Issuu on Google+

Rev. 1/10

EXPEDMT 2008 - Newer Expedition Console Installation Instructions

1. Remove factory console (if necessary). 2. Attach Expedition mount bracket between front seat rails using factory bolts. 3. Attach console to front Expedition bracket using 5/16 x 3/4” inch bolt, fender washer and star washer provided. (leave loose for later height adjustment). 4. Attach console to rear bale bracket assembly using 5/16 x 3/4” inch bolt, fender washer and star washer provided (leave loose for later height adjustment). 5. Attach rear bale bracket assembly to vehicle floor with proper sheet metal screws not provided. Caution: When mounting consoles or rear brackets to vehicle floor using sheet metal screws, use the shortest screw possible and grind off the pointed tip. Screws should not penetrate the vehicle body by more than 1/4”. Long screws can hit the drive shaft or other transmission parts, which move up and down as the vehicle is driven. 6. Determine desired height of console within front and rear brackets and tighten all 5/16” bolts

SPECIALISTS IN EMERGENCY VEHICLE PRODUCTS SINCE 1978 • DESIGN, MANUFACTURING, DISTRIBUTION AND INSTALLATIO


EXPEDMT08_ 2008-Newer