__MAIN_TEXT__
feature-image

Page 1

Hacking devices – Trimbot


Print

scan


X-axis calibrated with light sensor to measure Maximum and minimum light values ,where min is Near center and max is at far end of axis

Dc motor

Axis of Revolution calibrated with a timer that Can be from seconds to days , usually it will be 12 hours to measure light with a full day.

Dc motor

Z-axis is calibrated with both dc motors and does 1tick every move to print a mark within that space To highlight the time and the amount of light.

servo motor


Printer

Light meter


Urban scenario

In a large scale scenario , the device can be centered in the site where It can scan shadows from surrounding buildings ,thus calculating the Maximum light exposure .afterwards the device can print the floor to Insure perfect light condition I facades , it can be programmed to print When there’s less exposure and skip when there is light to place windows

Profile for Marko Vukovic

Hacking devices - Trimbot  

Workshop in IAAC, Barcelona Digital tectonics studio, MAA 2010/2011.

Hacking devices - Trimbot  

Workshop in IAAC, Barcelona Digital tectonics studio, MAA 2010/2011.

Advertisement

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded