Page 1

Copyright © MP Lighting All technical information in this document is subject to change.

CABLE system electronic surface mount TRANSFORMER W/ FLEXIBLE FEED

TLW120E150-CS15CF (Old Code:CS12150E/F)

TLW120E230-CS15CF

(Old Code: CS12230E/F)

Spec Sheet

Material:

Steel case and copper tube with electroplated finish.

Mounting:

Surface mounts to standard J-box.

Electrical:

100% Duty cycle. Auto reset circuit protection. Can only be used on MP cable system. Flexible power feed - cannot be used as cable support. Can be dimmed using electronic low voltage dimmers (i.e. Lutron Diva).

Ø6-3/8” Ø162mm

AC Input Voltage: DC Output Voltage: Output Wattage:

2-3/8” 60mm

Maximum Load: Power Factor: Typical Efficiency: Short Circuit Protection: Overload Protection: Operating Temperature: Maximum Case Temperature: Humidity (Non-Condensing): Weight:

15” cord 381mm

120V, 60Hz 12V 150W Max. (TLW120E150-CS15CF) 230W Max. (TLW120E230-CS15CF) Depends on wattage of fixture 95% Min. 80% Yes Yes -10 ~ 50°C (14 ~ 122°F) 65°C (149°F) 5% ~ 95% 3 lb / 1.4 kg

Approval:

Code

Wattage

TLW120E

Mount

-

Cord Length

CS

Canopy

CF

www.mplighting.com

Dry locations. Approved to UL standards by CSA/US.

6” / 152mm

-

Canopy

150 = 150W 230 = 230W

CF = Circular canopy with flexible power feed.

Cord Length

Finish

15 =15” long X = custom length

MC = matte chrome BN = brushed nickel

t 604.708.1184

f 604.708.1185

Wattage

t 604.708.1184 f 604.708.1185 mplighting.com

Finish

* Custom length available.

[Project]

[Quantity] [Note]

Datecode 0809

/TLW120E-CS15CF_spec  

http://www.mplighting.com/pdf/spec/TRF/TLW120E-CS15CF_spec.pdf

Read more
Read more
Similar to
Popular now
Just for you