Issuu on Google+

Induction Lighting specification sheets


project: fixture type:

DXWPB40 SERIES

location: contact/phone:

BRAVO! WALLPACK INDUCTION LUMINAIRE The BRAVO! Wallpack Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for office buildings, schools, hotels and commercial buildings.

Product Specifics Light Source

One 40 Watt Induction Lamp

Lumens

2800 Lumens

Color Temperature

CRI

Input Voltage

5000K >80 (Ra)

120 or 277 VAC, 50/60Hz

Fixture Weight

10 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

2 Year Limited

Warranty – Lamp and Ballast

7.375"

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65 12.25"

Detailed Specifications CONSTRUCTION Features a durable, die-cast aluminum back housing with an architectural bronze powder coated finish, and a color-matched polycarbonate front housing. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. Features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by an impact-resistant, prismatic, polycarbonate refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 40W round induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

5

10.375"

Photometrics 3

2

.1 1

.2

.5 House Side Street Side

2 0 5

1

INSTALLATION Ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Can be wired to a 4’’ junction box, or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.

1.75 2

1

2.75 3

4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Accessories** Field Installed

Ordering Information Model

Lamp

Volts

Options

PC1 = 120V Photocell

DXWPB40

IND40

120 = 120V

PC1 = 120V Photocell

PC2 = 277V Photocell

277 = 277V

PC2 = 277V Photocell

**Order as a separate line item

Ordering Example: DXWPB40-IND40-120-PC1

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXWPA15 SERIES

location: contact/phone:

WALLPACK INDUCTION LUMINAIRE The Wallpack Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, tunnels and commercial buildings.

Product Specifics Light Source

One 40 Watt Induction Lamp

Lumens

2800 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

15 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

2 Year Limited

Warranty – Lamp and Ballast

7 ˝

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65

Detailed Specifications 12˝

CONSTRUCTION Features a durable, die-cast aluminum housing with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. Features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a vandalresistant, borosilicate glass prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 40W rectangular induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit can be wired to a 4’’ junction box or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.

11 ˝

Photometrics 3

2

1 .1 2

0

House Side Street Side

.5 1

1

1.75 2

2.75 3

.2

4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Accessories** Field Installed

Ordering Information Model

Lamp

Volts

Options

PC1 = 120V Photocell

DXWPA15

IND40

120 = 120V

PC1 = 120V Photocell

PC2 = 277V Photocell

277 = 277V

PC2 = 277V Photocell

WPA15WG = Wireguard

Ordering Example: DXWPA15-IND40-120-PC1

**Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXWPA25 SERIES

location: contact/phone:

WALLPACK INDUCTION LUMINAIRE The Wallpack Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, tunnels and commercial buildings.

Product Specifics Light Source

One 80 Watt Induction Lamp

Lumens

6400 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

20 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

10 ˝

2 Year Limited

Warranty – Lamp and Ballast

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65

˝

Detailed Specifications CONSTRUCTION Features a durable, die-cast aluminum housing with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. Features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a vandalresistant, borosilicate glass prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 80W rectangular induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

˝

Photometrics 3

2

1 .1 1 0

.5

House Side Street Side

5

1

INSTALLATION Ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit can be wired to a 4’’ junction box or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.

1.75 2

2

2.75 3 .2 4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Accessories** Field Installed

Ordering Information Model

Lamp

Volts

Options

PC1 = 120V Photocell

DXWPA25

IND80

120 = 120V

PC1 = 120V Photocell

PC2 = 277V Photocell

277 = 277V

PC2 = 277V Photocell

WPA25WG = Wireguard

Ordering Example: DXWPA25-IND80-120-PC1

**Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXWPR40 SERIES

location: contact/phone:

DESIGNER WALL PACK INDUCTION LUMINAIRE The Wallpack Induction Luminaire utilizes a round design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for office buildings, schools, parking garages and commercial buildings.

Product Specifics Light Source

One 40 Watt Induction Lamp One 80 Watt Induction Lamp

Lumens

2800 Lumens (1 x 40W) 6400 Lumens (1 X 80W)

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

15 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

2 Year Limited

Warranty – Lamp and Ballast

˝

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white powder coated steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, borosilicate glass prismatic refractor.

15˝

Photometrics 3

ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).

2

LAMPS (Included) Available with either (1) 40W or (1) 80W round induction lamp that provides either 2800 or 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

0

INSTALLATION Ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit can be wired to a 4’’ junction box or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.

.1

.5 1

1

2 5

House Side Street Side

1

1.75 2

2.75 3

.2

4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Ordering Information

Accessories*** Field Installed

Model

Lamp

Volts

Style

Housing Color

Options

PC1 = 120V Photocell

DXWPR40

IND40*

120 = 120V

OF = Open Face

BZ = Bronze

PC1 = 120V Photocell

PC2 = 277V Photocell

IND80**

277 = 277V

GR = Grid Frame

BK = Black

PC2 = 277V Photocell

***Order as a separate line item

HC = Half Cutoff

WH = White

Ordering Example: DXWPR40-IND40-120-HC-BZ-PC1 *HC Unit Only **OF & GR Units Only

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXVN40 SERIES

location: contact/phone:

VANDAL/CANOPY INDUCTION LUMINAIRE The Vandal/Canopy Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, parking areas, manufacturing facilities, warehouses and canopy lighting.

Product Specifics Light Source

One 40 Watt Induction Lamp

Lumens

2800 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

19 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

2 Year Limited

Warranty – Lamp and Ballast

12 ˝

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65 8 ˝

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze or white powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, UV stabilized polycarbonate prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 40W rectangular induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

12 ˝

Photometrics 3

.1

2 .5 1

1

House Side Street Side

0

INSTALLATION Ideal for mounting to any horizontal surface and features 1/2’’ NPT entry points for conduit access. Specifications are subject to change without notice.

1

2

1.75 2 .2 2.75 3

4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Ordering Information Model

Lamp

Volts

Options

DXVN40

IND40

120 = 120V

PC1 = 120V Photocell

277 = 277V

PC2 = 277V Photocell

Ordering Example: DXVN40-IND40-120-PC1

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXVN42 SERIES

location: contact/phone:

VANDAL/CANOPY INDUCTION LUMINAIRE The Vandal/Canopy Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for cold storage areas, walk-in freezers, meat packaging facilities, manufacturing facilities, warehouses, canopy lighting and parking garages.

Product Specifics Light Source

One 80 Watt Induction Lamp

Lumens

6400 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

15 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

2 Year Limited

Warranty – Lamp and Ballast

12 ˝

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO 12 12 ˝

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze or white powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, UV stabilized polycarbonate prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 80W rectangular induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any horizontal surface and features 1/2’’ NPT entry points for conduit access. Specifications are subject to change without notice.

12 ˝

Photometrics 3

.1 .2

2

.5 1

1

2 5

House Side Street Side

0

1

1.75 2

2.75 3

4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Accessories** Field Installed

Ordering Information Model

Lamp

Volts

Options

PC1 = 120V Photocell

DXVN42

IND80

120 = 120V

PC1 = 120V Photocell

PC2 = 277V Photocell

277 = 277V

PC2 = 277V Photocell

VN42PC4 = Replacement Prismatic Lens

Ordering Example: DXVN42-IND80-120-PC1

VNQM = Hinged Quick Mount Bracket*** **Order as a separate line item ***Mount Over Recessed Electrical Box or Use 3/4˝ NPT Stem for Pendant Mounting

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXVNGL30 SERIES

location: contact/phone:

DELUXE GARAGE LIGHTER INDUCTION LUMINAIRE The DELUXE Garage Lighter Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, manufacturing facilities, warehouses canopy lighting and parking garages.

Product Specifics Light Source

One 80 Watt Induction Lamp

Lumens

6400 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

17 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components Warranty – Lamp and Ballast

2 Year Limited

11˝

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO ˝

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is listed for covered ceiling mount and includes corrosion-resistant hardware. Features a two-piece aluminum reflector, the upper can be removed to create an attractive up-light. The lamp(s) are protected by a UV stabilized, vandal-resistant, polycarbonate prismatic refractor. Wet Location Listed. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 80W round induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

16˝

Photometrics 3 .1 2

.2 .5 1

1

2 5 House Side Street Side

10 0

INSTALLATION Ideal for mounting to any horizontal surface and includes a mounting plate for easy, hands-free wiring to any standard 4’’ junction box.

1

1.75 2

Specifications are subject to change without notice.

2.75 3

4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Ordering Information

Accessories* Field Installed

Model

Lamp

Volts

VNGL30PC = Replacement Lens

DXVNGL30

IND80

120 = 120V

VNGL30PM = Pendant Mount**

277 = 277V

*Order as a separate line item

Ordering Example: DXVNGL30-IND80-120

** Includes Junction Box, Slide Plate, Locknut, & Hardware

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXVNGL40 SERIES

location: contact/phone:

VANDAL RESISTANT INDUCTION GARAGE LIGHTER The Vandal Resistant Garage Lighter Induction Luminaire is ideal for warehouses, manufacturing facilities, garages, walkways, under passes, loading docks. This fixture gives out even illumination on both horizontal and vertical planes.

Product Specifics Light Source

One 80 Watt Induction Lamp

Lumens

6400 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

15 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components Warranty – Lamp and Ballast

15˝

2 Year Limited 10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO ˝

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, polycarbonate prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).

Photometrics 3

2

LAMPS (Included) Available with (1) 80W round induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any horizontal surface and features 1/2’’ NPT entry points for conduit access.

.1 .2 .5 1

1

2 5

House Side Street Side

0

1

1.75 2

2.75 3

Specifications are subject to change without notice.

4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Ordering Information

Accessories* Field Installed

Model

Lamp

Volts

VNQM = Hinged Quick-Mount Bracket

DXVNGL40

IND80

120 = 120V

CPSPS = Swivel Pendant Mount (Square Box)

277 = 277V

CPSPR = Swivel Pendant Mount (Round Box)

Ordering Example: DXVNGL40-IND80-120

PMJB = Offset Pendant Mount J-Box VNGL40PC = Replacement Lens VNGL30PM = Pendant Mount** *Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXTGL40 SERIES

location: contact/phone:

VANDAL RESISTANT INDUCTION GARAGE LIGHTER The Vandal Resistant Garage Lighter Induction Luminaire is ideal for warehouses, cold storage, manufacturing facilities, garages, walkways, under passes, loading docks. This fixture gives out even illumination on both horizontal and vertical planes.

Product Specifics Light Source

120 Watt Induction Lamp

Lumens

9600 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

15 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

15˝

2 Year Limited

Warranty – Lamp and Ballast

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65 ˝

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast hinged aluminum enclosure with an architectural textured powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, polycarbonate prismatic refractor. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).

Photometrics 3

.2

.1

.5

LAMPS (Included) Available with (1) 120W round induction lamp that provides 9600 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any horizontal surface and features Easy-Hang Bracket that Fits Standard 4˝ Electrical Box, Allowing One-Person Installation. Specifications are subject to change without notice.

2

1 2

1

5 House Side Street Side

10 0

1

1.75 2

2.75 3

4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Ordering Information Model

Lamp

Volts

Options

DXTGL40

IND120

120 = 120V

PC1 = 120V Photocell

277 = 277V

PC2 = 277V Photocell

Ordering Example: DXTGL40-IND120-120

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXFL50 SERIES

location: contact/phone:

DELUXE 12” AREA/FLOOD INDUCTION LUMINAIRE The Deluxe Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, and perimeters.

Product Specifics Light Source

One 40 Watt Induction Lamp

Lumens

2800 Lumens

Color Temperature

5000K

CRI

>80 (Ra)

Input Voltage

120 or 277 VAC, 50/60Hz

EPA Calculation

.55

Fixture Weight

19 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

5.3"

12.4"

2 Year Limited

Warranty – Lamp and Ballast

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65 12.4"

Detailed Specifications

15.6"

CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum 12” enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, anodized aluminum reflector which provides ideal 7H x 7V general light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 40W rectangular induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

Photometrics 3

2

.1 .2 .5

1

1 2 House Side Street Side

0 5 1

INSTALLATION Ideal for mounting to any surface and comes complete with 6’’ pole mount bracket (M6SS). Cover is hinged for easy access to lamp and internal components. Dark Sky compliant when mounted horizontally.

1.75 2

2.75 3

Specifications are subject to change without notice. 4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Ordering Information Model

DXFL50

Lamp

IND40

Volts

Accessories** Field Installed

Mounting Arms* Square Pole

Mounting Arms* Round Pole

Options

120 = 120V

M6SS = 6”

M6SR = 6”

PC1 = 120V Photocell

277 = 277V

M10SS = 10”

M10SR = 10”

PC2 = 277V Photocell

PC2 = 277V Photocell

M12SS = 12”

M12SR = 12”

SF = Slip Fitter Mount

M18SS = 18”

M18SR = 18”

SB = Swivel Bracket HD = Heavy Duty Direct Pole Mount

Ordering Example: DXFL50-IND40-120-M6SS-PC1 *Luminaire comes standard with an M6SS Mounting Arm

PC1 = 120V Photocell SF = Slip Fitter Mount SB = Swivel Bracket HD = Heavy Duty Direct Pole Mount FL50WG = Wireguard FL50GS = Glare Shield FL50LG = Clear Vandal Guard **Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXFL70 SERIES

location: contact/phone:

DELUXE 16” AREA/FLOOD INDUCTION LUMINAIRE The Deluxe Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, and perimeters.

Product Specifics Light Source

One 80 Watt Induction Lamp

Lumens

6400 Lumens

Color Temperature

5000K

CRI

>80 (Ra)

Input Voltage

120 or 277 VAC, 50/60Hz

EPA Calculation

.86

Fixture Weight

24 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

7.5"

2 Year Limited

Warranty – Lamp and Ballast

16.2"

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65 16.2"

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum 16” enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features three different internal, anodized aluminum reflectors to provide ideal light distribution for any application, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 80W rectangular induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

Photometrics 3

2

.1 .2 .5

1

2 5

House Side Street Side

0 10 1

INSTALLATION Ideal for mounting to any surface and comes complete with 6’’ pole mount bracket (M6SS). Cover is hinged for easy access to lamp and internal components. Dark Sky compliant when mounted horizontally. Specifications are subject to change without notice.

1.75 2

1

2.75 3

4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Ordering Information Model

DXFL70

Lamp

IND80

Volts

Accessories** Field Installed

Mounting Arms* Square Pole

Mounting Arms* Round Pole

Reflectors

Options

120 = 120V

M6SS = 6”

M6SR = 6”

BLANK = Standard PC1 = 120V Photocell

277 = 277V

M10SS = 10”

M10SR = 10”

T5 = IES Type 5

M12SS = 12”

M12SR = 12”

SF = Slip Fitter Mount

M18SS = 18”

M18SR = 18”

SB = Swivel Bracket

PC2 = 277V Photocell

PC2 = 277V Photocell

HD = Heavy Duty Direct Pole Mount Ordering Example: DXFL70-IND80-120-M6SS-PC1 *Luminaire comes standard with an M6SS Mounting Arm

PC1 = 120V Photocell SF = Slip Fitter Mount SB = Swivel Bracket HD = Heavy Duty Direct Pole Mount FL70WG = Wireguard FL70GS = Glare Shield FL70LG = Clear Vandal Guard FL70BF = Full Baffle **Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXFL90 SERIES

location: contact/phone:

DELUXE 24” AREA/FLOOD INDUCTION LUMINAIRE The Deluxe Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, and perimeters.

Product Specifics Light Source Lumens Color Temperature

1 x 150 Watt Induction Lamp 2 x 150 Watt Induction Lamp 1 x 200 Watt Induction Lamp

12000 Lumens (1 x 150W) 24000 Lumens (2 x 150W) 18000 Lumens (1 x 200W) 5000K

CRI

>80 (Ra)

Input Voltage

120 or 277 VAC, 50/60Hz

EPA Calculation

1.67

Fixture Weight

40 Lbs.

Rated Life

10.5"

24"

100,000 Hours

Warranty – Housing Components

2 Year Limited

Warranty – Lamp and Ballast

10 Year Limited

Ratings

24"

UL, CSA, CE, FCC, ISO, IP65

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum 24” enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features Two different internal, anodized aluminum reflectors to provide ideal light distribution for any application, and the lamp is protected by a high-impact, heat-resistant tempered glass lens.

Photometrics .1

3 1

ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS(Included) Available with either (1) or (2) 150W induction lamps that provide 12000 initial lumens per lamp or (1) 200W induction lamp that provides 18000 initial lumens. The induction lamps have a 5000K color temperature, provide a CRI of >80 (RA), and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any surface and comes complete with 6’’ pole mount bracket (M6SS). Cover is hinged for easy access to lamp and internal components. Dark Sky compliant when mounted horizontally. Specifications are subject to change without notice.

2

5 1

10 House Side Street Side

0 20 1

1.75 2

2 .5 .2

2.75 3

4

5

0

Ordering Information

2 2.25

3 3.75

4

5

6

7

Accessories*** Field Installed

Model

Lamp

Volts

Mounting Arms* Square Pole

Mounting Arms* Round Pole

Reflectors

DXFL90

IND150

120 = 120V

M6SS = 6”

M6SR = 6”

WDE = Wide Angle PC1 = 120V Photocell

IND200

277 = 277V

M10SS = 10”

M10SR = 10”

T5 = IES Type 5

IND300**

1

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Options

PC2 = 277V Photocell

PC2 = 277V Photocell

M12SS = 12”

M12SR = 12”

SF = Slip Fitter Mount

M18SS = 18”

M18SR = 18”

SB = Swivel Bracket HD = Heavy Duty Direct Pole Mount

Ordering Example: DXFL90-IND150-120-M6SS-PC1 *Luminaire comes standard with an M6SS Mounting Arm **2 x 150 watt Induction Lamp

PC1 = 120V Photocell SF = Slip Fitter Mount SB = Swivel Bracket HD = Heavy Duty Direct Pole Mount FL90WG = Wireguard FL90GS = Glare Shield FL90LG = Clear Vandal Guard FL90BF = Full Baffle ***Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXAD20 SERIES

location: contact/phone:

ADJUSTABLE AREA/FLOOD INDUCTION LUMINAIRE The Adjustable Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, perimeters and site lighting.

Product Specifics Light Source

One 40 Watt Induction Lamp

Lumens

2800 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

19 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

12 ˝

2 Year Limited

Warranty – Lamp and Ballast

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65

16 ˝

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features a choice of two internal, anodized aluminum reflectors which provide ideal general light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. Adjustable housing swivels from 0° to 30°, allowing light to be aimed where needed. Housings have angle indicator for easy adjustments. Hinged design offers easy access to internal components. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).

˝

Photometrics 3

2 .1

1

.5

.2 1

2

LAMPS (Included) Available with (1) 40W rectangular induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Can be wall mounted using included bracket, pole mounting brackets are optional, and are available in 1, 2, 3 and 4 fixture configurations. Decorative covers are also available for pole brackets. Specifications are subject to change without notice.

House Side Street Side

5 0

1

1.75 2

2.75 3

4

5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Accessories** Field Installed

Ordering Information Model

Lamp

Volts

Reflectors

Options

PC1 = 120V Photocell

DXAD20

IND40

120 = 120V

BLANK = Smooth (Standard)

PC1 = 120V Photocell

PC2 = 277V Photocell

277 = 277V

FLD = Flood

PC2 = 277V Photocell

PB1-AD20 = Pole Bracket (1) Fixture, Square Pole

Ordering Example: DXAD20-IND40-120-FLD

PB2-AD20 = Pole Bracket (2) Fixtures at 180°, Square Pole PBC2-AD20 = Pole Bracket Cover For Use With PB2-AD20 PB3-AD20 = Pole Bracket (3) Fixtures at 120°, Square Pole PBC3-AD20 = Pole Bracket Cover For Use With PB3-AD20 PB4-AD20 = Pole Bracket (4) Fixtures at 90°, Square Pole PBC4-AD20 = Pole Bracket Cover For Use With PB4-AD20 PBCAP-AD20 = Pole Bracket Cap For Use With PB Bracket w/o Covers **Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXAD40 SERIES

location: contact/phone:

ADJUSTABLE AREA/FLOOD INDUCTION LUMINAIRE The Adjustable Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, perimeters and site lighting.

Product Specifics Light Source

One 80 Watt Induction Lamp

Lumens

6400 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

24 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

2 Year Limited

Warranty – Lamp and Ballast

16 ˝

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65 20˝

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features a choice of two internal, anodized aluminum reflectors which provide ideal general light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. Adjustable housing swivels from 0° to 30°, allowing light to be aimed where needed. Housings have angle indicator for easy adjustments. Hinged design offers easy access to internal components.

˝

Photometrics 3

ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 80W rectangular induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Can be wall mounted using included bracket, pole mounting brackets are optional, and are available in 1, 2, 3 and 4 fixture configurations. Decorative covers are also available for pole brackets. Specifications are subject to change without notice.

.1 .2 2

.5 1 2

1 House Side Street Side

10 0

1

5

1.75 2

2.75 3

4

5

012

2.253

3.75

45

67

Distance In Units Of Mounting Heigh t Values Based On 10 Foot Mounting Heigh t 1/2 Maximum Candela Trace Shown As Dashed Curv e (+) = Maximum Candela Poin t

Ordering Information

Accessories** Field Installed

Model

Lamp

Volts

Reflectors

Options

PC1 = 120V Photocell

DXAD40

IND80

120 = 120V

BLANK = Smooth (Standard)

PC1 = 120V Photocell

PC2 = 277V Photocell

277 = 277V

FLD = Flood

PC2 = 277V Photocell

PB1-AD40 = Pole Bracket (1) Fixture, Square Pole

Ordering Example: DXAD40-IND80-277-PC2

PB2-AD40 = Pole Bracket (2) Fixtures at 180°, Square Pole PBC2-AD40 = Pole Bracket Cover For Use With PB2-AD40 PB3-AD40 = Pole Bracket (3) Fixtures at 120°, Square Pole PBC3-AD40 = Pole Bracket Cover For Use With PB3-AD40 PB4-AD40 = Pole Bracket (4) Fixtures at 90°, Square Pole PBC4-AD40 = Pole Bracket Cover For Use With PB4-AD40 PBCAP-AD40 = Pole Bracket Cap For Use With PB Bracket w/o covers **Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXKHU20 SERIES

location: contact/phone:

KITTY HAWK PARKING/AREA INDUCTION LUMINAIRE The Medium Kitty Hawk Induction Luminaire provides an aesthetically pleasing addition to any roadway or parking lot. With its smooth, defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. The combination of form and function blend together to make the Kitty Hawk a premier area lighting fixture.

Product Specifics Light Source

One 80 Watt Induction Lamp One 120 Watt Induction Lamp

Lumens

6400 Lumens (1 x 80W) 9600 Lumens (1 x 120W)

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra)

4.73"

22.83"

120 or 277 VAC, 50/60Hz

EPA Calculation

.67 15 Lbs.

Fixture Weight Rated Life

13.58"

100,000 Hours

Warranty – Housing Components

2 Year Limited

Warranty – Lamp and Ballast

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant stainless steel hardware. Features an adjustable anodized aluminum reflector which provides ideal light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 80W or (1) 120W rectangular induction lamp that provides 6400 or 9600 initial lumens per lamp respectively. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any surface and comes complete with two bolt keyhole mounting. Snap action door latch allows for tool-less access. “Dark Sky” Friendly Full cut-off. International Dark Sky Association Seal of Approval for Dark Sky friendly, full cut-off luminaries. Specifications are subject to change without notice.

Ordering Information

Accessories* Field Installed

Model

Lamp

Volts

Reflectors

Mounting

Options

PC1 = 120V Photocell

DXKHU20

IND80

120 = 120V

ADJ = Adjustable

PM = Pole Mount

PC1 = 120V Photocell

PC2 = 277V Photocell

IND120

277 = 277V

WM = Wall Mount

PC2 = 277V Photocell

KHU20GS = Glare Shield

Ordering Example: DXKHU20-IND120-277-ADJ-PM-PC2

*Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXKHU30 SERIES

location: contact/phone:

KITTY HAWK PARKING/AREA INDUCTION LUMINAIRE The Large Kitty Hawk Induction Luminaire provides an aesthetically pleasing addition to any roadway or parking lot. With its smooth, defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. The combination of form and function blend together to make the Kitty Hawk a premier area lighting fixture.

Product Specifics Light Source

200 Watt Induction Lamp

Lumens

18000 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

4.73"

22.83"

.87

EPA Calculation Fixture Weight

19 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

13.58"

2 Year Limited

Warranty – Lamp and Ballast

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant stainless steel hardware. Features an adjustable anodized aluminum reflector which provides ideal light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). LAMPS (Included) Available with (1) 200W rectangular induction lamp that provides 18000 initial lumens. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Ideal for mounting to any wall surface or pole and comes complete with two bolt keyhole mounting. Snap action door latch allows for tool-less access. “Dark Sky” Friendly Full cut-off. International Dark Sky Association Seal of Approval for Dark Sky friendly, full cut-off luminaries. Specifications are subject to change without notice.

Accessories* Field Installed

Ordering Information Model

Lamp

Volts

Reflectors

Mounting

Options

PC1 = 120V Photocell

DXKHU30

IND200

120 = 120V

T2 = Type II

PM = Pole Mount

PC1 = 120V Photocell

PC2 = 277V Photocell

277 = 277V

T3 = Type III

WM = Wall Mount

PC2 = 277V Photocell

KHU30GS = Glare Shield

T5 = Type V

*Order as a separate line item

Ordering Example: DXKHU30-IND200-277-T3-PM-PC2

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXCH40 SERIES

location: contact/phone:

COBRAHEAD INDUCTION LUMINAIRE The Cobrahead Induction Luminaire combines style and elegance providing an aesthetically pleasing addition to any roadway or parking lot. With smoothly defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. Ideal for highways, roadways, parks, parking lots, public entrances, off-street areas and many other applications.

Product Specifics Light Source

40 Watt Induction Lamp 80 Watt Induction Lamp

Lumens

2800 Lumens (40W) 6400 Lumens (80W)

Color Temperature

7.87"

14"

5000K

CRI

>80 (Ra)

Input Voltage

120 or 277 VAC, 50/60Hz 30.51"

Fixture Weight

19 Lbs.

EPA

1.4

Rated Life

100,000 Hours

Warranty – Housing Components Warranty – Lamp and Ballast

2 Year Limited 10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a smooth gray powder coated finish and internal ballast tray. Includes a specular aluminum relfector and molded sag glass lens. Hinged front frame includes stainless steel ‘‘toolless’’ access clips.

Photometrics 3

1 2

ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 40W or (1) 80W rectangular induction lamp that provides 2800 or 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Accepts a 2’’ diameter mounting arm, and a hinged front frame secured with stainless steel clips. Specifications are subject to change without notice.

.2

.5

2 5

1

10 20

House Side Street Side

0

1

1.75 2

2.75 3

4 .1 5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Ordering Information Model

Lamp

Options

DXCH50

IND40

NTLR = NEMA Twist-lock Photocell Receptacle

IND80 Ordering Example: DXCH40-IND80-120-NTLR

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXCH50 SERIES

location: contact/phone:

COBRAHEAD INDUCTION LUMINAIRE The Cobrahead Induction Luminaire combines style and elegance providing an aesthetically pleasing addition to any roadway or parking lot. With smoothly defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. Ideal for highways, roadways, parks, parking lots, public entrances, off-street areas and many other applications.

Product Specifics Light Source

150 Watt Induction Lamp 200 Watt Induction Lamp

Lumens Color Temperature

11"

16"

12000 Lumens (150W) 18000 Lumens (200W) 5000K

CRI

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

36.75"

Input Voltage

32 Lbs.

EPA

2.6

Rated Life

100,000 Hours

Warranty – Housing Components Warranty – Lamp and Ballast

2 Year Limited 10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a smooth gray powder coated finish and internal ballast tray. Includes a specular aluminum relfector and molded sag glass lens. Hinged front frame includes stainless steel ‘‘toolless’’ access clips.

Photometrics 3

1 2

ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F). LAMPS (Included) Available with (1) 150W or (1) 200W rectangular induction lamp that provides 12000 or 18000 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Accepts a 2⅜’’ diameter mounting arm, and a hinged front frame secured with stainless steel clips. Specifications are subject to change without notice.

.2

.5

2 5

1

10 20

House Side Street Side

0

1

1.75 2

2.75 3

4 .1 5

0

1

2 2.25

3 3.75

4

5

6

7

Distance In Units Of Mounting Height Values Based On 10 Foot Mounting Height 1/2 Maximum Candela Trace Shown As Dashed Curve (+) = Maximum Candela Point

Ordering Information Model

Lamp

Options

DXCH50

IND150

NTLR = NEMA Twist-lock Photocell Receptacle

IND200 Ordering Example: DXCH50-IND200-120-NTLR

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXHB11 SERIES

location: contact/phone:

HIGH BAY INDUCTION LUMINAIRE The High Bay Induction Luminaire is ideal for industrial and commercial environments like warehouses, gymnasiums, sports facilities, conventions and retail outlets. This fixture gives out even illumination on both horizontal and vertical planes.

Product Specifics Light Source

One 80 Watt Induction Lamp

Lumens

6400 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

19 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

2 Year Limited

Warranty – Lamp and Ballast

10 Year Limited

Ratings

101/2˝

UL, CSA, CE, FCC, ISO, IP65 91/2˝

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a white powder coated finish. The ballast compartment features either external, heatdissipating fins or leaves the ballast core exposed to extend ballast life. Available with 22’’ spun anodized aluminum reflector or 22’’ prismatic acrylic refractor to provide smooth even illumination.

Photometrics 1293

ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).

970

646 2 323

LAMPS (Included) Available with (1) 80W round induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard. INSTALLATION Features an easy-access wiring compartment, and comes complete with mounting hook. Optional pendant mount and line cord kits are also available.

1

Specifications are subject to change without notice.

Maximum Candela = 1292.855 Located At Horizontal Angle = 0, Vertical Angle = 42 # 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.) # 2 - Horizontal Cone Through Vertical Angle (42) (Through Max. Cd.)

Accessories*** Field Installed

Ordering Information Model

Lamp

Volts

Reflector

Options

CPSPS = Swivel Pendant Mount (Square Box)

DXHB11

IND80

120 = 120V

22AL = 22” Aluminum

LC3 = 3’ Cord

CPSPR = Swivel Pendant Mount (Round Box)

277 = 277V

22CR = 22” Acrylic

LC3120 = 3’ Cord w/120V Straight Blade Plug

CPMH3 = Malleable Hook w/ 1” NPT Threads

LC3120L = 3’ Cord w/120V Twist Plug

HBACR22 = 22” Replacement Acrylic Refractor (Requires CO50022)

LC3277L = 3’ Cord w/277V Twist Plug

HBDL22 = 22” Prismatic Acrylic Drop Lens w/Gasket (Requires CB50022)

Ordering Example: DXHB11-IND80-277-22CR

HB11AR22 = 22” Replacement Aluminum Reflector (Requires CB50022) HBWG22 = 22” Wire Guard (Requires CB50022) HBCL22 = 22” Prismatic Acrylic Conical Lens w/Gasket (Requires CB50022) CB50022 = 22” Tool-Less Clamp Band CO50022 = 22” Collar for Acrylic Refractor LC3 = 3’ Cord LC3120 = 3’ Cord w/120V Straight Blade Plug LC3120L = 3’ Cord w/120V Twist Plug LC3277L = 3’ Cord w/277V Twist Plug SFC500 = Safety Cable ***Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


project: fixture type:

DXHB51 SERIES

location: contact/phone:

DELUXE HIGH BAY INDUCTION LUMINAIRE The DELUXE High Bay Induction Luminaire is ideal for industrial and commercial environments like warehouses, gymnasiums, sports facilities, conventions and retail outlets. This fixture gives out even illumination on both horizontal and vertical planes.

Product Specifics Light Source

200 Watt Induction Lamp

Lumens

18000 Lumens

Color Temperature

5000K

CRI

Input Voltage

>80 (Ra) 120 or 277 VAC, 50/60Hz

Fixture Weight

25 Lbs.

Rated Life

100,000 Hours

Warranty – Housing Components

2 Year Limited

Warranty – Lamp and Ballast

10 Year Limited

Ratings

UL, CSA, CE, FCC, ISO, IP65

Detailed Specifications CONSTRUCTION Features a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a white powder coated finish. The ballast compartment features either external, heat-dissipating fins or leaves ballast core exposed to extend ballast life. Available with 22’’ spun anodized aluminum reflector or 22’’ prismatic acrylic refractor to provide smooth even illumination.

Photometrics 5053

ELECTRONICS Utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).

3790

2527

LAMPS (Included) Available with (1) 200W round induction lamp that provides 18000 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

2 1263

INSTALLATION Features an easy-access wiring compartment, and comes complete with mounting hook. Optional pendant mount and line cord kits are also available. Specifications are subject to change without notice.

1

Maximum Candela = 5053.23 Located At Horizontal Angle = 180, Vertical Angle = 22.5 # 1 - Vertical Plane Through Horizontal Angles (180 - 0) (Through Max. Cd.) # 2 - Horizontal Cone Through Vertical Angle (22.5) (Through Max. Cd.)

Accessories** Field Installed

Ordering Information Model

Lamp

Volts

Reflectors

Options

CPSPS = Swivel Pendant Mount (Square Box)

DXHB51

IND200

120 = 120V

22AL = 22” Aluminum

LC3 = 3’ Cord

CPSPR = Swivel Pendant Mount (Round Box)

277 = 277V

22CR = 22” Acrylic

LC3120 = 3’ Cord w/120V Straight Blade Plug

CPMH3 = Malleable Hook w/ 1” NPT Threads

LC3120L = 3’ Cord w/120V Twist Plug

HB11AR22 = 22” Replacement Aluminum Reflector (Requires CB50022)

LC3277L = 3’ Cord w/277V Twist Plug

HBACR22 = 22” Replacement Acrylic Refractor (Requires CO50022)

Ordering Example: DXHB51-IND200-120-22CR

HBWG22 = 22” Wire Guard (Requires CB50022) HBDL22 = 22” Prismatic Acrylic Drop Lens w/Gasket (Requires CB50022) HBCL22 = 22” Prismatic Acrylic Conical Lens w/Gasket (Requires CB50022) CB50022 = 22” Tool-Less Clamp Band CO50022 = 22” Collar for Acrylic Refractor LC3 = 3’ Cord LC3120 = 3’ Cord w/120V Straight Blade Plug LC3120L = 3’ Cord w/120V Twist Plug LC3277L = 3’ Cord w/277V Twist Plug SFC500 = Safety Cable **Order as a separate line item

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com


DYNalux Specification Sheets