ELECTRONIC OFFSET CENTERLINE CALIPER
Code
Range
1182-150
10-150mm/0.4-6"
1182-200
10-200mm/0.4-8"
1182-300
10-300mm/0.4-12"
Measure center to center distance of holes and measure distance from edge to center of holes Resolution: 0.01mm/0.0005" The adjustable left jaw permits measurement of even and uneven planes Hole diameter should be larger than 1.5mm/0.06" but small than 10mm/0.39" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare battery Data output Hardened stainless steel construction Packed in plastic box or wooden box
OFFSET CENTERLINE VERNIER CALIPER
Code
Code
Range
1282-150
5-150mm/0.2-6"
1282-200
5-200mm/0.2-8"
1282-300
5-300mm/0.2-12"
Range
Measure center to center distance of holes and measure distance from edge to center of holes Graduation: 0.05mm/1/128" optional graduations: 0.02mm, 0.05mm, 0.02mm/0.001" The adjustable left jaw permits measurement of even and uneven planes Hole diameter should be larger than 1.5mm/0.06" but small than 10mm/0.39" Made of hardened stainless steel, stain chrome plated reading surface Packed in plastic box or wooden box
35