Page 1

Ball Mount Hitches

Adjustable Ball Mount Hitches Special Purpose Ball Mount Hitches Heavy Duty ION Forged Ball Mounts Aluminium ION Forged Ball Mounts Hitch Extenders Pintle Hooks and Pintle Mounts Multi-Purpose Hitch Receivers Hitch Anti-Rattle Devices

Towsafe Ball Weight Scales Weight Distribution Systems

Sway Control Device Coupling & Hitch Security Products

INTERTRADE HOLDINGS PTY LTD UNIT 1, 2 TIDAL WAY BIBRA LAKE 6163 WA TEL: 08 9418 7044 FAX: 08 9418 7983 info@intertradeholdings.com.au www.intertradeholdings.com.au


PRICES: PRICES LISTED IN OUR PRICE LIST ARE SUBJECT TO 10% GST AND THE PRICES ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE GIVEN. RETURNS: GOODS WILL ONLY BE ACCEPTED FOR RETURN IF PRIOR ARRANGEMENT HAS BEEN OBTAINED. ANY GOODS RETURNED MUST BE IN RESALEABLE CONDITION AND RETURNED WITHIN 7 DAYS FROM INVOICE DATE. ANY GOODS RETURNED “NOT REQUIRED” WILL BE SUBJECT TO A 15% RE-STOCKING AND HANDLING FEE. WARRANTY RETURNS WILL NOT BE ACCEPTED UNLESS PRIOR AUTHORISATION HAS BEEN GIVEN. INTERTRADE RETAINS THE RIGHT TO EXCHANGE, REPAIR OR ISSUE A CREDIT. ANY RETURNS MUST BE RETURNED, FREIGHT PRE-PAID TO OUR WAREHOUSE SHOWING : A. DESCRIPTION OF GOODS. B. PROOF OF PURCHASE. C. FULL DESCRIPTION OF COMPLAINT (“FAULTY” OR ANY OTHER INDECISIVE DECRIPTION WILL NOT BE ACCEPTED). D. DATE OF INSTALLATION PAYMENT AND TITLE: ALL PRODUCTS SOLD REMAIN THE PROPERTY OF INTERTRADE HOLDINGS PTY LTD UNTIL THE PAYMENT FOR THE GOODS HAS BEEN MADE IN FULL. PAYMENT MUST BE MADE WITHIN 30 DAYS FROM END OF MONTH (NO EXCEPTIONS). CREDIT WILL CEASE IF INVOICES ARE NOT PAID WITHIN THE AGREED TERMS SET DOWN IN THIS DOCUMENT. ACCOUNT CUSTOMERS ARE REQUIRED TO SPEND AN AVERAGE OF $500.00 EX GST PER MONTH. CUSTOMERS WHO DO NOT COMPLY WITH THESE TERMS WILL ONLY BE SUPPLIED GOODS ON A C.O.D. BASIS. NON-PAYMENT OF ACCOUNTS MAY RESULT IN LEGAL ACTION TAKEN. ORDERS: ORDERS SHOULD BE PLACED VIA EMAIL OR FAX. ORDERS MUST STATE INTERTRADE’S PART NUMBER AND THE QUANTITY REQUIRED. INTERTRADE TAKES NO RESPONSIBILTY FOR GOODS INCORRECTLY ORDERED. WARRANTY: ALL PRODUCTS SOLD BY INTERTRADE HAVE A 12 MONTH MANUFACTURERS WARRANTY AGAINST DEFECTS. (MISTER HITCHES BALL MOUNTS AND WDH SYSTEMS HAVE A 25 YEAR WARRANTY, MISTER CANS METAL CANS HAVE A 10 YEAR WARRANTY, MISTER CANS PLASTIC FUEL AND WATER HAVE 5 YEAR WARRANTY. WARRANTIES ARE VOID IF THE GOODS ARE MODIFIED IN ANY WAY, USED FOR THE PURPOSE NOT ORIGINALLY INTENDED, MISUSE, ACCIDENTAL DAMAGE, LACK OF MAINTENENCE AND OR PROPER CARE, INCORRECT FITMENT OR USED IN ‘OFF ROAD” SITUATIONS. INTERTRADE RECOMMENDS ALL TRAILER PRODUCTS ARE INSTALLED BY A QUALIFIED TRADESMAN. INTERTRADE ACCEPT NO RESPONSIBILITY FOR ANY LOSS OR DAMAGE CAUSED BY FAULTY GOODS, MODIFIED, USED FOR THE PURPOSE NOT ORIGINALLY INTENDED, MISUSE, ACCIDENTAL DAMAGE, NEGLECT, LACK OF MAINTENENCE AND OR PROPER CARE, NON-COMPLIANCE WITH ADR OR INCORRECT FITMENT. WARRANTY RETURNS WILL NOT BE ACCEPTED UNLESS PRIOR AUTHORISATION HAS BEEN GIVEN. ALL WARANTY CLAIMS MUST BE RETURNED TO INTERTRADE FOR INSPECTION (NO EXCEPTIONS). INTERTRADE RETAINS THE RIGHT TO EXCHANGE, REPAIR OR ISSUE A CREDIT. ANY RETURNS MUST BE RETURNED, FREIGHT PRE-PAID TO OUR WAREHOUSE SHOWING : A. DESCRIPTION OF GOODS. B. PROOF OF PURCHASE. C. FULL DESCRIPTION OF COMPLAINT (“FAULTY” OR ANY OTHER INDECISIVE DECRIPTION WILL NOT BE ACCEPTED). D. DATE OF INSTALLATION

COPYRIGHT: NTP, NATIONAL TRAILER PARTS, MISTER HITCHES, ION FORGED, LOCK N GO, MISTERCANS, TOWSAFE, AIRPOWER, MAKIN’ TRAX , ADDA-RAK AND KAKADOO ARE REGISTERED TRADEMARKS OF INTERTRADE HOLDINGS PTY LTD. THESE TRADEMARKS ARE NOT TO BE USED WITHOUT THE WRITTEN CONSENT OF INTERTRADE HOLDINGS PTY LTD. REPRODUCTION OR USE OF ANY TEXT OR IMAGES SHOWN IN THIS CATALOGUE MUST NOT BE USED WITHOUT THE WRITTEN CONSENT OF INTERTRADE HOLDINGS PTY LTD.


In just several short years of product development and testing the Mister Hitches brand of towing products has now become a well recognized and trusted name in towing products. Our ball mounts are made in our Taiwan factory and are manufactured to our strict quality standards. All welding is robotic so as to ensure absolute quality and consistency. We also pride ourselves in the ability to react quickly to our customers enquiries and in turn develop unique product solutions for the towing market.

Features of our product • Robotic welded for consistent quality and strength • CNC machined for maximum accuracy • Powder coated drop forged steel for durability • Made to comply with Australian Standards & ADR where required • Ball mounts are tested to SAE J684 / V-5 standards* • 25 Year structural warranty. THINGS TO KNOW G.T.W. (gross trailer weight) is the weight of the trailer fully loaded. The G.T.W. should never exceed the vehicles tow bar capacity. T.W. (tongue weight) is the downward force that is exerted on the tow ball by the trailer. The T.W. is determined by the position of the load in the trailer. All Mister Hitches products comply to ADR where applicable.

SELECTING A BALL MOUNT 1. Measure from the top of the receiver opening on the back of the vehicle to the ground with a tape measure. This is known as the hitch height. Make note of this measurement. 2. Place a level on the tongue of the trailer and make sure it is sitting level on the ground. The tongue is the straight piece of metal that has the coupling attached. 3. Measure from the bottom of the coupling to the ground. This is known as the trailer height. Make a note of this measurement as well. Subtract the measurement taken in Step 3 from the measurement taken in Step 1. If the hitch height is greater than the trailer height, this is the drop that is needed for the ball mount. If the trailer height is greater than the hitch height, this is the rise that is needed for the ball mount

DETERMINING BALL MOUNT Measure the distance from platform to the top of the shank with the tape measure to find the drop distance Turn the ball mount upside down and measure from the top of the ball platform to the top of the shank to find the rise distance. Measure the hole of the ball diameter on the ball mount with the tape measure. This will determine the size of shank that is required for the ball you need. Choose the ball mount that is needed based on the measurements you have taken.


HITCHES & ACCESSORIES STANDARD BALL MOUNTS • • • •

BLACK POWDER COATED FINISH FITS 2” SQUARE RECEIVERS (TOWBARS) COMPLIES WITH SAE J684 /V-5 STANDARDS ROBOTIC WELDED FORGED STEEL

Part No.

MH001 MH002 MH314 MH006

Rating (kg) GTW/TW

2722/272 2722/272 2268/227 2268/227

Ball Hole Size Drop

7/8” 7/8” 7/8” 7/8”

50mm 50mm 83mm 152mm

Rise

19mm 19mm 50mm 121mm

Length

190mm 254mm 273mm 292mm

Note: Length measurement is from centre of ball hole to centre of pin hole

BALL MOUNTS - HEAVY DUTY • • • • • •

BLACK POWDER COATED ENAMEL FINISH SUPER HEAVY DUTY CAPACITY 3650kg G.T.W. 365kg T.W. FITS 2” SQUARE RECEIVERS HEAVY DUTY 25mm X 75mm BALL PLATFORM MADE FROM HIGH GRADE STEEL ROBOTIC WELDED FORGED STEEL

Part No. MH001HD MH002HD MH004HD

Rating (kg) GTW/TW 3650/365 3650/365 3650/365

Ball Hole Size Drop 7/8” 7/8” 7/8”

57mm 57mm 102mm

Rise 31mm 31mm 76mm

Length 211mm 254mm 254mm

Note: Length measurement is from centre of ball hole to centre of pin hole

BALL MOUNTS LONG REACH • • • •

BLACK POWDER COATED FINISH LONGER REACH SHANK THAN STANDARD BALL MOUNTS ROBOTIC WELDED FORGED STEEL, CNC MACHINED MH002LSHD: SOLID SHANK, 75mm x 25mm 90 DEGREE BALL PLATFORM, GTW 3650KG HEAVY DUTY.

Part No.

Rating (kg) GTW/TW

MH002LS 2722/272 MH002LSHD 3650/365

Ball Hole Size Drop 7/8” 7/8”

50mm 57mm

MH002LS

Rise

Length

19mm 31mm

322mm 322mm

MH002LSHD


BALL MOUNTS 32mm x 32mm • • • • •

BLACK POWDER COATED FINISH FOR CORROSION PROTECTION FITS 32mm x 32mm (1-1/4” X 1-1/4” ) RECEIVERS (EG. HOLDEN TRAX) SOLID STEEL SHANK ROBOTIC WELDED FORGED STEEL FOR ADDED STRENGTH CNC MACHINED FOR CONSISTENCY

Part No.

Rating (kg) GTW/TW

MH3232 MH3289

1600/160 1600/160

Ball Hole Size Drop 7/8” 7/8”

32mm 89mm

Rise

Length

19mm 76mm

203mm 241mm

HITCH ADAPTER 32mm to 50mm • • • •

RECEIVER ADAPTER CONVERTS A 32mm (1-1/4” ) RECEIVER TO A 50mm RECEIVER (SUITABLE FOR HOLDEN TRAX O.E.M. TOWBAR) SOLID STEEL SHANK, 160kg T.W. (VERTICAL CAPACITY) ROBOTIC WELDED FORGED STEEL FOR ADDED STRENGTH CNC MACHINED FOR CONSISTENCY, POWDER COATED

Part No. MHA3250

Rating (kg) TW 160

Pin Hole Size 5/8”

Length (Pin Hole to Pin) 183mm

BALL MOUNTS 40mm x 40mm • • • •

BLACK POWDER COATED FINISH FOR CORROSION PROTECTION FITS 40mm x 40mm RECEIVERS (TOWBARS) EG. SUBARU , SOME COMMODORES ETC ROBOTIC WELDED FORGED STEEL FOR ADDED STRENGTH CNC MACHINED FOR CONSISTENCY

Part No. MH402 MH404

Rating (kg) GTW/TW 1600/160 1600/160

Ball Hole Size Drop 7/8” 7/8”

50mm 82mm

Rise

Length

30mm 61mm

220mm 239mm

HITCH ADAPTER 40mm to 50mm • • • • •

RECEIVER ADAPTER CONVERTS A 40mm RECEIVER TO A 50mm RECEIVER 160kg T.W. (VERTICAL CAPACITY) ROBOTIC WELDED FORGED STEEL FOR ADDED STRENGTH CNC MACHINED FOR CONSISTENCY BLACK POWDER COATED FINISH FOR CORROSION PROTECTION

Part No. MHA4050

Rating (kg) TW 160

Pin Hole Size 5/8”

Length (Pin Hole to Pin) 208mm


ALUMINIUM H/DTY FORGED BALL MOUNTS 3630Kg • • • • • •

LIGHTWEIGHT BUT SUPER STRONG MADE FROM ONE PIECE 6061 GRADE ALUMINIUM FITS 2” SQUARE RECEIVERS HARD ANODIZED FOR A SUPERIOR FINISH AND LONG LASTING FULLY REVERSIBLE - WELD FREE - BALL HOLE: 23mm SAE J684 V-5 TESTED AND CERTIFIED

Part No. MHFBMA2 MHFBMA4 MHFBMA6

Rating (kg) GTW/TW

Drop

Rise

Length

3630/363 3630/363 3630/363

51mm 102mm 152mm

25mm 80mm 130mm

203mm 205mm 237mm

Weight 1.5kg 1.6kg 1.9kg

MHFBMA2

MHFBMA4

ONE PIECE ALUMINIUM

MHFBMA6

HEAVY DUTY FORGED STEEL BALL MOUNTS 4500Kg • • • • • •

DROP FORGED SOLID STEEL CONSTRUCTION FITS 2” SQUARE RECEIVERS POWDER COATED FINISH FULLY REVERSIBLE - WELD FREE SAE J684 TABLE 3 TESTED AND CERTIFIED HITCH PIN HOLE: 16.5mm (5/8”) TOW BALL HOLE: 23mm (7/8”)

Part No. MHFBMS2 MHFBMS4 MHFBMS6

Rating (kg) GTW/TW 4500/450 4500/450 4500/450

MHFBMS2

Ball Hole Size Drop 7/8” 7/8” 7/8”

51mm 102mm 152mm

Rise 25mm 80mm 130mm

Length 190mm 224mm 242mm

MHFBMS4

ONE PIECE SOLID STEEL

MHFBMS6


SUPER DUTY FORGED BALL MOUNTS 4500Kg • • • • •

Meets V-5 & SAE J684 BLACK POWDER COATED FINISH, 25mm THICK BALL PLATFORM Requirements DROP FORGED FROM ONE PIECE OF SOLID STEEL– WELD FREE FITS 2” SQUARE RECEIVERS - FULLY REVERSIBLE GTW/TW OF 4500/450Kg WHEN USED WITH A 4.5T RATED 70MM TOW BALL (PART No. NTB70CB) GTW/TW OF 3500/350Kg WHEN USED WITH A 3.5T RATED 50MM TOW BALL AND REDUCING BUSH TO ENABLE THE 50MM BALL TO FIT TO 1 1/4” BALL HOLE OF THE FORGED BALL MOUNT. (BUSH PART No. MHRB)

Part No. MHFBM2 MHFBM4 MHFBM6 MHRB

Rating (kg) GTW/TW

Ball Hole Size Drop

Rise

4500/450 32mm (1 1/4”) 50mm 25mm 4500/450 32mm (1 1/4”) 102mm 76mm 4500/450 32mm (1 1/4”) 152mm 127mm TOW BALL HOLE REDUCING BUSH 1-1/4” to 7/8”

Length 224mm 243mm 275mm ONE PIECE SOLID STEEL

Note: GTW/TW 4500/450Kg BASED ON USING A 4.5T 70MM TOW BALL GTW/TW 3500/350Kg WHEN USED WITH A 3.5T 50MM TOW BALL

SUPER DUTY 4500Kg GTW

DROP FORGED

YOUR TOWING CAPACITY IS LIMITED TO THE LOWEST RATED TOWING COMPONENT: BE IT, THE TOW BAR, BALL MOUNT, TOW BALL OR TRAILER COUPLING.

4500KG RATED 70MM TOW BALL ALSO AVAILABLE PART NO. NTB70CB

HOW TO MEASURE A BALL MOUNT


ADJUSTABLE BALL MOUNT • • • • • • • •

BLACK POWDER COATED FINISH, 75mm x 20mm BALL PLATFORM FITS 2” SQUARE RECEIVERS - REVERSIBLE ROBOTIC WELDED FORGED STEEL FOR ADDED STRENGTH WITH 12.9 GRADE HIGH TENSILE 16mm x 40mm BOLTS 5 HOLE 12 STAGE ADJUSTMENT, REVERSIBLE 6 STAGE DROP 80/110/130/140/160/190mm 6 STAGE RISE 50/80/100/110/130/165mm QUALITY MADE PRODUCT FROM TAIWAN

Part No.

Rating (kg) GTW/TW

MHABM-5T

2500/250

Ball Hole Size 7/8”

Max. Drop

Max. Rise

Length

180mm

145mm

295mm

12 ADJUSTMENT POSITIONS

ADJUSTABLE BALL MOUNT SUPER DUTY 4000Kg • • • • • • • • •

A HEAVY DUTY 25mm x 75mm BALL PLATFORM SUPPORT GUSSETS FOR ADDED STRENGTH FITS 2” SQUARE RECEIVERS ROBOTIC WELDED FORGED STEEL FOR ADDED STRENGTH WITH 12.9 GRADE HIGH TENSILE BOLTS 5 HOLE 12 STAGE ADJUSTMENT, REVERSIBLE 6 STAGE DROP 80/110/130/140/160/190mm 6 STAGE RISE 50/80/100/110/130/160mm CNC MACHINED, ROBOTIC WELDED FOR STRENGTH

Part No.

Rating (kg) GTW/TW

MHABM-5XHD

4000/400

25mm x 75mm BALL PLATFORM

9MM THICK DUAL SUPPORT GUSSETS

12.9 GRADE HIGH TENSILE BOLTS

Ball Hole Size

Max. Drop

Max. Rise

Length

7/8”

190mm

160mm

305mm

ADJUSTABLE BALL MOUNT • • • • • • • • •

BLACK POWDER COATED FINISH FITS 2” SQUARE RECEIVERS TESTED IN THE U.S. TO COMPLY WITH SAE J684 /V-5 STANDARDS ROBOTIC WELDED FORGED STEEL 432mm (17”) OF ADJUSTABLE VERTICAL TRAVEL INCLUDES 2 x 5/8” HITCH PINS AND CLIPS STRENGTHENING SUPPORT GUSSET REVERSIBLE SHANK AND REVERSIBLE BALL PLATFORM QUICK AND EASY ADJUSTMENTS

Part No. MHABM MHABMP

Rating (kg) GTW/TW

Ball Hole Size

2722/272 7/8” Replacement Ball Platform

Max. Drop

Max. Rise

Length

232mm

200mm

305mm


SPECIALTY HITCHES ADJUSTABLE MULTI-USE BALL MOUNT • • • • • • • •

NOW YOU CAN TOW AND USE YOUR RECEIVER MOUNTED BIKE CARRIER AT THE SAME TIME! 2’ X 2” RECEIVER MOUNTED ON TOP OF BALL MOUNT SAE J684 V-5 TESTED AND CERTIFIED 432mm OF VERTICAL ADJUSTMENT QUICK AND EASY TO ADJUST TOWING HEIGHT MAX DROP: 232mm MAX RISE: 200mm TOP RECEIVER NOT TO BE USED FOR TOWING - CAPACITY 160KG POWDER COATED - ROBOTIC WELDED SEAMS

Part No. MHABM-MU

Rating (kg) GTW/TW 2722/272

Max. Drop

Max. Rise

232mm

Length

200mm

305mm

MULTI-USE BALL MOUNT •

• • •

NOW YOU CAN TOW AND USE YOUR RECEIVER MOUNTED BIKE CARRIER AT THE SAME TIME! 2’ X 2” RECEIVER MOUNTED ON TOP OF BALL MOUNT TOP RECEIVER NOT TO BE USED FOR TOWING - CAPACITY 160KG POWDER COATED - ROBOTIC WELDED SEAMS

Part No. MHSBM-1

Rating (kg) GTW/TW

Drop

Length

2722/272

51mm

316mm

TOP RECEIVER CAPACITY 160kg TOWING CAPACITY TOP RECEIVER SUITABLE FOR MOUNTING A BIKE CARRIER OR OTHER RECEIVER MOUNTED

REVERSIBLE AND ADJUSTABLE BALL PLATFORM HITCH PIN & CLIPS ALLOW FOR QUICK HEIGHT ADJUSTMENTS

432mm OF ADJUSTABLE VERTICAL TRAVEL


SPECIALTY HITCHES

BALL MOUNT RECEIVER ADAPTER 50MM SQUARE RECEIVER OPENING

WELDED RING TIE DOWN POINT

22MM BOLT AND NUT FITS TO TOW BALL HOLE

CAPACITY: MAX G.T.W. 1800kg MAX T.W. 180kg

NOTE: YOUR TOWING CAPACITY IS BASED ON THE

LOWEST RATED COMPONENT OF YOUR TOWING SYSTEM.

FEATURES: IDEAL FOR USE ON ATV’S, UTV’S, FARM MACHINERY & WHEN A 50MM RECEIVER OPENING IS REQUIRED Eg. BIKE CARRIERS • 50MM (2”) SQ. RECEIVER OPENING. • WELDED RING FOR A CONVENIENT TIE DOWN POINT. • FEATURES A STABILIZING PLATE TO PREVENT SIDE SWIVEL MOVEMENT. • INCLUDES A 22mm BOLT & NUT FOR MOUNTING. • INCLUDES A HITCH PIN & CLIP • ROBOTIC WELDED HIGH STRENGTH STEEL. • POWDER COATED BAKED ON ENAMEL FOR CORROSION PROTECTION. • 25 YEAR WARRANTY

Part No. MHBMRA

Rating (kg) GTW/TW

HITCH PIN & CLIP ANTI-SWIVEL STABILIZING PLATE AND HARDWARE

EXAMPLES OF THE USE OF THE BALL MOUNT RECEIVER ADAPTER 2 BOLT FLAT STYLE TONGUE BIKE CARRIER STANDARD 50MM BALL MOUNT

A.T.V. AND U.T.V. OEM HITCH BALL MOUNT 40MM BALL MOUNT

Receiver Length

1800/180

90mm

50MM O.D. SQUARE VERTICAL RECEIVER

VERTICAL RECEIVER ADAPTER

• MULTI-HOLE ADJUSTMENT IN VERTICAL RECEIVER • POWDER COATED BAKED ON ENAMEL FOR CORROSION RESISTANCE. • ROBOTIC WELDED HIGH STRENGTH STEEL NOTE: YOUR TOWING CAPACITY IS BASED ON THE

Part No.

Pin Hole Size

MHVRA

2270/227

5/8”

50MM O.D.

35MM

35MM 140MM 35MM

LOWEST RATED COMPONENT OF YOUR TOWING SYSTEM.

Rating (kg) GTW/TW

MULT-HOLE ADJUSTMENT

35MM

MHVRA DIMENSIONS

Overall Length 205mm

114MM 205MM

61MM

50MM I.D. SQUARE HORIZONTAL RECEIVER OPENING


CLEVIS MOUNTS • • • • •

BLACK POWDER COATED FINISH ROBOTIC WELDED FORGED STEEL MHCM: 7/8” (22mm) CLEVIS PIN HOLES MHCM1: 1” (25.4mm) CLEVIS PIN HOLES FITS 2” X 2” RECEIVER TUBES, CAN BE USED AS A BALL MOUNT

Part No.

Rating (kg) GTW/TW

Pin Hole Size

Length

MHCM MHCM1

2722/272 2722/272

7/8” (22mm) 1” (25.4mm)

248mm 248mm

CLEVIS MOUNT MULTI-USE SET UP THIS SET UP IS SPECIALLY DESIGNED FOR FARMING OR INDUSTRIAL USE. USING A MHCM1 CLEVIS MOUNT WITH 25.5mm CLEVIS HOLES COUPLED TOGETHER WITH A 3500kg X 50mm LONG SHANK TOW BALL AND PROTECTION SLEEVE, THIS SET UP CAN BE USED WITH A BALL COUPLING AND ALSO A RING COUPLING.

COMPONENTS CONSISTS OF: MHCM1: CLEVIS MOUNT WITH 25.4mm holes NTP5045CB: 50mm TOW BALL WITH 25.4mm dia SHANK, SHANK LENGTH OF 114.3mm (4.5”) 3500kg CAPACITY. ADR COMPLIANT MHCMS: PROTECTION SLEEVE TO REDUCE WEAR TO THE TOW BALL SHANK. 25.4mm I.D., 31.4mm O.D. ZINC PLATED NOTE: COMPONENTS SOLD SEPARATLEY Part No.

MHCM1 MHCMS NTB5045CB

Description CLEVIS MOUNT WITH 25.4mm HOLES CLEVIS MOUNT PROTECTION SLEEVE TOW BALL 50mm x 25.4mm dia SHANK 114.3mm SHANK LENGTH 3500kg CAP. ADR COMPLIANT

CLEVIS MOUNT PINS • • • •

HARDENED STEEL CLEVIS PINS ZINC PLATED FOR CORROSION RESISTANCE MHCMP & MHCMP1: WITH CLEVIS LOCKING RING PIN & CHAIN MHCMP2: WITH 4mm RETAINING CLIP

Part No. MHCMP MHCMP1 MHCMP2

Rating (kg) GTW/TW

Pin Hole Size

Length

Clevis pin 22mm 160mm useable length Clevis pin 25.4mm 160mm useable length Clevis pin 22mm 100mm useable length

MHCMP

MHCMP1

MHCMP2


HITCH RECEIVER EXTENDERS • • • • •

BLACK POWDER COATED FINISH FITS 2” SQUARE RECEIVERS USED FOR BIKE CARRIERS ETC. TO CLEAR SPARE TYRES MHRE9 TOW CAPACITY 1600KG/160KG MHRE14 HITCH EXTENDER REDUCES TOW CAPACITY BY APPROX 1/3

Part No.

Pin Hole Size

MHRE14 MHRE9

5/8” 5/8”

Length between Pin Holes 355.6mm 228.6mm

Total Length 483mm 356mm

HITCH RECEIVER EXTENDER MULTI - FIT • • • • • • • • •

THE BONUS P.E. ANTI-RATTLE DEVICE WILL KEEP THE EXTENDER TIGHT IN THE RECEIVER BLACK POWDER COATED FINISH ROBOTIC WELDED FOR STRENGTH FITS 2” SQUARE RECEIVERS USED FOR BIKE CARRIERS ETC. TO CLEAR SPARE TYRES 180KG DOWNLOAD CAPACITY (DO NOT OVERLOAD) EXTENDS O.E. RECEIVER UP TO 308mm TOTAL LENGTH (END TO END) : 416mm EXTENSION LENGTHS: 308mm, 253mm, 248mm, 193mm

Part No.

Pin Hole Size

MHREMF

5/8”

Max. Down Weight 180kg

Total Length 416mm


UNIVERSAL STEP BUMPER RECEIVER HITCH • • • •

BLACK POWDER COATED FINISH ACCEPTS 2” SQUARE BALL MOUNTS OR OTHER ACCESSORIES TOW CAPACITY 1600kg GTW 600kg TW COMES COMPLETE WITH MOUNTING HARDWARE

Part No. MHSBR

Description UNIVERSAL STEP BUMPER RECEIVER

TOWING HITCH KITS TOWING KIT - DELUXE CONTAINS: BALL MOUNT 2” (51mm) DROP - 3/4” (19mm) RISE. 50MM 3500kg AUSTRALIAN STANDARDS CHROME TOW BALL. 5/8” (16mm) 3500kg LOCKING HITCH PIN. COMES HOUSED IN A HANDY BLOW MOULD CARRY CASE FOR CONVENIENT STORAGE WHEN NOT IN USE. Part No.

Rating (kg) GTW/TW

Ball Hole Size

Max. Drop

Max. Rise

Length

MHSK01

2721/272

7/8”

51mm

19mm

210mm

TOWING STARTER KIT CONTAINS: BALL MOUNT 2” (51mm) DROP - 3/4” (19mm) RISE. 50MM 3500kg AUSTRALIAN STANDARDS CHROME TOW BALL. 5/8” (16mm) 3500kg HITCH PIN AND CLIP COMES HOUSED IN A CARRY CASE FOR CONVENIENT STORAGE WHEN NOT IN USE.

Part No.

Rating (kg) GTW/TW

Ball Hole Size

Max. Drop

Max. Rise

MHSK04

2721/272

7/8”

51mm

19mm

210mm

WINNER OF THE GOLD AWARD FOR BEST NEW PACKAGING AT THE AAAA AUTO EXPO SYDNEY 2013


RECEIVER TUBE (WELD-ON) • • • •

RECEIVES 2” X 2” BALL MOUNT HITCHES UNPAINTED FOR EASE OF WELDING SEAMLESS TUBE FOR BETTER RESISTANCE OF FORCES FROM DIFFERENT DIRECTIONS WHILST TOWING USE WHERE A RECEIVER IS REQUIRED. ATV’S, MACHINERY ECT.

Part No.

Pin Hole Size

Length

Shaft Size

MHRT12

5/8”

305mm

2” I.D. x 305mm

PINTLE RECEIVER ARM 8 HOLE • • • • • • • •

2” SOLID STEEL SHANK ARM HEAVY DUTY 1/2” THICK MOUNTING PLATE BLACK POWDER COATED FINISH FITS 2” SQUARE RECEIVERS 3 X MOUNTING POSITIONS (85mm x 45mm x 13.5mm) REVERSIBLE STRENGTHENING GUSSET WELDED IN ROBOTIC WELDED FORGED STEEL

Part No. MHPRA

Working Capacity 6000kg

Pin Hole Size 5/8”

PINTLE HOOK COMBO 6t • • • • • • • • • •

BLACK POWDER COATED FINISH FITS TO PINTLE MOUNT RECEIVER ARM WITH LOCKING SAFETY CATCH & MOUNTING HARDWARE USED IN AGRICULTURE, MINING, 4X4 AND WHERE SHIFTING HEAVY LOADS IS REQUIRED. EG. PLANT TRAILERS CAN USE AS STANDARD BALL MOUNT OR WITH PINTLE COUPLING TOW BALL CAPACITY = 3500KG TOW RING HITCH TOWING CAPACITY = 6000KG TOW BALL TOWING CAPACITY = 3500KG (TESTED TO ADR62/02) MOUNTING BOLT POSITIONS (85mm x 45mm x 13.5mm) TESTED & CERTIFIED IN AUSTRALIA TO ADR62/02 & AS4177

Part No.

Description

MHPC1 MHPCL

PINTLE HOOK COMBO 6 TONNE WITH BALL 6000kg REPLACEMENT LOCKING PIN

MHPC1

Capacity

MHPCL


PINTLE HOOKS • • • • • •

BLACK POWDER COATED FINISH, ADR COMPLIANT TWO PIECE CONSTRUCTION WITH NO WELDS WITH LOCKING SAFETY CATCH & MOUNTING HARDWARE USE WITH PINTLE MOUNT MOUNTING POSITIONS (85mm x 45mm x 13.5mm) UNIQUE DESIGN ALLOWS EASIER OPENING AND CLOSING

Part No.

Description

MHPH10 MHPH15 MHPH20

PINTLE HOOK 10 TONNE - HEAVY DUTY PINTLE HOOK 15 TONNE - HEAVY DUTY PINTLE HOOK 20 TONNE - HEAVY DUTY

Capacity 10000kg 15000kg 20000kg

PINTLE HOOK RECEIVERS • • • • • •

BLACK POWDER COATED FINISH, ADR COMPLIANT PINTLE HOOK: TWO PIECE CONSTRUCTION WITH NO WELDS WITH LOCKING SAFETY CATCH SUITS 50MM SQUARE RECEIVER UNIQUE DESIGN ALLOWS EASIER OPENING AND CLOSING MHPCR: INCLUDES 50MM X 3.5T TOW BALL

Part No.

Description

MHPCR MHPHR5

PINTLE COMBO RECEIVER 6T- HEAVY DUTY PINTLE HOOK RECEIVER 5T - HEAVY DUTY

MHPCR

Capacity 6000kg 5000kg

MHPHR5

PINTLE TOW BALL ADAPTOR • • • • • •

BLACK POWDER COATED FINISH CAN USE WITH 70mm 4.5t (32mm SHANK) or 50mm 3.5t (22mm SHANK) TOW BALLS, REDUCING BUSH INCLUDED HIGH TENSILE BOLTS AND NUTS INCLUDED USE WITH PINTLE MOUNT ARM OR FITS DIRECTLY TO ANY PINTLE MOUNTING MOUNTING HOLE POSITIONS (85mm x 45mm x 13.5mm) 4500KG RATED

Part No.

Description

MHPTBA

PINTLE TOW BALL ADAPTOR RATED CAPACITY 4.5t

TOW BALL REDUCING BUSH

PINTLE ARM NOT INCLUDED


TOW BAR ASSEMBLIES TOW BAR KIT - VW AMAROK • • • •

MHTB-VW2 : TESTED IN AUSTRALIA TO COMPLY WITH ADR62/02 & AUSTRALIAN STANDARDS AS4177 (TESTED TO 3500KG) RATED TOW BAR CAPACITY: 3500kg RATED TOW BALL DOWNLOAD: 350kg THE KIT INCLUDES: 1 x TOW BAR : 1 x 3650kg 2” DROP BALL MOUNT LUG: 2 x RATED 1.5T D GALVANISED D SHACKLES : 1 x HITCH PIN & CLIP: 1 x INSTRUCTION SHEET : 4 x HIGH TENSILE BOLTS & WASHERS : 1 x TOWBAR I.D. VEHICLE LABEL (TOW BALL & WIRING HARNESS NOT INCLUDED)

Part No.

Description

MHTB-VW2

TOW BAR ASSEMBLY SUITS VW AMAROK WITH O.E. REAR STEP BUMPER MARCH 2011 ONWARDS

RECOVERY RECOVERY HITCH KIT • • • • • •

SGS TESTED AND CERTIFIED (COMPLIES TO AS 2741-2002) FITS 2” X 2” RECEIVER TUBES, FEATURES 2 X 5/8” HITCH PIN HOLES INCLUDES 4.75T 19 X 22MM RATED BOW SHACKLE BOW SHACKLE IS GALVANISED AND PAINTED, 2 PIN HOLES HITCH W.L.L RATING 5000KG - ZINC FINISH TO RESIST CORROSION DUAL HITCH PIN HOLES FOR BOTH VERTICAL OR HORIZONTAL USE

Part No.

Description

MHRH

RECOVERY HITCH WITH RATED BOW SHACKLE

RATED “D” & BOW SHACKLES • • • • •

ALL OUR SHACKLES ARE STAMPED AND RATED AND COMPLY TO AUSTRALIAN STANDARDS AS/NZS 2741-2002 TESTED TO 6 TIMES THE RATED W.L.L. (WORKING LOAD LIMIT) HEAVY DUTY “S” GRADE RATED BOW SHACKLE IS GALVANISED WITH PAINTED PIN D-SHACKLES ARE GALVANISED WITH YELLOW PIN FOR EASE OF IDENTIFICATION.

Part No.

MHRDS08 MHRDS10 MHRDS11 MHRDS13 KBS325 KBS475

Description

RATED D-SHACKLE 8mm x 9mm 0.75 tonne W.L.L. RATED D-SHACKLE 10mm x 11mm 1 tonne W.L.L. RATED D-SHACKLE 11mm x 13mm 1.5 tonne W.L.L. RATED D-SHACKLE 13mm x 16mm 2 tonne W.L.L. RATED BOW SHACKLE 16mm x 19mm 3.25 tonne W.L.L. RATED BOW SHACKLE 19mm x 22mm 4.75 tonne W.L.L.


RECEIVER WINCH CRADLE • • • • • • • • • • • •

BLACK POWDER COATED FINISH FOR WEATHER RESISTANCE EASY INSTALLATION, MOUNTS TO VEHICLES 50MM SQ. RECEIVER WILL SUIT MOST WINCHES ON THE MARKET UP TO 12,000 lbs HANDLES CAN BE ADJUSTED BY 3 PRESET MOUNTING HOLES BOLTS INCLUDE NYLOC NUTS FOLDS DOWN FOR EASE OF STORAGE INCLUDES MOUNTING PLATE FOR YOUR ROLLER FAIRLEAD HEAVY DUTY CONSTRUCTION, 6mm THICK PLATE DIMENSIONS: 600mm x 400mm x 145mm MOUNTING PLATE SIZE = 355mm x 182mm INCLUDES HITCH PIN AND CLIP LOCKING HITCH PINS ARE AVAILABLE AS OPTIONAL EXTRA

Part No.

Description

MHWMC

RECEIVER WINCH MOUNTING CRADLE, FOLDABLE

RECEIVER REDUCER SLEEVE • • • • • •

REDUCES A 2-1/2” SQ. RECEIVER TO 2” SQ. RECEIVER SUITS SOME AMERICAN VEHICLES EG. FORD F-250, F-350, GM SILVERADO G.T.W. & T.W. ARE LIMITED TO THE VEHICLES HITCH CAPACITY USE SAME PIN HOLE AS 2-1/2”RECEIVER TOTAL LENGTH = 146MM - LENGTH CENTRE PIN HOLE TO END = 45MM MADE FROM POWDER COATED HIGH GRADE STEEL

Note: Some OEM hitches have a tighter/different radius on their 2-1/2 inch receiver tubes. To accommodate the OEM 2-1/2 inch hitch, the corners of a ball mount, shank or reducer sleeve may need to be sanded down to slide into the hitch. Do not remove any more material than necessary. Simply removing the paint or powder-coat is often sufficient. Never use a grinder to knock-down the corners, which may remove too much material and will also heat the accessory and could compromise the product's structural integrity. This is especially the case with cast accessories like larger weight distribution shanks

Part No. MHRS-2

Description RECEIVER REDUCING SLEEVE 2-1/2” SQ. TO 2” SQ.


SMART PLUG ‘N’ PLAY ECS WIRING HARNESS THE ECS WIRING HARNESS IS COMPATIBLE WITH: • PDS - PARKING SENSOR CUTOUTS • LED LIGHTING SYSTEMS • TSP/TRAILER STABILITY PROGRAMS • CAN-bus SYSTEMS • POWERED ACCESSORY PICK UP - 12V LIVE WIRE PRE WIRED IN HARNESSES • ELECTRIC BRAKE PICK UP - PRE WIRED IN HARNESSES • TRAILER GLOBE FAILURE SENSOR WARNING • EASY TO INSTALL PLUGS DIRECTLY INTO O.E. CONNECTORS • NO SPECIAL TOOLS OR SOLDERING REQUIRED • INCLUDES 7 PIN FLAT PLUG • COMPLIES WITH AS4177-5 AUSTRALIAN STANDARDS

Part No.

Description

MHWH-VW

SMART WIRING HARNESS SUIT VW AMAROK 2011 ON

OTHER WIRING HARNESS KITS AVAILABLE UPON REQUEST

TOWING ACCESSORIES HITCH GUIDE & LOCK •

• • • •

UNIQUE SELF ALIGNING TRAILER ACCESSORY DESIGNED TO LOCATE YOUR TRAILER COUPLING OVER YOUR TOW BALL ALSO HELPS PREVENT BUMPER DAMAGE THE WINGS CAN BE REMOVED AND RE-FITTED TO BASE TO USE AS A COUPLING LOCK WHILST TRAVELLING OR PARKED. INSTALLS IN MINUTES, WINGS ARE EASY TO REMOVE WHEN NOT IN USE NOTE: NOT SUITABLE FOR 4WD COUPLINGS, EG. TREG, TRIGG, AT35

Part No.

Description

CM001

TRAILER GUIDE & LOCK ASSEMBLY

SECURITY! ‘LOCK-UP’ Wings can be locked in the security position whilst towing or when the vehicle and/or trailer are left unattended as a very successful theft deterrent.


TOWING ACCESSORIES TOW BALLS 50mm 3.5t • • • • •

COMPLIES WITH AUSTRALIAN STANDARDS AS/NZS 4177 AND ADR DOUBLE DIPPED CHROME PLATED SIDE FLATS FOR EASE OF TIGHTENING (NTB60 & NTB60CB) NTB60C & NTB60CB SHANK LENGTH 60mm NTB5045CB SHANK LENGTH 114.3mm

Part No.

Description

NTB60C NTB60CB NTB5045CB

TOW BALL 50MM 3500KG X 60MM (BLISTER CARD) TOW BALL 50MM 3500KG X 60MM (BULK) TOW BALL 50MM 3500KG X 114.3MM (BULK)

TOW BALL 70mm 4.5t • • • • •

COMPLIES WITH AUSTRALIAN STANDARDS AS/NZS 4177 AND ADR DOUBLE DIPPED CHROME PLATED 70MM DIAMETER BALL, SHANK DIA. 32mm, SHANK LENGTH 70mm 4500KG RATED CAPACITY PACKED POLY BAG WITH BARCODE/DESCRIPTION LABEL

Part No.

Description

NTB70CB

TOW BALL 70MM X 4500KG CAPACITY

TOW BALL REDUCING BUSH • • •

REDUCES TOW BALL HOLE FROM 32mm (1-1/4”) to 22mm (7/8”) ZINC PLATED PACKED POLY BAG WITH BARCODE/DESCRIPTION LABEL

Part No.

Description

MHRB

REDUCING BUSH 32MM TO 22MM

TREG PIN / COUPLING LOCK •

• •

SUITS QUICK RELEASE COUPLINGS OR USE ON TREG, TRIGG & AT35 STYLE HITCH PINS CAN ALSO BE USED AS A SPARE WHEEL LOCK RUBBER O-RING SEAL PREVENTS DUST, DIRT, ECT. FROM ENTERING THE LOCK 1/4” (6.3MM) DIAMETER PIN

Part No.

Description

NOCL4

TREG PIN OR COUPLING LOCK

NTB60C

NTB60CB

NTB5045CB

NTB70CB


TOWING ACCESSORIES TOW BAR SHIN PROTECTOR • • • • •

MADE FROM SOFT RUBBER. FITS UNDER THE TOW BALL AND PREVENTS BRUISED SHINS . SIMPLY TO INSTALL AND SUITS ALL SIZED TOW HITCHES “MISTER HITCHES” BRANDED SUPPLIED IN A P.O.S. DISPLAY BOX OF 12PCS

Part No. MHSP

MHSP

Description SHIN PROTECTOR POS BOX 12PCS

TOW BALL COVERS • • • • •

PROTECTS YOUR TOW BALL FROM THE ELEMENTS FITS BOTH 48mm and 50mm TOW BALLS MHTBCBL BLACK TOW BALL COVER WITH MISTER HITCHES LOGO MHTBCC CHROME TOW BALL COVER PLAIN SUPPLIED IN A P.O.S. DISPLAY BOX OF 12PCS

Part No. MHTBCBL MHTBCC

Description TOW BALL COVER 12PCS BLACK WITH M.H. LOGO TOW BALL COVER 12PCS CHROME PLAIN DISPLAY BOX

TOW BAR RECEIVER COVER • • • • •

MHRCL

Description TOW BAR RECEIVER COVER 12PCS BLACK W/ M.H. LOGO

TOW BALL LOCKING SLEEVE

MHTBCC

STOPS DIRT FROM ENTERING YOUR RECEIVER MADE FROM DURABLE RUBBER FITS TO MOST 50MM I.D. SQUARE TOW BAR RECEIVERS COMES WITH M.H. BRANDING EMBOSSED ON THE FACE SUPPLIED IN A P.O.S. DISPLAY BOX OF 12PCS

Part No.

• • •

MHTBCBL

STOPS THE TOW BALL FROM SPINNING ONLY ONE WRENCH REQUIRED WHEN FITTING OR REMOVING THE BALL 2 SIZES AVAILABLE TO SUIT 65mm or 75mm WIDE BALL MOUNT PLATFORMS SUITS NTB60C FLAT SIDED TOW BALLS. (eg. 44mm between flats)

Part No.

Description

MHTBS65 TOW BALL LOCKING SLEEVE SUITS 65mm WIDE HITCHES MHTBS75 TOW BALL LOCKING SLEEVE SUITS 75mm WIDE HITCHES

MHRCL


ANTI-RATTLE HITCH DEVICES

ANTI-RATTLE HITCH PIN LOCK • • • •

FITS ALL TOW BAR RECEIVERS & HOLLOW SHANKED BALL MOUNTS WITH 5/8” PIN HOLE CHROME PLATED WITH ZINC ALLOY LOCK HEAD EASY TO INSTALL - SUITS HOLLOW SHANKS ONLY COMPLETE WITH 2 KEYS AND WRENCH

Part No.

Description

MHARHP

ANTI-RATTLE HITCH PIN LOCK 5/8” (BLISTER CARD)

ANTI-RATTLE HITCH BRACKET • • • •

FITS MOST TOW BAR RECEIVERS & BALL MOUNTS WITH 5/8” PIN HOLE SUITABLE FOR SOLID OR HOLLOW SHANKS OF BALL MOUNT TONGUES OR OTHER RECEIVER MOUNTED ACCESSORIES POWDER COATED PLATE, INCLUDES NYLOC LOCKING NUTS EASY TO INSTALL

Part No. MHARHB

Description ANTI-RATTLE HITCH BRACKET (BLISTER CARD)

ANTI-RATTLE HITCH BOLT • • • • •

FITS MOST TOW BAR RECEIVERS & HOLLOW SHANKED BALL MOUNTS WITH 5/8” PIN HOLE ZINC PLATED FOR CORROSION RESISTANCE EASY TO INSTALL - SUITS HOLLOW SHANKS ONLY INCLUDES SPACER SLEEVE AND RETAINING CLIP REPLACES THE STANDARD HITCH PIN OR OTHER LOCK TYPES

Part No. MHARBL

Description ANTI-RATTLE HITCH BOLT & CLIP (BLISTER CARD)


TOWING SECURITY HITCH PIN & CLIPS • • •

IN POLY BAG WITH HEADER CARD - INCLUDES 4MM “R” CLIP 5/8” (16MM) PIN DIAMETER - SUITS 2” OR 2-1/2” RECEIVERS 4MM HITCH PIN “R “CLIP SOLD SEPERATLEY

Part No.

Description

NHP3 NHP8 NRC4Z-1

HITCH PIN WITH CLIP 65MM X 5/8” POLY BAG HITCH PIN WITH CLIP 65MM TO 80MM X 5/8” POLY BAG HITCH PIN “R” CLIP SOLD EACH IN BULK

HITCH PIN LOCKS • • • • • •

5/8” (16MM) DIAMETER CHROME PLATED PIN TOW RATING 3500KG NHPL1: HEAVY DUTY LOCK WITH 2 KEYS & LOCK DUST COVER NHPL2: SMOOTH ACTION LOCK WITH 2 KEYS & LOCK DUST COVER NHPL4: DUAL PURPOSE LOCK WITH R CLIP, 65-80MM USE WITH 2” X 2” CLASS 4 RECEIVERS EG. HAYMAN REESE

Part No.

Description

NHPL1 NHPL2 NHPL4

HITCH PIN LOCK - L STYLE (BLISTER) HITCH PIN LOCK - STRAIGHT STYLE (BLISTER) HITCH PIN LOCK - DUAL PURPOSE W/ R CLIP (BLISTER)

COUPLING LOCK - 2 STAGE • • • •

ZINC PLATED FINISH COMPLETE WITH PADLOCK & 3 KEYS 2 STAGE - LOCKS THE TRAILER TO THE VEHICLE WHEN CONNECTED OR LOCKS COUPLING WHEN TRAILER DISCONNECTED STRONG 6MM WELDED STEEL CONSTRUCTION

Part No.

Description

NCL10

COUPLING LOCK 2 STAGE WITH PADLOCK

COUPLING LOCK - HIGH VIS • • • •

NHP3

SUITS ALL BALL COUPLING SIZES HIGH VIS COLOUR - THEFT DETERRENT RATCHET LOCKING MECHANISM EASY TO FIT AND REMOVE - 2 KEYS INCLUDED

Part No.

Description

NCL20

UNIVERSAL TRAILER COUPLER LOCK

NHP8 NRC4Z


TOWSAFE BALL WEIGHT SCALES THE ORIGINAL AND STILL THE NUMBER ONE SELLING BALL WEIGHT SCALES IN AUSTRALIA. THE TOWSAFE BALL WEIGHT SCALE EASILY MEASURES THE TOW BALL WEIGHT OF YOUR CARAVAN OR TRAILER. STAY SAFE AND LEGAL WHILST TOWING BY ENSURING YOUR BALL WEIGHT IS WITHIN ITS’ SPECIFIED LIMITS. TOO LITTLE OR TOO MUCH WEIGHT ON YOUR TOW BALL CAN HAVE SOME DANGEROUS IMPLICATIONS INCLUDING EXCESSIVE SWAY, POOR HANDLING OR DIFFICULTY IN BRAKING. EXCEEDING YOUR VEHICLES BALL WEIGHT IS BOTH UNSAFE AND ILLEGAL. DON’T RISK THE SAFETY OF YOURSELF OR OTHERS, CHECK YOUR TOW BALL WEIGHT BEFORE YOU HIT THE ROAD.

DON’T LET THIS HAPPEN TO YOU

FEATURES:

• SCALE CALIBRATION: 100kg to 350kg • ACCURACY TESTED TO AUSTRALIAN N.Z. AND INTERNATIONAL STANDARDS AS/NZS ISO 10012:2004

• TESTED AND CERTIFIED BY SGS • EVERY BATCH TESTED AND SERIAL NUMBERED TO ENSURE QUALITY AND ACCURACY.

• EASY TO READ LASER ETCHED GAUGE. • METAL CONSTRUCTION & POWDER COATED FOR LONG LIFE. • SPECIAL JAPANESE MADE COMPRESSION SPRING ENSURES ACCURACY IS MAINTAINED AFTER 1000 OF USES.

• SOFT HEAD WILL NOT DAMAGE THE COUPLING. • TAIWAN QUALITY MADE WITH A 12MTH WARRANTY. • AN OPTIONAL ADAPTOR PLATE HAS BEEN DEVELOPED TO BE

MHBWS

USED IN CONJUNCTION WITH THE TOWSAFE BALL WEIGHT SCALES FOR CARAVANS AND TRAILER THAT DO NOT HAVE A CONVENTIONAL BALL COUPLING FITTED. Eg. TREG, TRIGG, McHITCH ETC

MHBWS-BAG STORAGE BAG

MHBWS-ADP ADAPTOR


TOWSAFE CARAVAN & TRAILER WEIGHT CONTROL SCALES KNOW YOUR TOWING WEIGHTS FOR SAFER & LEGAL TOWING. STAY SAFE AND LEGAL BY ENSURING YOUR TOWING WEIGHT CAPACITIES ARE NOT EXCEEDED. FAILURE TO ADHERE TO YOUR MAXIMUM TOWING CAPACITIES MAY RESULT IN A FINE. OR IN THE CASE OF AN ACCIDENT REFUSAL OF THE INSURANCE CLAIM, THE POSSIBILITY OF FURTHER LEGAL ACTION & YOU ALSO RISK THE SAFETY OF YOUR PASSENGERS AND OTHERS ON THE ROAD. APPLICATIONS: • CARAVAN, TRAILER. MOTORHOME & VEHICLE • PORTABLE WEIGHING eg. T.W. (Ball Weight), A.T.M., G.T.M., G.V.M., G.C.V.M. etc. • LOAD DISTRIBUTION SET UP • WEIGHT ENFORCEMENT • SUSPENSION SET UP IN MOTOR RACING SPORT • SPECIAL WEIGHING CONFIGURATIONS

PART No. MHCWS

FEATURES: • LIGHT WEIGHT ALUMINIUM & STAINLESS STEEL CONSTRUCTION FOR STRENGTH & CORROSION RESISTANCE. • HIGH CAPACITY, MAX 1500kg PER WHEEL, WEIGHS SINGLE AXLE VANS UP TO 3000kg CAP. & TWIN AXLE VANS UP T0 6000kg CAP. (1kg INCREMENTS) • ULTRA LOW PROFILE WEIGHING PLATFORM REDUCES THE NEED FOR LEVELLING PADS. (Height: 18mm) • LARGE LCD DIGITAL INDICATOR WITH BACKLIGHT FOR EASE OF VIEWING. Lb/kg SELECTABLE. • WEIGHING PLATFORM SIZE: 305mm x 305mm x 18mm • IP66 RATED INGRESS PROTECTION • POWERED BY 2 x 3V CR 2032 BUTTON CELL BATTERIES (included) • 5 INTERNAL LOAD CELLS FOR PRECISION. • PRECISION = 0.2% FULL SCALE • ACCURACY TESTED & COMPLIANT TO AUSTRALIAN &

DON’T LET THIS HAPPEN TO YOU

PART No. MHCWS BARCODE: 0000006793616 CARTON: 4pcs PER OUTER N.W.: 22.8kg G.W.: 23.8kg (OUTER CARTON) MEAS: 48cm X 36.5cm X 38cm

THIS IS ANOTHER QUALITY MISTER HITCHES PRODUCT. FOR MORE GREAT PRODUCTS SEE

WWW.MISTERHITCHES.COM.AU


TRAVEL SAFETY CARAVAN/TRAILER SWAY CONTROL DEVICE •

• • • • • •

THIS DEVICE CONTROLS THE SWAY OR SNAKING OF YOUR CARAVAN OR TRAILER .THIS CAN OCCUR WHEN DRIVING IN WINDY CONDITIONS, PASSING TRUCKS, ROAD TRAINS OR POOR WEIGHT DISTRIBUTION OF YOUR LOAD BEING TOWED. (NOT FOR USE WITH OVERRIDE BRAKES) EASY TO FIT, REMOVE AND USE, INSTRUCTIONS INCLUDED CAN BE FITTED TO DRIVERS OR PASSENGERS SIDE OF DRAWBAR USES DOUBLE FRICTION DISC BRAKE PRINCIPLE ADJUSTABLE FRICTION CONTROL OPTIONAL NON - WELD HITCH BALL BRACKETS AVAILABLE TO SUIT EITHER 65 OR 75MM WIDE BALL PLATFORMS CAN BE USED WITH MOST WEIGHT DISTRIBUTION HITCHES

Part No.

Description

MHFSC FRICTION SWAY CONTROL DEVICE MHSCB65 NON-WELD SWAY CONTROL BALL BRACKET SUITS 65MM HITCHES MHSCB75 NON-WELD SWAY CONTROL BALL BRACKET SUITS 75MM HITCHES

OPTIONAL NON - WELD SWAY CONTROL BRACKETS SWAY CONTROL BALL HOLE

SUITS EITHER 65MM OR 75MM WIDE BALL PLATFORMS VEHICLE TOW HITCH

TRAILER DRAWBAR

FRICTION SWAY CONTROL

TOW BALL HOLE

WEIGHT DISTRIBUTION SYSTEMS Mister Hitches Weight Distribution Hitches evenly distribute weight over the entire length of the towing vehicle and trailer, resulting in a more level ride with more control and stability. Weight distribution hitches also deliver better braking, less strain on the towing vehicle and increased towing capacity. Distributes weight to all axles. Provides positive towing control. Add even more control against sway with Mister Hitches Sway Control Device. The sway control simply attaches to your weight distribution hitch to minimize sway caused from high winds, curving roads or quick manoeuvres. (The Sway Control is not suitable with override brakes)


Mister Hitches Weight Distribution Systems are designed to evenly distribute weight over all axles, levelling the ride of the towing vehicle and trailer for increased stability, control and economy. They help reduce trailer sway and excessive tyre wear by returning the natural balance of the towing vehicle. In addition, they restore the towing vehicles braking efficiency, headlight alignment and suspension geometry for a smooth and enjoyable towing experience.

TOW SAFELY & ENJOY THE RIDE SPRING BAR BRACKET SUIT UP TO 3” WIDE A FRAMES

Mister Hitches Friction Sway Control Device controls the sway or snaking of your towed vehicle. This can occur when driving in windy conditions, passing road trains or poor weight distribution of your towing load. This unit is easy to install & remove and can be fitted to either the RH or LH side of the A frame. Uses double friction disc brake principle and is easy to adjust or simply turn off. An optional non-weld ball bracket is available. This unit is compatible with most Weight Distribution Kits.

ADJUSTABLE ANGLE HEAD WITH DUAL SWAY CONTROL BALL HOLES HEAVY DUTY 30” SPRING BARS

MISTER HITCHES FRICTION SWAY CONTROL DEVICE

ADJUSTABLE & REVERSIBLE 2” SOLID SHANK HITCH

• SPARE PARTS AVAILABLE. • LONGER SHANKS AVAILABLE TO SUIT SOME VEHICLES. Part No.

Description

MHWDR6 MHWDR8 MHFSC

WEIGHT DISTRIBUTION SYSTEM 600SERIES 135KG TO 275KG BALL WEIGHTS WEIGHT DISTRIBUTION SYSTEM 800SERIES 227KG TO 365KG BALL WEIGHTS FRICTION SWAY CONTROL DEVICE

COMPLIES WITH REGULATION V-5, C.S.A. STANDARD D-264


MHWDR6

WEIGHT DISTRIBUTION SYSTEM COMPONENTS

MHWDR8

ADJUSTABLE ANGLE HEAD


REVERSIBLE STANDARD SHANK DIMENSIONS

MHWDS10 STANDARD SHANK

MHWDS08 SHORT SHANK

PLEASE NOTE: THIS SHANK COMES STANDARD WITH THE WDH KIT

MHWDS1011 LONG SHANK

MHWDS1014 EX LONG SHANK

PLEASE NOTE: SOME SLIGHT MODIFICATION TO THE WDH SHANK MAY BE REQUIRED WHEN INSERTING INTO SOME O.E.M. TOWBAR RECEIVERS. THIS MODIFICATION INVOLVES SLIGHTLY FILING THE CORNERS OF THE SHANK DOWN SO THAT IT FITS INSIDE THE RECIVER.

Part No.

Description

(ALL SHANKS EXCEPT MHWDS10 ARE OPTIONAL AT EXTRA COST)

MHWDS08 MHWDS10 MHWDS1011 MHWDS1014

WEIGHT DISTRIBUTION SHANK , SHORT SHANK WITH 2 PIN HOLES (SUITS SOME FORD RANGER TOWBARS) WEIGHT DISTRIBUTION SHANK (225MM COMES STANDARD IN WDH KIT) WEIGHT DISTRIBUTION LONG SHANK 285MM, OPTIONAL WEIGHT DISTRIBUTION EX LONG SHANK 355MM, OPTIONAL

WEIGHT DISTRIBUTION HEAD ADAPTER PLATE. Part No. MHWDAP

MHWDAP ADAPTER PLATE

WDH HEAD

TREG COUPLING McHITCH AUTO COUPLING


BIKE CARRIERS MHBC2 BIKE CARRIER • • • • • • •

FOLDS AWAY FLAT - EASY TO STORE IN THE BOOT OR SHED. FITS ONTO 50MM TOW BALLS. SUITABLE FOR 2 BIKES, MAX CARRYING CAPACITY 30Kg RUBBER COATED FRAME HOLDERS KEEP THE BIKES FREE FROM SCATCHES & HOLDS THE BIKES SECURELY. RUBBER FRAME HOLDER STRAPS ARE ADJUSTABLE TO SUIT MOST BIKE FRAME SIZES. INCLUDES CAM BUCKLE STRAP TO SECURE BIKES. INCLUDES BUTTON RELEASE FUNCTION ON CENTRE BAR.

Part No.

Description

MHBC2

BIKE CARRIER SUITS 50MM TOW BALL

MHBC4F BIKE CARRIER • • • • • • • • • • •

TILTABLE - FOLDABLE - TOWABLE FOLDS AWAY FLAT - EASY TO STORE IN THE BOOT OR SHED. FOLD DOWN ARMS WHEN NOT IN USE. FOLD DOWN FEATURE ALLOWS ACCESS TO REAR OF VEHICLE. FITS INTO 50mm SQUARE RECEIVERS. SUITABLE FOR 4 BIKES. LOCKABLE (lock not included) POWDER COATED RUBBER FRAME HOLDERS KEEP THE BIKES FREE FROM SCATCHES & HOLDS THE BIKES SECURELY. RUBBER FRAME HOLDER STRAPS ARE ADJUSTABLE TO SUIT MOST BIKE FRAMES AND ALLOWS QUICK LOADING & REMOVAL. CAN BE USED WHILST TOWING A CAMPER OR TRAILER. MAX GTW TOWING CAPACITY 1600kg. (tow ball not included)

Part No.

Description

MHBC4F

BIKE CARRIER SUITS 50MM RECEIVERS


TM001 RATCHET STYLE TOWING MIRROR (1PC)

• • • • •

• • TMK001 WIDE HOOK &


HOLDEN AND FORD STANDARD AND MARINE BEARING KITS

HIGH GRADE BEARING KITS BEARING KITS - HOLDEN (LM)

• • • • •

QUALITY BEARINGS AND OIL SEALS LM BEARINGS SUIT 39MM ROUND & 40MM SQUARE AXLES OUTER BEARING: LM11949 BEARING & LM11910 CUP INNER BEARING: LM67048 BEARING & LM67010 CUP MARINE SEAL INCLUDE S STAINLESS STEEL SEAL HOUSING

Part No.

Description

NBK500S BEARING KIT HOLDEN STANDARD SEAL

BEARING KITS - FORD (SLIMLINE)

• • • • •

QUALITY BEARINGS AND OIL SEALS SLIMLINE BEARINGS SUIT 45MM SQUARE AXLES OUTER BEARING: LM12749 BEARING & LM12710 CUP INNER BEARING: L68149 BEARING & L68110 CUP MARINE SEAL INCLUDES STAINLESS STEEL SEAL HOUSING

Part No.

Description

NBK501S BEARING KIT FORD STANDARD SEAL

LOOSE BEARINGS & SEALS

BEARING PROTECTORS

BEARINGS & SEALS (LOOSE)

• • •

QUALITY BEARINGS AND OIL SEALS SLIMLINE BEARINGS SUIT 45MM SQUARE AXLES LM BEARINGS SUIT 39MM ROUND & 40MM SQUARE AX-

Part No. NTB119 NTB670 NTB127 NTB681 NBSH-S NBSH-M NBSF-S NBSF-M

LOOSE BEARINGS & SEALS TO SUIT HOLDEN AND FORD

Description

BEARING LM11949/10 HOLDEN OUTER BEARING LM67048/10 HOLDEN INNER BEARING LM12749/10 FORD OUTER BEARING L68149/10 FORD INNER BEARING SEAL LM HOLDEN STANDARD BEARING SEAL LM HOLDEN MARINE BEARING SEAL SLIMLINE FORD STANDARD BEARING SEAL SLIMLINE FORD MARINE

ASSOCIATED PRODUCTS NAXNK2 AXLE NUT WASHER & SPLIT PIN KIT 2PC NBB2 BEARING PROTECTORS PAIR NBB2C BEARING PROTECTOR COVERS PAIR NHDC2 HUB DUST COVERS ZINC PAIR NHDC1 HUB DUST COVERS ZINC LOOSE NWNS12.5 5PC HUB STUDS 1/2” SUIT FORD HUBS NWNS716.5 5PC HUB STUDS 7/16” SUIT GM HUBS

NAXNK2

NBB2

NBB2C

NHDC2

NHDC1


National Trailer Parts TRAILER HAND WINCH With Strap & Hook We now have a range of quality built hand winches to suit most applications. The winches range in capacity from 455kg up to 910kg and include the standard hand winch which is single drive, a dual drive unit which is built for heavy duty use and a two speed winch allowing an option to select your wind up speed. All winches are protected by the elements by using our exclusive corrosion protection processes. PLEASE NOTE: These winches are not suitable for lifting.

NHW455

NHW635

Features:

• • • • •

ALL WINCHES INCLUDE A WEBBING STRAP WITH SAFETY HOOK SUPERIOR CORROSION PROTECTION USING ELECTROCOAT OR SEAGUARD TECHNOLOGY ALL WINCHES ARE FITTED WITH OUR EXCLUSIVE POWER-GRIP HANDLE MAKING THE WINCH EASIER AND MORE COMFORTABLE TO OPERATE. ALL WINCHES INCLUDE UNIVERSAL MOUNTING HOLE CONFIGURATION. ALL GEARS USED IN OUR WINCHES ARE MADE OF ONE PIECE FOR ADDED STRENGTH AND DURABILITY.

NHW725D NHW910D

NHWS506 NHW455

WINCH WITH STRAP 455kg, 4.1:1 GEAR RATIO, 50mm x 7mtr

NHW635

WINCH WITH STRAP 635kg, 4:1 GEAR RATIO, 50mm x 7mtr WINCH WITH STRAP 725kg, DUAL DRIVE 4.1:1 GEAR RATIO, 50mm NHW725DD x 6mtr WINCH WITH STRAP 910kg, DUAL DRIVE 4.1:1 GEAR RATIO, 50mm NHW910DD x 7.6mtr WINCH WITH STRAP 910kg, 2 SPEED, 4:1/8:1 GEAR RATIO, 50mm x NHW9102S 10mtr NHWH

HAND WINCH HANDLE W/HARDWARE

NHWS506

HAND WINCH REPLACEMENT STRAP

NHWH NHW9102


TRAILER COUPLINGS COUPLING (SNAP-ON) • • • • •

NEW 4 HOLE MULTI-FIT SUITS 2 HOLE AND 3 HOLE BOLT PATTERNS, SUITS 50MM TOW BALLS COMPLIES WITH AUSTRALIAN STANDARDS BALL ADJUSTING SCREW & PADLOCK FACILITY 2000KG CAPACITY, ZINC PLATED FINISH

Part No.

NTC4Z

Description

COUPLING MULTI-FIT 4 HOLE, SUITS 2 HOLE AND 3 HOLE

OVERRIDE BRAKE COUPLING • • • • •

ZINC PLATED FINISH, SG GRADE IRON SUITS 50MM TOW BALLS COMPLIES WITH AUSTRALIAN STANDARDS BALL ADJUSTING SCREW & PADLOCK FACILITY 2000KG CAPACITY, STRONG SPRING

Part No.

Description

NORC1Z

OVERRIDE BRAKE COUPLING 4 HOLE MOUNT ZINC

HYDRAULIC OVERRIDE COUPLING • • • •

ZINC PLATED FINISH, SG GRADE IRON SUITS 50MM TOW BALLS, AUSTRALIAN STANDARDS COMPLIANT COMPLETE WITH 3/4” MASTER CYLINDER AND BRACKET 2000KG CAPACITY, STRONG SPRING

Part No.

Description

NORC34MC

OVERRIDE COUPLING WITH 3/4” M/CYL AND BRACKET

POLY BLOCK COUPLINGS • • • • • • • •

DESIGNED FOR OFF-ROAD USE, ZINC PLATED FINISH COMPLIES WITH AUSTRALIAN STANDARDS AS4177.3 2000KG CAPACITY 360° OF ROTATION, 70° OF VERTICAL OSCILLATION RUBBER BLOCK GIVES REDUCED NOISE AND VIBRATION CAN BE USED WITH MECHANICAL & HYDRAULIC BRAKING SYSTEMS NPBC6: WELD ON STYLE NPBORC: BRAKE OVERRIDE SUITS MECHANICAL OR HYDRAULIC BRAKE SYSTEMS

Part No. NPBC6 NPBORC

Description POLY BLOCK COUPLING, WELD ON STYLE POLY BLOCK OVERRIDE COUPLING, 4 HOLE


POLY BLOCK VEHICLE BRACKET • • • •

ZINC FINISH FOR CORROSION RESISTANCE SUITS 7/8” TOW BALL MOUNT HOLE, 3000KG CAP. 3/4” (19MM) T-BAR LOCKING PIN & LYNCH PIN CLIP REPLACES TOW BALL ON VEHICLE FOR USE WITH ALL TYPES OF POLY BLOCK COUPLINGS, EG. TREG, TRIGG, NTP

Part No.

NUBPC7 NPBCAP NPBCALP NOCL4

NUBPC7

NPBCAP

Description NPBCALP

POLY BLOCK COUPLING BRACKET - CAR SIDE REPLACEMENT T-BAR PIN & CLIP REPLACEMENT LYNCH PIN LOCK TO SUIT T-BAR PIN NOCL4

POLY BLOCK CAST BRACKET • • • • •

ZINC FINISH FOR CORROSION RESISTANCE SUITS 7/8” TOW BALL MOUNT HOLE, 3000KG CAP. 3/4” (19MM) T-BAR LOCKING PIN & LYNCH PIN CLIP REPLACES TOW BALL ON VEHICLE FOR USE WITH ALL TYPES OF POLY BLOCK COUPLINGS, EG. TREG, TRIGG, NTP 7/8” BOLT & NUT NOT INCLUDED

Part No.

Description

NPBCAB

POLY BLOCK CAST BRACKET CAR SIDE

HYDRAULIC BRAKE PARTS • • • •

MASTER CYLINDER AND BRACKET AVAILABLE SEPARATELY. NBMC34: 3/4” HYDRAULIC MASTER CYLINDER NMCBL: MASTER CYLINDER MOUNTING BRACKET ZINC PLATED FOR CORROSION RESISTANCE

Part No.

Description

NBMC34 NMCBL

BRAKE MASTER CYLINDER 3/4” BRACKET SUITS MASTER CYLINDER 3/4” & 7/8”

NBMC34

NBMC34

NMCBL

POLY BLOCK COUPLINGS ARE DESIGNED MAINLY FOR OFF-ROAD USE ON CAMPER TRAILERS & STORAGE TRAILERS ETC. THESE COUPLINGS GIVE GREATER FREEDOM OF MOVEMENT FOR ROUGH TERRAIN DRIVING. OPERATES QUIETER THAN STANDARD COUPLINGS. HAND BRAKE LEVERS CAN BE FITTED TO BOTH COUPLINGS. BRAKE OVERRIDE COUPLING CAN BE USED WITH MECHANICAL, HYDRAULIC AND EVEN ELECTRIC BRAKING SYSTEMS.


THE MISTER HITCHES RANGE OF TOWING HITCHES ARE MADE TO MISTER HITCHES STRICT QUALITY STANDARDS IN OUR TAIWAN FACTORY AND ARE DISTRIBUTED EXCLUSIVELY IN AUSTRALIA AND NEW ZEALAND BY INTERTRADE HOLDINGS PTY LTD. ALL PRODUCTS MEET THE APPROPRIATE ADR REGULATIONS AND AUSTRALIAN STANDARDS WHERE APPLICABLE. INTERTRADE HOLDINGS PTY LTD IS A WHOLLY AUSTRALIAN OWNED AND MANAGED COMPANY AND WE PRIDE OURSELVES ON LISTENING TO OUR CUSTOMERS AND AS A RESULT DEVELOPING INNOVATIVE AND UNIQUE TOWING PRODUCT SOLUTIONS.

INTERTRADE HOLDINGS PTY LTD UNIT 1, 2 TIDAL WAY BIBRA LAKE 6163 WA TEL: 08 9418 7044 FAX: 08 9418 7983 info@intertradeholdings.com.au www.intertradeholdings.com.au

Profile for MISTER HITCHES

Mister Hitches catalogue 2017  

MISTER HITCHES PRODUCT CATALOGUE 2017

Mister Hitches catalogue 2017  

MISTER HITCHES PRODUCT CATALOGUE 2017

Advertisement