Page 1

Marine Parts Specialist

www.mermaidmarine.com

SpÊcialiste en pièces nautiques

1973-2018 th

45 Anniversary


SEAFLO SHOWER SUMP PUMP SYSTEM 750 GPH This all-in-one SEAFLO Shower Sump Pump System has a built in float switch that turns the system on when the water level rises and shuts off when water is removed. A clear screw down cover and removable mesh filter provides easy cleaning if system becomes clogged with debris. 12vdc 750 GPH pump, Max draw 3.0 amps, the unit has a 3/4" outlet diameter. Standard pump configuration. 9ft head, 3ft lead.

Dimensions: 13.15”L x 8.50”W x 4.4”H PART NO.

5412510 5413475

MFG#

DESCRIPTION

SFBP1-G750-07 SFB1-G750-06

Shower Sump Replacement Pump

PRICE

EXTERIOR SHOWER UNIT

PART NO.

7200831

DESCRIPTION

Brushed Nickle Finish accents this single lever shower control valve. The valve has a replaceable cartridge for easy one piece repair. PART NO.

DESCRIPTION

7200823

This ergonomic shaped hand piece with shower controls, adjustable bar, and integral soap dish provide a finished appearance to any shower assembly. Each shower system requires an elbow and a threaded nipple.

Lg. Dimensions: 13"L x 7-23/64"W x 4-7/16"H MFG#

DESCRIPTION

4142-1 4144-1

12V 5A Std. Shower Sump 24V 2A Lg. Shower Sump

PRICE

$185.29 $213.60

SHOWER DRAIN KITS 800GPH

7200825

A full capacity shower drain system that automatically turns on after the water starts, and shuts off when the water is removed. Activated by a Rule-A-Matic float switch. Available in single inlet and three inlet ports which offer varying combinations of inlet hose. Clear screw down cover, removable strainer for easy cleaning, and an internal check valve to prevent back flow. 800gph multi-port inlet pump Outlet port: 3/4" (19mm) Size: Inlet port: 3/4", 1", 1-1/8" & 1-1/2" 8-1/4"L x 11-1/4"W x 5-1/2"H (19, 19, 25.4, 28.6 & 38mm) (209.5mm x 286mm x 140mm) PART NO.

MFG#

DESCRIPTION

PART NO.

DESCRIPTION

Cockpit/Shower Drain

PRICE

$24.51

294 FRESH WATER MANAGEMENT

7200824

7200822 PART NO.

DESCRIPTION

7200822 7200824 7200825

Shower Head Elbow Nipple

PRICE

$120.53 $56.59 $22.28

MARINE SHOWERHEAD AND KIT Convenient on/off switch allows you to pause the flow of water while shampooing, greatly reducing the amount of water used. No more rushing through your shower to conserve water. Multi-featured showerhead allows you a choice of four spray patterns. From a drenching rain to a gentle massage, you can personalize your shower with your favourite comfort settings. Heavy-duty construction for years of use. Kit includes: Showerhead, Flex Hose, Washers, Wall Mount and Hardware.

PRICE

5412503 98A 12V, 4A, Shower Pump $195.13 5412502 98A-24 24V, 2A, Shower Pump $206.03 COCKPIT/SHOWER DRAIN This 90° Nylon thru-deck connector is excellent for draining water from the cockpit or shower areas of your boat. The grill prevents the objects from going thru the drain. Requires 1-1/2" hose. 7526250

$175.88

INTERIOR SHOWER HEAD

Discharge 3/4".

PART NO.

PRICE

Interior Shower Control Valve

Meets or exceeds all applicable regulations of the ABYC and USCG.

5412505 5412506

$107.92

INTERIOR SHOWER CONTROL VALVE

SHOWER SUMP 750 GPH

Std. Dimensions: 10-1/2"L x 8-1/8"W x 4-1/2"H

PRICE

Exterior Shower, Latching Shower

$95.97 $51.89

These shower sump systems deliver the performance you've been asking for. The lid snaps in to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent air locks.

Compact unit • Clean, white components • Latching door, Impact & temperature resistant • Paintable & UV stable housing • 5' CSA approved hose • Stainless steel hinge pin • Anti-siphon vacuum breaker Size: 10.375"Wx5.875"Hx3.25"D

PART NO.

MFG#

DESCRIPTION

7200840 7200841 7200844 7200845

43710 43711 43713 43714

Chrome Showerhead, Only White Showerhead, Only Chrome Showerhead, Kit White Showerhead, Kit

PRICE

$24.72 $21.49 $41.87 $35.28


STAINLESS STEEL DEEP ROUND SINK

GALLEY PUMP

Made of 304 Stainless Steel. Hand operation pump with built-in check valve. Chrome-plated die cast top with white plastic body. Overall height 10". Requires 1-7/8" cutout. Uses 3/8" ID hose, 1 GPM Capacity.

2-7/16" Drain is offset.

Overall Dimensions: 10-1/4" ID x 11-1/2" OD x 7-1/8"D PART NO.

DESCRIPTION

7200798

PRICE

$106.07

Round Sink

PART NO.

DESCRIPTION

7200894

STAINLESS STEEL ROUND SINK

PRICE

$68.24

Galley Pump

ELECTRIC GALLEY PUMP AND FAUCET

Cutout size: 10-7/8"

PART NO.

DESCRIPTION

7200801

11-1/2" x 5"D

This 1 GPM max single outlet water system is designed for use in boats, campers and van conversions. This is a centrifugal pump and must be mounted below the water level of the tank. Stainless steel spout swings out of the way, and push button operation. ABS plastic base.

PRICE

$73.11

WHITE PLASTIC SINKS PART NO.

7200726 7200727 7200728 7200729

MFG#

DESCRIPTION

42630-2992-P 42630-2994-P 42630-3992-P 42630-3994-P

12V Pump Only 24v Pump Only 12V Combo 24V Combo

PRICE

$117.68 $124.93 $135.95 $144.96

FAUCET FOR PRESSURE WATER SYSTEMS

Hot and cold faucet, single hole application. Heavy duty chrome plated brass with swivel spout.

Moulded from white, glossy, weatherable ABS plastic. These stylish sinks are used inside and out. You no longer need to worry about tarnish or rust. Drain not included. Rectangle: 17”L x 13”W x 9-1/2”D, Cut out 14”L x 10W”; Drain Diameter 2". Use with 7200804. Oval: 13”L x 10”W x 5”D; Drain Diameter 1-1/4". Use with 7200805. PART NO.

MFG#

DESCRIPTION

7200796 7200797

32900800 32100000

Rectangle Sink Oval Sink

PRICE

$253.64 $75.80

PART NO.

7200812

DESCRIPTION

Faucet for Pressure Water Systems

PRICE

$115.75

SINK DRAINS 2" Strainer with a 5/8" hose barb. For use with 7200796, 7200798 and 7200801 only. 7200804

1-1/4" drain tube. For use with 7200797 & 7200810 7200805 PART NO.

7200804 7200805

DESCRIPTION

2" Sink Drain 1-1/4" Sink Drain Tube w/ Stopper

PRICE

$19.97 $58.12

FRESH WATER MANAGEMENT 295


PAR-MAX AUTOMATIC PRESSURE CONTROLLED PUMPS The pumps are controlled by a switch which senses the pressure drop when a faucet is opened and activates the pump; it turns off when the system pressure builds to a pre-set limit as the faucet is closed. They are self-priming, quiet in operation and can run dry for extended periods. Pressure controlled diaphragm pumps provide boat owners with a fresh water system with the versatility to offer full flow or a trickle. PART NO.

MFG#

DESCRIPTION

VOLT

7200720 7200771 7200772 7200775 7200776 7200778 7200784 7200785 7200786

42630-2900 31295-0092 31295-0094 31395-0092 31395-0094 32600-0092 32600-0094 31620-0092 31620-0094

PAR-MAX 1 PAR-MAX 1.9 PAR-MAX 1.9 PAR-MAX 2.9 PAR-MAX 2.9 PAR-MAX 3.5 PAR-MAX 3.5 PAR-MAX 4 PAR-MAX 4

12 12 24 12 24 12 24 12 24

PRICE

$124.74 $156.71 $163.82 $159.53 $167.20 $217.52 $222.21 $290.14 $360.59

PAR-MAX PLUS AUTOMATIC WATER PRESSURE PUMPS The high pressure capability of ParMax Plus automatic water pressure pumps provides exceptional flow and consistent water pressure to handle the demand of multiple outlets. All models include soft rubber mounts and quick connect fittings for ease of installation. The patented Par-Max Plus co-injected molded diaphragm and larger heavier duty motor brushes significantly extend the pump life up to 50% longer than existing Jabsco Par-Max Series diaphragm pumps. These pumps are self priming up to 10’ (3m) and they can run dry without damage. They are made from corrosion resistant materials, capable of handling the harshest marine environments. The Par-Max Plus series water pressure pumps are certified to EN ISO 8846 Marine (Ignition Protection). IPX6 rated. Includes: 2 x 1/2" Male Thread Quick Connect Fittings and 2 x 1/2" Male Thread Elbow Quick Connect Fittings. PART NO.

MFG#

DESCRIPTION

VOLT

2712010 2712011 2712012

82400-0092 82400-0094 82600-0092

4 GPM 4 GPM 6 GPM

12V 24V 12V

PRICE

AQUA JET WATER PRESSURE PUMP

These Quiet Self Priming Aqua Jet five chamber diaphragm pumps provide the perfect pulsation free water pressure for small and medium leisure and commercial boats.

They are efficient and compact and particularly suitable where low sound levels and continuous even pressure in relation to water flow are placed at a premium - such as in shower and galley applications. Operates in fresh or sea water. Always use a PUMProtector Inlet Strainer before the pump intake. When a pipe thread connection is required, simply cut off the barb portion of the adapter. Integrated pressure switch turns pump on / off automatically when tap is opened or closed. Ports: • Connection for 2.9 GPM: 1/2" hose / 3/8" NPT & 3/4" hose / 1/2" NPT • Connection for 4.0 GPM: 1/2" hose / 3/8" NPT & 3/4" hose / 1/2" NPT PART NO.

DESCRIPTION

2711000 2711001 2711005 2711006

12VDC, 10A, 2.9 GPM – 11L/min 24VDC, 5A, 2.9 GPM – 11L/min 12VDC, 10A, 4.0 GPM – 15L/min 24VDC, 5A, 4.0 GPM – 15L/min

PLUG IN PORTS 2 Ports per kit, will fit all Flojet and Jabsco Pumps PART NO.

DESCRIPTION

7200706 7200707 7200708 7200709 7200710

3/4" Garden Hose 3/4" Hose 1/2" Hose 90° for 1/2" Hose 1/2" Male NPT

VFLO CONSTANT WATER PRESSURE PUMP

The variable speed pump draws less power on average and runs smoother and quieter without water hammer. It is self priming, 10' (3m) max. suction vertical lift. Can run dry without damage. No accumulator tank required. Includes: Pumpgard Inline Strainer, Quad Port Snap-Fit Fittings (2 x 1/2" Straight Male NPT, 1 x 1/2" 90˚ Male NPT, 1 x 1/2" 90˚ Hose Barb, 1 x 3/4" 90˚ Hose Barb). Threaded fittings are QEST (compression type). Flow Rate: 5 GPM (19 lpm) Operating Pressure: 40 PSI (2.75 bar) Cutout Pressure: 60 PSI (4.1 bar) PART NO.

MFG#

DESCRIPTION

7200765 7200766

42755-0092 42755-0094

12VDC, 15A Pump 24VDC, 10A Pump

PRICE

$467.56 $520.94

296 FRESH WATER MANAGEMENT

PRICE

$6.59 $6.59 $6.59 $6.59 $6.59

PUMPROTECTOR STRAINER

$223.19 $228.01 $301.57

This Constant Flow Water Pressure Pump has an electronic control system that operates a variable speed drive. This enables the motor to speed up or slow down and match the water demand in real time providing consistent high pressure for up to 4 faucet/shower combinations simultaneously.

PRICE

$149.49 $158.82 $228.58 $244.16

UNIVERSAL

INLET

The PUMProtector inlet and universal strainers feature transparent covers for simple inspection, a wide variety of KlickTite port connectors for simple installation a n d re m o va l , a n d h i g h quality materials for simple maintenance.

Diameter: 3.15" (80mm) Height: 2.35" (60mm) Weight: 0.33 lbs (0.15 kg) Mesh size: 40 Max Liquid Temp. ±120°F (±50°C) Max Temp. for Drinking Water ±85°F (±30°C) When a pipe thread connection is required, simply cut off the barb portion of the adapter. The connectors make it possible to remove the entire unit for thorough cleaning wherever it's most convenient. Ports: • Universal Strainer: 2 x (1/2" hose / 3/8" NPT) 2 x (3/4" hose / 1/2" NPT) • Inlet Strainer: 1 x (1/2" hose / 3/8" NPT) 1 x (3/4" hose / 1/2" NPT) Built-in KlickTite PART NO.

MFG#

DESCRIPTION

PRICE

7503000 7503002

09-24652-02-CN 09-24653-02-CN

Universal Strainer Inlet Strainer

$20.12 $20.12


STACKED WATER SYSTEMS

These Xylem Stacked Water Systems are fully assembled water pressure sets which makes installation of water pressure systems simple. Thermal protected pumps are assembled onto a pre-pressurized accumulator tank providing a smooth flow. They are self-priming up to 10' (3m), they have run-dry ability. Complies with ISO 8846 Marine (Ignition Protection) Specifications: Single Pump Assembly • Flow: 4.8 GPM (18LPM) • Voltage: 1 model 12VDC • Shut-Off Pressure: 40 PSI (2.8bar) • Fitting: Connections for 3/4" (19mm) hose tail • Size: 12.2" Long x 9.4" Wide x 9.8" High (31cm x 24cm x 25cm) • Will serve up to 4 outlets • Weight: 12 lbs (5.4 kg)

Single Stack 7200767

Double Stack 7200768 / 7200769

Specifications: Double Pump Assembly • Flow: 9 GPM (34 LPM) • Voltage: 2 models 12VDC and 24VDC • Shut-Off Pressure: 40 PSI (2.8 bar) • Fitting: Connections for 3/4" (19mm) hose tail • Size: 13.6" Long x 12.2" Wide x 13.6" High (34.5cm x 31cm x 34.5cm) • Will serve up to 7 outlets • Weight: 21 lbs (9.58 kg) PART NO.

MFG#

DESCRIPTION

PRICE

7200767 7200768 7200769

52520-1000 52530-1000 52530-1100

4.3 GPM, 12VDC 9.0 GPM, 12VDC 9.0 GPM, 24VDC

$812.13 $1,339.48 $1,368.72

ACCUMULATOR TANK Intended for installation in any pumped water pressure system found in boats, RV's, motor caravans, coaches that are controlled by a pressure switch. Softens the water flow by using an internal bladder to absorb the variations in pressure between the pump and the outlets in the system. This, in turn, reduces noise from the pump motor, shock pressures (pipe hammer) as well as reducing battery drain and promoting longer pump life. Also provides better control over hot water temperature especially noticeable with instantaneous gas water heaters and with showers. Tank: Pressure Resistant Plastic Construction Capacity: 1 liter (33 fl oz) Max. Operating Pressure: Up to 125 PSI (8.6 bar) Pre-Charge Pressure: 10 PSI (0.7 bar) Air Valve: Standard Tire Valve Weight: 1.6 lbs (0.7 kg) Dimensions: 13-1/4" (337mm) x 4-3/4" (119mm) PART NO.

7200731

MFG#

DESCRIPTION

30573-0000

Tank w/Bladder

PRICE

$128.89

Multi-Outlet Water Pressure Systems Features smooth flow, hot and cold mix at showers and minimum cycling at high or low demand.

FRESH WATER MANAGEMENT 297


WINTERSAFE -50F DUAL PURPOSE BOAT/RV ANTIFREEZE

KUUMA PREMIUM MARINE WATER HEATERS

Safe for all engines, Non-toxic propylene glycol formula. Provides protection down to -50°F (-46°C). Contains corrosion inhibitors that protect all engine components and seals. Most effective way to protect all marine engines & water systems from freeze-up during winter storage.

Enjoy hot water heated dockside with 120V AC power or with engine heat when underway. These Kuuma hot water heaters feature a marine-grade aluminum case and a clad aluminum tank with a 1500W heating element and a large diameter, dual-loop heat exchanger. The circuitry is ignition protected, and each heater includes a high-temperature limiter with automatic reset. Specifications: Power: 120VAC, 1500W, 12.5A Heater Ports: 1/2" NPT Heat Exchanger Ports: 5/8" Hose Barb

All plumbing and electrical connections are “front” located. Not for use with raw water. Use with engine coolant only.

CAPACITY

6 GAL

6 GAL

11 GAL

11 GAL

MOUNT

SIDE

FRONT/REAR

SIDE

FRONT/REAR

WIDTH

16.625”

13.75”

18.875”

16.25”

HEIGHT

13.625”

13.625”

16.25”

16.25”

DEPTH

19.375”

19.75”

21.625”

23.25”

PART NO.

7014050 7014051 7014055 7014056 7014048 7014049

MFG#

DESCRIPTION

Not made with recycled materials. • Safe for all engines and water systems. • Non-toxic product. • Safe for Copper, Brass and plastic, rubber and solder • Ethanol-Free • Corrosion inhibitors to protect engine components & seals. PART NO.

DESCRIPTION

5222000 5222055

1 Gallon 55 Gallon Drum

WinterSafe The Ultimate in extreme cold weather and corrosion protection for all engines and drinking water systems. Premium additive prevents corrosion of aluminum, copper, brass or solder and will not harm rubber, plastic, seals or hose materials. The 3X-died blue-green colour provides excellent blow-through visibility. Non-toxic USP-grade ingredients containing no alcohols. Ready-to-use or may be diluted – please follow label directions for dilution ratios. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to -52°C). Used in boats, RVs, vacation homes, pools.

$500.58 $500.58 $633.09 $633.09 $47.14 $49.50

WATER HEATERS

$8.06 $392.39

ANTIFREEZE -100 NON-TOXIC

PRICE

11810 Side Mount, 6 Gl. 11811 Back Mount, 6 Gl. 11840 Side Mount, 11 Gl. 11841 Back Mount, 11 Gl. 11930 Thermostat, All Models, 120 / 240 VAC 11920 High Temp Limiter, All Models, 120 VAC

PRICE

PART NO.

MFG#

DESCRIPTION

5222001 5222056

31500 315G55

1 Gallon 55 Gallon Drum

PRICE

$16.33 $890.19

QUICK-TURN PERMANENT BY-PASS KIT Save on antifreeze when you winterize with this easily installed water heater by-pass kit. Sturdy, brass backflow resister and 100% shut-off valve lets you bypass the water heater with a single turn. Water heaters feature aluminium tanks and hold down brackets, dual wall heat exchangers, and ignition protection with your choice of marine galvanized or stainless steel exteriors. All Seaward Water Heaters come with rear heat exchangers except 7014018 which comes with front heat exchanger. Available capacities are 6, 11, or 20 gallon models. Rated for 120V. UL/CE approved. Can also be hooked up on the engine. 120V/15A PART NO.

7014005 7014006 7014010 7014011 7014018 7014000

DESCRIPTION

SIZE

6 Gal. Galv. 13"W x 19"D x 13"H 6 Gal. S/S 13"W x 19"D x 13"H 11 Gal. Galv. 16"W x 22"D x 16"H 11 Gal. S/S 16"W x 22"D x 16"H 20 Gal. S/S 20-1/4"W x 20-1/4"D x 27"H Repl. Element for 6, 11 & 20 Gal. Models

PRICE

$569.13 $672.86 $631.89 $753.54 $1,301.13 $36.73

298 FRESH WATER MANAGEMENT

PART NO.

MFG#

DESCRIPTION

PRICE

7013999 35983 Quick Turn Bypass Kit $35.90 SEASONAL BY-PASS KIT This temporary water heater by-pass kit allows you to hook up for winterizing and remove in the spring for reconnecting the system.

PART NO.

7013998

MFG#

DESCRIPTION

35713

Seasonal Bypass Kit

BLOW-OUT PLUG

PART NO.

7013995

PRICE

$9.69

Completely clear your water lines with blow-out plugs. Screw the plug into the city water inlet, open all drains and faucets, attach and activate air pump until all lines are clear.

MFG#

DESCRIPTION

36153

Brass Blow-out Plug

PRICE

$7.21


DRINKING WATER HOSE

food

ADJUSTABLE WATER NOZZLE Super heavy duty hoses are reinforced for maximum kink resistance. Especially useful when hooked with a Y-valve to your main faucet. Made of FDA approved materials; drinking water safe.

GRADE

PART NO.

MFG#

DESCRIPTION

3957430 3957431

22783 22793

25' x 5/8" Drinking Water Hose 50' x 5/8" Drinking Water Hose

PRICE

$20.88 $36.79

WASH DOWN HOSE STATION Contains 25ft white 1/2" coiled poly hose and non-corrosive hose fittings and nozzles. Station includes hose base mount. UV and chemical resistant. PART NO.

MFG#

DESCRIPTION

3957435 WDHH-25W-C-DP Wash Station SEA-TECH COILED WATER HOSE

DESCRIPTION

PART NO.

MFG#

DESCRIPTION

GHN-BN

5-1/2” Water Nozzle

PART NO.

MFG#

DESCRIPTION

6914163

GHN

5-1/2", Nozzle

$0.55/ft $0.83/ft $1.07/ft $1.40/ft $1.74/ft $2.50/ft

PART NO.

MFG#

DESCRIPTION

6914167

GHTN-RG

6", Adjustable Nozzle

PRICE

3906050 1/2" Clear Hose FLEX HOSE PROTECTOR

$0.87/ft

Flexible Hose Protector with Easy Gripper Coiled attachment eliminates hose crimping at the faucet. Comes complete with Easy Gripper for effortless attachment to the faucet. PART NO.

MFG#

DESCRIPTION

3957499 22703 Flex Hose Protector WATER INLET FITTING

PRICE

$8.36

Chrome plated bronze construction. Standard female swivel hose connection. Includes black plastic watertight plug with stainless steel bead chain. Attaches with three #8 screws. 1/2" pipe size. Flange size is 2-3/4" OD. PART NO.

3957500

MFG#

DESCRIPTION

0499DP0CHR

Each

PRICE

$131.24

PRICE

$9.77

WASHDOWN PRESSURE NOZZLE Constructed of corrosion-free, tough thermoplastic material with stainless steel spring. "Quick-Disconnect" allows you to remove nozzle while pump is on. Adjustable "lock-in" position allows for effortless spraying. Garden Hose thread size 3/4". PART NO.

DESCRIPTION

2712061 Washdown Pressure Nozzle WATER PRESSURE REGULATOR W/GAUGE

PRICE

$41.16

Helps protect plumbing and hoses from damage caused by high-pressure city water. Easy to read dial. Attaches easily with convenient 3/4" garden hose threads. Pressure is factory preset at 40-50 PSI. PART NO.

DESCRIPTION

$7.75

This In-Line Water Nozzle has a Zinc body with an Adjustable Brass tip. It has an insulating soft rubber grip for comfort and easy handling.

PSI rating: 45 PSI Not for hot water or pressurized water systems PART NO.

PRICE

ADJUSTABLE WATER NOZZLE

PRICE

1/4" 3/8" 1/2" 5/8" 3/4" 1"

$13.86

This Industrial Pistol Grip Water Nozzle has a Zinc body with a chrome plated steel lever and a brass pull rod and nut. It has a threaded front for accessories with a removable thread protector. It sprays from a fine mist to a heavy stream.

PRICE

DESCRIPTION

PRICE

INDUSTRIAL WATER NOZZLE

PRICE

3957415 15' $39.12 3957425 25' $51.17 CLEAR PVC TUBING (NYLON REINFORCED) food Heavy duty for hot or cold pressurized water systems (burst pressure 250 lb). Vent and drain lines, bilge pump discharge. Heavy walled FDA GRADE approved vinyl compound, non-toxic, tasteless , odourless. Polyester braid reinforcement. Temperature range: 25°–150°F. 3908025 3908038 3908050 3908058 3908075 3908100 PVC CLEAR HOSE

PART NO.

6914165

$233.11

Blue coiled polyethylene tubing comes with UV resistant plastic garden ends. Stretches to use, coils for convenient storage. PART NO.

This Pistol Grip Water Nozzle has a zinc body with an adjustable Brass Spay Nozzle. The pull rod and nut are also Brass and the Chrome plated steel lever has a soft rubber coating. It also has an insulating soft rubber hand grip for comfort and easy handling.

MFG#

DESCRIPTION

PRICE

7200852 40064 Water Pressure Regulator $29.28 QUICK DISCONNECT COUPLER These Brass water hose Quick Disconnect Couplers make it easy to join your water nozzle with your water supply. Nozzle Hose 6914186 6914185 PART NO.

MFG#

DESCRIPTION

6914185 6914186

QD-WHCF QD-WHNM

Coupler Nipple

WATER HOSE COUPLING

6914180

PRICE

$9.88 $3.60

These Water Hose Couplings come with shut-off valves for easy flow control.

6914181

PART NO.

MFG#

DESCRIPTION

PRICE

6914180 6914181

199-WV 202-WV

In-Line Coupling w/Valve "Y" Coupling w/Valves

$6.76 $15.32

FRESH WATER MANAGEMENT 299


SEAPEX FLEXIBLE PIPING 1/2" ID, 15mm OD flexible piping is produced from high-performance, cross linked polyethylene material. Seapex piping is the only marine grade piping product that is NSF listed, FDA recognized and available in multiple colours for ease of water line identification. Seapex provides the reliability of metal without corrosion and gains the flexibility of plastic with abrasion resistance. Seapex piping cutter is recommended for best results when cutting.

food

GRADE

Operation Pressure: Vacuum to 160 PSI Temperature Range: Max. 100 PSI at 180°F Maximum: 160 PSI at 73°F Minimum Burst Pressure: 215 PSI at 180°F, 480 PSI at 73°F Standard Coil: 250'

NEPTUNE PIPE CONNECTORS Manufactured from high performance plastics and metals the 1/2" flow size connectors are designed for use specifically with Seapex flexible pipe, plastic, brass, copper, and stainless tubing. They are used as a leak free connection with hot, cold, marine, and RV water systems. A leak free connection is made by simply pushing the Seapex piping into the fitting. An o-ring inside the connector seals on the outside of the piping while allowing the piping to rotate under full pressure. The connectors are intended to be used with potable water, beverage, fresh water, salt water, grey, and raw water. Neptune connectors are rated for pressures up to 100 PSI and temperatures of -40°F to +180°F.

PART NO.

DESCRIPTION

7015503 7015504 7015509 7015505 7015510

1/2" ID 15mm OD Green Piping 1/2" ID 15mm OD Red Piping 1/2" ID 15mm OD Blue Piping 1/2" ID 15mm OD Red Piping 1/2" ID 15mm OD Blue Piping

PRICE

$29.50 /50' $56.85 /50' $56.85 /50' $217.17 /250' $217.17 /250'

COLLET COVER

For 15mm OD Fittings PART NO.

7015506 7015511 7015512 7015515 7015516

DESCRIPTION

Plastic Red Collet Cover Plastic Blue Collet Cover White Collet Cover C-Locking Clip O-Ring 15mm

PRICE

$0.46 $0.46 $0.46 $0.46 $3.29

MALE CONNECTOR Male Connector for 15mm OD flexible piping.

SEAPEX PIPING CUTTER

"The right tool for the job". The Seapex cutter is designed for proper cuts to the Seapex piping. This is very important for installing and maintaining a well sealed trouble free system. PART NO.

7015500 7015501

DESCRIPTION

New Style Replacement Blade Cutter

PRICE

$8.05 $27.78

WINDSHIELD WASHER CONTROL VALVE

DESCRIPTION

7015580 12V Brass INLINE SHUT-OFF VALVE

DESCRIPTION

Plastic Male 1/2" NPT Connector Brass Male 1/2" NPT Connector Brass Male 3/4" NPT Connector Plastic Male 3/4" NPT Connector Brass Male 3/4" Garden Hose Thread

PRICE

$228.80

Shut-off Valve for 15mm OD flexible piping.

PART NO.

DESCRIPTION

Plastic Shut-Off Valve

$5.84 $34.30 $22.13 $9.52 $34.59

• Push in to tube stop Push the SeaPex into the fitting, to the tube stop. The collet has stainless steel teeth which hold the SeaPex firmly in position while the "O" Ring provides a leak proof seal. • Pull to check secure Pull on the SeaPex to check the security. It is considered good plumbing practice to test the system prior to use.

Disconnecting

7015525

PRICE

INSTALLING SEAPEX PIPING

A reliable control valve for windshield washer systems. The simple push to connect make installation easy. Works with any fresh water system to provide as much clean water as needed. 15mm inlet 1/4" NPT outlet, 12V brass. PART NO.

PART NO.

7015568 7015562 7015563 7015564 7015565

PRICE

$26.31

300 FRESH WATER MANAGEMENT

• Push in collet and remove SeaPex To disconnect ensure the system is depressurized before removing fittings. Push in collet squarely against face of fitting. With the collet held in this position, the SeaPex can be removed. The fitting can than be re-used.


FOOT MOUNT ELBOW

UNION TEE

STACKABLE TEE

Foot Mount Elbow for 15mm OD Flexible Piping x 1/2" Pipe Thread. Great for shower head mount. PART NO.

DESCRIPTION

7015546

Plastic Elbow

PRICE

$10.23

HOSE BARB

Union Tee for 15mm OD flexible piping.

PART NO.

DESCRIPTION

7015541

PART NO.

DESCRIPTION

Hose Barb

PRICE

$9.87

PART NO.

Stem Elbow

PRICE

$7.31

DESCRIPTION

Check Valve

PRICE

$29.21

PIPE CLIP

PART NO.

7015545

PART NO.

$5.84

PART NO.

7015527

Pipe Clip

PRICE

$0.56

DESCRIPTION

PRICE

$8.78

Male Elbow

$8.40

DESCRIPTION

Plastic Union

PRICE

$5.84

Hose Barb for 15mm OD x 1/2" flexible piping.

PART NO.

7015566

DESCRIPTION

Brass Valve

DESCRIPTION

Hose Barb

PRICE

$9.87

BRASS MALE STEM

PRICE

$47.36

Male Stem for 15mm OD flexible piping.

PART NO.

7015561

DESCRIPTION

Brass 1/2" NPT

PRICE

$23.39

FEMALE SWIVEL CONNECTOR

Female swivel connector for 15mm OD x 1/2" UST.

Female swivel connector for 15mm OD x 3/4" UST.

UST is Universal Straight Thread that fits NPT, BSP and any other 1/2" thread.

UST is Universal Straight Thread that fits NPT, BSP and garden hose thread.

PART NO.

7015570

DESCRIPTION

PRICE

$6.96

Female Swivel

PART NO.

7015571

DESCRIPTION

Female Swivel

PRICE

$11.70

FLOW BEND MOUNT

END PLUG

FEMALE SWIVEL ELBOW

PRICE

HOSE BARB

FEMALE SWIVEL CONNECTOR

DESCRIPTION

PART NO.

7015543

15mm OD Union Stem Check Valve.

Pipe Clip for 15mm OD flexible piping.

7015508

15m Tee

Union Elbow for 15mm OD flexible piping.

Male Elbow for 15mm OD x 1/2" NPT flexible piping.

Brass Male Stem Check Valve for 15mm OD Stem x 1/2" NPT.

PART NO.

PRICE

Plastic Union

UNION STEM CHECK VALVE

MALE STEM CHECK VALVE

7015526

DESCRIPTION

7015542

Stem Elbow for 15mm OD flexible piping.

DESCRIPTION

DESCRIPTION

Union for 15mm OD flexible piping.

MALE ELBOW

STEM ELBOW

PART NO.

7015539 UNION ELBOW

UNION

7015567

PART NO.

$8.78

Plastic Tee

Hose Barb for 15mm OD x 3/8" flexible piping.

7015544

PRICE

Plastic 15mm stackable tee.

Female swivel elbow for 15mm OD x 1/2" UST & 3/4".

Flow Bend Mount available for 15mm OD and 22mm OD flexible piping. End Plug for 15mm OD flexible piping.

UST is Universal Straight Thread that fits NPT, BSP and any other 1/2" thread. PART NO.

DESCRIPTION

7015548 7015549

Swivel Elbow 1/2" Swivel Elbow 3/4"

PRICE

$8.40 $14.26

PART NO. PART NO.

7015528

DESCRIPTION

Plastic End Plug

PRICE

$4.04

7015507 7015607

DESCRIPTION

15mm 22mm

PRICE

$3.29 $9.52

FRESH WATER MANAGEMENT 301


DELUXE FLUSH ELECTRIC TOILET Extremely compact design yet still provides household comfort with its regular size seat. Two models are available. The angled back version yields a minimal footprint and makes it easy to mount against a sloping surface. The vertical back version allows for snug fitting against a straight bulkhead. Both are carefully contoured to conceal the flush pump as well as the plumbing and wiring. This virtually silent system comes with a remote, self priming PAR-MAX pump and has a choice of leaving the bowl wet or dry after use. These toilets feature a multifunction "one touch" control pad offering 4 rinse and flush options, using as little as 1.5L. Can use salt or fresh water to flush. Connections: 3/4" inlet hose, 1" discharge hose Dimensions: 17-1/2" high, 14-3/4" wide, 17-3/4" long

Vertical Back Angled Back

“One-Touch” Control Pad The Jabsco controller is supplied a standard surface mount unit with a clean white bezel.

PART NO.

7920112 7920113 7920124 7920125

MFG#

DESCRIPTION

PRICE

58220-1012 58240-2012 58220-1024 58240-2024

12V Angled Back 12V Vertical Back 24V Angled Back 24V Vertical Back

$1,320.08 $1,397.74 $1,320.08 $1,397.75

Waste-ing Away Waste Retention or Overboard Discharge OPTION 1 OPTION 2

OPTION 3

OPTION 4

Discharge waste through a Y-valve directly into a non-restricted area or to a holding tank when within the 3-mile limit using the toilet’s own pump and an anti-syphon loop.

Collect waste in an on-board holding tank for discharge later to a Shore Station using a dockside suction pump or portable utility pump.

A combination of Option 2 and 3 to give you the flexibility of discharging waste wherever most convenient and without risk to the environment.

Collect waste in an on-board holding tank so that it can be discharged later when you are in un-restricted waters using an electric or manual pump.

302 BLACK WATER MANAGEMENT


ELECTRIC TOILET

The electric toilet is equipped with a dual function pump which eliminates having to mess with hand pumps and dry bowl valves. With the simple push of a button, the self-priming flush pump rinses the bowl as the macerator and high capacity scavenger pump grinds up waste and pumps it out. Included with the toilet is a heavy duty push-button switch and 1" to 1-1/2" hose adaptor for the discharge hose. Inlet 3/4". Outlet 1". Household size bowl complements the luxury of electric flushing with choice of compact bowl where space is at a premium. • Hygienic pure white vitreous china bowl for ease of cleaning. • Stylized, luxury wooden seat and cover with tough baked enamel coating. • Stainless steel and bronze fastenings for reliable salt water service. • Flushing pump self-priming up to 4' (1.2m) vertical lift. • May be mounted 3' (1m) below the waterline. • Equally suitable for overboard or holding tank discharge. • Built-in backflow preventer. • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection). PART NO.

7920012 7920024

REPLACEMENT PARTS Repair Kit Includes: Joker Valve, Wear Plate with O-Ring, Gasket Fiber Washers, O-Ring Bowl/Seal, Base Gasket Seal and Retainer Flexible Impeller

7920101

MFG#

DESCRIPTION

37010-0090 37010-3094

12V Toilet 24V Toilet

7920013 / 7920025

7920020 / 7920021

MFG#

DESCRIPTION

7920101 2116305

37040-0000 6303-0003-P

Repair Kit Impeller

PRICE

$77.69 $34.28

MANUAL TWIST 'N LOCK TOILETS Now available in both Compact and Regular sized bowls, these toilets feature; Hygienic pure white vitreous china bowls with crevice free contours and smooth mouldings for ease of cleaning.

$620.41 $625.04

Macerator Kit Includes: Macerator housing, Centifugal impeller,Motor (motor cover not included), Flexible impeller set screw, o-ring, sealing sleeve, screws, washers, wearplate kit, gasket, body, seal & retainer, slinger, chopper pate

2116305

PART NO.

PRICE

PART NO.

MFG#

DESCRIPTION

7920020 7920021 7920013 7920025

37041-0010 37041-0011 37064-0000 37065-0000

12V Macerator kit 24V Macerator kit 12V Motor Only 24V Motor Only

PRICE

$351.14 $376.68 $225.05 $254.19

Automatic vacuum breaker and an angled pump housing with a long stroke for easier pumping and ease of installation; Twist 'n' Lock safety handle and flush control lever; A powerful Self-Priming pump for above or below waterline installation that is also reversible mounting for choice of right or left handled installation. Fittings: Connections for 3/4" (19mm) ID inlet hose  1-1/2" (38mm) ID outlet hose Size: Regular: 18-1/2"W x 19"D x 13-3/4"H Compact: 17-3/4W x 16"D x 13-1/2"H PART NO.

7920000 7920001

DESCRIPTION

Regular Bowl Toilet Compact Bowl Toilet

PRICE

$258.25 $237.04

Service Kits Include: Cap (x2), base valve gasket, seal housing assembly, top valve seat, top valve gasket, ring (flush lever), screw (flush lever), buffer screw (valve cover), o-ring (piston), screw (pump cylinder), joker valve, and valve spring.

REPLACEMENT PARTS

7920005 7920006

MFG#

29120-5000 29090-3000

PART NO.

MFG#

DESCRIPTION

7920004 7920006 7920015 9908092

29098-1000 29040-3000 29042-0000 29092-1000

Hinge Kit (Compact Toilet) Pump Assembly Top Valve Gasket Joker Valve

7920002 PRICE

$13.68 $133.59 $17.66 $15.93

7920018

7920019

PART NO.

MFG#

DESCRIPTION

7920005 7920002 7920018 7920019

29097-1000 29045-0000 29045-2000 29045-3000

Compact Seat Assembly Repair Kit (Up to 1997) Repair Kit (1998 to 2007) Service Kit (From 2008)

PRICE

$80.18 $101.91 $99.99 $99.99

BLACK WATER MANAGEMENT 303


TECHMA WHITE ELECTRIC TOILET EASYFIT

High Profile 13" 33 cm 14.3" 36.3 cm

30.2" 76.6 cm

18.7" 47.4 cm

16.6" 42.0 cm

17.4" 44.3 cm

17.4" 44.2 cm

11° 12.3" 31.3 cm

7.8" 19.7 cm

7.6" 19.4 cm

Weight: 45 lbs.

Low Profile Compact, water-saving, quiet, space-saving marine toilet that conserves water without sacrificing performance. The 6' of vertical lift makes for installation flexibility. A simple switch (included with the required Fresh Water or Raw water kits), allows you to press up to add water and press down to flush, leaves a clean, dry bowl after every flush. Comfortable wood seats add to the attractive china styling.

13" 33 cm 14.3" 36.3 cm

27" 68.7 cm 14.3" 36.3 cm

13.5" 34.1 cm

11° 12.3" 31.3 cm

Requires an EasyFit Fresh or Raw Water Kit listed below

Kit includes Harness, Solenoid, Switch and mounting hardware. Choose either Fresh or raw water as well as voltage to complete your new installation.

18.7" 47.4 cm

7.8" 19.7 cm

PART NO.

7920250 7920251 7920252 7920253 7920255 7920256 7920257 7920258

14.3" 36.3 cm

Weight: 43 lbs.

7.6" 19.4 cm

MFG#

DESCRIPTION

PRICE

38485 38489 38486 38490 38670 38680 38671 38681

High Profile White, 12V High Profile White, 24V Low Profile White, 12V Low Profile White, 24V Fresh Water Kit, 12V Fresh Water Kit, 24V Raw Water Kit, 12V Raw Water Kit, 24V

$1,185.92 $1,201.09 $1,185.92 $1,201.09 $112.03 $112.03 $112.03 $112.03

DOMETIC FOOT PEDAL GRAVITY DISCHARGE TOILET 510+ Dometic 500 series marine toilets provide ultra low-flush water conservation and trouble-free performance while providing all the comforts of a household toilet. Easy pedal operation enables hands-free flushing. The Dometic 510+ foot-pedal toilet provides the ultimate water-conserving, yet powerful flush using less than 1 pint (0.10 gal./0.39 l) of water. Designed to install directly above a holding tank, 500 series toilets feature a patented flush mechanism that creates an airtight seal between the head compartment and the bad smells of the holding tank. The elongated seat and deep bowl provide the most home-like comfort available in pedal-flush toilets. This standard height model is available in white or bone color fixtures. Designed to mount over a 2 bolt 3" closet flange which is ordered separately. Water connection is 1/2" MPT.

7920050

7920056

7920055

PART NO.

TRAVELER 711-M28 MARINE SANITATION SYSTEM

COLOUR

7920045 7920046 7920050 7920052 7920053 7920055 7920056

7920052 DESCRIPTION

Bone 18-3/4"H x 15-1/4"W x 20-1/2"D White 18-3/4"H x 15-1/4"W x 20-1/2"D 2 & 4 Bolt, Floor Flange–3" Spigot 2 & 4 Bolt, Floor Flange–3" Socket Up to 2006, Floor Flange Seal Up to 2006, Vacuum Breaker Up to 2006, (Ball, Shaft, Cartridge)

7920053 PRICE

$537.00 $537.00 $26.67 $26.67 $48.36 $75.41 $86.85

Complete freshwater system in one self-contained package. Ideal replacement for recirculating toilets. No recirculating chemical smell. Easy to use. Water level and flushing action controlled by single pedal control. Proven reliability. Halfball seal keeps tank odours in tank. Holding tank is moulded of durable linear low-density polyethylene with 9.5 Gallon (36L) capacity. Discharge connection is 1-1/2" (38mm) hose insert. Vent connection is for 5/8" (16mm) hose. Water connection is 1/2" (13mm) MPT. PART NO.

7920049 PART NO.

7920064

7920065

7920066

304 BLACK WATER MANAGEMENT

7920064 7920065 7920066

DESCRIPTION

Bone in Colour DESCRIPTION

Water Valve Base Seal Vacuum Breaker

PRICE

$853.10 PRICE

$79.80 $72.75 $75.41


972 PORTABLE TOILETS 2.8 GAL FULL-SIZE PORTABLE TOILET WITH PUSH-BUTTON FLUSH Powerful flushing at the touch of a button without constant pumping or batteries sets the SaniPottie 972 Portable Toilet apart from the rest. Contemporary styling complements modern boat designs. Prismatic tank level indicator allows easy tank level monitoring and its high-strength ABS construction withstands harsh environments; giving a smooth, easy-to-clean finish. Includes brackets for secure installation to floor. Available in tan or gray colors. Model #972 12-1/2"H x 13-1/8"W x 15-1/4"D Easy push button opereation

PART NO.

MODEL #

DESCRIPTION

7920095 7920096

972 972

Tan, 2.8 Gallons no Brackets Grey, 2.8 Gallons no Brackets

PRICE

$199.88 $199.88

974 MSD PORTABLE OR PERMANTENT TOILETS 2.6 GAL

FULL-SIZE PORTABLE TOILET WITH PUSH-BUTTON FLUSH Powerful flushing at the touch of a button without constant pumping or batteries sets the SaniPottie 974MSD Portable Toilet apart from the rest. Contemporary styling complements modern boat designs. Prismatic tank level indicator allows easy tank level monitoring and its high-strength ABS construction withstands harsh environments; giving a smooth, easy-to-clean finish. Includes brackets for secure installation to floor. Available in tan or gray colors. The MSD series can be portable and/or permanently installed. It includes mounting bracket, discharge and vent fittings for permanent installation (Type III MSD).

Model # 974 MSD 2.6 gal. capacity 12-1/2"H x 13-1/8"W x 15-1/4"D PART NO.

7920040 7920041 Easy Monitoring

Rear View

MFG#

DESCRIPTION

301197406 301197402

Grey, 2.6 Gal w/Brackets Tan, 2.6 Gal w/Brackets

PRICE

$251.85 $251.85

Brackets included

975 PORTABLE TOILETS 5.0 GAL FULL-SIZE PORTABLE TOILET WITH PUSH-BUTTON FLUSH Powerful flushing at the touch of a button without constant pumping or batteries sets the SaniPottie 975 Portable Toilet apart from the rest. Contemporary styling complements modern boat designs. Prismatic tank level indicator allows easy tank level monitoring and its high-strength ABS construction withstands harsh environments; giving a smooth, easy-to-clean finish. Includes brackets for secure installation to floor. Available in tan or gray colors.

Model #975 15-1/4"H x 13-1/8"W x 15-1/4"D

Easy push button opereation

PART NO.

MODEL #

DESCRIPTION

7920093 7920094

975 975

Tan, 5.0 Gallons w/Brackets Grey, 5.0 Gallons w/Brackets

PRICE

$259.86 $259.86

975 MSD PORTABLE OR PERMANTENT TOILETS 5.0 GAL FULL-SIZE PORTABLE TOILET WITH PUSH-BUTTON FLUSH Powerful flushing at the touch of a button without constant pumping or batteries sets the SaniPottie 974MSD Portable Toilet apart from the rest. Contemporary styling complements modern boat designs. Prismatic tank level indicator allows easy tank level monitoring and its high-strength ABS construction withstands harsh environments; giving a smooth, easy-to-clean finish. Includes brackets for secure installation to floor. Available in tan or gray colors. The MSD series can be portable and/or permanently installed. It includes mounting bracket, discharge and vent fittings for permanent installation (Type III MSD).

Model # 975 MSD 5.0 Gal. capacity 15-1/4"H x 13-1/8"W x 15-1/4"D PART NO. Easy Monitoring

Rear View

Brackets included

7920042 7920043

MFG#

DESCRIPTION

301197506 301197502

Grey, 5.0 Gal w/Brackets Tan, 5.0 Gal w/Brackets

PRICE

$287.85 $287.85

BLACK WATER MANAGEMENT 305


RUN-DRY MACERATOR PUMP

PORTA-POTTI 2.6 GAL.

Now fitted with an exclusive, Run-Dry protection device detects the absence of fluid then shuts off pump before impeller is damaged.

Refreshed, modern appearance with a cleaner seat and cover design. More-ergonomic carrying handle and lid latch is now standard. Redesigned valve handle, fill cap & pump. Fresh and waste water tanks have a 2.6 gallons capacity.

Flow rate to 12 GPM. Self priming to 4'. Vertical Lift, Inlet 1-1/2" Hose Barb or 1-1/2" NPT, Discharge 1" Hose Barb. Service Kit Includes: Gasket, O-ring, Impeller and Seal.

Average flushes: 27 Available with bellows or piston flush and MSD. PART NO.

7920200 7920201 7920202

MFG#

DESCRIPTION

92861 92828 92868

260B Bellows Flush 260P Piston Flush 260P Piston Flush w/ MSD

PRICE 7921052 Service Kit

$160.15 $197.18 $237.70 PART NO.

PORTA-POTTI CURVE

7921050 7921051 7921052 2116305 The Porta-Potti Curve has a comfortable seat height, battery-powered flush level indicators for fresh- (4 gallons) and waste- (5.5 gallons) water tanks, improved water tank carrying handle and optional holddown bracket. The increased bowl size, hidden controls, user-friendly flush lever and integrated toilet tissue holder give it a sleek, modern design. Average Flushes: 56

PART NO.

7920209 7920210

MFG#

DESCRIPTION

92306 92415

Porta-Potti Curve Porta-Potti Curve Bracket

PRICE

$274.13 $36.29

TOILET SEATS

MFG#

DESCRIPTION

18590-2092 18590-2094 18598-1000 6303-0003-P

12V 24V Service Kit Impeller

PRICE

$216.45 $278.11 $88.90 $34.28

MACERATOR PUMP

This Macerator Pump has a Phenol Plastic body with a thermoplastic Polyester housing and built-in thermal protection. The shaft is Stainless Steel. Inlet Connection: 1-1/2" Outlet Connection: 1" Capacity: 10 GPM (37L/min)

PART NO.

MFG#

DESCRIPTION

PRICE

7921055

10-24453-01

12VDC, 15A

$230.47

T-SERIES DISCHARGE AND MACERATOR PUMP Runs dry without harm. • Unlike impeller-type pumps, unique bellows pump can run dry without damage. • Draws only 6A at 12VDC. • Self-priming up to 10'. (3.3 meters) of water. • Handles up to 270 gallons (1022L) per hour.

Bucket not included These Roto-Molded heavy duty Universal portable potty Toilet Seats have built in handles and fit 5 gallon buckets. PART NO.

MFG#

DESCRIPTION

PRICE

7920198 7920199

10367 10366

Tan Toilet Seat White Toilet Seat

$74.94 $74.94

306 BLACK WATER MANAGEMENT

Size: 12-3/4"L x 7-1/2"H x 7-1/4"W PART NO.

7920072 7920073 7920061

DESCRIPTION

PRICE

12V 24V S/T Pump Duck Bill

$569.31 $569.31 $54.32


"Y" VALVE

HOLDING TANK SYSTEMS Lockable selector lever. Ports can be rotated so discharge plumbing can be routed away in parallel, at 90° in opposite directions, or either up or down without disassembly. Self-cleaning design provides easy operation. Supplied with 1-1/2" ports and extra 1" straight inlet port.

PART NO.

7557149

MFG#

DESCRIPTION

45490-1000

1-1/2"

VENT LOOPS

PRICE

$104.01

Moulded of rugged nylon. Smooth inside for maximum flow through. Prevents siphoning of water into your boat. Fits marine sanitation hose. For use with toilets mounted below water line.

PART NO.

7920075 7920150

DESCRIPTION

3/4" with 1/4" Vent (no check valve) 1-1/2" with 5/8" Vent (check valve)

PRICE

$32.21 $39.70

TANK WATCH 4 LEVEL MONITOR SYSTEM Micro float switches indicate empty, low, mid and full. One light only will indicate at a time to eliminate confusion. No electrical components come in contact with waste or water. Operates on 12 or 24VDC. Can be used for fresh, grey, or black water. Includes probe cap with three micro float switches with 5/8" vent hose connection, indicator panel, gasket, and stainless steel mounting hardware. PART NO.

980041

DESCRIPTION

With Vent and 22" Probes

PRICE

$468.25

TANK WATCH 1 HOLDING TANK ALERT SYSTEM 12/24V Highly reliable micro float switch activates a red warning light when tank is full. No electrical components come in contact with waste-no messy probes to clean. Installs easily on any rigid tank material. Operates on 12/24VDC. Includes micro float switch, panel, & gasket. PART NO.

980040

DESCRIPTION

Holding Tank Alert System

ODOUR FREE, PREMIUM QUALITY PERFORMANCE

Dimensions: • 28 Gl. 19.5"H x 19.0"W x 30.0"L • 40 Gl. 20.0"H x 21.0"W x 35.0"L Boatowners can now realize the benefits of a user friendly, properly sized holding tank. Designed for virtually any type III MSD system, they use top mounted fittings and Diptube discharge plumbing to prevent potential leaks. Multiple discharge outlets eliminate the need for complex plumbing and extra discharge line connections. These corrosion-proof, leak-proof and odour-proof high density polyethylene tanks include a T-series discharge pump, a DTM04 four-level tank monitoring system, a Vent Filter and a tank saver relief valve, all pre-plumbed and pre-tested. They are easy to install with no solvent bond connections required. Inlet and Discharge Plumbing 1.5" ID Sanitation Hose. Vent Plumbing 5/8" ID Sanitation Hose. Note: For best results, filter should be changed every season. ISO/USCG Compliant. PART NO.

7015328 7015329 7015340 7015341 7920069

MFG#

DESCRIPTION

322012812 322012824 322014012 322014024 309311001

28 Gl., 12V, 6A 28 Gl., 24V, 3A 40Gl., 12V, 6A 40 Gl., 24V, 3A Tank Vent Filter

PRICE

$1,965.27 $1,965.27 $2,150.68 $2,150.68 $139.47

WATER AND HOLDING TANKS

food

GRADE

PRICE

$210.89

ECO HOLDING TANK VENT FILTER KIT

Dimensions: 18.125" x 3.125" (460 x 79mm). Length includes hose adapters. PART NO.

7920069 7920068

The concave shape of the filter assures that malodorous gases are completely filtered through activated odour adsorbing charcoal . Earth-Friendly recyclable plastic components fits in the same installation brackets as older models. Hose adapters for the most popular vent hose sizes are included with the complete vent filter kit. Hose Adapters: 5/8" (16mm), 3/4" (19mm), 1" (25mm), 1-1/2" (38mm).

MFG#

DESCRIPTION

309311001 309311002

Complete Vent Filter Kit Replacement Cartridge

PRICE

$139.47 $127.35

WATER & HOLDING TANK ACCESSORIES Fitting Relocation Kits enable a boater to plug up existing threaded fitting openings and to custom position the new fitting openings anywhere on the tank. Instructions included. PART NO.

7015110 7015010

DESCRIPTION

Holding Tank Relocation Kit Water Tank Relocation Kit

PRICE

$88.19 $66.15

These water/holding tanks are constructed and designed to meet both water and holding applications. All tanks are constructed from polyethylene making it strong and durable. The openings are all standard sizes and easily adapt to any vessel. These tanks have all female NPT openings consisting of, two 1-1/2" fill, one 1/2" vent, and one 1/2" supply. All of the openings are located on one end of the tank. • Fitting kits are not included • Complies with FDA regulations CFR 177.1520 • Meets Coast Guard standards PART NO.

7015206 7015209 7015213 7015220 7015235 7015255

GAL

DESCRIPTION

6 9 13 20 35 55

16"L x 12"W x 8"H 17"L x 14"W x 10"H 24"L x 10"W x 14"H 30"L x 16"W x 10"H 36"L x 15"W x 16"H 54-1/2"L x 13"W x 20"H

PRICE

$125.67 $161.71 $188.91 $226.69 $320.43 $458.83

BLACK WATER MANAGEMENT 307


BLUE GRANULAR

TOILET BOWL AND SEAL CLEANER

Sealand Toilet Bowl & Seal Cleaner is formulated to dissolve mineral deposits that can build up over time – especially between the flush ball and bowl seal on many marine and RV toilets which can result in slow leaks if not periodically cleaned. The thick Sealand formula stays under rim and requires 20% less than other cleaners. Fresh mint scent. Septic-safe, biodegradable.

Canada's leading Granular formula for waste holding tanks. Long term Eco-odour control is made easy with instant and time release agents. Developed for airlines & the military this product is ideal for Marine & RV use. This product also contains a lubricant to protect shafts and seals. One ounce per gallon. PART NO.

7920076

MFG#

DESCRIPTION

4070

Blue Granular, 400g

PRICE

$21.27

CAN-AD HOLDING TANK TREATMENTS PART NO.

MFG#

DESCRIPTION

7920088

379721601

26 fl. oz.

PRICE

$10.12

SEALAND 1-PLY RAPID DISSOLVING TOILET TISSUE

• Biodegradable • All Natural: Contains no dyes or perfumes • Disintegrates rapidly, keeps your entire system clog-free • 400 1-ply sheets per roll PART NO.

DESCRIPTION

7920035

4 Roll Package

PRICE

$5.43

SEALAND ULTRA TOILET TISSUE, 2-PLY

Completely eliminates tank odours without killing the natural biological process and without masking odours with perfumes. It prevents clogging by breaking down waste and tissue and by lubricating valves. Great for all holding tanks, gray water tanks and septic tanks as it is 100% Biodegradable and completely safe for the environment. PART NO.

5492150 5492152

PART NO.

DESCRIPTION

4 Roll Package

TOILET TISSUE AQUASOFT

Can-Ad Liquid, 1L Can-Ad Dry, 1L

PRICE

$13.47 $10.89

Cleans and treats the ENTIRE sanitary system by thoroughly removing encrusted and clinging solids that contain bacteria, the source of smelly odours. A special deodorizer neutralizes any smells that remain in porous plastic walls and liners. Stains and odours in toilet bowls are quickly removed. Seals remain unaffected.

PRICE

$8.86

DESCRIPTION

367 365

HOLDING TANK CLEANER & SHOCK TREATMENT

Specially made to work in low water use toilets. Zipper seal bag helps keep tissue dry and clean. Soft 2-ply sheets, 500 sheets per roll. Breaks up quickly, prevents clogs. Biodegradable. 7920034

MFG#

PART NO.

5492155

MFG#

DESCRIPTION

369

Hold Tank Shock Treat 1L

PRICE

$15.10

DRINKING WATER FRESHENER Thetford Corp 4 Pack RV/Marine Toilet Tissue is recommended for marine sanitation systems. It is snowy white, soft and gentle and dissolves quickly. 100% biodegradable.

PART NO.

7920037 7920038

MFG#

DESCRIPTION

20804 03300

1-Ply, 350 sheets/roll 2-Ply, 396 sheets/roll

Drinking Water Freshener completely gets rid of musty, mouldy, plastic and anti-freeze tastes and leaves no detectable after taste. For use in both hot and cold water systems using plastic, fiberglass or metal tanks. Makes stored water taste sparkling fresh and clean. Contains no Chlorine. 225g.

PRICE

$4.55 $8.00

TOILET PAPER HOLDER PART NO.

5492175

MFG#

DESCRIPTION

641

Drinking Water Freshener

PRICE

$9.55

PURGE TANK CLEANER 7201270

7201271

The Purge Tank Cleaner completely REMOVES organic slime from fresh water tanks... the source of recurring bad tastes. It ensures good tasting water, ice cubes and beverages with no after taste whatsoever. Eliminates "rotten egg" smell from hot water heaters. It is also a quick spot deodorizing of gray and black water tanks and is very effective on a wide variety of stains and odours. Includes measuring scoop. 450g.

Unique lid design that keeps paper dry and holds the roll securely in place. Flat back comes drilled with four mounting holes. The recessed holder has a sleek low profile and keeps tissue dry and out of site. Covered toilet paper holder: 5-1/2" W x 6"H x 5-1/4"D Recessed toilet paper holder: 7-5/16"W x 7-1/4"H x 5-5/16D  Cut out - 6-1/8"W x 6"H PART NO.

MFG#

DESCRIPTION

7201270 7201271

31000000 30800000

Covered Toilet Paper Holder Recessed Toilet Paper Holder

PRICE

$45.19 $47.36

308 BLACK WATER MANAGEMENT

PART NO.

5492170

MFG#

DESCRIPTION

228

Purge Tank Cleaner

PRICE

$16.14


MARINE HOLDING TANK TREATMENT

Marine Holding Tank Treatment decomposes waste into odourless by-products and prevents recurrence of foul odours. It's effective against organic waste, proteins, cellulose (tissue), oils and greases and has a lime fresh fragrance.

PART NO.

5492165

MFG#

DESCRIPTION

360

Hold Tank Treatment, 1L

PRICE

AQUA-KEM HOLDING TANK DEODORANT Aqua-KEM is a powerful odour control that liquefies waste and breaks down tissue fast to prevent clogging. It contains powerful detergents that work around the clock in all weather conditions to clean tank walls and drain lines. 100% biodegradable. PART NO.

MFG#

DESCRIPTION

7920296 7920297 7920298 7920299

24488 24807 14762 28729

8 pk, 2 oz. Foil Pouches (dry) 6 pack, 8 oz., Bottle 32 oz., Bottle 1/2 gallon, Bottle

AQUA-KEM® SHOTZ HOLDING TANK DEODORANT

These powerful Aqua-Kem® Shotz have superior waste digestion. Each toss-in pouch contains rapid dissolving micro-concentrates that quickly deodorize your holding tank and break down waste materials to prevent clogs

This lemon scented toilet treatment for holding tanks is Biodegradable, no formaldehyde. It is non-staining and self lubricating for drain valves. One ounce treats five gallons. PART NO.

MFG#

DESCRIPTION

071716C

16oz.

$15.57 $20.59 $12.66 $22.82

$15.18

INSTANT FRESH TOILET TREATMENT

5491340

PRICE

PRICE

$18.27

ODOUR STOP

No Measuring, Spills or Mess 100% Biodegradable. PART NO.

MFG#

DESCRIPTION

7920295

96318

Tossins, 24 Pcs.

PRICE

$34.98

ODOUR GUARD SURFACE CLEANER/ DEODORIZER/FRESHENER Odour Stop is odourless, water based and biodegradable. Captures odours in seconds for indefinite relief. It is used as an air or surface spray and does not require rinsing. Works on smoke, pet happenings, moth balls, human waste, skunk, petroleum fuels and much more. 935ml

PART NO.

5492120

MFG#

DESCRIPTION

298

Odour Stop

Uses cutting-edge ingredients that actually capture foul odours to eliminate them on contact. It can be used on most fabrics/carpeting to remove unwanted odours, on hard surfaces as a cleaner, or as an air freshener. The non-toxic formula makes it safe for use around people & pets.

PRICE

$13.51

PART NO.

ADVANCED HOLDING TANK TREATMENT

Advanced Holding Tank Treatment is unscented and contains No Dyes. It is an instant deodorizer and it decomposes and liquefies organic waste, Oils, greases and cellulose (tissue). It is non-toxic, non-polluting and completely compatible with septic systems. Well suited for grease traps and gray water systems. PART NO.

5492160

MFG#

DESCRIPTION

362

Advanced Tank Treatment

PRICE

$15.18

SEALAND LIQUID HOLDING TANK DEODORANT

PART NO.

DESCRIPTION

8oz. (4 pk)

PRICE

$40.25

PRICE

$20.70

Converts stubborn odours and stains completely into odourless non-toxic gases. It is a water-based product that biodegrades rapidly and has a pleasant scent. Removes oils, greases, beverage stains, urine, blood or smoke from carpets, closets, counter tops, curtains, cushions, drains, refrigerators, fish and bait boxes. PART NO.

5492125

DESCRIPTION

670 mL

PRICE

$16.47

BOAT CLEAN/DEODORIZER SPRAY Marine Re-Fresh is the absolute odour control for all hard or soft surfaces. Helps prevent mildew stains and is perfect for rugs and sail lockers.

Sealand's deodorants contain the most effective odour control ingredients available. Powerful cleaning action breaks down waste and tissue while giving a pleasant floral-mint fragrance. Works in both cold and hot conditions. 7920074

DESCRIPTION

5490501 22 oz. STAIN & ODOUR REMOVER

PART NO.

5490500

DESCRIPTION

900 mL

PRICE

$19.18

BLACK WATER MANAGEMENT 309

Water Management  

Water Management

Water Management  

Water Management