Page 1

For more details visit www.marinemegastore.com or call 0871 8732404

Installation Solutions for Marine Electronics™

Scanpods

Powerboat Products

Sailboat Products

Accessories

Installation Solutions for Marine Electronics™

Scanstrut products are available worldwide, for full details contact our head office or go to: www.scanstrut.com

All Scanstrut products are supplied with a standard worldwide warranty. Refer to www.scanstrut.com for details.

All design is worldwide copyright of Scanstrut Limited.

Scanstrut and PowerTower are registered trade marks of Scanstrut Ltd. All other product names are trademarks of their respective owners. Catalogue correct at time of press. Liability for any difference between product and catalogue cannot be accepted by Scanstrut Ltd. Yacht and Powerboat photography by kind permission of Hallberg-Rassy; Fairline Boats; Sealine; Najad; Grady-White Boats; Robin Price, Fujifilm. All other photography by Scanstrut Ltd and Chris Knox Photography.

Designed and produced by zerofour www.zerofour.biz

Scanstrut products are designed with care for their specific function listed in our brochure and on our website. Any Scanstrut product should not be used in an application for which it is not intended.

Head Office Scanstrut Limited 1 Malt Mill, Totnes, Devon, UK TQ9 5NH Tel: +44(0) 1803 863800 Fax: +44(0) 1803 862223 e-mail: mail@scanstrut.com website: www.scanstrut.com

For more details visit www.marinemegastore.com or call 0871 8732404

Product Guide 2009

sail&power

1


For more details visit www.marinemegastore.com or call 0871 8732404

Welcome

Existing product ranges and new products

At Scanstrut, our commitment to you is clear: to provide a choice of outstanding mounting solutions for the latest marine electronics, supported by our industry leading customer service promise.

New Products Scanstrut is pleased to bring you several exciting new products.

With our extended worldwide dealer network, now including Scanstrut USA, wherever you purchase your marine electronics, you will also find a Scanstrut solution. Above all, we want to support you in making the preparation of your boat as simple as possible, so that you can enjoy every minute out on the water. Tom Reed. Managing Director.

Scanstrut HQ.

Scanpod

Powered Hinge System

Exciting NEW product range from Scanstrut – Mounting PODS for marine electronics. Scanpod is our new range of power and sailboat instrument mounts for marine electronics.

Powered Hinge System compatible with Dual PowerTower®. Lowers satcom & radar mount to reduce height for road transport, when passing under bridges and to aid storage out of season.

Scanstrut USA.

Visit www.scanstrut.com/global-network for our worldwide distributor contacts.

Website Easy Product Finder Section Intuitive product selection tool with quick links to antenna compatibility. Latest models from all electronics brands listed with our recommended installation options.

scanstrut.com

Online Ordering Section for Scanstrut Distributors Place orders quickly and easily, access your customer profile, check delivery status.

Download Dimensions; Instructions; Advice Easily plan your installation. Simply download PDF information for any Scanstrut product.

New Mast Mount Foot

SC19 Mast Mount

Dual Pole Mount

New design allows even easier installation of Scanstrut’s original and best selling product.

New mast mount for smaller radome antennas – combines our SC12 and SC18 into one mount for even easier product selection.

Using our SC100 Pole, install 30cm / 40cm satcom antennas above our Self-Levelling Radar Mount.

Photo Gallery Comprehensive photo gallery, complete with on-board product installation examples.

Contents

Instrument Pods 2 Scanpod Overview 3 Helm Pods Mast Pods 4 Deck Pods & Flex-Mount System 5 Powerboat Products 6–7 Product Preview Install Radar 8–9 PowerTower® Install Satcom 10 – 11 PowerTower® 12 – 13 Antenna Mounts Install Radar & Satcom 14 Dual PowerTower® 15 Compact Dual PowerTower® Sailboat Products 16 – 17 Product Preview Install Radar 18 – 20 Self-Levelling Mounts – Backstay – Pole – Mast 21 Mast Mounts 22 SC100 Pole Mounts 23 SC2 Pole Mounts Install Satcom 24 – 25 Mast Mounts Install Radar & Satcom 26 – 27 Dual Self-Levelling Pole Mount Accessories 28 Powered Hinge System Light & GPS / VHF Antenna Mounts (+ Extender Mounts) 29 Gantry Mount 4° Base Wedge Adjustable Base Wedge Mast Mount Adapter Kit 30 GPS / VHF Antenna Mount Radar Guards 31 Cable Conduit Lifting Crane Deck Flood Light Camera Mounts 32 FLIR Camera Mounts OEM & Custom Products 33 OEM Products

Mast Mount for 40cm & 60cm Satcom Antennas New range of mast mounts allow installation of larger satcom antennas on to sailboats. Modular top plate for compact shipping.

For more details visit www.marinemegastore.com or call 0871 8732404

2

Camera Mounts NEW mounts for installing cameras onto your power or sailboat. Options for FLIR Cameras.

Technical Info 34 - 41 Specifications 42 –44 Product Selection Guides 45

Sponsored Sailors

1


Displays

For more details visit www.marinemegastore.com or call 0871 8732404

new

Scanpod

Helm Pods

New Range of Instrument Mountings Our exciting new range of instrument pods takes a fresh look at the challenge of installing chart plotters, radar displays, instruments and autopilot controls onto yachts and powerboats. • • • • • •

Models grouped into logical size options – up to 8” displays; 10” & 12” displays; 15” displays. Two case depths – shallow & deep – compact mounting of displays. Simplified range – easy product selection. Choice of colours – new silver or traditional white. Designed to mount instruments from all key brands of marine electronics. Complete fitting kit – seals, drills, stainless fastenings etc.

new Helm Pods

Pods

Install chart plotter, radar displays, instruments and autopilot controls onto your sailboat. Universal fit for 9.5” and 12” centre pedestals and a simplified range makes product selection easy. • Compact styling – takes up less space at helm. • Supplied uncut to fit any display. • Supplied with complete fitting kit – seals, drills, stainless fastenings etc. • Compatible with Scanpod Flex-Mount System (see page 5) – more choice of display position.

Option to install additional instruments at the helm

Models to fit 8”, 10”, 12” & 15” displays

Innovative watertight seal system – full instrument protection

scanstrut.com

Tamper-proof stainless fastenings – secure install without self-tapping into plastic

2

Innovative watertight seal system – full instrument protection

Tamper-proof stainless fastenings – secure install without self-tapping into plastic

Universal fit to 9.5” and 12” centre pedestal guards – easy product selection

Scanpod part numbers:

Supplied uncut to fit any display

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

Display size Up to 8” 10” & 12” 15”

‘Shallow’ back SPH-8S SPH-12S SPH-15S

‘Deep’ back SPH-8D SPH-12D SPH-15D

Display size Standard navigational instruments & autopilots

2 x std instruments SPH-2I

4 x std instruments SPH-4I

* When ordering please specify S for Silver or W for White i.e. SPH-8S-S

Please note, ‘shallow’ back pods will fit: Simrad NX40 and NX45 Northstar M Series Simrad GB40 10” [DI10] fits SPH-8S All other displays fit deep back pods.

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41 For more details visit www.marinemegastore.com or call 0871 8732404

3

3


Displays

For more details visit www.marinemegastore.com or call 0871 8732404

new

Scanpod

Flex-Mount

new Mast Pods

new

Pods

new

Install standard or larger 20/20 maxi style instruments at the mast for a clear view. Universal mount system fits a wide range of mast sizes.

Deck Pods

Flex-Mount System

• • • •

A range of universal pods to install displays onto your powerboat, commercial vessel, RIB or sailboat wheelhouse. Easily mounted on any surface, flat or sloping.

To complement our new Scanpod range we’re pleased to introduce our Flex-Mount System. This modular range adds to our Scanpod models and provides additional functions such as a swivel rail top mounting for even greater screen viewing. Look out for more useful options added to the Flex-Mount range during 2009.

Options for standard and large instruments – standard navigational instruments and 20/20 maxi style displays. Choice of carbon and ABS models – lightweight and cost effective options. Supplied uncut to fit any electronics. Supplied with complete fitting kit – seals, drills, stainless fastenings etc.

• Two case depths - shallow & deep - compact mounting of displays. • Choice of colours - new silver or traditional white.

Three models available: Carbon ABS ABS

3 place 2 place 4 place

- to fit up to 3 x maxi or 20/20 instruments - to fit 2 x standard nav instruments - to fit 4 x standard nav instruments

Rail Mount

Innovative watertight seal system – full instrument protection

Innovative watertight enclosure – full protection for your valuable instruments

Use with Scanstrut Helm Pod models on low rails, powerboat consoles, twin helm yachts etc. • Allows display to be viewed from any angle. • Fits range of rail sizes. Tilt display forward / back for better viewing

Compatible with Scanstrut Helm Pod models only

Choice of colour for ABS models – new silver or traditional white Universal mounting system fits to wide range of mast sizes

scanstrut.com

Swivel base – provides level mount on any slope up to 30°

4

Models to fit up to 8”, 10” and 12” displays

Scanpod part numbers: Display size Up to 8” 10” & 12”

‘Shallow’ back SPD-8S SPD-12S

‘Deep’ back SPD-8D SPD-12D

Rotate for 360° instrument viewing

* When ordering please specify S for Silver or W for White i.e. SPD-8S-S

Scanpod part numbers: Part no.

Carbon (3 x ‘maxi’) SPM-3MAX

ABS (4 x ‘std nav. instruments’) SPM-4I

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

ABS (2 x ‘std nav. instruments’) SPM-2I

Please note, ‘shallow’ back pods will fit: Simrad NX40 and NX45 Northstar M Series Simrad GB40 10” [DI10] fits SPD-8S

Scanpod part number:

All other displays fit ‘deep’ pods.

Rail mount pod

SPFM-RM1

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41 For more details visit www.marinemegastore.com or call 0871 8732404

4

5


For more details visit www.marinemegastore.com or call 0871 8732404

Powerboat products

High quality mounting solutions for all powerboats

Power

how to choose your powerboat product Power Boat Radar

PowerTower®

Dual PowerTower®

Satcom

Satcom PowerTower®

Satcom Antenna Mount

SC2 Pole Mount

product range overview POWERTOWER®

PowerTower®

Available in Composite, Stainless & Aluminium materials. Several options for radar antennas, forward or aft leaning profile and choice of antenna heights. Pages 8 and 9.

SATCOM POWERTOWER®

Satcom PowerTower®

More choice of antenna position = maximum satcom performance. Small mounting base and raises antennas clear of obstructions. Pages 10 and 11.

scanstrut.com

SATCOM ANTENNA MOUNT

6

Satcom Antenna Mount

Reduce mounting area by 60% = greater choice of antenna position. Low level, space saving mounts with watertight seal and cable management. Pages 12 and 13.

contents

®

DUAL POWERTOWER

Dual PowerTower®

Install Radar

Two antennas, one mount = maximum performance from both antennas. Space saving installation for radar with satcom/tv antennas. Pages 14 and 15.

PowerTower®

8–9

Install Satcom

positioning

Satcom PowerTower®

10 – 11

Satcom Antenna Mount

12 – 13

Install both Radar & Satcom Dual PowerTower®

For more details visit www.marinemegastore.com or call 0871 8732404

5

14 – 15

7


Radar

For more details visit www.marinemegastore.com or call 0871 8732404

®

PowerTower

Power

®

PowerTower

PowerTower®

®

Which PowerTower do I need?

We are pleased to offer a model to suit practically every current radar – see pages 42-44 to find the compatible options for your antenna. The key differences in the ranges are shown below.

For radomes and open-array antennas Expertly designed to install your antenna on the cabin roof, flybridge or radar arch of your power boat. This provides a clear view of the horizon for maximum antenna performance. All PowerTower® models are built using the best marine grade materials, with unrivalled strength and surface finish.

Composite Material Single piece composite structure / gloss white finish

Weight 1.3 to 2.2 kg (3.0 - 5.0 lbs)

Height 150mm (6”) or 350mm (14”)

Profile 30° aft leaning

Footprint 200mm (8”) square

Install Time 45 minutes

• Also fits 30cm and Fleet 33 satcom antennas. Please see product guide for compatibility (pages 42 – 44). Antenna fastens to PowerTower® using own mounting bolts

PT2005 150mm for low level clearance.

Waterproof IP65 cable gland seals cable entry into stem

Pre-drilled mounting holes for a quick & easy installation*

PT2001 350mm for increased radar horizon.

PT2005 + SC111 + SC113 See pages 28-31 for accessories. Composite PowerTower® do not fit open array antenna.

Stainless

*Composite PowerTower® is supplied un-drilled complete with drilling template.

Material Marine grade 316 stainless steel, mirror finish

Weight 2.4 to 4.3 kg (5.4 to 9.6 lbs)

Height 150mm (6”)

Profile 30° aft leaning

Footprint 150mm (6”) square

Install Time 45 minutes

Hollow stem enables cables to be routed neatly inside

SPT1002 150mm for low level clearance.

Watertight base seal included so no need for messy sealant

Choose from 3 distinct ranges:

scanstrut.com 8

Composite

Stainless

Aluminium

Marine grade stainless = traditional look, up-to-the minute options.

Bespoke extrusion = strength, good looks and choice.

SPT1002 + SC118 See pages 28-31 for accessories.

Aluminium Material Marine grade 6082 aluminium. Polyester powder coated

Single piece moulding = curves and strength to suit any boat.

SPT1002 Small base footprint.

Weight 1.5 to 2.6 kg (3.4 to 5.8 lbs)

Height 130mm (5”) or 250mm (10”)

APT5U 130mm for low level clearance.

Profile* 25° forward 30° aft

APT10U 25° forward leaning profile.

Footprint 180mm (7”) square

Install Time 45 minutes

APT6001 30° aft leaning profile.

* Profile: 25° forward leaning for radome installations, 30° aft leaning for open-array installations.

PRODUCT SELECTION – SEE PAGES 42-44

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

PRODUCT SELECTION – SEE PAGES 42-44

For more details visit www.marinemegastore.com or call 0871 8732404

6

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

9


Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

®

PowerTower

Power ®

Aluminium

Satcom PowerTower

Material Marine grade 6082 aluminium. Polyester powder coated

For 30cm, 40cm and 60cm satcom/tv antennas Designed to raise your satcom/tv antenna clear of obstructions, whilst minimising the footprint, allowing greater choice of antenna position.

Weight 1.8 to 5.3 kg (4.1 to 11.7 lbs)

Height 300mm (12”)

Profile Vertical

Footprint Ø 200mm - 250mm (7.9” - 9.8”)

Satcom PowerTower® Install Time 45 minutes

Antenna fastens to PowerTower® using own mounting bolts

Pre-drilled mounting holes for a quick & easy installation SATPT-33 For Fleet 33 antennas.

Two models available: Aluminium

Stainless – Compatible with 30cm, 40cm and 60cm antennas.

Hollow stem enables cables to be routed neatly inside

Material Marine grade 316 stainless steel, mirror finish

smaller satcom antenna? lower elevation?

Height 300mm (12”)

Profile 25° aft leaning

SATPT-60S For 60cm antennas.

Footprint Ø 200mm (7.9”) to 250mm (9.8”)

Install Time 45 minutes

SATPT-40S + SC114-40 See page 38 for accessories.

need to raise your antenna higher than 300mm (12”)?

®

scanstrut.com

Weight 6.4 to 10.6 kg (14.2 to 23.3 lbs)

SATPT-40S For 30cm & 40cm antennas.

Watertight base seal included – no need for messy sealant

PowerTower

SC2 Pole Mount

For 30cm and Fleet 33 satcom antennas

For 30cm, 40cm and 60cm satcom antennas The deck mounted SC2 Pole Mount makes an ideal install for satcom on decks, cabin roofs, low arches and other areas where over 300mm (12”) elevation is required.

Smaller 30cm and Fleet 33 satcom antennas can also be installed with selected PowerTower® models.

• Available in a 1.0m (3’4”) height, the pole can be cut to your chosen height. • See page 23 for further information.

• Please refer to the Product Selection Guide on pages 42 – 44 for compatibility.

PRODUCT SELECTION – SEE PAGES 42-44

SATPT-60 For 60cm satcom antennas.

new Stainless

– Compatible with Fleet 33, 30cm, 40cm and 60cm antennas.

10

SATPT-40 For 30cm & 40cm antennas.

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

PRODUCT SELECTION – SEE PAGES 42-44

For more details visit www.marinemegastore.com or call 0871 8732404

7

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

11


Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Antenna Mounts

Power

Satcom Antenna Mount For 30cm, 40cm, 60cm and 80cm satcom/tv antennas

For KVH G8/M9 & Fleet 77 antennas

Space on board is always limited for installing satcom antennas. Our Satcom/tv Antenna Mounts eliminate this problem by reducing the mounting footprint size by up to 60%. This provides a greater choice of antenna position and guarantees maximum satcom antenna performance.

• Minimises footprint of KVH G8/M9 and Fleet 77 antennas by 50%. • Raises antenna by 80mm (3.1”), antenna inspection hatch opens fully for easy cable connection.

• Single piece composite GRP moulding for a high strength, corrosion free mounting.

Antenna Mount

SC80 Minimises footprint of KVH G8 / 9 and Fleet 77 antennas by 50%.

Adapter mount fixings hidden internally for a neat and elegant installation

Watertight installation includes factory fitted seal & gland systems

Pre-drilled mounting holes for a quick & easy installation

Antenna fixings external for ease of antenna installation and maintenance

scanstrut.com

Material High strength composite GRP moulding. Gloss white gel coat

12

Weight 0.2 to 6.4 kg (0.4 to 14.2 lbs)

Footprint Ø 200mm (7.9”)

Install Time 45 minutes

Antenna fixings external for ease of antenna installation and maintenance

Cables installed through gland plate (IP68) for watertight installation for up to 5 cables

Material Marine grade 316 stainless steel, mirror finish

Weight 0.2 to 6.4 kg (0.4 to 14.2 lbs)

Footprint Ø 230mm (9”)

Height 80mm (3.1”)

Install Time 45 minutes

For small satcom antennas SC45 installed onboard Sunseeker powerboat

SC45R SC45R designed in co-operation with Raymarine. Approved by Raymarine as recommended solution for mounting 45 STV.

PRODUCT SELECTION – SEE PAGES 42-44

• Space saving and watertight adapter mount for smallest satcom domes (e.g. Fleet Broadband 250). • Extra depth allows internal space for large cable plugs and connectors. • Made from a UV stable marine grade polymer.

SC65 Minimises satcom antenna footprint. See pages 28-31 for accessories. SC80 Satcom Antenna Mount on Marquis 65.

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

PRODUCT SELECTION – SEE PAGES 42-44

For more details visit www.marinemegastore.com or call 0871 8732404

8

See page 44 for antenna compatibility.

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

13


Radar & Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

®

Dual PowerTower

Power

®

®

Dual PowerTower

Compact Dual PowerTower

For radomes or open-array radars and 30cm, 40cm or 60cm satcom/tv antennas

For radomes and 30cm satcom/tv antennas

®

Dual PowerTower mounts allow the installation of radar and satcom/tv antennas, together on a single space-saving mount. Mounting the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications. Alternative design for open array installations – enables clearance as array rotates

Waterproof IP65 glands seal cable entry into stem

Pre-drilled mounting holes for quick and easy installation

The minimal mounting area and compact antenna positioning make this option ideal for smaller powerboats where mounting space is very limited.

New satcom top plate allows installation of navlight gantry

Pre-drilled mounting holes for quick and easy installation

• Lightweight installation, only 3.8kg (8.3lbs). • Low profile – makes ideal mount for smaller power boats.

Adjustable radar mounting plate, ensures near perfect antenna weight balance and minimal load on the radar arch

Integral cable management system hides cables from view

Waterproof IP65 glands seal cable entry into stem

Integral cable management system hides cables from view

Small footprint – fits very narrow radar arches

Small footprint – fits very narrow radar arches

scanstrut.com

Material Marine grade 6082 aluminium/ polyester powder coated for a durable gloss white finish

14

DPT-SO1-40 installed on Sunseeker powerboat

Dual PowerTower®

Weight 6.3 to 11.6 kg (13.9 to 25.5 lbs)

DPT-SO1-40 Suitable for open-arrays up to 4’.

PRODUCT SELECTION – SEE PAGES 42-44

Footprint 290mm (11.5”) square

Install Time 75 minutes

DPT-SR2-40 Suitable for 2kW & 4kW radomes.

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

Material Marine grade 6082 aluminium / polyester powder coated for a durable gloss white finish

DPT-SR2-30

DPT-SR1-30 Compact, space-saving mount.

PRODUCT SELECTION – SEE PAGES 42-44

For more details visit www.marinemegastore.com or call 0871 8732404

9

Weight 3.5 to 3.9 kg (7.7 to 8.6 lbs)

DPT-SR2-30 Lightweight installation.

Footprint 200mm (7.9”) square

Install Time 75 minutes

DPT-SR1-30 + SC114-40 See pages 28-31 for accessories.

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

15


For more details visit www.marinemegastore.com or call 0871 8732404

Sailboat products

A full range of installation solutions for sailboats

Sail

how to choose your sailboat product Sail Boat Radar

Self-Levelling Radar Mount

Satcom

Mast Mount

Pole Mount

Dual Pole Mount

product range overview SELF-LEVELLING RADAR MOUNT

Self-Levelling Radar Mount

Available in mast, backstay or pole mounted versions. Keeps radar level with horizon for best antenna performance. Pages 18 – 20.

MAST MOUNT

Mast Mount

Universal fit to any mast = cost effective solution for the latest radomes. New models for larger satcom antennas and new mounting foot design. Page 21.

SC100 POLE MOUNT Off-the-shelf versatility = fits any boat and in any position. Deck or sloping transom mount, integrated cable management. Page 22.

SC100

contents

SC2 POLE MOUNT

scanstrut.com

Pole Mount

16

For blue water sailors = total stability for larger antennas on larger yachts. Through-deck and deck mounted pole options. Page 23.

Install Radar Self-Levelling Radar Mount SC2

Mast Mount

18 – 20 21

DUAL POLE MOUNT

Dual Pole Mount

Combination mount = installs radar with additional antennas above. Space saving installation, self-levelling radar, satcom and GPS in a single mount. Pages 26 – 27.

SC100 & SC2 Pole Mount

22 – 23

Install Satcom

positioning

Mast Mount

24 – 25

SC100 & SC2 Pole Mount

24 – 25

Install both Radar & Satcom Dual Pole Mount

For more details visit www.marinemegastore.com or call 0871 8732404

10

26 – 27

17


Radar

For more details visit www.marinemegastore.com or call 0871 8732404

Self-Levelling Mounts

Sail

Self-Levelling Radar Mounts

Backstay Mounted

For 2kW and 4kW radomes

• Bespoke 2.6m (8’6”) aluminium mounting pole, supplied in 2 lengths with hidden joiner piece. • High-strength universal base for mounting pole – eliminates loading on backstay. • Options to mount radome forward or aft of backstay. • Also suitable for both adjustable and split backstays (see tip on page 18). • Nylon bushes supplied for backstays 6mm (0.2”) up to 14mm (0.6”) diameter.

Ensure your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels, the radar is kept horizontal preventing target loss and providing the best possible radar picture. Complete range now available: • Backstay Mounted – positions radar on backstay = uncluttered decks. • Mast Mounted – mounts radar higher up on mast = maximum horizon. • Pole Mounted – option to mount both radar & satcom = space saving.

The Scanstrut Self-Levelling Radar Mount is a great product! It is easy to install for anyone who knows how to use a toolbox. The radar picture shows a remarkable improvement and the mount fits perfectly with the design of any yacht. Olaf Schmidt, Technical Editor of Germany`s No. 1 Sailboat magazine “YACHT”.

Compact cradle compatible with all current radomes

Hydraulic damping reacts to major changes in heel angle of boat whilst eliminating all minor oscillations

LMB Head Unit Simply clamps around backstay.

Light weight head unit reduces weight aloft

scanstrut.com 18

When mounting radome forward of backstay, check clearance between radome and mainsail.

Footprint 55mm x 43.5mm (2.2” x 1.51”)

Deck Fixing Deck or transom mounting.

new Pole Mounted

Install Time 120 minutes

LMB-F1 See pages 28-31 for accessories.

tip

Upgrade your SC100 Pole Mount to self-levelling with • Based on our SC100 Pole Mount (page 22), using an adapter unit that installs our upgrade kit. and supports the levelling mechanism on to the pole top. Please note, 2.5m (8.4’) pole length is required. • Supplied with a deck strut and rail stand-off for maximum fore / aft and Please contact Scanstrut for further information. sideways support. • Universal adjustable pole base that fits any sloping surface from horizontal all the way to vertical. • Unique pole extrusion has two cable channels with secure covers to hold cables in place. • Dual Mount option available - for installing both radar and small satcom antenna (see page 26).

Passive system, no power required. Sealed system, entirely maintenance free

Material Machined and anodised aluminium pole and head unit. Marine grade 316 stainless steel cradle and base plate

All stainless parts are mirror polished, 316 marine grade

tip

Weight 8.5 kg (18.8 lbs)

Material Machined and anodised aluminium pole and head unit. Marine grade 316 stainless steel cradle and base plate

Self-Levelling Mounts

Weight 12.0 kg (26.4 lbs)

Footprint Ø 80mm (3.1”)

Install Time 120 minutes

All aluminium parts are bead blasted & bright anodised for maximum corrosion protection

tips for installing on split backstay Option 1: If backstay split length is over 2.7m (8’10”) above the deck, install the mounting pole and head unit parallel to lower backstay. Option 2: If backstay split length is less than 2.7m (8’10”) above the deck, mount system centrally and attach head unit onto the central cable above split. Pole extensions available to raise antenna higher.

PRODUCT SELECTION – SEE PAGES 42-44

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

LMP Head Unit Fits to the top of SC100 pole.

PRODUCT SELECTION – SEE PAGES 42-44

For more details visit www.marinemegastore.com or call 0871 8732404

11

LMP-1 Available in 2.5m (8.4’) pole length only.

LMP-2 See pages 28-31 for accessories.

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

19


Radar

For more details visit www.marinemegastore.com or call 0871 8732404

Mast Mounts

Sail

Self-Levelling Radar Mount – Mast

Mast Mount

For 2kW & 4kW radomes

For 2kW & 4kW radomes Hydraulic damping reacts to major changes in heel angle of boat whilst eliminating all minor oscillations

• Reduced weight aloft – complete system weighs only 3.4kg (7.5 lbs). • Easy upgrade from fixed mast mount – same mounting footprint as SC19, SC20 & M92722. • Finest quality machined and anodised solid aluminium components. • See ‘Mast Mount’ for additional features.

New foot design for 2009

Still the first choice of boat owners the world over, Scanstrut Mast Mounts are an excellent way of installing radar onto yachts. • Easy and quick to install – all fastenings supplied. • Compact mount – radar extends only minimum distance from front of mast. • Options for all current radomes. • Options available for smaller satcom antennas – see product guide on page 42. • For masts with an integral track at the front use Mast Mount Adapter Kit (see page 30).

Radome cradle with fine tune adjustment for different mast rake angles

Mast Mount

• Recessed & fixed bolt head. One-hand operation for an easier installation. • Structurally tested by University of Plymouth, with results exceeding our highest in-house strength standards.

Attached to mast by four swivel feet – matches the profile of any mast

Light weight head unit means reduced weight aloft Nylon washers for all fastenings – protects paint finish

Passive system, no power is required. Sealed system, entirely maintenance free

Compact cradle compatible with all current radomes

Safety wire kit included – independently attaches scanner to mast in case an accident damages the installation

12 point fixing – high quality Monel rivets

Waterproof cable grommet included – seals cable entry into mast

scanstrut.com

Material Machined and anodised aluminium pole and head unit. Marine grade 316 stainless steel cradle and base plate

20

LMM-1 on Class 40 racing yacht “Fujifilm”

Weight 3.7 kg (8.1 lbs)

LMM-2 Mounts for the newest radomes.

PRODUCT SELECTION – SEE PAGES 42-44

Install Time 60 minutes

LMM-1 + LM-GPS See pages 28-31 for accessories.

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

Material Marine grade 6082 aluminium. Polyester, white powder coating

M92698 onboard Beneteau 50’ yacht

Weight 0.9 to 2.9 kg (2.1 to 6.5 lbs)

SC19 New design for 12” and 18” radomes.

PRODUCT SELECTION – SEE PAGES 42-44

For more details visit www.marinemegastore.com or call 0871 8732404

12

Install Time 60 minutes

M92722 Mast Mount for Raymarine 2kW antennas .

SC20 + SC27 See pages 28-31 for accessories.

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

21


Radar

For more details visit www.marinemegastore.com or call 0871 8732404

Pole Mounts

Sail

SC100 Pole Mount

SC2 Pole Mount

For 2kW & 4kW radomes

For larger radomes and open-array radars

Totally universal, SC100 Pole System will fit any boat and in any position. Supplied as a complete kit with everything necessary for a quick and easy installation.

The ideal installation for blue water yachting, our SC2 Pole System is designed for yachts from 12m (40’) upwards. With a 100% reliability track record through the toughest sailing conditions, SC2 is the preferred choice for offshore sailors the world over.

Supplied with two support modules: a deck strut and a rail stand-off to provide maximum fore/ aft and sideways support

• Two heights available:

1.9m (6.5’) recommended for deck mounting. 2.5m (8.4’) recommended for transom mounting. • Can fit to angled decks, narrow swimming steps and steeply sloping transoms. • Fits 30cm, 40cm and Fleet 33 satcom antennas. See product guide for compatibility (page 44). • Existing SC100 Pole Mount installations can be upgraded to self-levelling with our upgrade kit. See ‘tip’ on page 19 for further information.

• SC2 Pole Mounts are supplied with pole, base and top plate as a complete kit. • Also fits 30cm, 40cm and 60cm satcom antennas. Please refer to product guide on page 44.

Available as a deck mounted or through-deck installation:

Unique pole extrusion has two cable channels with secure covers to hold cables in place – neat installation Universal adjustable base – able to rotate through 360° and angle from horizontal all the way to vertical

Deck Mounted

Through-Deck Mounted

• Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required. • 1.0m (3’4”) height available – pole can be cut to size.

• Mounted through-deck to provide maximum stability for taller installations and heavier antennas. • 3.0m (10’) and 4.0m (13’) heights available.

Pre-drilled mounting holes for a quick and easy installation

Small base footprint - minimal deck space needed

Material Marine grade 6082 aluminium polyester powder coated / marine grade 316 stainless steel, mirror finish

Weight 8.3 to 14.6 kg (18.3 to 32.1 lbs)

Footprint Ø 80 mm (3.1”)

Install Time 75 minutes

Unique collar system clamps pole at deck level and also at its base inside the boat

scanstrut.com

Base supplied to support shorter pole length – no support struts required

22

SC100 Pole Mount installed on Beneteau 40.7

Pole Mount

SC100 Suitable for 2kW & 4kW radomes.

SC100 + SC120 See pages 28-31 for accessories.

Material Marine grade 6082 aluminium. Polyester powder coated

Weight 6.6 to 15 kg (14.5 to 33 lbs)

Recommended minimum of 0.6m (20”) pole below deck

GRP base can be laminated to the inside of the hull

Height 1m - 4m (3’4” - 13’)

inshore racing / winter storage

how to order your SC2 Pole Mount:

Need to remove your radar for inshore racing? To remove the pole, simply release the support modules to leave just the low profile base on deck. This is quick to do, switching you to race mode in 20 minutes.

Specify the following: 1 required pole height e.g. 4.0m (13’). 2 antenna make and model – e.g. SC2-4 / KVH M5 = 4.0m (13’) through deck mount for KVH M5.

PRODUCT SELECTION – SEE PAGES 42-44

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

PRODUCT SELECTION – SEE PAGES 42-44

For more details visit www.marinemegastore.com or call 0871 8732404

13

GRP base provides level mount for lower set of collars

Footprint 193mm - 265mm (7.6” - 10.4”)

Install Time 120 minutes

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

23


Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Mast Mounts

Sail

new Satcom Mast Mount

Mast Mount

For 40cm and 60cm satcom/tv antenna New Satcom Mast Mounts provide a new solution for installing larger satcom antennas on the mast, clear of the deck and free from obstructions. • New mounting foot design for 2009 (see page 21). Modular top plate for compact mount

Attached to mast by four swivel feet – matches the profile of any mast

SC16 Satcom Mast Mount

SC40 Fits 40cm satcom antennas.

SC60-1 Fits 60cm satcom antennas.

SC60-3 See page 44 for compatibility.

Need to pole mount your satcom antenna? Nylon washers for all fastenings – protects paint finish

Safety wire kit included – independently attaches scanner to mast in case an accident damages the installation.

for smaller satcom/tv antennas:

SC100 Pole Mount For 30cm, Fleet 33 & 40cm* satcom antennas

Waterproof cable grommet included – seals cable entry into mast 12 point fixing – highest quality Monel rivets

For 60cm Satcom Mast Mount Attached to mast by 8 swivel feet – feet double up for additional support for heavier antennas

Totally universal, SC100 Pole System will fit any boat and in any position. • See page 22 for further information. * Please note, when installed with a 40cm satcom antenna, kit is supplied with 2 x 1800mm deck struts for additional support.

24 point fixing – highest quality Monel rivets

for larger satcom/tv antennas:

scanstrut.com

Material Marine grade 6082 aluminium/ polyester powder coated for a durable and gloss white finish

24

Weight 1.8 to 2.9 kg (4.0 to 6.4 lbs)

Install Time 60 minutes

SC2 Pole Mount For 30cm, 40cm and 60cm satcom antennas

For 30cm satcom antenna (including Fleet 33)

Available as a deck mounted or through-deck installation*. • See page 23 for further information.

Install smaller satcom antennas (30cm and Fleet 33) on our compact SC16 and SC20 Mast Mounts.

* Please note, SC2 Pole Mounts are supplied with pole base and top plate as a complete kit. An additional Satcom Antenna Mount may be required for the installation. See pages 42 - 44.

• Please refer to the product selection guide on pages 42 - 44 for compatibility.

PRODUCT SELECTION – SEE PAGES 42-44

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

PRODUCT SELECTION – SEE PAGES 42-44

For more details visit www.marinemegastore.com or call 0871 8732404

14

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

25


Radar & Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Dual Pole Mounts

Sail

Dual Self-Levelling Pole Mount

Dual Pole Mount

For 2kW or 4kW radomes and 30cm or 40cm satcom/tv antennas This Pole Mount System enables a dual option for installing both a radar and satcom antenna on a single space saving mount. Our Self-Levelling Mast Mount is fitted to the pole and a top platform supports the satcom/tv dome above the radar ensuring best performance from both applications. Top plate for satcom antenna Dual Pole Mount on Bavaria yacht

Unique pole extrusion with two cable channels with secure covers to hold cables in place – neat installation

Levelling unit attaches to pole by four swivel feet

Hydraulic damping reacts to major changes in heel angle of boat whilst eliminating all minor oscillations

12 point fixing – highest quality Monel rivets

Supplied with two 1800mm deck struts to provide maximum fore/aft and sideways support

scanstrut.com

Compact cradle compatible with all current radomes

26

Universal adjustable base – able to rotate through 360° and angle from horizontal all the way to vertical

Material Marine grade 6082 aluminium / marine grade 316 stainless steel, mirror finish

Weight 14.4 to 17.5 kg (31.8 to 38.6 lbs)

PRODUCT SELECTION – SEE PAGES 42-44

DMLP-2-30 Space saving installation.

DMLP-1-30 See pages 28-31 for accessories.

Our customers love Scanstrut products!

When researching which mount to use for my radar dome, one name kept surfacing. Scanstrut products are installed on a significant number of the Class40 fleet, by skippers I respect. Their Self-Levelling Radar Mount offers all of the functionality I was looking for, in a robust yet lightweight form. The team from Scanstrut was a pleasure to work with, and I highly recommend their products.

Compliments on this bit of kit - a great

piece of engineering. All assembled by two amateurs in an afternoon, and radar and DGPS working beautifully, even in severe conditions in the North Channel recently. It has been widely admired. Patrick Dorgan, Scanstrut Customer.

Michael Hennessy,

Skipper of Class 40 racing yacht.

I assembled the support (Self-Levelling Backstay Mount) and it went very well

based on the instructions which were very clear. I am very happy with the installation and I have had numerous positive comments from others. Thank you very much for your assistance and information which allowed me to plan the attachment to the chainplate. I will certainly recommend Scanstrut to others.

Barry & Dale Keith, Scanstrut Customers.

Small base footprint – minimal deck space needed

Height 2.5m (8.4’)

Footprint 80 mm (3.1”) square

Install Time 120 minutes

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41

Scanstrut has been a thoroughly professional company to deal with

providing a consistent level of service and delivering a quality product on time, specification and budget.

Tim Ford, Navigational Radar Equipment Support, UK Ministry of Defence.

For more details visit www.marinemegastore.com or call 0871 8732404

15

Our customers love Scanstrut products! They are well designed, look great on

Thank you for all your help with the radar mounting pole instructions. I am very impressed by the quality of the product... I would like to say that your response to my problem was terrific and it’s very refreshing to find a company that cares about what it does.

any boat and make installation of our antennas quick and easy. With such a comprehensive selection of mounting options, Scanstrut is recommended for any installation.

Mel Sargent. Scanstrut Customer.

Ian Palmer, Vice President Satellite Sales, KVH Industries Inc.

27


Radar & Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Accessories

Power

new Powered Hinge System Dual PowerTower®

Satcom PowerTower®

Light & GPS / VHF Antenna Mounts

Fully powered hinging system for Scanstrut Dual PowerTower® and Satcom PowerTower®.

PowerTower®

• Reduces height for passing under bridges and for winter storage. • Remote operation. • Low profile mounting. • Fully watertight installation to IP67. • Cables run internally via watertight seal. • Easy to retro-fit to an existing installation.

Pole Mount

Install navigation lights and GPS / VHF antennas above the radar for maximum visibility and performance.

SC111

• Pre-drilled for easy retrofit installation. • Attach using radome mounting bolts – no extra fastenings required. • Cables run internally via watertight seal. • Marine grade 316 stainless steel. Part No. SC110

Dual PowerTower®

SC113

Accessories

SC111

SC112

SC113

Compatibility Nav Light Mount – Fits Perko 100 / 200, Aqua Signal 25 & 40 series lights GPS / VHF Antenna Mount (starboard sided mount) – 1” x 14 tpi thread Fits all standard GPS / VHF / Navtex antennas GPS / VHF Antenna Mount (port sided mount) – 1” x 14 tpi thread Fits all standard GPS / VHF / Navtex antennas Integrated Nav Light Mount – Pre-fitted with Hella NaviLED 360° all-round white light and supplied with 2.0m (6’7”) of connected cable

SC111 + SC110

Need to raise your light or antenna even higher?

Extender Mounts Part No. PHS-01

Stainless extension mounts for GPS / VHF antennas and Nav Lights.

Compatibility Use with Dual PowerTower® or Satcom PowerTower®

• Elevates application a further 300mm – 400mm (12” – 16”) above our standard mount for maximum performance.

Gantry Mount Dual PowerTower®

PowerTower®

scanstrut.com

Satcom PowerTower®

28

Part No. EXT-LIGHT EXT-LED EXT-GPS

Provides a combination mount for lights and aerials in a single space saving installation. Positions lights and antennas for maximum performance from each application. • Attach using antenna mounting bolts, no extra fastening required. • Cables run internally via watertight seal. • Marine grade 316 stainless steel. SC118 – For installation with Stainless and Aluminium PowerTower®

Compatibility Extender for Nav Lights 400mm (16”) Extender with Integral LED Nav Light 400mm (16”) Extender for GPS & VHF Antennas 300mm (12”)

* Please note, light accessory mounts are only compatible as part of a radome installation. For installation with 30cm satcom (excl. Fleet 33) use EXT-LIGHT / LED Extender Mounts.

SC118

Adjustable Base Wedge

SC114-40

Satcom Antenna Mount

SPT2010

SC114 – For installation with Dual PowerTower® and Satcom PowerTower®*

4° Base Wedge PowerTower®

* Excluding installations with Fleet 33 & 55 antenna.

Compatibility Gantry Mount for Aluminium / Stainless PowerTower®. Only compatible as part of a radome installation Gantry Mount for Dual PowerTower® & Satcom PowerTower® (30cm & 40cm domes). Not compatible with Furuno SC50 or Simrad TV45 / 46 Gantry Mount for Dual PowerTower® & Satcom PowerTower® (60cm domes)

* SC114-40 also compatible with Aluminium and Stainless PowerTower®

Satcom antennas require a horizontal mounting surface to function correctly. Finding this on any powerboat is often difficult. Our satcom wedge solves this problem by providing a level surface on slopes from 0° to 12°. • Simply counter rotate the angled discs until the top surface is horizontal. • UV stabilised, marine grade polymer in white.

• Allows combined installation of anchor, all round, steaming and aft lights. • Pre drilled to fit Perko 100 / 200, Aqua Signal 25 & 40 series lights, Hella 2984 series, Hella NaviLED Pro series (using NaviLED 360 surface mount).

SC114-60

GPS antennas should ideally be positioned above the radar and never in line with the radar beam.

GPS / VHF antenna mounts are compatible with 30cm satcom (excl. Fleet 33).

• Combined mounting solution for navigation / search lights, GPS / VHF antennas. • Pre drilled to fit Perko 100 / 200, Aqua Signal 25 & 40 series lights, Hella 2984 series, Hella NaviLED Pro series.

Part No. SC118 SC114-40*

tip

Part No. SC50

Compatibility Install with SC35, SC45, SC45R and SC65 only

Angles your radar down 4° below horizontal. Fits under PowerTower® base to provide a level horizon for your radar when the boat is bow’s up underway. • Pre-fitted watertight base seal. • All mounting holes pre-drilled. Part No. PT3010 SPT2010

Compatibility Use with Composite & Aluminium PowerTower® Use with Stainless PowerTower®

For more details visit www.marinemegastore.com or call 0871 8732404

16

SC50

29


Radar & Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Accessories Self-Levelling Mounts

Sail

GPS / VHF Antenna Mount Accessory for Self-Levelling Radar Mount

Mast Mount

• Single mount to install an additional GPS / VHF antenna above the radar. • Compatible with Backstay, Mast, Pole and Dual Pole mounted options. • Attaches to top of radome cradle. • Marine grade 316 stainless steel. Part No. LM-GPS

Accessories

Cable Conduit

Self-Levelling Mounts

Simply run cables down the outside of the mast using our easy fit cable conduit. Rivet the back section to the mast, lay in the cables and snap the cover on! Supplied in 1.5m lengths, easily cut to fit. Part No. SC33 SC66

SC66

Compatibility up to 14mm (0.5”) dia cables up to 18mm (0.7”) dia cables

SC33

50100

Deck Flood Light

Compatibility 1” x 14 tpi thread – to fit all standard GPS / VHF / Navtex antennas

Pole Mount

Mast Mount Adapter Kit Mast Mount

For masts with an integral track at the front that makes it difficult to fit a standard mast mount. Fits all Scanstrut mast mounts.

Self-Levelling Mounts

Part No. 50100

LM-GPS

Super bright, 55W sealed beam halogen deck light. • Weatherproof and shockproof. • Pre-wired for simple installation. Part No. SC117 SC117-4

Compatibility For use with SC100 Pole Mount For use with SC2 Pole Mount

Compatibility Fits Z-Spars, Selden, Isomat, Eurospars Masts

SC120

Radar Guards Mast Mount

Polished stainless guards protect radome from damage and reduce wear on sails. Mounted using radome bolts, easy to fit and require no extra fastenings. Mast Mount SC12 SC18 SC19 SC20 SC21 M92722 M92698

Part No. & Compatibility SC25 Radar Guard SC24 Radar Guard SC24* / SC25 Radar Guard SC27 Radar Guard SC26 / SC28** Radar Guard SC27 Radar Guard SC28 Radar Guard

SC117

scanstrut.com

* SC24 to be used with 12” and 15” radomes. **SC28 to be used with Simrad DX60 & Garmin GMR 21 / GMR 41 antennas only.

30

Lifting Crane

SC27 Pole Mount

Ideal for lifting / lowering heavy outboards, luggage, supplies etc on board. • • • •

Crane rotates through 270°. Quick release pins allow easy removal for storage. 30kg / 66lbs max lift weight. Kit includes 4:1 tackle system and locking cleat.

Part No. SC120 SC120-4

Compatibility For use with SC100 Pole Mount For use with SC2 Pole Mount

For more details visit www.marinemegastore.com or call 0871 8732404

17

31


Radar & Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Camera Mounts

Custom & OEM

new Camera Mounts

Custom Products

Custom & OEM Projects

Scanstrut is a recognised and respected supplier of custom and standard products to several of the world’s best sail and powerboat builders.

Mast Mount Compact mast mount for installation of cameras on yacht masts.

Part no. CAM-MM-01 Compatible with: • FLIR Navigator (Static and Pan / Tilt). • Raymarine CAM100 (Day and Night Marine camera).

Innovative mounting foot design for 2009 (see page 21)

Safety wire kit included – independently attaches camera to mast in case an accident damages the installation

12 point fixing – highest quality Monel rivets

Attached to mast by 4 swivel feet – universal fit on any mast

Powerboat Mount Adjustable mount which can be installed on the cabin roof, flybridge and radar arches to provide a level mounting for your camera on any sloping surface.

Design & Production service for power & sailboat builders. From a one-off mounting to a custom product range for a new boat model, Scanstrut will provide a complete design and build service for bespoke solutions. Our experienced designers listen to your needs and develop the right solution to meet your exact installation requirements. Scanstrut OEM projects have successfully: • Reduced time & build costs. • Simplified stock holding. • Introduced technically superior products.

Part no. CAM-PM-01 Compatible with:

scanstrut.com

• FLIR Navigator (Static and Pan / Tilt). • Raymarine CAM100 (Day and Night Marine camera).

32

Camera can also be angled up or down for perfect viewing

Custom navlight mast onboard Sealine SC47

Recent Custom & OEM projects Sealine – Custom navlight mast supplied with standard Stainless & Dual PowerTower® Princess Yachts – Bespoke radar and Nav Light mast for flagship Princess 95MY Motor Yacht Fairline Yachts – New range of mounts for the Targa, Phantom and Squadron ranges Ampair – Pole Mount System for installation of new Ampair 300 wind turbine Fujifilm Class 40 race boat – Waterproof TV camera mounts UK Ministry of Defence – Portable radome mounting Bradstone Challenger – Custom SC2 pole mount Hugo Boss – Custom pole mount Superyacht ‘Tosca 3’ – Mast Mount for 100kg Sea-Tel antenna TSS (Vosper Thorneycroft) – Digital compass mount for patrol vessel fleet

Cables run internally through swivel base straight into the deck

Simply counter rotate sections 0 - 30° to provide a level base Raymarine Camera on Scanstrut Powerboat Mount

Camera Mount onboard Class 40 yacht “Fujifilm”

For more information on this service please contact: tom@scanstrut.com

TECHNICAL SPECIFICATIONS – SEE PAGES 34-41 For more details visit www.marinemegastore.com or call 0871 8732404

18

33


Radar & Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Specifications

Power

These dimension drawings are included to help you plan your installation. If you need any further assistance, please don’t hesitate to contact us at technical@scanstrut.com

Specifications

®

Composite PowerTower See pages 8 & 9 for details.

• All dimension drawings are available to download from our website as PDF files.

Scanpod – Helm & Deck Pods See pages 2, 3, & 5 for details. Pod Model: Dimensions: mm (in) A Max. Cut-Out Width B Max. Cut-Out Height C Enclosure Top Depth D Enclosure Bottom Depth

Pod Model: Dimensions: mm (in) A Max. Cut-Out Width B Max. Cut-Out Height C Enclosure Top Depth D Enclosure Bottom Depth

SPH-8S Helm

SPH-8D Helm

SPH-12S Helm

SPH-12D Helm

SPH-15S Helm

SPH-15D Helm

SPH-21 Helm

SPH-41 Helm

325 (12.8) 220 (8.6) 85 (3.4) 110 (4.3)

325 (12.8) 220 (8.6) 140 (5.5) 160 (6.3)

384 (15) 262 (10.3) 112 (4.4) 140 (5.5)

384 (15) 262 (10.3) 155 (6.1) 180 (7.0)

310 (12.2) 440 (17.3) 112 (4.4) 140 (5.5)

310 (12.2) 440 (17.3) 155 (6.1) 180 (7.0)

285 (11.2) 115 (4.5) 81 (3.2) 81 (3.2)

501 (19.7) 110 (4.2) 81 (3.2) 81 (3.2)

SPD-8S Deck

SPD-8D Deck

SPD-12S Deck

SPD-12D Deck

325 (12.8) 220 (8.6) 85 (3.4) 110 (4.3)

325 (12.8) 220 (8.6) 140 (5.5) 160 (6.3)

384 (15.0) 262 (10.3) 112 (4.4) 140 (5.5)

384 (15.0) 262 (10.3) 155 (6.1) 180 (7.0)

PT2002 30° aft 1.9 (4.2)

PT2003 30° aft 1.95 (4.3)

PT2004 30° aft 1.75 (3.9)

PT2005 30° aft 1.55 (3.4)

PT2006 30° aft 1.35 (3)

388 (15.3) 358 (14.1) 150 (5.9) 200 (7.9)

388 (15.3) 358 (14.1) 150 (5.9) 200 (7.9)

152 (6) 358 (14.1) 150 (5.9) 200 (7.9)

268 (10.5) 158 (6.2) 150 (5.9) 200 (7.9)

278 (11) 158 (6.2) 150 (5.9) 200 (7.9)

288 (11.3) 158 (6.2) 150 (5.9) 200 (7.9) 4 x M8

D

C

Base Footprint

B

C A

D

Stainless PowerTower® Profile: (leaning) Weight: kg (lbs) Dimensions: mm (in) A Height B Length C Mounting Holes D Footprint

Center section profile

B

PT2001 30° aft 2.25 (5)

See pages 8 & 9 for details.

C

Max cut-out area A

Profile: (leaning) Weight: kg (lbs) Dimensions: mm (in) A Length B Height C Mounting Holes D Footprint

SPT1001 30° aft 3.15 (6.9)

SPT1002 30° aft 2.45 (5.4)

SPT1004 30° aft 3.55 (7.8)

SPT1005 30° aft 4.35 (9.6)

152 (6) 263 (10.3) 127 (5) 152 (6)

152 (6) 245 (9.6) 127 (5) 152 (6)

152 (6) 270 (10.6) 152 (6) 203 (8)

152 (6) 270 (10.6) 152 (6) 203 (8) 4 x M8

Base Footprint

D Helm Pod

Deck Pod

D

A

C

Scanpod – Mast Pods

C

See page 4 for details. Dimensions: mm (in) A Max. Cut-Out Width B Max. Cut-Out Height C Enclosure Depth D Mounting Depth

B

SPM-3MAX

SPM-21

SPM-41

168 (6.6) 345 (13.6) 75 (3.0) 330 (13)

115 (4.5) 285 (11.2) 100 (3.9) 330 (13)

110 (4.3) 501 (19.7) 100 (3.9) 330 (13)

scanstrut.com

C

34

Max cut-out area

D

D

Aluminium PowerTower® See pages 8 & 9 for details. Profile: (leaning) Weight: kg (lbs) Dimensions: mm (in) A Height B Length C Mounting Holes D Footprint

APT19000 25° fore 1.8 (4)

APT19001 25° fore 2.25 (5)

APT5U 25° fore 1.55 (3.4)

APT10U 25° fore 1.85 (4.1)

APT52S 25° fore 1.75 (3.9)

APT102S 25° fore 2.1 (4.6)

APT6001 25° aft 2.1 (4.6)

APT6002 25° aft 2.65 (5.8)

127 (5) 295 (11.6) 127 (5) 177 (7)

254 (10) 355 (14) 127 (5) 177 (7)

127 (5) 245 (9.6) 127 (5) 177 (7)

254 (10) 303 (12) 127 (5) 177 (7)

27 (5) 267 (10.5) 127 (5) 177 (7)

254 (10) 326 (12.8) 127 (5) 177 (7)

127 (5) 278 (11) 150 (5.9) 200 (7.9)

127 (5) 290 (11.4) 150 (5.9) 200 (7.9)

B

A Base Footprint A C

D

Mast Pod

C B

For more details visit www.marinemegastore.com or call 0871 8732404

19

4 x M8

D

35


Radar & Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Specifications

Power

®

Satcom PowerTower – Aluminium & Stainless

Compact Dual PowerTower

See pages 10 & 11 for details.

See page 15 for details.

Material Profile Weight: kg (lbs) Dimensions: mm (in) A Height B Length C Footprint D Mounting Holes

Specifications

®

SATPT-33 Aluminium Vertical 1.85 (4.1)

SATPT-40 Aluminium Vertical 3 (6.6)

SATPT-60 Aluminium Vertical 5.3 (11.7)

SATPT-40S Stainless 30° Aft Leaning 6.45 (14.2)

SATPT-60S Stainless 30° Aft Leaning 10.6 (23.3)

300 (11.8) 199 (7.8) 200 (7.8) 120 (4.7)

300 (11.8) 349 (13.7) 200 (7.8) 120 (4.7)

300 (11.8) 440 (17.3) 250 (9.8) 145 (5.7)

300 (11.8) 410 (15.7) 200 (7.9) 120 (4.7)

300 (11.8) 480 (18.9) 250 (9.8) 145 (5.7)

Weight: kg (lbs) Dimensions: mm (in) A Height B C D Length E Platform Height F Footprint

DPT-SR1-30 3.9 (8.6)

DPT-SR2-30 3.5 (7.7)

255 (10) 265 (10) 404 (15.9) 669 (26.3) 200 (7.9) 150 (5.9)

255 (10) 265 (10) 404 (15.9) 669 (26.3) 200 (7.9) 150 (5.9)

Base Footprint D

A

A Radome platform 5º down angle

D B

C

C D

B

4 x M8 Aluminium

Base Footprint E F

2.6”

4x

M8

” /2.6

5mm

Ø6

F E

A

B

C

Dual PowerTower®

Stainless

See page 14 for details.

Satcom Antenna Mounts See pages 12 & 13 for details.

scanstrut.com

Material Weight: kg (lbs) Dimensions: mm (in) A Height B Overall Diameter C Mounting Holes D Footprint

36

SC31 Polymer 0.2 (0.4)

SC35 Composite 1.25 (2.8)

SC45 Composite 2 (4.4)

SC45R Composite 2.2 (4.8)

SC65 Composite 2.95 (6.5)

SC80 Stainless 6.45 (14.2)

65 (2.6) 200 (7.8) 72 (2.8) 98 (3.1)

56 (2.2) 307 (12) 120 (4.7) 200 (7.9)

68 (2.7) 360 (14.2) 120 (4.7) 200 (7.9)

68 (2.7) 360 (14.2) 120 (4.7) 200 (7.9)

60 (2.4) 465 (18.3) 120 (4.7) 200 (7.9)

80 (3.1) 352 (13.9) 205 (8) 230 (9)

SC31, SC35, SC45, SC45R & SC65

Weight: kg (lbs) Dimensions: mm (in) A Height B C D Length E Platform Height F Footprint G Mounting Holes

SC80

DPT-SR2-40 6.3 (13.9)

DPT-SO1-40 8.85 (19.5)

DPT-SO2-40 9.6 (21.1)

DPT-SR1-60 8.35 / (18.4)

DPT-SR2-60 8.2 / (18)

DPT-SO1-60 11 (24.2)

DPT-SO2-60 11.6 (25.5)

476 (18.7) 480 (18.9) 576 (22.7) 878 (34.6) 256 (10) 291 (11.5) 230 (9)

476 (18.7) 480 (18.9) 342 (13.5) 823 (32.4) 256 (10) 291 (11.5) 230 (9)

556 (21.9) 555 (21.9) 582 (22.9) 1137 (44.8) 138 (5.4) 291 (11.5) 230 (9)

556 (21.9) 557 (22) 697 (27.4) 1254 (49.4) 138 (5.4) 291 (11.5) 230 (9)

518 (20.4) 560 (22.1) 397 (15.6) 957 (37.7) 256 (10) 291 (11.5) 230 (9)

518 (20.4) 560 (22.1) 343 (13.5) 903 (35.6) 256 (10) 291 (11.5) 230 (9)

608 (24) 640 (25.2) 582 (22.9) 1222 (48.1) 138 (5.4) 291 (11.5) 230 (9)

608 (24) 640 (25.2) 697 (27.4) 1336 (52.6) 138 (5.4) 291 (11.5) 230 (9)

A

A

A

DPT-SR1-40 6.8 (15)

E B

F G

C

Base Footprint

G F

D B D C

4 x M8

DPT-SR1 / DPT-SR2

B DC

Base Footprint A Base Footprint E B

C D

For more details visit www.marinemegastore.com or call 0871 8732404

20

DPT-SO1 / DPT-SO2

37


Radar & Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Specifications

Sail

Self-Levelling Radar Mount – Backstay

Self-Levelling Radar Mount – Mast

See pages 18 & 19 for details.

See pages 18 & 19 for details.

LMB-F1 Forward 8.55 (18.8)

Position (relative to backstay) Weight: kg (lbs)

LMB-F2 Forward 8.55 (18.8)

LMB-A1 Aft 8.55 (18.8)

LMB-A2 Aft 8.55 (18.8)

LMB-A3 Aft 8.55 (18.8)

LMM-1 3.7 (8.1)

Weight: kg (lbs)

Specifications

LMM-2 3.7 (8.1)

LMM-3 3.7 (8.1)

Head unit

Chainplate adapter

mm

2.4”

/ 10

.4 102

(Supplied in 2 x 1.3M lengths with a joiner piece)

Base footprint

2x

30 mm / 1.2”

2454 mm / 96.6”

0 260

m/

2454 mm / 96.6”

DETAIL A

0m 260

Mounting pole

/ 1.2

Pole base

Radome

Cradle

mm

340 mm / 13.4”

30.4

Mast Mount See page 20 for details.

M8

Additional mounting pole extensions available: 0.65M and 1.3M lengths

12.5 mm / 0.5”

Backstay wire

43.5 mm / 1.51” A

A

Chainplate adapter Deck mounted

Transom mounted

Weight: kg (lbs) Dimensions: mm (in) A* B C D

SC12 1.4 (3.1)

SC16 1.65 (3.6)

SC18 0.95 (2.1)

SC19 1.3 (2.9)

SC20 2.1 (4.6)

SC21 2.95 (6.5)

M92722 2.3 (5.1)

M92698 1.85 (4.1)

77 (3) 351 (13.8) 185 (7.5) 110 (4.3)

65 (2.6) 400 (15.8) 198 (7.9) 95 (3.7)

72 (2.8) 311 (12.2) 85 (7.3) 92 (3.6)

68 (2.7) 348 (13.7) 197 (7.8) 95 (3.7)

65 (2.6) 460 (18.1) 268 (10.6) 95 (3.7)

65 (2.6) 520 (20.5) 278 (10.9) 125 (4.9)

65 (2.6) 467 (18.4) 278 (10.9) 95 (3.7)

76 (3) 530 (20.8) 300 (11.8) 180 (4.9)

*Indicates minimum mast width, no maximum mast width exists.

C

A

See pages 18 & 19 for details. LMP-2 12 (26.4)

LMP-1 12 (26.4)

B

B

Self-Levelling Radar Mount – Pole Weight: kg (lbs)

431 mm / 17”

Aft mounted 1286 mm / 50.6” 693 mm / 27.3”

313 mm / 12.3”

373 mm / 14.7”

Forward mounted 1327 mm / 52.2” 512 mm / 20.2”

95 mm / 3.7”

76 mm / 3.0”

A

C

LMP-3 12 (26.4) D

D

313 mm / 12”

537 mm / 21.1”

3” x 2.5M Pole

scanstrut.com

.6 47

38

mm

” .87 /1

Rail stand off 60 m 3 x M8 Adjustable base m/ 2.36 ” 83 mm / 3.27”

4 x M6

64 mm / 2.52”

Deck pad eye

Deck pad eye

2580 mm / 102”

3” Pole cover strip

Satcom Mast Mount See pages 24 & 25 for details.

Max 164 mm / 6.4” To fit 25 mm / 1” rail (as standard) 32 mm / 1.25” rail clamps also available 1200 mm Strut (as standard) 600 mm and 1800 mm also available

3” clamp

Weight: kg (lbs) Dimensions: mm (in) A* B C D E

SC40 1.8 (4)

SC60-1 2.9 (6.4)

SC60-2 2.4 (5.3)

SC60-3 2.8 (6.2)

73 (2.9) 316 (12.4) 273 (10.7) 269 (10.6) 125 (4.9)

735 (2.9) 416 (16.4) 346 (13.6) 346 (13.6) 150 (5.9)

735 (2.9) 416 (16.4) 201 (7.9) 259 (10.2) 150 (5.9)

735 (2.9) 416 (16.4) 420 (16.5) 420 (16.5) 150 (5.9)

*Indicates minimum mast width, no maximum mast width exists.

B

B

C

Adjustable base

C

C

A

A

SC60-2 D

D D

E

E C

SC40

SC60-1

SC60-3 D

For more details visit www.marinemegastore.com or call 0871 8732404

21

39


Radar & Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Specifications

Sail

SC100 Pole Mount

Dual Self-Levelling Pole Mount

See page 22 for details.

See pages 26 & 27 for product details.

Weight: kg (lbs)

SC101 8.3 (18.3)

SC102 10 (22)

SC103 8.75 / (19.3)

SC104 10.3 (22.7)

Weight: kg (lbs)

SC105-45 12.85 (28.3)

SC105-45R 13.85 (30.5)

SC106-45 14.4 (31.7)

SC106-45R 14.6 (32.1)

SC105 8.75 (19.3)

SC106 10.3 (22.7)

Specifications

Weight: kg (lbs)

DLMP-1-30 14.7 (32.3)

DLMP-1-30F 14.7 (32.3)

DLMP-3-30 15.55 (34.2)

DLMP-3-30F 15.55 (34.2)

DLMP-2-30 14.45 (31.8)

DLMP-2-30F 14.45 (31.8)

Weight: kg (lbs)

DLMP-1-45 16.5 (36.3)

DLMP-1-45R 16.7 (36.7)

DLMP-2-45 16.25 (35.8)

DLMP-2-45R 16.45 (36.2)

DLMP-3-45 17.35 (38.2)

DLMP-3-45R 17.55 (38.6)

Radome top SC101/102 top shown SC45/SC45R Satcom Adapter Universal Top Casting

3” x 1.9M Pole

3” x 1.9/2.5M Pole

Max 164 mm / 6.4”

3” x 2.5M Pole

3” Pole

3” Pole cover strip

cover strip

32 mm / 1.25” rail clamps also available

3” clamp

1800 mm Strut

Adjustable base

.87

Deck pad eye

m 6m

/1

Deck pad eye

Deck pad eye

7.

4

4 x M6

64 mm / 2.52”

4 x M6

mm .6 47

/

7” 1.8

Adjustable base

Deck pad eye 4 x M6

mm .6 47

” .87 /1

Adjustable base

approx. 864 mm / 34”

new

See page 23 for details. SC2-1 6.6 (14.5)

3 x M8 2.36 ”

1800 mm Strut

Deck pad eye

SC2 Pole Mount Weight: kg (lbs)

m/

Adjustable base

Adjustable base Adjustable base

60 m

83 mm / 3.27”

3 x M8 60 m m/ 2.36 ”

64 mm / 2.52”

600 mm and 1800 mm also available

3 x M8 2.36 ”

83 mm / 3.27”

60 m m/

83 mm / 3.27”

Rail stand off

1200 mm Strut (as standard)

approx. 1929 mm / 76”

3” clamp

64 mm / 2.52”

To fit 25 mm / 1” rail (as standard)

2535 mm / 100”

3” Pole cover strip

SC2-3 12.3 (27.1)

SC2-4 15 (33)

Deck pad eye

Camera Mount See page 32 for details. CAM-MM-01 0.7 (1.5)

Weight: kg (lbs)

CAM-PM-01 0.4 (0.9)

Top plate

40

4” Pole 1M Max

slot 2” 1 mm Ø 1 mm / 7.7 6 Ø 19 9.06” / 230 mm

Ø

SC2 Pole base

95 mm / 3.7”

4 x M9 205 mm / 8.1”

19002 Deck Collars

152 mm / 6.0”

19005 GRP base /1 0.4

CAM-MM-01

3”

Deck Mounted

Through Deck Mounted

0 - 30°

3.1” mm / .7” /4 m 0m

Ø 80

19002 Deck Collars 26 5m m

0 - 30°

Ø

12

5 mm / 0.2”

45˚

m 3m 19 Ø .59” /7

68 mm / 2.7”

scanstrut.com

Top plate

120 mm / 4.72” 120 mm / 4.72”

4” Pole, 3 & 4m lengths available (Min 0.6M below deck)

CAM-PM-01

Accessories See pages 28 & 31 for details. Accessory technical information is available on the website.

For more details visit www.marinemegastore.com or call 0871 8732404

22

41


Radar

For more details visit www.marinemegastore.com or call 0871 8732404

Radar

Product Selection

42

Aluminium PowerTower®

Page 22

Page 23

Page 8 - 9

Page 8 - 9

Page 8 - 9

Page 8 - 9

Page 8 - 9

Page 15

Page 14

Page 14

SC103 SC103 SC103 X X X X

SC104 SC104 SC104 X X X X

SC2 SC2 SC2 SC2 SC2 SC2 X

PT2005 PT2005 PT2005 X X X PT2005

PT2002 PT2002 X X X X PT2002

SPT1002 SPT1002 SPT1002 SPT1005 SPT1005 SPT1005 X

APT5U APT5U APT5U APT6002 APT6002 APT6002 X

APT10U APT10U APT10U X X X X

DPT-SR2-30 DPT-SR2-30 DPT-SR2-30 X X X X

DPT-SR2-40 DPT-SR2-40 DPT-SR2-40 DPT-SO2-60 DPT-SO2-60 X X

DPT-SR2-60 DPT-SR2-60 DPT-SR2-60 DPT-SO2-60 DPT-SO2-60 X X

GMR18 / GMR18HD GMR24HD GMR404 GMR406

18” 4kW radome 24” 4kW radome 4’ open-array 6’ open-array

SC20 SC21 X X

LMB-F1 / A1 LMB-F1 / A1 X X

LMP-1 LMP-1 X X

LMM-1 LMM-1 X X

DLMP-1-? DLMP-1-? X X

SC101 SC101* X X

SC102 SC102* X X

SC2 SC2 SC2 SC2

PT2004 PT2004 X X

PT2001 PT2001 X X

SPT1001 SPT1001 SPT1005 SPT1005

APT19000 APT19000 APT6002 APT6002

APT19001 APT19001 X X

DPT-SR1-30 DPT-SR1-30 X X

DPT-SR1-40 DPT-SR1-40 DPT-SO2-40 X

DPT-SR1-60 DPT-SR1-60 DPT-SO2-60 X

Mini RE-1 RE-8 RE-9 RE-10

12” 2kW radome 20” 2kW radome 24” 4kW radome 3.5’ / 4’ 4kW open-array

SC19 SC21 SC21 X

LMB-F2 / A2 LMB-F2 / A2 LMB-F2 / A2 X

LMP-2 LMP-2 LMP-2 X

LMM-2 LMM-2 LMM-2 X

DLMP-2-? DLMP-2-? DLMP-2-? X

SC103 SC103 SC103** X

SC104 SC104 SC104** X

SC2 SC2 SC2 X

PT2005 PT2005 X X

PT2002 PT2002 X X

SPT1002 SPT1002 SPT1002** X

APT5U APT5U APT52S X

APT10U APT10U APT102S X

DPT-SR2-30 DPT-SR2-30 DPT-SR2-30 X

DPT-SR2-40 DPT-SR2-40 DPT-SR2-40 X

DPT-SR2-60 DPT-SR2-60 DPT-SR2-60 X

1000, 1000mk2 discont. 1500, 1500mk2 discont. 1800 discont. 2000 discont. JMA 2343 [NKE-249] / 5104 [NKE-2042] JMA 2344 [NKE-250] / 5106-4 [NKE-2062-4] JMA 5110-6 / 5210-6 / 5310-6 [NKE-2102-6]

12” radome 18” radome 18” radome 18” radome 24” radome 4’ open-array 6’ open-array

SC19 SC19 SC19 SC19 SC21*** X X

LMB-F2 / A2 LMB-F2 / A2 X X LMB-A3 X X

LMP-2 LMP-2 X X LMP-3 X X

LMM-2 LMM-2 X X LMM-3 X X

DLMP-2-? DLMP-2-? X X DLMP-3-? X X

SC103 SC103 SC103 SC103 SC103*** X X

SC104 SC104 SC104 SC104 SC104*** X X

SC2 SC2 SC2 SC2 SC2*** SC2 SC2

PT2005 PT2005 PT2005 PT2005 PT2005*** X X

PT2002 PT2002 PT2002 PT2002 X X X

SPT1002 SPT1002 SPT1002 SPT1002 X X X

APT5U APT5U APT5U APT5U APT5U*** APT6002 APT6002

APT10U APT10U APT10U APT10U APT10U*** X X

DPT-SR2-30 DPT-SR2-30 DPT-SR2-30 DPT-SR2-30 DPT-SR2-30*** X X

DPT-SR2-40 DPT-SR2-40 DPT-SR2-40 DPT-SR2-40 DPT-SR2-40*** DPT-SO2-40 X

DPT-SR2-60 DPT-SR2-60 DPT-SR2-60 DPT-SR2-60 DPT-SR2-60*** DPT-SO2-60 X

2kW 4kW 2kW [RB714A] 4kW [RB715A] 4kW / 6kW [ RB716A] 6kW / 12kW / 25kW [RB717A]

12” radome 20” radome 18” radome 24” radome 3’ / 4’ open-array 6’ open-array

SC19 SC21 SC19 SC21 X X

LMB-F2 / A2 LMB-F2 / A2 LMB-F2 / A2 LMB-F2 / A2 X X

LMP-2 LMP-2 LMP-2 LMP-2 X X

LMM-2 LMM-2 LMM-2 LMM-2 X X

DLMP-2-? DLMP-2-? DLMP-2-? DLMP-2-? X X

SC103 SC103 SC103 SC103** X X

SC104 SC104 SC104 SC104** X X

SC2 SC2 SC2 SC2 SC2 SC2

PT2005 PT2005 PT2005 X X X

PT2002 PT2002 PT2002 X X X

SPT1002 SPT1002 SPT1002 SPT1002** SPT1005 SPT1005

APT5U APT5U APT5U APT52S APT6002 APT6002

APT10U APT10U APT10U APT102S X X

DPT-SR2-30 DPT-SR2-30 DPT-SR2-30 DPT-SR2-30 X X

DPT-SR2-40 DPT-SR2-40 DPT-SR2-40 DPT-SR2-40 DPT-SO2-40 X

DPT-SR2-60 DPT-SR2-60 DPT-SR2-60 DPT-SR2-60 DPT-SO2-60 X

2kW 2kW 4kW

12” radome 18” radome 20” radome

SC19 SC19 SC21

LMB-F2 / A2 LMB-F2 / A2 LMB-F2 / A2

LMP-2 LMP-2 LMP-2

LMM-2 LMM-2 LMM-2

DLMP-2-? DLMP-2-? DLMP-2-?

SC103 SC103 SC103

SC104 SC104 SC104

SC2 SC2 SC2

PT2005 PT2005 PT2005

PT2002 PT2002 PT2002

SPT1002 SPT1002 SPT1002

APT5U APT5U APT5U

APT10U APT10U APT10U

DPT-SR2-30 DPT-SR2-30 DPT-SR2-30

DPT-SR2-40 DPT-SR2-40 DPT-SR2-40

DPT-SR2-60 DPT-SR2-60 DPT-SR2-60

LRA-1800 LRA-2400 HD LRA 4000 LRA 5000

18” 2kW radome 24” 4kW radome 4’ 4kW open-array 6’ 4kW open-array

SC19 SC21*** X X

LMB-F2 / A2 LMB-A3 X X

LMP-2 LMP-3 X X

LMM-2 LMM-3 X X

DLMP-2-? DLMP-3-? X X

SC103 SC103*** X X

SC104 SC104*** X X

SC2 SC2*** SC2 SC2

PT2005 PT2005*** X X

PT2002 X X X

SPT1002 X X X

APT5U APT5U*** APT6002 APT6002

APT10U APT10U*** X X

DPT-SR2-30 DPT-SR2-30*** X X

DPT-SR2-40 DPT-SR2-40*** DPT-SO2-40 X

DPT-SR2-60 DPT-SR2-60*** DPT-SO2-60 X

8000 Series [8084/8120] 8000 Series [8084/8120] 8000 Series [8084/8120]

18” 2kW radome 24” 4kW radome 4’ 6kW open-array

SC19 SC21*** X

LMB-F2 / A2 X X

LMP-2 X X

LMM-2 X X

DLMP-2-? X X

SC103 SC103*** X

SC104 SC104*** X

SC2 SC2*** SC2

PT2005 PT2005*** X

PT2002 X X

SPT1002 X X

APT5U APT5U*** APT6002

APT10U APT10U***

DPT-SR2-30 DPT-SR2-30*** X

DPT-SR2-40 DPT-SR2-40*** DPT-SO2-40

DPT-SR2-60 DPT-SR2-60*** DPT-SO2-60

2kW 4kW [IR2-4D 25” 4Kw] 4kW / 6kW

20” radome 25” radome 3.5’ / 4.5’ open-array

SC21 SC21 X

LMB-F2 / A2 LMB-F1 / A1 X

LMP-2 LMP-1 X

LMM-2 LMM-1 X

DLMP-2-? DLMP-1-? X

SC103 SC103** X

SC104 SC104** X

SC2 SC2 SC2

PT2005 X X

PT2002 X X

SPT1002 SPT1001 SPT1005

APT5U APT52S APT6002

APT10U APT102S X

DPT-SR2-30 DPT-SR1-30 X

DPT-SR2-40 DPT-SR1-40 DPT-SO2-40

DPT-SR2-60 DPT-SR1-60 DPT-SO2-60

M series/8000i M series/8000i M series/8000i M series/8000i

18” 2kW radome 24” 4kW radome 4’ 6kW open-array 6’ 10kW open-array

SC19 SC21*** X X

LMB-F2 / A2 LMB-A3 X X

LMP-2 LMP-3 X X

LMM-2 LMM-3 X X

DLMP-2-? DLMP-3-? X X

SC103 SC103*** X X

SC104 SC104*** X X

SC2 SC2*** SC2 SC2

PT2005 PT2005*** X X

PT2002 X X X

SPT1002 X X X

APT5U APT5U*** APT6002 APT6002

APT10U APT10U*** X X

DPT-SR2-30 DPT-SR2-30*** X X

DPT-SR2-40 DPT-SR2-40*** DPT-SO2-40 X

DPT-SR2-60 DPT-SR2-60*** DPT-SO2-60 X

RD218 RD424 5S / 9S / RA1048HD / RA1048SHD 7S / 11S / RA1072HD / RA1072SHD

18” 2kW radome 24” 4kW radome 4’ open-array 6’ open-array

M92722 M92698 X X

LMB-F1 / A1 LMB-F1 / A1 X X

LMP-1 LMP-1 X X

LMM-1 LMM-1 X X

DLMP-1-? DLMP-1-? X X

SC101 SC101 X X

SC102 SC102 X X

SC2 SC2 SC2 SC2

PT2004 PT2004 X X

PT2001 PT2001 X X

SPT1001 SPT1001 SPT1004 SPT1004

APT19000 APT19000 APT6001 APT6001

APT19001 APT19001 X X

DPT-SR1-30 DPT-SR1-30 X X

DPT-SR1-40 DPT-SR1-40 DPT-S01-40 X

DPT-SR1-60 DPT-SR1-60 DPT-S01-60 X

SWR-1 SWR-8 SWR-9 SWR-10 SWR-10 GB40 / NX40/45 GB40 / NX40/45 GB40 / NX40/45 GB40 / NX40/45 DX45 DX60 MDS -1 MDS -8 MDS -9 MDS -10 MDS -10 RADARpc - 4D RADARpc

12” radome 18” radome 20” radome 3.5’ open-array 4.5’ open-array 18” 2kW radome 24” 4kW radome 4’ 6kW open-array 6’ 10kW open-array 18” 2kW radome 24” 4kW radome 12” 2kW radome 20” 2kW radome 24” 4kW radome 4’ 4kW open-array 5’ 4kW open-array 25” 4kW radome 3.5’ / 4.5’ open-array

SC19 SC19 SC21 X X SC19 SC21*** X X SC20 SC21 SC19 SC19 SC21 X X SC21 X

LMB-F2 / A2 LMB-F2 / A2 LMB-F2 / A2 X X LMB-F2 / A2 LMB-A3 X X LMB-F1 / A1 LMB-F1 / A1 LMB-F2 / A2 LMB-F2 / A2 LMB-F2 / A2 X X LMB-F1 / A1 X

LMP-2 LMP-2 LMP-2 X X LMP-2 LMP-3 X X LMP-1 LMP-1 LMP-2 LMP-2 LMP-2 X X LMP-1 X

LMM-2 LMM-2 LMM-2 X X LMM-2 LMM-3 X X LMM-1 LMM-1 LMM-2 LMM-2 LMM-2 X X LMM-1 X

DLMP-2-? DLMP-2-? DLMP-2-? X X DLMP-2-? DLMP-3-? X X DLMP-1-? DLMP-1-? DLMP-2-? DLMP-2-? DLMP-2-? X X DLMP-1-? X

SC103 SC103 SC103 X X SC103 SC103*** X X SC101 SC101 SC103 SC103 SC103** X X SC101 X

SC104 SC104 SC104 X X SC104 SC104*** X X SC102 SC102 SC104 SC104 SC104** X X SC102 X

SC2 SC2 SC2 SC2 SC2 SC2 SC2*** SC2 SC2 SC2 SC2 SC2 SC2 SC2** SC2 SC2 SC2 SC2

PT2005 PT2005 PT2005 X X PT2005 PT2005*** X X PT2004 PT2004 PT2005 PT2005 X X X PT2004 X

PT2002 PT2002 PT2002 X X PT2002 X X X PT2001 PT2001 PT2002 PT2002 X X X PT2001 X

SPT1002 SPT1002 SPT1002 X X SPT1002 X X X SPT1001 SPT1001 SPT1002 SPT1002 SPT1002** SPT1005 SPT1005 SPT1001 SPT1005

APT5U APT5U APT5U APT6002 APT6002 APT5U APT5U*** APT6002 APT6002 APT19000 APT19000 APT5U APT5U APT52S APT6002 APT6002 APT19000 APT6002

APT10U APT10U APT10U X X APT10U APT10U*** X X APT19001 APT19001 APT10U APT10U APT102S APT6002 APT6002 APT19001 X

DPT-SR2-30 DPT-SR2-30 DPT-SR2-30 X X DPT-SR2-30 DPT-SR2-30*** X X DPT-SR1-30 DPT-SR1-30 DPT-SR2-30 DPT-SR2-30 X X X DPT-SR1-30 X

DPT-SR2-40 DPT-SR2-40 DPT-SR2-40 X X DPT-SR2-40 DPT-SR2-40*** DPT-SO2-40 X DPT-SR1-40 DPT-SR1-40 DPT-SR2-40 DPT-SR2-40 X DPT-SO2-40 X DPT-SR1-40 DPT-SO2-40

DPT-SR2-60 DPT-SR2-60 DPT-SR2-60 X X DPT-SR2-60 DPT-SR2-60*** DPT-SO2-60 X DPT-SR1-60 DPT-SR1-60 DPT-SR2-60 DPT-SR2-60 X DPT-SO2-60 X DPT-SR1-60 DPT-SO2-60

T-72.01 T-72.02 T-72.04 T-74.05 T-74.06

12” 2kW radome 20” 4kW radome 20” 4kW radome 3.5’ open-array 4.5’ open-array

SC19 SC21 SC21 X X

LMB-F2 / A2 LMB-F2 / A2 LMB-F2 / A2 X X

LMP-2 LMP-2 LMP-2 X X

LMM-2 LMM-2 LMM-2 X X

DLMP-2-? DLMP-2-? DLMP-2-? X X

SC103 SC103 SC103 X X

SC104 SC104 SC104 X X

SC2 SC2 SC2 SC2 SC2

PT2005 PT2005 PT2005 X X

PT2002 PT2002 PT2002 X X

SPT1002 SPT1002 SPT1002 X X

APT5U APT5U APT5U APT6002 APT6002

APT10U APT10U APT10U X X

DPT-SR2-30 DPT-SR2-30 DPT-SR2-30 X X

DPT-SR2-40 DPT-SR2-40 DPT-SR2-40 X X

DPT-SR2-60 DPT-SR2-60 DPT-SR2-60 X X

Simrad Sitex

X where you see this symbol please contact Scanstrut for advice. * Fit dome back to front. ** Use with adaptor 19041. ***Use with adaptor 19042.

For more details visit www.marinemegastore.com or call 0871 8732404

23

Garmin

Page 22

DLMP-2-? DLMP-2-? DLMP-2-? X X X X

Interphase

Page 26 - 27

LMM-2 LMM-2 LMM-2 X X X X

JRC

Page 20

LMP-2 LMP-2 LMP-2 X X X X

Koden

Page 19

LMB-F2 / A2 LMB-F2 / A2 LMB-F2 / A2 X X X X

Lorenz

Page 19

SC19 SC19 SC21 X X X X

Lowrance

Page 21

15” radome 18” radome 24” radome 3.5’ open-array 4’ open-array 6’ open-array GPS gyro compass

Seiwa

Scanner Type

1621 / 1622 / 1623 1715 / 1824 / 1724 / DRS2D / NavNet 1734 / 1832 / 1834 / DRS4D / NavNet 1932 / 1934 / 851 / 1762 / DRS4A 1942 / 1944 / DRS6A / DRS12A / DRS25A 1954 / DRS12A / DRS25A SC60 / SC120

Furuno

for 60cm sat

Navman

for 40cm sat

Nobeltec

for 30cm sat

Northstar

250mm (10")

Furuno

130mm (5")

Garmin

150mm (6")

Interphase

350mm (14")

JRC

150mm (6")

Koden

1.0m / 3.0m / 4.0m (3.4' / 10' / 13')

Lorenz

2.5m (8.4')

Lowrance

1.9m (6.5')

Navman

Dual Pole ? = satcom

Nobeltec

Mast

Northstar

Pole

Raymarine

Backstay Fwd (F) / Aft (A)

Dual PowerTower®

Raymarine

Stainless PowerTower®

Seiwa

Composite PowerTower®

Simrad

SC2 Pole Mount

Sitex

SC100 Pole Mount

Techmarine

Self-Levelling Radar Mount

Radar Brand & Model

Techmarine

scanstrut.com

Mast Mount

43


Satcom

For more details visit www.marinemegastore.com or call 0871 8732404

Satcom Satcom Antenna Mount

44

Camos

CSA-450 CSA-600

EMS

F55

EPAK

SatCom-Line 60 SatCom-Line 90

Furuno

Fleet 33 / Felcom 30 Fleet 55 / Felcom 50 SC50 [SC303 25” radome]

Intellian

i1 i2 i3 i4 / k4 i6 / i6p / k6 i9 / i9p

JRC

Fleet 33 / JUE 33 JUE-250 Fleet Broadband 250

KNS

Supertrack S3 Supertrack S4 / Z4

KVH

TracVision M2 / M3 TracPhone 252 / TracNet Fleet Broadband 250 (compact) Fleet 33 (non G4 dome) TracPhone 50 TracVision C3 TracVision M5 / F33 / G4 Fleet Broadband 250 (M5 matching) TracVision M7 / F55 / G6 Fleet Broadband 500 / V7 (M7 matching) TracVision M9 / F77 / G8 Fleet Broadband 500 / V7 (M9 matching) TracVision V9 (G8 dome)

Naval

Nav Sat 60

Navisystems

MST 55

Raysat

T5

Raymarine

37STV 45STV 60STV

Simrad

MS33 MS55

Sea-Tel

Coastal 14 Coastal 18 Coastal 24 USAT 24 (06 VSAT Range)

Techmarine

T-20.11 TechSat 39 T-20.12 TechSat 39/3 T-20.13 TechSat 39S T-20.01 TechSat 41 T-20.02 TechSat 41S T-20.03 TechSat 55 T-20.05 TechSat 61

Thrane & Thrane

scanstrut.com

Satcom Guide

Capsat Fleet 33 Capsat Fleet 55 Fleet Broadband 250 [T&T’s own dome] Fleet Broadband 500 [T&T’s own dome]

Pages 12 -13

Satcom PowerTower®

Dual PowerTower®

Aluminium

See radar guide for part no.**

Stainless

Page 10 - 11 Page 10 - 11

Page 14 - 15

Composite PowerTower® 150mm (6")

350mm (14")

Page 8 - 9 Page 8 - 9

Stainless PowerTower® 150mm (6”) Page 8 - 9

Aluminium PowerTower® 130mm (5")

Mast Mount

250mm (10")

Page 8 - 9 Page 8 - 9

SC100 Pole Mount 1.9m (6.5’) / 2.5m (8.4’)

SC2 Pole Mount

Dual Pole Mount

1.0m / 3.0m / 4.0m See radar guide (3.4’ / 10’ / 13’) for part no.**

Page 24

Page 25

Page 25

Page 26 - 27

Product ambassadors, professional racers Scanstrut is proud to support some of the world’s best sailors. Through this close liaison our products are developed, tested and proven in the harshest ocean racing conditions.

SC65 SC65

SATPT-60 SATPT-60

SATPT-60S SATPT-60S

✓ (-60) ✓ (-60)

X X

X X

X X

X X

X X

SC60-3 SC60-3

X X

SC2 (+ SC65) SC2 (+ SC65)

X X

X

SATPT-40

SATPT-40S

✓ (-40)

X

X

X

X

X

SC60-1

X

SC2

X

Scanstrut are supporting Alex in his Class 40 campaign onboard Fujifilm.

SC45 X

SATPT-40 X

SATPT-60S X

✓ (-60) X

X X

X X

X X

X X

X X

SC60-1 X

X X

SC2 (+ SC45) X

X X

Alex has chosen our Self-Levelling Mast Mount for his radar installation (see page 20). This will keep the radar beam level with the horizon at all times, giving the best possible radar picture.

X X X

SATPT-33 SATPT-33 SATPT-40

X X SATPT-40S

✓ (-30)* X ✓ (-60)

PT2006 X PT2005

PT2003 X PT2002

X X SPT1002

X X APT5U

X X APT10U

SC16 SC60-2 SC21

SC105 / SC106 SC103 / SC104 SC103 / SC104

SC2 SC2 SC2

✓ (-30F) X X

✓ (-30)* ✓ (-30)* ✓ (-30 / -40) ✓ (-40) ✓ (-60) X

PT2005 PT2005 PT2004 X X X

PT2002 PT2002 PT2001 X X X

X X X X X X

X X X X X X

X X X X X X

SC19 SC19 SC20 SC40 SC60-1 X

X X SC35 SC45R SC65 X

SATPT-40* SATPT-40S* SATPT-40* SATPT-40S* SATPT-40 SATPT-40S SATPT-40 SATPT-40S SATPT-60 SATPT-60S X X

SC103 / SC104 SC2 SC103 / SC104 SC2 SC101 / SC102 SC2 SC105-45R / SC106-45R SC2 (+ SC45R) X SC2 (+ SC65) X X

SATPT-33 SATPT-33

X X

✓ (-30)* ✓ (-30)*

PT2006 PT2006

PT2003 PT2003

X X

X X

X X

SC16 SC16

SC105 / SC106 SC105 / SC106

SC2 SC2

✓ (-30F) ✓ (-30F)

SC35 SC35

SATPT-40 SATPT-40

SATPT-40S SATPT-40S

✓ (-40) ✓ (-40)

X X

X X

X X

X X

X X

SC40 SC40

X X

SC2 (+ SC35) SC2 (+ SC35)

✓ (-30) ✓ (-30)

SC35 SC31 (+ 19125 seal) SC31* X SC45 X SC45 SC45 SC65 SC65 SC80 SC80 SC80

SATPT-40 X SATPT-33 SATPT-40 SATPT-40 X SATPT-40 SATPT-40 SATPT-60 SATPT-60 X X X

SATPT-40S X X SATPT-40S SATPT-40S X SATPT-40S SATPT-40S SATPT-60S SATPT-60S X X X

✓ (-30 / -40) X X X ✓ (-40) X ✓ (-40) ✓ (-40) ✓ (-60) ✓ (-60) X X X

PT2004 PT2006 PT2006 PT2006 X X X X X X X X X

PT2001 PT2003 PT2003 PT2003 X X X X X X X X X

SPT1001 X X X X X X X X X X X X

SC20 SC16 SC16 SC16 X X SC40 SC40 SC60-1 SC60-1 X X X

SC101 / SC102 SC105 / SC106 SC105 / SC106 SC105 / SC106 X X SC105-45 / SC106-45 SC105-45 / SC106-45 X X X X X

SC2 X SC2 SC2 SC2 (+ SC45) SC2 SC2 (+ SC45) SC2 (+ SC45) SC2 (+ SC65) SC2 (+ SC65) X X X

✓ (-30) ✓ (-30F) ✓ (-30F) ✓ (-30F) X X ✓ (-45) ✓ (-45) X X X X X

SC65

SATPT-60

SATPT-60S

✓ (-60)

X

X

X

X

X

SC60-1

X

SC2 (+ SC65)

X

X

SATPT-60

SATPT-60S

✓ (-60)

X

X

X

X

X

SC60-3

X

X

X

SATPT-60* SATPT-60S*

✓ (-60)*

X

X

X

X

X

SC60

X

SC2 (+ SC65*)

X

SC65 + adaptor*

SC35 SC45R SC65

SATPT-40 SATPT-40 SATPT-60

SATPT-40S SATPT-40S SATPT-60S

✓ (-30 / -40) ✓ (-40) ✓ (-60)

PT2004 X X

PT2001 X X

X X X

X X X

X X X

SC20 SC40 SC60-1

X X

SATPT-33 SATPT-33

X X

✓ (-30)* X

PT2006 X

PT2003 X

X X

X X

X X

SC16 SC60-2

SC105 / SC106 SC103 / SC104

SC2 SC2

✓ (-30F) X

SC35 SC45 SC45 SC45

SATPT-40 SATPT-40 SATPT-40 SATPT-40

SATPT-40S SATPT-40S SATPT-60S SATPT-60S

✓ (-30 / -40) ✓ (-40) ✓ (-60) ✓ (-60)

PT2004 X X X

PT2001 X X X

X X X X

X X X X

X X X X

SC20 SC40 SC60-1 SC60-1

SC101 / SC102 X X X

SC2 SC2 (+ SC45) SC2 (+ SC45) SC2 (+ SC45)

✓ (-30) ✓ (-45) X X

SATPT-33 X SATPT-33 X SATPT-33 X SATPT-33 X SATPT-33 X SATPT-60* SATPT-60S* SATPT-60* SATPT-60S*

✓ (-40)* ✓ (-40)* ✓ (-40)* ✓ (-40)* ✓ (-40)* ✓ (-60)* ✓ (-60)*

X X X X X X X

X X X X X X X

X X X X X X X

X X X X X X X

X X X X X X X

SC40 SC40 SC40 SC40 SC40 SC60 SC60

SC105 / SC106 SC105 / SC106 SC105 / SC106 SC105 / SC106 SC105 / SC106 X X

X X X X X X X

✓ (-30) ✓ (-30) ✓ (-30) ✓ (-30) ✓ (-30) X X

SATPT-33 SATPT-33 SATPT-33 SATPT-40

✓ (-30)* X ✓ (-30)* ✓ (-60)

PT2006 X PT2006 X

PT2003 X PT2003 X

X X X X

X X X X

X X X X

SC16 SC60-2 SC16 SC60-1

SC105 / SC106 SC103 / SC104 SC105 / SC106 X

SC2 SC2 SC2 X

✓ (-30F) X ✓ (-30F) X

X X X X X X X SC31* X SC31* X

X X X SATPT-60S

SC101 / SC102 SC2 SC105-45R / SC106-45R SC2 (+ SC45R) X SC2 (+ SC65)

In addition, Scanstrut has also supplied an innovative camera mounting system onto Fujifilm. This positions waterproof cameras around the boat to capture live footage during offshore races.

✓ (-U) ✓ (-U) ✓ (-30) ✓ (-45R) X X

X X

APT19000 APT19001 X X X X X X X X X X X X X X X X X X X X X X X X

Alex Bennett, Fujifilm

✓ (-30) ✓ (-45R) X

to use at sea. With that in mind, the Self-Levelling Radar Mount from Scanstrut ticked all the boxes when I needed a mounting solution for my 2kW Raymarine radar. Initially looking for just a simple, fixed mounting solution, I was very pleased to discover Scanstrut’s ingenious Self-Levelling system and knew instantly it was the product I should have.

Stern camera mount onboard Fujifilm

For more details visit www.marinemegastore.com or call 0871 8732404

X where you see this symbol please contact Scanstrut for advice. * Product is due to fit antenna early 2009. ** Use number in brackets to confirm part number in radar guide. Please contact Scanstrut for further information.

Reliability, safety and performance are key factors when I look for products

Alex Bennett Skipper of Fujifilm, Class 40 racing yacht. Please contact marketing@scanstrut.com with any sponsorship proposals.

24

” 45

Scanstrut - Scanstrut 2009  

Sailboat Products Accessories Head Office Scanstrut Limited 1 Malt Mill, Totnes, Devon, UK TQ9 5NH Tel: +44(0) 1803 863800 Fax: +44(0) 1803 8...

Read more
Read more
Similar to
Popular now
Just for you