Page 1

Project Name, Part No., Drawing No.

Section A

Part data (upto 3 thicknesses)

Process requirement Tool data

Coolant detail

Your process target if known

Resin Properties

Part Thickness,L p


Nominal Length (mm) Nominal width (mm) Nominal Height (mm) Part weight Maximum mid plane temperature Maximum part thickness average temperature Tool material Cooling channel width (W) Mold wall thickness (l m ) Water, oil, steametc. Water pressure (for high pressure water RTC application) Thickness averaged eject temp. Temp. Midplane Inject (Exclude pack time) M/c open time Eject and part removal M/c close time Injection Pressure Resin, grade Density plastic Specific heat of plastic Thermal conductivity of plastic material Melt temp. Working temp. mould surface Temp. mid plane of part for safe ejection Cte, ISO 11359-1/-2


Section C

Section E

Componnet/ Tool data, upload FTP details:

mm mm mm Deg. C

Thermal images of part/ similar part:

Deg. C gm mm mm


Any known quality issues:

deg C deg C sec sec sec sec Mpa IMPORTANT DISCLAIMER:This simulation service will be provided in good faith by UltraCool3D utilising best available information. However, no representation is made as to the completeness or accuracy of the estimations it will provide. In particular, you should be aware that the report may be incomplete, may contain errors or may have become out of date. UltraCool3D makes no commitment, and disclaims any duty and all services will be provided "as is" without any warranty or implied term of any kind. Cycle time quoted will not be binding unless specifically agreed by UltraCool3D. It will be entirely upto you, the customer to arrive at applicability in you business. Reproduction or distribution of any materials obtained from supplied reports without written permission is prohibited.

kg/m3 J/kg-°C W/m-K Deg. C Deg. C Deg. C ppm/ºC

Date Contact details:



Plant Location

+61 410 95 160

Contact Person

Phone, E-mail