Page 1

Exam 920­471 study material Made available by  Aonetesting.com

 

Free 920­471 Exam Preparation  Questions  Exam  920­471    : Nortel Converged Office for CS 1000 Rls. 5.x Configuration & Networking

For Latest 920­471 Exam Questions and study guides­ visit­ http://www.aonetesting.com/920­471.html


Question:1 To enable and configure H.323 on a Communication Server 1000 Rls. 5.0 system, which software component on the Signaling Server must you enable first using Element Manager? A. Network Routing Server B. SIP Gateway (Virtual Trunk) C. Terminal Proxy Server (TPS) D. H.323 Gateway (Virtual Trunk) Answer: D Question:2 The Network Routing Service consists of three basic components: Network Protocol, Database Synchronization, and Database. Which component(s) combines a SIP Redirect Server, SIP Registrar, H.323 Gatekeeper, and Network Connection Service into a single application for networkbased routing? A. Database component B. Call Server component C. Network protocol component D. Database synchronization and database component Answer: C Question:3 Which Emergency Services Access (ESA) feature lets users log in to any IP telephone using the users' User ID and password? A. E911 for Virtual Office B. Networked M911 Service C. Bandwidth Management Support for ESA D. Basic Emergency Service When VO Logged Out Answer: A Question:4 You have launched the Network Routing Service (NRS). While attempting to perform configuration tasks, you find that you have read-only permissions. Which is your next step? A. Log out of the NRS and log in with the Level 2 ID and password. B. Log out of the NRS and log in with the Admin User ID and password. C. Remain logged into the NRS and create a new Level 1 Service Domain. D. Remain logged into the NRS and create an Admin User ID and password. Answer: B Question:5 Due to Directory Number conflicts in the Communication Server 1000 Rls. 5.0 network, the customer wants to route calls by Home Location Codes (HLOC) and Location Codes (LOCs). Given the following Home Location Codes: HLOC for System A = 329 HLOC for System B = 429 Which is the correct LOC to assign to System A? A. LOC for System A = 3 B. LOC for System A = 34 C. LOC for System A = 329 D. LOC for System A = 429

For Latest 920­471 Exam Questions and study guides­ visit­ http://www.aonetesting.com/920­471.html


Answer: D Question:6 You are implementing IP Peer Networking in a Communication Server 1000 Rls. 5.0 network. For correct call routing, the digits dialed by users must be manipulated to conform to the dialing requirements of the trunk. Which is a property of digit manipulation? A. It is only available for primary rate circuits. B. It has the ability to delete and insert leading digits. C. Programming is shared across all network switches. D. It uses 64 tables, each referenced by a table number. Answer: B Question:7 You are using Element Manager to program a Route List Index (RLI). Which Electronic Switched Network (ESN) parameters must you define first to be able to successfully program an RLI? A. Routing Control (RTCL) B. Maximum number of route lists (MXRL) C. Expensive Route Warning Tone (ERWT) D. Maximum number of Special Common Carriers (MSCC) Answer: B Question:8 A company recently deployed IP telephones in its Call Center. During peak traffic conditions, callers receive an overflow tone and calls are blocked. Assume the following settings: Zone Number = 1 Zone Intent = MO Intrazone Traffic = Best Quality Interzone Traffic = Best Bandwidth Resource Type = Shared Which programming change is recommended in Element Manager (LD 117) to provide dedicated Digital Signal Processor (DSP) resources to Contact Center IP telephones? A. Change Zone Intent to VTRK B. Change Resource Type to Private C. Change Interzone Traffic to Best Quality D. Change Intrazone Traffic to Best Bandwidth Answer: B Question:9 You are implementing an IP Peer Networking solution in a network that includes three Communication Server 1000E Rls. 5.0 systems equipped with Nortel CP-PM Signaling Servers. The basic Call Server programming for System 1 has already been completed, and you have logged out of the Call Server. Which IP address would you enter in the address field of the workstation web browser to access the Network Routing Service without launching Element Manager? A. IP address of the System Call Server B. IP address of the System Primary Host C. IP address of the Network Routing Service D. IP address of the Network Connection Manager Answer: C

For Latest 920­471 Exam Questions and study guides­ visit­ http://www.aonetesting.com/920­471.html


For complete Exam 920-471 Training kits and Self-Paced Study Material Visit: http://www.aonetesting.com/920-471.html

http://www.aonetesting.com/

For Latest 920­471 Exam Questions and study guides­ visit­ http://www.aonetesting.com/920­471.html

Exam 920-471 Preparation Questions  

Aonetesting the leading source in certification preparation services, all certification guaranteed study material, question and answers, pra...