Craft Design Technology - Homework 1

Craft Design Technology - Homework 2

Craft Design Technology - Homework 3

Craft Design Technology - Homework 4

Craft Design Technology - Homework 5

Craft Design Technology - Homework 6

Craft Design Technology - Homework 7 Shown below is a picture of a pedestal drill.

Craft Design Technology - Homework 8

Craft Design Technology - Homework 9

Craft Design Technology - Homework 10 An Aluminium letter holder is shown below

Craft Design Technology - Homework 11 A Bicycle lock is shown below

Craft Design Technology - Homework 12

Craft Design Technology - Homework 13 Fill the box below with straight and parallel lines. DO NOT use a straight edge!

Divide the box below into two. Then divide one of those boxes in two. Keep going until you canâ&#x20AC;&#x2122;t draw another line. â&#x20AC;&#x192;

Craft Design Technology - Homework 14 Accurately sketch circles, arcs and curves in each of the following boxes.

Craft Design Technology - Homework 15 Add thick and thin line and shading to the following object. Please use colour.

Craft Design Technology - Homework 16 Using the correct techniques demonstrated to you in class. Complete the following three tonal scales. lightest

2B pencil

darkest

lightest

Colour Pencil

darkest

Colour Pencil

lightest

darkest

Craft Design Technology - Homework 17 Apply colour, to show three different shades to the following four blocks using the tonal scale as a guide. The light is shining down from the left.

Light Source

Craft Design Technology - Homework 18

Craft Design Technology - Homework 19

Craft Design Technology - Homework 20 In Craft Design Technology we always use mm when measuring because it is more accurate. Measure the lines shown below with a ruler and write the size above each line. Remember 1 centimetre = 10mm

Accurately measure and draw the the following lengths of line. 100mm, 15mm, 147mm, 90mm 125mm, 27mm

Craft Design Technology - Homework 21

Measure and write your answers alongside each line. note: a protrator will be required to measure the angles.

Craft Design Technology - Homework 22

Measure accurately and list your answers below as shown. A .... mm B .... mm

Craft Design Technology - Homework 23 The ability to understand orthographic drawings is vitally important to anyone who wants to work within a wide range of Jobs or professions. Please complete the following:

Craft Design Technology - Homework 24 The ability to understand orthographic drawings is vitally important to anyone who wants to work within a wide range of Jobs or professions. Please complete the following:

BGE - S1 homework

BGE - S1 homework