Copyright © MP Lighting All technical information in this document is subject to change.
horizontal double Rail system electronic surface mount TRANSFORMER
(Old Code: DR12150E)
(Old Code: DR12230E)
Spec Sheet Material:
Steel case and copper tube with electroplated finish.
Surface mounts to standard J-box.
100% Duty cycle. Auto reset circuit protection. Can only be used on MP horizontal double rail system. Stem can be used as a rail support. Can be dimmed using electronic low voltage dimmers (i.e. Lutron Diva).
Ø6-3/8” Ø162mm 2-3/8” 60mm 7” 178mm
AC Input Voltage: DC Output Voltage: Output Wattage:
* Custom length available.
150 = 150W 230 = 230W
C = circular
4 = 4” / 102mm from ceiling to bottom of rail 7 = 7” / 178mm X = custom length
MC = matte chrome BN = brushed nickel
t 604.708.1184 f 604.708.1185 mplighting.com
Maximum Load: Power Factor: Typical Efficiency: Short Circuit Protection: Overload Protection: Operating Temperature: Maximum Case Temperature: Humidity (Non-Condensing): Weight:
120V, 60Hz 12V 150W Max. (TLW120E150-HD4C) 150W Max. (TLW120E150-HD7C) 230W Max. (TLW120E230-HD4C) 230W Max. (TLW120E230-HD7C) Depends on wattage of fixture 95% Min. 80% Yes Yes -10 ~ 50°C (14 ~ 122°F) 65°C (149°F) 5% ~ 95% 3 lb / 1.4 kg
Dry locations. Approved to UL standards by CSA/US.
Published on Nov 14, 2011