Issuu on Google+

ALUMINIUM


2


Company Profile and Map Aluminium Sheets/Plates Aluminium Coils

Aluminium Tread Plates Aluminium Barely Seed Plates Aluminium Gangway Profiles Aluminium Bars - Round Aluminium Bars - Square Aluminium Bars - Hexagonal

Aluminium Profiles - Flat

Aluminium Profiles - U, T, L Aluminium Tubes - Square and Rectangular Aluminium Profiles - Nature Anodized Aluminium Aluminium Aluminium Aluminium

Profiles - Bulb Tubes - Round - Roller Tubes - Cylinder Tubes

Aluminium - Fittings Transport Systems

Aluminium - Cargo Sections Aluminium/Steel - Joint Compositions Aluminium - Strongbacking

Aluminium - Special Profiles

Colour Marks According to Alloy Machining

Technical Information Reference Table

Terms of Sale and Delivery

Edition 2011/2012


Company Profile

Alumeco A/S, Odense

Alumeco A/S Who is Alumeco A/S Alumeco is the leading aluminium whole­ saler in

Alumeco A/S was established in 1983. Since then the

Scandinavia. We are a modern trading company work­

company has expanded and today the group has seve­

ing in accordance with the motto “Just in time”. Our

ral subsidiaries abroad.

prime duty is to meet the demands of our customers.

Scandinavia's most extensive aluminium stock From our head office at Naesbyvej in Odense, Alumeco offers a very wide range of aluminium profi­ les, special profiles, bars, tubes, plates and coils. We have Scandinavia's most extensive stock with more than 5000 tons of aluminium. In addition Alumeco has its own service center, enabling us to offer sawing of plates and profiles as well as foil application.

4


How to find Alumeco A/S

MOTEL NÆSBYLUND KRO

Address Alumeco A/S

GAMMELSØ

Naesbyvej 26 DK-5000 Odense C. Phone: +45 66 17 81 17 +45 66 14 58 71

Fax:

SB

VE

Y

Email: e-mail@alumeco.dk

J

RADISON SAS H.C. ANDERSEN HOTEL - ODENSE

ØST

RE S TA

TIO

NSV

EJ

ÅLØKKE ALLÈ

Web: www.alumeco.com

PLAZA HOTEL ODENSE

RUGÅRDSVEJ

LØKKEV

EJ

53

GRØN

161 Odense V Havn

Blommenslyst Motorway Middelfart/Odense E20 Exit 53 on the motorway

kkevej is approx. 12 km rønlø to G MIDDELFARTVEJ ce tan s i D

E20

5


Aluminium Sheets/Plates / Aluminium Coils

Chemical Composition: EN AW-1050A - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Zn

Ti

Others

Al

0.25

0.4

0.05

0.01

0.05

0.07

0.05

0.03

99.5

Mechanical Properties - EN 485-2: 2008 Temper

Thickness

mm

Tensile strength Rm N/mm2 min.

max.

0.2% proof stress Rp 0.2 N/ mm2

Elongation A50 mm A

min.

% min.

Brinell足 hardness HBS

% min.

O/H111

0,5-80

65

95

20

22-35

20

H112

6,0-80

70-75

145

25-30

20

22-23

H14

0,2-25

105

145

85

2-6

34

H24

0,2-12,5

105

150

75

3-8

33 For more information see page 56

Special Characteristics: Corrosion resistance

Suitability for anodizing

Weldability

Good

Not suited for anodizing

Excellent

6


Aluminium Sheets/Plates - EN AW-1050A EN 573-3, 485-1, 485-2, 485-3, 485-4 Thickness

Kg/pcs.

mm

1000 x 2000 mm O/H111

Kg/pcs.

H14/ H24

1250 x 2500 mm H14/ H24

O/H111

0.5

2.7

0.6

3.3

0.7

3.8

1.0

5.4

*•

8.5

1.25

6.8

*•

10.6

1.5

8.1

*•

12.7

2.0

10.8

*•

17.0

Kg/pcs.

4.3

1500 x 3000 mm H14/ H24

O/H111

• •

8.5

12.2

*•

15.2

*•

18.3

*•

24.3

2.5

13.5

21.1

30.5

3.0

16.2

25.4

36.6

4.0

21.6

34.0

48.8

5.0

27.0

42.2

61.0

6.0

32.4

72.9

* Stocked in deep drawn quality (DDQ). All sheets/plates can be supplied with PE-foil.

Aluminium Sheets - Stucco - EN AW-1050A EN 573-3, 485-1, 485-2, 485-4

Stucco

Thickness mm

Kg/pcs.

1000 x 2000 mm

0.8

4.4

1.0

5.4

1.5

8.1

Kg/pcs.

1250 x 2500 mm

8.5

12.7

Aluminium Coils - EN AW-1050A - EN AW-5754 EN 573-3, 485-1, 485-2, 485-4 Thickness mm

Kg/m2

1000 mm

1250 mm

0.7

1.89

1.0

2.7

1.5

4.05

2.0

5.4

Cut to length, on inquiry other alloys and dimensions can be offered.

Aluminium Coils for insulating Alloy EN AW-3103/3003 in coils of 250/1000 kg. ID= 500 mm.

EN 573-3, 485-1, 485-2, 485-4

Alloy EN AW-5052 in coils of 250/500 kg. ID= 500 mm.

EN 573-3, 485-1, 485-2, 485-4

0.63 x 1000 mm

0.75 x 1000 mm

0.63 x 1000 mm

0.75 x 1000 mm

0.88 x 1000 mm

1.00 x 1000 mm

0.88 x 1000 mm

1.00 x 1000 mm

All stated weights are theoretical weights, which may vary.

Alloy EN AW-1050A H14 Stucco in coils of approx. 500 kg. ID: 508 mm. 0.70 x 1000 mm

1.00 x 1000 mm

Alloy EN AW-1050A H14 Stucco in coils of approx. 250 kg. ID: 508 mm. 0.80 x 1000 mm

7


Aluminium Sheets/Plates

Chemical Composition: EN AW-5754 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.4

0.4

0.1

0.5

2.6-3.6

0.3

0.2

0.15

Rest

Mechanical Properties - EN 485-2: 2008 Temper

Thickness

Tensile strength Rm N/mm2

0.2% proof stress Rp 0.2 N/ mm2

Elongation A50 mm A

mm

min.

max.

min.

% min.

O/H111

0.5-12.5

190

240

80

12-18

O/H111

12.5-100

190

240

H112

12.5-25

190

H22/32

0.20-12.5

220

270

130

7-10

H24/34

0.20-12.5

240

280

160

6-10

Brinell足 hardness HBS

% min. 52

80

17

52

90

10

58 63 70

For more information see page 56

Special Characteristics: Corrosion resistance

Suitability for anodizing

Weldability

Excellent

Good

Excellent

8


Aluminium Sheets/Plates - Sea water-resistant - EN AW-5754 EN 573-3, 485-1, 485-2, 485-3, 485-4

Thickness Kg/pcs. 0.5-6 x 1000 x 2000 mm Kg/pcs. 0.7-6 x 1250 x 2500 mm Kg/pcs. 1-6 x 1500 x 3000 mm 8-60 x 1020 x 2020 mm 8-30 x 1270 x 2520 mm 8-140 x 1520 x 3020 mm mm H22/32

H112/H111

H22/32 - H24/34

H112/H111

0.5

2.7

0.7

3.8

5.9

1.0

5.4

8.5

1.2

6.5

10.2

1.5

8.1

12.7

2.0

10.8

17.0

2.5

13.5

21.1

3.0

16.2

25.4

4.0

21.6

34.0

5.0

27.0

42.2

6.0

32.4

50.6

8.0

44.5

69.2

10.0

55.7

12.0

66.8

15.0

83.5

20.0

111.3

25.0

139.1

H22/32

H112/H111

12.2

18.3

24.3

30.5

36.6

48.8

61.0

72.9

99.4

86.4

124.2

103.7

149.1

129.6

186.3

172.8

248.4

216.0

310.5

259.2

30.0

166.9

372.6

*35.0

194.7

434.7

40.0

222.5

496.8

50.0

279.0

621.0

60.0

334.0

746.0

70.0

893.0

80.0

1020.0

90.0

1148.0

100.0

1276.0

120.0

1531.0

140.0

1658.0

* Price is dimension dependent.

All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil.

9


Aluminium Sheets/Plates

Chemical Composition: EN AW-5754 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.4

0.4

0.1

0.5

2.6-3.6

0.3

0.2

0.15

Rest

Mechanical Properties: Temper

Thickness

Tensile strength Rm N/mm2

0.2% proof stress Rp 0.2 N/mm2

Elongation A50 mm A

Brinell­ hardness HBS

mm

min.

max.

min.

% min.

O/H111

0.5-12.5

190

240

80

12-18

52

H22/32

0.2-12.5

220

270

130

7-10

63

H24/34

0.2-12.5

240

280

160

6-10

70

GradeA

3-12.5

230

140

10-11

% min.

63 For more information see page 56

Chemical Composition: EN AW-5083 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.4

0.4

0.1

0.4-1.0

4.0-4.9

0.05-0.25

0.25

0.35

Rest

Mechanical Properties - EN 485-2: 2008 Temper

Thickness

mm

Tensile strength Rm N/mm2

0.2% proof stress Rp 0.2 N/mm2

Elongation A50 mm A

min.

max.

min.

% min. 11-15

Brinell­ hardness HBS

% min.

O/H111

3-6.3

275

350

125

O/H111

6.3-80

270

345

115

75

GradeA

3-12.5

305

220

H116

12.5-40.0

305

215

10

89

H116

40.0-80.0

285

200

10

83

14-15 10-12

73-75 89

For more information see page 56

10


Aluminium Sheets/Plates - Sea water-resistant - EN AW-5754 - »Super-size« EN 573-3, 485-1, 485-2, 485-3, 485-4

Thickness Kg/pcs. 2000 x Kg/pcs. 2000 x mm 5000 mm 6000 mm 3.0

81.0

*•

4.0

108.0

*•

130.0

*•

5.0

135.0

162.0

6.0

162.0

195.0

7.0

189.0

227.0

8.0

216.0

260.0

10.0

270.0

* Can be supplied with PE-film 1 side.

Aluminium Sheets/Plates - Sea water-resistant - EN AW-5083 - »Super-size« EN 573-3, 485-1, 485-2, 485-3, 485-4

Thick- Kg/pcs. 2000 x Kg/pcs. 2000 x Kg/pcs. 2000 x Kg/pcs. 2400 x Kg/pcs. 2400 x ness 4000 mm 6000 mm 8000 mm 6000 mm 8000 mm mm 3.0

97.2

4.0

130.0

5.0

162.0

6.0

195.0

7.0

227.0

8.0

260.0

10.0

324.0

389.0

12.0

264.4

15.0

330.5

20.0

440.7

25.0

551.0

30.0

661.0

40.0

882.0

50.0

1102.0

260.0

156.0

234.0

311.0

415,0

All stated weights are theoretical weights, which may vary.

11


Aluminium Sheets/Plates

Chemical Composition: EN AW-5083 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.4

0.4

0.1

0.4-1.0

4.0-4.9

0.05-0.25

0.25

0.15

Rest

Mechanical Properties - EN 485-2: 2008 Temper

Thickness

mm

Tensile strength Rm N/mm2

0.2% proof stress Rp 0.2 N/mm2

Elongation A50 mm A

min.

max.

min.

% min.

Brinell­ hardness HBS

% min.

O/H111

0.2-6.3

275

350

125

11-15

75

O/H111

6.3-12.5

270

345

115

16

75

O/H111

12.5-80.0

270

345

115

14-15

73-75

O/H111

80.0-120.0

260

110

12

70

O/H111

120.0-200.0

255

105

12

69

For more information see page 56

Special Characteristics: Corrosion resistance

Suitability for anodizing

Weldability

Excellent

Protective anodizing

Excellent

High tensile strength; particularly used in shipbuilding and tank industries as well as for moulds in plastic and furniture industries

12


Aluminium Sheets/Plates - Sea water-resistant - EN AW-5083 EN 573-3, 485-1, 485-2, 485-3, 485-4

Thick- Kg/pcs. 2-6 x 1000 x 2000 mm Kg/pcs. 2-6 x 1250 x 2500 mm Kg/pcs. 2-6 x 1500 x 3000 mm ness 8-20 x 1020 x 2020 mm 8-20 x 1270 x 2520 mm 8-140 x 1520 x 3020 mm mm 150-220 x 1520 x 2800 mm 2.0

10.8

17.0

24.3

3.0

16.2

25.4

36.6

4.0

21.6

34.0

48.8

5.0

27.0

42.2

61.0

6.0

32.4

50.6

72.9

99.4

8.0 10.0

55.7

124.2

12.0

66.8

149.1

15.0

83.5

186.3

20.0

111.3

248.4

25.0

319.0

*•

30.0

382.8

*•

40.0

510.4

*•

50.0

638.0

*•

60.0

765.0

*•

70.0

855.0

80.0

994.0

100.0

1221.0

120.0

1531.0

130.0

1658.0

140.0

1786.0

150.0

1756.0

160.0

1873.0

180.0

2107.0

200.0

2341.0

220.0

2575.0

All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil.

All stated weights are theoretical weights, which may vary.

Can be supplied in thickness up to 750 mm. *) Can also be supplied in dimension 2000 x 4000 mm. Plates from 6 to 20 mm in thickness can be supplied with DNV-certificate.

13


Aluminium Sheets/Plates

Chemical Composition: EN AW-6082 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.7-1.3

0.5

0.1

0.4-1.0

0.6-1.2

0.25

0.2

0.15

Rest

Mechanical Properties - EN 485-2: 2008 Temper

Thickness

Tensile strength Rm N/mm2

0.2% proof stress Rp 0.2 N/mm2

Elongation A50 mm A

mm

min.

max.

min.

% min.

T4

1.5-12.5

205

-

110

12-15

T6151

12.5-175

275

-

200

T651

12.5-175

275-295

-

230-240

T651

1.5-6

310

-

260

Brinell足 hardness HBS

% min. 58 8-12

81

4-8

83-89

6-10

91-94 For more information see page 56

Special Characteristics: Corrosion resistance Good

Suitability for anodizing

Weldability

Good

Excellent

High tensile strength Particularly used in engineering and tooling industries for construction of moulds etc.

14


Aluminium Sheets/Plates - EN AW-6082 T6/T651 EN 573-3, 485-1, 485-2, 485-3, 485-4

Thickness Kg/pcs. 1-6 x 1000 x 2000 mm 8-20 x 1020 x 2020 mm mm

Kg/ pcs.

2-6 x 1500 x 3000 mm 8-150 x 1520 x 3020 mm

1.0

5.4

1.5

8.1

2.0

10.8

2.5

13.5

3.0

16,2

4.0

21.6

5.0

27.0

61.0

6.0

32.4

72.9

8.0

44.5

99.4

10.0

55.7

124.2

12.0

66.8

149.1

15.0

83.5

186.3

20.0

111.3

248.4

25.0

310.5

30.0

372.6

35.0

460.0

*•

40.0

496.0

45.0

557.7

*•

50.0

621.0

60.0

746.0

65.0

806.0

*•

70.0

868.0

80.0

994.0

90.0

1116.0

*•

100.0

1245.0

110.0

1364.0

120.0

1488.0

130.0

1612.0

140.0

1736.0

150.0

1859.0

* Price is dimension dependent. All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil. All stated weights are theoretical weights, which may vary.

Aluminium Plates - EN AW 6082 T651 “Special Flatness” EN 573-3, 485-1, 485-2, 485-3 Thickness Kg/pcs. mm

1520 x 3020 mm

“Special Flatness”

8.0

97.2

• Extra straightened plates

10.0

124.2

• Better planeness

12.0

149.1

15.0

186.3

• Tension annealed

20.0

248.4

• Less tensions

25.0

310.5

• Superior surface

30.0

372.6

• Superior thickness tolerance

Max. 0.15 mm per 100 mm

• Also supplied cut to length

15


Aluminium Sheets/Plates

Chemical Composition: EN AW-7075 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.4

0.5

1.2-2.0

0.3

2.1-2.9

0.18-0.28

5.1-6.1

0.15

Rest

Mechanical Properties - EN 485-2: 2008 Temper

Thickness

Tensile strength Rm N/mm2

0.2% proof stress Rp 0.2 N/mm2

Elongation A50 mm A

Brinell足 hardness HBS

mm

min.

max.

min.

% min.

T651

1.5-12.5

540-545

-

460-475

7-8

T651

12.5-50.0

530-540

-

460-470

5-6

158-161

T651

90-100

460

-

360

3

135

T651

100-120

410

-

300

2

119

T651

120-150

360

-

260

2

104

% min. 160-163

For more information see page 56

Special Characteristics: Corrosion resistance

Suitability for anodizing

Weldability

Acceptable

Protective anodizing

Acceptable

High tensile strength Particularly used in engineering and tooling industries for construction of moulds etc.

Chemical Composition: HOKOTOL Cu

Mg

Zn

Al

2.1

2.0

6.2

Rest

Mechanical Properties: Tensile stregth Rm N/mm2 min. max. 550

0.2% proof stress Rp 0.2 N/mm2

Elongation A50 mm A

Brinell足 hardness HBS

min.

max.

% min.

% max.

500

-

4

-

160-180

Special Characteristics: Corrosion resistance

Suitability for anodizing

Weldability

Acceptable

Protective anodizing

Acceptable

Hardness consistency, also in the centre of the plate. Extremely high tensile strength, wear-resistant and forged. Particularly applicable in the tooling industry, for construction of moulds etc. We can also offer: Sheets/plates, rings and roundels cut to length, also in small quantities.

16


Aluminium Sheets/Plates - EN AW-7075 EN 573-3, 485-1, 485-2, 485-3 Thickness Kg/ mm pcs.

1000 x Thickness Kg/pcs. 1520 x Thickness Kg/pcs. 1520 x Thickness Kg/pcs. 1520 x 2000 mm 3020 mm 3020 mm 3020 mm mm mm mm

1.0

5.6

*•

8.0

102.8

*•

40.0

524.4

*•

180.0

2397.0

*•

2.0

11.4

*•

10.0

131.1

*•

50.0

656.0

*•

200.0

2664.0

*•

3.0

16.5

*•

12.0

157.4

*•

60.0

787.0

*•

220.0

2929.0

*•

15.0

196.7

*•

70.0

918.0

*•

20.0

262.2

*•

80.0

1047.0

*•

25.0

327.8

*•

120.0

1598.0

*•

30.0

393.3

*•

150.0

1997.0

*•

35.0

459.9

*•

160.0

2130.0

*•

All sheets/plates can be supplied up to and including 400 mm thickness, but we recommend HOKOTOL thicker than 80 mm. * Price is dimension dependent.

Typical 0,2 % proof stress

Hardness across a 300 mm (12”) thick plate 180

500

Hardness HB 2,5/187,5

Rp0,2 (LT,s/2) [MPa]

600 HOKOTOL

400 300

7075 T651

200 0 0

50

100 4

150

200

250

8 Plate thickness

300

350

12

HOKOTOL

160 140 120

7075 T651

100 80

[mm]

0

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9

[ins.]

1

Thickness position

Aluminium Plates - HOKOTOL

Tooling plates as alternative to tooling steel. EN 485-3 Thickness Kg/pcs. mm

790 x 2200 mm

Kg/pcs.

1270 x Kg/pcs. 2520 mm

1520 x 3020 mm

40.0

524.0

51.0

668.0

65.0

851.0

75.0

989.0

85.0

1112.0

90.0

1178.0

100.0

1309.0

110.0

1439.0

120.0

1570.0

130.0

1701.0

140.0

1832.0

150.0

1963.0

160.0

1449.0

180.0

1603.3

200.0

984.0

All stated weights are theoretical weights, which may vary. Can be supplied up to 400 mm thickness.

Other dimensions available on inquiry.

17


Aluminium Sheets/Plates

Chemical Composition: EN AC-5083 cast block, sawn on 6 sides Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Others

Al

0.4

0.4

0.10

0.4-1.0

4.0-4.9

0.05-0.25

0.25

0.15

0.15

Rest

Mechanical Properties: Tensile strength Rm N/mm2

0.2% proof stress Rp 0.2 N/mm2

220 - 290

Elongation A50 mm A

min.

% min.

110 - 115

10 - 15

Brinell足 hardness HBS

% min. ca. 70 - 75

Special Characteristics: Corrosion resistance

Suitability for anodizing

Weldability

Very good

Good

Very good

18


Aluminium Plates: EN AC-5083 cast block, sawn on 6 sides Naturally aged, homogenized and stress free Thickness mm

Kg/pcs.

1020 x 3100 mm

Thickness mm

Kg/pcs.

1020 x 3100 mm

30

260.9

110

956.6

40

347.8

120

1043.5

50

435.0

130

1130.5

60

521.8

140

1217.4

70

608.7

150

1304.4

80

695.7

160

1391.3

90

782.6

200

1739.1

We can supply all thicknesses from 10-1000 mm from our stock in Augsburg, Germany. Characteristics • Very good machining properties • Easy to mill • Good corrosion resistance • Minimum porosity

Fields of application • Moulds • Machine construction • Auto parts

• Minimum internal stress

Sawing of thick plates - Alumeco Deutschland GmbH.

19


Aluminium Sheets/Plates

Chemical Composition: Cast Aluminium Plates - EN AC-5083 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.4

0.4

0.1

0.4-1.0

4.0-4.9

0.05-0.25

0.25

0.15

Rest

Mechanical Properties - EN 485-2: 2008 Tensile strength Rm N/mm2 min. norm 275

0.2% proof stress Rp 0.2 N/mm2 min.

Elongation A50 mm A

norm

% min.

125

15

Brinell­ hardness HBS

% max. 70

Special Characteristics: • Excellent dimensional stability during machining • High mechanical properties • Minimal porosity • Excellent for anodizing (hard) • Fully machinable • Fully weldable • Roughness of Ra 0.4 microns • Excellent corrosion resistance • Good mechanical properties at elevated temperatures

20

Tolerances Thickness:

± 0.1 mm

Flatness:

< 12 mm

0.4 mm/m

Flatness:

> 12 mm

0.13 mm/m


Cast Aluminium Plates - EN AC-5083

Surface: Precision milled on both sides, with protective foil. Thickness mm 6.35

Kg/pcs. 1240 x 3048 mm Kg/pcs. 1520 x 3020 mm Kg/pcs. 1540 x 3048 mm 64.8

8.00

101.4

60.00

760.4

80.00

1013.9

10.00

124.0

12.00

148.8

15.00

185.9

20.00

247.9

25.00

309.9

30.00

371.8

35.00

433.8

40.00

495.8

50.00

619.7

21


Aluminium Sheets/Plates

Chemical Composition: "Weldural" Si

Fe

Cu

Mn

Mg

Cr

Zn

Zr

Ti

Al

0.30

0.4

5.8-6.8

0.2-0.4

0.1

0.05

0.1

0.1-0.25

0.1

Rest

Mechanical Properties: Thickness mm

Tensile strength Rm N/mm2

0.2% proof stress Rp 0.2 N/mm2

min.

min.

norm.

Elongation A50 mm A

Brinell足 hardness HBS

norm.

% min.

100.0

455

350

7.5

% max. 130

200.0

440

335

6.5

130

300.0

405

320

3.5

130

400.0

365

305

2.5

130

500.0

345

295

1.5

130

600.0

395

315

3.5

130

700.0

395

315

3.5

130

Special Characteristics: Corrosion resistance

Suitability for anodizing

Weldability

Acceptable

Protective anodising

Very good

Chemical Composition: EN AW-2017A - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.2-0.8

0.7

3.5-4.5

0.4-1.0

0.4-1.0

0.1

0.25

0.15

Rest

Mechanical Properties - EN 485-2: 2008 Temper

Thickness

Tensile strength Rm N/mm2

mm

min.

T451 T451 T451 T451 T451

1.5 - 6.0 6.0 - 12.5 12.5 - 40.0 40.0 - 60.0 60.0 - 80.0

390 390 390 385 370

max.

0.2% proof stress Elongation Rp 0.2 N/mm2 A50 mm A min.

% min.

245 260 250 245 240

15 13

% min.

12 12 7

Special Characteristics: Corrosion resistance

Suitability for anodizing

Weldability

Acceptable

Protective anodising

Acceptable

22

Brinell足 hardness

110 111 110 108


Aluminium Plates - “Weldural”

Tooling plates as alternative to tooling steel. Thickness Kg/pcs. 1650 x 3020 mm Thickness Kg/pcs. 1500 x 3020 mm mm mm 80.0

1156.0

250.0

3285.0

100.0

1445.0

280.0

3679.0

120.0

1734.0

300.0

3941.0

140.0

2023.0

320.0

4204.0

150.0

2168.0

350.0

4598.0

160.0

2312.0

400.0

5255.0

180.0

2601.0

450.0

5911.0

200.0

2896.0

500.0

6570.0

220.0

3179.0

Aluminium Plates - EN AW-2017A EN 573-3, 485-1, 485-2, 485-3, 485-4 Thickness mm

Kg/pcs.

1520 x 3020 mm

5.0

64.3

6.0

77.2

8.0

102.9

10.0

128.6

12.0

154.3

15.0

192.8

20.0

257.1

25.0

321.4

30.0

385.6

50.0

643.0

60.0

772.0

70.0

900.0

80.0

1029.0

90.0

1157.0

100.0

1286.0

23


Alloy overview

Wide selection of alloys

The table below sums up a number of the alloys and corresponding thickness directly available from Denmark or Germany.

Thickness

EN AW-5754

EN AW-5083

EN AW-6082

EN AW-

EN AW-7075

Weldural

Hokotol

2017A mm

DE

DK

1

2

3

4

5

DE

DK

DE

DK

DE

EN AC-5083

EN AC-5083

precision milled DE

DK

DE

DE

DK

DE

DK

sawn DE

DK •

6

8

10

12

15

20

25

30

35

40

• •

45 50

• •

51

• •

• •

55 60

65 •

75

90

100

• •

• •

• •

80

• •

70

• •

85

• •

110 120

• •

• •

• •

130

140

150

160

180

200

220

• •

• •

250

280

300

320

350

400

450

500

Standard rolled plate dimensions

• •

Max. dimensions of cast blocks

Thickness

Max. width

Max. length

610 mm x 1350 mm x 3100 mm

6 - 150 mm

1520 mm

3020 mm

595 mm x 1100 mm x 3100 mm

150 - 520 mm

1520 mm

2800/3020 mm

1000 x 1650 x 1800 mm

24


Special alloys

Cast aluminium – 5083 alloy Our cast aluminium is available sawn on six sides. Characteristics: • Easy to mill • Minimum porosity • No rolling structure • Internal stress is reduced to the absolute minimum to obtain extreme precision, also after machining

Cast and precision milled – 5083 alloy The precision-milled EN AC-5083 plates have the following additional advantages:

• Flatness tolerances to a minimum of

0.13 mm/metre ≥15 mm thick

Mould for car headrest (made by W. Olsen)

• Thickness tolerances of +/- 0.127 mm

• Roughness: Ra 0.64 my

• Foil on both sides

Hokotol – 7000 alloy Fields of application:

Precision part in 5083

• Moulds for blow forming and injection

moulding for the plastics industry

• Punching tools

• Machine parts requiring high strength combi-

ned with low weight

• Moulds for casting plastic window frames

Characteristics:

Weldural – 2219 alloy

• Lightweight

Fields of application:

• Easy to mill • Precision parts for the machine industry due to • Extremely uniform mechanical properties high dimensional stability throughout the entire thickness of the plate • Machine parts • Resistant to wear • Moulds

• Suitable for high temperatures • Refrigeration engineering Characteristics:

• Good polishing properties

• Excellent dimensional stability by stress relieved

stretching or cold compressing

• Good thermal conductivity

• High strength under heat stress • Medium and high strength • Resistant to wear • Excellent weldability • Good polishing properties • Good corrosion resistance • Extremely uniform mechanical properties throughout the entire thickness of the plate • Excellent dimensional stability by stress relieved stretching or cold compressing • Good thermal conductivity Blow mould tank in Weldural

25


Aluminium Sheets/Plates

Chemical Composition: ENâ&#x20AC;&#x2C6;AW-5005 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.3

0.7

0.20

0.20

0.5-1.1

0.10

0.25

0.15

Rest

Mechanical Properties - EN 485-2: 2008 Temper

Thickness

Tensile strength Rm N/mm2

0.2% proof stress Rp 0.2 N/mm2

Elongation A50 mm A

mm

min.

max.

min.

% min.

H14

0.2-1.5

145

185

120

2

H24/H34

0.5-6

145

185

110

4-6

Brinell­ hardness HBS

% min. 48 47 For more information see page 56

Special Characteristics: Corrosion resistance Good

Suitability for anodizing

Weldability

Vey good

Good

Specially suited for decorative anodizing

26


Aluminium Sheets - Guaranteed Anodizing Quality - EN AW-5005 1 side covered with PE-foil. EN 573-3, 485-1, 485-2, 485-4 Thickness mm

Kg/pcs.

1000 x 2000 mm

Kg/pcs.

1.0

5.4

1.5

8.1

12.7

2.0

10.8

17.0

2.5

13.5

3.0

16.2

1250 x 2500 mm

Kg/pcs.

1500 x 3000 mm

18.3

24.3

21.1

30.5

25.3

36.6

Kg/pcs.

2000 x 4000 mm

43.2

Aluminium Sheets - EN AW-5005

EN 573-3, 485-1, 485-2, 485-4 Nature with 15-20 microns, 1 side covered with PE-foil.

Natureanodized

Thickness mm

Kg/pcs.

1000 x 2000 mm

Kg/pcs.

1250 x 2500 mm

Kg/pcs.

1500 x 3000 mm

1.0

5.4

8.5

12.2

*1.5

8.1

12.7

18.3

*2.0

10.8

17.0

24.3

2.5

13.5

3.0

16.2

36.6

B2

B3

Kg/pcs.

1500 x 4000 mm

24.4

*B2 and B3 bronze anodized available with 15-20 microns, 1 side covered with PE-foil.

Aluminium Sheets - EN AW-3003 H 45

EN 573-3, 485-1, 485-2, 485-4 White RAL 9010, 1 side covered with PE-foil. Powder coated, gloss 80. Backside 5 microns with transparent coat. Thickness mm

Kg/pcs.

1000 x 2000 mm

0.9

Kg/pcs.

1250 x 2500 mm

7.6

1)•

1.0 1.5

8.1

*•

12.7

2.0 1) Also available in RAL 9005 black PVDF. * Coated on both sides. All sheets can be supplied covered with PE-foil - 2 sides.

*•

RAL 9010

Kg/pcs.

1500 x 3000 mm

12.2

18.3

24.3

Other RAL-colours and sizes are available. Time of delivery: approx. 2 weeks

All stated weights are theoretical weights, which may vary.

T

The sheets are pliable. Radius = 2 x thickness. Temperature = > 15° C.

Drip cap

27


Aluminium Sheets/Plates

Painted sheets for signs Material:

Signal red (APP317) NCS 1977-Y90R next to average standard NCS 2080-Y90R.

• Aluminium alloy EN AW-3003 H44 • Pliable • Mechanical Properties: 0.2% proff stress = 160-200 MPa. Tensile strength = 180-220 MPa. Elongation A5, % min. = 8 Very corrosion-resistant alloy

Signal blue (APP618) NCS 3062-R90B next to average standard NCS 3070G-R90B.

Paint: • Wind/weather-resistant polyester paint • High gloss 90% Gardner, white 70% • Screen printable, and suitable for painting • With protective foil

Signal yellow (APP408) NCS 0871-G99Y next to average standard NCS 0070-Y.

Aluminium sheets, painted Dimension

Kg/pcs.

1.6 x 1250 x 2500

13.5

Signal red Signal blue Signal yellow Signal green

Aluminium sheets, painted NCS 0500 white

Signal green (APP520) NCS 3260-G10Y next to average standard NCS 3060G.

White NCS 0500.

Dimension

Kg/pcs.

Dimension

Kg/pcs.

0.7 x 1250 x 2000

4.8

1.5 x 1250 x 2500

12.7

0.8 x 1250 x 2000

5.4

1.5 x 1500 x 3000

18.3

1.0 x 1250 x 2500

8.5

1.8 x 1250 x 2500

15.2

1.5 x 1000 x 2000

8.1

1.8 x 1500 x 3000

21.9

White NCS 0502Y.

Aluminium sheets, painted NCS 0502Y white Dimension

Kg/pcs.

1.0 x 1250 x 2500

8.5

1.5 x 1000 x 2000

8.1

1.5 x 1250 x 2500

12.7

1.5 x 1500 x 3000

18.3

1.8 x 1000 x 2000

9.8

1.8 x 1250 x 2500

15.2

28

For technical reasons, the colour samples above can vary from the colour of the painted sheets. Please ask for colour samples.


Coated sheets

Overview of coating types Coated aluminium sheets are most often used in the building, sign and insulation sectors. In general there are two types of coated aluminium sheets: liquid painted and powder painted. Below is an overview of the two types and their characteristics:

Definition

Liquid painting Liquid paint is applied to the sheet with a roller and is then heat dried to harden the paint.

Types Polyester Polyurethane Polyamide PVDF

Advantages • Excellent resistance to abra­ sion and knocks (Polyamide)

Disadvantages • Bad chemical resistance (Polyrethane)

• Resistant to chemical, mechanical and corrosive effects (PVDF) • Excellent elasticity (PVDF) • Good chemical resistance (Polyamide) • Good coating elasticity • Good resistance to UV (Polyamide) • PVDF has 24+ years life expectancy

Powder painting The sheet is coated with a thermoset layer of powder. The paint is then hardened by heattreating the sheet.

Thermoplastic Polyethylene Polypropylene Vinyl Polyamide Polyester

• High material exploitation • Bad resistance to weather during production – no evap­ (Polyethylene, epoxy) oration • Bad resistance to UV • Easy to apply thicker layer (Polyester) • Excellent resistance to abra­ sion and knocks (Polyamide)

• Bad resistance to weather (Polyester)

• Resistant to chemical effects (Polyethylene, vinyl)

• Wastage during production in the form of evaporation if there is over-spraying

• Good adherence (polyester) Thermosetting Epoxy Polyester Epoxy-polyester (mix)

• Good resistance to weather (polyester, vinyl) • High corrosion stability • Good coating elasticity • Good formability • Good mechanical features (Epoxy) • Easy to apply finer thickeness • Sheets can be scored without the paint cracking • Polyester has 16 years life expectancy

NB: When ordering coated sheets it is a good idea to order the entire load in one go to avoid slight differences in colour as a result of further orders being filled from different batches.

Alloys and maintenance When using coated sheets in construction, Alumeco A/S recommends using sheets made of aluminium alloy EN AW-5754 as this has corrosion resistance properties. The use of other alloys invalidates the guarantee. The sheet surface should be maintained by being cleaned at least once a year to uphold the guarantee for the mate­ rial supplied.

29


Aluminium Tread Plates / Barely Seed Plates / Gangway Profiles

Chemical Composition: EN AW-5754 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.4

0.4

0.1

0.5

2.6-3.6

0.3

0.2

0.15

Rest

Mechanical Properties: Temper

Thickness

Tensile strength Rm N/mm2

0.2% proof stress Elongation Rp 0.2 N/mm2 A50 mm A

mm

min.

max.

min.

% min.

1.5-3

240

310

100

8

H114

3-20

240

310

100

10-13

H244

1.5-3

300

360

220

2

H114

Brinell足 hardness HBS

% min. 60 16

60

For more information see page 56

We can also supply:

One bar

30

(Not in stock)

Quintet

Barely Seed

Duet

Gangway profiles

Example of application

(Not in stock)


Aluminium Tread Plates Quintet - Sea water-resistant EN AW-5754 H114 - EN AW 5086-H244 EN 573-3. 1386 Size mm

Kg/ pcs.

Thickness 2/4 mm

1000 x 2000

13.0

1250 x 2500

20.0

Kg/ pcs.

Thickness 3/4 mm

Kg/ pcs.

Thickness 3/5 mm

Kg/ pcs.

18.0

30.0

29.0

47.0

34.0

57.0

1250 x 3000 1500 x 3000

29.0

2000 x 4000 2500 x 7000

160.0

** •

2500 x 8000

183.0

** •

Thickness 5/7 mm

Kg/ pcs.

Thickness 7/9 mm

40.0

63.0

90.0

41.0

67.5

*•

72.0

*•

120.0

*•

* Price is dimension dependent. ** Primed on the back of the plate.

All stated weights are theoretical weights, which may vary.

Aluminium Barely Seed Plates - Sea water-resistant EN AW-5754 H244 - EN AW 5086 H244 EN 573-3, 1386 Thickness Kg/pcs. mm

1250 x 2500 mm

1.5/2

14.7

2/2.5

19.0

2.5/3

23.0

Kg/pcs.

2500 x 8000 mm

Kg/pcs.

2500 x 9000 mm

183.0

** •

206.0

** •

3/3.5 ** Primed on the back of the plate.

Aluminium Gangway Profile - Sea water-resistant - Anti-slip surface EN AW-6060 EN 755 - 1, 755-2, 755-9 Extremely suitable for gangways, stairs etc. Can be supplied cut to length subject to inquiry. Profile Kg/m no. P 12234

3.93

Size 250 x 40 mm

Ix-value Wx-value mm 4 mm 3 294020

250

11585

Profile Kg/m no. P 16062

4.38

Size 250 x 60 mm

Ix-value Wx-value mm 4 mm 3 891900

40

3

P 12234

25

250

23380

2,8

Not in stock.

60 3

P 16062

Profile Kg/m no. P 13694

3.83

Size 300 x 35 mm

Ix-value Wx-value mm 4 mm 3 21500

35

4

25

300

8244

35

3

P 13694

25

31


Aluminium Bars - Round

Chemical Composition: EN AW-6060 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.30-0.6

0.10-0.30

0.10

0.10

0.35-0.6

0.05

0.15

0.15

Rest

Special Characteristics: Extremely suitable for anodizing, good weldability.

Chemical Composition: EN AW-6082 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.7-1.3

0.5

0.1

0.4-1.0

0.6-1.2

0.25

0.2

0.15

Rest

Special Characteristics: High corrosion resistance, good weldability, high strength, suitable for anodizing.

Chemical Composition: EN AW-2007 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Ni

Zn

0.4-0.8

0.8

3.3-4.6

0.5-1.0

0.4-1.8

0.1

0.2

0.2

Bi 0.2

Sn

Pb

Others

Al

0.2

0.8-1.5

0.30

Rest

Special Characteristics: Short-chipped - suitable for machining.

Chemical Composition: EN AW-6026 - EN 573-3: 2009 Si

Fe

Cu

0.6-1.4 0.7 0.2-0.5 Special Characteristics:

Mn

Mg

Cr

Zn

Ti

Bi

Pb

Others

Al

0.2-1.0

0.2-1.2

<0.3

<0.3

<0.2

0.5-1.5

<0.4

0.15

Rest

Short-chipped, high corrosion resistance, high strength, suitable for anodizing. To obtain optimal surface when anodizing, it is recommended to turn min. 0.5 mm up to ø28 mm and 1 mm above that.

Chemical Composition: EN AW-2011 - EN 573-3: 2009 Fe

Pb

Cu

Mn

Mg

Cr

Ni

Zn

0,8

0,8-1,5

3,3-4,6

0,5-1,0

0,4-1,8

0,1

0,2

0,2

Bi

Sn 0,2

0,2

Others

Al

0,30

Rest

Special Characteristics: Short-chipped, suitable for machining, polished surface, can be protectively anodized.

Chemical Composition: EN AW-2014 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Others

Al

0.5-1.2

0.7

3.9-5.0

0.4-1.2

0.2-0.8

0.1

0.25

0.15

0.15

Rest

Special Characteristics: Short-chipped, suitable for machining, high strength.

Chemical Composition: EN AW-7075 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Others

Al

0.4

0.5

1.2-2.0

0.3

2.1-2.9

0.18-0.28

5.1-6.1

0.2

0.15

Rest

Special Characteristics: Suitable for machining, very high strength.

EN AW - 6082

32

EN AW - 2007

EN AW - 6026

EN AW - 2011


Aluminium Bars - Round

EN 573-3, 754-1, 754-2, 754-3, 755-1, 755-2, 755-3 Diameter Kg/m EN AW-2007 EN AW-2011 EN AW-2014 EN AW-6026 EN AW-6060 EN AW-6082 EN AW-5083 EN AW-5754 EN AW-7075 (cut and drill­ (cut and drill­ (cut and drill­ (Corrosion (Corrosion mm ing quality)

3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 28 30 32 33 34 35 36 38 40 42 45 46 48 50 55 60 65 70

0.02 0.04 0.06 0.08 0.11 0.15 0.19 0.22 0.33 0.38 0.44 0.50 0.58 0.65 0.73 0.81 0.89 1.00 1.08 1.19 1.29 1.38 1.51 1.76 1.98 2.29 2.44 2.59 2.79 2.90 3.23 3.60 3.95 4.60 4.74 5.16 5.50 6.80 8.05 9.47 10.70

ing quality)

ing quality)

resistance)

resistance)

Length:

Length:

Length:

Length:

Length:

Length:

Length:

Length:

Length:

3000 mm

3000 mm

3000 mm

3000 mm

6000 mm

3000-6000 mm

3000 mm

3000 mm

3000 mm

• •

1)

• •

1)

1)

1)

1)

2)

1)

1) 2)

1) 2)

• 2) • 1) 2) • 2) • 1) 2) •

1) 2)

• 1) 2) • 1) 2) • 1) 2) • 2) • 2)

* • 1) • 1) * • 1) • 1) * • 1) • 1) • 1) * • 1) * • 1) • 1) * • 1) * • 1) * • 1) * • 1) • 1) •

*• * • 1) * • 1) • 1) * • 1) • 1) • 1) • 1) • 1) 2) * • 1) 2) * • 1) 2) • 2) * • 2) 1)

*• * • 1) * • 1) • 1)

*•

1)

*• *•

1)

* • 1) • 1) * • 1) * • 1) • 1)

*• *•

1)

*•

*• 1)

1)

1) 2)

1)

* • 1) • 1) * • 1) • 1) • 1) * • 1) * • 1)

*•

1)

* * * *

1)

1)

1)

1)

1)

• • • • •

1) 2) 2) 2) 2)

1)

1)

• 1) 2) • 2)

*•

1)

*•

*•

1)

*•

1)

2)

1) 2)

*•

1) 1) 1) 1)

1)

• 1) 2) • 2)

1)

• 1) • 1) * • 1) * • 1) • 1) • 1) 2) • •

1)

• • • •

*•

1)

*• *•

1)

*•

1)

*•

1)

*•

2)

1) 2)

*•

2)

1)

1)

1) 2)

*•

2)

1) 2)

• 2) • 1) 2) • 2)

*•

2)

1) 2)

1) 1)

• 1) • 1) 2) • 1) • 1)

• 1) 2) • 1) 2) • 1) 2) • 2) • 2)

*Price is dimension dependent. 1)Drawn 2)Extruded 3)Cast (EN AC-) For bars over 60 mm in diameter the length is 3000 mm for alloy EN AW-6082.

• 2) • 2) * • 2) • 2)

• • • • •

*•

2)

2)

*•

2)

*•

2)

2) 2) 2) 2)

*• *• *•

2) 2) 2)

1) 2)

• 1) 2) * • 1) 2) • 1) 2)

*• *•

2) 2)

• 1) 2) * • 1) 2) • 2) * • 2) • 2)

All stated weights are theoretical weights, which may vary. Bars are supplied drawn, extruded or cast. More information on page 34.

Please also ask for these alloys: EN AW-2017. And cut and drilling quality without lead.

33


Aluminium Bars - Round / Square / Hexagonal

Aluminium Bars - Round EN 573-3, 755-1, 755-2, 755-3

Diameter Kg/m EN AW-2007 EN AW-2011 (cut and drilling (cut and drill­ mm quality)

75 80 85 90 95 100 105 110 115 120 125 130 140 145 150 160 165 170 175 180 190 200 210 220 230 240 250 260 270 280 300 305 310 320 330 350 360 380 400 410 430 450 480 500

12.60 14.20 16.20 18.10 20.20 22.40 24.70 27.10 29.60 32.10 35.00 37.50 43.80 47.20 50.10 57.10 60.90 64.70 67.30 72.50 81.30 89.50 98.70 108.40 118.40 128.90 136.60 151.40 157.20 175.60 202.00 208.12 215.00 229.00 244.00 274.00 290.00 323.00 358.00 376.00 414.00 453.00 515.00 560.00

ing quality)

EN AW-2014 (cut and drill­ ing quality)

EN AW-6026 (cut and drill­ ing quality)

(Corrosion resistance)

(Corrosion resistance)

Length:

Length:

Length:

Length:

Length:

Length:

Length:

Length:

3000 mm

3000 mm

3000 mm

3000 mm

3000 mm

3000 mm

3000 mm

3000 mm

• 2) • 2) • 2) • 2) • 2) • 2) * • 2) • 2) • 2) • 2) * • 2) • 2) • 2)

• 2) • 2) • 2) • 2) • 2) • 2) * • 2) • 2) * • 2) • 2) * • 2) • 2) • 2)

* * * * * * * * * * * * *

• • • • • • • • • • • • •

2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2)

* • 2) * • 2) 3) *•

* * * * * * * * * * * * *

• • • • • • • • • • • • •

2)

*• *•

2)

2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2)

2)

2) 3)

*•

2)

* • 2) 3) * • 2) 3) * • 2) 3) * • 2) 3) * • 2) 3) * • 3) * • 2) 3) * • 2) 3) * • 2) 3) • 2) 3) * • 2) 3) * • 2) 3)

*•

2)

*•

• •

2) 2)

• • •

2)

* • 3) * • 2) 3) * • 2) 3) * • 3) * • 3) * • 2) 3)

*•

3)

*Price is dimension dependent. 1)Drawn 2)Extruded 3)Cast (EN AC-) For bars over 60 mm in diameter the length is 3000 mm for alloy EN AW-6082.

34

EN AW-6082 EN AW-5083 EN AW-5754 EN AW-7075

2) 2) 2)

2)

• 2) * • 2) • 2) * • 2) * • 2) • 2) * • 2) • 2) • 2) * • 2) • 2) * • 2) 3) • 2) 3) * • 2) 3) • 2) 3) * • 2) 3) * • 2) * • 2) * • 2) * • 2) * • 2) 3) * • 2) 3) * • 2) 3) * • 2) 3)

*•

2) 3)

*•

* * * * * *

• • • • • •

2)

*•

2)

*•

2)

*• *•

2)

*• *•

2)

2)

*•

2)

*•

2)

*•

2)

2) 2) 2) 2)

* • 2) • 2) * • 2) * • 2) * • 2) • 2) * • 2) * • 2) * • 2) * • 2) *• *•

2)

*•

2)

2)

• • • • •

*•

2)

*•

2)

*•

2)

2) 2)

2)

* • 2) • 2) *•

* * * * *

2)

2)

* • 2) * • 2) • 2)

2) 2)

2)

* * * * *

• • • • •

2)

*• *•

2)

*•

2)

* * * * * * *

2)

• • • • • • •

2) 2) 2) 2)

2)

2) 2) 2) 2) 2) 2)

3)

Please also ask for these alloys: EN AW-2017, EN AW-2024. And cut and drilling quality without lead.


Aluminium Bars - Square

EN 573-3, 754-1, 754-2, 754-4, 755-1, 755-2, 755-4 mm

Kg/m

8 10 12 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120 130 135 140 150 160 165 170 180 200 220

EN AW-2007

EN AW-2011

(cut and drilling quality)

(cut and drilling quality)

Length: 3000 mm

Length: 3000 mm

0.18 0.27 0.39 0.61 1.08 1.69 2.52 3.33 4.48 5.47 6.80 8.20 9.72 11.80 13.23 15.47 17.30 20.30 22.96 24.50 27.00 33.00 39.00 47.30 49.21 54.90 63.00 69.90 77.60 82.37 90.70 112.00 131.00

• 1) * • 1)

*• *• *• * * * * *

• • • • •

* * * * * *

2) 2) 2)

2)

EN AW-6026 (cut and drilling quality)

Length: 3000 mm

• • • • • •

1)

*•

2)

1) 2)

*• *• *•

2)

1) 2)

1)

EN AW6060/6063

EN AW-6082

Length: 6000 mm * • 2)

Length: 3000-6000 mm

* * * *

1)

1) 1) 1) 1)

• • • •

2) 2) 2) 2)

• * • 1) • 1) 2) 1)

2) 2) 2) 2)

2)

*•

2)

*•

2)

*•

2)

*•

2)

*•

2)

2)

*•

2)

*•

2)

2)

2)

2)

• 2) * • 2)

• 2) • 2) • 2) • 2) • 2) • 2) • 2) • 2) • 2) • 2) * • 2) • 2) * • 2) • 2) * • 2) • 2) • 2) • 2) * • 2) • 2) • 2) * • 2) • 2) * • 2) * • 2) • 2) * • 2) * • 2) * • 2) * • 2) * • 2) * • 2)

* Price is dimension dependent. 1)Drawn 2)Extruded For bars over 60 mm the length is 3000 mm for alloy EN AW-6082.

Aluminium Bars - Hexagonal

EN 573-3, 754-1, 754-2, 754-6, 755-1, 755-2, 755-6 mm

Kg/m

EN AW-2011

EN AW-6026

(cut and drilling quality)

(cut and drilling quality)

Length: 3000 mm

Length: 3000 mm

8

0.16

10

0.25

*•

14

0.48

*•

17

0.72

*•

19

0.89

*•

22

1.20

*•

27

1.80

*•

* Price is dimension dependent.

*• *• *• All stated weights are theoretical weights, which may vary.

35


Aluminium Profiles - Flat

Aluminium Profiles ENâ&#x20AC;&#x2C6;AW-6060 T6 - ENâ&#x20AC;&#x2C6;AW-6082 T6

Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-5 WXH mm

kg/m

* 10 x 2 10 x 3 * 10 x 4 * 10 x 5 * 10 x 8 * 12 x 3 * 12 x 4 * 12 x 8 * 15 x 2 15 x 3 15 x 4 * 15 x 5 * 15 x 6 * 15 x 8 * 15 x 10 * 20 x 2 20 x 3 * 20 x 4 20 x 5 * 20 x 6 * 20 x 8 20 x 10 * 20 x 12 * 20 x 15 25 x 2 25 x 3 25 x 4 25 x 5 * 25 x 6 * 25 x 8 25 x 10 25 x 12 25 x 15 * 25 x 20 30 x 2 30 x 3 30 x 4 30 x 5 * 30 x 6 30 x 8 30 x 10 30 x 12 30 x 15 30 x 20 * 30 x 25 * 35 x 3 * 35 x 4

0.06 0.09 0.11 0.14 0.22 0.10 0.13 0.26 0.09 0.13 0.17 0.21 0.24 0.33 0.41 0.11 0.17 0.22 0.27 0.33 0.44 0.54 0.65 0.81 0.14 0.21 0.27 0.36 0.41 0.54 0.68 0.81 1.02 1.35 0.17 0.25 0.33 0.41 0.49 0.65 0.81 0.98 1.22 1.62 2.03 0.29 0.38

WXH mm 35 x 5 * 35 x 6 * 35 x 8 35 x 10 * 35 x 12 * 35 x 15 40 x 2 40 x 3 40 x 4 40 x 5 40 x 6 40 x 8 40 x 10 40 x 12 40 x 15 40 x 20 40 x 25 40 x 30 * 45 x 3 45 x 5 45 x 6 * 45 x 8 * 45 x 10 50 x 2 50 x 3 50 x 4 50 x 5 50 x 6 50 x 8 50 x 10 50 x 12 50 x 15 50 x 20 50 x 25 50 x 30 50 x 40 * 60 x 2 * 60 x 3 * 60 x 4 60 x 5 60 x 6 60 x 8 60 x 10 * 60 x 12 60 x 15 60 x 20 * 60 x 25

kg/m 0.48 0.60 0.76 0.95 1.14 1.42 0.22 0.33 0.44 0.54 0.65 0.87 1.08 1.30 1.62 2.16 2.71 3.24 0.36 0.61 0.73 0.97 1.22 0.27 0.41 0.54 0.68 0.81 1.08 1.35 1.62 2.05 2.70 3.38 4.05 5.40 0.32 0.49 0.65 0.81 0.98 1.20 1.62 1.95 2.43 3.24 4.08

WXH mm

kg/m

60 x 30 60 x 40 * 60 x 50 * 70 x 5 70 x 6 * 70 x 8 70 x 10 * 70 x 12 70 x 15 70 x 20 70 x 25 70 x 30 70 x 35 70 x 40 * 70 x 50 75 x 6 75 x 8 75 x 10 75 x 15 75 x 20 75 x 25 * 75 x 40 * 80 x 3 * 80 x 4 80 x 5 80 x 6 80 x 8 80 x 10 80 x 12 80 x 15 80 x 20 80 x 10 80 x 15 80 x 20 * 80 x 25 80 x 30 80 x 40 * 80 x 50 80 x 60 85 x 30 * 90 x 5 90 x 10 * 90 x 20 90 x 60 * 100 x 3 * 100 x 4 * 100 x 5

4.86 6.80 8.10 0.95 1.14 1.53 1.89 2.27 2.84 3.78 4.75 5.70 6.80 7.60 9.71 1.21 1.62 2.03 3.10 4.15 5.08 8.10 0.65 0.87 1.08 1.30 1.73 2.16 2.60 3.24 4.32 2.16 3.24 4.32 5.40 6.48 8.64 10.90 13.00 6.89 1.22 2.43 4.95 ?? 0.81 1.14 1.35

* Price is dimension dependent. Profiles with a thickness of more than 10 mm can be supplied in EN AW-6082. All stated weights are theoretical weights, which may vary.

More information on page 37.

We stock certain dimensions with DNV-certificate.

36


Aluminium Profiles EN AW-6060 T6 - EN AW-6082 T6

Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-5 WXH mm

kg/m

100 x 6 100 x 8 100 x 10 100 x 12 100 x 15 100 x 20 100 x 25 100 x 30 * 100 x 35 100 x 40 100 x 50 100 x 60 100 x 70 * 100 x 80 * 110 x 10 * 120 x 5 120 x 8 120 x 10 120 x 12 120 x 15 * 120 x 20

1.62 2.16 2.70 3.24 4.05 5.40 7.00 8.10 9.45 10.80 13.50 16.20 18.90 22.00 3.00 1.62 2.60 3.24 3.89 4.86 6.50

WXH mm * 120 x 25 * 120 x 30 * 120 x 50 * 120 x 60 * 120 x 70 * 120 x 80 * 125 x 10 * 125 x 12 * 125 x 15 125 x 40 130 x 50 * 134 x 35 * 140 x 20 * 140 x 30 * 140 x 40 * 150 x 5 * 150 x 8 150 x 10 150 x 12 150 x 15 150 x 20

kg/m

WXH mm

kg/m

8.40 9.72 16.20 19.50 23.10 26.00 3.38 4.05 5.10 13.50 17.55 12.91 7.70 11.40 15.20 2.02 3.24 4.05 4.86 6.08 8.10

* 150 x 25 150 x 30 * 160 x 20 * 165 x 65 180 x 15 180 x 20 * 180 x 50 200 x 10 200 x 12 200 x 15 200 x 20 200 x 25 * 200 x 30 200 x 40 * 200 x 50 * 200 x 60 220 x 30 * 310 x 20 * 310 x 90

10.13 12.15 8.64 28.96 7.29 9.80 24.50 5.40 6.48 8.10 10.80 13.50 16.20 21.90 27.00 32.40 17.82 16.74 75.33

*Price is dimension dependent. Profiles with a thickness of more than 10 mm can be supplied in EN AW-6082. All stated weights are theoretical weights, which may vary. Certain dimensions can also be supplied in alloy EN AW 6012/6026.

We stock certain dimensions with DNV-certificate.

Aluminium Profiles EN AW-2007

Manufacturing length 3000 mm EN 573-3, 755-1, 755-2, 755-5 WXH mm

kg/m

WXH mm

kg/m

WXH mm

kg/m

* 20 x 10 * 25 x 20 * 30 x 10 * 30 x 15 * 30 x 20 * 40 x 10 * 40 x 20 * 40 x 25 * 40 x 30 * 50 x 10

0.56 1.38 0.84 1.26 1.68 1.12 2.24 2.70 3.36 1.40

* 50 x 15 * 50 x 20 * 50 x 25 * 50 x 30 * 50 x 40 * 60 x 10 * 60 x 15 * 60 x 20 * 60 x 25 * 60 x 30

2.07 2.80 3.50 4.20 5.60 1.68 2.52 3.36 4.28 5.04

* 60 x 40 * 70 x 40 * 70 x 50 * 80 x 10 * 80 x 15 * 80 x 20 * 90 x 15 * 90 x 40 * 90 x 50 * 100 x 10 * 100 x 15

6.72 7.84 9.80 2.24 3.36 4.48 3.92 10.08 12.61 2.80 4.05

*Price is dimension dependent.

37


Aluminium Profiles - U / T

Aluminium Profiles - U - EN AW-6060 T6 Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-9 Even-sided mm WXHxWxT 10 x 10 x 10 x 1.5

kg/m

Uneven-sided mm WXHxWxT

kg/m

Uneven-sided mm WXHxWxT

kg/m

0.11

20 x 10 x 20 x 2

0.25

30 x 50 x 30 x 4

1.11

* 10 x 10 x 10 x 2

0.15

* 20 x 15 x 20 x 2

0.28

* 30 x 50 x 30 x 5

1.35

12 x 12 x 12 x 2

0.20

10 x 20 x 10 x 2

0.20

* 40 x 50 x 40 x 4

1.41

* 14 x 14 x 14 x 2

0.22

* 15 x 20 x 15 x 2

0.25

* 30 x 60 x 30 x 3

0.96

15 x 15 x 15 x 2

0.23

* 30 x 20 x 30 x 2

0.43

* 30 x 60 x 30 x 4

1.27

20 x 20 x 20 x 2

0.32

* 40 x 20 x 40 x 2

0.52

* 40 x 60 x 40 x 3

1.14

* 20 x 20 x 20 x 3

0.43

15 x 25 x 15 x 2

0.29

* 40 x 60 x 40 x 4

1.52

* 25 x 25 x 25 x 2

0.40

* 15 x 30 x 15 x 2

0.30

40 x 60 x 40 x 5

1.78

25 x 25 x 25 x 3

0.59

* 15 x 30 x 15 x 3

0.45

* 40 x 70 x 40 x 4

1.54

* 30 x 30 x 30 x 2

0.49

* 20 x 30 x 20 x 2

0.36

* 30 x 80 x 30 x 3

1.10

30 x 30 x 30 x 3

0.72

20 x 30 x 20 x 3

0.54

* 40 x 80 x 40 x 3

1.25

* 30 x 30 x 30 x 4

0.88

* 40 x 30 x 40 x 3

0.87

* 40 x 80 x 40 x 4

1.64

* 35 x 35 x 35 x 3

0.80

* 20 x 35 x 20 x 2

0.39

40 x 80 x 40 x 5

2.03

* 40 x 40 x 40 x 2

0.62

* 20 x 40 x 20 x 2

0.51

* 50 x 80 x 50 x 5

2.30

40 x 40 x 40 x 3

0.93

* 20 x 40 x 20 x 3

0.63

* 40 x 100 x 40 x 3

1.42

* 40 x 40 x 40 x 4

1.21

25 x 40 x 25 x 3

0.72

* 40 x 100 x 40 x 4

1.87

* 50 x 50 x 50 x 3

1.22

* 30 x 40 x 30 x 3

0.79

* 50 x 100 x 50 x 3

1.58

* 50 x 50 x 50 x 4

1.54

* 30 x 40 x 30 x 4

0.99

50 x 100 x 50 x 5

2.58

* 50 x 50 x 50 x 5

1.90

* 25 x 45 x 25 x 3

0.73

* 60 x 60 x 60 x 4

1.86

* 20 x 50 x 20 x 3

0.73

* 60 x 60 x 60 x 5

2.29

* 25 x 50 x 25 x 4

1.00

30 x 50 x 30 x 3

0.90

* 50 x 100 x 50 x 8 x 6 x 8 * 55 x 120 x 55 x 10

5.70

60 x 120 x 60 x 5

3.12

* 100 x 200 x 100 x 10

* Price is dimension dependent.

Aluminium T-profiles - EN AW-6060 T6 - EN AW-6082 T6 Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-9 Even-sided mm HxWxT

kg/m

Even-sided mm HxWxT

kg/m

Uneven-sided mm HxBxT

kg/m

20 x 20 x 2

0.21

* 50 x 50 x 3

0.79

* 50 x 30 x 5

1.02

* 25 x 25 x 2

0.26

* 50 x 50 x 4

1.04

* 100 x 50 x 6

2.34

* 25 x 25 x 3

0.39

50 x 50 x 5

1.27

30 x 30 x 3

0.47

* 60 x 60 x 4

1.30

* 40 x 40 x 3

0.63

60 x 60 x 6

1.90

40 x 40 x 4

0.82

80 x 80 x 8

3.35

* Price is dimension dependent.

38

3.53

10.30


Aluminium Profiles - Angle

Aluminium Profiles - ENâ&#x20AC;&#x2C6;AW-6060 T6 - EN AW-6082 T6 Manufacturing length 6000 mm. EN 573-3, 755-1, 755-2, 755-9 Even-sided mm WxHxT * 10 x 10 x 2 15 x 15 x 2 15 x 15 x 3 20 x 20 x 2 20 x 20 x 3 * 20 x 20 x 4 25 x 25 x 2 25 x 25 x 3 * 25 x 25 x 4 25 x 25 x 5 30 x 30 x 2 30 x 30 x 3 30 x 30 x 4 30 x 30 x 5 35 x 35 x 3 35 x 35 x 4 * 35 x 35 x 5 * 40 x 40 x 2 * 40 x 40 x 3 40 x 40 x 4 40 x 40 x 5 * 40 x 40 x 6 * 45 x 45 x 3 * 45 x 45 x 5 * 50 x 50 x 2 50 x 50 x 3 * 50 x 50 x 4 50 x 50 x 5 50 x 50 x 6 * 50 x 50 x 8 * 50 x 50 x 10 * 60 x 60 x 2 * 60 x 60 x 3 * 60 x 60 x 4 * 60 x 60 x 5 60 x 60 x 6 * 60 x 60 x 8 * 60 x 60 x 10 * 70 x 70 x 5 * 70 x 70 x 6 * 70 x 70 x 7 * 75 x 75 x 5 * 75 x 75 x 8 * 75 x 75 x 9 * 75 x 75 x 10 * 80 x 80 x 3 * 80 x 80 x 4 * 80 x 80 x 5 * 80 x 80 x 6 80 x 80 x 8 * 80 x 80 x 10 * 100 x 100 x 4 * 100 x 100 x 5 * 100 x 100 x 6 100 x 100 x 10

kg/m

Uneven-sided mm WxHxT

kg/m

0.10 0.16 0.22 0.21 0.30 0.42 0.26 0.38 0.50 0.64 0.32 0.47 0.61 0.74 0.55 0.72 0.89 0.43 0.65 0.83 1.02 1.19 0.71 1.22 0.53 0.79 1.04 1.29 1.52 1.99 2.43 0.65 0.98 1.26 1.58 1.85 2.52 2.97 1.83 2.18 2.52 1.96 3.11 3.50 4.00 1.27 1.68 2.14 2.50 3.29 4.05 2.11 2.70 3.24 5.13

15 x 10 x 2 20 x 10 x 2 * 20 x 10 x 3 20 x 15 x 2 25 x 10 x 2 * 25 x 15 x 2 * 25 x 15 x 3 * 25 x 20 x 2 * 25 x 20 x 3 * 30 x 10 x 2 * 30 x 15 x 2 * 30 x 15 x 3 * 30 x 15 x 4 * 30 x 20 x 2 30 x 20 x 3 * 30 x 25 x 2 * 30 x 25 x 3 * 35 x 20 x 3 * 35 x 25 x 2 * 35 x 30 x 3 * 40 x 10 x 2 * 40 x 15 x 2 40 x 20 x 2 * 40 x 20 x 3 * 40 x 20 x 4 * 40 x 25 x 2 40 x 25 x 3 * 40 x 25 x 4 * 40 x 25 x 5 * 40 x 30 x 2 * 40 x 30 x 3 * 40 x 30 x 4 * 40 x 30 x 5 * 45 x 30 x 1.5 * 50 x 15 x 2 * 50 x 20 x 2 * 50 x 20 x 3 50 x 25 x 2 * 50 x 25 x 3 * 50 x 25 x 4 * 50 x 25 x 5 * 50 x 30 x 2 * 50 x 30 x 3 50 x 30 x 4 50 x 30 x 5 * 50 x 40 x 4 * 50 x 40 x 5 * 60 x 15 x 2 * 60 x 20 x 2 * 60 x 25 x 3 * 60 x 30 x 2 * 60 x 30 x 3 * 60 x 30 x 4 * 60 x 30 x 5 * 60 x 40 x 2 60 x 40 x 3

0.13 0.16 0.25 0.18 0.18 0.21 0.30 0.24 0.35 0.21 0.24 0.35 0.45 0.26 0.39 0.29 0.43 0.43 0.31 0.51 0.26 0.29 0.32 0.47 0.61 0.35 0.51 0.68 0.83 0.37 0.55 0.73 0.88 0.31 0.36 0.37 0.55 0.40 0.60 0.77 0.96 0.43 0.63 0.84 1.02 0.93 1.15 0.40 0.44 0.66 0.48 0.71 0.93 1.20 0.54 0.79

Uneven-sided mm WxHxT * 60 x 40 x 4 60 x 40 x 5 * 60 x 40 x 6 * 60 x 50 x 2 * 65 x 50 x 5 * 65 x 50 x 6 * 70 x 20 x 2 * 70 x 20 x 3 * 70 x 25 x 2.5 * 70 x 30 x 2 * 70 x 50 x 5 * 75 x 50 x 5 * 75 x 50 x 6 * 75 x 50 x 7 75 x 50 x 8 * 80 x 15 x 2 * 80 x 20 x 2 * 80 x 30 x 3 * 80 x 40 x 3 * 80 x 40 x 4 * 80 x 40 x 5 * 80 x 40 x 6 * 80 x 50 x 5 80 x 50 x 6 * 90 x 50 x 6 * 100 x 20 x 2 * 100 x 30 x 3 100 x 40 x 4 100 x 50 x 3 100 x 50 x 5 100 x 50 x 6 100 x 50 x 7 * 100 x 50 x 8 * 100 x 50 x 10 * 100 x 60 x 4 * 100 x 60 x 6 * 100 x 65 x 8 * 100 x 65 x 9 * 100 x 75 x 6 * 100 x 75 x 8 * 120 x 40 x 4 * 120 x 50 x 5 * 120 x 60 x 6 * 120 x 80 x 10 * 125 x 80 x 8 * 130 x 65 x 8 130 x 65 x 10 * 130 x 75 x 9 * 130 x 80 x 6 * 150 x 50 x 5 150 x 75 x 8 * 150 x 75 x 9 * 150 x 100 x 10 * 200 x 100 x 10

kg/m 1.04 1.30 1.53 0.59 1.49 1.78 0.49 0.71 0.63 0.53 1.68 1.68 1.93 2.25 2.60 0.51 0.55 0.90 0.99 1.26 1.63 1.85 1.76 2.01 2.20 0.63 1.02 1.47 1.24 1.96 2.34 2.80 3.07 3.79 1.73 2.50 3.44 3.81 2.84 3.61 1.75 2.22 2.83 5.15 4.27 4.05 5.27 4.77 3.33 2.63 4.70 5.26 6.60 8.22

* Price is dimension dependent. All stated weights are theoretical weights, which may vary.

We stock certain dimensions with DNV-certificate.

39


Aluminium Tubes - Square / Rectangular

Aluminium Tubes - Square - EN AW-6060 - T6 EN AW-6063 T6 Length: 6000mm EN 573-3, 755-1, 755-2, 755-7, 755-8 mm

kg/m

mm

kg/m

mm

kg/m

mm

kg/m

10 x 10 x 1.0 12 x 12 x 1.0 * 15 x 15 x 1.5 15 x 15 x 2.0 * 16 x 16 x 1.5 18 x 18 x 1.0 20 x 20 x 1.0 20 x 20 x 1.5 20 x 20 x 2.0 25 x 25 x 1.5 20 x 20 x 2.0 25 x 25 x 1.5 *R 25 x 25 x 2.0 * 25 x 25 x 3.0

0.10 0.12 0.23 0.32 0.24 0.20 0.21 0.30 0.39 0.38 0.39 0.38 0.52 0.72

*R 30 x 30 x 2.0 30 x 30 x 3.0 40 x 40 x 2.0 * R 40 x 40 x 2.5 * R 40 x 40 x 3.0 * R 40 x 40 x 4.0 45 x 45 x 2.0 * 50 x 50 x 2.0 R 50 x 50 x 2.5 50 x 50 x 3.0 * R 50 x 50 x 4.0 50 x 50 x 5.0 * 55 x 55 x 2.0 * R 60 x 60 x 1.8

0.61 0.88 0.83 1.05 1.19 1.56 0.93 1.05 1.30 1.54 1.99 2.43 1.15 1.10

* 60 x 60 x 2.0 * R 60 x 60 x 3.5 * 60 x 60 x 4.0 70 x 70 x 2.0 * 70 x 70 x 4.0 80 x 80 x 3.0 * 80 x 80 x 4.0 * R 80 x 80 x 5.0 90 x 90 x 4.0 * 100 x 100 x 2.0 *R 100 x 100 x 4.0 100 x 100 x 5.0 * 100 x 100 x 10.0 * 120 x 120 x 5.0

1.30 2.10 2.42 1.50 2.86 2.50 3.30 4.25 3.78 2.16 4.15 5.19 9.85 6.40

* 150 x 150 x 5.0

7.90

* Price is dimension dependent. R) Also supplied with corner radius. Price on request.

R = Corner radius

Length for profiles with corner radius, ask Alumeco.

Aluminium Tubes - Rectangular - EN AW-6060 T6 Length: 6000mm EN 573-3, 755-1, 755-2, 755-7, 755-8 mm

kg/m

mm

kg/m

20 x 10 x 1.5 * 20 x 10 x 2.0 * 20 x 15 x 2.0 25 x 15 x 2.0 * 25 x 20 x 2.0 * 30 x 15 x 2.0 R 30 x 20 x 2.0 * 30 x 25 x 2.0 * 35 x 20 x 2.0 * 35 x 25 x 2.0 * 40 x 15 x 2.0 40 x 20 x 1.5 40 x 20 x 2.0 * 40 x 20 x 2.5 * 40 x 20 x 3.0 40 x 25 x 2.0 * 40 x 30 x 2.0 * 40 x 30 x 3.0 * 50 x 15 x 2.0 50 x 20 x 2.0 * 50 x 25 x 2.0 * 50 x 25 x 3.0 50 x 30 x 2.0 50 x 30 x 2.5 50 x 30 x 3.0 * 50 x 34 x 2.5 * 50 x 40 x 2.0 * 50 x 40 x 2.5 * 50 x 40 x 3.0 * 50 x 40 x 4.0

0.24 0.29 0.35 0.40 0.45 0.46 0.50 0.56 0.56 0.61 0.56 0.46 0.61 0.81 0.88 0.66 0.72 1.12 0.66 0.72 0.80 1.19 0.83 1.10 1.20 1.15 0.96 1.20 1.54 1.78

* 60 x 20 x 2.0 * 60 x 25 x 3.0 * 60 x 30 x 2.0 * 60 x 30 x 3.0 * 60 x 40 x 2.0 60 x 40 x 2.5 * 60 x 40 x 3.0 60 x 40 x 4.0 * 60 x 50 x 3.0 * 70 x 20 x 2.0 * 80 x 20 x 2.0 * 80 x 30 x 2.0 * 80 x 30 x 3.0 * 80 x 40 x 2.0 80 x 40 x 3.0 * 80 x 40 x 4.0 * R 80 x 50 x 3.0 * 80 x 50 x 4.0 * 80 x 60 x 4.0 * 90 x 30 x 2.5 100 x 18 x 2.0 100 x 20 x 2.0 * 100 x 25 x 1.5 * 100 x 30 x 3.0 * 100 x 40 x 2.0 100 x 40 x 2.5 * 100 x 40 x 3.0 * 100 x 40 x 4.0 * 100 x 50 x 2.0 100 x 50 x 3.0

0.83 1.29 0.93 1.36 1.04 1.30 1.60 1.99 1.70 0.92 1.08 1.15 1.71 1.28 1.85 2.40 2.00 2.64 3.03 1.55 1.24 1.26 1.00 2.18 1.50 1.90 2.28 2.94 1.60 2.36

Length for profiles with corner radius, ask Alumeco. * Price is dimension dependent.

40

mm * 100 x 50 x 4.0 * 100 x 50 x 5.0 * 100 x 60 x 3.0 * 100 x 60 x 4.0 * 100 x 80 x 3.0 * 120 x 18 x 2.0 * 120 x 20 x 2.0 * 120 x 30 x 3.0 * 120 x 40 x 2.0 * 120 x 40 x 3.0 * 120 x 40 x 4.0 * 120 x 50 x 4.0 * 120 x 60 x 2.5 * 120 x 60 x 3.0 * 120 x 60 x 4.0 * 140 x 50 x 4.0 * 150 x 40 x 4.0 150 x 50 x 3.0 * 150 x 50 x 4.0 * R 150 x 50 x 5.0 * 150 x 100 x 3.0 * 160 x 40 x 4.0 * 180 x 40 x 4.0 * 200 x 50 x 4.0 * 200 x 100 x 4.0 * 200 x 100 x 5.0

kg/m 3.07 3.78 2.50 3.40 2.89 1.46 1.54 2.43 1.69 2.49 3.29 3.64 2.37 2.81 3.70 3.73 3.92 3.14 4.15 5.15 3.95 4.20 4.58 5.25 6.48 7.83

R = Corner radius All stated weights are theoretical weights, which may vary.

Other dimensions can be supplied subject to inquiry.


Aluminium Profiles - Anodized

Aluminium Profiles nature anodized with E6/20 microns ENâ&#x20AC;&#x2C6;AW-6060 T6 Manufacturing length 6000 mm. EN 573-3, 755-1, 755-2, 755-7, 755-8, 755-9

Profile anodizing

WxHxT Even-sided mm

kg/m

WxHxT Even-sided mm

kg/m

WxHxWxT Even-sided mm

kg/m

15 x 15 x 2 20 x 20 x 2 25 x 25 x 2 30 x 30 x 2 30 x 30 x 3 35 x 35 x 3 40 x 40 x 2

0.16 0.21 0.26 0.32 0.46 0.55 0.43

20 x 20 x 1 20 x 20 x 2 25 x 25 x 2 30 x 30 x 2 40 x 20 x 2 40 x 40 x 2 40 x 40 x 4 70 x 20 x 2

0.21 0.39 0.52 0.61 0.61 0.83 1.60 0.92

10 x 20 x 10 x 2 15 x 15 x 15 x 2 20 x 20 x 20 x 2 20 x 40 x 20 x 2 25 x 25 x 25 x 2 40 x 20 x 40 x 2

0.20 0.23 0.32 0.51 0.40 0.52

41


Aluminium Profiles - Bulb / Aluminium Tubes - Round

Aluminium Profiles - Bulb

EN AW-6082 T6 - EN AW-5083 H112 Manufacturing lengths 5000 - 6000 mm EN 573-3, 755-1, 755-2, 755-9 Dimension H x S

kg/m

C1

C2

60 x 5.0

1.24

15

10

65 x 3.5

1.23

15

15

75 x 4.0

1.60

17

17

85 x 4.5

2.02

19

19

120 x 5.0

3.60

27

27

140 x 6.0

4.72

30

30

180 x 7.0

7.80

40

40

Not in stock.

C2 C1

H

S

All stated weights are theoretical weights, which may vary.

Aluminium Tubes - Round

D

EN AW-6060 T6 - EN AW-6005A T6 / EN AW-6082 T6 Manufacturing length 6000 mm EN-573-3, 755-1, 755-2, 755-7, 755-8 mm OD x t

kg/m

mm OD x t

kg/m

mm OD x t

kg/m

6.0 x 1.0

0.05

* 22.0 x 2.0

0.40

* 40.0 x 2.0

0.65

8.0 x 1.0

0.06

* 22.0 x 3.0

0.48

* 40.0 x 2.5

0.79

10.0 x 1.0

0.08

25.0 x 1.0

0.21

40.0 x 3.0

0.95

* 10.0 x 1.5

0.11

25.0 x 1.5

0.30

* 40.0 x 3.5

1.09

* 10.0 x 2.0

0.14

25.0 x 2.0

0.39

* 40.0 x 4.0

1.23

12.0 x 1.0

0.10

25.0 x 2.5

0.47

40.0 x 5.0

1.49

* 12.0 x 1.5

0.14

25.0 x 3.0

0.57

40.0 x 7.5

2.07

* 12.0 x 2.0

0.17

* 25.0 x 3.5

0.64

* 42.0 x 2.5

0.85

* 13.0 x 1.5

0.16

* 25.0 x 5.0

0.85

* 42.0 x 3.0

1.00

* 14.0 x 3.0

0.28

28.0 x 1.5

0.34

* 42.0 x 3.5

1.15

* 15.0 x 1.0

0.12

30.0 x 2.0

0.48

* 42.0 x 5.0

1.60

15.0 x 1.5

0.18

* 30.0 x 2.5

0.59

45.0 x 2.0

0.74

* 15.0 x 2.0

0.23

30.0 x 3.0

0.69

* 45.0 x 3.0

1.17

16.0 x 1.5

0.19

* 30.0 x 4.0

0.89

45.0 x 5.0

1.70

* 16.0 x 2.0

0.25

* 30.0 x 5.0

1.07

* 48.0 x 2.5

0.99

* 16.0 x 3.0

0.34

* 30.0 x 6.0

1.38

* 48.0 x 3.0

1.15

18.0 x 1.0

0.15

* 32.0 x 1.5

0.41

* 48.3 x 4.0

1.53

* 18.0 x 1.2

0.18

* 32.0 x 2.0

0.51

50.0 x 1.5

0.62

18.0 x 1.5

0.21

* 32.0 x 3.0

0.73

50.0 x 2.0

0.82

* 18.0 x 2.0

0.28

* 32.0 x 3.5

0.85

* 50.0 x 2.5

1.00

* 19.0 x 1.0

0.16

35.0 x 1.5

0.43

* 50.0 x 3.0

1.20

19.0 x 1.5

0.23

35.0 x 2.0

0.56

* 50.0 x 3.5

1.39

* 19.0 x 2.0

0.31

* 35.0 x 2.5

0.74

* 50.0 x 4.0

1.57

20.0 x 1.0

0.16

* 35.0 x 3.0

0.82

50.0 x 5.0

1.91

20.0 x 1.5

0.24

* 35.0 x 5.0

1.28

* 50.0 x 10.0

3.81

* 20.0 x 2.0

0.31

* 36.0 x 4.0

1.08

* 50.0 x 12.0

3.90

20.0 x 3.0

0.44

* 38.0 x 1.5

0.47

* 50.0 x 15.0

4.45

* 20.0 x 4.0

0.54

* 38.0 x 3.0

0.89

54.0 x 2.0

0.89

* 20.0 x 5.0

0.64

* 38.0 x 4.0

1.16

* 55.0 x 2.0

0.90

22.0 x 1.5

0.27

40.0 x 1.5

0.49

* Price is dimension dependent.

42

All stated weights are theoretical weights, which may vary. More information on page 43.


Aluminium Tubes - Round

D

EN AW-6060 T6 - EN AW-6005A T6 / EN AW-6082 T6 Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-7, 755-8 mm OD x t

kg/m

mm OD x t

kg/m

mm OD x t

kg/m

* 55.0 x 2.5

1.17

90.0 x 5.0

3.61

* 150.0 x 8.0

9.66

* 55.0 x 5.0

2.27

* 90.0 x 10.0

7.25

* 150.0 x 10.0

12.40

* 60.0 x 1.5

0.78

* 90.0 x 20.0

11.80

* 150.0 x 15.0

17.20

* 60.0 x 2.0

0.99

* 96.0 x 3.0

2.37

* 150.0 x 20.0

22.50

* 60.0 x 2.5

1.30

100.0 x 2.0

1.70

* 160.0 x 5.0

6.60

60.0 x 3.0

1.46

* 100.0 x 3.0

2.47

* 160.0 x 15.0

18.50

* 60.0 x 4.0

1.90

* 100.0 x 4.0

3.30

* 160.0 x 20.0

24.17

60.0 x 5.0

2.40

100.0 x 5.0

4.04

* 164.0 x 7.0

9.40

* 60.0 x 6.0

2.94

* 100.0 x 6.0

5.01

* 170.0 x 10.0

13.81

* 60.0 x 10.0

4.67

* 100.0 x 10.0

7.65

* 170.0 x 15.0

20.00

* 60.0 x 15.0

6.12

* 100.0 x 15.0

10.86

* 175.0 x 7.0

* 63.0 x 1.5

0.79

* 100.0 x 16.0

11.43

* 180.0 x 10.0

15.11

* 65.0 x 5.0

2.55

* 100.0 x 20.0

13.90

* 180.0 x 20.0

27.50

9.99

* 65.0 x 10.0

5.52

* 100.0 x 30.0

18.13

* 180.0 x 40.0

48.00

* 70.0 x 2.0

1.16

* 102.0 x 1.7

1.48

* 190.0 x 10.0

16.07

* 70.0 x 3.0

1.71

* 106.0 x 3.0

2.73

* 190.0 x 15.0

23.50

* 70.0 x 4.0

2.39

110.0 x 2.0

1.83

* 200.0 x 5.0

8.30

70.0 x 5.0

2.76

110.0 x 5.0

4.50

200.0 x 8.0

14.40

* 70.0 x 10.0

5.19

* 110.0 x 10.0

8.93

* 200.0 x 10.0

16.20

75.0 x 3.0

1.85

120.0 x 5.0

4.90

* 200.0 x 15.0

23.96

75.0 x 5.0

3.02

* 120.0 x 10.0

9.82

* 200.0 x 20.0

31.50

* 75.0 x 10.0

5.51

* 120.0 x 15.0

13.60

* 206.0 x 3.0

5.50

* 76.0 x 3.0

1.90

* 120.0 x 20.0

16.96

* 210.0 x 5.0

8.69

* 80.0 x 2.0

1.33

* 125.0 x 4.0

4.12

* 210.0 x 10.0

16.99

* 80.0 x 3.0

1.96

* 125.0 x 7.5

7.50

* 216.0 x 8.0

14.37

* 80.0 x 4.0

2.58

* 130.0 x 3.0

3.35

* 230.0 x 10.0

18.70

80.0 x 5.0

3.18

* 130.0 x 5.0

5.31

* 240.0 x 10.0

19.90

* 80.0 x 10.0

5.95

* 130.0 x 10.0

10.84

* 250.0 x 5.0

10.80

* 80.0 x 15.0

8.27

* 140.0 x 5.0

5.72

* 250.0 x 10.0

20.40

* 80.0 x 20.0

10.22

* 140.0 x 10.0

11.05

* 260.0 x 10.0

21.25

* 86.0 x 3.0

2.11

* 140.0 x 20.0

20.43

* 266.0 x 8.0

17.70

* 90.0 x 3.0

2.22

* 150.0 x 3.0

3.74

* 318.0 x 9.0

23.60

* 90.0 x 4.0

2.91

150.0 x 5.0

6.18

* Price is dimension dependent.

All stated weights are theoretical weights, which may vary.

Other dimensions can be supplied subject to inquiry. Please also ask for these alloys: EN AW-5754, EN AW-5083, EN AW-6012, EN AW- 2007

43


Aluminium - Roller Tubes

Chemical Composition: EN AW-6060 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.3-0.6

0.1-0.3

0.1

0.1

0.35-0.6

0.05

0.15

0.15

Rest

Roller Tubes T.O.P.-quality: Material 6060

Roller Tubes H.T.-quality: Material 6060

Roller Tubes I.S.Q.-quality: Material 6060

Temper-hardened Strength T6

Temper-hardened Strength T6

Temper-hardened Strength T6

Type: Hot-extruded via chamber mould and drawn

Type : Hot-extruded via chamber

Type : Hot-extruded via chamber

Tolerances: Outside diameter ISO k 13 Inside diameter ISO H 11 Inequality of wall in % of the nominal wall thickness S < 7 mm 6% S > 7 mm 5%

Tolerances: Outside diameter ISO k 15 Inside diameter ISO M 15 Inequality of wall in % of the nominal wall thickness S > 10 mm 5%

Tolerances: Outside diameter ISO k 14 Inside diameter ISO H 14 Inequality of wall in % of the nominal wall thickness S < 10 mm 5%

Straightness:

Straightness:

Straightness: D < 250 mm D > 250 mm

0.2 mm/m

Concentric running accuracy between centres: Max: 0.4 mm/m

0.5 mm/m

Concentric running accuracy between centres: Max: 1.0 mm/m

0.6 mm 0.8 mm/m

Concentric running accuracy between centres: D < 250 mm 1.2 mm/m D > 250 mm 1.6 mm/m

Economy and quality: High quality roller tubes - a necessity for economical production. Fine tolerances on outside and inside diameters, uniform thickness and concentric running accuracy help to optimise the production process and reduce material consumption. Additional technical and economical benefits: • Few tensions • Minimal imbalance • Optimal chipping properties • Low inertia force • Highly anodizable • High durability

44

Quality example: Roller tube in T.O.P.-quality. Dimensions 120 x 7 x 1800 Outside diameter Inside diameter Hight of arch, max: Concentric running accuracy between centres, max: Inequality of wall, max:

ISO k 13 ISO H 11 0.36 mm 0.72 mm 0.35 mm


D

Roller Tubes - ENâ&#x20AC;&#x2C6;AW-6060 T6 Manufacturing length 6010 mm EN 755-1, 755-2 OD x t mm

kg/m

Quality

OD x t mm

kg/m

Quality

OD x t mm

kg/m

Quality

30 x 4.0

0.90

T.O.P.

110 x 15.0

12.30

H.T.

170 x 20.0

26.00

H.T.

40 x 4.0 40 x 6.0

1.20

T.O.P.

110 x 20.0

1.80

T.O.P.

110 x 25.0

15.60

H.T.

180 x 5.0

7.60

T.O.P.

18.40

H.T.

180 x 8.0

11.90

T.O.P.

50 x 3.0

1.20

T.O.P.

50 x 5.0

1.90

T.O.P.

114 x 10.0

9.00

T.O.P.

180 x 10.0

14.70

T.O.P.

120 x 5.0

5.00

T.O.P.

180 x 15.0

21.40

H.T.

50 x 8.0

2.90

T.O.P.

120 x 7.0

6.80

T.O.P.

180 x 20.0

27.70

H.T.

50 x 10.0 60 x 2.0

3.50

T.O.P.

120 x 8.0

7.80

T.O.P.

182 x 11.0

16.30

T.O.P.

1.00

T.O.P.

120 x 10.0

9.50

T.O.P.

190 x 5.0

8.00

T.O.P.

60 x 3.0

1.50

T.O.P.

120 x 15.0

13.60

H.T.

190 x 10.0

15.60

T.O.P.

60 x 5.0

2.40

T.O.P.

120 x 20.0

17.30

H.T.

190 x 15.0

22.70

T.O.P.

60 x 6.0

2.80

T.O.P.

125 x 10.0

9.90

T.O.P.

195 x 12.5

19.70

I.S.Q.

60 x 7.5

3.40

T.O.P.

128 x 4.0

4.30

T.O.P.

200 x 10.0

16.40

T.O.P.

60 x 10.0

4.30

T.O.P.

130 x 5.0

5.40

T.O.P.

200 x 12.5

20.30

T.O.P.

60 x 15.0

5.80

H.T.

130 x 7.0

7.40

T.O.P.

200 x 15.0

24.00

I.S.Q.

62 x 6.0

2.90

T.O.P.

130 x 10.0

10.40

T.O.P.

200 x 25.0

37.90

I.S.Q.

70 x 3.0

1.70

T.O.P.

130 x 15.0

14.90

T.O.P.

205 x 12.5

20.80

H.T.

70 x 5.0

2.80

T.O.P.

130 x 20.0

19.00

H.T.

210 x 10.0

17.30

I.S.Q.

70 x 8.0

4.30

T.O.P.

132 x 8.5

9.10

T.O.P.

210 x 15.0

25.30

I.S.Q.

70 x 10.0

5.20

T.O.P.

140 x 5.0

5.80

T.O.P.

210 x 20.0

32.90

I.S.Q.

75 x 7.0

4.10

T.O.P.

140 x 7.0

8.10

T.O.P.

220 x 10.0

18.20

I.S.Q.

75 x 10.0

5.60

T.O.P.

140 x 10.0

11.20

T.O.P.

220 x 15.0

26.60

I.S.Q.

80 x 3.0

2.00

T.O.P.

140 x 15.0

16.20

H.T.

225 x 15.0

27.30

I.S.Q.

80 x 5.0

3.20

T.O.P.

140 x 20.0

20.80

H.T.

230 x 15.0

27.90

I.S.Q.

80 x 10.0

6.10

T.O.P.

144 x 11.0

12.70

T.O.P.

240 x 10.0

19.90

I.S.Q.

80 x 15.0

8.40

H.T.

150 x 5.0

6.30

T.O.P.

240 x 15.0

29.20

I.S.Q.

80 x 20.0

10.40

H.T.

150 x 7.5

9.20

T.O.P.

250 x 10.0

20.80

I.S.Q.

81x 8.0

5.10

T.O.P.

150 x 10.0

12.10

T.O.P.

250 x 15.0

30.50

I.S.Q.

90 x 6.0

4.40

T.O.P.

150 x 15.0

17.50

T.O.P.

260 x 15.0

31.80

I.S.Q.

90 x 10.0

6.90

T.O.P.

150 x 20.0

22.50

H.T.

270 x 17.5

38.20

I.S.Q.

90 x 15.0

9.70

H.T.

152 x 6.0

7.60

T.O.P.

285 x 12.5

29.50

I.S.Q.

90 x 20.0

12.10

H.T.

152 x 10.0

12.30

T.O.P.

285 x 20.0

45.90

I.S.Q.

100 x 5.0

4.10

T.O.P.

160 x 5.0

6.70

T.O.P.

285 x 26.0

58.50

I.S.Q.

100 x 6.0

4.90

T.O.P.

160 x 8.0

10.50

T.O.P.

300 x 10.0

25.10

I.S.Q.

100 x 10.0

7.80

T.O.P.

160 x 10.0

13.00

T.O.P.

303 x 18.0

44.40

I.S.Q.

100 x 15.0

11.00

H.T.

160 x 15.0

18.80

H.T.

310 x 20.0

50,20

I.S.Q.

100 x 20.0

13.80

H.T.

160 x 20.0

24.20

H.T.

325 x 17.0

45.30

I.S.Q.

102 x 8.5

6.90

T.O.P.

170 x 5.0

7.10

T.O.P.

360 x 17.0

50.40

I.S.Q.

106 x 8.0

6.80

T.O.P.

170 x 10.0

13.80

T.O.P.

365 x 25.5

74.90

I.S.Q.

110 x 5.0

4.50

T.O.P.

170 x 12.0

16.40

T.O.P.

110 x 10.0

8.70

T.O.P.

170 x 15.0

20.10

H.T.

Can also be supplied cut to length.

All stated weights are theoretical weights, which may vary.

Please allow approx. 1-2 weeksâ&#x20AC;&#x2122; delivery time for dimensions not in stock.

45


Aluminium - Cylinder Tubes

Chemical Composition: EN AW-6060 - EN 573-3: 2009 Si

Fe

Cu

Mn

Mg

Cr

Zn

Others

Al

0.3-0.6

0.1-0.3

0.1

0.1

0.35-0.6

0.05

0.15

0.15

Rest

Specification Aluminium cylinder tubes: Alloy:

EN AW 6060 T6

Inside Ø tolerance: ISO H11 Roughness: Ra < 1 micron Surface: Fine-drawn, no covering Surface: Fine-drawn, internally and externally hard Layer thickness: 25 microns ± 5 microns Strength:

450 HV

Straightness: 0.35 mm per m

Wear - resistance Hard anodized

Additional technical data and benefits

• Nominal width 20-320 mm • Wall thickness 1.5-10 mm • Length up to 6000 mm

• High wear resistance • Fine tolerances • High quality surface • Excellent low friction properties • Lightweight • Pressure and corrosion resistant

• Aluminium Cylinder tubes of high precision are always in stock A technically extensive, high qual­ ity range includes different for­ mats to meet individual problem solutions. • Chamber-pressed • Chamber-pressed and drawn • Piercing-pressed and drawn • Non-covered • Hard anodized

Wall thickness under constant load Diameter (mm)

100000

Cylinder tubes for any use

Galvanized tempered chromium

50000 Cyanide tempered steel

180 150 W

al

lt

100 90 80 70

6 5

60 Annealed steel (105 kp/mm)

3. 4 m 5 m m m 3 m 2. m 5 m m 2 m m

50 40 1.

5

30 25

10000 AL 99

Pressure (bar)

hi

6 7 8 9 10

40

m

ck

ne

7 m

ss

8 m

m

10

m

m

m

m

m

m

m

m

50 60

80

100

200

300

400 500

Standard values for the definition of the wall thickness on alumin­ ium cylinder tubes, Alloy - 6060, safety to 0.2-limit:2.

5000

2000 0

25

50

Degrading µm

Profitability and quality The cylinder tube is a special product in our extensive product range. Using this product, high precision can be achieved, which means they are often used as control and operating cylinders. Prices for special dimensions and formats available on request.

46

700


D

Aluminium Cylinder Tubes - EN AW-6060 T6 Manufacturing length 3050 mm EN 573-3, EN 755-1, 755-2

Nominal size Outside diameter x mm wall thickness mm

kg/m

12

16 x 2.0

0.24

16

20 x 2.0

0.31

20 25

25 x 2.5

0.48

28 x 1.5 30 x 2.5

0.34 0.58

Nominal size Outside diameter x mm wall thickness mm 85 86 87 88

80

85 100

x x x x

kg/m

2.5 3.0 3.5 4.0

1.75 2.12 2.48 2.85

89 x 2.0

1.48

105 x 2.50 106 x 3.00

2.17 2.65

32

36 x 2.0 38 x 3.0

0.58 0.89

35

40 x 2.5

0.80

100

40

44 x 2.0 45 x 2.5 46 x 3.0

0.71 0.90 1.09

107 x 3.50 108 x 4.00

3.07 3.55

110 125

116 x 3.00

2.88

54 x 2.0 55 x 2.5 56 x 3.0

0.88 1.11 1.35

132 x 3.50 133 x 4.00

4.85 4.38

150 160

160 x 5.00

6.60

58 63

63 x 2.5

1.28

167 x 3.50 170 x 5.00

4.85 7.00

68 x 2.5 69 x 3.0

1.39 1.68

200

210 x 5.00

8.69

250

262 x 6.00

13.03

70

75 x 2.5 76 x 3.0

1,54 1.86

300

312 x 6.00

15.60

320

336 x 8.00

22.26

50

Aluminium Profile Cylinder Tubes EN AW-6060 T6 Manufacturing length 3000 mm EN 573-3, 755-1, 755-2, 755-9 For metric thread

H 11

36.0

32.5

5.35

±0.15

10.0

0.5

0.3

42.5

40.0

H 11

45.0

38.0

5.35

±0.15

10.0

0.5

0.5

48.0

50.0

H 11

55.0

46.5

6.65

±0.15

12.0

0.4

0.3

58.5

63.0

H 11

68.0

56.5

6.65

±0.15

12.0

0.4

0.3

70.0

80.0

H 12

86.0

72.0

8.75

±0.15

14.0

0.4

0.4

86.0

100.0

H 12

106.0

89.0

8.75

±0.15

15.0

0.5

0.3

107.0

125.0

H 12

132.0

110.0

10.50

±0.15

17.0

0.5

0.4

133.0

C

R 90

A

G

C

A

32.0

I

B (mm) C (mm) D (mm) F (mm) E (mm) G (mm) H (mm) I (mm)

∅ AP

DF

P

E

A (mm)

∅B

∅H A

For self-cutting screws

32.5

5.40

±0.20

10.4

0.5

0.3

42.9

45.0

38.0

5.40

±0.20

10.4

0.5

0.5

48.4

50.0

H 11

55.0

46.5

7.40

±0.25

13.5

0.4

0.3

60.0

63.0

H 11

68.0

56.5

7.40

±0.25

13.5

0.4

0.3

70.0

80.0

H 12

86.0

72.0

9.25

±0.15

15.0

0.4

0.4

87.0

100.0

H 12

106.0

89.0

9.25

±0.15

16.0

0.5

0.3

106.5

125.0

H 12

132.0

110.0

10.50

±0.15

17.0

0.5

0.3

133.0

160.0

H 13

170.0

140.0

17.50

±0.15

25.0

0.5

0.4

172.0

R C

90

A

A

36.0

H 11

G

H 11

40.0

C

32.0

I

B (mm) C (mm) D (mm) F (mm) E (mm) G (mm) H (mm) I (mm)

∅ AP ∅B

DF

P

E

A (mm)

∅H A

47


Aluminium - Fittings

90° Aluminium Welding Bends - EN AW-5754 - EN AW-6060 EN 573-3, DIN 1725, DIN 2605, DIN 2609

90

d1 a

s

a d1

We would be pleased to receive your inquiries for 180° bends as well as dimen­ sions not mentioned.

d1

Dimension

s

a

d1

Dimension

s

a

25 x 3.0

27.5

40 x 5.0

38.0

30 x 2.5

33.5

50 x 3.0

62.5

30 x 3.0

33.5

50 x 4.0

62.5

32 x 3.0

33.5

60 x 3.0

76.0

35 x 5.0

33.5

60 x 5.0

72.0

40 x 3.0

45.0

70 x 5.0

82.5

40 x 4.0

45.0

75 x 5 . 0

92.0

Dimension

s

a

d1

Dimension

s

a

80 x 3.0

107.5

100 x 5.0

133.5

80 x 5.0

95.0

106 x 3.0

142.5

90 x 3.0

114.5

110 x 5.0

142.5

90 x 5.0

114.5

125 x 4.0

180.0

100 x 3.0

133.5

160 x 5.0

215.0

Aluminium Screw Sockets

EN AW-6082 T6 / EN AW 6060 T6 - With Whitworth pipe threads EN 573-3 DIN 2999 Dimension Inch

l

Dimension mm

Outside Ø d

Length I

/4"

8

20

25

/8"

10

25

30

/2"

15

30

35

/4"

20

35

40

1"

25

40

45

11/4"

32

50

50

1 d

3 1 3

11/2"

40

55

55

2"

50

70

60

21/2"

65

90

70

3"

80

100

75

Aluminium Nipples

EN AW-6082 T6 / EN AW 6060 T6 - With Whitworth pipe threads EN 573-3, DIN 2999 Dimension Dimension Outside Ø Inch mm d

l A

Length A

/4"

8

13

50

20

/2"

15

22

50

20

/4"

20

28

50

20

1 d

Length I

1 3

1"

25

35

60

25

11/4"

32

42

65

25

1

1 /2"

40

50

75

30

2"

50

60

75

30

We can also supply: Alu. welding collars / Alu. collars / Alu. welding nipples / Alu. T-pieces / Alu. reductions.

48


Transport systems

• TOP SECTIONS • BOTTOM SECTIONS • MIDDLE SECTIONS • CORNER SECTIONS • AND MUCH MORE...

Aluminium transport systems are delivered directly from stock. For more details please visit us at www.alumeco.com

49


Aluminium - Cargo Sections

Aluminium Cargo Sections - EN AW-6005A T6 Manufacturing length 6000 mm EN 573-3, EN 755-1, 755-2, 755-9

Ix = 2868449 mm4 Wx = 42978 mm3 Iy = 2868449 mm4 Wy = 42978 mm3

Ix = 168450 mm4 Wx = 8743 mm3 Iy = 3594902 mm4 Wy = 36305 mm3

198

2,5

Profile 7069

6,3

3,3

Profile 1517

38

Weight per m 8.70

Weight per m 2.45

25,4

Not in stock

Not in stock

133,3

Ix = 5110595 mm4 Wx= 67082 mm3 Iy = 5110595 mm4 Wy = 67082 mm3

228,5

Profile 7235

7,1

Ix = 74420 mm4 Wx = 5204 mm3 Iy = 3857535 mm4 Wy = 33745 mm3 28,5

2

Weight per m 11.20

33

Weight per m 1.95

Not in stock

152,4

Ix = 3410000 mm4 Wx = 51300 mm3 Iy = 3410000 mm4 Wy = 51300 mm3

Ix = 42975 mm4 Wx = 3312 mm3 Iy = 3963457 mm4 Wy = 34669 mm3

228,5

Profile 384-4

3 24

2

6,5

Weight per m 8.90

41

Not in stock

Not in stock Ix = 220410  mm4 Wx = 6959  mm3 Iy = 252644 mm4 Wy = 11406  mm3

31,7

Ix = 76559 mm4 Wx = 6657 mm3 Iy = 4792458 mm4 Wy = 45642 mm3

210

Profile 7242

52

4

23

Profile 7003

Weight per m 2.40

Weight per m 2.98

Ix = 196729 mm4 Wx = 6493 mm3 Iy = 170190  mm4 Wy = 8957 mm3

25,4

6,3

Profile 7067 Weight per m 1.85

133

6,35

Profile 7176

Ix = 479213 mm4 Wx = 19169 mm3 Ix = 9676665 mm4 Wx = 84218 mm3

229,8

4,2

51

50,0

Profile 7071

Profile 42205

Weight per m 2.20

Weight per m 4.40

Not in stock

Not in stock Can be supplied cut to length.

Ix = 63485 mm4 Wx = 5520 mm3 Ix = 3674126 mm4 Wx = 34992 mm3

210

3

23

Profile 7001 Weight per m 2.30

Not in stock All stated weights are theoretical weights, which may vary.

50


Aluminium/Steel - Joint Compositions / Aluminium - Strongbacking

Aluminium/Steel Joint Compositions Dimension: (H x W)

H = St + Al + Al

Weight pr. m

34 x 24 mm in lengths of 3800 mm

(20 + 3 + 10)

ca. 4.6 kg

34 x 28 mm in lengths of 3800 mm

(20 + 3 + 10)

ca. 5.3 kg

Other dimensions on request.

Please note: 1. Do not heat above 300째 C 2. Do not bend with a radius less than 300 mm. Aluminium AIMg 4,5 Mn

10

3

3 mm

Aluminium 3 mm

Steel

20

St 52,3

Aluminium-Strongbacking: Standard types

For welding steel constructions. Extruded aluminium profile in a sea water-resistant alloy, cut to length. Bridge grooved to customer specifications.

120 55 mm 65 173,5 280

Dim: (Profile) 280 x 40 mm. We also supply in other widths, e.g. 560, 770 and 840 mm. Can be supplied grooved (single or multiple) according to customer specifications.

120 55 mm 65 417 560

Advantages: Quick, recyclable, cost reducing.

120 55 mm 65 453,5 840

51


Aluminium - Special Profiles

Alumeco takes part - from the very first idea to the finished product

Logic and logistics in an extended co-operation

In the development phase you will find that Alumeco is an active, creative and highly qualified sparring partner during the whole process from the very first idea to the finished product solution. It is about speaking the same language as you and reading your demands in the particular situation.

The co-operation with Alumeco does not necessar­ ily have to end as soon as the product has been de­ veloped. We are also an efficient sparring partner within the fields of:

Only few competitors match the competence and know-how that Alumeco has accumulated con­ cerning development of customer designed profiles in aluminium. We know the many applications of this material. We know our customer´s demands and have a technical knowledge enabling us to carry on a dialogue on a very high level. That very dialogue with our customers is the prerequisite for developing individual solutions and customer designed profiles.

• Logistics

• Stock keeping • Purchasing • Assembling • Packing • Delivery

Outsourcing Many companies consider what functions they with advantage can entrust to external partners. This is also true for the total handling of aluminium. More and more of Alumeco´s customers choose to out­ source the entire flow of aluminium to us.

52

For these customers, Alumeco takes care of all busi­ ness from ordering to production and transporta­ tion. The result is a more efficient business where everyone is focusing on what they do best. For Alumeco it is aluminium.


on our examples e r o m e e S homepage

Hanging profile

Hat profile

Profiles for door and window

Profiles at your free disposal Alumeco has a certain number of dies at its disposal which can be used by all our customers. The die costs are already paid, and no extra costs are added. You can find more profile drawings on our site:

www.alumeco.com

53


Colour Marks According to Alloy

To avoid mixing materials we have marked our profiles and bars: Alloy (EN AW)

Alloy DIN

2007

Al Cu Mg Pb

2011

Al Cu Bi Pb

Colour

Black

(RAL 9004)

Red

(RAL 3020)

2014

Gold

(RAL 1036)

6026

Orange

(RAL 2004)

Yellow

(RAL 1023)

5754

Al Mg 3

6005

Al Mg Si 0.7

Turquoise

(RAL 5018)

6012

Al Mg Si Pb

White

(RAL 9010)

Pink

(RAL 4003)

6012A

6060

Al Mg Si 0.5

Colourless

6262R

Al Mg Si 1

Green

(RAL 6018)

6082

Al Mg Si 1

Blue

(RAL 5010)

7075

Al Zn Mg Cu 1.5

Purple

(RAL 4005)

54


Machining

Own service centre As a natural supplement to our full service as the

Band saws

leading aluminium wholesaler, Alumeco offers machi­

In addition Alumeco disposes of saws for cutting of bars

ning and sawing owing to our modern and big assem­

and profiles up to Ø 580 mm.

bly of machinery. In our service centre we offer sawing of aluminium plates in dimensions up to:

Contact Alumeco A/S the next time you inquire cutting of plates and roundels, shortening of profiles, band

• width: 4300 mm

sawing or foil application. We have the capacity to

• length: 7000 mm

handle orders for both large and small numbers.

• thickness: 250 mm

Circular saws For cutting of profiles and bars, Alumeco disposes of saws with cutting dimensions up to: • width: 600 mm • length: 250 mm

55


Technical Information

Aluminium Sheets/Plates EN 485-2: 2008 Mechanical Properties Alloy

EN AW-1200 Al99.0

Temper

O/H111 H12

H14

H22

H24

EN AW-1050A Al99.5

O/H111

H112 H12

H14

H22

H24

EN AW-3103 AlMn 1

O/H111

H12

H14

H22

H24

EN AW-3105 Al Mn1Mg 0.5

O/H111 H12 H14 H22 H24

EN AW-5005 AlMg1

O/H111

H12

H14

H22/H32

H24/H34

EN AW-5052 AlMg 2.5

O/H111

(extraction)

Thickness

Tensile strength

Proof stress

Elongation

mm

Rm MPa

Rp0.2 MPa

min. %

above

to

Min.

Max.

Min.

0.5 1.5 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 6.0 > _6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 0.5 1.5 0.5 1.5 0.5 1.5 0.5 1.5 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 6.0

1.5 3.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 12.5 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 1.5 3.0 1.5 3.0 1.5 3.0 1.5 3.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 12.5

75 75 95 95 95 115 115 115 95 95 95 115 115 115 65 65 65 65 75 85 85 85 85 105 105 105 105 85 85 85 105 105 105 105 90 90 90 115 115 15 140 140 140 115 115 115 140 140 140 100 100 130 130 150 150 130 130 150 150 100 100 100 125 125 125 145 145 145 125 125 125 145 145 145 170 170 170 165

105 105 135 135 135 155 155 155 135 135 135 155 155 155 95 95 95 95

25 25 75 75 75 95 95 95 65 65 65 90 90 90 20 20 20 20 30 65 65 65 65 85 85 85 85 55 55 55 75 75 75 75 35 35 35 85 85 85 120 120 120 75 75 75 110 110 110 40 40 105 105 130 130 105 105 120 120 35 35 35 95 95 95 120 120 120 80 80 80 110 110 110 65 65 65 65

125 125 125 125 145 145 145 145 125 125 125 145 145 145 145 130 130 130 155 155 155 180 180 180 155 155 155 180 180 180 155 155 180 180 200 200 180 180 200 200 145 145 145 165 165 165 185 185 185 165 165 165 185 185 185 215 215 215 215

Max.

* They also contain values of bend radius and hardness following sampling and test methods as described in EN 485-1. These values are for information only.

56

Bending radius*

Brinell­ hardness HBS*

A50 mm 21 24 4 5 6 3 4 5 5 6 10 4 5 7 22 26 29 35 20 4 5 7 9 3 4 5 6 5 6 11 4 5 8 8 19 21 24 4 5 6 2 3 4 7 8 9 4 5 6 15 17 4 4 2 2 6 7 4 5 19 20 22 2 4 5 2 3 4 5 6 8 4 5 6 14 16 18 19

A

180˚ 0t 0t 0.5t 0.5t 1.0t 1.0t 1.0t 1.5t 0.5t 0.5t 1.0t 1.0t 1.0t 0t 0t 0.5t 1.0t 0.5t 0.5t 1.0t 1.0t 1.0t

0.5t 0.5t 1.0t 1.0t 1.0t 1.5t 0t 0t 1.0t 1.5t 1.5t 2.0t 2.0t 1.0t 1.0t 1.5t 1.5t

90˚ 0t 0t 0t 0.5t 1.0t 0.5t 1.0t 1.5t 0t 0.5t 1.0t 0.5t 1.0t 1.5t 0t 0t 0.5t 1.0t 0t 0.5t 1.0t 2.0t 0.5t 1.0t 1.5t 2.5t 0t 0.5t 1.0t 0.5t 1.0t 1.5t 2.5t 0t 0t 1.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t

0t 0.5t 1.5t 1.5t 2.5t 2.5t

2.5t 2.5t 0t 0.5t 1.0t 1.0t 1.5t 2.0t 2.0t 1.0t 1.5t 1.5t 2.0t 0t 0.5t

0t 0t 1.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t 0t 0.5t 1.0t 2.0t

23 31 31 31 37 37 37 30 30 30 37 37 37 20 20 20 20 23 28 28 28 28 34 34 34 34 27 27 38 33 33 33 33 27 27 27 36 36 36 45 45 45 36 36 36 44 44 44 29 29 41 41 48 48 41 41 47 47 29 29 29 39 39 39 48 48 48 38 38 38 47 47 47 47 47 47 46

More information on page 57


Aluminium Sheets/Plates EN 485-2: 2008 Mechanical Properties Alloy

Temper

Thickness

Tensile strength

Proof stress

Elongation

mm

Rm MPa

Rp0.2 MPa

min. %

above EN AW-5052 AlMg2.5

H112

H12

H14

H22/H32

H24/H34

EN AW-5754 AlMg3

O/H111

H112

H12

H14

H22/H32

H24/H34

EN AW-5083 AlMg4.5Mn0.7

O/H111

H112

H116

H12

H14

H22/H32

H24/H34

(extraction)

12.5 > _6.0 12.5 40.0 0.2 0.5 1.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 12.5 > _6.0 12.5 25.0 40.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 12.5 50.0 80.0 120.0 > _6.0 12.5 40.0 > _1.5 3.0 6.0 12.5 40.0 0.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0

to 80 12.5 40.0 80.0 0.5 1.5 3.0 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 100.0 12.5 25.0 40.0 80.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 50.0 80.0 120.0 150.0 12.5 40.0 80.0 3.0 6.0 12.5 40.0 80.0 1.5 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5

Min.

Max.

Min.

165 190 170 170 210 210 210 210 210 210 230 230 230 230 210 210 210 210 230 230 230 230 190 190 190 190 190 210 200 190 190 220 220 220 220 240 240 240 240 220 220 220 220 240 240 240 240 275 275 275 275 275 270 260 255 275 275 270 305 305 305 305 285 315 315 315 340 340 340 340 305 305 305 305 340 340 340 340

215

65 110 70 70 160 160 160 160 160 160 180 180 180 180 130 130 130 130 150 150 150 150 80 80 80 80 80 140 120 80 80 170 170 170 170 190 190 190 190 130 130 130 130 160 160 160 160 125 125 125 125 125 115 110 105 125 125 115 215 215 215 215 200 250 250 250 280 280 280 280 215 215 215 215 250 250 250 250

260 260 260 260 260 260 280 280 280 280 260 260 260 260 280 280 280 280 240 240 240 240 240

270 270 270 270 280 280 280 280 270 270 270 270 280 280 280 280 350 350 350 350 350 345

375 375 375 400 400 400 400 380 380 380 380 400 400 400 400

Max.

* They also contain values of bend radius and hardness following sampling and test methods as described in EN 485-1. These values are for information only.

Bending radius*

Brinell­ hardness HBS*

A50 mm

A

180˚

90˚

18 7 10 14 4 5 6 6 8 10 3 4 4 5 6 7 10 12 5 6 7 9 14 16 18 18

1.5t 1.5t

2.0t 2.0t

0.5t 1.0t 1.0t

1.0t 1.5t 1.5t 2.5t 1.5t 2.0t 2.5t 3.0t 0.5t 1.0t 1.0t 2.0t

17 12 10 12 14 5 6 7 9 3 4 4 5 8 10 11 10 6 7 8 10 12 13 15 16

1.5t 2.0t

2.5t 2.5t

1.0t 1.5t

1.0t 1.5t 1.5t 2.5t 1.5t 2.0t 2.5t 3.0t 1.0t 1.0t 1.5t 2.5t

15 14 12 12 12 10 10 8 10 12

3.0t

2.0t 2.5t 4.0t

2.0t 3.0t

1.5t 2.0t 2.5t 3.5t 2.0t 2.5t 3.5t 4.5t

10 10 4 6 7 3 3 3 6 7 8 10 5 6 7 8

46 55 47 47 63 63 63 63 63 63 69 69 69 69 61 61 61 61 67 67 67 67 52 52 52 52 52 62 58 52 52 66 66 66 66 72 72 72 72 63 63 63 63 70 70 70 70 75 75 75 75 75 73 70 69 75 75 73 89 89 89 89 83 94 94 94 1020 1020 1020 1020 89 89 89 89 99 99 99 99

More information on page 58

57


Technical Information

Aluminium Sheets/Plates EN 485-2: 2008 Mechanical Properties Alloy

Temper

Thickness

Tensile strength

Proof stress

Elongation

mm

Rm MPa

Rp0.2 MPa

min. %

above EN AW-6082 AlSiMgMn

O

T4/T451

T451 T42

T6/T651/T62

T651/T62

T61/T6151

T6151

EN AW-7020 AlZn4.5Mg1

O

T4/T451

T6/T651/T62

T651

EN AW-7075 AlZn5.5MgCu

O

T62

T651/T62

T76/T7651

(extraction)

> _0.4 1.5 3.0 6.0 12.5 > _0.4 1.5 3.0 6.0 12.5 40.0 > _0.4 1.5 3.0 6.0 12.5 40.0 > _0.4 1.5 3.0 6.0 12.5 60.0 100.0 150.0 > _0.4 1.5 3.0 6.0 12.5 60.0 100.0 150.0 > _0.4 1.5 3.0 6.0 > _0.4 1.5 3.0 6.0 > _0.4 1.5 3.0 6.0 12.5 40.0 100.0 150.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 25.0 50.0 60.0 80.0 90.0 100.0 120.0 > _1.5 3.0 6.0

to 1.5 3.0 6.0 12.5 25.0 1.5 3.0 6.0 12.5 40.0 80.0 1.5 3.0 6.0 12.5 40.0 80.0 1.5 3.0 6.0 12.5 60.0 100.0 150.0 175.0 1.5 3.0 6.0 12.5 60.0 100.0 150.0 175.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 40.0 100.0 150.0 175.0 3.0 6.0 12.5 75.0 3.0 6.0 12.5 25.0 50.0 60.0 80.0 90.0 100.0 120.0 150.0 3.0 6.0 12.5

Min.

Max.

Min.

150 150 150 150 155 205 205 205 205 205 205 205 205 205 205 205 205 310 310 310 300 295 295 275 275 280 280 280 280 275 275 275 275

85 85 85 85

14 16 18 17

A

12 14 15 14

180˚

90˚

1.0t 1.0t

0.5t 1.0t 1.5t 2.5t

3.0t 3.0t

1.5t 2.0t 3.0t 4.0t

13 12 12 14 15 14

1.5t 2.0t 3.0t 4.0t 13 12

6 7 10 9

2.5t 3.5t 4.5t 6.0t 8 7 6 4

10 11 11 12

2.0t 2.5t 4.0t 5.0t 12 10 9 8

140 140 140 140 210 210 210 210 280 280 280 280 280 270 260 260

275 275 275 275 540 545 540 540 530 525 495 490 460 410 360 500 500 490

A50 mm

16

220 220 220 220

12 13 15 12 11 12 13 14 7 8 10 10

2.0t 2.5t 3.5t 5.0t 3.5t 4.0t 5.5t 8.0t 9 8 7 6

145 145 145

10 10 10

3.0t

1.0t 2.5t 4.0t

9 470 475 460 470 460 440 420 390 360 300 260 425 425 415

Brinell­ hardness* HBS

Max.

110 110 110 110 110 110 95 95 95 95 95 95 260 260 260 255 240 240 240 230 205 205 205 205 200 200 200 200

320 320 320 320 350 350 350 350 350 340 330 330

Bending radius*

7 8 8

6.5t 8.0t 12t 6 5 4 4 4 3 2 2

7 8 7

40 40 40 40 40 58 58 58 58 58 58 57 57 57 57 57 57 94 94 94 91 89 89 84 83 82 82 82 82 81 81 81 81 45 45 45 45 92 92 92 92 104 104 104 104 104 101 98 98 55 55 55 55 161 163 160 161 158 155 147 144 135 119 104 149 149 146

* They also contain values of bend radius and hardness following sampling and test methods as described in EN 485-1. These values are for information only.

58


Aluminium Bars - Extruded EN 755-2: 2008 Mechanical Properties Alloy

Temper

Extruded profiles

Round bardiameter

e (3) (10) mm above EN AW-1050A Al99,5 EN AW-2007 AlCu4PbMgMn EN AW-2011 AlCu6BiPb

EN AW-2014 AlCu4SiMn

to

F, H112 (4) O, H111 T4, T4510, T4511 (5) T4, T4510, T451 (5) T4, T4510, T451 (5) T4 (5) T6 (5) T6 (5) T6 (5) O, H111 T4, T4510, T4511 T4, T4510, T4511 T4, T4510, T4511 T4, T4510, T4511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 O, H111 T4, T4510, T4511 T6, T4510, T6511 T6, T4510, T6511

O, H111 T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) O, H111 T4, T4510, T4511 (5) T4, T4510, T4511 (5) En AW-2024 O, H111 AlCu4Mg1 T3, T3510, T3511 T3, T3510, T3511 T3, T3510, T3511 T3, T3510, T3511 T8, T8510, T8511 O, H111 T3, T3510, T3511 T8, T8510, T8511 EN AW-5754 F, H112 (4) AlMg3 F, H112 (4) O, H111 EN AW-5083 F, (4) AlMg4.5Mn0.7 F, (4) O, H111 O, H112 F, (4) O, H111 O, H112 T4 (5)(Å) T6 (5) T6 (5)(Å) T6 (5)(Å) T6 (5)(Å) T4 (5)(H) T6 (5)(H) T6 (5)(H) T6 (5) T6 (5) T6 (5) T6 (5)

Extruded round bars

S (2) mm

e (3) mm

to

above

all all

En AW-2017A AlCu4MgSi(A)

EN AW-6005 AlSiMg

Dimensions square hexagonal bars

D (1) mm above

to

0 80 200 0 0 -

80 200 250 60 60 -

0 0 25 75 150 0 25 75 150 200

200 25 75 150 200 25 75 100 200 250

0 0 25 75 150 0 25 75 150 200

200 25 75 150 200 25 75 150 200 250

0 150 0 0 200 0 0

200 25 75 150 200 250

200 50 100 200 250 150

150 250 150 200 250 200 200

0 0 25 75 150 200

0 0 50 100 200 0

0 150 0 0 200 0 0

to

all all

80 200 250 200 75 200

0 0 50 100 200 0

above

all all

0 80 200 0 0 75

0 0 25 75 150 200

(extraction)

0

25

0

25

0 0 0 10

20 20 10

200 25 75 150 200 250 0 0 10

20 10 75

0 0 0 0

30 30 30 25

200 50 100 200 250 150

150 250 150 200 250 200 200

0

25 all all all all all all

0

25

0 5 10 0 0 5

5 10 25 10 5 15

25

50

25

50

0 50

25 100

0 50

25 100 0 5

5 10

Tensile strength

0.2% Proof stress

Rm

Rp 0.2

N/mm2

N/mm2

Elongation

A50 mm

A

% min.

% min.

Min.

Max.

Min.

Max.

60 60 370 340 330 275 310 295 310 370 410 390 350 415 460 465 430 420 370 415 40

95 250 250 450

20 20 250 220 210 125 230 195 230 230 270 250 230 370 415 420 350 320 230 370 -

135 135 400

25 25 8 8 7 14 8 6 6 12 13 12 10 8 6 7 7 6 5 12 11 7 -

23 23 6 12 6 4 10 11 5 10 10 5 6

380 400 390 370 360 380 400 450 440 420 400 455 420 455 180 180 180 270 260 270 270 270 270

250 250 250 250 250 -

260 270 260 240 220 260 270 310 300 280 270 380 290 380 80 70 80 110 110 110 125 110 110

135 135 150 150 -

12 12 10 9 8 7 12 12 10 12 8 8 8 8 5 12 8 5 14 13 17 12 12 14 12 12 14

10 10 10 10 8 10 6 4 10 6 4 12 15 10 12 10 10 12

270 180 270 270 260 250 180 255 250 270 260 270 260

-

125 90 225 225 215 200 90 215 200 225 215 225 215

-

12 15 8 8 8 8 15 8 8 10 8 8 8

10 13 6 6 6 13 6 6 8 6 6

(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (4) F-Condition: The mechanical properties are only intended as a guide. (5) The properties can only be reached by shock cooling. 10) When a profile’s cross section consists of different wall thicknesses with different mechanical properties, the lowest specified value must be considered as the effective value for the whole profile.

Å = Open profile H = Hollow profile

More information on page 60

59


Technical Information

Aluminium Bars - Extruded EN 755-2: 2008 Mechanical Properties Alloy

Temper

Extruded profiles

Round bardiameter

e (3) (10) mm above EN AW-6012 Al MgSiPb EN AW-6060 Al MgSi 0.5

EN AW-6061 Al Mg1SiCu

EN AW-6082 AlSi1MgMn

EN AW-6262 AlMg1SiPb EN AW-6262R AlMg1SiPb En AW-7020 AlZn4.5Mg1

T6, T6510, T6511 (5) T6, T6510, T6511 (5) T4 (5) T5 T5

to

(extraction)

Dimensions square hexagonal bars

Extruded round bars

S (2) mm

e (3) mm

D (1) mm

Tensile strength

0.2% Proof stress

Rm

Rp 0.2

N/mm2

N/mm2

A50 mm

A % min.

to

above

to

Min.

Max.

Min.

Max.

% min.

0 150 0 0

150 200 150 150

0 150 0 0

150 200 150 150

0

30

0 0

15 15

310 260 120 160 140

-

260 200 60 120 100

-

8 8 16 8 8

6 14 6 6

0

150

0

150

0

15

0 0

50 150

0 0

50 150

0 0

15 15

0 0 0

200 200 200

0 0 0

200 200 200 0 0 0 5 0

25 25 5 25 25

0 0

25 5

5

25

190 170 180 215 195 180 260 180 260 260 205 270 290 310 310 205 295 310 280 270 310

150 150 160 -

150 140 120 160 150 110 240 110 240 240 110 230 250 260 260 110 250 260 240 200 260

110 110 110 -

8 8 12 8 8 16 15 8 16 15 8 10 14 14 8 8 10 10 14 8 8 6 6 10

6 6 10 6 6 14 13 6 14 13 6 8 12 12 6 6 8 8 12 6 8

above

to

above

0 0 5

25 5 25

T6 (5) T6 (5) T64 (5) (8) T66 (5) T66 (5) O, H111 T4 (5) T6 (5) O, H111 T4 (5) T6 (5) T6 (5) O, H111 T4 (5) T5 (Å+H) T6 (5)(Å+H) T6 (5)(Å) T6 (5)(H) T4 (5) T6 (5) T6 (5) T6 (5) T6 (5) T6 (5)

0 3 0 0 3

3 25 15 3 25

T6 (5)

0

25

0

200

0

200

0

25

260

-

240

-

10

8

0

25

0 0 50

200 50 200

0 0 50

200 50 200

0

25

0 80 0 0 25 100

80 200 200 25 100 150

0 80 0 0 25 100

80 200 200 25 100 150

0 0

15 30

260 350 340 350 490 470 540 560 530

275 -

240 290 275 290 420 400 480 500 470

165 -

10 10 10 10 7 7 10 7 7 6

8 8 8 5 8 5 -

T6, T6510, T6511 T73, T73510, T7351 (9)

150 0

200 25

150 0

200 25

470 485

-

400 420

-

5 7

5

T73, T73510, T7351 (9) T73, T73510, T7351 (9) T73, T73510, T7351 (9) O, H111 T6, T6510, T6511 T6, T6510, T6511 T6, T6510, T6511 T73, T73510, T7351 (9)

25 75 100

75 100 150

25 75 100

75 100 150

275 -

405 390 360 485 505 495 400

165 -

7 6 6 10 8 7 6 7

6 5 4 5

-

420

-

8

6

T6 (5) T6 (5) T6 (5) T6 (5) EN AW-7022 T6, T6510, T6511 (5) Al Zn5Mg3Cu T6, T6510, T6511 (5) EN AW-7075 O, H111 Al Zn 5.5MgCu T6, T6510, T6511 T6, T6510, T6511 T6, T6510, T6511

T73, T73510, T7351 (9)

all 0 0 0 5 5

0

200

0

200

0 0 20 150 200

200 20 150 200 250

0 0 20 150 200

200 20 150 200 250

25 5 5 25 15

0 0 5 10 0

10 5 10 50 5

475 470 440 540 560 560 470

5

25

485

(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (5) The properties can only be reached by shock cooling. (8) Bending quality. (9) Referring to supplement A and supplement B for material in this condition. (10)When a profile’s cross section consists of different wall thicknesses with different mechanical properties, the lowest specified value must be considered as the effective value for the whole profile.

60

Elongation

Å = Open profile H = Hollow profile


Aluminium Bars - Drawn EN 754-2: 2008 (extraction) Mechanical Properties Alloy

Temper

Material no.

Round bardiameter

Dimensions square hexagonal bars

Drawn tube

S (2) mm

e (3) mm

D (1) mm EN AW-2007 AlCu4PbMgMn

EN AW-2011 AlCu6BiPb

EN AW-6012 AlMgSiPb EN AW-6061

T3 (4) T3 (4) T351 (4) T3 (4) T3510, T3511 (4) T3 T3 T3 T8 T3 T3 T8 T4 (4) T6 (4) O, H111

AlMg1SiCU

T4 (4) T6 (4) T6 (4) T8 (4) T9 (4) T6 (4) T8 (4) T9 (4) O, H111 T4 (4) 3.2315.71 T6 (4) T6 (4)

EN AW-6262R AlMg1SiPb EN AW-6262 AlMg1SiPb EN AW-6082 AlSiMgMn T6 (4)

3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53

above

to

above

to

0 30 0

30 80 80

0 30 0

30 80 80

0 40 50 0

40 50 80 80

0 40 50 0

40 50 80 80

above

3.1645.53 3.1645.53 3.0615.51 3.0615.71 3.3211.10

0 0 0

80 80 80

0 0 0

80 80 80

3.3211.51 3.3211.71

0 0 0 0 0 0 0 0 0 0 0

80 80 80 50 50 80 50 50 80 80 80

0 0 0 0 0 0 0 0 0 0 0

80 80 80 50 50 80 50 50 80 80 80

3.2315.10 3.2315.51 3.2315.71 3.2315.71

to

0 0

20 20

0 5 0 0 0 0

5 20 20 20 20 20

0 0 0 0 0 0 0 0 0 0

20 20 20 10 10 20 10 10 20 20

0 5

5 20

Tensile strength

0.2% Proof stress

Rm

Rp 0.2

N/mm2

N/mm2

Elongation

A50 mm

A

% min.

% min.

Min.

Max.

Min.

Max.

370 340 370 370 370 320 300 280 370 310 290 370 200 310 -

150

250 220 250 250 250 270 250 210 270 260 240 275 100 260 -

110

7 6 5 7 5 10 10 10 8 10 8 8 10 8 16

5 3 5 3 8 6 8 6 6 8 6 14

205 290 290 345 360 290 345 360 205 310 310 310

110 -

110 240 240 315 330 240 315 330 110 255 255 240

110 -

16 10 10 4 4 10 4 4 15 14 10 8 10

14 8 8 3 3 8 3 3 13 12 9 7 9

(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (5) The properties can only be reached by shock cooling. (4) P  roperties may be obtained by press quenching.

Tolerances for Extruded Flat Profiles EN 755-5: 2008 Alloy group I: EN AW-1050A – EN AW-1350 – EN AW-6005 – EN AW-6012 – EN AW-6026 – EN AW-6082 – EN AW-6262 – EN AW-6262R

from above above above above above above above above above

Width

Tolerance

mm

mm

10 18 30 50 80 120 180 240 350 450

to to to to to to to to to to

18 30 50 80 120 180 240 350 450 600

±0.25 ±0.30 ±0.40 ±0.60 ±0.80 ±1.0 ±1.4 ±1.8 ±2.2 ±3.0

Thickness

Alloy group I

2<t<6

6<t<10

10<t<18

18<t<30

30<t<50

50<t<80

80<t<120

±0.20 ±0.20 ±0.25 ±0.25 ±0.30 ±0.40 -

±0.25 ±0.25 ±0.25 ±0.30 ±0.35 ±0.45 ±0.55 ±0.65 -

±0.25 ±0.30 ±0.30 ±0.35 ±0.40 ±0.50 ±0.60 ±0.70 ±0.80 -

±0.30 ±0.35 ±0.40 ±0.45 ±0.55 ±0.65 ±0.75 ±0.85 -

±0.40 ±0.50 ±0.60 ±0.60 ±0.70 ±0.80 ±0.90 ±0.90

±0.60 ±0.70 ±0.70 ±0.80 ±0.90 ±1.0 ±1.0

±0.80 ±0.90 ±1.0 ±1.1 ±1.2 ±1.4

120<t<180 180<t<240 ±1.0 ±1.1 ±1.3 ��1.4 -

±1.4 ±1.5 ±1.6 -

Tolerances for Extruded Flat Profiles EN 755-5: 2008 Alloy group II: EN AW-2007/ EN AW-2011/ EN AW-7075

from above above above above above above above above above

Width

Tolerance

mm

mm

10 18 30 50 80 120 180 240 350 450

to to to to to to to to to to

18 30 50 80 120 180 240 350 450 600

±0.35 ±0.40 ±0.50 ±0.70 ±1.0 ±1.4 ±1.8 ±2.2 ±2.8 ±3.5

Thickness

Alloy group II

2<t<6

6<t<10

10<t<18

18<t<30

30<t<50

50<t<80

±0.25 ±0.25 ±0.30 ±0.30 ±0.35 ±0.45 -

±0.30 ±0.30 ±0.30 ±0.35 ±0.40 ±0.50 ±0.60 ±0.70 -

±0.35 ±0.40 ±0.40 ±0.45 ±0.50 ±0.55 ±0.65 ±0.75 ±0.90 -

±0.40 ±0.50 ±0.60 ±0.60 ±0.70 ±0.70 ±0.80 ±1.0 -

±0.50 ±0.70 ±0.70 ±0.80 ±0.90 ±0.90 ±1.1 ±1.2

±0.70 ±0.80 ±1.0 ±1.1 ±1.2 ±1.4 ±1.4

80<t<120 ±1.0 ±1.1 ±1.3 ±1.4 ±1.8 ±1.8

120<t<180 180<t<240 ±1.4 ±1.6 ±1.7 ±2.1 -

±1.8 ±1.9 ±2.3 -

61


Technical Information

Tolerances for Drawn Square, Hexagonale and Round Bars according to EN 754-4: 2008 Alloy: EN AW-2007 / EN AW-2011 / EN AW-2014 / EN AW-6012 / EN AW-6026 / EN AW-6060/6063 / EN AW-6082 / EN AW-6262 / EN AW-6262R / EN AW-7075

Dimension area

from above above above above above

3 10 10 18 30 50

to to to to to to

6 10 18 30 50 65

Square Bars

Hexagonal Bars

Round Bars

Limit measurement (permitted deviations)

Limit measurement (permitted deviations)

Limit measurement (permitted deviations)

0 0 0 0 0 0

to to to to to to

-0.08 -0.09 -0.11 -0.13 -0.16 -0.19

0 0 0 0 0 0

to to to to to to

-0.08 -0.09 -0.11 -0.13 -0.16 -0.19

0 0 0 0 0 0

to to to to to to

-0.08 -0.09 -0.11 -0.13 -0.16 -0.19

Tolerances for Extruded Square, Hexagonale and Round Bars according to EN 754-4: 2008 Alloy group:

I = EN AW-6060/6063 / EN AW-6082 / EN AW-6012 / EN AW-6026 / EN AW-6262 / EN AW-6262R II = EN AW-2007/ EN AW- 2011/ EN AW-2014/ EN AW-7075

Dimension area

from from above above above above above above above above above above above above

62

8 10 18 25 40 50 65 80 100 120 150 180 220 270

to to to to to to to to to to to to to to

18 18 25 40 50 65 80 100 120 150 180 220 270 320

Square Bars

Hexagonal Bars

Alloy group I II

Alloy group I II

±0.22 ±0.25 ±0.30 ±0.35 ±0.40 ±0.45 ±0.55 ±0.65 ±0.80 ±1.00 ±1.15

±0.30 ±0.35 ±0.40 ±0.45 ±0.50 ±0.70 ±0.90 ±1.00 ±1.20 ±1.40 ±1.70

±0.22 ±0.25 ±0.30 ±0.35 ±0.40 ±0.45 ±0.55 ±0.65 ±0.80 ±1.00 ±1.15

±0.30 ±0.35 ±0.40 ±0.45 ±0.50 ±0.70 ±0.90 ±1.00 ±1.20 ±1.40 ±1.70

Round Bars Alloy group I II ±0.22

±0.30

±0.25 ±0.30 ±0.35 ±0.40 ±0.45 ±0.55 ±0.65 ±0.80 ±1.00 ±1.50 ±1.30 ±1.60

±0.35 ±0.40 ±0.45 ±0.50 ±0.70 ±0.90 ±1.00 ±1.20 ±1.40 ±1.70 ±2.00 ±2.50


Width thickness tolerances for Cold-rolled Sheets/Plates according to EN 485-4: 2008 Alloy group: I = EN AW-1050A/ EN AW-3003/ EN AW-5005 II = EN AW-5052/ EN AW-5754 / EN AW-5083/ EN AW-6082 / EN AW-7075

Thickness mm above 0.2 0.4 0.5 0.6 0.8 1 1.2 1.5 1.8 2 2.5 3 3.5 4 5

I

to 0.4 0.5 0.6 0.8 1 1.2 1.5 1.8 2 2.5 3 3.5 4 5 6

above 1000 above 1250 above 1600 above 2000 above 2500 above 3000 to 1250 mm to 1600 mm to 2000 mm to 2500 mm to 3000 mm to 3500 mm

to 1000 mm II

I

±0.02 ±0.03 ±0.03 ±0.03 ±0.03 ±0.04 ±0.03 ±0.04 ±0.04 ±0.05 ±0.04 ±0.05 ±0.05 ±0.07 ±0.06 ±0.08 ±0.06 ±0.09 ±0.07 ±0.10 ±0.08 ±0.11 ±0.10 ±0.12 ±0.15 ±0.18 ±0.20

II

I

±0.04 ±0.05 ±0.04 ±0.05 ±0.05 ±0.06 ±0.06 ±0.07 ±0.06 ±0.08 ±0.07 ±0.09 ±0.09 ±0.11 ±0.10 ±0.12 ±0.11 ±0.13 ±0.12 ±0.14 ±0.13 ±0.15 ±0.15 ±0.17 ±0.20 ±0.22 ±0.24

II

±0.05 ±0.06 ±0.05 ±0.06 ±0.06 ±0.07 ±0.07 ±0.08 ±0.08 ±0.09 ±0.09 ±0.10 ±0.10 ±0.12 ±0.11 ±0.13 ±0.12 ±0.14 ±0.13 ±0.15 ±0.15 ±0.17 ±0.17 ±0.19 ±0.22 ±0.24 ±0.25

I

II

±0.06 ±0.07 ±0.07 ±0.08 ±0.08 ±0.09 ±0.09 ±0.10 ±0.10 ±0.12 ±0.11 ±0.14 ±0.12 ±0.15 ±0.14 ±0.16 ±0.15 ±0.17 ±0.17 ±0.19 ±0.18 ±0.20 ±0.23 ±0.25 ±0.26

I

II

I

±0.10 ±0.11 ±0.12 ±0.13 ±0.14 ±0.16 ±0.17 ±0.19 ±0.20 ±0.23 ±0.24 ±0.25 ±0.29 ±0.32

II ±0.34 ±0.36 ±0.40

I

II ±0.38 ±0.42 ±0.46

Width thickness tolerances for Hot-rolled Sheets/Plates according to EN 485-3: 2008 Thickness mm above to 2.5 4 5 6 8 10 15 20 30 40 50 60 80 100 150

4 5 6 8 10 15 20 30 40 50 60 80 100 150 200

to 1250 mm ±0.28 ±0.30 ±0.32 ±0.35 ±0.45 ±0.50 ±0.60 ±0.65 ±0.75 ±0.90 ±1.10 ±1.40 ±1.70 ±2.20 ±2.80

above 1250 mm above 1600 mm above 2000 mm above 2500 mm to 1600 mm to 2000 mm to 2500 mm to 3500 mm ±0.28 ±0.30 ±0.32 ±0.40 ±0.50 ±0.60 ±0.70 ±0.75 ±0.85 ±1.00 ±1.20 ±1.50 ±1.80 ±2.20 ±2.80

±0.32 ±0.35 ±0.40 ±0.40 ±0.50 ±0.65 ±0.75 ±0.85 ±1.00 ±1.10 ±1.40 ±1.70 ±1.90 ±2.70 ±3.30

±0.35 ±0.40 ±0.45 ±0.50 ±0.55 ±0.65 ±0.80 ±0.90 ±1.10 ±1.20 ±1.50 ±1.90 ±2.10 ±2.80 ±3.30

±0.40 ±0.45 ±0.50 ±0.55 ±0.60 ±0.80 ±0.90 ±1.00 ±1.20 ±1.50 ±1.70 ±2.00 ±2.20 -

Valid for alloy groups I & II

63


Profile Tolerances

Tolerance relative to the generic dimension Generic diemension H

S

Diameter of the circumscribed circel D

<

D ≤ 100

100 <D≤200

200 <D≤300

300 <D≤500

500 <D≤800

10 25 50 100 150 200 300 450

10 25 50 100 150 200 300 450 600

±0,25 ±0,30 ±0,50 ±0,70 -

±0,30 ±0,40 ±0,60 ±0,90 ±1,10 ±1,30 -

±0,35 ±0,50 ±0,80 ±1,10 ±1,30 ±1,50 ±1,70 -

±0,40 ±0,60 ±0,90 ±1,30 ±1,50 ±1,80 ±2,10 ±2,80 ±3,80

±0,50 ±0,70 ±1,10 ±1,50 ±1,70 ±2,00 ±2,40 ±3,00 ±4,20

H

Tolerance related to wall thickness Related thickness S

Diameter of the circumscribed circel D

<

D ≤ 100

100 <D≤200

300 <D≤500

500 <D≤800

1,5 3 6 10 15 20 30 40

1,5 3 6 10 15 20 30 40 50

±0,20 ±0,25 ±0,40 ±0,60 ±0,80 ±1,20 ±1,50 -

±0,30 ±0,40 ±0,60 ±0,80 ±1,00 ±1,50 ±1,80 ±2,00 -

±0,60 ±0,80 ±1,00 ±1,20 ±1,70 ±2,00 ±2,20 -

±0,80 ±1,00 ±1,20 ±1,50 ±2,00 ±2,50 ±2,70 -

Tolerance related to wall thickness For right angles Width W > 30 50 80 120 180 240 300

≤ 30 50 80 120 180 240 300 400

64

Z

Deviation from straight line Z

0,4 0,7 1,0 1,4 2,0 2,6 3,1 3,5

W


Straigthness tolerances The tolerance on the straigthness line h must be less than or equal to 1,5 mm/m of the lenght. Localised differences from the straight line must not exceed 0,6 mm/m

Flatness tolerances Width b >

30 60 100 150 200 300 400 500

30 60 100 150 200 300 400 500 600

Difference from the flatness p Hollow extruded products

Open extruded products

Wall thickness t ≤5

>5 0,2 0,3 0,4 0,6 0,8 1,2 1,6 2,0 2,4

0,3 0,4 0,6 0,9 1,2 1,8 2,4 3,0 3,6

0,2 0,3 0,4 0,6 0,8 1,2 1,6 2,0 2,4

Twisting tolerances Width b

Tolerances on twisting t

>

On the length 1000 mm

30 50 100 200 300 450

30 50 100 200 300 450 600

1,2 1,5 2,0 2,5 2,5 3,0 3,5

On the total length L 1000 < L ≤ 6000

L > 6000

2,5 3,0 3,5 5,0 6,0 8,0 9,5

3,0 4,0 5,0 7,0 8,0 1,5xL (in mm)

65


Technical Information / Reference Table

Aluminium Properties - EN 485-2: 2008 Alloy

Min. Proof stress Rp 0.2

Min. Tensile strength Rm

(N/mm2) (N/mm2)

5754 H111 5083 H111 6082 T651 2017A T4 2024 T3 2014 T651 7020 T651 7022 T651 7075 T651 7050 Hokotol

80 125 240 245 290 400 270 350 440 532

190 275 295 390 440 460 340 430 525 757

Min. Elon­ gation A5%

12 12 8 12 13 6 8 5 4 7.8

Brinell­ Spec. Thermal Coefficient Weldability hard- weight conduc­ of thermal ness tivity expansion HBS

g/cm3

cm x K W/cmxK (20-100˚C)

52 75 89 110 110 133 101 127 155 180

2.66 2.66 2.70 2.80 2.77 2.80 2.77 2.78 2.80 2.83

1.3-1.7 1.1-1.2 1.5-1.9 1.3-1.7 1.3-1.7 1.6 1.2-1.6 1.3-1.5 1.3-1.6 1.54

23.7 23.8 23.4 22.8 22.8 23.0 23.0 23.6 23.3 23.5

Annealing

Fusingpoint/ interval

cm/106 x ˚C

330-360 330-400 350-400 350-400 350-400 350-400 350-400 ----

610-640 580-640 585-650 512-650 505-640 510-640 580-650 515-640 500-640 560-600

excellent excellent good bad bad bad good bad bad bad

Elastic- Electrical modulus conduc­ tivity at 20˚ ohmmm2 KN/mm2

70 71 70 72 73 72 70 71 72 70.3

18-23 17 24-32 21-28 18-26 23-29 18-24 17-19 17-20 23

The indicated numbers are guidelines only.

Aluminium Material Abbreviation: Germany DIN Al 99.5 Al 99.7 Al 99.8 Al 99.0 E-Al 99.5 AlCuMgPb AlCuBiPb AlCuSiMn AlCuMg 1 AlCuMg 2 AlMn AlMg1 AlMg2.5 AlMg5 AlMg 4.5 Mn AlMg3 AlMgSi0.7 AlMgSiPb AlMgSi0.5 AlMg1SiCu AlMgSi1 AlZn 4.5 Mg 1 AlZnMgCu 0.5 AlZnMgCu 1.5

66

Material ISO / no. EN-norm 3.0255 3.0275 3.0285 3.0205 3.0257 3.1645 3.1655 3.1255 3.1325 3.1355 3.0515 3.3315 3.3523 3.3555 3.3547 3.3535 3.3210 3.0615 3.3206 3.3211 3.2315 3.4335 3.4345 3.4365

1050A 1070A 1080A 1200 1350A 2007 2011 2014 2017A 2024 3003 5005 5052 5056 5083 5754 6005 6012 6060/63 6061 6082 7020 7022 7075

USA

UK BS

1050A 1070A 1080A 1200 1350A 2007 2011 2014 2017A 2024 3003 5005 5052 5056 5083 5754 6005 6012 6060/63 6061 6082 7020 7022 7075

1B 1A 1C 1E FC1 H14 H16 N3 N4 N6 N8 N5 H9 H20 H30 H17 2L95

France NF

Spain UNE

Italy UNI

Sweden SIS

A5 A7 A8 A4 A5L A-U4Pb A-U 4Pb A-U4G A-U4G1 A-G5 5083 A-G3M A-GS A-SGM 0.7 A-Z5G A-Zn5 GU 0.6 A-Zn5 GU

L3051 L3052 L3121 L3192 L3120 L3321 L3390 L3441 L3451 L3741 L3710

4507 6362 3576 7790 3575 3569 3571 7791 3735

4007 4005 4004 4010 4008 4335 4355 4338 4054 4106 4120 4140 4125 4107 4104 4212 4425 -


Reference Table DIN-standard / EN-standard Approximate comparison, as EN-standard cannot replace DIN-standard.

Type Al99.5 EN AW-1050A AlMg3 EN AW-5754 AlMg4.5Mn EN AW-5083 AlMgSi1 EN AW-6082 AlZnMgCu1.5 EN AW-7075 AlMg1 EN AW-5005 Tread Plate AlMg3 EN AW-5754 Round Bars Square Bars Hexagonal Bars

Alloy

Tolerances DIN EN

Properties DIN EN

DIN

EN

K V K V K V K V K

1712

573-3

1745

485-1/2

1725

573-3

1745

485-1/2

1725

573-3

1745

485-1/2

1725

573-3

1745

485-1/2

1725

573-3

1745

485-1/2

K

1725

573-3

1745

485-1/2

1725

573-3

59605

1386

1725

573-3

1747

1725

573-3

1747

1725

573-3

1747

1725 1725 1725 1725 1725 1725

573-3 573-3 573-3 573-3 573-3 573-3

1747 1748 1748 1746 1746 1748

754-1/2 755-1/2 754-1/2 755-1/2 754-1/2 755-1/2 755-1/2 755-1/2 755-1/2 755-1/2 755-1/2 755-1/2

1798 1799 1796 59700 1797 59700 1770 1771 9713 9714 9107 1748

754-3 755-3 755-4 755-4 754-6 755-6 755-5

Drawn Extruded Drawn Extruded Drawn Extruded

Flat Profiles Angle Profiles U-Profiles T-Profiles Round Tubes Square Tubes

1783 59600 1783 59600 1783 59600 1783 59600

485-4 485-3 485-4 485-3 485-4 485-3 485-4 485-3

59600

485-3

1783

485-4

59605

1386

755-8 755-8

K = Cold-rolled â&#x20AC;˘ V = Hot-rolled

Temper Description Comparison DIN-standard - EN-standard DIN-standard material no. x.xxxx.07 .08 .10 .10 .10 .24 .26

EN-Standard 1994 xxxx-H112 -F -0 -H111 -0 -H12 -H14

.30 .25 .27

-H22/H32 -H24/H34

Temper Hot-rolled with prescribed strength value Hot-rolled without prescribed strength value Soft non-hardable alloys Soft, stretch-straightened non-hardable alloys Soft hardable alloys Cold-rolled to 1/4 hard Cold-rolled to 1/2 hard Cold-rolled to 1/1 hard Cold-rolled, annealed to 1/4 hard Cold-rolled, annealed to 1/2 hard Cold-rolled, annealed to 3/4 hard Cold-rolled, annealed to 1/1 hard

.29

-H26/H36

.31

-H28/H38

.51

-T4/T451

Cold-hardened

.53

-T3/T351

.71 .72

-T6/T651 -T6/T651

Cold-hardened with fiber structure Temper-hardened Temper-hardened

Temper Description Comparison DIN-standard - EN-standard Al99.5-1050A

AlMg1-5005A

AlMg3-5754

AlMg4.5Mn-5083

W7 - 0

W11 - 0

W19 - 0

W28-0

W19 - H111

AlMgSi1-6082

W28 - H111 W-0

F9 - H12

F13 - H12

F22 - H12

F11 - H14

F15 - H14

F24 - H14

F15 - H18

F19 - H18

F29 - H18

G9 - H22/H32

G13 - H22/H32

G22 - H22/H32

G31 - H22/H32

G11 - H24/H34

G15 - H24/H34

G24 - H24/H34

G35 - H24/H34

G17 - H26/H36

G27 - H26/H36 F21 - T4/T451

F28 - T6/T651 F32 - T6/T651

67


Technical Information

EN 515: 2000 Temper

Definition

F

As fabricated (no mechanical property limits specified).

O2)

Annealed - products achieving the required annealed properties after hot forming processes may be designated as O temper. Thermally treated at approximately the same time and temperature required for solution treatment and slow cooled to room temperature (formerly designated as T41).

1)

O1 O2

Thermomechanically processed to enhance formability, such as required for super-plastic forming (SPF).

O3

Homogenized.

H12

Strain-hardened - 1/4 hard.

H14

Strain-hardened - 1/2 hard.

H16

Strain-hardened - 3/4 hard.

H18

Strain-hardened - 4/4 hard (fully hardened).

H19

Strain-hardened - extra hard.

Hxx4

Applies to embossed or patterned sheet or strip, fabricated from the corresponding Hxx temper.

Hxx5

Strain-hardened - applies to welded tubes.

H111

Annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling.

H112

Slightly strain-hardened from working at an elevated temperature from a limited amount of cold work (mechanical property limits specified). Applies to aluminium-magnesium alloys with a magnesium content of 4% or more and for which mechanical property limits and exfoliation corrosion resistance are specified.

H116 H22

Strain-hardened and partially annealed - 1/4 hard.

H24

Strain-hardened and partially annealed - 1/2 hard.

H26

Strain-hardened and partially annealed - 3/4 hard.

H28

Strain-hardened and partially annealed - 4/4 hard (fully hardened).

H32

Strain-hardened and stabilized - 1/4 hard.

H34

Strain-hardened and stabilized - 1/2 hard.

H36

Strain-hardened and stabilized - 3/4 hard.

H38

Strain-hardened and stabilized - 4/4 hard (fully hardened).

H42

Strain-hardened and painted or lacquered - 1/4 hard.

H44

Strain-hardened and painted or lacquered - 1/2 hard.

H46

Strain-hardened and painted or lacquered - 3/4 hard.

H48

Strain-hardened and painted or lacquered - 4/4 hard (fully hardened).

W

Solution heat-treated (unstable temper). The period of natural ageing (W2h..) may also be specified.

W51

Solution heat-treated (unstable temper) and stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for hand or ring forging and rolled ring). The products receive no further straightening after stretching. Solution heat-treated (unstable temper) and stress-relieved by controlled stretching (permanent set 1% to 3% for extruted rod, bar, shapes and tube, 0.5% to 3% for drawn tube). The products receive no further straightening after stretching.

W510

W511

Same as W510 except minor straightening is allowed after stretching to comply with standard tolerances.

W52

Solution heat-treated (unstable temper) and stress-relieved by compressing to produce a permanent set of 1- 5%.

W54

Solution heat-treated (unstable temper) and stress-relieved by restriking cold in the finish die (die forging).

T1

Cooled from an elevated temperature shaping process and naturally aged.

T2

Cooled from an elevated temperature shaping process, cold worked and naturally aged.

T33)

Solution heat-treated, cold worked and naturally aged.

T31

Solution heat-treated, cold worked approximately 1% and naturally aged.

T351

S olution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and naturally aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and naturally aged. The products receive no further straightening after stretching.

T3510

T3511

Same as T3510 except that minor straightening is allowed after stretching to comply with standard tolerances.

T352

Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and naturally aged.

68


EN 515: 2000 Temper

Definition

T354

Solution heat-treated stress-relieved by restriking cold in the finish die and naturally aged.

T36

Solution heat-treated, cold worked approximately 6% and naturally aged.

T37

Solution heat-treated, cold worked approximately 7% and naturally aged.

T39

Solution heat-treated and cold worked to an appropriate degree to achieve the specified mechanical properties. Cold work may be carried out before or after natural ageing.

T44)

Solution heat-treated and naturally aged.

T42

Solution heat-treated and naturally aged. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and naturally aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar shapes and tube, 0.5% to 3% for drawn tube) and naturally aged. The products receive no further straightening after stretching.

T451

T4510

T4511

Same as T4510 except that minor straightening is allowed after stretching to comply with standard tolerances.

T452

Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and naturally aged.

T454

Solution heat-treated, stress-relieved by restriking cold in the finish die and naturally aged.

T5

Cooled from an elavated temperature shaping process and then artificially aged.

T51

Cooled from an elavated temperature shaping process and then artificially aged in underageing conditions to improve formability. Cooled from an elevated temperature shaping process and then artificially aged - mechanical property level higher than T5 achieved through special control of the process (6000 series alloys).

T56 T65)

Solution heat-treated and then artificially aged.

T61

Solution heat-treated and then artificially aged in underageing conditions to improve formability.

T6151

Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate and then artificially aged in underageing conditions to improve formability. The products receive no further straightening after stretching. Solution heat-treated and then artificially aged. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated and then artificially aged in underageing conditions (between T6 and T61) to improve formability. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially aged. The products receive no further straightening after stretching.

T62 T64 T651

T6510

T6511

Same as T6510 except that minor straightening is allowed after stretching to comply with standard tolerances.

T652

S olution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially aged.

T654

Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially aged.

T66

Solution heat-treated and then artificially aged - mechanical property level higher than T6 achieved through spe足 cial control of the process (6000 series alloys).

T7

Solution heat-treated and then artificially overaged.

T73

Solution heat-treated and then artificially overaged in order to achieve the best stress corrosion resistance.

T732

Solution heat-treated and then artificially overaged in order to achieve the best stress corrosion resistance. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ringand then artificially overaged in order to achieve the best stress corrosion resistance. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged in order to achieve the best stress corrosion resistance. The products receive no further straightening after stretching.

T7351

T73510

T73511

Same as T73510 except that minor straightening is allowed after stretching to comply with standard tolerances.

T7352

Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially overaged in order to achieve the best stress corrosion resistance. Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially overaged in order to achieve the best stress corrosion resistance.

T7354

69


Technical Information

EN 515: 2000 Temper

Definition

T74

Solution heat-treated and then artificially overaged (between T73 and T76).

T7451

Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially overaged (between T73 and T76). The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar shapes and tube 0.5% to 3% for drawn tube) and then artificially overaged (between T73 and T76). The products receive no further straightening after stretching.

T74510

T74511

Same as T74510 except that minor straightening is allowed after stretching to comply with standard tolerances.

T7452

Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artifi足 cially overaged (between T73 and T76). Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially overaged (between T73 and T76)

T7454 T76

Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance.

T761

S olution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance. (applies to 7475 sheet and strip). Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products receive no further straightening after stretching.

T762

T7651

T76510

T76511

Same as T76510 except that minor straightening is allowed after stretching to comply with standard tolerances.

T7652

S olution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artifi足 cially overaged in order to achieve a good exfoliation corrosion resistance. Solution heat-treated, stress-relieved by restriking in the finish die and then artificially overaged in order to achieve a good exfoliation corrosion resistance.

T7654 T79

Solution heat-treated and then artificially overaged (very limited overageing).

T79510

S olution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged (very limited overageing). The products receive no further straightening after stretching.

T79511

Same as T79510 except for minor straightening is allowed after stretching to comply with standard tolerances.

T86)

Solution heat-treated, cold worked and then artificially aged.

T81

Solution heat-treated, cold worked and then approximately 1% and then artificially aged.

T82

Solution heat-treated by the user, controlled stretched with a minimum permanent set of 2% and then artifi足cially aged (alloy 8090). Solution heat-treated, cold worked a controlled specific amount and then artificially aged (applies to 6063 drawn tube).

T832 T841

Solution heat-treated, cold worked and then artificially underaged (sheet and strip in alloys 2091 and 8090).

T84151

Solution heat-treated, stress-relieved by stretching with a permanent set of 1.5% to 3% and then artificially underaged (plate in alloys 2091 and 8090). Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and then artificially aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, profiles and tube, 0.5% to 3% for drawn tube) and then artificially aged. The products receive no further straightening after stretching.

T851

T8510

T8511

Same as T8510 except for minor straightening is allowed after stretching to comply with standard tolerances.

T852

S olution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artifi足 cially aged.

T854

Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially aged.

T86

Solution heat-treated, cold worked approximately 6% and then artificially aged.

T87

Solution heat-treated, cold worked approximately 7% and then artificially aged.

T89

S olution heat-treated, cold worked to an appropriate degree to achieve the specified mechanical properties and then artificially aged.

T9

Solution heat-treated, artificially aged and then cold worked.

70


Terms of Sale and Delivery

1. Validity The present Terms of Sale and Delivery shall apply to all quotations, sales and deliveries unless other­ wise agreed in writing. Any terms of sale and delivery which may be printed on the order confirmation or to which the customer otherwise refers shall only be valid if this is expressly stated in our order confirmation. 2. Product Information All information about weight, dimensions and quality as well as technical data and other data stated in catalogues, prospectuses and any other advertising material shall be directional and shall only be binding to the extent they form an express part of the agreement between the parties. 3. Quotations All prices shall be subject to changes in raw material and exchange rates, delivery time subject to the goods being unsold and change of delivery time from works. If all Seller gives a written quo­tation which does not state a specific time stipulated for acceptance, the quotation shall lapse if acceptance has not been received by the Seller within 2 weeks from the date of quotation. 4. Quality Buyer shall be responsible for ensuring that the technical data and the material in its entirety are suitable for his requirements. A certificate will as agreed be enclosed in accor­ dance with agreement. Seller will check that the certificate meets the demands for the delivery but will not check the information provided in the cer­ tificate. 5. Quantity The total quantity delivered shall be subject to a margin of plus/minus 10% of the quantity specified. Calculation by weight, unit or length shall be in accordance with generally accepted practice. 6. Orders and agreement In order to be binding on Seller, an order shall be confirmed in writing by Seller, and only Seller´s Terms of Sale and Delivery shall apply to the exe­cution of the order. If Buyer has any objections to the contents of the order confirmation these shall be made in writing and shall be received by Seller not later than one week after the date of the order confirmation. 7. Prices and Delivery In connection with sales from stock, the prices excl. VAT and terms of payment are stated in Seller´s cur­ rent price list in force at the time in question shall apply. Delivery shall be ex Seller´s address. Freigt payable by Buyer shall always be invoiced Buyer and shall not be paid in cash on receipt. 8. Payment Seller shall receive payment on the date specified in the invoice as the final due date for payment. If such a date has not been specified payment shall be made in cash on delivery. However, Seller reser­ves the right to change the terms of payment if Seller receives information that Buyer´s ability to pay has deteriorated. If the delivery is postponed because of Buyer´s situation (claimant´s default), Buyer shall nevertheless, unless otherwise notified by Seller, be under an obligation to make any payment to Seller as if delivery had been made at the agreed time. If payment is made after the due date, Seller shall be entitled to charge interest on the outstanding amount from time to time from the due date at the rate of interest stated on the invoice at any given time. Buyer shall not be entitled to offset any coun­ terclaims against Seller which have not been recog­ nized in writing by Seller and shall not be entitled to withhold any part of the purchase price because of countercla­ims of any kind whatsoever.

9. Retention of Title Seller shall retain title to the goods sold with the restrictions that follow from mandatory rules of law until the full purchase price plus any costs accrued have been paid to Seller or to the party to whom Seller has assigned his right. 10. Delivery Delivery shall be made from Seller´s address whether or not Seller delivers the goods sold to Buyer using his own employees or third party in accordance with a separate agreement. The time of de­livery has been fixed by Seller at Seller´s best esti­ mate with the reservations made when the quota­ tion was given/the agreement was entered into. In connection with sale of goods from stock and standard goods, a postponement of the time of delivery by 30 days due to Seller´s situation shall be regarded as delivery in due time and shall be respected to the effect that Buyer cannot exercise any remedies against Seller for this reason unless otherwise agreed. In connection with sale of individually manufac­ tured goods, Seller shall not be liable for any form of delay irrespective of the duration hereof to the effect that Buyer cannot exercise any remedies against Seller for this reason. Each of the parties shall, however, be entitled, without any liability, to cancel the agreement if the delay exceeds three months. If a delay in delivery is due to Seller being in a situ­ ation as stated in Clause 15 (exemption from liabil­ ity), the time of delivery shall be postponed by the time of duration of the obstacle. However, both parties shall, without any liability, be entitled to cancel the agreement if the obstacle has lasted for more than 3 months. The present provision shall apply whether or not the cause of delay occurs before or after the expiry of the agreed delivery time. In the above case, Seller shall notify Buyer of the change in delivery time without undue delay. 11. Packaging Packaging shall be on Buyer´s account unless it is expressly stated that this has been included in the price. Packaging may only be returned in accordance with a separate agreement. 12. Cancellation In connection with cancellation of deliveries, Buyer shall be under an obligation to pay full compensa­ tion, including for loss of profit, and gene­rally to indemnify Seller for all costs incurred in connection with the cancellation. 13. Product changes Seller reserves the right to make changes to agreed specifications without notice if this can be done witout any inconvenience to the Buyer. 14. Defects and Complaints Upon delivery, Buyer shall immediately perform such inspection of the goods sold as generally accepted business practice requires. Any defects in the goods sold will, within a reasonable period of time, be remedied or a replacement delivery will be made at Seller´s discretion. If such remedial action is not taken or a replace­ ment delivery is not made within a reasonable period of time, Buyer shall be entitled to termina­te the agreement, require a reduction in the pur­ chase price or claim damages pursuant to with the general rules of Danish law and the present Terms of Sale and Delivery. If Buyer wants to claim a defect, Buyer shall notify Seller hereof in writing immediately after the defect has been or should have been discovered and specify the nature of the defect in the written notification. Samples of a sufficient quantity for a certain assessment of the justification of the com­ plaints must be enclosed with complaints about the

quality of the goods. If Buyer has discovered or should have discovered the defect, and he does not submit a complaint in accordance with the above, he cannot subsequently make a claim about the defect. If Buyer has not made a claim about the defect to Seller within 6 months from the date of delivery, he cannot subsequently claim any such defect. If remedial action has been taken or a replacement delivery has been made, Seller´s liability for defects cannot be extended to more than 1 year from the original date of delivery. 15. Limitation of Liability A claim for damages against Seller cannot exceed the invoice amount for the product sold. Seller shall not be liable for any consequential loss, loss of profit or any other indirect loss which follows from the agreement, including any indirect loss which has incurred as a result of delay or defe­cts in the goods sold. The following circumstances shall result in exemption of liability for Seller if they pre­ vent performance of the agreement or make the performance of the agreement unnecessarily oner­ ous. Industrial disputes and any other circumstances beyond the control of the parties such as fire, war, mobilisation or unforeseen military call-ups of an equivalent extent, requisitioning, sequestration, exchange controls, riots and civil unrest, shortage of transport possibilities, general scarcity of goods, fuel restrictions and defects in or delays in deliver­ ies from sub-suppliers which are due to any of the circumstances set out in the present Clause. Circumstances like those set out above which occured before the quotation was given/the agreement was entered into shall only entail exemption of liability if their effect on the perfor­ mance of the agreement could not have beeen foreseen at the time in question. Seller shall be under an obligation to notify Buyer in writing without undue delay should any such circumstances occur. 16. Product Liability Seller shall only be liable for personal injury if it is proved that the injury was suffered as a result of errors or omissions on the part of Seller or other parties for whom, Seller is responsible. Seller shall not be liable for any damage to real property or movable property. Seller shall not be liable for any consequential loss, loss of earnings or any other indirect loss. To the extent to which Seller may incur product liability vis-à-vis a third party, Buyer shall be under an obligation to indemnify Seller to the same extent as Seller´s liability is limited in accordance with the above three sentences. If a third party makes a claim against one of the parties for liability for damages in accordance with the present Clause the party in question shall immedi­ ately notify the other party. Seller and Buyer shall be under a mutual obligation to accept that legal proceedings are instituted against them at the court which hears claims for damages brought against one of them on the basis of damage or injury allegedly caused by the deliv­ ery. These limitations to Seller´s liability shall not apply if he has shown gross negligence. 17. Returns Returns will only be accepted in accordance with a special agreement on this with Seller. Unless otherwise agreed, crediting of returns shall be subject to the returns being undamaged and as for works/factory-packaged materials that they are in original, unbroken packaging. 18. Disputes Any disputes arising between the parties shall be settled by the courts in Denmark pursuant to Danish law.

71


Reservations are taken for printing errors. Photos Š: Alumeco A/S

Alumeco A/S

Naesbyvej 26

DK-5000 Odense C

Tlf. +45 66 17 81 17

Fax +45 66 14 58 71

e-mail@alumeco.dk

www.alumeco.com


Aluminium Product Range