Page 1

Metway Electromechanical Terminal Blocks

Ask about our comprehensive Electronic PCB Connectors, Transformers and Wiring Accessories catalogue.

Electromechanical Terminal Blocks

Ask about our Pre-fabricated Wiring Systems and Lighting Control catalogue.

Telephone: Sales Reception Accounts Fax: Email: Web:

+44 (0) 1273 431600 +44 (0) 1273 439266 +44 (0) 1273 431612 +44 (0) 1273 439288 sales@metway.co.uk www.metway.co.uk

DRAWINGS/DATA We shall make every effort to ensure the accuracy of technical details relating to our goods but we accept no liability in contract or tort or under statute or otherwise for any damages or injury arising directly or indirectly from any error or omission in such technical details whether caused by our negligence or otherwise. The Company reserves the right to amend and/or to improve designs at any time without notice.

www.metway.co.uk

Metway Electrical Industries Limited Barrie House 18 North Street Portslade East Sussex BN41 1DG

www.metway.co.uk Catalogue one


Electromechanical Terminal Blocks

Electromechanical Terminal Blocks

About Metway

Terms and Conditions

Metway History Metway Electrical Industries was established in 1937 and is still a privately owned family business. Metway has been providing electrical connector solutions for over fifty years to the lighting and electronic sector, now with a range in excess of 20,000 products from simple terminal blocks to PCB mount connectors and transformers.

CONDITIONS OF CONTRACT No condition or stipulations, which are attached to the buyer’s form of order, and which are inconsistent with these terms or which add to or modify them in any way, shall have any effect, unless expressly accepted in writing by a Director of the Company at the time of acknowledgement of each separate order. In the absence of such acceptance, the buyer shall be deemed to have withdrawn or waived his conditions or stipulations and to contract solely on these terms.

The Wiring Systems division was launched in 1999 concentrating on providing a “plug & play” alternative to conventional wiring which has evolved into a rapidly growing business. The inclusion of a full lighting control range ensures that Metway is at the forefront of its market. Metway’s head office in Brighton, incorporating a 17,500 square foot warehouse and production facility, is the hub that enables a fast turnaround of orders. A vast stock holding and on-site manufacturing ensures that customer requirements are met. Mission Statement To supply high quality competitive connector & lighting control solutions to the electrical & electronic industry, backed by high levels of service and technical support.

SPECIAL QUOTATIONS Special quotations at variance from our current PRICE LISTS, and variances from these Terms and Conditions of Trading, shall only be valid if in writing and signed by an authorised official of the Company

Our aim We aim to be the friendliest and most flexible organisation within our industry, providing fast and efficient service to all our customers.

ORDERS Orders should be in writing. Verbal orders will be accepted, but the customer will be responsible for any errors of description or quantity, or date of delivery in goods supplied there under.

Quality policy Metway is committed to a policy that will ensure that our customers are provided with products of a consistently high level of quality, reliability, safety and that products are delivered at the agreed time. Metway is also committed to improving service to our customers by exceeding their expectations.

CANCELLATION 1. After acceptance, orders shall not be subject to cancellation or alteration, except with the agreement of the Company in writing and signed by an authorised official. 2. Cancellation of orders for goods specially made to customers specifications, cannot be accepted 3. Cancellation or alteration charges may be applicable, to cover the cost of our administration

To achieve these objectives the company's Quality Management System is registered to BS EN ISO 9001:2008. As a means to monitor and measure Metway's performance a number of indicators are measured and reported at monthly management meetings, with a view to continual improvement.

NEW ACCOUNTS In order to avoid delay, goods up to the value of £250, can be despatched upon receipt of a completed and signed METWAY credit application form. For orders which exceed this value, it will be necessary to ask for the difference on account. Credit applications are only accepted on the METWAY credit application forms which can be posted or faxed immediately upon request.

The maintenance of quality is the responsibility of all staff and each is responsible for implementing the requirements of the quality system. Staff are trained in all aspects of the quality system. Rigorous quality control procedures and international product approval provides you and your customers with peace of mind. Environmental policy Metway accepts its environmental responsibilities and recognises its obligations to contribute to the resolution of global and local environmental issues by reducing its environmental impacts and by taking a leading role in promoting environmental good practice. Therefore Metway will: comply with all relevant legislation and codes of practice continually seek to improve its environmental performance integrate environmental concerns into all planning improve staff environmental awareness and understanding All materials used in our products are non-toxic and have no known detrimental effects on the Environment. Wherever possible we use packaging that is biodegradable or we can arrange for this to be returned to us for recycling or safe disposal. Please contact us if you have any special requirements in this area. Policies correct at time of going to print. For the latest information please go to www.metway.co.uk Metway Electrical Industries Limited Barrie House 18 North Street Portslade East Sussex BN41 1DG Telephone: Sales Reception Accounts Fax: Email: Web:

2

PRICES AND VARIATION 1. All prices quoted or listed by the Company, are based on the prices of the company’s suppliers at the time of quotation listing. These are subject to adjustment prior to despatch to cover any increase in such prices, or in taxation or duty which might take place prior to delivery, such prices are exclusive of packing, carriage and VAT. 2. Where goods are to be imported, the Company reserves the right to vary the price quoted, to reflect the rate of exchange for the purchase of the relevant currency in pounds sterling.

RETURNS We cannot accept the return of goods unless our prior consent has first been obtained, and the goods are returned to us in their original boxes or cartons, and in an unused condition. We reserve the right to make a 10% handling charge, min £40, which ever is the greater, to cover our administration costs, should this be necessary. DRAWINGS/DATA 1. All specifications, drawings and particulars of weights, dimensions, capacity or other details are approximate only. Specific details can be confirmed on request. 2. We shall make every effort to ensure the accuracy of technical details relating to our goods but we accept no liability in contract or tort or under statute or otherwise for any damages or injury arising directly or indirectly from any error or omission in such technical details whether caused by our negligence or otherwise. 3. The Company reserves the right to amend and/or improve designs at any time without notice. PERFORMANCE 1. We shall use our best endeavours to provide you with general advice about our goods. 2. The responsibility for ensuring that goods are sufficient and suitable for your requirements is your sole responsibility. EXPORT The foregoing conditions also apply to export orders. Our prices are ex works, packing & freight at extra cost. We shall be pleased to quote especially if substantial quantities are required. Payment terms are negotiable. DISCLAIMER Metway will not accept responsibility for connections made between its connectors and other unapproved manufacturers connectors. For details of approved connectors contact Metway.

DELIVERY DATES While the Company will use its best endeavours to meet any stated delivery dates, time shall not be the essence of the contract and the Company shall not be liable for any loss or damage whatsoever, resulting directly or indirectly from late delivery. DELIVERY 1. All prices are ex works, and all or any costs of delivery will be charged to the buyer, unless otherwise stated under the terms of the contract, or at time of order. Goods will be consigned by post, or road transport, to an address in the United Kingdom, specified by the buyer in writing. 2. In the event of non-deliver, the buyer must notify the Company (i) in the case of non-delivery, within the United Kingdom, within 7 days of notification of despatch, or receipt of invoice, whichever is the earlier (ii) In the case of overseas non-delivery, within 14 days of notification of despatch, or receipt of invoice, whichever is the earlier. Otherwise, a claim cannot be made on the carriers for loss in transit, if we are not so advised, the consignee will be deemed to be responsible for the loss 3. Every care is taken in checking goods In the event of shortage or damage, the buyer must notify the Company within 3 days of receipt of goods, the packages and the contents must be retained for carriers inspection where necessary PAYMENT 1. Payment is strictly 30 days Net, unless otherwise agreed in writing and signed by a director of the company. 2. If payment is not made in accordance with the agreed terms, the buyer shall be deemed to be in default of payment and the Company shall be entitled without prejudice to any other rights it may have to charge interest at the rate of 8% above the Bank of England base rate, from time to time in force, until the amount owing is paid in full. The Company reserves the right to charge the buyer for any legal costs involved in connection with the recovery of outstanding amounts due. 3. Failure to make due payment of deliveries, under these terms, or any other contract between the buyer and the Company, shall entitle the Company to delay, suspend, or cancel deliveries in whole or in part at its option, or withdraw account facilities. 4. If account facilities are withdrawn, then all outstanding invoices will immediately fall due for payment, and a demand as such will be made at the time of withdrawal of these facilities

+44 (0) 1273 431600 +44 (0) 1273 439266 +44 (0) 1273 431612 +44 (0) 1273 439288 sales@metway.co.uk www.metway.co.uk

+44 (0) 1273 431600

RETENTION OF TITLE 1. The property and title to the goods shall remain with the Company, until such time as all sums owing for and in respect of the goods have been received from the buyer by the Company 2. Until such time, the buyer is required to store the goods in such a way, that they clearly remain the property of the Company.

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

+44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

123


Electromechanical Terminal Blocks

Contents Page About Metway Contents Series 166ST/BU Series 166STD/BUD Series 1661ST/BU Series 166F Series 166EST/EBU Series 166KU/VK Series 166ALC/VLC Series 166SL/EL Series 166/1661ZEL Series 166GST/GBU Series 166GEST/GEBU Series 166GF/3 Series 166GF coloured Series 166GEST/GEBU coloured Series 166GBUVPC/3-4 Series 166GPF Series 166G Series 166ALCG/VLCG Series 166G/SL/EL Series 166GF/4 Series 166G classic Series 1661 Series 166GEST/GEBU Series 166ALCG/VLCG Series 166GSL/EL Series 166GF/5 Series 166GEST/GEBU Series 166ALCG/VLCG Series 166GSL/EL Series 166GST/GBU Series pre-wiring services Series MMB6-12 Series LCM leads Series LCM leads Series LCM leads Series Tee modules Series Tee modules Series 162STS Series 162 Series 162STS/2 Series 162VLS LED Series 162ALS LED Type 1 Series 162ALS LED Type 2 Series 160BU/163ST Series 302STP/STS Series 302SV/FB Series 302SV/FLW Series 322SV/323FB Series 322SV/323FB Series 322SVW/323PHFBW Series 324STFS/324STFB Series 302 Series 230 Series 323 Series 323 Series 500 Series 500K Series 500RZ Series 500SK Series ABK/ZEL Series 1000

60

+ 44 (0) 1273 431600

3 pole 16A single plugs and sockets 2-5 Pole 16A double plugs and sockets 3 pole 16A compact plugs and sockets 3 pole 16A flat rewireable plugs and sockets 3 pole 16A panel mount plugs and sockets 3 pole connecting links and end caps 3 pole non-rewireable plug and socket leads 3 pole 16A rewireable plug and socket leads 2-5 pole covers and base plates 3 pole 16A plugs and sockets to EN 60 320 3 pole 16A panel mount plugs and sockets to EN 60 320 3 pole 16A flat rewireable plugs and sockets to EN 60 320 3 pole 16A flat plug and socket appliance couplers to EN 60 320 3 pole 16A panel mount plug and socket appliance couplers to EN 60 320 3 & 4 pole 16A PCB mount socket connectors 3 pole 16A flat plug and socket connectors with spring clamp accessories locking slides / latches and T connectors 3 pole 16A non rewireable plugs and sockets 3 pole 16A rewireable plug and socket leads 4 pole 16A flat rewireable plugs and sockets 4 pole 16A single plugs and sockets 4 pole covers and bases for classic 4 pole 16A panel mount plugs and sockets to EN 60 320 4 pole 16A non rewireable plug and socket leads 4 pole 16A re wireable plug and socket leads 5 pole 16A flat re wireable plugs and sockets 5 pole 16A panel mount plugs and sockets to EN 60 320 5 pole 16A non rewireable plug and socket leads 5 pole 16A re-wireable plug and socket leads 6 pole 16A re-wireable plugs and sockets introduction to Metway wiring services Metway marshalling box 16A lighting control leads 3 -6 pole 16A lighting control leads black blue and side latching 6 - 16A non standard manufacture lighting control leads 3-6 pole introduction 4 -6 pole fixed and remote 2 pole "maxi" low voltage connectors 6 way distribution block 2 pole plug and socket connectors 2 pole extension cables 2 pole connecting cables - socket red/plug black 2 pole connecting cables - socket black/plug red 3 pole 10A plugs and sockets with covers and base plates 6A plugs and sockets 6A plugs and sockets 6A 90째 plugs and sockets 10A plugs and sockets 10A 90째 plugs and sockets 10A 90째 plugs and sockets 25A plugs and sockets 6A terminal blocks - standard and low profile 10A terminal blocks - compact style 10A terminal blocks- standard and raised base terminal block covers and base plates 10A terminal blocks - standard base 10A terminal blocks - raised base 10A terminal blocks - self fixing 10A terminal blocks - fully touchproof terminal block covers and strain reliefs 16A terminal blocks - standard base

+44 (0) 1273 439288

sales@metway.co.uk

2 3-4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

www.metway.co.uk

3


Electromechanical Terminal Blocks

Contents Page Series 1000K Series 324 Series 1500 Series 2000 Series 326 Series 327 Series 403SI Series 503SI Series ABK503 Series 1003SI Series 90007 Series 90008 Series 900Q Series 900ED/EDP Series 900EQ Series 900EQ Series 900QA Series 900SI Series 900SI Series 925SI Series 925SI Series 810 Series 930 Series 980/3 Series 980/4 Series 980/5 Series 980 Series 980ZEL Series LCS 45 Series 338-342 Series 359-363 Series 103 Series 150 Series 560 Series 304 Series 306 Series 432/433 Series 42 Series 815 Series 307PC Series 307PCF Series 3070 Series 982/983F Series 401 Series 401LF Series GST Series DK4 Series DK4SI Series RKW14M Series RKW14 Series RKW14SI Series RKW110 10mm² Series KUT 2.5 - 6 Series KUT 10 - 25 Series KUT 35 - 95 Series ET 6 - 10 Series ET 16 - 35 Series KULT 4 -10 Series KUDF 4 - 4A Notes Notes Terms & Conditions

4

+ 44 (0) 1273 431600

16A terminal blocks - raised base 16A terminal blocks - standard and raised base 32A terminal blocks - heavy duty 40A terminal blocks - heavy duty - standard and raised base 61A terminal blocks - heavy duty 82A terminal blocks - heavy duty- standard and raised base 10A 1-5 pole fused terminal block - 20mm x 5mm fuses 16A 1-5 pole fused terminal block - 20mm x 5mm fuses covers for fused terminal blocks 16A 1-5 pole fused terminal block - 1" x 1/4" fuses 16A terminal blocks - screw/screwless 16A terminal blocks - screw/screwless 16A terminal blocks - screw/screwless 16A terminal blocks - screw/screwless 16A terminal blocks - screw/screwless EQ series strain relief 16A 1 pole dovetail terminal block - screw/screwless fused terminal block assemblies fused terminal blocks - screw/screwless - 20mm x 5mm fuses fused terminal blocks - screw/screwless - 1" x 1/4" fuses fused terminal block assemblies 10A terminal blocks - screwless 10A terminal blocks - screwless 16A 3 pole terminal blocks - screwless 16A 4 pole terminal blocks - screwless 16A 5 pole terminal blocks - screwless 16A terminal blocks - screwless strain reliefs for 980 series IP65 connection to closed luminaires 34A steatite terminal blocks 44A steatite terminal blocks porcelain connectors - 2 and 3 pole, conductor size without wire protector 16mm2 10A porcelain terminal blocks 20A explosion proof steatite terminal block tab type terminal block tab type terminal block tab/screw type terminal block tab/screw type terminal block tab/screw type terminal block tab type terminal block barrier type terminal block covers and pins for 307 series 3/8" & 10mm pitch - tab type barrier blocks tab type terminal block tab/solder tag terminal blocks tab terminals transformer connectors fused transformer connectors "mini" transformer connectors transformer connectors fused transformer connectors 63A transformer connectors 6 - 8mm pitch feed through rail mount terminals 10 - 12mm pitch feed through rail mount terminals 17 - 25mm pitch feed through rail mount terminals 8 -10mm pitch rail mount earth terminals 16 - 35mm pitch rail mount earth terminals 6 - 10mm pitch spring loaded feed through rail mount terminals 8mm pitch fused rail mount terminals

+44 (0) 1273 439288

sales@metway.co.uk

66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks

Cable Hole 3.1

Assembled 50.5

SERIES 166ST/BU 3 pole 16A single plugs & sockets

FEATURES

Approvals

Series 166ST/166BU plug and socket connectors are primarily intended for use with lighting equipment where secure connections and quick release for servicing are essential. They are available in 2-5 pole lengths in black or white and are compatible for use with the double pole version 166STD/BUD as shown on page 6. 3-5 pole versions have an extended earth plug fitted as standard. All types are fully "touchproof" in both fitted and unfitted positions.

Nominal Cross-Section mm2

2,5

14 AWG

2,5

16A Voltage Rating

V

250/400*

600

400

*400v with 4-pole and 5-pole only

TECHNICAL DETAILS Mouldings: Inserts: Screws: Current rating: Voltage rating: Tracking distance: Conductor size: Temp. limits: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), UL94 V2 brass, tinned M3, steel, zinc plated, chromed to EN 61 984: 16A at 70ยบ C See approvals CTI > 600 0.5mm2 - 2.5mm2 max short term: 160ยบ C continuous: 100ยบ C 7mm IP20 IP40 when connected

OPTIONS Double cable hole: see page 6. PART NUMBER CODE

Covers & base plates: use type 166ZEL as shown on page 13.

Colour black Leave blank Colour white Enter W

Connecting links & end caps: see page 10.

Plug section Enter ST Socket section Enter BU Number of poles Enter 02 - 05

1 6 6

- - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

5


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks

Cable Hole 3.1

Assembled 50.5

SERIES 166STD/BUD 2-5 pole 16A double plugs & sockets

FEATURES

Approvals

Series 166STD/166BUD plug and socket connectors are primarily intended for use with lighting equipment where secure connections and quick release for servicing are essential. They are available in 2-5 pole lengths in black or white and are compatible for use with the single pole version 166ST/BU as shown on page 5. 3-5 pole versions have an extended earth plug fitted as standard. All types are fully "touchproof" in both fitted and unfitted positions.

Nominal Cross-Section mm2

2.5

14 AWG

2.5

16A Voltage Rating

V

250/400*

600

400

*400v with 4-pole and 5-pole only

TECHNICAL DETAILS Mouldings: Inserts: Screws: Current rating: Voltage rating: Tracking distance: Conductor size: Temp. limits: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), UL94 V2 brass, tinned M3, steel, zinc plated, chromed to EN 61 984: 16A at 70ยบ C See approvals CTI > 600 0.5mm2 - 2.5mm2 max short term: 160ยบ C continuous: 100ยบ C 7mm IP20 IP40 when connected

OPTIONS Single cable hole: see page 5. PART NUMBER CODE

Covers & base plates: use type 166ZEL as shown on page 13.

Colour black Leave blank Colour white Enter W

Connecting links & end caps: see page 10.

Plug section Enter ST Socket section Enter BU Number of poles Enter 02 - 05

1 6 6 6

D

+ 44 (0) 1273 431600

- - - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks

Assembled 46

SERIES 1661ST/BU 3 pole 16A compact plugs & sockets

FEATURES

BSI

Approvals

Series 1661ST/1661BU “compact” plug and socket connectors are primarily intended for use with lighting equipment where secure connections and quick release for servicing are essential. They are available in 3 pole lengths and have an extended earth plug fitted as standard. They are fully “touchproof” in both fitted and unfitted positions. Each pole is polarised to prevent incorrect alignment.

Nominal Cross-Section mm2

2.5

14 AWG

2.5

2.5

400

250

16A Voltage Rating

V

250

600

TECHNICAL DETAILS Mouldings: Inserts: Screws: Current rating: Voltage rating: Tracking distance: Conductor size: Temp. limits: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black or white, UL94 V2 brass, tinned M3, steel, zinc plated, chromed to EN 61 984: 16A at 70º C See approvals CTI > 600 0.5mm2 - 2.5mm2 max short term: 160º C continuous: 100º C 7mm IP20 IP40 when plugged in

OPTIONS Covers & base plates: use type 1661ZEL as shown on page 13. Connecting links & end caps: see page 10.

PART NUMBER CODE Colour black Leave blank Colour white Enter W

Plug section Enter ST Socket section Enter BU

1 6 6 1

0 3 - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

7


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166F 3 pole 16A low profile rewireable plugs & sockets

FEATURES

Approvals

Series 166F plug and socket connectors are primarily intended for use with lighting equipment, where limited access requires the use of low profile mouldings. They are available in 3 pole lengths (see options) and have an extended earth plug fitted as standard. They can be connected and disconnected under load in accordance with VDE 0627. They come complete with covers and base plates in an unassembled condition. Use in pairs or with snap in panel mount versions as shown on page 9.

Nominal Cross-Section mm2

14 AWG 16A

Voltage Rating

V

250

600

TECHNICAL DETAILS Mouldings: Inserts: Insert screws: Cover screws: Screw tightening torque: Current rating: Voltage rating: Conductor size: Temp. limits: Wire stripping length: Protection class:

PART NUMBER CODE

1.5

nylon 6.6 (PA6/6), black or white, UL94 V2, halogen free brass, tinned M3, steel, zinc plated, chromed C2.9 steel, zinc plated, chromed insert screws: 0.3 Nm cover screws: 0.4 Nm to EN 61 984: 16A at 70ยบ C See approvals 0.5mm2 - 1.5mm2 cable dia. 5.5mm - 8.5mm max short term: 160ยบ C continuous: 100ยบ C 7mm IP20 IP40 when connected

OPTIONS GST 3, 4 & 5 pole: see pages 16, 24 & 30. Pre-assembled with leads: see pages 11 & 12.

Plug section Enter ST Socket section Enter BU

1 6 6 8

Colour black Leave blank Colour white Enter W

F

0 3 - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166EST/EBU 3 pole 16A panel mount plugs & sockets 166EBU

FEATURES

166EST

BSI

Approvals

Series 166E plug and socket connectors are primarily intended for use with lighting equipment, appliances and other housings where secure connections and quick release for servicing are essential. They are designed to simply push in to panels which have preformed rectangular slots. They are available in 3 pole lengths and have an extended earth plug fitted as standard. They are fully "touchproof" in both fitted and unfitted positions. Each pole is polarised to prevent incorrect alignment. The internal connections are for use as screwless connectors, suitable for tinned stranded or solid conductors. Untinned stranded conductors cannot be used with this type.

Nominal Cross-Section mm2

2.5

14 AWG

2.5

2.5

400

250

16A Voltage Rating

V

250

600

TECHNICAL DETAILS Mouldings: Inserts: Conductor contacts: Current rating: Voltage rating: Tracking distance: Conductor size: Temp. limits: Wire stripping length: Panel thickness: Panel cut out dimensions: Protection class:

nylon 6.6 (PA6/6), black or white, UL94 V2 brass, tinned stainless steel to EN 61 984: 16A / 250v at 70ยบ C See approvals CTI > 600 0.5mm2 - 2.5mm2 max short term: 160ยบ C continuous: 100ยบ C 8mm 0.5mm - 1.2mm 33mm x 15.6mm IP20 IP40 when connected

OPTIONS PART NUMBER CODE

Locking slides: part no. 166VS (W). See page 21. Colour black Leave blank Colour white Enter W

Plug section Enter ST Socket section Enter BU

1 6 6 E

0 3 - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

9


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166KU/VK 3 pole connecting links & end caps 166KU

166KU 166GKU

FEATURES Series 166KU/GKU are used to connect permanently installed plugs (mains supply) and sockets (output). Suitable for use in electrical devices, such as furniture luminaires. Type KU are used in conjunction with series 166(1) connectors and type GKU are used with all 'G' series connectors. Series 166VKE/VKH are end caps for isolating all 166 series plug and socket connectors. They simply push into the plug or socket with a snap fit.

166VKE

166VKH

Type VKE are suitable for use with 166BU, 1661BU and 166GST 3 pole connectors. Type VKH are suitable for use with 166ST, 1661ST and 166GBU 3 pole connectors. Important Note: Series166KU/GKU must only be used with permanently installed devices - it is not suitable for use as a line extension.

TECHNICAL DETAILS Material: Voltage rating: Tracking distance: Maximum working temp:

PART NUMBER CODE

Connecting link Enter KU Connecting link Enter GKU Sealing cap Enter VK

1 6 6 10

166VK plug Enter H 166VK socket Enter E 166KU Leave blank

Nylon 6/6 (PA6/6), black or white, UL94 V2 400v ~ CTI 600 100ยบ C

Colour black Leave blank Colour white Enter W

0 3 - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166ALC/VLC 3 pole 16A non-rewireable plug & socket leads

FEATURES

Approvals

Series 166ALC/VLC 3 pole plug and socket connector leads are primarily intended for use with lighting equipment, where limited access requires the use of low profile mouldings. They have an extended earth plug fitted as standard and covers are ultrasonically welded preventing access to terminals. Starter leads are either plug to free end or socket to free end and extender leads are plug to socket. They can be connected & disconnected under load in accordance with VDE 0627. For prevention of accidental disconnection use locking slides as shown on page 21. LSOH cable is provided as standard. Please see options for variations.

Nominal Cross-Section mm2

1.5

Voltage Rating

250

V

TECHNICAL DETAILS Mouldings: Inserts: Leads: Contacts: Current rating: Voltage rating: Conductor size: Upper limit temperature: Dismantling length: Temp. limits: Wire stripping length: Protection class:

polyamide 6.6 (PA6/6), black or white brass, tinned low smoke, zero halogen brass, tinned to EN 61 984: 16A / 250v at 70ยบ C see approvals 1.5mm2 mouldings: to EN 61 984: 110ยบ C 32mm max short term: 160ยบ C continuous: 100ยบ C 7mm IP20 IP40 when connected

OPTIONS GST 4 & 5 pole: see pages 28 & 32.

PART NUMBER CODE

Locking slides: see page 21.

Extender lead Leave blank Plug to free end Enter S Socket to free end Enter B

Starter lead Enter A Extender lead Enter V

1 6 6

Length in metres eg. 0.5m enter 050, 2m enter 200, 3m enter 300 etc.

Combination of colours and/or codings: please ask for details. Cable variations: LSF & PVC. Please ask for details.

Colour black Leave blank Colour white Enter W

L C

3

+ 44 (0) 1273 431600

L - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

11


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166SL/EL 3 pole 16A rewireable plug & socket leads

FEATURES

Approvals

Series 166SL/EL 3 pole plug and socket connector leads are primarily intended for use with lighting equipment, where limited access requires the use of low profile mouldings. They have an extended earth plug fitted as standard and covers can be removed by the use of a screwdriver. Starter leads are either plug to free end or socket to free end. Extender leads are plug to socket. They can be connected and disconnected under load in accordance with VDE 0627. Use in pairs or with snap in panel mount appliance connectors as shown on page 9. For prevention of accidental disconnection use locking slides as shown on page 21. LSOH cable is provided as standard. Please see options for variations.

Nominal Cross-Section mm2

1.5

Voltage Rating

250

V

TECHNICAL DETAILS Mouldings: Inserts: Leads: Contacts: Current rating: Voltage rating: Conductor size: Upper limit temperature: Dismantling length: Temp. limits: Wire stripping length: Protection class:

polyamide 6.6 (PA6/6), black or white brass, tinned low smoke, zero halogen brass, tinned to EN 61 984: 16A / 250v at 70ยบ C see approvals 1.5mm2 mouldings: to EN 61 984: 110ยบ C 32mm max short term: 160ยบ C continuous: 100ยบ C 7mm IP20 IP40 when connected

OPTIONS GST 4 & 5 pole: see pages 29 & 33.

PART NUMBER CODE

Extender lead Leave blank Plug to free end Enter P Socket to free end Enter S

Starter lead Enter S Extender lead Enter E

L 12

Locking slides: see page 21. Combination of colours and/or codings: please ask for details.

Colour black Leave blank Colour white Enter W

Cable variations: LSF & silicon.

Length in metres eg. 0.5m enter 050, 1m enter 100, 2m enter 200 etc.

F 3 1 5 + 44 (0) 1273 431600

L - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166/1661ZEL 2-5 pole covers and base plates 166ZEL

1661ZEL

Dimension a

Dimension b

2 pole = 18

2 pole = 97

3 pole = 28

3 pole = 97

4 pole = 38

4 pole = 115

5 pole = 48

5 pole = 137

FEATURES

TECHNICAL DETAILS

Series 166ZEL covers and base plates are for use with 166 and 166D plug and sockets (see pages 5 & 6). They are available in 2 to 5 pole configurations, with or without latching hooks and eyes. Cable entry is half round (clamping screws are supplied).

Mouldings: Screws: Dismantling length: Temp. limits:

Half round cable entry

Flat cable entry

polyamide 6.6 (PA6/6), black or white C2.9 steel, zinc plated, chromed 26mm max short term: 160ยบ C continuous: 100ยบ C IP20

Protection class:

Series 1661ZEL covers and base plates are for use with1661and 166G. They are available as 3 poles and either without latching mechanism or with hook and eye to prevent accidental disconnection. The covers can be supplied with either half round or flat cable entry (clamping screws are supplied).

PART NUMBER CODE

PART NUMBER CODE

Colour black Leave blank Colour white Enter W Without latch Leave blank With hook latch Enter H With eye latch Enter O

Without latch Leave blank With hook latch Enter H With eye latch Enter O

Number of poles Enter 02 - 05

1 6 6 Z E L + 44 (0) 1273 431600

- - - - -

Colour black Leave blank Colour white Enter W

Half round entry Enter R Flat entry Enter F

1 6 6 1 Z E L

+44 (0) 1273 439288

0 3 - - -

sales@metway.co.uk

www.metway.co.uk

13


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166GST/GBU 3 pole 16A plugs & sockets to EN 60 320

FEATURES

Approvals

Series 166GST/166GBU plug and socket connectors are fully touchproof in both connected and disconnected positions and can be used as "Appliance Couplers" as required by EN 60 320. It is permitted for these to be engaged and disengaged under load in accordance with VDE 0627 and VDE 0628. They feature industry standard coding to ensure that correct polarity is guaranteed. They can also be fitted with covers and base plates incorporating strain reliefs. Please refer to page 13 and select 1661ZEL, which can be supplied with or without locking facility.

Nominal Cross-Section mm2

2.5

14 AWG

2.5

2.5

2.5

2.5

250

250

250/400

250

16A Voltage Rating

V

250

600

TECHNICAL DETAILS Mouldings: Inserts: Screws: Current rating: Voltage rating: Conductor size: Temp. limits: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black, white, grey and coral red brass, tinned M3 steel, zinc plated, chromed to EN 61 984: 16A / 250v at 70ยบ C to EN 60 320: 16A / 250v at 70ยบ C see approvals 0.5mm2 - 2.5mm2 max short term: 160ยบ C continuous: 100ยบ C 7mm IP20 IP40 - when plugged in

OPTIONS Covers & base plates: use series 1661ZEL see page 13.

PART NUMBER CODE

Plug section Enter ST Socket section Enter BU

Connecting links & end caps: see page 10. Colour black Leave blank Colour white Enter W Colour grey Enter GREY

1 6 6 G 14

+ 44 (0) 1273 431600

0 3 - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks PANEL MOUNT SERIES 166GEST/GEBU 3 pole 16A panel mount plugs & sockets to EN 60 320 166GEST

FEATURES

166GEBU

Approvals

Series 166GE 3 pole plug and socket connectors are fully touchproof in both connected and disconnected positions and can be used as “Appliance Couplers” as required by EN 60 320. It is permitted for these to be engaged and disengaged under load in accordance with VDE 0627 and VDE 0628. They feature industry standard coding to ensure that correct polarity is guaranteed and are designed to simply push in to panels which have preformed rectangular slots. They are fully "touchproof" in both fitted and unfitted positions. The internal connections are for use as screwless connectors, suitable for tinned stranded or solid conductors. Untinned stranded connectors cannot be used with this type.

Nominal Cross-Section mm2

2.5

14 AWG

2.5

2.5

2.5

2.5

250

250

400

250

16A Voltage Rating

V

250

600

TECHNICAL DETAILS Mouldings: Inserts: Current rating: Voltage rating: Conductor size: Temp. limits: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black, white, grey and coral red brass, tinned to EN 61 984: 16A / 250v at 70º C to EN 60 320: 16A / 250v at 70º C see approvals 0.5mm2 - 2.5mm2: solid core 0.5mm2 - 1.5mm2: tinned or ferruled max short term: 160º C continuous: 100º C 8mm-9mm IP20 IP40 - when plugged in

OPTIONS Locking slides: part no. 166VS(W). See page 21. PART NUMBER CODE

Plug section Enter ST Socket section Enter BU

1 6 6 GE

4 & 5 pole: see pages 27 & 31. Colour black Leave blank Colour white Enter W Colour grey Enter G

0 3 - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

15


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166GF 3 pole 16A low profile rewireable plugs & sockets to EN 60 320

FEATURES

Approvals

Series 166GF plug and socket connectors comply with EN60 320 and are primarily intended for use with lighting equipment, where limited access requires the use of low profile mouldings. They are available in three pole lengths (see options) and have an extended earth plug fitted as standard. They can be connected and disconnected under load in accordance with VDE 0627. They come complete with covers and base plates in an unassembled condition. Use in pairs or with snap in panel mount versions as shown on page 15.

Nominal Cross-Section mm2

1.5/2.5

14 AWG

1.5/2.5

16A Voltage Rating

V

250

600

250

TECHNICAL DETAILS Mouldings:

nylon 6.6 (PA6/6), black, white and coral red Inserts: brass, tinned Screws: clamping screws: M3 steel, zinc plated, chromed moulding screws: C2.9 steel, zinc plated, chromed Screw tightening torque: clamping screws: 0.3 Nm moulding screws: 0.4 Nm Current rating: to EN 61 984: 16A / 250v at 70º C to EN 60 320: 16A / 250v at 70º C Voltage rating: see approvals Conductor size: 1.5mm2 - 2.5mm2 Temp. limits: max short term: 160º C continuous: 100º C Wire stripping length: 7mm Protection class: IP20 IP40 - when plugged in

PART NUMBER CODE

Plug section Enter ST Socket section Enter BU

Strain reliefs are suitable for type H05VV round conductors: 3 x 1.5mm2 Ø 7.5mm - 8.8mm 3 x 2.5mm2 Ø 9.0mm - 10.5mm Conductors of size < 1.5mm2 upon request

Colour black Leave blank Colour white Enter W

OPTIONS ST 3 pole: see page 8. GST 4 & 5 pole: see pages 24 & 30. Pre-assembled leads: see pages 22 & 23.

1 6 6 G 16

F

0 3 - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks CONNECTING SYSTEM - 166GF coloured Appliance couples (EN 60 320), plugs & sockets, 3 way flat coding variants

FEATURES

The plugs and sockets in this range do, in every other respect, correspond with the standard types in black and white shown on page 16.

PART NUMBER CODE

1 6 6 G

Coding no. 5 pastel blue (eg. dimmer outputs)

Coding no. 2 pebble grey

Coding no. 6 green

Coding no. 3 light red

Coding no. 7 dark grey protection class II

Coding no. 4 brown

Coding no. 9 yellow (eg motion detectors)

Approvals

Series 166 coloured series provides an entire range with a mechanical coding system that prevents faulty connection with every pole having only one corresponding plug and socket to connect. In addition to this, each plug and socket is coloured coded and will not connect with a plug or socket in a different colour, providing an instantly recognisable system of connection. The housings come as standard in black but can be provided in white with the plug/socket colour coded.

Plug section Enter ST Socket section Enter BU

Coding no. 1 black, white, coral red

Colour Coral red Pebble grey Light red Brown Pastel blue Green Dark grey Yellow

F 0 3

+ 44 (0) 1273 431600

Nominal Cross-Section mm2

1.5/2.5

14 AWG

1.5/2.5

16A Voltage Rating

V

250

600

250

TECHNICAL DETAILS Mouldings:

nylon 6.6 (PA6/6), black, white and coral red, pebble grey, light red, brown, pastel blue, green, dark grey (protection class II), yellow Inserts: brass, tinned Screws: clamping screws: M3 steel, zinc plated, chromed moulding screws: C2.9 steel, zinc plated, chromed Screw tightening torque: clamping screws: 0.3 Nm moulding screws: 0.4 Nm Current rating: to EN 61 984: 16A / 250v at 70ยบ C to EN 60 320: 16A / 250v at 70ยบ C Voltage rating: see approvals Conductor size: 1.5mm2 - 2.5mm2 Temp. limits: max short term: 160ยบ C continuous: 100ยบ C Wire stripping length: 7mm Protection class: IP20 IP40 - when plugged in

Enter X K R B P G D Y

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

17


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks CONNECTING SYSTEM - AC 166-G Appliance couplers (EN 60 320), built-in plugs & sockets, 3 way coding variants

Panel cut-out

FEATURES

Approvals

Series 166GE coloured are a 3 pole plug and socket connection system that is fully touchproof in both connected and disconnected positions and can be used as “appliance couplers” as required by EN 60 320. It is permitted for these to be engaged and disengaged under load in accordance with VDE 0627 and 0628. They are designed to be used in conjunction with the 166GF range of flat 3 pole coloured connectors on page 17. and are manufactured to push fit into panels which have preformed rectangular cut outs. The internal connections in this case are screw versions and will therefore accept all types of cable up to and including 2.5mm2.

Nominal Cross-Section mm2

2.5

Voltage Rating

250

V

TECHNICAL DETAILS Mouldings:

Inserts: Screws: Screw tightening torque: Current rating: Voltage rating: Tracking distance: Conductor size: Temp. limits: Panel thickness: Panel cut out dimensions: Wire stripping length: Protection class:

PART NUMBER CODE

Plug section Enter ST Socket section Enter BU

1 6 6 GE 18

Colour Coral red Pebble grey Light red Brown Pastel blue Green Dark grey Yellow

0 3

+ 44 (0) 1273 431600

nylon 6.6 (PA6/6), black, white and coral red, pebble grey, light red, brown, pastel blue, green, dark grey (protection class II), yellow brass, tinned M3 steel, zinc plated, chromed 0.3 Nm to EN 61 984: 16A / 250v at 70º C to EN 60 320: 16A / 250v at 70º C see approvals CTI ≥ 600 0.5mm2 - 2.5mm2 max short term: 160º C continuous: 100º C 0.5mm - 1.5mm 33mm x 15.6mm 7mm IP20 IP40 - when plugged in

Enter X K R B P G D Y

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks PCB mount series 166G 3 & 4 pole Inserts - 3 and 4 way solder connection, vertical Coding No.1

white / black Coding No.2

pebble grey

FEATURES

Approvals

Series 166GPCB is a 3 & 4 pole socket connection system that is designed to be soldered to PC boards to provide a quick connection system. They are fully touchproof in both connected and disconnected positions. It is permitted for these to be engaged and disengaged under load to EN 61 984 in accordance with VDE 0627 and 0628. They are designed to be used in conjunction with the 166GF range of flat 3 & 4 pole connectors on pages 16 & 24 but can also be used with the standard 166G range on pages 14 & 25. The series can also be used to configure a 6 pole variant to be used with the 6 pole plug, as shown on page 34.

Nominal Cross-Section mm2

Voltage Rating

V

1.5/2.5

2.5

250

250

TECHNICAL DETAILS Mouldings: Inserts: Current rating: Voltage rating: Temp. limits: Solder pin length: Fixing hole diameter:

nylon 6.6 (PA6/6), black, white and pebble grey brass, tinned to EN 61 984: 16A / 250v at 70ยบ C to EN 60 320: 16A / 250v at 70ยบ C see approvals max short term: 160ยบ C continuous: 100ยบ C 3.3mm 1.4mm

PART NUMBER CODE

Colour Black White Pebble grey

Enter B W GY (3 pole only)

1 6 6 GB UV P C + 44 (0) 1273 431600

3 pole Enter 03 4 pole Enter 04

- - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

19


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166GPF 3 pole 16A low profile plug & socket with spring clamp

FEATURES

Approvals

The 166GPF series spring clamp connectors provide the same features as the 166GF series on page 16 but with the added advantage of a loop in and loop out facility for sheathed cables. This is facilitated by the use of two spring clamp terminals per pole as well as a double cable entry in the housing. The spring clamp terminals are suitable for use with solid core cable and flexible cables with ferruled or tinned ends in conductor sizes up to 2.5mm². The cable entry in the housing is suitable for use with H05VV-F round cables that have an outside diameter of 6.5mm up to 10.5mm.

Nominal Cross-Section mm2

2.5

Voltage Rating

250

V

TECHNICAL DETAILS Mouldings: polyamide 6/6, black or white Inserts: brass, tinned Clamping springs: stainless spring steel Screws: M3 steel, zinc plated, chromed Screw tightening torque: 0.4 Nm - 0.5 Nm Current rating: to EN 61 984: 16A / 250v at 70º C Voltage rating: see approvals Tracking distance: CTI ≥ 600 Conductor size: solid core: 0.5mm2 - 2.5mm2 flexible with ferrules: 0.5mm2 - 1.5mm2 Temp. limits: max short term: 160º C continuous: 100º C Wire stripping length: 8mm - 9mm Protection class: IP20 IP40 - when plugged in

PART NUMBER CODE

Plug section Enter ST Socket section Enter BU

1 6 6 GP 20

Colour black Leave blank Colour white Enter W

0 3

+ 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166G ACCESSORIES 3 pole T pieces & distribution boxes, locking slides

166VSF

166VSE

166GVT

FEATURES

Approvals

PART NUMBER 166GVT(W) are 3 pole ‘T’ pieces providing a single plug entry port and 2 x socket exit ports. Normally used with snap in socket panel mount connectors series 166GEBU(W)03 as shown on page 15. GST coding only available. “1 in 5 out” version also available - please ask for details. SERIES 166VS locking slides used to provide extra reliability of connection. Part number 166VSE(W) are used when connecting free low profile plugs or sockets to snap in panel mount connectors. Part number 166VSF(W) are used to connect free low profile plugs and sockets together.

Nominal Cross-Section mm2

2.5

Voltage Rating

250

V

TECHNICAL DETAILS - GVT Mouldings: Inserts: Current rating:

nylon 6.6 (PA6/6), black or white brass, tinned to EN 61 984: 16A / 250v at 70º C to EN 60 320: 16A / 250v at 70º C see approvals max short term: 160º C continuous: 100º C IP 20 IP 40 when connected

Voltage rating: Temp. limits: Protection class: TECHNICAL DETAILS - VS Mouldings: Temp. limits:

+ 44 (0) 1273 431600

+44 (0) 1273 439288

nylon 6.6 (PA6/6), black or white max short term: 160º C continuous: 100º C

sales@metway.co.uk

www.metway.co.uk

21


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166ALCG/VLCG 3 pole 16A non-rewireable plugs & sockets

FEATURES

Approvals

Series 166ALCG/VLCG 3 pole plug and socket connector leads comply with EN 60 320 and are primarily intended for use with lighting equipment, where limited access requires the use of low profile mouldings. They have an extended earth plug fitted as standard and covers are ultrasonically welded preventing access to terminals. Starter leads are either plug to free end or socket to free end and extender leads are plug to socket. They can be connected and disconnected under load in accordance with VDE 0627. For prevention of accidental disconnection use locking slides as shown on page 21. LSOH cable is provided as standard. Please see options for variations.

Nominal Cross-Section mm2

Voltage Rating

1.5/2.5

V

250

TECHNICAL DETAILS Mouldings: Inserts: Cable: Current rating: Voltage rating: Temp. limits: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black or white brass, tinned low smoke zero halogen (LSOH) continuous working temperature 70ยบ C to EN 61 984: 16A / 250v at 70ยบ C to EN 60 320: 16A / 250v at 70ยบ C see approvals max short term: 160ยบ C continuous: 100ยบ C 7mm IP 20 IP 40 when connected

OPTIONS GST 4 & 5 pole: see pages 28 & 32. Locking slides: see features. Combination of colours and/or codings: please ask for details.

PART NUMBER CODE

Cable variations: PVC & LSF. Please ask for details. Extender lead Leave blank Plug to free end Enter S Socket to free end Enter B

Starter lead Enter A Extender lead Enter V

1 6 6 22

Length in metres eg. 0.5m enter 050, 2m enter 200, 3m enter 300 etc.

Colour black Leave blank Colour white Enter W

L CG

+ 44 (0) 1273 431600

3

L +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166G/SL/EL 3 pole 16A rewireable plug & socket leads

FEATURES

Approvals

Series 166GF 3 pole plug and socket connector leads comply with EN 60320 and are primarily intended for use with lighting equipment, where limited access requires the use of low profile mouldings. They have an extended earth plug fitted as standard and covers can be removed by the use of a screwdriver. Starter leads are either plug to free end or socket to free end. Extender leads are plug to socket. They can be connected and disconnected under load in accordance with VDE 0627. Use in pairs or with snap in panel mount appliance connectors as shown on page 15. For prevention of accidental disconnection use locking slides as shown on page 21. LSOH cable is provided as standard. Please see options for variations.

Nominal Cross-Section mm2

Voltage Rating

1.5/2.5

V

250

TECHNICAL DETAILS Mouldings: Inserts: Screws: clamping screws: moulding screws: Cable: Current rating: Voltage rating: Temp. limits: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black or white brass, tinned M3 steel, zinc plated, chromed C2.9 steel, zinc plated, chromed low smoke zero halogen (LSOH) continuous working temperature 70ยบ C to EN 61 984: 16A / 250v at 70ยบ C to EN 60 320: 16A / 250v at 70ยบ C see approvals max short term: 160ยบ C continuous: 100ยบ C 7mm IP 20 IP 40 when connected

OPTIONS GST 4, 5 & 6 pole: see pages 29, 33 & 37.

PART NUMBER CODE

Extender lead Leave blank Plug to free end Enter P Socket to free end Enter S

Locking slides: see features. Length in metres eg. 0.5m enter 050, 2m enter 200, 3m enter 300 etc.

Starter lead Enter S Extender lead Enter E

L

GF 3 1 5 + 44 (0) 1273 431600

Combination of colours and/or codings: please ask for details. Cable variations: LSF & silicon.

Colour black Leave blank Colour white Enter W

L - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

23


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166GF/4 4 pole 16A low profile rewireable plugs & sockets

FEATURES

Approvals

Series 166G flat series plug and socket connectors are primarily intended for use with lighting equipment where secure connections and quick release for servicing are essential. They are available in 4 pole lengths and have an extended earth plug fitted as standard. They are fully “touchproof” in both fitted and unfitted positions. Each pole is polarised to prevent incorrect alignment.

Nominal Cross-Section mm2

Voltage Rating

V

applied for: 14 AWG 16A

applied for: 1.5/2.5

400

600

400

TECHNICAL DETAILS Mouldings: Inserts: Screws: clamping screws: moulding screws: Screw tightening torque: Current rating: Voltage rating: Temp. limits: Conductor size: Wire stripping length: Protection class:

PART NUMBER CODE

1.5/2,5

nylon 6.6 (PA6/6), black or white brass, tinned M3 steel, zinc plated, chromed C2.9 steel, zinc plated, chromed clamping screws: 0.3Nm / moulding screws: 0.4Nm to EN 61 984: 16A / 250v at 70º C to EN 60 320: 16A / 250v at 70º C see approvals max short term: 160º C continuous: 100º C 1.5mm2 - 2.5mm2 7mm IP 20 IP 40 when connected

OPTIONS GST 3 & 5 pole: see pages 16 & 30. Pre-assembled with leads: see pages 28 & 29.

Plug section Enter ST Socket section Enter BU

1 6 6 G 24

Colour black Leave blank Colour white Enter W

F

0 4 - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks

connected

SERIES 166G classic 4 pole

FEATURES

Approvals

Series 166G classic plug and socket connectors are primarily designed for use in lighting and power applications where secure connections and quick release for servicing are essential. They comply with EN 61 984 (VDE 0627) connecting and disconnecting under load and when using additional latching they may also be used in installation systems (VDE 0628). Additionally they comply with IEC 61535 (VDE 0606 part 200) for “not easily accessible areas”. They are available in 4 pole lengths only and have a leading earth pin fitted as standard. They are fully touchproof in both connected and unconnected positions and each pole is mechanically coded differently to prevent incorrect alignment.

Nominal Cross-Section mm2

Voltage Rating

V

1.5/2.5

applied for: 14 AWG 16A

applied for: 1.5/2.5

400

600

400

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Current rating: Voltage rating: Temp. limits: Conductor size: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black or white brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm to EN 61 984: 16A / 250v at 70º C see approvals max short term: 160º C continuous: 100º C 0.5mm2 - 4.0mm2 7mm IP 20 IP 40 when connected

OPTIONS Pre-assembled with leads: contact Metway head office for further details. PART NUMBER CODE

Covers & bases: see page 26.

Plug section Enter ST Socket section Enter BU Colour black Leave blank Colour white Enter W

1 6 6 G

0 4 - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

25


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 1661 4 pole covers and bases

Flat cable entry

FEATURES

TECHNICAL DETAILS

Series 1661 ZEL covers and bases are for use with 166G classic 4 pole plug and socket connectors. They are supplied as unassembled piece parts consisting of a base, cover and screws. They are suitable for use with H05VV-F round conductors with an outside diameter of 6.5mm – 11.5mm. There is a choice of covers either with or without interlocking and cable entry can be specified as either half round for cables 6.5mm – 8.5mm diameter or flat for cables 9mm – 11.5mm diameter.

Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Wire stripping length: Protection class:

Half round cable entry

nylon 6.6 (PA6/6), black or white brass, tinned C2.9 steel, zinc plated, chromed max: 0.4 Nm max short term: 160º C continuous: 100º C 7mm IP 20

PART NUMBER CODE Without latch Leave blank With hook latch Enter H With eye latch Enter O Half round entry Enter R Flat entry Enter F

1 6 6 1 Z E L 26

+ 44 (0) 1273 431600

Colour black Leave blank Colour white Enter W

0 4 - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166 GEST/GEBU 4 pole 16A panel mount plugs & sockets to EN 60 320

Panel cut-out

FEATURES Approvals

Series 166GE 4 pole mounting plug and socket connectors provide a simple snap in device for emergency type luminaires and other electrical equipment where daisy chaining of fittings is required. They are simply pushed into a preformed slot in the appliance and internal solid or ultrasonically welded stranded conductors are pushed into the screwless terminals at the back. Use with connectors as shown on page 24 or pre-assembled leads as shown on pages 28 & 29. For prevention of accidental disconnection of connectors use locking slides as shown on page 21.

Nominal Cross-Section mm2

2.5

14 AWG

2.5

2.5

2.5

2.5

250

250

250

250

16A

Voltage Rating

V

250

600

TECHNICAL DETAILS Mouldings: Inserts: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Panel thickness: Panel cut out dimensions: Protection class:

nylon 6.6 (PA6/6), black, white, grey and coral red brass, tinned max short term: 160ยบ C continuous: 100ยบ C to EN 61 984: 16A / 250v at 70ยบ C to EN 60 320: 16A / 250v at 70ยบ C see approvals 0.5mm2 - 2.5mm2: solid core 0.5mm2 - 1.5mm2: tinned or ferruled 8mm - 9mm 0.5mm - 1.2mm 42.75mm x 16.6mm IP 20 IP 40 when connected

OPTIONS

PART NUMBER CODE

3 & 5 pole: see pages 15 & 31.

Colour black Leave blank Colour white Enter W

Male plug Enter ST Female socket Enter BU

1 6 6 GE

0 4 - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

27


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166ALCG/VLCG 4 pole 16A non-rewireable plug & socket leads

FEATURES

Approvals

Series 166ALCG/VLCG 4 pole plug and socket connector leads comply with EN 60 320 and are primarily intended for use with emergency lighting equipment, where limited access requires the use of low profile mouldings. They have an extended earth plug fitted as standard. And covers are ultrasonically welded preventing access to terminals. Starter leads are either plug to free end or socket to free end and extender leads are plug to socket. They can be connected and disconnected under load in accordance with VDE0627. For prevention of accidental disconnection use locking slides as shown on page 21. LSOH cable is provided as standard. Please see options for variations.

Nominal Cross-Section mm2

2.5

Voltage Rating

250

V

TECHNICAL DETAILS Mouldings: Cables: Inserts: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black and white LSOH continuous working temp. 70ยบ C brass, tinned max short term: 160ยบ C continuous: 100ยบ C to EN 61 984: 16A / 400v at 70ยบ C to EN 60 320: 16A / 400v at 70ยบ C see approvals 1.5mm2 - 2.5mm2 7mm IP 20 IP 40 when connected

OPTIONS 3 & 5 pole: see pages 22 & 32. Locking slides: see page 21. Combination of colours and/or codings: please ask for details.

PART NUMBER CODE

Cable variations: PVC & LSF. Please ask for details. Extender lead Leave blank Plug to free end Enter S Socket to free end Enter B

Starter lead Enter A Extender lead Enter V

1 6 6 28

Length in metres eg. 0.5m enter 050, 2m enter 200, 3m enter 300 etc.

Colour black Leave blank Colour white Enter W

L CG

+ 44 (0) 1273 431600

4

L +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166G/SL/EL 4 pole 16A rewireable plug & socket leads

FEATURES

Approvals

Series 166GSL/EL 4 pole plug and socket connector leads comply with EN 60 320 and are primarily intended for use with emergency lighting equipment, where limited access requires the use of low profile mouldings. They have an extended earth plug fitted as standard and covers that can be removed with a screwdriver. Starter leads are either plug to free end or socket to free end and extender leads are plug to socket. They can be connected and disconnected under load in accordance with VDE 0627. Use in pairs or with snap in panel mount appliance connectors as shown on page 27. For prevention of accidental disconnection use locking slides as shown on page 21.

Nominal Cross-Section mm2

Voltage Rating

V

1.5/2.5

applied for: 14 AWG 16A

applied for: 1.5/2.5

400

600

400

TECHNICAL DETAILS Mouldings: Cables: Inserts: Screws: contact screws: moulding screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

PART NUMBER CODE

nylon 6.6 (PA6/6), black and white LSOH continuous working temp. 70ยบ C brass, tinned M3 steel, zinc plated, chromed C2.9 steel, zinc plated, chromed contacts: max: 0.3 Nm mouldings: max 0.4 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 61 984: 16A / 250v at 70ยบ C to EN 60 320: 16A / 250v at 70ยบ C see approvals 1.5mm2 - 2.5mm2 7mm IP 20 IP 40 when connected

OPTIONS Extender lead Leave blank Plug to free end Enter P Socket to free end Enter S

Length in metres eg. 0.5m enter 05, 2m enter 20, 3m enter 30 etc.

Starter lead Enter S Extender lead Enter E

L

GF 4 1 5 + 44 (0) 1273 431600

Colour black Leave blank Colour white Enter W

3, 5 & 6 pole: see pages 23, 33 & 37. Locking slides: see page 21. Cable variations: LSF & silicon. Please ask for details.

L - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

29


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166GF/5 5 pole 16A low profile rewireable plugs & sockets

FEATURES

Approvals

Series 166GF 5 pole plug and socket connectors comply with EN 60 320 and are primarily intended for use with lighting equipment including digital dimming or three phase supply, where limited access requires the use of low profile mouldings. They have an extended earth plug fitted as standard and can be connected and disconnected under load in accordance with VDE 0627. They come complete with covers and base plates in an unassembled condition. Use in pairs or with snap in panel mount versions as shown on page 31.

Nominal Cross-Section mm2

Voltage Rating

V

1.5/2.5

applied for: 14 AWG 16A

applied for: 1.5/2.5

400

600

400

TECHNICAL DETAILS Mouldings: Inserts: Screws: contact screws: moulding screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black and white brass, tinned M3 steel, zinc plated, chromed C2.9 steel, zinc plated, chromed contacts: max: 0.3 Nm mouldings: max 0.4 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 61 984: 16A / 400v at 70ยบ C see approvals 1.5mm2 - 2.5mm2 7mm IP 20 IP 40 when connected

OPTIONS

PART NUMBER CODE

GST 3 & 4 pole: see pages 16 & 24. Pre-assembled with leads: see pages 32 & 33.

Plug section Enter ST Socket section Enter BU

1 6 6 G 30

Colour black Leave blank Colour white Enter W

F

0 5 - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166GE 5 pole 16A panel mounting plugs & sockets

Panel cut out

FEATURES

Approvals

Series 166GE 5 pole panel mounting plug and socket connectors provide a simple snap in device for luminaires and other electrical equipment. They are simply pushed into a preformed slot in the appliance and internal solid or ultrasonically welded stranded conductors are pushed into the screwless terminals at the back. Use the connectors as shown on page 30 or preassembled leads as shown on pages 32 and 33. For prevention of accidental disconnection of connectors use locking slides as shown on page 21.

Nominal Cross-Section

applied for: applied for: applied for: applied for: applied for: applied for:

mm2

2.5

Voltage Rating

2.5

2.5

2.5

2.5

applied for: applied for: applied for: applied for: applied for: applied for:

V

250

600

250

250

400

250

TECHNICAL DETAILS Mouldings: Inserts: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Panel thickness: Panel cut out dimensions: Protection class:

PART NUMBER CODE

14 AWG 16A

nylon 6.6 (PA6/6), black and white brass, tinned max short term: 160ยบ C continuous: 100ยบ C to EN 61 984: 16A / 400v at 70ยบ C to EN 60 320: 16A / 250v at 70ยบ C see approvals 0.5mm2 - 2.5mm2: solid core 0.5mm2 - 1.5mm2: tinned or ferruled 8mm - 9mm 0.5mm - 1.2mm 52.5mm x 16.6mm IP 20 IP 40 when connected

OPTIONS 3 & 4 pole: see pages 15 & 27.

Colour black Leave blank Colour white Enter W Male plug Enter ST Female socket Enter BU

1 6 6 GE

0 5 - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

31


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166ALCG/VLCG 5 pole 16A non-rewireable plug & socket leads

FEATURES

Approvals

Series 166ALC/VLC 5 pole plug and socket connector leads are primarily intended for use with lighting equipment, including digital dimming or three phase supply, where limited access requires the use of low profile mouldings. They have an extended earth plug fitted as standard and covers are ultrasonically welded preventing access to terminals. Starter leads are either plug to free end or socket to free end and extender leads are plug to socket. They can be connected and disconnected under load in accordance with VDE 0627. For prevention of accidental disconnection use locking slides as shown on page 21. LSOH cable is provided as standard. Please see options for variations.

Nominal Cross-Section mm2

Voltage Rating

1.5/2.5

V

400

TECHNICAL DETAILS Mouldings: Cables: Inserts: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black and white LSOH continuous working temp. 70ยบ C brass, tinned max short term: 160ยบ C continuous: 100ยบ C to EN 61 984: 16A / 400v at 70ยบ C to EN 60 320: 16A / 400v at 70ยบ C see approvals 1.5mm2 - 2.5mm2 7mm IP 20 IP 40 when connected

OPTIONS 2.5mm2 cable. 3 & 4 pole: see pages 22 & 28. Locking slides: see page 21.

PART NUMBER CODE

Cable variations: PVC & LSF. Please ask for details. Extender lead Leave blank Plug to free end Enter S Socket to free end Enter B

Starter lead Enter A Extender lead Enter V

1 6 6 32

Length in metres eg. 0.5m enter 050, 2m enter 200, 3m enter 300 etc.

Colour black Leave blank Colour white Enter W

L CG

+ 44 (0) 1273 431600

5

L +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166G/SL/EL 5 pole 16A rewireable plug & socket leads

FEATURES

Approvals

Series 166G/SL/EL 5 pole plug and socket connector leads comply with EN 60 320 and are primarily intended for use with lighting equipment including digital dimming and three phase, where limited access requires the use of low profile mouldings. They have an extended earth plug fitted as standard and covers can be removed with a screwdriver. Starter leads are either plug to free end or socket to free end. Extender leads are plug to socket. They can be connected and disconnected under load in accordance with VDE 0627. Use in pairs or with snap in panel mount appliance connectors as shown on page 31. For prevention of accidental disconnection use locking slides as shown on page 21. LSOH cable is provided as standard. Please see options for variations.

Nominal Cross-Section mm2

Voltage Rating

1.5/2.5

V

400

TECHNICAL DETAILS Mouldings: Cables: Inserts: Screws: contact screws: moulding screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black and white LSOH continuous working temp. 70ยบ C brass, tinned M3 steel, zinc plated, chromed C2.9 steel, zinc plated, chromed contacts: max: 0.3 Nm mouldings: max 0.4 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 61 984: 16A / 250v at 70ยบ C to EN 60 320: 16A / 250v at 70ยบ C see approvals 1.5mm2 - 2.5mm2 7mm IP 20 IP 40 when connected

OPTIONS

PART NUMBER CODE

3, 4 & 6 pole: see pages 12, 29 & 37. Extender lead Leave blank Plug to free end Enter P Socket to free end Enter S

Length in metres eg. 0.5m enter 05, 2m enter 20, 3m enter 30 etc.

Starter lead Enter S Extender lead Enter E

L

GF 5 1 5 + 44 (0) 1273 431600

Locking slides: see page 21. Cable variations: LSF & silicon. Please ask for details.

Colour black Leave blank Colour white Enter W

L - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

33


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks SERIES 166GST/GBU 6 pole 16A rewireable plugs & sockets

FEATURES

Approvals

Series 166GST/GBU 6 pole plug and socket connectors comply with EN 60 320 and are primarily intended for use with lighting controllers. They can be connected and disconnected underload in accordance with VDE 0627. They come complete with covers and base plates in an unassembled condition. Use in pairs or with lighting control modules.

Nominal Cross-Section mm2

Voltage Rating

V

1.5/2.5

1.5/2.5

250

250

TECHNICAL DETAILS Mouldings: Inserts: Screws: contact screws: moulding screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6.6 (PA6/6), black/white or black/grey brass, tinned M3 steel, zinc plated, chromed C2.9 steel, zinc plated, chromed contacts: max: 0.3 Nm mouldings: max 0.4 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 61 984: 16A / 250v at 70ยบ C to EN 60 320: 16A / 250v at 70ยบ C see approvals 1.5mm2 - 2.5mm2 7mm IP 20 IP 40 when connected

OPTIONS PART NUMBER CODE

Pre-assembled with leads: see page 37 & 38. Alternative colours and/or codings

Colour black Leave blank Colour white Enter W Male plug Enter ST Female socket Enter BU

1 6 6 G 34

0 6 - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 166 plug & socket terminal blocks PREWIRING SERVICES

Metway offers a complete prewiring service for all types of terminal block, particularly our 166 range of plug and socket connectors. We can manufacture any type of cable assembly including those that do not utilise our own brand of connectors from our production facility at Portslade. We specialise in manufacturing projects to order and can offer the top quality service associated with Metway, as well as competitive pricing on both large and small volumes.

Metway have many contracts to supply customers with a wide range of cable assemblies, which enables them to make significant labour cost savings when linked to the manufacture of their own finished products. Please ask us for further information about this service and how it could be of benefit to you and your business.

Additionally, Metway Wiring Systems can provide for the comprehensive specification and manufacture of a complete pre-fabricated wiring system, including lighting control, for use in commercial, industrial and public funded projects. For further information on the full range of wiring system products, please contact our sales office for the product catalogue.

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

35


Electromechanical Terminal Blocks

Lighting Control Modules METWAY MARSHALLING BOX

The marshalling box is designed for ease of installation and provides a simple cost effective solution as either a standalone product or part of a pre-fabricated wiring system. Features 8, 12 output 10A max load Industry standard 6-pole GST connectors 2 channel Dual fix Suitable for all dimming options Emergency test Through wiring Dual channel dimming option Part numbers 8x output – MMB6-8 12x output – MMB6-12 PIR’s on/off MW1200PF/6P DSI – MW2000DF/6P DALI – MW2000DALIF/6P For all lead options – mains, emergency, dimming, see page 37. For all pluggable presence detector options/specifications, see pages 32 & 33 in the Metway Wiring Systems catalogue.

36

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

LCM Leads 3-pole GSTF (flat) - male to free end TECHNICAL DETAILS Cable: Prepared: Connector rating: Latching: Compatible LCM’s:

Length

Wiring configuration:

Part Number 3-core

1m

BL331

2m

BL332

3m

BL333

4m

BL334

5m

BL335

6m

BL336

7m

BL337

1.00mm LSOH white outer sheath stripped 70mm inner cores stripped and ferruled 16A no Metway marshalling box Metway Vitesse (non latching) Ex-Or CD Box ALC Spectrum Live (L1)=Brown, Earth (E) =Green/Yellow Neutral (N)= Blue

L

4-pole GSTF (flat) - male to free end TECHNICAL DETAILS Cable: Prepared: Connector rating: Latching: Compatible LCM’s: Wiring configuration: Length

Part Number 4-core

3-core

1m

BL441

BL431

2m

BL442

BL432

3m

BL443

BL433

4m

BL444

BL434

5m

BL445

BL435

6m

BL446

BL436

7m

BL447

BL437

1.00mm LSOH white outer sheath stripped 70mm inner cores stripped and ferruled 16A no Metway Vitesse (non latching) Ex-Or CD Box Live (L1)=Brown, Earth (E)=Green/Yellow Neutral (N)=Blue, EM Live (L2)=Black

6-pole GST black/grey - male to free end TECHNICAL DETAILS Cable: Prepared: Compatible LCM’s: Metway marshalling box Metway Vitesse/Rapid (non latching) Ex-Or CD Box ALC Spectrum Delmatic Length

Part Number 6-core

5-core

4-core

3-core

1m

BL661

BL651

BL641

BL631

2m

BL662

BL652

BL642

BL632

3m

BL663

BL653

BL643

BL633

4m

BL664

BL654

BL644

BL634

5m

BL665

BL655

BL645

BL635

6m

BL666

BL656

BL646

BL636

7m

BL667

BL657

BL647

BL637

1.00mm LSOH white outer sheath stripped 70mm inner cores stripped and ferruled 16A No

Connector rating: Latching: Wiring configuration: Live (L1)=Brown Black Earth (E)=Green/Yellow Neutral (N)=Blue EM Live (L1)=Black Grey Dim1 (E)=White Dim2 (N)=Red

All lengths and configurations available.

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

37


Electromechanical Terminal Blocks

LCM Leads 6-pole GST black/blue - male to free end TECHNICAL DETAILS Cable: Prepared: Connector rating: Latching: Compatible LCM’s:

Length

Part Number 6-core

5-core

4-core

3-core

1m

BL661BLU

BL651BLU

BL641BLU

BL631BLU

2m

BL662BLU

BL652BLU

BL642BLU

BL632BLU

3m

BL663BLU

BL653BLU

BL643BLU

BL633BLU

4m

BL664BLU

BL654BLU

BL644BLU

BL634BLU

5m

BL665BLU

BL655BLU

BL645BLU

BL635BLU

6m

BL666BLU

BL656BLU

BL646BLU

BL636BLU

7m

BL667BLU

BL657BLU

BL647BLU

BL637BLU

1.00mm LSOH white outer sheath stripped 70mm inner cores stripped and ferruled 16A no Dynalite Luxonic Set Square

Wiring configuration: Live (L1)=Brown Black Earth (E)=Green/Yellow Neutral (N)=Blue EM Live (1)=Black Blue Dim1 (2)=White Dim2 (3)=Red L

4-pole & 6-pole GST side latch - male to free end TECHNICAL DETAILS Cable: Prepared: Connector rating: Latching: Compatible LCM’s:

1.00mm LSOH white outer sheath stripped 70mm inner cores stripped and ferruled 16A yes - side latch Metway Vitesse/Rapid

4-pole Length

Part Number 4-core

3-core

1m

BL441VIT

BL431VIT

2m

BL442VIT

BL432VIT

3m

BL443VIT

BL433VIT

4m

BL444VIT

BL434VIT

5m

BL445VIT

BL435VIT

6m

BL646VIT

BL436VIT

7m

BL647VIT

BL437VIT

4-pole wiring configuration: Live (L1)=Brown Earth (E)=Green/Yellow Neutral (N)=Blue EM Live (L2)=Black

6-pole Length

Part Number 6-core

5-core

4-core

3-core

1m

BL661VIT

BL651VIT

BL641VIT

BL631VIT

2m

BL662VIT

BL652VIT

BL642VIT

BL632VIT

3m

BL663VIT

BL653VIT

BL643VIT

BL633VIT

4m

BL664VIT

BL654VIT

BL644VIT

BL634VIT

5m

BL665VIT

BL655VIT

BL645VIT

BL635VIT

6m

BL666VIT

BL656VIT

BL646VIT

BL636VIT

7m

BL667VIT

BL657VIT

BL647VIT

BL637VIT

6-pole wiring configuration: Live (L1)=Brown Black Earth (E)=Green/Yellow Neutral (N)=Blue EM Live (L1)=Black Grey Dim1 (E)=White Dim2 (N)=Red

All lengths and configurations available.

38

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

LCM Leads 3-pole & 6-pole Ensto D2 - male to free end TECHNICAL DETAILS Cable: Prepared: Connector rating: Latching: Compatible LCM’s:

1.00mm LSOH white outer sheath stripped 70mm inner cores stripped and ferruled 16A yes - side latch 2 x m Simmtronic

3-pole Length

Part Number

1m

BL331D2

2m

BL332D2

3m

BL333D2

4m

BL334D2

5m

BL335D2

6m

BL336D2

7m

BL337D2

3-pole wiring configuration: Live (1)=Brown Earth (E)=Green/Yellow Neutral (N)=Blue

3-core

L

6-pole Length

Part Number 6-core

5-core

4-core

3-core

1m

BL661D2

BL651D2

BL641D2

BL631D2

2m

BL662D2

BL652D2

BL642D2

BL632D2

3m

BL663D2

BL653D2

BL643D2

BL633D2

4m

BL664D2

BL654D2

BL644D2

BL634D2

5m

BL665D2

BL655D2

BL645D2

BL635D2

6m

BL666D2

BL656D2

BL646D2

BL636D2

7m

BL667D2

BL657D2

BL647D2

BL637D2

6-pole wiring configuration: Live (1)=Brown White Earth (E)=Green/Yellow Neutral (N)=Blue EM Live (A)=Black Blue Dim1 (B)=White Dim2 (C)=Red L

3-pole & 4-pole klik - male to free end TECHNICAL DETAILS Cable: Prepared:

Length

Connector rating: Latching: Compatible LCM’s: Wiring configuration: Live (L1)=Brown Earth (E)=Green/Yellow Neutral (N)=Blue EM Live (L2)=Black (P64)

Part Number 4-core

1.00mm LSOH white outer sheath stripped 70mm inner cores stripped and ferruled 6A yes Klik KLDS

3-core

P64

P22

1m

BL441P64

BL331P22

2m

BL442P64

BL332P22

3m

BL443P64

BL333P22

4m

BL444P64

BL334P22

5m

BL445P64

BL335P22

6m

BL446P64

BL336P22

7m

BL447P64

BL337P22

All lengths and configurations available.

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

39


Electromechanical Terminal Blocks

Tee Modules Appliance couplers (EN 60 320) Installation couplers (EN 61 535) The Metway “Tee” module utilises the GST range of connectors and is available in two formats, fixed or remote versions, making any component quickly and easily adaptable to the Metway Wiring System. Metway’s production facility is able to pre-wire the Lighting Control Modules with a system compatible tee and liaise with and supply the chosen luminaire manufacturer to ensure that all parts arrive on site pre-wired for ease of installation. Connectors are fully colour coded and mechanically polarised to prevent mismatching. Latching comes as standard.

TECHNICAL DETAILS Mouldings: Housing: Continuous working temp: Short time temp: Contact parts: Current rating: Upper limit temp: Protection class: Internal cable: External cable:

The GST range of connectors are designed for mains connection according to EN 61 984 (connecting and disconnecting under load) and used in installation systems when using the latching covers or locking slides (VDE 0628).

polyamide 6,6 polyamide 6. UL 94-V0 100º C 160º C brass, tinned 16A/250v at 70º C (to EN 60 320, EN 61 984) 110º C (to EN 61 984) IP20 IP40 when plugged in 1.50mm LSOH 6491B (BS7211) 1.50mm x 500mm LSOH singles (fixed) 1.00mm x 500mm LSOH flexible (remote)

Mouldings are halogen free, self extinguishing and low fuming.

Tee fixed to luminaire - single core cables secured via 20mm bush/locknut

40

+ 44 (0) 1273 431600

+44 (0) 1273 439288

Remote tee fixed to downlight/LCM flexible cable via 20mm compression gland

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Tee Modules 4-pole fixed and remote

4-POLE FIXED TEE Part Number: 3-core - TM04G3C 4-core - TM04G4C 4-POLE REMOTE TEE Part Number: 3-core - RTM04G3C 4-core - RTM04G4C

6-pole fixed and remote

6-POLE FIXED TEE Part Number: 3-core - TM06G3C 4-core - TM06G4C 5-core - TM06G5C 6-core - TM06G6C 6-POLE REMOTE TEE Part Number: 3-core - RTM06G3C 4-core - RTM06G4C 5-core - RTM06G5C 6-core - RTM06G6C 4-core + twisted pair (Superflex) - RTM06G/SF

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

41


Electromechanical Terminal Blocks

Series 162 plug & socket terminal blocks SERIES 162STS 2 pole “maxi” low voltage connectors 162STS

162ALC

162VLC

FEATURES

TECHNICAL DETAILS

Series 162STS incorporate a plug and a socket integrated into one connector. These can be inter-connected to each other by simply rotating 180°. Due to their height of 8mm, they are particularly suitable for use in confined areas and are mechanically coded to prevent incorrect connection. Available in colours black or white.

Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits:

Series 162ALC cord sets comprise of a 162 connector wired to a free end cable, complete with ferrules for connecting to transformers etc. Series 162VLC extension leads are fitted with a 162 connector on each end. Please refer to order box for standard cable lengths available. All items shown comply to low voltage regs. 73/23/EWG.

PART NUMBER CODE

CONNECTOR

Colour black Leave blank Colour white Enter W

1 6 2 S T S 0 2 42

+ 44 (0) 1273 431600

Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class: Cable: OPTIONS

Cables: other cable lengths available on request.

PART NUMBER CODE

Starter lead Enter A Extender lead Enter V

- - - - - -

nylon 6.6 (PA6/6), UL94 V0 brass, silver plated M3 steel, zinc plated, chromed max: 0.3 Nm max short term: 160º C continuous: 100º C 25A 48 ~ 0.5mm2 - 2.5mm2: solid or ferruled 7mm IP 20 double insulated: LSOH

1 6 2

+44 (0) 1273 439288

CONNECTOR WITH CABLE

Cable length: 0.35mm - Enter 035 0.60mm - Enter 060 1.20mm - Enter 120 1.80mm - Enter 180 2.40mm - Enter 240

L C

Colour black Enter B Colour white Enter W

- - - - -

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 162 plug & socket terminal blocks SERIES 162 6 way distribution blocks

FEATURES

TECHNICAL DETAILS

Series 162KV compact distribution blocks are designed to be connected behind the transformer or within the installation, for distributing or branching to other fittings. They are available in 6 way versions, with one port taken up by the incoming feed and 5 ports available for branch extensions. Available in colours black or white.

Mouldings: Inserts: Temp. limits:

Series 162SV cord sets comprise of a 162KV connector wired to a 7.5cm long cable, fitted witha standard 162STS connector. All 6 ports are then available for branch extensions.

nylon 6.6 (PA6/6), UL94 V0 brass, silver plated max short term: 160ยบ C continuous: 100ยบ C 25A 48 ~ 0.5mm2 - 2.5mm2: solid or ferruled IP 20

Current rating: Voltage rating: Conductor size: Protection class: OPTIONS

Cables: 162KV cord set with mains connecting cable available on request.

Items shown comply to low voltage regulations 73/23/EWG.

PART NUMBER CODE

DISTRIBUTION BLOCK

PART NUMBER CODE

Colour black Enter B Colour white Enter W

1 6 2 KV 0 6

Colour black Enter B Colour white Enter W

- - - - - - -

+ 44 (0) 1273 431600

DISTRIBUTION BLOCK WITH CABLE

1 6 2 SV 0 6

+44 (0) 1273 439288

- - - - - - -

sales@metway.co.uk

www.metway.co.uk

43


Electromechanical Terminal Blocks

Series 162 plug & socket terminal blocks SERIES 162 STS/2 LED grey 2 pole plug and socket connectors

FEATURES The 162 series completes the connecting system in the field of electrical installation for low voltage & LED application up to 48v. The wiring on the 162 LED series utilises silver plated contacts and double insulated stranded cable.

Nominal Cross-Section mm2

2,5

Voltage Rating

48

V

TECHNICAL DETAILS Connection: Mouldings:

Contacts: Screws: Current rating: Stripping length:

screw conductor size 0.5mm - 2.5mm2 polyamide 6.6, grey flammability rating to UL 94: V-2 continuous working temperature 100 째C short-time temperature 160 째C brass, tinned M3: max. 0.3Nm steel, zinc plated, chromed 15A at 70째 C 7mm

OPTIONS 162VLSLED035/120 extender lead 162ALSLE035/120 connecting lead

PART NUMBER CODE

1 6 2 S T S 0 2 L E D - - - 44

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Series 162 plug & socket terminal blocks SERIES 162 VLS LED 2 pole extension cables

FEATURES The 162 series completes the connecting system in the field of electrical installation for low voltage & LED application up to 48v. The wiring on the 162 LED series utilises silver plated contacts and double insulated stranded cable.

Nominal Cross-Section mm2

0,5

Voltage Rating

48

V

TECHNICAL DETAILS Mouldings:

Cables:

Contacts: Current rating: Conductor size:

polyamide 6.6, grey flammability rating to UL 94: V-2 continuous working temperature 100 째C short-time temperature 160 째C XYFAZ twin cable wire ends sealed brass, tinned 3A at 70째 C 0.5mm2

PART NUMBER CODE

1 6 2 V L S L E D 1 2 0 - - + 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

45


Electromechanical Terminal Blocks Series 162 plug & socket terminal blocks SERIES 162 ALS LED Type 1 2 pole connecting cables, socket red/plug black

FEATURES The 162 series completes the connecting system in the field of electrical installation for low voltage & LED application up to 48v. The wiring on the 162 LED series utilises silver plated contacts and double insulated stranded cable.

Nominal Cross-Section mm2

0,5

Voltage Rating

48

V

TECHNICAL DETAILS Mouldings:

polyamide 6.6, grey flammability rating to UL 94: V-2 continuous working temperature 100 째C short-time temperature 160 째C XYFAZ twin cable: socket red/plug black wire ends sealed brass, tinned 3A at 70째 C 0.5mm2 flexible, tinned 7mm

Cables:

Contacts: Current rating: Conductor size: Stripping length: OPTIONS Type 2 socket black/plug red

PART NUMBER CODE

1 6 2 A L S L E D 0 3 5 - - 60 46

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60


Electromechanical Terminal Blocks Series 162 plug & socket terminal blocks SERIES 162 ALS LED Type 2 2 pole connecting cables, socket black/plug red

FEATURES The 162 series completes the connecting system in the field of electrical installation for low voltage & LED application up to 48v. The wiring on the 162 LED series utilises silver plated contacts and double insulated stranded cable.

Nominal Cross-Section mm2

0,5

Voltage Rating

48

V

TECHNICAL DETAILS Mouldings:

polyamide 6.6, grey flammability rating to UL 94: V-2 continuous working temperature 100 째C short-time temperature 160 째C XYFAZ twin cable: socket black/plug red wire ends sealed brass, tinned 3A at 70째 C 0.5mm2 flexible, tinned 7mm

Cables:

Contacts: Current rating: Conductor size: Stripping length: OPTIONS Type 1 socket red/plug black

PART NUMBER CODE

1 6 2 A L S L E D 1 2 0 - - 60

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

47 60


Electromechanical Terminal Blocks Plug & socket terminal blocks SERIES 160BU/163ST 10A plugs & sockets with covers & base plates

163ST/BU

163ZEL03

163ZEL05

FEATURES

Approvals

SERIES 160/163 plug and socket connectors are available in 2, 3 and 5 pole lengths. The shrouding of the plug connectors prevent the two parts being incorrectly assembled. The 3 and 5 pole plug sections (163ST) have a leading earth pin which is 2mm longer, situated in the centre pole. The socket section (160BU) has a shroud to ensure that the plugs are totally enclosed before the earth connection is made. Covers and base plates, 163ZEL/ABK are available in 3 and 5 pole versions only. The cover (163ABK) can be used by snapping onto the plug or socket or both. The base plate (163ZEL) is supplied complete with an integral cord grip and screws which are supplied loose.

Nominal Cross-Section mm2

2.5

CONNECTORS

2.5

2.5 16A

Voltage Rating

V

400

600

380

380

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

PART NUMBER CODE

14 AWG

PART NUMBER CODE

nylon 6.6 (PA6/6), UL94 V2 brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 61 984: 16A / 250v at 70ยบ C see approvals without wire protectors: 4mm2 with wire protectors: 2.5mm2 6.5mm - 7mm IP 20 IP 40 when connected

COVERS & BASE PLATES

Without protectors Leave blank With protectors Enter DS

Plug section Enter 3ST Socket section Enter 0BU

Number of poles Enter 02 - 05

1 6 60 48

Cover Enter ABK Base plate Enter ZEL

- - - - - + 44 (0) 1273 431600

1 6 3

+44 (0) 1273 439288

3 pole Enter 03 5 pole Enter 05

- - - - sales@metway.co.uk

www.metway.co.uk

60


Electromechanical Terminal Blocks Plug & socket terminal blocks SERIES 302STP/STS 6A plugs & sockets

STANDARD PROFILE

LOW PROFILE

FEATURES

Approvals

Series 302STP/STS have split plugs and sockets for applications where infrequent connection and disconnection is needed. They are also available in low profile versions where height restrictions are critical and can be supplied with or without wire protectors. Captive screws are fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

20-14 AWG

26-12 AWG

6A

10A

300

300

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6, natural, UL94 V2 brass, tinned M2.6 steel, zinc plated, blue passivated max: 0.4 Nm max short term: 140ยบ C continuous: 105ยบ C 6A 400v to VDE 0110 pollution degree 2 2.5mm2 6mm IP 20 IP 40 when connected

OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

PART NUMBER CODE Plug section Enter STP Socket section Enter STS

Without protectors Leave blank With protectors Enter DS

Brass screws: nickel plated brass screws are available for marine applications. Housings: also available in higher grade nylon materials. Leading earth pins: details upon request.

Standard profile Leave blank Low profile Enter N

3 0 2 60

+ 44 (0) 1273 431600

Number of poles Enter 02 - 12

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

49 60


Electromechanical Terminal Blocks

Plug & socket terminal blocks SERIES 302SV/FB 6A plugs & sockets

STANDARD PROFILE

LOW PROFILE

FEATURES

Approvals

Series 302SV/FB have solid plugs and sockets with spring steel contact springs allowing more frequent use without loss of connection integrity. They are also available in low profile versions where there are height restrictions and can be supplied with or without wire protectors. Captive screws are fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

20-14 AWG

26-12 AWG

6A

10A

300

300

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6, natural, UL94 V2 brass, tinned M2.6 steel, zinc plated, blue passivated max: 0.4 Nm max short term: 140ยบ C continuous: 105ยบ C 6A 400v to VDE 0110 pollution degree 2 2.5mm2 6mm IP 20 IP 40 when connected

OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

PART NUMBER CODE Without protectors Leave blank With protectors Enter DS

Plug section Enter SV Socket section Enter FB

Brass screws: nickel plated brass screws are available for marine applications. Housings: also available in higher grade nylon materials. Leading earth pins: details upon request.

Standard profile Leave blank Low profile Enter N

Number of poles Enter 02 - 12

3 0 2 50

+ 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Plug & socket terminal blocks SERIES 302SV/FLW 6A 90ยบ plugs & sockets

FEATURES

Approvals

Series 302SV/FLW are designed for special wiring applications. The socket (302FLW) features a contact spring together with the wire protector, it forms a unit for reliable connection with low insertion and withdrawal forces and contact resistances. The funnel shaped entry bush ensures optimal guidance of the contact pin. The plug (302SV) is used as the mating component and is available with and without wire protectors.

Nominal Cross-Section mm2

Voltage Rating

V

20-14 AWG

26-14 AWG

6A

10A

300

300

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6, natural, UL94 V2 brass, tinned M2.6 steel, zinc plated, blue passivated max: 0.4 Nm max short term: 140ยบ C continuous: 105ยบ C 6A 400v to VDE 0110 pollution degree 2 2.5mm2 6mm IP 20 IP 40 when connected

OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

PART NUMBER CODE Without protectors in plug section Leave blank With protectors Enter DS

Plug section Enter SV Socket section Enter FLW

Brass screws: nickel plated brass screws are available for marine applications. Housings: also available in higher grade nylon materials. Leading earth pins: details upon request.

Number of poles Enter 02 - 12

3 0 2 + 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

51


Electromechanical Terminal Blocks

Plug & socket terminal blocks SERIES 322SV/323FB 16A plugs & sockets

FEATURES

Approvals

Series 322SV plug and 323FB sockets are horizontal mounting providing connection through a solid plug and a stainless steel contact spring. They are available with or without wire protectors with captive screws fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

18-12 AWG

26-10 AWG

20A

15A

300

300

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6, natural, UL94 V2 brass, tinned M3 steel, zinc plated, blue passivated max: 0.51 Nm max short term: 140ยบ C continuous: 105ยบ C 16A 400v to VDE 0110 pollution degree 2 solid: up to 4mm2 stranded: up to 2.5mm2 7mm IP 20 IP 40 when connected

OPTIONS Marking: special printing available. Please provide sketch.

PART NUMBER CODE Plug section Enter SV Socket section Enter FB

Plug section Enter 2 Socket section Enter 3

Cut lengths: standard 12 pole lengths can be cut to shorter lengths. Without protectors Leave blank With protectors Enter DS

Housings: also available in higher grade nylon materials. Leading earth pins: details upon request.

Number of poles Enter 02 - 12

3 2 52

Brass screws: nickel plated brass screws are available for marine applications.

- - - - - + 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Plug & socket terminal blocks SERIES 322SVW/323FBW 10A 90º plugs & sockets

FEATURES

Approvals

Series 322SVW plug used with type 323FBW socket provide a 90° entry of the plug into the socket. The plug section is fitted with longer pins to ensure a good connection. They are available with or without wire protectors with captive screws fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

18-12 AWG

26-10 AWG

26-10 AWG

20A

15A

10A

300

300

300

B, C, D

B

D, E

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class: OPTIONS

PART NUMBER CODE Without protectors Leave blank With protectors Enter DS

Plug section Enter SVW Socket section Enter FBW

Plug section Enter 2 Socket section Enter 3

nylon 6, natural, UL94 V2 brass, tinned M3 steel, zinc plated, blue passivated max: 0.51 Nm max short term: 140º C continuous: 105º C 10A 400v to VDE 0110 pollution degree 2 solid: up to 4mm2 stranded: up to 2.5mm2 7mm IP 20 IP 40 when connected

Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths. Brass screws: nickel plated brass screws are available for marine applications. Housings: also available in higher grade nylon materials.

Number of poles Enter 02 - 12

3 2

Leading earth pins: details upon request.

- - - - + 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

53


Electromechanical Terminal Blocks

Plug & socket terminal blocks SERIES 322SVW/323PHFBW 10A 90ยบ plugs & sockets

FEATURES

Approvals

Series 322SV/PH provide a double sided terminal block with the facility to plug a third terminal into the top. They are available with or without wire protectors with captive screws fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

18-12 AWG

26-10 AWG

26-10 AWG

20A

15A

10A

300

300

300

B, C, D

B

D, E

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6, natural, UL94 V2 brass, tinned M3 steel, zinc plated, blue passivated max: 0.51 Nm max short term: 140ยบ C continuous: 105ยบ C see approvals 400v to VDE 0110 pollution degree 2 2.5mm2 7mm IP 20 IP 40 when connected

OPTIONS PART NUMBER CODE

Marking: special printing available. Please provide sketch. Without protectors Leave blank With protectors Enter DS

Plug section Enter SV Socket section Enter PHFB

Plug section Enter 2 Socket section Enter 3

Leading earth pins: plug sections can be fitted with extra long pins to provide leading earth.

Number of poles Enter 02 - 12

3 2 54

Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

- - - - + 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Plug & socket terminal blocks SERIES 324STFS/324STFB 25A plugs & sockets

FEATURES

Approvals

Series 324STFS/STFB are heavy duty plug and socket connectors for use with conductors up to 6mm2. They are available with or without wire protectors with captive screws fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

18-10 AWG

26-10 AWG

25A

20A

300

300

B, D

B, C, D, E

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Protection class:

nylon 6, natural, UL94 V2 brass, tinned M3 steel, zinc plated, blue passivated max: 0.8 Nm max short term: 140ยบ C continuous: 105ยบ C 25A 400v to VDE 0110 pollution degree 2 4mm2 7mm IP 20 IP 40 when connected

OPTIONS PART NUMBER CODE

Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths. Leading earth pins: details upon request.

Without protectors Leave blank With protectors Enter DS Plug section Enter STFS Socket section Enter STFB

3 2 4 + 44 (0) 1273 431600

Number of poles Enter 02 - 12

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

55


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 302 26A terminal blocks - standard & low profile STANDARD PROFILE

LOW PROFILE

Length = number of poles x 8 less 2mm

FEATURES

Approvals

Series 302 terminal blocks are available in standard profile or low profile (suffixed N) which is particularly suitable where height restrictions are critical, but it may be necessary to consider additional insulation beneath the connector if mounting on a non insulated base. They are available with or without wire protectors. Captive screws are fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

20-12 AWG

26-10 AWG

26-10 AWG

20A

20A

10A

300

300

300

B, D

B

D, E

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V2 brass, tinned M2.6 steel, zinc plated, blue passivated max: 0.4 Nm max short term: 140ยบ C continuous: 105ยบ C 26A 400v to VDE 0110 pollution degree 2 1.5mm2 5mm

OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

PART NUMBER CODE Without protectors Leave blank With barrier inserts Enter SL With protectors Enter HDS

Standard profile Leave blank Low profile Enter N

Number of poles Enter 02 - 12

3 0 2 56

+ 44 (0) 1273 431600

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 230 16A - 24A terminal blocks - compact style

Length = number of poles x 8 less 2mm

FEATURES

Approvals

Series 230 terminal blocks provide a 10 amp current rating within a shorter length housing. They incorporate M3 screws which will meet the requirements of British Standards for equipment designated 10 amp nominal rating. They are available in standard height and raised base (suffixed K) which are suitable for applications where creepage and clearance distances must be observed. They are available in two grades of material, nylon 6 or nylon 6.6 which is suitable for high temperature applications. Supplied with or without wire protectors, with captive screws fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

2.5

22-12 AWG 30A

24-12 AWG 25A

2.5

2.5

1.5

2.5

2.5

2.5

2.5

450

150/250

300

400

400

400

400

400

400

400

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V2 nylon 6.6, brown, UL94 V0 brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 16A to EN 60 998: 24A see approvals without wire protectors: 4mm2 with wire protectors: 1.5mm2 5mm - 5.5mm

OPTIONS Marking: special printing available. Please provide sketch.

PART NUMBER CODE

Without protectors Leave blank With protectors Enter HDS

Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

Number of poles Enter 02 - 12

Standard profile Leave blank Low profile Enter K

2 3 0 + 44 (0) 1273 431600

Nylon 6.6 V2 Leave blank Nylon 6.6 V0 Enter T

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

57


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 323 10A terminal blocks - standard & raised base STANDARD BASE

RAISED BASE

Length = number of poles x 10 less 2mm

FEATURES

Approvals

Series 323 terminal blocks are available in standard height profile, suffixed WE (HDS) and in raised base profile, suffixed FU (HDS). The raised base versions are particularly suitable to obtain required minimum creepage and clearance distances when mounting on noninsulating surfaces. They are available with or without wire protectors, with captive screws fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

20-10 AWG

26-10 AWG

26-10 AWG

30A

25A

10A

300

300

300

B, D

B

D, E

2.5

400

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6.6, natural, UL94 V2 brass, tinned M3 steel, zinc plated, blue passivated max: 0.51 Nm max short term: 140ยบ C continuous: 105ยบ C 26A 400v to VDE 0110 pollution group 2 2.5mm2 6.5mm

OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

PART NUMBER CODE Without protectors Standard profile Enter WE Without protectors Raised profile Leave blank With protectors Enter HDS Standard base Leave blank Raised base Enter K

Number of poles Enter 02 - 12

3 2 3 58

Covers & base plates: see page 58.

+ 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 323 Terminal block covers & base pates

FEATURES

TECHNICAL DETAILS

Series A323 covers and B323 base plates are used together to provide a complete encapsulation of the terminal block apart from the necessary apertures required to gain access to the screws and cable entry holes. The covers are available in 2 and 3 poles and can be mounted side by side to produce any number of poles required, they can only be used in conjunction with the base plates. The base plates are available in 2 to 12 poles and if required can be used separately to provide rear insulation only.

Mouldings: Maximum working temp: Tracking:

nylon 6, natural, UL94 V2 80ยบ C CTI > 600

LENGTH (BASE PLATES) Poles 2 3 4 5

mm 19 29 39 49

Poles 6 7 8 9

mm 59 69 79 89

Poles 10 11 12

mm 99 109 119

Series B323Z base plates are fitted with an antirotation peg and are available in 2 or 3 poles only with one screw fixing.

PART NUMBER CODE

PART NUMBER CODE

Base plate without peg Leave blank Base plate with anti-rotation peg Enter Z

Number of poles Enter 02 - 12

A 3 2 3

- - - - - - - - -

+ 44 (0) 1273 431600

B 3 2 3

+44 (0) 1273 439288

Number of poles Type B323 Enter 02 - 12 Type B323Z Enter 02 - 03

- - - - sales@metway.co.uk

www.metway.co.uk

59


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 500 16A - 24A terminal blocks - standard base

TYPE MDS

Length = number of poles x 10 less 3.4mm

FEATURES

Approvals

Series 500 terminal blocks are available in 3 grades of housing material, nylon 6, nylon 6.6 (H type) and nylon 6.6 (T type) which is suitable for high temperature applications. Two variations of wire protectors are offered, type HDS have standard protectors and type MDS have barrier protectors. Versions without wire protectors are also offered with barriers in inserts (type SL). Captive screws are fitted as standard.

Nominal Cross-Section mm2

2.5

22-10 AWG 30A

24-12 AWG 25A

2.5

2.5

2.5

2.5

2.5

2.5

2.5

2.5

Voltage Rating

450

150/250 500 KUS for 600v

300

400

400

400

400

400

400

400

400

V

TECHNICAL DETAILS Mouldings:

Inserts: Screws: Screw tightening torque: Maximum working temp:

Current rating: Voltage rating: Conductor size: Wire stripping length:

PART NUMBER CODE

nylon 6, natural, UL94 V2 nylon 6.6, natural, UL94 V2 (H) nylon 6.6, brown, UL94 V0 (T) brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm nylon 6: 100ยบ C nylon 6.6 (H type): 100ยบ C nylon 6.6 (T type): 160ยบ C to EN 60 598: 16A to EN 60 998: 24A see approvals without wire protectors: 6.0mm2 with wire protectors: 2.5mm2 7mm - 7.5mm

OPTIONS Without protectors Leave blank With barrier inserts Enter SL With std protectors Enter HDS With barrier protectors Enter MDS

5 0 0 60

Marking: special printing available. Please provide sketch.

Number of poles Enter 02 - 12

Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

Nylon 6, V2 Leave blank Nylon 6.6, V2 Enter H Nylon 6.6, V0 Enter T

3 5

+ 44 (0) 1273 431600

Covers: series ABK405 - see page 63.

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 500K 16A - 24A terminal blocks - raised base

TYPE MDS

Length = number of poles x 10 less 3.4mm

FEATURES

Approvals

Series 500K terminal blocks are available in 3 grades of housing material, nylon 6, nylon 6.6 (H type) and nylon 6.6 (T type) which is suitable for high temperature applications. Two variations of wire protectors are offered, type HDS have standard protectors and type MDS have barrier protectors. Versions without wire protectors are also offered with barriers in inserts (type SL). Captive screws are fitted as standard.

Nominal Cross-Section mm2

2.5

22-10 AWG 30A

24-12 AWG 25A

2.5

2.5

2.5

2.5

2.5

2.5

2.5

2.5

Voltage Rating

450

150/250 500 KUS for 600v

300

400

400

400

400

400

400

400

400

V

TECHNICAL DETAILS Mouldings:

Inserts: Screws: Screw tightening torque: Maximum working temp:

Current rating: Voltage rating: Conductor size: Wire stripping length:

PART NUMBER CODE

nylon 6, natural, UL94 V2 nylon 6.6, natural, UL94 V2 (H) nylon 6.6, brown, UL94 V0 (T) brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm nylon 6: 100ยบ C nylon 6.6 (H type): 100ยบ C nylon 6.6 (T type): 160ยบ C to EN 60 598: 16A to EN 60 998: 24A see approvals without wire protectors: 6.0mm2 with wire protectors: 2.5mm2 7mm - 7.5mm

OPTIONS Without protectors Leave blank With barrier inserts Enter SL With std protectors Enter HDS With barrier protectors Enter MDS

Marking: special printing available. Please provide sketch.

Number of poles Enter 02 - 12

5 0 0 K + 44 (0) 1273 431600

Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

Nylon 6, V2 Leave blank Nylon 6.6, V2 Enter H Nylon 6.6, V0 Enter T

3 5

Covers: series ABK405 - see page 63.

- - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

61


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 500RZ 16A - 24A terminal blocks - self fixing

Length = number of poles x 10 less 3.4mm

FEATURES

Approvals

Series 500RZ terminal blocks are the self fixing version of our standard 500 series as shown on page 59. They incorporate built in fixing pins which can be pushed in to pre-drilled holes in the mounting surface. There are two lengths of fixing pins available, type RZ for base plates of 0.5mm to 1.4mm thickness and type LRZ for base plates of 1.5mm to 2.5mm thickness. They are available with or without wire protectors. Captive screws are fitted as standard.

Nominal Cross-Section mm2

2.5

22-10 AWG 30A

24-12 AWG 25A

2.5

2.5

2.5

2.5

2.5

2.5

2.5

2.5

Voltage Rating

450

150/250 500 KUS for 600v

300

400

400

400

400

400

400

400

400

V

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V2 brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 16A to EN 60 998: 24A see approvals without wire protectors: 6.0mm2 with wire protectors: 2.5mm2 7mm - 7.5mm

OPTIONS Marking: special printing available. Please provide sketch.

PART NUMBER CODE For thickness 0.5mm - 1.4mm Enter RZ For thickness 1.5mm - 2.5mm Enter LRZ

Without protectors Leave blank With protectors Enter HDS

Cut lengths: standard 12 pole lengths can be cut to shorter lengths. Covers: series ABK405 - see page 63.

Number of poles Enter 02 - 12

5 0 0 62

+ 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 500SK 16A - 24A terminal blocks - fully touchproof

TYPE MDS

Length = number of poles x 10 less 3.4mm

FEATURES

Approvals

Series 500SK terminal blocks are available in 2 grades of housing material, nylon 6, and nylon 6.6 which is suitable for high temperature applications. They are primarily used on lighting equipment to protection class 2, where conformance to EN60335-1 or EN60598-1 is required. They are designed with extra long screw turrets and extended housings to be fully touchproof without the need to use covers. There are 2 types of wire protectors offered, either standard protectors or barrier protectors (type MDS). Versions without wire protectors are also offered with barrier inserts (type SL). Captive screws are fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

4.0

22-10 AWG

24-12 AWG

30A

25A

600

600

750

4.0

750

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Maximum working temp: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V2 nylon 6.6, brown, UL94 V0 (T) brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm nylon 6: 100ยบ C nylon 6.6: (T type) - 160ยบ C to EN 60 598: 16A to EN 60 998: 24A see approvals without wire protectors: 6.0mm2 with wire protectors: 2.5mm2 7mm - 7.5mm

OPTIONS Marking: special printing available. Please provide sketch.

PART NUMBER CODE

Without protectors Leave blank With barrier inserts Enter SL With std protectors Enter HDS With barrier protectors Enter MDS

Cut lengths: standard 12 pole lengths can be cut to shorter lengths. Number of poles Enter 02 - 12

5 0 0 SK + 44 (0) 1273 431600

Nylon 6, V2 Leave blank Nylon 6.6, V0 Enter T

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

63


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES ABK/ZEL Terminal block covers & strain reliefs 500ZEL

FEATURES

TECHNICAL DETAILS

Series 500ZEL strain reliefs consist of a solid base complete with cord grip and two Philips head fixing screws. They are provided with a captive clamping mechanism that can be rotated 180° making them suitable for accommodating variable sizes of conductors. There are two variations available, either screw fixing or catch pin fixing (type RZ). Both versions are available in 3 poles only.

Mouldings: type ABK standard: type ABK (T) Technyl: type 500ZEL: Screws: Maximum working temp:

Series ABK covers are for use with all types of terminal blocks from series 500, 1000 & 1500 (see pages 59-67). They are available in either standard nylon 6.6 or Technyl material which is suitable for high temperature applications.

PART NUMBER CODE

Series 500 Enter 405 Series 1000 Enter 406 Series 1500 Enter 415

Conductor size:

Dimension B

Dimension H

500 series 29mm

500 series 18.8mm

1000 series 35.3mm

1000 series 21.5mm

1500 series 37.5mm

1500 series 25.5mm

nylon 6.6, grey, UL94 V2 nylon 6.6, brown, UL94 V0 nylon 6.6, white C2.9 steel, zinc plated, chromed ABK standard: 100º C ABK (T) Technyl: 165º C 500ZEL: 100º C Ø 5.5mm - 11mm

OPTIONS Cut lengths: series ABK are also available in cut lengths from 2-11 poles. Colours: alternative colours can be supplied as a special requirement for series ABK, details upon request.

PART NUMBER CODE

Number of poles Enter 02 - 12

Screw fixing Leave blank Catch pin fixing Enter RZ

Nylon 6, V2 Leave blank Nylon 6.6, V0 Enter T

A B K 64

ABK SERIES

+ 44 (0) 1273 431600

- - - - - -

5 0 0 Z E L

+44 (0) 1273 439288

- - - - - - sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 1000 25A - 41A terminal blocks - standard base

TYPE MDS

Length = number of poles x 12 less 4.5mm

FEATURES

Approvals

Series 1000 terminal blocks are available in 3 grades of housing material, nylon 6, nylon 6.6 (H type) and nylon 6.6 (T type) which is suitable for high temperature applications. Two variations of wire protectors are offered, type HDS have standard protectors and type MDS have barrier inserts. Versions without wire protectors are also offered with barriers in inserts (type SL). Captive screws are fitted as standard.

Nominal Cross-Section mm2

6.0

22-10 AWG 40A

22-10 AWG 25A

6.0

6.0

6.0

6.0

6.0

6.0

6.0

6.0

Voltage Rating

500

150/250

300

500

500

500

500

500

500

500

500

V

TECHNICAL DETAILS Mouldings:

Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V2 nylon 6.6, natural, UL94 V2 (H) nylon 6.6, brown, UL94 V0 (T) brass, tinned M3.5 steel, zinc plated, chromed max: 0.8 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 25A to EN 60 998: 41A see approvals 10.0mm2 7.5mm - 8mm

OPTIONS Marking: special printing available. Please provide sketch.

PART NUMBER CODE

Cut lengths: standard 12 pole lengths can be cut to shorter lengths. Covers: series ABK406 - see page 63.

Without protectors Leave blank With barrier inserts Enter SL With std protectors Enter HDS With barrier protectors Enter MDS

Number of poles Enter 02 - 12

Nylon 6, V2 Leave blank Nylon 6.6, V2 Enter H Nylon 6.6, V0 Enter T

1 0 0 0 + 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

65


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 1000K 25A - 41A terminal blocks - raised base

TYPE MDS

Length = number of poles x 12 less 4.5mm

FEATURES

Approvals

Series 1000K terminal blocks are available in 3 grades of housing material, nylon 6, nylon 6.6 (H type) and nylon 6.6 (T type) which is suitable for high temperature applications. Two types of wire protectors are offered, type HDS have standard protectors and type MDS have barrier inserts. Versions without wire protectors are also offered with barriers in inserts-type SL. They are raised base for applications where creepage and clearance distances must be observed.

Nominal Cross-Section mm2

6.0

22-10 AWG 40A

22-10 AWG 25A

6.0

6.0

6.0

6.0

6.0

6.0

6.0

6.0

Voltage Rating

500

150/250

300

500

500

500

500

500

500

500

500

V

TECHNICAL DETAILS Mouldings:

Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V2 nylon 6.6, natural, UL94 V2 (H) nylon 6.6, brown, UL94 V0 (T) brass, tinned M3.5 steel, zinc plated, chromed max: 0.8 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 25A to EN 60 998: 41A see approvals without wire protectors: 10mm2 with wire protectors: 4mm2 7.5mm - 8mm

OPTIONS PART NUMBER CODE

Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

Without protectors Leave blank With barrier inserts Enter SL With std protectors Enter HDS With barrier protectors Enter MDS

Number of poles Enter 02 - 12

1 0 0 0 K 66

+ 44 (0) 1273 431600

Covers: series ABK406 - see page 63.

Nylon 6, V2 Leave blank Nylon 6.6, V2 Enter H Nylon 6.6, V0 Enter T

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 324 26A terminal blocks - standard & raised base STANDARD BASE (324)

RAISED BASE (324FU)

All other dimensions for type 324FU are as per standard base drawing.

Length = number of poles x 11.5 less 2.5mm

FEATURES

Approvals

Series 324 terminal blocks are available in standard base and also raised base (suffixed FU). The raised base versions are particularly suitable to obtain required minimum creepage and clearance distances when mounting on noninsulating surfaces. Supplied with or without wire protectors. Captive screws are fitted as standard.

Nominal Cross-Section mm2

2.5

22-8 AWG 35A

22-8 AWG 10A

22-10 AWG 40A

22-10AWG 10A

Voltage Rating

400

300

300

300

300

B

D

B

D, E

V

Application Group

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V2 brass, tinned M3.5 steel, zinc plated, blue passivated max: 0.8 Nm max short term: 140ยบ C continuous: 105ยบ C 26A see approvals 2 x 2.5mm2 7mm

OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths. Housings: also available in higher grade nylon materials.

PART NUMBER CODE

Without protectors Enter WE With protectors Enter HDS Standard base Leave blank Raised base Enter FU

Number of poles Enter 02 - 12

3 2 4 + 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

67


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 1500 32A terminal blocks - heavy duty

Length = number of poles x 13.5 less 4.1mm

FEATURES

Approvals

Series 1500 terminal blocks are particularly suitable for use in water heaters, shower units and all heavy duty applications. Raised base versions are unnecessary as they meet the minimum 8mm creepage and clearance distance. Supplied with or without wire protectors. Captive screws are fitted as standard. Complies to VDE 0700 (EN 60 335-1), VDE 0711(EN 60 598-1) & VDE 0613 (EN 60 998) if used in equipment rated up to 32 amp.

Nominal Cross-Section mm2

10.0

18-8 AWG 40A

18-8 AWG 55A

10.0

10.0

10.0

10.0

10.0

10.0

10.0

Voltage Rating

500

300

300

500

500

500

500

500

500

500

V

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V2 brass, tinned M4 steel, zinc plated, chromed max: 1.2 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 32A to EN 60 998: 57A see approvals without wire protectors: 16.0mm2 with wire protectors: 6mm2 8mm

OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

PART NUMBER CODE

Housings: also available in higher grade nylon materials. Covers: series ABK415 - see page 63.

Number of poles Enter 02 - 12 Without protectors Leave blank With protectors Enter HDS

1 5 0 0 68

+ 44 (0) 1273 431600

- - - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 2000 40A terminal blocks - heavy duty - standard & raised base

Length = number of poles x 14.5 less 3.3mm

FEATURES

Approvals

Series 2000 terminal blocks are particularly suitable for use in water heaters, shower units and all heavy duty applications. They are available in standard base and raised base (suffixed K). The raised base versions are particularly suitable to obtain required minimum creepage and clearance distances when mounting on non-insulating surfaces. Supplied with or without wire protectors. Captive screws are fitted as standard. Complies to VDE 0700 (EN 60 335-1), VDE 0711(EN 60 598-1) & VDE 0613 (EN 60 998) if used in equipment rated up to 40 amp.

Nominal Cross-Section mm2

16.0

14-6 AWG 65A

22-6 AWG 70A

16.0

16.0

16.0

16.0

16.0

16.0

Voltage Rating

500

600

300

500

500

500

500

500

500

V

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V2 brass, tinned M5 steel, zinc plated, chromed max: 2.0 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 40A to EN 60 998: 76A see approvals without wire protectors: 16mm2 with wire protectors: 10mm2 2 2 10mm - 10.5mm

OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

PART NUMBER CODE

Housings: also available in higher grade nylon materials.

Without protectors Leave blank With protectors Enter HDS

Standard base Leave blank Raised base Enter K

Number of poles Enter 02 - 12

2 0 0 0 + 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

69


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 326 61A terminal blocks - heavy duty

Length = number of poles x 14.5 less 3mm

FEATURES Approvals

Series 326 terminal blocks are suitable for very heavy duty applications and are available with and without wire protectors. Captive screws are fitted as standard.

Nominal Cross-Section mm2

Voltage Rating

V

16.0

14-8 AWG 50A

14-8 AWG 55A

16.0

10.0

10.0

500

300

300

380

500

500

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V0 brass, tinned M4 steel, zinc plated, blue passivated max: 1.2 Nm max short term: 140ยบ C continuous: 105ยบ C 61A see approvals without wire protectors: 16mm2 with wire protectors: 10mm2 2 9mm

OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths. PART NUMBER CODE

Without protectors Enter WE With protectors Enter HDS

Number of poles Enter 02 - 12

3 2 6 70

- - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Terminal blocks - strip type SERIES 327 82A terminal blocks - heavy duty - standard & raised base STANDARD BASE

RAISED BASE

Length = number of poles x 14.5 less 3mm

FEATURES

Approvals

Series 327 terminal blocks are suitable for very heavy duty applications. Supplied in standard profile and raised base (suffixed FU) for applications where creepage and clearance distances must be observed. They are available with or without wire protectors. Captive screws are fitted as standard.

14-4

14-6

Nominal Cross-Section mm2

16.0

AWG 80A

AWG 80A

16.0

16.0

16.0

Voltage Rating

500

300

300

380

500

500

V

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length:

nylon 6, natural, UL94 V0 brass, tinned M5 steel, zinc plated, blue passivated max: 2.0 Nm max short term: 140ยบ C continuous: 105ยบ C 82A see approvals without wire protectors: 16mm2 with wire protectors: 10mm2 2 9mm

OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths. PART NUMBER CODE Without protectors Standard profile Enter WE Without protectors raised profile Leave blank Without protectors Enter HDS Standard base Leave blank Raised base Enter FU

Number of poles Enter 02 - 12

3 2 7 + 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

71


Electromechanical Terminal Blocks

Fused terminal blocks SERIES 403SI Fused terminal blocks - 20mm x 5mm fuses

FEATURES

*

Approvals

Series 403SI fused terminal blocks are available in un-earthed versions from 1 to 5 poles, and earthed versions from 3 to 5 poles. All variations can be supplied with or without wire protectors.

Nominal Cross-Section mm2

2.5

2.5

2.5

Voltage Rating

400

400

400

V

* Not “E” types

Earth Screws & Washers (Optional) Screws: 403SIES - M3 x 10, Posi Washers: 503SITW - M3

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: Wire stripping length: Fuse size: Tracking resistance:

polyamide 6.6(PA6/6), white, UL94 V2, (fuseholder black) brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm max short term: 160º C continuous: 100º C 10A terminal blocks: 400v fuseholders: 250v without wire protectors: up to 6mm2 with wire protectors: up to 2.5mm2 2 2 7mm - 7.5mm 20mm x 5mm CTI > 600

OPTIONS PART NUMBER CODE

Marking: special printing available. Please provide sketch. Fuses: see catalogue 2, page 102 for details.

With earth 3 pole only Enter E Without earth Leave blank

Number of poles Enter 01 - 05

Without protectors Leave blank With protectors Enter DS

4 0 3 S I 72

+ 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Fused terminal blocks SERIES 503SI Fused terminal blocks - 20mm x 5mm fuses

FEATURES Approvals

Series 503SI fused terminal blocks are available in unearthed versions from 1 to 5 poles and earthed versions from 3 to 5 poles. A common dovetail enables mixed assemblies to be constructed by clipping on additional 1 pole lengths to provide multiple versions of fused and unfused terminals. All variations can be supplied with or without wire protectors.

2.5

22-12 AWG 10A

22-12 AWG 10A

2.5

2.5

2.5

2.5

2.5

400

300

300

400

400

400

400

400

Nominal Cross-Section mm2

Voltage Rating

V

TECHNICAL DETAILS Mouldings:

Earth Screws & Washers (Optional) Screws: 503SIES - M3x12, Posi Washers: 503SITW - M3

Inserts: Screws: Screw tightening torque: Temp. limits: Current rating:

Voltage rating: Conductor size: Wire stripping length: Fuse size: Fixing centres:

PART NUMBER CODE

OPTIONS

With earth Enter E Without earth Leave blank

Number of poles Enter 01 - 05

nylon 6.6(PA6/6), grey, UL94 V2, (fuseholder black) brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 127-6: fuseholders: 10A to EN 60 335-1: terminal blocks: 10A to EN 60 598: terminal blocks: 16A to EN 60 998: terminal blocks: 24A terminal blocks: 380v fuseholders: 250v without wire protectors: up to 6mm2 with wire protectors: up to 2.5mm2 7mm2 - 7.5mm2 20mm x 5mm peg to earth screw: 15mm peg to fixing hole: 20mm

Marking: special printing available. Please provide sketch. Without protectors Leave blank With protectors Enter DS

5 0 3 S I + 44 (0) 1273 431600

Covers: see page 73. Fuses: see catalogue 2, page 102 for details. High temperature: details on request.

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

73


Electromechanical Terminal Blocks

Fused terminal blocks SERIES ABK503 Covers for fused terminal blocks

Dimension L 2 pole - 13.5m 3 pole - 24mm 4 pole - 33.5mm 5 pole - 43mm

FEATURES

TECHNICAL DETAILS

Series ABK503 covers are specifically for fitting on to series 503SI fused terminal blocks (see page 72) and are available in either standard Nylon 6.6 or moulded high temperature material for high ambient heat applications. Available in 3, 4 and 5 pole versions.

Mouldings: ABK standard material: ABK (T) high temperature: Maximum working temp: ABK standard material: ABK (T) high temperature:

nylon 6.6, grey, UL94 V2 Technyl A20 V25, brick red, UL94 V0 100ยบ C continuous 165ยบ C continuous

PART NUMBER CODE

Number of poles Enter 03, 04 or 05

Standard nylon 6.6 Leave blank High temperature Enter T

A B K 5 0 3 60 74

+ 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Fused terminal blocks SERIES 1003SI Fused terminal blocks - 1” x 1/4” fuses

FEATURES

Approvals

Series 1003SI fused terminal blocks are available in unearthed versions from 1 to 5 poles and earthed versions from 3 to 5 poles. A common dovetail enables mixed assemblies to be constructed by clipping on additional 1 pole lengths to provide multiple versions of fused and unfused terminals. All variations can be supplied with or without wire protectors.

Nominal Cross-Section mm2

4.0

22-10 AWG 16A

6.0

Voltage Rating

500

300

400

V

TECHNICAL DETAILS Mouldings:

Earth Screws & Washers (Optional) Screws: 1003SIES - M3.5x12, Posi Washers: 1003SITW - M3.5

Inserts: Screws: Screw tightening torque: Temp. limits: Current rating:

Voltage rating: Conductor size: Wire stripping length: Fuse size: Fixing centres:

PART NUMBER CODE

OPTIONS

With earth Enter E Without earth Leave blank

Number of poles Enter 01 - 05

1 0 0 3 S I + 44 (0) 1273 431600

nylon 6.6, grey, UL94 V2, (fuseholder black) brass, tinned M3.5 steel, zinc plated, chromed max: 0.8 Nm max short term: 160º C continuous: 100º C to EN 60 127-6: fuseholders: 16A to EN 60 335-1: terminal blocks: 16A to EN 60 598: terminal blocks: 25A to EN 60 998: terminal blocks: 32A terminal blocks: 500v fuseholders: 250v without wire protectors: up to 10mm2 with wire protectors: up to 4mm2 2 2 7.5mm - 8.0mm 1” x 1/4” or 1.1/4” x 1/4” peg to earth screw: 18mm peg to fixing hole: 24mm

Marking: special printing available. Please provide sketch. Without protectors Leave blank With protectors Enter DS

Fuses: see catalogue 2, page 102 for details. High temperature: details on request.

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 75


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 90007 16A terminal blocks - screw/screwless 90007

90007RZ

Dimension a Number of poles x 10, less 2.4mm Dimension b Number of poles x 10 less 10mm

FEATURES

Approvals

Series 90007 provide screw terminals on one side of the connector with two screwless terminals per pole on the opposite side. They are particularly suitable for lighting equipment applications. This range can be supplied for either panel mounting with fixing screws or types suffixed RZ have self fixing catch pins as illustrated and are suitable for plates of 0.5 1.4mm thickness. Both types are available with or without wire protectors. Please note. Either solid or tinned stranded conductors should be used in the screwless terminals.

Nominal Cross-Section mm2 Screwless terminals

1.5

20-16 AWG 10A

2.5

1.5

1.5

1.5

Nominal Cross-Section mm2 Screw terminals

2.5

18-14 AWG 10A

2.5

2.5

2.5

2.5

Voltage Rating

450

300

400

400

400

400

V

TECHNICAL DETAILS Mouldings: Inserts: Clamping springs: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: screw terminals: with wire protectors: screwless terminals: Wire stripping length: screw terminals: screwless terminals:

PART NUMBER CODE Number of poles Enter 01 - 12

polyamide 6/6, white steel, tinned stainless spring steel M3 steel, zinc plated, chromed max: 0.8 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 16A to EN 60 998: 17.5A see approvals up to 6mm2 up to 2.5mm2 0.5mm2 - 1.5mm2 8mm - 8.5mm 7mm - 7.5mm

OPTIONS Screw fixing Leave blank Catch pin fixing Enter RZ

9 0 0 0 7 60 76

+ 44 (0) 1273 431600

Without protectors Leave blank With protectors Enter DS

Marking: alpha numeric or special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 90008 16A terminal blocks - screw/screwless

Dimension b Number of poles x 10 less 10mm

FEATURES

Approvals

Series 90008 provide screw terminals on one side of the connector with two screwless terminals per pole on the opposite side. They have a slotted base to allow quick fixing onto pre-formed tags and are particularly suitable for lighting equipment applications.

Nominal Cross-Section mm2 Screwless terminals

1.5

1.5

1.5

2.5

2.5

2.5

Please note. Either solid or tinned stranded conductors should be used in the screwless terminals.

Nominal Cross-Section mm2 Screw terminals Voltage Rating

450

400

400

V

TECHNICAL DETAILS Mouldings: Inserts: Clamping springs: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: screw terminals: with wire protectors: screwless terminals: Wire stripping length: screw terminals: screwless terminals:

PART NUMBER CODE

Number of poles Enter 01 - 12

polyamide 6/6, white steel, tinned stainless spring steel M3 steel, zinc plated, chromed max: 0.8 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 16A to EN 60 998: 17.5A see approvals up to 6mm2 up to 2.5mm2 0.5mm2 - 1.5mm2 8mm - 8.5mm 7mm - 7.5mm

OPTIONS Marking: alpha numeric or special printing available. Please provide sketch.

Without protectors Leave blank With protectors Enter DS

9 0 0 0 8 + 44 (0) 1273 431600

Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 77


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 900Q 16A terminal blocks - screw/screwless 900Q

900QRZ

Dimension a Number of poles x 10 less 2.4mm Dimension b Number of poles x 10 less 10mm

FEATURES

Approvals

Series 900Q provide screw terminals on one side of the connector with four screwless terminals per pole on the opposite side. They are particularly suitable for lighting equipment applications. This range can be supplied for either panel mounting with fixing screws or types suffixed RZ have self fixing catch pins as illustrated, suitable for use with plates of 0.5 1.4mm thickness. Both types are available with or without wire protectors. Please note. Either solid or tinned stranded conductors should be used in the screwless terminals.

Nominal Cross-Section mm2 Screwless terminals

1.5

1.5

Nominal Cross-Section mm2 Screw terminals

2.5

2.5

Voltage Rating

450

400

V

TECHNICAL DETAILS Mouldings: Inserts: Clamping springs: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: screw terminals: with wire protectors: screwless terminals: Wire stripping length: screw terminals: screwless terminals:

PART NUMBER CODE

Number of poles Enter 01 - 12

nylon 6.6, (PA6/6), white steel, tinned stainless spring steel M3 steel, zinc plated, chromed max: 0.8 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 16A to EN 60 998: 17.5A see approvals up to 6mm2 up to 2.5mm2 0.5mm2 - 1.5mm2 8mm - 8.5mm 7mm - 7.5mm

OPTIONS Screw fixing Leave blank Catch pin fixing Enter RZ

Marking: alpha numeric or special printing available. Please provide sketch.

Without protectors Leave blank With protectors Enter DS

Cut lengths: standard 12 pole lengths can be cut to shorter lengths. 900QLRZ: for plates of 1.5mm - 2.4mm - quotation on request.

9 0 0 Q 60 78

+ 44 (0) 1273 431600

- - - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 900ED/EDP 16A terminal blocks - screw/screwless 900EDP

900ED

900ED hole pattern

FEATURES

Approvals

Series 900ED have self fixing catch pins (see hole pattern) suitable for plates of 0.6mm to 1mm thick. Mains connection is made by screw terminals on one side and the opposite side has two screwless connections per port in poles 1 and 3. The centre pole is screw to screw fixing with earth marking. Series 900EDP are for screw or rivet fixing size ø3mm. Mains connection is made by screw terminals on one side and the opposite side has two screwless connections per port in poles 1 and 3. The centre pole is screw to screw fixing with earth marking. Please note. Either solid or tinned stranded conductors should be used in the screwless terminals.

Nominal Cross-Section mm2 Screwless terminals

1.0

1.0

Nominal Cross-Section mm2 Screw terminals

2.5

2.5

Voltage Rating

450

400

V

TECHNICAL DETAILS Mouldings: Inserts: screw/screwless: screw/screw: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: screw terminals: screwless terminals: Wire stripping length: screw terminals: screwless terminals:

PART NUMBER CODE

polyamide 6, (PA6/6), natural steel, tinned brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm max short term: 160º C continuous: 100º C to EN 60 598: 6A to EN 60 998: 13.5A see approvals up to 6mm2 0.5mm2 - 1mm2 8mm - 8.5mm 7mm - 7.5mm

OPTIONS Marking: special printing available. Please provide sketch. Strain reliefs: type 900EQZEL, see page 80.

Catch pin fixing Leave blank Screw fixing Enter RZ

9 0 0 ED

0 3 - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 79


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 900EQ 16A terminal blocks - screw/screwless

Hole pattern

FEATURES

Approvals

Series 900EQ are a one piece three pole connector. Mains connection is made by screw terminals on one side for wires up to 4 mm2. The opposite side has four screwless connections in poles 1 and 3. The centre pole is screw to screw fixing with earth marking. Series 900EQA are of the same design as above but incorporate an interlocking facility on one side to enable the user to extend to any required combination by adding further modular components from the range available (see options). Please note. Either solid or tinned stranded conductors should be used in the screwless terminals.

Nominal Cross-Section mm2 Screwless terminals

1.0

1.0

Nominal Cross-Section mm2 Screw terminals

2.5

2.5

Voltage Rating

450

400

V

TECHNICAL DETAILS Mouldings: Inserts: screw/screwless: screw/screw: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: screw terminals: screwless terminals: Wire stripping length: screw terminals: screwless terminals:

PART NUMBER CODE

polyamide 6, natural steel, tinned brass, tinned M3 steel, zinc plated, chromed max: 0.5 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 6A to EN 60 998: 13.5A see approvals up to 6mm2 0.5mm2 - 1.0mm2 8mm - 8.5mm 7mm - 7.5mm

OPTIONS One pole connectors: 900QA, see page 81. Fused connectors: 900/925SI, see pages.82-85.

One piece connector Leave blank Interlocking connector Enter A

9 0 0 EQ 60 80

Strain reliefs: type 900EQZEL, see page 80.

0 3 - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 900EQ Strain reliefs

900EQZEL

FEATURES

TECHNICAL DETAILS

Series 900EQ are strain reliefs which are suitable for use with 900EQ series base connectors, types 900ED (page 78) and 900EQ/EQA (page 79). The connector is clipped onto the base of the strain relief and the clamping mechanism can be pushed down to tighten or can be released by pressing apart the outer catch springs on either side. They are supplied with moulded catch pins for fixing to base plates 0.6mm -1mm.

Mouldings: Temp. limits: Conductor size:

Hole pattern

polyamide 6.6, white max short term: 160ยบ C continuous: 100ยบ C ร˜ 6.5mm - 12mm

PART NUMBER CODE

9 0 0 EQ Z E L - - - - - - + 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 81


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 900QA 16A terminal blocks - screw/screwless 900QA01

900QA01SK

FEATURES

Approvals

Series 900QA are a single pole connector with a dovetail on both sides which can be interlocked with base connectors and fused connectors (see options). Mains connection is made by a screw terminal on one side and the opposite side has four screwless terminals. As they are interlockable they cannot be fixed on their own and must be used in conjunction with their mating parts. Available with or without marking. These connectors can also be supplied with an inserted earthing terminal (suffixed SK) fixed by means of a self tapping screw. Please note. Either solid or tinned stranded conductors should be used in the screwless terminals.

Nominal Cross-Section mm2 Screwless terminals

1.0

1.0

Nominal Cross-Section mm2 Screw terminals

2.5

2.5

Voltage Rating

450

400

V

TECHNICAL DETAILS Mouldings: Inserts: Clamping springs: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Conductor size: screw terminals: screwless terminals: Wire stripping length: screw terminals: screwless terminals:

PART NUMBER CODE

polyamide 6, natural steel, tinned stainless spring steel M3 steel, zinc plated, chromed max: 0.8 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 6A to EN 60 998: 13.5A see approvals up to 6mm2 0.5mm2 - 1.0mm2 8mm - 8.5mm 7mm - 7.5mm

OPTIONS Without marking Enter 01 With marking L1 Enter L1 With marking L2 Enter L2

Base connectors: type 900EQA, see page 79. Without earth terminals Leave blank With earth terminals Enter SK

9 0 0 QA 60 82

+ 44 (0) 1273 431600

Fused connectors: type 900SI, see pages 82 & 83. Earth terminals: also available with SK earth.

- - - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 900SI Fused terminal block assemblies

FEATURES

Approvals

Series 900SI assemblies are created by using fused terminal block type 900SI01 (panel mounting) or 900SIRZ01(with catch pins), interlocked with type 900QA01 modules, various lengths of fused terminal blocks can be assembled. Additionally earth tags (type SL90022) can be fitted into the screwless ports to provide a screw earth connection.

Nominal Cross-Section mm2 Screwless terminals

1.5

1.5

Nominal Cross-Section mm2 Screw terminals

4.0

4.0

Voltage Rating

450

250/400

V

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Contacts for fuses: Clamping springs: Temp. limits: Current rating: Voltage rating: Conductor size: screw terminals: screwless terminals: Wire stripping length: screw terminals: screwless terminals:

PART NUMBER CODE

Number of poles

polyamide 6/6, white steel, tinned M3 steel, zinc plated, chromed max: 0.8 Nm stainless spring steel stainless spring steel max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 6A to EN 60 998: 13.5A see approvals up to 6mm2 0.5mm2 - 1.5mm2 8mm - 8.5mm 7mm - 7.5mm

OPTIONS Screw fixing Leave blank Catch pin fixing Enter RZ

Assemblies can consist of any number of fused and unfused poles. The fused poles can be at either end or in the middle of assemblies.

Unearthed Leave blank Earthed Enter E

9 0 0 S I + 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 83


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 900SI Fused terminal blocks - screw/screwless - 20mm x 5mm fuses

FEATURES

Approvals

Series 900SI are provided with screw terminals on one side of the connector with four screwless terminals per pole on the opposite side and are fitted with an integral fuseholder suitable for 20 x 5mm fuses. The one pole version has a dovetail on either side enabling the user to interlock additional fuseholders or other modular components (see options). This range can be supplied for either panel mounting with fixing screws or types suffixed RZ have self fixing catchpins for plates of 0.6mm - 1mm as illustrated. Please note. Either solid or tinned stranded conductors should be used in the screwless terminals.

Nominal Cross-Section mm2 Screwless terminals

1.5

1.5

Nominal Cross-Section mm2 Screw terminals

4.0

4.0

Voltage Rating

450

250/400

V

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Contacts for fuses: Clamping springs: Temp. limits: Current rating: Voltage rating: Conductor size: screw terminals: screwless terminals: Wire stripping length: screw terminals: screwless terminals:

PART NUMBER CODE

polyamide 6/6, white, UL94 V2 steel, tinned M3 steel, zinc plated, chromed max: 0.8 Nm stainless spring steel stainless spring steel max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 6A to EN 60 998: 13.5A see approvals up to 6mm2 0.5mm2 - 1.5mm2 8mm - 8.5mm 7mm - 7.5mm

OPTIONS One piece connectors: type 900QA, see page 81.

Screw fixing Leave blank Catch pin fixing Enter RZ

Base connectors: type 900EQA, see page 79. Fuses: see catalogue 2, page 102 for details. Assemblies: see page 82.

9 0 0 S I 60 84

0 1 - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 925SI Fused terminal block assemblies

FEATURES

Approvals

Series 925SI assemblies are created by using fused terminal block type 925SI01 (panel mounting) or 925SIRZ01 (with catch pins), interlocked with type 900QA01 modules, various lengths of fused terminal blocks can be assembled. Additionally earth tags (type SL90022) can be fitted into the screwless ports to provide a screw earth connection.

Nominal Cross-Section mm2 Screwless terminals

1.5

Nominal Cross-Section mm2 Screw terminals

4.0

Voltage Rating

V

250/400

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Contacts for fuses: Clamping springs: Temp. limits: Current rating: Voltage rating: Conductor size: screw terminals: screwless terminals: Wire stripping length: screw terminals: screwless terminals:

PART NUMBER CODE

Number of poles

Screw fixing Leave blank Catch pin fixing Enter RZ

+ 44 (0) 1273 431600

up to 6mm2 0.5mm2 - 1.5mm2 8mm - 8.5mm 7mm - 7.5mm

OPTIONS Assemblies can consist of any number of fused and unfused poles. The fused poles can be at either end or in the middle of assemblies.

Unearthed Leave blank Earthed Enter E

9 2 5 S I

polyamide 6/6, white steel, tinned M3.5 steel, zinc plated, chromed max: 0.8 Nm stainless spring steel stainless spring steel max short term: 160ยบ C continuous: 100ยบ C to EN 60 127: 6.3A fuse holders: 250v

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 85


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 925SI Fused terminal blocks - screw/screwless - 1” x 1/4” fuses

FEATURES

Approvals

Series 925SI are provided with screw terminals on one side of the connector with four screwless terminals per pole on the opposite side and are fitted with an integral fuseholder suitable for 1" x 1/4" fuses. The one pole version has a dovetail on either side enabling the user to interlock additional fuseholders or other modular components (see options). This range can be supplied for either panel mounting with fixing screws or types suffixed RZ have self fixing catch pins for plates of 0.6mm - 1mm as illustrated. Please note. Either solid or tinned stranded conductors should be used in the screwless terminals.

Nominal Cross-Section mm2 Screwless terminals

1.5

Nominal Cross-Section mm2 Screw terminals

4.0

Voltage Rating

V

250/400

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Contacts for fuses: Clamping springs: Temp. limits: Current rating: Voltage rating: Conductor size: screw terminals: screwless terminals: Wire stripping length: screw terminals: screwless terminals:

PART NUMBER CODE

polyamide 6/6, white, UL94 V2 steel, tinned M3.5 steel, zinc plated, chromed max: 0.8 Nm stainless spring steel stainless spring steel max short term: 160º C continuous: 100º C to EN 60 127: 6.3A fuse holders: 250v up to 6mm2 0.5mm2 - 1.5mm2 8mm - 8.5mm 7mm - 7.5mm

OPTIONS One piece connectors: type 900QA, see page 81. Base connectors: type 900EQA, see page 79.

Screw fixing Leave blank Catch pin fixing Enter RZ

9 2 5 S I 60 86

Fuses: see catalogue 2, page 102 for details. Assemblies: see page 85.

0 1 - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 810 10A terminal blocks - screwless

FEATURES

Approvals

Series 810 are low profile screwless connectors with no release keys. To release the conductor from the clamp, a screwdriver can be inserted into the appropriate opening to depress the spring clip. Please note. Either solid or tinned stranded conductors should be used in screwless terminals.

Nominal Cross-Section mm2

1.5

18-16 AWG 6A

18-16 AWG 6A

1.5

1.5

1.5

Voltage Rating

380

300

300

380

380

380

V

TECHNICAL DETAILS Mouldings: Inserts: Temp. limits:

polyamide, UL94 V2 brass, tinned max short term: 140ยบ C continuous: 105ยบ C Current rating: 10A Voltage rating: 380v ~ to DIN VDE 0110 Conductor size: 2 x 1.5mm2 Conductor stripping length: 7.5mm - 8mm OPTIONS Marking: special printing available. Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths.

PART NUMBER CODE

Number of poles Enter 02 - 12

8 1 0

- - - - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 87


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 930 10A terminal blocks - screwless

FEATURES

Approvals

Series 930 are screwless connectors with two ports per pole on each side and are available with 3 push button options. Type 930-00 have no push buttons, conductors are released by use of a screwdriver. Type 930-01 have push button release on one side only. Type 930-02 have push button release on both sides. There is an additional connection for 1 x 0.5mm2 conductor on one side of each pole for internal wiring (eg. interference capacitor). Please note. Either solid or tinned stranded conductors should be used in the screwless terminals.

Nominal Cross-Section mm2

2.5

20-14 AWG 16A

20-16 AWG 10A

2.5

2.5

Voltage Rating

450

300

300

400

400

V

TECHNICAL DETAILS Mouldings: Inserts: Temp. limits:

nylon 6.6, white, UL94 V2 brass, tinned max short term: 160ยบ C continuous: 100ยบ C Current rating: to EN 60 598: 16A to EN 60 998: 24A Voltage rating: 380v ~ Conductor size: side 1: 0.5mm2 - 2.5mm2 side 2: 0.5mm2 - 1.5mm2 Conductor stripping length: 8mm - 9mm OPTIONS Marking: special printing available (as photo). Please provide sketch. Cut lengths: standard 12 pole lengths can be cut to shorter lengths. Catch pins: part no. RS930 catch pins are available. Recommended hole size 3.2mm dia. Base thickness 0.5mm to 1.2mm.

PART NUMBER CODE

Without release key Enter 00 With two release keys Enter 02

Number of poles Enter 02 - 12

9 3 0 60 88

- - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 980 16A 3 pole terminal blocks - screwless WITH EARTH TAB - SCREW TYPE

FEATURES

Approvals

Series 98001 are 3 pole screwless connectors with 2 ports per pole on each side with the option of screw fixing or catch pin fixing (type RZ). There is an additional connection for 1 x 0.5mm2 conductor on one side of each pole for internal wiring (eg. interference capacitor).

Nominal Cross-Section mm2

2.5

2.5

20-14 AWG 16A

Voltage Rating

450

450

600

V

TECHNICAL DETAILS

The range has 4 earthing options: - without earthing tab (type B) - earthing tab screw (type SKB) - earth claw (type SUB) - earthing bow push-in (type STB) 3 pole are marked N,

WITH EARTH CLAW AND CATCH PINS

Mouldings:

nylon 6.6, white, UL94 V2 Glow wire test - EN 60 598: 960ยบ C Electro copper, plated max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 16A to EN 60 998: 24A see approvals

Inserts: Temp. limits:

, L as standard. Current rating: Voltage rating: Conductor size: External: Internal:

Stripping length:

2 x 0.5mm2 to 2.5mm2 1 x 0.5mm2 to 1.5mm2 1 x 0.5mm2 to 2.5mm2 1 x 0.5mm2 to 0.75mm2 (capacitor) conductors: 0.5mm2 to 1.0mm2: 8mm conductors: 1.5mm2 to 2.5mm2: 9mm capacitors: 0.5mm2 to 0.75mm2: 9mm

PART NUMBER CODE

OPTIONS Unmarked: unmarked also available. Details on request. No earth tab Enter B Screw earth Enter SKB Push-in earth Enter STB Claw earth Enter SUB

Screw fixing Leave blank Catch pins Enter RZ

9 8 0 0 1

0 3

+ 44 (0) 1273 431600

Longer lengths: for 4 & 5 pole versions please refer to pages 90 & 91. Strain relief cord grips: for types ZEL980 & ZEL100 please refer to page 92.

- - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 89


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 980 16A 4 pole terminal blocks - screwless

FEATURES

Approvals

Series 98001 are 4 pole screwless connectors with 2 ports per pole with the option of screw fixing or catch pin fixing (type RZ). There is an additional connection for 1 x 0.5mm2 conductor on one side of each pole for internal wiring (e.g. interference capacitor).

2.5

2.5

20-14 AWG 16A

Voltage Rating

450

450

600

V

TECHNICAL DETAILS

The range has 4 earthing options: - without earthing tab (type B) - earth tab screw (type SKB) - earth claw (type SUB) - earthing bow push-in type (type STB) They are marked N,

Nominal Cross-Section mm2

Mouldings:

nylon 6.6, white, UL94 V2 Glow wire test - EN 60 598: 960ยบ C Electro copper, plated max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 16A to EN 60 998: 24A see approvals

Inserts: Temp. limits:

, 1, 2 as standard. Current rating: Voltage rating: Conductor size: External: Internal:

Stripping length:

2 x 0.5mm2 to 2.5mm2 1 x 0.5mm2 to 1.5mm2 1 x 0.5mm2 to 2.5mm2 1 x 0.5mm2 to 0.75mm2 (capacitor) conductors: 0.5mm2 to 1.0mm2: 8mm conductors: 1.5mm2 to 2.5mm2: 9mm capacitors: 0.5mm2 to 0.75mm2: 9mm

PART NUMBER CODE

OPTIONS Unmarked: unmarked also available. Details on request. No earth tab Enter B Screw earth Enter SKB Push-in earth Enter STB Claw earth Enter SUB

Screw fixing Leave blank Catch pins Enter RZ

9 8 0 0 1 60 90

0 4

+ 44 (0) 1273 431600

Strain relief cord grips: see page 92.

- - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 980 16A 5 pole terminal blocks - screwless WITH EARTH TAB - SCREW TYPE

FEATURES

Approvals

Series 98001 are 5 pole screwless connectors with 2 ports per pole with the option of screw fixing or catch pin fixing (type RZ). There is an additional connection for 1 x 0.5mm2 conductor on one side of each pole for internal wiring (eg. interference capacitor).

Nominal Cross-Section mm2

2.5

2.5

20-14 AWG 16A

Voltage Rating

450

450

600

V

TECHNICAL DETAILS

The range has 4 earthing options: - without earthing tab (type B) - earthing tab screw (type SKB) - earth claw (type SUB) - earthing bow push in (type STB). 5 pole are marked 3, N,

WITH EARTH CLAW AND CATCH PINS

Mouldings:

nylon 6.6, white, UL94 V2 Glow wire test - EN 60 598: 960ยบ C Electro copper, plated max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 16A to EN 60 998: 24A see approvals

Inserts: Temp. limits:

,1, 2 as standard. Current rating: Voltage rating: Conductor size: External: Internal:

Stripping length:

2 x 0.5mm2 to 2.5mm2 1 x 0.5mm2 to 1.5mm2 1 x 0.5mm2 to 2.5mm2 1 x 0.5mm2 to 0.75mm2 (capacitor) conductors: 0.5mm2 to 1.0mm2: 8mm conductors: 1.5mm2 to 2.5mm2: 9mm capacitors: 0.5mm2 to 0.75mm2: 9mm

PART NUMBER CODE

OPTIONS Unmarked: unmarked also available. Details on request. No earth tab Enter B Screw earth Enter SKB Push-in earth Enter STB Claw earth Enter SUB

Screw fixing Leave blank Catch pins Enter RZ

9 8 0 0 1

0 5

+ 44 (0) 1273 431600

Shorter lengths: for 3 & 4 pole versions please refer to pages 89 & 90. Strain relief cord grips: for types ZEL980 & ZEL100 please refer to page 92.

- - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 91


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 980 16A terminal blocks - screwless

FEATURES 980 series terminal blocks are available in 3 and 5 pole lengths and provide screwless terminals on both sides with entry ports on the external side being controlled by push button levers. A 2.5 mm diameter test hole is provided for automatic testing. Disconnection is made by inserting a screwdriver or similar implement into the release hole. The clamping mechanism comprises of a three metal assembly:

SK earth tabs

ST earth tabs

q Plated Steel Frame q Electro Copper Busbar q Stainless Steel Clamping Bar This range is available with screw fixing or self locating catch pins and are supplied with marking as standard. Unmarked connectors can also be supplied if required.

SU earth tabs

Three earthing options are available:

60 92

q Type SK

Earthing tabs screw fixing to earth

q Type ST

Earthing bows Push in metal bow

q Type SU

Earthing claw Direct contact to earth

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Screwless terminal blocks SERIES 980ZEL Strain reliefs

ZEL980 WITH 980 CONNECTOR

Hole pattern RZ type

Hole pattern screw type

FEATURES

TECHNICAL DETAILS

Series ZEL strain reliefs are available in two versions.

Mouldings: Maximum working temp:

nylon 6.6, white, UL94 V2 100ยบ C

Type ZEL980 consists of a solid base on to which the 980 series 3, 4 or 5 pole connectors can be mounted, and includes a cable clip with a captive clamping mechanism. This product meets the tensile load specification of 80/120 N according to EN 60 598.

PART NUMBER CODE

Strain relief only Enter 100 For use with connector Enter 98035

Screw fixing Leave blank Catch pins Enter RZ

Z E L + 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 93


Electromechanical Terminal Blocks

Luminaire connecting system SERIES LCS 45 IP65 connection to closed luminaires

FEATURES

TECHNICAL DETAILS

Series LCS 45 is a compact 3 pole unit for the connection of mains supply to luminaires up to IP 65 rating. The unit consists of a slide in connector including internal and external push in contacts of up to 3 x 2.5mm2, a collet nut with cable entry, as well as a housing seal. It can also be supplied with a built in strain relief. It is designed to be used with luminaires utilising 1mm - 4mm wall thickness and requires a hole diameter of 21mm in the luminaire.

Mouldings: Contacts: Clamping springs: Temp. limits: Current rating: Voltage rating: Conductor size: Dismantling length: Wire stripping length: Cable diameter:

60 94

+ 44 (0) 1273 431600

+44 (0) 1273 439288

polyamide 6/6, UL94 V2, white electro-copper, plated Stainless spring steel max short term: 160ยบ C continuous: 100ยบ C to EN 60 598: 16A to EN 60 998: 24A 450v external: 2 x 0.5mm2 - 2.5mm2 per pole internal: 2 x 0.5mm2 - 2.5mm2 per pole 40mm 0.5mm2 - 1mm2: 8mm 1.5mm2 - 2.5mm2: 9mm 6mm to 10.5mm

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Steatite terminal blocks SERIES 338 - 342 34A steatite terminal blocks 340

338F

338

339KF 342

340F FEATURES

TECHNICAL DETAILS

Steatite terminal blocks are suitable for heavy duty applications where thermoplastic materials would not have sufficient heat resistance capabilities. The 338-342 series have a current rating of 34 amp. The screw terminals are grooved to allow simple connection without the need for any special preparation of the conductors. Please refer to order box for available lengths.

Mouldings: Terminal body: Screws: Temp. limits: Current rating: Voltage rating: Conductor size: Stripping length:

steatite KER 220, DIN 40685, white brass, nickel plated M4 steel, zinc plated, blue passivated max upper limit: 200º C 34A 400v up to 6mm2 10mm

OPTIONS Standard versions have two outside mounting holes. K versions have two central mounting holes. F versions are additionally fitted with spring washers to DIN 127 and plain washers. Part No

+ 44 (0) 1273 431600

Poles

Conductor size mm² without cable lug

Conductor size mm² with cable lug

Dimensions mm

Voltage

Current

338

1

4

6

44x14x19

400

34

338F

1

4

6

44x14x21

400

34

339K

2

4

6

33x24x18

400

34

339KF

2

4

6

33x24x20

400

34

340

3

4

6

66x24x18

400

34

340F

3

4

6

66x24x20

400

34

342

6

4

6

108x24x18

400

34

342F

6

4

6

108x24x20

400

34

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 95


Electromechanical Terminal Blocks

Steatite terminal blocks SERIES 359 - 363 44A steatite terminal blocks 360KF

361

360K

363

FEATURES

TECHNICAL DETAILS

Steatite terminal blocks are suitable for heavy duty applications where thermoplastic materials would not have sufficient heat resistance capabilities. The 359-363 series have a current rating of 44 amp. The screw terminals are grooved to allow simple connection without the need for any special preparation of the conductors. Please refer to order box for available lengths.

Mouldings: Terminal body: Screws: Temp. limits: Current rating: Voltage rating: Conductor size: Stripping length:

steatite KER 220, DIN 40685, white brass, nickel plated M5 steel, zinc plated, blue passivated max upper limit: 200º C 44A 500v up to 10mm2 10mm

OPTIONS Standard versions have two outside mounting holes. K versions have two central mounting holes. F versions are additionally fitted with spring washers to DIN 127 and plain washers. Part No

60 96

+ 44 (0) 1273 431600

Poles

Conductor size mm² without cable lug

Conductor size mm² with cable lug

Dimensions mm

Voltage

Current

359

1

6

10

44x14x22

500

44

359F

1

6

10

44x14x24

500

44

360K

2

6

10

39x28x20

500

44

360KF

2

6

10

39x28x22

500

44

361

3

6

10

72x28x22

500

44

361F

3

6

10

72x28x24

500

44

362

4

6

10

90x28x22

500

44

362F

4

6

10

90x28x24

500

44

363

6

6

10

126x28x22

500

44

363F

6

6

10

126x28x24

500

44

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Porcelain terminal blocks SERIES 103 Porcelain connectors - 2 and 3 pole without wire protector, 16mm2 1034

FEATURES

1036

Nominal Cross-Section mm2

6,0

Voltage Rating

450

Series 103... V

TECHNICAL DETAILS Connection: Fixing: Mouldings:

Contacts: Screws: Current rating: Stripping length:

screw conductor size 0.5mm2 -16mm2 by screw or rivet size ร˜ 4.5mm porcelain C 111 EN 60672 glazed porcelain, white, except lower surface continuous working temperature 1000 ยบC brass, plated, continuous working temperature 350 ยบC M4: max. 1.2 Nm steel, zinc plated, chromed to EN 60 598: 41A at T 100 ยบC to EN 60 998: 41A at T 100 ยบC 9.5mm - 10mm

PART NUMBER CODE

For 2 pole Enter 4 For 3 pole Enter 6

1 0 3

- - - - - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60 97


Electromechanical Terminal Blocks Porcelain terminal blocks SERIES 150 10A porcelain connectors 1512

FEATURES

1513

Approvals

Series 150 porcelain connectors are suitable for all applications where thermoplastic materials would not have sufficient heat resistance capabilities. The connectors shown are glazed to prevent moisture absorption (base is unglazed) and are available in 10 amp rating only. None of the connectors on this page carry marking.

Nominal Cross-Section mm2

2.5

Voltage Rating

450

V

TECHNICAL DETAILS Formers:

Inserts: Screws: Wire protectors: Temp. limits: continuous: Current rating: Voltage rating: Conductor size: Stripping length:

porcelain C 111 EN 60 672 glazed porcelain, white except lower surface continuous working temperature 1000ยบ C brass, tinned M3 steel, zinc plated, chromed stainless steel formers 1000ยบ C, inserts 350ยบ C to EN 60 598: 16A to EN 60 998: 24A see approvals without wire protectors: 6mm2 with wire protectors: 2.5mm2 7mm2 - 7.5mm2

WITH FIXING HOLES PART NUMBER CODE

Part No.

Poles

Length

Width

Height

Fix. Centres

Fix. Hole Dia.

1572

2

19.5

20.5

18.5

-

-

1573

3

30

20.5

18.5

10.5

3.2

OPTIONS For 2 pole Enter 2 For 3 pole Enter 3

1 5 7 60 98

Without wire protectors Leave blank With wire protectors Enter DS

For wire protected versions use part numbers 1572DS and 1573DS. Other ceramic connectors available on request.

- - - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

60


Electromechanical Terminal Blocks Porcelain terminal blocks SERIES 560 Explosion-proof modular flat screw connectors

FEATURES

Approvals

Series 560 ceramic terminal blocks offer a variety of models for explosion-proof and high temperature applications. These terminals comprise of a glazed steatite mount and two riveted flat-type screw terminals secured to prevent them from twisting, similar to DIN 41000, with binding clip C or D and spring washers B DIN 127. The blocks may either be used rail mounted or independently. The base has a longitudinal slot at the bottom for non-twist securing on mounting rails 16mm x 3mm (0.63” x 0.12”). The surfaces next to the screw-fixing hole can be used for marking purposes. Recommended mounting hardware: M4 pan head screw.

Nominal Cross-Section mm2

Voltage Rating

V

20-12 AWG 20A

20-12 AWG 25A

300

600

TECHNICAL DETAILS Formers: Inserts: Screws: Lock washer: Binding clip: Temp. upper limit:

Steatite KER 220, DIN 40685, colour white brass, nickel plated M4 steel, zinc plated, blue passivated steel, zinc plated, blue passivated steel, zinc plated, blue passivated as per EX approvals: 40º C (104º F) physical limit of materials: 240º C (464º F) see approvals see approvals 2.5mm2 8mm2

Current rating: Voltage rating: Conductor size: Stripping length:

APPROVED TYPES Part number: Part number:

Part number: Part number: Part number: Part number: Part number: Part number:

60

+ 44 (0) 1273 431600

Type designation 560-EN-K4CF: 560-EN-K4DF:

without groove, with wire clip C & spring washer without groove, with wire clip D & spring washer

NOT EX APPROVED TYPES Type designation 560-R4: with groove 560-R4F: with groove & spring washer 560-K4C: without groove, with wire clip C 560-K4CF: without groove, with wire clip C & spring washer 560-K4DF: without groove, with wire clip D & spring washer 560-K4DF - V2A: stainless steel version of the 560-K4DF. Temperature resistant up to 500º C / 940º F

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

99 60


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES 304 Tab type terminal blocks TAB STYLES

STYLE 0022

STYLE 022

STYLE 22

STYLE 11

STYLE 11LF

FEATURES

Approvals

Series 304 tab type terminal blocks are available in 2 and 3 pole lengths, with a combination of tabs and solder tags. Their design and vertical tab orientation allows for high wiring density. Styles 0022, 11 and 11LF are designed so that other styles can be stacked on top. Tab arrangements 0022: 4 tabs 2.8 x 0.8 per pole 022: 4 tabs 4.8 x 0.8 per pole 22: 4 tabs 6.3 x 0.8 per pole 11: 2 tabs 6.3 x 0.8 per pole 11LF: 1 tab 6.3 x 0.8 per pole plus 1 solder tag opposite

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

14-10 AWG 25A

10 max AWG 25A

300

300

B

B, D, E

TECHNICAL DETAILS Mouldings: Solder tags: Temp. limits: Current rating:

Voltage rating:

nylon 6.6, white, UL94 V2 brass, tinned max short term: 140ยบ C continuous: 105ยบ C 2.8 tabs: 10A 4.8 tabs: 15A 6.3 tabs: 25A see approvals

OPTIONS Mixed tabs: mixed tab arrangements also available, details upon request. Marking: consecutive numbering, lettering or special printing available. Please provide sketch.

PART NUMBER CODE

Version: Enter 0022, 022, 22, 11 or 11LF

Number of poles Enter 02 or 03

3 0 4 100

+ 44 (0) 1273 431600

- - - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks Tab type terminal blocks SERIES 306 Tab type terminal blocks TAB STYLES

STYLE 0022

STYLE 022

STYLE 22

STYLE 11

STYLE 11LF

FEATURES

Approvals

Series 306 tab type terminal blocks are available in 4 and 6 pole lengths, with a combination of tabs and solder tags. Their design and vertical tab orientation allow for high wiring density. Styles 0022, 11 and 11LF are designed so that other styles can be stacked on top. Tab arrangements 0022: 4 tabs 2.8 x 0.8 per pole 022: 4 tabs 4.8 x 0.8 per pole 22: 4 tabs 6.3 x 0.8 per pole 11: 2 tabs 6.3 x 0.8 per pole 11LF: 1 tab 6.3 x 0.8 per pole plus 1 solder tag opposite

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

14-10 AWG 25A

10 max AWG 25A

300

300

B

B, D, E

TECHNICAL DETAILS Mouldings: Solder tags: Temp. limits: Current rating:

Voltage rating:

nylon 6.6, grey, UL94 V2 brass, tinned max short term: 140ยบ C continuous: 105ยบ C 2.8 tabs: 10A 4.8 tabs: 15A 6.3 tabs: 25A see approvals

OPTIONS Mixed tabs: mixed tab arrangements also available, details upon request. Marking: consecutive numbering, lettering or special printing available. Please provide sketch.

PART NUMBER CODE

Version: Enter 0022, 022, 22, 11 or 11LF

Number of poles Enter 04 or 06

3 0 6 60

+ 44 (0) 1273 431600

- - - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

101 60


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES 432/433 Tab/screw type terminal blocks SERIES 433

SERIES 432

FEATURES

Approvals

Series 432/433 terminal blocks are designed to meet the VDE and CEE requirements for major appliance connections; the wiring from the power source must be connected to these appliances through a screw connector, while quick-connect tabs can be used internally. They are available in 2 pole (series 432) or 3 pole (series 433) and are supplied with a mounting peg and one fixing hole (type Z) or alternatively series 433 can be supplied with two fixing holes (type L). All types are available with or without wire protectors.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

18-10 AWG 25A

22-10 AWG 20A

300

300

B

B, C, D, E

TECHNICAL DETAILS Mouldings: Tabs: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Tracking distance: Conductor size: Wire stripping length:

nylon 6.6, grey, UL94 V2 brass, nickel plated M3.5 steel, zinc plated, blue passivated 0.8 Nm max short term: 140ยบ C continuous: 105ยบ C see approvals see approvals CTI > 600 4mm2 7mm

OPTIONS Marking: special printing available. Please provide sketch. PART NUMBER CODE With mounting peg Enter Z Without pegs (433 only) Enter L

2 pole Enter 2 3 pole Enter 3

4 3 102

Without protectors Leave blank With protectors Enter DS

+ 44 (0) 1273 431600

- - - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES 42 Tab/screw terminal blocks TAB STYLES

TYPE B

TYPE C

TYPE D

TYPE E

FEATURES

Approvals

Series 42 terminal blocks are designed to meet the VDE and CEE requirements for major appliance connections, the wiring from the power source must be connected to these appliances through a screw connector, while quick-connect tabs can be used internally. They are available in 2, 3, 4 & 6 poles and are supplied with two fixing holes (type L) as standard, or alternatively, 3 and 4 pole versions can be supplied with a mounting peg and one fixing hole (type Z). All types are available with or without wire protectors. Tab arrangements Type B: 2 tabs 4.8 x 0.8 per way Type C: 2 tabs 6.3 x 0.8 per way Type D: 1 tab 6.3 x 0.8 per way Type E: 4 tabs 2.8 x 0.8 per way

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

14-12 AWG 20A

20-10 AWG 20A

300

300

B

B, D, E

TECHNICAL DETAILS Mouldings: Contacts: Screws: Screw tightening torque: Temp. limits: Current rating:

Voltage rating: Tracking distance: Conductor size: Wire stripping length:

nylon 6, grey, UL94 V2 brass, nickel plated M3 steel, zinc plated, blue passivated 0.51 Nm max short term: 140ยบ C continuous: 105ยบ C 2.8 tabs: 6A 4.8 tabs: 16A 6.3 tabs: 25A see approvals CTI > 600 4mm2 7mm

OPTIONS Marking: special printing available. Please provide sketch.

PART NUMBER CODE Versions Enter B, C, D or E

Number of poles Enter 2, 3, 4, or 6

With mounting peg Enter L With pegs (3 & 4 pole only) Enter Z

Without protectors Leave blank With protectors Enter DS

4 2

- - - - - + 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

103


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES 815 Tab/screw terminal blocks

FEATURES

Approvals

Series 815 terminal blocks are designed for connection of electrical appliances to mains supply. Mains connection is made by screw terminals with internal wiring made by 2 tabs 6.3 x 0.8mm per pole. These terminal blocks comply with VDE 0700 (EN 60 335-1) if used with electrical equipment up to a current rating of 16 amps.

PENDING

Nominal Cross-Section mm2

2.5

2.5

2.5

2.5

Voltage Rating

500

500

500

380

V

TECHNICAL DETAILS Mouldings: Contacts: Screws: Temp. limits: Current rating: Voltage rating: Tracking distance: Conductor size: Wire stripping length:

nylon 6, grey, UL94 V2 steel, nickel plated M3.5 steel, zinc plated, blue passivated max short term: 160ยบ C continuous: 100ยบ C to EN 60 335-1: 16A to EN 60 998-1: 24A see approvals CTI > 600 inserts - up to 4mm2 7.5mm - 8mm

OPTIONS Marking: special printing available. Please provide sketch.

PART NUMBER CODE

Number of poles 2 poles Enter 2 4 poles Enter 4

8 1 5 104

- - - - - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES 307PC Tab type terminal blocks

TAB STYLES

FEATURES

Approvals

Series 307PC tab type terminal blocks are barrier connectors suitable for medium duty applications. The polycarbonate mouldings allow relatively high working temperatures (up to 135° C) and are suitable for use with conductors with crimped terminals fitted. The tabs are fitted in two styles, firstly in a rivetted "star" format as styles WE1 to WE42 which have various tab arrangements in flat, 45° & 90°. Alternatively, tab styles WE53 to WE66 have flat tabs only with spacers between. These are particularly suitable for use with 3070 A & B covers as shown on page 103.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

12 max AWG 25A

18-14 AWG 25A

300

300

B,C

B, C, D, E

TECHNICAL DETAILS Mouldings: Contacts: Screws: Rivets: Temp. limits: Current rating: Voltage rating: Tracking distance: Conductor size: Wire stripping length:

polycarbonate, black, UL94 V0 brass, nickel plated M4 steel, zinc plated, blue passivated copper, tinned max short term: 135º C continuous: 105º C screw terminals: 10A tab terminals: 25A 400v ~ to DIN VDE 0110, pollution degree 2 CTI > 110 screw terminals: 4mm2 tab terminals: 6mm2 8mm

OPTIONS Mixed tabs: mixed tab arrangements are available upon request. Please provide sketch.

PART NUMBER CODE

Screw terminals both sides: please refer to page 102.

Tab styles WE1 - WE42 Leave blank Tab styles WE53 - WE66 Enter 0

Covers to suit: please refer to page 103. Tabs: also available with 2.8 & 4.8mm tabs.

Number of poles Enter 01 - 12

3 0 7

P C

WE

+ 44 (0) 1273 431600

Tab style Enter 01 - 66

- - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

105


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES 307PCF Barrier terminal blocks

FEATURES

Approvals

Series 307PCF terminal blocks are barrier connectors suitable for medium duty applications. The polycarbonate mouldings allow relatively high working temperatures (up to 135° C) and are suitable for use with either bared conductors or conductors fitted with cable sockets. The terminal links are grooved to allow bared conductors to be effectively clamped between the busbar and screw.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

14 max AWG 20A

18-14 AWG 20A

600

600

B,C

B, C, D, E

TECHNICAL DETAILS Mouldings: Contacts: Screws: Screw tightening torque: Washers: Rivets: Temp. limits: Current rating: Voltage rating: Tracking distance: Conductor size: Wire stripping length:

polycarbonate, black, UL94 V0 brass, nickel plated M4 steel, zinc plated, blue passivated 1.2 Nm spring steel, zinc plated copper, tinned max short term: 135º C continuous: 105º C 16A see approvals CTI > 110 bared conductors: 4mm2 with cable sockets: 6mm2 8mm

OPTIONS PART NUMBER CODE

Tab types: please refer to page 101. Covers to suit: please refer to page 103. Loose tab connectors: please refer to page 107.

Number of poles Enter 02 - 12

3 0 7 106

P CF - - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES 3070 Covers & pins Poles

Length

Fix. hole spacing

02

24.0

11

03

35.0

22

04

46.0

33

05

57.5

22

06

68.5

33

07

79.5

44

08

90.5

55

09

101.5

66

10

113.0

77

11

124.0

88

12

135.0

99

FEATURES

TECHNICAL DETAILS

Series 3070 terminal block covers are suitable for use with all types of series 307PCF screw type terminal blocks as shown on page 102, and with all flat tab terminal blocks series 307PC as shown on page 101. They are available in polystyrene material (type A) or nylon (type B) in lengths from 2 to 12 poles.

Material:

Please note. These covers are not suitable for use with tab type terminal blocks where tabs are mounted at 45°or 90°.

Maximum working temp:

3070A: polystyrene 3070B: nylon 6, UL94 V2 307018/21: polyethylene 3070A: 75º C 3070B: 80º C

FIXING PINS Series 307018 & 21 fixing pins are used for securing the covers to the terminal blocks by pushing them through the cover into the tubular rivet used to secure the tabs to the terminal block.1 or 2 pins may be required depending on the length of the terminal block chosen. Type 307021 is used for all tab styles except WE54 and WE66, which use type 307018. Please note. These pins are supplied as a separate item to the covers. Please ensure these are requested, if required, when placing your order.

PART NUMBER CODE

Polystyrene Enter A Nylon Enter B

Number of poles Enter 02 - 12

3 0 7 0

- - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

107


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES 982/983F 3/8” & 10mm pitch - tab type barrier blocks

TAB STYLES

FEATURES

Approvals

Series 982/983M tab/screw type barrier connectors are available in 3/8" pitch (series 982) or 5mm pitch (series 983) in lengths from 2 to 24 poles. Various types are available as per the table shown above. This range is only available with 4.8 x 0.8mm tabs. Note: 1 pole must be left empty at each end to allow for the connector to be fixed down.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

20-12 AWG 15A

12 max AWG 20A

300

300

B,C

B, D, E

TECHNICAL DETAILS Mouldings: Screws & pressure plates: Screw tightening torque: Tabs: Temp. limits: Current rating: Voltage rating:

Tracking distance: Conductor size: Wire stripping length: Pin spacing: PART NUMBER CODE

nylon, grey, UL94 V2 steel, zinc plated, blue passivated 0.79 Nm brass, nickel plated max short term: 140º C continuous: 105º C 2.8 tab connector: 6A 4.8 tab connector: 16A 500v ~ to VDE 0110, pollution degree 3, creepage distance 6.3mm, clearance 5mm, breakdown voltage 4000v CTI > 600 2.5mm2 8.5mm 982 - 3/8” (9.52mm) 983 - 10mm

3/8” pitch Enter 2 10mm pitch Enter 3

Number of poles Enter 02 - 24

9 8 108

F

Tab style Enter as per table shown above

8 0

+ 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES 401 Tab type terminal blocks

FEATURES

Approvals

Series 401 terminal blocks have tabs on both sides. They are used mainly as connectors, terminals or as a grouping point in electrical equipment and motor vehicle construction. They are available with the option of two tab sizes, either 4.8 x 0.8mm or 6.3 x 0.8mm. The housings can be supplied in either clear PVC or natural nylon in lengths from 2 to 12 poles. These connectors can be mounted on top of each other to provide multiple stacking of terminals.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

10 max AWG 25A

10 max AWG 25A

300

300

B,C

B, D, E

TECHNICAL DETAILS Mouldings: Tabs: Temp. limits:

PVC: nylon:

Current rating: Voltage rating: Tracking distance: Conductor size:

clear PVC or nylon 6, natural, UL94 V2 brass, tinned max short term: 80ยบ C. Continuous 70ยบ C max short term: 140ยบ C. Continuous 105ยบ C 25A 380v ~ to VDE 0110, pollution degree 3 when mounted on insulating base PVC: CTI > 400 nylon: CTI > 600 6mm2

OPTIONS Cut lengths: standard 12 pole lengths can be cut to shorter lengths. Tabs: this range can be fitted with 1 x 2.8mm tab on one side & 2 x 2.8mm tabs on the opposite side. Please enquire for details.

PART NUMBER CODE 4.8 x 0.8mm tabs Enter 48 6.3 x 0.8mm tabs Leave blank

PVC mouldings Leave blank Nylon mouldings Enter PA

Number of poles Enter 02 - 12

4 0 1 + 44 (0) 1273 431600

- - - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

109


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES 401LF Tab/solder tag terminal blocks

FEATURES

Approvals

Series 401LF terminal blocks have tabs on one side and solder tags on the opposite side. They are used mainly as connectors, terminals or as a grouping point in electrical equipment and motor vehicle construction. They are available with the option of two tab sizes either 4.8 x 0.8mm or 6.3 x 0.8mm. The housings can be supplied in either clear PVC or natural nylon in lengths of 2 to 12 poles. These connectors can be mounted on top of each other to provide multiple stacking of terminals.

Nominal Cross-Section mm2

Voltage Rating

V

Application Group

14 max AWG 25A

16 max AWG 25A

300

300

B,C

B, D, E

TECHNICAL DETAILS Mouldings: Tabs: Solder tags: Temp. limits:

PVC: nylon:

Current rating: Voltage rating: Tracking distance: Conductor size:

clear PVC or nylon 6, natural, UL94 V2 brass, tinned brass, tinned max short term: 80ยบ C. Continuous 70ยบ C max short term: 140ยบ C. Continuous 105ยบ C 25A 380v ~ to VDE 0110, pollution degree 3 when mounted on insulating base PVC: CTI > 400 nylon: CTI > 600 6mm2

OPTIONS Cut lengths: standard 12 pole lengths can be cut to shorter lengths. Tabs: this range can also be fitted with 2 x 2.8mm tabs on one side and a solder tag on the other side. Please enquire for details.

PART NUMBER CODE PVC mouldings Leave blank Nylon mouldings Enter PA

4.8 x 0.8mm tabs Enter 48 6.3 x 0.8mm tabs Leave blank

Number of poles Enter 01 - 12

4 0 1 110

L F

+ 44 (0) 1273 431600

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Tab type terminal blocks SERIES GST Tab terminals

GST0

GST9090

GST45

GSTS0

GST90

GSTS45

GST00

GSTS90

GST4545

GSTSAK0

FEATURES

TECHNICAL DETAILS

Series GST loose tab connectors are suitable for panel or chassis mounting and are supplied in 6.3mm size (0.25in.) as standard. They are available in flat, 45° and 90° format, with the option of a single or double tab. Alternatively, type GSTS is offered with a screw fitted on one side.

Tabs: Screws: (where applicable) Current rating: Thickness:

brass, nickel plated M4 x 8 steel, zinc plated, blue passivated 25A 0.8mm (0.03”)

OPTIONS Tabs: this range is also available in 2.8mm and 4.8mm tab sizes. Please enquire for details.

PART NUMBER CODE

Without screw Leave blank With screw Enter S

Enter tab style required

GS T

- - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

111


Electromechanical Terminal Blocks

Transformer terminal blocks SERIES DK4 Transformer connectors

DK4

FEATURES

DKS4

Approvals

Series DK4 connectors provide feed through connections for resin filled transformers to connect internal wiring to outside terminals. They are fitted by pushing into pre-drilled holes in the transformer (7.2mm dia). Hole spacing is 10mm with a wall thickness range of 1.2mm - 4mm (type DK4) or 0.8mm - 4mm (type DKS). They can be assembled to any length from the basic one pole version. External wiring is with rising clamp terminals and internal wiring through open or closed slot solder tags. Once mounted these connectors meet the finger guard test. Type DKS has an additional sleeve on the fixing lug which allows them to be used with low viscosity sealing compounds.

Nominal Cross-Section mm2

Voltage Rating

V

20-14 AWG 5A

20-14 AWG 16A

600

600 over 5A: 300

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Tracking distance: Conductor size: wire stripping length:

nylon 6.6, grey, white or black, UL94 V2 brass, tinned M3.5 steel, zinc plated, chromed 0.8 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 61 558-1: 32A see approvals CTI = 600 0.5mm2 - 4mm2 8.5mm - 9mm

OPTIONS Marking: special printing available. Please provide sketch.

PART NUMBER CODE Unsleeved Leave blank Sleeved Enter S

Open solder tags Enter O Closed solder tags Enter G

Colour grey - Enter G Colour black - Enter B

D K 112

4

- - - - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Transformer terminal blocks SERIES DK4SI Fused transformer connectors

DK4SI

FEATURES

DKS4SI

Approvals

Series DK4SI fused connectors provide feed through connections for resin filled transformers to connect internal wiring to outside terminals. They incorporate two fixing lugs per pole (10mm centres) and are used with automotive fuses (series FKS) which comply with DIN72581. They can be assembled to any length from the basic one pole version. External wiring is with rising clamp terminals and internal wiring through open or closed slot solder tags. Once mounted they meet the finger guard test. Available in black, grey and white and with sleeved or unsleeved lugs. *Note: with an ambient temp. of up to 23° C, constant current must not exceed 80% of the current rating.

Nominal Cross-Section mm2

Voltage Rating

V

20-14 AWG 15A

20-14 AWG 15A

32

32

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Tracking distance: Conductor size: Wire stripping length: Chassis hole diameter: Chassis wall thickness:

nylon 6.6, grey, white or black, UL94 V2 brass, tinned M3.5 steel, zinc plated, chromed 0.8 Nm max short term: 160º C continuous: 100º C max: 15A 500 ~ KB > 600 0.5mm2 - 4mm2 9mm 7.2mm 1.2mm - 4mm

OPTIONS Marking: special printing available. Please provide sketch. Fuses: series FKS. Please enquire for details.

PART NUMBER CODE Unsleeved Leave blank Sleeved Enter S

Open solder tags Enter O Closed solder tags Enter G

Colour grey - Enter G Colour black - Enter B

D K

4 S I

- - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

113


Electromechanical Terminal Blocks

Transformer terminal blocks SERIES RKW14M “Mini” transformer connectors

1 POLE

FEATURES

2 POLES

Approvals

Series RKW14M 'mini' series are low profile transformer connectors with a clearance distance of just 19.3mm from the front of the transformer. They are provided with snap feet to allow quick fixing to mounting rails 10 x 2mm or to snap-indevices in the winding frame. They meet the requirements of VBG4 and VDE 0106, part 100: “finger safety guard” VDE 0470 part 1. External connections are by rising clamp terminals.

Nominal Cross-Section mm2

Voltage Rating

V

20-10 AWG

18-12 AWG 20A

4.0

4.0

600

300v < 5A: 600v

750

750

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Tracking distance: Conductor size: Wire stripping length:

nylon 6.6, grey, red or orange, UL94 V2 brass, tinned M3.5 steel, zinc plated, chromed 0.8 Nm max short term: 160º C continuous: 100º C to EN 61 558-1: 32A to EN 60 998: 32A see approvals KB > 600 0.5mm2 - 4mm2 8mm

OPTIONS Marking: press in markers available, please contact Metway head office for details. PART NUMBER CODE

Number of poles Enter 01 or 02

R KW 1 4 MO 114

+ 44 (0) 1273 431600

Colour grey Enter G Colour red Enter R Colour orange Enter OR

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Transformer terminal blocks SERIES RKW14 Transformer connectors

1 POLE

FEATURES

2 POLES

Approvals

Series RKW14 connectors are the standard profile version of type RKW14M (see page 110) suitable for snap fixing to flat mounting rails 10mm x 2mm or to snap in devices in the winding frame. External wiring is by rising clamp screw terminal and/or by slotted tabs which will accept 1 - 6.3 x 0.8mm or 2 - 2.8 x 0.8mm receptacles (type F). They meet the requirements of VBG4 and VDE0106, part 100: "finger safety guard" VDE 0470 part 1.

Nominal Cross-Section mm2

Voltage Rating

V

20-10 AWG

18-12 AWG 20A

4.0

4.0

600

300v < 5A: 600v

750

750

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating:

Voltage rating: Tracking distance: Conductor size: Wire stripping length:

nylon 6.6, grey, red or orange, UL94 V2 brass, tinned M3.5 steel, zinc plated, chromed 0.8 Nm max short term: 160ยบ C continuous: 100ยบ C to EN 61 558-1: 32A to EN 60 998: 32A tab terminals - 6.3mm: 16A tab terminals - 2.8mm: 8A see approvals CTI = 600 0.5mm2 - 4mm2 8mm

OPTIONS Marking: press in markers available, please contact Metway head office for details.

PART NUMBER CODE

Number of poles Enter 01 or 02 Colour grey Enter G Colour red Enter R Colour orange Enter OR

Screw terminals Leave blank Tab terminals Enter F

R KW1 4

O

+ 44 (0) 1273 431600

- - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

115


Electromechanical Terminal Blocks

Transformer terminal blocks SERIES RKW14SI Fused transformer connectors

FEATURES

Approvals

Series RKW14SI are a 1 pole connector incorporating an in-line fuseholder for use with 20mm x 5mm fuses. They are provided with snap feet allowing quick fixing to mounting rails 10 x 2mm or to snap-in devices in the winding frame. They meet the requirements of VBG4 and VDE0106 part 100: “finger safety guard” VDE 0470 part 1. External connection is by rising clamp terminals.

Nominal Cross-Section mm2

Voltage Rating

20-10 AWG 20A

18-12 AWG 25A

4.0

4.0

300

250v

250

400

V

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Tracking distance: Conductor size: Wire stripping length:

nylon 6.6, red or orange, UL94 V2 brass, tinned M3.5 steel, zinc plated, chromed 0.8 Nm max short term: 160º C continuous: 100º C to EN 61 127-6: 10A see approvals CTI > 600 n/a 7mm - 7.5mm

OPTIONS Other fuse sizes: also available for fuses 30 x 5mm & 32 x 6.3mm. Please ask for details. Marking: press in markers available, please contact Metway head office for details.

PART NUMBER CODE

Colour red Enter R Colour orange Enter OR

R KW1 4 S I O 116

+ 44 (0) 1273 431600

- - - - +44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Transformer terminal blocks SERIES RKW110 10mm2 63A transformer connectors

FEATURES

Approvals

Series RKW110 are provided with snap feet allowing quick fixing to mounting rails 10 x 2mm or to snap-in devices in the winding frame. External wiring is with rising clamp terminals and internal wiring through open solder tags which are crimped to secure the wire. These connectors meet the requirements of VGB4 and VDE 0106 part 100: “finger safety guard” VDE 0470 part 1.

Nominal Cross-Section mm2

16

20-6 AWG 55A

20-6 AWG 55A

Voltage Rating

750

600

600

V

TECHNICAL DETAILS Mouldings: Inserts: Screws: Screw tightening torque: Temp. limits: Current rating: Voltage rating: Tracking distance: Conductor size: Wire stripping length:

nylon 6.6, grey, red or orange, UL94 V2 brass, tinned M6 x 11 Allan screw steel, zinc plated, chromed 2.5 Nm max short term: 160º C continuous: 100º C to EN 61 558-1: 63A to EN 60 998: 76A see approvals CTI > 600 2.5mm2 - 16mm2 13mm - 14mm

OPTIONS Marking: press in markers available, please contact Metway head office for details.

PART NUMBER CODE

Mounting rail: please contact Metway head office for details.

Colour grey Enter G Colour red Enter R Colour orange Enter OR

R KW1 1 0

- - - - - - -

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

117


Electromechanical Terminal Blocks

Rail mounted terminals SERIES KUT 2.5 - 6 Feed through terminals

KUT 2.5

KUT 4

KUT 6

TECHNICAL DETAILS KUT 2.5

KUT 4

KUT 6

Mouldings:

polyamide 6.6 grey

polyamide 6.6 grey

polyamide 6.6 grey

Terminal pitch:

6mm

6.7mm

8mm

height x width (mm):

41 x 42.5

46.4 x 42.5

46.4 x 42.5

Rated cross section:

2.5mm

4mm

6mm2

Conductor size: flexible:

0.5mm2 - 2.5mm2

0.5mm2 - 4mm2

0.5mm2 - 6mm2

0.5mm2 - 4mm2

0.5mm2 - 6mm2

0.6mm2 - 10mm2

Wire stripping length:

10mm

12mm

12mm

Connection type:

2 screw clamp & 1 tapped

2 screw clamp & 1 tapped

2 screw clamp & 1 tapped

hole for cross connection

hole for cross connection

hole for cross connection

800v/24A/2.5mm /0.5 Nm

800v / 32A / 4mm / 0.5 Nm

800v / 41A / 6mm2 / 0.8 Nm

600v/25A/12-20AWG / 7Lbln

600v /35A/10-20AWG / 7Lbln

600v /50A/8-20AWG / 14Lbln

M3

M3

M3.5

solid:

Ratings IEC 60947-7-7-1: : Screw type:

2

2

FEATURES

+ 44 (0) 1273 431600

2

Approvals

The Metway ‘K’ series range of universal rail mounted feed through terminals in PA 6.6 offer a complete range suitable for all power and control applications. The proven screw-clamp design offers high contact force and is very user friendly. The range covers terminals for conductor sizes 0.5mm² - 95mm² and the special foot design provides a slot for easy mounting and removal of a single terminal from a stack, using a screwdriver.

118

2

OPTIONS AVAILABLE ON REQUEST End plates Partition plates (with or without foot) Protection covers End clamps Shorting link assemblies Permanent shorting links Comb links Marking labels Warning labels Colours : grey, khaki, red, yellow, blue, black, green

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Rail mounted terminals SERIES KUT 10 - 25 Feed through terminals

KUT 10

KUT 16

KUT 25

TECHNICAL DETAILS KUT 10

KUT 16

KUT 25

Mouldings:

polyamide 6.6 grey

polyamide 6.6 grey

polyamide 6.6 grey

Terminal pitch:

10mm

12mm

12mm

height x width (mm):

46.4 x 42.5

51 x 44.5

56 x 45

Rated cross section:

10mm

16mm

25mm2

Conductor size: flexible:

1.5mm2 - 10mm2

6mm2 - 16mm2

6mm2 - 25mm2

1.5mm2 - 16mm2

6mm2 - 16mm2

6mm2 - 25mm2

Wire stripping length:

12mm

15mm

15mm

Connection type:

2 screw clamp & 1 tapped

2 screw clamp & 1 tapped

2 screw clamp & 1 tapped

hole for cross connection

hole for cross connection

hole for cross connection

800v/57A/10mm /1.2 Nm

800v / 76A / 16mm / 1.2 Nm

1000v / 101A / 25mm2 / 2.3 Nm

600v/65A/6-16AWG / 14Lbln

600v /100A/3-12AWG / 17Lbln

600v /115A/2-10AWG / 20Lbln

M4

M4

M5

solid:

Ratings IEC 60947-7-7-1: : Screw type:

2

2

FEATURES

2

Approvals

The Metway ‘K’ series range of universal rail mounted feed through terminals in PA 6.6 offer a complete range suitable for all power and control applications. The proven screw-clamp design offers high contact force and is very user friendly. The range covers terminals for conductor sizes 0.5mm² - 95mm² and the special foot design provides a slot for easy mounting and removal of a single terminal from a stack, using a screwdriver.

+ 44 (0) 1273 431600

2

OPTIONS AVAILABLE ON REQUEST End plates Partition plates (with or without foot) Protection covers End clamps Shorting link assemblies Permanent shorting links Comb links Marking labels Warning labels Colours : grey, khaki, red, yellow, blue, black, green

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

119


Electromechanical Terminal Blocks

Rail mounted terminals SERIES KUT 35 - 95 Feed through terminals

KUT 35

KUT 50

KUT 95

TECHNICAL DETAILS KUT 35

KUT 50

KUT 95

Mouldings:

polyamide 6.6 grey

polyamide 6.6 grey

polyamide 6.6 grey

Terminal pitch:

17mm

20.5mm

25mm

height x width (mm):

58 x 51

75.5 x 71

90.5 x 83

Rated cross section:

35mm

50mm

95mm2

Conductor size: flexible:

10mm2 - 35mm2

16mm2 - 50mm2

25mm2 - 95mm2

10mm2 - 35mm2

16mm2 - 70mm2

25mm2 - 120mm2

Wire stripping length:

17mm

24mm

33mm

Connection type:

2 screw clamp & 1 tapped

2 screw clamp & 1 tapped

2 screw clamp

hole for cross connection

hole for cross connection

1000v/125A/35mm / 3 Nm

1000v / 150A / 50mm2 / 8 Nm

1000v / 232A / 95mm2 / 20 Nm

600v/140A/1-14AWG / 38Lbln

600v /150A 2/0-6AWG / 60Lbln

600v /230A 4/0-2AWG / 20Lbln

M6

M6

M8

solid:

Ratings IEC 60947-7-7-1: : Screw type:

2

2

FEATURES

2

Approvals

The Metway ‘K’ series range of universal rail mounted feed through terminals in PA 6.6 offer a complete range suitable for all power and control applications. The proven screw-clamp design offers high contact force and is very user friendly. The range covers terminals for conductor sizes 0.5mm² - 95mm² and the special foot design provides a slot for easy mounting and removal of a single terminal from a stack, using a screwdriver.

OPTIONS AVAILABLE ON REQUEST End plates* Partition plates (with or without foot)** Protection covers** End clamps Shorting link assemblies** Permanent shorting links** Comb links** Marking labels Warning labels** Colours : grey, khaki, red, yellow, blue, black, green * not required for KUT 95 ** not available for KUT 95

120

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Rail mounted terminals SERIES ET 6 - 10 Earth terminal blocks

ET 6

ET 10

TECHNICAL DETAILS ET 6

ET 10

Mouldings:

polyamide 6.6 green / yellow

polyamide 6.6 green / yellow

Terminal pitch:

8mm

10mm

height x width (mm):

45 x 43

45.5 x 43

Rated cross section:

6mm

10mm2

Conductor size:

2

flexible:

1.5mm2 - 6mm2

1.5mm2 - 10mm2

solid:

1.5mm2 - 10mm2

1.5mm2 - 16mm2

Wire stripping length:

13mm

13mm

Connection type:

2 screw clamps

2 screw clamps

Ratings IEC 60947-7-7-2:

6mm /8 Nm

10mm2 / 1.2 Nm

: Screw type:

2

8-20AWG/14Lbln

6-16AWG / 17Lbln

M3.5

M4

FEATURES

Approvals

Metwayâ&#x20AC;&#x2122;s earth terminal blocks replace the conventional Bus Bar used for earthing. The structural design is such that the mounting rail not only has a mechanical but also an electrical function. Earthing is achieved through the foot which clamps directly onto the rail with the earth terminals being mounted on the same rail along with the other terminal blocks. The earthing conductor is brass with a nickel-tin plating providing a low resistance path and the housings are a green-yellow combination in accordance with universally accepted colour coding for earthing.

+ 44 (0) 1273 431600

OPTIONS AVAILABLE ON REQUEST Partition plates with Protection covers End clamps Marking labels Group marking carriers

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

121


Electromechanical Terminal Blocks

Rail mounted terminals SERIES ET 16 - 35 Earth terminal blocks

ET 16

ET 35

TECHNICAL DETAILS ET 16

ET 35

Mouldings:

polyamide 6.6 green / yellow

polyamide 6.6 green / yellow

Terminal pitch:

16mm

35mm

height x width (mm):

52 x 45

63 x 58

Rated cross section:

16mm

35mm2

Conductor size:

2

flexible:

6mm2 - 16mm2

6mm2 - 35mm2

solid:

6mm2 - 25mm2

6mm2 - 35mm2

Wire stripping length:

13mm

17mm

Connection type:

2 screw clamps

2 screw clamps

Ratings IEC 60947-7-7-2:

16mm /1.2 Nm

35mm2 / 3 Nm

: Screw type:

2

3-12AWG/14Lbln

1- 8AWG / 32Lbln

M4

M4

FEATURES

Approvals

Metwayâ&#x20AC;&#x2122;s earth terminal blocks replace the conventional Bus Bar used for earthing. The structural design is such that the mounting rail not only has a mechanical but also an electrical function. Earthing is achieved through the foot which clamps directly onto the rail with the earth terminals being mounted on the same rail along with the other terminal blocks. The earthing conductor is brass with a nickel-tin plating providing a low resistance path and the housings are a green-yellow combination in accordance with universally accepted colour coding for earthing.

122

+ 44 (0) 1273 431600

OPTIONS AVAILABLE ON REQUEST Partition plates with Protection covers End clamps Marking labels Group marking carriers

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Rail mounted terminals SERIES KULT 4 - 10 Spring-loaded feed through terminals

KULT 4

KULT 6

KULT 10

TECHNICAL DETAILS

Mouldings:

KULT 4

KULT 6

KULT 10

polyamide 6.6 grey

polyamide 6.6 grey

polyamide 6.6 grey

Terminal pitch:

6mm

8mm

10mm

height x width (mm):

58.5 x 52

58.5 x 52

58.5 x 52

Rated cross section:

4mm2

6mm2

10mm2

Conductor size: flexible:

0.5mm2 - 4mm2

0.5mm2 - 6mm2

1.5mm2 - 10mm2

0.5mm2 - 6mm2

0.5mm2 - 10mm2

1.5mm2 - 16mm2

Wire stripping length:

12mm

12mm

12mm

Connection type:

2 screw clamp & 1 tapped

2 screw clamp & 1 tapped

2 screw clamp & 1 tapped

hole for cross connection

hole for cross connection

hole for cross connection

1000v/32A/4mm /0.5 Nm

800v/41A/6mm /1.4 Nm

1000v/57A/10mm2 /1.2 Nm

600v/35A/10-24AWG/7Lbln

600v/45A 2/8-24AWG/12Lbln

600v/65A 4/6-16AWG/17Lbln

M4

M4

M4

solid:

Ratings IEC 60947-7-7-1: : Screw type:

2

2

FEATURES Approvals

The Metway ‘K’ series range of universal rail mounted spring-loaded feed through terminals in PA 6.6 employ compression springs below the contact clamp assembly, for a better and more reliable connection in high vibration applications. The range covers terminals for conductor sizes 0.5mm² - 16mm² and as with the standard K series range the special foot design provides a slot for easy mounting and removal of a single terminal from a stack, using a screwdriver.

+ 44 (0) 1273 431600

OPTIONS AVAILABLE ON REQUEST End plates Partition plates (with foot) Protection covers End clamps Shorting link assemblies Marking labels Colours: grey, khaki, red, yellow, blue, black, green

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

123


Electromechanical Terminal Blocks

Rail mounted terminals SERIES KUDF 4 - 4A Fuse terminals

KUDF 4

KUDF 4D

KUDF 4A

TECHNICAL DETAILS KUDF 4

KUDF 4D

KUDF 4A

Mouldings:

polyamide 6.6 grey

polyamide 6.6 grey

polyamide 6.6 grey

Terminal pitch:

8mm

8mm

8mm

height x width (mm):

42.5 x 58

42.5 x 58

42.5 x 58

Rated cross section:

4mm

4mm

4mm2

Conductor size: flexible:

0.5mm2 - 4mm2

0.5mm2 - 4mm2

0.5mm2 - 4mm2

0.5mm2 - 4mm2

0.5mm2 - 4mm2

0.5mm2 - 4mm2

Wire stripping length:

9mm

9mm

9mm

Connection type:

2 screw clamp

Ratings IEC 60947-7-7-1:

800v/6.3A/4mm /0.4 Nm

800v / 6.3A / 4mm / 0.4 Nm

800v / 6.3A / 4mm2 / 0.4 Nm

600v/7A/12-20AWG / 6Lbln

600v /7A 2/12-20AWG / 6Lbln

600v /7A 4/12-20AWG / 6Lbln

M3

M3

M3

solid:

: Screw type:

2

2

2 screw clamp 2

2 screw clamp 2

Approvals:

FEATURES

OPTIONS AVAILABLE ON REQUEST

In control and automation applications where a fuse protection facility is required, Metway can offer terminal blocks with a built-in safety fuse lever. These terminal blocks accommodate a glass cartridge fuse of 5mm x 20mm, 5mm x 25mm, and 6mm x 32mm in size. The fuseholder itself is manufactured from a special grade phosphor-bronze providing low contact resistance. A solid brass link type DL4 can be inserted in place of the fuse which makes it possible to use the terminal as a disconnecting type. The 4D and 4A types are supplied with a red LED to act as a blown fuse indicator.

Partition plates (with foot) Protection covers End clamps Comb link Marking labels Colours : grey, khaki, red, yellow, blue, black, green

Standard operating voltages can be selected from a range of 12 VDC, 24 VDC, 48 VDC, 110 VDC, 220 VDC, 110 VAC and 240 VAC.

124

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

125


Electromechanical Terminal Blocks

126

+ 44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk


Electromechanical Terminal Blocks

Electromechanical Terminal Blocks

About Metway

Terms and Conditions

Metway History Metway Electrical Industries was established in 1937 and is still a privately owned family business. Metway has been providing electrical connector solutions for over fifty years to the lighting and electronic sector, now with a range in excess of 20,000 products from simple terminal blocks to PCB mount connectors and transformers.

CONDITIONS OF CONTRACT No condition or stipulations, which are attached to the buyer’s form of order, and which are inconsistent with these terms or which add to or modify them in any way, shall have any effect, unless expressly accepted in writing by a Director of the Company at the time of acknowledgement of each separate order. In the absence of such acceptance, the buyer shall be deemed to have withdrawn or waived his conditions or stipulations and to contract solely on these terms.

The Wiring Systems division was launched in 1999 concentrating on providing a “plug & play” alternative to conventional wiring which has evolved into a rapidly growing business. The inclusion of a full lighting control range ensures that Metway is at the forefront of its market. Metway’s head office in Brighton, incorporating a 17,500 square foot warehouse and production facility, is the hub that enables a fast turnaround of orders. A vast stock holding and on-site manufacturing ensures that customer requirements are met. Mission Statement To supply high quality competitive connector & lighting control solutions to the electrical & electronic industry, backed by high levels of service and technical support.

SPECIAL QUOTATIONS Special quotations at variance from our current PRICE LISTS, and variances from these Terms and Conditions of Trading, shall only be valid if in writing and signed by an authorised official of the Company

Our aim We aim to be the friendliest and most flexible organisation within our industry, providing fast and efficient service to all our customers.

ORDERS Orders should be in writing. Verbal orders will be accepted, but the customer will be responsible for any errors of description or quantity, or date of delivery in goods supplied there under.

Quality policy Metway is committed to a policy that will ensure that our customers are provided with products of a consistently high level of quality, reliability, safety and that products are delivered at the agreed time. Metway is also committed to improving service to our customers by exceeding their expectations.

CANCELLATION 1. After acceptance, orders shall not be subject to cancellation or alteration, except with the agreement of the Company in writing and signed by an authorised official. 2. Cancellation of orders for goods specially made to customers specifications, cannot be accepted 3. Cancellation or alteration charges may be applicable, to cover the cost of our administration

To achieve these objectives the company's Quality Management System is registered to BS EN ISO 9001:2008. As a means to monitor and measure Metway's performance a number of indicators are measured and reported at monthly management meetings, with a view to continual improvement.

NEW ACCOUNTS In order to avoid delay, goods up to the value of £250, can be despatched upon receipt of a completed and signed METWAY credit application form. For orders which exceed this value, it will be necessary to ask for the difference on account. Credit applications are only accepted on the METWAY credit application forms which can be posted or faxed immediately upon request.

The maintenance of quality is the responsibility of all staff and each is responsible for implementing the requirements of the quality system. Staff are trained in all aspects of the quality system. Rigorous quality control procedures and international product approval provides you and your customers with peace of mind. Environmental policy Metway accepts its environmental responsibilities and recognises its obligations to contribute to the resolution of global and local environmental issues by reducing its environmental impacts and by taking a leading role in promoting environmental good practice. Therefore Metway will: comply with all relevant legislation and codes of practice continually seek to improve its environmental performance integrate environmental concerns into all planning improve staff environmental awareness and understanding All materials used in our products are non-toxic and have no known detrimental effects on the Environment. Wherever possible we use packaging that is biodegradable or we can arrange for this to be returned to us for recycling or safe disposal. Please contact us if you have any special requirements in this area. Policies correct at time of going to print. For the latest information please go to www.metway.co.uk Metway Electrical Industries Limited Barrie House 18 North Street Portslade East Sussex BN41 1DG Telephone: Sales Reception Accounts Fax: Email: Web:

2

PRICES AND VARIATION 1. All prices quoted or listed by the Company, are based on the prices of the company’s suppliers at the time of quotation listing. These are subject to adjustment prior to despatch to cover any increase in such prices, or in taxation or duty which might take place prior to delivery, such prices are exclusive of packing, carriage and VAT. 2. Where goods are to be imported, the Company reserves the right to vary the price quoted, to reflect the rate of exchange for the purchase of the relevant currency in pounds sterling.

RETURNS We cannot accept the return of goods unless our prior consent has first been obtained, and the goods are returned to us in their original boxes or cartons, and in an unused condition. We reserve the right to make a 10% handling charge, min £40, which ever is the greater, to cover our administration costs, should this be necessary. DRAWINGS/DATA 1. All specifications, drawings and particulars of weights, dimensions, capacity or other details are approximate only. Specific details can be confirmed on request. 2. We shall make every effort to ensure the accuracy of technical details relating to our goods but we accept no liability in contract or tort or under statute or otherwise for any damages or injury arising directly or indirectly from any error or omission in such technical details whether caused by our negligence or otherwise. 3. The Company reserves the right to amend and/or improve designs at any time without notice. PERFORMANCE 1. We shall use our best endeavours to provide you with general advice about our goods. 2. The responsibility for ensuring that goods are sufficient and suitable for your requirements is your sole responsibility. EXPORT The foregoing conditions also apply to export orders. Our prices are ex works, packing & freight at extra cost. We shall be pleased to quote especially if substantial quantities are required. Payment terms are negotiable. DISCLAIMER Metway will not accept responsibility for connections made between its connectors and other unapproved manufacturers connectors. For details of approved connectors contact Metway.

DELIVERY DATES While the Company will use its best endeavours to meet any stated delivery dates, time shall not be the essence of the contract and the Company shall not be liable for any loss or damage whatsoever, resulting directly or indirectly from late delivery. DELIVERY 1. All prices are ex works, and all or any costs of delivery will be charged to the buyer, unless otherwise stated under the terms of the contract, or at time of order. Goods will be consigned by post, or road transport, to an address in the United Kingdom, specified by the buyer in writing. 2. In the event of non-deliver, the buyer must notify the Company (i) in the case of non-delivery, within the United Kingdom, within 7 days of notification of despatch, or receipt of invoice, whichever is the earlier (ii) In the case of overseas non-delivery, within 14 days of notification of despatch, or receipt of invoice, whichever is the earlier. Otherwise, a claim cannot be made on the carriers for loss in transit, if we are not so advised, the consignee will be deemed to be responsible for the loss 3. Every care is taken in checking goods In the event of shortage or damage, the buyer must notify the Company within 3 days of receipt of goods, the packages and the contents must be retained for carriers inspection where necessary PAYMENT 1. Payment is strictly 30 days Net, unless otherwise agreed in writing and signed by a director of the company. 2. If payment is not made in accordance with the agreed terms, the buyer shall be deemed to be in default of payment and the Company shall be entitled without prejudice to any other rights it may have to charge interest at the rate of 8% above the Bank of England base rate, from time to time in force, until the amount owing is paid in full. The Company reserves the right to charge the buyer for any legal costs involved in connection with the recovery of outstanding amounts due. 3. Failure to make due payment of deliveries, under these terms, or any other contract between the buyer and the Company, shall entitle the Company to delay, suspend, or cancel deliveries in whole or in part at its option, or withdraw account facilities. 4. If account facilities are withdrawn, then all outstanding invoices will immediately fall due for payment, and a demand as such will be made at the time of withdrawal of these facilities

+44 (0) 1273 431600 +44 (0) 1273 439266 +44 (0) 1273 431612 +44 (0) 1273 439288 sales@metway.co.uk www.metway.co.uk

+44 (0) 1273 431600

RETENTION OF TITLE 1. The property and title to the goods shall remain with the Company, until such time as all sums owing for and in respect of the goods have been received from the buyer by the Company 2. Until such time, the buyer is required to store the goods in such a way, that they clearly remain the property of the Company.

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

+44 (0) 1273 431600

+44 (0) 1273 439288

sales@metway.co.uk

www.metway.co.uk

127


Metway Electromechanical Terminal Blocks

Ask about our comprehensive Electronic PCB Connectors, Transformers and Wiring Accessories catalogue.

Electromechanical Terminal Blocks

Ask about our Pre-fabricated Wiring Systems and Lighting Control catalogue.

Telephone: Sales Reception Accounts Fax: Email: Web:

+44 (0) 1273 431600 +44 (0) 1273 439266 +44 (0) 1273 431612 +44 (0) 1273 439288 sales@metway.co.uk www.metway.co.uk

DRAWINGS/DATA We shall make every effort to ensure the accuracy of technical details relating to our goods but we accept no liability in contract or tort or under statute or otherwise for any damages or injury arising directly or indirectly from any error or omission in such technical details whether caused by our negligence or otherwise. The Company reserves the right to amend and/or to improve designs at any time without notice.

www.metway.co.uk

Metway Electrical Industries Limited Barrie House 18 North Street Portslade East Sussex BN41 1DG

www.metway.co.uk Catalogue one

Electromechanical Terminal Blocks  

Electromechanical Terminal Blocks catalogue

Advertisement