Page 1

Misconceptions About Ice Studs Icy roads can be dangerous. To increase traction and safety when weather turns terrible, you will need ice studs whether on a bike, motorcycle or perhaps an ATV. These studs can be installed in a tire to grip icy surfaces; they make your traction almost as good as it is on dry surfaces. Even on the days that most people would not be outside, you can enjoy the outdoors once you have bought ice studs. Misunderstandings about their effectiveness regrettably does exist in connection with these studs. Some of these myths are: studs are harmful on dry surfaces, they puncture holes in inner tubes, and they are only necessary on the front tires. Some people argue that metal studs do not provide traction on dry surfaces, causing the bike or ATV to lose control when there's not ice. Ice studs are basically a rubber tire that has metal studs protruding which is much safer, not a tire layered in metal. When a studded tire comes in contact with a dry surface area, such as an asphalt road, the studs sink into the tread leaving the rubber tire against the surface. This happens because asphalt that's not covered in ice offers more resistance to the studs than the rubber tire can. If, however, the tire encounters a layer of ice, the studs burrow in because ice offers less resistance than the rubber tire. More proof they work effectively on any type of surface is the fact they have been around for years and used with or without bad weather. It could be believed that lawsuits would have taken the studs off the market a long time ago but that is not the case because riders usually don't have any less control using ice studs. Punctures involving the inner tubes is one other myth that is not accurate. This faulty reasoning is likely based on the fact that studs do sink into tread once they encounter dry surfaces. The design of the studs or the size is not taken into consideration which is where the mistake in the logic is. While studs are screwed directly into the rubber tire, they do not have a sharp end that can split a tire. When compared to the size of the tire itself, the studs are rather small. Often the studs do not protrude past the present tread on a tire. It is a misguided belief that they are required only on the front tire also and that theory can impact the riding experience. It is not necessary to worry about the other concerns as long as the tires have effective traction when out for a ride. Almost anyone who has tried this approach will tell you it doesn't work. The bike can skid or swerve out of control when the front tire has sound traction and the back tire slides. When riding in the street, this can be especially frightening and dangerous because you have no protection from larger sized vehicles and skidding out of control can be deadly. Studs are highly recommended on all wheels of the vehicle you mount them on. Ice studs are a great way to increase your traction and basic safety in winter driving. Rather than listening to common myths shared by people who have never used them, talk with people who have. After you research studs, you may find that they are an even better investment than you gave them credit for. By putting ice studs for shoes on your soles, you're able to stay on your feet all winter. Find out more about Grip Studs by visiting their website which is http://www.gripstuds.com/.

Deardorff Fitzsimmons Corporation

Page 1


Misconceptions About Ice Studs

Document Tags: ice studs for tires, ice studs, ice studs for shoes http://www.gripstuds.com/

Deardorff Fitzsimmons Corporation

Page 2


Misconceptions About Ice Studs  

By putting ice studs for shoes on your soles, you're able to stay on your feet all winter. Find out more about Grip Studs by visiting their...

Advertisement
Read more
Read more
Similar to
Popular now
Just for you