Page 1

For more details visit or call 0871 8732404

For more details visit or call 0871 8732404



For more details visit or call 0871 8732404

UltraBond 10:1

Methacrylate Adhesive Dispensing Unit IMA-CCP-ADH M.V.P.’s new UltraBond unit is the ultimate solution for your methacrylate adhesive material processing needs. Now you can count on simple, accurate metering and mixing (no gear pumps) with this rugged, easy-to-maintain unit. You get double-acting piston pumps for smooth, continuous power, stainless steel transfer pumps, catalyst pump, hoses, gun & fluid sections with air/ solvent flushing.

Output Capabilities Pour: up to 20lb./min (9.07kg/min.) depending on viscosity Catalyst vol.

10% by

Air Requirements CFM

25 - 30

Hose Length Pour: m)

25 ft. (8.5

Shipping Information Width:

86 in. (218 cm)

Featuring the M.V.P. Powerslide power head, the UltraBond delivers a rugged 25:1 power ratio from the 7” power head; the only true low psi power head on the market. Operators will benefit from quick response shifting and a pilot valve operated by line pressure for reliability and ease of use. Modular Rapid Access Design (RAD) means fewer parts for easy maintenance and low maintenance costs. It all happens at the gun: The UltraBond 10:1 dispensing gun is the #1 choice of methacrylate adhesive bonding users. The gun incorporates an easy ratio check feature that assures proper mix every time. In addition, the UltraBond gun also features a “night cap” for protection against accidental crossover. Call today and benefit from the UltraBond gun’s rugged stainless steel, straight-through material flow & 3/4” stainless steel mixer with disposable inserts.

Featuring: The most accurate & reliable metering system made for methacrylate adhesives bonding materials Chop Check Section Double Acting ton Pumps



No Gear Pumps Rugged Stainless Steel UltraBond Gun Stainless Steel Transfer Pumps & Catalyst

If you are bonding with methacrylate adhesives, get the ultimate in dispensing technology with the UltraBond and call M.V.P. today!

For more information, contact:

Official MVP Distributor

MAGNUM VENUS PLASTECH MVP Technology Center MVP - Plastech Facility U.K. Corp HQ/Mfg. 1862 Ives Ave. Chilsworthy Beam, Gunnislake 5148 113th Ave. N. Kent, WA 98032 USA Cornwall, PL18 9AT · U.K. Clearwater, FL 33760 tel: (253) 854-2660 Tel:+44(0) 1822 832 621 tel: (727) 573-2955 fax: (253) 854-1666 Fax: +44(0) 1822 833 999 fax: (727) 571-3636 E-mail: · Web: For more details visit or call 0871 8732404 ©Copyright 2007 by Magnum Venus Plastech. All Rights Reserved.


ML1474 Rev. 02/07

Magnum Venus Plastech-UltraBond 10-to-1 Brochure-ML1474  

For more details visit or call 0871 8732404 1 For more details visit or call 0871 8732404