Issuu on Google+

ASPF Multi-Position Air Handler with Energy-Saving Motor 1½ to 5 Tons

Standard Features • Suitable for use with refrigerants R-410A and R-22 • Check flowrater expansion device for cooling and heat pump applications • EEM fixed-speed motor • Enhances the performance of your Goodman air conditioner or heat pump • Multi-position — upflow, downflow or horizontal • Built-in coil has horizontal, vertical, and downflow drain pans with secondary drain connections • Complies with the Factory-sealed Air Handling Credit as listed in the 2001 Florida Building Code, Chapter 13, Section 610.2.A.2.1 • AHRI Certified • ETL Listed

Cabinet Features • Fully insulated, painted steel cabinet with attractive Architectural Gray finish • Built-in filter rack for 1” filter (filter not included) • Low-voltage cabinet connections • Power supply on top • Low-voltage entry on top or side • Factory-sealed to achieve 2% or less leakage rate at 1.0” water gauge external duct static pressure

* Complete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the 10-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in California or Québec.

SS-GASPF

www.goodmanmfg.com

7/10

Supersedes 2/10


Product Specifications

Nomenclature A 1

S 2

P 3

F 4

2405 5,6,7,8

1 9

6 10

Brand A Single-piece Air Handler

Engineering * Major/ Minor Revisions * Not used for inventory management

Unit Application C Ceiling Mount PSC Motor D Downflow PSC Motor E Multi-Position Variable-Speed Motor R Multi-Position PSC Motor S Multi-Position EEM Motor W Wall Mount PSC Motor Cabinet Finish U Unpainted P Painted N Uncased Expansion Device F Flowrater T Expansion Valve

2

AA 11,12

Refrigerant Charge No Digit = R-22 only 6 = R-410A or R-22 Electrical 1 208/240 V, 1 Phase, 60 Hz Nominal Capacity Range @ 13 SEER Multi-Position & Downflow Applications 1729 1½ to 2½ Tons (for Export Systems) 1830 1½-3½ Tons 3642 3-3½ Tons Ceiling Mount & Wall Mount Applications (Nominal Cooling Capacity/ Electric Heat kW) 1805 1½ Tons Cooling/ 5 kW Electric Heat 2405 2 Tons Cooling/ 5 kW Electric Heat 3608 3 Tons Cooling/ 8 kW Electric Heat

www.goodmanmfg.com

SS-GASPF


Product Specifications

Specifications ASPF 183016

ASPF 303616

ASPF 313716

ASPF 426016

Cooling (BTU/h)

18,000 - 30,000

30,000 - 36,000

30,000 - 36,000

42,000 - 60,000

CFM (High/ Low)

1,085 / 650

1,350 / 600

1,350 / 600

2,000 / 1,040

9½”

10⅝”

10⅝”

10¹⁵/₁₆”

Width

8”

10⅝”

10⅝”

10¹¹/₁₆”

Coil Drain Connection FPT

¾”

¾”

¾”

¾”

Liquid

⅜”

⅜”

⅜”

⅜”

Suction

¾”

⅞”

⅞”

⅞”

208 / 230

208 / 230

208 / 230

208 / 230

Electric Heat Capacity (kW)

5, 8, 10

3, 5, 6, 8, 10, 15, 20, 21

3, 5, 6, 8, 10, 15, 20, 21

10, 15, 20, 21

Min Circuit Ampacity

3.6 / 3.6

3.8 / 3.8

3.9 / 3.9

6.6 / 6.6

15 / 15 amps

15 / 15 amps

15 / 15 amps

15 / 15 amps

197 / 253

197 / 253

197 / 253

197 / 253

2.9 / ½

3.0 / ¾

3.1 / ¾

5.1 / ¾

125

176

176

195

Nominal Ratings

Blower Diameter

Service Valve

Electrical Data Voltage

Max. Overcurrent Device Min. / Max VAC Blower Motor FLA/ HP Ship Weight (lbs)

SS-GASPF

www.goodmanmfg.com

3


Product Specifications

Dimensions

Model

4

A

B

C

D

E

F

G

H

I

J

ASPF183016

46¾”

22”

17½”

19½”

10”

14½”

11¹⁵/₁₆”

17⅛”

17¹⁵/₁₆”

2”

ASPF303616

53¼”

24”

20”

22”

12”

19⅝”

11¹⁵/₁₆”

19⅝”

19¹⁵/₁₆”

1¹³/₁₆”

ASPF313716

53¼”

24”

20”

22”

12”

19⅝”

11¹⁵/₁₆”

19⅝”

19¹⁵/₁₆”

1¹³/₁₆”

ASPF426016

53¼”

24”

20”

22”

12”

19⅝”

11¹⁵/₁₆”

19⅝”

19¹⁵/₁₆”

1¹³/₁₆”

www.goodmanmfg.com

SS-GASPF


Product Specifications

Blower Performance Model

ASPF183016

ASPF303616

ASPF313716

ASPF426016

CFM deliverd against External Static Pressure

Motor Speed Tap

0.1”

0.2”

0.3”

0.4”

0.5”

Low (T1)

700

670

650

595

510

Med-Low (T2)

820

785

765

745

705

Medium (T3)

920

900

850

840

815

Med-High (T4)

1,075

1,055

1,015

975

960

High (T5)

1,130

1,115

1,085

1,040

1,000

Low (T1)

1,060

865

600

515

420

Med-Low (T2)

1,105

910

795

745

690

Medium (T3)

1,165

1,070

1,020

960

915

Med-High (T4)

1,285

1,240

1,195

1,140

1,100

High (T5)

1,435

1,395

1,350

1,315

1,265

Low (T1)

1,060

865

600

515

420

Med-Low (T2)

1,105

910

795

745

690

Medium (T3)

1,165

1,070

1,020

960

915

Med-High (T4)

1,285

1,240

1,195

1,140

1,100

High (T5)

1,435

1,395

1,350

1,315

1,265

Low (T1)

1,445

1,275

1,175

940

855

Med-Low (T2)

1,545

1,405

1,325

1,260

1,145

Medium (T3)

1,660

1,610

1,555

1,490

1,415

Med-High (T4)

1,905

1,870

1,810

1,750

1,695

High (T5)

2,115

2,070

2,000

1,965

1,915

Notes: • Assumes dry coil with filter in place; SCFM correction for wet coil = 4% • All ASPF models are shipped from the factory with the speed tap set on T4.

SS-GASPF

www.goodmanmfg.com

5


6

www.goodmanmfg.com

XFMR-C

C

PU

WH

BL

BK

RD

BK

BL

SEE NOTE 2

L1

RD

NO NC

EBTDR

COM

GR

RD

RD

CR

BL

7 A BL

B

1

4

Wiring is subject to change. Always refer to the wiring diagram or the unit for the most up-to-date wiring.

IF REPLACEMENT OF THE ORIGINAL WIRES SUPPLIED WITH THIS ASSEMBLY IS NECESSARY, USE WIRE THAT CONFORMS TO THE NATIONAL ELECTRIC CODE.

BL

RD

WH

BR

L2

RD

BL

SEE NOTE 3

RD

PLF

PLM

TERMINAL BLOCK SHOWN FOR 50HZ MODELS ONLY

R C G W1 W2 Y1 Y2 O DH 1 2 3 4 5

GR

RD

BK RD

FL

FL

BK

M2

BK

RD

R

M1 M4

M3

PU

RD

WH

BL

BK

RD

BK

9

8

7

6

5

4

3

2

1

PLM

TWO (2) ELEMENT ROWS

RD

HTR1 TL

HTR2 TL

L1

BK

RD

L2

HTR2 TL

HTR1 TL

BK

L2

RD

M2

BK

M2

M1

YL

R2

BL

RD

BK

WH

PU

BR

RD BL

BK

9

8

7

6

5

4

3

2

1

PLM

THREE (3) ELEMENT ROWS

RD

YL

R1

M4

M3

RD

HTR3 TL

M1

BK

L1

YL

FL

FL

FL

L1

BK

RD

L2

RD

RD

2

2

BK

RD

L2

3

3

C

BK

Warning

BK

1

1

BK

L1

BL

5

1

L1

RD

4

3

RD

BR

5

5

240

RD

BL

TR

BK

7

7

BL

8

8 9

9

C LGN

EM

12345

OR BR YL

WH PU

SEE NOTE 4

SEE NOTE 1

WH

6

6

EQUIPMENT GROUND USE COPPER OR ALUMINUM WIRE

TR

5

5

3

GREEN PURPLE BROWN WHITE

A

WIRING CODE

2

7

CR

Notes: 1) Red wires to be on transformer terminal "3" for 240 volts and on terminal "2" for 208 volts. 2) See composite wiring diagrams in installation instructions for proper low voltage wiring connections. 3) Confirm speed tap selected is appropriate for application. If speed tap needs to be changed, connect red wire from terminal 4 of CR relay to appropriate tap at TB 4) Brown and white wires are used with Heat Kits only.

TRANSFORMER FEMALE PLUG CONNECTOR MALE PLUG CONNECTOR FUSE LINK THERMAL LIMIT HEAT ELEMENTS

FACTORY WIRING HIGH VOLTAGE LOW VOLTAGE FIELD WIRING HIGH VOLTAGE LOW VOLTAGE EVAPORATOR MOTOR TR TERMINAL BOARD PLF RELAY PLM FL CONTROL RELAY TL ELECTRONIC BLOWER TIME DELAY RELAY HTR

COMPONENT CODE EM TB R CR EBTDR

4 PLF

B

SEE NOTE 1

L2 PLM 2 PLF

R C G W1 W2 Y1 Y2 O DH 1 2 3 4 5

6

24V

2

COLOR CODE

4

1

EM

C L GN

GR BK BLACK RD RED PU YL YELLOW BR BL BLUE WH

1 PLF

1 PLM

L1

208/240 VOLTS

HTR3 TL

HTR2 TL

HTR1 TL

M2

4

L2

RD

BL BK

M6

M5

PU

BK

BL

YL

R2

M8

M7

BL

RD

WH

BR

RD BL

BK

C

1 2 3 4 5

G

C

EM

XFMR-C

XFMR-R R

9

8

7

6

5

4

3

2

1

PLM

NO NC

0140A00034

EBTDR

COM

FOUR (4) ELEMENT ROWS

RD

YL

R1

M4

M3

BK RD

HTR4 TL

M1

BK

FL

FL

High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death.

24V

2

BL

4

4

GRD

FL FL

BL

YL

NOTE: WHEN INSTALLING HEATER KIT, ENSURE SPEED TAP DOES NOT EXCEED MINIMUM BLOWER SPEED (MBS) SPECIFIED FOR THE AIRHANDLER/HEATER KIT COMBINATION ON THIS UNIT'S S&R PLATE. AFTER INSTALLING OPTIONAL HEAT KIT, MARK AN "X" IN THE PROVIDED ABOVE. MARK ACCORDING TO NUMBER OF HEATER ELEMENT ROWS INSTALLED. NO MARK INDICATES NO HEAT KIT INSTALLED.

9

8

7

6

5

4

3

2

1

PLM

ONE (1) ELEMENT ROWS

RD

G

RD

BK

M2

M1

XFMR-R R

L2

BK

R

HTR1 TL

COPPER OR ALUMINUM POWER SUPPLY (SEE RATING PLATE) USE MIN. 75°C FIELD WIRE

GR

BL

L1

BK

FL

Product Specifications

ASPF****AA Wiring Diagrams

SS-GASPF


Product Specifications 

ASPF****(B,D)A Wiring Diagrams 

 FL

FL FL

FL HTR2 TL

FL

HTR1 TL

HTR1 TL

BK

RD

HTR2 TL

FL

RD

PLM

1

1

BK

RD

HTR3 TL

FL

PLM

HTR3 TL

BK

BK

2

BK

HTR2 TL

FL

HTR1 TL

PLM

BK

HTR1 TL

FL FL

BK

YL

HTR4 TL

1

PLM

BL BK

RD 2

PU BK

3

RD

BL

YL

PU 4

M1

R

BK RD

5

M2

M1

3

RD BL

M1

M4

4

M1

YL

R2

R1

BK RD

RD

BR WH

3

BL

M2

RD

5

M3

M2

M4

M5

M7

M6

M8

R1 6

RD BL

R2

BR

4

5

BK

BK

6

RD

RD

WH

6

7

7

BK

8

BL

BK

BK

BK

RD

M2

5

M4 WH

7

BK

RD

M3

2

PU

BL

4

M3

M2

6

BK

BK M1

R WH

PU

3

BL

1

2

YL

RD

7

YL 8

RD

YL

BK

8

RD

9

BL BK

9

8

RD

9

9

L1

L2 L1

ONE (1) ELEMENT ROWS

L2

L1

TWO (2) ELEMENT ROWS

L2

L1

L2

THREE (3) ELEMENT ROWS

L1

L2

L1

L2

FOUR (4) ELEMENT ROWS

NOTE: WHEN INSTALLING HEATER KIT, ENSURE SPEED TAP DOES NOT EXCEED MINIMUM BLOWER SPEED (MBS) SPECIFIED FOR THE AIRHANDLER/HEATER KIT COMBINATION ON THIS UNIT'S S&R PLATE. AFTER INSTALLING OPTIONAL HEAT KIT, MARK AN "X" IN THE PROVIDED ABOVE. MARK ACCORDING TO NUMBER OF HEATER ELEMENT ROWS INSTALLED. NO MARK INDICATES NO HEAT KIT INSTALLED.

TERMINAL BLOCK SHOWN FOR 50HZ MODELS ONLY

SEE NOTE 2

R C G W1 W2 Y1 Y2 O DH 1 2 3 4 5



L2

L1

EQUIPMENT GROUND USE COPPER OR ALUMINUM WIRE

208/240 VOLTS

GRD

BK

RD

PLM

1

2

3

4

5

6

7

8

9

PLF

1

2

3

4

5

6

7

8

9

BK

RD

BL

BR

WH

L1

L2 PLM 2

1 PLM EM

RD

GR BR

1 PLF

C L GN

PLF

SEE NOTE 4

WH BL

1

2

3

4

24V

5

5

SEE NOTE 1

TR

3

RD

2

FUSE HOLDER

WH PU CR

BK  

4 RD

2

5

1

3

RD

C

1

2

3

5

24V

4

COLOR CODE BK BLACK GR GREEN RD RED PU PURPLE YL YELLOW BR BROWN BL BLUE WH WHITE

BL BL

BL

1 2 3 4 5

BL RD

WH PU

FUSE HOLDER

COPPER OR ALUMINUM POWER SUPPLY (SEE RATING PLATE) USE MIN. 75°C FIELD WIRE

EM

C L GN BK

COMPONENT CODE

OR BR YL

12345

RD

EM

C

R C G W1 W2 Y1 Y2 O DH 1 2 3 4 5

240

BL

RD

4 PLF

SEE NOTE 1

TR GR

5

4 CR

RD BK

WH

6

2

1

BL

IF REPLACEMENT OF THE ORIGINAL WIRES SUPPLIED WITH THIS ASSEMBLY IS NECESSARY, USE WIRE THAT CONFORMS TO THE NATIONAL ELECTRIC CODE.

EM TB R CR EBTDR

WIRING CODE FACTORY WIRING HIGH VOLTAGE LOW VOLTAGE FIELD WIRING HIGH VOLTAGE LOW VOLTAGE

EVAPORATOR MOTOR TR TERMINAL BOARD PLF RELAY PLM FL CONTROL RELAY TL ELECTRONIC BLOWER TIME HTR DELAY RELAY

TRANSFORMER FEMALE PLUG CONNECTOR MALE PLUG CONNECTOR FUSE LINK THERMAL LIMIT HEAT ELEMENTS

Notes: 1) Red wires to be on transformer terminal "3" for 240 volts and on terminal "2" for 208 volts. 2) See composite wiring diagrams in installation instructions for proper low voltage wiring connections. 3) Confirm speed tap selected is appropriate for application. If speed tap needs to be changed, connect purple wire from terminal 4 of CR relay to appropriate tap at TB 4) Brown and white wires are used with Heat Kits only.

0140A00037 REV B



Wiring is subject to change. Always High Voltage: Disconnect all power before servicing or installing this unit. Multiple power refer to the wiring diagram or the arning sources may be present. Failure to do so may cause property damage, personal injury, or death. unit for the most up-to-date wiring. 

 ⚡

W





  

SS-GASPF













www.goodmanmfg.com















             





 

7


Product Specifications

Accessories Heat Kit Selection HKR-03* HKR-05*, HKR-05C* HKR-06* HKR-08*, HKR-08C* HKR-10*, HKR-10C* HKR-15C* HKR-20C* HKR-21C* ^ HKR3-15* ^ HKR3-20*

Single Point Kit ** ASPF 183016 X X X X¹ X¹ X²

ASPF 303616 X X X X¹ X¹ X² X² X² X² X²

ASPF 313716 X X X X¹ X¹ X² X² X² X² X²

ASPF 426016 X X X X X X¹ X¹

Model SPW-01

HKR-15C

HKR-20C

HKR-21C

X

X

X

** Must be installed along with any of the above compatible heat kits. This kit will fit any ASPF air handler as long as a compatible heat kit is installed in the unit.

Filters

X¹ X¹

* Revision level that may or may not be designated C Circuit breaker option ^ Heat kit requires three-phase power supply ¹ Air handler must be on speed tap 2, 3, 4, or 5 ² Air handler must be on speed tap 4 or 5.

ASPF

Filter #

Qty Required

1830 3036 4260

FIL-36-42 FIL 48-61 FIL 48-61

1 1 1

Expansion Valve Kits for Air Conditioning and Heat Pump Applications Kit Number XVB18-36C XVB42-60C XV18-36C XV42-60C TX2N2 TX3N2 TX5N2 TX2N4 TX3N4 TX5N4

Description

Application

Refrigerant

20% Bleed Valve 20% Bleed Valve Non-bleed Valve Non-bleed Valve Non-bleed Valve Non-bleed Valve Non-bleed Valve Non-bleed Valve Non-bleed Valve Non-bleed Valve

AC Only AC Only AC Only AC Only AC or HP AC or HP AC or HP AC or HP AC or HP AC or HP

R-22 R-22 R-22 R-22 R-22 R-22 R-22 R-410A R-410A R-410A

Drain Pan Insulation Kits Downflow Applications

Chassis Size Small (15½”) Medium (19½”) Large (22”)

Tonnage: Outdoor Unit 1½ - 3 Ton 3½ - 5 Ton 1½ - 3 Ton 3½ - 5 Ton 1½ - 2 Ton 2½ - 3 Ton 3½ - 5 Ton 1½ - 2 Ton 2½ - 3 Ton 3½ - 5 Ton

Horizontal Applications Insulation Kit DPI18-30/20 DPI36-42/20 DPI48-60/20

Note: Each kit contains enough material to modify 20 coils

Chassis Size Small (15½”) Medium (19½”) Large (22”)

Insulation Kit DPIH18-32 DPIH36-42 DPIH48-61

Note: Each kit contains enough material to modify 20 coils

Goodman Manufacturing Company, L.P., reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations. © 2010 • Goodman Manufacturing Company, L.P. • Houston, Texas • Printed in the USA.

8

www.goodmanmfg.com

SS-GASPF


SS-GASPF