Page 1

TECHNICAL SPECIFICATIONS

ID6

Product Group: System Type:

iDESIGN Installation Group 2-Way, 1" x 6.5", 90°x90°

FEATURES & ADVANCES • Compact Form Factor • 8 Reinforced 1/4-20 UNC threaded mounting points • Omni-mount location on rear of enclosure • U-Bracket factory hardware available • Weather Resistant Construction

PRODUCT DESCRIPTION The ID6 is a 2-way full range loudspeaker designed for permanent installations. This low profile, high output, and weather resistant loudspeaker features a direct radiating 6.5” low frequency driver, a 1.0” compression driver, and a passive crossover. The ID6 is ideally suited for under balcony installation, distributed systems, or other applications which require high output professional quality sound reproduction.

MOUNTING & RIGGING Mounting locations are distributed across 3 surfaces of the enclosure. An Omni-mount™ compatible location is available on the rear of the enclosure, while an additional 8 reinforced 1/4-20 UNC threaded locations are available for other mounting options. iDESIGN iDB™ Series U-bracket hardware is also available for single unit wall and ceiling mount installation.

CONSTRUCTION The enclosure is constructed of 12-ply void-free birch hardwood plywood and is coated with a weather and wear resistant ProCoat™ polyurea hybrid finish. All rigging components are weather protected with a heat cured epoxy powder coat finish. Components in the front of the enclosure are protected by a curved grill made from perforated steel that is coated with heat cured epoxy powder, and lined with acoustically transparent foam.

APPLICATIONS

AMPLIFICATION & PROCESSING One channel of discrete amplification and signal processing is required for this module. The preferred loudspeaker controller for all iDESIGN products is the McCauley M Series family of digital processing units. The System Design Group can help in creating a complete amplification and signal processing solution.

PERFORMANCE PARAMETERS System Type Frequency Response -10dB +/- 3dB

Sensitivity

90°x90°, 2-Way, Full Range 80Hz - 20kHz 90Hz - 18kHz

Passive

91dB @ 2.83V 1 m

Maximum SPL

(cont. / peak) 112dB / 118dB

Passive

Crossover Data Power Ratings

Passive - Program Passive - AES

2200Hz

@ 24dB per octave

200W @ 8Ω 100W @ 8Ω

• Houses of Worship • Performing Arts Centers • Dance Clubs • Theme Parks

• Auditoriums • Theatrical Sound Design • Restaurants • Sports Facilities

PHYSICAL PROPERTIES Weight Dimensions inches centimeters

Enclosure Material Suspension

Finish

21lbs / 9.5kgs 15.5 h x 8.25 w x 9.0 d 39.5 h x 21.0 w x 22.9 d 5/8” 12 ply Birch Laminate (8) 1/4-20 reinforced hang points (1) Omni-Mounttm compatible mounting locations (3) Horizontal U-Bracket mounting locations Procoat™ Polyurea-Hybrid Weatherproofing (Black is standard, White and Custom Colors Available)

Transducers

(1) 6.5” LF Transducer (1) 1.4" Diaphragm, 1" Exit Compression Driver

Connectors

Two-Terminal 5.08mm Phoenix Connector

Compatible Array Frames

(for building clusters)

Compatible U-Brackets (for deploying individually)

N/A IDB.6-HU

McCauley Sound Inc. - 16607 Meridian Avenue East - Puyallup, WA 98375 - U.S.A Phone: 1.877.McCauley - Fax: 253.841.3050 - http://www.mccauleysound.com


DIMENSIONAL ILLUSTRATIONS

15.00°

546.10 R21.50 33.78 1.33

101.60 4.00

394.68 15.54 180.34 7.10

209.55 8.25 66.68 2.63

124.46 4.90 107.95 4.25

46.48 1.83

50.80 2.00

33.78 1.33

228.60 9.00 114.30 4.50

ARCHITECTS AND ENGINEERS SPECIFICATIONS The two-way full range loudspeaker system shall incorporate a 1.25" (32 mm) voice coil, 6.5" (165 mm) diameter LF transducer and a 1" (25 mm) exit, 1.4" (35 mm) diaphragm compression driver HF transducer. The LF driver shall be mounted in an optimally vented enclosure tuned for maximum low frequency response. The high frequency transducer shall be mounted to a true constant directivity acoustic horn with a nominal horizontal coverage pattern of 90°. The vertical coverage pattern of the horn shall be 90° and shall also provide true constant directivity. The systems frequency response shall vary no more than ±3 dB from 90 Hz to 18 kHz measured on axis. The low frequency transducer shall produce a Sound Pressure Level (SPL) of 91 dB SPL at a distance of 1 meter with an electrical power input of 1 Watt, and shall be capable of producing a maximum peak output of 112 dB SPL on axis at 1 meter. The high frequency transducer shall produce an acoustic Sound Pressure Level (SPL) of 108 dB SPL on axis at 1 meter with an electrical power input of 1 Watt, and shall be capable of producing a peak output of 125 dB SPL on axis at 1 meter. The low frequency transducer shall handle 100 Watts of amplifier power (per ref Standard AES2-1984-r2003) and shall have a nominal impedance of 8 Ohms. The high frequency transducer shall handle 30 Watts of amplifier power (per AES ref Standard AES2-1984-r2003) and shall have a nominal impedance of 16 Ohms. The loudspeaker enclosure shall have a maximum weight of 21 lbs. (9.5 kg) and shall measure 8.25" (209.6 mm) wide at front, 6.11" (155.2 mm) in width at rear, 15.5" (395 mm) in height, and 9.0"(229 mm) in depth. The enclosure sides shall taper at 7.5° from a maximum frontal width, narrowing to the rear. The structure of the enclosure shall be constructed of 12-ply void-free birch hardwood plywood and shall have a weather and wear resistant ProCoat(tm) polyurea hybrid finish. Components in the front of the enclosure are to be protected by a curved grill made from perforated steel that is coated with heat cured epoxy powder, and lined with acoustically transparent foam. The input connector shall be one, two-terminal 5.08mm Phoenix connector. A cable end connector shall be supplied that will accept two 12 AWG wires for each terminal. A total of eight 1/4"-20 UNC threaded mounting/suspension points (three on top, three on bottom, and two on rear) shall be provided. One third-party compatible mounting location shall be provided on the rear of the enclosure. The 2-way full range loudspeaker shall be the McCauley Sound model iD6.

McCauley Sound Inc. - 16607 Meridian Avenue East - Puyallup, WA 98375 - U.S.A Phone: 1.877.McCauley - Fax: 253.841.3050 - http://www.mccauleysound.com

iD6_Cutsheet  

http://www.mccauleysound.com/files/iD6_Cutsheet.pdf

Read more
Read more
Similar to
Popular now
Just for you