Page 1


Man and fire Man and fire have forever evolved side by side, and their common development has lead to stunning nature feats. From cave men who used to make sparks with two pieces of flint stone until modern men who have fully domesticated fire, the quest for mastering fire has always been a thrilling and fascinating experience. Domesticated fire has become the companion of everyday life and a source of inspiration, it draws attention and creates a relaxing and emotional atmosphere. Beautiful, voluptuous flames are a testimony of this element’s warm influence and power. JidÊ’s aim is to maintain the balance between nature and the innovative discoveries of our time by designing a variety of wood fireplace inserts that are perfectly in line with the requirements of daily life, and that combine quality and operability, safety and heat efficiency, sustainability and economic efficiency, aesthetics and comfort. We are proud to introduce our philosophy with this brochure. We wish you a pleasant reading.


Contents

a

New Eco-labelled combustion

06 Decor Plus with side door 08 Decor Plus, double-sided with side door 10 Decor Plus with lifting door 12 Nordic ventilation Integrated 16 Nordic ventilation Hanging 18 Cosi

b

Conventional combustion

22 Decor with side door 24 Ultra 26 Maxivision 28 Maxi 43 Basic

c

Housings

32 33 34 35 39 38

Wall space Central space Free space Maxivision / Nordic Wall-hung Free space DĂŠcor PLUS Cub et Face one

Tailored

Aqua Air Flow

d e f g

Accessories

Better understanding means better purchasing


a

New Eco-labelled combustion 06 Decor Plus with side door 08 Decor Plus, double-sided with side door 10 Decor Plus with lifting door 12 Nordic ventilation Integrated 16 Nordic ventilation Hanging 18 Cosi

Discover new eco-labelled combustion techniques Cutting-edge technique is what enables Jide to constantly improve its products and combine their aesthetic features with innovative combustion techniques. This is how we designed our new Nordic and Decor product ranges, which are equipped with a new combustion technique. As in traditional models, a primary air intake sends air through the grate into the combustion chamber, enabling the fire to start and quickly reach a high temperature. Once the grate is closed (required), pre-heated secondary air is then sent toward the flames and tertiary air. The secondary air generates post-combustion by re-burning the gases, while the tertiary air has as a “turbo� effect and sweeps the glass clean. The advantages of such balanced combustion are obvious: increased heat efficiency, lower wood consumption, as well as lower CO2 and fine dust emissions. Our Decor Plus range is designed for very isolated houses, these products can be installed with a Controlled Mechanical Ventilation (CMV) system and are compliant with the requirements and characteristics of low-energy houses. These airtight inserts come with an external combustion air intake which allows for significantly improved thermal comfort and well maintained CMV balance.


a

Decor Plus with side door

• • • • •

504

625

504

120

120

625

0

766

700

20

Ø100

50

50

A

0

0

A

14

5

Ø100

996

0

20

14

0

5

Ø100

696

DECOR Plus with side door

67 Plus

77 Plus

16/9 Plus

70 Plus

Kw power

6<10kw

7<11kw

8<12kw

7<10kw

Ø 150

Ø 180

Ø 200

Ø 180

Flue diameter Combustion air intake

Ø 100

Ø 100

Ø 100

Ø 100

622 x 449

722 x 449

949 x 449

641 x 641

175

175

175

175

750m³/hour ventilation kit - centrifuge + speed control 210mm clearance required below stove (accessible through the fire)

Air control

70-mm finish frame – 4 sides

Warm air nozzle 150 mm diameter +stop air

Speed variator with remote control

Door dimensions Distance from back of stove to centre flue (A) Options/Decor Plus

Single-sided inserts are compliant with din+ label requirements.

All measurements are in mm.

5

695

20

666

14

120

5

0

1000

0

817

Ø100

14

Décor 70 Plus

50

A

0

504

20

120

New combustion technique: primary, secondary and tertiary air are adjusted by the same control (post-combustion). Door: contemporary design with screen-printed glass. Frameless finish is possible. Natural or ventilation-forced convection. Warm air stream above the door with possible installation of 2 air outlets. Clean-glass system. Vermiculite inside. Manual adjustment of air intake. Adjustable legs. Ember retainer. Reinforced baffle. External air outlet connection diameter is 100mm. Manual ashtray.

A

625

Décor 16/9 Plus

All the combustion air can be taken from outside (an important feature for CMVs and passive houses).

Décor 67 Plus

Airtight insert:

770 50

Décor 77 Plus

670

New Eco-labelled combustion


06|07

DĂŠcor 16/9 Plus

a

New Eco-labelled combustion DĂŠcor 16/9 Plus

Decor Plus with side door


a

Decor Plus, double-sided with side door

New Eco-labelled combustion

• • • • • • •

90 20

0

14

504

20

0

766

DECOR DF with side door

5

625

90

Ø100

5

58

A

14

5

Ø100

996

77 DF Plus

16/9 DF Plus

7<10kw

8<11kw

Flue diameter

Ø 200

Ø 200

Combustion air intake

Ø 100

Ø 100

722 x 449

949 x 449

292,5

292,5

750m³/hour ventilation kit - centrifuge + speed control 210mm clearance required below stove (accessible trough the fire)

Air control

• (x1)(x2)

• (x1)(x2)

Warm air nozzle 150 mm diameter +stop airr

Speed variator with remote control

Kw power

Door dimensions Distance from back of stove to centre flue (A) Options/Decor DF Plus

70-mm finish frame – 4 sides

DF : Double Sided

All measurements are in mm.

1000

120

5

Décor 16/9 DF Plus

58

A

504

770

120

New combustion technique: primary, secondary and tertiary air is adjusted by the same control (post-combustion). Door: contemporary design with screen-printed glass. Frameless finish is possible. Natural or ventilation-forced convection. Warm air stream above the door with possible installation of 2 air outlets. Clean-glass system. Vermiculite inside. Manual adjustment of air intake. Adjustable legs. Ember retainer. Reinforced baffle. External air outlet connection diameter is 100mm. Manual ashtray.

625

Décor 77 DF Plus

All the combustion air can be taken from outside (an important feature for CMVs and passive houses).


DĂŠcor 16/9 DF Plus

Decor Plus, double-sided with side door

a

New Eco-labelled combustion

08|09 42|43


a

Decor Plus with lifting door

New Eco-labelled combustion 835

752 1570

674

674

1335

Décor 84 PLDF Plus

752 1570

144

144

764

1015

693

1015

Ø125

48

5

946

Ø150

62

6

946

84 PL Plus

84 PLDF Plus

16/9 PL Plus

16/9 PLDF Plus

9<12kw

9<12kw

10<14kw

10<14kw

Flue diameter

Ø 250

Ø 250

Ø 250

Ø 250

Combustion air intake

Ø 125

Ø 150

Ø 125

Ø 150

733 x 640

733 x 640

911 x 431

911 x 431

165

313

165

313

750m³/hour ventilation kit + speed control 210mm clearance required below the stove (access by the inside)

70mm frame – 4 sides

• (x1)(x2)

• (x1)(x2)

Warm air nozzle – 150 mm diameter

Speed variator with remote control

DECOR Plus with lifting door Kw power

Door dimensions Distance from back of stove to centre flue (A) Options/Decor PL Plus

DF : Double-Sided - PL : Lifting Door

Inserts are compliant with din+ label requirements.

All measurements are in mm.

6

469

Ø150

62

764

144

5

1306

Ø125

48

975

Décor 16/9 PLDF Plus

693

469

144

1335

975

1306

New combustion technique: primary and secondary air. Door: contemporary design with screen-printed glass. Frameless finish is possible. Convection can be natural or forced with 750m3 ventilation (optional). Obligation : installing two warm-air exits is compulsory. External air intake for combustion. Primary and secondary air is adjusted with the same control. Vermiculite inside. Adjustable legs. Double baffle for double-sided inserts. “Double-sided” inserts come with two lifting doors, but it is recommended that one of them be always kept closed when the insert is working. “Single-sided” inserts come with an automatic shutter on the flue damper, which provides higher thermal efficiency. The automatic shutter folds up automatically when the door is lifted. Manual ashtray. 50mm back frame included.

Décor 16/9 PL Plus

Décor 84 PL Plus

835


a

New Eco-labelled combustion

DĂŠcor 84 PL Plus

DĂŠcor 16/9 PL Plus

Decor Plus with lifting door

Jide: innovative, comfortable, cost & energy efficient heating.

10|11


a

Nordic ventilation Integrated

New Eco-labelled combustion

22

22

0

• • • • • • •

600

402

Nordic 67/60

540

342

0

670

29

0

29

0

100 49

0

100 49

1000

0

770

NORDIC

58/54

67/60

77/60

16/9

Kw power

6<8kw

7<9kw

8<11kw

9<13kw

Flue diameter

Ø 150

Ø 150

Ø 180

Ø 200

532 x 389

622 x 449

722 x 449

949 x 449

Additional one-piece frame with 4 sides

2 warm-air nozzle kit, 125 mm diameter + stop air

Speed variator with remote control

Door dimensions Options/Nordic

Inserts are compliant with din+ label requirements.

All measurements are in mm.

580

600

100 42

400

0

Nordic 16/9

100

42

600

402

New combustion technique: primary, secondary and tertiary air. Door: contemporary design with screen-printed glass (New Look door). One-piece finish frame with three 40mm sides. Warm-air stream above the door. Vermiculite inside. Stainless steel baffle. Ashtray. Temperature control with sensor. Double grate for primary air intake shutting with automatic closure. Flap cap. Air control. Two integrated centrifuge fans (2x140m3/h) Speed control. Nozzle in stainless, angled 45° for the flue connecting.

Nordic 77/60

Nordic 58/54

0


12|13

Nordic 67/60

a

New Eco-labelled combustion

Nordic 16/9

Nordic ventilation Integrated

Nature gave us a gift to help us protect the environment: wood. Global warming, climate change... Nowadays, these topics are discussed on a daily basis, and have fortunately aroused our desire to maintain a safe and sustainable environment. Man is now aware of those issues and should therefore act with utmost care, notably by fostering renewable energies, and the use of wood as a fuel has an excellent image in this regard. In comparison with other fuels, wood is definitely an environmental miracle: Trees store a lot of carbon gas when they grow. When wood burns, it only releases the carbon gas it has stored during growth, and it doesnâ&#x20AC;&#x2122;t release more than it would with natural decomposition. Forest re-planting is encouraged when CO2 is released in this way into the air: the quantity of CO2 remains the same. i.e carbon neutral As a fuel, wood is not subject to any shortage risks since it exists in great quantities and it renews itself on its own. Wood is available locally and at a reasonable price. Our Nordic, Cosi and Decor Plus ranges are particularly in line with this concept of low consumption. Yet, of course, this does not prevent us from acting in bonus pater familias, and we should avoid wasting wood.


a

Nordic ventilation hanging

New Eco-labelled combustion

29

• • • • • • • • • •

880

680

100

49

0

460

29

0 All measurements are in mm.

750

550

New combustion technique: primary, secondary and tertiary air. Door: contemporary design with screen-printed glass (New Look door). One-piece finish frame with three 40mm sides. Warm-air stream above the door. Vermiculite inside. Stainless steel baffle. Ashtray. Temperature control with sensor. Double grate for primary air intake shutting with automatic closure. Flap cap. Air control. Two integrated centrifuge fans (2x140m3/h) Speed control. Nozzle in stainless, angled 45° for the flue connecting.

Nordic 56/75

Nordic 46/88

0

100

49

0

560

NORDIC

46/88

56/75

Kw power

6<8kw

6<8kw

Flue diameter

Ø 150

Ø 150

399 x 724

499 x 594

Additional one-piece frame with 4 sides

2 warm-air nozzle kit, 100 mm diameter + stop air

Speed variator with remote control

Door dimensions Options/Nordic

Inserts are compliant with din+ label requirements.


a

New Eco-labelled combustion

14|15

Nordic 56/75

Nordic ventilation hanging

Nordic 46/88

Innovation and heat efficiency is Jideâ&#x20AC;&#x2122;s duty, comfortable and economical heat is your right.


a

Nordic ventilation hanging

• • •

• • •

540

377

Nordic 42/54

54

43

420

0

420

28

1,

29

5

0

60 49

0

70

49

0

770

700

NORDIC

42/43

42/54

77/56

70/70

Kw power

5<6kw

5<6kw

10<14kw

10<15kw

Fludiameter

Ø 150

Ø 150

Ø 180

Ø 180

379 x 331

379 x 441

722 x 449

652 x 579

Door dimensions Options/Nordic Additional one-piece frame with 4 sides Warm air nozzle – 125 mm diameter Warm air nozzle – 100 mm diameter

2 warm-air nozzle kit + stop air

Speed variator with remote control

All measurements are in mm.

0

700

54

43

493,5

Nordic 70/70

560

430

264

5

5

402

26

26

Nordic 42/43

New combustion technique: primary, secondary and tertiary air. Door: contemporary design with screen-printed glass (New Look door). One-piece finish frame with three 25mm wide sides. Warm-air stream above the door. Vermiculite inside. 4 adjustable legs for Nordic 70 + 77. Vermiculite baffle (42/43 and 42/54). Stainless steel baffle (70 + 77). Ashtray. Temperature control with sensor. Double grate for primary air intake shutting with automatic closure. Flap cap. Centrifuge ventilation kit, 235m3/hour for 43/42 and 42/54 models, 135mm clearance required below stove (without access by the inside). Centrifuge ventilation kit, 750m3/hour with removable bottom for 70/70 model, 210mm clearance required below stove. Speed control. Air control. Nozzle in stainless, angled 45° for the flue connecting.

Nordic 77/56

New Eco-labelled combustion


New Eco-labelled combustion

Nordic 70/70

Enjoy maximum heat and maximum pleasure !

16|17

Nordic 42/43

a

Nordic ventilation hanging


a

Cosi

New Eco-labelled combustion

• • • • • • • • • •

485

42

0

658

770

485

Airtight insert. External air intake. New combustion technique: secondary and tertiary air. Door: contemporary design with two points of attachment. One-piece finish frame with four 95mm sides. Warm-air stream above the door. Vermiculite inside with bottom in cast iron. Vermiculite baffle. Manual adjustment of combustion air flow. Air control. Two integrated centrifuge fans (2x140m3/h). Speed control. Nozzle in stainless, angled 45° for the flue connecting.

600

Cosi 77/60

600

Cosi 67/60

670

42

0

758

485

600

Cosi 16/9

1000

42

0

Cosi

Ø 100 External combustion air intake (optional)

COSI

67/60

77/60

16/9

Kw power

5<7kw

6<8kw

7<9kw

Flue diameter

Ø 150

Ø 180

Ø 200

2 warm-air nozzle kit, 125mm diameter + stop air

Speed variator with remote control

Options/Cosi

988

Inserts are compliant with din+ label requirements.


a Cosi 77/60

Cosi DF

New Eco-labelled combustion

18|19

• •

485

600

Cosi 77 DF

770

• • •

57

0

758

• • • •

1000

• 485

600

Cosi 16/9 DF

57

0

Cosi 16/9 DF

Airtight insert. External air intake. New combustion technique: secondary and tertiary air. Door: contemporary design with two points of attachment. One-piece finish frame with four 95mm sides. Warm-air stream above the door. Vermiculite insidewith bottom in cast iron. Vermiculite baffle. Manual adjustment of combustion air flow. Air control. Four integrated centrifuge fans (4x140m3/h). Speed control.

988

COSI DF

77 DF

16/9 DF

Kw power

6<8kw

7<9kw

Flue diameter

Ø 200

Ø 200

2 warm-air nozzle kit, 150 mm diameter + stop air

Speed variator with remote control

Options/Cosi DF

Inserts are compliant with din+ label requirements.

Cosi DF

Ø 100 External combustion air intake (optional)


b

Conventional combustion 22 Decor with side door 24 Ultra 26 Maxivision 28 Maxi 43 Basic

Conventional combustion: power and consistence Jide offers very complete models that combine heat comfort, efficiency, sturdiness and power. These models come with the conventional combustion technique, allowing absolutely troublefree use. A primary air intake that sends the air through the grate below the ashes is adjusted by an automatic temperature control. Secondary air is sent near the flames through the air intake used for removing the smoke from the glass. The â&#x20AC;&#x153;double baffleâ&#x20AC;? allows for the fumes to be kept longer in the insert, thus enabling thermal exchanges with the air that is shuffled around the heating unit by the fans.


b

Decor with side door

• • •

504

510

Décor 77

996

DECOR with side door

58

5

A

996

70

77

16/9

16/9 DF

8<11kw

8<11kw

10<12kw

9<11kw

Ø 200

Ø 200

Ø 200

Ø 200

641 x 641

722 x 449

949 x 449

949 x 449

175

175

175

242,5

750m³/hour ventilation kit - centrifuge + speed control 210mm clearance required below stove (accessible through the fire)

frame with 4 sides - 70 mm

• (x1)(x2)

Warm-air nozzle, 150 mm diameter + stop air

Speed variator with remote control

Kw power Flue diameter Door dimensions Distance from back of stove to centre flue (A) Options/Decor

DF : Double-Sided

All measurements are in mm.

0

504

1000

48

1000A

510

Décor 16/9 DF

0

696

504

48

766

510

Door: contemporary design with screen-printed glass. Frameless finish is possible. Convection can be natural or ventilation-forced (through the inside of stove). Warm-air stream above the door. Clean-glass system. Vermiculite inside. Manual adjustment of air intake. Adjustable legs. Ember retainer. Reinforced baffle

Décor 16/9

770 A

0

695

Available in three sizes, as a single-sided model, and as a double-sided model, one-meter wide (16/9 TV screen type).

48

700

Décor 70

700 A

Conventional combustion


22|23

Décor 70

Décor 16/9

Conventional combustion

Décor 16/9 DF

b

Decor with side door

Our constant focus on pure design and fire view will accent

the beauty of your interior.

Our Decor range harmoniously combines aesthetics, clean t e c h n i q u e a n d q u a l i t y.


b

Ultra 427 A

• • • •

• •

600

Ultra 67/60

540

130

580

770 A

0

130

ULTRA Kw power Flue diameter Door dimensions Distance from back of stove to centre flue (A)

50

810A

47

0

All measurements are in mm.

0

700

40

A

130

Ultra 81/70

0

600

Ultra 58/54

One-piece finish frame with 3 sides. Warm-air stream above the door. Clean-glass system Inside can be: vermiculite, cast iron. Stainless-steel air distributor. Double stainless-steel baffle, except for 58/54. Automatic temperature control to prevent excessive wood consumption. Double ash drawer. Flap cap (58/54 excluded) Air control There are two ventilation cases on each side of the ashtray, each case is protected by a filter and comes with a silent centrifuge fan. Speed control for fan output adjustment. New : Pull above the ashtray.

Ultra 77/60

670

40

16

5

Conventional combustion

130

58/54

67/60

77/60

81/70

6<8,5kw

8<10kw

9<11kw

11<13kw

Ø 150

Ø 180

Ø 200

Ø 200

531 x 371

619 x 416

719 x 416

743 x 511

125

140

165

155

Options/Ultra Additional one-piece frame with 4 side

“New Look” door

Warm air nozzle – 125 mm diameter + stop air Speed variator with remote control


Conventional combustion

24|25

Ultra 77/60

b

Ultra 81/70

Ultra

Choose our fully-featured models and enjoy better comfort! Powerful, sturdy and efficient. Continuous fire is possible.


• • • • • • • • • • • •

47

0

600

A

100

100

560

A

57

0

1000

100

57

0

A

600

Maxivision 16/9

1000

0

Maxivison 16/9 DF

45

750

A

750

Glass, 3 screen-printed sides (Vision 16/9 PL model). One-piece finish frame with 3 sides (except for Maxivision 16/9 PL). Warm-air stream above the door. Clean-glass system. Inside vermiculite, (possibility off cast iron for all 16/9). Four adjustable legs with lifting door. Ember retainer. Single baffle (dubble baffle for 56/75). Ashtray. Automatic temperature control with sensor (except for lifting-door models). Double ash drawer. Flap cap. 2 integrated centrifuges fans 2x140m³ (single sided) 4 integrated centrifuge fans 4x140m³ (double sided). Speed control. Air control (except for lifting-door models).

Maxivison 56/75 DF

Maxivision 56/75

560

Conventional combustion

100

MAXIVISION

56/75

56/75DF

16/9

16/9 DF

16/9 PL

Kw power

7<9kw

6<8kw

11<14kw

10<12kw

10<13kw

Flue diameter

Ø 200

Ø 200

Ø 200

Ø 200

Ø 250

496 x 591

496 x 591

946 x 446

946 x 446

911 x 431

180

285

165

285

165

Additional one-piece frame with 4 sides

• (x1)(x2

• (x1)(x2)

“New Look” door

• (x1)(x2

• (x1)(x2)

Warm air nozzle – 125 mm diameter + stop air

Door dimensions Distance from back of stove to centre flue (A) Options/Maxivision

Warm air nozzle – 150 mm diameter + stop air

70 mm finish frame – 4 sides

Speed variator with remote control Maxivision

Maxivision 16/9 PL

DF : Double-Sided

All measurements are in mm.

b

Maxivision


b

Maxivision Maxivision 16/9

Maxivision 16/9 with Lifting Door: This model comes with the same features as Maxivision 16/9, but the door lifts up and there is an automatic flap to partially close the fume exit when the door is closed. Only Jide

combines the thermal features of an integrated-ventilation insert with the pleasure of an open fire thanks to the lifting door

1306

617

975

Maxivision 16/9 PL

1015

112 48

5

946

Conventional combustion

26|27


b

Maxi

• • • • • • • •

600

Maxi 67/60 DF

600

0

100

770

100

770

47

A

57

0

A

0

100

All measurements are in mm.

57

A

600

0

Maxi 77/60 DF

Flat or rounded door. One-piece finish frame with 3 sides. Warm-air stream above the door. Inside can be: vermiculite, cast iron. Ember retainer. Ashtray. Automatic temperature control with sensor. Double ash drawer. Flap cap. 2 integrated centrifuges fans 2x140m³ (single sided) 4 integrated centrifuge fans 4x140m³ (double sided). Speed control. Air control

670

40

600

Maxi 77/60

Maxi 67/60

670 A

Conventional combustion

100

MAXI

67/60

67/60 DF

77/60

77/60 DF

Kw power

7<9kw

7<8kw

8<10kw

8<9kw

Flue diameter Door dimensions Distance from back of stove to centre flue (A)

Ø 180

Ø 200

Ø 200

Ø 200

619 x 446

619 x 446

719 x 446

719 x 446

140

285

165

285

Options/Maxi

DF : Double-Sided

Additional one-piece frame with 4 sides

•(x1)(x2)

• (x1)(x2)

“New Look” door

•(x1)(x2)

• (x1)(x2)

Warm air nozzle – 125 mm diameter + stop air

Rounded door(s) and cap(s)

•(x1)(x2)

• (x1)(x2)

Speed variator with remote control


b

Conventional combustion

28|29

Maxi 77/60

Maxi

Enjoy the view of the fire and the quality.

Maxi 77/60

Available in two «Single side» sizes and two «Double side» sizes.


c Housings 32 33 34 35 36 38

Wall space Central space Free space Maxivision / Nordic Wall-hung Free space DĂŠcor PLUS Cub et Face one

Jide offers a range of inserts that will fit into all architectural settings, they can be dressed up with various housings and can be installed as easily as a stove. They can also be equipped with an integrated ventilation system, ensuring quick and rather even distribution of heat throughout the room.

Discover a new way to play with shapes and thus customise your living space! Jide is proud to present a number of different aesthetic versions combined with contemporary combustion techniques for your comfort. The choice is yours!


c

Wall space

Housing

When our inserts turn into «stoves»...

Housing Inserts

Maxi 67

Maxi 77

Maxi 16/9

Nordic 67

Nordic 77

Nordic 16/9

width

720

820

1050

720

820

1050

height

1070

1070

970

1000

1070

970

depth

445

510

510

505

570

570

All measurements are in mm.

Enjoy all the benefits of an insert with a popular design. Quick installation, no major masonry work required, it’s just like a stove.


c 77 DF

Central space

Housing Inserts Maxi DF

Centre space 67 DF

77 DF

16/9 DF

width

720

820

1050

height

1070

1070

970

depth

575

575

575

Intemporal design

Housing

32|33


Free space single sided

Housing

Housing

Housing

Free space double sided

Inserts

Maxi 67

Maxi 77

Maxi 16/9

Nordic 67

Nordic 77

Nordic 16/9

Inserts Maxi DF

67DF

77DF

16/9 DF

width

720

820

1050

720

820

1050

width

720

820

1050

height

650

650

650

650

650

650

height

650

650

650

depth

445

510

510

505

570

570

depth

575

575

575

All measurements are in mm.

c

Free space Maxivision / Nordic


c

34|35

Housing

77

Wall-hung

Wall-hung

Housing Inserts Maxi

67

77

16/9

width

720

820

1050

height

650

650

650

depth

445

510

510

Housing

Nordic Wall-hung

Inserts Nordic

67

77

16/9

width

720

820

1050

height

650

650

650

depth

505

570

570


c

Housing

Décor 77 PLUS

Free space Décor PLUS

Inserts

67

77

16/9

77DF

16/9DF

width

720

820

1050

820

1050

height

750

750

750

750

750

depth

530

530

530

575

575

Décor 16/9 DF PLUS

With ventilation 2x235m² include

All measurements are in mm.

Décor PLUS

Housing


c

Décor 77 PLUS

Décor 16/9 DF PLUS

Free space Décor PLUS

Housing

36|37


c

Cub et Face one

Housing

Inserts are compliant with din+ label requirements. 525

525 A

52

A

5

60

52

5

With insert Nordic

42/54

Kw power

5<6kw

Flue diameter

Ă&#x2DC; 150

*with wood store

All measurements are in mm.

550

3

379 x 441

Distance from back of stove to centre flue (A) 533

420 1650

Nordic Face one

550

50

Nordic Cub - 1

3

Nordic Face one

50

533

1258

Nordic Cub - 2

413

550

533

413

1258

Nordic Cub - 1

Door dimensions 520

Low wood consumption and maximum heat efficiency !

100


Tailored

d

38|39

Tailored

If you have little space... If your existing fire place has specific dimensions... If you think it will be difficult to install a double-sided insert because your partition wall has specific dimensions... If you have a specific desire for your new installation... And if no mainstream model can fit in the requirements of your project... Jide has the solution: we are able to adapt the length, height and width of our inserts to your needs while ensuring efficient operation and compliance to safety standards. The feasibility of your project will be analysed by one of our technicians. Depending on the results of the analysis, a price and timeframe estimate can be prepared.

0 10 20 30 40 50 60 70 80 60

90 50 40

30 20

10

00

10

20

30

40

50

60

70

80

90

100

110

130 120


e

Aqua Air Flow Circuit of combustion

Open circuit / AIR

Aqua Air Flow

Close circuit / WATER

INNOVATION by JIDE Discover our “boiler ” log stove: high performance, fl e x i bi l i ty, aesthetics, new patented operating c hara c teristics.

Central eating system without HTW

Storage cilinder wtih HTW

Central eating system with HTW

Components required for solar panel installation

Solar panel

Accumulation tank

Components required for floor installation

Gaz/oil boiler wtih HTW Gaz/oil boiler or pellet heat pump

Discharge circuit Restraint valve

Back-flow circuit Circulator

Cold tap water Différential safty valve

Hot tap water

Valve tree ways


e

Aqua Air Flow is a revolutionary “Hydro” stove with an output of 8-16 kw, capable of transmitting 50% of the heat energy that it produces to the water circuit of the central heating system, thus offering the possibility of substantial savings on oil or gas while maintaining the performance and the aesthetics which have given the Jidé inserts the reputation that they have. The major difference compared to existing hydro stoves is that the water is not in direct contact with the stove’s combustion chamber. The water is heated by a forced air stream which circulates in a closed circuit around the heating element and the smoke exhaust conduit. An air/water exchanger located in the lower chamber of the stove transfers the heat from the air to the water. Jidé recommends several installation methods in order to produce hot water for you that can be used for sanitary purposes; allowing you to benefit from the comfort of your own generated water accumulation or to connect to your existing central heating system. With the built-in version of Aqua Air Flow, there is an installation kit available which comprises a cover frame and a housing that is to be fixed to the back of the device thus allowing for inlet air to the fan.

What advantages are there with this innovative new design? Safety is assured in all circumstances, as all risks of water overheating are prevented. As soon as the water reaches 80 degrees, the air circulation is interrupted. A thermostat switches off the fan. Thus an electrical power failure or a shutdown of the water pump will not pose any safety problems. The optimised combustion of the insert is not influenced by the water circuit. The increase of the high temperature of the heater allowing for gas afterburning is fast, and emissions of carbon monoxide and particles are controlled and they respect the applicable standards. By avoiding thermal shock, condensation is prevented, as is fouling of the stove and the smoke conduit (chimney), which in turn gives the stove much more longevity. The Aqua Air Flow is the only hydro stove which is used like a classic air stove. The production of hot water can be interrupted. This 100% air method can be advantageously used in the off-season; or, in the event that the power supply is interrupted, natural convection allows for the heating of the room in which the appliance is located. No specific kind of maintenance is required. In “hydro” mode, convection air circulates in a closed circuit without collecting dust which could have an impact on the fan and the exchanger. The afterburning at the heating element prevents the binding of soot and inhibits dirt from collecting on the glass.

Aqua Air Flow 77

Why is it innovative?

V1

Aqua Air Flow

Aqua Air Flow

40|41


e

Aqua Air Flow

Aqua Air Flow 67

Aqua Air Flow

Charactéristics/Aqua Air Flow

AAF 67

AAF 77

Power

8<10kw

12<16kw

Power given up to the heating water

4<5kw

5<7kw

Power given up by radiation

4<5kw

7<9kw

77%

77%

12Pa/15Pa

12Pa/15Pa

3,5kg/h

5kg/h

Nominal efficiency Smoke evacuation minimum/maximum of de fireplace Maximum consumption of dry wood per hour

Dimensions/Aqua Air Flow

AAF 67

AAF 77 V1

AAF 77 V2

Diameter smoke evacuation

Ø 150

Ø 180

Ø 180

Diameter external air inlet

Ø 100

Ø 100

Ø 100

Dimensions width x Heigth

730 x 1250

830 x 1375

830 x 1250

490

600

490

Depth


Basic

b

• • • •

39

0

560

A

COLOR : Traditional anthracite (darker) grey, brown chocolate or contemporary (lighter) grey for all ranges except Decor: black/anthracite grey.

Give a more contemporary look to your insert, with less steel and with a screenprinted glass.

0

63/56

77/60

Kw power

6<8kw

7<9kw

Flue diameter

Ø 150

Ø 200

584 x 400

719 x 446

160

165

Additional one-piece frame with 4 sides

2x90 m3/hour ventilation

Options/Basic

2x140 m3/hour ventilation

This ensures minimum fuel consumption through automatic primary air intake, providing a constant temperature in the room. Adjusting the insert is very easy.

NEW DOOR :

47

BASIC

Distance from back of stove to centre flue (A)

TEMPERATURE CONTROL WITH SENSOR :

N.B.: Factory-installed for the «Ultra» range.

770 A

Door dimensions

42|43

600

Basic 63/56

Finish frame with 3 sides. Warm-air stream above the door. Ember retainer. Single baffle. Manual temperature control. Single ash drawer. Two tangential fans (optional). Speed control (optional).

630

Basic 77/60

Accessories

JIDE offers several ranges and models with different options, to be selected according to your needs.

Simplicity, efficiency and a very good price/quality ratio! •

f

Conventional combustion

ROUNDED DOORS AND CAP :

SPEED VARIATOR WITH REMOTE CONTROL :

A pleasure for the eye.

4 preprogrammed speeds.

Only for Maxi 67-77 and Maxi DF 67-77.

A temporization of 30 seconds for the recharging of the stove.

FIBREGLASS CORD : Whatever the general opinion is, the door seam fibreglass cord ensures better sealing and prevents parasite air to get in.

BAFFLE, STAINLESS STEEL & COKE OR VERMICULITE:

AIR CONTROL : Starts and ends the ventilation when a certain temperature is reached in the insert. This can be used to prevent the ventilation from working all night long.

The upward draft in your chimney is a major factor in determining the thermal efficiency of your insert. This is why you can set the single or double baffle in different positions and thus close the fume exits more or less, whether you need to lower the upward draft or prevent fire exhaustion and fume pullback.

CENTERING DEVICE : Handle with centering device for the positioning of the door.


g

Better understanding means better purchasing

www.jide.be

Buying a wood fireplace insert is an important decision. If you want to get the most out of your fireplace insert, you should select the right one, so there are a few things you should know...

Choose JIDE for sturdiness and durability. JIDE fireplace insert is a stove to be inserted into an existing or future fireplace. It is made of top quality steel, which allows for fast heat production. The dual convection wall allows for the heated air to be vented out in the room using two fans. JIDE fireplace insert also heats your room by radiating through its front side. The inside can be made of vermiculite for better radiation or cast iron for longer heat conservation; this is a matter of personal preference only. The door comes with a smoke-removing system for a nicer view of the fire. The devices can be combined together through a tube network for warm air to be fed in other rooms. The external housings (convection chambers) of our inserts are made of electro-zinc steel (anti-rust treatment). Then they are coated with high-temperature paint. The heating units are cord-welded, not tack-welded, and we use top quality steel. All our models are made with materials of the same quality.

Maximum heat efficiency and minimum energy consumption. In the interest of continuous improvement, JIDE strives to increase the thermal efficiency of inserts; this means that you will burn less wood and burn it better, hence a more economical and environmental consumption. Thermal efficiency is determined by the percentage of energy drawn from combustion and used to heat up your house.


g

Better understanding means better purchasing

44|45

As for the power (kilowatts), it is a key element in selecting the insert that will best correspond to the space you want to heat. The power is determined by the quality and quantity of wood necessary for the insert to heat that space. The quality of insulation in your house will also be a factor in the final selection. Therefore, the insert should be neither too big nor too small. You should seek professional advice when selecting the right insertt. Here is what you should calculate for your insert: • Your house has very good insulation: power should be 15 watts per m³. • Your house has good insulation: power should be 35 watts per m³. • Your house has average insulation: power should be 50 watts per m³. • Your house has bad insulation: power should be 80 watts per m³. 1 Kilowatt = 1000 watts Wood combustion depends on the air intakes (oxygen). The primary air gets in through the combustion grate, under the ashes. • It helps to light (ignite) the fire. • It maintains combustion. The secondary, pre-heated air, in the flames: • Is the part of post-combustion process as it burns the gases contained in the fumes, which greatly increases the temperature in the insert (higher economic efficiency). • It provides almost perfect and clean combustion (higher environmental efficiency). The tertiary, pre-heated air, above the glass (Nordic range): • Has a turbo effect. • Sweeps the glass from top to bottom, thus preventing the glass and fumes to be in contact (the glass remains clean). • It also maintains combustion (higher thermal efficiency).


g

Better understanding means better purchasing

Storing firewood If you’d like to store firewood to let it dry, here are a few tips: Try to speed up the drying process by splitting the wood as soon as practicable after cutting down the trees, preferably in winter. Freshly cut wood is easier to split and burns more efficiently than wood that’s been left to dry for too long.

Wood quality

Adapt the length of logs directly to the size of your stove, they will dry a lot faster.

Certain wood materials, such as agglomerated wood, plywood, laminated wood, railway sleepers, generate toxic emissions when burning, so it is highly recommended not to use them.

Select a sunny and well ventilated area to store the wood. Ensure continuous air circulation by storing the wood on pallets or in wire cases, or by placing the logs in alternate positions. Do not store the wood in a closed place and do not cover it, especially with plastic, otherwise it will rot. When the wood has dried up, protect it against weather conditions.

There are different types of wood and they do not have the same calorific power. Therefore, as a rule of thumb, you might want to opt for hard wood types (Oak, Beech, Ash, Hornbeam) which radiate a lot of heat and produce a lot of ambers. (1kg dry wood gives ± 4 kilowatts energy)

If the logs are placed along a wall, leave some space between the wood and the wall.

Yet, you should not forget about softer wood types either (Birch, Lime, Chestnut), those burn out faster, but they are great for starting or re-starting a fire.

Do not forget that wood degrades with time and thus loses its energy (calorific value).

As for evergreens, such as fir and pine, those do burn, but they contain resin that really soots up chimneys, so they should be avoided.

Likewise, if you burn damp wood, your stove will be less efficient and your chimney will soot up sooner.

Energetic yield

Energetic yield is counter proportional to wood humidity r a t e.

25

50

70

Humidity rate (%)


g h

Bettercomprendre Bien understanding pour mieux means better choisir purchasing

50|51 46|47

Some information and recommendations Ask a specialist to install your insert/stove to make sure it will operate efficiently and safely. Visit us at www.jide.be to get a list of our regional authorised installers. Before using your insert/fireplace for the first time, and to ensure efficient operation and long life, we highly recommend that you carefully read the directions for use provided with the product to learn about its various functions and characteristics. When reading these directions for use, please strictly follow the specific instructions for igniting the insert/stove to avoid certain problems. The directions for use also explain how the wood load and certain weather conditions may impact on the efficiency of your insert/stove. Ask a specialist to handle the maintenance and care of your insert/stove to enjoy it for a long time.

JIDÉ: What makes us happy? A satisfied customer!

Garantie Jidé :

• 7 years for the heating unit (structure) in normal use conditions in compliance with the instructions.

• 2 years for the electric parts. The internal wear parts that are in contact with flames and ambers are not covered by this warranty (the glass is covered until the first fire).


www.jide.be

Rue des Meuneries, 11 B-4650 Herve • Tél. | 0032 (0)87 31 75 12 • Fax | 0032 (0)87 31 75 11 • info@jide.be Paper from responsible sources

Responsible publisher in 2013: Vincent Hick; layout and DTP: Becker & Zaccagnini (www.be-za.com). All texts, illustrations and pictures contained in this brochure are based on the state of our products at the time of printing. Jidé S.A. reserves the right to modify its products in the interest of technical development. We thank you for your understanding.

Your authorised distributor is:

MADE IN BELGIUM

Jide 2014  

Jide Inset stoves