Page 1

AbAcus EnginEEring http://abacusengg.com Manufacturer of Heat Exchanger Air Receivers Pressure vessel Air Dryer By Abacus Engineering


About US A

http://abacusengg.com

bacus is the leader in design and manufacture of Heat Transfer Equipments and Industrial Chilling Equipments. We have the services for Thermal Designing, Mechanical Designing, Fabrication, Drawings, Site Installation Designing facilities We have fully equipped Design Department capable of doing thermal and mechanical designs of all offered equipment in house and thereafter generating fabrication drawings of the same. The designing is done as per various design codes viz. IS,ASME,TEMA,API,ASHRAE, BS etc. We have extensive computer hardware and software to facilitate our designing as well as other areas of concern within the organization. Strength In house Detailed Engineering for all manufactured items, i.e. Process(Thermal) Design, Mechanical Design and Fabrication Drawings, fully utilizing the modern tools of Computer Aided Designing is where the real strength of Abacus lies.


PRODUCTS  Tube Heat Exchangers

Air / Gas Chilling Units

 Air Cooled Heat Exchanger

Brine / Glycol Chillers

 Inter / After / Oil Coolers

Air Dryers

 U' & Straight Tube Bundles

Air Conditioning Equipments

 Pressure Vessels

Water / Air Cooled Condensers

DX / Flooded Chillers

Refrigeration Equipments

Heating Units / Equipments

Air Cooling & Ventilation Systems

 Air Receivers

Oil Chilling Unit

 Hot Water Generators

Co2 Liquefiers

 De-Super Heaters / Pre Heaters

Walk-In Cold Rooms up to (-)40oC

 Water Cooled Chillers

Air Cooled Chillers

 Columns  Reactors  Process Condensers  Chemical Storage Vessels  Clarifiers / Economizers


Material

M ajor

http://abacusengg.com

raw material is in the form of plates, pipes and tubes.

to is, ASME etc. viz. SA 515 / 516Gr 60 / 70, SA 105, SA 266 GR 2, IS 2002-2, IS 2062 GR A, SA 210,SA 179, SA 106B, SA 333 GR 6 etc. shell thickness up to 50 MM, tubes sheets up to 150 MM and tubes up to 2.5" OD. Stainless steels used is confirming to SA 240, SA 213, SA 312, SA182 Grades 304, 304L, 316, 316L, 316TI, 321, 347, duplex SA 2205etc. shell thickness up to 40 MM, tubes sheets up to 150 MM and tubes up to 2.5" OD. Lots of other non ferrous materials also form part of regular production such as, Copper, Brass, Naval Brass, Admiralty Brass, Phosphorous Bronze, Al. Bronze, Cupronickel, Titanium, Monel, Inconel, Has alloy etc. in all grades shell thickness up to 40 mm, tubes sheets up to 150 mm and tubes up to 2.5" OD. Carbon Steels used is confirming


After Market Services of Abacus Engg Brine / Glycol ChillersÂ

a) Site inspections and Evaluations. b) Replacement of Adsorbents (Alumina and Silica Gel) c) Retrofits, retubing, revamping and upgrades. d ) Replacement parts and instrumentations. e ) Replacement tube bundle & coolers.


Our contact REGD. OFFICE D-15/4, Okhla Indl. Area, Phase - II, New Delhi - 110020 (India) Telephone :( +91 - 11 ) - 98100 07843 Fax :( +91 - 11 ) - 26384115 ,  E-mail :mail@abacusengg.com Web Address :www.abacusengg.com

Manufacturer of Heat Exchanger Air Receivers Pressure vessel Air Dryer Abacus engg  

Abacus Heat Transfer Pvt. Ltd @ Designer , Manufcaturer and supplier of Heat Exchanger,Air Receivers , Pressure vessel , Air Dryer in India...

Read more
Read more
Similar to
Popular now
Just for you