Issuu on Google+

THERMAL IMAGING IN PLASTICS

In close co-operation with FLIR Australia, UltraCool3D are delighted to share these few case studies.


WARPAGE, CYCLE TIME, TOLERANCES •

Most plant engineers have spent endless hours in trying to control Warpage.

Many hours were spent on meeting tolerances of part.

Even after all efforts in good faith residual stress in parts made part unacceptable in field service, this could damage your brand.

Confidential, Patent Pending

© Ultra Cool 3D 2011

www.ultracool3d.com


Case 1

IR Image of PA66GF automotive moulding.

Very high temperature range leading to warpage and function and fit issues.

Confidential, Patent Pending

© Ultra Cool 3D 2011

www.ultracool3d.com


Case 2

IR Image of an automotive electronics housing.

Very high temperature range leading to warpage, function and fit issues.

Confidential, Patent Pending

© Ultra Cool 3D 2011

www.ultracool3d.com


Case 3 Confidential, Patent Pending

Limitation of cooling in tool shows up instantly on a simple IR image. Far more effective than single point pyrometers used.

Š Ultra Cool 3D 2011

www.ultracool3d.com


Case 4

Automotive AIM

•

Excessive temperature variation, long cycle time, warpage.

Confidential, Patent Pending

Š Ultra Cool 3D 2011

www.ultracool3d.com


Rigid Packaging Success Story

Case 5

Husky Analysis, 12.6 sec. Cycle time

Confidential, Patent Pending

Š Ultra Cool 3D 2011

www.ultracool3d.com


Rigid Packaging Tool Diagnostic

Case 6

Blocked cooling channel, product quality issues.

Confidential, Patent Pending

Š Ultra Cool 3D 2011

www.ultracool3d.com


A thermal camera can help

Substantially reduce cycle times

Improve part quality • Reduce molded-in stresses and warpage • Control process drift, Monitor Tool Condition • Shorten new tool commissioning time

Sustainability • Reduced energy & material consumption • Get ready to minimize your carbon tax

Confidential, Patent Pending

© Ultra Cool 3D 2011

www.ultracool3d.com


Mission Statement

At UltraCool3D and FLIR we are dedicated to bringing innovative technological solutions to industry in a manner that will set new standards of quality and service. We, in our humble way, will help reduce carbon footprint that our industry leaves behind. This will lead to more profit for our customers and have lasting impact on our planet.

Jayesh Modi Managing Director Ultra Cool 3D

Roger Christiansz

Managing Director FLIR Australia

Confidential, Patent Pending

Š Ultra Cool 3D 2011

www.ultracool3d.com


Good cooling is not optional‌

Kheang Khauv Sales Manager - VIC/TAS Office: (03) 9550 2800 Kheang.Khauv@flir.com.au www.flir.com

Jayesh Modi +61-410-095-160 Jayesh@UltraCool3D.com www.ultracool3d.com

Confidentiality Note: Intellectual property protection is sought for various stages of our products, they are protected under various patents in various stages of application. No part of this presentation or technologies described herein may be copied, reproduced without express written permission of its proprietors UltraCool3D. Confidential, Patent Pending

Š Ultra Cool 3D 2011

www.ultracool3d.com


/Thermal-Imaging-In-plastics-FLIR-ppt-new-