Page 1

Discover the Possibilities ®

SOLBERG

REPLACEMENT ELEMENTS TABLE OF CONTENTS Full line of replacement elements for Solberg products and many nonstandard and competitive elements available. Call for assistance. Patented Series: Compact “Hockey Puck” style patented filter element ● Up to 250 SCFM

pg. 2

Small Compact Series: ● Up to 300 SCFM

pg. 3

Compact/Big Boy Series: ● 275 to 6600 SCFM International 800 Series:

pg. 4 pg. 5

Odd Sized Elements:

pg. 6

Oil Mist Exhaust Series: ● Coalescing Elements

pg. 7

Bulletin EL-160

Visit Solberg on the Web: WWW.SOLBERGMFG.COM

REPLACEMENT ELEMENTS

Media for Special Applications pg. 8 Includes HEPA, high temperature, ultra low particle retention, food grade and mild corrosive media. Stainless steel elements and configurations available.


Small Compact “Hockey Puck” Patented Elements ®

Up to 250 SCFM

FEATURES & SPECIFICATIONS Patented High grade filter element Built-in Vacuum Tight Butterfly Gasket Seal -Positive seal between housing hemispheres -New seal with each element -Minimizes parts Optimal surface area per given size Pleated Media for High Dirt Holding Capacity Temp: (continuous): min -15°F (-26°C) max 220°F (104°C) Filter change out differential: 10" – 15" H2O Over Initial Delta P

BENEFITS Maximized surface area over cartridge style element in reduced space Potential bypass is eliminated with completely encapsulated pleat ends Multiple configurations available

Increased aftermarket sales revenue with patented design Reduced warranty return costs Improved Equipment performance Reduced maintenance costs

ADVANTAGES

ADVANTAGES

Patented design Washable - lukewarm water & mild detergent Less maintenance & more durable Moisture resistant Handles hot air and oil mist from unload cycle of reciprocating/piston compressor

Patented design Heavy duty industrial strength paper Higher efficiency than many alternative media Cost effective

OPTIONS (Inquiries Encouraged) REPLACEMENT ELEMENTS

Proprietary designs available Molding materials: santoprene, pvc, urethane

Media: HEPA, polyester, paper, activated carbon

MULTIPLE CONFIGURATIONS

DRAWING

Examples of Possible Configurations: Elliptical, Round, Proprietary Designs

Polyester Element 03 05 07 11 17

Paper Element 02 04 06 10 16

DIMENSIONS - inches OD HT 1 1/2 1 2 1/4 1 3 1 3/8 4 1 3/8 8 3 1/4

Surface 2 Area ft 0.1 0.2 0.58 1.1 8

Element construction is of Injection Molded Santoprene

Dimension tolerance + 1/4”

Note: Model offerings and design parameters may change without notice.

1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com

Solberg – Discover the Possibilities

EPT-5214

Rated Flow SCFM 3 8 12 35 250

pg. 2


Small Compact Polyester & Paper Elements ®

Up to 570 SCFM and Housings up to 3"

POLYESTER ELEMENTS

PAPER ELEMENTS 99%+ removal efficiency to 2 micron Pleated Media for High Dirt Holding Capacity Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal Dust loading capacity is increased 40 - 50% with polyurethane prefilter Temp (continuous): min: -15°F (-26°C) max 220°F (104°C) Optimal sealing surface & design

99%+ removal efficiency to 5 micron Pleated Media for High Dirt Holding Capacity Reinforced with epoxy coated steel wire on both sides of cloth Washable - lukewarm water & mild detergent Dust loading capacity is increased 40 - 50% with polyurethane prefilter Temp (continuous): min -15°F (-26°C) max 220°F (104°C) Optimal sealing surface & design

Particle Size vs. Filter Efficiency on polyester media at indicated face velocity: 15 cfm/ft² media 30 cfm/ft² media 45 cfm/ft² media

Particle Size vs. Filter Efficiency on paper media at indicated face velocity: 10 cfm/ft² media 15 cfm/ft² media 20 cfm/ft² media

ADVANTAGES Less maintenance More durable Moisture resistant Handles hot air and oil mist from unload cycle of reciprocating/piston compressor

CONFIGURATION

Optimal surface area per given size Higher efficiency than many alternative media Cost Effective

DRAWING Face Velocity vs. Dust Holding Capacity

Polyester Elements 15P 19P® 31P 231P

Paper Elements 14P 18P 30P 230P

STD Endcap Features M M M M

DIMENSIONS - inches Polyester Paper 2 ID OD HT Surface Area ft 3 4 3/8 2 5/16 0.50 1.12 3 4 3/8 4 3/4 1.5 3.0 3 5/8 5 3/4 4 3/4 2.3 6.2 3 5/8 5 3/4 9 1/2 4.5 11.8

P = Polyurethane Prefilter Included

Rated Flow SCFM 35 100 195 300

Legend B= Closed one end w/ Bolt hole, open on other end C= Closed one end, open on other end F= Felt gaskets on open end(s) G= Galvanized metal endcaps I= Injection molded santoprene M= Molded plastisol N= Neoprene gaskets on open end(s) R= Mixed Rubber/cork gasket on open ends T= Tin plated metal endcaps See back page for information about media for special applications.

Note: Model offerings and design parameters may change without notice.

1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com

Solberg – Discover the Possibilities

ES-306

pg. 3

REPLACEMENT ELEMENTS

Dimension tolerance + 1/4"


Compact/Big Boy Polyester & Paper Elements ®

Up to 6600 SCFM and Housings up to 12"

POLYESTER ELEMENTS

PAPER ELEMENTS 99%+ removal efficiency to 2 micron Pleated Media for High Dirt Holding Capacity Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal Dust loading capacity is increased 40 - 50% with polyurethane prefilter Temp (continuous): min: -15°F (-26°C) max 220°F (104°C) Optimal sealing surface & design

99%+ removal efficiency to 5 micron Pleated Media for High Dirt Holding Capacity Reinforced with epoxy coated steel wire on both sides of cloth Washable - lukewarm water & mild detergent Dust loading capacity is increased 40 - 50% with polyurethane prefilter Temp (continuous): min -15°F (-26°C) max 220°F (104°C) Optimal sealing surface & design

Particle Size vs. Filter Efficiency on polyester media at indicated face velocity: 15 cfm/ft² media 30 cfm/ft² media 45 cfm/ft² media

Particle Size vs. Filter Efficiency on paper media at indicated face velocity: 10 cfm/ft² media 15 cfm/ft² media 20 cfm/ft² media

ADVANTAGES Less maintenance More durable Moisture resistant Handles hot air and oil mist from unload cycle of reciprocating/piston compressor

CONFIGURATION

Optimal surface area per given size Higher efficiency than many alternative media Cost Effective

DRAWING

REPLACEMENT ELEMENTS

Face Velocity vs. Dust Holding Capacity

Polyester Models 35P 235P 335P 239P 245P 345P 275P 375P 377P 385P 485P 685P

Paper Models 34P 234P 334P 238P 244P 344P 274P 374P 376P 384P 484P

STD Endcap Features M M M GBN GN | M GN GN GN GN GN GN GN

Dimension tolerance + 1/4" DIMENSIONS - inches Polyester Paper 2 ID OD HT Surface Area ft 4 3/4 7 7/8 4 13/16 4.0 11.0 4 3/4 7 7/8 9 5/8 8.3 22.8 4 3/4 7 7/8 14 1/2 12 34 4 7/8 9 1/4 10 11.5 52 6 9 3/4 9 5/8 14 35.5 6 9 3/4 14 1/2 22.1 57 8 11 3/4 9 5/8 19 45.4 8 11 3/4 14 1/2 28 68.1 9 14 5/8 14 1/2 50 125 14 19 5/8 14 1/2 50 140 14 19 5/8 21 1/2 75 200 14 19 5/8 28 1/2 100

Rated Flow SCFM 275 570 800 570 880 1100 1100 1500 1825 3300 4705 6600

Legend B= Closed one end w/ Bolt hole, open on other end C= Closed one end, open on other end F= Felt gaskets on open end(s) G= Galvanized metal endcaps I= Injection molded santoprene M= Molded plastisol N= Neoprene gaskets on open end(s) R= Mixed Rubber/cork gasket on open ends T= Tin plated metal endcaps See back page for information about media for special applications.

P = Polyurethane Prefilter Included Note: Model offerings and design parameters may change without notice.

1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com

Solberg – Discover the Possibilities

ELC-304

pg. 4


International 800 Series Elements Polyester & Paper Elements ®

POLYESTER ELEMENTS

PAPER ELEMENTS 99%+ removal efficiency to 2 micron Pleated Media for High Dirt Holding Capacity Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal Dust loading capacity is increased 40 - 50% with polyurethane prefilter Temp (continuous): min: -15°F (-26°C) max 220°F (104°C) Optimal sealing surface & design

99%+ removal efficiency to 5 micron Pleated Media for High Dirt Holding Capacity Reinforced with epoxy coated steel wire on both sides of cloth Washable - lukewarm water & mild detergent Dust loading capacity is increased 40 - 50% with polyurethane prefilter Temp (continuous): min -15°F (-26°C) max 220°F (104°C) Optimal sealing surface & design

APPLICATIONS Vacuum Pumps Air Compressors

Printing Industry Medical Field

ADVANTAGES-POLYESTER Less maintenance More durable than paper media Moisture resistant Handles hot air and oil mist from unload cycle of reciprocating/piston compressor

ADVANTAGES-PAPER Maximum holding capacity Higher efficiency than many alternative media Cost Effective Stock Quantities

CONFIGURATION

DRAWING

Legend B= Closed one end w/ Bolt hole, open on other end C= Closed one end, open on other end F= Felt gaskets on open end(s) G= Galvanized metal endcaps I= Injection molded santoprene M= Molded plastisol N= Neoprene gaskets on open end(s) R= Mixed Rubber/cork gasket on open ends T= Tin plated metal endcaps

Mann No. C31 C31/1 C32 C42/1 C42/2 C43 C44 C64/1 C64/3 C66 C66/1 C74 C75 C75/2 C76/2 C79/1 C79/2 C713 C718 C912 C1049 C1112 C1112/2 C1132 C1337 C15124/1 C711/1 C411 C26240 C1574 C21138/1 N/A C69/1 C75/2 N/A N/A

STD Endcap Features TB TB TB TB TB TB TC TB TC TB TB TF1 TC TCF TC TB TCF TBHF TBHF TCF T T TCF T T TR TC TB T T T M TB TBF TCF TB

Polyester

Ref.

STD Endcap

Element

Mann No.

Features

ID

OD

HT

SCFM

821

C66/1

TB

11/16

2 5/16

2

18

825

C75

TC

1 1/2

2 1/2

2 11/16

25

827

C75/2

TCF

1 1/2

2 1/2

2 13/16

20

841

C1049

T

1 3/4

3 5/8

5 5/8

80

843

C1112

T

2 3/8

3 7/8

2 3/4

55

845

C1112/2

TCF

2 3/8

3 7/8

2 3/4

55

847

C1132

T

2 3/8

3 7/8

3 15/16

62

849

C1337

T

2 9/16

5

4 3/4

115

851

C15124/1

TR

3 1/2

5 7/8

8 3/4

290

857

C26240

T

7 11/16

10

7 11/16

375

859

C1574

T

3 1/2

5 7/8

4 7/8

110

863

C21138/1

T

5 11/16

8 3/8

6 7/16

322

879

N/A

TB

2 9/16

5

4 3/4

115

See back page for information about media for special applications.

Note: Model offerings and design parameters may change without notice.

DIMENSIONS - inches

Surface Area ft2 0.14 0.22 0.35 0.33 0.18 0.55 0.33 0.55 0.55 0.89 0.76 0.29 0.92 0.86 0.48 0.91 0.82 1.5 1.8 1.2 3.5 1.7 1.8 2.7 5.0 14 0.97 1.1 17 7.6 14 1 1.2 0.93 5.0

Rated Flow SCFM 3 5 9 8 4 13 8 13 13 20 18 7 25 20 12 24 19 40 48 30 80 55 55 62 115 290 24 27 375 152 322 25 30 24 115

Rated Flow

1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com

Solberg – Discover the Possibilities

E8C-5214

DIMENSIONS - inches ID OD HT 3/8 1 1/8 1 1/6 3/8 1 1/8 1 1/2 3/8 1 1/8 2 7/16 1/2 1 1/2 1 1/2 1/2 1 1/2 1 1/8 1/2 1 1/2 2 7/16 1/2 1 1/2 1 1/2 11/16 2 5/16 1 9/16 11/16 2 5/16 1 9/16 11/16 2 5/16 2 7/16 11/16 2 5/16 2 1 2 11/16 1 1 1/2 2 1/2 2 11/16 1 1/2 2 1/2 2 13/16 1 1/2 2 1/2 1 3/4 1 2 1/2 2 7/8 1 1/2 2 1/2 2 11/16 1 1/2 2 1/2 4 1/2 1 1/2 2 1/2 6 9/16 2 3/8 3 5/16 2 3/4 1 3/4 3 5/8 5 5/8 2 3/8 3 7/8 2 3/4 2 3/8 3 7/8 2 3/4 2 3/8 3 7/8 3 15/16 2 9/16 5 4 3/4 3 1/2 5 7/8 8 3/4 1 1/2 2 11/16 2 3/4 1/2 1 1/2 5 1/3 7 11/16 10 7 11/16 3 1/2 5 7/8 4 7/8 5 11/16 8 3/8 6 7/16 2 3/8 3 11/16 2 15/16 1 1/8 1 15/16 5 5/8 1 1/2 2 1/2 2 13/16 6 8 1/2 3 1/2 2 9/16 5 4 3/4

pg. 5

REPLACEMENT ELEMENTS

Dimension tolerance + 1/4"

Paper Element 800 802 804 806 808 810 812 814 816 818 820 822 824 826 828 830 832 834 836 838 840 842 844 846 848 850 852 854 856 858 862 868 870 872 874 878


Odd Sized Elements ®

FEATURES & SPECIFICATIONS

REPLACEMENT ELEMENTS

Polyester Elements: 99%+ removal efficiency standard to 5 micron Reinforced with epoxy coated steel wire on Both sides of the cloth Washable - lukewarm water & mild detergent Paper Elements: 99%+ removal efficiency standard to 2 micron Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal

Dimension tolerance + 1/4"

Legend B= Closed one end w/ Bolt hole, open on other end C= Closed one end, open on other end F= Felt gaskets on open end(s) G= Galvanized metal endcaps I= Injection molded santoprene M= Molded plastisol N= Neoprene gaskets on open end(s) R= Mixed Rubber/cork gasket on open ends T= Tin plated metal endcaps

Specifications: Pleated Media for High Dirt Holding Capacity Optimal surface area per given size Dust loading capacity is increased 40 - 50% with polyurethane prefilter Temp: (continuous): min -15°F (-26°C) max 220°F (104°C) Filter change out differential: 10"-15" H2O Over Initial Delta P

Polyester Paper STD Endcap Element Element Features 09 08 GN 903 M 21NP** M 25 24 M C475538 M 80P M 84P M 45P 44P M 74P M 371P 370P GN 391 390 GN 491 490 GN 545P GN 571P GN 575P GN 585P GN 100 M 101 M 102 M 103 M 104 M 105 M 106 M 107P M 108 M 109 M 120 GN 121 M 122 GN 123 M 124 M 125 GN 126 GN 135 M

2

Surface Area ft DIMENSIONS - inches ID OD HT Polyester Paper 1 1/8 2 1/4 2 1/4 0.25 0.45 4 3/4 6 3/16 5 3/8 1.5 2 3/8 4 1/4 4 3/4 1.7 3 5/8 5 7/8 4 2.0 4.7 4 5 3/8 4 3/4 6.5 4 1/8 7 7/8 3 7.1 4 1/8 7 7/8 4 10.3 6 9 3/4 4 3/4 6.9 17.2 8 11 3/4 5 21.0 10 13 3/4 14 1/2 72.2 22 1/4 27 7/8 14 1/2 100 275 22 1/4 27 7/8 21 1/2 145 400 6 9 3/4 24 1/2 56 10 13 3/4 24 1/2 100 8 11 3/4 24 1/2 84 14 19 5/8 24 1/2 195 1 1/4 3 7/8 2 3/4 2.3 4 1/2 6 5/8 5 1/8 5.7 5 11/16 7 3/4 3 3.3 7 1/4 9 3/4 5 15/16 13.4 5 1/8 7 1/4 5 3/8 7.1 5 3/32 6 15/16 5 13/16 8.1 7 3/4 12 4 1/2 19.4 1 3/16 2 3/4 2 1/2 0.7 3 5/8 5 3/4 2 7/8 3.0 5 5/8 7 3/4 4 6.8 4 7/8 8 1/2 4 5/8 11.5 4 5 3/8 4 7/8 3.1 5 1/4 10 3/16 5 3/8 20.0 11 1/2 13 5/8 3 5.9 11 1/2 13 5/8 4 1/8 7.8 1 7/16 3 4 15/16 1.6 4 3/4 6 1/2 2 1/8 2.1 11 1/2 13 5/8 8 5/8 21

Rated Flow SCFM 15 70 80 105 150 175 255 430 560 1800 5500 8000 1700 3000 2500 5000 50 120 85 520 150 205 400 20 60 170 250 60 450 150 195 90 100 1100

* 4 micron media

See back page for information about media for special applications.

Note: Model offerings and design parameters may change without notice.

1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com

Solberg – Discover the Possibilities

EOD-5214

pg. 6


Coalescing Elements For Oil Mist Exhaust Filter Housing Series ®

FEATURES & SPECIFICATIONS 99.97% D.O.P. efficiency on 0.3 micron diameter particles Reinforced with epoxy coated steel wire. Expanded metal support on both sides of cloth

Temperatures (continuous): min: 40°F (4°C) max: 220°F (104°C) Filter change out differential: Please refer to Vacuum Pump Manufacturer’s specifications

ADVANTAGES High efficiency at low pressure drop Increased Surface Area in a given volume allows low velocity separation of ultra-fine oil mists

CONFIGURATION

High gravimetric efficiency means low oil carryover Pleated media for high holding capacity Environmentally friendly sealing material

DRAWING

Dimension tolerance + 1/4"

STD Endcap Features M M M M M M M M GC GB GB G GB G GB GB GB GB GB G

DIMENSIONS - inches ID OD HT 1 1/4 2 1/4 2 1/8 1 1/4 2 1/4 3 1 1/4 2 1/4 4 3 4 4 3 4 6 3 7/8 5 4 1/4 8 9 4 3/4 8 9 6 1/2 1 13/16 1 7/16 3/4 2 5/16 2 3/8 1 1/2 3 4 7/8 2 9/16 5 4 3/4 3 1/2 5 7/8 8 3/4 2 9/16 5 14 1/4 3 1/2 5 7/8 14 6 9 3/4 9 5/8 6 9 3/4 14 1/2 8 11 3/4 14 1/2 8 11 3/4 21 1/2 9 14 5/8 21 1/2

* Note: Element has molded tube outlet. Note: Model offerings and design parameters may change without notice.

Legend B= Closed one end w/ Bolt hole, open on other end C= Closed one end, open on other end F= Felt gaskets on open end(s) G= Galvanized metal endcaps I= Injection molded santoprene M= Molded plastisol N= Neoprene gaskets on open end(s) R= Mixed Rubber/cork gasket on open ends T= Tin plated metal endcaps See back page for information about media for special applications.

1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com

Solberg – Discover the Possibilities

EG-5214

Rated Flow SCFM 4 4.5 7 16 24 30 44 55 4 10 20 50 125 175 200 300 500 800 1100 1800

pg. 7

REPLACEMENT ELEMENTS

Coalescing Element FG3 FG5 FG7 FG9 FG10 FG11 FG20 FG24 *GL910 *GL915 GL925 PSG848 PSG850/1 PSG145 PSG860/1 PSG244/2 PSG344/2 PSG374/2 PSG474/2 PSG476


Media for Special Applications ®

INCREASED EFFICIENCY

COARSE EFFICIENCY

4 Micron Polyester Elements "N" Series 99.9+% removal efficiency to 4 μm Nomenclature: i.e. 19N 1 Micron Polyester Elements "Z" Series 99.9+% removal efficiency to 1 μm Nomenclature: i.e. 235Z Specifications Reinforced with epoxy coated steel wire on both sides of cloth Washable - lukewarm water & mild detergent Dust loading capacity is increased 40 - 50% with polyurethane prefilter Optimal sealing surface & design

25 Micron Polyester Elements "U" Series 99+% removal efficiency to 25 μm Nomenclature: i.e. 377U 100 Micron Polyester Elements "W" Series 99+% removal efficiency to 100 μm Nomenclature: i.e. 485W Specifications Reinforced with epoxy coated steel wire on both sides of cloth Washable - lukewarm water & mild detergent Dust loading capacity is increased 40 - 50% with polyurethane prefilter Optimal sealing surface & design

HEPA Elements "HE" Series 99.97% D.O.P. efficiency to 0.3 μm Nomenclature: i.e. HE30 Heavy duty industrial strength glass surrounded by heavy gauge galvanized expanded metal Maximum oversizing required to minimize pressure drop Dust loading capacity is increased 40 - 50% with polyurethane prefilter Optimal surface area per given size

REPLACEMENT ELEMENTS

CHEMICAL ADSORPTION Activated Carbon "AC" Series Wound activated carbon impregnated polyester media Dual filtration, stops both particulate matter and gas or vapor odors and contaminants Available as: - Replacement element Nomenclature: i.e. AC234 - Activated Carbon wrap for standard elements Nomenclature: i.e. Wrap only: ACP30 Std Element with activated carbon wrap: 484ACP or 485ACP Activated Carbon Granulate, "ACG" Series and Activated Alumina, "AA" Series also available. Contact Solberg for more information. 1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 General Office: 630.616.4400 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com EMD-5214

Stainless Steel Wire Mesh Elements "S2" Series Stainless steel wire mesh Nomenclature: i.e. 244S2 Corrosive Applications -Mosquito abatement -Chemical processing -Hydraulic Low maintenance Epoxy Coated Wire Mesh Elements "S" Series

STAINLESS STEEL SERIES “J”, “K”, “Q”, “R”, and “D” Options Stainless Steel I.D. and O.D. construction Silicone endcaps available Special Gaskets/Sealing Chemically resistant High Temperature applications

CHEMICAL GRADE MEDIA Polypropylene "Y" Series 99+% removal efficiency to 5 μm Nomenclature: i.e. 685Y Chemical resistant media Low pressure drop Reinforced with epoxy coated steel wire on both sides of media PTFE Media available. Contact Solberg for more information.

COALESCING MEDIA FOR OIL MIST 99.97% D.O.P. efficiency on 0.3 μm diameter particles Custom internal multi-stage layering to meet specific application needs Specifications Reinforced with epoxy coated steel wire on both sides of cloth High efficiency at low pressure drop Increased surface area in a given Volume allows low velocity separation of ultra-fine oil mists High D.O.P. efficiency - low oil carryover Environmentally friendly sealing material Temperature (continuous): minimum 40°F (4°C) maximum 220°F (104°C) Filter change out differential: Please refer to Vacuum Pump Manufacturer’s specifications

HIGH TEMPERATURE Nomex Cloth Elements "MX" Series 99+% removal efficiency to 5 μm Nomenclature: i.e. 275MX Food grade silicone adhesive Reinforced with epoxy coated steel wire on both sides of cloth Washable - lukewarm water & mild detergent Temperature (continuous): minimum -15°F (-26°C) maximum 385°F (196°C) Nomex Cloth Elements "MXD" Series 99+% removal efficiency to 5 μm Nomenclature: i.e. 345MXD Food grade silicone adhesive Reinforced with stainless steel wire mesh on both sides of cloth and stainless steel endcaps Washable - lukewarm water & mild detergent Temperature (continuous): minimum -15°F (-26°C) maximum 385°F (196°C)

Inquires Encouraged Contact your local Solberg Representative for your specific application Solberg Manufacturing Inc. – Discover the Possibilities pg. 8

Solberg-Replacement Elements-EL160  

TABLE OF CONTENTS Visit Solberg on the Web: WWW.SOLBERGMFG.COM R E P L A C E M E N T E L E M E N T S Bulletin EL-160 ®

Read more
Read more
Similar to
Popular now
Just for you