Page 1

®

Straight / Angulated Solid Multi-Unit System

© MIS Implants Technologies Ltd. All Rights Reserved.


2.

MIS Solid Multi-Unit screw-retained abutments provide a superior, yet simple prosthetic solution for screw-retained, full and partial prosthetic appliances in almost every clinical scenario. These low profile connections come in different insertion angles and in varying gingival heights for surgical efficiency and exceptional aesthetic results. 100% compatibility is assured using MIS implants in all connection types and platforms. The Solid Multi-Unit abutments are made of biocompatible titanium alloy Ti 6Al 4V ELI and are tested for strength and durability. Their high quality surface finish ensures a precision fit.

All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: MIS products referred to in this document should be used by licensed dentists only.


3.

Advantages

Accurate Allows more precise impression-taking □ Special gripping bar for stable insertion.

Versatile Choice of insertion angles and cuff heights □ Corresponding prosthetic components engineered for fit.

Predictable Low profile with no sharp edges for better soft tissue healing □ Exceptional aesthetic results and reliability.

Durable One-piece solid configuration greatly improves strength and durability □ Re-designed geometry for optimal distribution of force.


4.

Simple and easy to use, the straight Solid Multi-Unit abutments provide screw-retained restorative solutions for every clinical scenario in which implants with a divergence of up to 40º are used. Designed to fit all MIS implant connection types for optimal fit between abutment seat and implant connection.

Straight Solid Multi-Unit Abutments

Straight Solid Multi-Unit Abutment Package:

□ Plastic gripping bar □ Straight abutment

Insertion Path: Straight Solid Multi-Unit abutments may be used with implants with divergence of up to 40º.

^

^

40° 4.8mm

4.8mm 2mm

2mm

1-5mm

1-5mm

Internal Hex. Connection

Conical Connection Recommended tightening torque of 30 Ncm.


5.

Straight Solid Multi-Unit Abutments Insertion Procedure

Do not exceed 30Ncm

A

Use the plastic gripping tool to attach the abutment to the implant. B

Remove the plastic tool with a slight bending movement. C

Tighten abutment to 30Ncm using the ball attachment anchor key and torque wrench (MT-RI040).

A

B

C


6.

The Angulated Solid Multi-Unit abutment may be used with any of the standard screw drivers in the entire range of 0.05 inch hex. drivers Options include:

□ 17º angulation for use with implants with

Angulated Solid Multi-Unit Abutment Package:

□ 30º angulation for use with implants with

□ Metallic gripping bar □ Angulated abutment

a divergence of up to 75º.

a divergence of up to 100º.

Angulated Solid Multi-Unit Abutments

Insertion Path: 17º Solid Multi-Unit abutments may be used with implants with divergence of up to 75º.

17° 21°

2.1mm

75°

^

^

30°

21°

2.1mm

3.6mm 3.2mm

1mm

1mm

30º Solid Multi-Unit abutments may be used with implants with divergence of up to 100º.

^

Internal Hex. Connection

^

100°

Conical Connection * Recommended tightening torque of 20 Ncm.


7.

Angulated Solid Multi-Unit Abutments Insertion Procedure

Do not exceed 20Ncm

A

Use the metallic gripping tool to position the abutment, and attach the abutment to the implant with a clockwise screwing motion. B

Remove the metallic gripping tool with a counterclockwise movement. C

Tighten abutment to 20Ncm using the Hex. driver MT-RDL30 and torque wrench (MT-RI040). To screw in or unscrew angulated abutments, insert the Hex. driver into the lateral opening at the side of the abutment as shown.

A

B

C


8.

MIS supports two main types of overdenture restoration methods: Removable-bar restorations and fixed, screw-retained prosthetic devices. Both methods allow easy placement and may be removed as needed for oral hygiene treatment.

Prosthetic Options

Fixed, screw-retained bridge

Fixed, screw-retained prosthetic device

□ □

A low profile enables a variety of insertion options.

Improved prosthetic support. Increased inter-implant distance.


MIS MULTIFIX is a comprehensive solution offering full-arch, immediate placement of Multi-Unit abutments and final fixed screw-retained restoration using just four implants.

MIS MULTIFIX Solution

The MIS MULTIFIX system includes 18 and 20mm, long implants which provide high stability and optimal anchorage, a driliing set, a guide strip and a bone profiler kit for complete treatment of edentulous cases.

Fixed Restoration for atrophic ridges â–Ą â–Ą

Immediate esthetic and functional solution. Permanent fixed full-arch restoration.


All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: MIS products referred to in this document should be used by licensed dentists only.


MC-MUA08 Rev.7 04/2017

ÂŽ

MIS Implants Technologies Ltd.

www.mis-implants.com

The MIS Quality System complies with the following international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and Medical Device Directive 93/ 42/EEC. Please note that not all products are registered or available in every country or region.

Multi-Unit Leaflet  

MIS Multi-Unit screw-retained abutments provide a superior yet simple prosthetic solution for screw-retained full and partial prosthetic app...