Engine Engine Removal 1. Park machine on a level surface, lower cutting units, stop engine, engage parking brake, and remove key from the ignition switch. 2. Pivot seat up. Lift front canopy and remove from the brackets (Fig. 19).
1 2
Figure 19 1. Canopy
5
2
11
4
Kubota Diesel Engine
3. Disconnect and remove battery from the machine (see Battery Service in Chapter 5 − Electrical Systems).
2. Brackets
10
CAUTION
6
If engine is hot, pressurized coolant can escape and cause burns when the radiator hoses are removed. The radiator and exhaust exhaust tube may be hot. Avoid possible burns; allow engine, radiator, and exhaust system to cool before removing radiator hoses or exhaust tube. 4. Drain radiator. Disconnect both hoses from the radiator (Fig. 20). 5. Remove air hose from air intake manifold (Fig. 20). 6. Remove exhaust shield from the engine (Fig. 20).
12 8
9 1 3
7 Figure 20
1. 2. 3. 4. 5. 6.
Battery Upper radiator hose Lower radiator hose Fan guard Fan shroud Exhaust shield
7. 8. 9. 10. 11. 12.
Starter OIl pressure switch Alternator Air hose Hi temp. warning switch Hi temp. cutout switch
7. Remove fan guard and fan shroud from the radiator (Fig. 20). 1
8. Remove fan from the fan pulley. Remove fan shroud and fan from machine (Fig. 21). Remove fan shroud from the machine.
2 3
Figure 21 1. Fan 2. Fan pulley
Reelmaster 4000−D
Page 3 − 13
3. Cap screws
Kubota Diesel Engine