Issuu on Google+

A NEW DATA LOGGER Stand alone. Secure. Fast.


– A data logger for profe Extensive functions LogMessage data loggers are universal. Whatever the application – for slow or for high-speed acquisition – Delphin has a LogMessage version for any user requirements. Delivery includes the ProfiSignal Go software to enable professional evaluation of online and offline data. LogMessage devices function intuitively making it easy to configure inputs, to save data, and to display data as trends.

LogMessage devices are designed for permanent operation and can be depended on to perform reliably over the long term. When data security and reliability are top priorities, users choose the "Made in Germany" logger.

A range of interfaces LAN interface Device configuration and online data transfer to PC Link to UMTS-routers Log memory read-out Modbus TCP for data transfer using PLC USB interface Log memory read out Serial interfaces 4 x RS232/485 Customer-specific protocols (ASCII)

Offline LAN UMTS / Internet

USB

Universal sensor connection LogMessage devices are precision instruments that can be switched via software to function with any type of sensor. Universal use of analog inputs for mA-, mV-signals, RTDs, or any thermocouple Signal rate of 0.1 Hz to 10 kHz Digital inputs suitable for up to 90 VDC Frequency inputs up to 35 kHz

Galvanic isolation included LogMessage devices are fully protected against earth loops enabling measurements from non-isolated sources. All analog inputs can function as differential inputs Isolation voltage between analog inputs: 110 VDC to a maximum of 650 VDC Galvanic isolation between power supply and each interface No earth loop problems

Analog out Frequency/ Digital Counter in/out Thermoc Thermo


ssionals

couples

Applications Secure data acquisition with stand alone capability

Fault diagnostics at machine/plant

PC-independent measurement and testing

Status and event logging

Acquisition via universal inputs

Energy efficiency measurements

Product testing, laboratory, R&D

GPS data logging and remote monitoring

Mobile data acquisition

Temperature data acquisition

Online

Secure data storage The LogMessage's data storage capability enables it to function without PC or network support. 3.5 GB of memory for 250 million data records Each measurement data record is recorded with a time-stamp (date and time – at microsecond precision) Measurement data can be assigned to groups and used as triggers No data loss in the event of power failure Alarm management with pre and post alarm data

Comprehensive signal processing

RS232/485 20 mA Volt/mV RTD

Software channels, configurable according to requirements, can be used for online calculation, monitoring, and many other functions. This enables data to be generated that is immediately usable. Online calculations performed on measurement data (e.g. temperature differentials) Integration functions (e.g. flows to volumes) Limit value monitoring with alarm functions (switching digital outputs) Counter function and operational data acquisition

Resolutions for demanding requirements LogMessage devices are suitable for both slow- and high-speed measurements. Time resolution for analog measurement data is at 100-Âľs precision levels; digital resolution at millisecond precision. The devices are equipped for precision measurement with 24-Bit ADCs.


Versions Typ Analog input (mV, mA, thermocouple) Analog inputs (mV, mA, thermocouples, RTD) Analog output (mV, mA) Digital inputs (frequency measurement) Digital outputs (mV) Sampling rate in measurements per sec. Isolation voltage DC (AI to AI)

LM 1000 15

LM 2000

LM 3000 15

LM 4000 8

10

600 110

LM 5000

LM 6000 15

16

10

1 12 (11)

2 28 (2)

1

24

17 600 110

1 600 110

5 10000 100

1 1200 110

LogMessage is available in nine different versions. LogMessage is a genuine high-speed logger with sampling rates of up to 10,000 measurements per second.

LM 7000 30

LM 8000 15

LM 9000 20 2

12 (11) 80 650

1200 110

16 600 110

2 1200

110

The LM 5000 version has an increased isolation voltage of up to 650 VDC between inputs.

Web server included LogMessage devices are equipped with internal web servers. The standard version displays current measurement data in a channel list as well as extensive configuration and maintenance information. In combination with the ProfiSignal WEB option, views can be generated and loaded into the LogMessage in HTML5.

Online analysis Calculation channel

Software channels Software channels are capable of performing computations on online measurement data, and used for visualisation, storage or monitoring purposes. The processing of signals takes place independently within the LogMessage device and requires no PC support. There is virtually no limit on the number of software channels that can be used. Software channel computations run parallel to data acquisition and logging. Software channels are included in delivery.

Channel averaging Edge counter Differentiator Integrator Linearization

Description Any number of channels can undergo computation procedures. Functions include: basic arithmetic functions; trigonometry; binary and boolean operations Computation of moving and triggered averages Counter for impulses (high, low, and reset functions) Computes changes over time

Numerical integration over time Corrective calculations on non-linear sensors Accumulates the time (in hours) of a digital signal's Operating hours counter high-level Computes moving and triggered statistical values Statistic channel (min, max, variant, standard deviation) Time measurement between two events Stopwatch

Monitoring Limit value Batch alarms Wake function Status monitoring

Description Generates events for threshold violations (over- / under-runs, inertia, hysteresis, process monitoring) Generates a single alarm from multiple input channels Generates pulses at a chronological point in time (once a day, week, month‌) Evaluates status information for measurement data and generates an alarm


– included Quick to deploy LogMessages are delivered with the professional PCsoftware ProfiSignal Go, used for online/offline monitoring and measurement data analysis. Just three steps are required to display measurement data as trends, to analyse the data, and to evaluate offline data.

with ProfiSignal Go, the DataService also provides many alarm management and monitoring functions. The DataService enables ProfiSignal to function efficiently and powerfully as well as to process large data volumes via multiple and diverse interfaces.

ProfiSignal Go has a choice of diagrams that can be run simultaneously. The integrated DataService software provides data storage and archiving functions. In combination

Product features Monitoring and analysis of any type of measurement data Saving experiments to individual files Online portrayal in trends Uninterrupted switching to offline data ASCII-export as CSV-file Printout or export as EMF file Offline computation functions Statistical valuation Analysis with cursor functions up to µsec ProfiSignal Go Trend

Saving of diagram configuration data Evaluation of digital signal operation

Included in delivery LogMessage devices are delivered with a comprehensive package of software. ProfiSignal Go LabVIEW™ and DASYLab™ drivers OPC-Server Modbus TCP OCX driver to enable self-programming

+


– Technical specifications LogMessage Analog inputs Voltage/current measurement ranges Sensors Potential isolation

Resolution

± 156 mV ... ± 10 V / 0/4 ... 20 mA Thermocouples of any type; integrated temperature compensation; resistance thermometer RTD, NTC and linear resistances to 10 kΩ 750 VDC to the system and power supply; 650 VDC between channels for LogMessage 5000; 100 VDC between channels for LogMessage 4000; 110 VDC between channels for other versions 24-Bit precision V, mA 0.01 % from accumulated value; 14-Bit measurement precision: V, mA 0.1 % from accumulated value for LogMessage 4000; Pt100 0.1 K; Pt1000 0.1 K; thermocouple 0.1% from accumulated value

Analog outputs Resolution / potential isolation Output signal

16-Bit / 750 V; 12-Bit for LogMessage 4000 0/4 ... 20 mA at a maximal max. load 650 Ω; 0 ... 10 V min. 2.5 kΩ for LogMessage 4000

Digital inputs Potential isolation Input measurement range

2,5 kV low: 0 ... 1.5 VDC@0 ... 1.5 mA / high: 3.5 ... 90 VDC@2 mA

Frequency / counter inputs Potential isolation / measuring range Measurement frequency

2.5 kV / low: 0 ... 1.5 VDC@0 ... 1.5 mA / high: 3.5 ... 90 VDC@2 mA up to 30 kHz at TTL-level

Digital outputs Potential isolation Switching voltage

2,5 kV max. 50 VDC@2.5 A

Data storage

Interfaces Mechanical design COM 1 / COM 2 Mechanical design COM 3 / COM 4 Protocols COM 1 ... COM 4 Ethernet USB CAN

RS485, 9-pole Sub-D-connector, DIN EN ISO 19245-1 RS232, 9-pole Sub-D-plug Modbus RTU Master / Slave, customer-specific protocols RJ45 (8-pole STP-connector), 100 BaseT protocol: TCP/IP, HTTP, SMTP, NTP, Modbus TCP Client / Server USB 1.1 for memory read out 9-pole Sub-D-connector, protocols: CAN Raw; baud rates: 50 k ... 1 MBaud

General technical information Dimensions Weight Rail mounting Signal connections Temperature range Power supply

Delphin Technology AG Lustheide 81 51427 Bergisch Gladbach . Germany

200 x 73 x 118 mm 1 kg DIN EN 50023 or screw fixings Detachable screw terminals, 33 terminals in 2 rows, lead protection, connecting cabling max. 2.5 mm² -20 ... 60 °C 12 ... 36 VDC / 12 ... 28 VAC eff. / ± 10%; LogMessage 4000: 18 VAC/DC power input: < 10 Watt

Phone +49 (0) 2204 97685-0 Fax +49 (0) 2204 97685-85 info@delphin.de . www.delphin.com

Layout: www.team-mt.de., 1. print 06/12

Max. size / measurement data

Partitionable storage, standard: 3.5 GB; max. 250 million measurement records 15.5 GB; up to 1 billion measurement records; 15.5 GB; up to 7 billion measurement records for LogMessage 4000

ISO 9001 certified

Standard size / measurement data


LogMessage Series x000