Page 1

OUTBACK HEAVY WELDING World class protection, durability and comfort


OUTBACK HEAVY WELDING − DURABLE GARMENTS YOU’LL WANT TO WEAR


DURABILITY, COMFORT AND OUTSTANDING PROTECTION With our new OUTBACK HEAVY WELDING series, you’ll enjoy the benefits of a newly developed flame retardant material created from a unique mix of inherent fibers. Because the flame retardant characteristics are found in the molecular structure of the fibers, they cannot be washed or worn out, unlike garments that are treated with chemical agents. The result is a range that combines world-class protection with extended product life, making OUTBACK HEAVY WELDING a smarter, safer and more economical long-term solution.


SIX YEARS OF DEVELOPMENT − NOW IT’S OVER TO YOU Creating industry leading flame retardant workwear is a painstaking process. In this case, over six years of research, testing and development led to a technical breakthrough and the creation of unique material with superior levels of performance. AN INVESTMENT IN LONG-TERM VALUE AND PERFORMANCE During extensive testing, the Outback Heavy Welding series was shown to have a longer life than other comparable garments. These high levels of durability mean that your initial investment lasts much longer, reducing the Total Cost of Ownership.


COMFORT WITHOUT COMPROMISE Too heavy? Too stiff? Too warm? Until now, it has often been the case with welding garments that comfort and freedom of movement are sacrificed for safety. Why not strive to ensure all these qualities can also be combined with your protection? The Outback Heavy Welding range was developed with these issues very much in focus – and the results speak for themselves. Indeed, in an extensive series of tests conducted by a leading Swedish industrial group, the garments were awarded a score of 9/10.

Breathing panels on the back and under the arms increase comfort.

Visible at work for your enhanced protection.

Lightweight feel and soft fabric places less stress on the wearer.

Comfortable without compromising protection. Low shrinkage in industrial laundry.

Ergonomic design with pre-shaped arms and legs helps optimise comfort and freedom of movement.


WELDING GARMENTS

EN ISO 11612 A1 B1 C1 F1

IEC 61482-2 CL.2

EN 1149-5

EN ISO 11611 CL.2 A1

EN 13034 type PB[6]

5535 86 WELDING JACKET Welding jacket is a very comfortable fabric with extremely good welding properties and protection against radiant heat and metal splashes. Ergonomically shaped and pre-shaped sleeves to avoid creasing from metal splashes. Concealed zip and press stud closing. High collar for extra protection and adjustable width. Chest pockets with flaps. Side pockets with flaps. Sleeve pocket with flap, concealed keyring holder and strap for ID-pocket. Arm ventilation. Extended back with ventilation and reflective stripe. Adjustable waist and cuffs. Inside pocket. Fluorescent piping on chest and back. Concealed ventilation in arm, fluorescent piping on front and back. Concealed ventilation opening on the back with reflective stripe for extra visibility. Size: Colour: Quality:

XS-4XL 67 anthracite 863: Outback HW, 425 g/m², EN ISO 11612 E3

c95mt

EN ISO 11612 A1 B1 C1 F1

IEC 61482-2 CL.2

EN 1149-5

EN ISO 11611* CL.2 A1

EN 13034 type PB[6]

5550 86 WELDING TROUSERS WITH TOOL POCKETS

Welding trousers in a very comfortable fabric with extremely good welding properties and protection against radiant heat and metal splashes. Tool pockets with tool strips. Side pockets. Thigh pocket with flaps. Shaped knees with adjustable inside kneepad pockets. Hip pockets with flaps. Ruler pocket with adjustable opening. Fluorescent fabric on legs. Reinforcement fabric on leg hem. *To meet the requirements for EN ISO 11611, openings of the nail pockets must be covered by the jacket 5535 during welding. Size: Colour: Quality:

30”-50”R, 32”-40”T, 30”-48”S 67 anthracite 863: Outback HW, 425 g/m², EN ISO 11612 E3 803: Barricader EP, 545 g/m² 804: Reinforcing fabric, HTFR Dobby, 270 g/m²

c95mt

EN ISO 11612 A1 B1 C1 F1

IEC 61482-2 CL.2

EN 1149-5

EN ISO 11611 CL.2 A1

EN 13034 type PB[6]

5522 86 WELDING TROUSERS Welding trousers in a very comfortable fabric with extremely good welding properties and protection against radiant heat and metal splashes. Side pockets. Thigh pocket with flaps. Shaped knees with adjustable inside kneepad pockets. Hip pockets with flaps. Ruler pocket with adjustable opening. Fluorescent fabric on legs, Reinforcement fabric on leg hem. Size: Colour: Quality:

30”-50”R, 32”-40”T, 30”-48”S 67 anthracite 863: Outback HW, 425 g/m², EN ISO 11612 E3 803: Barricader EP, 545 g/m² 804: Reinforcing fabric, HTFR Dobby, 270 g/m²

c95mt


EN ISO 11611 Accessory

5572 19 CHAPS Size: Colour: Quality:

One size 67 anthracite 191: Graphite, 240 g/m²

b93ot

EN ISO 11612 Accessory

EN ISO 11611 Accessory

5573 80 PONCHO Size: Colour: Quality:

One size 07 black 801: Barricader TC, 545 g/m² 882: Cantex 2.0, 350 g/m², EN 13034, LOI: 32,3%

c95mt

EN ISO 11611 Accessory

5575 19 APRON EN ISO 11612 A1 B1 C1 F1

IEC 61482-2 CL.2

EN 1149-5

EN ISO 11611 CL.2 A1

EN 13034 type PB[6]

Size: Colour: Quality:

5512 86 WELDING BOILERSUIT

One size 67 anthracite 191: Graphite, 240 g/m²

b93ot

Welding boilersuit in a very comfortable fabric with extremely good welding properties and protection against radiant heat and metal splashes. Ergonomically shaped and pre-shaped sleeves to avoid creasing from metal splashes. Concealed 2-way zip and press stud closing. High collar for extra protection and adjustable width. Chest pockets with flaps. Sleeve pocket with flap and concealed keyring holder and strap for ID-pocket. Arm ventilation, Side pockets with hidden access. Adjustable elastic waist band. Ventilation and reflective stripe on the back. Hip pockets with flaps. Thigh pocket with flaps. Ruler pocket with adjustable opening. Shaped knees with adjustable inside kneepad pockets. Adjustable cuffs. Fluorescent fabric on legs and piping on chest and back. Reinforcement fabric on leg hem.

5576 19 APRON WITH COLLAR

Size: Colour: Quality:

Size: Colour: Quality:

XS-4XL 67 anthracite 863: Outback HW, 425 g/m², EN ISO 11612 E3 803: Barricader EP, 545 g/m² 804: Reinforcing fabric, HTFR Dobby, 270 g/m²

c95mt

EN ISO 11611 Accessory

One size 67 anthracite 191: Graphite, 240 g/m²

b93ot


Tranemo Textil AB was established in 1934. Today, Tranemo is dedicated to preventing work related injuries by developing innovative inherent flame retardant, high visibility and high quality workwear. By sharing expertise, we at Tranemo help our customers strive towards a safer workplace.

www.tranemo.com

TRANEMO Outback Heavy Welding, UK