Issuu on Google+

ASSEMBLY INSTRUCTIONS

Main illustration: Premier Combo Chair with Arm Rest deployed

Arm Rest extended

Rifle Stock Rest

Shotgun Format

Premier Combo Chair

Standard Combo Chair

(Rifle and Shotgun Chair Combined) with

(Rifle and Shotgun Chair Combined) Can be Retro-Fitted with

Arm Rest extendable to Rifle Stock Rest

Arm Rest extendable to Rifle Stock Rest


CONTENTS 3 4 5 6 7 8 9 10 11 12

Components List Tripod Base & Seat Beam Attach Seat Beam to Tripod Base with Clutch Screw Attach Back Support to Seat Beam Shotgun Chair Format Attach Front Rifle Support Arm to Seat Beam Standard Combo Chair Format Attach Arm Rest/Rifle Butt Rest Arm Rest/Rifle Butt Rest (For Right & Left Hand Shooting) Premier Combo Chair Format


ASSEMBLY & USER INSTRUCTIONS BUILD TIME 1 min. 25 sec. - No Tools!

1 - Tripod Base

2 - Seat Beam

5 - Rifle Support Arm with Gun Cradle

6mm Retaining Bolt with Winged Thumbscrews

Back Side Plates

Front Side Plates Pivot Bolt (Standard Combo Chair)

Pivot Bolt

3 - Clutch Screw

Front Arm pivot locking Handwheel Knobs

4 - Back Support

6 - Arm Rest extendable to Rifle Stock Rest

Components: 1 Tripod Base 2 Seat Beam 3 Clutch Screw 4 Back Support 5 Rifle Support Arm with Gun Cradle 6 Rifle Arm/Butt Rest

Pivot Bolt (Premier Combo Chair)

3


Step 1 - Tripod Base Keep surface smooth and clean. Smear with Silicone grease occasionally

Tripod Star Winged thumbscrew

Spread Tripod Legs and lock out by pushing tripod star down NOTE: The winged thumbscrew should be tightened after leg adjustment with detent pin inserted through each leg.

Step 2 – Seat Beam to Tripod Base

Insert The Seat Beam Stub into the bearings in top of the Tripod Base.

4


Step 3 – Attach Seat beam to Tripod Base with Clutch Screw

Pin

Hole

Please be aware! the pin in the bottom of the Seat Beam Stub locates into the hole in the clutch disc when fully screwed in!

Screw the Clutch Screw into the threaded hole in the Seat Beam Stub taking care to locate the pin into the hole in the clutch disc as shown above.

NOTE: The Clutch Screw should be tightened until there is no up and down or rocking movement between the tripod Base and the Seat Beam! By tightening the Clutch Screw you can reduce the ease by which the seat can swivel. Over tightening may cause friction damage.

5


Step 4 – Attach Back Support to the Seat Beam

Unscrew the winged thumbscrew. Remove the pivot bolt.

Insert the Back Support between the Seat Beam Back Support side plates.

Re-insert the pivot bolt through the side plate, Back Support and out through the opposite side plate. Screw the winged thumbscrew on to the pivot bolt threads and tighten.

6


SHOTGUN CHAIR Format The shotgun chair format converts to rifle format in a matter of seconds

Height: 57cm (lowest) 22.44 inches Clips for carrying strap. (Strap provided). Collapse the legs, fold the backrest down to the seat for compact carrying.

Height: 70cm (highest) 27.56 inches

This is excellent for Shotgunning! Although seated, you can stand very quickly and much more easily from this position. You can also use the chair swivel to take shots sitting down if desired. 7


Step 5 – Attach Rifle Support Arm to the Seat Beam Pivot the Rifle Support Arm until the locking bolt with the 2 handwheel knobs locates the adjusting slots in the front side plates at the bottom of the Rifle Support Arm.

Loosely tighten the Front Arm pivot , locking Handwheel Knobs.

(Remove 6mm retaining bolt, which is located here for transportation purposes).

Slide the Rifle Support Arm on to the front of the Seat Beam.

Insert the 6mm retaining bolt and tighten using the winged thumbscrews.

8


TOTAL BUILD TIME 1 min. 25 sec. – No Tools! STANDARD COMBO CHAIR, Ready to go! The rifle format converts to shotgun format in a matter of seconds

9


Step 6 – Attach Arm Rest/Rifle Stock Rest

Remove Standard Rifle Chair pivot bolt

Replace Standard Rifle Chair pivot bolt with the longer Premier Rifle Chair pivot bolt

Place the Arm Rest/Rifle Stock Rest on to the protruding pivot bolt

Secure the Arm Rest/Rifle Stock Rest by screwing the winged thumbscrew on to the exposed threads of the pivot bolt NOTE: The two black spacing washers either side of the Arm/Rifle Butt Rest are held lightly in place by a small piece of double sided adhesive. These are not permanently fixed merely attached for ease of attachment!

10


FRONT RIFLE SUPPORT ARM ARM REST/RIFLE BUTT REST RIGHT SHOULDER/RIGHT HAND SHOOTING View from the front!

Clamp adjustment thumbscrew (green)

FRONT RIFLE SUPPORT ARM ARM REST/RIFLE BUTT REST LEFT SHOULDER/LEFT HAND SHOOTING View from the front!

Clamp adjustment thumbscrew (green)

11


COMPLETE – PREMIER COMBO CHAIR, ready to go! The rifle format converts to shotgun format in a matter of seconds (Illustration: Arm/Rifle Butt Rest - right hand, right shoulder shooting)

12


From all the Team at Idleback ENJOY YOUR SHOOTING BUT ABOVE ALL BE SAFE! and PROMOTE BEST PRACTICE!


Standard Combo Chair Split

Shotgun Chair

Standard Combo Chair Premier Combo Chair

Idleback USA Inc, 9360 West Flamingo Rd #110-555, Las Vegas, Nevada 89147-6426 Telephone: 1-702-405-8417 Email: sthompson@idlebackusa.com Website: www.idlebackusa.com


chair-assembly-instruction-usa