Application Tooling
Features • Dereel system for discrete wire or cable available • Double- or single-ended harness capabilities without strip • Single-ended harness capabilities with strip; 38mm (1.150") • Full strip for discrete wire • Strip and retain for cable • Up to 56 terminations per cycle (dependent on circuit size) • Discrete wire with variable length capability; harness length of 152mm (6") min. to 2400mm (95") max. • Missing wire and splice detector • Magazine feed for connector loading • Continuity testing (double-ended assemblies) • Hot stamp marking • Reject station to segregate rejected assemblies • “CE” certified
Fully Automatic Harness Assembly Machine for KK Series IDT Connectors
Description
Order No.
Connector
Fully Automatic Mass Terminator for Discrete Wire and Ribbon Cable
Contact Molex
KK® Series IDT
Specifications Pneumatic: P ressure—5 BAR (80psig) Consumption—142L per minute (5 CFM) Electrical: V oltage—120V, 60 Hz or 220V, 50 Hz Current—30A at 120V or 15A at 220V Rate: 300 cycles per hour average, dependent on harness length
*Due to the special nature of these machines, contact Molex for information related to specific harness requirements
Features • Dereel system for discrete wire or cable available • Double- or single-ended harness capabilities without strip • Single ended harness capabilities with strip; 38mm (1.150") • Full strip for discrete wire • Strip and retain for cable • Up to 56 terminations per cycle (dependent on circuit size) • Discrete wire with variable length capability; harness length of 152mm (6") min. to 2400mm (95") max. • Missing wire and splice detector • Magazine feed for connector loading • Continuity testing (double-ended assemblies) • Hot stamp marking • Reject station to segregate rejected assemblies • “CE” certified
Description
Order No.
Connector
Fully Automatic Mass Terminator for Discrete Wire and Ribbon Cable
Contact Molex
KK® Series IDT
Specifications Pneumatic: P ressure—5 BAR (80psig) Consumption—142L per minute (5 CFM) Electrical: V oltage—120V, 60 Hz or 220V, 50 Hz Current—30A at 120V or 15A at 220V Rate: 300 cycles per hour average, dependent on harness length
Application Tooling
Fully Automatic Harness Assembly Machine for KK Series IDT Connectors
Due to the special nature of these machines, contact Molex for information related to specific harness requirements
U
www.molex.com/product/apptool/
MX10
U-45