Napier Parking – Three simple tips for parallel parking
The second tip is to ‘cut’ the wheel after you are aligned with the second car. This means that you need to turn the wheel in such a way that the tyres are adjusted to the parallel park. Turn the wheel clockwise, about three quarters of the way from the bottom of the wheel. Once the wheel has been positioned in this way, you’ll be ready to perform the perfect parallel park. The last trick is a simple one; do your best not to pull the car up too close to the kerb. Instead; try to fix the car slightly once you’ve already backed in. Driving forward is generally much easier for new drivers. If you’re doing the park as part of your driving test, provided you’re within 12 inches of the kerb, the driving test instructor should pass you on this part of the exam.
Napier Parking – Angle parking for beginners Angle parking, although not quite as challenging as parallel, can still be q uite tricky to learn. However with repeated practice new drivers can quickly become proficient in this essential skill. Here is a brief guide to help beginners familiarise themselves with this method of parking. Firstly, the driver should check for on-coming traffic and turn on their signal lights. The parking space should be approached from about five feet away from the cars which are parked to the right. Once the front bumper is lined up with the entrance to the parking space, you can begin to gently steer the car to the right. Remember to move slowly, and steer very carefully to ensure that the left side of the car’s front bumper doesn’t hit the parked car on the left. Keep an eye on the front end of the car, and make sure that the bumper is not touching the barrier, but is close to it. If there is a curb, you should ease the wheels near to it. Then set the parking brake, and put the gear shift into the parking position. Although getting into an angle parked space is quite straightforward, leaving it can be slightly more difficult, as there are blind areas which are created by the parked cars to the right. When doing this, firstly shift to reverse, and check for pedestrians, traffic and blind spots. Moving very cautiously and slowly, reverse the car inch by inch until you can be sure that there is no oncoming traffic. If it’s all clear, then you can continue to drive straight back. As the front bumper of your car passes the rear bumper of the car parked to your left, remember to steer towards your right. Once your car becomes parallel to the road or street’s edge, you can stop, put the gear shift into drive and carry on.
Published on Jul 14, 2012
Published on Jul 14, 2012
The second tip is to ‘cut’ the wheel after you are aligned with the second car. This means that you need to turn the wheel in such a way tha...