Page 1


User’s Manual Table of Contents SAFETY INSTRUCTIONS ……………………………………….………………….…2 STORAGE ……..……..…………………….…………..…………………….……….2 GENERAL INFORMATION ……………..……………..……………………………3 1. 2.

Main Feature.…………………………………...…………………..………….……….………..3 Accessories………………………………...………………………………..……………………3

3.

Panel..…………………………………………………………...…………..…………………….4

4.

Remote Control Unit…………………………………………..…………………………………5

INSTALLATION OF STB…................................………..………………………….6 1.

First Steps……………………...……………………..............…………………………………6

2.

Menu Information………………………………...……..……………………………….…….…6

3.

Q&A……………….……………………………………..…………………………………….6

THE MENU OPERATION…………………………….………………..………………7 1.

2.

3.

4.

Channel……………………………………………………...……………………………………7 1.1

TV Channel……………………………….……..…………………………………………7

1.2

Add Channel…………………………………………………………………………….10

Installation………………………………………………………………………………………11 2.1

Auto Scan……………………………………..…………………………….................11

2.2

Add Satellite……………………….……….………………………………………….…12

2.3

Edit Satellite…………………..…………………………………………………………..12

2.4

Delete Satellite………………..………………………………………………………….13

System………………………………………………………………………………………….13 3.1

Language…………………………………………………………………………………13

3.2

TV System ……………..……………………………………………………….………..13

3.3

Auto Shut Down……………………………………………………………………...14

3.4

OSD Setting………………………..……………..………………………………………14

3.5

Parent Lock……………………..………………………………………………………...14

Tools………………………………..……………………………………………………………15 4.1

Information………………………………………………………………………………..15

4.2

Satellite Guide……………………………,……………………………………………15

4.3

Default Value………………….……………………………………...........……………15

4.4

Software Upgrade………………………….………………..…………………………16

TECHNICAL SPECIFICTION…………………………………………………………17 TROUBLE SHOOTING…………..……………………………………………………18

1


User’s Manual SAFETY INSTRUCTIONS Please read these safety instructions through carefully, before operating the receiver. Please observe all warnings and instructions on the equipment and contained in these operating instructions. 1. 2. 3. 4. 5. 6.

7. 8. 9. 10.

Be sure to read this user’s manual before starting your operation. You must install the dish with correct direction and angle. If the receiver antenna is not working property, contact your local dealer. Never open the cover. It is very dangerous to touch the inside of the unit due to possible electric shock. Install the unit horizontally: Unbalanced installation may cause the unit to be damaged by itself. When you don’t use this unit for a long time. Please pull the power cord from the outlet. Also do not use a damaged power cord. When the unit is suddenly moved to a hot area from a cold area, it may cause problems. In that case, turn off the power, and turn on after 1-2 hours. Do not touch the power with wet hand. If there is liquid flowing into the unit, pull out the power cord immediately because fire or electric shock. Install the unit in a place with good ventilation suitable temperature no direct sunrays low humidity low vibration influence. Place the unit in a well ventilated and no heat environment. Do not put heavy objects on the unit.

If the receiver does not operate normally even after strictly following the instructions in this user manual, it is recommended to consult your dealer or the desired service / support. STORAGE Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep the packaging away from children. For transporting the receiver from one place to another or if you are returning it under warranty conditions, make sure to repack the receiver in its original packaging with its accessories. Failing to comply with such packaging procedures could void your warranty

2


User’s Manual GENERAL INFORMATION Incorporating the powerful single chip decoder, GXR-1600 is designed to provide FTA (Free-To-Air) change with user-friendly OSD (On Screen Display).This digital set top box demonstrates extremely high performance and cost-effectiveness, which makes it your best choice to enjoy the colorful digital life at home. 1.

Main Features Mini Size box with AV Connector (Video & Audio) MPEG-2 Digital and Fully DVB-S Compliant C/Ku Band Blind Scan User’ s Friendly OSD Menu with Full Function Installation by Easy Setup Guide 2500 TV Channels Multi Pictures up to 9 Multi Languages Support DisEqC 1.0/1.2 and 22KHz Tone 256 Color Graphic Switching Channel Search in Automatic, PID, NIT RS232 Port for Upgrading Software

2.

Accessories

Unpack the receiver and check to make sure that all of the following items are included in the packaging. 1* Remote Control Unit (RCU) 1* AV connect cable 2* Batteries (AAA Type) 1* Remote Control Receiving Cable. 1*User’s Manual

3


User’s Manual 3.

Panel

1. LNB IN: Digital satellite antenna connection port equipments. 2. RS232:RS232 port for Software upgrade. 3. DC IN: DC 12V/1A Input for Receiver. 4. IR: Connect to Remote Sensor Cable. 5. TV SCART Output: Video and audio connection port for TV or other equipments. 6. AV Output: Video and audio connection port for TV or other equipments.

4


User’s Manual 4. Remote Control Unit Remove the battery compartment cover and load two AAA (UM-4 or R03) batteries. Make sure that the batteries have been inserted in the correct polarities matching to the symbols +, - marked in the battery compartment. Close the battery compartment cover. If replacing of batteries is necessary, replace both batteries. Do not mix new and used batteries otherwise; the operation lifetime will be much shorter than normal. Remove the batteries if the unit will not be used for a prolonged period of time. Be Environmentally Friendly: Do not dispose batteries as normal rubbish. Please dispose batteries following the Government’s regulation. : Press to switch between Operation and Standby modes : Press to temporarily cut off the sound ADD: Use to prompt find channels soft by character. 0-9: Press to enter required numbers in the input box or select a channel PAUSE: Press to switch between Pause and Play RECALL: Return to the precious menu or status. TV/RADIO: Press to select between TV and Radio modes INFO: Press to show information of the current channel AUDIO: Press to display the Audio Setup window 9PIC: Press to select multi pictures. / : Press to Change channels, or move up or down in the menu. ▲/▼: Press to Change channels, or move up or down in the menu. ◄/►: Press to adjust volume level, or to move left or right in the menu. OK: Activates the highlighted menu item. Display the channel list in viewing mode according to the selected list. MENU: Press to display the Main Menu on the screen. LIST: Use to see the channel list. EXIT: Exits from the menu or sub-menu and cancels the progressing functions if applicable.

5


User’s Manual INSTALLATION OF STB First steps 1. Insert the plugs of the receiver and the auxiliary equipments in the power socket and switch them on. 2. Select the AV mode on the TV set. 3. The receiver is delivered with pre-programmed TV channels and can be used immediately. To see if there are any new channels, then activate the channel search. Menu Information The user interface has various ways to navigate through the menus and functions. Some of the keys on the remote control unit give direct access to functions. Then most important keys are identified as colored keys, MENU and OK. Other keys are multi-functional which means that their function changes dependent of the mode that you are in. 1. Use the ▲/▼ keys to move the cursor up or down from one line to another line. 2. Use the ◄/► key to move the cursor left or right from one line to another line. 3. Use the EXIT key to leave the menu and return to the view mode. 4. In a sub-menu: - use the ◄/► keys to select one from the preprogrammed options in the sub-menu. - use the OK key to confirm the selection. - The yellow cursor indicates the active selection Frequently Asked Question Q: The power of my STB has been turned on and not in Standby mode, but the TV screen showed nothing: A: Make sure the TV set has been set to the correct video input (not the TV channels). For example, if you have connected the unit with the Video 1 input of TV set has to be switched To Video 1. Q: The power of my STB has been turned on and not in Standby mode, but the TV screen showed nothing except: “NO Signal” message. A: This means the channel you have select has no signal, There could be several causes: 1. The channel which you select is not in your allocated satellite. The solution is to change the channel. 2. The signal of current TV channel is too weak. Try to switch to other strong signal channels. If the problems still exit, please consult your local dealer or other professionals for technical service. 3.

6

You have used the Dual LNB, and need modify LNB Type.


User’s Manual THE MENU OPERATION Once you have installed and connected the cables of the receiver, press menu key on the RCU to display the Main Menu. The Menu consists of 4 menu options as shown below:

1. Channel 2. Installation 3. System 4. Tools Use the ◄/► keys to move the cursor up or down in the menu. Use the OK key to confirm a selection. To escape the menu system at anytime, press EXIT key on the RCU.

1.

Channel

If there are some programs stored in the receiver, user can press OK to enter the menu. 1.1

TV Channel

You can manage the stored channels, TV and radio channels, deleting, shorting, locking, and skipping them very easily. Access to the editing channels screen, through the main menu: 1. 2. 3.

Press MENU to enter the main menu. The option Channel will be highlighted. Select TV Channel to manage the TV channels. Press OK, you will see the edition channels screen.

7


User’s Manual To delete a channel: 1.

In the edition channels screen, press “1” in the remote control. Locate the channel you want to delete, and press OK. The channel will be marked with the symbol “X”. 3. To confirm the deletion, press EXIT to exit the edition channels menu. You will see a confirmation message. 4. Pressing the arrow keys select option “OK” and press OK to confirm the deletion, or select Cancel and press OK to cancel. 2.

To move a channel: 1. 2.

3.

4.

In the edition channels screen, press “2” in the remote control. Pressing the arrow keys, select the channel you want to move and press OK. You will see the channels marked with the symbol. Pressing the arrow keys, locate the point you want to put the selected channel and press OK. Repeat step 2 and 3 for those channels you want to move.

To add channels to the favorite lists: 1.

2. 3.

8

In the edit channels screen, locate the channels you want to favorite and press “3” .You will notice the sub-menu with favorite order in screen. Select the desired one of the six favorite order, and press OK. The channel will be marked with the symbol.


User’s Manual To edit the channel:

1.

2. 3.

4.

In the edition channels screen, locate the channel you want to edit and press “4” in the Remote Control. You will notice the sub-menu in screen. You can press the arrow keys to select and use the numeric keys to input the value of parameter. Select Save to confirm them otherwise selects Exit to go back.

To delete all channels:

1.

In the edition channels screen, press “5” in the remote control.

2.

All channels will be marked with the symbol “X”.

3.

Pressing the arrow keys select option “OK” and press OK to confirm the deletion, or select Cancel and press OK to cancel.

9


User’s Manual 1.2 Add Channel In the channel menu, select the option Add Channel and press OK. Satellite: Press OK to deploy the satellite list. Select the satellite you want to check with pressing ▲/▼. Y ou can also press ◄/► to select the satellite. TP: Transponder, select the desired one from the preprogram options. TP Frequency: Input the value by using the numeric keys. Symbol rate: Symbol rate of the current transponder. Polarity: Vertical or Horizontal polarization. Search: Select the desired mode for searching.

Edit Satellite: Satellite: Press OK to deploy the satellite list. Select the satellite you want to check with pressing ▲/▼. You can also press ◄/► to select the satellite. LNB Type: select proper LNB type using the arrow keys according to your physical LNB type. Freq(1,2): Enter the proper LNB frequency referring to your LNB using the numeric keys on the RCU. LNB Power: Select the desired option. If your STB is connected to another receiver through LOOP THROUGH support, you should check which receiver is connected directly to the LNB. In case the other receiver is directly connected to the LNB, then select OFF. DisEqC: Select the port number to get the RF signal from the LNB, which is connected, to DisEqC switching box. Positioner: Satellite position. Is your antenna is positioned incorrectly, you will not receive signal from the satellite. So the STB provides DiSEqC1.2 to let you have exact information to direct your antenna toward a satellite

10


User’s Manual Information Move to the Desired Direction Satellite: Select the desired satellite. TP: Select the desired transponder. Position No. & Save: Select the position No. or null. Limit Setup: Setting of limits for the antenna. Movement: The satellite can now be turned into the desired direction using the arrow buttons. Continuous Move: The satellite can be continuous Go to Reference: A starting point for the satellite search Function can be selected by pressing the OK button. Add TP: Add a new transponder for the current satellite. Delete TP: Delete the current transponder. Recalculation: Press OK to recalculate.

2.

Installation

2.1 Auto Scan 1.

4.

Press OK to enter the Auto Scan menu. 2. Press OK to deploy the satellite list. Select the satellite you want to scan with pressing ▲/▼. The satellite will be marked with the symbol “X”. You can also press ◄/► to select the satellite. 3. Select the desired mode for searching and then press OK to start search channel automatically. You can also enter the Edit Satellite to reset the current Satellite

11


User’s Manual 2.2 Add Satellite Satellite: Press OK to enter the submenu, and rename the name of the new satellite. Press MENU to exit this menu. LNB Type: Select proper LNB type using the arrow keys according to your physical LNB type. LNB Freq(1,2): Enter the proper LNB frequency referring to your LNB using the numeric keys on the RCU. LNB Power: Select the desired option. If your STB is connected to another receiver through LOOP THROUGH support, you should check which receiver is connected directly to the LNB. In case the other receiver is directly connected to the LNB, then select OFF. DisEqC: Select the port number to get the RF signal from the LNB, which is connected, to DisEqC 2.3 Edit Satellite Satellite: Press OK to deploy the satellite list. Select the satellite you want to scan with pressing▲/▼. You can also press ◄/► to select the satellite. LNB Type: Select proper LNB type using the arrow keys according to your physical LNB type. LNB Freq(1,2): Enter the proper LNB frequency referring to your LNB using the numeric keys on the RCU. LNB Power: Select the desired option. If your STB is connected to another receiver through LOOP THROUGH support, you should check which receiver is connected directly to the LNB. In case the other receiver is directly connected to the LNB, then select OFF. DiSEqC: Select the port number to get the RF signal from the LNB, which is connected, to DiSEqC switching box. Positioner: To set satellite position.

12


User’s Manual 2.4 Delete Satellite 1.

5.

Press OK to enter the Delete Satellite menu. 2. Locate the satellite you want to delete, and press OK. The satellite will be marked with the symbol “X”. 3. Repeat step 2 with those satellite you want to delete. 4. To confirm the deletion, press EXIT to exit the edition satellite menu. You will see a confirmation message. Pressing the arrow keys select option “OK” and press OK to confirm the deletion, or select Cancel and press OK to cancel.

3. System 3.1 Language

Select the desired language for menu.

3.2

TV System

You can set the TV type by pressing the arrow keys. If the source program is PAL, TV set PAL, source program is NTSC, and TV set NTSC.

13


User’s Manual 3.3

Auto Shut Down

To set the time for stopping work automatically

3.4

OSD setting

Menu Color: Allows you to select the desired color for menu. Transparence: You can adjust the transparency level by using the arrow keys. From 0% to 80%.

3.5

Parent Lock This function allows you to lock the channel with a password in order to prevent children from accessing the channel. You can also protect your installed data and information using the Install Lock. If the STB Parent Lock item is set to OFF, the keys of the default password is 0000. When the correct password is entered, the selected menu opens automatically.

4.

14

Tools


User’s Manual 4.1 Information

You can get the information of the current channel from here.

4.2 Satellite Guide

Antenna will be display on the screen.

4.3

Default Value

Local Longitude: Enter the correct value of local longitude. Local Latitude: Enter the correct value of the local latitude. Satellite Longitude: Enter the longitude of the current satellite. Start: Press OK.

15


User’s Manual 4.4

Software Upgrade This option allows you to restore the parameter to the original state. Be careful when you use this option, because you will lose date. By this function, you can upgrade software via RS-232 serial port. Upgrade Mode: Select the desired upgrade mode from code, logo, program list and all. Start upgrade: After you press OK key, STB will reboot for upgrade.

16


User’s Manual TECHNICAL SPECIFICATION Tuner Input Frequency

950 to 2150MHz

Input Level

-65 to -25 dBm

LNB Supply

13V/18V/OFF, Max 400mA

Demodulation Type

QPSK

Symbol Rate

4~<45MS/s

AUDIO/VIDEO PROCESSING Audio Standard

ISO/IEC 13818-3

Audio Channel

Mute, Left, Right and Stereo

Audio Decoding

MPEG-1 & MPEG-2 layer Ⅰand Ⅱ

Video Standard

ISO/IEC 13812-2,MPEG-2

Aspect Ratio

4:3

Video Resolution

720X576(PAL),720X480(NTSC)

Video Format

4:3

MP@ML

POWER SUPPLY Type

Switching mode

Input voltage

100-240V,50/60HZ

Power consumption

35W max

PHYSICAL CHARACTERSTICS Rear Panel 1 LNB Input 1 Loop out 1 RF out Connectors 2X Audio L/R(RCA) 1XVideo SIGNAL(RCA) 1X RS-232(9-pin D-sub male)

17


User’s Manual TROUBLE SHOOTING Problem The display on the front panel does not light up

Possible Cause

Main cable is not connected

What To Do Check that the main cable is plugged into power socket

No sound or picture, but the front panel red

The unit is in standby mode

Press the standby button

light is ON The satellite dish is not pointing at the satellite

Adjust the dish. Check the Signal Lever in the Antenna Setup menu Check the cable connections,

No sound or picture

LNB and other equipment No signal or weak signal

connected between the LNB and the receiver, and/or adjust the dish

The satellite dish is not pointing at the satellite

Bad picture/

Signal is too strong

Blocking error Satellite dish is too small

No picture appears on the TV screen The RCU is not working

Connect a signal attenuator to the LNB input Change to an LNB with lower noise a factor

The LNB is faulty

Change the LNB

TV is not in AV/EXT mode

your system and tune the UHF

Check the UHF channel fixed

in

channel properly Battery exhausted

RCU is incorrectly aimed

18

Adjust the dish

Change the battery Aim the RCU at the unit, or check that nothing blocks the front panel


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

GENX

‫ﺗﺤﺬﻳﺮﺍﺕ ﺗﺤﺬﻳﺮﺍﺕ ﺍﺿﺎﻓﻴﺔ‬

- The device should not be

exposed to dripping and sprayed it and not put things filled with fluid(such as vases) - Batteries (whether Plugged or packed) should not be exposed to excessive heat such as sunshine, fire - The Plug is the main power source or device disconnect cable or Link must be kept ready for accessibility - Warning replace your battery (lithium) (risk of explosion) if you replace the battery in an improper manner (only replace the same quality) - the device should be connected to a socket that has grounding connector

‫ﺍﻟﺠﻬﺎﺯ ﻳﺠﺐ ﺃﻥ ﻻ ﻳﺘﻌﺮﺽ‬ ‫ﻟﻠﺘﻨﻘﻴﻂ ﻭﻟﻠﺮﺵ ﻭﺍﻻ ﺗﻮﺿﻊ ﻋﻠﻴﻪ‬ ‫ﺍﺷﻴﺎء ﻣﻤﻠﻮءﺓ ﺑﺎﻟﺴﻮﺍﺋﻞ ) ﻣﺜﻞ‬ ( ‫ﺍﻟﻔﺎﺯﺍﺕ‬ ‫ﺍﻟﺒﻄﺎﺭﻳﺎﺕ ) ﺳﻮﺍء ﻛﺎﻧﺖ ﻣﺮﻛﺒﺔ‬ ‫ﺃﻭ ﻣﺤﺰﻭﻣﺔ ( ﻳﺠﺐ ﺃﻥ ﻻ‬ ‫ﺗﺘﻌﺮﺽ ﻟﻠﺤﺮﺍﺭﺓ ﺍﻟﺰﺍﺋﺪﺓ ﻣﺜﻞ‬ ‫ﺃﺷﻌﺔ ﺍﻟﺸﻤﺲ ﻭﺍﻟﺤﺮﻳﻖ‬ ‫ﺍﻟﻘﺎﺑﺲ ﻣﺼﺪﺭ ﺍﻟﻜﻬﺮﺑﺎء‬ ‫ﺍﻟﺮﺋﻴﺴﻲ ﺃﻭ ﻗﺎﺭﻥ ﺍﻟﺠﻬﺎﺯ ﻛﺄﺩﺍﺓ‬ ‫ﺍﻟﻔﺼﻞ ﻳﺠﺐ ﺃﻥ ﻳﺒﻘﻰ ﺟﺎﻫﺰ‬ ‫ﻷﻣﻜﺎﻧﻴﺔ ﺍﻟﺘﺸﻐﻴﻞ‬ ‫ﺍﻟﺘﺤﺬﻳﺮ ﺍﻟﺨﺎﺹ ﺑﺎﺳﺘﺒﺪﺍﻝ‬ ‫ﺑﻄﺎﺭﻳﺔ ) ﺍﻟﻠﻴﺜﻴﻮﻡ ( ) ﺧﻄﺮ‬ ‫ﺍﻻﻧﻔﺠﺎﺭ ( ﺇﺫﺍ ﺍﺳﺘﺒﺪﻟﺖ ﺍﻟﺒﻄﺎﺭﻳﻪ‬ ‫ﺑﻄﺮﻳﻘﺔ ﻏﻴﺮ ﺳﻠﻴﻤﺔ ) ﺗﺴﺘﺒﺪﻝ‬ ( ‫ﻓﻘﻂ ﺑﻨﻔﺲ ﺍﻟﻨﻮﻋﻴﺔ‬ ‫ﻳﺠﺐ ﺗﻮﺻﻴﻞ ﺍﻟﺠﻬﺎﺯ ﺑﻤﻘﺒﺲ‬ ‫ﻳﺤﺘﻮﻱ ﻋﻠﻰ ﻣﻮﺻﻞ ﺗﺄﺭﻳﺾ‬

-

-

-

-

-

21


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﺍﻟﻤﺸﺎﻛﻞ ﺍﻟﻔﻨﻴﺔ‪:‬‬ ‫ﻣﺎﺫﺍ ﻳﻤﻜﻨﻚ ﻋﻤﻠﻪ؟‬

‫ﺍﻟﺤﺎﻟﺔ ﺍﻟﻤﺤﺘﻤﻠﺔ‬

‫ﺍﻟﻤﺸﻜﻠﺔ‬

‫ﻣﻘﺒﺲ ﺍﻟﻄﺎﻗﺔ ﺍﻟﺮﺋﻴﺴﻲ ﺇﻟﻰ ﺍﻟﻜﺎﺑﻞ ﻣﻦ ﺗﻮﺻﻴﻞ ﺗﺤﻘﻖ‬

‫ﺍﻟﻜﺎﺑﻞ ﺍﻟﺮﺋﻴﺴﻲ ﻏﻴﺮ ﻣﻮﺻﻞ‬

‫ﺗﻈﻬﺮ ﻻ ﺍﻟﻠﻮﺣﺔ ﺍﻷﻣﺎﻣﻴﺔ ﺍﻟﺸﺎﺷﺔ ﻋﻠﻰ‬

‫ﺍﺿﻐﻂ ﺯﺭ ﺍﻟﺘﺸﻐﻴﻞ‬

‫ﺍﻟﻘﻄﻌﺔ ﻓﻲ ﺣﺎﻟﺔ ﺳﺒﺎﺕ ﻣﺆﻗﺖ‬

‫ﺃﻭ ﺻﻮﺭﺓ ‪ ،‬ﻻﻳﻮﺟﺪ ﺃﻱ ﺻﻮﺕ‬ ‫ﺍﻟﻠﻮﺣﺔ ﻟﻜﻦ ﺍﻟﻀﻮء ﺍﻻﺣﻤﺮﻋﻠﻰ‬ ‫ﻓﻌﺎﻝ ﺍﻷﻣﺎﻣﻴﺔ‬

‫ﺍﺿﺒﻂ ﺍﻟﺼﺤﻦ ﺍﻟﻼﻗﻂ ﺛﻢ ﺍﻓﺤﺺ ﻗﻮﺓ ﺍﻻﺷﺎﺭﺓ ﻓﻲ‬ ‫ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﺮﺋﻴﺴﻴﺔ‬

‫ﺍﻟﺼﺤﻦ ﺍﻟﻼﻗﻂ ﻏﻴﺮ ﻣﻮﺻﻞ ﺑﺎﻟﺮﻳﺴﻴﻔﺮ‬

‫ﺍﻟﻜﺎﺑﻼﺕ ‪ ،‬ﻭﺻﻼﺕ ﺗﺤﻘﻖ ﻣﻦ‬ ‫ﻭﻏﻴﺮﻫﺎ ﻣﻦ ﺍﻟﻤﻌﺪﺍﺕ ‪LNB‬‬ ‫‪ LNB‬ﺑﻴﻦ ﺍﻻﺗﺼﺎﻝ‬

‫ﻻﻳﻮﺟﺪ ﺃﻱ ﺻﻮﺕ ﺃﻭ ﺻﻮﺭﺓ‬ ‫ﻻﻳﻮﺟﺪ ﺍﺷﺎﺭﺓ ‪ ,‬ﺍﻭ ﻳﻮﺟﺪ ﺍﺷﺎﺭﺓ ﺿﻌﻴﻔﺔ‬

‫ﺍﻟﻄﺒﻖ ﻭﺍﻟﻤﺘﻠﻘﻲ‪ ،‬ﺃﻭﺿﺒﻂ‬ ‫ﺍﺿﺒﻂ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ‬

‫ﺍﻟﺼﺤﻦ ﺍﻟﻼﻗﻂ ﻏﻴﺮ ﻣﻮﺻﻞ ﺑﺎﻟﺮﻳﺴﻴﻔﺮ‬

‫ﻣﺨﻔﻒﺗﻮﺻﻴﻞ‬ ‫ﺍ‬ ‫‪ LNB‬ﻣﺪﺧﻞ ﺍﻝ ﺍﻹﺷﺎﺭﺓ ﺇﻟﻰ‬

‫ﺍﻻﺷﺎﺭﺓ ﻗﻮﻳﺔ ﺟﺪﺍً‬

‫ﻏﻴﺮ ‪ LNB‬ﺑﺎﻗﻞ ﺿﺠﻴﺞ ﻣﻦ ﺍﻟﻤﺼﻨﻊ‬

‫ﺍﻟﺼﺤﻦ ﺍﻟﻼﻗﻂ ﺻﻐﻴﺮ ﺟﺪﺍً‬

‫ﻏﻴﺮ ‪LNB‬‬

‫ﻣﺰﻭﺩ ‪ LNB‬ﻻﻳﻌﻤﻞ‬

‫ﺻﻮﺭﺓ ﺳﻴﺌﺔ ﺃﻭ ﻣﺘﻘﻄﻌﺔ‬

‫ﺗﺤﻘﻖ ﻣﻦﻗﻨﺎﺓ ‪ UHF‬ﺍﻟﺜﺎﺑﺘﺔ ﻓﻲ ﺍﻟﻨﻈﺎﻡ ﺍﻟﺨﺎﺹ ﺑﻚ‬ ‫ﻭﺗﻮﻟﻴﻒ ﻗﻨﺎﺓ ‪ UHF‬ﺑﺸﻜﻞ ﺻﺤﻴﺢ‬

‫ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ﻟﻴﺲ ﻓﻲ ﻭﺿﻊ ‪AV/EXT‬‬

‫ﻻﻳﻮﺟﺪ ﺻﻮﺭﺓ ﺗﻈﻬﺮ ﻋﻠﻰ ﺍﻟﺸﺎﺷﺔ‬

‫ﺍﻟﺮﺟﺎء ﺗﻐﻴﻴﺮ ﺍﻟﺒﻄﺎﺭﻳﺎﺕ‬

‫ﺍﻟﺒﻄﺎﺭﻳﺔ ﻓﺎﺭﻏﺔ‬

‫ﺟﻬﺎﺯ ﺍﻟﺘﺤﻜﻢ ﻻﻳﻌﻤﻞ‬

‫ﺍﻟﺮﺟﺎء ﺗﻮﺟﻴﻪ ﺍﻟﺠﻬﺎﺯ ﻋﻠﻰ ﺍﻟﺤﺴﺎﺱ ﺍﻟﻤﻮﺟﻮﺩ ﻓﻲ‬ ‫ﺍﻟﺮﻳﺴﻴﻔﺮ ﻣﺒﺎﺷﺮﺓ‬

‫ﺟﻬﺎﺯ ﺍﻟﺘﺤﻜﻢ ﻻ ﻳﺒﺚ ﺍﺷﺎﺭﺓ‬

‫‪20‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX‬‬

‫ﺍﻟﻤﻮﺍﺻﻔﺎﺕ ﺍﻟﺘﻘﻨﻴﺔ‪:‬‬ ‫ﺍﻟﻤﻮﻟﻒ‬ ‫‪950 to 2150MHz‬‬

‫ﺗﺮﺩﺩ ﺍﻻﺩﺧﺎﻝ‬

‫‪-65 to -25 dBm‬‬

‫ﻣﺴﺘﻮﻯ ﺍﻻﺩﺧﺎﻝ‬

‫‪13V/18V/OFF,max 400mA‬‬

‫ﻣﺰﻭﺩ ‪LNB‬‬

‫‪QPSK‬‬

‫ﻧﻤﻂ ﺍﻻﺳﺘﺨﻼﺹ‬

‫‪4~<45MS/s‬‬

‫ﻣﻌﺪﻝ ﺍﻟﺘﺮﻣﻴﺰ‬

‫ﻣﻌﺎﻟﺠﺔ ﺍﻟﺼﻮﺕ ﻭﺍﻟﺼﻮﺭﺓ‬ ‫‪ISO/IEC 13818-3‬‬

‫ﺍﻟﺼﻮﺕ ﺍﻟﻘﻴﺎﺳﻲ‬

‫ﻛﺘﻢ‪-‬ﻳﺴﺎﺭ ﻭﻳﻤﻴﻦ ‪ -‬ﺳﺘﻴﺮﻳﻮ‬

‫ﻗﻨﺎﺓ ﺍﻟﺼﻮﺕ‬

‫‪MPEG-1 & MPEG-2 layer Ⅰand Ⅱ‬‬

‫ﺗﺮﻣﻴﺰ ﺍﻟﺼﻮﺕ‬

‫‪ISO/IEC 13812-2,MPEG-2 MP@ML‬‬

‫ﺍﻟﻔﻴﺪﻳﻮ ﺍﻟﻘﻴﺎﺳﻲ‬

‫‪4:3‬‬

‫ﻧﺴﺒﺔ ﺍﻟﺠﺎﻧﺐ‬

‫)ﺳﻴﻜﺎﻡ(‪),720X480‬ﺑﺎﻝ(‪720X576‬‬

‫ﺩﻗﺔ ﺍﻟﻔﻴﺪﻳﻮ‬

‫‪4:3‬‬

‫ﺗﻬﻴﺌﺔ ﺍﻟﻔﻴﺪﻳﻮ‬

‫ﻣﺰﻭﺩ ﺍﻟﻄﺎﻗﺔ‬ ‫ﺣﺎﻟﺔ ﺍﻟﺘﺒﺪﻳﻞ )ﻣﻔﺘﺎﺡ(‬

‫ﺍﻟﻨﻤﻂ‬

‫‪100-240V,50/60HZ‬‬

‫ﻣﺪﺧﻞ ﺍﻟﻔﻮﻟﻄﻴﺔ‬

‫ﻛﺤﺪ ﺍﻗﺼﻰ ‪18W‬‬

‫ﺍﻟﻄﺎﻗﺔ‬

‫ﺍﻟﻤﻮﺍﺻﻔﺎﺕ ﺍﻟﻔﻴﺰﻳﺎﺋﻴﺔ‬ ‫ﺍﻟﻠﻮﺣﺔ ﺍﻟﺨﻠﻔﻴﺔ‬ ‫ﻣﺪﺧﻞ ‪1 LNB‬‬ ‫ﻣﺨﺮﺝ ﺍﻟﺤﻠﻘﺔ ‪1‬‬ ‫ﻣﺨﺮﺝ ‪1 RF‬‬ ‫)‪2X Audio L/R(RCA‬‬ ‫)‪1XVideo SIGNAL(RCA‬‬ ‫)‪1X RS-232(9-pin D-sub male‬‬

‫‪19‬‬

‫ﺍﻟﻤﻮﺻﻼﺕ‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﺍﻟﻘﻴﻤﺔ ﺍﻻﻓﺘﺮﺍﺿﻴﺔ‬ ‫ﺧﻄﻮﻁ ﺍﻟﻄﻮﻝ ﺍﻟﻤﺤﻠﻴﺔ ‪ :‬ﺃﺩﺧﻞ ﺍﻟﻘﻴﻤﺔ ﺍﻟﺼﺤﻴﺤﺔ‬ ‫ﻟﺨﻄﻮﻁ ﺍﻟﻄﻮﻝ ﺍﻟﻤﺤﻠﻴﺔ‪.‬‬ ‫ﺧﻄﻮﻁ ﺍﻟﻌﺮﺽ ﺍﻟﻤﺤﻠﻴﺔ ‪ :‬ﺃﺩﺧﻞ ﺍﻟﻘﻴﻤﺔ‬ ‫ﺍﻟﺼﺤﻴﺤﺔ ﻟﺨﻄﻮﻁ ﺍﻟﻤﺤﻠﻴﺔ‪.‬‬ ‫ﺧﻂ ﺍﻟﻄﻮﻝ ﺍﻟﻔﻀﺎﺋﻴﺔ ‪ :‬ﺃﺩﺧﻞ ﺍﻟﻄﻮﻝ ﻣﻦ ﺍﻷﻗﻤﺎﺭ‬ ‫ﺍﻟﺼﻨﺎﻋﻴﺔ ﺍﻟﺤﺎﻟﻴﺔ‪.‬‬ ‫ﻟﻠﺒﺪء ‪ :‬ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ‪.‬‬

‫ﺗﺤﺪﻳﺚ ﺍﻟﺒﺮﻣﺠﻴﺎﺕ ‪:‬‬ ‫‪ -‬ﺑﻮﺍﺳﻄﺔ ﻫﺬﻩ ﺍﻟﻮﻇﻴﻔﺔ ‪ ،‬ﻳﻤﻜﻨﻚ ﺗﻄﻮﻳﺮ‬

‫ﺍﻟﺒﺮﻣﺠﻴﺎﺕ ﻋﺒﺮ ﺍﻝﻣﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ ‪. RS -‬‬ ‫‪232‬‬

‫ ﺗﺮﻗﻴﺔ ﺍﻝﻭﺿﻊ ‪ :‬ﺣﺪﺩ ﺍﻟﻨﻤﻂ ﺍﻟﻤﻄﻠﻮﺏ ﻣﻦ‬‫ﺍﻟﺘﺮﻗﻴﺔ ﺭﻣﺰ ﺃﻭ ﺷﻌﺎﺭ ‪ ،‬ﻭﺟﻤﻴﻊ ﻗﺎﺋﻤﺔ‬ ‫ﺍﻟﺒﺮﺍﻣﺞ ‪.‬‬

‫‪-‬ﺑﺪء ﺍﻟﺘﺮﻗﻴﺔ ‪ :‬ﺑﻌﺪ ﺍﻝﺿﻐﻂ‬

‫ﻋﻠﻰﻣﻔﺘﺎﺡ ﻣﻮﺍﻓﻖ ‪ ،‬ﻭﺳﻮﻑ ﻳﺒﺪﺃ ﺍﻟﺮﻳﺴﻴﻔﺮﺑﺎﻟﺘﺮﻗﻴﺔ ‪.‬‬

‫‪18‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬ ‫ﻗﻔﻞ ﺍﻟﻮﺍﻟﺪﻳﻦ‪:‬‬ ‫ﻫﺬﻩ ﺍﻟﻮﻇﻴﻔﺔ ﺗﺴﻤﺢ ﻟﻚ ﺏﻗﻔﻞ ﺍﻟﻘﻨﺎﺓ ﺑﻜﻠﻤﺔ ﻣﺮﻭﺭ‬ ‫ﻟﻤﻨﻊ ﺍﻷﻃﻔﺎﻝ ﻣﻦ ﺍﻟﻮﺻﻮﻝ ﺇﻟﻰ ﺍﻟﻘﻨﺎﺓ ‪.‬‬ ‫ﻳﻤﻜﻨﻚ ﺃﻳﻀﺎ ﺣﻤﺎﻳﺔ ﺍﻟﺒﻴﺎﻧﺎﺕ ﻭﺍﻟﻤﻌﻠﻮﻣﺎﺕ‬ ‫ﺍﻟﻤﺜﺒﺘﺔ ﺑﺎﺳﺘﺨﺪﺍﻡ ﻗﻔﻞ ﺗﺜﺒﻴﺖ ‪.‬‬ ‫ﺇﺫﺍ ﺗﻢ ﺗﻌﻴﻴﻦ ﻗﻔﻞ ﺍﻷﺻﻞ ‪ STB‬ﺍﻟﺒﻨﺪ ﺇﻟﻰ ‪، OFF‬‬ ‫ﺳﻴﺘﻢ ﺍﺑﻄﺎﻝ ﻣﻔﺎﺗﻴﺢ ﺍﻟﻠﻮﺣﺔ ﺍﻷﻣﺎﻣﻴﺔ ‪.‬‬ ‫ﻛﻠﻤﺔ ﺍﻟﻤﺮﻭﺭ ﺍﻻﻓﺘﺮﺍﺿﻲ ﻫﻮ ‪. 0000‬ﻋﻨﺪ‬ ‫ﺇﺩﺧﺎﻝ ﻛﻠﻤﺔ ﺍﻟﻤﺮﻭﺭ ﺍﻟﺼﺤﻴﺤﺔ ‪ ،‬ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﻤﺨﺘﺎﺭﺓ ﺳﺖﻓﺘﺢ ﺗﻠﻘﺎﺋﻴﺎ ‪.‬‬

‫ﺍﻻﺩﻭﺍﺕ‪:‬‬ ‫ﻣﻌﻠﻮﻣﺎﺕ‬ ‫ﻳﻤﻜﻨﻚ ﺍﻟﺤﺼﻮﻝ ﻋﻠﻰ ﻣﻌﻠﻮﻣﺎﺕ ﻋﻦ ﺍﻟﻘﻨﺎﺓ‬ ‫ﺍﻟﺤﺎﻟﻴﺔ ﻣﻦ ﻫﻨﺎ‪.‬‬

‫ﻣﺮﺷﺪ ﺍﻻﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ‪:‬‬ ‫ﺳﻴﻈﻬﺮ ﺍﻟﻬﻮﺍﺋﻲ ﻋﻠﻰ ﺍﻟﺸﺎﺷﺔ‪.‬‬

‫‪17‬‬

‫‪GENX GXR1600‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﻧﻈﺎﻡ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ‪:‬‬

‫ﻳﻤﻜﻨﻚ ﺗﻌﻴﻴﻦ ﻧﻮﻉ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ﻋﻦ ﻃﺮﻳﻖ ﺍﻟﻀﻐﻂ‬ ‫ﻋﻠﻰ ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ‪ .‬ﺇﺫﺍ ﻛﺎﻥ‬ ‫ﺍﻟﺒﺮﻧﺎﻣﺞ ﺍﻟﻤﺼﺪﺭ ‪ ،PAL‬ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ‪PAL‬‬ ‫‪ ،‬ﺑﺮﻧﺎﻣﺞ ﺍﻟﻤﺼﺪﺭ‪, NTSC‬ﺳﻴﻜﻮﻥ‬ ‫ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ‪. NTSC‬‬

‫ﺍﻻﻏﻼﻕ ﺍﻟﺘﻠﻘﺎﺋﻲ‪:‬‬

‫ﻟﻀﺒﻂ ﺍﻟﻮﻗﺖ ﻟﻮﻗﻒ ﺍﻟﻌﻤﻞ ﺗﻠﻘﺎﺋﻴﺎ‬

‫ﺍﻋﺪﺍﺩ ﻧﻈﺎﻡ ﺍﻟﺘﺸﻐﻴﻞ‪:‬‬

‫ﻟﻮﻥ ﺍﻟﻘﺎﺋﻤﺔ ‪ :‬ﻳﻤﻜﻨﻚ ﻣﻦ ﺍﺧﺘﻴﺎﺭ‬ ‫ﺍﻟﻠﻮﻥ ﺍﻟﻤﻄﻠﻮﺏ ﻝﻟﻘﺎﺋﻤﺔ‪.‬‬ ‫ﺍﻟﺸﻔﺎﻓﻴﺔ ‪ :‬ﻳﻤﻜﻨﻚ ﺿﺒﻂ‬ ‫ﻣﺴﺘﻮﻯ ﺍﻟﺸﻔﺎﻓﻴﺔ ﺑﺎﺳﺘﺨﺪﺍﻡ ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ ‪.‬ﻣﻦ‬ ‫‪ ٪ 0‬ﺇﻟﻰ ‪.٪ 80‬‬

‫‪16‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﻣﻔﺎﺗﻴﺢ ﺭﻗﻤﻴﺔ ﻋﻠﻰ ﺟﻬﺎﺯ ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ‪.‬‬ ‫‪ LNB‬ﺍﻝﻣﺤﺘﺮﻑ ‪ :‬ﺣﺪﺩ ﺍﻟﺨﻴﺎﺭ ﺍﻟﻤﻄﻠﻮﺏ‪ .‬ﺇﺫﺍ ﻛﺎﻥ ﻣﺘﺼﻼ ﺑﺮﻳﺴﻴﻔﺮ ﺃﺧﺮ ﻣﻦ ﺧﻼﻝ ﺍﺳﺘﻘﺒﺎﻝ ﻳﺘﻜﺮﺭ‬ ‫ﺧﻼﻝ ﺍﻟﺪﻋﻢ‪ ،‬ﻳﺠﺐ ﻋﻠﻴﻚ ﺍﻟﺘﺤﻘﻖ ﻡﻥ ﺍﻥ ﺍﻟﺮﻳﺴﻴﻔﺮ ﻳﺮﺗﺒﻂ ﻣﺒﺎﺷﺮﺓ ﺇﻟﻰ ‪ .LNB‬ﻓﻲ‬ ‫ﺣﺎﻟﺔ ﺗﻮﺻﻴﻞ ﺟﻬﺎﺯ ﺍﻻﺳﺘﻘﺒﺎﻝ ﻣﺒﺎﺷﺮﺓ ﺃﺧﺮﻯ ﺇﻟﻰ ‪ ،LNB‬ﺛﻢ ﺣﺪﺩ ‪.OFF‬‬ ‫ﺩﺍﻳﺴﻚ ‪ :‬ﺣﺪﺩ ﺭﻗﻢ ﺍﻟﻤﻨﻔﺬ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺇﺷﺎﺭﺓ ﺍﻟﺘﺮﺩﺩﺍﺕ ﺍﻟﻼﺳﻠﻜﻴﺔ ﻣﻦ‪ ،LNB‬ﻭﻫﺬﺍ‬ ‫ﻣﺮﺗﺒﻂ ﺇﻟﻰ ﻣﺮﺑﻊ ﺍﻟﺘﺒﺪﻳﻞ ﺍﻝﺩﺍﻳﺴﻚ ‪.‬‬ ‫ﺍﻟﻤﻮﻗﻊ ‪ :‬ﻣﻮﻗﻊ ﺍﻟﻔﻀﺎﺋﻴﺔ‪ .‬ﺍﺫﺍﺗﻢ ﻭﺿﻊ ﺍﻟﻬﻮﺍﺋﻲ ﺍﻟﺨﺎﺹ ﺑﻚ ﺑﺸﻜﻞ ﻏﻴﺮ ﺻﺤﻴﺢ ‪ ،‬ﻟﻦ ﺗﺘﻠﻘﻰ ﺍﻹﺷﺎﺭﺓ‬ ‫ﻣﻦ ﺍﻷﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ‪ .‬ﺑﺤﻴﺚ ﻳﻮﻓﺮ ‪ DiSEqC1.2 STB‬ﻟﻠﺴﻤﺎﺡ ﻟﺪﻳﻚ ﺏﻣﻌﻠﻮﻣﺎﺕ‬ ‫ﺩﻗﻴﻘﺔ ﻟﺘﻮﺟﻴﻪ ﺍﻟﻬﻮﺍﺋﻲ ﺍﻟﺨﺎﺹ ﻧﺤﻮ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ‬ ‫ﻟﺤﺬﻑ ﻗﻤﺮ ﺻﻨﺎﻋﻲ‬ ‫‪ .1‬ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻟﺪﺧﻮﻝ ﻗﺎﺋﻤﺔ ﺍﻟﻘﻨﻮﺍﺕ ﺍﻟﻔﻀﺎﺋﻴﺔ ﺛﻢ ﺣﺬﻑ‪.‬‬ ‫‪ .2‬ﺗﺤﺪﻳﺪ ﻣﻮﻗﻊ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ ﺍﻟﺬﻱ ﺗﺮﻳﺪ ﺣﺬﻓﻪ‪،‬‬ ‫ﺛﻢ ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ‪ .‬ﻭﺳﻴﺘﻢ ﻭﺿﻊ ﻋﻼﻣﺔ‬ ‫ﻋﻠﻰ ﺍﻷﻗﻤﺎﺭ ﺍﻻﺻﻄﻨﺎﻋﻴﺔ ﻣﻊ ﺍﻟﺮﻣﺰ "‪."X‬‬ ‫‪ .3‬ﻛﺮﺭ ﺍﻟﺨﻄﻮﺓ ‪ 2‬ﻣﻊ ﺗﻠﻚ ﺍﻷﻗﻤﺎﺭ‬ ‫ﺍﻟﺼﻨﺎﻋﻴﺔ ﺍﻟﺘﻲ ﺗﺮﻳﺪ ﺣﺬﻓﻬﺎ‪.‬‬ ‫‪ .4‬ﻟﺘﺄﻛﻴﺪ ﺍﻟﺤﺬﻑ‪ ،‬ﺍﺿﻐﻂ ‪ EXIT‬ﻟﻠﺨﺮﻭﺝ ﻣﻦ‬ ‫ﻗﺎﺋﻤﺔ ﺍﻻﻗﻤﺎﺭﺍﻟﻔﻀﺎﺋﻴﺔ ‪ .‬ﺳﺘﺮﻯ ﺭﺳﺎﻟﺔ ﺗﺄﻛﻴﺪ‪.‬‬ ‫‪ .5‬ﺍﻟﻀﻐﻂ ﻋﻠﻰ ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ ﺗﺤﺪﻳﺪ ﺍﻟﺨﻴﺎﺭ‬ ‫"ﻣﻮﺍﻓﻖ" ﻭﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻟﺘﺄﻛﻴﺪ ﺍﻟﺤﺬﻑ ‪ ،‬ﺃﻭ‬ ‫ﺣﺪﺩ ﺇﻟﻐﺎء ﻭﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻹﻟﻐﺎء ﺍﻟﻌﻤﻠﻴﺔ‪.‬‬

‫ﺍﻟﻨﻈﺎﻡ‬ ‫ﺍﻟﻠﻐﺔ‪:‬‬

‫ﺣﺪﺩ ﺍﻟﻠﻐﺔ ﺍﻟﻤﻄﻠﻮﺑﺔ ﻣﻦ ﻗﺎﺋﻤﺔ ﺍﻟﻠﻐﺔ‪.‬‬

‫‪15‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﻣﺴﺢﻫﺎ ﻣﻊ ﺍﻟﻀﻐﻂ ‪ ▲ / ▼.‬ﻭﺳﻴﺘﻢ ﻭﺿﻊ ﻋﻼﻣﺔ ﻋﻠﻰ ﺍﻷﻗﻤﺎﺭ ﺍﻻﺻﻄﻨﺎﻋﻴﺔ‬ ‫ﻣﻊ ﺍﻝﺭﻣﺰ "‪ "X‬ﻳﻤﻜﻨﻚ ﺃﻳﻀﺎ ﺍﻟﻀﻐﻂ ► ‪ ◄ /‬ﻟﺘﺤﺪﻳﺪ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ‪.‬‬ ‫‪ -3‬ﺣﺪﺩ ﺍﻟﻮﺿﻊ ﺍﻟﻤﻄﻠﻮﺏ ﻟﻠﺒﺤﺚ ﻭﻣﻦ ﺛﻢ ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻟﺒﺪء ﺑﺤﺚ ﺍﻟﻘﻨﺎﺓ ﺗﻠﻘﺎﺋﻴﺎ‪.‬‬ ‫‪ -4‬ﻳﻤﻜﻨﻚ ﺃﻳﻀﺎ ﺇﺩﺧﺎﻝ ﺍﻟﻘﻨﻮﺍﺕ ﺍﻟﻔﻀﺎﺋﻴﺔ ﻹﻋﺎﺩﺓ ﺗﺤﺮﻳﺮ ﺍﻷﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ ﺍﻟﺤﺎﻟﻴﺔ‪.‬‬

‫ﺍﺿﺎﻓﺔ ﻗﻤﺮ ﺻﻨﺎﻋﻲ‪:‬‬ ‫ﺍﻷﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ ‪ :‬ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻟﺪﺧﻮﻝ‬ ‫ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﻔﺮﻋﻴﺔ‪ ،‬ﻭﺇﻋﺎﺩﺓ ﺗﺴﻤﻴﺔ ﺍﺳﻢ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ‬ ‫ﺍﻟﺠﺪﻳﺪ ‪.‬ﺍﺿﻐﻂ‪ MENU‬ﻟﻠﺨﺮﻭﺝ ﻣﻦ ﻫﺬﻩ ﺍﻟﻘﺎﺋﻤﺔ‪.‬‬ ‫ﺍﻟﻨﻮﻉ ‪ LNB‬ﺍﺧﺘﺮ ﻧﻮﻉ ‪ LNB‬ﺍﻟﻤﻨﺎﺳﺒﺔ ﺑﺎﺳﺘﺨﺪﺍﻡ‬ ‫ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ ﻭﻓﻘﺎ ﻟﻨﻮﻉ ‪ LNB‬ﺍﻟﻤﺎﺩﻳﺔ‪.‬‬ ‫ﺍﻟﺘﻜﺮﺍﺭ ‪(1،2) LNB :‬‬ ‫ﺃﺩﺧﻞ ﺗﺮﺩﺩ ‪ LNB‬ﺍﻟﻤﻨﺎﺳﺐ ﻣﺸﻴﺮﺍ‬ ‫ﺍﻟﻰ ‪ LNB‬ﺍﻟﺨﺎﺹ ﺑﺎﺳﺘﺨﺪﺍﻡ‬ ‫ﺍﻝﻣﻔﺎﺗﻴﺢ ﺍﻝﺭﻗﻤﻴﺔ ﻋﻠﻰ ﺟﻬﺎﺯ ﺍﻟﺘﺤﻜﻢ‪.‬‬ ‫‪LNB‬ﺍﻝﻣﺤﺘﺮﻑ ‪ :‬ﺣﺪﺩ ﺍﻟﺨﻴﺎﺭ ﺍﻟﻤﻄﻠﻮﺏ ‪.‬ﺇﺫﺍ ﻛﺎﻥ ﻣﺘﺼﻼ ﺑﺮﻳﺴﻴﻔﺮ ﺃﺧﺮ ﻣﻦ ﺧﻼﻝ ﺍﺳﺘﻘﺒﺎﻝ ﻳﺘﻜﺮﺭ‬ ‫ﺧﻼﻝ ﺍﻟﺪﻋﻢ‪ ،‬ﻳﺠﺐ ﻋﻠﻴﻚ ﺍﻟﺘﺤﻘﻖ ﻡ ﻥ ﺍﻥ ﺍﻟﻤﺘﻠﻘﻲ ﻳﺮﺗﺒﻂ ﻣﺒﺎﺷﺮﺓ ﺇﻟﻰ ‪ LNB.‬ﻓﻲ ﺣﺎﻟﺔ ﺗﻮﺻﻴﻞ ﺟﻬﺎﺯ‬ ‫ﺍﻻﺳﺘﻘﺒﺎﻝ ﻣﺒﺎﺷﺮﺓ ﺃﺧﺮﻯ ﺇﻟﻰ‪ ، LNB‬ﺛﻢ ﺣﺪﺩ‪OFF.‬‬ ‫ﺩﺍﻳﺴﻚ ‪ :‬ﺣﺪﺩ ﺭﻗﻢ ﺍﻟﻤﻨﻔﺬ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺇﺷﺎﺭﺓ ﺍﻟﺘﺮﺩﺩﺍﺕ ﺍﻟﻼﺳﻠﻜﻴﺔ ﻣﻦ‪ ، LNB‬ﻭﻫﺬﺍ‬ ‫ﻣﺮﺗﺒﻂ ﺇﻟﻰ ﺩﺍﻳﺴﻚ‪.‬‬ ‫ﻟﺘﺤﺮﻳﺮ ﻗﻤﺮ ﺻﻨﺎﻋﻲ‪:‬‬ ‫ﺍﻷﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ ‪ :‬ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ‬ ‫ﻟﻨﺸﺮ ﻗﺎﺋﻤﺔ ﺍﻷﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ‪ .‬ﺣﺪﺩ ﺍﻝﻓﻀﺎﺋﻴﺔ‬ ‫ﺍﻟﺬﻱ ﺗﺮﻏﺐ ﻓﻲ‬ ‫ﺍﻟﺘﺤﻘﻖ ﻣﻊ ﺍﻟﻀﻐﻂ ▲ ‪.▼ /‬ﻳﻤﻜﻨﻚ ﺃﻳﻀﺎ‬ ‫ﺍﻟﻀﻐﻂ ◄ ‪ ► /‬ﻟﺘﺤﺪﻳﺪ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ‪ .‬ﺍﻟﻨﻮﻉ‬ ‫‪ : LNB‬ﺍﺧﺘﺮ ﻧﻮﻉ ‪ LNB‬ﺍﻟﻤﻨﺎﺳﺒﺔ ﺑﺎﺳﺘﺨﺪﺍﻡ‬ ‫ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ ﻭﻓﻘﺎ ﻟﻨﻮﻉ ‪ LNB‬ﺍﻟﻤﺎﺩﻳﺔ‪.‬‬ ‫ﺍﻟﺘﻜﺮﺍﺭ )‪: (1،2‬‬ ‫ﺃﺩﺧﻞ ﺗﺮﺩﺩ ‪ LNB‬ﺍﻟﻤﻨﺎﺳﺐ ﻣﺸﻴﺮﺍ‬ ‫ﺍﻟﻰ ‪ LNB‬ﺍﻟﺨﺎﺹ ﺑﺎﺳﺘﺨﺪﺍﻡ‬

‫‪14‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﺍﻟﻤﻮﻗﻊ ‪ :‬ﻣﻮﻗﻊ ﺍﻟﻔﻀﺎﺋﻴﺔ‪ .‬ﺍﺫﺍﺗﻢ ﻭﺿﻊ ﺍﻟﻬﻮﺍﺋﻲ ﺍﻟﺨﺎﺹ ﺑﻚ ﺑﺸﻜﻞ ﻏﻴﺮ ﺻﺤﻴﺢ ‪ ،‬ﻟﻦ ﺗﺘﻠﻘﻰ ﺍﻹﺷﺎﺭﺓ‬ ‫ﻣﻦ ﺍﻷﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ‪ .‬ﺑﺤﻴﺚ ﻳﻮﻓﺮ ‪ DiSEqC1.2 STB‬ﻟﻠﺴﻤﺎﺡ ﻟﺪﻳﻚ ﺏﻣﻌﻠﻮﻣﺎﺕ‬ ‫ﺩﻗﻴﻘﺔ ﻟﺘﻮﺟﻴﻪ ﺍﻟﻬﻮﺍﺋﻲ ﺍﻟﺨﺎﺹ ﻧﺤﻮ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ‬ ‫ﺍﻟﻤﻌﻠﻮﻣﺎﺕ‬ ‫ﺍﻻﻧﺘﻘﺎﻝ ﺇﻟﻰ ﺍﻻﺗﺠﺎﻩ ﺍﻟﻤﻄﻠﻮﺏ‬ ‫ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ ‪ :‬ﺣﺪﺩ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ‬ ‫ﺍﻟﻤﻄﻠﻮﺏ‪.‬‬ ‫‪:TP‬ﺣﺪﺩ ﺍﻝﻣﺴﺘﺠﻴﺐ ﺍﻟﻤﻄﻠﻮﺏ‪.‬‬ ‫ﺭﻗﻢ ﺍﻟﻤﻮﻗﻊ ﻭﺣﻔﻆ ‪ :‬ﺍﺧﺘﺮ ﺭﻗﻢ ﺍﻟﻤﻮﻗﻊ‬ ‫ﺃﻭ ﺍﺗﺮﻛﻪ ﻓﺎﺭﻍ‪.‬‬ ‫ﺍﻟﺘﺮﻛﻴﺐ ﺍﻟﻤﺤﺪﻭﺩ ‪ :‬ﻭﺿﻊ ﺣﺪﻭﺩ ﺍﻟﻬﻮﺍﺋﻲ‪.‬‬ ‫ﺍﻟﺤﺮﻛﺔ ‪ :‬ﻳﻤﻜﻦ ﺗﺤﺮﻳﻚ ﺍﻟﻘﻤﺮ‬ ‫ﺍﻟﺼﻨﺎﻋﻲ ﻓﻲ ﺍﻻﺗﺠﺎﻩ ﺍﻟﻤﻄﻠﻮﺏ ﺑﺎﺳﺘﺨﺪﺍﻡ‬ ‫ﺃﺯﺭﺍﺭ ﺍﻷﺳﻬﻢ‪.‬‬ ‫ﺍﺳﺘﻤﺮﺍﺭﺍﻝﻧﻘﻞ ‪ :‬ﺍﻟﻨﻘﻞ ﻟﻸﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ ﻳﻤﻜﻦ ﺃﻥ ﻳﻜﻮﻥ ﻣﺴﺘﻤﺮﺍ‪.‬‬ ‫ﻣﺮﺟﻌﻲ ‪ :‬ﻳﻤﻜﻦ ﺗﺤﺪﻳﺪ ﻧﻘﻄﺔ ﺍﻧﻄﻼﻕ ﻟﻠﺒﺤﺚ ﻓﻲ ﻭﻇﻴﻔﺔ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ ﻋﻦ‬ ‫ﺓ‬ ‫ﺍﻧﺘﻘﻞ ﺇﻟﻰ ﻧﻘﻄﺔ‬ ‫ﻃﺮﻳﻖ ﺍﻟﻀﻐﻂ ﻋﻠﻰ ﺯﺭ ﻣﻮﺍﻓﻖ‪.‬‬ ‫ﺇﺿﺎﻓﺔ‪: TP‬ﺇﺿﺎﻓﺔ ﺗﻲ ﺑﻲ ﺟﺪﻳﺪﺓ ﻟﺒﺎﻗﺔ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ ﺍﻟﺤﺎﻟﻲ‬ ‫ﺍﻟﺤﺎﻟﻲ‪.‬‬ ‫ﺓ‬ ‫ﺣﺬﻑ ‪ TP‬ﺣﺬﻑ ﺍﻝﺑﺎﻗﺔ‬ ‫ﺇﻋﺎﺩﺓ ﺍﻟﺤﺴﺎﺏ ‪ :‬ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻹﻋﺎﺩﺓ ﺣﺴﺎﺏ‪.‬‬

‫ﺍﻟﺘﺮﻛﻴﺐ‪:‬‬ ‫ﺍﻟﻤﺴﺢ ﺍﻷﻟﻲ‪:‬‬ ‫‪ -1‬ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ‬ ‫ﻗﺎﺋﻤﺔ ﺍﻟﻤﺴﺢ ﺍﻟﺘﻠﻘﺎﺋﻲ‪.‬‬ ‫‪ -2‬ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻟﻨﺸﺮ ﻗﺎﺋﻤﺔ ﺍﻷﻗﻤﺎﺭ‬ ‫ﺍﻟﺼﻨﺎﻋﻴﺔ ‪.‬ﺣﺪﺩﺍﻝﻓﻀﺎﺋﻴﺔ ﺗﺮﻳﺪ‬

‫‪13‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﺍﺿﺎﻓﺔ ﻗﻨﺎﺓ‪:‬‬ ‫ﻓﻲ ﻗﺎﺋﻤﺔ ﺍﻟﻘﻨﻮﺍﺕ ﺣﺪﺩ ﺍﻟﺨﻴﺎﺭ ﺇﺿﺎﻓﺔ ﺍﻟﻘﻨﺎﺓ ﻭﺍﺿﻐﻂ‬ ‫ﻣﻮﺍﻓﻖ ﺍﻷﻗﻤﺎﺭﺍﻟﺼﻨﺎﻋﻴﺔ ‪ :‬ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ‬ ‫ﻟﻨﺸﺮ ﻗﺎﺋﻤﺔ ﺍﻷﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ ‪.‬ﺣﺪﺩﺍﻝﻓﻀﺎﺋﻴﺔ ﺗﺮﻏﺐ‬ ‫ﻓﻲ ﺍﻟﺘﺤﻘﻖ ﻣﻊ ﺍﻟﻀﻐﻂ‪ ▲ / ▼.‬ﻳﻤﻜﻨﻚ ﺃﻳﻀﺎ‬ ‫ﺍﻟﻀﻐﻂ‪ ► ◄ /‬ﻟﺘﺤﺪﻳﺪ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ‪.‬‬ ‫ﺑﺎﻗﺔ ‪ :TP‬ﺣﺪﺩ ﻭﺍﺣﺪ ﻣﻦ‬

‫ﺍﻟﻤﻄﻠﻮﺏ‪.‬‬ ‫ﺓ‬ ‫ﺍﻟﺨﻴﺎﺭﺍﺕ‬

‫‪TP‬ﺍﻟﺘﺮﺩﺩ ‪ :‬ﺇﺩﺧﺎﻝ ﺍﻟﻘﻴﻤﺔ ﺑﺎﺳﺘﺨﺪﺍﻡ‬ ‫ﺍﻝﻣﻔﺎﺗﻴﺢ ﺍﻝﺭﻗﻤﻴﺔ‪.‬‬ ‫ﻣﻌﺪﻝ ﺍﻟﺮﻣﺰ ‪ :‬ﻣﻌﺪﻝ ﺍﻟﺮﻣﺰ ﻣﻦ ﺍﻝﻣﺴﺘﺠﻴﺐ ﺍﻟﺤﺎﻟﻲ‪.‬‬

‫ﺍﻻﺳﺘﻘﻄﺎﺏ ‪ :‬ﺍﻻﺳﺘﻘﻄﺎﺏ ﺍﻟﺮﺃﺳﻲ ﺃﻭ ﺍﻷﻓﻘﻲ‪.‬‬ ‫ﺑﺤﺚ ‪ :‬ﺣﺪﺩ ﺍﻟﻮﺿﻊ ﺍﻟﻤﻄﻠﻮﺏ ﻟﻠﺒﺤﺚ‪.‬‬ ‫ﻟﺘﺤﺮﻳﺮ ﻗﻤﺮ ﺻﻨﺎﻋﻲ‪:‬‬ ‫ﺍﻷﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ ‪ :‬ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ‬ ‫ﻟﻨﺸﺮ ﻗﺎﺋﻤﺔ ﺍﻷﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ‪ .‬ﺣﺪﺩ ﺍﻝﻓﻀﺎﺋﻴﺔ‬ ‫ﺍﻟﺬﻱ ﺗﺮﻏﺐ ﻓﻲ‬ ‫ﺍﻟﺘﺤﻘﻖ ﻣﻊ ﺍﻟﻀﻐﻂ ▲ ‪.▼ /‬ﻳﻤﻜﻨﻚ ﺃﻳﻀﺎ‬ ‫ﺍﻟﻀﻐﻂ ◄ ‪ ► /‬ﻟﺘﺤﺪﻳﺪ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ‪ .‬ﺍﻟﻨﻮﻉ‬ ‫‪ : LNB‬ﺍﺧﺘﺮ ﻧﻮﻉ ‪ LNB‬ﺍﻟﻤﻨﺎﺳﺒﺔ ﺑﺎﺳﺘﺨﺪﺍﻡ‬ ‫ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ ﻭﻓﻘﺎ ﻟﻨﻮﻉ ‪ LNB‬ﺍﻟﻤﺎﺩﻳﺔ‪.‬‬ ‫ﺍﻟﺘﻜﺮﺍﺭ )‪: (1،2‬‬ ‫ﺃﺩﺧﻞ ﺗﺮﺩﺩ ‪ LNB‬ﺍﻟﻤﻨﺎﺳﺐ ﻣﺸﻴﺮﺍ‬ ‫ﺍﻟﻰ ‪ LNB‬ﺍﻟﺨﺎﺹ ﺑﺎﺳﺘﺨﺪﺍﻡ‬ ‫ﻣﻔﺎﺗﻴﺢ ﺭﻗﻤﻴﺔ ﻋﻠﻰ ﺟﻬﺎﺯ ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ‪.‬‬ ‫‪ LNB‬ﺍﻝﻣﺤﺘﺮﻑ ‪ :‬ﺣﺪﺩ ﺍﻟﺨﻴﺎﺭ ﺍﻟﻤﻄﻠﻮﺏ‪ .‬ﺇﺫﺍ ﻛﺎﻥ ﻣﺘﺼﻼ ﺑﺮﻳﺴﻴﻔﺮ ﺃﺧﺮ ﻣﻦ ﺧﻼﻝ ﺍﺳﺘﻘﺒﺎﻝ ﻳﺘﻜﺮﺭ‬ ‫ﺧﻼﻝ ﺍﻟﺪﻋﻢ‪ ،‬ﻳﺠﺐ ﻋﻠﻴﻚ ﺍﻟﺘﺤﻘﻖ ﻡﻥ ﺍﻥ ﺍﻟﺮﻳﺴﻴﻔﺮ ﻳﺮﺗﺒﻂ ﻣﺒﺎﺷﺮﺓ ﺇﻟﻰ ‪ .LNB‬ﻓﻲ‬ ‫ﺣﺎﻟﺔ ﺗﻮﺻﻴﻞ ﺟﻬﺎﺯ ﺍﻻﺳﺘﻘﺒﺎﻝ ﻣﺒﺎﺷﺮﺓ ﺃﺧﺮﻯ ﺇﻟﻰ ‪ ،LNB‬ﺛﻢ ﺣﺪﺩ ‪.OFF‬‬ ‫ﺩﺍﻳﺴﻚ ‪ :‬ﺣﺪﺩ ﺭﻗﻢ ﺍﻟﻤﻨﻔﺬ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺇﺷﺎﺭﺓ ﺍﻟﺘﺮﺩﺩﺍﺕ ﺍﻟﻼﺳﻠﻜﻴﺔ ﻣﻦ‪ ،LNB‬ﻭﻫﺬﺍ‬ ‫ﻣﺮﺗﺒﻂ ﺇﻟﻰ ﻣﺮﺑﻊ ﺍﻟﺘﺒﺪﻳﻞ ﺍﻝﺩﺍﻳﺴﻚ ‪.‬‬

‫‪12‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫ﻟﺘﺤﺮﻳﺮ ﻗﻨﺎﺓ‪:‬‬ ‫‪ -1‬ﻓﻲ ﺷﺎﺷﺔ ﺍﻝﻗﻨﻮﺍﺕ ‪،‬ﻳﺠﺐ ﺗﺤﺪﻳﺪ ﺍﻟﻘﻨﺎﺓ ﺍﻟﺘﻲ ﺗﺮﻳﺪ‬ ‫ﺗﻌﺪﻳﻠﻬﺎ ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ "‪ "4‬ﻓﻲ ﺟﻬﺎﺯ ﺍﻟﺘﺤﻜﻢ ﻋﻦ‬ ‫ﺑﻌﺪ‪.‬‬ ‫‪-2‬ﺳﺘﻼﺣﻆ ﻇﻬﻮﺭ ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﻔﺮﻋﻴﺔ ﻓﻲ ﺍﻟﺸﺎﺷﺔ‪.‬‬ ‫‪ -3‬ﻳﻤﻜﻨﻚ ﺍﻟﻀﻐﻂ ﻋﻠﻰ ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ‬ ‫ﻟﺘﺤﺪﻳﺪ ﻭﺍﺳﺘﺨﺪﻡ ﺍﻝﻣﻔﺎﺗﻴﺢ‬ ‫ﺍﻝﺭﻗﻤﻴﺔ ﻹﺩﺧﺎﻝ ﻗﻴﻤﺔ ﻣﻌﻠﻤﺔ‪.‬‬ ‫‪ -4‬ﺣﺪﺩ ﺣﻔﻆ ﻟﻠﺘﺄﻛﺪ ﻣﻨﻬﺎ ﻭﺍﺧﺘﺎﺭ ﺇﻧﻬﺎء ﻟﻠﻌﻮﺩﺓ‪.‬‬ ‫ﻟﺤﺬﻑ ﺟﻤﻴﻊ ﺍﻟﻘﻨﻮﺍﺕ‪:‬‬

‫‪ -1‬ﻓﻲ ﺷﺎﺷﺔﺍﻝﻗﻨﻮﺍﺕ ‪ ،‬ﺍﺿﻐﻂ ﻋﻠﻰ "‪ "5‬ﻓﻲ ﺟﻬﺎﺯ‬ ‫ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ‪.‬‬ ‫‪ -2‬ﺳﺘﺘﻤﻴﺰ ﺟﻤﻴﻊ ﺍﻟﻘﻨﻮﺍﺕ ﻣﻊ ﺍﻝﺭﻣﺰ‪. "X‬‬ ‫‪ -3‬ﻳﺮﺟﻰ ﺍﻟﻀﻐﻂ ﻋﻠﻰ ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ‬ ‫ﻭ ﺗﺤﺪﻳﺪ ﺍﻟﺨﻴﺎﺭ" ﻣﻮﺍﻓﻖ "ﻭﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ‬ ‫ﻟﺘﺄﻛﻴﺪ ﺍﻟﺤﺬﻑ ‪ ،‬ﺃﻭ ﺣﺪﺩ ﺇﻟﻐﺎء ﻭﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻹﻟﻐﺎء‬ ‫ﺍﻟﻌﻤﻠﻴﺔ‪.‬‬

‫‪11‬‬

‫‪GENX GXR1600‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﻟﺤﺬﻑ ﻗﻨﺎﺓ‪:‬‬ ‫‪ -1‬ﻓﻲ ﺷﺎﺷﺔ ﺍﻝﻗﻨﻮﺍﺕ ‪ ،‬ﺍﺿﻐﻂ ﻋﻠﻰ "‪ "1‬ﻓﻲ ﺟﻬﺎﺯ‬ ‫ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ‪.‬‬ ‫‪ -2‬ﻗﻢ ﺏ ﺗﺤﺪﻳﺪ ﺍﻟﻘﻨﺎﺓ ﺍﻟﺘﻲ ﺗﺮﻳﺪ ﺣﺬﻓﻬﺎ‪ ،‬ﺛﻢ‬ ‫ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ‪.‬ﻭﺳﺘﺘﻤﻴﺰ ﺍﻟﻘﻨﺎﺓ ﻣﻊ ﺭﻣﺰ"‪. "X‬‬ ‫‪ -3‬ﻟﺘﺄﻛﻴﺪ ﺍﻟﺤﺬﻑ‪ ،‬ﺍﺿﻐﻂ ‪ EXIT‬ﻟﻠﺨﺮﻭﺝ ﻣﻦ ﻗﺎﺋﻤﺔ‬ ‫ﺍﻟﻘﻨﻮﺍﺕ ‪.‬ﺳﺘﺮﻯ ﺭﺳﺎﻟﺔ ﺗﺄﻛﻴﺪ‪.‬‬ ‫ﻝﺗﺤﺪﻳﺪ ﺍﻟﺨﻴﺎﺭ‬ ‫‪ -4‬ﺍﺿﻐﻂ ﻋﻠﻰ ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ‬ ‫ﺃﻭ‬ ‫ﺍﻟﺤﺬﻑ ‪،‬‬ ‫"ﻣﻮﺍﻓﻖ "ﻭﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻟﺘﺄﻛﻴﺪ‬ ‫ﺣﺪﺩ ﺇﻟﻐﺎء ﻭﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ ﻹﻟﻐﺎء ﺍﻟﻌﻤﻠﻴﺔ‪.‬‬ ‫ﻟﺘﺤﺮﻳﻚ ﻗﻨﺎﺓ‪:‬‬ ‫‪ -1‬ﻓﻲ ﺷﺎﺷﺔ ﺍﻝﻗﻨﻮﺍﺕ ‪ ،‬ﺍﺿﻐﻂ ﻋﻠﻰ "‪ "2‬ﻓﻲ ﺟﻬﺎﺯ‬ ‫ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ‪.‬‬ ‫‪ -2‬ﻳﺮﺟﻰ ﺍﻟﻀﻐﻂ ﻋﻠﻰ ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ‪ ،‬ﺣﺪﺩ ﺍﻟﻘﻨﺎﺓ‬ ‫ﺍﻟﺘﻲ ﺗﺮﻏﺐ ﻓﻲ ﺍﻻﻧﺘﻘﺎﻝ ﺍﻟﻰ ﺍﻟﺘﺤﺮﻙ ﻭﺍﺿﻐﻂ‬ ‫ﻣﻮﺍﻓﻖ ‪.‬ﻭﺳﻮﻑ ﺗﺸﺎﻫﺪ ﺍﻟﻘﻨﻮﺍﺕ ﺍﻟﺘﻲ‬ ‫ﺗﺤﻤﻞ ﺍﻟﺮﻣﺰ"‪. "X‬‬ ‫‪ -3‬ﻳﺮﺟﻰ ﺍﻟﻀﻐﻂ ﻋﻠﻰ ﻣﻔﺎﺗﻴﺢ ﺍﻷﺳﻬﻢ ‪،‬‬ ‫ﻭﺗﺤﺪﻳﺪ ﺍﻟﻨﻘﻄﺔ ﺍﻟﺘﻲ ﺗﺮﻳﺪ ﺃﻥ ﺗﻀﻊ ﺍﻟﻘﻨﺎﺓ ﺍﻟﻤﺨﺘﺎﺭﺓ‬ ‫ﻭﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ‪.‬‬ ‫‪ -4‬ﻛﺮﺭ ﺍﻟﺨﻄﻮﺓ ‪ 2‬ﻭ ‪ 3‬ﻟﺘﻠﻚ ﺍﻟﻘﻨﻮﺍﺕ ﺍﻟﺘﻲ ﺗﺮﻳﺪ ﻧﻘﻠﻬﺎ‪.‬‬

‫ﻻﺿﺎﻓﺔ ﻗﻨﻮﺍﺕ ﻟﻠﻮﺍﺋﺢ ﺍﻟﻤﻔﻀﻠﺔ‪:‬‬ ‫‪ .1‬ﻓﻲ ﺷﺎﺷﺔ ﺗﺤﺮﻳﺮ ﺍﻟﻘﻨﻮﺍﺕ‪ ،‬ﺣﺪﺩ ﺍﻟﻘﻨﻮﺍﺕ ﺍﻟﺘﻲ‬ ‫ﺗﺮﻳﺪ ﺍﺿﺎﻓﺘﻬﺎ ﻟﻠﻤﻔﻀﻠﺔ ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ‬ ‫"‪ ."3‬ﺳﺘﻼﺣﻆ ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﻔﺮﻋﻴﺔ ﻣﻊ ﺍﻟﻨﻈﺎﻡ ﺍﻟﻤﻔﻀﻞ‬ ‫ﻓﻲ ﺍﻟﺸﺎﺷﺔ‪.‬‬ ‫‪ .2‬ﺍﺧﺘﻴﺎﺭ ﻻﺋﺤﺔ ﻭﺍﺣﺪﺓ ﻣﻦ ﺃﺻﻞ ﺳﺖ ﻟﻮﺍﺋﺢ ﻣﻔﻀﻠﺔ‬ ‫ﻟﺪﻳﻚ ‪ ،‬ﻭﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ‪.‬‬ ‫‪ .3‬ﻭﺳﺘﺘﻤﻴﺰ ﺍﻟﻘﻨﺎﺓ ﻣﻊ ﺍﻟﺮﻣﺰ"‪. "X‬‬

‫‪10‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬ ‫ﺍﻟﻮﻛﻴﻞ ﺍﻟﻤﺤﻠﻲ ﺃﻭ ﻏﻴﺮﻫﻢ ﻣﻦ‬

‫ﻗﻮﻳﺔ ‪.‬ﺇﺫﺍ ﻛﺎﻥ ﻻ ﻳﺰﺍﻝ ﺍﻟﺨﺮﻭﺝ ﺍﻟﻤﺸﺎﻛﻞ‪ ،‬ﻳﺮﺟﻰ ﺍﻟﺮﺟﻮﻉ ﺇﻟﻰ‬ ‫ﺍﻟﻤﻬﻨﻴﻴﻦ ﻟﻠﺨﺪﻣﺔ ﺍﻟﺘﻘﻨﻴﺔ‪.‬‬ ‫‪ -3‬ﺗﻜﻮﻥ ﻗﺪ ﺍﺳﺘﺨﺪﻣﺖ ﻓﻲ ‪ LNB‬ﻣﺰﺩﻭﺝ ‪ ،‬ﻭﺗﺤﺘﺎﺝ ﺇﻟﻰ ﺗﻌﺪﻳﻞ ﻧﻮﻉ ﺍﻝ‪LNB‬‬

‫ﻋﻤﻠﻴﺔ ﺍﻟﻘﺎﺋﻤﺔ‪:‬‬

‫ﺔ ﻋﻠﻰ ﻭﺣﺪﺓ‬ ‫ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ ﺳﻴﺘﻢ ﻋﺮﺽ ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﺮﺋﻴﺴﻴﺔ‪.‬‬ ‫ﺍﻟﻘﺎﺋﻤﺔ ﺗﺘﺄﻟﻒ ﻣﻦ ﺍﻟﺨﻴﺎﺭﺍﺕ ﺍﻻﺭﺑﻌﺔ ﻛﻤﺎ ﻫﻮ ﻣﺒﻴﻦ ﺃﺩﻧﺎﻩ ‪:‬‬ ‫ﺍﻟﻘﻨﺎﺓ ‪1.‬‬ ‫ﺍﻟﺘﺮﻛﻴﺐ ‪2.‬‬ ‫ﺍﻟﻨﻈﺎﻡ ‪3.‬‬ ‫‪4.‬‬ ‫ﺍﻻﺩﻭﺍﺕ‬

‫ﺍﺳﺘﺨﺪﺍﻡ ﻣﻔﺎﺗﻴﺢ ►‪◄/‬ﻟﺘﺤﺮﻳﻚ ﺍﻟﻤﺆﺷﺮ ﺍﺳﻔﻞ ﺃﻭ ﺃﻋﻠﻰ‬ ‫ﻓﻲ ﺍﻟﻘﺎﺋﻤﺔ ‪.‬ﺍﺳﺘﺨﺪﺍﻡ ﻣﻔﺘﺎﺡ ﻣﻮﺍﻓﻖ ﻟﺘﺄﻛﻴﺪ ﺍﻟﺘﺤﺪﻳﺪ‪.‬‬ ‫ﻟﻠﺨﺮﻭﺝ ﻣﻦ ﻧﻈﺎﻡ ﺍﻟﻘﺎﺋﻤﺔ ﻓﻲ ﺃﻱ ﻭﻗﺖ‪ ،‬ﺍﺿﻐﻂ ﻋﻠﻰ‬ ‫ﻣﻔﺘﺎﺡ ﺍﻟﺨﺮﻭﺝ ﻋﻠﻰ ﺟﻬﺎﺯ ﺍﻟﺘﺤﻜﻢ‪.‬‬

‫ﺍﻟﻘﻨﺎﺓ‪:‬‬ ‫ﺇﺫﺍ ﻛﺎﻥ ﻫﻨﺎﻙ ﺑﻌﺾ ﺍﻟﺒﺮﺍﻣﺞ ﺍﻟﻤﺨﺰﻧﺔ ﻓﻲ ﺟﻬﺎﺯ ﺍﻻﺳﺘﻘﺒﺎﻝ ‪ ،‬ﻳﻤﻜﻦ ﻟﻠﻤﺴﺘﺨﺪﻡ ﺍﻟﻀﻐﻂ ﻟﻠﺪﺧﻮﻝ‬ ‫ﺇﻟﻰ ﺍﻟﻘﺎﺋﻤﺔ‪.‬‬ ‫ﻗﻨﺎﺓ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ‪:‬‬ ‫ﻳﻤﻜﻨﻚ ﺇﺩﺍﺭﺓ ﺗﺨﺰﻳﻦ ﺍﻟﻘﻨﻮﺍﺕ ‪ ،‬ﻭﺍﻟﻘﻨﻮﺍﺕ ﺍﻟﺘﻠﻔﺰﻳﻮﻧﻴﺔ ﻭﺍﻹﺫﺍﻋﻴﺔ‪،‬‬ ‫ﻭﺣﺬﻓﻬﺎ ﻭﻧﻘﻠﻬﺎ‪ ،‬ﻗﻔﻠﻬﺎ ﻭﺗﺨﻄﻲﻫﺎ ﺑﺴﻬﻮﻟﺔ ﺑﺎﻟﻐﺔ‪.‬‬ ‫ﻳﺘﻢ ﺍﻟﻮﺻﻮﻝ ﺇﻟﻰ ﺷﺎﺷﺔ ﺗﺤﺮﻳﺮ ﻗﻨﻮﺍﺕ ‪ ،‬ﻣﻦ‬ ‫ﺧﻼﻝ ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﺮﺋﻴﺴﻴﺔ‪:‬‬ ‫‪ -1‬ﺍﺿﻐﻂ ‪MENU‬ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﺮﺋﻴﺴﻴﺔ‪.‬‬ ‫‪ -2‬ﻭﺳﻴﺘﻢ ﺗﺴﻠﻴﻂ ﺍﻟﻀﻮء ﻋﻠﻰ ﺍﻟﻘﻨﺎﺓ ﺍﻟﻤﺨﺘﺎﺭﺓ‪.‬‬ ‫‪ -3‬ﺣﺪﺩ ﻗﻨﺎﺓ ﻹﺩﺍﺭﺓ ﻗﻨﻮﺍﺕ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ‪.‬ﺍﺿﻐﻂ ﻣﻮﺍﻓﻖ‬ ‫ﻟﺘﺸﺎﻫﺪ ﺷﺎﺷﺔﺍﻝﻗﻨﻮﺍﺕ‪.‬‬

‫‪9‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﺗﺮﻛﻴﺐ ﺍﻟﺮﻳﺴﻴﻔﺮ‪:‬‬ ‫ﺍﻟﺨﻄﻮﺍﺕ ﺍﻷﻭﻟﻰ‪:‬‬ ‫‪ .1‬ﺇﺩﺭﺍﺝ ﺍﻟﻤﻘﺎﺑﺲ ﻣﻦ ﺍﻟﺮﻳﺴﻴﻔﺮ ﻭﺍﻟﻤﻌﺪﺍﺕ ﺍﻟﻤﺴﺎﻋﺪﺓ ﻓﻲ ﻣﻘﺒﺲ ﺍﻟﻜﻬﺮﺑﺎء ﻭﺗﺸﻐﻴﻠﻬﺎ‪.‬‬ ‫‪ .2‬ﺗﺤﺪﻳﺪ ﻭﺿﻊ ﺍﻝ‪ AV‬ﻋﻠﻰ ﺟﻬﺎﺯ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ‪.‬‬ ‫‪ .3‬ﻳﺘﻢ ﺗﺴﻠﻴﻢ ﺍﻟﺮﻳﺴﻴﻔﺮ ﻣﻊ ﻗﻨﻮﺍﺕ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ﺍﻟﻤﺒﺮﻣﺠﺔ ﻣﺴﺒﻘﺎ ﻭﻳﻤﻜﻦ ﺍﺳﺘﺨﺪﺍﻣﻬﺎ ﻋﻠﻰ ﺍﻟﻔﻮﺭ‪ .‬ﻟﻤﻌﺮﻓﺔ‬ ‫ﻣﺎ ﺇﺫﺍ ﻛﺎﻥ ﻫﻨﺎﻙ ﻗﻨﻮﺍﺕ ﺟﺪﻳﺪﺓ ‪ ،‬ﻳﺠﺐ ﺗﻨﺸﻴﻂ ﺍﻟﺒﺤﺚ ﻋﻦ ﺍﻟﻘﻨﺎﺓ‪.‬‬ ‫ﻣﻌﻠﻮﻣﺎﺕ ﺍﻟﻘﺎﺋﻤﺔ‪:‬‬ ‫ﺍﻟﻤﺴﺘﺨﺪﻡ ﻟﺪﻳﻪ ﻋﺪﺓ ﻃﺮﻕ ﻟﻠﺘﻨﻘﻞ ﻋﺒﺮ ﺍﻟﻘﻮﺍﺋﻢ ﻭﺍﻟﻮﻇﺎﺋﻒ ﻋﻦ ﻃﺮﻳﻖ ﺑﻌﺾ ﺍﻟﻤﻔﺎﺗﻴﺢ ﻓﻲ ﻭﺣﺪﺓ ﺍﻟﺘﺤﻜﻢ‬ ‫ﻋﻦ ﺑﻌﺪ ﺗﺘﻴﺢ ﺇﻣﻜﺎﻧﻴﺔ ﺍﻟﻮﺻﻮﻝ ﺍﻟﻤﺒﺎﺷﺮ ﺇﻟﻰ ﺍﻝﻭﻇﺎﺋﻒ ‪.‬ﺛﻢ ﻳﺘﻢ ﺍﻟﺘﻌﺮﻑ ﻋﻠﻰ ﺃﻫﻢ‬ ‫ﺗﺎﺡ ﻣﻮﺍﻓﻖ ‪ .‬ﻭﻣﻔﺎﺗﻴﺢ ﺃﺧﺮﻯ ﻣﺘﻌﺪﺩﺓ ﺍﻟﻮﻇﺎﺋﻒ ﻣﻤﺎ ﻳﻌﻨﻲ‬ ‫ﻣﻔﺎﺗﻴﺢ ﺍﻟﻘﺎﺋﻤﺔ‪،‬ﺍﻟﻤﻔﺎﺗﻴﺢ ﺍﻝﻣﻠﻮﻧﺔ ﻭﻣﻒ‬ ‫ﺃﻥ ﺍﻟﺘﻐﻴﻴﺮﺍﺕ ﻭﻇﻴﻔﺘﻬﺎ ﺗﻌﺘﻤﺪ ﻋﻠﻰ ﺍﻟﻮﺿﻊ ﺍﻟﺬﻱ ﺍﻧﺖ ﻓﻴﻪ‪.‬‬ ‫‪ -1‬ﺍﺳﺘﺨﺪﻡ ﻣﻔﺎﺗﻴﺢ ▼ ‪ ▲ /‬ﻟﺘﺤﺮﻳﻚ ﺍﻟﻤﺆﺷﺮ ﺇﻟﻰ ﺃﻋﻠﻰ ﺃﻭ ﺇﻟﻰ ﺃﺳﻔﻞ ﻭﻣﻦ ﺃﻭﻝ ﺳﻄﺮ ﺍﻟﻰ‬ ‫ﺁﺧﺮ ﺳﻄﺮ‪.‬‬ ‫‪ -2‬ﺍﺳﺘﺨﺪﻡ ﻣﻔﺎﺗﻴﺢ ► ‪ ◄ /‬ﻟﺘﺤﺮﻳﻚ ﺍﻟﻤﺆﺷﺮ ﺇﻟﻰ ﺍﻟﻴﺴﺎﺭ ﺃﻭ ﺍﻟﻴﻤﻴﻦ ﻣﻦ ﺃﻭﻝ ﺳﻄﺮ ﺍﻟﻰ ﺁﺧﺮ ﺳﻄﺮ‪.‬‬ ‫‪ -3‬ﺍﺳﺘﺨﺪﺍﻡ ﻣﻔﺘﺎﺡ ﺧﺮﻭﺝ ﻟﻤﻐﺎﺩﺭﺓ ﺍﻟﻘﺎﺋﻤﺔ ﻭﺍﻟﻌﻮﺩﺓ ﺇﻟﻰ ﻭﺿﻊ ﺍﻟﻌﺮﺽ‪.‬‬ ‫‪ -4‬ﻓﻲ ﺍﻝﻗﺎﺋﻤﺔﺍﻝﻓﺮﻋﻴﺔ‪ :‬ﺍﺳﺘﺨﺪﻡ ﻣﻔﺎﺗﻴﺢ ► ‪ ◄ /‬ﻻﺧﺘﻴﺎﺭ ﻭﺍﺣﺪ ﻣﻦ ﺍﻟﺨﻴﺎﺭﺍﺕ ﺍﻝﻣﺒﺮﻣﺞﺓ ﻣﺴﺒﻘﺎ ﻓﻲ‬ ‫ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﻔﺮﻋﻴﺔ‪ .‬ﺍﺳﺘﺨﺪﺍﻡ ﺍﻟﻤﻔﺘﺎﺡ ﻣﻮﺍﻓﻖ ﻟﺘﺄﻛﻴﺪ ﺍﻟﺘﺤﺪﻳﺪ ‪.‬ﻭ ﺍﻟﻤﺆﺷﺮ ﺍﻷﺻﻔﺮ ﻳﺪﻝ ﻋﻠﻰ ﺍﻟﺘﺤﺪﻳﺪ ﺍﻟﻨﺸﻂ‪.‬‬

‫ﺃﺳﺌﻠﺔ ﻭﺃﺟﻮﺑﺔ‪:‬‬ ‫ﺳﺆﺍﻝ‪ :‬ﻟﻘﺪ ﺗﺤﻮﻟﺖ ﺣﺎﻟﺔ ﺍﻟﺘﺸﻐﻴﻞ ﻣﻦ ﻭﺿﻊ ﺍﻻﺳﺘﻌﺪﺍﺩ ﻋﻠﻰ ﺍﻟﺮﻳﺴﻴﻔﺮ ﺍﻟﻰ ﺣﺎﻟﺔ ﺍﻟﺘﺸﻐﻴﻞ‪ ،‬ﻭﻟﻜﻦ ﻟﻢ‬ ‫ﻳﻈﻬﺮ ﺃﻱ ﺷﻲءﻋﻠﻰ ﺷﺎﺷﺔ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ؟‬

‫ﺍﻟﺠﻮﺍﺏ‪:‬‬

‫ﺗﺄﻛﺪ ﻣﻦ ﺗﻢ ﺗﻌﻴﻴﻦ ﺟﻬﺎﺯ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ﻹﺩﺧﺎﻝ ﺍﻟﻔﻴﺪﻳﻮ ﺍﻟﺼﺤﻴﺢ ﻭﻟﻴﺲ ﺗﻌﻴﻴﻦ ﻗﻨﻮﺍﺕ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ‪).‬ﻋﻠﻰ‬ ‫ﺳﺒﻴﻞ ﺍﻟﻤﺜﺎﻝ( ‪ ،‬ﺇﺫﺍ ﻛﺎﻥ ﻟﺪﻳﻚ ﺍﺗﺼﺎﻝ ﻣﻊ ﻭﺣﺪﺓ ﺍﻹﺩﺧﺎﻝ ﻓﻴﺪﻳﻮ ‪ 1‬ﻣﻦ ﺟﻬﺎﺯ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ﻳﺠﺐ ﺃﻥ ﻳﺘﻢ‬ ‫ﺗﺤﻮﻳﻠﻬﺎ ﺍﻟﻰ ﻓﻴﺪﻳﻮ ‪.1‬‬ ‫ﺳﺆﺍﻝ‪ :‬ﻟﻘﺪ ﺗﺤﻮﻟﺖ ﺣﺎﻟﺔ ﺍﻟﺘﺸﻐﻴﻞ ﻣﻦ ﻭﺿﻊ ﺍﻻﺳﺘﻌﺪﺍﺩ ﻋﻠﻰ ﺍﻟﺮﻳﺴﻴﻔﺮ ﺍﻟﻰ ﺣﺎﻟﺔ ﺍﻟﺘﺸﻐﻴﻞ‪ ،‬ﻭﻟﻜﻦ ﻟﻢ‬ ‫ﻳﻈﻬﺮ ﺃﻱ ﺷﻲءﻋﻠﻰ ﺷﺎﺷﺔ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ﺳﻮﻯ ﺭﺳﺎﻟﺔ ﻻﻳﻮﺟﺪ ﺍﺷﺎﺭﺓ ؟‬

‫ﺍﻟﺠﻮﺍﺏ‪:‬‬

‫ﻫﺬﺍ ﻳﻌﻨﻲ ﺃﻥ ﻟﺪﻳﻚ ﺍﺧﺘﻴﺎﺭ ﺍﻟﻘﻨﺎﺓ ﻭﻋﺪﻡ ﻭﺟﻮﺩ ﺇﺷﺎﺭﺓ‪ ،‬ﻳﻤﻜﻦ ﺃﻥ ﺗﻜﻮﻥ ﻫﻨﺎﻙ ﻋﺪﺓ ﺃﺳﺒﺎﺏ‪:‬‬ ‫‪ -1‬ﺍﻟﻘﻨﺎﺓ ﺍﻟﺘﻲ ﺗﺨﺘﺎﺭﻫﺎ ﻫﻲ ﻟﻴﺲ ﻓﻲ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ ﺍﻟﺨﺎﺹ ‪ .‬ﺍﻟﺤﻞ ﻫﻮ ﺗﻐﻴﻴﺮ ﺍﻟﻘﻨﺎﺓ‪.‬‬ ‫‪ -2‬ﺇﺷﺎﺭﺓ ﺍ ﻟﻘﻨﺎﺓ ﺍﻟﺘﻠﻔﺰﻳﻮﻧﻴﺔ ﺍﻟﺤﺎﻟﻴﺔ ﺿﻌﻴﻔﺔ ﺟﺪﺍ ‪ .‬ﻳﺮﺟﻰ ﻣﺤﺎﻭﻟﺔ ﺍﻟﺘﺒﺪﻳﻞ ﺇﻟﻰ ﺇﺷﺎﺭﺓ ﻗﻨﻮﺍﺕ ﺃﺧﺮﻯ‬

‫‪8‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﺟﻬﺎﺯ ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ‪:‬‬ ‫ﺍﻟﺮﺟﺎء ﺇﺯﺍﻟﺔ ﻏﻄﺎء ﺍﻟﺒﻄﺎﺭﻳﺔ ﻭﺗﺤﻤﻴﻞ ‪ two AAA (UM - 4‬ﺃﻭ )‪ R03‬ﺍﻟﺒﻄﺎﺭﻳﺎﺕ ‪.‬ﺗﺄﻛﺪ ﻣﻦ‬ ‫ﺃﻧﻪ ﻗﺪ ﺗﻢ ﺇﺩﺭﺍﺝ ﺑﻄﺎﺭﻳﺎﺕ ﺑﺸﻜﻞ ﺻﺤﻴﺢ ﻣﻄﺎﺑﻘﺔ ﻟﺮﻣﻮﺯ ‪ - ، +‬ﺍﻟﻤﻮﺟﻮﺩﺓ ﻣﻜﺎﻥ‬ ‫ﻭﺿﻊ ﺍﻟﺒﻄﺎﺭﻳﺔ ‪.‬ﺃﻏﻠﻖ ﻏﻄﺎء ﺍﻟﺒﻄﺎﺭﻳﺔ‪.‬ﺍﻥ ﺍﺳﺘﺒﺪﺍﻝ ﺍﻟﺒﻄﺎﺭﻳﺎﺕ ﺿﺮﻭﺭﻱ‪ .‬ﻻ‬ ‫ﺗﺨﻠﻂ ﺍﻟﺒﻄﺎﺭﻳﺎﺕ ﺍﻟﺠﺪﻳﺪﺓ ﻭﺍﻟﻤﺴﺘﻌﻤﻠﺔ ﻭﻏﻴﺮ ﺫﻟﻚ ﻻﻥ ﻋﻤﺮ ﺍﻟﺒﻄﺎﺭﻳﺔ ﺱﻱﻛﻮﻥ ﺃﻗﺼﺮ ﺑﻜﺜﻴﺮ ﻣﻦ‬ ‫ﺍﻟﻤﻌﺘﺎﺩ ‪.‬ﻳﺠﺐ ﺇﺯﺍﻟﺔ ﺍﻟﺒﻄﺎﺭﻳﺎﺕ ﺇﺫﺍ ﻝﻡ ﻳﺘﻢ ﺍﺳﺘﺨﺪﺍﻡ ﻫﺬﻩ ﺍﻟﻮﺣﺪﺓ ﻟﻔﺘﺮﺓ ﻃﻮﻳﻠﺔ ﻣﻦ ﺍﻟﺰﻣﻦ‪.‬‬ ‫ﺻﺪﻳﻖ ﻟﻠﺒﻴﺌﺔ ‪ :‬ﻻ ﺗﺘﺨﻠﺺ ﻣﻦ ﺍﻟﺒﻄﺎﺭﻳﺎﺕ ﻓﻲ ﺍﻟﻘﻤﺎﻣﺔ ﺍﻟﻌﺎﺩﻳﺔ‪.‬‬ ‫ﺍً‬ ‫ﻛﻦ‬ ‫‪:‬ﺍﺿﻐﻂ ﻟﻠﺘﺒﺪﻳﻞ ﺑﻴﻦ ﺣﺎﻻﺕ ﺍﻻﻳﻘﺎﻑ ﻭﺍﻟﺘﺸﻐﻴﻞ‪.‬‬ ‫‪:‬ﺍﺿﻐﻂ ﻟﻜﺘﻢ ﺍﻟﺼﻮﺕ ﻣﺆﻗﺘﺎً‪.‬‬ ‫‪ :ADD‬ﻳﺴﺘﺨﺪﻡ ﻟﻠﺒﺤﺚ ﻋﻦ ﻗﻨﺎﺓ ﻣﺤﺪﺩﺓ ﺑﻮﺍﺳﻄﺔ ﺍﻟﺤﺮﻭﻑ‪.‬‬ ‫‪ : 0-9‬ﻳﺴﺘﺨﺪﻡ ﻻﺩﺧﺎﻝ ﺍﻟﻘﻴﻢ ﻓﻲ ﻣﺮﺑﻌﺎﺕ ﺍﻟﺤﻮﺍﺭ ﺍﻭ ﻟﻠﺬﻫﺎﺏ ﻟﻘﻨﺎﺓ ﻣﻌﻴﻨﺔ‬ ‫ﻣﺒﺎﺷﺮﺓً‪.‬‬ ‫‪:PAUSE‬ﺍﺿﻐﻂ ﻟﻠﺘﺒﺪﻳﻞ ﺑﻴﻦ ﺍﻻﻳﻘﺎﻑ ﺍﻟﻤﺆﻗﺖ ﺃﻭ ﺍﻟﺘﺸﻐﻴﻞ‪.‬‬ ‫‪: RECALL‬ﻟﻠﻌﻮﺩﺓ ﻟﻠﻘﺎﺋﻤﺔ ﺍﻟﺴﺎﺑﻘﺔ ﺃﻭ ﺍﻟﻘﻨﺎﺓ ﺍﻟﺴﺎﺑﻘﺔ‪.‬‬ ‫‪: TV/RADIO‬ﺍﺿﻐﻂ ﻟﻼﺧﺘﻴﺎﺭ ﺑﻴﻦ ﺣﺎﻻﺕ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ ﻭﺍﻟﺮﺍﺩﻳﻮ‪.‬‬ ‫‪ :INFO‬ﻟﻌﺮﺽ ﻣﻌﻠﻮﻣﺎﺕ ﻋﻦ ﺍﻟﻘﻨﺎﺓ ﺍﻟﺤﺎﻟﻴﺔ‪.‬‬ ‫‪:AUDIO‬ﺍﺿﻐﻂ ﻻﺳﺘﻌﺮﺍﺽ ﺍﻋﺪﺍﺩﺍﺕ ﺍﻟﺼﻮﺕ‪.‬‬ ‫‪ :9PIC‬ﺍﺿﻐﻂ ﻻﺧﺘﻴﺎﺭ ﺻﻮﺭ ﻣﺘﻌﺪﺩﺓ‪.‬‬ ‫‪ : /‬ﺍﺿﻐﻂ ﻟﺘﻐﻴﻴﺮ ﺍﻟﻘﻨﻮﺍﺕ ‪ ,‬ﺍﻭ ﻟﻠﺘﺤﺮﻙ ﺃﻋﻠﻰ ﺃﻭ ﺃﺳﻔﻞ ﻓﻲ ﺍﻟﻘﺎﺋﻤﺔ‪.‬‬ ‫▼‪ :▲/‬ﺍﺿﻐﻂ ﻟﺘﻐﻴﻴﺮ ﺍﻟﻘﻨﻮﺍﺕ ‪ ,‬ﺍﻭ ﻟﻠﺘﺤﺮﻙ ﺃﻋﻠﻰ ﺃﻭ ﺃﺳﻔﻞ ﻓﻲ ﺍﻟﻘﺎﺋﻤﺔ‪.‬‬ ‫►‪:◄/‬ﺍﺿﻐﻂ ﻟﻀﺒﻂ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ‪,‬ﺍﻭ ﻟﻠﺘﺤﺮﻙ ﻣﻦ ﺍﻟﻴﻤﻴﻦ ﻭﺍﻟﻴﺴﺎﺭ ﻓﻲ‬ ‫ﺍﻟﻘﺎﺋﻤﺔ‪.‬‬ ‫‪ :OK‬ﻟﻀﻐﻂ ﻣﻮﺍﻓﻖ ﻋﻠﻰ ﺍﻟﻌﻨﺎﺻﺮ ﺍﻟﻤﺤﺪﺩﺓ ﺑﺎﻟﻠﻮﻥ‪.‬‬ ‫‪:MENU‬ﺍﺿﻐﻂ ﻻﺳﺘﻌﺮﺍﺽ ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﺮﺋﻴﺴﻴﺔ ﻋﻠﻰ ﺍﻟﺸﺎﺷﺔ‪.‬‬ ‫‪ : LIST‬ﺍﺳﺘﺨﺪﻡ ﻟﻌﺮﺽ ﻻﺋﺤﺔ ﺍﻟﻘﻨﻮﺍﺕ‪.‬‬ ‫‪ : EXIT‬ﻟﻠﺨﺮﻭﺝ ﻣﻦ ﺍﻟﻘﺎﺋﻤﺔ ﺃﻭ ﺍﻟﻘﺎﺋﻤﺔ ﺍﻟﻔﺮﻋﻴﺔ‪,‬ﻭﺍﻟﻐﺎء ﺍﻟﻌﻤﻠﻴﺎﺕ ﻗﻴﺪ ﺍﻟﻤﻌﺎﻟﺠﺔ ﺍﺫﺍ ﻭﺟﺪﺕ‪.‬‬

‫‪7‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫‪ -1‬ﻣﻌﺪﺍﺕ ﺍﺗﺼﺎﻝ ﺭﻗﻤﻲ ‪ LNB IN‬ﻣﻨﻔﺬ ﻫﻮﺍﺋﻲ ﺍﻷﻗﻤﺎﺭ ﺍﻟﺼﻨﺎﻋﻴﺔ‪.‬‬ ‫‪ -2‬ﻣﻨﻔﺬ ‪ : RS232‬ﻟﺘﺮﻗﻴﺔ ﺍﻟﺒﺮﺍﻣﺞ‪.‬‬ ‫‪ -3‬ﻛﻬﺮﺑﺎﺋﻴﺔ ﻭﻓﻮﻟﻄﻴﺔ ﺍﻻﺩﺧﺎﻝ ‪12V/1A‬‬ ‫‪ -4‬ﺗﻮﺻﻴﻞ ﻛﺎﺑﻞ ﺍﻻﺳﺘﺸﻌﺎﺭ ﻋﻦ ﺑﻌﺪ‪. IR‬‬ ‫‪ -5‬ﻛﺎﺑﻞ ﺗﻠﻔﺰﻳﻮﻥ ‪ SCART‬ﺍﻟﻔﻴﺪﻳﻮ ﻭﺍﻟﺼﻮﺕ ﻣﻨﻔﺬ ﺍﺗﺼﺎﻝ ﻟﻠﺘﻠﻔﺰﻳﻮﻥ ﺃﻭ ﺍﻟﻤﻌﺪﺍﺕ ﺍﻷﺧﺮﻯ‪.‬‬ ‫‪-6‬ﻛﺎﺑﻞ ﺇﺧﺮﺍﺝ‪ : AV‬ﺍﻟﻔﻴﺪﻳﻮ ﻭﺍﻟﺼﻮﺕ ﻣﻨﻔﺬ ﺍﺗﺼﺎﻝ ﻟﻠﺘﻠﻔﺰﻳﻮﻥ ﺃﻭ ﺍﻟﻤﻌﺪﺍﺕ ﺍﻷﺧﺮﻯ‪.‬‬

‫‪6‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﺍﻻﻛﺴﺴﻮﺍﺭﺍﺕ‬ ‫ﻳﺮﺟﻰ ﻓﻚ ﻋﻠﺒﺔ ﺍﻟﺮﻳﺴﻴﻔﺮ ﻭﺍﻟﺘﺤﻘﻖ ﻟﻠﺘﺄﻛﺪ ﻣﻦ ﺃﻥ ﻳﺘﻢ ﺗﻀﻤﻴﻦ ﻛﻞ ﻣﻦ ﺍﻟﻌﻨﺎﺻﺮ ﺍﻟﺘﺎﻟﻴﺔ ﻓﻲ ﺍﻟﻌﻠﺒﺔ‪:‬‬ ‫ﻋﺪﺩ ‪ 1‬ﺟﻬﺎﺯ ﺗﺤﻜﻢ ﻋﻦ ﺑﻌﺪ‪.‬‬ ‫ﻋﺪﺩ ‪ 1‬ﻛﺒﻞ ‪ AV‬ﻟﻼﺗﺼﺎﻝ‪.‬‬ ‫ﻋﺪﺩ‪ 2‬ﺑﻄﺎﺭﻳﺎﺕ ﻣﻦ ﻧﻮﻉ)‪.( AAA‬‬ ‫ﻋﺪﺩ ‪ 1‬ﻛﺎﺑﻞ ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ‪.‬‬ ‫ﻋﺪﺩ ‪ 1‬ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ ﺍﻟﻤﺨﺘﺼﺮ‪.‬‬

‫ﺍﻟﻠﻮﺣﺔ‪:‬‬

‫‪5‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﺍﻟﺘﺨﺰﻳﻦ ‪:‬‬ ‫ﻳﺘﻢ ﺗﺨﺰﻳﻦ ﺟﻬﺎﺯ ﺍﻻﺳﺘﻘﺒﺎﻝ ﺍﻟﺨﺎﺹ ﺑﻚ ﻭﻣﻠﺤﻘﺎﺗﻪ ﻭﺗﺴﻠﻤﻬﺎ ﻓﻲ ﻋﺒﻮﺓ ﺻﻨﻌﺖ ﺧﺼﻴﺼﺎً‬ ‫ﻝﻝﺣﻤﺎﻳﺔ ﺿﺪ ﺍﻟﺼﺪﻣﺎﺕ ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ ﻭﺍﻟﺮﻃﻮﺑﺔ‪ ,‬ﻋﻨﺪ ﺗﻔﺮﻳﻎ ﺍﻟﻘﻄﻌﺔ ﻣﻦ ﺍﻟﻌﻠﺒﺔ ‪ ،‬ﺗﺄﻛﺪ ﻣﻦ ﺃﻥ‬ ‫ﻳﺘﻢ ﺇﺩﺭﺍﺝ ﺟﻤﻴﻊ ﺍﻷﺟﺰﺍء ﻭﺍﻟﺤﻔﺎﻅ ﻋﻠﻰ ﺍﻟﻌﻠﺒﺔ ﺑﻌﻴﺪﺍ ﻋﻦ ﻣﺘﻨﺎﻭﻝ ﺍﻷﻃﻔﺎﻝ ‪.‬ﻟﻨﻘﻞ ﺍﻟﻤﺘﻠﻘﻲ ﻣﻦ‬ ‫ﻣﻜﺎﻥ ﺇﻟﻰ ﺁﺧﺮ ﻣﺴﺘﻘﺒﻼً ‪ ،‬ﺃﻭ ﻻﻋﺎﺩﺗﻪ ﺗﺤﺖ ﺷﺮﻭﻁ ﺍﻟﻀﻤﺎﻥ‪ ،‬ﺗﺄﻛﺪ ﻣﻦ ﺍﻋﺎﺩﺓ ﻭﺿﻊ ﺍﻟﺮﻳﺴﻴﻔﺮ ﻓﻲ‬ ‫ﻋﺒﻮﺗﻪ ﺍﻷﺻﻠﻴﺔ ﻣﻊ ﻣﻠﺤﻘﺎﺗﻪ‪,‬ﻭﺍﻻﻧﺘﺒﺎﻩ ﻟﻮﺟﻮﺩ ﺍﻟﻀﻤﺎﻥ ﺍﻟﺨﺎﺹ ﺑﻚ‪.‬‬

‫ﻣﻌﻠﻮﻣﺎﺕ ﻋﺎﻣﺔ‪:‬‬ ‫ﻭﻳﺘﻀﻤﻦ ﻓﻚ ﻗﻮﻱ ﻝﺷﺮﻳﺤﺔ ﻭﺍﺣﺪﺓ ‪ ،‬ﻭﻫﻮ ﻣﺼﻤﻢ ‪-SBR101N‬ﻟﺘﻘﺪﻳﻢ‪ FTA‬ﺣﺮﺓ ﻣﻊ ﺍﻟﻬﻮﺍء‬ ‫ﺑﺲ ﻭﻟﺔ( ﻭﻳﺘﻢ ﺍﻝﻋﺮﺽ ﻋﻠﻰ ﺍﻟﺸﺎﺷﺔ ‪ ،‬ﻭ ﻳﻮﺿﺢ ﺃﺩﺍء ﻋﺎﻟﻲ ﻟﻠﻐﺎﻳﺔ‬ ‫ﺍﻟﻄﻠﻖ )ﻣﻊ ‪ OSD‬ﻳﺖﻏﻴﻴﺮ ﻩ‬ ‫ﻭﻓﻌﺎﻟﻴﺔ ﺍﻟﺘﻜﻠﻔﺔ‪ ،‬ﻣﻤﺎ ﻳﺠﻌﻞﻫﺎ ﺍﻓﻀﻞ ﺧﻴﺎﺭ ﻟﻜﻢ ﻝﻟﺘﻤﺘﻊ ﺑﺎﻟﺘﻜﻨﻮﻟﻮﺟﻴﺎ ﺍﻟﺮﻗﻤﻴﺔ ﺍﻟﻤﻠﻮﻧﺔ ‪.‬‬

‫ﺍﻟﻤﻤﻴﺰﺍﺕ ﺍﻟﺮﺋﻴﺴﻴﺔ‪:‬‬ ‫ﻋﻠﺒﺔ ﺻﻐﻴﺮﺓ ﺍﻟﺤﺠﻢ ﻣﻊ ﻛﺎﺑﻞ ‪) AV‬ﺍﻟﻔﻴﺪﻳﻮ ﻭﺍﻟﺼﻮﺕ(‬ ‫ﻣﺘﻮﺍﻓﻖ ﺗﻤﺎﻣﺎ ﻣﻊ ‪ C / DVB – S‬ﻛﻴﻮ ﺑﺎﻧﺪ‪.‬‬ ‫ﻣﺴﺢ ﻳﺪﻭﻱ‬ ‫ﻣﺴﺘﺨﺪﻡ ﻗﺎﺋﻤﺔ ‪ OSD‬ﺍﻟﻮﺩﻳﺔ ﻣﻊ ﻭﻇﻴﻔﺔ ﻛﺎﻣﻠﺔ‬ ‫ﺩﻟﻴﻞ ﺇﻋﺪﺍﺩ ﺍﻟﺘﺜﺒﻴﺖ ﺳﻬﻠﺔ‬ ‫‪ 2500‬ﺍﻟﻘﻨﻮﺍﺕ ﺍﻟﺘﻠﻔﺰﻳﻮﻧﻴﺔ‬ ‫ﺻﻮﺭ ﻣﺘﻌﺪﺩﺓ ﺗﺼﻞ ﺇﻟﻰ ‪9‬‬ ‫ﺗﻌﺪﺩ ﺍﻟﻠﻐﺎﺕ‬ ‫ﺕﺩﻋﻢ ﺩﺍﻳﺴﻚ ‪ 1.0/1.2‬ﻭﺍﻟﻨﻐﻤﺔ‪22KHz‬‬ ‫‪256‬ﻟﻮﻥ ﺗﺒﺪﻳﻞ ‪.‬‬ ‫ﺑﺤﺚ ﺍﻝﻗﻨﺎﺓ ﺍﻟﺘﻠﻘﺎﺋﻲ ‪NIT، PID،‬‬ ‫ﻣﻨﻔﺬ ‪ RS232‬ﻟﺘﺮﻗﻴﺔﺍﻝﺑﺮﻣﺠﻴﺎﺕ‬

‫‪4‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺴﻼﻣﺔ‪:‬‬ ‫ﺍﻟﺮﺟﺎء ﻗﺮﺍءﺓ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﺍﻟﺴﻼﻣﺔ ﻫﺬﻩ ﺑﻌﻨﺎﻳﺔ ‪ ،‬ﻗﺒﻞ ﺗﺸﻐﻴﻞ ﺟﻬﺎﺯ ﺍﻻﺳﺘﻘﺒﺎﻝ ‪.‬ﻳﺮﺟﻰ ﻣﻼﺣﻈﺔ ﺟﻤﻴﻊ‬ ‫ﺍﻟﺘﺤﺬﻳﺮﺍﺕ ﻭﺍﻹﺭﺷﺎﺩﺍﺕ ﺍﻟﻤﻮﺟﻮﺩﺓ ﻋﻠﻰ ﺍﻟﻤﻌﺪﺍﺕ ﻭﺍﻟﻮﺍﺭﺩﺓ ﻓﻲ ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺘﺸﻐﻴﻞ ﻫﺬﻩ‪:‬‬ ‫‪ -1‬ﺗﺄﻛﺪ ﻣﻦ ﻗﺮﺍءﺓ ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ ﻫﺬﺍ ﻗﺒﻞ ﺑﺪء ﺗﺸﻐﻴﻞ ﺍﻟﻜﻤﺒﻴﻮﺗﺮ ‪.‬‬ ‫‪ -2‬ﻳﺠﺐ ﺗﺜﺒﻴﺖ ﺍﻟﻄﺒﻖ ﻣﻊ ﺍﻻﺗﺠﺎﻩ ﺍﻟﺼﺤﻴﺢ ﻭﺍﻟﺰﺍﻭﻳﺔ ‪.‬ﺇﺫﺍ ﻛﺎﻥ ﻫﻮﺍﺋﻲ ﺍﻻﺳﺘﻘﺒﺎﻝ ﻻ ﻳﻌﻤﻞ ﺑﻬﺬﻩ‬ ‫ﺍﻟﺨﺎﺻﻴﺔ ‪ ،‬ﺍﺗﺼﻞ ﺑﺎﻟﻮﻛﻴﻞ ﺍﻟﻤﺤﻠﻲ ‪.‬‬ ‫‪ -3‬ﻋﺪﻡ ﻓﺘﺢ ﺍﻟﻐﻄﺎء ‪.‬ﻻﺗﻞﻣﺲ ﺩﺍﺧﻞ ﺍﻟﻮﺣﺪﺓ ﻣﻤﺎ ﻗﺪ ﻱﺳﺒﺐ ﺍﻟﺼﺪﻣﺔ ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ ‪.‬‬ ‫‪ -4‬ﺗﺜﺒﻴﺖ ﺍﻝﻭﺣﺪﺓ ﺃﻓﻘﻴﺎ ‪ :‬ﺍﻝﺗﺮﻛﻴﺐ ﻏﻴﺮ ﺍﻟﻤﺘﻮﺍﺯﻥ ﻗﺪ ﻱﺗﺴﺒﺐ ﻓﻲ ﺗﻠﻒ ﺍﻝﻭﺣﺪﺓ ﻓﻲ ﺣﺪ ﺫﺍﺗﻪﺍ ‪.‬‬ ‫‪-5‬ﻋﻨﺪﻣﺎ ﻻ ﺗﺴﺘﺨﺪﻡ ﻫﺬﻩ ﺍﻟﻮﺣﺪﺓ ﻟﻔﺘﺮﺓ ﻃﻮﻳﻠﺔ ‪.‬ﺍﻟﺮﺟﺎء ﺳﺤﺐ ﺳﻠﻚ ﺍﻟﻄﺎﻗﺔ ﻣﻦ ﺍﻝﻣﺄﺧﺬ‬ ‫ﺍﻟﻜﻬﺮﺑﺎﺋﻲ ‪.‬ﻛﻤﺎ ﻻ ﺗﺴﺘﺨﺪﻡ ﺳﻠﻚ ﺍﻟﻜﻬﺮﺑﺎء ﺍﻟﺘﺎﻟﻒ ‪.‬‬ ‫‪-6‬ﻋﻨﺪﻣﺎ ﺗﻨﺘﻘﻞ ﺍﻟﻮﺣﺪﺓ ﻓﺠﺄﺓ ﻣﻦ ﺍﻟﻤﻨﻄﻘﺔ ﺍﻟﺴﺎﺧﻨﺔ ﺍﻟﻰ ﻣﻨﻄﻘﺔ ﺑﺎﺭﺩﺓ ‪ ،‬ﻓﺈﻧﻪ ﻗﺪ ﻳﺴﺒﺐ ﻣﺸﺎﻛﻞ ﻓﻲ ﻫﺬﻩ‬ ‫ﺍﻟﺤﺎﻟﺔ ‪ ،‬ﻳﺮﺟﻰ ﺇﻳﻘﺎﻑ ﺍﻟﻄﺎﻗﺔ ‪ ،‬ﺗﺸﻐﻴﻞ ﺍﻟﺠﻬﺎﺯ ﺑﻌﺪ ‪ 2-1‬ﺳﺎﻉﺓ ‪.‬‬ ‫‪-7‬ﻻ ﺗﻠﻤﺲ ﺍﻟﺠﻬﺎﺯ ﺑﻴﺪ ﺭﻃﺒﺔ ‪ .‬ﻭﺍﻻﻧﺘﺒﺎﻩ ﺇﺫﺍ ﻛﺎﻥ ﻫﻨﺎﻙ ﺳﻮﺍﺋﻞ ﻳﺠﺐ ﻋﺪﻡ ﺍﺩﺧﺎﻟﻬﺎ ﻓﻲ ﺍﻟﻮﺣﺪﺓ ‪ ،‬ﺍﺫﺍ‬ ‫ﺗﻢ ﺫﻟﻚ ﻳﺮﺟﻰ ﺳﺤﺐ ﺳﻠﻚ ﺍﻟﻜﻬﺮﺑﺎء ﻋﻠﻰ ﺍﻟﻔﻮﺭﻻﻧﻪ ﻗﺪ ﻱﺳﺒﺐ ﺣﺮﻳﻖ ﺃﻭ ﺻﺪﻣﺔ ﻛﻬﺮﺑﺎﺋﻴﺔ ‪.‬‬ ‫‪ -8‬ﻳﺠﺐ ﺗﺮﻛﻴﺐ ﺍﻟﻮﺣﺪﺓ ﻓﻲ ﻣﻜﺎﻥ ﺗﻬﻮﻳﺔ ﺟﻴﺪﺓ ﻣﻊ ﺩﺭﺟﺔ ﺣﺮﺍﺭﺓ ﻣﻨﺎﺳﺒﺔ ﻓﻲ ﻣﻜﺎﻥ ﺑﻌﻴﺪ ﻋﻦ ﺃﺷﻌﺔ‬ ‫ﺍﻟﺸﻤﺲ ﺍﻟﻤﺒﺎﺷﺮﺓ ﻭﻣﻨﺨﻔﺾ ﺍﻟﺮﻃﻮﺑﺔ ﻭﻣﻨﺨﻔﺾ ﺍﻻﻫﺘﺰﺍﺯ ‪.‬‬ ‫‪ -9‬ﻳﺠﺐ ﻭﺿﻊ ﺍﻟﻮﺣﺪﺓ ﻓﻲ ﻣﻜﺎﻥ ﺟﻴﺪ ﺍﻟﺘﻬﻮﻳﺔ ﻭﺑﻴﺌﺔ ﺫﺍﺕ ﺣﺮﺍﺭﺓ ﻣﻨﺎﺳﺒﺔ ‪.‬‬ ‫‪-10‬ﻻ ﺗﻀﻊ ﺃﺷﻴﺎء ﺛﻘﻴﻠﺔ ﻋﻠﻰ ﺍﻟﻮﺣﺪﺓ ‪.‬‬ ‫ﺇﺫﺍ ﻛﺎﻥ ﺍﻟﺮﻳﺴﻴﻔﺮ ﻻ ﻱﻋﻤﻞ ﺑﺸﻜﻞ ﻃﺒﻴﻌﻲ ﺣﺘﻰ ﺑﻌﺪ ﺍﺗﺒﺎﻉ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﺑﺪﻗﺔ ﻓﻲ ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ ﻫﺬﺍ ‪،‬‬ ‫ﻓﻤﻦ ﺍﻟﻤﺴﺘﺤﺴﻦ ﺃﻥ ﺗﺘﺼﻞ ﺏﺍﻟﺪﻋﻢ ﺍﻟﻤﻄﻠﻮﺏ ﻝﻟﺨﺪﻣﺔ ‪.‬‬

‫‪3‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ ﺍﻻﺩﻭﺍﺕ‪.‬‬‫ﻣﻌﻠﻮﻣﺎﺕ‪.‬‬‫ ﻣﺮﺷﺪ ﺍﻟﻘﻤﺮ ﺍﻟﺼﻨﺎﻋﻲ‪.‬‬‫ ﺍﻟﻘﻴﻤﺔ ﺍﻻﻓﺘﺮﺍﺿﻴﺔ‪.‬‬‫ ﺗﺤﺪﻳﺚ ﺍﻟﺒﺮﻣﺠﻴﺎﺕ‪.‬‬‫‪-6‬ﺍﻟﻤﻮﺍﺻﻔﺎﺕ ﺍﻟﻔﻨﻴﺔ‪.‬‬ ‫‪-7‬ﺍﻟﻤﺸﺎﻛﻞ ﺍﻟﻔﻨﻴﺔ‪.‬‬

‫‪2‬‬


‫ﺩﻟﻴﻞ ﺍﻟﻤﺴﺘﺨﺪﻡ‬

‫‪GENX GXR1600‬‬

‫ﺟﺪﻭﻝ ﺍﻟﻤﺤﺘﻮﻳﺎﺕ‬ ‫‪ -1‬ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺴﻼﻣﺔ‬ ‫‪-2‬ﺍﻟﺘﺨﺰﻳﻦ‬ ‫‪-3‬ﻣﻌﻠﻮﻣﺎﺕ ﻋﺎﻣﺔ‬ ‫ﺍﻟﻤﻴﺰﺍﺕ ﺍﻟﺮﺋﻴﺴﻴﺔ‪.‬‬‫ﺍﻻﻛﺴﺴﻮﺍﺭﺍﺕ‪.‬‬‫ﺍﻟﻠﻮﺣﺔ‪.‬‬‫ﺟﻬﺎﺯ ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ‪.‬‬‫‪ -4‬ﺗﺮﻛﻴﺐ ﺍﻟﺮﻳﺴﻴﻔﺮ‪.‬‬ ‫ﺍﻟﺨﻄﻮﺍﺕ ﺍﻻﻭﻟﻰ‪.‬‬‫ﻗﺎﺋﻤﺔ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ‪.‬‬‫‪-Q&A‬‬ ‫‪-5‬ﻋﻤﻠﻴﺎﺕ ﺍﻟﻘﺎﺋﻤﺔ‬ ‫ ﺍﻟﻘﻨﺎﺓ‪.‬‬‫ ﻗﻨﺎﺓ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ‪.‬‬‫ ﺍﺿﺎﻓﺔ ﻗﻨﺎﺓ‪.‬‬‫ﺍﻟﺘﺮﻛﻴﺐ‪.‬‬‫ﺍﻟﻔﺤﺺ ﺍﻟﺘﻠﻘﺎﺋﻲ‪.‬‬‫ ﺍﺿﺎﻓﺔ ﻗﻤﺮ ﺻﻨﺎﻋﻲ‪.‬‬‫ ﺗﺤﺮﻳﺮ ﻗﻤﺮ ﺻﻨﺎﻋﻲ‪.‬‬‫ ﺣﺬﻑ ﻗﻤﺮ ﺻﻨﺎﻋﻲ‪.‬‬‫ﺍﻟﻨﻈﺎﻡ‪.‬‬‫ ﺍﻟﻠﻐﺔ‪.‬‬‫ ﻧﻈﺎﻡ ﺍﻟﺘﻠﻔﺰﻳﻮﻥ‪.‬‬‫ ﺍﻻﻏﻼﻕ ﺍﻟﺘﻠﻘﺎﺋﻲ‪.‬‬‫ ﺍﻋﺪﺍﺩﺍﺕ ﻧﻈﺎﻡ ﺍﻟﺘﺸﻐﻴﻞ‪.‬‬‫‪ -‬ﻗﻔﻞ ﺍﻟﻮﺍﻟﺪﻳﻦ‪.‬‬

‫‪1‬‬


User Manual  

User Manual for Mini AV

Read more
Read more
Similar to
Popular now
Just for you