WYNDHAM CITY GATEWAY PROPOSAL
SITE PLAN CUSTOM METAL PANEL
panel-to-panel joinery detail LED LIGHT
(for the 1:50 model, LED lights are used. for 1.1 construction,type of light to be advised)
GALVANIZED STEEL ANGLE WITH THREADED BOLT
WALL west side, giving the driver a glimpse of Wydham before entering the gateway
An overhead roof in the middle section to intensify the experience of the gateway through encapsulation
NOTE: 100 mm steel bar will run through along each longitudinal panel, welded to a steel plate in the foundation, embedded in a strip concrete footing.
The third section opens up the driver as he approaches Wyndham/Melbourne
form. Moving the slider changes the number of rectangles per panel and the number of panels per ground area.
The progression of the form follows the concept of open-close-open.
Light receds as driver exits the gateway, signifying the end of the hateway experience
Panels of different numbers shows the changing shapes of the form as one progresses along the gateway. The position and affect of lights depends on the form of the panel.
Direct light facing the driver
PANEL 28 metal panel reduces glare
ROOF PANEL 131 The middle section is then further manipulated to form a section roof over the highway
The single element is then split into two, further twisting and manipulating to get the ideal shape. The southern wing are reduced in length to minimize intrusion to the middle section.
The third section are lifted vertically to form the starter wings greeting drivers into the municipality