MyTana Winter Catalog 2023

Welcome to MyTana and a new year.

2023 will bring new and exciting ways we can help you expand your capabilities and improve your work flow. Look for new products that offer you more power and efficiencies than ever before—with the same quality of construction you count on.

In this issue, we introduce you to our partner in rehab Pipeline Renewal Technologies. If you are considering adding relining or pipe repair to your lineup, PRT is a great resource offering industry-leading equipment for LED-based UV Cure, reinstatement and point repair.

We look forward to continuing our partnership with you, here's to a great year!

MyTana’s inspection cameras and locators help you identify problems lurking in sewer and drain lines, and know where they’re located. Manufactured with high-quality materials and precise workmanship, our inspection systems deliver industryleading clear, wide-angle footage.

Camera heads and push-rods are built to hold up in harsh environments, and everything is housed on rugged frames. Digital recording makes it easy to share footage with your customers.

With models suitable for work in 1½” to 12” lines, all are designed to be highly portable, accurate and easy to use. And all are backed with factory direct service and support.

Our inspection systems feature

Field-tested tough camera heads

– clear, wide-angle view

– self-levelling on midsize and larger systems

– low-friction guides navigate over and around obstacles

– 512Hz transmitter built-in

Powered by household current or battery (rechargeable)

Daylight-readable monitors

– LED brightness control – digital footage counter (n/a on DrainTracker)

All-digital recording – record to internal memory, USB drive or stream wirelessly to your mobile device (DrainTracker records to SD card only)

Rugged yet lightweight frames

– grab-and-go ease on smaller systems – agile maneuverability and compact size on our larger systems

Durable push rod resists kinking – field replaceable on mid-size and mainline systems

Replacement parts and additional products:

Locators pg 8

Accessories pg 9 Parts pg 9

Drain Cameras

for 1½" - 6" lines

Grab-and-go inspection systems integrate the monitor, controls and push-rod in lightweight yet rugged frames.

Push-rod guides help with feed and rewind.

Camera necks are flexible to get around bends.

Two on-board USB ports.

DrainTracker for 11/4" - 2" lines

This sinkline camera has a super-flexible 1/4" push rod, making it ideal for use in S- and P-traps. Its color camera head has adjustable LED illumination, and a built-in 512Hz sonde. A 5" daylight-readable monitor is integrated just above the controls and the unit records to SD card (included). Remote control lets you view and manage recordings. Powered with household current or rechargeable battery (included).

MSA-NG2 for 11/2" - 3" lines

Mini Stand-Alone

Inspection System

This lightweight, one-piece inspection system is built for ease of transport and clear images.

Color, fixed-position 11/16" dia. camera head has a 512Hz transmitter built-in. Record to flash drive, internal 64 GB drive or stream video wirelessly. Monitor shows digital footage counter. Powered with household current or rechargeable battery (included).

MS11-NG2 for 3" - 6" lines

Mid-Sized Inspection System

The MS11-NG2 is a versatile system that delivers crystalclear images from 3" to 6" lines. Add the optional MS11+ Combo Kit (below) to inspect 11/2" to 2" lines as well.

The detachable, self-levelling camera head has a 512Hz transmitter built-in. Durable push rod has a low-friction coat to deter catching and can be replaced in the field. A daylight readable monitor is integrated on the frame and displays a digital footage counter. Record to flash drive, internal 64 GB drive or stream footage wirelessly. Powered with either household electric current or rechargeable battery (included).

MS11+ for 11/2" - 3" lines

COMbo Kit

Requires the MS11-NG2 system

Includes a mini camera head that is inter-changeable with the MS11-NG2 mid-size camera head, and a protective case for both heads and all the guides. Older MS11-NG2 models with an affixed camera head can be rewired so it can swap out with this mini camera head. Call for details.

HEAD Color .75" dia. fixed-position MONITOR 5" daylight-readable PUSH ROD 50’ mini push-rod FRAME Powder-coated aluminum SIZE 6.5" W × 15" L × 14" H

OP WT 15 lbs

INCLUDES SD Card, remote control

HEAD Color, 11/16” dia. fixed-position MONITOR 61/2” daylight-readable PUSH ROD 100’ mini push-rod FRAME Powder-coated aluminum SIZE 12" W × 16" L × 17" H

OP WT 25 lbs

INCLUDES USB flash drive WiFi Router SnoBall guide

HEAD Color, 11/2” dia. self-leveling MONITOR 61/2” daylight-readable PUSH ROD 150' or 200' FRAME Powder-coated aluminum SIZE 13"W × 20" L × 21"H

OP WT 43 lbs (200' push rod)

INCLUDES USB flash drive WiFi router Dialectic grease set of Ice Ball camera guides 11/2”, 17/8”, 21/4” O.D.

HEAD Color, 11/16" dia. fixed-position

CASE SIZE 14" × 12" × 5"

ALSO INCLUDED

Protective SnoBall guide 3" O.D. Ice Ball

A slot for everything included with the MS11-NG2 (above)

Mainline

Large 12" daylight-readable monitor has LED brightness control and a digital footage counter. Control panel is water resistant, and the screen is shatter resistant. All-digital recording to internal or removable drive, wiFi streaming. 2 USB ports.

Compatible with the Mini Push Cam (opp page) for small line inspection.

PGR200 for 3" - 8" lines

Mainline Inspection System

Get 200’ of push-rod and the CBX17 Control Box (see below left) to capture and record clear imagery from 3"- 8" lines. The detachable, self-levelling camera head has a 512Hz transmitter built-in. Durable push-rod has a smooth, low-friction coat that reduces catches. It is housed on a compact, rugged reel frame. A reel brake with adjustable drag assists feeding and rewinds. The push-rod can be replaced in the field.

The PGR200 is powered with either household electric current or rechargeable battery.

PGR400 for 4" - 12" lines

Municipal Inspection System

Manhole to manhole inspection with up to 400' of push-rod and CBX17 Control Box. Durable, field replaceable push-rod resists kinking, and is housed on the rugged reel frame. The detachable, self-levelling camera head has a 512Hz transmitter built-in, and the CBX17 offers all-digital recording (see below left). Powered with either household electric current or on-board rechargeable battery.

Includes camera centering skid.

Ice Ball Camera Guides

Our Ice Balls protect and guide the camera head over and around obstructions, letting debris pass by. Interchangeable in the field, no tools needed.

The larger 2 ¼” and 3” Ice Balls are great for jumping offsets!

HEAD Color, 11/2” dia. self-leveling MONITOR CBX17 Monitor/Control Box 12” daylight readable screen

PUSH ROD 200’

FRAME Powder-coated steel SIZE 19” W × 32” L × 40” H (without CBX17 mounted)

OP WT 68 lbs (w/o-) | 81 lbs (w/ CBX17 )

INCLUDES Removable USB drive WiFi Router set of 4 Ice Balls

PUSH

The Inspect and Locate Package

Bundle the PGR200 with our locator, line transmitter and the mini push cam for complete diagnostic capability. See MyTana.com/packages for more information.

HEAD Color, 11/2” dia. self-leveling

MONITOR CBX17 Monitor/Control Box 12” daylight readable screen

PUSH ROD 325’ or 400’

FRAME Powder-coated steel

SIZE 19” W × 32” L × 40” H (without CBX17 mounted)

OP WT 98 lbs (w/o- ) | 111 lbs (w/ CBX17 )

INCLUDES Camera skid, removable USB drive, WiFi router, 4 Ice Balls

Mini Push Cam $4,110

MSA-PCAM

Customize your system–we can cut the push rod to a length you specify. Call for information!

Requires MyTana monitor/control box. Has 100' push rod and a mini camera head to inspect smaller lines using the monitor included with our mainline systems. See MyTana.com/mini-push-cam for details. Options to work with both our digital and analog systems

Reel Splash Covers

Clamshell shaped covers for our PGR push-rod reels. Help prevent drips and keep debris contained. Removes easily with covered zipper, hose down to clean.

PGR200 Cover $119 PGR200-0101

PGR400 Cover $146 PGR400-0108

MT 512+ Locator

The MT 512+ Locator detects 512Hz signal from sondes and all MyTana cameras in all pipes including cast iron. It can also find 640Hz, 815Hz, 8kHz and 33kHz frequency sondes.

This is an update to our previous RL8873 model and features:

– a large daylight-readable LCD display which provides relevant data including continuous /real-time depth estimate, signal strength, directional arrows, and an alignment compass

– a user friendly interface with audio signals

Partner with the MT LineFinder Transmitter (below) to work with even more frequencies and operating modes to trace buried utilities. By Rycom for MyTana.

BAG SIZE 6" W × 34" L × 13” D

POWER Lithium-ion battery (rechargeable)

INCLUDES Charging cord Carry bag

LineFinder Transmitter

Expand the locating capabilities of the MT 512+ with this multi-frequency Transmitter. Find buried power cables, CATV cables, gas and water pipes, sewer lines, telephone cables, or fiber optic cables with sheath. A multi-channel processor offers simultaneous field detection from multiple antenna arrays to ensure accuracy.

If you are unsure where a drain line goes, use our MS11-NG2 or PGR system's push-rod as a conduit to trace the drain line.

Transmits with direct-connect clamps, clamps and ground rod included. Inductive couplers are available, call for information. By Rycom for MyTana.

BAG SIZE 18" W × 9" D × 10" H

POWER Lithium-ion battery (rechargeable)

INCLUDES Direct connect clamps Ground rod Charging cord Carry bag

Remote Sonde

$391 CV RT512

Strong 512 Hz transmitter for locations up to 20’ deep. From Rycom.

– Compatible with the MT 512+ Locator

– 3/8” x 24 fine thread, mates with standard male end threads (like our push rod right)

– Powered by single AAA battery

Sonde Push Rod

$168

SONDE PUSH ROD

120' with threaded fitting that mates with a sonde. Smooth playout and rewind.

Camera Accessories

CBX17 Monitor/Control Box $4,763

Replacement monitor/control box for our mainline systems. 12" monitor is daylight-readable with LED brightness control and footage counter.

All-digital recording to internal memory or USB drive (2 ports), stream footage wirelessly to your device (Android or iOS).

Model ACB-18 is compatible with older MyTana analog systems and brings digital recording. $4,763

parts Inspection Systems

Replacement Camera Head

11/2" dia. color, self-leveling camera head, for use in 3"- 8" pipes. Includes 3 Ice Balls. Styles available for our digital MS11-NG2 and PGR systems, and our older Classic (analog) systems.

Replacement Push Rod

See more online at Mytana.com

Tiger Tail

Protect your push rod

Protects camera push rod from sharp edges on cleanouts, elbows, offsets and joints. Durable, crush proof material, even in sub-zero temperatures! 3’ length.

Tiger Tail opening size Price Part#

11/2" dia $42 TT115

2" dia $48 TT200

3" dia $61 TT300

Clarifii Solution $20 Helps prevent fog on outside of camera lens. 15ml bottle.

JS CLARIFII

Digital Systems $3,275 CAM 1-1/2 NGX

Classic Systems $3,275 CAM 1-1/2 CL

Specify style– indicated by the push-rod connector

Quality MyTana push rod for our newer inspection systems with detachable camera heads. Replaceable in the field. Push rod for older systems also available, please call or visit MyTana.com.

Camera Guides – Navigation Aids

IceBalls

Translucent, polycarbonate light-ring covers fit our 11/2" dia. camera head. Interchangeable.

SnoBall

Fits our 11/16" dia. mini-camera head.

PGR Systems–200' $1,361 MT PUSHROD NGX 200

PGR Systems–400' $2,333 MT PUSHROD NGX 400

MS11-NG2–150' $1,102 AY MS11 PROD DET 150

MS11-NG2–200' $1,361 AY MS11 PROD DET 200

1 1/2" O.D. $35 NGIB-1

1 7/8" O.D. $64 NGIB-SLMB

2 1/4" O.D. $84 NGIB-2

3" O.D. $91 NGIB-3

13/4" O.D. $55 SNB-MBLK

Camera Skid Fits our 11/2" dia. camera head. Skids that fit our older 15/8" or 21/8" heads are also available, see MyTana.com.

$210 SKD-NG

Purple: mainline (PGR) pushrod White: mid-size (MS11-NG2) push rod

21/4" O.D. 3" O.D. 11/2" O.D. 17/8" O.D.

MyTana.com

Our family of portable jetters are built to get you where you need to go with the cleaning power you need.

Suitable for 1½” to 10” lines, they’re ergonomically designed with the highest quality pumps and motors on frames that withstand rugged use.

Electric models clear blockages from smaller lines and their lower flow makes them ideal for dealing with ice and grease. Partner our gas models with a specialty nozzle and take on roots or hardened blockages without damaging the pipe.

for 11/2" - 4" lines

High-quality

wide

of nozzles round out

can focus on effective jetting.

for 11/2" - 6" lines

Pulse valves on all our jetters – assist in tight bends and working through blockages

Thermal protection on pumps and motors

Electric

M20T

M20

Quality pump with pressure regulator

M20T

The TrapBlast

for 11/2" - 2"

lines

The M20T is the M20 without the cart, although a cart can be added later. The carry handle makes it suitable for residential jobs and tight spaces, and it has a small footprint.

The beefy, 2 hp industrial motor with thermal protection lets the pump deliver 2.1 gpm to pull the hose through small lines. A 1/4 turn trap valve controls water flow. We offer this model with 1/8" hose.

MOTOR 2 hp electric CAPACITY 2 + GPM at 1,500 PSI

SIZE 14” W x 24” L x 13” H

BASE WT 82 lbs

BASE PRICE

$2,316 no hose or nozzles

PRICE

Include 50’ of 1/8” high-pressure hose $2,424

M20T Nozzle Kit: Cornering, Penetrating, Blind Thrust – 1/8” NPT JE NK M20T add $131

Transport Cart 20TCart add $1,258

M20 for

The FastBlast

11/2"

- 4" lines

The M20 is a versatile electric jetter with the same pump and motor as the M20T, but we include a transport cart so you can transport the pump/motor along with larger or longer hose in one trip.

The pump/motor unit removes easily from the cart if you need to work in tighter spaces.

A heavy-duty, 2 hp industrial motor with thermal protection lets the pump deliver 2.1 gpm at 1,500 psi even with the 1/4" hose. Control water flow with either a 1/4 turn trap valve near the pump, or a ball valve on the reel. The M20 is ideal to tackle frozen lines.

The cart has a loading wheel and 10" pneumatic tires. Glides assist with going up and down stairs.

Convenience, built-in.

Our electric jetters have quick disconnect fittings where you hook up hoses often. An inline GFCI moves the bulky housing away from the plug for easier wall outlet connection.

MOTOR 2 hp electric CAPACITY 2 + GPM at 1,500 PSI SIZE 20” W x 32” L x 39” H

BASE WT 128 lbs

BASE PRICE

$3,447 no hose or nozzles

Include reel, 50’ of 1/8” hose and 115’ of 1/4” hose $3,786

Suggested set of nozzles: Cornering, Penetrating, Blind Thrust – 1 ea of 1/8” NPT and 1/4” NPT JE NK M20

add $274

Nozzles

Our Hex nose nozzles with steep 15° rear jets give you excellent pulling power and good cleaning with lower gpm jetters, see page 19.

We offer many more nozzles for smaller lines, including convenient Nozzle Kits to get you started. See pages 18-22.

includes 50' jumper hose on a detachable reel for remote jetting

M30 with reel and hose MV84

Gas Jetters

Tackle roots, harder incrustations, rubble and more.

M30 shown with optional reel, 115’ x 1/4" hose, reel stand and jumper hose MV84

MS84 model has a skid mounted jetter unit, no wheels

Honda motors

Both the M30 and MV84 have a reliable Honda motor to power the pumps. Electric start and EZ start bypass.

Covered by Honda’s 3 year warranty.

M30

The MaxBlast

for 11/2" - 6" lines

Our M30 MaxBlast gives you more power–and range–without sacrificing maneuverability.

A reliable Honda motor and efficient pump are both housed on a rugged cart that goes anywhere. Automatic throttle down and auto choke help the motor operate efficiently.

Features: – Thermal protection on pump, pulse-abler valve

– EZ start by-pass 10 AMP recharge system

– Auto low oil shut off

– Deflector shield protects motor from drips, remove for access

– 10” pneumatic tires

– Remove the hose reel for indoor jetting

MV84

Dual Cart Jetter

for 3" - 10" lines

The MV84 delivers 8 gpm at 4,000 psi to efficiently clean and clear 3" to 10" lines, and excels at clearing roots in 3" to 6" lines. A powerful Honda motor is equipped with remote start/stop and throttle control.

Dual carts: a wheeled jetter cart and a separate hose cart are connected with a 50’ jumper hose to allow indoor jetting or access to hard-to-reach areas.

Jetter cart – Super duty triplex pump, positive displacement

– 12-gallon supply buffer tank keeps up with 8 gpm flow

– Accessible pressure unloader and pulse controls

– Hand brake stabilizes jetter during operation

– Antifreeze Kit included for winter or low-use maintenance

Hose cart

– Ball valve on reel provides on-off water flow

– Crank handles on reel fold flat for storage

Nozzles

Use a nozzle suited for the job to get the best performance from your jetter.

See pages 18-22.

MOTOR 390 CC Honda motor w/ electric start covered by Honda’s 3 year warranty

CAPACITY 4.5 GPM at 3,000 PSI SIZE 21” W x 32” L x 48” H

BASE WT 190 lbs

BASE PRICE $5,421 no hose or nozzles

PRICE

Include reel, 2 high-pressure hoses and reel stand – 75’ of 1/8” hose and 200’ of 3/8” hose – 50’ jumper hose $6,069

Suggested set of nozzles: cornering, penetrating, blind thrust – 1 ea of 1/8” NPT and 3/8” NPT JE NK M30

add $282

Pressure Washer Wand WW-KIT see pg 17 add $149

MOTOR 800 CC Honda motor w/ electric start covered by Honda’s 3 year warranty

CAPACITY 8 GPM at 4,000 PSI

SIZE Jetter Cart: 38”L x 29”W x 42” H Hose Cart: 22” L x 26” W x 48” H

BASE WT Jetter 300 lbs | Hose cart 150 lbs

MV84 – both hose and jetter carts have wheels

– 250’ x 3/8” high-pressure hose – 50’ jumper hose – set of nozzles (cornering, penetrating, blind thrust)

BASE MODELS Include hoses, nozzles and remote control. See prices below.

PRICE

$11,620

MS84 – hose cart has wheels, jetter cart is skid-mounted – 250’ x 3/8” HP hose – 50’ jumper hose – set of nozzles (cornering, penetrating, blind thrust) $11,350

Diversify your jetting services with our jetter accessories

Be ready for ice or grease with the Hot Box hot water jetting unit.

Additional hose reels let you have larger or smaller hose ready to go on your truck.

Our Washer Wand gives you power washing capability, and is great to hose down cable reels.

Carts and Reels

Small Hose Reel / Caddy $761 MVRL-SM

Compatible with the Hose Reel and Cart (right). Also acts as caddy, with carry handle and rubber feet.

Hose Reel and Cart

$1,316 MVRL-LG

Rugged cart with XL hose reel. Holds 250' of 1/2" hose or 300' of 3/8" hose. Small hose reel (left) can be added later.

Hose Reel w/ Handle $470 MTR-SML

Portable hose reel. Holds 125' of 3/8" hose or 200' of 1/4" hose.

Complete

Reel

Cart $2,070 MVRL-CT

Both the Small Hose Reel and Hose Reel Cart (left) with 3' jumper hose. This cart ships with the MV84 (and older model MV80).

Hose Caddy $509 CMSM100

Accommodates 1/8" or 1/4" hose. Can also hold up to 100' of 3/8” hose. Large Hose Reel $444 RLCOM-2 Has elbow, ball valve and mounting stem. Includes locking pin. Holds up to to 200' of 3/8" hose.

Reel Stand and Handle $281 RLCST-1

2 piece set. Holds our large hose reel (left, not included). Great for remote jetting, this set is included with our M30.

Jetter Accessories

RealTite Plugs CP-Replacement Cleanout Plugs

Seal damaged cleanout openings and broken threads with the ONLY plug in the industry that will not come apart.

Complies with National Standard Plumbing Code and meets or exceeds ASTM Standards for permanent plug usage. Easy installation with our Hex Key tool.

6 sizes available, from 1.5" to 4". See page 43 or MyTana.com for more information and pricing.

Folding Ramp $1,063

RAMP FOLDCOM

Extra Wide – Heavy Duty

Great for your heavy equipment, water heaters and more! Ramp surface has texture for traction.

29 3/8" W x 71/2' L, folds to 47" L x 8" thick for easy storage. 350 lb capacity. Longer ramps available, call for pricing.

Tiger Tail

Extend the life of your jetter hose

Tiger Tail opening size Price Part#

11/2" dia $42 TT115

2" dia $48 TT200

3" dia $61 TT300

Hot Box $4,295

Partner with the M30 to melt away ice and grease Works with a Jetter unit, hot water stays downstream from the pump.

– 5 GPM up to 180°F

– Kerosene or diesel fuel

– Requires high-temp hose and 115V AC (15 AMP)

Insulated Gloves $10 ea

JE GLOVE RED

Order a dozen– SAVE $12!

Heavy-duty, waterproof gloves for handling jetter hose. Improves your grip and protects your skin from harsh chemicals and sewage. Insulated.

12" length. One size fits all.

Hydraulic Drain Flusher

Open clogged drains with water pressure Reuseable canvas flush bag expands to prevent back flow. Garden hose fittings.

For use on drains up to: Price Part#

11/2" dia. $52 HFB150 21/2" dia. $61 HFB250

3" dia. $88 HFB300

4" dia. $113 HFB400

Antifreeze Kits

MV84 Kit $100 AFK84

Hose assembly designed for our MV84 or MV80 jetters. Delivers antifreeze to pump and hoses including bypass hose.

Standard Antifreeze Kit $70 AFK13

5 gal bucket with return port on cover, 6' hose and 1/4 turn spigot.

4" to 6" dia. $145 HFB600

includes jumper

hose

Pressure Washer Wand $149

WW-KIT

36” sprayer with 5 nozzles. For use with our M30 (4.5gpm) or M20 (2.1 gpm) jetters (specify model when ordering).

Nozzles with Drilled Orifices

Drilled orifice nozzles are inexpensive, but wear quickly especially if not maintained. Keep yours clean with our Tip Cleaners, see page 22.

Button Nose Nozzles

Pentrating Thrust

Excellent pulling power while penetrating blockages to establish flow in a blocked pipe. Good for general drain cleaning, good in elbows and tees.

Blind Thrust Clean at a greater distance with maximum pulling power. Good for general drain cleaning.

Cornering Ideal for tight turns and elbows, good flushing action and reasonable pulling power.

For general drain cleaning

Monster Flusher

Dual rear angles create a wide area of turbulence keeping sand, gravel and debris suspended while cleaning a pipe. Pulls well.

General Flusher Excellent flushing, good pulling power. Effective cleaning of pipe walls after flow has been established in a blocked pipe. Jets:

Hex Nose Nozzles

A mushroom shape allows for steep rear jet angles for more pulling power. Requires wrench tightening.

3/8" 1/8"

1/2"

Hex Super Thruster

Maximum pulling power with one forward jet to penetrate blockages.

Hex Blind Thruster

15° thrusting angle for maximum pulling. No penetrating jet.

Hex Degreasing / De-icing

Excellent pulling with 3 forward jets topenetrate grease or ice blockages.

Don't see what you need?

1/4"

Jets: 1 fwd @ 0° 4 rear @ 15°

Jets: 6 rear @ 15°

Jets: 3 fwd @ 10° 6 rear @ 15° NPT

PART NO. PART NO. PART NO.

1/8” 1,500 2.1 50' RHF18-2/1 $50 RHB18-2/1 $50 RHD18-2/1 $50 1/4” 1,500 2.1 150' RHF14-2/1 $54 RHB14-2/1 $54 RHD14-2/1 $54 3,000 4.5 150' RHF14-4/3 $54 RHB14-4/3 $54 RHD14-4/3 $54 3/8” 3,000 4.5 200' RHF38-4/3 $59 RHB38-4/3 $59 RHD38-4/3 $59 8 300' RHF38-8/3 $59 RHB38-8/3 $59 RHD38-8/3 $59 4,000 8 300' RHF38-8/4 $59 RHB38-8/4 $59 RHD38-8/4 $59 1/2” 3,000 8 300' RHF12-8/3 $65 RHB12-8/3 $65 RHD12-8/3 $65

Radial Nose Nozzles

Heavy weight nozzles ideal for larger jetters and jet-vac units. Smooth finish with wrench flats for tightening.

Radial General Thruster

For plugged lines or to utilize the maximum run capability of your system.

Radial Monster

A general purpose, dual angle nozzle. Thrust and flushing forces give superior pulling and cleaning.

Radial Flusher 35° flushing angle with good pulling power. An efficient general-purpose cleaning nozzle.

These charts show common nozzle specs which we stock. Many more are available, please let us know your hose length and gpm/psi needs.

Jets: 1 fwd @ 0° 4 rear @ 25°

1/2"

Jets: 1 fwd @ 0° 3 rear @ 45° 3 rear @ 25°

Jets: 6 rear @ 35°

Radial

Degreasing De-icing

25° flushing angle with 3 forward jets to loosen hard grease or ice.

Jets: 3 fwd @10° 6 rear @ 25° NPT PSI GPM HOSE PART NO. PART NO. PART NO. PART NO.

3K-4K 12 400’ RNG12-12/3 $85 RNM12-12/3 $85 RNF12-12/3 $85 RND12-12/3 $85

3K-4K 14 400’ RNG12-14/3 $85 RNM12-14/3 $85 RNF12-14/3 $85 RND12-14/3 $85

3K-4K 18 400’ RNG12-18/3 $85 RNM12-18/3 $85 RNF12-18/3 $85 RND12-18/3 $85

Specialized Forms

DeGreasing / De-Icing Nozzle

Flush grease or ice on shorter runs. Forward jets push debris forward while rear jets help clean the sidewalls. Limited pulling power.

Jets: 3 forward @ 10° 6 rear @ 45°

NPT PSI GPM HOSE PART NO.

1/8” 1,500 2.1 50' JND18-2/1 $47

1/4” 1,500 2.1 150' JND14-2/1 $50 3,000 4.5 150' JND14-4/3 $50

3/8” 3,000 4.5 200' JND38-4/3 $54 8 300' JND38-8/3 $54 4,000 8 300' JND38-8/4 $54

1/2” 3,000 8 300' JND12-8/3 $64

Drophead Nozzle

Designed for navigating P-Traps, vertical drops and tight bends other nozzles won’t reach. Choose brass or stainless steel (S/S).

Jets: 3 rear @ 45°

NPT PSI GPM PART NO.

1/8" 1,500 2.1 DHB18-2/1 (Brass) $66

1,500 2.1 DHS18-2/1 (S/S) $92

1/4” 1,500 2.1 DHB14-2/1 (Brass) $70 1,500 2.1 DHS14-2/1 (S/S) $96

Hose specs for drophead nozzles: 1/8" – 50' hose 1/4" – 150' hose Custom specs are not available on this nozzle.

Rotating Nozzle

A spinning head provides 360° of coverage. Use for finishing or polishing a pipe that has had some preliminary cleaning.

Jets: 2 side @ 90° 2 rear @ 45°

NPT PSI GPM HOSE PART NO.

1/4” 1,500 2.1 150' RJC14-2/1 $168 3,000 4.5 150' RJC14-4/3 $168 3/8” 3,000 4.5 200' RJC38-4/3 $212 3,000 8 300' RJC38-8/3 $212 1/2” 3,000 8 300' RJC12-8/3 $298

Warthog Nozzles

Warthog nozzles use controlled rotation technology to slow nozzle rotation giving the jets time to penetrate and break up deposits. Pressure options up to 5,000K deliver superior results in nearly all applications. Easily serviced for long-term use in the field.

Nozzles with Replaceable Inserts

Durable, powerful nozzles engineered to take on the toughest blockages. With regular maintenance and repair, they have a long life span, reducing the cost of ownership.

Whip hose inlet

4" - 8" lines 2" - 4" lines 3" - 6" lines

WV Classic

Navigate elbows in smaller lines to clear grease, fat, ice and fine roots. Low maintenance–no seals or bearings to service. WHWV-

Rotating Jets: 1 forward @ 15° 2 rear @ 55°

WT Classic

Cut roots, clear ice and blockages. Small form navigates pipe bends. 2 NPT sizes. New 1/2" size maximizes a larger pump’s capacity. WHWT-

Rotating Jets: 1 forward @ 15° 2 rear @ 30° (150°)

WS Classic

Easily remove grease, cut roots, clear ice and soil blockages

Standard head, with whip hose or jointed inlet option. Descaling head available, please call. WHWS-

Std Rotating Head Jets: 1 forward @ 15° 2 rear @ 30° (150°)

NPT 1/4” 3/8” 1/2” 1/2” PSI 1200-5000 3,000-4,000 3,000-4,000 3,000-4,000

Hose 115' 300' 300' 400' 400' GPM 3 to 8 8 to 12 12 to 20 12 to 20 12 to 20

PRICE $520 $905 $1,005 $1,357 $1,357

Whip Hose Inlet Jointed Inlet

enz® Nozzles

Manufactured for wear resistance and long life. Ceramic orifice inserts ensure they have outstanding durability, especially if working with less than clean water.

The rotating nozzles have a patented drive-and-brake design to limit the rotational speed while offering pressure vibrations which help disintegrate deposits.

Rotodrill REV

Powerful, rotating rear-facing jet propels the leading sharp edge to break through blockages. The jet then cleans and flushes debris when bringing it back. Gets around bends well. E-BR-

Jets: 1 rotating rear @ 7°

Rotodrill

Powerful oscillating front jet removes sludge deposits and clogs.

Excellent cutting – clear roots or ice, remove wet wipes. Push material forward. Gets around bends well. E-RD-

Jets: 6 rear @ 15° 1 rotating forward @ 7°

Chisel

4 front jets give a powerful forward attack as sharp edges cut, break and penetrate all blockages including roots or frozen lines.

Flush out at hydraulic thrust boring. E-CP-

forward @ 15°

rear @ 20° (3/8”)

25° (1/2”)

Jointed inlet

Ordering Nozzles These charts show common nozzle specs which we stock. Many more are available, please let us know your pump capacity, hose length and line size. Give us a call or complete form at mytana.com/nozzles.

Rotating forward jet blasts a cone of water up to 4,000 PSI.

6" - 18" lines

WH Classic

The industry standard for cutting roots and blockages. WHWHMany more specs are available on all the Warthog nozzles, please call to order.

Rotating Head Jets: 1 forward @ 15° 2 rear @ 30° (150°) 1/2" 3,000-4,000 2,000-3,000 400' 400' 12 to 20 24 $1,616 $1,616

Reaper Nozzles

A powerful multi-purpose nozzle. A rotating forward jet cuts, while the rear jets clean and flush. Heavy-duty construction—stainless steel housing and tungsten carbide seat and tip.

REAPER-

Jets: 3 or 4 rear @ 20° 1 forward @ 30° (rotating)

Jets: 4 rear @ 20° 1 forward @ 24° (rotating)

Jets: 4 rear @ 20° 1 forward @ 30° (rotating)

NPT New! 1/4” 3/8” 1/2”

PSI 1,500 - 4,000 1,500 - 4,000 1,500 - 4,000 GPM 6, 8 6, 9 12 to 18

PRICE $530 $760 $1,092

Grenade Bomb and Bulldog nozzles include an optional-use forward attack tip: screw in to help penetrate blockages or navigate bends.

Grenade Bomb

Bulldog Nozzles

Heavy duty nozzle with strong traction removes loose rubble, gravel and soft deposits. Pre clean before using a chain flail head or cutter. E-GBLo-Flow Effective performance even with flow as low as 6 gpm. E-BD-

Jets: 6 rear jets @ 25°

Jets on the rotating heads are designed for operation with recycled or fresh water, reducing transport and water costs. Remove grease, roots and harder deposits. Easy to handle, Bulldog nozzles are practically maintenance-free.

w/ KBR Head & Skid Suited for the removal of fat and soap E-BD050B

Chain Flails / Scrapers

The enz chain scraper efficiently removes lime-scale, cement slurry, roots and more. Use it to prepare for restoration work, such as relining, grouting or applying coatings.

MyTana.com

Nozzle maintenance, accessories and kits

Warthog nozzles

Reaper nozzles

Whip

Hose Assembly

$114 Replace broken or frayed hose on WS classic nozzle. 2' hose with 1/2" NPT fittings. WS-020-P8-K

Tip Cleaners

Centralizer for WS $164 41/2” diameter, for 5” or larger pipe. CENT WS

Centralizer for WH $299

51/2” diameter, for 6” or larger pipe. CENT WH

Keep your nozzles clean to get maximum performance from your jetter. These tip cleaners make cleaning orifices a snap!

Rotor Repair Kit $230.70

Repair your 3/8" or 1/2" Reaper nozzle in the field using the genuine Reaper parts included in this kit. Includes: rotor assembly, rubber boot, top insert, inlet screen, o-ring and seat retainer. Specify your nozzle size when ordering. 1003029-

Nozzle Kits

Nozzle tip cleaning tool $13

Multiple sizes of tips clean 1/8" to 1/2" nozzles, all in one case. NOZ-CLR

Individual tip cleaners $7 ea

White – for 3/8” and 1/2” nozzles TPC-45 Green – 1/8" and 1/4" nozzles TPC-35

An assortment of nozzles in a storage case. Includes tip cleaner.

Larger kits include: – Cornering – Blind Thrust – Penetrating Thrust – Monster Flusher

General Flusher

1/4" NPT Nozzle Kit $479 2 gpm @ 1,500 PSI NK14-21 4.5 gpm @ 3,000 PSI NK14-45

3/8" NPT Nozzle Kit $522 4.5 gpm @ 3,000 PSI NK38-4/3 8 gpm @ 3,000 PSI NK38-8/3 8 gpm @ 4,000 PSI NK38-8/4

1/2" NPT Nozzle Kit $646 8 gpm @ 3,000 PSI NK12

1/8" NPT Nozzle Kit $324 2 gpm @ 1,500 PSI NK18

Size

1/8" I.D.

1/4" I.D.

3/8" I.D.

1/2" I.D.

2-3 50 ft $90 JE HoseJet 02x50

2-3 75 ft $103 JE HoseJet 02x75

2-3 100 ft $110 JE HoseJet 02x100

2-3 150 ft $164 JE HoseJet 02x150

2-5 115 ft $206 JE HoseJet 04x115

2-5 150 ft $234 JE HoseJet 04x150

2-5 200 ft $295 JE HoseJet 04x200

4-8 200 ft $412 JE HoseJet 06x200

4-8 250 ft $522 JE HoseJet 06x250

4-8 300 ft $605 JE HoseJet 06x300

8-18 200 ft $790 JE HoseJet 08x200

8-18 250 ft $996 JE HoseJet 08x250

8-18 300 ft $1,195 JE HoseJet 08x300

8-18 400 ft $1,594 JE HoseJet 08x400

1/8" I.D.

1/4" I.D.

3/8" I.D.

8-18 500 ft $1,985 JE HoseJet 08x500

2-3 50 ft $122 JE HoseHT 02x50

2-3 75 ft $182 JE HoseHT 02x75

2-5 115 ft $286 JE HoseHT 04x115

2-5 200 ft $475 JE HoseHT 04x200

4-8 200 ft $707 JE HoseHT 06x200

$4.35 $4.95 $5.35 $5.60 Line up your hose to the picture to find your hose size Length Price PART NO 50 ft $164 JE HOSE JUMP 06x50 75 ft $308 JE HOSE JUMP 06x75 100 ft $361 JE HOSE JUMP 06x100

4-8 250 ft $863 JE HoseHT 06x250

$4.50 $5.10 $5.50 $5.75 Jetter Hose Standard High Pressure Hose Piranha brand hose includes 1 rigid and 1 swivel end (1/8" has 2 rigid) – Rated 4,000 PSI working pressure, 12,000 PSI burst pressure – Temperature rated to 150° F High-temp Jetter Hose Hoses include 1 rigid and 1 swivel end (1/8" has 2 rigid) – Ratings: – Temperature rated to 212° F Jumper Hose 3/8" NPT hose. Includes 1 rigid and 1 swivel end. Pressure rated 4K PSI.

Call for availability on custom lengths. Custom length hoses are non-returnable. Size 1/8" 1/4" 3/8" 1/2" Working pressure (psi) 5,075 5,000 3,500 3,000 Burst pressure (psi) 20,300 18,000 13,000 12,000 Socket Quick Connect Brass. 3/8" FPT fits jumper hose. $15 7103 B

4-8 300 ft $1,027 JE HoseHT 06x300

1/2" I.D. 8-18 300 ft $1,181 JE HoseHT 08x300

Jetters 23 PHONE: ( 866) 837-7972 EMAIL: mytana@mytana.com WEBSITE: MyTana.com

3/8" O.D. 1/2" O.D. 5/8" O.D. 3/4" O.D. 1/8" I.D. 1/4" I.D. Custom Length Price / Foot Custom Length Price / Foot

Compact high-pressure jetting units fit medium-duty commercial vehicles and clean lines up to 24”. Unblock and clean drains, smaller pipes and sewer lines; use for surface cleaning as well.

Both models deliver 15 gpm @ 4,000 psi and include a hand-held remote, pulse action and auto-engine start.

ROM units perform in the harshest environments around the world. Tried-and-trusted technology is engineered into every product while components are accessible for easy operation and maintenance.

EcoNomic

Hinged reel, rotating control panel

A hydraulic high-pressure hose reel swivels 225° and holds 300' of 1/2" hose. iRom control panel rotates with the hose reel as does the hinged hose guide. The second reel houses water fill hose.

$48,650

15 gpm @ 4,000 psi

Gas motor, 58 hp 160 gallon tank 300 ft of 1/2" pressure hose

ROM truck-mounted jetters feature

Engineering

– anti-vibration sub-frame

– compact size to leave room for the rest of your equipment

– take on plenty of water with stable road handling

Components

– low maintenance pumps with dry run protection

– electric start on engines

– 300 ft hose included, different lengths and sizes available

– swivelling, hydraulic high-pressure reels

Control

– iROM technology to control pressure and water flow

– daylight readable screens

– waterproof touch keys

– handheld remote

EcoFit

3 reels: including 2 swiveling hp hose reels

Maximum power and versatility with two hydraulic hose reels that swivel 270° along with the control panel.

Visit MyTana.com/rom or call for more information.

The main reel has 300' of 1/2" hose, and can hold up to 550' of hose. The 2nd reel can hold up to 300' of 1/2" hose. Each reel has a hose entry guide. A third reel houses the water fill hose.

$52,750

15 gpm @ 4,000 psi

Gas motor, 58 hp 305 gallon tank 300 ft of 1/2" pressure hose (main reel can hold up to 550')

Both models include a handheld remote, pulse action and auto engine start.

Get 2-hand cable control, SmartDrive torque management and the flexibility to work a variety of attachments, all in a grab-and-go package.

M224 for 2" - 4" lines

High-Speed Flexible Shaft Cleaner

Quickly and efficiently chew through roots, scale, grease and more in 2" to 4" lines.

The M224 has a robust internal motor to power the flex shaft cable while remaining exceptionally quiet. It allows you to always have two hands on the sturdy shaft so you can completely focus on the resistance coming from the blockage, while starting or stopping the machine with the foot pedal.

As you work, the SmartDrive™ electronic torque controller auto-adjusts the speed and torque limit to the obstruction in the line to help protect you and the shaft. No manual setting or adjustment is needed as you move from job to job.

Should you ever have damage to the flexible drive shaft, it can be repaired or replaced in your shop. A slip-joint fitting allows for quick swap out of attachments like our new one-piece chain-flails.

Transporting the M224 is easy with a luggage-style telescoping handle and wide-stance wheels. Non-skid feet stabilize the unit during operation.

MOTOR DC electric, 15 amp source

SPEED up to 1,580 rpm SIZE 11.5" W × 19" L × 21" H

OP WT 52 lbs

Includes – flexible shaft cable with slip-joint end – foot pedal and hose

Chain Flail

Unique one piece design prevents crushing of hardware. Carbide tips scrape and clean.

3 sizes, all include slip-joint fitting.

Flexible

DIA PART NO. 3" AY M224-1100 add $117 4" AY M224-1200 add $122 6" AY M224-1300 add $137

We help you fix pipes.

Municipal contractors depend on innovative technologies to be more profitable in pipeline rehabilitation.

Pipeline Renewal Technologies delivers that innovation to processes ranging from pipe point repair to relining and lateral reinstatement.

Cutting edge technology, combined with dependability and support, have made us the industry's partner of choice.

UV Cure

LED-based UV cure for CIPP that lets you cure faster, tackle challenging applications, and reduce costs and potential failures.

Rehab Cutters

Perform reinstatement and prep with multi-axis agility

Point Repair

For standalone point repair, or for pre-lining under high infiltration, Quick-Lock sleeves restore a pipe’s structural integrity and seal out groundwater. Caps finish off CIPP liner ends.

Equipment

Equipment only has value when it gives you a competitive advantage. Our philosophy of innovation focuses on your return-on-investment, emphasizing unique capabilities, superior productivity and low cost-of-ownership.

Rent, Lease or Buy

Depending on your budget, business objectives and the duration of time for which you need the capability a piece of equipment provides, we can offer rental or rent-to-own purchase options that minimize your risk, maximize your profit, and give you the confidence to expand your business as new opportunities allow.

A Team to Support Yours

Technology is only as good as the people who stand behind it. In the punishing world of pipe rehab, Pipeline Renewal Technologies stands committed to maximizing your competitive advantage; delivering superior training and support; and minimizing your downtime and cost-of-ownership.

View our product line on the following pages. Contact us anytime for more information or with any questions you have!

pipelineRT.com/contact

LED-based UV Cure

Cure felt and GFRP liners up to 4.92 fpm with no styrene

UV curing technology has produced thinner, stronger liners and given installers a simpler, faster and more reliable method for curing.

Flexible liners are able to smoothly cover bends, deformations and drastic diameter changes. No mixing, shelf life or working time considerations.

Can be wet out remotely or on-site.

SpeedyLight+

Cure Faster. Tackle Challenging Applications

SpeedyLight+ cures at speeds up to 4.92 fpm—close to five times faster than traditional technologies. Because it’s compatible with felt (as well as invertible glass fiber), SpeedyLight+ can cure 90-degree bends in lines down to 4”, as well as other challenging geometries like transitions and verticals.

Free of styrene and amines (and the associated odor), UV-based cure technologies like SpeedyLight+ raise fewer objections from the public and your crew.

The SpeedyLight+ reel holds 330' of 0.8" rigid elastic hose to carry power, video signal and compressed air (for head cooling and liner pressurization).

LINE SIZE 2"-16"

HOSE 328'

LINERS Felt, GFRP

HEADS (5) 100W – for 2"-3" pipe

300W – for 3"-6" pipe

400W – for 4"-8" pipe

800W – for 4"-12" pipe

1800W – for 6"-16" mainline pipe

SPEED Up to 4.92 fpm

CIPP Drums & Rollers

PRT’s CIPP accessories prepare you for efficient, complete and cost-effective trenchless rehabilitation. Our performance calibration rollers and drums are rugged, easy to operate and available in a variety of sizes.

Inversion Drums

Compact Design for Simpler CIPP

This line of inversion drums stands out for its portability and ease of use. Six drum sizes offer compatibility with many different sizes of liner. Perfect for UV cure, as well as steam, hot water or ambient cure, and a variety of applications.

With a wider access than other brands, they are designed for ease-of-use and maneuverability.

Liners and Resin

We'll help you choose the right lining materials for your CIPP project.

Liners and Calibration Tubes

Our quality felt liners and tubes curve, stretch and accommodate up to 90° bends, and are specifically developed for optimal results in a variety of applications and pipe configurations.

Electric Calibration Roller

A Clean, Complete Cure Every Time

Electric calibration rollers from PRT are the easy, worry-free way to evenly distribute resin through-out a liner. Precise height adjustment and roller spacing. Convenient foot pedal provides hands-free control of pull-through speed during saturation.

Manual Calibration Roller Small Dia.

For Rehab Pros on the Move

The Calibration Unit Micro features an ergonomic hand wheel and manual height adjustment, it is suitable for pipe up to 8” in diameter. The compact unit can be mounted on a table, or includes a handle for portability.

Resin

We offer odorless, styrene-free resin formulated for UV cure. Safe to use under basements, garages and behind the walls of commercial buildings.

Reinstatement Cutters

Air-driven, multi-axis cutters that power through any material

Rehab cutters from PRT deliver unmatched versatility and power, giving you the confidence to meet every challenge head-on. Whether you’re working in residential service lines, commercial laterals or grinding offsets in mainlines, PRT’s air-powered cutters get the job done.

Drive

Mainline cutter with powerful air-driven speed and torque for reinstating laterals or grinding offsets in mainlines. Self-cleaning, color camera.

LINE SIZE 6" - 16"

HOSE LGTH 492' PROPEL Self-propelled CONTROL Twin joystick / 3 axes

DISPLAY 10.1" tablet

Micro Automatic +

Automated inchworm-style movement has vertical climbing capability. Cutting power and a large viewing screen. Self-cleaning, color camera.

LINE SIZE 4" - 6" (8"-10" avail)

HOSE LGTH 164’ and 230' PROPEL Push CONTROL Joystick / 3 axes

DISPLAY 10.1” tablet

shown with the optional 90 DCX Angular Cutting Motor

Micro S Light+

The perfect tool to tackle lucrative small-diameter rehab work

This small-diameter cutter fits in small access openings and is suitable for a wide range of applications. Excellent flexibility in bends and perfect for both horizontal and vertical work. Joystick control offers three axes of motion: 400-degree rotation, 90-degree swivel and 4" axial feed. The sealed head carries an IP54 rating, accepts various cutting bits and detaches for easy transport.

LINE SIZE 4" - 6" (8" and 10" optional)

HOSE LENGTH 164'

PROPULSION Push

CONTROL Joystick / 3 axes

DISPLAY 10" monitor

CAMERA Self-cleaning, color

Nano

Compact model for small lines. Push horizontally or drop vertically, stabilize with remote-inflated air bladder. Snakes easily past bends.

LINE SIZE 3" - 4"

HOSE LGTH 82' PROPEL Push CONTROL Manual DISPLAY 3.5" LCD, img capture

Cutting Bits

We've got a wide assortment of bits to handle any situation. Call PRT to find out more.

Point Repair

Trenchless, structural pipe repair

For standalone point repair, or for pre-lining under high infiltration, these products restore a pipe’s structural integrity where vulnerable, and seal out groundwater.

Quick-Lock

Target failing pipes with a point repair sleeve that installs in minutes

Positioned by a crawler and expanded pneumatically with an air compressor, Quick-Lock’s rehab caps and sleeves provides structural, trenchless pipe repair and sealing. Heavy-gauge 316L stainless steel construction has infiltration abatement with an EPDM rubber gasket. Installs in minutes with minimal manpower and overhead. Quick-Lock is chemically resistant against sewage, thinned acids, lye, and aromatic and chlorinated hydrocarbons.

The patented locking system ensures that the sleeve stays permanently in position. After rehabilitation, the sleeve has its own static capability and absorbs the natural tectonic movements of the pipes.

Meets ASTM F3110-14 for mechanical trenchless point repair.

We’ve been building reliable cable machine workhorses for over 60 years. Our lineup tackles 1” to 10” lines with customizable cable styles, lengths and fittings.

All our models are designed to build torque quickly, while giving the operator sufficient time to react and work through obstructions. A spring and cleat mechanism lets you change reels quickly: add another section of cable for longer runs, or swap in a closed reel if your next job is indoors.

Cable loads into reels counterclockwise on all our machines, stacking against the outer wall of the reel.

A wide selection of replacement tools and parts (high-quality cable, fittings, blades and attachments) will keep you up and running.

Our cable machines feature not all applicable to the M500

Quick reel change

Operator safety

– convenient tension release mechanisms

– foot pedal activation

– watertight electrical switches and boxes, built in GFCI

Quiet operation

– from heavy duty electric motors

Customizable

– cable lengths and core – open or closed reels are available for most models and cable sizes

– multiple styles of fittings for cable and attachments: threaded (including Autry style), slip-joint, interlocking, slot-lock, Ridgid and bulbhead styles

Replacement parts, cable and tools: Reels and components pgs 40-41

Accessories and parts pgs 42-43

Cable and fittings pgs 45, 50-52

Blades and attachments pgs 46-49

Rugged frames

– tubular steel construction – pneumatic tires – balanced weight for optimal mobility

Autofeed-Retrievers available – standard on some models

Cable Machines

for 1" to 6" lines

Compact, lightweight workhorses get in to tight spaces. Quiet operation.

M500 is shown with cable installed, and optional elephant trunk

The versatile M661

No matter what size cable you start with, you can swap in a different size later to work in larger or smaller lines. See our REO units (pg 40) to purchase M661 reels with 1/4" to 1/2" cable. Many options–such as a transport cart or mini Autofeed help you work more efficiently.

requires hoop for mounting, 2 sizes available

SmartDrive™

The M745’s SmartDrive™ technology gives you variable speed and lets you set torque preferences. Throttle the machine up to 300 rpm to negotiate turns, maximize cleaning force, and expedite feeds or rewinds. Turn it down to 100 rpm to destroy soft obstructions and heavy debris.

M661 is shown with revolving arm and...

3/8" cable-in-reel (left)

1/2" cable-in-reel (below)

M500 for 1" - 2" lines

Mini Workhorse

The M500 tackles bathtubs, urinals and sinks. It has a heavy duty drive train and a rugged frame that can be operated horizontally or vertically. 2 speeds.

– Cone and funnel design prevents cable from flipping

– Forward / reverse switch

– Optional elephant trunk cable guide available

M661 Little Workhorse

Our versatile M661 Little workhorse can run 1/4”, 5/16", or 3/8” cable, and up to 100’ of 1/2” cable. Start with the base, then add 3/8" or 1/2" cable to suit your work needs. Swap in a different size later, see our REO units, pg 40.

for 3" - 4" lines

Bundle and save with our M661 Complete Package. See mytana.com/m661-package for details.

M745 for 3" - 6" lines

Variable Speed Workhorse

The M745 is standard with 9/16” cable and an Autofeed/ Retriever. SmartDrive technology lets you dial in speeds from 100 to 300 rpm and get audio alerts on torque loads.

Rugged frame has a telescoping handle, stair glides and a loading wheel.

All cable machines can be ordered with wire-core cable or different end style, additional charges may apply. excludes M500 for 11/2" - 3" lines for 11/2" - 3" lines

Work on smaller lines with the optional SK745 Sinkline Kit. Swap out the 9/16” cable with a reel of 3/8” cable.

MOTOR electric SPEED variable, up to 280 rpm SIZE 12.5" W × 18" L × 16" H

BASE WT 23 lbs (with cable)

Include 1/4" hollow core cable, hook end – Closed poly reel

BASE PRICE $ 1,174 no cable or elephant trunk

LENGTH PRICE

50' $ 1,223

Elephant trunk guide MT M500 ELE TRUNK add $ 58

MOTOR 1/3 hp electric, belt drive SPEED 144 rpm SIZE 14" W × 18" L × 18" H

BASE WT 41 lbs (no cable)

Include 3/8" hollow core* cable in reel – threaded ends* – open steel reel (closed reel avail same price) – revolving arm also included

Include 1/2" hollow core* cable in reel – threaded ends* – closed poly reel (open reel avail same price) – revolving arm also included

BASE PRICE $ 1,758 no cable, reel or rev arm

LENGTH PRICE

50' $ 2,138 80' $ 2,170 100' $ 2,196

80' $ 2,276 100' $ 2,312

Mini Autofeed, small hoop (for 3/8” cable) SH-MAF add $ 842

Mini Autofeed, large hoop (for 1/2” cable) LH-MAF add $ 842

Transport cart M661 CARTCOMP add $ 337

MOTOR 1/3 hp electric, gearbox drive SPEED Variable, 100-300 rpm SIZE 18" W × 31" L × 40" H

BASE WT 159 lbs (w/ cable) 89 lbs (no cable)

BASE MODEL

LENGTH PRICE 100’ $ 5,500

INCLUDES 9/16" hollow-core* cable in closed reel (open reel N/A)

SK745 Sinkline Kit 3/8” hollow-core* cable in reel, smaller rev arm – poly reel (open reel N/A) – threaded fittings*

Suggested BladePaks for M661 or M745

– slip-joint ends* – revolving arm – Autofeed/Retriever – 3' leader cable and 5' back end cable M661

LENGTH PRICE

80' $ 530

for 3/8” cable M661 BladePak (see pg 49) threaded fittings add $ 66 General fittings add $ 139 for 1/2” cable BladePak 234 (see pg 49) threaded fittings add $ 66 SJ, GE, IL or RE fittings add $ 93

M81 shown with 3/4" cable-in-reel unit installed

M888 shown with 3/4” cable-in-reel unit installed

M500

M81

Big Workhorse

for 3"-10" lines

Options

The M81 is a workhorse that’s been serving professionals for years in industrial, commercial, or residential settings.

The sled-style, rugged steel frame gives a low profile and the ability to easily split the weight into two parts when transporting. Balanced weight aids mobility.

Quick reel change design makes adding an extra lengths of cable easy—the gearbox can push up to 400' of cable. 8" fully pneumatic tires minimize tracking dirt. Like the M661, the M81 has many options such as our Autofeed/Retriever and Cable Reel Cart to help you work even more efficiently.

The M81 can even accept a smaller reel of 3/8" cable and adapted revolving arm for work in 11/2" - 3" lines. The SK34 Sinkline Cleaning Kit is available online, see MyTana.com.

M888 for 3"-10" lines

Upright Workhorse

Maximize power and portability with the M888. The compact size and upright design gets into tight spaces. And because the transport handle is at operator height it eases strain on your back. Features include: – autofeed/retriever included – built in stair glides assist with transport, flip down to lock wheels while in use – 10” fully pneumatic tires

With MyTana’s easy reel change design, you can quickly add additional lengths of cable, the gearbox can push the cable up to 400 feet.

MOTOR 1/2 hp electric, gearbox drive SPEED 132 rpm can be set faster SIZE 26” W × 36” L × 30” H

BASE WT 84 lbs (no cable)

Include 3/4” hollow core* cable in reel – slip-joint ends* – 11/16” cable available, same price – open steel reel (closed reel avail same price) – revolving arm, 3' leader cable and 5' back end (anchor) cable also included

BASE PRICE $ 3,668 no cable, reel, rev arm or autofeed

LENGTH PRICE

100’ $ 4,519 125’ $ 4,582

Large Autofeed AUTOFEED LRG see pg 43 add $ 551

Cable Reel Cart CRC see pg 42 add $ 497

MOTOR 1/2 hp electric, gearbox drive SPEED 150 rpm

SIZE 26" W × 35" L × 47" H

BASE WT 117 lbs (no cable)

Include 3/4” hollow core* cable in reel – slip-joint ends * – 11/16” cable avalable, same price – closed poly reel (open reel avail same price) – revolving arm, 3' leader cable and 5' back end (anchor) cable also included

BASE PRICE $ 4,894 no cable, reel or rev arm

LENGTH PRICE 100’ $ 5,552 125’ $ 5,615

Cable Reel Cart CRC see pg 42 add $ 497

Manhole Cable Guide see pg 42 add $ 564

Makes feeds and rewinds easier, works with 1/2” to 3/4” cable. Optional on the M81, included with the M888.

Reels for M661

1/4" cable 5/16" or 3/8" cable

max. 80' of 3/8" cable, see below for 100'

EMPTY REEL COMPONENTS REEL W/ CABLE INSTALLED (REO UNIT)

OPEN WO46

$176

anchor joint NOT included

OPEN WO43C $176

anchor joint NOT included CLOSED WO43CP $193

Drive Spring DS21 Anchor Joint J255

Reel Cover RC1

Cable Sz Lngth Hollow Core PART NO.

1/4" 25’ $242 REO103-25 40’ $262 REO103-40 50’ $274 REO103-50

Wire core and Installed ends are not available, cable will have open hook end

Drive Spring DS21 Anchor Joint J252

Reel Cover RC2

Drive Spring DS21 Anchor Bracket J238

Cable Sz Lngth Hollow Core Wire Core PART NO 5/16" 40’ $282 $301 REO104-40 80’ $331 $359 REO104-80 3/8” 50’ $317 $335 REO105-50 80’ $354 $383 REO105-80

REO units with 5/16" or 3/8" cable are available with ME or GE ends only

Prices reflect either open or closed reel

1/2" cable or 100' x 3/8" cable)

OPEN WO43C-1/2 $205

anchor joint NOT included CLOSED WO43CP-1/2 $236

Drive Spring DS21 Anchor Joint J251

Reel Cover RC3

Drive Spring DS21 Anchor Bracket J212

Cable Sz Lngth Hollow Core Wire Core PART NO

3/8" 100' $456 $475 REO105-100 1/2" 80' $474 $511 REO661-80 100' $515 $552 REO661-100

REO units with 3/8" cable are available with ME or GE ends only Prices reflect either open or closed reel

Larger Reels (this page) empty – or filled with 9/16" or larger cable – also include • a back-end (anchor) cable Specify end style

All reels w/cable (REO) units include • installed ends on the cable REO prices shown are for threaded ends See MyTana.com/REO for prices on other style ends

Anchor Fitting J745-916 9/16" cable

Anchor Bracket 745-0602

(Sinkline Kit uses WO43CP opp. page)

Drive Spring DS22 Anchor Joint J251

Cable Sz Lngth Hollow Core Wire Core PART NO

1/2" 80' $474 $511 REO745-12-80 100' $515 $552 REO745-12-100 9/16" 80' $503 $535 REO745-916-80 100' $535 $581 REO745-916-100

Cable Sz Lngth Hollow Core Wire Core PART NO

Reel Cover RC4

1/2" 80' $474 $511 REO106-80 100' $515 $552 REO106-100 9/16" 80' $503 $535 REO108-80 100' $535 $581 REO108-100 125’ $596 $652 REO108-125 5/8" 50’ $474 $497 REO110-50 75’ $520 $551 REO110-75 100’ $618 $664 REO110-100

Drive Spring DS22 Anchor Joint J251

Reel Cover RC5 Drive Spring DS22P Fitting J253 Bracket J258

Cable Sz Lngth Hollow Core Wire Core PART NO

11/16” 100’ $739 $800 REO202-100 125’ $815 $892 REO202-125 3/4” 100’ $782 $846 REO204-100 125’ $854 $937 REO204-125

Prices reflect either open or closed reel

Cable Machine Accessories

Waterproof Gloves

Order

One size fits all.

Heavy-duty, waterproof gloves for handling sewer cable. Improves your grip and protects your skin from harsh chemicals and sewage.

Both the yellow Ugly® and black gloves have embedded PVC chips to aid your grip and prevent creasing or getting caught when working with sewer cable.

Cable Reel Cart

$497 CRC

Make loading and transport of mainline cable reels easier with this specially designed 2-wheel dolly. Reduces strain on your back and shoulders. Curved base and locking/ratcheting reel strap hold reels secure. Includes stair glides and loading wheel.

44" H x 20" W

Manhole Cable / Hose Guide $564 CG COMP

Guide your cable into openings while protecting it from sharp edges. 3 steel pipe sections extend up to 12ft from manhole opening.

Ugly Gloves – $14 ea PVC chip coated palm, jersey-lined interior.

Black Work Gloves – $10 ea PVC chip coated palm.

cotton, canvas-like cuff knit cuff Regular – 10” GLOVE-BL REG Long – 13.5” GLOVE-BL LNG Regular – 11” UGLY GLOVE REG Long – 12” no cuff UGLY GLOVE LNG

M661 Transport Cart

$337

M661 CARTCOMP

Ease your transport of the M661. 8" pneumatic tires give smooth ride and minimize tracking of dirt. Cord wrap keeps power cord clear from wheels. Easy release mechanism lets you remove the Little Workhorse quickly.

46" H x 17" W

Folding Ramp $1,063

RAMP FOLDCOM

Extra Wide – Heavy Duty

29 3/8” wide ramp surface with 350 lb capacity. Great for your heavy equipment, water heaters and more! Textured surface for traction. 71/2 feet long extended, folds roughly in half to 47" x 8" thick for easy storage. Longer ramps available, call for pricing.

RealTite Plugs Replacement Cleanout Plugs

Size Relaxed fits ID of: Expanded seals up to: Cover O.D.

Price Each PART#

QTY: 1-49 50+

Seal damaged cleanout openings and broken threads with the ONLY plug in the industry that will not come apart. A compression action of rings and gaskets seals any pipe opening permanently or temporarily, regardless of the condition or threads. A stop bolt ensures no parts will fall into the opening during installation or removal. With a flush finish, RealTite Plugs are suitable for cleanouts near doorways or where carpeting will cover. Complies with National Standard Plumbing Code and meets or exceeds ASTM Standards for permanent plug usage. Easy installation with our Hex Key tool.

1.5" 1.64" 1.95" 2.5" $ 17 $ 16 CP15

2" 2.09" 2.33" 2.5" $ 18 $ 17 CP20

2.5" 2.72" 3.19" 3.63" $ 20 $ 19 CP25

3" 3.04" 3.48" 4" $ 20 $ 19 CP30

3.5" 3.82" 4.15" 4.78" $ 22 $ 21 CP35

4" 4.20" 4.61" 5.375" $ 22 $ 21 CP40

Large Autofeed Retriever $551

For our larger cable machines, assists with feed and rewind of cable with a quick and simple movement of a lever. Take the hard work out of removing a large bundle of roots. Best suited for 9/16" and larger cable.

Foot Pedal, Hose, Switch

Foot

Pedal only

Mini Autofeed Retriever

prices on pg 37

For our M661 (requires a hoop* to mount). Assists with feed and rewind of 1/4" to 1/2" cable. Compatible with Elephant Trunk guide. * 2 sizes for larger or smaller reels, shown: Mini Autofeed on large hoop. Feed and hoops also sold separately.

• Older – switch has a male barb fitting to seat INSIDE a thicker hose. Same prices as newer style. Order online at MyTana.com to get correct part no's.

Fits M81, M844

and

Autofeed Drive Wheel

Bearings

Steel Bushing (front) $23 S100A Brass Bushing (rear) $15 S100B

Autofeed

Mini Autofeed

Leader Cable

Flexible section of cable attaches to the front of your main cable to help lead it through the pipe. 3' length, custom lengths available. Includes installed end, please specify your choice (see left).

DESCRIPTION

PRICE PART NO.

SUPER-FLEX for 11/16" or 3/4" cable $43 LE151

SUPER-FLEX for 3/4" cable – Ridgid ends $68 LE151-RE 5/8" SUPER-FLEX for 5/8" or 11/16" cable $41 * LE149 9/16" leader for 9/16" or 5/8" cable $37 * LE147 1/2" leader for 1/2" or 9/16" cable $35 * LE146 5/16" leader for 5/16" or 3/8" cable $29 LE145 1/4" leader for 5/16" cable threaded end only $23 LE144

Bulbhead Leader Cable

For 3/8" cable, 2' length. Bulbhead Leader with threaded end $29 LE143-ME Bulbhead Leader with General end $29 LE143-GE

Includes Bulbhead fitting

Back-End/Anchor

Cable

5ft long. Fits between main cable and reel to simplify reel changes when using multiple reels. Back-end cables include:

• installed cable connection end specify end style

• anchor fitting to attach to reel specify if to be used in open or closed reel

SIZE PRICE PART NO.

9/16” cable $55 BE5 9/16" 5/8” cable $55 BE5 5/8" 11/16” cable $55 BE5 11/16" 3/4” cable $55 BE5 3/4"

ME GE

ME SJ IL GE RE threaded slip joint spartan general ridgid

Edge Some blades have a choice of a knife/plain edge (P) or a serrated/ toothed edge (T).

Pear shaped blades have some flex to fit in smaller openings, then expand. Rounded bases fit bracket below. Suitable for 3"- 6" lines. Blades are 1” wide (except paddle blades) All have teeth.

Mounting bracket

Mounted blades include block, washer and nut.

are for ME style block – all other styles add $5/blade ($15 per 3-pack)

Mounted blades include cones, bolt (ME or SJ style only) and nut. Prices are for ME style bolt – SJ style add $5/blade

Spearhead

11/2" dia 2" dia 3" dia

Standard (shown) fits cable with male threaded end. Other end styles require mounting block, (right).

Mounting Blocks

For our smaller blades (KN4-KN28T). All blocks include lock washer and nut.

Chisel Head 23/8" x 3/4” W – Punches drainage hole thru hard blockages

These tools have fittings built-in, please specify end style.

Prices are for ME style block, other styles add $5/blade.

$53 KN84P-3/4

Prices are for ME style chuck – SJ style add $5/blade

Threaded (ME) Block only B501 Block and B503 holder B502

Male SJDM

Spartan / interlocking (IL) ILDM General (GE) GEM-DM

Blade Holder fits 1" wide blades B503 Ridgid (RE) REDM

Chuck Units

Cones and chuck units (bolt and nut) hold our 3"-4", 6" and 8" KN blades

Chuck Cones B512

Threaded (ME) Bolt and nut B511

Bolt, nut and cones B513

Slip Joint (SJ) Bolt and nut SJCB

Order 12 or more and save! Order 12 or more and save!

$13 1-11 12+ $20 $19.75

Mounted tools incl. cones, bolt and nut. Cable | ends | Blades 47 PHONE:

( 866) 837-7972 EMAIL: mytana@mytana.com WEBSITE: MyTana.com

BladePaks

Mainline BladePaks

Pear Shaped BladePak

Suitable for 11/16" and 3/4" cable. All blades are serrated. Two each: 2", 3", 4" and 6" pear-shaped blades, and four BH500 blade holders with fittings – specify style needed:

BLADEPK PS

• ME threaded SJ slip-joint IL Spartan or GE General $177

• RE Ridgid $205

BladePak 234

Suitable for 1/2” to 3/4” cable. 1 ea. knife edged single 2" and double 21/8", and 1 ea. serrated double 3" and 4" blades. All are in mountings, specify style needed:

BLADEPK 234

• ME threaded $66

• SJ slip-joint IL Spartan GE General or RE Ridgid $93

Mainline BladePak

Suitable for 11/16" and 3/4" cable. 2" to 6" blades, some mounted, plus a pig tail retriever. See MyTana.com for detailed list of what is included. Specify mounting style:

BLADEPK ML

• ME threaded

• SJ slip-joint

Muni BladePak

Suitable for 11/16" and 3/4" cable. Set of 2" to 8" blades, some mounted, plus a pig-tail retriever and spearhead cutter. See MyTana.com for detailed list of what is included. Specify mounting style:

BLADEPK MUNI

• ME threaded

• SJ slip-joint $343

Specialized Tool Kit 1

Suitable for 1/2" to 3/4" cable. Includes 4" paddle blade, 12" retriever/grease spring, pig-tail retriever and spearhead cutter. Specify mounting style:

SPTK1

• ME threaded

• SJ slip-joint IL Spartan GE General or RE Ridgid $164

Specialized Tool Kit 2

Suitable for 1/2" to 3/4" cable. Includes spade, medium drop head and chisel head. Specify mounting style:

SPTK2

• ME threaded $77

• SJ slip-joint IL Spartan GE General or RE Ridgid $98

( 866) 837-7972

Sinkline BladePaks

M661 BladePak

Suitable for 5/16" and 3/8" cable. Sets of 1" to 2" blades and drop head swivel.

Threaded Fittings

Also includes 6" grease spring, 1 spade blade and holder, threaded coupling, lockwashers and nuts.

BLADEPK M661 ME $66

General Fittings

Also includes three mini-spade blades, GE blade holders, female fitting and allen wrench.

BLADEPK M661 GE $139

Bulbhead BladePak

Suitable for 3/8" cable. 1" to 2" single, double and double offset blades, 1 bulbhead fitting.

BLADEPK BUHD $40

Mini Spade BladePaks

Suitable for 3/8" cable. Sets of 1" to 13/4" mini spade blades and allen wrench.

Threaded Fittings

Also includes 3 mini spade blade holders.

BLADEPK MNSP $52

General Fittings

Also includes 1 female end.

BLADEPK MNSPGE $28

mytana@mytana.com

MyTana.com

NOTE: It is very difficult to warrant sewer cables. Our experience is that sewer cables can break for three reasons.

1. Cables are over-torqued by the operator — the most common reason.

2. Cables that are used in clogged drains that contain acid based drain cleaning chemicals can become brittle and break. 3. There are minor imperfections in the wire used to make the cables which can cause the cable to break. Most of these imperfections are discovered when the wire is rolled into the cable.

Slip-Joint Ends

Interlocking Ends

Ridgid Ends

SP3/4 11/16"

SP5/8 9/16"

MyTana LLC

746 Selby Avenue St. Paul, MN 55104

(866) 837-7972

Monday - Friday 7 am - 5 pm CST FAX (651) 222-1739

www.MyTana.com

Create an account when you place an online order for easy re-ordering!

Canadian Customers:

All prices in this catalog are in US dollars. Applicable taxes and duties will be added to product sales or repairs.

Leasing/Financing

More detailed information about items below can be found on our website.

Ordering – Call us to order by phone, or visit MyTana.com to purchase online. Create an account when you place an online order for easy re-ordering!

All prices in this catalog are in US dollars.

Payment – We accept checks or major credit cards, or can establish Net 30 day payment terms to qualifying customers. Visit MyTana.com/credit-application to complete our application for terms. Credit card payments on Net30 accounts are subject to a 3% service charge.

Leasing – Complete an online application with our lending partner to see if you qualify for leasing, see bottom of this page.

Shipping – Most products ship UPS from our St. Paul factory. We strive to ship within 48 hours of receiving your order on standard catalog products.

Warranty – All products are warranted against defects in material and workmanship for 1 year from date of purchase. Damage due to negligence, abnormal usage, accidents, or alteration is not covered by this warranty. Note: It is extremely difficult to assign responsibility for product defect of used sewer cables and blades.

Please inspect all products carefully upon receipt.

See MyTana.com for more warranty information and exclusions.

Repairs – Cable machine and most jetter repairs can be completed in the field. MyTana stocks repair and common wear items for your convenience.

Many companies use lease-to-own financing instead of using up valuable cash or limited credit lines.

Complete an online application with either of our lending partners – North Star Leasing Company or KLC Financial – to see if you qualify for leasing. Each offers different programs to give you affordable monthly payments.

General Tools and Accessories

These products which previously appeared at the back of our catalog can now be found on pages as noted:

Finance your next MyTana purchase. Find a program that works best for you at MyTana.com/leasing. Folding

Hex Key Tool opposite page

Electronics: MyTana does all our own after sale service, warranty work and equipment repair at our Factory Repair Center here in St. Paul, MN.

Returns – Subject to a 20% restocking fee. Custom orders are non-returnable.

We make every effort to ensure the information in our catalog is correct, however descriptive, typographic and photographic errors can occur and are subject to correction. We apologize for any confusion they cause.