Page 1

Thermo Scientific

AquaSensors 2012 Price Book = pH = ORP = Contacting Conductivity = Toroidal Conductivity = Dissolved Oxygen = Dissolved Ozone = Free Chlorine = Turbidity = Suspended Solids

Pricing effective January 1st–December 31st, 2012


Product Pricing Guide 2012

ROSS and the COIL trade dress are trademarks of Thermo Fisher Scientific, Inc. and its subsidiaries. AQUAfast, AQUASensors, BOD AutoEZ, ionplus, KNIpHE, LogR, No Cal, ORION, perpHect, PerpHecT, pHISA, pHuture, Pure Water, ROSS, ROSS Ultra, Sage, Sure-Flow, Titrator PLUS, and TURBO2 are registered trademarks of Thermo Fisher Scientific, Inc. and its subsidiaries. A+, All in One, Aplus, AUTO-BAR, AUTO-CAL, Auto-ID, AUTO-READ, AUTO-STIR, Auto-Test, AutoTration, CISA, digital LogR, DuraProbe, EZ Startup, ISEasy, Low Maintenance Triode, Minimum Stir Requirement, MSR, NISS, Optimum Results, Orion Dual Star, Orion Star, SAOB, SMART AVERAGING, SMART STABILITY, Star LogR, Star Navigator 21, Stat Face, Triode are trademarks of Thermo Fisher Scientific, Inc. and its subsidiaries. Guaranteed Success and The Technical Edge are service marks of Thermo Fisher Scientific, Inc. and its subsidiaries. Š 2012 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific, Inc. and its subsidiaries. The specifications, descriptions, drawings, ordering information and part numbers within this document are subject to change without notice. This publication supersedes all previous publications on this subject.

B

Thermo Scientific AquaSensors


Thermo Scientific AquaSensors

Table of Contents Table of Contents...................................................................................................................................... i Thermo Scientific DataStick™ System Components............................................................................ 1 DataStick™ Sensor Body............................................................................................................................ 1 DataStick™ Analytical System.................................................................................................................... 1 DataStick™ Communications Adapter........................................................................................................ 2 Profibus to DataStick™ Adapter.................................................................................................................. 4 AV38 Display Interface for DataStick Sensors........................................................................................... 5 Thermo Scientific AnalogPlus™ System Components......................................................................... 6 AV88 Universal Analyzer for use with AnalogPlus Sensors....................................................................... 6 Alpha 2000 Series for use with AquaSensors AnalogPlus Sensors........................................................... 7 Model 2000D AnalogPlus pH/ORP Analyzer............................................................................................. 7

Note: Replaces former AquaSensors P99 Model

Model 2000W AnalogPlus Contacting Conductivity Analyzer................................................................... 7

Note: Replaces former AquaSensors C99 Model

Thermo Scientific pH Measurement...................................................................................................... 8 DataStick Differential pH Sensor Head...................................................................................................... 8 AnalogPlus Differential pH Sensor – 1.0 Inch Body...................................................................................10 AnalogPlus Differential pH Sensor – 1.5 Inch Body...................................................................................12

pH Calibration and Storage Solutions and other Accessories................................................................................................ 14

Some pH Sensor Images....................................................................................................................................................... 14

Thermo Scientific ORP Measurement................................................................................................. 15 DataStick Differential ORP Sensor Head..................................................................................................15 AnalogPlus Differential ORP Sensor – 1.0 Inch Body................................................................................17 AnalogPlus Differential ORP Sensor – 1.5 Inch Body................................................................................19

ORP Calibration and Storage Solutions and other Accessories............................................................................................. 21

Thermo Scientific Contacting Conductivity/Resistivity Measurement........................................... 22 DataStick™ Contacting Conductivity Sensor Head................................................................................... 22 AnalogPlus Contacting Conductivity Sensor – 1.0 Inch Body.................................................................. 24 AnalogPlus Contacting Conductivity Sensor – Compression Fitting Style............................................... 26 AnalogPlus Contacting Conductivity Sensor – Boiler and Sanitary Styles............................................... 27

Conductivity Calibration Solutions......................................................................................................................................... 28

2012 Product Pricing Guide

i


Product Pricing Guide 2012

Thermo Scientific Toroidal Conductivity Measurement..................................................................... 29 DataStick™ Toroidal Conductivity Sensor Head........................................................................................ 29 AnalogPlus Toroidal Conductivity Sensor................................................................................................. 30

Conductivity Calibration Solutions......................................................................................................................................... 31

Thermo Scientific Dissolved Oxygen Measurement.......................................................................... 32 RDO Pro Optical Dissolved Oxygen System........................................................................................... 32

RDO Pro Sensor Accessories................................................................................................................................................ 33

DataStick Dissolved Oxygen Sensor Head (ppm).................................................................................... 34 AnalogPlus Dissolved Oxygen Sensor Head (ppm)................................................................................. 36 AquaTrace™ ppb Dissolved Oxygen Measurement System..................................................................... 38

Recommended AquaTrace™ Systems.................................................................................................................................... 38

Dissolved Oxygen Electrolyte and Accessories..................................................................................................................... 39

Thermo Scientific Dissolved Ozone Measurement............................................................................ 40 DataStick Dissolved Ozone Sensor Head................................................................................................ 40 AquaZone™ Dissolved Ozone Measurement System.............................................................................. 41

Recommended AquaZone™ Systems.................................................................................................................................... 41

AnalogPlus™ Ozone Sensor..................................................................................................................... 42

Ozone Electrolyte and Accessories....................................................................................................................................... 43

Thermo Scientific Chlorine Measurement........................................................................................... 44 AquaChlor™ Free Chlorine Measurement System................................................................................... 44

Recommended AquaChlor Systems...................................................................................................................................... 44

AquaChlor™ Free Chlorine Accessories.................................................................................................................................. 45

Thermo Scientific Turbidity and Suspended Solids Measurement................................................... 46 AquaClear™ Low Range Turbidity Measurement System with Local Display........................................... 46 AquaClear Low Range Turbidity Measurement System – No Local Display............................................ 46

Turbidity Accessories............................................................................................................................................................. 47

Wide Range DataStick Turbidity System.................................................................................................. 48 Suspended Solids DataStick Measurement System............................................................................... 50 Thermo Scientific Terms and Conditions............................................................................................. 52

ii

Thermo Scientific AquaSensors


Thermo Scientific AquaSensors

Thermo Scientific DataStick™ System Components DataStick™ Sensor Body Model Number DS D  ataStick Sensor Body integrates all sensor and communications functions. Convertible 1” NPT mounting standard. Sanitary and insertion mounting options available.

Body Material 1 316 Stainless Steel (Abrasion Resistant, Robust) 2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, High Temperature)

Mounting Options 1 2 3 4 5

DS

1-inch NPT threads, front and back (Standard) Flow Chamber snap-ring attachment 1.5-inch Ball Valve Insertion Mount (No front threads) 2.0-inch Tri-Clamp (Sanitary style) 2.5-inch Tri-Clamp (Sanitary style)

-WA

Base Price $690.00

Price Adder $95.00 ----$125.00 Price Adder ----$35.00 $75.00 $95.00 $125.00

DataStick Sensor Body Part Number

Note: As shown in the picture below, any sensor head plugs into the front end of the DataStick Sensor Body. Any communications adapter plugs into the back end of the DataStick Sensor Body to form a complete measurement system that can be mounted in process and be wired directly to a PLC or PC network. Measurement, calibration, configuration and diagnostics can be performed from a computer or from an intermediate AV38 display module.

2012 Product Pricing Guide

1


Product Pricing Guide 2012

™ DataStick Communications Adapter

Model Number CA D  ataStick Communications Adapter plugs into any DataStick Sensor Body for direct connection to PLC or computer for full-featured measurement, calibration, configuration and diagnostics. It removes the need for an intermediate analyzer electronics box.

Body Material

Price Adder $50.00 ----$60.00

1 316 Stainless Steel (Abrasion Resistant, Robust) 2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, Chemically Resistant)

Communications 2B 1A 2A 4B 5R 7R 8R

Base Price $205.00

Modbus® RTU over RS-485, for AV38, PLC and Modbus networks. Required for Profibus. ASCII over RS-232, for PC communication. AquaComm software included. Modbus® RTU over RS-232, for direct PC and PLC applications. CANopen for PC and PLC networks. DeviceNet for PLC networks. EtherNet/IP, Modbus/TCP and direct PC and PLC applications. USB connection for PC and portable applications. AquaComm software included. (10 ft cable only)

Cable Length

Price Adder ----$30.00 $30.00 $140.00 $105.00 $295.00 $30.00 Price Adder ----$20.00 $40.00

1 10 Feet 2 20 Feet 3 30 Feet

Reserved Category

CA

A

-----

DataStick Communications Adapter Part Number

General Guide for Communications Adapter Cable Length Protocol

Max Cable Length

Notes

USB

16.4 ft (5 meters)

Supplied with Series ‘A’ Plug for direct connection to PC. Use with AquaComm software.

ASCII over RS-232

50 ft (15 meters)

RS-232 power injector recommended (PN: JBOX232). Use with AquaComm software.

DeviceNet

See Table 1

Use Device Tap hardware for trunk connection.

Modbus RTU RS-485

See Table 2

Use Device Tap hardware for trunk connection.

Modbus RTU RS-232

50 ft (15 meters)

RS-232 power injector recommended (PN: JBOX232).

CANopen

See Table 3

Use Device Tap hardware for trunk connection.

EtherNet/IP

328 ft (100 meters)

Use Ethernet Hub or Switch to extend cable distance.

Note: For longer cable lengths or communcations requirements, please consult factory.

2

Thermo Scientific AquaSensors


Thermo Scientific AquaSensors

Table 1: DeviceNet data rate versus drop length Data Rate

Trunk Distance

125 kbps 250 kbps 500 kbps

Drop Length Maximum

Cumulative

328 ft (100 meters)

20 ft (6 meters)

512 ft (156 meters)

328 ft (100 meters)

20 ft (6 meters)

256 ft (78 meters)

328 ft (100 meters)

20 ft (6meters)

128 ft (39 meters)

Note: Per DeviceNet Adaptation of CIP, Edition 1.9, November 2010

Table 2: Modbus RTU (RS-485) data rate versus drop length Data Rate

Trunk Distance

19.2 kbps

3280 ft (1000 meters)

Drop Length Maximum

Cumulative

65 ft (20 meters)

131 ft (40 meters)

Note: Per Modbus Serial Line Protocol and Implementation Guide, V1.02, http://modbus-ida.org/docs/Modbus_over_serial_line_/V1_02.pdf

Table 3: CANopen data rate versus drop length Data Rate

Trunk Distance

125 kbps

Drop Length Maximum

Cumulative

1640 ft (500 meters)

72 ft (22 meters)

360 ft (110 meters)

250 kbps

820 ft (250 meters)

36 ft (11 meters)

180 ft (55 meters)

500 kbps

328 ft (100 meters)

8 ft (5.5 meters)

90 ft (27.5 meters)

Notes: Per ISO 11898 Controller area network (CAN) standard.

For Profibus DP (V0/V1), connect up to 30 Modbus RTU over RS-485 Datasticks with a Profibus to DataStick Adapter (Part Number: CA26R on page 4).

See Page 4 for communications hardware and accessories.

2012 Product Pricing Guide

3


Product Pricing Guide 2012

Profibus to DataStick™ Adapter Model Number CA P  rofibus to DataStick Adapter connects up to 30 Modbus RTU over RS-485 DataSticks to a Profibus DP (V0 or V1) network with M12 connector. Full-featured measurement, calibration, configuration and diagnostics. 24 VDC Power.

Reserved Category

-----

Reserved Category

CA

26

R

Communications Hardware Profibus Accessories M12 Profibus Tee Connector Male Termination Network Female Termination Network Female Field-wireable M12 Connector Male Field-wireable M12 Connector 9-Pin Male D Connector Profibus Cable

Modbus/DeviceNet Accessories 1 Port Device Tap, DIN Rail 2 Port Device Tap, DIN Rail 4 Port Device Tap, NEMA4X Multi-port termination resistors Extension Cable

EtherNet/IP Accessories Modbus to EtherNet Gateway Power Injector with Cross Over cable PoE Switch – Consumer Grade

General Accessories RS-232 junction w/power and connector AC/DC Power Supply AquaComm™ Software (CD copy only; also available as free Web download)

-----

Profibus to DataStick Adapter Part Number

Description

Part Number

Price

Mating connector for Profibus to DataStick Adapter M12 Termination at the end of the network-Male M12 Termination at the end of the network-Female Female field-wireable connection to M12 Tee Profibus cable connection to M12 Tee Profibus cable to D connector (usually to PLC) Profibus network cable (purple).

AS-RKSW2R AS-RSSW45 AS-RKSW45 AS-BMWS81 AS-BMSWS8 AS-D9S PSECxx; xx=ft

$125.00 $35.00 $35.00 $55.00 $105.00 $115.00 $3.75/ft

1 DataStick connection on network with DIN rail 2 DataStick connections on network with DIN rail 4 DataStick connections on network with NEMA4X Termination for Device Taps at the end of network DataStick extension cable

AS-810-902 AS-810-901 AS-810-900 MPTR DSECxx; xx=ft

$35.00 $50.00 $150.00 $6.00 $3.50/ft

Up to 32 parameters from multiple Modbus DataSticks One DataStick plugs in directly for power injection. Up to 4 DataSticks plug in directly.

AS-451EM-D AS-POE-48i AS-FS108P

$750.00 $95.00 $260.00

Connect RS-232 DataStick to power and computer External 90-240 VAC input to 24VDC output PC software for USB and RS-232 DataSticks.

JBOX232 PS24 AquaComm

$75.00 $139.00 $15.00

Notes: No discounts are allowed on part numbers with an AS prefix. Consult communications hardware data sheet for product descriptions. Use Port Device Tap to connect multiple Modbus RTU DataSticks to the Profibus to DataStick Adapter.

4

Thermo Scientific AquaSensors

Base Price $725.00


Thermo Scientific AquaSensors

AV38 Display Interface for DataStick Sensors Model Number AV38 Single or Dual Input. Local Display/Controller for calibration and configuration capability of multiple DataStick systems. Full featured analog output and relay functions. PID function standard with pH and conductivity. pH compensation available with AquaChlor free chlorine system. NEMA 4X Wall mount standard. Panel and pipe mount options available.

Outputs

Base Price $260.00

Price Adder ----$103.00

B One 4-20mA Analog Output Only C Two 4-20mA Analog Outputs and Two Alarm/Control/Wash Relays (Form C)

Reserved Category

-----

Host Communications 0 1 2 4 5 6 7

Price Adder ----$105.00 $105.00 $105.00 $150.00 $180.00 $245.00

None ASCII over RS-232 Modbus RTU over RS-232 Modbus RTU over RS-485. For Modbus and Profibus networks. DeviceNet CANopen EtherNet/IP, Modbus/TCP, TCP/IP

Relays

----See Notes 1

A No Relays C Two Alarm/Control/Wash Relays (Form C)

Power

Price Adder ----$100.00

1 24 VDC 2 100 to 240 VAC

AV38

B

AV38 Local Display Part Number

Notes: Relays are only available and supplied when choosing 2 analog outputs. For Profibus DP (V0/V1), configure the AV38 with Modbus RTU over RS-485 Host Communications and purchase a Profibus Gateway (PN: CA26R on Page 4).

Hardware

Description

Part Number

Price

¼ DIN Panel Mount

Hardware for mounting in a 3.5” square cut out.

DIN4KIT

$46.00

½ DIN Panel Mount

Hardware for mounting in a 5.25” square cut out.

DIN2KIT

$57.00

Pipe Mount

Hardware to mount onto a 2” pipe.

PIP2KIT

$36.00

AC/DC Power Supply

External 90-240 VAC input to 24VDC output.

PS24

$139.00

Sun Shield

To protect Display from full sunlight

SUN01

$180.00

Cord Grips

½ Inch cord grips for conduit boxes (Qty 5)

CGRIP01

2012 Product Pricing Guide

$26.00

5


Product Pricing Guide 2012

Thermo Scientific AnalogPlus™ System Components AV88 Universal Analyzer for use with AnalogPlus Sensors Model Number AV88 Universal Analyzer for use with all AnalogPlus Sensors. Includes two 4-20mA analog outputs with PID for pH and conductivity in the base configuration. Optional relays with alarm, control and wash functions. NEMA 4X wall mount standard. Optional ¼ DIN Panel, ½ DIN Panel and pipe mounting.

Measurement Parameter A B C D E F G K L M N

Base Price $645.00

Price Adder --------------------$95.00 $95.00 -----------------

pH (for differential sensors) ORP Contacting Conductivity (for 1.0 Cell Constant Sensors) Resistivity (for 0.01 Cell Constant Sensors) Toroidal Conductivity Dissolved Oxygen Ozone pH (for Combination Sensors) Contacting Conductivity (for 0.1 Cell Constant Sensors) Resistivity (for 0.05 Cell Constant Sensors) ORP (for Combination Sensors)

Reserved Category

-----

Host Communications (Available only with 24 VDC power option) 0 1 2 4 5 6

None ASCII over RS-232 Modbus RTU over RS-232 Modbus RTU over RS-485. For Modbus and Profibus networks. DeviceNet CANopen

Price Adder ----$105.00 $105.00 $105.00 $150.00 $180.00

Relays

----$62.00

A None C Two Relays

Power 1 24 VDC 2 100 to 240 VAC (Host communications option is not available)

AV88

B

Price Adder ----$100.00

AV88 Universal Analyzer Part Number

Notes: Host communications option is only available with 24 VDC powered versions of the AV88 Analyzer.

6

For Profibus DP (V0/V1), configure the AV88 Analyzer with Modbus RTU over RS-485 Host Communications and purchase of the Profibus to DataStick Adapter (Part # CA26R on Page 4).

The AV88 Analyzer comes standard with one personality module. Additional modules can be used to reconfigure the measurement parameter in the field. See table on next page for details.

Thermo Scientific AquaSensors


Thermo Scientific AquaSensors

Hardware

Description

Part Number

Price

pH (differential) personality module pH (combination) personality module ORP (differential) personality module ORP (combination) personality module Contacting Conductivity personality module Resistivity personality module Toroidal Conductivity personality module Dissolved Oxygen (ppm) personality module Ozone personality module Contacting Conductivity personality module Resistivity personality module

Reconfigure AV88 for pH (differential) Reconfigure AV88 for pH (combination) Reconfigure AV88 for ORP (differential) Reconfigure AV88 for ORP (combination) Reconfigure AV88 for Conductivity (1.0 cell k) Reconfigure AV88 for Resistivity (0.01 cell k) Reconfigure AV88 for Toroidal Conductivity Reconfigure AV88 for Dissolved Oxygen (ppm) Reconfigure AV88 for Ozone Reconfigure AV88 for Conductivity (0.10 cell k) Reconfigure AV88 for Resistivity (0.05 cell k)

PMPH01 PMPC01 PMRP01 PMRC01 PMCC01 PMCR01 PMTC01 PMDO01 PMOZ01 PMCC02 PMCR02

$80.00 $80.00 $80.00 $80.00 $80.00 $80.00 $80.00 $125.00 $125.00 $80.00 $80.00

¼ DIN Panel Mount Kit

Hardware for mounting in a 3.5” square cut out.

DIN4KIT

$46.00

½ DIN Panel Mount Kit

Hardware for mounting in a 5.25” square cut out.

DIN2KIT

$57.00

Pipe Mount Kit

Hardware to mount onto a 2” pipe.

PIP2KIT

$36.00

AC/DC Power Supply

External 90-240 VAC input to 24VDC output.

PS24

$139.00

Sun Shield Assembly

To protect Display from full sunlight

SUN01

$180.00

Cord Grips

½ Inch cord grips for conduit boxes (Qty 5)

CGRIP01

$26.00

Alpha 2000 Series for use with AquaSensors AnalogPlus Sensors Model 2000D AnalogPlus pH/ORP Analyzer Model Number

Base Price $899.00

TSPHCTP2000D D  ifferential pH/ORP Analyzer for use with AnalogPlus pH or ORP sensors. Two 4-20mA Analog Outputs. Three Relays. ½ DIN Enclosure. NEMA4X. Std Wall or Surface Mount.

TSPHCTP2000D

AnalogPlus pH/ORP Analyzer Part Number

Note: Replaces former AquaSensors P99 Model

Model 2000W AnalogPlus Contacting Conductivity Analyzer Model Number TSCONCTP2000W C  ontacting Conductivity Analyzer for use with AnalogPlus conductivity sensors. Two 4-20mA Analog Outputs. Three Relays. ½ DIN Enclosure. NEMA4X. Wall or Surface Mount.

TSCONCTP2000W

Base Price $899.00

AnalogPlus Contacting Conductivity Analyzer Part Number

Note: Replaces former AquaSensors C99 Model

Hardware

Description

Part Number

Price

½ DIN Panel Mount Kit

Hardware for mounting in a 5.25” square cut out.

DIN2KIT

$57.00

2012 Product Pricing Guide

7


Product Pricing Guide 2012

Thermo Scientific pH Measurement DataStick Differential pH Sensor Head Model Number PH D  ifferential pH Sensor Head plugs in to any DataStick sensor body and provides factory-calibrated measurement. Integral ground rod, temperature measurement and replaceable salt bridge/reference solution.

Body Material

Price Adder ----$60.00

2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, High Temperature)

Measurement Electrode 1 2 3 4 5

General Purpose Glass (Standard) HF Resistant Glass (recommended for hydrofluoric acid (HF) applications) Low Temperature Glass (recommended for normal operating temperatures below 5° C) Pure Water Glass (recommended for pure water conductivity below 10µS/cm) High Temperature Glass (recommended for normal operating temperatures above 85° C)

Sensor Tip A Protected Electrode (Standard) B Process Flat (Reduced protrusions) C Face Seal for flow chamber installations (Available only with PEEK sensor heads)

Reserved Category

1 316 Stainless Steel (for HF or customer specified applications) 2 Titanium (standard configuration) 3 Hastelloy C (for heavy industrial applications)

8

Thermo Scientific AquaSensors

1A

Price Adder ----$50.00 $50.00 $50.00 $50.00 Price Adder ----$30.00 $40.00 -----

Ground Rod

PH

Base Price $260.00

DataStick pH Sensor Head Part Number

Price Adder $35.00 ----Call for Price


Thermo Scientific AquaSensors

Price

Reference (for details)

DS11-WA DS21-WA

$785.00 $690.00

See Page 1

CPVC Modbus RTU with 10 foot cable

CA22B1A

$205.00

See Page 2

Profibus to DataStick Adapter

Modbus RTU DataSticks connect to Profibus DP

CA26R

$725.00

See Page 4

Suggested Displays *

Description

Part Number

Price

Reference (for details)

Suggested DataStick Components*

Description

Part Number

Universal Sensor Body Same in CPVC material

316 Stainless Steel 1-inch sensor body CPVC 1-inch sensor body

Communications Adapter

AV38 Local Display/Controller Same with added features

One 4-20mA output, PID. 24VDC. Two 4-20mA outs, PID, 2 Relays, Modbus Host Comms, 24VDC. M12 Termination at the end of the network-Male

AV38BB0A1 AV38CB4C1

$260.00 $468.00

See Page 5

Mounting Hardware

Description

Part Number

Price

1.5” Union Mount Assembly

Tee with locking collar, 316 Stainless Steel Tee with locking collar, CPVC

MH1041 MH1042

$345.00 $211.00

1.0” Tee

Schedule 40, Stainless Steel Schedule 80, CPVC

MH3011 MH3022

$129.00 $77.00

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount

MH1242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount and inflatable float

MH1252

$479.00

1.5” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1112 MH1111 MH1122 MH1121

$479.00 $891.00 $582.00 $1199.00

Tri-Clamp Tee Assembly

2” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1261

$304.00

Flow Chamber (requires Face Seal sensor tip)

Flow Chamber with mounting plate w/Kynar fittings Flow Chamber with mounting plate w/SS fittings

FC001 FC002

$458.00 $458.00

Ball Float Platform

PVC Float Platform for up to 4 DataSticks

MHFB02

$582.00

Wash Hardware

Attach air/water purge block to DataStick body. Works with user supplied compressor & AV38 wash relay or PLC.

MH1132

$258.00

* Table above shows selected DataStick and AV38 components. See referenced pages for options. Notes: See end of pH section for calibration and storage solutions and other accessories.

Other mounting hardware configurations may be available on request. Please consult factory for details. Refer to data sheet for mounting hardware configuration details.

2012 Product Pricing Guide

9


Product Pricing Guide 2012

AnalogPlus Differential pH Sensor – 1.0 Inch Body Model Number SP Differential pH Sensor in 1-inch body. Cable connects to any AV88 Universal Analyzer, Alpha 2000D Analyzer or compatible differential pH analyzers. Integral ground rod, temperature element, replaceable salt bridge and reference solution. Standard 1-inch NPT mounting. Options for Tri-clamp and ball valve mounting.

Body Material

Price Adder ----$60.00

2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, Chemically Resistant)

Measurement Electrode 1 2 3 4 5

General Purpose Glass (Standard) HF Resistant Glass (recommended for hydrofluoric acid (HF) applications) Low Temperature Glass (recommended for normal operating temperatures below 5° C) Pure Water Glass (recommended for pure water conductivity below 10µS/cm) High Temperature Glass (recommended for normal operating temperatures above 85° C)

Sensor Tip

Temperature Element and Hook-up 7 PT1000 for AquaMetrix Analyzer Hook-up 8 NTC300 for P99, Alpha 2000D & GLI/Hach Analyzer Hook-up 9 PT1000 for AV88 Universal Analyzer Hook-up

Ground Rod D 316 Stainless Steel (for HF or customer specified applications) E Titanium (standard configuration) F Hastelloy C (for heavy industrial applications)

Cable Length

Price Adder ------------Price Adder $35.00 ----Call for Price Price Adder ----$25.00 $50.00

10 10 Feet 20 20 Feet 30 30 Feet

AnalogPlus Differential pH Sensor Part Number

SP

Part Number Suffixes for Special Body Construction -IN15 -S20 -S25

Thermo Scientific AquaSensors

Price Adder ----$50.00 $50.00 $50.00 $50.00 Price Adder ----$30.00

A Protected Electrode B Process Flat (Reduced protrusions)

10

Base Price $545.00

1.5-inch Ball Valve Insertion Mount (No front threads) Sanitary Style 2.0” Tri-clamp Sanitary Style 2.5” Tri-clamp

Price Adder $60.00 $125.00 $195.00


Thermo Scientific AquaSensors

Reference (for details)

Suggested Analyzers*

Description

Part Number

Price

AV88 Universal Analyzer Same with digital output option & 24 VDC power

2 Outputs, 2 relays, PID. AC power. ¼ DIN. 2 Outputs, PID , Modbus. 24VDC. ¼ DIN.

AV88AB0C2 AV88AB4A1

$807.00 $750.00

See Page 6

Alpha 2000D pH Analyzer

2 Outputs, 3 relays. AC power. ½ DIN.

TSPHCTP2000D

$899.00

See Page 7

Mounting Hardware

Description

Part Number

1.5” Union Mount Assembly

Tee with locking collar, 316 Stainless Steel Tee with locking collar, CPVC

MH3041 MH3042

$345.00 $211.00

Price

1” Tee

Schedule 40, Stainless Steel Schedule 80, CPVC

MH3011 MH3022

$129.00 $77.00

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount

MH1242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount and inflatable float

MH1252

$479.00

1.5” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1112 MH1111 MH1122 MH1121

$479.00 $891.00 $582.00 $1199.00

Tri-Clamp Tee Assembly

2” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1261

$304.00

Junction box Extension Cable

For extension cables. Terminal strip included. AnalogPlus extension cable.

JBOXX01 APECxx, xx=ft

$41.00 $3.75/ft

Wash Hardware

Attach air/water purge block to sensor body. Works with compressor & AV38 wash relay.

MH1132

$258.00

* Table above shows selected analyzer configurations. See referenced pages for options. Notes: See end of pH section for calibration and storage solutions and other accessories.

Refer to data sheet for mounting hardware configuration details.

2012 Product Pricing Guide

11


Product Pricing Guide 2012

AnalogPlus Differential pH Sensor – 1.5 Inch Body Model Number

Base Price $545.00

FP Differential pH Sensor in 1.5-inch body. Cable connects to any AV88 Universal Analyzer, Alpha 2000D Analyzer or compatible differential pH analyzers. Integral ground rod, temperature, replaceable salt bridge and reference solution. Standard 1.5-inch NPT mounting. Options for tri-clamp and ball valve mounting.

Body Material

Price Adder ----$120.00

2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, Chemically Resistant)

Measurement Electrode 1 2 3 4 5

Price Adder ----$50.00 $50.00 $50.00 $50.00

General Purpose Glass (recommended for most applications) HF Glass (recommended for hydrofluoric acid applications) Low Temperature Glass (recommended for normal operating temperatures below 5° C) Pure Water Glass (recommended for pure water conductivity below 10µS/cm) High Temperature Glass (recommended for normal operating temperatures above 85° C)

Sensor Tip

Price Adder ----$30.00

A Protected Electrode (Standard) B Process Flat (Reduced protrusions)

Temperature Element and Hook-up

Price Adder -------------

7 PT1000 for AquaMetrix Analyzer Hook-up 8 NTC300 for P99, Alpha 2000D & GLI/Hach Analyzer Hook-up 9 PT1000 for AV88 Universal Analyzer Hook-up

Ground Rod D 316 Stainless Steel (for HF or customer specified applications) E Titanium (standard configuration) F Hastelloy C (for heavy industrial applications)

Price Adder $35.00 ----Call for Price

Cable Length

Price Adder ----$25.00 $50.00

10 10 Feet 20 20 Feet 30 30 Feet

AnalogPlus pH Sensor Part Number

FP

Part Number Suffixes for Special Body Construction -INS -INSW -S25

12

Thermo Scientific AquaSensors

Insertion – smooth body. For 2” valve hardware Insertion w/Teflon® wiper for MH1181-FP valve hardware Sanitary Style 2.5” Tri-clamp

Price Adder $60.00 $120.00 $195.00


Thermo Scientific AquaSensors

Reference (for details)

Suggested Analyzers*

Description

Part Number

Price

AV88 Universal Analyzer Same with digital output option & 24 VDC power

2 Outputs, 2 relays, PID. AC power. ¼ DIN. 2 Outputs, PID , Modbus. 24VDC. ¼ DIN.

AV88AB0C2 AV88AB4A1

$807.00 $750.00

See Page 6

Alpha 2000D pH Analyzer

2 Outputs, 3 relays. AC power. ½ DIN.

TSPHCTP2000D

$899.00

See Page 7

Mounting Hardware

Description

Part Number

2” Union Mount Assembly

Tee with locking collar, 316 Stainless Steel Tee with locking collar, CPVC

MH2031 MH2032

$541.00 $273.00

Price

1.5” Tee

Schedule 40, Stainless Steel Schedule 80, CPVC

MH2011 MH2022

$139.00 $88.00

Immersion Assembly

7 ft PVC extension with junction box – 1.5” Sensors

MH2083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1.5” Sensors with swivel hand rail mount

MH2242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1.5” Sensors with swivel hand rail mount and inflatable float

MH2252

$479.00

2” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1172-FP MH1171-FP MH1182-FP MH1181-FP

Tri-Clamp Tee Assembly

2.5” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1271

$304.00

Junction box Extension Cable

For extension cables. Terminal strip included. AnalogPlus extension cable.

JBOXX01 APECxx, xx=ft

$41.00 $3.75/ft

Wash Hardware

Attach air/water purge block to sensor body. Works with compressor & AV38 wash relay.

MH2132

$258.00

$510.00 $1281.00 $716.00 $1540.00

* Table above shows selected analyzer configurations. See referenced pages for options. Notes: See end of pH section for calibration and storage solutions and other accessories.

Refer to data sheet for mounting hardware configuration details.

2012 Product Pricing Guide

13


Product Pricing Guide 2012

pH Calibration and Storage Solutions and other Accessories Product

Description

Part Number

Price

For Calibration – 475ml bottle For Calibration – 475ml bottle For Calibration – 475ml bottle For sensor reference chamber – 60ml bottle For sensor reference chamber – 500ml bottle Place in storage caps to keep glass electrode wet – 475ml bottle

910104 910107 910110 RCS01 RCS01-500 910001

$17.50 $17.50 $17.50 $20.00 $80.00 $51.00

PEEK, Protected Qty 1 PEEK, Protected Qty 3 PEEK, Protected Qty 10

For all pH and ORP sensors with PEEK bodies. Quantity 1 For all pH and ORP sensors with PEEK bodies. Quantity 3 For all pH and ORP sensors with PEEK bodies. Quantity 10

SBS01-1 SBS01-3 SBS01-10

$48.00 $125.00 $370.00

PEEK, Process Flat Qty 1 PEEK, Process Flat Qty 3 PEEK, Process Flat Qty 10

For all pH and ORP sensors with PEEK bodies. Quantity 1 For all pH and ORP sensors with PEEK bodies. Quantity 3 For all pH and ORP sensors with PEEK bodies. Quantity 10

SBS02-1 SBS02-3 SBS02-10

$55.00 $140.00 $425.00

PEEK, Face Seal Qty 1 PEEK, Face Seal Qty 3 PEEK, Face Seal Qty 10

For all pH and ORP sensors with PEEK bodies. Quantity 1 For all pH and ORP sensors with PEEK bodies. Quantity 3 For all pH and ORP sensors with PEEK bodies. Quantity 10

SBS08-1 SBS08-3 SBS08-10

$58.00 $143.00 $428.00

CPVC, Protected Qty 1 CPVC, Protected Qty 3 CPVC, Protected Qty 10

For all pH and ORP sensors with CPVC bodies. Quantity 1 For all pH and ORP sensors with CPVC bodies. Quantity 3 For all pH and ORP sensors with CPVC bodies. Quantity 10

SBS03-1 SBS03-3 SBS03-10

$42.00 $105.00 $310.00

CPVC, Process Flat Qty 1 CPVC, Process Flat Qty 3 CPVC, Process Flat Qty 10

For all pH and ORP sensors with CPVC bodies. Quantity 1 For all pH and ORP sensors with CPVC bodies. Quantity 3 For all pH and ORP sensors with CPVC bodies. Quantity 10

SBS04-1 SBS04-3 SBS04-10

$50.00 $125.00 $370.00

Storage cover

Comes with sponge to keep stored sensor electrodes wet

SBC01

Solutions 4 pH buffer 7 pH buffer 10 pH buffer Standard Cell Solution – 60ml Standard Cell Solution – 500ml pH storage solution

Salt Bridges

$6.00

Notes: Standard external salt bridge junctions constructed with PVDF (Kynar). Ceramic available on request.

Standard fill solutions can be gelled for high temperature applications on request.

Refer to data sheet for mounting hardware configuration details

pH Sensor Images SP31A9E10 1.0 Inch pH Sensor; PEEK w/Sanitary Fitting

pH DataStick System (Modbus) PH31A1A2/ DS11-WA/CA12B1A

14

Thermo Scientific AquaSensors

1.5 Inch pH CPVC Sensor FP21A8E10

1.5 Inch pH Sensor with Teflon® Wiper Insertion Style FP31A8E10-INSW


Thermo Scientific AquaSensors

Thermo Scientific ORP Measurement DataStick Differential ORP Sensor Head Model Number ORP D  ifferential ORP Sensor Head plugs in to any DataStick sensor body and provides factory-calibrated measurement. Integral ground rod, temperature measurement and replaceable salt bridge/reference solution.

Body Material

Base Price $290.00

Price Adder ----$60.00

2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, High Temperature)

Measurement Electrode

Price Adder ----$60.00

1 Platinum (Standard applications) 2 Gold (Poisoning applications)

Sensor Tip

Price Adder ----$30.00 $40.00

A Protected Electrode (Standard) B Process Flat (Reduced protrusions) C Face Seal for flow chamber installations (PEEK material only)

Reserved Category

-----

Ground Rod 1 316 Stainless Steel (for HF or customer specified applications) 2 Titanium (standard configuration) 3 Hastelloy C (for heavy industrial applications)

ORP

1A

Price Adder $35.00 ----Call for Price

DataStick ORP Sensor Head Part Number

2012 Product Pricing Guide

15


Product Pricing Guide 2012

DataStick Differential ORP Sensor Head continued Price

Reference (for details)

DS11-WA DS21-WA

$785.00 $690.00

See Page 1

CPVC Modbus RTU with 10 foot cable

CA22B1A

$205.00

See Page 2

Profibus to DataStick Adapter

Modbus RTU DataSticks connect to Profibus DP

CA26R

$725.00

See Page 4

Suggested Displays*

Description

Part Number

Price

Reference (for details)

AV38 Local Display/Controller Same with added features

One 4-20mA output, PID. 24VDC. Two 4-20mA outs, PID, 2 Relays, Modbus Host Comms, 24VDC.

AV38BB0A1 AV38CB4C1

Suggested DataStick Components*

Description

Part Number

316 Stainless Steel 1-inch sensor body CPVC 1-inch sensor body

Communications Adapter

Universal Sensor Body Same in CPVC material

Description

Part Number

1.5” Union Mount Assembly

Tee with locking collar, 316 Stainless Steel Tee with locking collar, CPVC

MH1041 MH1042

$345.00 $211.00

1.0” Tee

Schedule 40, Stainless Steel Schedule 80, CPVC

MH3011 MH3022

$129.00 $77.00

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount

MH1242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount and inflatable float

MH1252

$479.00

1.5” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1112 MH1111 MH1122 MH1121

$479.00 $891.00 $582.00 $1199.00

Tri-Clamp Tee Assembly

2” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1261

$304.00

Flow Chamber (requires Face Seal sensor tip)

Flow Chamber with mounting plate w/Kynar fittings Flow Chamber with mounting plate w/SS fittings

FC001 FC002

$458.00 $458.00

Ball Float Platform

PVC Float Platform for up to 4 DataSticks

MHFB02

$582.00

Wash Hardware

Attach air/water purge block to DataStick body. Works with user supplied compressor & AV38 wash relay or PLC.

MH1132

$258.00

Notes: See end of ORP section for calibration and storage solutions and other accessories.

16

See Page 5

Mounting Hardware

* Tables above show selected DataStick and AV38 components. See referenced pages for options.

$260.00 $468.00

Refer to data sheet for mounting hardware configuration details.

Thermo Scientific AquaSensors

Price


Thermo Scientific AquaSensors

AnalogPlus ORP Sensor – 1.0 Inch Body Model Number

Base Price $595.00

SR Differential ORP Sensor in 1-inch body. Cable connects to any AV88 Universal Analyzer, Alpha 2000D Analyzer or compatible differential pH/ORP analyzers. Integral ground rod, temperature, replaceable salt bridge and reference solution. Standard 1-inch NPT mounting. Options for Tri-clamp and ball valve mounting.

Body Material

Price Adder ----$60.00

2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, High Temperature)

Measurement Electrode

Price Adder ----$60.00

1 Platinum (Standard applications) 2 Gold (Poisoning applications)

Sensor Tip

Price Adder ----$30.00

A Protected Electrode (Standard) B Process Flat (Reduced protrusions)

Temperature Element and Hook-up 7 PT1000 for AquaMetrix Analyzer Hook-up 8 NTC300 for P99, Alpha 2000D & GLI/Hach Analyzer Hook-up 9 PT1000 for AV88 Universal Analyzer Hook-up

Ground Rod D 316 Stainless Steel (for HF or customer specified applications) E Titanium (standard configuration) F Hastelloy C (for heavy industrial applications)

Cable Length

Price Adder ------------Price Adder $35.00 ----Call for Price Price Adder ----$25.00 $50.00

10 10 Feet 20 20 Feet 30 30 Feet

AnalogPlus ORP Sensor Part Number

SR

Part Number Suffixes for Special Body Construction -IN15 -S20 -S25

Price Adder

1.5-inch Ball Valve Insertion Mount (no front threads) Sanitary Style 2.0” Tri-clamp Sanitary Style 2.5” Tri-clamp

2012 Product Pricing Guide

$60.00 $125.00 $195.00

17


Product Pricing Guide 2012

AnalogPlus ORP Sensor - 1.0 Inch Body continued Description

Part Number

AV88 Universal Analyzer Same with digital output option & 24VDC power

2 outputs, 2 relays, PID. AC power. ¼ DIN. 2 outputs, PID, Modbus. 24VDC. ¼ DIN.

AV88BB0C2 AV88BB4A1

$807.00 $750.00

See Page 6

Alpha 2000D pH/ORP Analyzer

2 outputs, 3 relays. AC power. ½ DIN.

TSPHCTP2000D

$899.00

See Page 7

Mounting Hardware

Description

Part Number

1.5” Union Mount Assembly

Tee with locking collar, 316 Stainless Steel Tee with locking collar, CPVC

MH3041 MH3042

$345.00 $211.00

1” Tee

Schedule 40, Stainless Steel Schedule 80, CPVC

MH3011 MH3022

$129.00 $77.00

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount

MH1242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount and inflatable float

MH1252

$479.00

1.5” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1112 MH1111 MH1122 MH1121

$479.00 $891.00 $582.00 $1199.00

Tri-Clamp Tee Assembly

2” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1261

$304.00

Junction Box Extension Cable

For extension cables. Terminal strip included. AnalogPlus extension cable.

JBOXX01 APECxx; xx=ft

$41.00 $3.75/ft

Wash Hardware

Attach air/water purge block to sensor body. Works with compressor & AV88 wash relay.

MH1132

$258.00

* Table above shows selected analyzer configurations. See referenced pages for options. Note: See end of ORP section for calibration and storage solutions and other accessories.

18

Price

Reference (for details)

Suggested Analyzers*

Thermo Scientific AquaSensors

Price


Thermo Scientific AquaSensors

AnalogPlus ORP Sensor – 1.5 Inch Body Model Number

Base Price $595.00

FR Differential ORP Sensor in 1.5-inch body. Cable connects to any AV88 Universal Analyzer, Alpha 2000D Analyzer or compatible differential pH/ORP analyzers. Integral ground rod, temperature, replaceable salt bridge and reference solution. Standard 1.5-inch NPT mounting. Options for Tri-clamp and ball valve mounting.

Body Material

Price Adder ----$120.00

2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, High Temperature)

Measurement Electrode

Price Adder ----$60.00

1 Platinum (Standard applications) 2 Gold (Poisoning applications)

Sensor Tip

Price Adder ----$30.00

A Protected Electrode (Standard) B Process Flat (Reduced protrusions)

Temperature Element and Hook-up

Price Adder -------------

7 PT1000 for AquaMetrix Analyzer Hook-up 8 NTC300 for P99, Alpha 2000D & GLI/Hach Analyzer Hook-up 9 PT1000 for AV88 Universal Analyzer Hook-up

Ground Rod D 316 Stainless Steel (for HF or customer specified applications) E Titanium (standard configuration) F Hastelloy C (for heavy industrial applications)

Price Adder $35.00 ----Call for Price

Cable Length

Price Adder ----$25.00 $50.00

10 10 Feet 20 20 Feet 30 30 Feet

AnalogPlus ORP Sensor Part Number

FR

Part Number Suffixes for Special Body Construction -INS -INSW -S25

Price Adder

Insertion – smooth body. For 2” valve hardware Insertion w/Teflon® wiper for MH1181-FP valve hardware Sanitary Style 2.5” Tri-clamp

2012 Product Pricing Guide

$60.00 $120.00 $195.00

19


Product Pricing Guide 2012

AnalogPlus ORP Sensor - 1.5 Inch Body continued Description

Part Number

AV88 Universal Analyzer Same with digital output option & 24 VDC POWER

2 outputs, 2 relays, PID. AC power. ¼ DIN. 2 outputs, PID, Modbus. 24VDC. ¼ DIN.

AV88BB0C2 AV88BB4A1

$807.00 $750.00

See Page 6

Alpha 2000D pH/ORP Analyzer

2 outputs, 3 relays. AC power. ½ DIN.

TSPHCTP2000D

$899.00

See Page 7

Mounting Hardware

Description

Part Number

2” Union Mount Assembly

Tee with locking collar, 316 Stainless Steel Tee with locking collar, CPVC

MH2031 MH2032

$541.00 $273.00

1.5” Tee

Schedule 40, StaInless Steel Schedule 80, CPVC

MH2011 MH2022

$139.00 $88.00

Immersion Assembly

7 ft PVC extension with junction box – 1.5” Sensors

MH2083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1.5” Sensors with swivel hand rail mount

MH2242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1.5” Sensors with swivel hand rail mount and inflatable float

MH2252

$479.00

2” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1172-FP MH1171-FP MH1182-FP MH1181-FP

Tri-Clamp Tee Assembly

2.5” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1271

$304.00

Junction Box Extension Cable

For extension cables. Terminal strip included. AnalogPlus extension cable.

JBOXX01 APECxx; xx=ft

$41.00 $3.75/ft

Wash Hardware

Attach air/water purge block to sensor body. Works with compressor & AV88 wash relay.

MH2132

$258.00

* Table above shows selected analyzer configurations. See referenced pages for options. Notes: See end of ORP section for calibration and storage solutions and other accessories.

20

Price

Reference (for details)

Suggested Analyzers*

Refer to data sheet for mounting hardware configuration details.

Thermo Scientific AquaSensors

Price

$510.00 $1281.00 $716.00 $1540.00


Thermo Scientific AquaSensors

ORP Calibration and Storage Solutions and other Accessories Product

Description

Part Number

Price

ORP Calibration Solution – 500ml bottle ORP Calibration Solution – 500ml bottle For sensor reference chamber – 60ml bottle For sensor reference chamber – 500ml bottle For storage caps to keep glass electrode wet – 60ml bottle

ORPSOL200 ORPSOL600 RCS01 RCS01-500 RCS04

$35.00 $35.00 $20.00 $80.00 $20.00

PEEK, Protected Qty 1 PEEK, Protected Qty 3 PEEK, Protected Qty 10

For all pH and ORP sensors with PEEK bodies. Quantity 1 For all pH and ORP sensors with PEEK bodies. Quantity 3 For all pH and ORP sensors with PEEK bodies. Quantity 10

SBS01-1 SBS01-3 SBS01-10

$48.00 $125.00 $370.00

PEEK, Process Flat Qty 1 PEEK, Process Flat Qty 3 PEEK, Process Flat Qty 10

For all pH and ORP sensors with PEEK bodies. Quantity 1 For all pH and ORP sensors with PEEK bodies. Quantity 3 For all pH and ORP sensors with PEEK bodies. Quantity 10

SBS02-1 SBS02-3 SBS02-10

$55.00 $140.00 $425.00

PEEK, Face Seal Qty 1 PEEK, Face Seal Qty 3 PEEK, Face Seal Qty 10

For all pH and ORP sensors with PEEK bodies. Quantity 1 For all pH and ORP sensors with PEEK bodies. Quantity 3 For all pH and ORP sensors with PEEK bodies. Quantity 10

SBS08-1 SBS08-3 SBS08-10

$58.00 $143.00 $428.00

CPVC, Protected Qty 1 CPVC, Protected Qty 3 CPVC, Protected Qty 10

For all pH and ORP sensors with CPVC bodies. Quantity 1 For all pH and ORP sensors with CPVC bodies. Quantity 3 For all pH and ORP sensors with CPVC bodies. Quantity 10

SBS03-1 SBS03-3 SBS03-10

$42.00 $105.00 $310.00

CPVC, Process Flat Qty 1 CPVC, Process Flat Qty 3 CPVC, Process Flat Qty 10

For all pH and ORP sensors with CPVC bodies. Quantity 1 For all pH and ORP sensors with CPVC bodies. Quantity 3 For all pH and ORP sensors with CPVC bodies. Quantity 10

SBS04-1 SBS04-3 SBS04-10

$50.00 $125.00 $370.00

Storage cover

Comes with sponge to keep stored sensor electrodes wet

SBC01

Solutions 200mV Solution 600mV Solution Standard Cell Solution – 60ml Standard Cell Solution – 500ml ORP storage solution

Salt Bridges

2012 Product Pricing Guide

$6.00

21


Product Pricing Guide 2012

Thermo Scientific Contacting Conductivity/Resistivity Measurement ™ DataStick Contacting Conductivity Sensor Head

Model Number

Base Price $215.00

CC T wo Electrode Conductivity Sensor Head plugs into any DataStick sensor body and provides factory-calibrated measurement. Integral temperature.

Body Material

Price Adder ----$60.00

2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, High Temperature)

Electrode Material

Price Adder ----$50.00

1 Titanium (Standard) 2 316 Stainless Steel

Cell Constant

Price Adder --------$145.00

A 0.1 Cell Constant (500 µS/cm Range. PEEK Material Recommended) B 1.0 Cell Constant (5000 µS/cm Range) C 0.01 Cell Constant (Resistivity to 50 µS/cm Range. PEEK Material Required)

CC

DataStick Contacting Conductivity Sensor Head Part Number

Price

Reference (for details)

DS11-WA DS21-WA

$785.00 $690.00

See Page 1

CPVC Modbus RTU with 10 foot cable

CA22B1A

$205.00

See Page 2

Profibus to DataStick Adapter

Modbus RTU DataSticks connect to Profibus DP

CA26R

$725.00

See Page 4

Suggested Displays*

Description

Part Number

Price

Reference (for details)

AV38 Local Display/Controller Same with added features & 24 VDC power

One 4-20mA output, PID. 24VDC. Two 4-20mA outs, PID, 2 Relays, Modbus Host Comms, 24VDC.

AV38BB0A1 AV38CB4C1

Suggested DataStick Components*

Description

Part Number

Universal Sensor Body Same in CPVC material

316 Stainless Steel 1-inch sensor body CPVC 1-inch sensor body

Communications Adapter

* Tables above show selected DataStick and AV38 configurations. See referenced pages for options.

22

Thermo Scientific AquaSensors

$260.00 $468.00

See Page 5


Thermo Scientific AquaSensors

Mounting Hardware

Description

Part Number

Price

1.5” Union Mount Assembly

Tee with locking collar, 316 Stainless Steel Tee with locking collar, CPVC

MH1041-COND MH1042-COND

$345.00 $211.00

1.0” Tee

Schedule 40, Stainless Steel Schedule 80, CPVC

MH3011 MH3022

$129.00 $77.00

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount

MH1242

$376.00

1.5” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1112 MH1111 MH1122 MH1121

$479.00 $891.00 $582.00 $1199.00

Tri-Clamp Tee Assembly

2” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1261

$304.00

Flow Chamber

Flow Chamber with mounting plate w/Kynar fittings Flow Chamber with mounting plate w/SS fittings

FC001-COND FC002-COND

$458.00 $458.00

Notes: See end of conductivity section for calibration solutions and accessories.

Refer to data sheet for mounting hardware configuration details.

2012 Product Pricing Guide

23


Product Pricing Guide 2012

AnalogPlus Contacting Conductivity Sensor – 1.0 Inch Body Model Number

Base Price $280.00

SC C  ontacting Conductivity Sensor in 1-inch body. Cable connects to any AV88 Universal Analyzer, TSCONCTP2000W Analyzer or most compatible conductivity analyzers. Integral temperature measurement and compensation. Standard 1-inch NPT mounting. Options for Tri-clamp and ball valve mounting.

Body Material

Price Adder ----$60.00

2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, High Temperature)

Measurement Electrode

Price Adder ----$50.00

1 Titanium (Standard) 2 316 Stainless Steel

Sensor Tip A 0.1 Cell Constant (500 µS/cm Range. PEEK Material Recommended) B 1.0 Cell Constant (5000 µS/cm Range) C 0.01 Cell Constant (Resistivity to 50 µS/cm Range. PEEK Material Required)

Price Adder --------$145.00

Reserved Category

-----

Cable Length

Price Adder ----$25.00 $50.00

10 10 Feet 20 20 Feet 30 30 Feet

SC

AnalogPlus Contacting Conductivity Part Number

1

Part Number Suffixes for Special Body Construction -IN15 -S20 -S25

24

Thermo Scientific AquaSensors

1.5-inch Ball Valve Insertion Mount (No front threads) Sanitary Style 2.0” Tri-clamp Sanitary Style 2.5” Tri-clamp

Price Adder $60.00 $125.00 $195.00


Thermo Scientific AquaSensors

Price

Reference (for details)

Suggested Analyzers*

Description

Part Number

AV88 Universal Analyzer Same with digital output option & 24 VDC power

2 outputs, 2 relays, PID. AC power. ¼ DIN. 2 outputs, PID, Modbus. 24VDC. ¼ DIN.

AV88BB0C2 AV88BB4A1

$807.00 $750.00

See Page 6

Alpha 2000W Conductivity Analyzer

2 outputs, 3 relays. AC power. ½ DIN.

TSCONCTP2000W

$899.00

See Page 7

Mounting Hardware

Description

Part Number

Price

1.5” Union Mount Assembly

Tee with locking collar, 316 Stainless Steel Tee with locking collar, CPVC

MH3041-COND MH3042-COND

$345.00 $211.00

1.0” Tee

Schedule 40, Stainless Steel Schedule 80, CPVC

MH3011 MH3022

$129.00 $77.00

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount

MH1242

$376.00

1.5” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1112 MH1111 MH1122 MH1121

$479.00 $891.00 $582.00 $1199.00

Tri-Clamp Tee Assembly

2” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1261

$304.00

Flow Chamber

Flow Chamber with mounting plate w/Kynar fittings Flow Chamber with mounting plate w/SS fittings

FC001-COND FC002-COND

$458.00 $458.00

Junction Box Extension Cable

For extension cables. Terminal strip included. AnalogPlus extension cable.

JBOXX01 APECxx; xx=ft

$41.00 $3.75/ft

* Table above shows selected analyzer configurations. See referenced pages for options. Notes: See end of conductivity section for calibration solutions and accessories.

Refer to data sheet for mounting hardware configuration details.

2012 Product Pricing Guide

25


Product Pricing Guide 2012

AnalogPlus Contacting Conductivity Sensor – Compression Fitting Style Model Number

Base Price $365.00

KC Contacting Conductivity Sensor in compression style body. Titanium electrodes, PEEK insulator. Integral temperature measurement and compensation. Connects to any AV88 Universal Analyzer, Alpha 2000W Analyzer or compatible conductivity analyzer. Includes compression fitting.

Compression Fitting 1 2 3 4

Price Adder ----$95.00 ----$75.00

¾ Inch Kynar compression fitting (0.1 and 1.0 Cells only) ¾ Inch 316 Stainless Steel compression fitting (0.1 and 1.0 Cells only) ½ Inch Kynar compression fitting (0.05 Cell only) ½ Inch 316 Stainless Steel compression fitting (0.05 Cell only))

Reserved Category

-----

Sensor Tip

Price Adder -------------

A 0.1 Cell Constant (500 µS/cm Range). ¾ Inch Compression. B 1.0 Cell Constant (5000 µS/cm Range) ¾ Inch Compression. E 0.05 Cell Constant (Resistivity to 100 µS/cm Range) ½ Inch Compression.

Reserved Category

-----

Cable Length

Price Adder ----$25.00 $50.00

10 10 Feet 20 20 Feet 30 30 Feet

KC

1

AnalogPlus Contacting Conductivity Part Number

Suggested Analyzers*

Description

Part Number

AV88 Universal Analyzer Same with digital output option & 24 VDC power

2 outputs, 2 relays, PID. AC power. ¼ DIN. 2 outputs, PID, Modbus. 24VDC. ¼ DIN.

AV88CB0C2 AV88CB4A1

Alpha 2000W Conductivity Analyzer

2 outputs, 3 relays. AC power. ½ DIN.

TSCONCTP2000W

$899.00

See Page 6 See Page 7

Description

Part Number

3/4” Compression Fittings

316 Stainless Steel (Spare/replacement) PVDF/Kynar® (Spare/replacement)

CF02 CF01

$134.00 $46.00

1/2” Compression Fittings

316 Stainless Steel (Spare/replacement) PVDF/Kynar® (Spare/replacement)

CF04 CF03

$98.00 $36.00

Junction Box Extension Cable

For extension cables. Terminal strip included. AnalogPlus extension cable.

JBOXX01 APECxx; xx=ft

Notes: Refer to data sheet for mounting hardware configuration details.

26

$807.00 $750.00

Reference (for details)

Mounting Hardware

* Table above shows selected analyzer configurations. See referenced pages for options.

Price

Also compatible with Orion 2100 Series Analyzer. Consult factory for details.

Thermo Scientific AquaSensors

Price

$41.00 $3.75/ft


Thermo Scientific AquaSensors

AnalogPlus Contacting Conductivity Sensor – Boiler and Sanitary Styles Model Number

Base Price $525.00

BC C  ontacting Conductivity Sensor in 3/4-inch boiler and sanitary style bodies. 316 Stainless Steel Electrodes with 3A finish for sanitary body types. Cable connects to any AV88 Universal Analyzer, Alpha 2000W Analyzer or most compatible conductivity analyzers. Integral temperature measurement and compensation.

Body Type

Price Adder ----$40.00 $50.00

1 ¾ Inch NPT Thread (Boiler Cell) 2 1.5” Inch Tri-clamp (1.5” flange for K0.05 only) 3 2.0 Inch Tri-clamp (2.0” flange for K0.1 and K1.0 only)

Reserved Category

-----

Cell Constant

Price Adder -------------

A 0.1 Cell Constant (500 µS/cm Range) B 1.0 Cell Constant (5000 µS/cm Range) E 0.05 Cell Constant (Resistivity to 100 µS/cm Range)

Reserved Category

-----

Cable Length

Price Adder ----$25.00 $50.00

10 10 Feet 20 20 Feet 30 30 Feet

BC

2

1

AnalogPlus Contacting Conductivity Part Number

Price

Reference (for details)

Suggested Analyzers*

Description

Part Number

AV88 Universal Analyzer Same with digital output option & 24 VDC power

2 outputs, 2 relays, PID. AC power. ¼ DIN. 2 outputs, PID, Modbus. 24VDC. ¼ DIN.

AV88CB0C2 AV88CB4A1

$807.00 $750.00

See Page 6

Alpha 2000W Conductivity Analyzer

2 outputs, 3 relays. AC power. ½ DIN.

TSCONCTP2000W

$899.00

See Page 7

Mounting Hardware

Description

Part Number

Tri-Clamp Tee Assembly

1.5” Tri-Clamp tee, gasket and clamp, Stainless Steel 2.0” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1281 MH1261

$252.00 $304.00

Price

Junction Box Extension Cable

For extension cables. Terminal strip included. AnalogPlus extension cable.

JBOXX01 APECxx; xx=ft

$41.00 $3.75/ft

* Table above shows selected analyzer configurations. See referenced pages for options. Notes: Refer to data sheet for mounting hardware configuration details.

Also compatible with Orion 2100 Series Analyzer. Consult factory for details.

2012 Product Pricing Guide

27


Product Pricing Guide 2012

AnalogPlus Contacting Conductivity Sensor - Boiler and Sanitary Styles continued

Conductivity Calibration Solutions Product Solutions 1000uS/cm Solution 2000uS/cm Solution 5000uS/cm Solution

28

Description

Part Number

Price

1000 µS/cm Conductivity Calibration Solution, 500ml bottle 2000 µS/cm Conductivity Calibration Solution, 500ml bottle 5000 µS/cm Conductivity Calibration Solution, 500ml bottle

SOL1000 SOL2000 SOL5000

$35.00 $35.00 $35.00

Thermo Scientific AquaSensors


Thermo Scientific AquaSensors

Thermo Scientific Toroidal Conductivity Measurement DataStick™ Toroidal Conductivity Sensor Head Model Number

Base Price $395.00

TC T oroidal Conductivity Sensor Head plugs into any DataStick sensor body and provides factory-calibrated measurement. Integral temperature measurement and compensation.

Body Material

Price Adder ----$130.00

2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, High Temperature)

TC

DataStick Toroidal Conductivity Sensor Head Part Number

Price

Reference (for details)

DS11-WA DS21-WA

$785.00 $690.00

See Page 1

CPVC Modbus RTU with 10 foot cable

CA22B1A

$205.00

See Page 2

Profibus to DataStick Adapter

Modbus RTU DataSticks connect to Profibus DP

CA26R

$725.00

See Page 4

Suggested Displays*

Description

Part Number

Price

Reference (for details)

AV38 Local Display/Controller Same with added features & 24 VDC power

One 4-20mA output, PID. 24VDC. Two 4-20mA outs, PID, 2 Relays, Modbus Host Comms, 24VDC.

AV38BB0A1 AV38CB4C1

$260.00 $468.00

See Page 5

Suggested DataStick Components*

Description

Part Number

Universal Sensor Body Same in CPVC material

316 Stainless Steel 1-inch sensor body CPVC 1-inch sensor body

Communications Adapter

Mounting Hardware

Description

Part Number

2” Union Mount Assembly

Stainless Steel CPVC

MH1031 MH2042

$541.00 $273.00

Price

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount

MH1242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount and inflatable float

MH1252

$479.00

2” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1172 MH1171 MH1182 MH1181

$510.00 $1231.00 $716.00 $1540.00

2” Tri-Clamp Tee Assembly

2.5” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1271

$304.00

Junction Box Extension Cable

For extension cables. Terminal strip included. DataStick extension cable.

JBOXX01 DPECxx; xx=ft

$41.00 $3.50/ft

* Table above shows selected DataStick and AV38 components. See referenced pages for options. Notes: See end of Conductivity section for calibration solutions.

Refer to data sheet for mounting hardware configuration details.

2012 Product Pricing Guide

29


Product Pricing Guide 2012

AnalogPlus Toroidal Conductivity Sensor Model Number

Base Price $495.00

ST Toroidal Conductivity Sensor. Cable connects to any AV88 Universal Analyzer and some other conductivity analyzers. 3/4 inch NPT and sanitary mounting. Integral temperature measurement and compensation.

Body Material

Price Adder ----$130.00

2 CPVC (Low Cost, All-Purpose) 3 PEEK (Food Grade, High Temperature)

Cable Length

Price Adder ----$25.00 $50.00

10 10 Feet 20 20 Feet 30 30 Feet

Mounting Options

Price Adder $225.00 -----

B 2-Inch Sanitary Flange (316 Stainless Steel with PEEK sensor head) C 3/4-Inch NPT

ST

AnalogPlus Toroidal Conductivity Sensor Part Number

Suggested Analyzers*

Description

Part Number

AV88 Universal Analyzer Same with digital output option & 24 VDC power

2 outputs, 2 relays, PID. AC power. ¼ DIN. 2 outputs, PID, Modbus. 24VDC. ¼ DIN.

AV88EB0C2 AV88EB4A1

See Page 6

Description

Part Number

2” Union Mount Assembly

Stainless Steel CPVC

MH3031-T MH3032-T

$541.00 $273.00

Immersion Assembly

7 ft PVC extension with junction box – ¾” Sensors

MH3083-T

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – ¾” Sensors with swivel hand rail mount

MH1242-T

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – ¾” Sensors with swivel hand rail mount and inflatable float

MH1252-T

$479.00

2” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1172-T MH1171-T MH1182-T MH1181-T

$510.00 $1231.00 $716.00 $1540.00

2” Tri-Clamp Assembly

2” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1261-T

$304.00

Junction Box Extension Cable

For extension cables. Terminal strip included. AnalogPlus extension cable.

JBOXX01 APECxx; xx=ft

$41.00 $3.75/ft

Notes: See end of Conductivity section for calibration solutions.

30

$807.00 $750.00

Reference (for details)

Mounting Hardware

* Table above shows selected analyzer configurations. See referenced pages for options.

Price

Refer to data sheet for mounting hardware configuration details.

Thermo Scientific AquaSensors

Price


Thermo Scientific AquaSensors

Conductivity Calibration Solutions Product Solutions 1000 uS/cm Solution 2000 uS/cm Solution 5000 uS/cm Solution

Description

Part Number

Price

1000 µS/cm Conductivity Calibration Solution, 500ml bottle 2000 µS/cm Conductivity Calibration Solution, 500ml bottle 5000 µS/cm Conductivity Calibration Solution, 500ml bottle

SOL1000 SOL2000 SOL5000

$35.00 $35.00 $35.00

2012 Product Pricing Guide

31


Product Pricing Guide 2012

Thermo Scientific Dissolved Oxygen Measurement RDO速 Pro Optical Dissolved Oxygen System Model Number

Base Price $1545.00

RD5 R  DO Pro Luminescent Dissolved Oxygen (DO) Sensor. 0 to 20.0 ppm, 0 to 200% saturation range. Delrin sensor body and polystyrene sensor cap. Robust process design. Temperature measurement included. Precalibrated.

Reserved Category

-----

Sensor Communications

Price Adder -----

4 M  odbus RTU over RS-485 (Compatible with AV38 Local Display).

Sensor Cable Length

Price Adder -----

3 3 0 Feet (~10 meters)

RD5

A

4

3

RDO Pro Optical DO Sensor Part Number

Suggested Local Displays*

Description

Part Number

AV38 Local Display/Controller Same with added features for dual input applications

One 4-20mA output, 24VDC. Two 4-20mA outs, PID, 2 Alarm/Control/Wash Relays, 100-240VAC power.

AV38BB0A1 AV38CB0C2

Interface Components

Description

Part Number

RDO Pro & DataStick to Profibus Adapter

Modbus RTU Sensors connect to Profibus DP

CA26R

Price $260.00 $463.00

Thermo Scientific AquaSensors

See Page 5

Price

Reference (for details)

$725.00

See Page 4

* Table above shows suggested AV38 Local Display/Controller components. See referenced pages for optional configurations.

32

Reference (for details)


Thermo Scientific AquaSensors

Mounting Hardware

Description

Part Number

2” Union Mount Assembly

2” Union Tee with locking collar, CPVC

MH1032-RD

$309.00

Price

Immersion Assembly

7 ft PVC extension with junction box – RDO Sensors

MH3083-RD

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – RDO Sensors with swivel hand rail mount

MH1242-RD

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – RDO Sensors with swivel hand rail mount and inflatable float

MH1252-RD

$479.00

Ball Float Platform

Float Platform for up to 4 RDO Sensors or DataSticks.

MHFB02-RD

$582.00

Wash Hardware

Attach air/water purge block to sensor body. Works with customer supplied compressor & AV38 wash relay or PLC.

MH1222-RD

$258.00

Wash Hardware

Attach air purge block to sensor body. Includes air compressor; works with AV38 wash relay or PLC.

MH5222-RD

$819.00

2” Ball Valve Assembly

Low Pressure, 316 Stainless Steel

MH1171-RD

$1231.00

Junction Box Extension Cable

For extension cables. Terminal strip included. DataStick/RDO Pro extension cable.

JBOXX01 DSECxx; xx=ft

$41.00 $3.50/ft

Notes: Modbus RTU communications required for connection to AV38 Local Display/Controller.

AquaSensors RDO Pro Sensor Body carries a 3-year warranty. Sensor caps carry a 2-year warranty.

RDO Pro Sensor Accessories Product

Description

Part Number

Sensor Cap

Replacement RDO Pro Optical DO Sensing Cap; includes O-rings and silicone grease (Replaced annually)

RDC1

Nose Cone

Replacement RDO Pro Sensor Nose Cone

RDN1

$99.00

O-ring Kit

Replacement RDO Pro Sensor O-ring Kit

RDG1

$59.00

Calibration Kit

Calibration & storage chamber, Calibration cap, Storage cap and Sodium sulfite solution

RDK1

2012 Product Pricing Guide

Price $139.00

$129.00

33


Product Pricing Guide 2012

DataStick Dissolved Oxygen Sensor Head (ppm) Model Number DO31 D  issolved Oxygen (ppm) Sensor Head plugs into any DataStick sensor body and provides factory-calibrated measurement. Integral temperature measurement and compensation. Replaceable membrane cap. PEEK Body.

Sensor Tip Options

Price Adder ----$30.00 $40.00

A Protected membrane (Standard) B Process Flat (without face seal) C Face Seal (for flow chamber mounting)

Reserved Category

-----

Membrane Options

Price Adder ----$40.00

A FEP Teflon (Standard) B Membrane w/SS mask to protect membrane from particulates and pressure

DO31

1

DataStick ppm DO Sensor Head Part Number

Price

Reference (for details)

DS11-WA DS21-WA

$785.00 $690.00

See Page 1

CPVC Modbus RTU with 10 foot cable

CA22B1A

$205.00

See Page 2

Profibus to DataStick Adapter

Modbus RTU DataSticks connect to Profibus DP

CA26R

$725.00

See Page 4

Suggested Local Displays*

Description

Part Number

Price

Reference (for details)

AV38 Local Display/Controller Same with added features for dual input applications

One 4-20mA output, 24VDC. Two 4-20mA outputs, 2 Alarm/Control/Wash Relays, 100-240VAC power.

AV38BB0A1 AV38CB0C2

Suggested DataStick Components*

Description

Part Number

Universal Sensor Body Same in CPVC material

316 Stainless Steel 1-inch sensor body CPVC 1-inch sensor body

Communications Adapter

* Tables above show selected DataStick and AV38 configurations. See referenced pages for options.

34

Base Price $415.00

Thermo Scientific AquaSensors

$260.00 $463.00

See Page 5


Thermo Scientific AquaSensors

Mounting Hardware

Description

Part Number

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Price

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount

MH1242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount and inflatable float

MH1252

$479.00

Flow Chamber (requires Face Seal sensor tip)

Flow Chamber with mounting plate w/Kynar fittings. Flow Chamber with mounting plate w/SS fittings.

FC001 FC002

$458.00 $458.00

Ball Float Platform

Float Platform for up to 4 DataSticks.

MHFB02

$582.00

Wash Hardware

Attach air/water purge block to DataStick body. Works with customer supplied compressor & AV38 wash relay or PLC.

MH1132

$258.00

Wash Hardware

Attach air purge block to DataStick body. Includes air compressor; works with AV38 wash relay or PLC.

MH5132

$819.00

Junction Box Extension Cable

For extension cables. Terminal strip included. DataStick extension cable.

JBOXX01 DSECxx; xx=ft

$41.00 $3.50/ft

Note : See end of Dissolved Oxygen section for electrolyte and replacement membrane kits.

Refer to data sheet for mounting hardware configuration details.

2012 Product Pricing Guide

35


Product Pricing Guide 2012

AnalogPlus Dissolved Oxygen Sensor (ppm) Model Number

Base Price $615.00

SD Dissolved Oxygen (ppm) Sensor in 1-inch PEEK body. Cable connects to any AV88 Universal Analyzer. NPT mounting. Integral temperature measurement and compensation. Replaceable membrane cap.

Reserved Category

-----

Reserved Category

-----

Sensor Tip Options

Price Adder ----$30.00 $40.00

A Protected membrane (Standard) B Process Flat (without face seal) C Face seal for flow chamber mounting

Reserved Category

-----

Membrane Options A FEP Teflon (Standard) B Membrane w/SS mask to protect membrane from particulates

Cable Length

Price Adder ----$25.00 $50.00

10 10 Feet 20 20 Feet 30 30 Feet

SD

3

1

AnalogPlus DO Sensor Part Number

1

Part Number Suffixes for Special Body Construction -IN15 -S20

36

Thermo Scientific AquaSensors

Price Adder ----$40.00

1.5-inch Ball Valve Insertion Mount (No front threads) Sanitary Style 2.0� Tri-clamp

Price Adder $60.00 $125.00


Thermo Scientific AquaSensors

Suggested Analyzers*

Description

Part Number

AV88 Universal Analyzer Same with digital output option & 24 VDC power

2 outputs, 2 relays, PID. AC power. ¼ DIN. 2 outputs, PID, Modbus. 24VDC. ¼ DIN.

AV88FB0C2 AV88FB4A1

Price $902.00 $845.00

Reference (for details) See Page 6

Mounting Hardware

Description

Part Number

Price

1.5” Union Mount

Stainless Steel CPVC

MH3041 MH3042

$345.00 $211.00

1” Tee

Schedule 40, Stanless Steel Schedule 80, CPVC

MH3011 MH3022

$129.00 $77.00

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount

MH1242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1” Sensors with swivel hand rail mount and inflatable float.

MH1252

$479.00

1.5” Ball Valve Assembly

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1112 MH1111 MH1122 MH1121

$479.00 $891.00 $582.00 $1199.00

2” Tri-Clamp Tee Assembly

2” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1261

$304.00

Wash Hardware

Attach air/water purge block to sensor body. Works with customer supplied compressor & AV38 wash relay.

MH1132

$258.00

Wash Hardware

Attach air purge block to sensor body. Includes air compressor; works with AV38 wash relay or PLC.

MH5132

$819.00

Junction Box Extension Cable

For extension cables. Terminal strip included. AnalogPlus extension cable.

JBOXX01 APECxx; xx=ft

$41.00 $3.75/ft

* Table above shows selected analyzer configurations. See referenced pages for options. Notes: See end of Dissolved Oxygen section for electrolyte and replacement membrane kits.

Refer to data sheet for mounting hardware configuration details.

2012 Product Pricing Guide

37


Product Pricing Guide 2012

AquaTrace™ ppb Dissolved Oxygen Measurement System Model Number AQD Trace Dissolved Oxygen measurement (ppb) system using the pre-calibrated ppb DO PEEK sensor head with Stainless Steel DataStick sensor body, Modbus communications, low flow chamber with 316SS fittings, mounting plate and local display/controller.

Display Configuration

Price Adder ----$25.00

1 Integral 2 Remote with 20 foot cable

AV38 Display Configuration

Price Adder $250.00 $350.00 $450.00

A User Interface with 1 current output. 24 VDC power. B User Interface with 2 current outputs, 2 relays. 24 VDC power. C User Interface with 2 current outputs, 2 relays. 100 VAC to 240 VAC power.

AV38 Host Communications Option 0 4 5 6 7

Price Adder ----$105.00 $150.00 $180.00 $250.00

None Modbus RTU (24 VDC and RS485 terminal connections in AV38) DeviceNet (24 VDC and DeviceNet terminal connections in AV38) CANopen (24 VDC and DeviceNet terminal connections in AV38) EtherNet/IP and Modbus/TCP (PoE RJ45 Connector in AV38)

AQD

Base Price $2400.00

ppb DO Measurement System Part Number

Recommended AquaTrace™ Systems Typical Systems*

Part Number

Total Price

Chamber w/integral mount AV38. 1 output. Stainless Steel DataStick. 24VDC.

AQD1A0

$2650.00

Chamber w/integral mount AV38. 2 outputs/2 relays. Stainless Steel. 100 VAC to 240 VAC

AQD1C0

$2850.00

* Other Trace DO configurations are possible by ordering DataStick components a la carte. Refer to the appropriate order matrix pages for sensor head, AV38 display, DataStick Universal sensor body, and communications adapter.

38

Thermo Scientific AquaSensors


Thermo Scientific AquaSensors

Dissolved Oxygen Electrolyte and Accessories Product

Description

Part Number

Dissolved Oxygen (ppb) Sensor Head with Face Seal Tip

TDO31B2A

Electrolyte in the PPM range – 60ml bottle Electrolyte in the PPB range – 60ml bottle

RDOK1 RDOK3

Protected cap with pre-stretched membrane Process Flat cap with pre-stretched membrane Flat cap / o-ring with pre-stretched membrane Protected cap with pre-stretched membrane and protective mask. Process Flat cap with pre-stretched membrane and protective mask. Flat cap / o-ring with pre-stretched membrane and protective mask.

DMR03 DMR08 DMR04 DMR03M DMR08M DMR04M

Protected Cap Flat Cap Face Seal Cap

Protected cap with pre-stretched membrane Process Flat cap with pre-stretched membrane Flat cap / o-ring

DMR13 DMR18 DMR14

$55.00 $85.00 $95.00

Storage cover

To keep stored membrane wet when stored.

SBC01

$6.00

AquaTrace Sensor Head ppb Sensor

Solutions ppm Electrolyte ppb Electrolyte

Membrane Caps (ppm) Protected Cap Flat Cap Face Seal Cap Protected Cap & mask Flat Cap & mask Face Seal Cap & mask

Membrane Caps (ppb)

2012 Product Pricing Guide

Price $615.00

$20.00 $25.00

$50.00 $80.00 $90.00 $80.00 $110.00 $120.00

39


Product Pricing Guide 2012

Thermo Scientific Dissolved Ozone Measurement DataStick Dissolved Ozone Sensor Head Model Number

Base Price $545.00

OZ31 O  zone Sensor Head plugs into any DataStick® sensor body and provides factory-calibrated measurement. Integral temperature. Replaceable Membrane Cap. PEEK material.

Sensor Tip Options

Price Adder ----$20.00

B Process Flat (Standard) C Face Seal (for flow chamber mounting)

OZ31

DataStick Ozone Sensor Head Part Number

Suggested DataStick Components*

Description

Part Number

Universal Sensor Body Same in PEEK material

316 Stainless Steel 1-inch sensor body PEEK 1-inch sensor body

Communications Adapter

Price

Reference (for details)

DS11-WA DS31-WA

$785.00 $800.00

See Page 1

316 Stainless Steel Modbus RTU with 10 ft cable

CA12B1A

$255.00

See Page 2

Profibus to DataStick Adapter

Modbus RTU DataSticks connect to Profibus DP

CA26R

$725.00

See Page 4

Suggested Local Displays*

Description

Part Number

Price

Reference (for details)

AV38 Local Display/Controller Same with added features for dual input applications

One 4-20mA output, 24VDC. Two 4-20mA outs, PID, 2 Alarm/Control/Wash Relays, 100-240VAC power.

AV38BB0A1 AV38CB0C2

Description

Part Number

1.5” Union Mount

Stainless Steel

MH1041

$345.00

1” Tee

Schedule 40, Stanless Steel

MH3011

$129.00

1.5” Ball Valve

Low Pressure, Stainless Steel High Pressure, Stainless Steel

MH1111 MH1121

$891.00 $1199.00

2” Tri-Clamp Tee Assembly

2” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1261

$304.00

Flow Chamber Assembly (requires Face Seal sensor tip)

Flow Chamber with mounting plate w/Kynar fittings. Flow Chamber with mounting plate w/SS fittings.

FC001 FC002

$458.00 $458.00

Junction Box Extension Cable

For extension cables. Terminal strip included. DataStick extension cable.

JBOXX01 DSECxx; xx=ft

$41.00 $3.50/ft

Notes: See end of ozone section for electrolyte solutions and membrane kits.

40

See Page 5

Mounting Hardware

* Tables above shows selected DataStick and AV38 configurations. See referenced pages for options.

$260.00 $463.00

Refer to data sheet for mounting hardware configuration details.

Thermo Scientific AquaSensors

Price


Thermo Scientific AquaSensors

AquaZone™ Dissolved Ozone Measurement System Model Number

Base Price $1995.00

AQZ Ozone measurement system using a precalibrated ozone sensor head with Face Seal tip, DataStick body, low flow chamber, mounting plate and local display/controller.

Display Configuration

Price Adder ----$25.00

1 Integral 2 Remote with 20 foot cable

AV38 Display Configuration

Price Adder $250.00 $350.00 $450.00

A User Interface with 1 current output. 24 VDC power. B User Interface with 2 current outputs, 2 relays. 24 VDC power. C User Interface with 2 current outputs, 2 relays. 100 VAC to 240 VAC power.

AV38 Host Communications Option 0 4 5 6 7

Price Adder ----$105.00 $150.00 $180.00 $250.00

None Modbus RTU (24 VDC and RS485 terminal connections in AV38) DeviceNet (24 VDC and DeviceNet terminal connections in AV38) CANopen (24 VDC and DeviceNet terminal connections in AV38) EtherNet/IP and Modbus/TCP (PoE RJ45 Connector in AV38)

AQZ

Ozone Measurement System Part Number

Recommended AquaZone™ Systems Typical Systems*

Part Number

Total Price

Chamber w/integral mount AV38. 1 output. DataStick. 24VDC.

AQZ1A0

$2245.00

Chamber w/integral mount AV38. 2 outputs/2 relays. DataStick. 100 VAC to 240 VAC

AQZ1C0

$2445.00

* Other ozone configurations are possible by ordering DataStick components a la carte. Refer to the appropriate order matrix pages for sensor head, AV38 display, DataStick Universal sensor body, and communications adapter.

2012 Product Pricing Guide

41


Product Pricing Guide 2012

AnalogPlus™ Ozone Sensor Model Number

Base Price $675.00

SZ Ozone Sensor in 1-inch PEEK body. Cable connects to AV88 Universal Analyzer. NPT mounting. Integral temperature, replaceable membrane cap.

Reserved Category

-----

Reserved Category

-----

Sensor Tip Options

Price Adder ----$20.00

B Process Flat (Standard) C Face seal for flow chamber mounting

Reserved Category

-----

Reserved Category

-----

Cable Length

Price Adder ----$25.00 $50.00

10 10 Feet 20 20 Feet 30 30 Feet

SZ

3

1

1

AnalogPlus Ozone Sensor Part Number

A

Part Number Suffixes for Special Body Construction -IN15 -S20

1.5-inch Ball Valve Insertion Mount (No front threads) Sanitary Style 2.0” Tri-clamp

Suggested Analyzers*

Description

Part Number

AV88 Universal Analyzer Same with digital output option & 24 VDC power

2 outputs, 2 relays. AC power. ¼ DIN. 2 outputs, Modbus RTU, 24VDC. ¼ DIN.

AV88GB0C2 AV88GB4A1

* Table above shows selected analyzer configurations. See referenced page for options.

42

Thermo Scientific AquaSensors

Price $880.00 $825.00

Price Adder $60.00 $125.00

Reference (for details) See Page 6


Thermo Scientific AquaSensors

Mounting Hardware

Description

Part Number

Price

1.5” Union Mount

Stainless Steel

MH3041

$345.00

1” Tee

Schedule 40, Stanless Steel Schedule 80, CPVC

MH3011 MH3022

$129.00 $77.00

1.5” Ball Valve

Low Pressure, Stainless Steel High Pressure, Stainless Steel

MH1111 MH1121

$891.00 $1199.00

2” Tri-Clamp Assembly

2” Tri-Clamp tee, gasket and clamp, Stainless Steel

MH1261

$304.00

Flow Chamber Assembly (requires Face Seal sensor tip)

Flow Chamber with mounting plate w/Kynar fittings. Flow Chamber with mounting plate w/SS fittings.

FC001 FC002

$458.00 $458.00

Junction Box Extension Cable

For extension cables. Terminal strip included. AnalogPlus extension cable.

JBOXX01 APECxx; xx=ft

$41.00 $3.75/ft

Note: Refer to data sheet for mounting hardware configuration details.

Ozone Electrolyte and Accessories Product

Description

Part Number

Price

Ozone Electrolyte

Electrolyte in the PPM range – 60ml bottle

RDOK2

$25.00

Membrane Cap Flat Membrane Cap Face Seal

Process Flat for Ozone Flat cap for o-ring with pre-stretched membrane

DMR08-Z DMR04-Z

$55.00 $60.00

Protective Cap

To keep stored membrane wet when stored.

SBC01

2012 Product Pricing Guide

$6.00

43


Product Pricing Guide 2012

Thermo Scientific Chlorine Measurement AquaChlor™ Free Chlorine Measurement System Model Number AQC F ree Chlorine measurement system (0 to 10 ppm range); includes chlorine sensor head (Noryl material) with integral temperature and CPVC DataStick electronics, low flow sample chamber, mounting plate and AV38 local display/controller. Optional automatic pH compensation with pH DataStick sensor.

Display Configuration

Price Adder ----$25.00

1 Integral mount. 2 Remote mount with 20 foot cable.

AV38 Display Configuration

Price Adder $250.00 $350.00 $450.00

A User Interface with 1 current output. 24 VDC power. B User Interface with 2 current outputs, 2 relays. 24 VDC power. C User Interface with 2 current outputs, 2 relays. 100 VAC to 240 VAC power.

AV38 Host Communication Option 0 4 5 6 7

Price Adder ----$105.00 $150.00 $180.00 $250.00

None Modbus RTU (24 VDC and RS485 terminal connections in AV38) DeviceNet (24 VDC and DeviceNet terminal connections in AV38) CANopen (24 VDC and DeviceNet terminal connections in AV38) EtherNet/IP and Modbus/TCP (PoE RJ45 Connector in AV38)

pH Compensation

Price Adder ----$995.00

A Manual B Automatic (with active pH sensor)

AQC

Base Price $1895.00

Free Chlorine Measurement System Part Number

Recommended AquaChlor Systems Typical System Configurations*

Part Number

AquaChlor System. Integral AV38 with 1 output, flow chamber, Manual pH. 24VDC.

AQC1A0A

$2145.00

AquaChlor System. Integral AV38 with 2 outputs, 2relays, flow chamber, Automatic pH. 90/240 VAC

AQC1C0B

$3340.00

* Table above shows selected DataStick and AV38 configurations. See referenced pages for options.

44

Thermo Scientific AquaSensors

Price


Thermo Scientific AquaSensors

AquaChlor Free Chlorine Accessories Product

Description

Part Number

Price

Chlorine Sensor Head

Free Chlorine Sensor Head plugs into any DataStick sensor body and provides factory-calibrated measurement. Integral temperature. Replaceable Membrane Cap. Noryl material. Range: 0 to 10 ppm.

CL31B1

$595.00

AquaChlor Flow Chamber

AquaChlor Constant Head, Low Flow Chamber on mounting plate.

FC004

$650.00

Chlorine Electrolyte

Electrolyte in the PPM range. – 60ml bottle

RDOK9

$25.00

Membrane Assembly

Chlorine Membrane Cap with pre-stretched membrane

DMR09

$60.00

Protective Cap

To keep stored membrane wet when stored.

SBC01

$6.00

Note: Refer to data sheet for mounting hardware configuration details.

2012 Product Pricing Guide

45


Product Pricing Guide 2012

Thermo Scientific Turbidity and Suspended Solids Measurement AquaClear™ Low Range Turbidity Measurement System with Local Display Model Number AQT D  rinking water turbidity measurement system. 0 to 200 NTU Range. Precalibrated sensor, temperature measurement, sample chamber with bubble trap, lamp, junction box, mounting plate and AV38 local display.

Display Configuration

Price Adder ----$25.00

1 Integral 2 Remote mount with 20 foot cable.

AV38 Display Configuration A B C D

User Interface with 1 current output. 24 VDC power. User Interface with 2 current outputs, 2 relays. 24 VDC power. User Interface with 1 current output. 100 VAC to 240 VAC power. User Interface with 2 current outputs, 2 relays. 100 VAC to 240 VAC power.

AV38 Host Communications Option 0 4 5 6 7

None Modbus RTU over RS-485 (24 VDC and RS485 terminal connections in AV38) DeviceNet (24 VDC and DeviceNet terminal connections in AV38) CANopen (24 VDC and DeviceNet terminal connections in AV38) EtherNet/IP and Modbus/TCP (PoE RJ45 Connector in AV38)

AQT

Base Price $1599.00

Price Adder $250.00 $350.00 $350.00 $450.00 Price Adder ----$105.00 $150.00 $180.00 $250.00

Turbidity Measurement System Part Number

AquaClear Low Range Turbidity System

– For Use Without Local Display or as Second Sensor Model Number AQT D  rinking water turbidity measurement system. 0 to 200 NTU Range. Precalibrated sensor, temperature measurement, sample chamber with bubble trap, lamp, junction box, mounting plate and a 20 foot network connection cable for interactive computer measurement, calibration, configuration and diagnostic.

Reserved Category

-----

Power Requirements

Price Adder ----$50.00

E 24 VDC Power F 100 to 240 VAC Power

Datastick Communications 4 5 6 7 8

AQT 46

Base Price $1365.00

Modbus RTU over RS-485. 20-foot cable to network. DeviceNet. 20-foot cable to network. CANopen. 20-foot cable to network. EtherNet/IP and Modbus/TCP. 20 ft cable to PoE Switch. RJ45 connection. USB communications for direct to PC interface. AquaComm software included.

3

Thermo Scientific AquaSensors

Turbidity Measurement System Part Number

Price Adder $225.00 $330.00 $365.00 $520.00 $235.00


Thermo Scientific AquaSensors

*Typical AquaClear System Configurations

Part Number

Price

Turbidimeter w/integral AV38 display. 1 output. 24VDC power.

AQT1A0

$1849.00

Turbidimeter w/integral AV38 display. 1 output. 100 VAC to 240 VAC power.

AQT1C0

$1949.00

Turbidity sensor without AV38 display. Direct Modbus RTU to Network or 2nd Input to AV38

AQT3E4

$1590.00

Note: See end of turbidity section for calibration solutions.

Replacement Hardware

Description

Part Number

Replacement Lamp Assembly

Bulb and cable assembly (Requires snap ring tool) Exchange of old lamp assembly with new lamp assembly Bulb preassembled into housing with cable

TDWLS00 TDWLS01 TDWLS02

$55.00 $75.00 $250.00

Sample Chamber Lid

Sample chamber lid without lamp

TDWCC01

$300.00

Turbidity Detector

Detector sensor head (does not include DataStick)

DW21

$350.00

Sample Chamber

Replacement sample chamber

TDWSC01

$600.00

Cal-Stick Verification Standard

For calibration verification

Junction Box Extension Cable

For extension cables. Terminal strip included. DataStick Extension cable

TDWCAL01 JBOXX01 DSECxx; xx=ft

2012 Product Pricing Guide

Price

$300.00 $41.00 $3.50/ft

47


Product Pricing Guide 2012

Wide Range DataStick™ Turbidity System Model Number

Base Price $1520.00

RT1 Wide Range Turbidity Measurement System. 0 to 4000 NTU Range. Polycarbonate sensor body. Fouling Correction Temperature measurement included. Precalibrated.

Back-Body and Comms Adapter Material

Price Adder ----$75.00

1 CPVC 1-Inch NPT 2 316 Stainless Steel 1-Inch NPT

DataStick Communications 4 5 6 7 8

Price Adder $205.00 $310.00 $345.00 $500.00 $235.00

Modbus RTU over RS-485. (Compatible with AV38 Local Display). DeviceNet CANopen EtherNet/IP and Modbus/TCP. Connect to PoE Switch with RJ45 connector. USB 10 foot cable with Series A connector for use with PC; includes AquaComm software.

Cable Length 1 2 3 4

Price Adder ----$20.00 $40.00 $60.00

10 Feet 20 Feet 30 Feet 40 Feet

RT1

Wide Range Turbidity Measurment System Part Number

Suggested Local Displays*

Description

Part Number

AV38 Local Display/Controller Same with added features for dual input applications

One 4-20mA output, 24VDC. Two 4-20mA outs, PID, 2 Alarm/Control/Wash Relays, 100-240VAC power.

AV38BB0A1 AV38CB0C2

Price $260.00 $463.00

Reference (for details) See Page 5

* Use a Modbus RTU communications adapter for connection to AV38 Local Display.

48

Interface Components

Description

Part Number

Profibus to DataStick Sensor Adapter

Modbus RTU sensors connect to Profibus DP

CA26R

Thermo Scientific AquaSensors

Price

Reference (for details)

$725.00

See Page 4


Thermo Scientific AquaSensors

Mounting Hardware

Description

Part Number

Price

1.5” Union Mount

Stainless Steel Union Tee CPVC Union Tee

MH1041-RT MH1042-RT

$345.00 $211.00

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors With swivel hand rail mount.

MH1242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1” Sensors With swivel hand rail mount and inflatable float.

MH1252

$479.00

1.5” Ball Valve

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1112 MH1111 MH1122 MH1121

$479.00 $891.00 $582.00 $1199.00

Ball Float Platform

PVC Float Platform for up to 4 DataSticks

MHFB02

$582.00

Wash Hardware

Attach air/water purge block to sensor body. Works with customers compressor & AV38/PLC wash relay

MH1222

$258.00

Wash Hardware

Attach air purge block to sensor body. Includes air compressor; works with AV38 wash relay or PLC.

MH5222

$819.00

Junction Box Extension Cable

For extension cables. Terminal strip included. DataStick Extension cable.

JBOXX01 DSECxx; xx=ft

$41.00 $3.50/ft

Note: DataStick Sensor Body is integrated into the sensor and is not needed as a separate line item.

Turbidity Calibration Solution

Description

Part Number

Price

Formazin Stock

4000 NTU Stock Solution, 475ml bottle

AC45FZ

$56.00

2012 Product Pricing Guide

49


Product Pricing Guide 2012

Suspended Solids DataStick Measurement System Model Number

Base Price $1920.00

RT2 Suspended Solids Measurement System. 0 to 20,000 mg/l Range. Polycarbonate sensor body. Fouling Correction. Temperature measurement included. Precalibrated.

Back-Body and Comms Adapter Material

Price Adder ----$75.00

1 CPVC 1-Inch NPT 2 316 Stainless Steel 1-Inch NPT

DataStick Communications 4 5 6 7 8

Price Adder $205.00 $310.00 $345.00 $500.00 $235.00

Modbus RTU over RS-485. (Compatible with AV38 Local Display). DeviceNet CANopen EtherNet/IP and Modbus/TCP. Connect to PoE Switch with RJ45 connector. USB 10 foot cable with Series A connector for use with PC; includes AquaComm software.

Cable Length 1 2 3 4

Price Adder ----$20.00 $40.00 $60.00

10 Feet 20 Feet 30 Feet 40 Feet

RT2

Suspended Solids Measurement System Part Number

Suggested Local Displays*

Description

Part Number

AV38 Local Display/Controller Same with added features for dual input applications

One 4-20mA output, 24VDC. Two 4-20mA outs, PID, 2 Alarm/Control/Wash Relays, 100-240VAC power.

AV38BB0A1 AV38CB0C2

Price $260.00 $463.00

Reference (for details) See Page 5

* Use a Modbus RTU communications adapter for connection to AV38 Local Display.

50

Interface Components

Description

Part Number

Profibus to DataStick Sensor Adapter

Modbus RTU sensors connect to Profibus DP

CA26R

Thermo Scientific AquaSensors

Price

Reference (for details)

$725.00

See Page 4


Thermo Scientific AquaSensors

Mounting Hardware

Description

Part Number

Price

1.5” Union Mount

Stainless Steel Union Tee CPVC Union Tee

MH1041-RT MH1042-RT

$345.00 $211.00

Immersion Assembly

7 ft PVC extension with junction box – 1” Sensors

MH3083

$170.00

Immersion Assembly w/Swivel Rail Mounting

7 ft PVC extension with junction box – 1” Sensors With swivel hand rail mount.

MH1242

$376.00

Immersion Assembly w/Swivel and Ball Float

7 ft PVC extension with junction box – 1” Sensors With swivel hand rail mount and inflatable float.

MH1252

$479.00

1.5” Ball Valve

Low Pressure, CPVC Low Pressure, Stainless Steel High Pressure, CPVC High Pressure, Stainless Steel

MH1112 MH1111 MH1122 MH1121

$479.00 $891.00 $582.00 $1199.00

Ball Float Platform

PVC Float Platform for up to 4 DataSticks

MHFB02

$582.00

Wash Hardware

Attach air/water purge block to sensor body. Works with customers compressor & AV38/PLC wash relay

MH1222

$250.00

Wash Hardware

Attach air purge block to sensor body. Includes air compressor; works with AV38 wash relay or PLC.

MH5222

$795.00

Junction Box Extension Cable

For extension cables. Terminal strip included. DataStick Extension cable.

JBOXX01 DSECxx; xx=ft

$41.00 $3.50/ft

Note: DataStick Sensor Body is integrated into the sensor and is not needed as a separate line item.

2012 Product Pricing Guide

51


Product Pricing Guide 2012

Thermo Scientific Terms and Conditions of Sale THERMO ORION INC. TERMS AND CONDITIONS OF SALE UNLESS OTHERWISE EXPRESSLY AGREED IN WRITING, ALL SALES ARE SUBJECT TO THE FOLLOWING TERMS AND CONDITIONS: 1. GENERAL. Thermo Orion Inc. (“Seller”) hereby offers for sale to the buyer named on the face hereof (“Buyer”) the products listed on the face hereof (the “Products”) on the express condition that Buyer agrees to accept and be bound by the terms and conditions set forth herein. Any provisions contained in any document issued by Buyer are expressly rejected and if the terms and conditions in this Agreement differ from the terms of Buyer’s offer, this document shall be construed as a counter offer and shall not be effective as an acceptance of Buyer’s document. Buyer’s receipt of Products or Seller’s commencement of the services provided hereunder will constitute Buyer’s acceptance of this Agreement. This is the complete and exclusive statement of the contract between Seller and Buyer with respect to Buyer’s purchase of the Products. No waiver, consent, modification, amendment or change of the terms contained herein shall be binding unless in writing and signed by Seller and Buyer. Seller’s failure to object to terms contained in any subsequent communication from Buyer will not be a waiver or modification of the terms set forth herein. All orders are subject to acceptance in writing by an authorized representative of Seller. 2. MINIMUM ORDER REQUIREMENTS. The minimum order requirement for dealers is $225 for Buyer’s products. The minimum order requirement for customers is $40. An “order” is considered to be a purchase order for products to be shipped to a single location. International minimum order requirements may vary. Contact your International Customer Service Specialist for details. 3. PRICE. All prices published by Seller or quoted by Seller’s representatives may be changed at any time without notice. All prices quoted by Seller or Seller’s representatives are valid for thirty (30) days, unless otherwise stated in writing. All prices for the Products will be as specified by Seller or, if no price has been specified or quoted, will be Seller’s price in effect at the time of shipment. All prices are subject to adjustment on account of specifications, quantities, shipment arrangements or other terms or conditions which are not part of Seller’s original price quotation. 4. TAXES AND OTHER CHARGES. Prices for the Products exclude all federal, state, local property, license, privilege, sales, use, excise, gross receipt, sales, value added and other taxes and duties imposed with respect to the sale, delivery, or use of any Products covered hereby, all of which taxes and duties must by paid by Buyer. Such taxes are for the account of Buyer and Buyer agrees to pay or reimburse any such taxes which Seller, its affiliates, subsidiaries, contractors or suppliers are required to pay. If Buyer claims any exemption, Buyer must provide a valid, signed certificate or letter of exemption for each respective jurisdiction. 5. TERMS OF PAYMENT. Seller may invoice Buyer upon shipment for the price and all other charges payable by Buyer in accordance with the terms on the face hereof. If no payment terms are stated on the face hereof, payment shall be net thirty (30) days from the date of invoice. If Buyer fails to pay any amounts when due, Buyer shall pay Seller interest thereon at a periodic rate of one and one-half percent (1.5%) per month (or, if lower, the highest rate permitted by law), together with all costs and expenses (including without limitation reasonable attorneys’ fees and disbursements and court costs) incurred by Seller in collecting such overdue amounts or otherwise enforcing Seller’s rights hereunder. Seller reserves the right to require from Buyer full or partial payment in advance, or other security that is satisfactory to Seller, at any time that Seller believes in good faith that Buyer’s financial condition does not justify the terms of payment specified. All payments shall be made in U.S. Dollars.

52

Thermo Scientific AquaSensors

6. DELIVERY; CANCELLATION OR CHANGES BY BUYER. Unless otherwise specified and accepted by Seller, the Products will be shipped to the destination specified by Buyer, F.O.B. Seller’s facility in Beverly, Massachusetts. Freight and handling is prepaid and added to the invoice unless otherwise specified and agreed to in writing by the parties. Seller will have the right, at its election, to make partial shipments of the Products and to invoice each shipment separately. Seller reserves the right to stop delivery of Products in transit and to withhold shipments in whole or in part if Buyer fails to make any payment to Seller when due or otherwise fails to perform its obligations hereunder. All shipping dates are approximate only, and Seller will not be liable for any loss or damage resulting from any delay in delivery or failure to deliver which is due to any cause beyond Seller’s reasonable control. In the event of a delay due to any cause beyond Seller’s reasonable control, Seller reserves the right to terminate the order or to reschedule the shipment within a reasonable period of time, and Buyer will not be entitled to refuse delivery or otherwise be relieved of any obligations as the result of such delay. Products as to which delivery is delayed due to any cause within Buyer’s control may be placed in storage by Seller at Buyer’s risk and expense and for Buyer’s account. Orders in process may be canceled only with Seller’s written consent and upon payment of Seller’s cancellation charges. Orders in process may not be changed except with Seller’s written consent and upon agreement by the parties as to an appropriate adjustment in the purchase price therefore. Credit will not be allowed for Products returned without the prior written consent of Seller. Seller will not participate in a settlement of claims for concealed damage. Upon receipt of the Products, Buyer must unpack immediately and, if damage is discovered, must: 1. not move the Product from the location where it was initially examined and damaged was discovered; 2. retain shipping container and packing material; 3. notify the carrier’s agent to make an inspection; and 4. send Seller a copy of the carrier’s inspection report. 7. DROP SHIPMENTS IN U.S. and CANADA. Drop shipments for Dealers will be made at a 5% penalty to current dealer discount (5% loss of discount) for the items to be shipped. Standard drop shipment orders will be shipped within five (5) business days of the order date, subject to stock availability. For faster processing, see rush orders below. Drop shipment is only available to U.S. and Canadian destinations. 8. RUSH ORDERS. For Buyers in the U.S.: Rush orders received before 12 Noon Eastern STD Time will be shipped the same day. Rush orders received after 12 Noon Eastern STD Time will be shipped the next business day. For Buyers in Canada: Rush orders will be shipped within two (2) business days. For Buyers outside the U.S. and Canada: Contact your International dealer for rush order scheduling. All rush orders carry a fifty dollar ($50) incremental charge per order. 9. RETURN OF GOODS/RESTOCKING CHARGE Permission to return new, excess inventory must be obtained prior to return within thirty days of original shipment. Contact for a return authorization number:

Thermo Fisher Scientific Inc. Toll Free: 800.225.1480 Environmental Instruments Phone: 978.232.6000 Water Analysis Instruments Fax: 978.232.6015 (U.S. and Canada) 166 Cummings Center Fax: 978.232.6031 (Outside U.S. and Canada) Beverly, MA 01915

If any item authorized to be returned for credit, a 25% restocking charge of the price paid for the product will be made. (International Customer’s restocking fee of 25% will be off the International price). Only new (in-the-box) goods may be returned within thirty (30) days of shipment from Seller. Older items, service parts, and discontinued items cannot be returned for credit.


Thermo Scientific AquaSensors

10. SHORT SHIPMENTS. Seller must be notified within thirty (30) days of receipt of invoice of any item or billing discrepancies. All substantiated claims of short shipments will be remedied by a credit memo and a new order placed for short shipment. Any shipment discrepancy claimed after thirty (30) days of invoice date will not be honored and credit will not be issued by Seller. 11. TITLE AND RISK OF LOSS. Notwithstanding the trade terms indicated above and subject to the provisions of Section 12 below and to Seller’s right to stop delivery of Products in transit, title to and risk of loss of the Products will pass to Buyer upon delivery of possession of the Products by Seller to the carrier; provided, however, that title to any software incorporated within or forming a part of the Products shall at all times remain with Seller or the licensor(s) thereof, as the case may be. 12. SECURITY INTEREST. Seller reserves and Buyer grants to Seller a purchase money security interest in all Products until such time as Buyer fully pays for such Products. Buyer agrees to assist Seller in taking the necessary steps to perfect and protect such security interest. 13. WARRANTY. Seller warrants that during the warranty period, the Products will operate substantially in conformance with Seller’s published specifications and be free from defects in material and workmanship, when subjected to normal, proper and intended usage by properly trained personnel and not subject to accident, alteration, misuse, abuse, or breakage, for a period which varies based upon the Product purchased (see www.thermo.com/water) for the “Warranty Period”. Seller agrees during the Warranty Period, provided it is promptly notified in writing upon the discovery of any defect and further provided that all costs of returning the defective Products to Seller are pre-paid by Buyer, to repair or replace, at Seller’s option, defective Products so as to cause the same to operate in substantial conformance with said specifications. Replacement parts may be new or refurbished, at the election of Seller. All replaced parts shall become the property of Seller. Shipment to Buyer of repaired or replacement Products shall be made in accordance with the provisions of Section 6 above. Lamps, fuses, bulbs and other expendable items are expressly excluded from the warranty under this Section 13. There may be additional charges to Buyer, including freight, for warranty service performed in come countries. For service, call Thermo Fisher Scientific (or its authorized dealer outside the United States and Canada). Thermo Fisher Scientific reserves the right to ask for proof of purchase, such as the original invoice or packing slip. In no event shall Seller have any obligation to make repairs, replacements or corrections required, in whole or in part, as the result of (i) normal wear and tear, (ii) accident, disaster or event of force majeure, (iii) misuse, fault or negligence of or by Buyer, (iv) use of the Products in a manner for which they were not designed, (v) causes external to the Products such as, but not limited to, power failure or electrical power surges, (vi) improper storage of the Products or (vii) use of the Products in combination with equipment or software not supplied by Seller. If Seller determines that Products for which Buyer has requested warranty services are not covered by the warranty hereunder, Buyer shall pay or reimburse Seller for all costs of investigating and responding to such request at Seller’s then prevailing time and materials rates. If Seller provides repair services or replacement parts that are not covered by the warranty provided in this Section

13, Buyer shall pay Seller therefore at Seller’s then prevailing time and materials rates. ANY INSTALLATION, MAINTENANCE, REPAIR, SERVICE, RELOCATION OR ALTERATION TO OR OF, OR OTHER TAMPERING WITH, THE PRODUCTS PERFORMED BY ANY PERSON OR ENTITY OTHER THAN SELLER WITHOUT SELLER’S PRIOR WRITTEN APPROVAL, OR ANY USE OF REPLACEMENT PARTS NOT SUPPLIED BY SELLER, SHALL IMMEDIATELY VOID AND CANCEL ALL WARRANTIES WITH RESPECT TO THE AFFECTED PRODUCTS. THE OBLIGATIONS CREATED BY THIS SECTION TO REPAIR OR REPLACE A DEFECTIVE PRODUCT SHALL BE THE SOLE REMEDY OF BUYER IN THE EVENT OF A DEFECTIVE PRODUCT. EXCEPT AS EXPRESSLY PROVIDED IN THIS SECTION 8, SELLER DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, WITH RESPECT TO THE PRODUCTS, INCLUDING WITHOUT LIMITATION ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. REPRESENTATIONS AND WARRANTIES MADE BY ANY PERSON, INCLUDING SELLER’S AUTHORIZED DEALERS, REPRESENTATIVES AND EMPLOYEES WHICH ALTER OR ARE IN ADDITION TO THE TERMS OF THIS WARRANTY SHALL NOT BE BINDING UPON SELLER UNLESS AGREED UPON IN WRITING AND SIGNED BY ONE OF SELLER’S OFFICERS. SELLER DOES NOT WARRANT THAT THE PRODUCTS ARE ERROR-FREE OR WILL ACCOMPLISH ANY PARTICULAR RESULT. 14. INDEMNIFICATION. 14.1 By Seller. Seller agrees to indemnify, defend and save Buyer, its officer, directors, and employees from and against any and all damages, liabilities, actions, causes of action, suits, claims, demands, losses, costs and expenses (including without limitation reasonable attorney’s fees) (“Indemnified Items”) for (i) injury to or death of persons or damage to property to the extent caused by the negligence or willful misconduct of Seller, its employees, agents or representatives or contractors in connection with the performance of services at Buyer’s premises under this Agreement and (ii) claims that a Product infringes any valid United States patent, copyright or trade secret; provided, however, Seller shall have no liability under this Section to the extent any such Indemnified Items are caused by either (i) the negligence or willful misconduct of Buyer, its employees, agents or representatives or contractors, (ii) by any third party, (iii) use of a Product in combination with equipment or software not supplied by Seller where the Product would not itself be infringing, (iv) compliance with Buyer’s designs, specifications or instructions, (v) use of the Product in an application or environment for which it was not designed or (vi) modifications of the Product by anyone other than Seller without Seller’s prior written approval. Buyer shall provide Seller prompt written notice of any third party claim covered by Seller’s indemnification obligations hereunder. Seller shall have the right to assume exclusive control of the defense of such claim or, at the option of the Seller, to settle the same. Buyer agrees to cooperate reasonably with Seller in connection with the performance by Seller of its obligations in this Section. Notwithstanding the above, Seller’s infringement related indemnification obligations shall be extinguished and relieved if Seller, at its discretion and at its own expense (a) procures for Buyer the right, at no additional expense to Buyer, to continue using the Product; (b) replaces or modifies the Product so that it becomes non-infringing, provided the modification or replacement does not adversely affect the specifications of the Product; or (c) in the event (a) and (b) are not practical, refund to Buyer the amortized amounts paid by Buyer with respect thereto, based on a five (5) year amortization schedule. THE FOREGOING INDEMNIFICATION PROVISION STATES SELLER’S ENTIRE LIABILITY TO BUYER FOR THE CLAIMS DESCRIBED HEREIN.

2012 Product Pricing Guide

53


Product Pricing Guide 2012

14.2 By Buyer. Buyer shall indemnify, defend with competent and experienced counsel and hold harmless Seller, its parent, subsidiaries, affiliates and divisions, and their respective officers, directors, shareholders and employees, from and against any and all damages, liabilities, actions, causes of action, suits, claims, demands, losses, costs and expenses (including without limitation reasonable attorneys’ fees and disbursements and court costs) to the extent arising from or in connection with (i) the negligence or willful misconduct of Buyer, its agents, employees, representatives or contractors; (ii) use of a Product in combination with equipment or software not supplied by Seller where the Product itself would not be infringing; (iii) Seller’s compliance with designs, specifications or instructions supplied to Seller by Buyer; (iv) use of a Product in an application or environment for which it was not designed; or (v) modifications of a Product by anyone other than Seller without Seller’s prior written approval. 15. SOFTWARE. With respect to any software products incorporated in or forming a part of the Products hereunder, Seller and Buyer intend and agree that such software products are being licensed and not sold, and that the words “purchase”, “sell” or similar or derivative words are understood and agreed to mean “license”, and that the word “Buyer” or similar or derivative words are understood and agreed to mean “licensee”. Notwithstanding anything to the contrary contained herein, Seller or its licensor, as the case may be, retains all rights and interest in software products provided hereunder. Seller hereby grants to Buyer a royaltyfree, non-exclusive, nontransferable license, without power to sublicense, to use software provided hereunder solely for Buyer’s own internal business purposes on the hardware products provided hereunder and to use the related documentation solely for Buyer’s own internal business purposes. This license terminates when Buyer’s lawful possession of the hardware products provided hereunder ceases, unless earlier terminated as provided herein. Buyer agrees to hold in confidence and not to sell, transfer, license, loan or otherwise make available in any form to third parties the software products and related documentation provided hereunder. Buyer may not disassemble, decompile or reverse engineer, copy, modify, enhance or otherwise change or supplement the software products provided hereunder without Seller’s prior written consent. Seller will be entitled to terminate this license if Buyer fails to comply with any term or condition herein. Buyer agrees, upon termination of this license, immediately to return to Seller all software products and related documentation provided hereunder and all copies and portions thereof. Certain of the software products provided by Seller may be owned by one or more third parties and licensed to Seller.Accordingly, Seller and Buyer agree that such third parties retain ownership of and title to such software products. The warranty and indemnification provisions set forth herein shall not apply to software products owned by third parties and provided hereunder. 16. LIMITATION OF LIABILITY. NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED HEREIN, THE LIABILITY OF SELLER UNDER THESE TERMS AND CONDITIONS (WHETHER BY REASON OF BREACH OF CONTRACT, TORT, INDEMNIFICATION, OR OTHERWISE, BUT EXCLUDING LIABILITY OF SELLER FOR BREACH OF WARRANTY (THE SOLE REMEDY FOR WHICH SHALL BE AS PROVIDED UNDER SECTION 13 ABOVE)) SHALL NOT EXCEED AN AMOUNT EQUAL TO THE LESSER OF (A) THE TOTAL PURCHASE PRICE THERETOFORE PAID BY BUYER TO SELLER WITH RESPECT TO THE PRODUCT(s) GIVING RISE TO SUCH LIABILITY OR (B) ONE HUNDRED THOUSAND DOLLARS ($100,000). NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED HEREIN, IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF USE OF FACILITIES OR EQUIPMENT, LOSS OF REVENUE, LOSS OF DATA, LOSS OF PROFITS OR LOSS OF GOODWILL), REGARDLESS OF WHETHER SELLER (a) HAS BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES OR (b) IS NEGLIGENT.

54

Thermo Scientific AquaSensors

17. EXPORT RESTRICTIONS. Buyer acknowledges that each Product and any related software and technology, including technical information supplied by Seller or contained in documents (collectively “Items”), is subject to export controls of the U.S. government. The export controls may include, but are not limited to, those of the Export Administration Regulations of the U.S. Department of Commerce (the “EAR”), which may restrict or require licenses for the export of Items from the United States and their re-export from other countries. Buyer shall comply with the EAR and all other applicable laws, regulations, laws, treaties, and agreements relating to the export, re-export, and import of any Item. Buyer shall not, without first obtaining the required license to do so from the appropriate U.S. government agency; (i) export or re-export any Item, or (ii) export, re-export, distribute or supply any Item to any restricted or embargoed country or to a person or entity whose privilege to participate in exports has been denied or restricted by the U.S. government. Buyer shall cooperate fully with Seller in any official or unofficial audit or inspection related to applicable export or import control laws or regulations, and shall indemnify and hold Seller harmless from, or in connection with, any violation of this Section by Buyer or its employees, consultants, agents, or customers. 18. HAZARDOUS MATERIALS. Some Products may require special labeling and handling. Carriers may add additional freight charges for handling/transporting these materials. Consolidating such material with other products may be prohibited. Additional freight charges will be billed per Seller’s shipping terms. Be sure to advise Seller of shipping instructions for these hazardous materials to reduce your freight costs. 19. MISCELLANEOUS. (a) Buyer may not delegate any duties nor assign any rights or claims hereunder without Seller’s prior written consent, and any such attempted delegation or assignment shall be void. (b) The rights and obligations of the parties hereunder shall be governed by and construed in accordance with the laws of the Commonwealth of Massachusetts, without reference to its choice of law provisions. Each party hereby irrevocably consents to the exclusive jurisdiction of the state and federal courts located in Suffolk County, Massachusetts, in any action arising out of or relating to this Agreement and waives any other venue to which it may be entitled by domicile or otherwise. (c) In the event of any legal proceeding between the Seller and Buyer relating to this Agreement, neither party may claim the right to a trial by jury, and both parties waive any right they may have under applicable law or otherwise to a right to a trial by jury. Any action arising under this Agreement must be brought within one (1) year from the date that the cause of action arose. (d) The application to this Agreement of the U.N. Convention on Contracts for the International Sale of Goods is hereby expressly excluded. (e) In the event that any one or more provisions contained herein shall be held by a court of competent jurisdiction to be invalid, illegal or unenforceable in any respect, the validity, legality and enforceability of the remaining provisions contained herein shall remain in full force and effect, unless the revision materially changes the bargain. (f) Seller’s failure to enforce, or Seller’s waiver of a breach of, any provision contained herein shall not constitute a waiver of any other breach or of such provision. (g) Any notice or communication required or permitted hereunder shall be in writing and shall be deemed received when personally delivered or three (3) business days after being sent by certified mail, postage prepaid, to a party at the address specified herein or at such other address as either party may from time to time to designate to the other.


Thermo Scientific AquaSensors

2012 Product Pricing Guide

55


North America 166 Cummings Center Beverly, MA 01915 USA Toll Free: 1-800-225-1480 Tel: 1-978-232-6000 info.water@thermofisher.com Netherlands Tel: (31) 033-2463887 info.water.uk@thermofisher.com India Tel: (91) 22-4157-8800 wai.asia@thermofisher.com Japan Tel: (81) 045-453-9175 wai.asia@thermofisher.com China Tel: (86) 21-68654588 wai.asia@thermofisher.com Singapore Tel: (65) 6778-6876 wai.asia@thermofisher.com Australia Tel: (613) 9757-4300 in Australia (1300) 735-296 InfoWaterAU@thermofisher.com www.thermoscientific.com/processwater Š 2012 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. R-AQSPB_112_A

2012 aquasensors pricing r aqspb 112 a web  
Read more
Read more
Similar to
Popular now
Just for you