Nesibe Kaya Industrial Design Portfolio
The content and materials in this booklet are designed by Nesibe Kaya. All rights reserved.No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronical, mechanical protocopying, recording or otherwise, without the written permission of Nesibe Kaya.
Selvinaz Nesibe Kaya Industrial Designer email@example.com +90 506 780 03 65 www.issuu.com/nesibekaya4 id.nesibe
Istanbul Technical University Master of Industrial Design 2013-18 Middle East Technical University Bachelor of Industrial Design, 3,38 CGPA 2009-13 Gรถlbasi Anadolu Lisesi Mathematic and Science Department, Ankara/Turkey
Research Idea Generation Product Sketch & Illustration 3D modeling Storyboarding Color Theory Prototyping
Clay Modeling in the Automotive Industry Workshop
Arcelik, Project Staff, 3 months Kraf&Co Design Office Office Internship, 6 weeks, Ankara/Turkey Zirve Plastik Kalip Manufacturing Internship, 4 weeks,
Languages Turkish /Native English /Upper Italian /Beginner
Software Skills Rhinoceros 3D Adobe Illustrator Adobe Photoshop Adobe After Effects Keyshot Office Applications
UTAK 2016 Open Design Workshop: Kitchen Practices Experience Mapping Workshop Simulation and Character Workshop Digital Product Design Workshop Future Spheres Workshop Yasamarti Personal Development Seminar Proactive Leadership with Sporty Approach Communication of the Future Diction& Speech Aesthetics Desitnation Management at Difficult Conditions Physicological Momentum in Work and Life Balance Game Design Workshop Basic Design Workshop
Autonomous Electrical Apron Bus Provides different and comfortable travelling experiences for all kinds of passengers
Team members Oguz Boz Nida Ari Ă–zge Kayaaslan
large windows, spacious environment
Apron bus that responds to
personal space requirements of passengers
information needs of passengers about their flight.
making this short ride memorable
designing eco-friendly bus
Ideation Concepts that meet passenger needs such as providing information and personal space have been developed.
Mock-ups Sitting, standing, holding, leaning options and product form were studied.
Finalization Characteristic lines, interior design and comfortable travel provided make for an unusual and memorable design.
The side surface lighting, which provides information about the direction of the bus and increases nighttime visibility, follows the line of windows and makes it remarkable.
Mock-ups Design concept was ergonomically developed with models and scaled drawings and the grip height was adjusted to meet the needs of each user.
Charging unit at the top for more security
Doubled paneled coach doors
Large windows were preferred to provide a spacious atmosphere inside. OTOKAR logo and headlights
Rotating covers of wheels
9 Interior lighting
Hangers for personal belongings
Handrail for different heights
b h e
Rugged surface for luggage
f.Low density silicone
Technical Details a b c
d e f g h i
leaning : 8
standing : 85
r s t v m n o
a. charging cover, aluminium b. charging unit c. air conditon d. batteries e. main body, aluminium f. cameras g. alert light h. lidar i. side headlight j. structure, 40-60 mm steel
k. headlight cover l. headlight m. signals n. inner floor, rubber o. bottom sheet p. chasis, 60 mm steel r. exterior lighting s. base lighting t. hub motors v. wheel
At the end of the flight passengers are met by the atonomous They can see the weather and flight information on the bus, Voyage. outdoor display of the bus.
Handrail can be held by many passengers with itâ€™s rotational design.
Passengers travel safely by holding handles hanging from the handrails. Handles are durable and ergonomically designed.
Handrail supports the hygiene of passengers and provides hangers for bags during the ride.
Passengers can place their luggage to specialized surface under handrails.
They get on the bus through the doors that are wide Seats are positioned conveniently close to doors, seated passengers place luggage under seats enough for large groups.
Passengers lean to assigned surfaces, place their luggages behind where they lean.
Information screen provide passengers what they need o know about; destinationcity, flight, transfer info and such.
Voyage offers passengers handrails with different height options and passengers can place their luggage to specialized surfaces under handrails.
Getting off the Voyage after reaching the airport gates.
Home Based e-Health Device for Elderly Offers opportunity to be treated with clinical pilates under physiotherapist supervision at homes of elderly patients who has physical illnesses such as osteoporosis, scoliosis and hernia. .
Physiotherapist should observe and demonstrate the exercise.
Physical diseases, treatment methods and habits of the user group and life style were investigated.
Pulse, oxygen saturation and blood pressure should be measured and values should be monitored during exercise by a professional.
Ability of elderly people should be considered. Users should be motivated to make exercise regularly.
It was observed that the patients had difficulty in exercising regularly, monitoring their medications, and frequently having access to the hospital.
Idea Generation A product was developed to provide elderly patients clinical pilates in their homes to help treat physical diseases such as hernia and osteoporosis.
Touchtone screen hard to use for elderly
Foldable base of touch operated screen
Wearable measuring device covers hand
Wristband like measuring device
Product Development The product form was designed to provide ease of use for senior and to support the function..
Wearable device that measures the values of the patient during exercise
Screen and camera enabling the patient and physiotherapist to do pilates with live broadcast
Angle and height adjustable base for following exercises
Styrofoam and cardboard final model
Since it was decided to use television for viewing, the screen of the product was shrunk. The wearable measuring instrument was turned into a wristband. The base, which was designed as a charging station at the same time as the wrist strap and the display, was revised.
Usage Scenario 11:30 115 11,8 98%
110 12,9 96%
2t monitors pill times, walking times, exercise schedules and reminds them.
11:25 5 min left to exercise
3 hours left to pills
110 12,9 96%
11:35 110 12,9 96%
115 11,8 98%
110 10,7 95%
105 12,7 99%
115 11,8 98%
110 10,7 95%
110 10,7 95%
105 12,7 99%
105 12,7 99%
The physiotherapist manages the exercise, observes the group members.
5 hours left to walking
Physiotherapy center staff teaches to use 2t to elderly patient.
The patient does clinical pilates at home via live broadcast. During the exercise her values are measured by wristband and tracked by the physiotherapist.
The patient can communicate with other users to walk together
Phases of Wristband
When measured values indicate a problem
Folded for storage Feedback on progress during exercise and walking
Rotating and height adjustable base
Technical Details Rotating camera
Rotates vertically to follow movements
Measures pulse, blood pressure, oxygen saturation and steps
Battery and reminder lights
Touch operated portable screen Aluminosilicate glass
Screen Feedback for measurements
Elastic bands Textile
Charging unit of screen
Rotating base Rotates horizontally to follow patient during exercise ABS
Magnetic charger of wristband
Height adjustable platform ABS and Aluminium
Electric Oven Sous Chef makes it possible to divide cooking process into several phases without physical effort thanks to its moving trays.
Team members Eniscan Bubik Irem Mert Irmak Cakan
Research & Ideation
Interviews with oven users and observation during preparing and cooking time was maden.
Taking out the tray
Removing empty trays from the oven
Putting tray to benchtop Checking
Sketches & Mock-ups
Problems with storage of extra trays, adjustment of baking time, change of setting, opening of lid when checking were observed.
The baking process, the duration, the position of the tray, the baking mode and the grade were divided into adjustable sections and baking models with a compartment inside were studied to store the trays.
Takes out the tray for preparing
Chooses moving tray and starts pre-heating.
Puts dough when pre-heating is done.
Light increases and tray moves to middle when checking
Takes out hotpads when meal is ready
Attaches hotpads to the tray and picks it up
Slides the tray
Detaches extra racks
Detaches ball screw
Puts the tray on a surface by folding hotpads under it
Pours some water to fill the sligt cavity at the bottom
Uses steam to clean and wipes with a towel
Changeable tray height thanks to ball screw mechanism Interface during cooking 9:45
Scanned by CamScanner
Cooking Pre-Heat Turbo
Gives opportunity to divide cooking time into phases. Different settings can be made to each phase. Sous Chef is suitable for local dishes like yoghurt and bread.
Handle turns into hot pad CamScanner
Storage unit saves space
Technical Drawing a
a. Tray/Enamel b. Inner cassette/Enamel c. Heater/Stainless Steel d. Interface/Glass e. Hatch/Enamel f. Racks/Aluminum g. Mechanism/Stainless Steel h Handle/Steel
Team members Sena Bozkurt Hakan TĂźrkaslan Elif Balkas
Sink for Primary School Designed to be placed in primary schools, the basin makes a difference by providing different settlement possibilities and encouraging children to cleanliness.
Observation Observation and research on children's experiences during hand washing and brushing teeth was done.
Brushing teeth and washing hands routines were observed.
Needs, requests and product form were worked on with user goup.
Adaptable design to different environments Giving children hand washing and toothbrushing habit Providing and maintaining a hygienic environment
PAPER TOWEL DISPENSER and
TOOTH BRUSHING K SOAP DISPENS
A model TRASH consisting of modular parts was selected and developed.
SOAP DISPENSER WITH SPIRAL
Ideation Modeling was done for the first ideas. Designs that enhance children's interaction were studied.
The first models were inspected by the children. The design was revised in the direction of observations and interpretations.
Soap dispencer that fixed on the sink gives feedback on the amount of soap that the user should use by changing the light.
The wash basins, which can be placed in the middle of the school toilet to allow them to see each other while washing their hands, also offer different layout options.
The product family, designed with ease of use and sorting, also facilitates experiences such as repairs and installation.
In the last stage of the design process, ceramic models were made by shaping the mud.
Between the two washbasins there is a connecting element which holds the garbage, tissue and toothbrush kit.
Layout Binary Placement The sinks can be placed in the middle in pairs.
Triple Placement Three sinks can be combined by connecting two intermediate elements to each sink.
The number and arrangement of sinks can be adjusted according to the structure and the needs of the school toilet.
Running Shoe The surface of the shoe is swollen by the pressure created during running and covers the foot. It provides a comfortable and healthy running experience.
Finalization Perf-fit perfectly matches the foot. The impact on the ball during running provides air pumping on the top of the shoe and foot wrapping of the shoe.
Scanned by CamScanner
As a result of the research and interviews the running shoe had a tight grip and a personalized base. Then the process continued with form development.
Scanned by CamScanner
Scanned by CamScanner
Scanned by Ca
The upper part maden of microfibre mesh. It is breathable and flexible.
The air-sole in the EVA midsole provides shock absorption and cushioning while also pumping air through the upper channels by taking advantage of the effect created during running.
After running the Perf-fit is easily restored by pressing the button on the side for air release.
The plastic structure on the shoe is swollen due to the impact on the air cushion on the heel when the run begins. It provides perfect fit. The covering layer protects it from ultraviolet rays and external factors and extends the life of the product. Layers are glued together by hyperfuse method.
Insoles are produced from EVA in the CNC machines as appropriate for each customers as a result of tests and measurements.
Blown rubber outsole is durable and flexible. The pressure control valve stops pumping air when the upper part is sufficiently swelled as running continues
One way air intake
Time Management Assistant Uses therapeutic effect of sun light for planing and motivation.
DEPARTMENT OF INDUSTRIAL DESIGN
Mind Mapping The usage area of the product was determined as the regulation of the preparation period to wake up and to leave the house in the morning.
summer sea-blue plants-green sun-yellow
autumn leaf-yellow tree-brown leaf-orange
snow-white forest-green ice-light blue sky-blue sky-grey flowers-colorful
growing ripe getting old
Sunlight is the main therapeutic factor in the nature's laboratory.
organize the life
wake up/ do something/ go somewhere
Form Studies Inspired by the form of clock and sun,
Divided for timing of activities
timing hours, days, weeks, months, seasons, years
Inclined for visibility both for people in bed and standing
Time Management After the user wakes up, the morning routine is divided into parts that are color-coded to help user use the time effectively.
According to the associations of colors, experiences are matched to colors to take place on charts. For example, the day care period is represented by a light blue color that is matched with hygiene.
Exterior Seating Unit The glass surface and design make this garden furniture aesthetic, easy to clean, durable and harmonious to nature.
Team members Oguz Boz Nida Ari
Research According to interviews and observations, the problem of evacuating the garbage bin and the importance of the durability have been identified. Structure and details of current models are analyzed
Ideation Structural studies were carried out. The samples were evaluated for durability and ergonomics.
The trash box design was studied on the basis of the usage scenario. Sketches and models were made to study the structure supporting elements and form.
Changing the bag in the trash can
Storing the seatings under the table
Tempered Glass Lattice Carrier Legs Compression Element Tension Element
Steel door with led light The Moon door model aims to reduce user problems and provide ease of use. Modern and elegant design makes it desirable.
Ideation Sketches and models were made on the ridges of the door, the handle, the lock shapes and the functional features of the door.
Inspiration The focus was on facilitating the use of the door in the dark during product design. Inspired by moonlight.
The logo of the model comes from the pattern created by the lines on the product
The lighting around the inner handle and the keyhole guides user when the environment is dark.
Hot Melt Gun Conveniently designed for hobby use, the hot melt gun provides a comfortable experience for the user with easy handling and ergonomic grip.
Details The inner part of the silicon gun is designed for use easily. The mechanism that pushes the silicone forward is placed above the gun and attached to a button.
Pushing mechanism Button Silicon cover Heater
The shape of the grip and the form of the silicone gun allows user to hold the product to be attached close. It makes detailed work easier.
Scale:1/2 Unit mm
Bazaar Stand Designed to be easily installed and disassembled in a short time and to protect the user and products from adverse weather conditions.
The stand consists of 4 feet, 3 structural intermediate elements and tent. These parts are made of pine wood and metal fittings.
The structure consisting of similar parts can be set up by a few people in a short time and stored in a small area.
This 3 meter high stand was designed to be installed and removed by 2 people in 5 minutes.
The legs of one side are constructed.
The connection element is attached.
Other side is completed.
Tent is attached.
Details Metal fasteners provide easy assembling. It is durable and protects the wooden structure.
Market table with strong structure due to steel fasteners and supporting intermediate elements
Scanned by CamScanner
Nesibe Kaya firstname.lastname@example.org +90 506 780 03 65