Page 1

®

Sleeve Insertion Instructions (MG-LS041/ MG-LS071 / MG-FS020 / MG-NS040 / MG-NS070 / MG-PS024)

Item list:

MG-LS071

Guide sleeve Ø5.50mm, h7mm (7 pack)

MG-LS041

Guide sleeve Ø5.50mm, h4mm (12 pack)

MG-SI455

Guided sleeve insertion tool 4mm, Ø5.50mm

MG-NS040

MGUIDE narrow sleeve Ø4mm h4mm (12 pack)

MG-NS070

MGUIDE narrow sleeve Ø4mm h7mm (7 pack)

MG-NSI40

MGUIDE narrow sleeve insertion tool Ø4mm h4mm

MG-FS020

MGUIDE fixation sleeve Ø2mm (3 pack)

MG-FP020

MGUIDE fixation pin Ø2mm

MG-PS024

MGUIDE universal pilot sleeve dia.2.40 H 4mm (12 pack)

Filtek™ Bulk Fill*

MT-MSD20

Surgical adapter driver

1.


2.

Sleeve Insertion Instructions

(MG-LS041 / MG-LS071) / MG-NS040 / MG-NS070 The Sleeve Insertion Instructions are designed to enable a uniform and accurate insertion process. The controlled insertion process is essential to ensure sleeve stability and overall system accuracy.

1.

2.2.

3.

a)

b)

Assemble the sleeve insertion tool to the corresponding Surgical Adapter Driver.

Place the Guide Sleeve on the sleeve insertion tool.

Place a sparing amount of FiltekTM Bulk Fill* (a) on the Guide Sleeve and spread evenly (b).


3.

4.

While firmly holding the Template, insert the Sleeve into the Template. Remove any excess FiltekTM Bulk Fill* from on, in or around the template.

5.

Cure the Template with Sleeves in a light-cure box. (Recommended LED output should be between 550-2000mW/cm²)


4.

Sleeve Insertion Instructions

For MGUIDE Fixation Sleeve (MG-FS020)

1.

Insert the MGUIDE Fixation Sleeve onto the MGUIDE Fixation Pin.

2.

Place a sparing amount of FiltekTM Bulk Fill* (a) on the MGUIDE Fixation Sleeve and spread evenly (b).

a)

b)

*


3.

While firmly holding the Template, insert the MGUIDE Fixation Sleeve into the designated location on the Template. Remove MGUIDE Fixation Pin and any excess FiltekTM Bulk Fill* from on, in or around the Template.

4.

Cure the Template with Sleeves in a light-cure box. (Recommended LED output should be between 550-2000mW/cm²)

*FiltekTM Bulk Fill is a registered Trade Mark of the 3M Corporation. To purchase this item, please contact the 3M sales distributor in your region. MC-MG005 Rev.2

**Illustrations shown are for demonstration purposes only.

MGUIDE Sleeve Insertion Instructions  
Read more
Read more
Similar to
Popular now
Just for you