Mainline Product Catalogue - January 2020 (Current)

Page 1

Product Catalogue January 2020

The perfect colour match

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk


Company Information Company Information ABOUT US Originally established in 1991, Mainline Products (UK) Ltd is an independent fastener, profile and accessories supplier to the Rainscreen Façade industry. We specialise in coating fasteners and profiles to accurately match manufacturers’ façade panels. HOW TO USE THIS CATALOGUE

Please view our catalogue as a useful guide for appropriate manufacturers fasteners, and accessories. We have endeavoured to reproduce all our technical information faithfully, but would request you liaise with appropriate panel manufacturers fixing and installation guidelines prior to ordering from Mainline Products UK Ltd, as we are unable to accept responsibility for any incorrect specifying of product. The data and information provided in this catalogue is believed to be accurate and is reproduced in good faith. It is the customer's responsibility to ensure that the product or installation method described in this catalogue is suitable for the specific application. Mainline Products (UK) Ltd disclaim any and all liability for any errors, inaccuracies or incompleteness contained in this catalogue. In addition, Mainline Products (UK) Ltd makes no warranty, representation or guarantee regarding the suitability of the product described by the catalogue for any particular or associated purchase. The catalogue is also available as a PDF on request.

COATINGS AND SPECIAL FINISHES

Our coatings and finishes have been independently tested to European and International standards, and we can now offer a 25 year warranty on our coloured parts. We stand alone in our ability to colour match to any manufacturers panels and industry finishes, from solid colours, wood grains, metallic, sparkling metallic, anodised, zin, copper and our latest development, chameleon multi-tonal colours that have the ability to change colour seamlessly with the panel. PAINT SET-UP COSTS & COLOUR MATCHING

A paint set-up cost of £90.00 is applicable to all non-standard colours. .There is no set up charge for the Standard RAL colours which are RAL 1013, 1015, 3004, 3007, 3009, 5011, 6009, 7001, 7004, 7016, 7021, 7022, 7030, 7031, 7035, 7037, 8028, 9001, 9005, and 9010. If a non-standard paint is already in stock, then there are no set up charges applicable. Façade panels may be directional or differ in tone from batch to batch and can also show variance in the same colour. It is at the discretion of the client to satisfy themselves that our colour match is acceptable prior to installation. Mainline Products (UK) Ltd are unable to accept liability or offer compensation in this situation. SAMPLING

Mainline Products (UK) Ltd are unique in being able to provide a ‘try before you buy’ sampling service. All we require is the panel type and colour reference or a small sample panel. Within a few days we will be able to produce coated fasteners or profile samples ready for your client’s approval. ORDERING

Orders can be undertaken by Email: sales@mainlineproducts.co.uk. We accept all major credit and debit cards. Credit accounts are available depending on credit references. DELIVERY CHARGES FOR FIXINGS AND SMALL BOX ITEMS

The majority of our products are available from stock, however we require at least 3 to 4 working days from date of order for coated fixings. Orders with a value of £300 and above will be delivered free of charge to the UK. Orders under £300 will have a £16.00 charge applied to the order – additional carriage charges may apply when delivering to Highlands and other parts of Scotland & Ireland. If you would like a delivery outside the UK please contact our sales office on +44 (0)1782 629 270. DELIVERY CHARGES FOR PROFILES

Our Profiles delivery charges are as follows – Orders above £300 are delivered free of charge. Orders under £300 carry a delivery charge of £75.

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t:+44(0)1782 629 270 +44 (0) 1782 629 270 e: sales@mainlineproducts.co.uk  sales@mainlineproducts.co.uk w: mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Contents Page 1

Contents Panel Manufacturer Fixing and Accessories

Fixings and Accessories

High Pressure Laminates

Façade Anchors – A4 Stainless Steel

Trespa

3

Façade Anchors X3

41

Parklex

4

Anchors SD/KB

42

Formica

5

Fundermax

6

Prodema

7

Stone & Fibre Cement & Weatherboard

Façade Screws Stainless Steel Austenitic S/S Low Profile Façade Screws

43

Austenitic S/S Hex Head Façade Screws

46

Bi Metallic S/S Low Profile Façade Screws

47

Bi Metallic S/S Hex Head Façade Screws

50

Cembrit

9

Ceramapanel

13

Petrarch

14

Wienerberger SVK

16

Large Flange Rivets Aluminium/Stainless

54

Swisspearl

17

120°Csk Rivets Aluminium/Stainless

56

Marley Equitone

18

James Hardie

20

James Hardie Weather Board

22

Large Flange Stainless/Stainless

57

Fundermax m.look

23

Bulb Tite Rivets

59

Weatherboard Accessories Profiles & Accessories for Weatherboard

Façade Rivets All A2 Stainless

Tapes and Gaskets 24

Mineral Rock Fibre Rockpanel

Façade Rivets Aluminium Stainless

EPDM Finned Gasket Tape

60

PVC Shadow Line Tape

60

Blackout/Anti Rattle Tape

60

27 Profile and Vents

Concrete and Stone Fibre C, Concrete Skin and OKO Stone

29

Aluminium and ACM

PVC Vent Profile

61

Aluminium Vent Profile

62

PVC Profiles

63

Aluminium Profiles

64

Solid Aluminium

30

Alucobond

32

Alupanel

34

HSS Step Drills

66

Larson & Larcore

36

Carbide Drills

66

Vitrabond & Vitracore

38

Standard Ground HSS Drills

67

Long Ground HSS Drills

68

Cutting Tools

Coating Details Coating Warranty & Test Certificate

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

69

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings for High for Pressure LaminateLaminate Panels Panels Fixings High Pressure 2

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings Accessories for Trespa HPL Panels Fixings and Accessories forand Trespa HPL Panels 3

Timber Fix – 8.0mm Sliding Point – No Fixed Point Product

Code

Application

SWLP 4.8 x 38

6, 8 & 10mm Panels A2 Stainless Steel low-profile screw with a 12mm Head and a woodscrew thread To face fix panels to timber

CT7549-STEP

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the timber behind the panel

CT-STEP-049030

Replacement drill bit For the centralising tool

Aluminium Sub Frame Rivet Fix – 10.0mm Sliding Point – 5.1mm Fixed Point Product

Code

Application

SSAL5/5.0 x 18 x 16

6 & 8mm Panels 5.0 x 18 x 16mm head rivet Grip range of 8.0 - 14mm AlMg5 aluminium body – Stainless Mandrel

SSAL5/5.0 x 25 x 16

10 & 13mm Panels only 5.0 x 25 x 16mm head rivet Grip range of 12.5 – 18.0mm AlMg5 aluminium body – Stainless Mandrel

CT9551

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool

RT/ACB/NP/K16

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051010

Step Drill One step site drill bit for 10.0mm hole in panels and 5.1mm hole in the aluminium rail

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Parklex Panels Fixings and Accessories forHPL Parklex HPL Panels 4

Timber Fix – 8.0mm Sliding Point – 4.9mm Fixed Point Product

Code

Application

SWLP 4.8 X 38

6, 8 & 12mm Panels A2 Stainless Steel low-profile screw with a 12mm Head and a woodscrew thread To face fix panels to timber

CT7549-STEP

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the timber behind the panel

CT-STEP-049030

Replacement drill bit For the centralising tool

Aluminium Sub Frame Rivet Fix – 9.0mm Sliding Point – 5.1mm Fixed Point Product

Code

Application

SSAL5/5.0 x 18 x 16

6 & 8mm Panels only 5.0 x 18 x 16mm head rivet Grip range of 8.0 - 14mm AlMg5 aluminium body – Stainless Mandrel

SSAL5/5.0 x 25 x 16

12mm Panels only 5.0 x 25 x 16mm head rivet Grip range of 12.5 – 18.0mm AlMg5 aluminium body – Stainless Mandrel

CT8551

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool

RT/ACB/NP/K16

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051090

Step Drill One step site drill bit for 9.0mm hole in panels and 5.1mm hole in the aluminium rail

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixingsfor and Accessories for Formica HPL Panels Fixings and Accessories Formica HPL Panels 5

Timber Fix – 7.0mm Sliding Point – 4.9mm Fixed Point Product

Code

Application

SWLP 4.8 x 38

6, 8 & 10mm Panels A2 Stainless Steel low-profile screw with a 12mm Head and a woodscrew thread To face fix panels to timber

CT6549-STEP

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the timber behind the panel

CT-STEP-049030

Replacement drill bit For the centralising tool

Aluminium Sub Frame Rivet Fix – 7.0mm Sliding Point – 4.9mm Fixed Point Product

Code

Application

SSAL 4.8 x 18 x 16

6 & 8mm Panels only 4.8 x 18 x 16mm head rivet Grip range of 6.5 – 12.5mm Aluminium body – Stainless Mandrel

SSAL 4.8 x 23 x 16

10mm Panels only 4.8 x 23 x 16mm head rivet Grip range of 11 – 19.5mm Aluminium body – Stainless Mandrel

CT6549

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-4.9

Replacement drill bit For the centralising tool

RT/ACB/NP/K16

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-049070

Step Drill One step site drill bit for 7.0mm hole in panels and 4.9mm hole in the aluminium rail.

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Fundermax HPL Panels Fixings and Accessories for Fundermax HPL Panels 6

Timber Fix – 8.0mm Sliding Point – 6.0mm Fixed Point Product

Code

Application

SWLP 4.8 x 38

6, 8 & 10mm Panels A2 Stainless Steel low-profile screw with a 12mm Head and a woodscrew thread To face fix panels to timber

CT7549-STEP

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the timber behind the panel

CT-STEP-049030

Replacement drill bit For the centralising tool above

Aluminium Sub Frame Rivet Fix – 8.5mm Sliding Point – 5.1mm Fixed Point Product

Code

Application

SSAL5/5.0 x 18 x 16

6, & 8mm Panels 5.0 x 18 x 16mm head rivet Grip range of 8.0 - 14mm AlMg5 aluminium body – Stainless Mandrel

SSAL5/5.0 x 25 x 16

10mm Panels only 5.0 x 25 x 16mm head rivet Grip range of 12.5 – 18.0mm AlMg5 aluminium body – Stainless Mandrel

CT8051

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/K16

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051085

Step Drill One step site drill bit for 8.5mm hole in panels and 5.1mm hole in the aluminium rail

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories Prodema HPL Panels Fixings and Accessories for Prodema HPLfor Panels 7

Timber Fix – 8.0mm Sliding Point – 4.9mm Fixed Point Product

Code

Application

SWLP 4.8 x 38

6, 8 & 12mm Panels A2 Stainless Steel low-profile screw with a 12mm Head and a woodscrew thread To face fix panels to timber

CT7549-STEP

Centralising Tool Used on pre-drilled panelto ensure a concentric hole is drilled in the timber behind the panel

CT-STEP-049030

Replacement drill bit For the centralising tool above

Aluminium Sub Frame Rivet Fix – 9.0mm Sliding Point – 5.1mm Fixed Point Product

Code

Application

SSAL5/5.0 x 18 x 16

6 & 8mm Panels only 5.0 x 18 x 16mm head rivet Grip range of 8.0 - 14mm AlMg5 aluminium body – Stainless Mandrel

SSAL5/5.0 x 25 x 16

12mm Panels only 5.0 x 25 x 16mm head rivet Grip range of 12.5 – 18.0mm AlMg5 aluminium body – Stainless Mandrel

CT8551

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/K16

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051090

Step Drill One step site drill bit for 9.0mm hole in panels and 5.1mm hole in the aluminium rail

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for Stone & Fibre Cement Panels 8 for Stone & Fibre Cement Panels

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for Cembrit Fibre Cement Panels 9 for Cembrit Fibre Cement Panels Steel Sub-Frame Screw Face Fix – 8.0mm Sliding Point – No Fixed Point 8mm Panels - Cembrit Cover, Cembrit Solid, Cembrit Transparent & Patina (no gasket with Patina) Product

Code

Application

SWLP/SD 4.9 x 35 BI

A Self drilling Bi Metallic Stainless-Steel low-profile screw with a 12mm Head.

Timber Screw Face Fix – 8.0mm Sliding Point – No Fixed Point 8mm Panels - Cembrit Cover, Cembrit Solid, Cembrit Transparent & Patina (no gasket with Patina) Product

Code

Application

SWLP 4.8 X 25S

A2 Stainless Steel low-profile screw with a 12mm Head and a woodscrew thread To face fix panels to timber

SWLP 4.8 X 38S

A2 Stainless Steel low-profile screw with a 12mm Head and a woodscrew thread To face fix panels to timber

Self Drill Timber Screw Face Fix – No Sliding Point – No Fixed Point 8mm Panels - Cembrit Cover, Cembrit Solid, Cembrit Transparent & Patina (no gasket with Patina) Product

Code

Application

SWLP 4.8 x 38 /W

A2 Stainless Steel low-profile screw with a 12mm Head, a woodscrew thread and wings on the shank of the screw to create an oversized hole in the panel To face fix panels to timber

Accessories R-GAS-LOCKRIB

Gasket To be used in conjunction with the above screws on all Cembrit Panels except for Patina -

CT7549-STEP

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the timber behind the panel

CT-STEP-049030

Replacement drill bit For the centralising tool above

CAR080079

Carbide Drill Bit For drilling panel sliding points holes on site 8.0mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for Cembrit Fibre Cement Panels 10 for Cembrit Fibre Cement Panels Aluminium Sub-Frame Rivet Face Fix – 9.0mm Sliding Point – 4.1mm Fixed Point Product

Code

Application

SSAL 5/4.0 x 18 x 15

8mm Panels 4.0 x 18 x 15mm Head Rivet Grip Range 8.0 – 13.0mm AlMg5 Aluminium Body – Stainless Mandrel

SSAL 5/4.0 x 25 x 15

For longer grip range requirements 4.0 x 25 x 15mm Head Rivet Grip Range 12.0 – 18.0mm AlMg5 Aluminium Body – Stainless Mandrel

R-GAS-40113-EPDM

Gasket For above rivets when installing Cembrit Cover, Solid and Transparent – No Gasket required for Cembrit Patina

SPACBUSH-Cembrit

Rivet Bush 8.8 Dia x 6.0mm Long x 4.1mm Spacer Bush – Aluminium In some circumstances, this item is not required, please contact Cembrit who will advise.

Accessories CT8541

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG 4.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/M/K15

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR041055

Carbide Drill Bit For drilling panel fixed point holes on site 4.1mm diameter

CAR090084

Carbide Drill Bit For drilling panel sliding points holes on site 9.0mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for Cembrit Fibre Cement Panels 11 for Cembrit Fibre Cement Panels Steel Sub-Frame Rivet Face Fix – 8.0mm Sliding Point – 4.1mm Fixed Point Product

Code

Application

SSSS 4.0 x 18 x 15

8mm Panels 4.0 x 18 x 15mm Head Rivet Grip Range 8.0 – 13.0mm A2 Stainless Body & Mandrel

SSSS 4.0 x 25 x 15

For longer grip range requirements 4.0 x 25 x 15mm Head Rivet Grip Range 12.0 – 18.0mm A2 Stainless Body & Mandrel

R-GAS-40113-EPDM

Gasket For above rivets when installing Cembrit Cover, Solid and Transparent – No Gasket required for Cembrit Patina

Accessories CT7541

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG 4.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/M/K15

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR041055

Carbide Drill Bit For drilling panel fixed point holes on site 4.1mm diameter

CAR08079

Carbide Drill Bit For drilling panel sliding points holes on site 8.0mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for Cembrit Fibre Cement Panels 12 for Cembrit Fibre Cement Panels Steel Sub-Frame Rivet Face Fix – 8.0mm Sliding Point – 4.9mm Fixed Point Product

Code

Application

SSSS/MG 4.8 x 20 x 16

8mm Panels 4.8 x 20 x 16mm Head Rivet Grip Range 9.0 – 16.0mm A2 Stainless Body & Mandrel

R-GAS-48113-EPDM

Gasket For above rivets

Accessories CT7549

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG 4.9

Replacement drill bit For the centralising tool above

RT/ACB/NP/M/K16

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR049062

Carbide Drill Bit For drilling panel fixed point holes on site 4.9mm diameter

CAR08079

Carbide Drill Bit For drilling panel sliding points holes on site 8.0mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


and Accessories for Ceramapanel Fixings and Accessories Fixings for Ceramapanel 13

Timber Fix – 9.5mm Sliding Point – 4.9mm Fixed Point Product

Code

Application

SWLP 4.8 x 38 x 14mm

8mm Panels A2 Stainless Steel low-profile screw with a 14mm Head and a woodscrew thread To face fix panels to timber

Aluminium Sub-Frame Rivet Face Fix – 9.5mm Sliding Point – 5.1mm Fixed Point 8mm & 12mm Panels Product

Code

Application

SSAL5/5.0 x 18 x 16

8mm Panels 5.0 x 18 x 16mm head rivet Grip range of 8.0 - 14mm AlMg5 aluminium body – Stainless Mandrel

SSAL5/5.0 x 25 x 16

12mm Panels 5.0 x 25 x 16mm head rivet Grip range of 12.5 – 18.0mm AlMg5 aluminium body – Stainless Mandrel

CT9051

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG 5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/K16

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR051062

Carbide Drill Bit For drilling panel fixed point holes on site 5.1mm diameter

CAR095084

Carbide Drill Bit For drilling panel sliding points holes on site 9.5mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Petrarch Panels Panels Fixings and Accessories for Petrarch 14

Timber Fix – 9.5mm Sliding Point – 4.9mm Fixed Point Product

Code

Application

SWLP 4.8 x 38 x 14

7 & 10mm Panels A2 Stainless Steel low-profile screw with a 14mm Head and a woodscrew thread To face fix panels to timber

CT9049-STEP

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the timber behind the panel

CT-STEP-049030

Replacement drill bit For the centralising tool above

CAR-049062

Carbide Drill Bit For drilling panel fixed point holes on site 4.9mm diameter

CAR-095084

Carbide Drill Bit For drilling panel sliding points holes on site 9.5mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for Petrarch Panels for Petrarch Panels 15

Aluminium Sub Frame Rivet Fix – 9.5mm Sliding Point – 4.9mm Fixed Point Product

Code

Application

SSAL 4.8 x 18 x 16

7.0mm Panels only 4.8 x 18 x 16mm head rivet Grip range of 6.5 – 12.5mm Aluminium body (AlMg 2.5)– Stainless Mandrel

SSAL 4.8 x 23 x 16

10mm Panels only 4.8 x 23 x 16mm head rivet Grip range of 11.0 – 19.5mm Aluminium body (AlMg 2.5) – Stainless Mandrel

CT9049

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG 4.9

Replacement drill bit For the centralising tool above

RT/ACB/NP/K16

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR-049062

Carbide Drill Bit For drilling panel fixed point holes on site 4.9mm diameter

CAR-095084

Carbide Drill Bit For drilling panel sliding points holes on site 9.5mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Wienerberger SVK Fixings and Accessories 16 Cement Panel Fibre for Wienerberger SVK Fibre Cement Panel Timber Fix – 6.5mm Sliding Point – No Fixed Point 8mm 10mm

Ornimat, Decoboard, Puro Plus, Colormat & Colour Plus Colormat Brando

Product

Code

Application

SWLP 4.8 x 38

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

CAR65070

Carbide Drill Bit For drilling panel sliding points holes on site 6.5mm diameter

Aluminium Sub-Frame Rivet Face Fix – 6.5mm Sliding Point – 5.0mm Fixed Point 8mm 10mm Product

Ornimat, Decoboard, Puro Plus, Colormat & Colour Plus Colormat Brando Code

Application

SSAL 4.8 x 18 x 16

8mm Panels 4.8 x 18 x 16mm Head Rivet Grip Range 6.5 - 12.5mm Aluminium body (AlMg 2.5)– Stainless Mandrel

SSAL 4.8 x 23 x 16

10mm Panels 4.8 x 23 x 16mm Head Rivet Grip Range 11.0 – 19.5mm Aluminium body (AlMg 2.5)– Stainless Mandrel

RT/ACB/NP/K16

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR50062

Carbide Drill Bit For drilling panel fixed point holes on site 5.0mm diameter

CAR65070

Carbide Drill Bit For drilling panel sliding points holes on site 6.5mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for Swisspearl 17 Fibre Cement Panel for Swisspearl Fibre Cement Panel Timber Fix – All holes 5.5mm 8mm Panels – Nobilis, Zenor, Carat, Reflex, Avera, Incora & Kandor 12mm Panels – Nobilis, Carat & Reflex Product

Code

Application

SWLP 4.8 x 38

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

CAR-055066

Carbide Drill Bit For drilling panel sliding points holes on site 5.5mm diameter

Aluminium Sub-Frame Rivet Face Fix – 9.5mm Sliding Point – 4.1mm Fixed Point 8mm 12mm Product

Carat, Reflex, Avera, Incora, Nobilis, Texial Carat, Reflex, Avera, Nobilis Code

Application

SSAL 5/4.0 x 18 x 15

8mm Panels 4.0 x 18 x 15mm Head Rivet Grip Range 8.0 – 13.0mm AlMg5 Aluminium Body – Stainless Mandrel

SSAL 5/4.0 x 25 x 15

12mm Panels 4.0 x 25 x 15mm Head Rivet Grip Range 12.0 – 18.0mm AlMg5 Aluminium Body – Stainless Mandrel

CT9041

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG 4.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/M/K15

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR041022

Carbide Drill Bit For drilling panel fixed point holes on site 4.1mm diameter

CAR095084

Carbide Drill Bit For drilling panel sliding points holes on site 9.5mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Marley Equitone Fixings and Accessories 18 Cement Panels Fibre for Marley Equitone Fibre Cement Panels Timber Fix – All holes 7.0mm 8mm & 12mm Panels Tectiva, Materia, Natura, Natura Pro Coated, Pictura, Pictura Pro Coated and Textura Product

Code

Application

SWLP 5.5 x 35 x 16mm

A4 Stainless Steel low-profile screw 16mm Head and a woodscrew thread To face fix panels to timber

MARCYL

Screw Sleeve A Stainless-Steel Sleeve for all holes on Pictura Pro Coated and Natura Pro Coated.

CT6549-STEP

Centralising Tool Used on pre-drilled panel to ensure a concentric hole is drilled in the timber behind the panel

CT-STEP-049030

Replacement drill bit For the centralising tool above

CAR70074

Carbide Drill Bit For drilling sliding point holes on site 7.0mm Diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories for Marley Equitone Fixings and Accessories 19 Fibre Cement Panels for Marley Equitone Fibre Cement Panels Aluminium Sub-Frame Rivet Face Fix – All holes 11mm 8mm Panels - Tectiva, Materia, Natura, Natura Pro Coated, Pictura, Pictura Pro Coated and Textura 12mm Panels - Materia, Natura, Natura Pro Coated, Pictura, Pictura Pro Coated and Textura Product

Code

Application

SSAL 5/4.0 x 18 x 15

8mm Panels 4.0 x 18 x 15mm Head Rivet Grip Range 8.0 – 13.0mm AlMg5 Aluminium Body – Stainless Mandrel

SSAL 5/4.0 x 25 x 15

12mm Panels 4.0 x 25 x 15mm Head Rivet Grip Range 12.0 – 18.0mm AlMg5 Aluminium Body – Stainless Mandrel

SPACEBUSH08-GREEN SPACEBUSH08-RED

8mm Panels Green Bush08 for all Rivets - Red Bush08 to go over the Green Bushes on 2 fixed points only

SPACEBUSH12-GREEN SPACEBUSH12-RED

12mm Panels Green Bush12 for all Rivets - Red Bush12 to go over the Green Bushes on 2 fixed points only

GAS/FLT/SA/ASTRO

Single sided foam tape 9mm x 15 Metres x 5mm thick. The 5mm thick tape is used on the Subframe Rails to hold the panel in place. The Bushes protrude beyond the panel thickness by approximately 2mm. When the Rivet is pulled the tape compresses to 2mm to bridge the gap between the panel, bushes and rail/tape, giving a flush fit

CT10541

Centralising Tool Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG 4.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/M/K15

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR110095

Carbide Drill bit This drill bit is designed especially for drilling fibre cement material, unlike standard drill bits they will not burn out and cut a clean, non-flaking hole in the panel 11mm diameter - For drilling holes on site

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for James Hardie Cement Panels 20 for James Hardie Cement Panels Timber Fix – HardiePanel Cladding does not require pre-drilling 8mm Panels – HardiePanel ColourPlus, PrimePlus. Product

Code

Application

SWLP 4.8 x 38

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

ANR30050SS

A2 Stainless Steel Annular Ring Shank Nails 3.0 X 50mm Annular Ring Shank Nails Can be Painted if necessary

Metsec/Steel Sub Frame does not require pre-drilling 8mm Panels - HardiePanel ColourPlus, PrimePlus. Product

Code

Application

SWLP/SDM/5.5 X 25 BI

A2 Bi Metallic Low-Profile Screw 12mm Head and self-drilling tip to Face Panels to Metsec/Steel Sub-frame ECT 1.2 – 8.0mm – Drive T25

SWLP/SDM/5.5 X 35 BI

A2 Bi Metallic Low-Profile Screw 12mm Head and self-drilling tip to Face Panels to Metsec/Steel Sub-frame ECT 1.2 – 18.0mm – Drive T25

SWLP/SDM/5.5 X 25 BI /S12

A2 Bi Metallic Low-Profile Screw 12mm Head and self-drilling tip to Face Panels to Metsec/Steel Sub-frame Complete with S12 Washer ECT 0.0 – 7.0 – Drive T25

SWLP/SDM/5.5 X 35 BI /S12

A2 Bi Metallic Low-Profile Screw 12mm Head and self-drilling tip to Face Panels to Metsec/Steel Sub-frame Complete with S12 Washer ECT 0.0 – 17.0 – Drive T25

ECT = Effective Clamping Tolerance

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for James Hardie Cement Panels 21 for James Hardie Cement Panels Aluminium Subframe Rivet Fix – 9.0mm Sliding Point 5.1mm Fixed Point 8mm Panels – HardiePanel ColourPlus, PrimePlus. Product

Code

Application

SSAL5/5.0 x 18 x 14

5.0 x 18 x 14mm head rivet Grip range of 8.0 - 14mm AlMg5 aluminium body – Stainless Mandrel

CT8551

Centralising Tool Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/RP/K14

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR51062

Carbide Drill Bit For drilling panel fixed point holes on site 5.1mm diameter

CAR090084

Carbide Drill Bit For drilling panel sliding points holes on site 9.0mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings for James Fixings forHardie JamesWeatherboard Hardie Weatherboard 22

Timber Fix – HardiePlank Cladding does not require pre-drilling 8mm Weatherboard - HardiePlank Product

Code

Application

SWLP 4.8 x 38

A2 Stainless-Steel Low-Profile Screw 12mm Head and a woodscrew thread To face fix panels to timber

Aluminium Subframe Screw Fix – HardiePlank Cladding does not require pre-drilling 8mm Weatherboard - HardiePlank Product

Code

Application

SWLP/SD/4.8 x 25/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium ESL 15mm

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixingsforand Accessories for Fundermax m.look Fixings and Accessories Fundermax m.look 23 Reinforced Reinforced Glass Fibre Mineral Panels Glass Fibre Mineral Panels Aluminium Sub Frame Rivet Fix – 8.5mm Sliding Point – 5.1mm Fixed Point 7mm Panels – m.look Product

Code

Application

SSAL5/5.0 x 18 x 14

7mm Panels. 5.0 x 18 x 14mm head rivet Grip range of 8.0 x 14mm AlMg5 aluminium body – Stainless Mandrel

CT8051

Centralising Tool Used on pre-drilled panel to ensure a concentric hole is drilled in the timber behind the panel

CT-HDRLG 5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/RP/K14

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR-51062

Carbide Drill Bit For drilling panel fixed point holes on site 5.1mm diameter

CAR-85079

Carbide Drill Bit For drilling panel sliding points holes on site 8.5mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk  sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Weatherboard Lap Fixings and Accessories for Weatherboard Lap 24 PRF/AL/LAP/SC Symmetrical Corner

PRF/AL/LAP/AC Asymmetric Corner

PRF/AL/LAP/IC Internal Corner

PRF/AL/LAP/ECJ External Corner Junction

3.0 Metre Length

3.0 Metre Length

3.0 Metre Length

300mm Length

PRF/AL/LAP/VJ Vertical Joint Profile

PRF/AL/LAP/SP Start Profile

PRF/AL/LAP/CLK/EP End Profile

PRF/AL/LAP/CLK/CP Connection Profile

3.0 Metre Length

3.0 Metre Length

3.0 Metre Length

3.0 Metre Length

VP30040MF Perforated Vent 30 x 40

VP30050MF Perforated Vent 30 x 50

VP30070MF Vent 30 x 70 Mill Finish

VP30100MF Vent 30 x 100 Mill Finish

2.5 Metre Length

2.5 Metre Length

2.5 Metre Length

2.5 Metre Length

ANR 2.65 x 50 Annular Ring Nail

US-SQ 4.0 x 45 SS Csk Square Drive A2 S/S

SWLP 4.8 X 38 / W Low Profile A2 SS Screw

CAR-030046 Carbide Drill – 3.0mm

Box of 100

Box of 100

Box of 100

1 Drill

GAS/FIN 36mm & 60mm Gasket

TUP-030-SCB 30ml Touch Up Paint

TUP-400-SCA 400ml Aerosol Paint

TUP-500-SCT 500ml Touch Up Paint

1 Roll

1 Pot

1 Tin

1 Tin

Coming Soon

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings for andWeatherboard Accessories for Weatherboard Click Fixings and Accessories Click 25 PRF/AL/CLK/SC Symmetrical Corner

PRF/AL/CLK/IC Internal Corner

PRF/AL/CLK/ECJ External Corner Junction

3.0 Metre Length

3.0 Metre Length

300mm Length

3.0 Metre Length

PRF/AL/CLK/VSP Vertical Start Profile

PRF/AL/LAP/CLK/EP End Profile

PRF/AL/LAP/CLK/CP Connection Profile

PRF/AL/CLK/WL Window Lintel Profile

3.0 Metre Length

3.0 Metre Length

3.0 Metre Length

3.0 Metre Length

VP30040MF Perforated Vent 30 x 40

VP30050MF Perforated Vent 30 x 50

VP30070MF Vent 30 x 70 Mill

VP30100MF Vent 30 x 100 Mill Finish

2.5 Metre Length

2.5 Metre Length

2.5 Metre Length

2.5 Metre Length

ANR 2.65 x 50 SS Annular Ring Nail

US-SQ 4.0 x 45 SS Csk Square Drive

Box of 100

Box of 100

CLICK/CLIP001 Screw and Clip Set

TUP-030-SCB 30ml Touch Up Paint

Box of 250

1 Pot

SWLP 4.8 X 38 / W Low Profile A2 SS Screw

PRF/AL/CLK/SP Start Profile

CAR-030046 Carbide Drill – 3.0mm

Box of 100

1 Drill

TUP-400-SCA 400ml Aerosol Paint

TUP-500-SCT 500ml Touch Up Paint

1 Tin

1 Tin

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for Rockpanel - Colour Changing Rivets 26 for Rockpanel - Colour Changing Rivets

Even with the most elaborate panels our colour matching offers an invisible solution. With Architects and designers utilising the latest colour innovations for manufacturers cladding panels, Mainline are at the front of the industry providing a truly accurate colour matched solution. The project above utilises our chameleon rivets for a stunning visual yet invisible effect.

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


and Accessories for Rockpanel Fixings and Accessories forFixings Rockpanel 27

Timber Nail Fix – 3.8mm Sliding Point – 2.5mm Fixed Point 6 & 8mm Panels – Durable Product

-

8mm Panels – Xtreme

-

9mm Panels – FS-Xtra (Not to timber)

Code

Application

ANR 2.65 X 40 SS

6 & 8mm Panels A2 Stainless Steel annular ring shank nail for fixing to timber substructure.

Timber Screw Fix – 6.0mm Sliding Point – 2.5mm Fixed Point Product

Code

Application

SWSH 4.5 X 35

6 & 8mm Panels A4 Stainless Steel low-profile screw with a 9.6mm Head and a woodscrew thread. To face fix panels to timber

Aluminium Sub Frame Rivet Fix FX-Xtra,Durable & Xtreme - 8.0mm Sliding Point – 5.1mm Fixed Point Product

Code

Application

SSAL5/5.0 x 18 x 14

6, 8 & 9mm Panels. 5.0 x 18 x 14mm head rivet Grip range of 8.0 - 14mm AlMg5 aluminium body – Stainless Mandrel

CT7551

Centralising Tool Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/RP/K14

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051080

Step Drill One step site drill bit for 8.0mm hole in panels and 5.1mm hole in the aluminium rail

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Rieder C, Concrete Fixings and Accessories forFibre Rieder Fibre C, Concrete 28 Skin & OKO Pura by Facades SkinStone & OKOPanels Stoneby Panels Pura Facades

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories for Rieder Fibre C, Fixings and Accessories for Rieder Fibre C, Concrete 29 Concrete Skin & OKO Stone Panels by Pura Skin & OKO Stone Panels by Pura Facades Timber Fix – 8.0mm Sliding Point – No Fixed Point Product

Code

Application

SWLP 4.8 x 38

13mm Panels A2 Stainless Steel low-profile screw with a 12mm Head and a woodscrew thread To face fix panels to timber

CT7549-STEP

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the timber behind the panel

CT-STEP-049030

Replacement drill bit For the centralising tool above

CAR-080079

Carbide Drill Bit For drilling sliding point holes on site 8.0mm Diameter

Aluminium Sub Frame Rivet Fix – 8.0mm Sliding Point – 5.1mm Fixed Point Product

Code

Application

SSAL 5.0 x 25 x 14

13mm Panels Only 5.0 x 25 x 14mm head rivet Grip range of 16.0 – 21.0mm Aluminium body – Stainless Mandrel

SPACBUSH-FIBRE C

Aluminium Bush 8.0mm Diameter 12mm Long x 5.1mm Internal diameter

CT7551

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/RP/K14

Rivet Spacer Nosepiece Used to set the rivet off the panel face by 0.3mm

CAR-051062

Carbide Drill Bit For drilling panel fixed point holes on site 5.1mm diameter

CAR-080079

Carbide Drill Bit For drilling panel sliding points holes on site 8.0mm diameter

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk  sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


ACM Solidand Aluminium Solid Aluminium 30 andACM

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories for 3 & 4mm Solid Fixings and Accessories 31 Aluminium Sheet for 3 & 4mm Solid Aluminium Sheet Timber Fix – 9.5mm Sliding Point – No Fixed Point Product

Code

Application

SWLP 4.8 x 25

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

SWLP 4.8 x 38

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

Face-fix to Aluminium Sub-frame and Cassette Joint Recess Screw Product

Code

Application

SWLP/SD/4.8 x 25/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium - ECT 15mm

SWLP/SD/5.5 x 35/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium - ECT 18mm

SWLP/SDR/4.8 X 19/BI/S12

Bi-metallic A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium and steel ECT 2 – 4mm – Drive T25

Side Stitching Rivet for ACM Cassettes and Flashings / Copings etc.. Product

Code

Application

RBD 4.0 x 12/AS/MG

4.0 x 12 x 8mm head rivet Grip Range 4.0 – 9.5mm Aluminium body – Stainless Mandrel

RBD 4.8 x 15/AS/MG

4.8 x 15 x 9.5mm head rivet Grip Range 4.5 – 11.0 Aluminium body – Stainless Mandrel

RBC 4.8 x 12/AS

4.8 x 12 x 120° head rivet Grip Range 6.0 – 8.0mm Aluminium body – Stainless Mandrel

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories 3 & 4mm Solid Fixings and Accessories 32 Aluminium for Sheet 3 & 4mm Solid Aluminium Sheet Rivet Fix for panels under 1 Metre Wide – 7.0mm Sliding Point – No Fixed Point Product

Code

Application

SSAL5/5.0 x 12 x 11

5.0 x 12 x 11mm head rivet Grip Range 6 – 8mm AlMg5 Aluminium body – Stainless Mandrel

CT6551

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/AL/K11

Rivet spacer nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051070

Step Drill One step site drill bit for 7.0mm hole in the panel and 5.1mm hole in the rail

Rivet Fix for panels over 1 Metre Wide – 8.5mm Sliding Point – No Fixed Point Product

Code

Application

SSAL5/5.0 x 12 x 14

5.0 x 12 x 14mm head rivet Grip Range 6 – 8mm AlMg5 Aluminium body – Stainless Mandrel

CT8051

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/AL/K14

Rivet spacer nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051085

Step Drill One step site drill bit for 8.5mm hole in the panel and 5.1mm hole in the rail

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


® and Accessories for Alucobond® Fixings and AccessoriesFixings for Alucobond 33

Timber Fix – 9.5mm Sliding Point – No Fixed Point Product

Code

Application

SWLP 4.8 x 25

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

SWLP 4.8 x 38

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

Face-fix to Aluminium Sub-frame and Cassette Joint Recess Screw Product

Code

Application

SWLP/SD/4.8 x 25/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium - ECT 15mm

SWLP/SD/5.5 x 35/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium - ECT 18mm

SWLP/SDR/ 4.8 X 19/BI/S12

Bi-metallic A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium and steel ECT 2 – 4mm – Drive T25

Side Stitching Rivet for ACM Cassettes and Flashings / Copings etc.. Product

Code

Application

RBD 4.0 x 12/AS/MG

4.0 x 12 x 8mm head rivet Grip Range 4.0 – 9.5mm Aluminium body – Stainless Mandrel

RBD 4.8 x 15/AS/MG

4.8 x 15 x 9.5mm head rivet Grip Range 4.5 – 11.0 Aluminium body – Stainless Mandrel

RBC 4.8 x 12/AS

4.8 x 12 x 120° head rivet Grip Range 6.0 – 8.0mm Aluminium body – Stainless Mandrel

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Alucobond® Fixings and Accessories for Alucobond® 34

Rivet Fix for panels under 1 Metre Wide – 7.0mm Sliding Point – No Fixed Point Product

Code

Application

SSAL5/5.0 x 12 x 11

5.0 x 12 x 11mm head rivet Grip Range 6 – 8mm AlMg5 Aluminium body – Stainless Mandrel

CT6551

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/AL/K11

Rivet spacer nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051070

Step Drill One step site drill bit for 7.0mm hole in the panel and 5.1mm hole in the rail

Rivet Fix for panels over 1 Metre Wide – 8.5mm Sliding Point – No Fixed Point Product

Code

Application

SSAL5/5.0 x 12 x 14

5.0 x 12 x 14mm head rivet Grip Range 6 – 8mm AlMg5 Aluminium body – Stainless Mandrel

CT8051

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/AL/K14

Rivet spacer nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051085

Step Drill One step site drill bit for 8.5mm hole in the panel and 5.1mm hole in the rail

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories XT ACM Panels Fixings and Accessories for Alupanel for XT Alupanel ACM Panels 35

Timber Fix – 8.5mm Sliding Point – No Fixed Point Product

Code

Application

SWLP 4.8 x 25

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

SWLP 4.8 x 38

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

Face-fix to Aluminium Sub-frame and Cassette Joint Recess Screw Product

Code

Application

SWLP/SD/4.8 x 25/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium - ECT 15mm

SWLP/SD/5.5 x 35/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium - ECT 18mm

SWLP/SDR/4.8 X 19/BI/S12

Bi-metallic A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium and steel ECT 2 – 4mm – Drive T25

Side Stitching Rivet for ACM Cassettes and Flashings / Copings etc.. Product

Code

Application

RBD 4.0 x 12/AS/MG

4.0 x 12 x 8mm head rivet Grip Range 4.0 – 9.5mm Aluminium body – Stainless Mandrel

RBD 4.8 x 15/AS/MG

4.8 x 15 x 9.5mm head rivet Grip Range 4.5 – 11.0 Aluminium body – Stainless Mandrel

RBC 4.8 x 12/AS

4.8 x 12 x 120° head rivet Grip Range 6.0 – 8.0mm Aluminium body – Stainless Mandrel

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Alupanel XT ACM XT Panels Fixings and Accessories for Alupanel ACM Panels 36

Rivet Fix for panels under 1 Metre Wide – 7.0mm Sliding Point – No Fixed Point Product

Code

Application

SSAL5/5.0 x 12 x 11

5.0 x 12 x 11mm head rivet Grip Range 6 – 8mm AlMg5 Aluminium body – Stainless Mandrel

CT6551

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For centralising tool above

RT/ACB/NP/AL/K11

Rivet spacer nose piece Used to set the rivet off the panel face by 0.3mm

STEP-051070

Step Drill One step site drill bit for 7.0mm hole in the panel and 5.1mm hole in the rail

Rivet Fix for panels over 1 Metre Wide – 8.5mm Sliding Point – No Fixed Point Product

Code

Application

SSAL5/5.0 x 12 x 14

5.0 x 12 x 14mm head rivet Grip Range 6 – 8mm AlMg5 Aluminium body – Stainless Mandrel

CT8051

Centralising Tool Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For centralising tool above

RT/ACB/NP/AL/K14

Rivet spacer nose piece Used to set the rivet off the panel face by 0.3mm

STEP-051085

Step Drill One step site drill bit for 8.5mm hole in the panel and 5.1mm hole in the rail

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories Fixings and Accessories for Larson FR & 37 for Larson FR & Larcore A2 ACM Panels Larcore A2 ACM Panels Timber Fix – 8.5mm Sliding Point – No Fixed Point Product

Code

Application

SWLP 4.8 x 25

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

SWLP 4.8 x 38

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

Face-fix to Aluminium Sub-frame and Cassette Joint Recess Screw Product

Code

Application

SWLP/SD/4.8 x 25/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium ECT 15mm

SWLP/SD/5.5 x 35/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium – ECT 18mm

SWLP/SDR/4.8 X 19/BI/S12

Bi-metallic A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium and steel ECT 2 – 4mm – Drive T25

Side Stitching Rivet for ACM Cassettes and Flashings / Copings etc.. Product

Code

Application

RBD 4.0 x 12/AS/MG

4.0 x 12 x 8mm head rivet Grip Range 4.0 – 9.5mm Aluminium body – Stainless Mandrel

RBD 4.8 x 15/AS/MG

4.8 x 15 x 9.5mm head rivet Grip Range 4.5 – 11.0 Aluminium body – Stainless Mandrel

RBC 4.8 x 12/AS

4.8 x 12 x 120° head rivet Grip Range 6.0 – 8.0mm Aluminium body – Stainless Mandrel

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Larson FR & Fixings and Accessories 38 Larcore A2 Panels for ACM Larson FR & Larcore A2 ACM Panels Rivet Fix for panels under 1 Metre Wide – 7.0mm Sliding Point – No Fixed Point Product

Code

Application

SSAL5/5.0 x 12 x 11

5.0 x 12 x 11mm head rivet Grip Range 6 – 8mm AlMg5 Aluminium body – Stainless Mandrel

CT6551

Centralising Tool Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/AL/K11

Rivet spacer nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051070

Step Drill One step site drill bit for 7.0mm hole in the panel and 5.1mm hole in the rail

Rivet Fix for panels over 1 Metre Wide – 8.5mm Sliding Point – No Fixed Point Product

Code

Application

SSAL5/5.0 x 12 x 14

5.0 x 12 x 14mm head rivet Grip Range 6 – 8mm AlMg5 Aluminium body – Stainless Mandrel

CT8051

Centralising Tool Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-5.1

Replacement drill bit For the centralising tool above

RT/ACB/NP/AL/K14

Rivet spacer nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-051085

Step Drill One step site drill bit for 8.5mm hole in the panel and 5.1mm hole in the rail.

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Fixings and Accessories for Vitrabond FR, Vitrabond A2 Fixings and Accessories for Vitrabond FR, 39 & Vitracore G2 ACM Panels Vitrabond A2 & Vitracore G2 ACM Panels Timber Fix – 7.0mm Sliding Point – No Fixed Point Product

Code

Application

SWLP 4.8 x 25

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

SWLP 4.8 x 38

A2 Stainless Steel low-profile screw 12mm Head and a woodscrew thread To face fix panels to timber

Face-fix to Aluminium Sub-frame and Cassette Joint Recess Screw Product

Code

Application

SWLP/SD/4.8 x 25/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium - ECT 15mm

SWLP/SD/5.5 x 35/S

A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium – ECT 18mm

SWLP/SD/4.8 X 19/BI/S12

Bi-metallic A2 Stainless Steel low-profile screw 12mm head and a self-drilling tip. To face fix panels to aluminium and steel ECT 2 – 4mm – Drive T25

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Fixings and Accessories for Vitrabond FR, Vitrabond Fixings and Accessories for Vitrabond FR, A2 40 & Vitracore G2 ACM Vitrabond A2Panels & Vitracore G2 ACM Panels Side Stitching Rivet for ACM Cassettes and Flashings / Copings etc.. Product

Code

Application

RBD 4.0 x 12/AS/MG

4.0 x 12 x 8mm head rivet Grip Range 4.0 – 9.5mm Aluminium body – Stainless Mandrel

RBD 4.8 x 15/AS/MG

4.8 x 15 x 9.5mm head rivet Grip Range 4.5 – 11.0 Aluminium body – Stainless Mandrel

RBC 4.8 x 12/AS

4.8 x 12 x 120° head rivet Grip Range 6.0 – 8.0mm Aluminium body – Stainless Mandrel

Aluminium Sub Frame Rivet Fix – 7.0mm Sliding Point – 4.9mm Fixed Point Product

Code

Application

SSAL 4.8 x 18 x 16

4.8 x 18 x 16mm head rivet Grip range of 6.5 – 12.5mm Aluminium body – Stainless Mandrel

CT6549

Centralising Tool Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel

CT-HDRLG-4.9

Replacement drill bit For the centralising tool above

RT/ACB/NP/AL/K16

Rivet spacer nosepiece Used to set the rivet off the panel face by 0.3mm

STEP-049070

Step Drill One step site drill bit for 7.0mm hole in the panel and 4.9mm hole in the rail

Panel Manufacturers do change their system from time to time. If in any doubt, please check with your panel manufacturer

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk  sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Façade Anchors 41

Façade Anchors

Hexagon Plug with large Rim Ø18mm / Hex Head Screw with built-in washer Ø19mm T40 Recess – 50mm Embedment

Code MFA10060-X3 MFA10100-X3

Plug Dia. x Length

Size M10 x 60

M10 x 100

10 x 60

10 x 100

Screw Diameter x Length 7 x 68

7 x 108

Fixing Thickness for Embedment Depth Reduced

Standard

Increased (1)

10

-

-

50

30

Box Qty

Outer Box Qty

50

500

10 50 500 Only for aerated concrete (1)

(1)

Countersunk rim plug countersunk head screw Ø 6 Torx T30 recess Ø 7 -T40 Recess – 50mm Embedment Inox A4 70

Code

Size

MFA-CSK-10060-X3

M10 x 60

10 x 60

7 x 68

10

MFA-CSK-10100-X3

M10 x 100

10 x 100

7 x 108

50

MFA-CSK-10140-X3

M10 x 140

MFA-CSK-10080-X3 MFA-CSK-10120-X3 MFA-CSK_10160-X3

M10 x 80

M10 x 120 M10 x 160

10 x 80

10 x 120 10 x 140 10 x 160

Screw Diameter x Length

Fixing Thickness for Embedment Depth

Plug Dia. x Length

7 x 88

7 x 128 7 x 148 7 x 168

Reduced

Standard

Increased (1)

-

-

30

10

70

50

70

100

-

30

10

(1)

70

50

(1)

90

30 (1)

(1)

Box Qty

Outer Box Qty

50

500

50

500

50 50 50

70 50 Only for aerated concrete (1)

500 500 500 500

Pull Out Tests are available on Request

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Façade Fasteners Façade Fasteners – Support– Structure to Concrete and Masonry 42 Support Structure to Concrete and Masonry Installing Helping Hand Brackets and Metal Sections to Concrete and Masonry Inox A4 70

Code

Size

Minimum Embedment Concrete

Masonry

Pilot Hole Diameter

SDF/KB/10V/10050

10 X 50

40mm

-

10mm

SDF/KB/10V/10060

10 X 60

40mm

50mm

10mm

SDF/KB/10V/10070

10 X 70

40mm

50mm

10mm

Drive : 13mm One Piece Socket or Torx 40

ETA 10/0305

For Installing Helping Hand Brackets and Metal Sections to Perforated Brickwork and Masonry Inox A4 70

Code

Size

Minimum Embedment

Pilot Hole Diameter

SDF/KB/10H/10080

10 X 80

70mm

10mm

SDF/KB/10H/10100

10 X 100

70mm

10mm

SDF/KB/10H/10120

10 X 120

70mm

10mm

Drive : 13mm One Piece Socket or Torx 40 ETA 10/0305

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Austenitic Stainless-Steel Austenitic Stainless-Steel 43 Low-Profile Façade Screws Low-Profile for Timber Façade Screws for Timber For Face fixing HPL & Fibre Cement type Panels to Timber Battens – A2 Stainless Steel

Diameter (mm)

Length (mm)

Head Size (mm)

Head Recess

Grade of Stainless

SWLP4825/A2S

4.8

25

12

T20

A2

SWLP4838/A2S

4.8

38

12

T20

A2

Code SWLP4832/A2S SWLP483814/A2S SWLP4850/A2S SWLP4855/A2S

SWLP485514/A2S SWLP4860/A2S

4.8 4.8 4.8 4.8 4.8 4.8

32 38 50 55 55 60

12 14 12 12 14 12

T20 T20 T20 T20 T20 T20

A2 A2 A2 A2 A2 A2

For Face fixing Fibre Cement Panels & Weatherboard to Timber Battens - A2 S/S

Code SWLP4838/W/A2S

Diameter (mm)

Length (mm)

Head Size (mm)

Head Recess

Grade of Stainless

4.8

38

12

T20

A2

For Face fixing HPL & Fibre Cement Panels - For Marine and Harsh Environments A4 S/S

Diameter (mm)

Length (mm)

Head Size (mm)

Head Recess

Grade of Stainless

SWSH4535/A4S

4.5

35

9.6

T20

A4

SWLP5535/A4S

5.5

35

12

T20

A4

Code SWLP5525/A4S

SWLP553516/A4S SWLP554016/A4S SWLP5545/A4S SWLP5555/A4S

SWLP556514/A4S SWLP558014/A4S

SWLP5510014/A4S

5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5

25 35 40 45 55 65 80

100

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

12 16 16 12 12 14 14 14

T20 T20 T20 T20 T20 T20 T20 T20

A4 A4 A4 A4 A4 A4 A4 A4

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Austenitic Stainless-Steel Austenitic Stainless-Steel 44 Low-Profile Façade Screws Aluminium Low-Profile Façadefor Screws for Aluminium Especially suited for face fixing ACM Panels & Cassette Joint Recess to Aluminium Rail Aluminium sections from 1.2 to 3.5mm in thickness – Low profile dome head

Diameter (mm)

Length (mm)

Head Size (mm)

Head Recess

SWLP/SD/4825/S

4.8

25

12

T20

15

A2

SWLP/SD/5535/S

5.5

35

12

T25

18

A2

SWLP/SD/4825/S/S12

4.8

25

12

T20

13

A2

SWLP/SD/5535/S/S12

5.5

35

12

T25

16

A2

Code

ECT = Effective Clamping Tolerance

ECT (mm)

Grade of Stainless

Especially suited to Face fix Aluminium Flashings from 0.7 to 2.0mm to Timber Battens Low profile dome head

Diameter (mm)

Length (mm)

Head Size (mm)

Head Recess

ESL (mm)

Grade of Stainless

SWLP/SD/4935/S

4.9

35

12

T20

N/A

A2

SWLP/SD/4935/S/S12

4.9

35

12

T20

N/A

A2

Code

ESL = Effective Stainless Length – Available with a washer if requested

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Austenitic Stainless-Steel Austenitic Stainless-Steel 45 Low-Profile Screws for Aluminium Low-Profile Screws for Aluminium Especially suited for fixing aluminium profiles to aluminium substructure. Aluminium sections from 1.5 to 4.0mm in thickness - Low profile dome head

Dia. (mm)

Length (mm)

ECT (mm)

Head Size (mm)

Head Recess

Grade of Stainless

SWLP/SD/4.8 x 19 /S

4.8

19

0.0–9.0

12

T25

A2

SWLP/SD/4.8 x 19/S/S12

4.8

19

1.5-6.0

12

T25

A2

SWLP/SD/5.5 x 19 /S

5.5

19

1.5-7.0

12

T25

A2

SWLP/SD/5.5 x 19/S/S12

5.5

19

1.5-5.0

12

T25

A2

Code

ECT = Effective Clamping Tolerance

Especially suited for fixing aluminium profiles to aluminium substructure . Aluminium sections from 1.5 to 4.0mm in thickness - Low profile Dome head

Dia. (mm)

Length (mm)

ECT (mm)

Head Size (mm)

Head Recess

Grade of Stainless

PSR/T25/4.8 x 19 /S

4.8

19

1.5-9.0

9

T25

A2

PSR/T25/4.8 x 25 /S

4.8

25

1.5-15.0

9

T25

A2

PSR/T25/4.8 x 19 /S/S12

4.8

19

1.5-7.0

9

T25

A2

PSR/T25/4.8 x 25 /S/S12

4.8

25

1.5-13.0

9

T25

A2

Code

ECT = Effective Clamping Tolerance

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Austenitic Stainless-Steel Austenitic Stainless-Steel 46 Hex Head Screws Aluminium Hex Headfor Screws for Aluminium Especially suited for fixing aluminium profiles to aluminium substructure. Aluminium sections from 1.5 - 4.0mm in thickness.

Dia. (mm)

Length (mm)

ECT (mm)

Drive

Grade of Stainless

HSDL/4.8 X 19 /S

4.8

19

1.5 – 9.0

8mm Clip Hex

A2

HSDL/4.8 X 19 /S/A14

4.8

19

1.5 – 6.0

8mm Clip Hex

A2

Code

ECT = Effective Clamping Tolerance

Especially suited for fixing aluminium profiles to aluminium substructure. Aluminium sections from 2.0 to 6.0mm in thickness.

Dia. (mm)

Length (mm)

ECT (mm)

Drive

Grade of Stainless

HSDM/5.5 X 19 /S

5.5

19

2.0 – 8.0

8mm clip hex

A2

HSDM/5.5 X 22 /S

5.5

22

0.0 – 10.0

8mm clip hex

A2

HSDM/5.5 X 30 /S

5.5

30

0.0 – 18.0

8mm clip hex

A2

HSDM/5.5 X 19 /S/A14

5.5

19

2.0 – 5.0

8mm clip hex

A2

HSDM/5.5 X 22 /S/A14

5.5

22

2.0 – 8.0

8mm clip hex

A2

HSDM/5.5 X 30 /S/A14

5.5

30

2.0 – 16.0

8mm clip hex

A2

Code

ECT = Effective Clamping Tolerance

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Bi Metallic Stainless-Steel Bi Metallic Stainless-Steel 47 Low-Profile Screws -- Self-Drilling - Reduced Drill Tip Low-Profile Screws - Self-Drilling Reduced Drill Tip  +44 (0) 1782 629 270

Especially suited for Profiled roofing and cladding sheets to Timber & Aluminium roofing  sales@mainlineproducts.co.uk : www.mainlineproducts.co.uk and cladding sheets to Timber – Steel sections from 0.7 to 2.0mm in thickness

Code SWLP/SDR/4.9 x 35/BI SWLP/SDR/4.9 x 35/BI/S12

ECT = Effective Clamping Tolerance

Diameter (mm)

Length (mm)

ECT (mm)

Head Size

N/A

12

4.9

35

N/A

12

4.9

35

Head Recess

Grade of Stainless

T25

Bi Met

T25

Bi Met

Especially suited for Stitching Steel and aluminium flashings to roofing and cladding sheets and for Stitching 2 x 0.5mm up to 2 x 1.0mm in thickness

Head Size

19

ECT (mm)

2.0 - 6.0

12

4.8

19

2.0 - 4.0

SWLP/SDR/6.3 X 25/BI

6.3

25

SWLP/SDR/6.3 X 25/BI/S12

6.3

25

Diameter (mm)

Length (mm)

SWLP/SDR/4.8 X 19/BI/S12

Code SWLP/SDR/4.8 X 19/BI

ECT = Effective Clamping Tolerance

4.8

Head Recess

Grade of Stainless

12

T25

Bi Met

2.0 - 11.0

12

T25

Bi Met

2.0 - 9.0

12

T25

Bi Met

T25

Bi Met

For Profiled roofing and cladding sheets to light steel sections & Aluminium roofing and cladding sheets to medium steel sections from 1.2 to 2.5mm in thickness

Code SWLP/SDR/5.5 X 25/BI SWLP/SDR/5.5 X 25/BI/S12

ECT = Effective Clamping Tolerance

Head Size

25

ECT (mm)

2.0 - 9.0

12

25

2.0 - 7.0

12

Diameter (mm)

Length (mm)

5.5

5.5

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

Head Recess

Grade of Stainless

T25

Bi Met

T25

Bi Met

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Bi Metallic Stainless-Steel Bi Metallic Stainless-Steel 48 Low Profile Lightfor Section and Aluminium LowScrews Profilefor Screws Light Steel Section Steel and Aluminium Especially suited for fixing metal to profiled sheet or sandwich panels & Fixing plastic clips to profiled metal or sandwich panels - Stitching 2 x 0.5mm up to 2 x 1.0mm in thickness

Code SWLP/SDP/5.5 X 25/BI

Head Size

25

ECT (mm)

0.0 – 10.0

12

25

0.5 - 8.0

12

Diameter (mm)

Length (mm)

5.5

5.5

SWLP/SDP/5.5 X 25/BI/S12

ECT = Effective Clamping Tolerance

Head Recess

Grade of Stainless

T25

Bi Met

T25

Bi Met

Especially suited for Steel sections from1.2 to 3.0 mm in thickness. Very Low profile head to prevent interference.

Code SWLP/SDL/LT3/5.5 x 25 BI

Diameter (mm)

ECT = Effective Clamping Tolerance

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

5.5

Length (mm) 25

ECT (mm)

2.0 - 10.0

Head Size 12

: www.mainlineproducts.co.uk

Head Recess T25

Grade of Stainless Bi Met


Bi Metallic Stainless-Steel Low-Profile Screws Bi Metallic Stainless-Steel Low-Profile ScrewsSteel and Aluminium for Light Section 49 for Light Section Steel and Aluminium Especially suited for Roofing or cladding sheets to light steel sections & Aluminium roofing and cladding sheets to light Steel sections from 1.5 to 3.0mm in thickness

Code SWLP/SDL/5.5 X 50/BI ECT = Effective Clamping Tolerance

0.7 – 32.0

12

50

0.0 – 31.0

12

Length (mm)

5.5

5.5

SWLP/SDL/5.5 X 50/BI/S12

Head Size

50

ECT (mm)

Diameter (mm)

Head Recess

Grade of Stainless

T25

Bi Met

T25

Bi Met

Especially suited for Roofing or cladding sheets to Medium steel sections & Aluminium roofing and cladding sheets to medium Steel sections from 1.2 to 6.0mm in thickness

Length (mm) 25

1.2 – 8.0

12

SWLP/SDM/5.5 X 35/BI

5.5

35

1.2 – 18.0

SWLP/SDM/5.5 X 25/BI/S12

5.5

25

SWLP/SDM/5.5 X 35/BI/S12

5.5

35

SWLP/SDM/5.5 X 25/BI

5.5

ECT = Effective Clamping Tolerance

ECT (mm)

Head Size

Diameter (mm)

Code

Head Recess

Grade of Stainless

12

T25

Bi Met

0.0 – 7.0

12

T25

Bi Met

0.0 – 17.0

12

T25

Bi Met

T25

Bi Met

Especially suited for Roofing or cladding sheets to Heavy steel sections & Aluminium roofing and cladding sheets to medium Steel sections from 4.0 to 12.0mm in thickness

Code SWLP/SDH/5.5 X 40/BI ECT = Effective Clamping Tolerance

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk

4.0 – 14.0

12

40

4.0 – 14.0

12

Length (mm)

5.5

5.5

SWLP/SDH/5.5 X 40/BI/S12

Head Size

40

ECT (mm)

Diameter (mm)

Head Recess

Grade of Stainless

T25

Bi Met

T25

Bi Met

 +44 (0) 1782 629 270  sales@mainlineproducts.co.uk : www.mainlineproducts.co.uk


Bi Metallic Stainless-Steel - Hex Head Screws Bi Metallic Stainless-Steel - Hex Head Screws 50 Self-Drilling - Reduced Drill TipDrill Tip Self-Drilling - Reduced Especially suited for fixing profiled roofing and cladding sheets to timber sections. Steel sections up to 2.0mm in thickness

Dia. (mm)

Length (mm)

ECT (mm) N/A

8mm Clip Hex

HSDR/5.6 x 35 BI

5.6

35

N/A

8mm Clip Hex

Bi Met

HSDR/4.9 x 35 BI/S14

4.9

35

N/A

8mm Clip Hex

Bi Met

HSDR/5.6 x 35 BI/S16

5.6

35

N/A

8mm Clip Hex

Bi Met

Code HSDR/4.9 x 35 BI

4.9

35

ECT = Effective Clamping Tolerance – S19 & 29mm Washers Available on request

Drive

Grade of Stainless Bi Met

Especially suited for fixing steel & aluminium profiles to thin steel/aluminium substructure. Steel Sections from 0.7 to 1.6mm in thickness

Code HSDR/6.0 x 25/BI HSDR/6.0 x 25/BI/S16

Dia. (mm)

Length (mm) 25

0.0 – 7.0

8mm Clip Hex

6.0

25

0.7 – 7.0

8mm Clip Hex

6.0

ECT (mm)

ECT = Effective Clamping Tolerance – S19 & 29mm Washers Available on request

Drive

Grade of Stainless Bi Met Bi Met

Especially suited for Stitching Steel & Aluminium roofing & Cladding Sheets, flashings, & for stitching 2.0 x 0.5mm up to 2 x 1.0mm in thickness

Code HSDR/6.3 x 25/BI HSDR/6.3 x 25/BI/S16

Dia. (mm)

Length (mm)

ECT (mm) N/A

8mm Clip Hex

6.3

25

N/A

8mm Clip Hex

6.3

25

ECT = Effective Clamping Tolerance – S19 Washers Available on request

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

Drive

: www.mainlineproducts.co.uk

Grade of Stainless Bi Met Bi Met


Bi Bi Metallic Stainless-Steel - Hex Metallic Stainless-Steel Hex Head Head Screws Screws Self-Drilling Self Drilling- Reduced - ReducedDrill DrillTip Tip

51

Especially suited for fixing profiled roofing and cladding sheets to timber sections. Steel sections up to 2.0mm in thickness

Dia. (mm)

Length (mm)

ECT (mm) N/A

8mm Clip Hex

HSDR/5.6 x 35 BI

5.6

35

N/A

8mm Clip Hex

Bi Met

HSDR/4.9 x 35 BI/S14

4.9

35

N/A

8mm Clip Hex

Bi Met

HSDR/5.6 x 35 BI/S16

5.6

35

N/A

8mm Clip Hex

Bi Met

Code HSDR/4.9 x 35 BI

4.9

35

ECT = Effective Clamping Tolerance – S19 & 29mm Washers Available on request

Drive

Grade of Stainless Bi Met

Especially suited for fixing steel & aluminium profiles to thin steel/aluminium substructure. Steel Sections from 0.7 to 1.6mm in thickness

Code HSDR/6.0 x 25/BI HSDR/6.0 x 25/BI/S16

Dia. (mm)

Length (mm) 25

0.0 – 7.0

8mm Clip Hex

6.0

25

0.7 – 7.0

8mm Clip Hex

6.0

ECT (mm)

ECT = Effective Clamping Tolerance – S19 & 29mm Washers Available on request

Drive

Grade of Stainless Bi Met Bi Met

Especially suited for Stitching Steel & Aluminium roofing & Cladding Sheets, flashings, & for stitching 2.0 x 0.5mm up to 2 x 1.0mm in thickness

Code HSDR/6.3 x 25/BI HSDR/6.3 x 25/BI/S16

Dia. (mm)

Length (mm)

ECT (mm) N/A

8mm Clip Hex

6.3

25

N/A

8mm Clip Hex

6.3

25

ECT = Effective Clamping Tolerance – S19 Washers Available on request

t: +44(0)1782 629 270

Drive

 +44 (0) 1782 629 270 e: sales@mainlineproducts.co.uk mainlineproducts.co.uk  w: sales@mainlineproducts.co.uk : www.mainlineproducts.co.uk

Grade of Stainless Bi Met Bi Met


Bi Metallic Stainless-Steel Bi Metallic Stainless-Steel Hex Head Screws 52 Hex Head Screws - Self-Drilling - foror Aluminium or Steel Self-Drilling - for Aluminium Steel Especially suited for fixing Profiled roofing and cladding sheets and Aluminium Roofing and cladding to Light Steel Sections 1.2 to 3.0mm in thickness

Dia. (mm)

Length (mm)

ECT(mm) No Washer 1.2 – 8.0

8mm Clip Hex

HSDL/5.5 x 35/BI /S16

5.5

35

1.2 – 16.0

8mm Clip Hex

Bi Met

HSDL/5.5 x 50/BI /S16

5.5

50

1.2 – 31.0

8mm Clip Hex

Bi Met

HSDL/5.5 x 70/BI /S16

5.5

70

1.2 – 51.0

8mm Clip Hex

Bi Met

Code HSDL/5.5 x 25/BI /S16

5.5

25

Drive

ECT = Effective Clamping Tolerance – No washer, S19 Washers & S29 washers Available on request

Grade of Stainless Bi Met

Especially suited for fixing Profiled roofing & cladding sheets to Aluminium or Steel sections. Steel or aluminium 1.2 to 6.0mm in thickness

Code HSDM/6.3 x 25/BI /S16

Dia. (mm) 6.3

Length (mm) 25

ECT(mm) (No Washer 0.0 – 7.0

ECT = Effective Clamping Tolerance – No Washer and S19 washers available on request

Drive A/F 8

Grade of Stainless Bi Met

Especially suited for fixing Profiled roofing and cladding sheets and Aluminium roofing and cladding sheets to hot rolled steel sections 4.0 to 12.mm in thickness

Dia. (mm)

Length (mm)

ECT(mm) (No Washer 4.0 – 14.0

8mm Clip Hex

HSDH/5.5 X 67 BI

5.5

67

4.0 – 41.0

8mm Clip Hex

Bi Met

HSDH/5.5 X 40 BI /S16

5.5

40

4.0 – 12.0

8mm Clip Hex

Bi Met

HSDH/5.5 X 67 BI /S16

5.5

67

4.0 – 39.0

8mm Clip Hex

Bi Met

Code HSDH/5.5 X 40 BI

ECT = Effective Clamping Tolerance

5.5

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

40

Drive

: www.mainlineproducts.co.uk

Grade of Stainless Bi Met


Bi Metallic Stainless-Steel Bi Metallic Stainless-Steel Hex Head Screws 53 Hex Head Screws - for Helping Hand Brackets for Helping Hand Brackets Especially suited for fixing Standing seam halter brackets or Helping hand brackets. For Steel sections or Aluminium sections from 1.2 to 3.0mm

Dia. (mm)

Length (mm)

ECT(mm) No Washer 1.2 – 22.0

8mm Clip Hex

HSDL/6.3 x 50 /BI

6.3

50

1.2 – 34.0

8mm Clip Hex

Bi Met

HSDL/6.3 x 38 /BI/ S16

6.3

38

1.2 – 20.0

8mm Clip Hex

Bi Met

HSDL/6.3 x 50 /BI/ S16

6.3

50

1.2 – 32.0

8mm Clip Hex

Bi Met

Code HSDL/6.3 x 38 /BI

6.3

ECT = Effective Clamping Tolerance –

38

Drive

Grade of Stainless Bi Met

Especially suited for fixing Standing seam halter brackets or Helping hand brackets. For Steel sections or Aluminium sections from 1.2 to 6.0mm

Dia. (mm)

Length (mm)

ECT(mm) (No Washer

Drive

0.0 – 7.0

A/F 8

HSDM/5.5 x 30 /BI

5.5

30

0.0 – 11.0

A/F 8

Bi Met

HSDM/5.5 x 35 /BI

5.5

35

0.0 – 16.0

A/F 8

Bi Met

HSDM/5.5 x 50 /BI

5.5

50

0.0 – 31.0

A/F 8

Bi Met

HSDM/5.5 x 70 /BI

5.5

70

22.0 – 51.0

A/F 8

Bi Met

HSDM/5.5 x 90 /BI

5.5

90

42.0 – 71.0

A/F 8

Bi Met

HSDM/5.5 x 110 /BI

5.5

110

62.0 – 91.0

A/F 8

Bi Met

HSDM/5.5 x 130 /BI

5.5

130

82.0 – 102.0

A/F 8

Bi Met

HSDM/5.5 x 150 /BI

5.5

150

102.0 – 122.0

A/F 8

Bi Met

HSDM/5.5 x 170 /BI

5.5

170

122.0 – 151.0

A/F 8

Bi Met

HSDM/5.5 x 190 /BI

5.5

190

142.0 – 171.0

A/F 8

Bi Met

Code HSDM/5.5 x 25 /BI

5.5

25

ECT = Effective Clamping Tolerance – No Washer, S16,S19 & S29 washers available on request

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

Grade of Stainless Bi Met

+44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Large Flange Body /Stainless LargeAluminium Flange Aluminium Body / Mandrel 54 Façade Rivets Stainless Mandrel Façade Rivets Dome Head 11mm Large Flange Rivets

Product Code SSAL5/501211

Diameter (mm)

Length (mm)

Head (mm)

5.0

12

11

Grip range (mm)

6.0 – 8.0

Body Material

Grade of Aluminium

Mandrel

Units of Sale

Aluminium

AlMg 5

Stainless

100

Dome Head 14mm Large Flange Rivets

Product Code

Diameter (mm)

Length (mm)

Head (mm)

SSAL5/501214

5.0

12

14

SSAL/501414

5.0

14

SSAL5/501814

5.0

18

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

Grip range (mm)

Body Material

Grade of Aluminium

Mandrel

Units of Sale

6.0 – 8.0

Aluminium

AlMg 5

Stainless

100

14

8.0 – 10.0

Aluminium

AlMg 3.5

Stainless

100

14

8.0 – 14.0

Aluminium

AlMg 5

Stainless

100

: www.mainlineproducts.co.uk


Large LargeFlange FlangeAluminium AluminiumBody Body/ /Stainless Mandrel Façade Rivets 55 Stainless Mandrel Façade Rivets Dome Head 15mm Large Flange Rivets

Product Code

Diameter (mm)

Length (mm)

Head (mm)

SSAL5/4018

4.0

18

15

SSAL5/4025

4.0

25

15

Grip range (mm)

Body Material

Grade of Aluminium

Mandrel

Units of Sale

8.0 – 13.0

Aluminium

AlMg 5

Stainless

100

12.0 – 18.0

Aluminium

AlMg 5

Stainless

100

Dome Head 16mm Large Flange Rivets

Product Code

Diameter (mm)

Length (mm)

Head (mm)

SSAL481016

4.8

10

16

SSAL481816

4.8

18

SSAL482316

4.8

SSAL483016

Grip range (mm)

Body Material

Grade of Aluminium

Mandrel

Units of Sale

1.5 – 6.5

Aluminium

AlMg 2.5

Stainless

100

16

6.5 – 12.5

Aluminium

AlMg 2.5

Stainless

100

23

16

11.0 – 19.5

Aluminium

AlMg 2.5

Stainless

100

4.8

30

16

23.0 – 25.0

Aluminium

AlMg 2.5

Stainless

100

SSAL5/501816

5.0

18

16

8.0 – 14.0

Aluminium

AlMg 5

Stainless

100

SSAL5/502516

5.0

25

16

12.5 – 18.0

Aluminium

AlMg 5

Stainless

100

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Standard Aluminium Body / Mandrel Façade Rivets Standard Aluminium Body /Stainless 56 Stainless Mandrel Façade Rivets 120° Countersunk Rivets

Product Code RBC4812/AS

Diameter (mm)

Length (mm)

Head 120°

4.8

12

9

Grip range (mm)

6.0 – 8.0

Body Material Aluminium

Grade of Aluminiu m

Mandrel

Units of Sale

AlMg3.5

Stainless

100

Grade of Aluminiu m

Mandrel

Units of Sale

AlMg2.5

Stainless

100

Dome Head Rivets

Grip range (mm)

Product Code

Diameter (mm)

Length (mm)

Head (mm)

RBD4095/MG/AS

4.0

9.5

8.0

1.5 – 6.5

Aluminium

RBD4012/MG/AS

4.0

12.0

8.0

4.0 – 9.5

Aluminium

AlMg2.5

Stainless

100

RBD4017/MG/AS

4.0

17.0

8.0

8.5 – 13.5

Aluminium

AlMg2.5

Stainless

100

RBD4810/MG/AS

4.8

10.0

9.5

1.5 – 5.5

Aluminium

AlMg2.5

Stainless

100

RBD4815/MG/AS

4.8

15.0

9.5

4.5 – 11.0

Aluminium

AlMg2.5

Stainless

100

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

Body Material

: www.mainlineproducts.co.uk


Large Flange Stainless Body / / Stainless Mandrel Façade Rivets Large Flange Stainless Body 57 Stainless Mandrel Façade Rivets Dome Head 15mm Large Flange Rivets

Product Code

Diameter (mm)

Length (mm)

Head (mm)

Grip range (mm)

Body Material

Mandrel

Units of Sale

SSSS4018

4.0

18

15

12.0 – 14.0

A2 Stainless

A2 Stainless

100

SSSS4025

4.0

25

15

16.0 – 21.0

A2 Stainless

A2 Stainless

100

Dome Head 16mm Large Flange Rivets

Product Code

Diameter (mm)

Length (mm)

Head (mm)

Grip range (mm)

Body Material

Mandrel

Units of Sale

SSSS4814

4.8

14

16

8.0 – 10.0

A2 Stainless

A2 Stainless

100

SSSS4816

4.8

16

16

9.5 – 11.0

A2 Stainless

A2 Stainless

100

SSSS4818

4.8

18

16

11.0 – 13.0

A2 Stainless

A2 Stainless

100

SSSS4820

4.8

20

16

13.0 – 16.0

A2 Stainless

A2 Stainless

100

SSSS4822

4.8

22

16

16.0 – 18.0

A2 Stainless

A2 Stainless

100

SSSS4825

4.8

25

16

17.0 – 20.0

A2 Stainless

A2 Stainless

100

Dome Head 16mm Large Flange Multi Grip Rivets

Product Code

Diameter (mm)

Length (mm)

Head (mm)

Grip range (mm)

Body Material

Mandrel

Units of Sale

SSSS/MG/4820

4.8

20

16

9.0 – 16

A2 Stainless

A2 Stainless

100

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk  sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Standard Body / Mandrel Façade Rivets Standard StainlessStainless Body / Stainless 58 Stainless Mandrel Façade Rivets 120° Countersunk Rivets

Product Code RBC4812SS

Diameter (mm)

Length (mm)

Head (mm)

4.8

12

120°

Grip range (mm)

5.0 – 8.0

Body Material A2 Stainless

Mandrel

Units of Sale

A2 Stainless

100

Dome Head Rivets

Body Material

Mandrel

Units of Sale

9.8

Grip range (mm)

3.0 – 7.0

A2 Stainless

A2 Stainless

100

15.0

9.8

6.0 – 10.0

A2 Stainless

A2 Stainless

100

17.5

9.8

9.0 – 12.5

A2 Stainless

A2 Stainless

100

Product Code

Diameter (mm)

Length (mm)

Head (mm)

RBD4812/MG/SS

4.8

12.0

RBD4815/MG/SS

4.8

RBD4817/MG/SS

4.8

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Aluminium Bulb Tite Rivets 59

Aluminium Bulb Tite Rivets

Dome Head – Aluminium Body / Aluminium Mandrel Aluminium Bulb Tite Rivets Originally designed for the Construction Industry, The Bulb Tite Rivets have proven their worth in many other application fields thanks to their multifunctional properties. Most of the Bulb Tite program has been approved by the Deutschen Institutes fÜr Bautechnik in Berlin, thereby guaranteeing extra security when used in steel constructions or on facades. The three large pressure plates distribute the clamping forces evenly across a large area of the surface so that even soft, thin, supple or brittle materials can be riveted safely without destroying or damaging the surface Diamet er (mm)

Length (mm)

Head (mm)

Grip range (mm)

Body Material Aluminium

Mandrel Aluminium

Units of Sale

5.2

17.5

12.50

1.2 – 4.8

AlMg3.5

AlMg5.0

100

BT-6604-6-4W

5.2

19.1

12.50

1.5 – 6.4

AlMg3.5

AlMg5.0

100

BT-6604-6-6W

5.2

22.2

12.50

4.7 – 9.6

AlMg3.5

AlMg5.0

100

BT-6604-6-8W

5.2

25.4

12.50

7.9 – 12.7

AlMg3.5

AlMg5.0

100

BT-6604-6-10W

5.2

28.6

12.50

11.1 – 15.9

AlMg3.5

AlMg5.0

100

BT-6604-6-12W

5.2

31.8

12.50

14.3 – 19.1

AlMg3.5

AlMg5.0

100

BT-6604-8-6W

6.3

24.0

13.95

3.1 – 9.6

AlMg3.5

AlMg5.0

100

BT-6604-9-6W

7.7

27.5

18.50

1.0 9.5

AlMg3.5

AlMg5.0

100

Product Code BT-6604-6-3W

Product Code

Description

Unit of Sale

BT-NP-5.2

Nose Piece for 5.2mm Rivet

1

BT-NP-6.3

Nose Piece for 6.3mm Rivet

1

BT-NP-7.7

Nose Piece for 7.7mm Rivet

1

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Tapes and Gaskets Tapes and Gaskets 60

EPDM Flexible Finned Gasket for Timber Batten Joints Product

Code

Description

GAS/FIN/36/BL

36mm x 25 Metre Roll Flexible Finned Gasket

GAS/FIN/60/BL

60mm x 25 Metre Roll Flexible Finned Gasket

GAS/FIN/75/BL

75mm x 25 Metre Roll Flexible Finned Gasket

GAS/FIN/100/BL

100mm x 25 Metre Roll Flexible Finned Gasket

PVC Shadowline Tape Product

Code

Description

GAS/SHL/040/PVC

40mm x 33 Metre Roll Shadow Line Tape

GAS/SHL/050/PVC

50mm x 33 Metre Roll Shadow Line Tape

GAS/SHL/075/PVC

75mm x 33 Metre Roll Shadow Line Tape

GAS/SHL/100/PVC

100mm x 33 Metre Roll Shadow Line Tape

GAS/SHL/120/PVC

120mm x 33 Metre Roll Shadow Line Tape

Blackout Tape / Anti Rattle Tape for Alminium Sub-Frame Product

Code

Description

GAS/FLT/SA/035

35mm x 25 Metre Roll Blackout / Anti Rattle Tape

GAS/FLT/SA/050

50mm x 25 Metre Roll Blackout / Anti Rattle Tape

GAS/FLT/SA/060

60mm x 25 Metre Roll Blackout / Anti Rattle Tape

GAS/FLT/SA/080

80mm x 25 Metre Roll Blackout / Anti Rattle Tape

GAS/FLT/SA/100

100mm x 25 Metre Roll Blackout / Anti Rattle Tape

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


PVC Vent Profile 61

PVC Vent Profile

Rigid PVC Vent Profile – 2.5 Metre Length Product

Free Ventilation cross Section

First Diameter (mm)

Larger Diameter (mm)

VP/RP/2525/BL

25

25

112

10

VP/RP/3030/BL

30

30

134

10

VP/RP/3050/BL

30

50

246

10

VP/RP/3060/BL

30

60

291

10

VP/RP/3070/BL

30

70

358

10

VP/RP/3090/BL

30

90

470

10

Width (mm)

Length (Metre)

Free Ventilation cross Section

VP/FP/050x5BL

50

5

269

10

VP/FP/080x5BL

80

5

426

10

VP/FP/100x5BL

100

5

538

10

VP/FP/150x5BL

150

5

648

10

VP/FP/180x5BL

180

5

792

10

VP/FP/050x60BL

50

60

269

10

VP/FP/080x60BL

80

60

426

10

VP/FP/100x60BL

100

60

538

10

Code

Pack Size

cm²/linear metre

Vent Profile Rigid PVC Product

Code

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

Pack Size

cm²/linear meter

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Aluminium Vent Profile Aluminium Vent Profile 62

Aluminium Vent Profile – 2.5 Metre Length

Product

Code

Size

Finish

Free Ventilation cross Section

VP30030MF

30 x 30

Mill Finish

92/92

20

VP30040MF

30 x 40

Mill Finish

92/139

20

VP30050MF

30 x 50

Mill Finish

92/185

20

VP30060MF

30 x 60

Mill Finish

208

10

VP30070MF

30 x 70

Mill Finish

254

10

VP30090MF

30 x 90

Mill Finish

346

10

VP30100MF

30 x 100

Mill Finish

393

10

VP30120MF

30 x 120

Mill Finish

462

10

VP50050MF

50 x 50

Mill Finish

185/185

20

VP50700MF

50 x 70

Mill Finish

185/255

20

VP30040BL

30 x 40

Black

92/139

20

VP30050BL

30 x 50

Black

92/185

20

VP30060BL

30 x 60

Black

208

10

VP30070BL

30 x 70

Black

254

10

VP30100BL

30 x 100

Black

393

10

VP30120BL

30 x 120

Black

462

10

VP50050BL

50 x 50

Black

185/185

20

VP50070BL

50 x 70

Black

185/255

20

Where Free Vent shows two figures i.e. 185/185 it is vented both sites

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk

cm²/linear meter

Pack Size


Rigid PVC Profiles 63

Rigid PVC Profiles

External Corner – 3.0 Metre Length Product

Code

Board Thickness

Black

White

Pack Size

PRF/RP/EC/06-08

6.0mm

10

PRF/RP/EC/08-10

8.0mm

10

PRF/RP/EC/10-12

10.0mm

10

PRF/RP/EC/12-15

12.0mm

10

External Corner – 3.0 Metre Length Product

Code

Board Thickness

Black

White

Pack Size

PRF/RP/ECC/065

6.0mm

10

PRF/RP/ECC/085

8.0mm

10

PVC Joint Profile – 2.5 Metre Length Product

Code

Board Thickness

Black

White

Pack Size

PRF/RP/JB/065

6.0mm

10

PRF/RP/JB/085

8.0mm

10

PRF/RP/JB/010

10.0mm

10

PVC Joint Profile – 2.5 Metre Length Product

Code

Board Thickness

Black

White

Pack Size

PRF/RP/SG/065

6.0mm

10

PRF/RP/SG/085

8.0mm

10

PRF/RP/SG/105

10.0mm

10

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Aluminium Profiles Profiles Aluminium 64

External Corner – 3.0 Metre Length Product

Code

Height of Box (mm)

Black

Standard

Woodgrain

Metallic

Chameleon

PRF/AL/EC/08

8.5

PRF/AL/EC/10

10.8

PRF/AL/EC/12

12.8

Colour Options

External Corner – 3.0 Metre Length Product

Code

Height of Box (mm)

Black

Standard

Woodgrain

Metallic

Chameleon

PRF/AL/ECA/06

6.5

PRF/AL/ECA/08

8.5

PRF/AL/ECA/10

10.5

Colour Options

Internal Corner – 2.5 Metre Length Product

Code

Height of Box (mm)

Black

Standard

Woodgrain

Metallic

Chameleon

PRF/AL/IC/W/12

12.0

PRF/AL/IC/W/20

20.0

t: +44(0)1782 629 270  +44 (0) 1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

Colour Options

: www.mainlineproducts.co.uk


Aluminium Profiles 65

Aluminium Profiles

Aluminium Joint Profile (Birds Beak) – 2.5 Metre Product

Code

PRF/AL/BB/06/BL/2.5

Colour Options

Size (mm)

Black

Standard

Woodgrain

Metallic

Chameleon

65mm

Aluminium Joint Profile (Birds Beak) – 3.0 Metre Product

Colour Options

Size (mm)

Black

Standard

Woodgrain

Metallic

Chameleon

PRF/AL/BB/06/BL/3.0

65mm

PRF/AL/BB/47/BL/3.0

47mm

Code

Aluminium Flat Strip – 2.5 Metre Product

Code

PRF/AL/JPF/65/2500/B

Colour Options

Size (mm)

Black

Standard

Woodgrain

Metallic

Chameleon

65mm

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Cutting Tools Cutting Tools 66 HSS Step Drills One step drill bit for drilling aluminium sub frame and panel simultaneously

Product Code STEP-049070 STEP-049080 STEP-049085 STEP-049090 STEP-049010 STEP-051070 STEP-051080 STEP-051085 STEP-051090 STEP-051010

First Diameter (mm)

Second Diameter (mm)

4.9

8.0

4.9 x 8.0mm Step Drill

9.0

4.9 x 9.0mm Step Drill

4.9

7.0

4.9

8.5

4.9 4.9

10.0

5.1

8.0

5.1 5.1 5.1 5.1

Details

Box Qty

4.9 x 70mm Step Drill

1

4.9 x 8.5mm Step Drill

1

4.9 x 10.0mm Step Drill

7.0

5.1 x 7.0mm Step Drill

8.5

5.1 x 8.5mm Step Drill

9.0

10.0

5.1 x 8.0mm Step Drill 5.1 x 9.0mm Step Drill

5.1 x 10.0mm Step Drill

1 1 1 1 1 1 1 1

Carbide Drills A long-lasting drill bit designed for drilling clean undamaged holes in Fibre Cement Panels

ProductCode CAR-030046 CAR-041055 CAR-049062 CAR-050062

CAR-051062 CAR-055066 CAR-060066 CAR-065070 CAR-070074 CAR-080079 CAR-083079 CAR-085079 CAR-090084 CAR-095084 CAR-110095

Diameter (mm) 3.0 4.1 4.9 5.0 5.1 5.5 6.0 6.5 7.0 8.0 8.3 8.5 9.0 9.5

11.0

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

Length (mm) 16

Details

Box Qty

3.0 x 16mm Flute x 46mm Long

1

4.9 x 26mm Flute x 62mm Long

1

5.1 x 26mm Flute x 62mm Long

1

6.0 x 28mm Flute x 66mm Long

1

22

4.1 x 22mm Flute – 55mm Long

26

5.0 x 26mm Flute x 62mm Long

26 26 28 28 31 34 37 37 37 40 40 47

5.5 x 28mm Flute x 66mm Long 6.5 x 31mm Flute x 70mm Long 7.0 x 34mm Flute x 74mm Long 8.0 x 37mm Flute x 79mm Long 8.3 x 37mm Flute x 79mm Long

1

1 1

8.5 x 37mm Flute x 79mm Long

1

9.5 x 40mm Flute x 84mm Long

1

9.0 x 40mm Flute x 84mm Long 11.0x 47mm Flute x 95mm Long

: www.mainlineproducts.co.uk

1 1


Cutting Tools 67

Cutting Tools

Ground HSS Drill Bits (Standard) – Din 338 RN For Timber and Aluminium Product

Code

Size (mm)

HDRSTG2.0

HSS ground drill bit 2.0mm

HDRSTG3.0

HSS ground drill bit 3.0mm

HDRSTG2.5 HDRSTG3.5 HDRSTG3.6 HDRSTG4.0 HDRSTG4.1 HDRSTG4.2 HDRSTG4.5 HDRSTG4.9 HDRSTG5.0 HDRSTG5.1 HDRSTG5.5 HDRSTG6.0 HDRSTG6.5 HDRSTG7.0 HDRSTG7.5 HDRSTG8.0 HDRSTG8.5 HDRSTG9.0

HSS ground drill bit 4.0mm HSS ground drill bit 4.1mm HSS ground drill bit 4.2mm

HSS ground drill bit 4.5mm HSS ground drill bit 4.9mm HSS ground drill bit 5.0mm

HSS ground drill bit 5.1mm HSS ground drill bit 5.5mm HSS ground drill bit 6.0mm

HSS ground drill bit 6.5mm HSS ground drill bit 7.0mm HSS ground drill bit 7.5mm

HSS ground drill bit 8.0mm HSS ground drill bit 8.5mm HSS ground drill bit 9.0mm

HSS ground drill bit 11.0mm

HDRSTG12.5 HDRSTG13.0

10

HSS ground drill bit 3.6mm

HDRSTG11.0 HDRSTG12.0

30

HSS ground drill bit 3.5mm

HSS ground drill bit 10.0mm

HDRSTG11.5

Box Qty

HSS ground drill bit 2.5mm

HDRSTG10.0 HDRSTG10.5

Flute Length (mm)

HSS ground drill bit 10.5mm HSS ground drill bit 11.5mm

24

10

33

10

39 39 43 41 43 47 52 52 52 57 57 63 69 69 75 75 81 87 87 94 94

HSS ground drill bit 12.0mm

101

HSS ground drill bit 13.0mm

101

HSS ground drill bit 12.5mm

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

101

10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5

 +44 (0) 1782 629 270 : www.mainlineproducts.co.uk


Cutting Tools Cutting Tools 68

Ground HSS Drill Bits (Long Series) – Din 338 RN For Timber and Aluminium Product

Code

Size (mm)

Flute Length (mm)

Box Qty

HDRLG2.0

HSS Long series drill bit 2.0mm

56

10

HDRLG2.5

HSS Long series drill bit 2.5mm

62

10

HDRLG3.0

HSS Long series drill bit 3.0mm

66

10

HDRLG3.5

HSS Long series drill bit 3.5mm

69

10

HDRLG4.0

HSS Long series drill bit 4.0mm

78

10

HDRLG4.2

HSS Long series drill bit 4.2mm

78

10

HDRLG4.5

HSS Long series drill bit 4.5mm

80

10

HDRLG4.8

HSS Long series drill bit 4.8mm

87

10

HDRLG5.0

HSS Long series drill bit 5.0mm

87

10

HDRLG5.5

HSS Long series drill bit 5.5mm

91

10

HDRLG6.0

HSS Long series drill bit 6.0mm

91

10

HDRLG6.5

HSS Long series drill bit 6.5mm

97

5

HDRLG7.0

HSS Long series drill bit 7.0mm

102

5

HDRLG8.0

HSS Long series drill bit 8.0mm

109

5

HDRLG9.0

HSS Long series drill bit 9.0mm

115

5

HDRLG10.0

HSS Long series drill bit 10.0mm

121

5

t: +44(0)1782 629 270 sales@mainlineproducts.co.uk +44 (0) 1782 629 270 e: w: mainlineproducts.co.uk sales@mainlineproducts.co.uk

: www.mainlineproducts.co.uk


Coating Warranty

Coating Warranty 69 Coating Warranty Coating Warranty

Mainline Products (UK) Limited’s Coating Performance 25 Year Warranty 1 . General Mainline Products (UK) Limited’s Coating Performance 25 Year Year Warranty Warranty Mainline Products Limited’s Performance 25 1.1. Subject to and upon(UK) the following terms Coating and conditions, Mainline Products (UK) Limited (company number: 07003332) (Mainline) offers a warranty (Warranty) for 25 years commencing on the date of delivery (Warranty Period) to customers within the European Union (Eligible Customers) in respect 11. . General General of the Colourfix and Metalix coatings provided by MainlineMainline on screws and rivets (Goods). 1.1. Subject Products (UK) Limited(company (companynumber: number:07003332) 07003332)(Mainline) (Mainline)offers offersa awarranty warranty 1.1. Subjectto toand andupon uponthe the following following terms terms and and conditions, conditions, Mainline Products (UK) Limited 1.2. For the avoidance of doubt, the Warranty is date offered in respect of the Colourfix and Metalix paint coating only (Coating) and is notCustomers) applicable to respect the (Warranty) for 25 years commencing on the of delivery (Warranty Period) to customers within theEuropean European Union(Eligible (Eligible (Warranty) for 25 years commencing on the date of delivery (Warranty Period) to customers within the Union Customers) ininrespect screws and rivetsand upon whichcoatings the coating is applied nor is iton applicable to any other Mainline products supplied to Eligible Customers or any other ofofthe screws and and rivets (Goods). theColourfix Colourfix andMetalix Metalix coatings provided provided by by Mainline Mainline on screws rivets (Goods). customers. 1.2. For respect of of the the Colourfix Colourfix and andMetalix Metalixpaint paintcoating coatingonly only(Coating) (Coating)and andisisnot notapplicable applicabletotothe the 1.2. Forthe theavoidance avoidanceof ofdoubt, doubt,the the Warranty Warranty is is offered offered in in respect 1.3. This Warranty is subjectwhich to Mainline’s standard terms and Conditions), a copy ofsupplied which are attached to this Warranty. screws is it itconditions applicable(Terms to any anyand other Mainlineproducts products EligibleCustomers Customers anyother other screwsand andrivets rivetsupon upon which the the coating coating is is applied applied nor nor is applicable to other Mainline supplied totoEligible ororany 1.4. If there is any conflict between the terms of this Warranty and the Terms and Conditions, the Terms and Conditions shall prevail. customers. customers. 2 . Warranty and Warranty Conditions 1.3. This conditions (Terms (Terms and andConditions), Conditions),aacopy copyofofwhich whichare areattached attachedtotothis thisWarranty. Warranty. 1.3. ThisWarranty Warrantyisissubject subjectto toMainline’s Mainline’s standard standard terms terms and and conditions Mainline to replace defective Coating Coatingand thatthe hasTerms become from Goods) shall (taking account of fair wear and 1.4. IfIfthere any between the of this and the Terms andcompletely Conditions,removed theTerms Terms andthe Conditions shallprevail. prevail. 1.4. thereisisoffers anyconflict conflict between the terms terms of (being this Warranty Warranty and Conditions, the and Conditions tear of theand Coating and any external factors that may impact upon the durability of the Coating) during the Warranty Period provided the Eligible 22. . Warranty Warranty Conditions Warranty and Warranty Conditions Customer can provide evidence satisfactory Mainline thatthat thehas Eligible Customer has complied the following conditions since of Mainline to defective Coating (being Coating that has become completely removedwith from the Goods)(taking (taking account fairdate wear and Mainlineoffers offers toreplace replace defective Coating to (being Coating become completely removed from the Goods) account ofofthe fair wear and delivery of the Goods to the Eligible Customer: tear of the Coating and any external factors that may impact upon the durability of the Coating) during the Warranty Period provided the Eligible tear of the Coating and any external factors that may impact upon the durability of the Coating) during the Warranty Period provided the Eligible 2.1 Storage and handling the Goods Customer can provide satisfactory that the the Eligible Eligible Customer Customerhas hascomplied compliedwith withthe thefollowing followingconditions conditionssince sincethe thedate dateofof Customer can provideofevidence evidence satisfactory to Mainline that The Goods have been to stored packaged, in dry conditions at room temperature ideally covered and, in a dust free environment with minimum delivery ofofthe Customer: delivery theGoods Goods tothe theEligible Eligible Customer: handling of the Goods.of 2.1 Storage handling 2.1 Storageand and handling ofthe theGoods Goods 2.2 Installation into Customer products The been packaged, in temperature ideally ideallycovered coveredand, and,ininaadust dustfree freeenvironment environmentwith withminimum minimum TheGoods Goodshave haveEligible beenstored stored packaged, in dry conditions at room temperature a) If the Goods have been installed into Eligible Customer products, the Goods have been installed with Mainline tools and in accordance with panel handling ofofthe handling theGoods. Goods. manufacturers’ hole size recommendations. 2.2 Installation into Customer products 2.2 Installation intoEligible Eligible Customer products b) life expectancy of the Coating may be significantly reduced ifthe theGoods Goodshave are been installed in or with exposed to conditions influenced by acid, a)a) The IfIfthe Goods have installed into Eligible Customer products, products, the Goods have beeninstalled installed withMainline Mainline toolsand andheavily accordance with panel the Goods havebeen been installed into tools ininaccordance with panel industrial chemicals, salt and other aggressive emission sources known to damage coated products. manufacturers’ hole recommendations. manufacturers’ holesize sizewater recommendations. 2.3 Rivets b) The Thelife lifeexpectancy expectancyof ofthe the Coating Coating may be significantly reduced b) reduced ifif the the Goods Goodsare areinstalled installedininor orexposed exposedtotoconditions conditionsheavily heavilyinfluenced influencedbybyacid, acid, When using and chemicals, dealing with rivet Goods, Eligible Customer mustsources never use a worn drill bit coated for the products. drilling of panels and must always ensure that industrial chemicals, salt water and the emission known to industrial salt water and other aggressive emission sources known todamage damage coated products. the hole sizes are drilled to the manufacturers’ recommendation. 2.3 Rivets 2.3 Rivets 2.4 Screws Whenusing usingand anddealing dealingwith with rivet rivet Goods, Goods, the Eligible Customer must When must never never use use aaworn worndrill drillbit bitfor forthe thedrilling drillingofofpanels panelsand andmust mustalways alwaysensure ensurethat that When using and dealing screw Goods, the recommendation. correct screwdriver part for the screw and the fitting must be used and the Eligible Customer must thehole hole sizes are drilledwith tothe the manufacturers’ the sizes are drilled to manufacturers’ always 2.4 Screwsuse new screwdriver parts when dealing with the screw Goods. Worn screwdriver parts can ‘free spin’ in the screw recess causing paint 2.4 Screws damage or removal. Whenusing using anddealing dealingwith with screw screw Goods, Goods, the correct screwdriver part When and part for for the the screw screwand andthe thefitting fittingmust mustbe beused usedand andthe theEligible EligibleCustomer Customermust must 2.5 Profiles and other special parts alwaysuse usenew new screwdriver parts when when dealing dealing with the screw Goods. always screwdriver parts Goods. Worn Worn screwdriver screwdriverparts partscan can‘free ‘freespin’ spin’ininthe thescrew screwrecess recesscausing causingpaint paint a) The Goods must not come into contact with any dissimilar metals. The reason for this condition is that when two dissimilar metals meet, the damageor orremoval. removal. damage weaker ofspecial the two metals, if exposed to electrolytes, corrodes. 2.5 Profilesand andother other special parts 2.5 Profiles parts TheGoods Goodsmust mustnot notbe come into contact contact with any dissimilar metals. b) The exposed to heatwith in excess of 70°C/158°F. a)a) The Goods must not come into any dissimilar metals. The The reason reasonfor forthis thiscondition conditionisisthat thatwhen whentwo twodissimilar dissimilarmetals metalsmeet, meet,the the weaker ofthe thetwo twometals, metals, ifif exposed exposed to to electrolytes, electrolytes, corrodes. 2.6 Cleaning weaker and Maintenance of corrodes. TheGoods Goodsmust mustnot notcorrectly be exposed exposed to heat heatPrior in excess excess 70°C/158°F. a) The Goods must be cleaned. to anyof of the Goods, Mainline recommends a small test area is selected to ensure the b)b) The be to in ofcleaning 70°C/158°F. 2.6 Cleaningselected andMaintenance Maintenance cleaning products are safe to use. 2.6 Cleaning and TheGoods Goodsmust mustonly be correctly correctly cleaned. Prior to any cleaning the Mainline aasmall area ensure the b) The be cleaned using aPrior softto cloth sponge,of warm water andrecommends a mild detergent (ph.test between 5selected –selected 8). Thetoto Goods should a)a) The Goods must be cleaned. anyor cleaning ofusing the Goods, Goods, Mainline recommends small test areaisis ensure the selected cleaning products are safe safe to use. use.and the Goods should be cleaned gently without extensive rubbing. not be cleaned with any abrasive material selected cleaning products are to TheGoods Goods mustaggressive only be be cleaned cleaned using soft clothabrasive or using water mild (ph. 5 5– –8).8).The should c)b) Paint removers, alkaline, acids, petrol, detergents, detergents oraasolutions containing ester, ketones, alcohol, aromatics, b) The must only using aa soft cloth or sponge, sponge, using warm warm waterand and milddetergent detergent (ph.between between TheGoods Goods should not be cleaned with any abrasive material and the Goods should be cleaned gently without extensive rubbing. ethylene glycol or halogenated hydrocarbon should never be used on the Goods. not be cleaned with any abrasive material and the Goods should be cleaned gently without extensive rubbing. Paint removers, aggressive alkaline, acids, acids, petrol, petrol, abrasive 2.7 Frequency of Cleaning andaggressive Maintenance c)c) Paint removers, alkaline, abrasive detergents, detergents, detergents detergentsor orsolutions solutionscontaining containingester, ester,ketones, ketones,alcohol, alcohol,aromatics, aromatics, ethylene glycol or halogenated hydrocarbon should never be used on the Goods. a) The Goods have been cleaned to the frequency and standard required of the environment in which the Goods are situated and the products ethylene glycol or halogenated hydrocarbon should never be used on the Goods. 2.7 Frequency ofCleaning Cleaning andMaintenance Maintenance of of which the Goods form part taking account of all environmental and weather conditions to which the Goods are exposed. At least 1 annual 2.7 Frequency and TheGoods Goods havebeen been cleaned to the the frequency frequency required of clean is required as a part of a required cleaningand andstandard maintenance programme. a)a) The have cleaned to and standard required ofthe theenvironment environmentininwhich whichthe theGoods Goodsare aresituated situatedand andthe theproducts products of which the as Goods form part taking account ofofall environmental and weather conditions to which the Goods arelocation exposed. At least b) Factors such the surrounding environment any building in which the Goods are located, the geographical of any such building of which the Goods form part taking account of all environmental and weather conditions to which the Goods are exposed. At least1 1annual annual clean is protection required as a part of to a required cleaning and maintenance programme. and that building, prevailing wind direction, atmospheric pollution, airborne debris such as sand/dust, change in cleanthe is required as afforded a part of a required cleaning and maintenance programme. b) Factors such location as the surrounding environment of any building in which the Goods are located, the geographical location of any such building geographical of the Goods can cause the Goods to diminish in quality at different degrees as a result, significantly the life b) Factors such as the surrounding environment of any building in which the Goods are located, theand, geographical location of anyreduce such building and the protection afforded to that building, prevailing wind direction, atmospheric pollution, airborne debris such as sand/dust, change in expectancy of the Coating. and the protection afforded to that building, prevailing wind direction, atmospheric pollution, airborne debris such as sand/dust, change in geographical location of the Goods can cause the Goods to diminish in quality at different degrees and, as a result, significantly reduce the life 3. Additional terms geographical location of the Goods can cause the Goods to diminish in quality at different degrees and, as a result, significantly reduce the life expectancy of the Coating. 3.1 In order for any Eligible Customer claim for replacement to be considered under this Warranty, the Eligible Customer must notify Mainline of such expectancy of the Coating. 3. Additional terms claim and provide 3. Additional terms the evidence required to show satisfaction of compliance with the above conditions within 20 Business Days of the Eligible 3.1 In order for any Eligible Customer claim for replacement to be considered under this Warranty, the Eligible Customer must notify Mainline of such Customer aware of the defective Coating. 3.1 In order forbecoming any Eligible Customer claim for replacement to be considered under this Warranty, the Eligible Customer must notify Mainline of such and provide the evidence required to show satisfaction of compliance with the aboveofconditions within 20 be Business Daysby ofthe theEligible Eligible Customer 3.2 Ifclaim the conditions out at clauses 2.1 to to 2.7 havesatisfaction not been complied with, or if evidence compliance cannot produced claim and provideset the evidence required show of compliance with the above conditions within 20 Business Days of the Eligible Customer becoming aware of the defective Coating. to Mainlinebecoming on request, the of Warranty is rendered invalid and Mainline will have no liability under this Warranty in respect of any claim. Customer aware the defective Coating. 3.2 If the conditions set out at clauses 2.1 to 2.7 have not been complied with, or if evidence of compliance cannot be produced by the Eligible Customer 3.2 If the conditions set out at clauses 2.1 to 2.7 have not been complied with, or if evidence of compliance cannot be produced by the Eligible Customer to Mainline on request, the Warranty is rendered invalid and Mainline will have no liability under this Warranty in respect of any claim. to Mainline on request, the Warranty is rendered invalid and Mainline will have no liability under this Warranty in respect of any claim.

If you are unsure about any of the conditions in this Warranty, please contact Mainline If you are unsure about any of the this Warranty, Mainline theunsure earliest opportunity to conditions avoid beingin breach of theplease abovecontact conditions. If youatare about any of the conditions ininthis Warranty, please contact Mainline at the earliest opportunity to avoid being in breach of the above conditions. at the earliest opportunity to avoid being in breach of the above conditions.

 +44 (0) 1782 629 270  +44 (0) 1782 629 270 : www.mainlineproducts.co.uk  +44 (0) 1782 629 270  sales@mainlineproducts.co.uk : www.mainlineproducts.co.uk  sales@mainlineproducts.co.uk : www.mainlineproducts.co.uk

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk sales@mainlineproducts.co.uk


Coating Performance Test Certificate 70 Coating Performance Test Certificate

Coating Warranty Coating Warranty

Mainline Products (UK) Limited’s Coating Performance 25 Year Warranty 1. General Mainline Coatings DatatheSheet Mainline Products Limited’s Performance 25(UK) Year Warranty 1.1. Subject to and upon(UK) following terms Coating and conditions, Mainline Products Limited (company number: 07003332) (Mainline) offers a warranty

(Warranty) for 25 years on the date ofCoat delivery (Warranty Period) to customers within the European Union (Eligible Customers) in respect Mainline Multi-Component Semicommencing Matt Primer/Finishing 1. General

of the Colourfix and Metalix coatings provided by Mainline on screws and rivets (Goods). Subject to and upon the following terms and conditions, Mainline Products (UK) Limited (company number: 07003332) (Mainline) offers a warranty For the avoidance of doubt, the Warranty is offered in respect of the Colourfix and Metalix paint coating only (Coating) and is not applicable to the (Warranty) for 25 years commencing onASTM/BS the date of delivery (Warranty Period) to Result customers within the European Union (Eligible Customers) in respect Test Number screws and rivets upon which the coating is applied nor is it applicable to any other Mainline products supplied to Eligible Customers or any other of the Colourfix and Metalix coatings provided by Mainline on screws and rivets (Goods). customers. 1.2. Weathering For the avoidance of doubt, the Warranty is offered in respect of the Colourfix andPass Metalix (Coating) and is not applicable to the Artificial Test 5000paint hourscoating Colouronly Change 1.3. This Warranty is subject to Mainline’s standard terms and conditions (Terms and Conditions), a copy of which are attached to this Warranty. BS EN ISO 11507 Mainline ∆E products supplied to> Eligible (UV & Water)screws and rivets upon which the coating is applied nor is it applicable to any other <0.45units Gloss Retention 80% Customers or any other 1.4. If there is any conflict between the terms of this Warranty and the Terms and Conditions, the Terms and Conditions shall prevail. customers. Corrosion / Salt Spray Test BS EN ISO 9227 – NSS Test Pass – 5000 Hours 2. Warranty and Warranty Conditions 1.3. This Warranty is subject to Mainline’s standard terms and conditions (Terms and Conditions), a copy of which are attached to this Warranty. Mainline to replace defective Coating Coatingand thatthe hasTerms become Goods) shall (taking account of fair wear and Pull Off Testisoffers ASTM D4541-09el Averageremoved > 2000psi Verythe Strong 1.4.Adhesion If there any conflict between the terms of (being this Warranty andcompletely Conditions, the Termsfrom and Conditions prevail. tear of the Coating and any external factors that may impact upon the durability of the Coating) during the Warranty Period provided the Eligible 2. Warranty and Warranty Conditions Scratch / Hardness Testcan provide evidence satisfactory BS EN ISO 1518 –that 1: the Eligible Customer Nohas Penetration - Passthe 2.5kg Customer Mainline complied conditions since Mainline offers to replace defective Coating to (being Coating that has become completely removedwith from thefollowing Goods) (taking account of the fair date wearof and delivery of the Goods to the Eligible Customer: Cross Cut Adhesion Test BS EN ISO 2409: Class 0 tear of the Coating and any external factors that may impact upon the durability of the Coating) during the Warranty Period provided the Eligible 2.1 Storage andcan handling the Goods Customer provideofevidence satisfactory to Mainline the Eligible CustomerNo has complied with the following conditions since the date of Humidity Test (Cyclic Condensation) BSdry 3900 Part F2:that Defects – Pass Hours The Goods been stored packaged, in conditions at room temperature ideally covered and, 5000 in a dust free environment with minimum delivery ofhave the Goods to the Eligible Customer: handling of the Goods.of the Goods Impact Test 2.1Resistance Storage and handling BS 3900 Part E7: No Defects – Pass 2.2 Ball Test Installation Customer products (Falling 1kg) into The–Goods haveEligible been stored packaged, in dry conditions at room temperature ideally covered and, in a dust free environment with minimum a)handling If the Goods have been installed into Eligible Customer products, the Goods have been installed with Mainline tools and in accordance with panel of the Goods. manufacturers’ hole size recommendations. 2.2 Installation into Eligible Customer products Test Characteristics b)a) The lifeGoods expectancy of the Coating may be significantly reduced ifthe theGoods Goodshave are been installed in or with exposed to conditions influenced acid, If the have been installed into Eligible Customer products, installed Mainline tools and heavily in accordance withby panel industrial chemicals, salt other aggressive known to damage coated products. manufacturers’ holedefects sizewater recommendations. Artificial Weathering No visible or and discernible change ofemission colour orsources gloss when viewed b) The life expectancy of theeye. Coating may be significantly reduced if the Goods are installed in or exposed to conditions heavily influenced by acid, (UV2.3 & Water)Rivets with the naked When using and dealing with rivet Goods, Eligible Customer must never use a worn drill bit coated for the products. drilling of panels and must always ensure that industrial chemicals, salt water and other aggressive emission sources known Stainless Steel No the defects, blistering, under film corrosion orto damage the hole sizes arePanel drilled to the manufacturers’ recommendation. 2.3 Rivets coating detachment after 5000 hours Corrosion Spray 2.4 / Salt Screws When using and dealing with rivet Goods, the Eligible Customer mustfilm never use a worn No defects, blistering, under corrosion or drill bit for the drilling of panels and must always ensure that Rivets & Screws When using and dealing with screw Goods, the correct screwdriver part for the screw and the fitting must be used and the Eligible Customer must the hole sizes are drilled to the manufacturers’ recommendation. coating detachment from fixings after 5000 hours always 2.4 Screwsuse new screwdriver parts when dealing with the screw Goods. Worn screwdriver parts can ‘free spin’ in the screw recess causing paint Test 1 Slightthe cohesive coating upperand surface at 2400psi Excellent Result must damage or removal. When using and dealing with screw Goods, correctdetachment screwdriver of part for thetoscrew the fitting must be used and the Eligible Customer 2.5 Profiles otherscrewdriver special parts always and use new parts when dealing with the screw Goods. Worn screwdriver parts can ‘free spin’ in the screw recess causing paint Test 2 Slight cohesive detachment of coating to upper surface at 1750psi Very Good Result a)damageThe Goods must not come into contact with any dissimilar metals. The reason for this condition is that when two dissimilar metals meet, the or removal. Pull Off Adhesion of the3twoparts metals, if exposed to electrolytes, corrodes. 2.5 Profiles weaker and other special Test Slight cohesive detachment of coating to upper surface at 2300psi Excellent Result TheGoods Goodsmust mustnot notbe come into contact any dissimilar metals. The reason for this condition is that when two dissimilar metals meet, the b)a) The exposed to heatwith in excess of 70°C/158°F. weaker of the two metals, if exposed to electrolytes, corrodes. 2.6 Cleaning and Maintenance Result exhibited very strong adhesion properties to HR Steel panel TheGoods Goods must must be notcorrectly be exposed to heatPrior in excess 70°C/158°F. a)b) The cleaned. to anyofcleaning of the Goods, Mainline recommends a small test area is selected to ensure the Test 1: products are3safe teststoatuse. 2.5kg, slight mark left in coating but no penetration. Satisfactory Result 2.6 Cleaningselected and Maintenance cleaning Scratch / Hardness TheGoods Goodsmust mustonly be correctly cleaned. anyor cleaning the Goods, Mainline a small area is5selected ensureshould the b)a) The be cleaned using aPrior softto cloth sponge,ofusing warm water andrecommends a mild detergent (ph.test between – 8). ThetoGoods Test 2 teststoatuse. 2.5kg, slight mark left in coating but no penetration. Satisfactory Result selected cleaning products are3 safe not be cleaned with any abrasive material and the Goods should be cleaned gently without extensive rubbing. The Goods must only be cleaned using soft clothabrasive or ‘0’, sponge, using warm mild detergent (ph. between 5 – 8). The Goods should 3 tests allaclassification nodetergents, detachment ofwater andora solutions c)b) Paint removers, alkaline, acids, petrol, detergents containing ester, ketones, alcohol, aromatics, Stainlessaggressive Steel not be cleaned with any abrasive material and the Goods beon cleaned gently without extensive rubbing. coating observed ethylene glycol or halogenated hydrocarbon should nevershould be used the Goods. Cross Cut Adhesion c) Paint removers, alkaline, petrol, abrasive detergents or solutions containing ester, ketones, alcohol, aromatics, 3 testsacids, all classification ‘0’, nodetergents, detachment of 2.7 Frequency of Cleaning andaggressive Maintenance Aluminium: ethylene halogenated hydrocarbon should be used on the observed a) The Goodsglycol haveor been cleanedcoating to the frequency andnever standard required ofGoods. the environment in which the Goods are situated and the products 2.7 TestFrequency of Cleaning and Maintenance Humidity of which the Goods form part taking account of all environmental and weather conditions to which the Goods are exposed. At least 1 annual No defects including blistering, under film corrosion orrequired coatingof detachment after 5000 hours. a) The Goods have as been cleaned to the frequency the environment in which the Goods are situated and the products (Cyclic Condensation) clean is required a part of a required cleaningand andstandard maintenance programme. of which the as Goods form part taking account ofofall environmental and weather conditions to which the Goods arelocation exposed. least 1 annual Impact Resistance b) Factors such the surrounding environment any building in which the Goods are located, the geographical ofAt any such building Two impacts, no detachment, cracking, wrinkling or other programme. coating defects apparent. Satisfactory clean required asafforded a part of to a required cleaning and maintenance (falling Ball Test – 1kg)and theis protection that building, prevailing wind direction, atmospheric pollution, airborne debris such as sand/dust, change in b) Factors such location as the surrounding environment of any building in which the Goods are located, the geographical location of any such building geographical of the Goods can cause the Goods to diminish in quality at different degrees and, as a result, significantly reduce the life and the protection afforded to that building, prevailing wind direction, atmospheric pollution, airborne debris such as sand/dust, change in expectancy of the Coating. Test Conclusion geographical location of the Goods can cause the Goods to diminish in quality at different degrees and, as a result, significantly reduce the life 3. Additional terms Mainline Products Ltd expectancy Performance was benchmark tested based on the UK Network Rail coating approval test document NR/L3/CIV/039. This of coating the Coating. 3.1 In order for any Eligible Customer claim for replacement to be considered under this Warranty, the Eligible Customer must notify Mainline of such document states that 5000 hours accelerated weathering & other physical tests listed above may equate to a protective coating system providing 3. Additional terms claim and provide the evidence required to show satisfaction of compliance with the above conditions within 20 Business Days of the Eligible steelwork with a potential service life of up to 25 years first maintenance in railway environments (see Mainline Warranty conditions for façade industry 3.1 In order for any Eligible Customer claim forto replacement to be considered under this Warranty, the Eligible Customer must notify Mainline of such Customer becoming aware of the defective Coating. provisions) claim and provide the evidence required to show satisfaction of compliance with the above conditions within 20 Business Days of the Eligible 3.2 If the conditions set out at clauses 2.1 to 2.7 have not been complied with, or if evidence of compliance cannot be produced by the Eligible Customer CustomerPerformance becoming aware of the Additionally, Mainline Coating wasdefective found toCoating. offer very good resistance to colour change and loss of gloss during the 5000-hour UVA light to Mainline on request, the Warranty is rendered invalid and Mainline will have no liability under this Warranty in respect of any claim. 3.2 testIf the conditions set out at clauses 2.1 to 2.7 have not been complied with, or if evidence of compliance cannot be produced by the Eligible Customer exposure to Mainline on request, the Warranty is rendered and Mainline willofhave no liability under this resistance, Warranty inmaintaining respect of any claim. The results indicate the Mainline coating system appears fit forinvalid the intended purpose weathering & corrosion decorative properties and permanent adhesion when applied to aluminium alloys & stainless-steel rain screen accessories. 1.1. 1.2.

If you are unsure about any of the conditions in this Warranty, please contact Mainline If youatare any of the conditions this Warranty, contact Mainline earliest opportunity avoid beinginin breach of theplease above conditions. If you the areunsure unsureabout about any of to the conditions in this Warranty, please contact Mainline at the earliest opportunity to avoid being in breach of the above conditions. at the earliest opportunity to avoid being in breach of the above conditions.

 +44 (0) 1782 629 270  +44 (0) 1782 629 270 : www.mainlineproducts.co.uk  sales@mainlineproducts.co.uk : www.mainlineproducts.co.uk  sales@mainlineproducts.co.uk : www.mainlineproducts.co.uk

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk 270 sales@mainlineproducts.co.uk w: mainlineproducts.co.uk  +44 (0) 1782 629


Credit Application Form

Credit Application Form TO BE SUPPLIED BY MAINLINE

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk

71


72

Notes

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk


Notes

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk

73


It’s the attention to detail that has the most dramatic effects As leaders in the supply of accurately colour matched fasteners and profiles for the rainscreen cladding industry your projects have never been in more safer hands. At Mainline we’re all about colour and we’re rather good at making your projects look the very best they can be. We can faithfully colour match to any manufacturers cladding panel and provide you with any fastener or profile within 4 - 7 working days. Now that’s a service that’s hard to match!

Contact us to find out more

t: +44(0)1782 629 270 e: sales@mainlineproducts.co.uk w: mainlineproducts.co.uk