0 3/0 4/0 266.8 336.4 397.5 477 556.5 636

RAVEN QUAIL PIGEON PENGUIN WAXWING MERLIN CHICADEE PELICAN OSPREY KINGBIRD

STRANDS ALUMINUM

6 6 6 6 18 18 18 18 18 18

STEEL

CROSS SECTION CONDUCTOR CONDUCTOR SHIELD DIAMETER THICKNESS (mils) ALUMINUM STEEL (mils) (sq inches) (sq inches)

1 1 1 1 1 1 1 1 1 1

386 433 487 546 591 663 721 790 853 912 Notes:

68

0.0830 0.105 0.132 0.210 0.264 0.312 0.375 0.437 0.166 0.500

0.0138 0.0174 0.0220 0.0116 0.0147 0.0173 0.0208 0.0243 0.0277 0.0278

13 13 13 13 18 18 18 18 22 22

1st LAYER COVERING THICKNESS (mils)

175 175 175 175 175 175 175 175 175 175

2nd LAYER COVERING THICKNESS (mils)

125 125 125 125 125 125 125 125 125 125

OVERALL DIAMETER (mils)

APPROXIMATE TOTAL WEIGHT (lb/1000 ft)

979 1026 1079 1139 1193 1266 1276 1345 1417 1476

402 459 528 614 644 752 799 912 1033 1143

DC RESISTANT AT 20°C¹ (ohm/1000 ft)

0.159 0.126 0.100 0.079 0.064 0.051 0.043 0.036 0.031 0.027

1. DC resistance calculated based on a 16.964 ohm-cmil/ft resistivity for aluminum and 115,23 ohm-cmil/ft for galvanized steel. 2. Data herein indicated are approximate and are subject to normal manufacturing tolerances.


Covered Cable for treed zones 46 kV 90°C (International Unit System) Standards: ABNT 2173 AND CENTELSA’S Specifications.

SIZE AWG / kcmil

ACSR CODE

1/0 2/0 3/0 4/0 266.8 336.4 397.5 477 556.5 636

RAVEN QUAIL PIGEON PENGUIN WAXWING MERLIN CHICADEE PELICAN OSPREY KINGBIRD

Notes:

STRANDS ALUMINUM

STEEL

6 6 6 6 18 18 18 18 18 18

1 1 1 1 1 1 1 1 1 1

CROSS SECTION CONDUCTOR DIAMETER (mm) ALUMINUM STEEL (mm²) (mm²)

9.81 11.01 12.36 13.88 15.00 16.84 18.31 20.05 21.66 23.16

53.5 67.5 85.0 107.2 135.2 170.5 201.5 241.7 282.1 322.3

8.9 11.2 14.2 17.9 7.5 9.5 11.2 13.4 15.7 17.9

CONDUCTOR SHIELD THICKNESS (mm)

1st LAYER COVERING THICKNESS (mm)

2nd LAYER COVERING THICKNESS (mm)

OVERALL DIAMETER (mm)

APPROXIMATE TOTAL WEIGHT (kg/km)

DC RESISTANT AT 20°C¹ (ohm/km)

0.34 0.34 0.34 0.34 0.45 0.45 0.45 0.45 0.57 0.57

5.72 5.72 5.72 5.72 5.72 5.72 5.72 5.72 5.72 5.72

4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45

29.91 31.11 32.46 33.98 35.34 37.18 37.45 39.19 41.02 42.52

799 892 1006 1144 1198 1374 1444 1626 1819 1994

0.521 0.414 0.328 0.260 0.211 0.167 0.141 0.118 0.101 0.088

1. DC resistance calculated based on a 28,1721 ohm-mm2/km resistivity for aluminum and 191,57 ohm-mm2/km for galvanized steel. 2. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

Covered Cable for treed zones 46 kV 90°C Standards: ABNT 2173 AND CENTELSA’S Specifications.

SIZE AWG / kcmil

1/0 2/0 3/0 4/0 266.8 336.4 397.5 477 556.5 636 Notes:

ACSR CODE

RAVEN QUAIL PIGEON PENGUIN WAXWING MERLIN CHICADEE PELICAN OSPREY KINGBIRD

STRANDS ALUMINUM

STEEL

6 6 6 6 18 18 18 18 18 18

1 1 1 1 1 1 1 1 1 1

CROSS SECTION CONDUCTOR CONDUCTOR SHIELD DIAMETER THICKNESS (mils) ALUMINUM STEEL (mils) (sq inches) (sq inches)

386 433 487 546 591 663 721 790 853 912

0.0830 0.105 0.132 0.210 0.264 0.312 0.375 0.437 0.166 0.500

0.0138 0.0174 0.0220 0.0116 0.0147 0.0173 0.0208 0.0243 0.0277 0.0278

13 13 13 13 18 18 18 18 22 22

1st LAYER COVERING THICKNESS (mils)

2nd LAYER COVERING THICKNESS (mils)

OVERALL DIAMETER (mils)

APPROXIMATE TOTAL WEIGHT (lb/1000 ft)

DC RESISTANT AT 20°C¹ (ohm/1000 ft)

225 225 225 225 225 225 225 225 225 225

175 175 175 175 175 175 175 175 175 175

1178 1225 1278 1338 1391 1464 1474 1543 1615 1674

537 600 676 769 805 923 971 1093 1222 1340

0.159 0.126 0.100 0.079 0.064 0.051 0.043 0.036 0.031 0.027

1. DC resistance calculated based on a 16.964 ohm-cmil/ft resistivity for aluminum and 115,23 ohm-cmil/ft for galvanized steel. 2. Data herein indicated are approximate and are subject to normal manufacturing tolerances.

69


Medium Voltage Cables Ampacity Ampacity (Amperes) Triplexed conductors Air Installation. 40°C Ambient Temperature. 90°C and 105°C Conductor Temperature. SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000 Notes:

CROSS SECTION (mm²)

COPPER CONDUCTOR¹ 2001 - 5000 Volts

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ALUMINUM CONDUCTOR²

5001 - 35000 Volts

2001 - 5000 Volts

5001 - 35000 Volts

90° C

105° C

90° C

105° C

90° C

105° C

90° C

105° C

65 90 120 160 185 215 250 290 335 375 465 580 750 880

74 99 130 175 205 240 275 320 375 415 515 645 835 980

100 130 170 195 225 260 300 345 380 470 580 730 850

110 140 195 225 255 295 340 390 430 525 650 820 950

50 70 90 125 145 170 195 225 265 295 365 460 600 715

57 77 100 135 160 185 215 250 290 325 405 510 665 800

75 100 130 150 175 200 230 270 300 370 460 590 700

84 110 150 175 200 230 265 305 335 415 515 660 780

1. NEC Table 310-67. 2. NEC Table 310-68.

Ampacity (Amperes) Single conductors Air Installation. 40°C Ambient Temperature. 90°C and 105°C Conductor Temperature. SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000

CROSS SECTION (mm²)

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

COPPER CONDUCTOR¹ 2001 - 5000 Volts

5001 - 15000 Volts

ALUMINUM CONDUCTOR² 5001 - 15000 Volts

15001 - 35000 Volts

90° C

105° C

90° C

105° C

90° C

105° C

90° C

105° C

90° C

105° C

90° C

105° C

83 110 145 190 225 260 300 345 400 445 550 695 900 1075

93 120 160 215 250 290 330 385 445 495 615 775 1000 1200

110 150 195 225 260 300 345 400 445 550 685 885 1060

125 165 215 250 290 335 385 445 495 610 765 990 1185

225 260 300 345 395 440 545 680 870 1040

250 290 330 380 445 490 605 755 970 1160

64 85 115 150 175 200 230 270 310 345 430 545 710 855

71 95 125 165 195 225 260 300 350 385 480 605 790 950

87 115 150 175 200 235 270 310 345 430 535 700 840

97 130 170 195 225 260 300 350 385 480 600 780 940

175 200 230 270 310 345 430 530 685 825

195 225 260 300 345 380 475 590 765 920

Notes:

70

1. NEC Table 310-69. 2. NEC Table 310-70.

15001 - 35000 Volts

2001 - 5000 Volts


Ampacity (Amperes) Three conductors cable Air Installation. 40°C Ambient Temperature. 90°C and 105°C Conductor Temperature. CROSS SECTION (mm²)

SIZE AWG / kcmil

COPPER CONDUCTOR¹ 2001 - 5000 Volts 90° C

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000 Notes:

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

59 79 105 140 160 185 215 250 285 320 395 485 615 705

ALUMINUM CONDUCTOR²

5001 - 35000 Volts

105° C

90° C

66 88 115 154 180 205 240 280 320 355 440 545 685 790

93 120 165 185 215 245 285 325 360 435 535 670 770

2001 - 5000 Volts

5001 - 35000 Volts

105° C

90° C

105° C

90° C

105° C

105 135 185 210 240 275 315 360 400 490 600 745 860

46 61 81 110 125 145 170 195 225 250 310 385 495 585

51 68 90 120 140 160 185 215 250 280 345 430 550 650

72 95 125 145 170 190 220 255 280 345 425 540 635

80 105 145 165 185 215 245 285 315 385 475 600 705

1. NEC Table 310-71. 2. NEC Table 310-72.

Ampacity (Amperes) Triplexed or three conductors cable Installation in insulated duct at air. 40°C Ambient Temperature. 90°C and 105°C Conductor Temperature. SIZE AWG / kcmil

CROSS SECTION (mm²)

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

Notes:

COPPER CONDUCTOR¹ 2001 - 5000 Volts

ALUMINUM CONDUCTOR²

5001 - 35000 Volts

2001 - 5000 Volts

5001 - 35000 Volts

90° C

105° C

90° C

105° C

90° C

105° C

90° C

105° C

55 75 97 130 155 180 205 240 280 315 385 475 600 690

61 84 110 145 175 200 225 270 305 355 430 530 665 770

83 110 150 170 195 225 260 295 330 395 480 585 675

93 120 165 190 215 255 290 330 365 440 535 655 755

43 58 76 100 120 140 160 190 215 250 305 380 490 580

48 65 85 115 135 155 175 210 240 280 340 425 545 645

65 84 115 130 150 175 200 230 255 310 385 485 565

72 94 130 150 170 200 225 260 290 350 430 540 640

1. NEC Table 310-73 2. NEC Table 310-74

71


Ampacity (Amperes) Three conductors cable Installation in insulated duct at air. 40°C Ambient Temperature. 90°C and 105°C Conductor Temperature. SIZE AWG / kcmil

CROSS SECTION (mm²)

COPPER CONDUCTOR¹ 2001 - 5000 Volts 90° C

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000 Notes:

72

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

52 69 91 125 140 165 190 220 255 280 350 425 525 590

1. NEC Table 310-75. 2. NEC Table 310-76.

105° C

58 77 100 135 155 185 210 245 285 315 390 475 585 660

ALUMINUM CONDUCTOR²

5001 - 35000 Volts 90° C

83 105 145 165 195 220 250 290 315 385 470 570 650

2001 - 5000 Volts

5001 - 35000 Volts

105° C

90° C

105° C

90° C

105° C

92 120 165 185 215 245 280 320 350 430 525 635 725

41 53 71 96 110 130 150 170 200 220 275 340 430 505

46 59 79 105 125 145 165 190 225 245 305 380 480 560

64 84 115 130 150 170 195 225 250 305 380 470 550

71 94 125 145 170 190 220 255 280 340 425 520 615


Ampacity (Amperes) Three single conductors IInstallation in underground electrical ducts (Three conductors by each electrical duct). 20°C Ambient Temperature (Earth). 100% Load Factor. RHO 90. 90°C and 105°C Conductor Temperature. COPPER CONDUCTOR ¹ SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000

CROSS SECTION (mm²)

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ONE CIRCUIT - FIGURE 1 2001 - 5000 Volts

THREE CIRCUITS - FIGURE 2

5001 - 35000 Volts

2001 - 5000 Volts

SIX CIRCUITS - FIGURE 3

5001 - 35000 Volts

2001 - 5000 Volts

5001 - 35000 Volts

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

64 85 110 145 170 195 220 250 290 320 385 470 585 670

69 92 120 155 180 210 235 270 310 345 415 505 630 720

90 115 155 175 200 230 260 295 325 390 465 565 640

97 125 165 185 215 245 275 315 345 415 500 610 690

56 73 95 125 140 160 185 210 235 260 315 375 460 525

60 79 100 130 150 175 195 225 255 280 335 405 495 565

77 99 130 145 165 185 210 240 260 310 370 440 495

83 105 135 155 175 200 225 255 280 330 395 475 535

48 62 80 105 115 135 150 170 195 210 250 300 365 410

52 67 86 110 125 145 160 185 210 225 270 325 395 445

64 82 105 120 135 150 170 190 210 245 290 350 390

68 88 115 125 145 165 185 205 225 265 310 375 415

ALUMINUM CONDUCTOR ² SIZE AWG / kcmil

CROSS SECTION (mm²)

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ONE CIRCUIT - FIGURE 1 2001 - 5000 Volts 90°C

Notes:

50 66 86 115 130 150 170 195 225 250 305 370 470 545

105°C

54 71 93 125 140 160 185 210 245 270 325 400 505 590

THREE CIRCUITS - FIGURE 2

5001 - 35000 Volts 90°C

70 91 120 135 155 175 200 230 250 305 370 455 525

105°C

75 98 130 145 165 190 215 245 270 330 400 490 565

2001 - 5000 Volts 90°C

44 57 74 96 110 125 145 160 185 205 245 295 370 425

105°C

47 61 80 105 120 135 155 175 200 220 265 320 395 460

SIX CIRCUITS - FIGURE 3

5001 - 35000 Volts 90°C

60 77 100 110 125 145 165 185 200 245 290 355 405

105°C

65 83 105 120 140 155 175 200 220 260 315 385 440

2001 - 5000 Volts

5001 - 35000 Volts

90°C

105°C

90°C

105°C

38 48 62 80 91 105 115 135 150 165 195 240 290 335

41 52 67 86 98 110 125 145 165 180 210 255 315 360

50 64 80 90 105 115 130 150 165 195 230 280 320

54 69 88 99 110 125 145 160 175 210 250 305 345

1. NEC Table 310-77. 2. NEC Table 310-78.

73


Ampacity (Amperes) Three conductors cable Installation in underground electrical ducts (One conductor by each electrical duct). 20°C Ambient Temperature (Earth). 100% Load Factor. RHO 90. 90°C and 105°C Conductor Temperature. COPPER CONDUCTOR ¹ SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000

CROSS SECTION (mm²)

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ONE CIRCUIT - FIGURE 1 2001 - 5000 Volts

THREE CIRCUITS - FIGURE 2

5001 - 35000 Volts

2001 - 5000 Volts

SIX CIRCUITS - FIGURE 3

5001 - 35000 Volts

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

59 78 100 135 155 175 200 230 265 290 355 430 530 600

64 84 110 145 165 190 220 250 285 315 380 460 570 645

88 115 150 170 195 220 250 285 310 375 450 545 615

95 125 160 185 210 235 270 305 335 400 485 585 660

53 69 89 115 135 150 170 195 225 245 295 355 430 485

57 74 96 125 145 165 185 210 240 265 315 380 465 520

75 97 125 140 160 185 205 230 255 305 360 430 485

81 105 135 155 175 195 220 250 270 325 385 465 515

2001 - 5000 Volts

5001 - 35000 Volts

90°C

105°C

90°C

105°C

46 60 77 98 110 125 145 165 185 200 240 290 350 390

50 65 83 105 120 135 155 175 200 220 270 310 375 420

63 81 105 115 130 150 170 190 205 245 290 340 380

68 87 110 125 145 160 180 200 220 275 305 365 405

ALUMINUM CONDUCTOR ² SIZE AWG / kcmil

CROSS SECTION (mm²)

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ONE CIRCUIT - FIGURE 1 2001 - 5000 Volts

THREE CIRCUITS - FIGURE 2

5001 - 35000 Volts

2001 - 5000 Volts

SIX CIRCUITS - FIGURE 3

5001 - 35000 Volts

2001 - 5000 Volts

5001 - 35000 Volts

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

46 61 80 105 120 140 160 180 205 230 280 340 425 495

50 66 86 110 130 150 170 195 220 245 310 365 460 535

69 89 115 135 150 170 195 220 245 295 355 440 510

74 96 125 145 165 185 210 240 265 315 385 475 545

41 54 70 90 105 120 135 155 175 190 230 280 345 400

44 58 75 97 110 125 145 165 185 205 250 300 375 430

59 75 100 110 125 140 160 180 200 240 285 350 400

64 81 105 120 135 155 175 195 215 255 305 375 430

36 46 60 77 87 99 110 130 145 160 190 230 280 320

39 50 65 83 94 105 120 140 155 170 205 245 305 345

49 63 80 90 105 115 130 150 160 190 230 275 315

53 68 86 98 110 125 140 160 170 205 245 295 335

Notes:

74

1. NEC Table 310-79. 2. NEC Table 310-80.


Ampacity (Amperes) Single conductor Installation in direct buried. 20°C Ambient Temperature (Earth). 100% Load Factor. RHO 90. 90°C and 105°C Conductor Temperature. COPPER CONDUCTOR ¹ SIZE AWG / kcmil

CROSS SECTION (mm2)

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ONE CIRCUIT, THREE CONDUCTORS - FIGURE 4 2001 - 5000 Volts

5001 - 35000 Volts

TWO CIRCUITS, SIX CONDUCTORS - FIGURE 5 2001 - 5000 Volts

5001 - 35000 Volts

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

110 140 180 230 260 295 335 385 435 470 570 690 845 980

115 150 195 250 280 320 365 415 465 510 615 745 910 1055

130 170 210 240 275 310 355 405 440 535 650 805 930

140 180 225 260 295 335 380 435 475 575 700 865 1005

100 130 165 215 240 275 310 355 400 435 520 630 775 890

110 140 180 230 260 295 335 380 430 470 560 680 835 960

120 160 195 225 255 290 330 375 410 495 600 740 855

130 170 210 240 275 315 355 405 440 530 645 795 920

ALUMINUM CONDUCTOR ² SIZE AWG / kcmil

CROSS SECTION (mm2)

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000 Notes:

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ONE CIRCUIT, THREE CONDUCTORS - FIGURE 4 2001 - 5000 Volts 90°C

105°C

85 110 140 180 205 230 265 300 340 370 445 540 665 780

90 115 150 195 220 250 285 320 365 395 480 580 720 840

5001 - 35000 Volts 90°C

100 130 165 185 215 245 275 315 345 415 510 635 740

TWO CIRCUITS, SIX CONDUCTORS - FIGURE 5 2001 - 5000 Volts

5001 - 35000 Volts

105°C

90°C

105°C

90°C

105°C

110 140 175 200 230 260 295 340 370 450 545 680 795

80 100 130 165 190 215 245 275 310 340 410 495 610 710

85 110 140 180 200 230 260 295 335 365 440 530 655 765

95 125 155 175 200 225 255 290 320 385 470 580 680

100 130 165 190 215 245 275 315 345 415 505 625 730

1. NEC Table 310-81. 2. NEC Table 310-82.

75


Ampacity (Amperes) Three conductor cable Installation in direct buried. 20°C Ambient Temperature (Earth). 100% Load Factor. RHO 90. 90°C and 105°C Conductor Temperature. COPPER CONDUCTOR ¹ SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000

CROSS SECTION (mm2)

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ONE CIRCUIT - FIGURE 6 2001 - 5000 Volts

TWO CIRCUITS - FIGURE 7

5001 - 35000 Volts

2001 - 5000 Volts

5001 - 35000 Volts

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

85 105 135 180 200 230 260 295 335 365 440 530 650 730

89 115 150 190 215 245 280 320 360 395 475 570 700 785

115 145 185 210 240 270 305 350 380 460 550 665 750

120 155 200 225 255 290 330 375 410 495 590 720 810

80 100 130 165 185 215 240 275 310 340 410 490 595 665

84 105 140 180 200 230 260 295 335 365 440 525 640 715

105 135 170 195 220 250 280 320 350 420 500 605 675

115 145 185 210 235 270 305 345 375 450 535 650 730

ALUMINUM CONDUCTOR ² SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000 Notes:

76

CROSS SECTION (mm2)

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ONE CIRCUIT - FIGURE 6 2001 - 5000 Volts

TWO CIRCUITS - FIGURE 7

5001 - 35000 Volts

2001 - 5000 Volts

5001 - 35000 Volts

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

65 80 105 140 155 180 205 230 260 285 345 420 520 600

70 88 115 150 170 190 220 250 280 310 375 450 560 650

90 115 145 165 185 210 240 270 300 360 435 540 620

95 125 155 175 200 225 260 295 320 390 470 580 665

60 75 100 130 145 165 190 215 245 265 320 385 480 550

66 83 110 140 155 180 205 230 260 285 345 415 515 590

80 105 135 150 170 195 220 250 275 330 395 485 560

95 115 145 165 185 210 240 270 295 355 425 525 600

1. NEC Table 310-83. 2. NEC Table 310-84.


Ampacity (Amperes) Triplexed conductors Installation in direct buried. 20°C Ambient Temperature (Earth). 100% Load Factor. RHO 90. 90°C and 105°C Conductor Temperature. COPPER CONDUCTOR ¹ SIZE AWG / kcmil

CROSS SECTION (mm2)

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ONE CIRCUIT, THREE CONDUCTORS - FIGURE 8 2001 - 5000 Volts

5001 - 35000 Volts

TWO CIRCUITS , SIX CONDUCTORS- FIGURE 9 2001 - 5000 Volts

90°C

105°C

90°C

105°C

90°C

105°C

90 120 150 195 225 255 290 330 375 410 490 590 725 825

95 130 165 205 240 270 310 360 405 445 580 635 780 885

115 150 190 215 245 275 315 360 390 470 565 685 770

120 160 205 230 260 295 340 385 410 505 605 740 830

85 110 140 180 205 235 265 300 340 370 445 535 650 740

90 115 150 195 220 250 285 320 365 395 480 575 700 795

5001 - 35000 Volts 90°C

105 140 175 200 225 255 290 325 355 425 510 615 690

105°C

115 150 190 215 240 275 315 350 380 455 545 660 745

ALUMINUM CONDUCTOR ² SIZE AWG / kcmil

8 6 4 2 1 1/0 2/0 3/0 4/0 250 350 500 750 1000 Notes:

CROSS SECTION (mm2)

8.36 13.3 21.1 33.6 42.2 53.5 67.4 85.0 107 127 177 253 380 507

ONE CIRCUIT, THREE CONDUCTORS - FIGURE 8 2001 - 5000 Volts

5001 - 35000 Volts

TWO CIRCUITS , SIX CONDUCTORS- FIGURE 9 2001 - 5000 Volts

5001 - 35000 Volts

90°C

105°C

90°C

105°C

90°C

105°C

90°C

105°C

70 90 120 155 175 200 225 255 290 320 385 465 580 670

75 100 130 165 190 210 240 275 310 350 420 500 625 725

90 115 145 165 190 215 245 280 305 370 445 550 635

95 125 155 175 205 230 265 305 325 400 480 590 680

65 85 110 140 160 180 205 235 265 290 350 420 520 600

70 95 120 150 170 195 220 250 285 310 375 455 560 645

85 105 135 155 175 200 225 255 280 335 405 485 565

90 115 145 170 190 215 245 275 300 360 435 525 605

1. NEC Table 310-85. 2. NEC Table 310-86.

77


Installations Considered in Ampacities Tables

7.5”

FIGURE 1 Electrical duck bank, one electrical duct

7.5”

7.5”

FIGURE 2 Electrical duck bank (27”x11.5”), three electrical ducts

Electrical duck bank (27”x27”), three electrical ducts

7.5” 7.5” 7.5”

7.5”

7.5”

7.5” FIGURE 3 Electrical duck bank (19”x27”), three electrical ducts

78

Electrical duck bank (27”x19”), three electrical ducts


7.5”

7.5”

FIGURE 4 Buried single-conductor cables, one circuit

7.5”

7.5”

24”

7.5”

7.5”

FIGURE 5 Buried single-conductor cables, two circuits

24” FIGURE 6 Buried Three-conductor cable

FIGURE 7 Buried Three-conductor cables

24” FIGURE 8 Buried Triplexed cables, one circuit

FIGURE 9 Buried Triplexed cables, two circuits

Relleno (tierra u hormigón)

Conducto eléctrico

Tierra

Cable o cables

79


Ampacities at Ambient temperature different from the tables

Ampacities at Ambient temperature different from the Tables can be calculated by:

I2 = I1

TC - TA2 - •TD TC - TA1 - •TD

Where: I1 = Ampacity at Temperature Ambient TA1 (From Tables). I2 = Ampacity at Temperature Ambient TA2 (To be calculated). TC = Conductor temperature (°C). TA1 = Temperature Ambient from Tables. TA2 = Different Temperature Ambient. •TD = Dielectric loss temperature rise.

80


Short Circuit Currents for MV Cables Maximum acceptable short circuit current for MV Cables can be calculated by:

I=Ak

log

(

T2 + T1 + t

)

Where: I = Ampacity at Temperature Ambient TA1 (From Tables). A = Conductor Section in mm². K = 341 for copper, 224 for aluminum. T1 = Maximum Operation Temperature (90°C for conductor and 85°C for jacket). T2 = Maximum Acceptable Short Circuit Temperature (250°C for conductor and 200°C for shield). • = 234 for copper, 228 for aluminum. t = Short circuit duration in seconds.

81


Short Circuit Currents for Copper Conductor

1000 900 800 700 600

1 cycle (1/60 sec)

500 400

2 cycles (1/30 sec)

300

4 cycles (1/15 sec)

200

8 cycles (2/15 sec) 16 cycles (4/15 sec) 30 cycles (1/2 sec)

100 90 80

60 cycles (1 sec)

CURRENT (kA)

70 60

100 cycles (5/3 sec)

50 40 30

20

10 9 8 7 6 5 4 3

2

1 10

20

30

40

50

60

70 80 90

100

150

200

250 300 350 400

CONDUCTOR SECTION (mm2)

82

500 600

800

1000


Short Circuit Currents for Aluminum Conductor

1000 900 800 700 600 500 400

1 cycle (1/60 sec)

300

2 cycles (1/30 sec) 200

4 cycles (1/15 sec) 8 cycles (2/15 sec)

100

16 cycles (4/15 sec)

90

CURRENT (kA)

80 70

30 cycles (1/2 sec)

60 50

60 cycles (1 sec)

40

100 cycles (5/3 sec)

30

20

10 9 8 7 6 5 4 3

2

1 10

20

30

40

50

60

70 80 90

100

150

200

250 300 350 400

500 600

800

1000

CONDUCTOR SECTION (mm2)

83


Short Circuit Currents for Copper Shields

100.0 90 80 70 60 50 40

30

20

10.0 9

CURRENT (kA)

8 7 6 5

1 cycle (1/60 sec)

4

2 cycles (1/30 sec) 3

4 cycles (1/15 sec) 2

8 cycles (2/15 sec) 16 cycles (4/15 sec) 1.0

30 cycles (1/2 sec)

0.9 0.8 0.7

60 cycles (1 sec)

0.6 0.5

100 cycles (5/3 sec)

0.4 0.3

0.2

0.1 1

5

6

7

8 9

10

15

20

25

CONDUCTOR SECTION (mm2)

84

30 35 40

50

60 70 80 90

100


Medium Voltage Cables Designs Single Conductors, Copper Tape Shield.

Soft copper or aluminum 1350 H19 compacted conductor XLPE Conductor shield XLPE Insulation XLPE Insulation shield Metallic Shield. Copper tape Flame retardant polyvinyl chloride PVC Jacket

Single Conductors, Copper Wires Shield.

Soft copper or aluminum 1350 H19 Compacted Conductor XLPE Conductor shield XLPE Insulation XLPE Insulation shield Metallic Shield. Copper Wires Flame retardant polyvinyl chloride PVC Jacket

85


Three Conductors, Copper Tape Shield.

Soft copper or aluminum 1350 - H19 compacted conductor XLPE Conductor shield XLPE Insulation XLPE Insulation shield Metallic Shield. Copper tape Flame retardant polyvinyl chloride PVC Filler Flame retardant polyvinyl chloride PVC Jacket

Triplexed Conductors, Copper Tape Shield.

Soft copper or aluminum 1350 - H19 compacted conductor XLPE Conductor shield XLPE Insulation XLPE Insulation shield Metallic Shield. Copper tape Flame retardant polyvinyl chloride PVC Jacket

86


Single Conductors, 33% Concentric Neutral

Soft copper or aluminum 1350 - H19 compacted conductor XLPE Conductor shield XLPE Insulation XLPE Insulation shield 33% Concentric neutral, copper wires Flame retardant polyvinyl chloride PVC jacket

Single Conductors, 100% Concentric Neutral

Soft copper or aluminum 1350 - H19 compacted conductor XLPE Conductor shield XLPE Insulation XLPE Insulation shield 100% Concentric neutral, copper wires Flame retardant polyvinyl chloride PVC jacket

87


Cables for Treed Areas

Compressed ACSR Blocking Compound against moisture Blocking Tape against moisture XLPE Conductor shield XLPE covering, inner layer XLPE Track resistant covering, outer layer

88


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.