Basics of Lawn Mower Repair Ashland You Need to Know
While it is recommended to get your troubling mower fixed at a local lawn mower repair Ashland store, knowing some basics of lawn mower repair will cause no harm; instead this knowledge will help you perform some simple checks and enable you to fix minor faults on your own. In this post, you will read some of the most common problems that take place with lawn mower engine. We will also outline some major parts of your small engine and learn how to troubleshoot them. â—?
Before you begin, remove the spark plug
Once you are set to troubleshoot and repair your lawn mower, the first thing you must do is to remove the spark plug from the machine. This is a vital step to ensure the mower engine doesnâ€™t get started automatically while you are working on it. Besides, donâ€™t forget to wear safety gears like gloves and eyewear to prevent any physical injury during the repair job.
Examine the spark plug
Before you start disassembling all engine parts, take a quick look at the spark plug. If you notice presence of melted metal near the plug gap, it indicates that there is contaminated oil in the engine. Meaning, you need to change the engine oil. If you find that spark plug is damaged, visit a local lawn mower repair Ashland store. â—?
Check the ignition system
Look carefully if all wiring is in proper condition. If you find any sign of wear or grime, take the required actions and your small engine will be running again. It is strongly recommended to avoid testing ignition system on own unless you have thorough knowledge and skills for the same. Spending a few dollars is certainly better than getting severely injured.
Clean the carburetor
Clogged up carburetor is one of the most common culprits behind lawn mower engine problems. This is why before you begin repairing any of the small engine part, it is important to clean the carburetor first. You can clean the metal parts by putting them in gasoline for 10-12 hours. But make sure you don’t put plastic parts in gasoline. Next you need to check if the jets of the carburetor aren’t blocked. You can use a thin wire to clean these different parts. And carry a flashlight to have clear visibility during the cleaning process. ●
Inspect the fuel tank lines
If your lawn mower engine isn’t starting at all, chances are its gas cap is blocked by debris and dust. You can use a thin wire to clear the debris from the hole. Some lawn mower engines feature push primer which is mainly responsible to create a perfect blend of air and fuel for the functioning of the engine. You need to see if the air hole isn’t clogged up and there is no mechanic damage on any component.
If you have no expertise and experience repairing a small engine, it is best to avoid repairing your lawn mower on own. It is a more sensible choice to take your mower to a local lawn mower repair shop in Ashland and get your machine running again with minimal expense. There are many parts of lawn mower that are highly affordable. You can get them replaced by a mower repair technician and begin with lawn mowing confidently. If you have no expertise and experience repairing a small engine, it is best to avoid repairing your lawn mower on own. It is a more sensible choice to take your mower to a local lawn mower repair shop in Ashland and get your machine running again with minimal expense. There are many parts of lawn mower that are highly affordable. You can get them replaced by a mower repair technician and begin with lawn mowing confidently.
On top of all, make sure you always follow the guidelines and recommendations of the manufacturer every time you use your lawn mower. Knowing doâ€™s and donâ€™ts of lawn mowing will help you prevent the need of visiting a lawn mower repair Ashland shop in emergency. For more information visit www.metrowestlawnandpower.com