Page 1

CATALOG 2013

PIPE HANGERS & SUPPORTS

The Complete Line of Pipe Hangers and Accessories 200 CAMPUS DRIVE, R.R. 30 8411 OLD MARLBORO PIKE MOUNT HOLLY, NEW JERSEY 08060 UPPER MARLBORO, MARYLAND 20772 (609) 261-5353 (301) 568-8805 FAX: (609) 261-3249

FAX: (301) 967-1456

WWW.NATIONALPIPEHANGER.COM


INTRODUCTION

National presents our new catalog containing a complete and versatile line of pipe hangers and related products, which have been selected to effectively answer support problems in the commercial and industrial piping fields. This selection results from more than thirty years of concentrated and direct exposure to the field problems of the piping contractor. This is where needs are discovered, where products and services are genuinely tested, and in this area our experiences are unequalled. A constant awareness of our customers’ efforts and problems was no less important than the development of our manufacturing skills in the emergence of National as a manufacturer in the pipe support field. All National products are carefully manufactured to meet the highest standards in the industry. Our people are equipped to respond quickly to your product and service needs on both standard items and specialized fabrication. Many of our products meet and exceed Manufacturer’s Standardization Society (MSS-SP-58), Factory Mutual Listings (FM), Underwriters Laboratory Listings (UL), and Federal Specifications (WW-H-171). National is a member of the Manufacturer’s Standardization Society.

1


PICTORIAL INDEX 08

08

09

09

10

SPLIT RING EXTENSION HANGER

HANGER FLANGE

ADJ. SWIVEL RING HANGER

ADJ. BAND HANGER

FIG. 100

FIG. 105

FIG. 110

FIG. 115

10

11

ONE HOLE PIPE STRAP

SHORT CLIP

FIG. 125

13

11

RETURN LINE STRAIGHT J-HOOK

FIG. 145

FIG. 136

14

FIG. 120

12

PERFORATED HANGER STRAPPING

HOLD DOWN STRAP

FIG. 135

13

12

TWO HOLE PIPE STRAP

15

FIG. 150

16

RETURN LINE OFFSET J-HOOK

WALL PIPE SUPPORT

STANDARD U-BOLT

ADJ. CLEVIS HANGER

PVC COATED CLEVIS HANGER

FIG. 155

FIG. 160

FIG. 165

FIG. 200

FIG. 200V

16

17

FLAT TOP CLEVIS HANGER

CLEVIS HANGER WITH EXTENDED BOTTOM

FIG. 205

19

17

ADJ. CLEVIS FOR CAST IRON PIPE

FIG. 210

19

18

CLEVIS HANGER WITH WELDED SHIELD

FIG. 215

20

18

FIG. 220

20

PLASTIC PIPE CHANNEL

LIGHT DUTY ADJ. CLEVIS HANGER

ROLLER CHAIR

FIG. 230

FIG. 235

FIG. 240

FIG. 245

22

22

FIG. 225

21

PLASTIC PIPE HANGER

21

CLEVIS HANGER WITH PROTECTION SADDLE

23

PIPE ROLLER STAND FIG. 248

24

ADJ. PIPE ROLLER STAND

ADJ. ROLLER HANGER

ADJ. TWO ROD ROLLER HANGER

PIPE COVERING PROTECTION SHIELD

MSS PIPE COVERING PROTECTION SHIELD

FIG. 249

FIG. 250

FIG. 260

FIG. 300

FIG. 307

2


PICTORIAL INDEX 25-27

27

28

28

29

PIPE COVERING PROTECTION SADDLE

STANDARD STEEL PIPE CLAMP

HEAVY DUTY RISER CLAMP

HEAVY TWO BOLT PIPE CLAMP

FIG. 310-340

FIG. 400

FIG. 404

FIG. 405

29

30

30

31

RISER CLAMP

MULTIPLE RISER CLAMP

OFFSET PIPE CLAMP

FIG. 415

FIG. 420

FIG. 425

FIG. 430

32

32

FIG. 410

31

HEAVY DUTY DOUBLE BOLT PIPE CLAMP

32

DOUBLE BOLT PIPE CLAMP

33

EXTENDED PIPE CLAMP FIG. 435

33

FOUR SECTION RODDING BAND

SOCKET CLAMP

WASHER

FOUR BOLT SOCKET CLAMP

CORP. EYE BOLT

FIG. 440

FIG. 450

FIG. 455

FIG. 460

FIG. 470

34

35

PIPE GUIDE

LIGHT DUTY PIPE GUIDE

FIG. 500

37

36

PIPE SADDLE SUPPORT

PIPE SADDLE SUPPORT

40

FIG. 520

39

ADJ. PIPE SADDLE SUPPORT

FIG. 530

41

PIPE SADDLE SUPPORT WITH U-BOLT

FIG. 516

39

ADJ. PIPE SADDLE SUPPORT WITH COUPLING

FIG. 525

FIG. 521

40

FIG. 515

38

37

ADJ. PIPE SUPPORT WITH U-BOLT

ADJ. PIPE SUPPORT

FIG. 502

38

36

ADJ. PIPE SADDLE SUPPORT WITH U-BOLT

FIG. 535

41

FIG. 538

42

ANGLE IRON SUPPORT

CHANNEL ASSEMBLY

ANGLE BRACKET

METAL DECK ANCHOR BOLT

OVERHEAD ANCHOR BOLT

FIG. 540

FIG. 545

FIG. 550

FIG. 555

FIG. 560

3


PICTORIAL INDEX 42

42

43

43

43

FEMALE OVERHEAD ANCHOR BOLT

ANCHOR BOLT

CONCRETE INSERT BOX

CONCRETE INSERT NUT

FIG. 561

FIG. 565

FIG. 600

FIG. 605

43

43

45

46

C-CLAMP RETAINING STRAP

JR. TOP BEAM CLAMP

TOP BEAM CLAMP

FIG. 615

FIG. 620

FIG. 635

FIG. 640

47

47

48

CONCRETE ROD ATTACHMENT PLATE

CONCRETE CLEVIS PLATE

SIDE BEAM CONNECTOR

FIG. 650

FIG. 646

FIG. 647

FIG. 655

49

49

50

SIDE BEAM CLAMP

STEEL BEAM CLAMP

BEAM CLAMP

FIG. 665

FIG. 670

FIG. 675

FIG. 680

51

MALLEABLE BEAM CLAMP WITH EXTENSION PIECE

BEAM CLAMP ASSEMBLY

53

52

LIGHT WELDED BRACKET

FIG. 695

FIG. 690

53

51

TOP BEAM HOOK FIG. 660

MALLEABLE BEAM CLAMP FIG. 685

52

MEDIUM WELDED STEEL BRACKET

FIG. 700

53

FIG. 645

50

ADJ. ROD BEAM CLAMP

50

WELDING BEAM ATTACHMENT

48

WELDING BEAM ATTACHMENT WITH BOLT & NUT

48

FIG. 610

46

C-CLAMP WITH LOCKNUT

46

C-CLAMP

HEAVY WELDED STEEL BRACKET

FIG. 705

54

FIG. 710

54

LIGHT WELDED STEEL BRACKET

LIGHT WELDED STEEL BRACKET SIDE CLIP

TURNBUCKLE

FORGED STEEL CLEVIS

WELDLESS EYE NUT

FIG. 715

FIG. 720

FIG. 730

FIG. 735

FIG. 740

4


PICTORIAL INDEX 55

55

56

56

57

PLAIN EYE ROD

WELDED EYE ROD

CONTINUOUS THREADED ROD

HANGER ROD

FIG. 745

FIG. 750

FIG. 755

FIG. 760

57

57

58

58

REDUCING ROD COUPLING

HEX HEAD MACHINE BOLTS

HEX NUTS

FIG. 770

FIG. 775

FIG. 780

FIG. 785

59

59

FIG. 765

58

ROD COUPLING

59

COACH SCREW ROD

60

HEAVY DUTY HEX NUTS FIG. 790

60

ROUND STEEL WASHERS

LOCK WASHER

STEEL WASHER PLATE

FENDER WASHER

DRIVE SCREW

FIG. 795

FIG. 800

FIG. 805

FIG. 810

FIG. 815

60

61

61

61

62

HEX LAG SCREW

PIPE SLEEVE WITH WELDED LUGS

NAILING SLEEVE

WATERPROOF SLEEVE

FIG. 820

FIG. 830

FIG. 835

FIG. 840

62

62

SLEEVE ANCHOR WITH COUPLING

64

FIG. 860

63

SPRING WING TOGGLE HEAD ONLY

SPRING WING TOGGLE WITH BOLT

FIG. 875

FIG. 867

64

63

DROP-IN ANCHOR

SLEEVE ANCHOR

FIG. 865

64

63

WEDGE ANCHOR

FIG. 885

FIG. 880

65

66

NEOPRENE-IN-SHEAR HANGER

SPRING HANGER

NEOPRENE-IN-SHEAR AND SPRING HANGER

PTFE PIPE SLIDE

SLIDE PLATES

FIG. 900

FIG. 901

FIG. 902

FIG. 950

FIG. 960

5


PICTORIAL INDEX

COPPER TUBING HANGERS 67

67

68

68

69

SPLIT RING EXTENSION HANGER

HANGER FLANGE

ADJ. SWIVEL RING HANGER

ADJ. BAND HANGER

TWO HOLE PIPE STRAP

FIG. CT100

FIG. CT105

FIG. CT110

FIG. CT115

FIG. CT120

70

69

70

ONE HOLE PIPE STRAP

WIRE PIPE HOOK

PERFORATED HANGER STRAPPING

ADJ. CLEVIS HANGER

RISER CLAMP

FIG. CT125

FIG. CT140

FIG. CT145

FIG. CT200

FIG. CT420

STRUT & ACCESSORIES 71

71

CONTINUOUS SLOTTED INSERT

STRUT

71

INSERT NUT WITH SPRING

71

INSERT NUT WITHOUT SPRING

STRUT PIPE CLAMP

PRE INSULATED SLIDES & GUIDES For a more detailed look at National Pipe Hanger Corporation’s Pre-Insulated Pipe Supports, please refer to the Pre-Insulated Pipe Supports catalog that contains our complete line of PreInsulated Pipe Supports.

FIG. NS10

FIG. NS20

FIG. NS50

6

FIG. NS60


PICTORIAL INDEX

PRE INSULATED SLIDES & GUIDES

FIG. NG30

FIG. NG40

FIG. NG70

FIG. NG80

FIG. NC10

FIG. NC30 - NC33

FIG. NH40

FIG. NH60

FIG. NR10

FIG. NR20

FIG. NC70

FIG. NC80

FIG. NA40

PRO-SHIELD

CHILL-SHIELD

MAXSPAN

PRO-SHIELD N.T.

QUIK-SHIELD

MAXSPAN R.H.

7


FIG. 100

SPLIT RING EXTENSION HANGER MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS: PIPE SIZE

A

Malleable iron or stainless steel. Black or electro-galvanized. For suspension of non-insulated stationary pipe lines. Specify pipe size, figure number and finish. MSS SP-58 TYPE 12 FS WW-H-171E TYPE 25

B

C

D

WEIGHT PER MAX REC. 100, LBS. LOAD, LBS.

11 /8* 3/8 /16 113/16 113/16 8.4 180 3 3 /2 /8 /4 21/8 13/16 9.8 180 3 3 7 /4 /8 /8 21/2 19/16 11.2 180 3 1 3 1 /8 1 /8 2 /4 2 14.7 180 11/4 3/8 15/16 33/16 23/8 18.1 180 11/2 3/8 17/16 33/8 25/8 21.4 180 3 2 /8 15/8 315/16 31/16 30 180 21/2* 1/2 21/8 53/16 313/16 58.3 300 1 3* /2 21/2 511/16 45/8 71.3 300 1 4* /2 27/8 63/4 59/16 101.9 300 3 1 *Sizes /8”, 2 /2”, 3” and 4” are hinged style only *Stainless steel are the non-hinged style 3

1

FIG. 105

HANGER FLANGE MATERIAL: FINISH: SERVICE: ORDERING:

Malleable iron or stainless steel. Black or electro-galvanized. For attaching hanger rod to wood beams, ceilings, walls or floors. Specify rod size, figure number and finish.

ROD SIZE “A”

B

C

/8 - 16 /2 - 13

13/8 13/8

23/4 23/4

3 1

8

D

E

/16 /16

111/16 111/16

7 7

SCREW SIZE WEIGHT PER “F” 100, LBS.

#12 #12

18 18


ADJUSTABLE SWIVEL RING HANGER, STD. & NFPA

FIG. 110 MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

Carbon steel. Electro-galvanized. For suspension of non-insulated stationary pipe lines and conduit. Approved for use without additional locking nuts normally required with pipe hangers. Specify pipe size and figure number. MSS SP-58 TYPE 10 FM (3/4” - 4”) UL (3/4” - 2”) FS WW-H-171E TYPE 10

PIPE SIZE

A

B

C

D

E

MATERIAL SIZE

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8

21/4 21/16 2 2 17/8 21/8 21/2 27/8 3 23/4 31/4 33/4 41/2

/8 /8 7 /8 7 /8 7 /8 7 /8 11/8 11/8 11/8 11/8 11/8 11/2 11/2

11/2 11/4 11/8 11/8 11/8 11/4 13/8 27/8 13/4 13/4 17/8 21/2 31/8

25/8 21/2 25/8 23/4 27/8 31/4 33/4 41/2 5 5 6 71/4 87/8

33/16 33/16 33/8 33/4 4 45/8 55/8 61/4 7 73/8 91/8 105/8 131/8

16ga x 5/8 16ga x 5/8 16ga x 5/8 16ga x 5/8 16ga x 5/8 16ga x 5/8 13ga x 3/4 13ga x 3/4 13ga x 3/4 11ga x 1 11ga x 1 11ga x 1 11ga x 1

1 3

7 7

ORDERING: APPROVALS: PIPE SIZE

/8 /2 3 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8

/8 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2 5 /8 5 /8 3 /4 3 /4

/8 /8 3 /8 3 /8 3 /8 3 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2

3

3

3

3

.11 .11 .12 .13 .14 .15 .32 .34 .37 .78 .94 1.20 1.45

B

C

E

F

MATERIAL SIZE

WEIGHT EACH, LBS.

MAX. REC. LOAD LBS.

/8 /8 3 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2 1 /2 1 /2 3 /4 3 /4

25/16 23/16 21/16 21/16 29/16 23/4 3 37/16 41/4 41/8 41/2 5 611/16 79/16

25/8 25/8 25/8 211/16 37/16 311/16 43/16 47/8 6 61/8 63/4 73/4 10 117/8

19/16 17/16 15/16 15/16 113/16 2 21/4 27/16 31/4 31/8 31/4 43/4 53/16 613/16

13/8 11/4 1 15/16 11/4 13/16 13/16 11/4 15/8 13/8 13/8 11/4 21/8 2

16ga x7/8 16ga x7/8 16ga x7/8 16ga x7/8 16ga x7/8 16ga x7/8 16ga x7/8 14ga x 1 13ga x 1 13ga x 1 11ga x 1 11ga x 1 11ga x 11/2 11ga x 11/2

.11 .11 .12 .12 .14 .16 .23 .28 .41 .44 .87 1.0 1.6 2.6

610 610 610 610 610 610 610 970 970 970 1250 1250 1600 1800

3

1

3

400 400 600 600 600 600 600 600 600 1250 1250 1250 1250

Carbon steel. Black or electro-galvanized. For suspension of non-insulated stationary pipe lines and conduit. Specify pipe size, figure number and finish. MSS SP-58 TYPE 7 FS WW-H-171E TYPE 7

A

3

MAX. REC. LOAD, LBS.

ADJUSTABLE BAND HANGER

FIG. 115 MATERIAL: FINISH: SERVICE:

ROD NFPA WEIGHT SIZE ROD SIZE EACH, LBS.

9


FIG. 120

TWO HOLE PIPE STRAP MATERIAL: FINISH: SERVICE:

Pre-galvanized carbon steel. Pre-galvanized. For light duty support of schedule 40/80 sized pipe. Attaches directly to horizontal or vertical member. Specify pipe size and figure number.

ORDERING: PIPE SIZE

PIPE OD

A

B

C

MATERIAL SIZE

WEIGHT EACH, LBS.

/4 /8 1 /2 3 /4 1 11/4 11/2 2 21/2 3 4

0.540 0.675 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500

/32 /32 7 /32 7 /32 9 /32 9 /32 9 /32 9 /32 11 /32 11 /32 11 /32

21/8 21/4 25/8 23/4 33/8 41/4 43/8 5 61/4 71/4 83/8

11/4 11/2 17/8 2 25/8 31/4 33/8 4 43/4 53/4 67/8

22ga x 3/4 22ga x 3/4 18ga x 3/4 18ga x 3/4 16ga x 1 16ga x 1 15ga x 1 14ga x 1 12ga x 1 12ga x 1 12ga x 1

0.01 0.03 0.04 0.07 0.09 0.10 0.13 0.18 0.26 0.32 0.40

1 3

FIG. 125

7 7

ONE HOLE PIPE STRAP MATERIAL: FINISH: SERVICE:

Pre-galvanized carbon steel. Pre-Galvanized. For supporting schedule 40/80 steel sized piping or sizes in a horizontal position from sides of structural member. Fastener hole may be above or below the pipe. Specify pipe size and figure number.

ORDERING: PIPE SIZE

PIPE OD

A

MATERIAL SIZE

WEIGHT EACH, LBS.

/4 /8 1 /2 3 /4 1 11/4 11/2 2

0.540 0.675 0.840 1.050 1.315 1.660 1.900 2.375

/32 /32 9 /32 9 /32 13 /32 13 /32 13 /32 21 /32

16ga x 1/2 13ga x 3/4 13ga x 3/4 13ga x 3/4 11ga x 1 11ga x 1 11ga x 1 11ga x 1

0.02 0.04 0.05 0.06 0.06 0.17 0.18 0.36

1 3

9 9

10


SHORT CLIP

FIG. 135 MATERIAL: FINISH: SERVICE:

Carbon steel. Black or electro-galvanized. For use as a hanger from walls or ceilings where piping is run close to the structure. Specify pipe size, figure number and finish.

ORDERING: PIPE SIZE

A

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6

27/8 31/16 31/2 313/16 315/16 511/16 63/16 611/16 713/16 8 9 101/8

1 3

STOCK SIZE “B”

C

D

WEIGHT EACH, LBS.

MAX. REC. LOAD LBS.

/8 x 15/8 /8 x 15/8 1 /8 x 15/8 1 /8 x 15/8 1 /8 x 15/8 1 /4 x 15/8 1 /4 x 15/8 1 /4 x 15/8 1 /4 x 15/8 1 /4 x 15/8 1 /4 x 15/8 1 /4 x 15/8

/32 /32 9 /32 9 /32 9 /32 7 /16 7 /16 7 /16 7 /16 7 /16 7 /16 7 /16

/16 /16 7 /16 7 /16 7 /16 11 /16 11 /16 11 /16 11 /16 11 /16 11 /16 11 /16

.23 .26 .31 .35 .39 .94 1.14 1.33 1.52 1.76 1.98 2.25

500 500 500 500 500 1000 1000 1000 1000 1000 1000 1000

1

9

1

7

9

7

FIG. 136

HOLD DOWN STRAP

FIG. 137

DI HOLD DOWN STRAP

MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use as a hanger from walls or ceilings where piping is running close to the structure. Provides slight clamping action for tight fit. Specify pipe size, figure number and finish.

ORDERING: PIPE SIZE

3 31/2 4 5 6 8 10 12 14 16 18 20 24

A

B

7 31/2 71/2 4 8 41/2 91/16 59/16 111/8 65/8 131/8 85/8 151/4 103/4 171/4 123/4 183/4 14 203/4 16 223/4 18 243/4 20 303/4 24

D

/4 /4 3 /4 3 /4 1 1 1 1 1 1 1 1 11/2

STOCK SIZE “G”

H

L

WEIGHT EACH, LBS.

3

1

3

1

/4 x 11/2 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 2 1 /4 x 2 1 /4 x 2 1 /4 x 2 3 /8 x 2 3 /8 x 2 3 /8 x 2 3 /8 x 2 3 /8 x 3

/16 /16 7 /16 7 /16 9 /16 9 /16 9 /16 9 /16 11 /16 11 /16 11 /16 11 /16 13 /16

13/4 2 21/4 213/16 35/16 45/16 53/8 63/8 7 8 9 10 12

1.3 1.4 1.6 1.9 3 3.7 4.5 5.2 8.5 9.6 10.7 11.8 21.6

STOCK SIZE “G”

H

L

WEIGHT EACH, LBS.

/4 x 11/2 /4 x 11/2 1 /4 x 2 1 /4 x 2 1 /4 x 2 1 /4 x 2 3 /8 x 2 3 /8 x 2 3 /8 x 2 3 /8 x 2 3 /8 x 3

/16 /16 9 /16 9 /16 9 /16 9 /16 11 /16 11 /16 11 /16 11 /16 13 /16

13/4 21/4 35/16 45/16 53/8 63/8 7 8 9 10 12

1.4 1.7 3.1 3.9 4.6 5.4 9.2 10.4 11.5 12.7 23.1

DI PIPE SIZE

A

B

D

3 4 6 8 10 12 14 16 18 20 24

77/16 85/16 117/16 139/16 155/8 173/4 201/16 223/16 241/4 263/8 329/16

3.9 4.8 6.9 9.05 11.1 13.2 15.3 17.4 19.5 21.6 25.8

/4 /4 1 1 1 1 1 1 1 1 11/2 3

1

3

1

7 7

7 7

11


FIG. 145

PERFORATED HANGER STRAPPING MATERIAL: FINISH: SERVICE: ORDERING:

SIZE

FINISH

/4 x 24ga /4 x 20ga 3 /4 x 18ga 7 /8 x 16ga 1 x 24ga 3 /4 x 24ga 3 /4 x 20ga 3 /4 x 18ga 7 /8 x 16ga 1 x 24ga 3 3

FIG. 150

Carbon steel. Black or electro-galvanized. For use in various light duty applications. Specify size, figure number and finish. Available in 10’, 50’, and 100’ coils. STYLE

Plain Steel Coils Plain Steel Coils Plain Steel Coils Plain Steel Coils Plain Steel Lengths Galvanized Coils Galvanized Coils Galvanized Coils Galvanized Coils Galvanized Lengths

WEIGHT PER 1000, LBS.

50 75 100 170 230 50 75 100 170 230

RETURN LINE STRAIGHT J-HOOK MATERIAL: FINISH: SERVICE: ORDERING: PIPE SIZE

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For general piping running next to a wall. Specify pipe size, figure number and finish.

H

L

E

/16 /16 9 /16 9 /16 9 /16 9 /16 9 /16 9 /16 9 /16 9 /16

67/8 7 73/16 75/16 77/16 711/16 715/16 81/4 81/2 83/4

53/8 53/8 53/8 53/8 53/8 53/8 53/8 53/8 53/8 53/8

1

9

3

9

12

STOCK SIZE “S”

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

/4 x 11/4 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2

.55 .59 .82 .84 1.09 1.15 1.23 1.39 1.48 1.58

350 350 350 350 600 600 600 600 600 600

1 1


OFFSET RETURN LINE J-HOOK

FIG. 155 MATERIAL: FINISH: SERVICE: ORDERING: PIPE SIZE

C

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6

15/8 111/16 115/16 21/16 27/16 27/16 211/16 3 31/4 31/2 43/16 411/16

1 3

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For general piping running next to a wall. Specify pipe size, figure number and finish. H

L

E

/16 /16 9 /16 9 /16 9 /16 9 /16 9 /16 9 /16 9 /16 9 /16 9 /16 9 /16

63/8 61/2 611/16 613/16 615/16 73/16 77/16 73/4 8 81/4 10 11

5 5 5 5 5 5 5 5 5 5 61/4 7

9 9

STOCK SIZE “S”

WEIGHT EACH, LBS.

MAX. REC. LOAD LBS.

/4 x 11/4 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 2 1 /4 x 2

.55 .59 .82 .84 1.09 1.15 1.23 1.39 1.48 1.58 2.40 2.80

350 350 350 350 600 600 600 600 600 600 700 700

1 1

WALL PIPE SUPPORT

FIG. 160 MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For general piping running next to a wall. Specify pipe size, figure number and finish.

PIPE SIZE

C-C

H

B

L

3 31/2 4 5 6 8 10 12

103/4 111/4 113/4 127/8 137/8 161/8 181/4 201/4

/16 /16 9 /16 9 /16 9 /16 11 /16 11 /16 11 /16

21/4 21/2 23/4 31/4 313/16 55/16 63/8 73/8

121/4 123/4 131/4 143/4 163/4 18 201/4 221/4

9 9

STOCK SIZE “S”

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

/4 x 11/4 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/2 1 /4 x 11/2 1 /2 x 2 1 /2 x 21/2 1 /2 x 21/2

2.35 2.46 2.60 4.00 4.40 14.5 21.3 24.1

350 350 350 500 500 650 800 800

1 1

13


FIG. 165

STANDARD U-BOLT

FIG. 166

DI PIPE U-BOLT MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For support, anchor or guide of heavy loads. Specify pipe size, figure number and finish. Each u-bolt is furnished with four FIG. #785 hex nuts. MSS SP-58 TYPE 24 FS WW-H-171E TYPE 24

APPROVALS: PIPE SIZE

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 24 30

A

B

C

T

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

/4 /4 1 /4 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2 1 /2 1 /2 5 /8 5 /8 3 /4 7 /8 7 /8 7 /8 1 1 1 1

23/4 23/4 23/4 27/8 3 31/4 33/4 4 41/4 41/2 5 61/8 71/8 83/8 95/8 101/4 111/4 125/8 135/8 155/8 185/8

13/16 13/8 15/8 21/16 23/8 213/16 37/16 41/16 49/16 51/16 61/8 73/8 93/8 115/8 133/4 15 17 191/8 211/8 251/8 311/8

23/8 23/8 23/8 23/8 21/2 21/2 3 3 3 3 3 33/4 33/4 4 41/4 41/4 41/4 43/4 43/4 43/4 43/4

.11 .12 .12 .28 .30 .33 .73 .78 .84 .90 1.01 1.97 2.33 4.91 7.73 8.28 9.15 13.48 14.57 16.87 19.00

485 485 485 1220 1220 1220 2260 2260 2260 2260 2260 3620 3620 5420 7540 7540 7540 9920 9920 9920 9920

A

B

C

T

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

/2 /2 5 /8 5 /8 3 /4 7 /8 7 /8 7 /8 1 1 1 1

41/4 43/4 61/4 73/8 85/8 97/8 11 12 133/8 141/2 165/8 195/8

45/8 57/16 73/4 97/8 12 141/4 163/8 181/2 205/8 223/4 27 331/4

31/4 31/4 4 4 41/4 41/2 5 5 51/2 55/8 53/4 6

.84 1.06 2.23 2.60 4.49 7.15 8.10 9.00 13.20 14.40 16.80 22.00

2260 2260 3620 3620 5420 7540 7540 7540 9920 9920 9920 9920

1

1

3

1

DI PIPE SIZE

3 4 6 8 10 12 14 16 18 20 24 30

1 1

14


ADJUSTABLE CLEVIS HANGER

FIG. 200 MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS:

PIPE SIZE BOLT

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For the suspension of non-insulated stationary pipe lines. Specify pipe size, figure number and finish. MSS SP-58 TYPE 1 FM (3/4” - 8”) UL FS WW-H-171E TYPE 1 STEEL SIZE

UPPER

LOWER

A

B

C

E

WEIGHT EACH, LBS.

F

MAX. REC. LOAD, LBS.

3 7 /2 1/4 13ga x 7/8 13ga x 7/8 /8 111/16 21/16 15/16 /16 .18 610 1 7 7 3 11 9 15 7 /4 /4 13ga x /8 13ga x /8 /8 1 /16 2 /16 /16 /16 .18 610 3 5 1 1/4 13ga x 7/8 13ga x 7/8 /8 21/16 211/16 11/4 /8 .22 610 3 7 11/4 1/4 13ga x 7/8 13ga x 7/8 /8 21/2 33/16 111/16 /8 .26 610 3 11/2 1/4 12ga x 7/8 12ga x 7/8 /8 27/8 311/16 21/16 11/16 .34 610 3 2 1/4 12ga x 7/8 12ga x 7/8 /8 35/16 47/16 21/2 11/4 .38 610 21/2 5/16 9ga x 13/16 10ga x 13/16 1/2 41/2 57/8 33/8 115/16 .86 1130 3 5/16 9ga x 13/16 10ga x 13/16 1/2 43/4 61/2 311/16 13/4 .96 1130 31/2 5/16 8ga x 13/16 10ga x 13/16 1/2 57/8 715/16 413/16 29/16 1.14 1130 3 3 3 5 15 3 9 1 4 /8 8ga x 1 /16 10ga x 1 /16 /8 5 /16 8 /16 4 /16 2 /8 1.26 1430 5 5 1/2 4ga x 11/4 8ga x 11/4 /8 511/16 87/16 45/16 17/16 2.04 1430 3 6 1/2 3ga x 11/2 8ga x 11/2 /4 613/16 101/8 53/16 13/4 2.80 1940 1 1 1 3 13 5 3 7 /2 3ga x 1 /2 8ga x 1 /2 /4 7 /16 11 /8 6 /16 2 3.24 2000 3 8 5/8 3ga x 13/4 8ga x 13/4 /4 81/16 127/16 61/4 17/8 4.46 2000 3 7 10 3/4 /8 x 13/4 3ga x 13/4 /8 10 157/16 8 21/4 8.06 3600 3 7 12 3/4 /8 x 2 3ga x 2 /8 119/16 18 99/16 213/16 10.34 3800 1 1 14 7/8 /2 x 2 /4 x 2 1 129/16 199/16 109/16 29/16 14.80 4200 1 1 16 1 /2 x 21/2 /4 x 21/2 1 1315/16 2115/16 1115/16 213/16 21.00 4600 1 1 18 1 /2 x 21/2 /4 x 21/2 1 16 25 137/8 33/4 24.40 4800 5 3 20 11/4 /8 x 3 /8 x 3 11/4 171/2 271/2 151/8 33/4 47.00 4800 5 3 24 11/4 /8 x 3 /8 x 3 11/4 193/4 313/4 173/8 4 54.00 4800 3 3 30 11/4 /4 x 3 /8 x 3 11/4 241/8 391/8 211/2 43/4 69.50 6000 NOTE: Clevis hangers for 20” pipe and larger are furnished with pipe spacer on cross bolts. 1 3

15


FIG. 200V

ADJUSTABLE CLEVIS HANGER PVC MATERIAL: FINISH:

Carbon steel. Clevis top, bolt and nut are electro-galvanized. The entire bottom is vinyl coated. For brass, copper tubing, aluminum and glass pipe. Vinyl coating prevents pipe from coming in contact with the hanger. Specify pipe size and figure number.

SERVICE:

ORDERING: PIPE SIZE BOLT

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 7 8 10 12 1 3

FIG. 205

/4 /4 1 /4 1 /4 1 /4 1 /4 1 /4 1 /4 5 /16 3 /8 1 /2 1 /2 1 /2 5 /8 3 /4 3 /4 1 1

STEEL SIZE UPPER

LOWER

18ga x 7/8 18ga x 7/8 18ga x 7/8 18ga x 7/8 14ga x 7/8 14ga x 7/8 12ga x 13/16 12ga x 13/16 11ga x 13/16 11ga x 13/16 4ga x 11/4 3ga x 11/2 3ga x 11/2 3ga x 13/4 3 /8 x 13/4 3 /8 x 2

18ga x 7/8 18ga x 7/8 18ga x 7/8 18ga x 7/8 16ga x 7/8 16ga x 7/8 14ga x 13/16 14ga x 13/16 14ga x 13/16 14ga x 13/16 8ga x 11/4 8ga x 11/2 8ga x 11/2 8ga x 13/4 3ga x 13/4 3ga x 2

A

B

C

E

F

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

/8 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2 1 /2 5 /8 3 /4 3 /4 3 /4 7 /8 7 /8

13/4 113/16 21/8 21/2 213/16 35/16 41/2 413/16 515/16 61/16 511/16 613/16 713/16 81/16 10 119/16

21/8 25/16 23/4 31/4 313/16 41/2 55/16 69/16 77/8 85/16 87/16 101/8 115/8 127/16 157/16 18

1 11/16 15/16 13/4 21/16 29/16 37/16 33/4 47/8 5 45/16 53/16 63/16 61/4 8 99/16

/2 /2 3 /4 15/16 11/8 11/4 21/16 17/8 25/8 23/8 17/16 13/4 2 17/8 21/4 213/16

.12 .12 .12 .18 .24 .26 .58 .66 .82 .94 2.04 2.80 3.24 4.46 8.06 10.34

150 250 250 250 250 250 350 350 350 400 1430 1940 2000 2000 3600 3800

3 3

1 1

FLAT TOP CLEVIS HANGER MATERIAL: FINISH: SERVICE:

Carbon steel. Black, electro or hot-dipped galvanized. For general piping where space does not permit installation of standard FIG. #200 clevis hanger. Specify pipe size, figure number and finish.

ORDERING: PIPE SIZE BOLT

11/2 2 21/2 3 31/2 4 5 6 8

/4 /4 5 /16 5 /16 5 /16 3 /8 1 /2 1 /2 5 /8 1 1

STEEL SIZE UPPER

LOWER

8ga x 1 8ga x 1 8ga x 11/4 8ga x 11/4 8ga x 11/4 4ga x 11/4 4ga x 11/4 3ga x 11/2 3ga x 13/4

12ga x 7/8 12ga x 7/8 10ga x 13/16 10ga x 13/16 10ga x 13/16 10ga x 13/16 8ga x 11/4 8ga x 11/2 8ga x 13/4

16

A

B

/8 /8 1 /2 1 /2 1 /2 5 /8 5 /8 3 /4 3 /4

21/8 21/2 27/8 35/8 41/16 41/16 47/8 51/2 63/8

3 3

C

E

31/8 15/16 311/16 111/16 43/16 113/16 53/8 29/16 61/16 215/16 65/16 211/16 75/8 31/2 87/8 37/8 107/8 45/8

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

.42 .46 .78 .98 1.36 1.38 2.08 2.82 4.34

250 300 500 500 500 700 700 900 1000


CLEVIS HANGER WITH EXTENDED BOTTOM

FIG. 210 MATERIAL: FINISH: SERVICE:

Carbon steel. Black, electro or hot-dipped galvanized. For the suspension of non-insulated stationary pipe lines. The additional depth of bottom yoke will eliminate any interference between insulation and cross bolt. Specify pipe size, figure number and finish.

ORDERING: PIPE SIZE BOLT

/2 /4 1 11/4 11/2 2 21/2 3 4 5 6 8 10 12 1

3

STEEL SIZE UPPER

LOWER

/4 13ga x 7/8 /4 13ga x 7/8 1 /4 13ga x 7/8 1 /4 13ga x 7/8 1 /4 12ga x 7/8 1 /4 12ga x 7/8 5 /16 9ga x 13/16 5 /16 9ga x 13/16 3 /8 8ga x 13/16 1 /2 4ga x 11/4 1 /2 3ga x 11/2 5 /8 3ga x 13/4 3 3 /4 /8 x 13/4 3 3 /4 /8 x 2 1 1

12ga x 7/8 12ga x 7/8 12ga x 7/8 12ga x 7/8 12ga x 7/8 12ga x 7/8 10ga x 13/16 10ga x 13/16 10ga x 13/16 8ga x 11/4 8ga x 11/2 8ga x 13/4 3ga x 13/4 3ga x 2

PIPE SIZE BOLT

3 5/16 4 3/8 6 1/2 8 5/8 10 3/4 12 3/4 14 1 16 1 18 11/4 20 11/4 24 11/4

B

/8 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 5 /8 5 /8 3 /4 3 /4 7 /8 7 /8

C

E

313/16 41/4 33/4 43/16 41/8 43/4 7 4 /16 51/4 43/4 53/4 1 7 /4 87/16 813/16 103/16 9 103/4 1 10 /8 123/8 97/8 129/16 107/8 141/8 121/4 169/16 141/2 197/8 157/8 221/4

3 3

F

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

.30 .33 .34 .39 .47 .65 1.24 1.34 1.92 2.58 3.36 5.08 9.08 11.54

610 610 610 610 610 610 1130 1130 1430 1430 1940 2000 3600 3800

7 3 /16 2 /16 7/16 5 35/16 /8 5 7 3 /8 /8 315/16 11/16 67/16 11/4 73/4 115/16 715/16 13/4 813/16 21/6 87/16 17/16 91/4 13/4 7 10 /16 17/8 121/2 21/4 137/8 213/16 15

CLEVIS FOR A.W.W.A CAST IRON PIPE

FIG. 215 MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS:

A

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For the suspension of A.W.W.A. pipe. Specify pipe size, figure number and finish. MSS SP-58 TYPE 1 FS WW-H-171E TYPE 1 STEEL SIZE

UPPER

LOWER

8ga x 13/16 10ga x 13/16 8ga x 13/16 10ga x 13/16 3ga x 11/2 8ga x 11/2 3ga x 13/4 8ga x 13/4 3 /8 x 13/4 3ga x 13/4 3 /8 x 2 3ga x 2 1 1 /2 x 21/2 /4 x 21/2 1 1 /2 x 21/2 /4 x 21/2 5 5 /8 x 3 /8 x 3 5 3 /8 x 3 /8 x 3 5 3 /8 x 3 /8 x 3

A

B

C

/2 /8 3 /4 3 /4 7 /8 7 /8 1 1 1 11/4 11/4

55/8 6 613/16 85/16 101/2 113/4 1315/16 151/4 171/2 181/2 203/4

8 81/2 101/8 13 161/4 183/4 2115/16 241/4 271/2 293/4 34

1 5

E

F

49/16 29/16 45/8 21/8 53/16 13/4 67/8 17/8 81/2 21/4 93/4 213/16 1115/16 213/16 131/2 33/8 151/8 33/4 163/8 33/4 185/8 4

17

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

1.14 1.32 2.86 4.56 8.70 11.08 21.00 25.38 47.00 50.50 58.00

1130 1430 1940 2000 3600 3800 4600 4600 4800 4800 4800


FIG. 220 FIG. 221

CLEVIS HANGER WITH WELDED SHIELD CLEVIS HANGER WITH WELDED MSS SHIELD MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black or electro galvanized. For vapor sealed lines. Specify pipe size, figure number, insulation thickness and finish. HANGER SIZING GUIDE

PIPE SIZE

THICKNESS OF PIPE INSULATION /2”

1”

11/2”

2”

21/2”

3”

1 /2 2 2 21/2 21/2 3 31/2 4 5 5 6 7 10 12 14 16 18

2 /2 3 3 31/2 31/2 4 5 5 6 6 7 8 10 12 16 16 18

3 /2 31/2 4 4 5 5 6 6 7 7 8 10 12 14 16 18 20

5 5 5 5 6 6 7 7 8 8 10 10 12 16 18 18 20

6 6 6 6 7 7 8 8 10 10 10 12 14 16 18 20 24

7 7 7 7 8 8 10 10 10 10 12 12 16 18 20 20 24

1

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 1 3

FIG. 225

1

1

1

CLEVIS HANGER WITH PROTECTION SADDLE MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black or electro-galvanized. For supporting insulated pipe lines. Specify pipe size, figure number, insulation thickness and finish. HANGER SIZING GUIDE

PIPE SIZE

/2 3 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 1

THICKNESS OF PIPE INSULATION 1”

11/2”

2”

21/2”

3”

2 /2 3 3 31/2 31/2 4 5 5 6 6 7 8 10

3 /2 31/2 4 4 5 5 6 6 7 7 8 10 12

5 5 5 5 6 6 7 7 8 8 10 10 12

6 6 6 6 7 7 8 8 10 10 10 12 14

7 7 7 7 8 8 10 10 10 10 12 12 16

1

1

18


PLASTIC PIPE HANGER

FIG. 230 MATERIAL: FINISH: SERVICE:

Carbon steel. Black or electro-galvanized. For the suspension of flexible plastic pipe or rubber hose. Hanger must be used in conjunction with FIG. #235 channel shown below. Channel must be cut to allow installation of fittings and couplings. FIG. #230 V-Hangers must be installed at the end of the run of channel. Vertical adjustment of the supporting system is provided by the clevis top of the hanger. Upper nut must be tightened after the piping system is leveled. Specify pipe size, figure number and finish. FIG. #235 V-Channel must be ordered separately.

ORDERING:

STEEL SIZE

SIZE PIPE BOLT NO. SIZE

/2 /4 1 11/4 11/2 2 21/2 3 4 1

1

1

2

3

/4 /4 1 /4 1 /4 1 /4 1 /4 3 /8 3 /8 3 /8 1 1

UPPER “F”

LOWER “G”

/8 x 14ga 7/8 x 16ga /8 x 14ga 7/8 x 16ga 7 /8 x 14ga 7/8 x 16ga 7 /8 x 14ga 7/8 x 16ga 7 /8 x 14ga 7/8 x 16ga 7 /8 x 14ga 7/8 x 16ga 3 1 /16 x 11ga 13/16 x 14ga 13/16 x 11ga 13/16 x 14ga 13/16 x 11ga 13/16 x 14ga

B

C

D

E

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

/8 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2

57/8 57/8 57/8 57/8 57/8 57/8 815/16 815/16 815/16

53/16 5 47/8 45/8 47/16 41/8 613/16 63/8 511/16

11/4 11/4 11/4 11/4 11/4 11/4 23/8 23/8 23/8

47/16 41/4 41/16 37/8 311/16 33/8 53/4 55/16 41/2

.30 .30 .30 .30 .30 .30 .96 .96 .96

150 150 150 150 150 150 250 250 250

7

3

7

3

PLASTIC PIPE CHANNEL

FIG. 235 MATERIAL: FINISH: SERVICE:

A

Carbon steel. Black or electro-galvanized. For the suspension of flexible plastic pipe or rubber hose. Channel must be used in conjunction with FIG. #230 V-Hangers. Pipe is laid directly into the channel and where necessary, the channel may be cut to allow for fittings or couplings. Where practical, the hangers should be placed as close to the channel joint as possible. Determined by type of pipe supported. Maximum 450°F. Specify size number, figure number and finish. FIG. #230 V-Hangers must be ordered separately.

MAX TEMP: ORDERING:

CHANNEL NO.

PIPE SIZE

A

B

STEEL THICKNESS “C”

MAX. REC. LOAD PER LENGTH, LBS.

WEIGHT EACH, LBS.

1 2

/2 to 2 21/2 to 4

10’0” 10’0”

11/2 3

18ga 18ga

150 250

5.4 10.8

1

19


FIG. 240

LIGHT DUTY ADJUSTABLE CLEVIS HANGER MATERIAL: FINISH: SERVICE: ORDERING:

STEEL SIZE

PIPE SIZE BOLT

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 1 3

FIG. 245

/4 /4 1 /4 1 /4 1 /4 1 /4 1 /4 1 /4 5 /16 3 /8 1 1

Carbon steel or 304/316 stainless steel. Black or electro-galvanized. For the suspension of light loads, pipe or conduit. Specify pipe size, figure number and finish.

UPPER

LOWER

18ga x 7/8 18ga x 7/8 18ga x 7/8 18ga x 7/8 14ga x 7/8 14ga x 7/8 12ga x 13/16 12ga x 13/16 11ga x 13/16 11ga x 13/16

18ga x 7/8 18ga x 7/8 18ga x 7/8 18ga x 7/8 16ga x 7/8 16ga x 7/8 14ga x 13/16 14ga x 13/16 14ga x 13/16 14ga x 13/16

A

B

C

E

F

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

/8 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2 1 /2

13/4 113/16 21/8 21/2 213/16 35/16 41/2 413/16 515/16 61/16

21/8 25/16 23/4 31/4 313/16 41/2 55/16 69/16 77/8 85/16

1 11/16 15/16 13/4 21/16 29/16 37/16 33/4 47/8 5

/2 /2 3 /4 15 /16 11/8 11/4 21/16 17/8 25/8 23/8

12 12 12 18 24 26 58 66 82 94

150 250 250 250 250 250 350 350 350 400

3 3

1 1

ROLLER CHAIR MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS: PIPE SIZE

B

2 11/2 1 2 /2 2 3 21/4 31/2 21/2 4 27/8 5 33/8 6 37/8 7 41/2 8 51/8 10 63/8 12 71/2 14 83/8 16 93/8 18 107/16 20 115/8 24 14 30 1715/16

Carbon steel frame and bolt with cast iron roll or 304/316 stainless steel frame and bolt with 316 stainless steel roll. Black, electro or hot-dipped galvanized. For use on lines subject to horizontal movement. Specify pipe size, figure number and finish. MSS SP-58 TYPE 44 FS WW-H-171E TYPE 44

C

D

11/2 15/8 13/4 2 21/4 21/2 23/4 27/8 3 35/8 41/8 411/16 53/8 6 61/2 77/8 83/4

11/4 11/4 2 2 2 21/2 31/4 31/2 4 5 6 61/2 81/4 91/4 101/4 121/4 153/8 20

L

/8 /8 3 /8 1 /2 1 /2 1 /2 1 /2 1 /2 5 /8 5 /8 5 /8 3 /4 3 /4 3 /4 3 /4 7 /8 7 /8

STOCK SIZE “S”

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

/4 x 11/4 /4 x 11/4 1 /4 x 11/4 3 /8 x 11/2 3 /8 x 11/2 3 /8 x 11/2 3 /8 x 2 3 /8 x 2 3 /8 x 2 1 /2 x 2 1 /2 x 2 1 /2 x 21/2 1 /2 x 3 1 /2 x 3 1 /2 x 3 5 /8 x 4 5 /8 x 4

1.06 1.44 1.50 2.52 2.88 3.50 5.50 7.00 7.31 12.44 16.50 24.50 34.50 36.50 45.00 77.50 110.00

390 390 390 390 950 950 950 1350 1350 1730 2400 3130 3970 4200 4550 6160 7290

3

1

3

1


PIPE ROLLER STAND

FIG. 248 MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS:

Carbon steel frame with cast iron roll or 304/316 stainless steel frame with 316 stainless steel roll. Black, electro or hot-dipped galvanized. For use on lines subject to horizontal movement. Specify pipe size, figure number and finish. MSS SP-58 TYPE 44 FS WW-H-171E TYPE 45

PIPE SIZE

A

B

C

D

2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 24 30

13/4 13/4 13/4 13/4 2 2 2 33/8 33/8 37/8 37/8 41/4 41/4 41/4 43/8 51/8

83/8 83/8 83/8 83/8 97/8 97/8 97/8 85/8 85/8 11 11 123/8 123/8 123/8 131/2 17

6 6 6 6 6 6 6 8 8 8 8 10 10 10 10 10

4 4 4 4 41/4 41/4 41/4 5 5 6 6 61/2 61/2 61/2 61/2 73/4

311/16 9/16 315/16 9/16 41/4 9/16 41/2 9/16 9 5 /16 9 5 /16 9/16 61/16 9/16 813/16 11/16 97/8 11/16 117/16 13/16 121/16 13/16 135/8 13/16 1411/16 13/16 1511/16 13/16 1711/16 13/16 213/4 11/16

FINISH: SERVICE: ORDERING: APPROVALS: PIPE SIZE

A

2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 24 30

67/8 67/8 67/8 67/8 81/2 81/2 81/2 101/2 101/2 121/2 121/2 145/8 145/8 145/8 153/4 191/2

B

DIA. “G”

H

J

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

33/8 33/8 33/8 33/8 43/4 43/4 43/4 7 7 9 9 103/8 103/8 103/8 111/2 141/4

63/8 63/8 63/8 63/8 77/8 77/8 77/8 4 4 53/4 53/4 63/4 63/4 63/4 71/2 10

5.08 5.08 5.08 5.08 6.31 6.31 6.31 13.65 13.65 21.00 21.00 34.23 34.23 34.23 40.00 71.32

390 390 390 390 950 950 950 2100 2100 3075 3075 4980 4980 4980 6100 7500

A Dia Center of axle to bottom of plate. E Dia Center of pipe to bottom of base plate.

ADJUSTABLE PIPE ROLLER STAND

FIG. 249 MATERIAL:

DIA. “F”

E

Carbon steel frame with cast iron roll or 304/316 stainless steel frame with 316 stainless steel roll. Black, electro or hot-dipped galvanized. For use on lines subject to horizontal movement. Specify pipe size, figure number and finish. MSS SP-58 TYPE 46 FS WW-H-171E TYPE 47 C MIN.

C MAX.

61/2 43/4 55/8 61/2 5 57/8 1 5 6 /2 5 /16 69/16 61/2 59/16 67/16 6 63/16 77/16 6 63/4 8 6 71/4 81/2 71/2 101/8 1111/16 71/2 113/16 123/4 81/2 123/4 141/8 81/2 133/8 143/8 11 153/8 171/4 11 163/8 181/4 11 173/8 191/4 11 191/4 211/4 103/4 247/16 2611/16

D

E

F

G

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

37/8 37/8 37/8 37/8 51/8 51/8 51/8 73/8 73/8 91/2 91/2 111/8 111/8 111/8 121/4 153/4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 11/2

/2 /2 1 /2 1 /2 1 /2 1 /2 1 /2 3 /4 3 /4 7 /8 7 /8 11/8 11/8 11/8 11/4 13/4

11.00 11.00 11.00 11.00 13.10 13.10 13.10 29.00 29.00 40.00 40.00 63.84 63.84 63.84 71.00 125.28

390 390 390 390 950 950 950 2100 2100 3075 3075 4980 4980 4980 6100 7500

1 1

21

C Dia Center of pipe to bottom of base plate. D Dia Center to center of mounting holes in bottom plate. E Dia Mounting holes in bottom plate.


FIG. 250

ADJUSTABLE ROLLER HANGER MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

FIG. 260

PIPE SIZE

A

2 21/2 3 31/2 4 5 6 7 8 10 12 14 16 18 20 24

/2 /2 1 /2 1 /2 5 /8 5 /8 3 /4 3 /4 7 /8 7 /8 7 /8 1 1 1 11/4 11/4

B

Cast iron roll with carbon steel or 304/316 stainless steel yoke and cross bolt. Black, electro or hot-dipped galvanized. For suspension of pipe from a single support rod where horizontal movement may occur due to expansion or contraction. Specify pipe size, figure number and finish. MSS SP-58 TYPE 43 FS WW-H-171E TYPE 44 C

4 15/8 7 3 /8 2 43/8 21/4 45/8 21/2 43/4 23/4 57/8 33/8 57/8 4 61/2 45/8 71/4 51/8 9 63/8 5 9 /8 73/8 111/4 83/8 121/4 93/8 131/4 101/2 141/4 115/8 161/4 1311/16

1 1

D

E

25/8 33/8 33/4 41/4 47/8 57/8 7 8 9 11 13 141/4 161/4 181/4 201/4 241/4

3 23/4 33/8 35/8 33/4 41/4 41/4 5 51/2 67/8 77/8 91/4 101/4 111/4 121/4 141/4

F

L

41/4 61/2 43/4 65/8 51/2 71/4 6 8 61/2 81/2 8 97/8 9 113/8 10 12 12 133/4 141/4 17 17 187/8 181/2 217/8 20 241/8 22 261/2 24 281/8 30 327/16

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

1.35 1.75 2.46 2.60 3.43 5.12 6.50 7.25 12.00 18.00 22.50 33.00 46.00 50.50 65.00 113.00

150 225 310 390 475 685 780 780 780 965 965 1200 1200 1400 1600 1800

ADJUSTABLE TWO-ROD ROLLER HANGER MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS:

NOTE: All dimensions are subject to change without notice. If predrilling holes, contact factory for actual “C” dimension.

Cast iron roll and socket with carbon steel or 304/316 stainless steel cross rods. Black, electro or hot-dipped galvanized. For suspension of pipe where longitudinal movement due to expansion and contraction may occur. Specify pipe size, figure number and finish. MSS SP-58 TYPE 41 FS WW-H-171E TYPE 42

PIPE SIZE

A

B

C

E

L

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

2 21/2 3 31/2 4 5 6 7 8 10 12 14 16 18 20 24 30

/8 /2 1 /2 1 /2 1 /2 5 /8 3 /4 3 /4 7 /8 7 /8 7 /8 1 1 1 11/4 11/2 11/2

15/8 115/16 21/4 29/16 213/16 37/16 4 411/16 51/8 63/8 77/16 83/8 97/16 101/2 115/8 14 177/16

41/8 47/8 51/2 61/8 63/4 81/16 99/16 103/4 1115/16 141/16 165/16 173/4 209/16 217/8 241/4 285/8 351/2 22

33/16 35/8 315/16 45/16 413/16 59/16 61/2 613/16 8 91/4 107/16 121/8 1215/16 141/4 153/4 183/4 227/8

51/4 61/4 67/8 71/2 81/4 911/16 117/16 121/2 141/16 163/16 1715/16 201/8 221/8 241/2 271/4 321/8 39

.57 1.00 1.38 1.35 1.79 2.57 4.25 5.11 7.60 9.50 12.50 18.80 24.50 26.50 33.00 54.00 86.00

600 660 700 750 750 750 1070 1100 1350 1730 2400 3130 3970 4200 4550 6160 7290

3 1


PIPE COVERING PROTECTION SHIELD PIPE COVERING PROTECTION SHIELD WITH 5/16” HOLE

FIG. 300 FIG. 302 MATERIAL: FINISH: SERVICE: ORDERING: SHIELD SIZE NO.

LENGTH

Carbon steel or 304/316 stainless steel. Galvanized. For use on the outside of foam or fiber glass insulation. Specify shield size and figure number. STOCK SIZE “C”

DIA. “D”

HANGER WEIGHT PER SIZE 100, LBS.

0 12 24ga 17/8 11/2 25 3 1 12 24ga 2 /8 2 31 2 12 24ga 27/8 21/2 37 3 12 18ga 31/2 3 90 4 12 18ga 4 31/2 95 5 12 18ga 41/2 4 110 6 12 18ga 5 5 125 7 12 18ga 59/16 5 140 8 12 18ga 65/8 6 165 9 12 18ga 75/8 8 190 10 12 18ga 85/8 8 210 13 12 18ga 95/8 10 235 14 12 18ga 103/4 10 265 15 12 18ga 113/4 12 295 16 12 18ga 123/4 12 315 17 12 16ga 14 14 445 18 12 16ga 15 16 446 19 12 16ga 16 16 490 20 12 16ga 17 18 515 21 12 16ga 18 18 550 22 12 16ga 19 20 570 23 12 16ga 20 20 635 24 12 16ga 21 24 645 25 12 16ga 22 24 660 26 12 16ga 23 24 700 27 12 16ga 24 24 785 28 12 16ga 26 30 790 29 12 16ga 27 30 805 30 12 16ga 28 30 860 NOTE: FIG. #816 plated round head machine screws sold separately for use with the FIG. #302 shield with 5/16” hole.

SHIELD SIZE SELECTION TABLE FOR PIPE

TUBING SIZE

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 1 3

/2

A - Insulation Thickness /4 1 11/2

1

3

0 0 1 1 2 3 4 5 6 7 8 9

1 1 2 2 3 4 5 6 7 7 8 9

2 2 3 3 3 4 5 6 7 8 9 10

4 4 4 5 5 6 7 8 8 9 10 13

1

3

/2 3 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 24

0 1 1 2 2 3 4 5 -

1 1 2 3 3 4 5 6 -

1

SHIELD SIZE SELECTION TABLE FOR TUBING 2

5 6 6 7 7 8 8 9 9 10 13 14 23

A - Insulation Thickness /4 1 11/2

PIPE SIZE

/2

2 3 3 4 5 6 7 8 8 9 10 14 16 18 19 21 23 25 28

4 5 6 6 7 7 8 9 9 10 13 15 17 19 20 22 24 26 29

2

6 7 7 7 8 8 9 10 10 13 14 16 18 20 21 23 25 27 30


FIG. 307

MSS PIPE COVERING PROTECTION SHIELD MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Galvanized. For use on the outside of foam or fiberglass insulation. Specify shield size and figure number. MSS SP-58 TYPE 40 FS WW-H171E TYPE 41

SHIELD SIZE NO.

LENGTH

STOCK SIZE “C”

DIA. “D”

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

12 12 12 12 12 12 12 12 12 12 12 18 18 18 18 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24

18ga 18ga 18ga 18ga 18ga 18ga 18ga 18ga 16ga 16ga 16ga 16ga 16ga 16ga 16ga 14ga 14ga 14ga 14ga 14ga 14ga 12ga 12ga 12ga 12ga 12ga 12ga 12ga 12ga 12ga 12ga

17/8 23/8 27/8 31/2 4 41/2 5 59/16 65/8 75/8 85/8 75/8 85/8 95/8 103/4 113/4 123/4 14 15 16 17 18 19 20 21 22 23 24 26 27 28

24

HANGER WEIGHT PER SIZE 100, LBS.

11/2 2 21/2 3 31/2 4 5 5 6 7 8 7 8 10 10 12 12 14 16 16 18 18 20 20 24 24 24 24 30 30 30

53 68 82 102 113 126 142 158 233 266 300 399 449 503 562 1012 1094 1203 1292 1374 1463 2133 2256 2379 2492 2615 2737 2851 3087 3209 3322


FIG. 310 1 INCH FIG. 315 11/2 INCH FIG. 320

PIPE COVERING PROTECTION SADDLE MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For suspension of insulated pipe where heat losses are to be kept to a minimum. Specify pipe size, figure number, insulation size and finish. MSS SP-58 TYPE 39 FS WW-H-171E TYPE 40A & TYPE 40B

2 INCH FIG. 325

PIPE SIZE

FIG. NO.

ACTUAL THICKNESS OF COVERING

21/2 INCH

/4 /4 3 /4 1 1 1 11/4 11/4 11/4 11/2 11/2 11/2 11/2 2 2 2 2 2 21/2 21/2 21/2 21/2 21/2 3 3 3 3 3 31/2 31/2 31/2 31/2 31/2 4 4 4 4 4 4

310 315 320 310 315 320 310 315 320 310 315 320 325 310 315 320 325 330 310 315 320 325 330 310 315 320 325 330 310 315 320 325 330 310 315 320 325 330 340

7 /8 17/16 21/16 11/16 19/16 21/8 7 /8 15/8 21/16 1 11/2 25/16 213/16 11/16 19/16 21/8 25/8 31/8 11/16 17/8 25/16 27/8 33/8 1 19/16 21/16 29/16 31/16 11/4 113/16 21/4 23/4 35/16 11/16 19/16 21/16 29/16 31/16 41/16

FIG. 330 3 INCH FIG. 340 4 INCH

3 3

25

HANGER ROLLER SIZE FIG. #260 FIG. #250

2 3 4 21/2 3 4 21/2 31/2 5 3 31/2 5 7 31/2 4 5 7 8 31/2 5 6 7 8 4 5 7 8 10 5 7 8 8 10 5 7 8 8 10 12

21/2 31/2 5 3 4 5 3 5 5 31/2 5 6 7 4 5 6 7 8 5 6 7 7 10 5 6 7 8 10 6 7 8 10 10 6 7 8 10 10 14

C

D

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

19/16 21/8 23/4 113/16 27/16 27/8 115/16 29/16 31/16 21/8 211/16 37/16 313/16 27/16 27/8 311/16 315/16 411/16 211/16 33/4 315/16 47/16 415/16 215/16 31/2 41/8 411/16 5 37/16 4 43/8 413/16 51/2 39/16 37/8 411/16 51/8 59/16 69/16

115/16 25/8 33/8 21/4 215/16 31/2 21/2 31/8 311/16 25/8 31/4 41/8 45/8 3 31/2 43/8 43/4 51/2 31/4 41/8 45/8 51/4 53/4 31/2 43/16 47/8 53/8 515/16 4 411/16 53/16 53/4 67/16 43/16 411/16 51/2 61/16 61/2 711/16

.93 1.74 2.60 .93 1.74 2.60 1.32 1.82 2.60 1.32 1.82 2.75 3.01 1.34 1.98 2.80 3.18 3.97 1.34 1.98 2.80 3.20 3.98 1.48 2.08 2.90 3.01 4.49 1.48 2.08 2.90 3.43 4.49 1.58 2.14 2.95 3.43 4.49 6.09

1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1800 1800 1200 1200 1800 1800 1800 1200 1200 1800 1800 1800 1200 1800 1800 1800 1800 1200 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800


FIG. 310

PIPE COVERING PROTECTION SADDLE

1 INCH FIG. 315 11/2 INCH FIG. 320 2 INCH FIG. 325 21/2 INCH FIG. 330 3 INCH FIG. 340 4 INCH

PIPE SIZE

FIG. NO.

ACTUAL THICKNESS OF COVERING

5 5 5 5 5 5 6 6 6 6 6 6 8 8 8 8 8 8 10 10 10 10 10 10 12 12 12 12 12 12 14 14 14 14 14 14 16 16 16 16 16 16 18 18 18 18 18 18

310 315 320 325 330 340 310 315 320 325 330 340 310 315 320 325 330 340 310 315 320 325 330 340 310 315 320 325 330 340 310 315 320 325 330 340 310 315 320 325 330 340 310 315 320 325 330 340

1 11/2 2 29/16 31/16 43/16 1 11/2 2 21/2 3 41/8 1 11/2 2 211/16 31/8 41/8 1 19/16 21/16 29/16 31/16 41/16 1 11/2 21/16 25/8 31/16 41/8 1 11/2 2 21/2 3 4 1 11/2 2 21/2 3 4 1 11/2 2 21/2 3 4

26

HANGER ROLLER SIZE FIG. #260 FIG. #250

7 8 8 10 10 12 8 8 10 10 12 14 10 10 12 12 14 16 12 12 14 14 16 18 14 14 16 16 18 20 16 16 16 18 18 20 18 18 18 20 24 24 20 20 20 24 24 24

7 8 10 12 12 14 8 10 12 12 12 16 12 12 12 14 16 18 14 14 16 16 18 20 16 16 18 18 20 18 18 18 20 20 20 20 20 -

C

D

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

41/8 41/2 415/16 59/16 61/8 73/16 49/16 51/16 51/2 61/16 69/16 75/8 51/2 6 61/2 71/4 75/8 811/16 63/4 71/4 75/8 83/16 87/8 911/16 79/16 81/16 813/16 91/8 911/16 1013/16 83/8 87/8 91/4 93/4 101/4 117/16 93/8 97/8 101/4 107/8 113/16 125/16 103/8 107/8 111/2 12 125/16 131/2

413/16 55/16 57/8 61/2 71/16 81/4 53/8 57/8 61/2 71/16 75/8 91/8 65/8 71/8 75/8 85/16 91/8 101/8 713/16 85/16 91/16 95/8 101/4 115/16 91/8 95/8 103/16 1011/16 115/16 123/8 911/16 103/16 103/4 115/16 117/8 131/8 107/8 113/8 117/8 127/16 131/8 143/16 12 121/2 131/16 1315/16 141/4 157/16

2.68 3.30 3.45 6.85 4.49 6.09 3.82 4.28 5.40 6.85 7.69 10.24 4.39 5.82 6.41 7.21 9.14 10.24 4.93 6.66 8.57 8.91 11.10 14.10 7.19 7.61 8.73 9.69 11.38 14.20 7.19 7.67 9.43 9.69 11.82 18.48 7.99 8.35 10.00 14.62 18.17 21.80 8.62 8.92 13.19 16.89 18.20 21.95

1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 7200 5000 5000 5000 7200 7200 7200 5000 5000 7200 7200 7200 7200


PIPE COVERING PROTECTION SADDLE

FIG. 310 1 INCH FIG. 315

PIPE SIZE

FIG. NO.

ACTUAL THICKNESS OF COVERING

11/2 INCH

20 20 20 20 20 20 24 24 24 24 24 24

310 315 320 325 330 340 310 315 320 325 330 340

1 11/2 2 21/2 3 4 1 11/2 2 21/2 3 4

FIG. 320 2 INCH FIG. 325 21/2 INCH FIG. 330

HANGER ROLLER SIZE FIG. #260 FIG. #250

24 24 24 24 24 30 30 30 30 30 30 30

-

C

D

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

111/4 113/4 125/16 127/8 131/2 143/16 131/8 135/8 143/16 143/4 153/8 169/16

133/16 1311/16 141/4 1413/16 151/2 165/8 159/16 161/16 165/8 173/16 1713/16 19

9.26 13.76 14.98 16.79 18.40 22.83 10.70 16.05 17.62 18.75 19.72 23.14

7200 7200 7200 7200 7200 7200 7200 7200 7200 7200 7200 7200

3 INCH FIG. 340 4 INCH

STANDARD STEEL PIPE CLAMP

FIG. 400 MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For suspension of non-insulated pipe lines. Normally used with FIG. #740 weldless eyenut. Specify pipe size, figure number and finish. MSS SP-58 TYPE 4 FS WW-H-171E TYPE 4

PIPE SIZE

B

C

D

F

S

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 24 30

11/8 11/4 17/16 19/16 111/16 25/16 25/8 27/8 31/8 35/5 41/8 5 61/8 77/16 87/16 91/4 101/4 115/8 123/4 151/4 19

/16 /16 7 /16 7 /16 1 /2 1 /2 3 /4 3 /4 3 /4 3 /4 7 /8 7 /8 1 1 1 11/8 11/8 11/4 13/8 15/8 2

111/16 113/16 2 21/8 21/4 33/16 31/2 33/4 4 41/2 5 57/8 7 89/16 99/16 105/8 115/8 13 141/8 167/8 211/8

/16 /16 5 /16 5 /16 5 /16 1 /2 1 /2 1 /2 1 /2 5 /8 5 /8 3 /4 3 /4 7 /8 7 /8 7 /8 7 /8 1 11/8 11/4 13/4

11ga x 1 11ga x 1 11ga x 1 11ga x 1 11ga x 1 3ga x 1 3ga x 1 3ga x 1 3ga x 1 4ga x 11/4 4ga x 11/4 3 /8 x 11/2 3 /8 x 11/2 1 /2 x 2 1 /2 x 2 1 /2 x 21/2 1 /2 x 21/2 5 /8 x 21/2 5 /8 x 21/2 5 /8 x 3 3 /4 x 4

.27 .30 .33 .36 .37 1.04 1.19 1.27 1.43 1.94 2.20 5.42 6.51 13.60 16.05 20.00 22.00 32.00 36.00 50.00 113.90

500 500 500 500 800 1040 1040 1040 1040 1040 1040 1615 1615 2490 2490 2490 2490 3060 3060 3060 3500

1 3

7 7

5 5

27


FIG. 404

HEAVY DUTY RISER CLAMP MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For support of vertical piping. Specify pipe size, figure number and finish.

PIPE SIZE

CC

L

F

G

S

A

D

B

T

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

2 21/2 3 4 5 6 8 10 12 14 16 18 20

18 20 20 22 22 24 27 30 32 34 36 39 42

22 24 24 26 26 28 31 36 38 40 42 45 501/2

/2 /2 5 /8 3 /4 3 /4 7 /8 7 /8 11/4 11/2 11/2 11/2 11/2 2

21/2 21/2 3 4 4 5 5 6 7 7 8 8 8

/4 /4 1 11/4 11/4 11/2 11/2 21/4 21/2 21/2 21/2 21/2 31/2

11/4 11/4 11/4 11/4 11/4 11/4 11/4 15/8 17/8 17/8 2 2 25/8

11/4 11/4 11/2 2 2 21/2 21/2 3 31/2 31/2 2 2 2

2 2 2 2 2 2 2 3 3 3 3 3 41/4

/2 /2 5 /8 3 /4 3 /4 3 /4 3 /4 1 1 1 11/4 11/4 11/4

17.60 19.13 29.23 50.30 51.15 69.65 78.15 149.61 192.58 203.85 292.78 315.75 378.73

900 900 1500 2200 2200 3000 3000 5500 7800 7800 9000 9000 13500

1

3 3

PIPE SIZE

SHEAR LUG

# LUGS INCLUDED

2 - 2 /2 3 4-8 10 - 14 16 - 20

/2 x /2 x 3 /8 x 5/8 x 3 3 /4 x 3/4 x 3 1x1x3 11/4 x 11/4 x 3

2 2 2 4 4

1

FIG. 405

1

1

1

5

1 1

HEAVY DUTY TWO-BOLT PIPE CLAMP MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS: PIPE SIZE

B

3 31/8 4 33/4 5 43/8 6 51/4 8 61/4 10 711/16 12 91/4 14 10 16 115/16 18 141/2 20 16 24 181/2

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For suspension of heavy loads. Specify pipe size, figure number and finish. MSS SP-58 TYPE 4 FS WW-H-171E TYPE 4

C

D

F

S

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

1 1 1 11/8 11/8 11/4 15/8 15/8 15/8 3 3 31/4

4 47/8 51/2 65/8 75/8 91/16 111/8 117/8 133/16 181/2 20 23

/4 /8 7 /8 1 1 11/4 11/2 11/2 11/2 2 2 2

/8 x 2 /8 x 2 3 /8 x 2 1 /2 x 21/2 1 /2 x 21/2 5 /8 x 21/2 3 /4 x 3 3 /4 x 4 3 /4 x 4 3 /4 x 6 1x5 1x6

2.67 5.93 6.56 12.40 14.66 24.07 40.95 55.50 59.40 128.00 151.00 210.00

3300 3515 3515 4865 4865 6010 8675 9120 9120 9150 9150 9200

28

3 7

3

3


DOUBLE BOLT PIPE CLAMP

FIG. 410 MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS: PIPE SIZE

B

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 24

/16 1 /16 11/2 11/2 113/16 21/4 25/8 23/4 3 31/2 4 5 6 71/2 81/2 93/8 103/8 113/8 123/4 143/4

1 3

15

1

C

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For suspension of insulated pipe lines. Normally used with a FIG. #740 weldless eyenut. Specify pipe size, figure number and finish. MSS SP-58 TYPE 3 FS WW-H-171E TYPE 3 D

/8 27/8 /8 33/16 5 /8 33/4 3 /4 311/16 11/16 47/8 11/16 511/16 11/16 61/2 11/16 67/8 11/16 71/16 11/16 75/8 11/16 81/8 17/16 915/16 17/16 1015/16 17/16 12 17/16 13 2 145/16 2 155/16 2 165/16 2 171/2 2 191/2 5 5

E

F

H

S

WEIGHT EACH, LBS.

MAX.REC. LOAD, LBS.

21/4 21/2 21/2 27/8 33/4 411/16 53/8 6 63/16 61/2 7 89/16 99/16 105/8 115/8 1211/16 1311/16 1411/16 157/8 177/8

/8 /8 3 /8 3 /8 5 /8 5 /8 5 /8 5 /8 5 /8 3 /4 3 /4 1 1 1 1 11/4 11/4 11/4 11/2 11/2

15/8 111/16 21/16 21/4 213/16 33/16 31/2 33/4 4 41/2 5 61/8 71/8 87/8 97/8 11 12 13 143/8 163/8

/16 x 1 /16 x 1 3 /16 x 1 3 /16 x 1 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 3 /8 x 2 3 /8 x 2 3 /8 x 21/2 3 /8 x 21/2 1 /2 x 21/2 1 /2 x 21/2 5 /8 x 3 5 /8 x 3 5 /8 x 3 3 /4 x 3 3 /4 x 3

.60 .66 .69 .75 1.81 2.00 2.32 2.58 2.64 7.50 8.13 13.11 14.67 21.67 23.83 37.50 41.00 46.46 60.00 70.43

950 950 950 950 1545 1545 1545 1545 1545 2500 2500 2865 2865 3240 3240 4300 4300 4300 5490 4500

3 3

ORDERING: APPROVALS:

3

HEAVY DUTY DOUBLE BOLT PIPE CLAMP

FIG. 415 MATERIAL: FINISH: SERVICE:

3

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For supporting pipe requiring up to 4” of insulation. Maximum temperature rating is 750˚F. Specify pipe size, figure number and finish. MSS SP-58 TYPE 3 FS WW-H-171E TYPE 3

PIPE SIZE

B

C

D

E

F

H

6 8 10 12 14 16 18 20 24

43/4 6 71/2 85/8 95/8 107/8 131/2 141/2 151/2

13/4 2 21/4 21/2 21/2 3 31/2 31/2 31/2

103/16 113/8 131/8 145/16 151/2 171/8 181/4 203/4 225/16

815/16 101/8 113/8 129/16 131/2 147/8 161/4 181/4 195/16

1 11/8 11/4 11/2 11/2 13/4 2 2 2

6 71/4 9 103/8 115/8 131/8 151/4 17 181/2

S

/8 x 21/2 /2 x 21/2 1 /2 x 4 5 /8 x 4 3 /4 x 4 3 /4 x 5 1x4 1x5 1x6

3

1

WEIGHT MAX. RECOM LOAD, LBS. EACH, LBS. 650° F 750° F

12.00 18.50 34.00 42.00 60.00 80.00 115.00 140.00 190.00

29

3500 4800 5500 7000 9500 10000 13800 15300 16300

3125 4285 4910 6250 8485 8930 12325 13665 14555


FIG. 420

RISER CLAMP MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS:

PIPE SIZE

A

Carbon steel or 304/316 stainless steel. Black, PVC coated, electro or hot-dipped galvanized. For support of steel pipe risers. Specify pipe size, figure number and finish. MSS SP-58 TYPE 8 UL (2” - 8”) FS WW-H-171E TYPE 8 STOCK SIZE

B

BOLT SIZE

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

3 /2 85/8 21/8 8ga x 1 /8 x 11/2 .88 13 5 3 /4 8 /16 2 /16 8ga x 1 /8 x 11/2 .92 3 1 91/16 25/8 8ga x 1 /8 x 11/2 .94 3 11/4 97/16 215/16 8ga x 1 /8 x 11/2 1.00 3 11/2 10 37/16 8ga x 1 /8 x 11/2 1.04 9 3 2 10 /16 4 8ga x 1 /8 x 11/2 1.14 3 21/2 111/8 49/16 3ga x 1 /8 x 11/2 1.60 3 3 1113/16 51/4 3ga x 1 /8 x 11/2 1.70 1 31/2 13 6 3ga x 1 /2 x 11/2 2.06 1 4 135/8 65/8 3ga x 1 /2 x 11/2 2.20 1 5 141/8 75/8 3ga x 11/2 /2 x 13/4 3.40 1 6 153/8 87/8 3ga x 11/2 /2 x 13/4 3.72 3 5 8 181/2 121/2 /8 x 11/2 /8 x 21/2 7.20 3 5 10 203/4 143/4 /8 x 2 /8 x 21/2 11.00 1 5 12 223/4 163/4 /2 x 2 /8 x 31/4 16.10 1 5 14 24 17 /2 x 2 /8 x 31/4 17.00 5 3 16 26 21 /8 x 21/2 /4 x 4 29.16 5 3 18 28 23 /8 x 21/2 /4 x 4 31.91 5 3 20 30 25 /8 x 21/2 /4 x 41/2 35.00 5 7 24 36 291/4 /8 x 21/2 /8 x 41/2 42.00 5 7 30 42 351/4 /8 x 3 /8 x 4 60.00 NOTE: PVC coated riser clamps are completely plastic coated with zinc plated hardware. 1 3

FIG. 425

220 220 220 250 250 300 400 500 600 750 1500 1600 2500 2500 2700 2700 2900 2900 2900 2900 2900

MULTIPLE RISER CLAMP MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For general piping. Manufactured to special order. Furnish sketch showing pipe sizes, stock size, dimensional data, figure number and finish.

30


OFFSET PIPE CLAMP

FIG. 430 MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. To support general piping running from wall or floor. This clamp can be furnished with ‘L’ dimensions to suit field conditions. Specify pipe size, figure number and finish.

ORDERING: PIPE SIZE

L

/4 21/2 1 25/8 1 1 /4 213/16 11/2 215/16 2 33/16 21/2 37/16 3 33/4 1 3 /2 4 4 41/4 5 43/4 6 55/16 8 65/16 10 73/4 12 83/4 3

C-C

D

H

73/16 79/16 77/8 81/4 91/8 101/2 111/8 115/8 121/2 133/4 161/2 185/8 23 25

3

/8 /8 3 /8 3 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2 1 /2 3 /4 3 /4

/16 /16 7 /16 7 /16 7 /16 7 /16 7 /16 7 /16 9 /16 9 /16 9 /16 9 /16 13 /16 13 /16

3

STOCK SIZE “S”

WEIGHT EACH, LBS.

MAX. REC. LOAD. LBS.

/4 x 11/4 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/2 1 /4 x 11/2 3 /8 x 11/2 3 /8 x 11/2 3 /8 x 3 3 /8 x 3

1.25 1.33 1.42 1.49 2.03 2.25 2.50 2.75 3.68 4.25 6.80 8.20 21.42 23.37

200 200 200 200 410 410 410 410 600 600 850 850 870 870

7

1

7

1

EXTENDED PIPE CLAMP

FIG. 435 MATERIAL: FINISH: SERVICE: ORDERING: PIPE SIZE

L

/4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8

12 12 12 12 12 12 12 12 12 12 12 12

3

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For direct welding of hanger to structural steel. Specify pipe size, figure number and finish. D

G

/8 /8 3 /8 3 /8 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 5 /8 5 /8

47/16 411/16 5 51/4 6 71/4 77/8 83/8 91/4 101/2 121/2 145/8

3 3

S

WEIGHT EACH, LBS.

/4 x 11/4 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/4 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 1 /4 x 11/2 3 /8 x 2 3 /8 x 2

1.85 2.34 2.40 2.45 3.13 4.20 4.47 4.74 4.90 5.32 11.15 12.65

1 1

31


FIG. 440

FOUR SECTION RODDING BAND MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For avoiding the possibility of joints blowing out on high pressure cast iron water mains. Made to the City of New York or the New York Port Authority specifications. Four FIG. #465 square washer plates for the tie rod must be order separately. Specify pipe size, figure number and finish.

ORDERING: PIPE SIZE

INNER DIA.

STOCK SIZE

D

E

F

G

4 6 8 12 16 20 24 30 36

47/8 7 91/8 133/8 171/4 211/2 26 321/4 381/2

3

/8 x 3 /8 x 3 1 /2 x 4 1 /2 x 5 1 /2 x 5 1 /2 x 6 1 /2 x 6 5 /8 x 6 3 /4 x 8

71/2 81/2 9 121/4 141/4 163/8 19 23 261/4

43/8 53/8 63/8 87/8 107/8 13 151/4 183/4 22

1 1 1 1 1 1 1 1 1

11/2 11/2 1 1 1 11/4 11/4 11/4 11/2

3

FIG. 450

SOCKET CLAMP

FIG. 455

SOCKET CLAMP WASHER MATERIAL: FINISH: SERVICE:

ROD DIA. “A”

K

/8 /8 7 /8 7 /8 7 /8 7 /8 7 /8 7 /8 7 /8

11/4 11/4 11/4 11/2 11/2 11/2 17/8 21/4 21/4

7 7

L

TIE ROD SIZE

/8 /8 5 /8 5 /8 5 /8 5 /8 5 /8 5 /8 5 /8

/4 /4 3 /4 1 1 1 13/8 13/4 13/4

5 5

3 3

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For underground A.W.W.A. cast iron water pipe to prevent joints from separating. Specify pipe size, figure number and finish. Two FIG. #455 washers are required for each clamp and must be ordered separately.

ORDERING:

PIPE SIZE

H

D

I.D.

L

STOCK SIZE “S”

WEIGHT EACH, LBS. WASHER CLAMP

3 5 3 3 /4 /8 3.96 12 /8 x 2 0.79 5.95 3 5 3 4 /4 /8 4.8 12 /4 1/2 x 2 0.79 8.00 3 5 6 /4 /8 6.9 151/2 1/2 x 2 0.79 10.00 3 5 8 /4 /8 9.05 171/2 1/2 x 2 0.79 12.10 3 5 10 /4 /8 11.1 191/2 1/2 x 2 0.79 13.63 3 5 1 12 /4 /8 13.2 22 /2 x 2 0.79 15.65 7 14 1 /8 15.3 281/2 3/4 x 3 2.25 45.00 16 11/8 1 17.4 303/4 3/4 x 4 2.25 63.00 18 11/4 11/4 19.5 345/8 3/4 x 4 3.37 76.00 20 13/8 11/4 21.6 371/2 3/4 x 5 3.37 100.05 3 24 11/2 11/2 25.8 43 /4 x 5 3.37 118.00 30 11/2 11/2 32 491/2 3/4 x 5 5.00 139.00 36 11/2 11/2 38.3 561/2 3/4 x 5 5.00 169.00 3 NOTE: If tie rod is larger than /4”, FIG. #465 square plate is used.

32


FIG. 460

FOUR-BOLT SOCKET CLAMP

FIG. 465

FOUR-BOLT SOCKET CLAMP WASHER

MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For clamping mechanical joint piping, mechanical joint fittings or socket joint fittings together; thus stopping separation or distortion of pipe lines under excessive water pressure. Specify pipe size, figure number and finish. Two FIG. #465 square washers are required for each clamp and must be ordered separately. National Fire Protection Association Standard NFPA 24 for outside protection.

ORDERING:

APPROVAL: PIPE SIZE

ROD DIA. “A”

D

I.D.

L

STOCK SIZE “S”

3 4 6 8 10 12 14 16 18 20 24

/4 /4 3 /4 3 /4 1 1 11/4 11/4 11/4 13/8 11/2

/8 /8 5 /8 5 /8 3 /4 7 /8 7 /8 1 11/4 11/4 11/2

3.9 4.8 6.9 9.05 11.1 13.2 15.3 17.4 19.4 21.6 25.8

13 145/8 167/8 191/8 213/8 251/8 281/4 313/8 351/8 373/4 441/2

/2 x 2 /2 x 2 1 /2 x 2 5 /8 x 21/2 5 /8 x 21/2 5 /8 x 3 3 /4 x 3 3 /4 x 4 3 /4 x 4 3 /4 x 5 3 /4 x 5

3 3

5 5

1

1.27 1.27 1.27 1.27 2.25 2.25 3.37 3.37 3.37 5.00 5.00

8 10 12 21 26 35 45 72 86 110 134

CORPORATION EYE BOLT

FIG. 470 MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel. Black. For use with FIG. #450 socket clamp. Specify figure number.

A

T

L

/4

3

41/2

3

1

WEIGHT EACH, LBS. WASHER CLAMP

33


FIG. 500

PIPE GUIDE MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. Pipe guide provides a compact, economical and positive method of directing pipe line movement along the axis of the pipe. Proper alignment of the adjoining pipe is of vital importance in the proper functioning of expansion joints in the line. A pipe hanger or roller support which only takes the weight of the line can not take the place of a pipe guide. Specify pipe size, figure number, insulation thickness, size number and finish.

ORDERING: SIZE NO.

1 2 3 4 5 6 7 8 9 10 11 12 13

A

B

4 53/8 1 4 /2 53/4 6 7 71/2 85/16 81/2 83/4 91/4 1111/16 101/8 12 11 131/4 12 139/16 133/4 151/4 143/4 153/4 161/4 183/4 181/4 191/2

C

D

4 4 6 6 8 8 8 8 8 8 8 8 8

21/2 21/2 4 4 5 5 5 5 5 5 5 5 5

BOLT SIZE “E”

F

G

H

WEIGHT EACH, LBS.

/2 /2 1 /2 5 /8 5 /8 3 /4 3 /4 3 /4 7 /8 7 /8 7 /8 1 1

71/16 81/8 109/16 133/16 151/4 167/8 183/4 201/4 221/4 26 28 311/2 351/2

91/2 111/4 123/4 151/2 171/2 191/4 201/2 221/2 241/2 281/2 30 34 391/2

8 8 10 10 12 12 12 12 12 12 12 12 12

13 15 26 35 48 59 66 69 88 132 144 153 172

1 1

GUIDE SIZE SELECTION TABLE PIPE SIZE

0

1

11/2

1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 24

1 1 1 1 2 2 3 3 4 4 6 8 9 10 10 11 12 13

1 1 1 1 2 2 3 3 4 4 6 8 9 10 10 11 12 13

1 2 2 2 3 3 3 3 4 4 6 8 9 10 10 11 12 13

34

J-INSULATION THICKNESS 2 21/2

2 3 3 3 3 3 4 4 4 5 6 8 9 10 10 11 12 13

3 3 3 3 4 4 4 4 5 5 7 8 9 10 10 11 12 13

3

4

5

3 4 4 4 4 4 5 5 5 6 7 8 9 10 10 11 12 13

4 4 5 5 5 5 6 6 7 7 8 9 10 10 11 12 12 13

5 5 6 6 6 7 7 7 8 8 9 10 10 11 12 12 13 -


LIGHT DUTY PIPE GUIDE

FIG. 502 MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. Pipe guide provides a compact, economical and positive method of directing pipe line movement along the axis of the pipe. Proper alignment of the adjoining pipe is of vital importance in the proper functioning of expansion joints in the line. A pipe hanger or roller support which only takes the weight of the line can not take the place of a pipe guide. Specify pipe size, figure number, insulation thickness, size number and finish.

ORDERING: SIZE NO.

1 2 3 4 5 6 7 8 9 10

A

B

4 53/8 1 4 /2 53/4 6 7 71/2 85/16 81/2 83/4 91/4 1111/16 101/8 12 11 131/4 12 139/16 133/4 151/4

C

D

BOLT SIZE “E”

F

G

H

WEIGHT EACH, LBS.

3 3 3 3 4 4 4 6 6 6

11/2 11/2 11/2 11/2 2 2 2 4 4 4

/16 /16 9 /16 11 /16 11 /16 13 /16 13 /16 13 /16 15 /16 15 /16

71/16 81/8 109/16 133/16 151/4 167/8 183/8 201/4 221/4 26

91/2 111/4 123/4 151/2 171/2 191/4 201/2 221/2 241/2 281/2

4 4 4 4 4 4 4 4 4 4

10 11 13 17 24 31 34 52 59 78

9 9

GUIDE SIZE SELECTION TABLE PIPE SIZE

0

1

11/2

1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16

1 1 1 1 2 2 3 3 4 4 6 8 9 10 10

1 1 1 1 2 2 3 3 4 4 6 8 9 10 10

1 2 2 2 3 3 3 3 4 4 6 8 9 10 10

J-INSULATION THICKNESS 2 21/2

2 3 3 3 3 3 4 4 4 5 6 8 9 10 10

3 3 3 3 4 4 4 4 5 5 7 8 9 10 10

3

4

5

3 4 4 4 4 4 5 5 5 6 7 8 9 10 10

4 4 5 5 5 5 6 6 7 7 8 9 10 10 -

5 5 6 6 6 7 7 7 8 8 9 10 10 -

35


FIG. 515

ADJUSTABLE PIPE SUPPORT MATERIAL: FINISH: SERVICE:

ORDERING: PIPE SIZE

2 3 4 5 6 8 10 12

FIG. 516 FIG. 517

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use in conjunction with a standard pipe and flange at base to support piping where an overhead supporting member is not available. The stem is threaded the full length, with a nut to allow a vertical adjustment to accommodate the pitch in the pipe line. Specify pipe size, figure number and finish.

STEEL SIZE

DIA. & LENGTH OF STEM

WEIGHT EACH, LBS.

/8 x 11/2 /8 x 11/2 3 /8 x 2 3 /8 x 2 1 /2 x 2 1 /2 x 2 1 /2 x 3 1 /2 x 3

/8 x 8 /8 x 8 1x8 1x8 11/4 x 8 11/4 x 8 11/2 x 8 11/2 x 8

1.92 2.20 3.23 3.67 5.92 6.77 11.56 13.08

3 3

7 7

ADJUSTABLE PIPE SUPPORT WITH U-BOLT ADJUSTABLE PIPE SUPPORT WITH DI U-BOLT MATERIAL: FINISH: SERVICE:

ORDERING: PIPE SIZE

3 31/2 4 5 6 8 10 12

STEEL SIZE

DIA. & LENGTH OF STEM

WEIGHT EACH, LBS.

/8 x 11/2 /8 x 11/2 3 /8 x 2 3 /8 x 2 1 /2 x 2 1 /2 x 2 1 /2 x 3 1 /2 x 3

/8 x 8 /8 x 8 1x8 1x8 11/4 x 8 11/4 x 8 11/2 x 8 11/2 x 8

3.2 3.3 4.3 4.7 8.2 9.3 16.0 19.9

STEEL SIZE

DIA. & LENGTH OF STEM

WEIGHT EACH, LBS.

/8 x 11/2 3 /8 x 2 1 /2 x 2 1 /2 x 2 1 /2 x 3 1 /2 x 3

/8 x 8 1x8 11/4 x 8 11/4 x 8 11/2 x 8 11/2 x 8

3.3 4.5 8.5 9.6 15.6 19.3

3

3

DI PIPE SIZE

3 4 6 8 10 12

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use in conjunction with a standard pipe and flange at the base to support piping where an overhead supporting member is not available. The stem is threaded the full length, with a nut to allow vertical adjustment to accommodate the pitch in the pipe line. Specify pipe size, figure number and finish.

3

7 7

7

36


FIG. 519

PIPE SADDLE SUPPORT WITH DI U-BOLT

FIG. 520

PIPE SADDLE SUPPORT WITH U-BOLT

FIG. 521

PIPE SADDLE SUPPORT WITHOUT U-BOLT

MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For general piping running close to the floor. Specify size, figure number and finish. Saddle furnished complete with or without u-bolt. Welded base plate and pipe as shown must be ordered separately. MSS SP-58 TYPE 37 (FIG. #520) TYPE 36 (FIG. #521)

APPROVALS: DI PIPE SIZE

A

B

WEIGHT EACH, LBS.

4 6 8 10 12 14 16 18 20 24

3 3 3 3 3 4 4 4 6 6

45/16 59/16 71/8 85/8 103/16 119/16 131/16 145/8 163/16 1813/16

6.88 11.32 14.57 18.11 23.34 38.92 44.32 52.67 84.55 99.93

PIPE SIZE

A

B

WEIGHT EACH, LBS.

4 3 43/16 6.72 5 3 413/16 7.30 6 3 57/16 11.06 8 3 615/16 14.30 10 3 87/16 18.53 12 3 915/16 23.92 14 4 1015/16 39.10 16 4 123/8 44.47 18 4 137/8 52.95 20 6 153/8 84.72 24 6 1715/16 100.00 30 6 215/16 113.10 36 8 241/2 163.74 NOTE: Gussets will be added to supports for pipe sizes 8� and above.

37


FIG. 525

PIPE SADDLE SUPPORT MATERIAL: FINISH: SERVICE: ORDERING: PIPE SIZE

2 3 4 5 6 8 10 12

FIG. 530

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For general piping running close to the floor. Specify size, figure number and finish.

STEEL SIZE

DIA. & LENGTH OF STEM

WEIGHT EACH, LBS.

/8 x 11/2 /8 x 11/2 3 /8 x 2 3 /8 x 2 1 /2 x 2 1 /2 x 2 1 /2 x 3 1 /2 x 3

/8 x 6 /8 x 6 1x6 1x6 11/4 x 6 11/4 x 6 11/2 x 6 11/2 x 6

1.57 1.85 2.70 3.14 4.90 5.75 9.88 11.40

3 3

7 7

ADJUSTABLE PIPE SADDLE SUPPORT WITH COUPLING MATERIAL: FINISH: SERVICE: ORDERING: PIPE SIZE

2 3 4 5 6 8 10 12

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For general piping running close to the floor. Specify size, figure number and finish.

STEEL SIZE

PIPE COUPLING SIZE

WEIGHT EACH, LBS.

/8 x 2 /8 x 21/2 3 /8 x 3 3 /8 x 3 1 /2 x 4 1 /2 x 4 1 /2 x 4 1 /2 x 4

11/4 11/2 2 2 21/2 21/2 3 3

1.35 2.45 3.63 4.30 7.03 8.53 13.04 15.07

3

3

38


ADJUSTABLE PIPE SADDLE SUPPORT ADJUSTABLE PIPE SADDLE SUPPORT WITH U-BOLT ADJUSTABLE PIPE SADDLE SUPPORT WITH DI U-BOLT

FIG. 535 FIG. 538 FIG. 539 MATERIAL: FINISH: SERVICE: ORDERING:

APPROVALS: PIPE PIPE SIZE SIZE “A”

DIMENSION “E” B

C

D

7

8 8 10 10 10 10 10 10 10 10 12 12 12 12 12

1 /2 11/2 21/2 21/2 21/2 21/2 21/2 21/2 3 3 4 4 4 4 4

B

C

D

2 /2 2 /2 3 /16 3 21/2 311/16 4 3 43/16 5 3 413/16 6 3 57/16 8 3 615/16 10 3 87/16 12 3 915/16 14 4 1015/16 16 4 123/8 18 6 137/8 20 6 153/8 24 6 1715/16 30 6 215/16 36 6 241/2 1

1

DI PIPE PIPE SIZE SIZE “A”

Carbon steel or 304/316 stainless steel. Black or hot-dipped galvanized. For general piping running close to the floor. Specify size, figure number, ‘L’ dimension and finish. Unit consists of saddle, nipple and reducer. Welded base plate and pipe must be ordered separately. MSS SP-58 TYPE 38 (FIG. #535)

1

MIN.

MAX.

WEIGHT EACH, LBS. SADDLE WITH ONLY REDUCER

8 81/4 91/4 10 101/2 113/4 131/2 15 161/4 173/4 191/2 21 233/4 27 301/4

13 131/4 14 143/4 151/4 161/2 181/4 193/4 203/4 221/4 24 251/2 281/4 311/2 343/4

4.14 4.40 5.83 6.48 10.24 13.16 17.23 22.56 29.20 33.53 52.83 56.96 78.92 90.40 107.92

DIMENSION “E” MIN.

MAX.

WEIGHT EACH, LBS. SADDLE WITH ONLY REDUCER

3 2 /2 3 /16 8 1 /2 8 /2 131/2 4.52 5 1 3 4 3 4 /16 10 2 /2 9 /8 143/8 5.99 6 3 59/16 10 21/2 105/8 155/8 10.50 8 3 71/8 10 21/2 1115/16 1611/16 13.43 5 1 11 10 3 8 /8 10 2 /2 13 /16 187/16 16.81 12 3 103/16 10 21/2 151/4 20 21.98 14 4 119/16 10 3 167/8 213/8 29.02 16 4 131/16 10 3 187/16 2215/16 33.38 18 6 145/8 12 4 201/4 243/4 52.55 20 6 163/16 12 4 2113/16 265/16 56.79 24 6 1813/16 12 4 245/8 291/8 78.85 30 6 225/16 12 4 28 321/2 94.57 36 6 255/8 12 4 313/8 357/8 109.32 NOTE: Gussets will be added to supports for pipe sizes 8” and above. 1

15

1

1

7.44 7.70 13.39 14.04 17.80 20.72 24.79 30.12 42.55 46.88 74.78 78.91 100.87 112.35 129.87

7.82 13.55 18.06 20.99 24.37 29.54 42.37 46.73 74.50 78.74 100.80 116.52 131.27

39


FIG. 540

ANGLE IRON SUPPORT MATERIAL: FINISH: SERVICE: ORDERING:

ANGLE SIZE

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For general piping. Specify angle size, figure number, rod size, center to center of holes and finish. 10

12

ALLOWABLE CONCENTRATED LOAD (KIPS*) AT CENTER OF SPAN 18 24 30 36 48 60 72

11/2 x 11/2 x 1/4 1.109 .924 .616 .462 2 x 2 x 1/4 2.117 1.764 1.177 .882 .71 3 x 3 x 1/4 3.860 2.577 1.930 1.54 4 x 3 x 3/8 5 x 3 x 3/8 6 x 4 x 3/8 *1 Kip 1000 lbs.

FIG. 545

.59 1.29 3.33 4.90 7.35

.97 2.50 3.66 5.50

2.00 2.93 4.40

1.67 2.44 3.67

84

1.43 2.10 3.14

CHANNEL ASSEMBLY MATERIAL: FINISH: SERVICE: ORDERING:

CHANNEL SIZE

Carbon steel. Black, electro or hot-dipped galvanized. For general piping. Specify size, figure number, end to end length, rod size, center to center of rod and finish. FIG. #805 washer plate can be welded to channel or ordered separately. ALLOWABLE CONCENTRATED LOAD (KIP*) AT CENTER OF SPAN 48 60 72 84 96 108 120

36

3 4.1 2.9 4 5.4 5.1 5 6.7 8.0 6 8.2 11.6 8 11.5 21.7 *1 Kip 1000 lbs.

40

2.2 3.8 6.0 8.7 16.2

1.7 3.0 4.8 7.0 13.0

1.4 2.5 4.0 5.8 10.8

1.2 2.2 3.4 5.0 9.3

1.1 1.9 3.0 4.3 7.5

0.9 1.7 2.6 3.8 7.2

0.8 1.5 2.4 3.5 6.5


ANGLE BRACKET

FIG. 550 MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use on the side of steel or wooden beams. Specify size, figure number and finish.

BOLT SIZE

HOLE SIZE “A”

B

E

/8 /2 5 /8 3 /4 7 /8 1

/16 /16 11 /16 13 /16 15 /16 11/8

21/8 21/8 3 3 4 4

13/4 13/4 3 3 4 4

3 1

7 9

C

D

/16 /4 1 /4 3 /8 3 /8 1 /2

11/4 13/8 13/4 13/4 21/2 21/2

3

1

A

300 560 900 1300 1800 2400

Carbon steel or 304/316 stainless steel. Black or electro-galvanized. For the ceiling support of piping and equipment where metal concrete forms are installed. Furnished with plastic thread protection cap. Specify size number, figure number and finish.

ORDERING: SIZE NO.

.32 .38 1.15 1.69 3.12 4.02

METAL DECK ANCHOR BOLT

FIG. 555 MATERIAL: FINISH: SERVICE:

WEIGHT PER MAX. REC. 100, LBS. LOAD, LBS.

H

STOCK SIZE “S”

T

L

WEIGHT PER REC. MAX. 100, LBS. LOAD, LBS.

3 1 /8 11/4 1/4 x 11/4 1 6 80 610 1 2 /2 11/4 1/4 x 11/2 11/4 6 99 1130 5 3 /8 11/4 1/4 x 11/2 11/2 6 160 1810 3 4 /4 11/4 1/4 x 11/2 13/4 6 225 2710 7 1 5 /8 11/4 /4 x 2 2 6 310 3770 1 6 1 11/4 /4 x 2 21/4 6 359 4960 NOTE: Special H & L dimensions are available upon request.

41


FIG. 560

OVERHEAD ANCHOR BOLT MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black or electro-galvanized. For the ceiling support of heavy piping and equipment. Furnished with plastic thread protection cap. Specify size number, figure number and finish. FIG. #770 rod coupling must be ordered separately.

ORDERING: SIZE NO.

1 2 3 4 5 6

FIG. 561

A

B

WEIGHT EACH, LBS.

REC. MAX. LOAD, LBS.

/8 /2 5 /8 3 /4 7 /8 1

3 3 31/2 31/2 4 4

1.15 1.35 1.67 2.28 2.78 3.35

610 1130 1810 2710 3770 4960

3 1

FEMALE OVERHEAD ANCHOR BOLT MATERIAL: FINISH: SERVICE: ORDERING:

FIG. 565

Carbon steel or 304/316 stainless steel. Black or electro-galvanized. For the ceiling support of heavy piping and equipment. Specify size number, figure number and finish.

SIZE NO.

A

B

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

1 2 3 4 5 6 7 8 9

3 3 31/2 31/2 4 4 41/2 5 6

/8 /2 5 /8 3 /4 7 /8 1 11/8 11/4 11/2

1.2 1.4 1.8 2.4 2.9 3.4 4.2 5.6 7.7

610 1130 1810 2710 3770 4960 6230 8000 11630

3 1

ANCHOR BOLT MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black or electro-galvanized. For the ceiling support of heavy piping or equipment. Specify rod size, figure number, length, thread length and finish.

42


FIG. 600

CONCRETE INSERT BOX

FIG. 605

CONCRETE INSERT NUT

MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

Heavy gauge sheet metal. Black or electro-galvanized. Heavy gauge insert box is nailed to concrete form and can accomodate 1/4” & 3/4” rod diameters. When concrete has set, knock out plug can be removed and insert nut installed. Side openings accomodate up to 1/2” reinforcing rods. Specify figure number and finish. FIG. #605 insert nut must be ordered separately by rod size. MSS SP-58 TYPE 18

FIG. 610

C-CLAMP

FIG. 615

C-CLAMP WITH LOCKNUT

FIG. 620

C-CLAMP RETAINING STRAP

MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Black or electro-galvanized. For attaching to I-beams and wide flange beams where thickness does not exceed ¾”. Flange thickness may not exceed 5/8” when clamp is used with a retaining strap. Specify size, figure number and finish. MSS SP-58 TYPE 23 FM (FIG. #615, FIG. #610 with FIG. #620) FS WW-H-171E TYPE 23

FIG. #

C CLAMP

610 610 610 610 610 615 615 615 615 615

Standard Standard Standard Standard Standard With Lock Nut With Lock Nut With Lock Nut With Lock Nut With Lock Nut

B

C

D

/8 /2 5 /8 3 /4 7 /8 3 /8 1 /2 5 /8 3 /4 7 /8

23/8 23/8 23/8 23/8 3 23/8 23/8 23/8 23/8 3

23/8 25/16 25/16 21/4 25/8 23/8 25/16 25/16 21/4 25/8

3 1

F

/4 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 3

WEIGHT PER MAX. REC. 100, LBS. LOAD, LBS.

39 40 64 70 149 41 42 74 82 164

400 500 550 630 1200 400 500 550 630 1200

FIG. #620 LENGTH

WEIGHT PER 100, LBS.

41/2 6 8 10 12 14

21 30 36 45 54 62

FIG. #610

FIG. #615

FIG. #620

43


FIG. 618

PURLIN CLAMP MATERIAL: FINISH: SERVICE: ORDERING: A

B

C

D

E

/8

1

1

17/8

15/8

3

FIG. 630

Ductile Iron. Black or Electro-galvanized. For use with large-lip steel purlin beams. Specify figure number and finish. SCREW SET

WEIGHT EACH, LBS.

MAX REC. LOAD, LBS.

/8 - 16 x 3

.92

400

3

ELECTRICAL BEAM CLAMP MATERIAL: FINISH: SERVICE:

Malleable Iron. Electro-galvanized. For attaching hanger rod to beam or framework where thickness does not exceed1/2�. Rod tap on both bottom and back of clamp. Specify rod size and figure number.

ORDERING: ROD SIZE

B

C

D

/4 /8 1 /2

13/16 21/16 21/2

13/8 17/8 23/8

13/8 13/4 23/16

1 3

44

SCREW SET

WEIGHT EACH, LBS.

MAX REC. LOAD, LBS.

/16 - 18 /2 - 13 1 /2 - 13

.26 .70 1.26

335 525 750

5

1


JUNIOR TOP BEAM CLAMP

FIG. 635 MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

Malleable iron. Black or electro-galvanized. For use under roof installations with bar joist type construction where the thickness of the joist does not exceed 5/8”. Specify size, figure number, and finish. MSS SP-58 TYPE 19 FM (3/8” & 1/2” rod) UL

ROD SIZE “A”

B

C

/8 /2 5 /8 3 /4 7 /8

15/16 15/16 13/4 17/8 23/8

11/2 11/2 13/4 17/8 17/8

3 1

D

E

F

MAX PIPE SIZE

WEIGHT PER 100, LBS.

MAX REC. LOAD, LBS.

/2 /2 5 /8 5 /8 5 /8

1 1 13/8 13/8 13/8

/8 /8 11/8 13/8 13/8

4 4 5 6 8

32.0 32.0 58.0 82.0 79.5

350 470 550 700 1000

1 1

7 7

TOP BEAM CLAMP RETAINING STRAP

FIG. 637 MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Electro-galvanized. For use with FIG. #635 & FIG. #640 to eliminate movement of beam clamp due to vibration. Specify size, figure number, length and finish. Sizes shown are carried in stock, other sizes are also available.

ORDERING: ROD SIZE

MATERIAL

LENGTH “C”

HOLE SIZE “A”

7 /8 14ga x 1 10 /16 9 /2 14ga x 1 10 /16 5 11 /8 14ga x 11/4 10 /16 3 13 /4 14ga x 11/4 10 /16 7 15 /8 14ga x 2 10 /16 NOTE: For proper length, add 2” to flange width and select the next size strap. 3 1

JUNIOR TOP BEAM CLAMP, DOMESTIC

FIG. 638 MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

ROD SIZE

B

C

/8

113/16

15/8

3

Plate rolled steel with a plated hardened cup point. Electro-galvanized. For attaching hanger rod to top or bottom flange of a beam or a bar joist, where thickness does not exceed 3/4”. The open back design permits rod adjustment and visual verification during installation. Specify size, figure number and finish. MSS SP-58 TYPE 19 & 23 FM (NFPA 13, max related size) UL (Top & Bottom of beam) FS WW-H-171E D

/32

17

E

/4

3

F

/8 min.

3

G 15

/16

MAX REC. LOAD, LBS

400

45


FIG. 640

TOP BEAM CLAMP MATERIAL: FINISH: SERVICE:

Malleable iron. Black or electro-galvanized. For use under roof installations with bar joist type construction where the thickness of the joist does not exceed 1¼”. Specify size, figure number and finish. MSS SP-58 TYPE 19 FM (3/8” Only) UL (3/8” and 1/2” [1/2” for 4” IPS Max]) FS A-A-1192A TYPE 19

ORDERING: APPROVALS:

ROD SIZE “A”

B

C

/8 /2 5 /8 3 /4

13/8 13/8 17/8 17/8

2 2 23/8 23/8

3 1

FIG. 645 FIG. 650

E

F

MAX PIPE SIZE

/2 /2 5 /8 5 /8

1 1 13/8 13/8

/8 /8 11/4 11/4

4 4 5 6

1 1

7 7

WEIGHT PER MAX REC. 100, LBS. LOAD, LBS.

55 56 66 83

400 500 850 900

WELDING BEAM ATTACHMENT WELDING BEAM ATTACHMENT WITH BOLT AND NUT MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For attachment to bottom of steel beams. Specify rod size, figure number, with bolt and nut (if required) and finish. MSS SP-58 TYPE 22 FS WW-H-171E TYPE 22

APPROVALS:

ROD SIZE “A”

BOLT SIZE

/8 1 /2 5 /8 3 /4 7 /8 1 11/4 11/2 13/4 2 21/2

/2 x 23/4 5 /8 x 23/4 3 /4 x 3 7 /8 x 31/2 1x4 11/8 x 51/2 13/8 x 6 15/8 x 61/2 17/8 x 67/8 21/4 x 67/8 21/2 x 73/8

3

USING BOLT AND EYE ROD USING HANGER ROD WITH ATTACHMENT

D

1

ROD TAKEOUT E

E’

17/8 15/8 13/8 13/8 21/4 23/4 27/8 4 5 51/4 61/4

2 2 2 2 3 3 3 4 5 5 6

B

H

R

2 2 2 21/2 21/2 3 4 5 5 6 6

/16 11 /16 13 /16 29 /32 11/16 11/4 11/2 13/4 2 23/8 25/8

/8 7 /8 7 /8 11/8 11/4 11/2 2 21/2 23/4 31/4 31/2

9

7

S

T

WEIGHT EACH, LBS. WITHOUT WITH BOLT BOLT & NUT & NUT

650° F

750° F

11/2 3ga .835 1.055 610 510 11/2 3ga .790 1.150 1130 940 11/2 3ga .770 1.350 1810 1510 19/16 3/8 1.64 2.560 2710 2260 21/16 3/8 2.24 3.600 3770 3150 23/4 1/2 4.27 6.290 4960 4150 5 3 /8 8.09 10.22 8000 6660 1 3 /2 3/4 15.60 19.02 11630 9700 33/4 3/4 18.70 24.18 15700 14000 33/4 3/4 22.80 30.55 20700 18460 41/4 3/4 26.40 36.78 27200 24260

NOTE: 11/4” and larger furnished with pins with cotter pins

46

MAX REC. LOAD, LBS.


CONCRETE ROD ATTACHMENT PLATE

FIG. 646 MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For attaching a hanger rod to a concrete ceiling. Allows for vertical adjustment of the hanger rod. Specify rod size, figure number and finish.

ORDERING: ROD SIZE

A

B

C

D

E

F

G

W

WEIGHT EACH, LBS.

MAX REC. LOAD, LBS.

/8 /2 5 /8 3 /4 7 /8 1 11/8 11/4

1 1 1 1 1 2 2 2

8 8 8 8 8 8 8 8

10 10 10 10 10 12 12 12

5 5 5 5 5 6 6 6

21/4 21/8 21/4 21/4 31/8 31/2 35/8 35/8

/16 /16 9 /16 11 /16 11 /16 13 /16 15 /16 15 /16

/8 /8 1 /2 1 /2 1 /2 3 /4 3 /4 3 /4

2 2 2 21/2 21/2 3 3 4

11.66 11.66 15.16 16.12 16.73 34.99 35.22 38.81

610 1130 1810 2710 3770 4960 6230 8000

3 1

9 9

3 3

CONCRETE CLEVIS PLATE

FIG. 647 MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For attaching to a concrete ceiling where flexibility is desired. Concrete clevis plates are normally used with a weldless eye nut or a welded eye rod. Specify rod size, figure number and finish.

ORDERING: ROD SIZE

A

B

C

D

F

G

H

R

S

T

/8 /2 5 /8 3 /4 7 /8 1 11/8 11/4 11/2

1 1 1 1 1 2 2 2 2

8 8 8 8 8 8 8 8 8

10 10 10 10 10 12 12 12 12

5 5 5 5 5 6 6 6 6

/16 /16 9 /16 11 /16 11 /16 13 /16 15 /16 15 /16 11/8

/8 /8 1 /2 1 /2 1 /2 3 /4 3 /4 3 /4 1

2 2 2 2 3 3 3 3 4

/8 /8 7 /8 11/8 11/4 11/2 13/4 2 21/2

11/2 11/2 11/2 13/4 21/4 23/4 23/4 3 31/2

/4 /4 1 /4 3 /8 3 /8 1 /2 5 /8 5 /8 3 /4

3 1

9 9

3 3

7 7

1 1

U

W

WEIGHT EACH, LBS.

MAX REC. LOAD, LBS.

11.87 12.01 15.75 16.99 18.14 37.01 37.90 40.72 60.00

610 1130 1810 2710 3770 4960 6230 8000 11630

/2 2 /8 2 3 /4 2 7 /8 21/2 1 21/2 11/8 3 13/8 3 13/8 4 15/8 5 1 5

47


FIG. 655

SIDE BEAM CONNECTOR MATERIAL: FINISH: SERVICE:

Malleable iron. Black or electro-galvanized. For mounting to the side of wood beams using FIG. #815 drive screws. Bottom hole is tapped for rod. Specify rod size, figure number and finish.

ORDERING: SIZE NO.

1 2

FIG. 660

A

B

/8 /2

21/8 23/4

3 1

/8 /4

13 29

5

3

250 480

TOP BEAM HOOK MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For supporting piping from the top chords of trusses or from the top flanges of structural beams. Specify hook size, figure number, beam size or width and thickness of flange and finish.

ORDERING: HOOK SIZE

A

1 2 3 4 5

FIG. 665

WEIGHT PER MAX. REC. 100, LBS. LOAD, LBS.

C

STOCK SIZE

MAX. REC. LOAD, LBS.

/4 x 11/4 /4 x 11/4 3 /8 x 11/2 3 /8 x 2 1 /2 x 21/2

300 500 700 100 1200

B

/8 /2 5 /8 3 /4 7 /8

/16 /8 7 /16 1 /2 9 /16

3

5

1

1

3

1

ADJUSTABLE ROD BEAM CLAMP MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

Carbon steel. Electro-galvanized. To be used in the suspension of a hanger rod from an I-beam. Recommended for the attachment of beams where the flange widths are from 4” to 8”. Specify clamp size and figure number. MSS SP-58 TYPE 27

SIZE

G

H

B

STOCK SIZE

/8 /2 5 /8

11/16 1 15 /16

/16 /16 11 /16

2 2 2

3ga x 11/4 3ga x 11/2 3ga x 13/4

3 1

7 9

48

ADJUSTMENT MIN. MAX.

31/2 31/2 31/2

8 8 8

WEIGHT PER MAX. REC. 100, LBS. LOAD, LBS.

98 138 186

300 700 1000


SIDE BEAM CLAMP

FIG. 670 MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

SIZE NO.

1 2 3 4 5

A

/8 1 /2 5 /8 3 /4 7 /8 3

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For attachment to I-beams and wide flange beams where it is desirable for the rod and pipe to be suspended tangent to the edge of the flange. Specify clamp size, figure number, beam size or width and thickness of flange, and finish. MSS SP-58 TYPE 25 FS WW-H-171E TYPE 53 B

STOCK SIZE

/16 5 /16 7 /16 1 /2 9 /16

/4 x 11/4 /4 x 11/4 3 /8 x 11/2 3 /8 x 2 1 /2 x 21/2

5

1 1

STEEL BEAM CLAMP

FIG. 675 MATERIAL: FINISH: SERVICE: ORDERING:

CLAMP SIZE

STOCK SIZE

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For piping and equipment support. Specify clamp size, figure number, beam size or width and thickness of flange, figure number and finish. A

B

C

MAX. REC. LOAD, LBS.

1 3 1 /4 x 11/4 /8 4 3 550 1 1 1 2 /4 x 1 /2 /2 4 3 850 3 5 3 /8 x 11/2 /8 41/2 31/4 1100 3 3 4 /8 x 2 /4 41/2 31/4 1500 1 7 5 /2 x 2 /8 5 31/2 2600 1 6 /2 x 21/2 1 5 31/2 4300 Sizes #1 to #4 with flanges less than 4” are box style Sizes #5 to #6 with flanges 5” and less are box style

49


FIG. 680

BEAM CLAMP MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS: CLAMP SIZE

B

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For attachment on standard I-beam. Specify clamp size, figure number, beam size or width and thickness of flange, figure number and finish. MSS SP-58 TYPE 21 FS WW-H-171E TYPE 21 C

D

STEEL SIZE

BOLT SIZE

MAX. REC. LOAD, LBS.

5 1 2 11/8 /8 13/4 1/4 x 11/4 /2 1000 5 7 3 1 3 5 1 /8 /8 2 /4 /2 x 2 /4 3000 NOTE: All clamps supplied with spacer.

FIG. 685 FIG. 690

MALLEABLE BEAM CLAMP MALLEABLE BEAM CLAMP WITH EXTENSION PIECE MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS: ROD SIZE “A”

Malleable iron and steel. Black or electro-galvanized. For the attachment to bottom flange of I-beam and wide flange beams where flange widths are from 23/8” - 7” and the flange thickness does not exceed .60 inches. Specify clamp size, figure number and finish. MSS SP-58 TYPE 30 (When used with FIG. #690)

ROD TAKEOUT FOR WIDTH OF BEAM FLANGE “B” 23/8 3 4 5 6 7

CLAMP ONLY 31/2 3 /8 43/4 1 /2 47/8 5 /8 415/16 3 /4 53/16 7 /8 51/4

37/16 411/16 413/16 47/8 51/8 53/16

50

35/16 215/16 29/16 49/16 43/16 313/16 411/16 45/16 315/16 43/4 43/8 4 5 45/8 41/4 51/16 411/16 45/16

17/8 31/8 31/4 35/16 39/16 35/8

BOLT DIA.

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

/16 /16 7 /16 7 /16 7 /16 7 /16

2.20 2.42 2.63 2.67 2.87 3.01

1365 610 1130 1365 1365 1365

7

7


BEAM CLAMP ASSEMBLY

FIG. 695 MATERIAL:

FINISH: SERVICE: ORDERING: APPROVALS:

SIZE

WIDTH

Clamps are made of A-36 steel or 304/316 stainless steel. FIG. #740 weldless eye nuts are forged steel ASTM A-235 class C. Black, electro or hot-dipped galvanized. For clamping by “ice tong” action of arms with locking provided by the tie rod located below the flange. Specify clamp size, figure number and finish. FIG. #740 weldless eye nut must be ordered separately. MSS SP-58 TYPE 28 & TYPE 29 FS WW-H-171E TYPE 28

FLANGE SIZE MAX. THICKNESS

MAX. ROD “A”

WEIGHT EACH, LBS.

MAX. REC. LOAD, LBS.

8 12 11 16 30 48

2,800 2,800 5,000 5,000 11.500 11,500

5 3 1 3-8 /8 /4 5 3 2 7-12* /8 /4 3 3 3-8 /4 1 3 4 7-15* /4 1 5 5-11 1 11/2 6 8-16* 1 11/2 NOTE: *Supplied with links.

LIGHT WELDED BRACKET

FIG. 700 MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For the support of loads up to 750 Lbs. Constructed of facing angle irons with 1” space between. This bracket provides maximum lateral adjustment when carrying or suspending pipe. Specify size, figure number and finish. MSS SP-58 TYPE 31 FS WW-H-171E TYPE 32 CARBON & STAINLESS STEEL

SIZE NO.

C-C

A

E

H

B

L

ANGLE SIZE “S”

W

WEIGHT EACH, LBS.

13 3 0 111/2 9 2 /16 /4 13 1 x 1 x 3/16 3 6.90 1 13 3 1 15 /2 13 2 /16 /4 17 1 x 1 x 3/16 3 10.11 13 3 2 211/2 19 2 /16 /4 23 1 x 1 x 3/16 3 13.70 NOTE: Stainless steel dimensions may change due to availability of stainless steel angle.

51


FIG. 705

MEDIUM WELDED STEEL BRACKET MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For the support of loads up to 1,500 Lbs. Constructed of facing angle irons with 1” space between. This bracket provides maximum lateral adjustment when carrying or suspending pipe. Specify size, figure number and finish. MSS SP-58 TYPE 32 FS WW-H-171E TYPE 33 CARBON STEEL

SIZE NO.

C-C

A

E

0 1 2

151/2 211/2 271/2

12 18 24

21/2 21/2 21/2

H

B

L

ANGLE SIZE “S”

W

WEIGHT EACH, LBS.

/16 /16 13 /16

11/4 11/4 11/4

18 24 30

11/2 x 11/2 x 3/16 13/4 x 13/4 x 3/16 2 x 2 x 1/4

4 41/2 5

16.10 26.00 45.00

W

WEIGHT EACH, LBS.

13 13

STAINLESS STEEL SIZE NO.

C-C

A

E

H

B

ANGLE SIZE “S”

L

0 151/2 12 21/2 13/16 11/4 18 11/2 x 11/2 x 3/16 4 18.10 1 1 13 1 1 21 /2 18 2 /2 /16 1 /4 24 2 x 2 x 1/4 5 39.30 2 271/2 24 21/2 13/16 11/4 30 2 x 2 x 1/4 5 50.00 NOTE: Stainless steel dimensions may change due to availability of stainless steel angle.

FIG. 710

HEAVY WELDED STEEL BRACKET MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For the support of loads up to 3,000 Lbs. Constructed of facing angle irons with 1” space between. This bracket provides maximum lateral adjustment when carrying or suspending pipe. Specify size, figure number and finish. MSS SP-58 TYPE 33 FS WW-H-171E TYPE 34 CARBON STEEL

SIZE NO.

C-C

A

B

0 1 2 3 4 5

151/2 213/8 271/2 331/4 39 46

12 18 24 30 36 42

13/8 13/8 11/4 11/2 11/2 2

E

F

23/4 1 Hole 23/4 23/4 23/4 21/2 3 21/2 3 31/2 1 3 /2 31/2

H

L

ANGLE SIZE “S”

W

WEIGHT EACH, LBS.

/16 /16 11/8 11/8 11/8 11/8

18 24 30 36 42 50

2 x 11/2 x 1/4 2 x 2 x 1/4 21/2 x 2 x 3/8 21/2 x 2 x 3/8 31/2 x 21/2 x 3/8 31/2 x 21/2 x 3/8

4 5 5 5 6 6

25.0 38.0 69.0 82.1 130.0 155.0

ANGLE SIZE “S”

W

WEIGHT EACH, LBS.

13 15

STAINLESS STEEL SIZE NO.

C-C

A

B

E

F

H

L

0 151/2 12 13/8 23/4 1 Hole 13/16 18 2 x 2 x 1/4 5 31.1 3 3 3 3 15 1 21 /8 18 1 /8 2 /4 2 /4 /16 24 2 x 2 x 1/4 5 44.6 2 271/2 24 11/4 23/4 21/2 11/8 30 21/2 x 21/2 x 3/8 6 89.0 3 331/4 30 11/2 3 21/2 11/8 36 21/2 x 21/2 x 3/8 6 110.9 4 39 36 11/2 3 31/2 11/8 42 31/2 x 31/2 x 3/8 8 186.0 1 1 1 5 46 42 2 3 /2 3 /2 1 /8 50 31/2 x 31/2 x 3/8 8 220.0 NOTE: Stainless steel dimensions may change due to availability of stainless steel angle. 52


FIG. 715

LIGHT WELDED STEEL BRACKET

FIG. 720

SIDE CLIP

MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For the suspension of hanger rods from steel columns or walls. Using a FIG. #720 clip which consists of two steel plates joined by a bolt and nut in one end, rod can be suspended at any point along the length of the bracket, thus providing horizontal adjustment. Specify bracket size number, figure number, clip number (if required) and finish. MSS SP-58 TYPE 31 FIG. #715

BRACKET SIZE

B

C-C

1 2 3

8 12 18

61/2 101/2 161/2

HOLES “H”

L

/16 /16 13 /16

9 13 19

13 13

STOCK SIZE “S”

WEIGHT EACH, LBS.

/8 x 2 /8 x 2 3 /8 x 2

4.2 6.5 9.4

3 3

FIG. #720 CLIP NUMBER

PIPE SIZE

ROD SIZE “A”

WEIGHT EACH, LBS.

3 3 1 /4 TO 2 /8 0.80 1 1 1 2 2 /2 TO 3 /2 /2 1.24 NOTE: Piping suspended from FIG. #720 clip shall not exceed 3½” in diameter and clip must be ordered separately.

TURNBUCKLE

FIG. 730 MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For providing adjustment up to 6” for heavy loads. Specify rod size, figure number and finish. MSS SP-58 TYPE 13 FS WW-H-171E TYPE 13

ROD BODY WEIGHT MAX. REC. LOAD, SIZE LENGTH EACH, LBS. LBS. 650° F

/8 /2 5 /8 3 /4 7 /8 1 11/8 11/4 11/2 3 1

71/8 79/16 77/8 81/8 85/8 87/8 91/8 91/8 93/4

.42 .65 .98 1.45 1.85 2.60 4.06 4.00 6.15

1200 2200 3500 5200 7200 9300 11600 15200 21000

53


FIG. 735

FORGED STEEL CLEVIS MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS: ROD SIZE (TAP)

/8 /2 5 /8 3 /4 7 /8 1 11/8 11/4 11/2

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use on high temperature piping installations. Specify size, figure number, rod tapping size, pin hole size, pin size (if required), grip size and finish. MSS SP-58 TYPE 14 FS WW-H-171E TYPE 14

BODY SIZE

A

D

#2

9

3 /16

#2.5

N

W

1 /16

5

/8

1 /16

4

21/2

1

11/4

#3

51/16

3

11/4

11/2

#3.5

6

31/2

11/2

13/4

PIN OR BOLT SIZE “P”

/2 /8 3 /4 7 /8 1 11/8 11/4 11/2 15/8

3 1

FIG. 740

WEIGHT EACH, LBS.

1

7

1

1.7

5

2.5 4.0 6.0

MAX REC. LOAD, LBS. 650° F

610 1130 1810 2710 3770 4960 6230 8000 11630

WELDLESS EYE NUT MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS: ROD SIZE “T”

A

/8 - 16 /2 - 13 5 /8 - 11 3 /4 - 10 7 /8 - 9 1-8

13/8 13/8 13/8 13/8 2 2

3 1

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use on high temperature piping installations. Specify size number, figure number and finish. MSS SP-58 TYPE 17 FS WW-H-171E TYPE 17 B

C

D

E

/16 /16 11 /16 11 /16 1 1

11/2 11/2 11/2 11/2 2 2

21/4 21/4 21/4 21/4 31/4 31/4

33/16 33/16 33/16 33/16 43/8 43/8

11 11

54

F

WEIGHT EACH, LBS.

SAFE WORKING LOAD, LBS.

/2 /2 1 /2 1 /2 3 /4 3 /4

.63 .63 .62 .60 1.70 1.70

650 1130 1810 2710 3770 4960

1 1


PLAIN EYE ROD

FIG. 745 MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use in hanger assemblies and supports to eliminate possible bending of threaded rod. Specify rod size, figure number, length, B dimension, C dimension and finish.

ROD SIZE “A”

B

C

MAX. REC. LOAD, LBS.

/8 /2 5 /8 3 /4 7 /8 1 11/8 11/4 11/2

/2 /8 3 /4 7 /8 1 11/8 11/4 13/8 15/8

21/2 21/2 21/2 3 31/2 4 41/2 5 6

240 440 705 1050 1470 1940 2430 3120 4650

3 1

1 5

WELDED EYE ROD

FIG. 750 MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use in hanger assemblies and supports to eliminate possible bending of threaded rod. Specify rod size, figure number, length, B dimension, C dimension and finish.

ROD SIZE “A”

B

C

MAX. REC. LOAD, LBS.

/8 /2 5 /8 3 /4 7 /8 1 11/8 11/4 11/2

/2 /8 3 /4 7 /8 1 11/8 11/4 13/8 15/8

21/2 21/2 21/2 3 31/2 4 41/2 5 6

610 1130 1810 2710 3770 4960 6230 8000 11630

3 1

1 5

55


FIG. 755

CONTINUOUS THREADED ROD MATERIAL: FINISH: SERVICE:

ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use in applications for attaching hangers to structural attachments. Continuous threaded rod can be cut to required lengths. Sizes below are stocked in 6’, 10’ and 12’ lengths. SAE national fine thread can be furnished to order. Specify rod diameter, figure number, length and finish.

ROD WEIGHT PER MAX. REC. SIZE 100, LBS. LOAD, LBS.

/4 /16 3 /8 1 /2 5 /8 3 /4 7 /8 1 11/8 11/4 13/8 11/2 1

5

FIG. 760

12 20 30 54 85 120 170 225 280 350 450 500

240 300 610 1130 1810 2710 3770 4960 6230 8000 9000 11630

HANGER ROD MATERIAL: FINISH: SERVICE:

ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use in applications for attaching hangers to structural attachments. Threaded on both ends and can be furnished in standard lengths of 8” - 240” Specify rod diameter, figure number, length, thread length and finish.

ROD SIZE STANDARD ROD MAX. REC. LOAD, “A” THREAD LENGTH “D” LBS. 650° F

/4 /8 1 /2 5 /8 3 /4 7 /8 1 1 3

21/2 21/2 21/2 21/2 3 31/2 4

56

240 610 1130 1810 2710 3770 4960


COACH SCREW ROD

FIG. 765 MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel. Black or electro-galvanized. For suspending supports from wood structures. Specify rod size, figure number, length and finish.

MINIMUM LENGTH COACH “C” MACHINE “D”

ROD SIZE “A”

/4 3 /8 1 /2

13/4 13/4 13/4

1

15/8 15/8 15/8

0.04 0.08 -

MATERIAL: FINISH: SERVICE: ORDERING: LENGTH

/4 /16 3 /8 1 /2 5 /8 3 /4 7 /8 1 11/8 11/4 11/2

/8 13/4 13/4 13/4 21/8 21/4 21/2 23/4 3 3 4

1

5

0.14 0.22

8

0.19 -

WEIGHT PER MAX. REC. 100, LBS. LOAD, LBS.

9 8 13 15 18 33 72 78 120 143 190

7

MATERIAL: FINISH: SERVICE: ORDERING: SIZE

LENGTH

/8 x 1/4 /2 x 3/8 5 /8 x 1/2 3 /4 x 5/8 7 /8 x 3/4 1 x 7/8

1 11/4 11/4 11/2 13/4 2

1

0.14

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For connecting lengths of threaded rod. Specify rod tapping size, figure number and finish.

240 300 610 1130 1810 2710 3770 4960 6230 8000 11630

REDUCING ROD COUPLING

FIG. 775

3

WEIGHT EACH, LBS PER LENGTH 4 6

ROD COUPLING

FIG. 770

ROD SIZE

31/2

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For connecting lengths of threaded rod. Specify rod tapping size, figure number and finish. WEIGHT PER MAX. REC. 100, LBS. LOAD, LBS.

11 12 16 31 39 41

225 610 1130 1810 2710 3770

57


FIG. 780

HEX HEAD MACHINE BOLT MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use as a fastening device. Specify size, figure number and finish. Length of bolt is measured from under the head to the extreme point. Sizes as shown are carried in stock, other sizes are also available. WEIGHT PER 100, LBS. LENGTH OF BOLT 23/4 3 31/4 31/2 33/4

DIA. OF BOLT

11/2

13/4

2

21/4

21/2

/8 1 /2 5 /8 3 /4 7 /8 1 11/8 11/4

9 18 31 49 -

10 20 33 52 -

11 21 35 55 -

22 37 58 -

- 24 25 39 41 61 64 89 93 - 128 - - -

3

27 43 67 98 134 -

FIG. 785

FINISHED HEX NUTS

FIG. 790

HEAVY DUTY HEX NUTS MATERIAL: FINISH: ORDERING:

/4 /8 1 /2 5 /8 3 /4 7 /8 1 11/8 11/4 13/8 11/2 3

0.74 1.60 3.75 7.33 11.9 19.0 28.3 40.3 54.3 73.0 94.3

48 73 106 145 193 -

50 76 110 150 -

41/2

5

51/2

6

52 80 115 156 207 -

56 86 123 167 221 -

61 92 131 178 235 302

65 98 140 189 249 320

69 105 148 200 263 337

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. Specify rod size, figure number and finish.

ROD WEIGHT PER 100, LBS. SIZE FIG. #785 FIG. #790 1

46 70 102 139 -

4

1.2 3.2 6.6 12 19 30 43 59 79 102 131

58


ROUND STEEL WASHERS

FIG. 795 MATERIAL: FINISH: ORDERING:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. Specify rod size, figure number and finish.

BOLT SIZE

OUTSIDE DIA.

HOLE DIA.

WEIGHT PER 100, LBS.

/4 /8 1 /2 5 /8 3 /4 7 /8 1 11/8 11/4 11/2

/4 1 13/8 13/4 2 21/4 21/2 23/4 3 31/2

/16 /16 9 /16 11 /16 13 /16 15 /16 11/16 11/4 13/8 15/8

0.67 1.50 3.90 7.80 11.00 15.00 19.00 22.00 26.00 38.00

1 3

3

5 7

LOCK WASHER

FIG. 800 MATERIAL: FINISH: ORDERING:

Carbon steel or 304/316 stainless steel. Black or electro-galvanized. Specify size, figure number and finish.

ROD SIZE

INSIDE DIA.

STEEL WIDTH

/8 /2 5 /8 3 /4

/16 /16 11 /16 13 /16

.141 .171 .203 .234

3 1

7 9

STEEL WEIGHT PER THICKNESS 100, LBS.

ROD SIZE

STOCK SIZE

7 15 26 43

STEEL WASHER PLATE

FIG. 805 MATERIAL: FINISH: SERVICE: ORDERING:

.094 .125 .156 .188

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For use as a heavy duty washer to suspend hanger rods. Specify rod tapping size, figure number and finish. WEIGHT PER 100, LBS.

/8 3 x 3 x 1/4 62 /2 3 x 3 x 1/4 62 5 /8 3 x 3 x 3/8 92 3 /4 4 x 4 x 3/8 164 7 /8 4 x 4 x 1/2 220 1 4 x 4 x 1/2 220 1 NOTE: /4� thick steel is kept in stock for all rod sizes. Special size and thickness available upon request. 3 1

59


FIG. 810

FENDER WASHER MATERIAL: FINISH: SERVICE: ORDERING: BOLT SIZE

OUTSIDE DIA.

HOLE DIA.

WEIGHT PER 100, LBS.

/4 /4 3 /8 3 /8 1 /2

11/4 11/2 11/4 11/2 2

/32 /32 13 /32 13 /32 17 /32

2.2 3.2 2.0 3.0 5.5

1 1

FIG. 815

9 9

DRIVE SCREW MATERIAL: FINISH: SERVICE: ORDERING: LENGTH

11/2 11/2 2

FIG. 820

Carbon steel. Electro-galvanized. For producing a greater bearing surface. Specify size and figure number.

Steel. Black. For fastening attachments to wood beams. Specify size, length and figure number.

PER SIZE WEIGHT 100, LBS.

14 12 16

1.6 1.4 2.5

HEX LAG SCREW MATERIAL: FINISH: SERVICE: ORDERING:

Steel. Black or electro–galvanized. For fastening devices to wood. Specify length, diameter, figure number and finish. WEIGHT PER 100, LBS. LENGTH OF SCREW 3 31/2 4

DIA. OF SCREW

1

11/4

11/2

13/4

/4 5 /16 3 /8 1 /2 5 /8 3 /4

1.5 2.5 3.6 -

1.8 2.9 4.2 -

2.0 3.3 4.7 8.8 -

2.3 2.6 3.7 4.2 3.7 4.1 5.9 6.7 5.4 6.1 8.5 9.6 - 10.9 15.4 17.3 - 20.2 27.4 30.4 - 42.5 47.0

1

60

2

4.8 7.7 11.1 20.1 34.8 53.1

41/2

5

51/2

6

7

5.3 8.5 12.1 22.8 37.6 57.4

6.0 9.6 13.6 24.5 41.8 63.7

10.3 14.7 27.3 44.8 -

7.2 11.3 16.2 29.1 49.0 74.3

18.6 35.9 57.2 89.4


PIPE SLEEVE WITH WELDED LUGS

FIG. 830 MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Black, electro or hot-dipped galvanized. For attaching to concrete forms to provide a smooth sealable channel for piping, eliminating the need to core drill. Pipe sleeves are cut from standard weight pipe with optional lugs to facilitate fastening. Specify nominal pipe size A, length, figure number, with or without lugs and finish.

ORDERING:

Shown with optional lugs.

NAILING SLEEVE

FIG. 835 MATERIAL: FINISH: SERVICE:

ORDERING:

Galvanized sheet metal or 304/316 stainless steel. Galvanized. For attatching to roof deck to provide a channel for piping, eliminating the need to core drill. Sleeves are made in all heights and diameters with optional tabs to facilitate fastening and an optional cap to keep out wet cement until pipe installation. Specify diameter, height, type, figure number, and with or without tabs.

Cap & Tabs TYPE 1

TYPE 2

TYPE 3

TYPE 4

TYPE 5

TYPE 6

Stapled or Tacked

Locking Tabs 100 pcs Min.

Finger Locks

Split, Butt Edges

Split, Overlap

Metal Deck Flange

FIG. 840 MATERIAL: FINISH: SERVICE:

ORDERING:

WATERPROOF SLEEVE Carbon steel or 304/316 stainless steel. Black, electro, hot-dipped galvanized or painted. For installing in concrete forms to provide a smooth, sealable channel for piping. Waterproof sleeves are cut from standard weight pipe and are furnished with a continuously welded water stop made from 1 /4� steel plate, to prevent the migration of water around outside of the sleeve. Specify nominal pipe size A, ring center line B, length, figure number and finish.

61

Tabs Only


FIG. 860

WEDGE ANCHOR MATERIAL: FINISH: SERVICE:

Carbon steel or 304/316 stainless steel. Electro-galvanized. For being driven into a pre-drilled hole where tightening nut can set anchor. Specify rod size, figure number and length.

ORDERING: SIZE

WEIGHT PER 100, LBS.

/8 x 21/4 /8 x 23/4 3 /8 x 3 3 /8 x 33/4 3 /8 x 5 1 /2 x 23/4 1 /2 x 33/4 1 /2 x 41/4 1 /2 x 51/2 1 /2 x 7 5 /8 x 31/2 5 /8 x 41/2

8 10 11 12 17 18 24 27 32 44 36 44

3 3

FIG. 865

SLEEVE ANCHOR WITH COUPLING

FIG. 867

SLEEVE ANCHOR MATERIAL: FINISH: SERVICE:

Carbon steel. Electro-galvanized. For anchoring to concrete and masonry substrates. Suitable for solid and hollow base materials. Specify size and figure number.

ORDERING:

FIG. #865 DRILL SIZE

SIZE

MIN. EMBED

FIG. #867 WEIGHT PER 100, LBS.

SIZE

DRILL SIZE

MIN. EMBED

WEIGHT PER 100, LBS.

3 5 5 /8 X 17/8 /8 15/8 9 /8 X 21/2 /8 2 25.5 1 1 3 3 /2 X 21/4 /2 21/4 21 /4 X 23/4 /4 21/4 46 NOTE: Length shown is measured for end of bolt to bottom of washer. 3

FIG. 874

MINI DROP-IN ANCHOR

FIG. 877

MINI DROP-IN SETTING TOOL MATERIAL: FINISH: SERVICE: ORDERING: SIZE

/8 1 /2 3

DRILL SIZE

Carbon steel. Electro-galvanized. For anchoring into solid concrete and hollow core concrete plank. Specify size and figure number. MIN DEPTH

/2 5 /8

/4 1

1

3

62

THREAD DEPTH

/32 /8

13 5


FIG. 875

DROP-IN ANCHOR

FIG. 876

DROP-IN SETTING TOOL

MATERIAL: FINISH: SERVICE: ORDERING: SIZE

Carbon steel or 304/316 stainless steel. Electro-galvanized. For anchoring into solid concrete. Specify size and figure number.

ANCHOR LENGTH

DRILL SIZE

MIN. EMBED

WEIGHT PER 100, LBS.

MIN. CONCRETE COMPRESSION STRENGTH 4,000 psi TENSION, LBS SHEAR, LBS

3 /4 1 /8 1 2.6 495 530 9 1 /8 1 /16 /2 19/16 6.8 1045 1145 1 5 /2 2 /8 2 11.6 1440 1600 5 1 7 /8 2 /2 /8 21/2 31.2 1860 3095 3 /4 33/16 1 33/16 47.6 3600 3920 NOTE: Allowable load capacities listed are calculated using an applied safety factor of 4.0. 1

3

HAMMER DRIVE ANCHOR

FIG. 878 MATERIAL: FINISH: SERVICE: ORDERING: SIZE

Carbon steel drive nail with Zamac alloy body. Electro-galvanized. For anchoring into solid concrete, block or brick. Specify size, figure number and finish.

DRILL SIZE

WEIGHT PER 100, LBS.

/4 1 /4 1 /4 1 /4 1 /4

1.5 1.75 2.25 2.5 3

/4 x 3/4 1 /4 x 1 1 /4 x 11/4 1 /4 x 11/2 1 /4 x 2 1

1

FIG. 880

SPRING WING TOGGLE & BOLT

FIG. 885

SPRING WING TOGGLE HEAD ONLY

MATERIAL: FINISH: SERVICE: ORDERING:

Carbon steel. Electro-galvanized. For use as a fastener for hollow walls. Specify size and figure number.

SIZE

DRILL SIZE

/4 x 3 /4 x 4 1 /4 x 6 3 /8 x 3 3 /8 x 4 3 /8 x 6 1 /2 x 4 1 /2 x 6

/8 /8 5 /8 7 /8 7 /8 7 /8 11/4 11/4

1 1

5 5

WEIGHT PER 100, LBS. TOGGLE W/ BOLT BOLT ONLY

6.5 7.5 9.5 16 18 23 42 50

3 3 3 7 7 7 9 9

ALLOWABLE LOAD TENSION, LBS SHEAR, LBS

70 70 70 140 140 140 230 230

120 120 120 140 140 140 160 160

63


NEOPRENE-IN-SHEAR HANGER

FIG. 900 ISOLATOR SIZE

BRD-1-A BRD-1-B BRD-1-C BRD-1-D BRD-2-A BRD-2-B BRD-2-C BRD-2-D BRD-3-A BRD-3-B BRD-3-C BRD-3-D

MAXIMUM LOAD, LBS. DEFLECTION

60 130 250 430 380 520 840 1070 750 1350 1900 3050

A

0.50

4 27/8 21/2

E

/2 17/8

1

0.50

51/2 33/4 4

0.50

61/4 41/4 53/8 1 23/8

/4 23/8

3

SPRING HANGER

FIG. 901 ISOLATOR SIZE

DIMENSIONS B C D

RATED LOAD SOLID LOAD, LBS. AT 1” DEFL LBS.

BS-50 BS-100 BS-150 BS-200 BS-300 BS-400 BS-500 BS-600 BS-700 BS-800 BS-1000

50 100 150 200 300 400 500 600 700 800 1000

126 207 263 348 500 605 750 891 1138 1155 1452

NEOPRENE-IN-SHEAR AND SPRING HANGER

FIG. 902 ISOLATOR SIZE

RATED LOAD LBS. AT 1” DEFL.

BRSA-1-15 BRSA-1-25 BRSA-1-50 BRSA-1-100 BRSA-1-150 BRSA-1-200 BRSA-1-300 BRSA-1-400 BRSA-1-500 BRSA-1-600 BRSA-1-800 BRSA-1-1000 BRSA-1-1200 BRSA-1-1400 BRSA-1-1600 BRSA-1-1800

15 25 50 100 150 200 300 400 500 600 800 1000 1200 1400 1600 1800

SOLID LOAD, LBS.

DIMENSIONS

A

B

C

D

27 39 83 160 31/2 21/2 71/8 3 242 293 442 585 782 925 41/2 47/8 11 43/8 1257 1565 1829 2131 1 7 4 /2 4 /8 11 43/8 2419 2662

E

F

/2

2 17/8

1

G

/4 31/4 23/8

3

/4 31/4 23/8

3

64


PTFE PIPE SLIDE

FIG. 950

PIPE ANCHOR

FIG. 950A MATERIAL: FINISH: SERVICE:

FEATURES: ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Pipe slides come with PTFE bonded base. Black, electro or hot-dipped galvanized. An economical support designed for welding or clamping to the pipe. Slides permit horizontal movement due to expansion and contraction. Anchors restrain pipe movement. PTFE slides have a low coefficient of friction and require no lubrication. Specify pipe size, figure number, type and finish. MSS SP-58 Type 35

PIPE SIZE

A

B

C

2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 24

4 4 4 4 4 4 4 4 4 4 4 4 6* 6* 6*

5 /16 57/16 53/4 6 61/4 613/16 75/16 85/16 93/8 103/8 11 12 13 14 16

53/8 513/16 6 61/4 61/2 71/16 79/16 811/16 97/8 103/4 113/8 123/8 131/2 141/2 161/2

3

• * Indicates fabricated tee. • 3/32” Teflon bonded to 10ga plate. • Add 9/32” to height for slides. • Gusset are 1/4” thick

65


FIG. 960

SLIDE PLATES MATERIAL: FINISH: SERVICE:

ORDERING: APPROVALS:

Carbon steel or 304/316 stainless steel. Slide plates come with PTFE bonded base. Black, electro or hot-dipped galvanized. Slide plates must be attached to supporting beam or structure by bolting or tack welding. They are not structural members in themselves. Use only with PTFE Pipe Slide. TYPE A: Base support for pipe slides. Wider and longer pads can be furnished for heavier loads and greater movement. TYPE B: Supports pipe slides where only axial movement is allowed. Acts as a horizontal restraint in one direction. TYPE C: Supports pipe slides where horizontal movement on one plane is desired and the pipe may have a tendency to buckle or rotate. Specify size, type, figure number, if bolted or welded and finish. Specify hole size if bolt down base is required. MSS SP-58 TYPE 35

TYPE A BASE SIZE

A

B

F

4 6 12 18 24

8 /2 101/2 161/2 221/2 281/2

7 9 15 21 27

4 6 12 18 24

1

TYPE B BASE SIZE

A

2 - 16 81/2 18 - 24 101/2

B

F

7 9

4 6

TYPE C BASE SIZE

A

2 - 16 8 /2 18 - 24 101/2 1

B

C

F

7 9

4 /4 63/4

4 6

66

3


COPPER TUBING SPLIT RING HANGER

FIG. CT100 MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS: TUBE ROD SIZE SIZE “A”

Malleable iron. Copper epoxy coated (COPPER-GARD). For suspension of non-insulated stationary tubing lines. Specify tube size and figure number. MSS SP-58 TYPE 12 FS WW-H-171E TYPE 25 B

C

WEIGHT PER MAX REC. 100, LBS. LOAD, LBS.

D

3 9 7 /4* /8 /16 13/4 /8 7.3 180 3 5 3 /8* /8 /8 1 /4 11/16 8.0 180 1 3 11 /2 /8 /16 17/8 11/8 8.7 180 3 3 13 /4 /8 /16 21/4 13/8 9.6 180 3 15 1 /8 /16 21/2 15/8 12.8 180 3 11/4 /8 11/16 27/8 17/8 14.1 180 3 11/2 /8 13/16 3 23/16 17.9 180 3 2 /8 17/16 31/2 211/16 22.9 180 1 21/2* /2 17/8 415/16 27/16 44.9 300 1 3* /2 21/8 51/2 41/16 66.3 300 1 4* /2 25/8 65/8 51/16 75.3 300 1 3 1 *Sizes /4”, /8”, 2 /2”, 3” and 4” are hinged style only 1 3

COPPER HANGER FLANGE

FIG. CT105 MATERIAL: FINISH: SERVICE: ORDERING:

Malleable iron. Copper epoxy coated (COPPER-GARD) For attaching hanger rod to wood beams, ceilings, walls or floors. Specify tap size and figure number.

ROD SIZE “A”

B

C

/8 - 16 /2 - 13

13/8 13/8

23/4 23/4

3 1

D

E

/16 /16

111/16 111/16

7 7

SCREW SIZE WEIGHT PER “F” 100, LBS.

#12 #12

18 18

67


FIG. CT110

COPPER TUBING ADJUSTABLE SWIVEL RING HANGER MATERIAL: FINISH: SERVICE:

ORDERING: TUBE SIZE

MATERIAL SIZE

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6

16ga x 5/8 16ga x 5/8 16ga x 5/8 16ga x 5/8 16ga x 5/8 16ga x 5/8 16ga x 7/8 16ga x 7/8 16ga x 7/8 16ga x 7/8 14ga x 1 14ga x 1

1 3

FIG. CT115

Carbon steel. Copper plated. For suspension of non-insulated, stationary tubing lines. Approved for use without additional locking nuts normally required with pipe hangers. Specify tube size and figure number. ROD SIZE

A

B

C

D

E

WEIGHT PER 100, LBS.

/8 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2

2 13/4 2 2 21/16 21/8 25/16 21/2 23/4 25/8 31/4 31/4

/8 /8 7 /8 7 /8 7 /8 7 /8 11/8 11/8 11/8 11/8 11/8 11/8

13/4 13/4 11/4 11/4 11/8 11/4 13/8 13/8 11/2 11/2 2 21/8

27/8 23/4 23/4 27/8 3 33/8 35/8 41/4 43/8 411/16 511/16 61/4

31/4 33/16 33/16 37/16 33/4 45/16 51/4 53/4 65/16 67/8 83/8 91/2

9 9 10 10 11 15 22 24 28 30 80 116

3 3

7 7

COPPER TUBING BAND HANGER MATERIAL: FINISH: SERVICE: ORDERING: TUBE SIZE

MATERIAL SIZE

/2 16ga x 7/8 /4 16ga x 7/8 1 16ga x 7/8 11/4 16ga x 7/8 11/2 16ga x 7/8 2 16ga x 7/8 21/2 14ga x 1 3 14ga x 1 31/2 13ga x 1 4 13ga x 1 5 11ga x 11/4 6 11ga x 11/4

Carbon steel. Copper plated. For suspension of non-insulated, stationary tubing lines. Specify tube size and figure number. A

B

C

E

F

WEIGHT PER 100, LBS.

/8 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2 1 /2 5 /8 5 /8

25/16 23/16 21/16 21/16 29/16 25/8 33/16 37/16 41/4 41/8 41/8 51/2

25/8 25/8 25/8 211/16 37/16 311/16 41/2 5 6 61/8 611/16 87/8

19/16 17/16 15/16 15/16 113/16 17/8 213/16 27/16 31/4 31/8 3 41/4

13/8 11/4 11/8 11/16 11/4 11/16 11/4 11/8 15/8 13/8 113/16 21/4

11 12 12 13 14 18 30 32 46 47 97 109

1

3

3

3

68


COPPER TWO HOLE TUBING STRAP

FIG. CT120 MATERIAL: FINISH: SERVICE: ORDERING: PIPE SIZE

PIPE OD

/4 /8 1 /2 3 /4 1 11/4 11/2 2

0.375 0.500 0.625 0.875 1.125 1.375 1.625 2.125

1 3

Carbon steel or solid copper. Copper plated. For use where tubing is to be held directly to a flat surface. Specify tube size and figure number. A

B

C

MATERIAL SIZE

WEIGHT EACH, LBS.

/16 /16 3 /16 3 /16 3 /16 3 /16 7 /32 7 /32

13/4 17/8 21/8 23/8 27/8 31/8 35/8 41/4

11/8 11/4 11/2 15/8 21/4 21/2 23/4 33/8

20ga x 1/2 20ga x 1/2 20ga x 1/2 20ga x 1/2 20ga x 1/2 20ga x 1/2 18ga x 3/4 18ga x 3/4

0.01 0.01 0.01 0.02 0.02 0.04 0.05 0.06

3 3

FIG. CT145 MATERIAL: FINISH: SERVICE: ORDERING:

COPPER PERFORATED HANGER STRAPPING

Carbon steel or solid copper. Copper plated. For use in various light duty applications. Specify size and figure number. Available in 10’, 50’, and 100’ coils.

SIZE

LENGTH

WEIGHT PER 100, LBS.

/4 x 22ga Copperized /4 x 20ga Copperized 1 /2 x .030 Solid Copper 3 /4 x .030 Solid Copper

10’, 50’, 100’ coils 10’, 50’, 100’ coils 10’, 25’, 100’ coils 10’, 25’, 100’ coils

6 7.5 5 7.5

3 3

69


FIG. CT200

COPPER TUBING CLEVIS HANGER MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS: TUBE BOLT SIZE

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 1 3

FIG. CT420

/4 /4 1 /4 1 /4 1 /4 1 /4 1 /4 1 /4 5 /16 5 /16 3 /8 3 /8 1 1

Carbon steel. Copper plated. For the suspension of stationary copper tubing lines. Specify tube size and figure number. FS WW-H-171E TYPE 12

MATERIAL SIZE UPPER LOWER

18ga x 7/8 18ga x 7/8 18ga x 7/8 18ga x 7/8 18ga x 7/8 14ga x 7/8 12ga x 13/16 12ga x 13/16 12ga x 13/16 11ga x 13/16 8ga x 11/4 8ga x 11/4

18ga x 7/8 18ga x 7/8 18ga x 7/8 18ga x 7/8 18ga x 7/8 16ga x 7/8 14ga x 13/16 14ga x 13/16 14ga x 13/16 14ga x 13/16 8ga x 11/4 8ga x 11/4

A

B

C

/8 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2 1 /2 1 /2 5 /8 5 /8

17/8 13/4 113/16 21/8 21/2 215/16 47/8 41/2 43/4 57/8 57/8 61/16

23/16 21/8 25/16 23/4 31/4 4 53/4 61/8 61/2 77/8 83/4 9

3 3

E

F

1 11/8 /2 1 1 /2 1 11/16 /2 3 15/16 /4 13/4 15/16 23/16 11/16 33/8 21/16 37/16 2 11 13 3 /16 1 /16 43/4 29/16 43/4 15/8 43/4 11/2

COPPER TUBING RISER CLAMP MATERIAL: FINISH: SERVICE: ORDERING: APPROVALS: TUBE SIZE

/2 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 1 3

A

Carbon steel. Copper plated. For support of tubing risers. Specify tube size and figure number. MSS SP-58 TYPE 8 FS WW-H-171E TYPE 8 STOCK SIZE

B

611/16 111/16 7 2 83/4 21/4 9 21/2 3 9 /8 27/8 915/16 33/8 101/2 4 11 47/16 123/16 51/8 125/8 59/16 141/8 71/8 15 8

11ga x 1 11ga x 1 11ga x 1 11ga x 1 11ga x 1 8ga x 1 8ga x 1 8ga x 1 8ga x 11/4 8ga x 11/4 3ga x 11/2 3ga x 11/2

70

BOLT SIZE

WEIGHT EACH, LBS.

MAX REC. LOAD, LBS.

/4 /4 1 /4 1 /4 1 /4 3 /8 3 /8 3 /8 3 /8 3 /8 1 /2 1 /2

.48 .50 .64 .66 .68 1.06 1.08 1.16 1.58 1.66 3.42 3.76

225 225 250 250 500 500 500 500 500 500 815 815

1 1

WEIGHT EACH, LBS.

MAX REC. LOAD, LBS.

.12 .12 .12 .12 .18 .24 .58 .60 .66 1.02 1.68 1.84

150 250 250 250 250 250 350 350 350 400 550 550


STRUT

FIG. H132 MATERIAL: FINISH: ORDERING:

Carbon steel or 304/316 stainless steel. Pre-galvanized (ASTM-A653) or epoxy coated green. Specify size, figure number, length and finish.

15/8” X 15/8” X 15/8” X 12ga 9 /16” X 11/8” Slot 2” On centers 189 Lbs. per 100 feet

STRUT NUT

FIG. SN MATERIAL: FINISH: ORDERING: ROD SIZE

/4 /8 1 /2 5 /8 3 /4 7 /8 1 3

Carbon steel or 316 stainless steel. Electro-galvanized. Specify size with or without spring and figure number.

WITHOUT SPRING STD. WEIGHT PKG. EACH, LBS.

WITH SPRING STD. WEIGHT PKG. EACH, LBS.

100 100 100 100 100 100

100 100 100 50 50 50

.06 .09 .09 .13 .13 .13

.07 .10 .10 .13 .13 .13

FIG. SPC

STRUT PIPE CLAMP

FIG. STC

STRUT TUBE CLAMP

MATERIAL: FINISH: ORDERING:

Carbon steel or 304/316 stainless steel. Electro-galvanized or copper plated. Specify pipe/tube size and figure number.

PIPE SIZE

O.D.

STEEL GA

STD. PKG.

WEIGHT EACH, LBS.

TUBE SIZE

O.D.

STEEL GA

STD. PKG.

WEIGHT EACH, LBS.

/8 /2 3 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8

.675 .840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625

16 16 14 14 14 12 12 12 12 11 11 11 10 10

100 100 100 100 50 50 50 50 50 25 25 20 20 BULK

.12 .13 .15 .18 .22 .32 .37 .42 .49 .65 .69 .82 1.07 1.33

/8 /2 3 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8

/2 /8 7 /8 11/8 13/8 15/8 21/8 25/8 31/8 35/8 41/8 51/8 61/8 81/8

16 16 16 16 14 14 12 12 12 12 11 11 10 10

100 100 100 100 100 100 50 50 50 50 25 25 25 BULK

.08 .09 .11 .13 .16 .19 .31 .36 .42 .56 .61 .73 .92 1.21

3 1

3 1

1

5

71


LOAD RATING THREADED ROD/MAX SPACING NOMINAL ROD DIA.

ROOT AREA THREAD

/8 1 /2 5 /8 3 /4 7 /8 1 11/8 11/4 11/2 13/4 2

.068 .126 .202 .302 .419 .552 .693 .889 1.293 1.744 2.300

3

ROD SIZE

650° F

750° F

610 1130 1810 2710 3770 4960 6230 8000 11630 15700 20700

540 1010 1610 2420 3360 4420 5560 7140 10370 14000 18460

ROD SIZE AS DETERMINED BY PIPE SIZE 21/2 to 31/2 in. inclusive 4 and 5 in. 1 5 /2 in. /8 in.

/4 to 2 in. inclusive 3 /8 in.

3

PIPE SIZE

MAXIMUM SAFE LOAD, LBS. ROD TEMPERATURE

6 in. /4 in.

8 to 12 in. inclusive 7 /8 in.

3

MAXIMUM SPACING BETWEEN PIPE SUPPORTS PIPE SIZE, IN. MAXIMUM SPAN, FT. WATER AIR & STEAM

1

/2

3

/4

5

6

1

1

1 /2

2

21/2

3

31/2

4

5

6

8

10

12

14

16

18

20

24

7

9

10

11

12

13

14

16

17

19

22

23

25

27

28

30

32

9

11

13

14

15

16

17

19

21

24

28

30

32

35

37

39

42

TUBING SIZE MAXIMUM SPAN, FT.

1

/2

3

/4

1

11/2

2

21/2

3

31/2

4

5

6

6

8

9

10

10

11

12

PIPE CHART SCHEDULE NO. WALL DESIGNATION THICKNESS - IN. PIPE - LBS./FT. WATER - LBS./FT.

SCHEDULE NO. WALL DESIGNATION THICKNESS - IN. PIPE - LBS./FT. WATER - LBS./FT.

1” PIPE SIZE - 1.313” O.D. 40 80 160 STD. XS .133 .179 .250 1.68 2.17 2.84 .37 .31 .23

11/2” PIPE SIZE - 1.900” O.D. 40 80 160 STD. XS .145 .200 .281 2.72 3.63 4.86 .88 .77 .61

XXS .358 3.66 .12

40 STD. .140 2.27 .65

11/4” PIPE SIZE - 1.660” O.D. 80 160 XS .191 .25 3.00 3.77 .56 .46

XXS .400 6.41 .41

40 STD. .154 3.65 1.46

2” PIPE SIZE - 2.375” O.D. 80 160 XS .218 .343 5.02 7.44 1.28 .97

72

XXS .382 5.22 .27

XXS .436 9.03 .77


PIPE CHART 21/2” PIPE SIZE - 2.875” O.D. 40 80 160 STD. XS .203 .276 .375 5.79 7.66 10.01 2.08 1.84 1.54

SCHEDULE NO. WALL DESIGNATION THICKNESS - IN. PIPE - LBS./FT. WATER - LBS./FT.

WALL DESIGNATION THICKNESS - IN. PIPE - LBS./FT. WATER - LBS./FT.

SCHEDULE NO. WALL DESIGNATION THICKNESS - IN. PIPE - LBS./FT. WATER - LBS./FT.

SCHEDULE NO. WALL DESIGNATION THICKNESS - IN. PIPE - LBS./FT. WATER - LBS./FT.

SCHEDULE NO.

5” PIPE SIZE - 5.563” O.D. 40 80 120 STD. XS .258 .375 .500 14.62 20.78 27.4 8.66 7.89 7.09

PIPE - LBS./FT. WATER - LBS./FT.

SCHEDULE NO. WALL DESIGNATION THICKNESS - IN. PIPE - LBS./FT. WATER - LBS./FT.

SCHEDULE NO. WALL DESIGNATION THICKNESS - IN. PIPE - LBS./FT. WATER - LBS./FT.

XXS .636 22.85 2.53

160 .625 32.96 7.33

8” PIPE SIZE - 8.625” O.D. 40 60 80 100 120 STD. XS .277 .322 .406 .500 .593 .718 24.70 28.55 35.64 43.4 50.9 60.6 22.18 21.69 20.79 19.8 18.8 17.6 30

30

WALL DESIGNATION THICKNESS - IN.

XXS .552 13.7 1.07

31/2” PIPE SIZE - 4.000” O.D. 40 80 STD. XS .226 .318 9.11 12.51 4.28 3.85

SCHEDULE NO.

.330 43.8 49.7

40 STD. .216 7.58 3.2

12” PIPE SIZE - 12.750” O.D. 40 80 100 STD. XS .375 .406 .500 .687 .844 49.6 53.5 65.4 88.5 107.3 49.0 48.5 47.0 44.0 41.6

XXS .750 38.55 5.62

140

160

XXS .812 .875 .906 67.8 72.4 74.7 16.7 16.1 15.8

120

140

160

1.000 1.125 1.312 125.5 139.7 160.3 39.3 37.5 34.9

16” PIPE SIZE - 16.0” O.D. 30 40 80 100 120 140 160 STD. XS .312 .375 .500 .843 1.031 1.218 1.438 1.593 52.4 62.6 82.8 136.5 164.8 192.3 223.6 245.1 80.5 79.1 76.5 69.7 66.1 62.6 58.6 55.9 20

20 STD. .375 78.6 126.0

20” PIPE SIZE - 20.0” O.D. 30 40 60 80 100 XS .500 .593 .812 1.031 1.281 104.1 122.9 166.4 208.9 256.1 122.8 120.4 115.0 109.4 103.4

120

140

160

1.500 1.750 1.968 296.4 341.1 379.0 98.3 92.6 87.9 73

3” PIPE SIZE - 3.500” O.D. 80 160 XS .300 .438 10.25 14.32 2.86 2.35

XXS .600 18.58 1.80

40 STD. .237 10.79 5.51

4” PIPE SIZE - 4.500” O.D. 80 120 160 XS .337 .438 .531 14.98 18.96 22.51 4.98 4.48 4.02

XXS .674 27.54 3.38

40 STD. .280 18.97 12.51

6” PIPE SIZE - 6.625” O.D. 80 120 160 XS .432 .562 .718 28.57 36.39 45.3 11.29 10.3 9.2

XXS .864 53.2 8.2

30

40 STD. .307 .365 34.24 40.5 34.98 34.1

20

30 STD. .312 .375 45.7 54.6 60.92 59.7

20 STD. .312 .375 59.0 70.6 102.8 101.2

20 STD. .375 94.6 183.8

10” PIPE SIZE - 10.750” O.D. 60 80 100 120 XS .500 .593 .718 .843 54.7 64.3 76.9 89.2 32.3 31.1 29.5 28.0

140

1.000 1.125 104.1 115.7 26.1 24.6

14” PIPE SIZE - 14.0” O.D. 40 80 100 120 XS .438 .500 .750 .937 1.093 63.4 72.1 106.1 130.7 150.7 58.7 57.5 53.2 50.0 47.5

18” PIPE SIZE - 18.0” O.D. 30 40 60 80 XS .438 .500 .562 .750 .937 82.1 93.5 104.8 138.2 170.8 99.9 98.4 97.0 92.7 88.5

24” PIPE SIZE - 24.0” O.D. 40 60 80 100 120

160

140

160

1.250 1.406 170.2 189.1 45.0 42.6

120

160

1.375 1.781 244.1 308.5 79.2 71.0

140 XS .500 .687 .968 1.218 1.531 1.812 2.062 125.5 171.2 238.1 296.4 367.4 429.4 483.1 180.1 174.3 165.8 158.3 149.3 141.4 134.5

160 2.343 541.9 127


TERMS OF SALE

AGREEMENTS: All agreements are subject to strikes, accidents or other causes beyond our control. Prices and designs are subject to change without notice. TAXES: The buyer is liable for any Federal or State taxes, imposed on the seller. WARRANTY: We guarantee for one year from date of shipment our manufactured products to the extent that we will replace those having manufacturing defects when used for the purpose which we recommended. If goods are defective, the amount of damage is the price of the defective goods only and no allowance will be made for labor or expense of repairing defective goods or damage resulting from the same. We warrant the products we sell of other manufacturers to the extent of the warranties of their respective maker. RETURNS: Permission to return standard stocked merchandise must be obtained in writing. Credit will be issued subject to the following: 1.

Return freight charges must be prepaid.

2.

All material must be in first-class condition and in box quantities on arrival at our plant; if not, reconditioning costs will be deducted from the credit.

3.

Credit will be allowed on the basis of the price charged less a minimum handling charge of 20% and less any out-bound freight allowed or paid by us.

4.

Special, non-stocked, redesigned and made to order merchandise is Non-Returnable.

5.

Dated materials are not returnable 30 days beyond date of invoice.

COPPER COATING: Hangers and supports with this finish are specifically designed for use with copper tubing. Coating is for product size identification only and is not intended for corrosion resistance. Reference MSS SP-58, 13.2 PLASTIC COATING: Some products offered by National are plastic or vinyl coated for prevention of galvanic reaction between materials or for noise reduction. These coated products can also be used where contact between glass pipe and hanger is not desirable. HEAT TREATING: Hangers and supports should be stress relieved before hot-dipped galvanizing. TERMS AND DESIGN: Subject to change without notice, refer to current price list for terms of sale. CLAIMS: No claims for shortages allowed unless made in writing within ten (10) days of receipt of goods. All material sent out will be carefully counted and packed. Claims for goods damaged or lost in transit should be made to the carrier as our responsibility ceases on delivery to the carrier.

National Pipe Hanger Corporation reserves the right to make specification changes without notice. While every effort has been made to assure the accuracy of information contained in this catalog at the time of publication, we cannot accept responsibility for inaccuracies resulting from undetected errors or omissions.

Copyright Š 2013 National Pipe Hanger - All Rights Reserved July 2013


200 CAMPUS DRIVE, R.R. 30 MOUNT HOLLY, NEW JERSEY 08060 (609) 261-5353 FAX: (609) 261-3249

8411 OLD MARLBORO PIKE UPPER MARLBORO, MARYLAND 20772 (301) 568-8805 FAX: (301) 967-1456

WWW.NATIONALPIPEHANGER.COM


Nphcatalog  

National Pipe Hanger Corporations Comprehensive Pipe Hanger Catalog

Advertisement
Read more
Read more
Similar to
Popular now
Just for you