Addressable Flashing Beacon I-9314 Wiring and Connection Connect the wires to the required terminal according to the wiring diagram. The terminal 13 (Z1), 14 (Z2) is for addressable Loop, non-polarized. The cable must be fire rated type and the size depends on the wiring distance. Minimum recommended size gauge is 1.0mm².
Selection of compatible Control Panels Compatible with all GST Fire Alarms Panels GST 200-2, GST 5000, GST IFP8.
Ordering Information: Part No
I-9314 Z1 Z2
LOOP IN
Description
Addressable Flashing Beacon
Weight /Kg
.166
Pack Qty per Box 100
LOOP OUT
Programming The address and setting of the flashing beacon can be programmed using GST handhold programmer (P-9910), purchased separately. Connect the two wires of the handheld programmer to terminals 13 and 14 of the device. See Addressable Flashing Beacon manual for more programming information.
1 2 3
4
5
6
7
8
16 15 14 13 12 11 10 9
Z1 (14) AND Z2 (15) TERMINAL
FIELD DEVICE PROGRAMMER
MANUFACTURED IN ACCORDANCE WITH
Note: Specifications are subject to change without notice.