Page 1

1


S_Dial WORK Basic & Advanced Digital indicators

Swiss Made

High quality and very robust digital indicators range coolants and lubricants protected. Sleeping mode after 20 minutes with automatic wake-up by moving the spindle. Position memorized in sleeping mode (Absolute system*). Function assigned to the button(s), programmable by PC.

805.5201

- Indicators Digital มีความแข็งแรงทนทานและมีคุณภาพสูง สามารถ ป้ องกันสารหล่อเย็นและน�้ำมันหล่อลื่นได้ - มีโหมดพักหน้าจอหลังจาก 20 นาที จะเปิ ดเองเมื่อเลื่อนแกนวัด - จ�ำต�ำแหน่งสุ ดท้ายในโหมดหลับหน้าจอ (เรี ยกว่าระบบ Absolute) - ฟั งก์ชนั่ สามารถก�ำหนดค่าได้ที่ปุ่มกด หรื อสามารถตั้งค่าได้จาก ซอฟต์แวร์ในคอมพิวเตอร์

Order number

Model

Range (mm)

Resolution (mm)

Max error (μm)

Price (THB)

Promotion (THB)

805.5201

Advanced

12.5

0.01

10

17,400.-

11,900.-

805.5301

Advanced

12.5

0.001

3

22,000.-

14,900.-

805.5401

Advanced

25

0.01

10

19,800.-

13,400.-

805.5501

Advanced

25

0.001

4

24,000.-

16,000.-

805.5601

Advanced

50

0.01

20

33,000.-

22,000.-

805.5621

Advanced

50

0.001

5

36,500.-

24,900.-

805.5641

Advanced

100

0.01

20

48,000.-

33,000.-

805.5661

Advanced

100

0.001

6

52,000.-

35,500.-

805.5671

Advanced

150

0.01

20

62,500.-

42,500.-

805.5681

Advanced

150

0.001

10

70,000.-

47,500.-

THE REFERENCE

EASY TO USE

BEST ACCURACY ON THE MARKET.

BEST RATIO QUALITY/PRICE ON THE MARKET.

ใช้งานง่าย

คุ้มค่าที่สุดเมื่อเทียบกับคุณภาพ ต่อราคา ในท้องตลาด

926.6721 THB 3,290.–

805.1301

Order number

Model

Range (mm)

Resolution (mm)

Max error (μm)

Price (THB)

Promotion (THB)

805.1201

Basic

12.5

0.01

10

14,700.-

9,900.-

805.1301

Basic

12.5

0.001

4

17,000.-

11,500.-

805.1401

Basic

25

0.01

10

16,000.-

10,900.-

805.1501

Basic

25

0.001

5

18,500.-

12,500.-

805.1601

Basic

50

0.01

20

29,000.-

19,900.-

805.1621

Basic

50

0.001

7

31,500.-

21,900.-

*instruments equipped with a Smart Inductive Sensor with an extremely low power sleeping mode.

*เครื่องมือมาพร้อมกับเซ็นเซอร์ Smart Inductive กินไฟน้อยแม้ในโหมดพักหน้าจอ 2


TRADE IN Swiss Made

Old Vernier-Caliper for New One เวอร์เนียร์รุ่นเก่า (ทุกยีห่ อ้ ) ใช้เป็ นส่ วนลดในการแลกซื้อรุ่ นใหม่

+

THB 2,490.-

=

(5,800.-) without old Vernier Caliper ในกรณี ที่ไม่มีสินค้ามาเปลี่ยน (2,990.-)

910.0507 Measuring Range : 150 mm Max. Error G : 20 μm Depth rod : Ø 1.5 mm

Old Dial Gauge for New One Available in 2 models: 1. Model 805.1301.EX, addition of 7,990. 2. Model 805.5301.EX, addition of 11,400.ไดอัลเกจรุ่ นเก่า (ทุกยีห่ อ้ ) ใช้เป็ นส่ วนลดในการแลกซื้อรุ่ นใหม่ มีให้เลือก 2 แบบ 1. รุ่ น 805.1301.EX แลกซื้อได้ในราคา 7,990. 2. รุ่ น 805.5301.EX แลกซื้อได้ในราคา 11,400.-

+

THB 7,990.-

= 805.1301.EX

+

THB 11,400.-

= 805.5301.EX

All old instruments for donation สิ นค้าทุกตัวที่นำ� มาแลกซื้อจะน�ำไปมอบให้สถานศึกษา 3


DIGI ARIS

DIGI R/L BRIDGE

Digital sliding gauge for measurement segger grooves

Digital depth caliper

Italy Made

Optional accessories

PRA(included)

Article

Range

Resolution

Accuracy

PRB

PRC

PRD

PRE

PRF

PRA-W

Price (THB)

Article

Range

Resolution

Accuracy

Price (THB)

DIGI ARIS 155/47

150

0.01

0.02

12,900.-

DIGi R/L BRIDGE 150

150

0.01

0.02

16,900.-

DIGI ARIS 200/55

200

0.01

0.02

15,900.-

DIGi R/L BRIDGE 200

200

0.01

0.02

18,900.-

DIGI ARIS 250/55

250

0.01

0.03

19,500.-

DIGi R/L BRIDGE 250

250

0.01

0.03

20,900.-

DIGi R/L BRIDGE 300

300

0.01

0.03

22,900.-

DIGi R/L BRIDGE 400

400

0.01

0.03

24,900.-

DIGi R/L BRIDGE 500

500

0.01

0.03

28,900.-

DIGi R/L BRIDGE 600

600

0.01

0.03

31,900.-

DIGI MUSTA Digital caliper for measure of lands inside bores

CARBO CIRCE Article

Ext. Range

Int. Range

Resolution

Accuracy

Price (THB)

DIGI MUSTA 200

0 - 200

2 - 200

0.01

0.02

27,500.-

DIGI POSEIDONE Digital caliper for spacing and sections on different planer

Article

Range

Resolution

Accuracy

Digital multifunzional caliper double sliding gauge A

Article

A (Range)

Resolution

Price (THB)

CARBO CIRCE 400 IP67

610

0.1

47,900.-

CARBO CIRCE 600 IP67

810

0.1

53,000.-

CARBO CIRCE 800 IP67

1010

0.1

62,000.-

CARBO CIRCE 1000 IP67

1210

0.1

72,500.-

CARBO CIRCE 1500

1800

0.1

99,000.-

CARBO CIRCE 2000

2300

0.1

125,000.-

Price (THB)

CARBO CIRCE 2500

2800

0.1

159,900.-

DIGI POSEODPME 150

150

0.01

0.02

18,900.-

CARBO CIRCE 3000

3300

0.1

200,000.-

DIGI POSEODPME 200

200

0.01

0.02

22,000.-

CARBO CIRCE 3500

3800

0.1

249,000.-

DIGI RAV

ERACLE H IP67

Digital sliding gauge for conic measurement

Sliding gauge in carbon fiber, jaws in hardened steel

Article

Ext.range

Int.range

Resolution

Accuracy

Price (THB)

DIGI RAV 150

0-150

10-150

0.01

0.03

24,900.-

DIGI ATLANTE Digital caliper for internal keys

Article

Range

Resolution

Accuracy

Price (THB)

DIGI ATLANTE 150

150

0.01

0.02

21,000.-

Resolution 0.01 mm Article

Range

Accuracy

Kg

Price (THB)

ERACLE H IP67 500/125

500

0.03

1.100

49,900.-

ERACLE H IP67 500/150

500

0.03

1.120

55,900.-

ERACLE H IP67 600/125

600

0.03

1.160

56,900.-

ERACLE H IP67 600/150

600

0.03

1.180

59,900.-

ERACLE H IP67 800/125

800

0.04

1.280

61,900.-

ERACLE H IP67 800/150

800

0.04

1.300

62,900.-

ERACLE H IP67 1000/125

1000

0.04

1.400

64,900.-

ERACLE H IP67 1000/150

1000

0.04

1.420

66,900.-

DIGI PLATON Instrument for measurement with spring system

DIGI AFRODITE D Digital caliper for tooth

Resolution 0.01 mm

4

Article

Range

Repetibility

Kg

DIGI PLATON I/E 400

400

0.03

1.400

Price (THB) 79,900.-

DIGI PLATON I/E 600

600

0.03

1.900

89,900.-

Article

Range

Resolution

Accuracy

Price (THB)

DIGI PLATON I/E 800

800

0.04

2.400

106,000.-

DIGI AFRODITE D 150

150

0.01

0.02

19,900.-

DIGI PLATON I/E 1000

1000

0.04

3.400

115,000.-


DIGI ULISSE I/E

COPUN

Digital sliding gauge for internal/external grooves

Instrument for measuring the concentricity between tips

Italy Made

Article I

Range

Resolution

Accuracy

24-250

0.01

0.02

Price (THB) Article

Range

Ø Max

0.02

COPUN 550 OR

550

150

89,900.-

COPUN 1000 OR

1,000

150

159,000.-

COPUN 2000 OR

2,000

150

290,000.-

DIGI ULISSE I/E 250

25,900.E

0-210

0.01

I

42-400

0.01

0.03

E

0-320

0.01

0.03

DIGI ULISSE I/E 400

29,900.I

42-500

0.01

0.03

E

0-420

0.01

0.03

I

42-650

0.01

0.04

DIGI ULISSE I/E 500

36,900.-

DIGI ULISSE I/E 650

Price (THB)

SIMMY Concentricity gage system

49,900.E

0-570

0.01

0.04

APOLLO Micrometer

Article

Range

Prec.

Price (THB)

SIMMY

Ø 1.5 - Ø 50

0.002

89,900.-

SIMMY B

Ø 10 - Ø 100

0.002

119,900.-

Article

Range

Repetibility

Price (THB)

APOLLO 0-50

0-50

0.001

28,900.-

APOLLO 50-100

50-100

0.001

26,900.-

APOLLO 100-150

100-150

0.001

33,900.-

APOLLO 150-200

150-200

0.001

39,900.-

APOLLO 200-250

200-250

0.001

45,500.-

APOLLO 250-300

250-300

0.002

53,000.-

APOLLO 300-350

300-350

0.002

65,000.-

APOLLO 350-400

350-400

0.003

79,900.-

APOLLO 400-450

400-450

0.003

96,000.-

APOLLO 450-500

450-500

0.003

105,000.-

Article

Dimension

Range

Repeatability

APOLLO 500-600

500-600

0.005

130,000.-

PULSAR 180

255 X 150

0 - 200

0.001

79,900.-

APOLLO 600-700

600-700

0.005

146,000.-

PULSAR 330

406 X 180

0 - 330

0.001

119,000.-

APOLLO 700-800

700-800

0.005

159,000.-

PULSAR 180-45o

255 X 150

0 - 200

0.001

105,000.-

TRITONE

Measurement table (quick check) • Precise and safe measurements • Base in hardened stainless steel inox tempre • Interchangeable accessories • Internal and external measure • Accuracy: 1 micron rep. • I fixed and movable probes • Couple of rods Ø 10 • Dial gauge 0,01 • Provided couple of accessory Price (THB)

BANCOPUN Instrument for measuring between two rips

Ø 20

Multifunction base for checking linearity, balancing and cylindricity

PULSAR

Standard supplied:

C

• Plate TR-P • Support with fixed disk TR-R

B

• Support with movable disk TR-RM

Standard supplied: • Plate TR-P

• Movable support for dial gauge SP-F

• One guide fixed (CP-F) and one movable (CP-M)

A

• Dial gauge

• Movable support for dial gauge SP-F A

Article

A

Price (THB)

TRITONE D 300

540

129,000.-

TRITONE D 500

740

155,000.-

• Dial gauge

Article

A

B

C

Ø Max

BANCOPUN 300 CU - C/ROLLER BEARING BANCOPUN 500 CU - C/ROLLER BEARING

Price (THB)

300

540

75

150

65,000.-

500

740

75

150

79,900.-

5


Contour Measurement Germany Made MK-CMS-2.0 - basic version with T-slot plate Resolution in X-, Z- and T-axis :

0.05 µm

Measuring range Z:

275 mm

Measuring range X:

190 mm

Table load:

100 kg

Accuracy:

+/- (2 + L/50) µm

Straightness:

2 + L/50 µm (Option MK-TSA Price: 39,900.-)

Price: 799,900.-

MK-CMS-2.1 - with manual Y-table, MK-CMS-2.2 - with automatic Y-table MK-CMS-2.3 - with automatic Y-table and Top-Down module

MK-TSA

Measuring range (Y axis)

40 mm

Table load:

100 kg

2D Optical System for real time automatic measurement

Italy Made

MICROGENIUS TECHNICAL DATA

MICROGENIUS SMALL

MICROGENIUS

MICROGENIUS MAX

Measuring range

mm

50x37,4

83,8x62,9

230x192

Working distance

mm

159

279

500

Field depth

mm

51

145

498

Optical distortion*

mm

up to < 0,03%

Telecentric LED condeser or flat LED lighting

Yes

5 Mp camera

Yes

64 bit computer with monitor

Yes

Windows operating system

Profiel Projectors

mm

Weight

kg

Projection system Protractor screen with reticule for angular measurements with digital display, 1’ resolution

Price: 449,900.-

350V

Price: 449,900.-

550x600x1560

700x700x2400

45

80

130 HELIOS 350-H

HELIOS 350-V

axis

horizontal

vertical

Ø mm

350

350

Metal projector body with sliding darkening hood

Swivelling lamp-holder arm

□ •

Diascopic projection with halogen lamp 150 W 24 V and motor fan lamp cooling

Episcopic projection with two way fibre optics and motor fan lamp cooling

Automatic protection against over-heating

Automatic stand-by for lamps and digital display Model M-Touch

450x150 200 □ 150 100 +/-15° • 15

320x150 200 100 □ 100 □ • 10

Standard worktable: - Dimensions - Horizontal movement - Transverse movement - Vertical movement - Focussing movement - Helix, 1’ reading - Release system for fast horizontal travel - Allowed weight (approx)*

The BlueLEVEL, in combination with BlueMETER SIGMA, is extremely suitable for precision measurements of small angles. This includes flatness measurements on surface plates in particular, and the measuring of geometrical features on machines of all kinds. A BlueSYSTEM SIGMA, also called Engineer Set, normally consists of two BlueLEVEL measuring instruments and an indicating unit BlueMETER SIGMA. Sensitivity ความไวในการอ่าน [mm/m]

6

440x460x1280

MODEL

HELIOS 350-H & 350-V 350H

Yes

Dimensions

mm mm mm mm mm

kg

Swiss Made BlueLEVEL เมือ ่ ใช ้คูก ่ บ ั BlueMETER SIGMA จะเหมาะทีส ่ ด ุ ส�ำหรับการ วัดค่าความแม่นย�ำของมุมทีเ่ ล็กๆ โดยเฉพาะอย่างยิง่ การวัดความเรียบ ผิวของแผ่นราบ และการวัดทางเรขาคณิตของเครือ ่ งจักรต่างๆ เราเรียก ่ ว่า Engineer Set ซึง่ ประกอบด ้วยตัว ตัว BlueSYSTEM SIGMA อีกชือ BlueLEVEL 2 ตัว ส�ำหรับวัด และตัว BlueMETER SIGMA ส�ำหรับแสดง ค่า และส่งค่าไปยังซอฟต์แวร์ Range ช่วงการวัด [mm/m]

0.001

±20

0.005

±100


PosiTest LPD Low voltage Pinhole Detector Specifications:

Voltage : 9V ± 5%, 67.5V ± 5%, 67.5V ± 5%, 90V ± 5% Sensitivity : 90k ± 3%, 80k ± 3%, 90k ± 3%, 400k ± 3% Thickness Range : 0 - 500 μm (0-20 mils) Temperature Range : -10 -50o C (14 - 122o F) Battery Life : > 150 hrs (depending on battery type) IP Rating : Meets or exceeds IP65 Size: 27x6x5.5 cm without wand Weight: 180g without batteries

Features:

• Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. • Greatly reduces user effort and the risk of influencing the pulling process User adjustable pull rate, pull limit and hold time • Internal memory stores maximum pull-off pressure, rate of pull, test duration, dolly size, pass/fail, nature of fracture and user notes for 100,000 pulls in up to 1,000 batches • Impact and scratch resistant color touch screen with keypad for operation with or without gloves

PosiTector SST Soluble Salt Tester Features: • Intuitive step-by-step interface guides users through the Bresle Method • Onscreen timer to report test duration • Automatic calculation of surface density of salt • Conforms to international standards • Compatible with PosiSoft Software • Can be used as a conventional conductivity meter-ideal for non-metallic blast media • Long Form Certificate of Calibration Showing traceability to NIST included

U.S.A. Made

PosiTest AT-A Automatic Adhesion Tester

PosiTector SHD Shore Hardness Durometer

PosiTector 6000 Coating Thickness Gages for all metal substrates

Features:

• User-adjustable measurement time with onscreen countdown to conform to national and international standards • Internal memory, statistics and USB port • Certificate of Calibration showing traceability to NIST included • Auto Ignore mode disregards readings below 20 or above 90 per international standards • HiLo alarm audibly and visually alerts when measurements exceed user-specified limits • Includes test block to verify operation

PosiTector 6000 FNDS Probe for Duplex Coatings Features:

Features:

• Measures and displays the individual layer thicknesses of zinc and paint in a duplex coating system with a single reading • Ideal for measuring the three types of zinc used in duplex coating systems - hot-dip, electro and zinc spray metallizing (thermal spray zinc) • When taken out of duplex mode, the instrument can be used as a conventional ferrous/non-ferrous gage to measure the thickness of coatings on ferrous or non-ferrous metal substrates • Scan mode - Take continuous readings without lifting the probe (Advanced models only)

• Multiple Calibration adjustment options including 1 point, 2 point, known thickness, average zero • Selectable display languages • Hi Contrast backlit display for bright or dark environments • Flip display enables right-side-up viewing • Extended cables available (up to 75 m/250 ft) for remote measuring • Uses alkaline or rechargeable batteries (built-in charger)

DIGITAL Hardness Testers Ergotest DIGI Digi 25 R / Digi 25 RS Standdard - Automatic conversion of the values measured in the various hardness scales: Rockwell, Brinell, Knoop, Vickers as well as tensile strength according to either “Galileo conversion tables”, ISO 18265 or ASTM E140 standards - “Go-no go” function - Automatic test cycle with electronic process control - Load dwelling time 1-99s selectable by keyboard - Self diagnosis program - USB port - LAN connection - Load selection by knob Overall dimensions (approx) W*D*H : 230x615x930 mm Net weight : 150 kg

Italy Made MODEL

ERGOTEST DIGI 25 R

For standard Rockwell tests with loads

kgf

ERGOTEST DIGI 25 RS

150-100-60

For superficial Rockwell tests with loads

kgf

Non applicable

45-30-15

For Brinell indentations with loads*

kgf

250-187,5 100-62,5

100-30

For Vickers indentations with loads*

kgf

100-60

Maximum height of the workpiece

mm

295

Throat depth

mm

220

Automatic pre-load selection

kgf

Price

10 (Standard) 3 (Superficial)

10

339,900.-

349,900.-

Portable Hardness Testers - Computest SCX Working principle: Rockwell Loads: 5kgf (49N) Swiss Made Preload: 1,2kgf (11,8N) Standard scales: HRC (0-70) - HRB (0-120) - HB30 (80-700) - N/mm² (260-2300) Load application method: manual kg/mm² (27-235) - HV (35-1080) - DPTH (0-100) Output interfaces: RS232, USBmicro Selectable functions: scales, tolerances, calibration, test load, stats, language, display Storage: contarst, seq., RS232, USB, files, materials, partial average. up to 1000 values memorizable in 8 different files clock, auto off timer, prints Minimum measurable diameter: 2mm with stand N - 3mm with stand T - 35mm by hand

Price : 299,900.-

Optical Readers - e●Brio² Standard scales: Minimum measurable diameter: 0.7 - 5mm HB 30 HB 10 HB 5 HB 2.5 - Brinell loads: 3000- 1000-750-500-250-187.5-125-62.5-31.2-15.6 kgf Selectable functions: Brinell indentation readings, histogram of the tests, statistics, print Reading: out of the test report Automatic / Camera resolution 752 X 480 pixel / Reading resolution 0.001 mm Working area dimensions: base: 30 mm diameter

Price : 259,900.- (without PC)

Price : 299,900.- (with Tablet PC)

7


Brinell Hardness Tester

Digital Micro Hardness Tester

HBE-3000M

Hardness scale: HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2 Conversion Scale: HRA, HRB, HRC, HRD, HK, HBS, H15N, H30N, H45N, H15T, H30T, H45T Testing force: 10g-1kg Min. measuring unit: 0.01μm Hardness value range: 1-4000HV Total magnification: 100x, 400x Loading method: Automatically Data Output: Built-in Printer, RS-232 interface Price : HVD-1000MP 249,000.- (Manual Turret) Price : HVD-1000AP 289,000.- (Auto Turret)

Brinell scale: HBW2.5/62.5, HBW2.5/187.5, BW5/125, HBW5/750, HBW10/100, HBW10/250, HBW10/500, HBW10/1000, HBW10/1500, HBW10/3000 Testing force: 62.5kg-3000kg Min. measuring unit: 0.005mm Hardness range: 8-650HBW Hardness value read: Check table Total amplification: 20X Loading method: Automatically

Price : 169,000.-

Universal Testing Machine

Multi-funtion Hardness Tester

JVJ-50S/JVJ-50P

HBRVE-187.5 Rockwell scale: HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK, HRL, HRM, HRR Brinell scale: HBW2.5/31.25, HBW2.5/62.5, HBW5/62.5, HBW2.5/187.5 Vickers scale: HV30, HV60,HV100 Testing force: 30g-187.5kg Initial test force: 10Kg(98.0N) Resolution ratio: 0.5HR Loading method: Automatically Specimen depth allowed: 130mm

Price : 159,000.-

Free

-PC -Table

Max. Load: 5000N Load resolution: 1/10000 Load accuracy: ≤0.5% Load amplification: 7 segment auto switch Disp. resolution: 1/1000 Disp. accuracy: ≤0.5% Metal stretch meter resolution: 1/1000 Metal stretch meter accuracy: ≤0.5% Large deformation stretch meter accuracy: ±0.5mm Speed range: 1-500mm/min Effective space: 800mm Price : 350,000.Load cell: Imported Capacity section: 7 section Dynamical system: Servo motor

Automatic Cutting Machine

Polishing Machine Polishing disc diameter : Ф203mm Speed : 50-1000r/min Operating voltage: AC220V 50Hz Grinding/poshing disc number: 1, 2 Motor : 550W Dimention (mm) : 725x710x310

Price : MP-1B 69,900.- (1 DISC) Price : MP-2B 89,900.- (2 DISC)

Power supply : Three phase 380V 50Hz Cutting dis speed : 2100RPM Cutting disc spec. : Ф350x2.5x32 mm Max cutting diameter (mm) : Ф80, Ф100 Max moving Travel : 125 mm Max working table Travel : 275 mm Input : 2.5KW, 3.3KW Feed speed : 1-10 mm/min Working table size : 310x280 mm

Price : Q-80Z 199,900.Price : Q-100B 229,900.-

2D Video Measuring Machine IMS-3020

Free

Metal table sizes : 458x358mm Glass table size : 356x248mm X/Y-axis Travel : 300x200mm Z-axis Travel : 200mm X/Y/Z-axis Travel : 0.0005mm X/Y-axis Accuracy : ≤3+L/200(um) Dimension(WxDxH) : 838x667x1000mm Net Weight : 185Kg X/Y-axis Accuracy : ≤3+L/200(um) Repeatability : 2μm CCD Camera : High Resolution 700TV Color CCD Zoom lens : 6.5:1 High Resolution Detented Zoom Lens, Magnification:0.7X~4.5X;Video Magnification;26X~172X

Price : 399,000.-

2D Video Measuring Machine VMM-3020

Free

Metal Table Size(mm) : 506X356 Glass Table Size(mm) : 350X280 X,Y-axis Travel(mm) : 300X200 Z-axis Travel(mm) : 200 Resolution(mm) : 0.0005 X,Y-axis Accuracy(um) : ≤3+L/200 Net Weight(kg) : 200 Dimensions(mm) : 780x600x1060 Video System : 1/3“Color CCD Camera,0.7~4.5 Zoom Lens, Video Total Magnification:30X~230X,Object View:7~1.1mm, LED adjustable Light Source

Price : 355,000.-

1200oC Touch screen muffle furnace 3D CNC Vision Measurement Machine SXL-1200 Chamber size (D*W*H) : 300x200x200, 400x300x300 Furnace body : Double shell structure, with air cooling system, surface temperature < 50oC Display mode : Touch screen display Operation temperature : Max temperature 1200oC , continuous working temperature ≤ 1150oC Heating rate : ≤10oC/min (recommend), Max.: 30oC/min Temperature cooling rate : ≤10oC/min (>700oC) Executive standard : GB/T 1006.1-2004, GB/T 10067.4-2005

8

SPRATAN-3020

X,Y,Z measurement travel : 300x200x200mm Overall dimensions : 135x72x165 cm Machine weight : 280 kg Repeatability : 2μm Max table load : 30kg Resolution : 0.1μm X,Y,Z measurement precision : (2.5+L/200)μm Light source system : software controlled adjustable 6 ring 8 zone surface light and straight adjustable contour light Lens : High precision motorized Tele-centric auto-zoom lens & 0.5x,1.5x,2x attached lens

Price : 799,000.-


Ron StageMaster™ 6000 G4 Wireless Eilon Classic - RSM 6000 G4 EC Designed for quick installation and versatile use. R.F.: 2.4 GHz range – other ranges available.

U.S.A. Made

R.F. transmission range: Up to 450’/150m in normal operation conditions (outdoors, line of sight). Longer transmission ranges are optional. Safety Factor: 5:1 and 10:1 standard. Higher safety factors are available. Safety features: Fatigue rated load cells that can withstand successive load cycles for long periods of time without the risk of failure or damage to the steel. Proof load: 200%. Accuracy: ± 0.1% of full range. Capacities: 2t standard capacity with range of capacities from 0.25t to 5t and higher (up to 300t). Display: Using a laptop or PC, the operator can monitor and control the loads of up to 200 load cells per monitoring station simultaneously, having on one single screen all the relevant information derived from the load cells: Sum (group sum and total structure sum), Max, Tare, Zero, Group (LC), Overload detection, Stage-plan layout, Low battery indication etc. Functions: Sum, Max, Tare, Zero, Group (LC), Overload detection and alert (visual and audible), Low battery indication, Reports data base, User calibration, Group functions (Sum, Max, Zero, Tare, Overload and customized overload detection), Plan/layout archiving. Additional Features: Web server based, tablet and smart phone compatible. Units: Selectable units feature with the following choice of measurement readings: Tons, Kgs, Lbs. Load Cell Material: Made of high-strength, aerospace quality low alloy steel, polyurethane coated. Power: 4 x AA 1.5 Volt Alkaline disposable batteries rated 3Ah for each load cell. Batteries will function up to 5000 hours (optional 10,000 hours). Optional 110/220 VAC operation. Calibration: User calibration. Initial factory calibration, certified and fully traceable to NIST. Temperature Range: Load cell: -15°F to +175°F / -25°C to +80°C. Environmental: Weatherproof, Nema 4, IP 65. Higher sealing levels available.

Crane Scales

Dynamometer

Load Cells

Overload Detectors

With integral, removable or remote displays, With removable or remote displays, wireless With built-in amplifier Capacities: 0.5t – 300t With either one or two detection points wireless or with cable Capacities: 0.5t – 10t or with cable Capacities: 0.5t – 300t Capacities: 0.5t – 10t

Digital Ultrasonic Flaw Detector CTS-9009 / CTS-9009PLUS

Price : 299,900.-

Superior Features ● Max. sampling rate 240MHz; Measurement resolution 0.1mm. ● Featured with AWS D1.1/D1.5 and API 5UE evaluation standards. ● The gate magnifier function magnifies the echo area within the gate to the whole screen display. ● Ethernet communication: Achieving real-time communication with a PC and remote control. ● The convenient and useful probe echo frequency measure function enables the users to know the probe center frequency quickly, resulting in more precise flaw detection evaluation. ● Operating frequency range: 0.5~15MHz, highlighting advantages of high sensitivity and broadband. ● 20 ~2000Hz PRF with 10 steps adjustable: avoid reverberation signals during flaw detection. ● Measure crack height by edge peak echo method. ● RF (Radio Frequency) echo display: good to thin-wall material measurement, academic research or qualitative analysis. ● The AGC (auto gain control) function, together with peak echo and image freeze function, help quickly identify the flaw highest echo, enabling efficient flaw detection. ● The DAC curve works with echo compare function, making echo quantification of different distances and amplitudes more convenient. ● Three different color schemes can meet the requirements of different application environments and habits. ● Up to 500 sets of curve and waveform can be saved for various workpieces and flaw detection standards. ● Support up to 9 kinds of language. ● Thickness measurement function available.

Ultrasonic Thickness Gauges

Ultrasonic Thickness Gauges

CTS-49

CTS-30C

Price : 99,900.-

Features: ● Measurement range: 0.5~600 mm. ● Compact size and weight only 0.6Kg Inc Battery. ● 5” High resolution color TFT-LCD monitor with high-brightness LED backlight (visible in sunshine), 800x480 pixels. ● Auto search function can automatically adjust the display range and the gain based on the detected echo. ● Standard (R-B1 transmission pulse to the first echo), through coating measurement (B1-B2 or Bm-Bn) and coating measurement fuctions available. ● A scan and B scan fuctions available. ● Up to 6 language including English / French / Germany / Spanish / Portugues / Chinese for selection. with Probe TGM 5-10L ● Multi-probes compatible for selection

Specifications: Display Resolution: 0.01/0.1 mm Material Velocity Range: 1000-9999 m/s Gain: low/standard/high, Pulser: Negative square Measurement Function: Standard/ minimum/ average/ difference/ fast scan Interface Mode: Standard measurement/ Simple menu setup interface Data Transmission: Data can be transferred to a PC via the miniUSB port Display Screen: 2.2-inch Mono LCD (with backlight) 128x64 pixels Storage: Up to 5000 sets of measurement data (measurement value and velocity) and 100 sets of parameter data (measurement value and system setup) Price : 59,900.IP Code: IP54

9


Table Top Electromechanical Materials Testing Machines Series LFM-Top up to 125 kN

Single-Column Electromechanical Materials Testing Machines Series LFM-L up to 25 kN The LFM-L Single-Column Systems are designed for testing of a variety of different materials, specimens or components where load requirements are low. This series is compatible with a wide range of accessories, grips and fixtures covering all relevant applications as testing of rubber, plastics, foils, films, textiles, adhesives, paper, foods, foams, timber, wires or other metallic or non-metallic specimens as well medical, electronic and other components.

Servohydraulic Universal Testing Machines Series TTM up to 5000 kN

High Temperature Testing under Vacuum

Swiss Made

Designed for materials and components testing the LFM-TOP Dual Column Tabletop Systems can be used over a range of force applications up to 125 kN. The LFM-TOP test systems are supplied with two backlash-free ball screws and additional two guidance columns providing suitable load frame stiffness as required for table top design. The mobile crosshead is driven by a state-of-the-art brushless / maintenance free AC Servomotor providing high positioning accuracy and repeatability, faster starts and stops, best control, and highest accuracy at extremely low noise level. The LFM-TOP series is modular constructed and can be configured with a variety of grips and fixtures, extensometers, environmental chambers, high temperature furnaces, different software packages and other accessories to suite your specific testing needs.

Innovative materials are in demand in many sectors of industries and technology. In the field of Aerospace, Energy and others new high-temperature materials are demanded to increase efficiency or extending the life of turbines, reactors etc. w+b offers high-temperature test systems for R&D and quality control to test high-temperature alloys, ceramics and other materials. This includes beside of testing under air also Test Systems performing different mechanical tests under vacuum or Inert Gas

The TTM® Testing Machines are rugged, durable and highly reliable designed Systems, are often the best choice for high capacity and highstrength materials testing. These workhorses are available as 2-column construction in the load range up to 1000 kN and 4-column design for force capacities ranging from 600 kN to 5000 kN. The TTM® series perform digital, servo-controlled closed loop hydraulic actuation controls in load, strain or displacement mode. These Test Systems are compatible with a wide range of grips and fixtures suitable for testing metals or casted sheets, bars or tubes, fasteners, wires, cables or chains. The TTM ® series features a long piston stroke for universal testing without changing the crosshead adjustment. The actuator is integrated on upper crosshead providing very ergonomically and unchanged height of the lower grip.

Mulitipurpose Dynamic & Fatigue Testing Systems LFV-L up to 50 kN

Charpy Impact Testers Series PH VERSION CHV up to 750 Joules w+b offers a comprehensive range of impact testers. Available are table top or floor-standing units complying with ISO 148-1, EN 10045-2 & ASTM E23 suitable for impact bending tests to CHARPY, IZOD, Impact Tensile Tensile Tests or & Brugger tests. The PH VERSION CHV Series of Impact Testing machines represents a sophisticated series of modular Impact Testers expandable with instrumented strain gauged striking edge with high speed data acquisition system or the patented laser opto-electronic-measuring-system for deflection (bending) and crack opening measurement for the experimental determination of the intensity of stress, KID/KIC-factor.

The LFV-L servohydraulic Table Top series are ideal for testing of Biomedical or Advanced Materials. This series is well suited for monotonic (static) tension, compression, bend, shear, fracture toughness and durability & fatigue tests including fatigue crack growth testing. The fatigue rated actuator is double acting and double ended with equal area and features Hydrostatic 4-Pocket Bearings for the best friction free static and dynamic performance with virtually service-free operation. The actuator is conveniently mounted in the upper crosshead for easy table mounting. The load cell is mounted on the piston rod end but also can be mounted on the lower base platen.

Torsion Testing Machines Torsion Tests can be carried out on most materials, using standards specimens, to determine mechanical properties such as modulus of elasticity in shear, yield shear strength, ultimate shear strength, modulus of rupture in shear, and ductility. Further tests can also be carried out on full-size parts (shafts, axles, etc.) and structures (beams , frames etc.) to determine their response to torsional loading. w+b offer a full range of torsion testing machines from tabletop electromechanical standard machine (LFM-T Series) to servohydraulic fatigue rated systems (LFV-T Series).

Biaxial Testing Systems During service components are often subjected to multiaxial stresses. For biaxial testing of materials, particularly composites, metals, textiles, biomaterials or plastic under a wide range of biaxial stress states, typically a cruciform specimen in conjunction with a testing machine capable of bearing independently controlled loading on two orthogonal axes is used. The cruciform specimen avoids stress concentrations and provide a uniformly stressed test section. Load application for the cruciform can be accomplished in a robust frame supplied with a separately drives (either electromechanical or servohydraulic) and separately load cell to check for off-axis or unbalanced loading. Depending on test conditions w+b offers Biaxial Testing Systems in different configurations adapted to multiaxial testing in creep, static strength, fatigue or high speed mode in different force ranges. Available are systems with Electromechanical Drives or Servohydraulic Actuators.

Systems and Components for Structural Testing w+b offers an extensive range of components and complete systems for testing of sturctures and components. Our product range includes components and complete systems for Civil, Structural, Architectural, Aircraft, Spacecraft, Automotive, Railway, Shipbuilding, Energie and other industries. Main Components includes portal frames & rigs, wide range of axial or rotary actuators with testing joints, compression platen or other connecting parts, servovalves with single to multi servovalve blocks, hydaulic power supply with related hard-line installation and cooling systems, hydraulic service mainfolds (HSM’s) and other functional blocks, multi-channel ultra-high-speed digital control system and related flexible application software.

10


9311 DIGIFORCE® X/Y monitoring

For monitoring press-fit, joining, rivet and caulking operations ±10V

DMS

Piezo Poti

FEATURES: - Flexible Fieldbus integration by PROFIBUS, PROFINET or EtherNet/IP - Automatic sensor recognition from burster TEDS - 3.5» colour touchscreen display - 16 measurement programs - Rapid data logging on USB flash drive - New evaluation elements (trapezoid window and thresholds) - User-configurable I/Os and 6 real-time switching signals - Smart autosetup for evaluation elements - Handles worker, admin and identification data - Up to 50 most recent measurements available for display and analysis - Records and evaluates a forward and return curve - Live sensor values provided at the Fieldbus interface - Synchronous logging of measurement data using DigiControl PC software for multichannel applications

8611 Precision Torque Sensor Non-contact transmission for rotating applications Optional measurement of angle and speed FEATURES: - Measuring range 0 ... ± 0,02 Nm to 0 ... ± 1000 Nm - Low linearity deviation of ≤ ± 0.05 % F.S. - Intelligent operating state indicator - 16 bit D/A- converter including digital adjustment - Output signal 0 ... ±10 V (optional 0 ... ± 5 V) - Angle measurement with 2000 increments / 0.045° (option) - Speed measurement to 25 000 min-1 (option) - High performant software (option USB) including mechanical power computation, multichannel operation, freely editable mathematical auxiliary channel - Excellent price-performance ratio - From 500 Nm 4 x keyway (optionally in other measuring ranges possible)

7281 Mobile High-Precision Calibrator and Testing Device For mechanical and electrical measurements Device test, strain gauge simulator, sensor test, reference measurement chain FEATURES: - Supported sensors: Strain gauge/normalized signal ± 5V, ± 10 V, potentiometric sensors - Device test: Strain gauge simulator up to ± 50 mV/V - Easy adjustment through burster TEDS - Excellent linearity with non-linearity < ± 0.001 % - Storage of up to 16 measurement programs - Data logger for up to 30.000 measurements - Factory calibration certificate and / or German accredited DKD / DakkS calibration certificate optionally available for the instrument / entire measurement chain

Germany Made

2304 High-Precision Automatic Inspection and Test Unit for Electrical Resistance Testing RESISTOMAT® - Automatic choice of measuring ranges from 200 μΩ to 20 kΩ - Measuring error ≤ 0,01 % - Resolution up to 1 nΩ - Standard interfaces IEEE488, RS232, RS485, USB (option)

FEATURES: - Automatic inspection and test unit - Highest measuring accuracy

- Inductive probes - Menu control

9206 USB Sensor Interface

For strain gauge, potentiometric, DC/DC and Pt100 sensors

±10V

Pt100

Poti

Plug & measure» design, simple connection via PC USB port, resolution up to 24 bit, high speed measurement of up to 1200 meas./second, several interfaces can be networked FEATURES: - Inexpensive «Plug & Measure» design - Simple connection via PC USB port - 24 bit resolution - High-speed measurement of up to 1200 readings/sec. - Convenient configuration and analysis software DigiVision - Pt100 as option - LabVIEW and DLL drivers free of charge - Integration in customer-owned software - 6 wire technology for the highest precision

Toggle presses, Impact presses, Pneumatic presses, Rack and Pinion presses

Germany Made

11


eddyliner® S Digital eddy current test instrument for one channel nondestructive testing of metal components, mass produced parts and semi-finished products according to the Preventive Multi-Frequency Technology (PMFT). Testing for material properties such as hardness, case depth, structure, tensile strength, heat treatment or alloy. • Tolerance zones When recording material data the eddyliner automatically generates elliptical tolerance zones for a reliable test. A tolerance zone editor is integrated for special applications enabling the skilled user to freely define the zones in rectangular or elliptical form. • Harmonics analysis In addition to the eight fundamental test frequencies, two harmonics (2nd to 9th harmonic arbitrary) for each test frequency can be turned on and simultaneously evaluated without increasing the test time. • Histogram The ibg multi-coloured histogram displays the test results of all reference data, the last 100 bad parts and up to 1,000 good parts at a glance, and can be evaluated later. An essential function when reference parts are first recorded and afterwards crosschecked in the laboratory. Questionable NG parts, later found to be good, can be added to the reference parts with one keystroke. • Display of results Test results are shown as bargraph, single ellipse or multiple ellipses, selectable. • Coils A multitude of encircling coils up to a diameter of 500 mm as well as structure test probes are available for standard applications. Customised coils (i.e. ID coils and rectangular coils) for special applications are designed and manufactured in-house. Test coils may be connected either as ibg-recommended compensating pair of coils or as self-compensating single-coil. Monitoring of coil-cable failure as well as a 50/60 Hz noise suppression can be activated. • Activating test Start of test can be manually at touch screen, via PLC or optional start button. There is an autostart function that detects the part in the test coil and activates testing immediately or after an adjustable delay time.

Germany Made • Test speed High-speed testing within milliseconds. Using eight test frequencies, a cycle rate up to seven parts per second with encircling coils and 25 parts with probes can be realised with standard settings. • Part type 100 part types with all settings and reference data can be stored in the device memory and switched over manually or via PLC for automated processes. • Data storage & transfer Test results, part types and device settings are stored internally on a robust flash memory and can be exported via an USB stick or Ethernet connection. A ring buffer logfile records all actions and allows fast debugging for service purpose. • Automation without PLC Direct control of sorting devices, paint marking systems or indicating lamps is possible with the integrated 24 Vdc (2.5 amps) power supply, providing a low-cost solution for small automated systems without an additional PLC • Remote control The eddyliner is remotely operable by every network computer via VNC viewer software. • Access protection The instrument provides a multilevel access authorisation concept that operates by pin code. • Help function The user always has access to a context-sensitive help function on the device screen which often renders a look into the manual unnecessary. • Languages Included are: German, English, Spanish, French, Czech, Chinese, Hungary, Italian, Japanese, Korean and Russian. Other languages as option. • Screen Tough 10.2” TFT touch screen, colour display, resolution 1,024 x 768 pixel, operable with gloves.

eddyliner® C Digital eddy current test instrument for one channel nondestructive testing of metal components, including mass produced parts and semi-finished products for cracks, pores and grinder burn according to the Preventive Multi-Filter Technology (PMFT). • Probes A variety of crack detection probes are available with different scan width, sensitivity and design. Customised models for special applications are designed and manufactured in house. Our compact and precision rotating heads eddyscan H and eddyscan F, operated with our eddyliner, can be the solution for cycle time optimised crack tests. Monitoring of probe cable break guarantees maximum reliability for continuous operation. • Lift-off compensation Eccentricity of a workpiece can be offset electronically thanks to lift-off compensation. This function requires special lift-off compensation probes. • Histogram The ibg multi-coloured histogram displays the test results of all reference data, the latest 100 bad parts and up to 1,000 good parts at a glance. They can be evaluated later, an essential function when reference parts are first recorded and afterwards crosschecked in the laboratory. If it turns out that some assumed NG parts need to be added to the reference parts it is just a matter of one keystroke. • Suspend The suspend function enables areas on components such as holes not to be tested. • Part types 50 part types with all settings and reference data can be stored in the device memory and switched manually or via PLC for automated processes. • Displays Test results are shown as bargraph, xydiagram with tolerance zones, x(t) and y(t) or three-dimensional C-scan, selectable. The C-scan (or cascade diagram) provides a plannar display of a cylindrical surface to enable visualisation of defect position and length.

Vat 7% Excluded. Images may differ from reality. Change without prior notice.

• Frequency range The carrier frequency is selectable within a range of 3 kHz and 10 MHz in 21 steps. The filter frequencies of the 30 band pass filters are spread in the range 6 Hz - 5 kHz. • Data storage Test results, part types and device settings are stored internally on a robust flash memory and externally on an USB stick. Test results may additionally be logged via Ethernet. A ring buffer logfile records all actions and allows fast debugging for service purposes. • Activating test Start of test manually at the touch screen, via PLC or an optional start button. • Automation without PLC Direct control of sorting devices, paint marking systems or indicating lamps is possible with the integrated 24 Vdc (2.5 amps) power supply, providing a low cost solution for small automated systems without an additional PLC. • Remote control The eddyliner is remotely operable by every network computer via VNC viewer software. • Access protection The instrument provides a multilevel access authorisation concept that operates by pin code. • Help function The user always has access to a context sensitive help function on the device screen which often renders a look into the manual unnecessary. • Languages Included are: German, English, Spanish, French, Czech, Chinese, Hungary, Italian, Japanese, Korean and Russian. Other languages as option. • Screen Tough 10.2” TFT touch screen, colour display, resolution 1,024 x 768 pixel, operable with gloves.

Head Office

Branch office Amata

Branch office Sriracha

261 Soi On-Nuch 17 yak 16, Sukhumvit 77 Rd., Suanluang Bangkok 10250 Thailand Tel: +66 (0) 2 717 7199 Fax: +66 (0) 2 300 2272 E-mail: sales@maxvalue.co.th Web: www.maxvalu.co.th

88/25-26 M.8 Soi Bankao 12 T. Bangnang A. Phanthong, Chonburi 20160 Thailand Mobile : +66 62 842 8181

271/21 Moo 8, Bowin, Sriracha, Chonburi 20230 Thailand Tel : +66 38 345 755-6 Fax : +66 38 345 757

Catalogue Promotion 2016-2017  
Read more
Read more
Similar to
Popular now
Just for you