Issuu on Google+

Mount C1 Canopy and Pendant

1

Unbraid outer woven wire to expose 1/2” (13mm) of inner wire. Twist outer strands tightly together.

2

Strip 1/8” (3mm) of insulation from inner wire.

3

Connect braided coax wire to low voltage wiring (remote transformer 60W minimum 12V).

4

Attach mounting plate to electrical box with screws.

INPUT PRIMARY 120/277V 12V Remote Transformer

45mm 1-3/4”

45mm 1-3/4”

C1 Canopy Ceiling Mount Pendant

Installation Instructions

CAUTION • Read all instructions. • Risk of fire and electrical shock. Turn off power before installation. • Connect to 12V electronic transformer. • Use only low voltage electronic dimmers. • Maximum 50W lamp.

5

Thread C1 canopy to mounting plate.

3mm 1/8”

• Keep this document as a reference.

Copyright © MP Lighting All technical information in this document is subject to change.

13mm 1/2”

• Test installation by leaving fixture on for 20-30 minutes to ensure proper operation.

T 604 708 1184 mplighting.com

Version 05-2008


/P-C1_inst