Dealing with Water Infrastructure Problems Water service is in danger with problems brought about by old pipeline systems. The biggest problem that they bring is corrosion, which equates to water quality that does not meet industry and health standards. Corrosion disrupts the delivery of clean water to homes and businesses. With the water infrastructure in Australia showing its age, problems are emerging and better solutions necessary. Whenever corrosion happens, the ultimate solution is the replacement of the pipes. Outdated pipes made from steel turn problematic after some years. Exposure to the elements lead to rusting, which makes the pipelines unfit for water service. Not only will this result in hefty repairs, treated water is also wasted because of leakage due to corrosion and damage. When a leak occurs, it can stay undetected. However, the system will use more electricity to pump water to a pipeline. There will also be significant water loss because of this. Best Alternative When water pipelines suffer because of corrosion, the best solution is to replace the pipes with alternative pipe materials. Better alternatives to the aging pipelines of Australia include polyethylene pipes. PE pipes are known to be highly resistant to corrosion. Installing PE pipes in place of corrosive pipes will protect valuable investments in public works. Advantages of PE Pipelines PE pipes offer many benefits to water pipeline infrastructure. PE is made from durable and flexible plastic materials that are ideal for use underground. PE boasts long life, lasting for up to a hundred years once installed in trenches for delivery of clean water. Polyethylene has been proven to be highly resistant to chemicals and abrasion. When installed underground, pipes are exposed to various natural and chemical elements. They need to be built with durability in mind. PE pipes are weather resistant and UV resistant. The material is recommended for areas that undergo very high or very low temperatures. They can withstand temperatures reaching up to 100C and as low as -40C. PE pipes are very good to use for water distribution because they are hygienic, non-toxic and environmentally friendly. The pipes can be welded with joints that are tight and leak-free. This resolves problems caused by unknown leaks in the system.
Cost savings are realised when PE pipes are installed in place of old, rusting pipes. PE pipes are quick to manufacture and install. Because they are relatively light compared with other pipe materials, there are also cost savings obtained with the easy transport of these pipes. For more information on PE pipelines for water infrastructure, click here. http://www.reaygroup.com.au/
Published on May 30, 2013
Outdated pipeline systems in Australia are exhibiting serious problems such as water loss and costly repairs. PE pipelines are the best alte...