Page 1

mi li tary

polic e

r escue

fire fi gh ters

ar borist

speleology

c anyoni ng

rope pa rks

r ope acc ess

fal l arrest

work posi ti on ing

work restRai nt

2013 en

PROFESSIONAL EQUIPMENT


INDUSTRIAL technology

For over 220 years EDELWEISS has accompanied the mountaineering pioneers and continues today to be present alongside athletes and professionals in height. With this experience, punctuated by constant innovation and quality research, we can be a key player in your safety. Our goal remains to connect you to the life. EDELWEISS “Stay connected”.

The semi-static Ropes Storage and lifetime

These are sometimes wrongly called static. They allow access to, and positioning at the worksite. They have moderate stretch, which allows them to absorb sufficient energy to arrest falls of factor 0.3.

The working life depends on the frequency and the type of use. Abrasion, UV exposure and humidity gradually degrade the properties of the rope. Note that with use, a rope thickens and thus loses up to 10 % length.

The types of Ropes

Storage time: In good storage conditions a rope may be kept for 5 years before first use without affecting its future lifetime duration in use.

There are two types of ropes. • Type A: Rope for use in rescue, or as a working or security line for work at height. In the latter case it is used for access to the place of work in combination with other items of equipment, or to undertake work under tension or in suspension on the rope. • Type B: Rope of lesser diameter and strength than Type A, demanding greater precautions and attention to security during use.

The core: the heart of the rope, providing the majority of its strength.

Thin band running through the rope indicating its type, diameter, the standard it conforms to and year of manufacture.

The dynamic Ropes In certain work at height, or rescue, situations, you may need to use dynamic ropes, for example for setting up anchorages. In effect, if you are exposed to positions where the rope could take a fall factor greater than 0.3 it is imperative to use a dynamic rope (EN892), the only type capable of absorbing a resultant fall. (NB the techniques of belaying with dynamic ropes are different to those for semi-static ropes, and necessitate professional training). The often very hard wear conditions imposed on ropes during work or on rescues means that the toughest choice should be made.

NB: A security rope is always of core and sheath construction.

Coloured filament integrated into the rope indicating the year of manufacture.

FALL FACTOR Total height of fall Lenght of rope used 1

5 m of fall 2,5 m of rope used

5m

1

= Fall factor

2,5

= Factor 2 DANGER

5m

2

2,5

m

m

2,5 m

The sheath: serves to protect the rope from abrasion.

Lifetime in use: A rope could be destroyed during its first use. It is the inspections which determine if the product must be scrapped more quickly. Proper storage between uses is essential. The lifetime of the rope in use must never exceed 10 years. The total maximum lifetime (storage before use + lifetime in use) is thus limited to 15 years.

Fall factor must always be under 2. 2

5 m of fall 5 m of rope used

= Factor 1 OK 5,0 m 2,5 m

2

=

Factor 2

5,0 m

DANGER

5,0 m

=

Factor 1 OK


WORK AT HEIGHT

Tested and approved Fall factor F: The fall factor is the ratio of the length of the fall taken to the length of rope which arrests it. Impact force IF: This is the force which is transmitted to person, connector and anchor point during the arrest of a fall. The impact force given in the performance tables is that obtained by a fall factor 0,3 with a 100 Kg mass for type A ropes, and an 80 Kg mass for type B ropes. This is required to be less than 6 kN. Number of falls: The number of falls sustained is determined on a rig which reproduces factor I falls.The terminations on the test length are made with figure of 8 knots. The drop falls are made at intervals of three minutes. Five falls must be sustained, using a 100 Kg mass for type A, 80 Kg for type B.

Knotability K: A single overhand knot is tensioned with a 10 Kg weight for one minute, then the internal diameter of the knot is measured with the tension reduced to 1 Kg. The internal diameter divided by the rope diameter: K < 1,2. Sheath slippage S: 2 m of rope is placed in the pulling rig and drawn through it 5 times. Sheath slippage must not exceed 15 mm for type B ropes, and (20 + 10 (D - 9)) mm where D is the rope diameter, for type A ropes. Shrinkage R: The percentage shrinkage of the rope after soaking in water for 24 hours. Mass of the sheath: The minimum sheath percentage which must compose the rope is calculated by S = ((4D - 4) / D²) x 100 where D is the rope diameter. Static strength: The force required to break the rope when it is pulled slowly. type A ropes must exceed 22 kN, type B ropes 18 kN.

Elongation E: This is the elongation of the rope which occurs between loads of 50 Kg and 150 Kg. It must not exceed 5 %.

knotted terminations knotted terminations

Static strength with knotted terminations: A sample of the rope terminated with a figure of 8 must withstand for 3 minutes a force of 15kN (type A) 12kN (type B).

Fall factor

Impact force

Elongation

Knotability

Static strength with knotted terminations

European Standards EDELWEISS production follows a very high technical standard to ensure safety. Our ISO 9001 manufacturing process guarantees consistent quality. Our Personal Protective Equipment meets and even exceeds the relevant EN standards.

Rope identification:

The rope has a band fastened at its end indicating its type: Type A or B, its diameter, the name of the manufacturer, and the number of the Euro Norm to which it conforms.

Meaning of markings: CE : Conformity to the European directive 0120 : Number of the Notified Body EN1891 : Technical reference.

Conformity to standards

3

Type


CONCEPTS

temp concept The resistance of Aramid to high temperatures is best illustrated by the graph illustrating the residual strength after exposure to raised temperatures. Thus we may for example see that after 10 hours of exposure at 200C it retains 100% of its strength, or that after 1 hour at 350C it retains 90% of its strength.

Residual strength (%)

EFFECT OF HIGH TEMPERATURES ON ARAMID

Exposure time (Hours)

Polyamid sheath

unicore concept

Aramid

Relationship between time of exposure at high temperature and residual strength of Aramid

Polyamid core

An astonishing process, bonding rope sheath and core without affecting the rope’s suppleness. Even in the hardest conditions of use sheath slippage is suppressed. If the sheath is cut or torn, core and sheath remain bonded together. With a standard rope, if the sheath is cut by abrasion over an edge, a frequent occurrence in work at height and in rescues, it slides and gathers over some metres. It then becomes impossible to pass this zone, either to ascend or to descend. If the problem occurs near to the end of the rope the sheath may slide off completely, and the user fall to the ground. With the UNICORE process the sheath remains in place and the user may escape, either by descent or ascent, taking all necessary precautions. He/she is not stuck without a solution on the rope.

stitched termination eye

Termination Proline

Termination Quercus

Termination Sequoia

Concepts Perform 3

EDELWEISS, at the height of its 220 years of experience in designing products dedicated to verticality, presents its latest innovation: PERFORM 3. This new development applied to a wide range of dynamic ropesprovides the following benefits: 1. improved flexibility = increased comfort. 2. improved energy absorption = increased safety. 3. weight reduction = increased performance.

Supereverdry

EDELWEISS was the first climbing rope maker to apply a Supereverdry treatment to its fibres. The benefits of a Supereverdry treatment are self-evident: the ropes are lighter in case of humidity, dry quicker and don´t tend to stiffen due to freezing. The Supereverdry treatment is applied to all fibres in the core and the sheath. Comparative

tests demonstrate the superiority of this treatment over competing methods of other manufacturers with respect to durability as well as efficiency. Everdry EDELWEISS was the first climbing rope maker to apply a Everdry treatment to its sheath. The benefits of a Everdry treatment makes the ropes lighter in case of humidity, dry quicker and don´t tend to stiffen due to freezing. The Everdry treatment is applied only to the fibres of the sheath.

HD Cover

HD Cover is a technology through which, each cover thread is individually controlled, as opposed to standard braiding where the threads are controlled by pairs. With this High Definition braiding and although

4

the thickness of the sheath remains the same, the rope surface is much smoother than with a standard braiding, the rope doesn’t generate extra braking in belay systems and actions become more comfortable; another positive consequence, the wear due to abrasion is also reduced and the rope lifetime accordingly extended.

Canyon

EDELWEISS CANYON ropes conception is really different from the competition.The rope cover sheath uses a combination of the performance of Polyamide and Polyester. The benefits are better abrasion resistance and a shrinkage in water divided by 3. EDELWEISS CANYON ropes remain flexible and manageable throughout their lifetime.


Static ropes

performances

Bud 10.5 mm

Versatile low stretch rope with an optimal balance price/quality. Mostly used in moderate work situations. Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTB105

Diameter

10,5 mm

Breaking strength

24 kN

Nb of falls factor 1

12

Impact force factor 0,3

5,6 kN

Static elongation

3,1 %

Sheath percentage

36,4 % 67 g/m

Weight White

performances

Proline 10 mm

Ropes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditions. Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTP10

White

Diameter

10 mm

Breaking strength

23 kN

Nb of falls factor 1

6

Impact force factor 0,3

5 kN

Static elongation

2,2 %

Sheath percentage

41,2 %

performances

PROLINE 10.5 mm everdry

Ropes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditions Stitched eye can be ordered Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTP105

White

Black

Red

Diameter

Red

Breaking strength

26 kN

Nb of falls factor 1

15

Impact force factor 0,3

4,6 kN

Static elongation

4,8 %

Sheath percentage

44 %

Weight

65 g/m

performances

Ropes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditions Lengths: 50m, 100m, 200m Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTP11

Black

10,5 mm

Khaki

Proline 11 mm

White

64 g/m

Weight

Black

Khaki

5

Diameter

11 mm

Breaking strength

30 kN

Nb of falls factor 1

> 20

Impact force factor 0,3

4,35 kN

Static elongation

4 %

Sheath percentage

43,7 %

Weight

75 g/m


PROMAX Unicore

promax 10.5 mm

performances

Ropes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditions Stitched eye can be ordered Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTP105U

10,5 mm

Diameter Breaking strength

26 kN

Nb of falls factor 1

15

Impact force factor 0,3

4,6 kN

Static elongation

4,8 %

Sheath percentage

44 %

Weight

65 g/m

White

promax 11 mm

performances

Ropes from the PROMAX line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditions Stitched eye can be ordered Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTP11U

Diameter

11 mm

Breaking strength

30 kN

Nb of falls factor 1

> 20

Impact force factor 0,3 Static elongation Sheath percentage

4 % 43,7 % 75 g/m

Weight

White

4,35 kN

performances

promax 11.5 mm

The PROMAX rope offers a high breaking strength and its UNICORE treatment increases safety features in eliminating sheath slippage, even if the sheath is cut. Evacuation is then still possible. Lengths: 50m, 100m, 200m Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTP115U

Diameter

White

6

11,5 mm

Breaking strength

40 kN

Nb of falls factor 1

> 20

Impact force factor 0,3

5,1 kN

Static elongation

3,7 %

Sheath percentage

32 %

Weight

88 g/m


Special Ropes

performances

Duotech 10.5 mm

A perfect rope for any circumstances which has been certified to both standards EN892 and EN1891, both the semi-static and the dynamic rope standards. Lengths: 50m, 100m, 200m Material Sheath / Core: Polyamid/Polyamid - Vectran Norm: CE EN 1891/892 - UIAA Type: A (EN 1891) q (EN 892) Code: CSD105

Diameter

10,5 mm

Breaking strength

25 kN

Nb of falls factor 1

24

Impact force factor 0,3

4,3 kN

Static elongation (50/150kg)

Green

2 %

Sheath percentage

43 %

Weight

75 g/m

Duotech the rope with two faces

The duotech is thus a classic semi static rope well adapted to various types of work on ropes, to rescue, and to tactical applications. In event of a very violent fall an internal vectran ‘fuse’ will rupture, and the rope then becomes dynamic, with all the security that characterizes dynamic ropes. The fuse will rupture under a force of around 3 kN. In addition, duotech resists a fall factor 1 drop holding 100 kg over a sharp metal edge of 0.75 mm radius. Ideal for delicate operations at height, pylon climbing, clock towers, rescue and fast technical intervention.

performances

temp 11 mm

The Temp rope is concived for hostile environment, such as high temperature or chemical hasard situation. Its aramide core wistands short periods at 300°C temperature; if the polyamide melts, the aramide core still holds 800 daN. At 500° C, the rope is completely destroyed. Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid/Aramid Norm: CE EN 1891 - UIAA Type: A Code: CSTPA White

Yellow

Diameter

11 mm

Breaking strength

25 kN

Nb of falls factor 1

15

Impact force factor 0,3

5,6 kN

Static elongation

3,1 %

Sheath percentage

42 %

Weight

79 g/m

Red

performances

Offshore 11 mm

Offshore 11 mm speaks for itself. Developed in cooperation with workers from the oil industry / off shore, this rope gives you great handling and maximum durability. Lengths: 50m, 100m, 200m. Other lengths can be supplied on order Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTOF11

Diameter

11 mm

Breaking strength

30 kN

Nb of falls factor 1

> 20

Impact force factor 0,3 Static elongation (50/150kg)

White

7

5,1 kN 4 %

Sheath percentage

44 %

Weight

75 g/m


Dynamic Ropes

performances

Axis II 10.2 mm

Ideal rope to begin climbing outdoors with a perfect balance between diameter and handling characteristics. Lengths: 50m, 60m, 70m, 200m Other lengths can be supplied on order Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: C3R102

Diameter

10,2 mm

Impact force factor 1,77

8,3 kN

Nb of falls factor 1,77

11

Elongation at the first fall

36 %

Static elongation

9,3 %

Sheath slippage Green

performances

Designed for the Military, Instructors, Outdoor schools and activities where extra durability and strength is required. It also appeals to other users who demand these attributes. Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid Norm: Polyamid Type: CE EN 892 - UIAA Code:

Diameter

11 mm

Impact force factor 1,77

14

Elongation at the first fall

32 %

Static elongation

7,6 % 0 mm 80 g/m

Weight

Red

9 kN

Nb of falls factor 1,77

Sheath slippage

performances

Extrem 9 mm

Top durability double rope for intensive usage. Ideal for instructors using the double rope protection system. Lengths: 50m, 60m, 200m Other lengths can be supplied on order. Material: Polyamid Norm: CE EN 892 - UIAA Type: Code: CA09

Yellow

66 g/m

Weight

Extrem 11 mm

Violet

0 mm

Diameter Impact force factor 1,77

Violet

6,25 kN

Nb of falls factor 1,77

12

Elongation at the first fall

33 %

Static elongation

9 %

Sheath slippage

0 mm

Weight

8

9 mm

54 g/m


arborists

adline PRUSIK 10 mm

performances

ADLINE 10 mm is our special prussik rope for our tree surgeon ropes. The double braid polyester construction gives an excellent abrasion resistance. Material: polyester Code: CSTA10.xx

Diameter

10 mm

Breaking strength

17 kN

Weight

73 g/m

White

Quercus 13 mm

performances

The QUERCUS rope is a very good compromise between supleness and resistance for any tree surgeon work. Material: Polyamid Norm: CE EN 1891 Type: A Code: CSTP13

Red

Diameter

13 mm

Breaking strength

34 kN

Nb of falls factor 1

> 20

Impact force factor 0,3

5,3 kN

Static elongation

4,2 %

Sheath percentage

61 %

Weight

99 g/m

performances

sequoia 13.5 mm T

he SEQUOIA tree surgeon rope is made of a typical american type tree surgeon rope sheath giving an outstanding longevity to the rope. Material: Polyester/Polyamid Norm: CE EN 1891 Type: A Code: CSTP135

Diameter

13,5 mm

Breaking strength

30 kN

Nb of falls factor 1

> 20

Impact force factor 0,3 Static elongation

5 %

Sheath percentage

82 % 119 g/m

Weight

Yellow

5,1 kN

performances

Prusik 12 mm volcano

Short lengths of rope with sewn terminations for constructing self-locking (prusik) loops. These ropes have a 50 % aramid construction intermixed with polyester filaments. Prusiks made from classic ropes have a very short life, because they glaze in use due to the effect of friction. The presence of 50% of highly thermally resistant aramid fibres in Volcano protect it against melting and thus greatly increases its lifetime. Available in 10 and 12 mm, according to the knot to be used.

Diameter Breaking strength

Material CORE / SHEATH: Polyamid Polyester / Aramid Norm: CE EN 354

Red

9

10/12 mm 22 kN


STANDARD NORMS

PPE EN Equipment Standards

All products manufactured for sale in the EU as Personal Protective Equipment must comply to one or more relevent product standards. These are all EN pr prEN specifications, and a compliant product should be marked with the EN number, the CE code logotype and the details of the approvals agency. Below is a list of all equipment specifications relating to height safety PPE.

Work equipment standards: PPE against falls from a height

industrial height safety equipment generally has a standard in this section, and more are being added over time. If an industrial standard exists, then products used AT WORK must comply to it. Standard Relates to: EN341 Descender devices EN353-1 Guided type fall arresters type 1 : rigid anchorage line (rail systems such as the Railok) EN353-2 Guided type fall arresters type 2 : flexible anchorage line (wire and ropebased systems such as Latchways, Rockers, ASAP) EN354 Lanyards EN355 Shock absorbers (both discrete devices and components of other systems) EN358 Work positioning systems (polestraps, etc) EN360 Retractable fall arresters (blocks and reels) EN361 Full body fall arrest harnesses

Standard Relates to: EN362 Connectors (carabiners, scaffold hooks, etc) EN363 Fall arrest systems (tested as a complete system) EN364 Test methods - the standard for how to test products for compliance, used by manufacturers. EN365 General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging - the standard defining what labels and instructions must be used on a product, and what the user is responsible for in terms of maintenance and examination. EN813 Sit harnesses (industrial abseil harnesses) EN1891 Low stretch kernmantel rope (semi-static rope)

Mountaineering and climbing equipment standards

many products do not yet have an industrial standard, but there is a ‘sport mountaineering’ version. These mostly come from UIAA specifications, and are no less stringent. If a product does NOT have an industrial standard, then a mountaineering compliance makes it suitable for use at work. If a product has both, the industrial standard must be used. The best example of this is connectors - a snap-lock carabiner will comply to EN12275 but fail EN362 (which needs a locking mechanism), and so it cannot be used at work. Standard EN564 EN565 EN566 EN567 EN568 EN569 EN892 EN893 EN958

Relates to: Accessory cord, safety requirements and test methods Tape, safety requirements and test methods Slings, safety requirements and test methods Rope clamps, safety requirements and test methods Ice anchors, safety requirements and test methods Pitons, safety requirements and test methods Dynamic mountaineering rope, safety requirements and test methods Crampons, safety requirements and test methods Energy absorbing systems for via ferrata (klettersteig) climbing, safety requirements and test methods

Standard EN959 EN12270 EN12275 EN12276 EN12277 EN12278 EN12492 EN13089

Relates to: Rock anchors, safety requirements and test methods Chocks, safety requirements and test methods Connectors, safety requirements and test methods Frictional anchors, safety requirements and test methods Harnesses, safety requirements and test methods Pulleys, safety requirements and test methods Climber’s safety helmets, safety requirements and test methods Ice tools, safety requirements and test methods

General standards relating to PPE and ropes

standards for equipment that may be used outside height safety, such as fibre ropes and site helmets. Standard EN397 EN696 EN701 EN795 EN45014

Relates to: Industrial safety helmets (site hats) Polyamide fibre ropes (laid and braided - not kernmantel) General service fibre ropes (natural fibre and other polymers not covered by EN696) Anchor devices - requirements and testing (industrial and climbing anchors for any purpose) General criteria for Certificates of Conformity (instructions for manufacturers)

Rescue lifting and climbing standards

Specialist standards for rescue equipment. These can only be used for rescuing a casualty in an emergency situation, and are not acceptable for normal ‘work’ use unless they also comply to the relevent industrial standards, so a harness that complies to EN1497 but not to EN361 cannot be used for industrial fall arrest. Standard EN1496 EN1497 EN1498

Relates to: Rescue lifting devices (hauling and winching devices) Rescue harnesses (rescue nappies and emergency escape harnesses) Rescue loops (casualty lifting strops)

10


RESCUE

performances

Rescue 12 mm

The RESCUE 12 mm rope is developped for rescue interventions. It remains easy to knot even with a large diameter. Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTN12

Diameter

12 mm

Breaking strength

35 kN

Nb of falls factor 1

> 20

Impact force factor 0,3

5 kN

Static elongation

4,3 %

Sheath percentage

36,8 % 88 g/m

Weight Black

performances

Rescue 13 mm

Low stretch rope for search and rescue activity. Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CST13

White

Orange

Black

Diameter

13 mm

Breaking strength

44 kN

Nb of falls factor 1

> 20

Impact force factor 0,3

5,4 kN

Static elongation

2,9 %

Sheath percentage

37 % 107 g/m

Weight

performances

Elite rescue 10.6 mm

Type A low-stretch rope made of a polyester-polyamid composite sheath, with Everdry treatment. The rope has a high resistance to abrasion whilst remaining supple in use. Compared to a standard polyamid sheath, the shrinkage is reduced by a factor of 3. Material sheath / core: Polyamid-Polyester/Polyamid Lengths: 50m, 100m, 200m Other lengths can be supplied on order Norm: CE EN 1891 - UIAA Type: A Code: CSTER106

Diameter

10,6 mm

Breaking strength

25 kN

Nb of falls factor 1

15

Impact force factor 0,3

5,2 kN

Static elongation (50/150kg)

4 %

Sheath percentage

37 %

Weight

71 g/m

Yellow

performances

Canyon 10 mm

Type A low-stretch rope made of a polyester-polyamid composite sheath, with Everdry treatment. The rope has a high resistance to abrasion whilst remaining supple in use. Due to its low shrinkage this rope is extremely suitable for use with waterrescue. Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material sheath / core: Polyamid-Polyester/Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTC10

Yellow

11

Diameter

10 mm

Breaking strength

23 kN

Nb of falls factor 1

6

Impact force factor 0,3

5 kN

Static elongation (50/150kg)

4,5 %

Sheath percentage

35 %

Weight

68 g/m


Intervention - Military - Police

performances

proline 10 mm

Versatile low stretch rope with an optimal balance price/ quality. Mostly used in moderate work situations. Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid Norm: EN 1891 - UIAA Type: A Code: CSTPN10

Black

Breaking strength

23 kN

Nb of falls factor 1

6

Impact force factor 0,3

5 kN

Static elongation

2,2 %

Sheath percentage

41,2 % 64 g/m

performances

Ropes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditions Stitched eye can be ordered Lengths: 50m, 100m, 200m Other lengts can be supplied on order Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTPN105

Diameter

10,5 mm

Breaking strength

26 kN

Nb of falls factor 1

15

Impact force factor 0,3

4,6 kN

Static elongation

4,8 %

Sheath percentage

44 %

Weight

65 g/m

Khaki

performances

proline 11 mm

Ropes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditions Lengths: 50m, 100m, 200m Material: Polyamid Norm: CE EN 1891 - UIAA Type: A Code: CSTPN11 Black

10 mm

Weight

Khaki

Proline 10,5 mm

Black

Diameter

Diameter

11 mm

Breaking strength

30 kN

Nb of falls factor 1

> 20

Impact force factor 0,3 Static elongation Sheath percentage

Khaki

4,35 kN 4 % 43,7 % 75 g/m

Weight

performances

special action 11 mm

Type B semi-static ropes specially developed for rapid descent from helicopters by special forces. Their Aramid sheath does not melt, even against a descender overheated by the descent. Whereas classic ropes in polyamide or polyester have a very limited lifetime because their sheath melts, rendering the rope stiff and useless, Raider ropes permit multiple descents. Lengths: 50m, 100m, 200m Material sheath / core: Aramid / Polyamid Norm: CE EN 1891 - UIAA Type: B Code: CSTSPAK11

Black

12

Diameter

11 mm

Breaking strength

26 kN

Nb of falls factor 1

8

Impact force factor 0,3

4,7 kN

Static elongation (50/150kg)

3,3 %

Sheath percentage

41 %

Weight

81 g/m


Intervention - Military - Police

action 11 mm

The thickness of the Aramid sheath on the Action has been reduced, and the quantity of core increased, in order to be able to certify it as type A. Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material sheath / core: Aramid / Polyamid Norm: CE EN 1891 Type: A Code: CSTAK11

performances TEST WITH BLOWTORCH Semi-static rope holding a mass of 100kg exposed to a temperature of 400° C (+ or- 50° C) for 15 minutes : Results: • Classic 11 mm rope : Break after around 40 sec. • Special Action 11 mm rope : Residual strength around 1500 daN after 15 minutes. • Action 11 mm rope : residual strength around 1000 daN after 15 minutes.

Diameter

11 mm

Breaking strength

24 kN

Nb of falls factor 1

6

Impact force factor 0,3

5,9 kN

Static elongation (50/150kg)

3,2 %

Sheath percentage

30 %

Weight

75 g/m

Black

performances

Axis II 10.2 mm

Diameter

Ideal rope to begin climbing outdoors with a perfect balance between diameter and handling characteristics. Lengths: 50m, 60m, 70m, 200m Material: Polyamid Norm: CE EN 892 - UIAA Type: Code: C3R102

10,2 mm

Impact force factor 1,77

8,3 kN

Nb of falls factor 1,77

11

Elongation at the first fall

36 %

Static elongation

9,3 % 0 mm

Sheath slippage

performances

Extrem 9 mm

Top durability double rope for intensive usage. Ideal for instructors using the double rope protection system. Lengths: 50m, 100m, 200m Other lengths can be supplied on order Material: Polyamid Norm: CE EN 892 - UIAA Type: Code: CA09

Diameter

9 mm 6,25 kN

Impact force factor 1,77 Nb of falls factor 1,77

12

Elongation at the first fall

33 %

Static elongation

9 %

Sheath slippage

0 mm

Weight Black

66 g/m

Weight

Black

54 g/m

Khaki

image Flickr: SNappa2006

13


Rope specs

Type

Ø

Breaking strength (kN)

Breaking strength with figure of 8 knot (kN)

Nb of falls FF 1

Impact force factor 0,3 (kN)

Static elongation (%)

Sheat slippage (%)

Sheat percentage (%)

Weight

Shrink in water (%)

Material

CE EN 1891 - UIAA

Type A

10,5

24

17

12

5,6

3,1

0,2

36,4

67 g/m

5

Polyamid

CSTP10.xx

PROLINE 10mm

CE EN 1891 - UIAA

Type A

10

23

17

6

5

2,2

0

41,2

64 g/m

3

Polyamid

CSTP105.xx

PROLINE 10,5mm

CE EN 1891 - UIAA

Type A

10,5

26

19

22

15

4,6

4,8

0,3

44

65 g/m

3,5

Polyamid

Unicore / Stitched Eye

CSTP11.xx

PROLINE 11mm

CE EN 1891 - UIAA

Type A

11

30

19

24

> 20

4,35

4

0,93

43,7

75 g/m

3

Polyamid

Unicore / Stitched Eye

CSTP115.xx

PROMAX 11,5mm

CE EN 1891 - UIAA

Type A

11,5

40

23

24

> 20

5,1

3,7

0

32

88 g/m

3,3

Polyamid

Unicore

TEMP

Options

Standards

BUD 10,5mm

Treatment

Name

CSTB105.xx

Strenght with sewn termination (kN)

Code

STATIC Ropes

Special Ropes CSTPA.xx

TEMP 11mm

CE EN 1891 - UIAA

Type A

11

25

19

15

5,6

3,1

0

42

79 g/m

3,3

Polyamid / Aramid

CSD105

Duotech 10,5mm

CE EN 1891/892

Type A (EN1891 Simple (EN 892)

10,5

25

16,5

24

4,3

(50/150kg) 2

0,8

43

75g/m

0

Sheath: Polyamid Core: Polyamid/ Vectran

CSTOF11

Offshore 11mm

CE EN 1891 - UIAA

Type A

11

30

19

> 20

5,1

(50/150kg) 4

0,9

44

75 g/m

3

Polyamid

10

17

13

34

Unicore / Stitched Eye

Arbo Ropes CSTA10.xx

ADLINE 10mm Prussik

CSTP13.xx

QUERCUS 13mm

CSTP135.xx

CE EN 1891

SEQUOIA 13,5mm

Type A

73 g/m 19

CE EN 1891

Type A

13,5

30

18

24 22

> 20

5,3

4,2

0

61

99 g/m

Polyester 4,5

Polyamid

Stitched Eye Stitched Eye

> 20

5,1

5

0,5

82

119 g/m

2

Polyester and Polyamid

Special Tactical Ropes CSTAK11

Action 11mm

CE EN 1891

Type A

11

24

18

6

5,9

(50/150kg) 3,2

0

30

75 g/m

0,5

Sheath: Aramid Core: polyamid

CSTSPAK11

Special Action 11mm

CE EN 1891

Type B

11

26

19

8

4,7

(50/150kg) 3,3

0,6

41

81 g/m

0,5

Sheath: Aramid Core: polyamid

18

15

5,2

(50/150kg) 4

0

37

71g/m

1,5

Sheath: Polyamid/ Polyester Core: Polyamid

> 20

5

4,3

0,6

36,8

88 g/m

3,5

Polyamid

Special Rescue Ropes CSTER106

Elite rescue 10,6mm

CE EN 1891 - UIAA

Type A

10,6

25

CSTN12.xx

RESCUE 12mm

CE EN 1891 - UIAA

Type A

12

35

CST13.xx

RESCUE 13mm

CE EN 1891 - UIAA

Type A

13

44

24

> 20

5,4

2,9

0,2

37

107 g/m

0,35

Polyamid

Type A

10

23

17

6

5

(50/150kg) 4,5

0

35

68g/m

1,3

Sheath: Polyamid/ Polyester Core: Polyamid

Everdry

Canyon & Water Rescue Ropes CSTC10.xxx

Canyon 10mm

CE EN 1891 - UIAA

Everdry

Weight

Material

Treatment

Technology

CE EN 892 - UIAA

Sheat slippage (%)

Corde EXTREM 11 mm

Static elongation (%)

CA11

Elongation at first fall (%)

CE EN 892 - UIAA

Nb of falls FF 1,77

Corde EXTREM 9 mm

Impact force FF 1,77 (kN)

CA09

Ø

Standards

Corde AXIS II 10,2 mm CE EN 892 - UIAA

Type

C3R102

Name

Code

Dynamic Ropes

1

10,2

8,3

11

36

9,3

0

66 g/m

polyamide

Everdry

Perform3 HD Cover

9

6,25

12

32

9

0

54 g/m

polyamide Supereverdry (opt.)

Perform3 Sharp Edge Resistant

11

9

14

32

7,6

0

80 g/m

polyamide Supereverdry (opt.)

Perform3 Sharp Edge Resistant

q

14


Accessory ropes

Aramid cord 5,5 mm

Accessory cord with Aramid core combining high tensile strength with light weight Material: Aramid / Poluamid Diameter: 5,5 mm Breaking strength: 18 kN Weight: 23 g/m

Diameter

Weight

Breaking strength 18 kN

33,49 g/m

9,8 kN

Adline 10mm

73 g/m

17 kN

Prusik 10mm volcano

22 g/m

EN354 UIAA

Prusik 12mm volcano

22 g/m

EN354 UIAA

Cord prussik 7mm

Multi purpose Polyamide accessory cord, with great abrasion resistance thanks to a specific braiding. Its dynamic core gives an extra absorbant capacity in the safety chain. Material: Poluamid Diameter: 7 mm Breaking strength: 9,8 kN Weight: 31,9 g/m Norm: CE EN 564 - UIAA

Norm

23 g/m

Cord 5,5mm aramide

CORD Prusik 7 mm

EN564 UIAA

CORDS

Multi purpose Polyamide accessory cords, with great abrasion resistance thanks to a specific braiding. Available on roll or packet lengths Code

Diameter

length

Weight

Breaking strength

Norm

C01.200

Cord 1mm

1mm x 200m

0,65 g/m

0,35 kN

C02.60

Cord 2mm

2mm x 60m

3,6 g/m

0,8 kN

C03.60

Cord 3mm

3mm x 60m

6 g/m

1,8 kN

C04.60

Cord 4mm

4mm x 60m

10,4 g/m

3,2 kN

EN354 UIAA

C05.60

Cord 5mm

5mm x 60m

18,7 g/m

5 kN

EN354 UIAA

C06.60

Cord 6mm

6mm x 60m

23,1 g/m

7,2 kN

EN354 UIAA

C07.60

Cord 7mm

7mm x 60m

31,9 g/m

9,8 kN

EN354 UIAA

C08.60

Cord 8mm

8mm x 60m

47 g/m

12,8 kN

EN354 UIAA

C09.60

Cord 9mm

9mm x 60m

53 g/m

16,2 kN

Packed length cord Code

Diameter

length

Weight

Breaking strength

Norm

C02.10

Cord 2mm

2mm x 10m

3,6 g/m

0,8 kN

C03.10

Cord 3mm

3mm x 10m

6 g/m

1,8 kN

C04.10

Cord 4mm

4mm x 10m

10,4 g/m

3,2 kN

EN354 UIAA

C05.5

Cord 5mm

5mm x 5m

18,7 g/m

5 kN

EN354 UIAA

C06.5

Cord 6mm

6mm x 5m

23,1 g/m

7,2 kN

EN354 UIAA

C07.5

Cord 7mm

7mm x 5m

31,9 g/m

9,8 kN

EN354 UIAA

15


Slings

Sewn sling 16 mm

Sewn sling 19 mm

Tubular webbing with high resistance Width: 16 mm Breaking strength: 22 kN Material: Polyamide Lengths : 30, 60, 120, 180, 240cm Different lengths = different colours Norm: EN566, EN795B, EN354

Sewn sling 26 mm

Tubular webbing with high resistance Width: 19 mm Breaking strength: 22 kN Material: Polyamide Lengths: 30, 60, 120, 180, 240cm Different lengths = different colours Norm: EN566, EN795B, EN354

Tubular webbing with high resistance Width: 26 mm Breaking strength: 22 kN Material: Polyamide Lengths: 60 and 120cm Different lengths = different colours Norm: EN566, EN795B, EN354

Eye ring 19 mm

Tubular webbing with high resistance The red inner material guarantees you an indication when the outer has been worn out â&#x20AC;&#x201C;also this sling has a high strength 30 kN. Width: 19 mm Breaking strength: 30 kN Material: Polyamide Lengths : 60, 80, 120, 150cm Different lengths = different eye colours Norm: EN795B, EN354

Our offer of slings gives you a choice for every profession and favorite use. Thanks to our experiences, we decided to certify if possible for all 3 EN standards EN566, EN795B and EN354. 16mm, 19 mm and 26 mm Tubular open slings are completed with an offer of a 18 mm flat webbing sling. In additional we created a lightweight sling that holds up to 30kN with a reinforced eye, eye-ring called. A perfect sling to have with you under any circumstances, available in 60, 80, 120, 150 cms

Flat sling 18mm

DyneEma 10mm

Light weight sewn slings made of flat 18mm Polyamide tape Breaking strength: 22 kN Norm: EN795B, EN354, EN566 - UIAA

Light weight sewn slings made of flat 10mm Dyneema / Polyamide tape Breaking strength: 22 kN Norm: EN795B, EN354, EN566 - UIAA

length

weight

Code

length

weight

Code

30 cm

26 g

SA18.30

30 cm

11 g

SAD10.30

60cm

48 g

SA18.60

60cm

20 g

SAD10.60

120cm

92 g

SA18.120

120cm

38 g

SAD10.120

180cm

137 g

SA18.180

180cm

56 g

SAD10.180

240cm

181 g

SA18.240

240cm

73,5 g

SAD10.240

16


Trax & absorb

TRAX dynamic lanyard

Trax – Dynamic lanyard and anchor device for working at height. The dynamic lanyard fulfills for the lengths of 60, 80, 120 and 150 cms the EN standards 795B and 354. Where for the lengths 200 and 350 cms, 5 and 10 meters only are certified EN795B. Both ends of the dynamic lanyard are with stitched eye, and the stitching has a plastic cover. These lanyards improve your safety. This product is NOT a fall absorber.

length

connectors

CODE

TYPE

LENGTH

LDI.060

Trax 60

60 cm

LDI.080

Trax 80

80 cm

60 cm

LDI.120

Trax 120

120 cm

80 cm

LDI.150

Trax 150

150 cm

120 cm

x

x

150 cm

x

x

EN 795B

C23

C60

C110

x

LDI.200

Trax 200

200 cm

200 cm

x

LDI.350

Trax 350

350 cm

350 cm

x

LDL.05

Swift 5

5 m

500 cm

x

LDL.10

Swift 10

10 m

1000 cm

LDV.065

Trax V 30/65

LDV.085

Trax V 30/85

LDV.100

Trax V 100/100

LDV.150

Trax V 150/150

TYPE

CODE

ABSORB (EN355)

SHABS

Lanyard ABSORB 120cm

SHAB-I120

Lanyard ABSORB 120cm + C23 connector

SHAB-I120_C23

Lanyard ABSORB 120cm + C60 connector

SHAB-I120_C60

Lanyard ABSORB 150cm

SHAB-I150

Lanyard ABSORB 150cm + C110 connector

SHAB-I150_C110

Lanyard ABSORB 150cm + C23 connector

SHAB-I150_C23

Lanyard ABSORB 150cm + C60 connector

SHAB-I150_C60

Lanyard ABSORB 60cm

SHAB-I60

Lanyard ABSORB 80cm

SHAB-I80

Lanyard ABSORB 80cm + C23 connector

SHAB-I80_C23

Lanyard ABSORB 80cm + C60 connector

SHAB-I80_C60

Double lanyard V ABSORB 100cm

SHAB-V100

Double lanyard V ABSORB 100cm + C23 connector

SHAB-V100_C23

Double lanyard V ABSORB 100cm + C60 connector

SHAB-V100_C60

Double lanyard V ABSORB 150cm

SHAB-V150

Double lanyard V ABSORB 150cm + C110 connector

SHAB-V150_C110

Double lanyard V ABSORB 150cm + C23 connector

SHAB-V150_C23

Double lanyard V ABSORB 150cm + C60 connector

SHAB-V150_C60

x

ABSORB shock absorber

x

Shock absorber. Very small, flexible and compact fall absorber. The Absorb in combination with Trax cr eates an unique fall absorption system. Weight: 150g Basic lenght: 0,18m Max. Length after the fall (fall factor 2): 1,4m Impact force: 5,5kN

Window at the cover for checking of fall absorber

Trax dynamic lanyard combined with Absorber

17

x


carabiners

Sonic Light Alloy

Very light weight carabiner with thin body. Ideal for draws on the rope side. The wire gate avoids opening by inertia. Type: B Length: 95 mm Width: 60 mm Weight: 38 g Major axis strength: 24 kN Minor axis strength: 8 kN Open strength: 7 kN Norm: CE EN 12275 - UIAA Code: MSONIC

Top c Light Alloy

Top d Light Alloy

Link Light Alloy

Lock Light Alloy

Performance Light Alloy

Jet Light Alloy

Light weight carabiner with ergonomic shape. Catch free closure, straight gate, ideal for draws on anchor point side. Type: B Length: 96 mm Width: 59 mm Weight: 44 g Major axis strength: 24 kN Minor axis strength: 8 kN Open strength: 7 kN Norm: CE EN 12275 - UIAA Code: MTOPC

Screw gate carabiner, catch free closure and lightweight ergonomic body. Type: H Length: 105 mm Width: 66 mm Weight: 66 g Major axis strength: 28 kN Minor axis strength: 8 kN Open strength: 8 kN Norm: CE EN 12275 - UIAA Code: MLINK

Eyelet connector with triple action opening for maximum security in sportive and professional activities. Catch free closure.

Type: K / T Length: 138 mm Width: 70 mm Eyelet D: 24 mm Weight: 134 g Major axis strength: 28 kN Minor axis strength: 10 kN Open strength: 10 kN Norm: CE EN 12275 / 362 - UIAA Code: MPERFORMANCE

Light weight carabiner with ergonomic shape. Catch free closure, straight gate, ideal for draws on anchor point side. Type: B Length: 96 mm Width: 59 mm Weight: 44 g Major axis strength: 24 kN Minor axis strength: 8 kN Open strength: 7 kN Norm: CE EN 12275 - UIAA Code: MTOPD

Eyelet connector with triple action opening for maximum security in sportive and professional activities. Catch free closure. Type: D / T Length: 140 mm Width: 79 mm Eyelet: 22 mm Weight: 102 g Major axis strength: 25 kN Minor axis strength: 8 kN Open strength: 8 kN Norm: CE EN 12275 / 362 - UIAA Code : MLOK

Screw gate carabiner, catch free closure and light weight ergonomic body. Type: H Length: 107 mm Width: 66 mm Weight: 65 g Major axis strength: 28 kN Minor axis strength: 8 kN Open strength: 7 kN Norm: CE EN 12275 - UIAA Code: MJET

18


carabiners

Guard Light Alloy

Guard 3 Light Alloy

Guard O Light alloy

Z101 steel

Z102 steel

Z103 steel

Z500 steel

Z503 steel

Screw gate HMS carabiner with catch free closure. Type: H / B Length: 120 mm Width: 76 mm Weight: 86 g Major axis strength: 24 kN Minor axis strength: 8 kN Open strength: 8 kN Norm: CE EN 12275 / 362 - UIAA Code : MGUARD

Screw gate oval carabiner with catch free closure. Type: X / B Length: 110 mm Width: 61 mm Weight: 74 g Major axis strength: 21 kN Minor axis strength: 8 kN Open strength: 8 kN Norm: CE EN 12275 / 362 - UIAA Code : MGARDO

Steel carabiner – twist gate Type: B Length: 107 mm Width: 57 mm Weight: 197 g Major axis strength: 30 kN Minor axis strength: 8 kN Open strength: 8 kN Norm: EN 362 Code: MZ102

Steel carabiner – twist gate Type: B Length: 110 mm Width: 68 mm Weight: 251 g Major axis strength: 52 kN Minor axis strength: 16 kN Open strength: 18 kN Norm: EN 362 Code: MZ500

Triple action opening HMS carabiner with catch free closure. Type: H / B Length: 120 mm Width: 76 mm Weight: 100 g Major axis strength: 24 kN Minor axis strength: 8 kN Open strength: 8 kN Norm: CE EN 12275 / 362 - UIAA Code: MGUARD3

Steel carabiner – screw gate Type: B Length: 107 mm Width: 57 mm Weight: 179 g Major axis strength: 30 kN Minor axis strength: 8 kN Open strength: 8 kN Norm: EN 362 Code: MZ101

Steel carabiner – triple action gate Type: B Length: 107 mm Width: 57 mm Weight: 198 g Major axis strength: 30 kN Minor axis strength: 8 kN Open strength: 8 kN Norm: EN 362 Code: MZ103

Steel carabiner – triple action gate Type: B Length: 110 mm Width: 68 mm Weight: 251 g Major axis strength: 52 kN Minor axis strength: 16 kN Open strength: 18 kN Norm: EN 362 Code: MZ503

19


Connectors & Belay devices

Quick link steel

C23 steel

C60 light alloy

C110 light alloy

Guru Alpin light alloy

Guru + light alloy

D8 light alloy

S8 light alloy

Oval 8mm diameter quick link with screw gate. Type: Q Length: 76 mm Width: 25 mm Ø: 8 mm Weight: 76 g Breaking Strength: 25 kN Norm: CE EN 12275 - UIAA Code: MRAPID8

Double gate automatic connector with wide 60 mm opening for scaffolding and other metallic structure. Length: 236 mm Width: 114 mm Eyelet: 22 mm Breaking strength: 22 kN Weight: 475 g Norm: EN 12278 - UIAA Code: MC60

Belay device for single or double ropes diameter 7,9 to 11mm with additional notch on one side to create additionnal braking friction and carabiner holes for easy belaying in multipitch routes. Height: 114 mm Width: 43 mm Weight: 99 g Code: MGURUALP

Figure of eight belay device with ears allowing a locking key. Height: 108 mm Width: 80 mm Weight: 92 g Breaking strength: 25 kN Code: MD8

Double gate automatic connector with 18 mm opening. Length: 136 mm Width: 60 mm Eyelet: 22 mm Breaking strength: 22 kN Weight: 230 g Norm: CE EN 362 Code: MC23

Double gate automatic connector with wide 110 mm opening for scaffolding and other metallic structure Length: 358 mm Width: 165 mm Eyelet: 27 mm Breaking strength: 25 kN Weight: 920 g Norm: EN 12278 - UIAA Code: MC110

Belay device for single or double ropes with additional notch on one side to create additionnal braking friction. Height: 114 mm Width: 55 mm Weight: 93 g Code: MGURU+

Versatile medium size figure of eight belay device. Height: 132 mm Width: 74 mm Weight: 102 g Breaking strength: 25 kN Code: MS8

20


pulleys

Pulley 213 R light alloy

Rotor 113 R light alloy

Trafic 116 light alloy

Trafic 111 light alloy

Swivel light alloy

Trafic 216 light alloy

Double pulley with water proof ball bearings. Can be used on rope up to maximum 13 mm diameter and metal cable with max. 12 mm diameter. Breaking strenght: 25 kN Weight: 291 gr Norm: CE EN 12278 Code: MP213R

Lightweight Pulley to be used with rope max diameter 16 mm - can be used with Prusik friction cord. Maximum breaking strength: 30 kN. Weight: 246 gr. Norm: EN 12278 Code: MP116

Swivel avoids twisting in a lanyard or rope system. Length: 115mm Width: 55mm Breaking strength: 30kN Weight: 162 g Norm: CE EN 354 - UIAA Code: MSW

Pulley with ballbearing to be used up to rope 13mm diameter. Small, lightweight mainly used for hauling systems. NORM: EN 12278 - UIAA Code: MP113R

Lightweight Pulley to be used with rope max diameter 16 mm - can be used with Prusik friction cord. Maximum breaking strength: 20 kN. Weight: 121 gr. Norm: EN 12278 Code: MP111

Lightweight Pulley with bottom attachment point, to be used with rope max diameter 16 mm â&#x20AC;&#x201C; can be used with Prusik friction cord. Maximum breaking strength: 30 kN. Weight: 423 gr. Norm: EN 12278 Code: MP216

image: olof fredrikze

21


INDUSTRIAL technology

Hercules EVO sit Padded and ergonomic shoulder straps to reduce chafing.

Special loops for your extra equipment.

Narrow padding of shoulders.

Upper front attachment point EN361.

The lower front attachment point EN 813 distributes the weight more evenly between the waistbelt and the leg loops. Excellent movement is granted.

Extra-protected point even for additional connector or PPE gear. Increases comfort during abseiling.

Lateral point EN 358 at GO position.

New modern padding, designed for all professionals. Allows grate movement and support.

Lateral point EN 358 at LOCK position.

Elastic straps for your free movement.

Slim strap with well done made padding. As yours experiences requires.

22


harnesses

Hercules EVO sit

Made from highly resistant materials Padding is reinforced with polyethylene plate Revolving side attachment points 180° according to EN 358 Formed and braided gear loops Supporting lots for your equipment with a guarantee capacity of 10kg Additional loop for your equipment with a guarantee capacity of 5kg Streak reflex at waist belt Textile loop for EN 813 attachment point is extra protected 4 x light buckles Easily to combine with Hercules shoulders Norm: EN 813, EN 358 CE 0120 S: Height: 155-175cm Waist: 70-90cm Legs: 55-65cm M-L: Height: 170-185cm Waist: 80-105cm Legs: 55-65cm XL: Height: 180-210cm Waist: 90-130cm Legs: 60-75cm Code: HEREVO.SIT

Hercules action sit

Made from highly resistant materials Padding is reinforced with polyethylene plate Revolving side attachment points 180° according to EN 358 Formed and braided gear loops Supporting lots for your equipment with a guarantee capacity of 10kg Additional loop for your equipment with a guarantee capacity of 5kg Streak reflex at waist belt Textile loop for EN 813 attachment point is extra protected 4 x speed buckles Easily to combine with Hercules shoulders In the design of the Hercules Action safe Cobra buckles are used to quickly open and close the harness in any situation where this is needed. This gives a guarantee to adjust it quickly to your body. Norm: EN 813, EN 358 CE 0120 S: Height: 155-175cm Waist: 70-90cm Legs: 55-65cm M-L: Height: 170-185cm Waist: 80-105cm Legs: 55-65cm XL: Height: 180-210cm Waist: 90-130cm Legs: 60-75cm Code: HER.AK.SIT

23


harnesses

Hercules EVO shoulder

Made from highly resistant materials Anatomic shoulders perfectly fit to users Front and back attachment points EN 361 made from steel Loop for connector (eliminating risk of bypass) All very stressed places are extra protected Easily to combine with Hercules Evo sit and Hercules action sit Norm: EN 361 together with sit harness CE 0120 S: Height: 155-175cm M-L: Height: 170-185cm XL: Height: 180-210cm Code: HEREVO.SHO

Delta Rescue

Rescue harness and sling. Big textile attachment points. Back attachment point. Norm: EN 1497, EN 1498 CE 0120 Size: uni

Hercules EVO full body

Combination of sit and shoulders Norm: EN 813, EN 358, EN 361 CE 0120 S : Height: 155-175cm Waist: 70-90cm Legs: 55-65cm M-L: Height: 170-185cm Waist: 80-105cm Legs: 55-65cm XL : Height: 180-210cm Waist: 90-130cm Legs: 60-75cm Code: HEREVO.FUL

24


harnesses

Vulcain

Front attachment point EN 361. Easy to wear. Different colours of leg straps and shoulders. Safe, light and quick buckle. Holds body at the proper position. Unlimited freedom of movement. Norm: EN 361 CE 0120 Sizes: Uni Weight: 780g Code: HVUL

Vulcain jack

Including functional jack Front attachment point EN 361 Easy to wear Different colours of leg straps and shoulders Safe, light and quick buckle Holds body at the proper position Unlimited freedom of movement Norm: EN 361 CE 0120 Sizes: Uni Code: HVUL.J

25


Harnesses

Explorer II

Rope Course â&#x20AC;&#x201C;adventure parks Harness â&#x20AC;&#x201C; the front attachment point is a metal ring, avoiding this way that users will click in a wrong way. Totally USER FRIENDLY, this point can be used as EN361 but also be moved to position of EN813. Easy to put on and off as for each leg loop there is a different color of webbing used. The harness gives an unlimited freedom of movement during activities. Explorer comes in 2 sizes, one for smaller people and a bigger version for taller users. 2 gear loops. Front fulfilling to EN813, Front attachment point can also placed that it functions as EN361 Material: Polyamid / Polyester Norm: CE EN 12277- UIAA / CE EN 361-813 Type: C Code: HEXP.II EN 813

EN 361=2/3 3/3 2/3 1/3 0

Challenge HG

HG: Adjustable unpadded harness with three auto locking buckles and two sliding gear loops. A single visible attachment point, closing of the waist on the right side, for easy checking by the instructor in rope courses. Ideal for via ferrata and activity centres. Material: Polyamid Norm: CE EN 12277 - UIAA Type: C Code: HCC Code: HCC.XL

Challenge BG

BG: Completely adjustable chest harness with compact construction. Developed for use with our Challenge sit harness. Raises safety margin in falls. Can be used with any sit harness. Material: Polyamid Norm: CE EN 12277 - UIAA Type: C Code: HCT

26


rope gear & Promo gear

Rope CLEANER

ROPE BRush

A none-aggressive detergent developed for easy cleaning of polyamide products / ropes or harnesses. However the water temperature used should be less than 30 Celcius. Code: D.ROCLEAN

Our own development for cleaning ropes after action. The brush adapts easy to different rope diameters. Fix the brush on the rope, then slide the brush along the rope while holding the rope under water. Code: D.ROBRUSH

thermo cutter

This Thermocutter features an electrically heated blade designed for cutting all ropes easily and effortlessly. Heats up instantly.

Perfect glove Leather glove with palm reinforcement for via ferrata and other vertical activities. Sizes: S-M-L Material: 70% cowhide leather, 15% cow suede leather and 15% nylon stretch fabric Code: GL01

rescue T

work T

100% cotton, comfort fit and climbing spirit ! Tee shirt available in assorted colours and designs. Material: Cotton 190 g /m2 Sizes: XS > XL Code Work T: T.09 Code Rescue T: T.08

BLACK cap

Logo embroidered Cap / one size fits all Code: P.CAP13

EDELWEISS TUMBLER

Whatever activity you are doing a cup hot coffee or chocolate is always welcome . For this purpose we are able to supply you with the Edelweiss Tumbler, 280 ml standard red Edelweiss color. Code: PGOB.1

27


www.edelweiss-ropes.com The data given in this catalogue are guidelines for assessing the quality of our products. More detailed specifications currently applicable are available on request. We reserve the right to make changes called for by technical development as well as changes in colour. Printed- and typesetting errors reserved. EDELWEISS速 EVERDRY速, PERDUR速 are trademarks for which the EDELWEISS S.A. has registered rights in one or several countries of the world.

Edelweiss Professional

2, boulevard Pierre Joannon 42400 SAINT-CHAMOND - FRANCE T辿l +33 (0)4 77 29 22 80 - Fax +33 (0)4 77 31 81 26 info@edelweiss-ropes.com

Edelweiss Pro 2013  

Industrial catalog