Issuu on Google+

TX3 Continental Series Enclosure Flush Mounting Installation Instructions Enclosure Mounting The TX3 Continental Series flush mounting entry panels are installed as outlined below.

Figure 1: TX3 Continental Enclosure Flush Mounting CONTINENTAL ENCLOSURE

10 3/8"

FRAME

DRY WALL FLUSH BACKBOX

18

1/2"

16

7/8"

MOUNTING KNOCKOUTS

FRONT

Use the two side slots for mounting the box to the joists in the wall

12"

0.5 ” 3.0 ”

The Continental Enclosure is flush mounted only Cut out in wall should be : 16 7/8” H x 10 3/8” W x 3” D

SIDE VIEW

Outside Frame dimensions are: 18 1/2”H x 12” W x 1/2” D

Installation Instructions for Flush Mounting the Continental Entry Enclosures 1. Cut out wall as per dimensions in diagram above. 2. Fit the continental lobby enclosure into the cut out space and secure it to the wall stud using the two slots, can be mounted left or right.

LT-993 Rev 0 October 2009


LT-993 TX3 Continental Series Flush Mounting Instr