Page 1

Copyright 2011Š MP Lighting.

L104 www.mplighting.com

1 877 708 1184

Linear Strip Light


L104 Application: Suspended or wall mounted linear LED strip light. Source: 4 x 1W or 6 x 1W LEDs/Ft. Powered by remote driver (not included). Input Current: S2 = 350mA/foot S3 = 230mA/foot Input Voltage: 24V DC Power Consumption: S2 = 6W/foot S3 = 4W/foot Recommended Driver: TLDAV100W24. Dimmable with 0~10V dimming controller (TLC010i, not included). Consult factory.

S (LED spacing)

1-1/4” 32mm

Weight: 0.90lbs (0.41kg)/foot. Ø1”

Material: Aluminum and polycarbonate. RoHS compliant. Ø25mm

1/8” 3mm

Mounting: Mounts directly to surface, or by wall bracket, rod or cable suspension set (suspension sets sold separately). Comes with 6’ (1829mm) wire lead. Power feed is 12” (305mm) from the end.

L (circuit board length) Ø1” Ø25mm

Approval: Dry locations. Approved to US and Canadian standards by CSA. 50 Notes: Recommended suspension points should be 4’ on center maximum. 2-3/4” 70mm

drop

L104

Polar Candela Distribution

4’ LengthDistribution Polar Candela

180° S2 Spacing Distribution Illuminance at a Distance 12°, Frosted 180° g -90° 3000K Std 180° ed -90° 90° 2040 lm d Center Beam FC1.5’ 90°

45°

approx. 3000 cd max. 0°

approx. 6.0’ 3000 cd max. 7.5’ 9.0’

0.6’

0.6’

337.84 0.6’ 150.15 1.3’

1.3’

1.3’

1.9’

1.9’

6.0’ 1.9’ 7.5’ 2.6’

1.9’84.46 2.6’54.06

2.6’

2.6’

3.2’

3.2’

337.84 0.6’ 45° 150.15 1.3’

45° 150.15

6.0’30001.9’ cd

84.46 1.9’

7.5’max.2.6’

84.46

54.06 2.6’

2-3/8” 9.0’ 3.2’ 60mm

80

80

30 .73 .61 .51 .44 .38 .33 .29 .26 .23 .21 .19

RW %: RCR: 0 0 701 .73 .71 2 .59 .65 3 .48 .59 4 .40 .54 5 .34 .49 6 .29 .45 7 .25 .42 8 .22 .39 9 .36 .20 10 .18 .34 .16 .31

70 70 50 .73 .73 50.66 30 .64 .71 .60 .71 .55 .62 .55 .60 .49 .54 .50 .50 .43 .48 .46 .43 .38 .42 .43 .37 .35 .38 .40 .33 .31 .34 .29 .37 .29 .31 .34 .26 .26 .28 .32 .23 .24 .26 .21 .24 .19

30 .73 0.61 .61 .51 .52 .44 .43 .38 .37 .33 .32 .29 .28 .26 .24 .23 .21 .21 .19 .19 .17 .16

Code

L104

3.2’37.54

54.06 0° 9.0’

3.2’

37.54 3.2’

0° 3.9’ Spread:3.9’ 24.2°

37.54

3.9’

3.9’

90° Spread: 24.2°

Coefficients Of Utilization

3-1/8” 79mm

0° Spread: 24.2°

2-3/8”

3.9’ 3.9’ 24.2° 0° Spread:

2-3/8” 60mm

90° Spread: 60mm 24.2°

90° Spread: 24.2°

Effective Floor Cavity Reflectance: 20%

70 50Reflectance:30 Effective Floor Cavity 20% RW %: 7070 50 30 500 70 50 30 30 0 50 1030 20 0 50 30 Effective Floor Cavity Reflectance: 20% RCR: 0 .73 .73 .73 .73 .71 .71 .71 .61 .68 .68 .68 .65 .65 050 70 150 .66 30 0 .6150.5910 30 .65 20 .620 50.6030.5220 .5950.5830.5620 .57 0.55 30.64 .68.54.65 .71.55 .61.51.68 .73 .712 .71.60 .47 .49.62 .46.62.50.61 .50.65 .43.65.52.62 .48.68.59 0 .54 .55 .53 .52 .51 50 30 50 .52 30 20 .58 50 .56 30 20 .65320 .62.55 .60 .59 .48.57 .43.55 .37 .46 .42 .39 .44 .41 .49 .44.59 .40 .54 .65 .43 .65 .65 .68 .68 .61 .45 .48 .46 .44 .43 .62 .46 .62 .62 .50 .47 .52 .49 .594.68 .54.50 .50 .48 .39 .41 .36 .33 .49 .42 .37 .32 .43 .38 .34 .35 .57 .55 .54 .59 .58 .56 .43 .51 .38 .42 .40 .37 .36 .55 .39 .53 .52 .44 .37 .46 .40 .545 .48.46 .33.41 .28 .36 .32 .28 .35 .31 .29.42 .50.38.47.33.45 .52 .49 .46 .37 .43 .48.45 .46.38.44 .39 .33 .32 .41 .34 .496 .42.43 .28.35 .25.32.32.31 .42 .34.37 .29.35 .24.32.33.38 .25.36 .28 .44.35.41.29.38 .46 .42 .39 .36 .42 .40 .32.39 .28.31.35 .33.31 .28.26.36 .29 .457 .38.40 .31 .28 .34 .25.31 .22.28.29.26 .26 .21 .22 .25 .39 .24 .41 .36 .31 .25.30.31 .38 .25 .35 .32 .35 .32 .33 .28 .428.33 .34.37 .29 .25 .27 .32 .28 .19 .27 .23 .20.24.26.23 .29.31.23.28.20 .34.36.31.28.28.23 .26 .22 .36 .32 .28 .35 .25.34 .22.26.29 .26.26 .21.21.30 .22 .399 .31.34 .24 .22.24.20 .25 .22.25.28 .21 .18 .21 .17 .18 .20 .33 .28 .25 .23 .19 .26 .22 .19 .18 .31 .20 .27 .24 .32 .19 .28 .25 .27 .28.32 .23 .20 .36 .26 .31.24.24.22 .19.22 .16 .23 .19 .16 .23 .19 .24.25.19.22 .16.23 10.22 .30 .25 .20 .28 .29 .18 .34 .26 .21 .17 .25 .21 .18 .24 .20 .17 .24 .20 .17 .16 .27 .23 .18 .16 .22 .18 .16 .15 .26 .16 .22 .19 .26 .16 .22 .19 .23 .19 .31 .20 .24 .19 .16 .23 .19 .25 .21 .18 .24 .20 .17 .24 .20 .17 .16 .23 .19 .16 .23 .19 .16 .22 .18 .16 .15

RCC %:

RCC %:

Beam Width

3.0’ 0.6’ 4.5’ 1.3’

Beam 1,351.38 Width 0.6’

3.0’

Center Beam FC

Coefficients Of Utilization

f Utilization

0 73 64 55 49 43 38 35 31 29 26 24

90°

4.5’approx. 1.3’

3.0’ -45° 4.5’

drop

1,351.38 Center Beam FC 1.5’ Beam Width

337.84

1,351.38

1.5’

-45°

Illuminance at a Distance

Illuminance at a Distance

80

Length (L)

Spacing (s)

10

20 .65 .54 .45 .38 .32 .28 .25 .22 .19 .17 .16

50 .62 .55 .48 .42 .38 .34 .31 .28 .26 .24 .22

0

30 .62 .53 .46 .40 .35 .31 .27 .24 .22 .20 .18

Color

20 .62 .52 .44 .37 .32 .28 .24 .22 .19 .17 .16

Shown as rod suspension set, Flat frosted lens

0 .61 .51 .43 .36 .31 .26 .23 .20 .18 .16 .15

Shown as wall mount, Convex clear lens

2-3/4”

Note: Various operating factors may cause differences 70mm between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information. 3-1/8” 79mm

drop

Beam

Lens

-

Power Feed

4 = 4’ (1219mm) 8 = 8’ (2438mm) X = custom

S2 = 2” (51mm) S3 = 3” (76mm) between LEDs

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W30H = 3000K, high CRI

2-3/8” beam 60mm

12 = 12° 30 = 30° beam

T = flat clear F = flat frosted

2-3/8” 60mm

E = end feed T = top feed

Finish

MA MA = matte clear anodized

Notes: S2 = 12’ (3658mm) max. per 100W24V driver S3 = 18’ (5486m) max. per 100W24V driver

Copyright © MP Lighting. All technical information in this document is subject to change.

02-2011

t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada

/L104_cata  

http://www.mplighting.com/pdf/catalogue/L/L104_cata.pdf

Read more
Read more
Similar to
Popular now
Just for you