Page 1

Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

NOTE

600x770 Space Straight chrome towel rail from MHS ref: SPSC60/77

tower rail Bespoke sink in Caesarstone 1500x520mm (exact finish t.b.c)

cupboard cupboard

stairwell 2-1

master bathroom 2-3 tiled surface

ch:1020 wh:full height

tiled surface

600x770 Space Straight chrome towel rail from MHS ref: SPSC60/77

Neorest SE toilet with washlet by TOTO ref: CW997CH + Push plate ref: E00003 + Concealed cistern with installation frame ref: T9300048

draineddrying drying areaarea drained (set flush within floor) teak slats (setcovered flushwith within floor)

TOTO toilet centre pivot roof window velux 114x118mm white finish ref GGU ...

cupboard cupboard

sink

wardrobe (his)

A

Bespoke bath bath free instanding Caesarstone

B

(exact finish t.b.c) 1800x800mm

805 x 550mm Type 22 Carat

ch:860 wh:1335

ch:1005 wh:1365

tiled surface

ch:1005 wh:1365

new skylight new skylight over overshower shower VELUX VELUX 1400x900mm 1400x900mm

tower rail

drawers shelves

small fridge

1605 x 550mm Type 22 Carat

new skylight over dressing area SUNSQUARE 800x800

luggage space

master bedroom 2-2

805 x 550mm Type 22 Carat

ch:857 wh:1335

600x1200 Space Straight chrome towel rail from MHS (dual fuel) ref: SPSC60/120

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

-This drawing is to be read in conjunction with all the structural and mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions -The main contractor should be conversant with the statutory obligations under the CDM regulations -Temporary support should be provided to existing structure to be retained

1:50 @ A3 0

1

5M

Date: 29 - 10 - 10 Proposed Second Floor

Dwg no. 44BS-GA102 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

NOTE

RWP

6

5

4

light box

7

505 x 550mm Type 11Carat

3

cup board

cup board

1

corridor 1-4 bathroom D

5 steps R:161 T:280 PL: 32,8* 2

3

4

5

tower rail

shelves

1 tower rail

RISER

shelves

desk

bathroom C

bedroom 1-3

ch: 550 wh: 1823

bedroom 1-2

1605 x 400mm Type 22 Carat

walk-in shower

ch: 715 wh: 1720

1205 x 400mm Type 22 Carat

RWP

ch: 560 wh: 2040

ch: 665 wh: 1800

centre pivot roof window velux 114x118mm white finish ref GGU ...

bedroom 1-1

services

ch: 530 wh: 1800

2

1405 x 400mm Type 22 Carat

ch: 1135 wh: 794

16 steps R:202 T:259 PL: 37,9*

desk

low-level storage

RWP

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

-This drawing is to be read in conjunction with all the structural and mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions -The main contractor should be conversant with the statutory obligations under the CDM regulations -Temporary support should be provided to existing structure to be retained

1:50 @ A3 0

1

5M

Date: 29 - 10 - 10 Proposed First Floor

Dwg no. 44BS-GA101 44 Bradbourne Street - London


ENTERTAINING ROOM

SITTING ROOM

Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect EXERCISE AREA

A

NOTE -This drawing is to be read in conjunction with all the structural and mechanical engineer's drawings and specifications PLAYROOM -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions -The main contractor should be conversant with the statutory obligations under the CDM regulations -Temporary support should be provided to existing structure to be retained

ENTRANCE HALL

no. 42 Bradbourne Street

RWP

no. 44 Bradbourne Street

13 steps R:184 T:275 PL: 33,8*

SWP

7

6

5

4

3

2

2005 x 550mm Type 20 Carat

1

4

3

1

2

entrance hall 0-1 new glass wall

hallway 0-2

CORDIVARI Jungle VT 1500x500x80 SWP

glass floor

RISER

glass floor

kitchen 0-5

hob

glass balustrade

living room 0-3

dining room 0-3 dishwasher

glass floor

sink

1805 x 400mm Type 22 Carat

glass balustrade

void

RISER

2005 x 550mm Type 20 Carat

low-level light box

no. 44 Bradbourne Street

RWP

RWP

no. 46 Bradbourne Street

RWP

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

GARDEN ACCESS

1:50 @ A3 0

1

5M

Date: 29 - 10 - 10 Proposed Ground Floor

Dwg no. 44BS-GA100 44 Bradbourne Street - London

void


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

NOTE -This drawing is to be read in conjunction with all the structural and mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions -The main contractor should be conversant with the statutory obligations under the CDM regulations -Temporary support should be provided to existing structure to be retained

5

4

3

2

2005 x 550mm Type 20 Carat

PUMP sink+toilet

1 parents' desk

bathroom B

mirror

coridor 99-5

tower rail

Carribean 3 water softener 520x340mm h:1120mm

Vaillant ecoTEC VU GB 466 480x450mm h:800mm

family room 99-1

gym area 99-2

removable panels

full height storage extends under staircase

MAINS LOCATION gas / water / electricity

13 steps R:169 T:261 PL: 37,4* 6

7

mirror

PUMP concealed at low level for sink+toilet+shower sink+W/M light box

sink

mirror

bathroom A

hob

bedroom 99-6

Scubatank pump 570L 950x750mm h:1500mm

Geminox EBS300 dia. 600mm h:1600mm removable panel

2005 x 550mm Type 20 Carat

washing machine w 600mm d 600mm h 850mm

tower rail

dryer beneath w 600mm d 600mm h 850mm

rear lightwell 99-3

front lightwell 99-7

shelves

utility room 99-4

RWP

mirror

allow 120mm dia. opening in structural wall for drainage pipe to pass through at high level

CHANGE OF LEVEL IN STRUCTURAL SLAB

allow 120mm dia. opening in structural wall for drainage pipe to pass through at high level

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

CHANGE OF LEVEL IN STRUCTURAL SLAB

1:50 @ A3 0

1

5M

Date: 29 - 10 - 10 Proposed Basement

Dwg no. 44BS-GA099 44 Bradbourne Street - London


stairwell 2-1

comes on with wall light of floor below

smoke detector

D

SD

master bathroom 2-3

D A

A

A (6)

D D

motion sensor

SD

smoke detector

A D A D

D D (8) D

A

A A (1)

B

LIGHT CIRCUIT + switch id

master bedroom 2-2

A

B (3)

C (3)

B

LIGHT SWITCH + switch id + (gang no.)

motion sensor

C

WALL LIGHTS LOW VOLTAGE RECESSED DOWNLIGHTERS

C

LOW VOLTAGE RECESSED DOWNLIGHTERS (CABINETS/WARDROBES)

NOTE

RECESSED CEILING LIGHTS

Mains interlinked smoke detectors to BS 5839 Pt 6 to be provided in the locations shown

IP RATED UPLIGHTER EXTRACTOR

All switches to be from the 'Ultimate' screwless flat (metal) plate range by GET

SOCKET CONNECTED TO A LIGHT SWITCH

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

(finish is white metal with white interior (WPW) unless otherwise indicated)

DIMMABLE T5 BATTENS

-This drawing is to be read in conjunction with all the mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions

DIMMABLE T5 BATTENS INSTALLED VERTICALLY LED STRIPS (HIGH INTENSITY / IP RATED) LED STRIPS INSTALLED VERTICALLY

1:50 @ A3 0

1

5M

Date: 16 - 11 - 10 Proposed Second Floor - Lighting

Dwg no. 44BS-VL102 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

NOTE Mains interlinked smoke detectors to BS 5839 Pt 6 to be provided in the locations shown All switches to be from the 'Ultimate' screwless flat (metal) plate range by GET (finish is white metal with white interior (WPW) unless otherwise indicated) -This drawing is to be read in conjunction with all the mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions

D comes on with wall light of floor above

A C

A C

smoke detector

B

2

D

C

D

SD

A

C (8)

C

corridor 1-4

motion sensor

D

D

bathroom D

SD

A (6)

A bedroom 1-1

D

smoke detector

bathroom C

D (6)

E (6) E

C

smoke detector

E

smoke detector

SD

SD

A

RISER

G (6) G G

A H C E bedroom 1-2

C

E

G bedroom 1-3

B (2) motion sensor

B

E

RWP

E

G

F(2) F

H(2)

G

H RWP

G

A A (1)

LIGHT CIRCUIT + switch id

LIGHT SWITCH + switch id + (gang no.) WALL LIGHTS

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

C RWP

LOW VOLTAGE RECESSED DOWNLIGHTERS LOW VOLTAGE RECESSED DOWNLIGHTERS (CABINETS/WARDROBES) RECESSED CEILING LIGHTS IP RATED UPLIGHTER EXTRACTOR SOCKET CONNECTED TO A LIGHT SWITCH DIMMABLE T5 BATTENS LED STRIPS (HIGH INTENSITY / IP RATED)

1:50 @ A3 0

1

5M

Date: 16 - 11 - 10 Proposed First Floor - Lighting

Dwg no. 44BS-VL101 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

NOTE Mains interlinked smoke detectors to BS 5839 Pt 6 to be provided in the locations shown All switches to be from the 'Ultimate' screwless flat (metal) plate range by GET (finish is white metal with white interior (WPW) unless otherwise indicated) -This drawing is to be read in conjunction with all the mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions C

RWP SWP

C

4

smoke detector

D (3)

C (14)

C SD

entrance hall 0-1

SD

motion sensors

smoke detector

SD

smoke detector

C hallway 0-2

living room 0-3

3

1

2

door sensor

A

A

A (2) SWP

B

D

B (6)

B

RISER

Allow for 3 separate lines / circuits glass floor (switched internally) of outdoor lights (approx. 6no. low-voltage lights per line)

C D

C D

C

B

C

B

B

B

window sensor

heat sensor

window sensor

C

C C

dining room 0-3

void

window sensor

C RISER

C

kitchen 0-5

RWP

A A (1)

LIGHT CIRCUIT + switch id

RWP

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

C

LIGHT SWITCH + switch id + (gang no.) WALL LIGHTS LOW VOLTAGE RECESSED DOWNLIGHTERS LOW VOLTAGE RECESSED DOWNLIGHTERS (CABINETS/WARDROBES) RECESSED CEILING LIGHTS IP RATED UPLIGHTER EXTRACTOR SOCKET CONNECTED TO A LIGHT SWITCH DIMMABLE T5 BATTENS LED STRIPS (HIGH INTENSITY / IP RATED)

1:50 @ A3 0

1

5M

Date: 16 - 11 - 10 Proposed Ground Floor - Lighting

Dwg no. 44BS-VL100 44 Bradbourne Street - London

void


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

NOTE Mains interlinked smoke detectors to BS 5839 Pt 6 to be provided in the locations shown All switches to be from the 'Ultimate' screwless flat (metal) plate range by GET (finish is white metal with white interior (WPW) unless otherwise indicated)

E

F (4)

E

D

E (6)

F

PIR

B B

1

B motion sensor

D D

B

smoke detector

E

SD

E

smoke detector

SD

D

smoke detector

A

F

C C

E

F

smoke detector

bathroom A

A

SD

front lightwell 99-7

A (3)

C

A

bedroom 99-6

removable panel

A (1)

C window sensor

G

A

window sensor

C

utility room 99-4

rear lightwell 99-3

C

C (6)

D E

F

tower rail

B (6)

D (5)

family room 99-1

B

bathroom B

coridor 99-5

SD

gym area 99-2

B

PIR motion sensor

G (1)

LIGHT CIRCUIT + switch id

LIGHT SWITCH + switch id + (gang no.)

G

G (1)

RWP

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

-This drawing is to be read in conjunction with all the mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions

WALL LIGHTS LOW VOLTAGE RECESSED DOWNLIGHTERS LOW VOLTAGE RECESSED DOWNLIGHTERS (CABINETS/WARDROBES) RECESSED CEILING LIGHTS IP RATED UPLIGHTER EXTRACTOR SOCKET CONNECTED TO A LIGHT SWITCH DIMMABLE T5 BATTENS

1:50 @ A3

LED STRIPS (HIGH INTENSITY / IP RATED)

0

1

5M

Date: 16 - 11 - 10 Proposed Basement - Lighting

Dwg no. 44BS-VL099 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

shaver socket

PIR

entry phone

Switch

TOTO toilet

1-gang socket

master bathroom 2-3

stairwell 2-1 extractor

extractor 1-gang socket

T thermo stat

Switch

T

Switch

phone

Cat 5

master bedroom 2-2

2-gang socket

thermo stat

Switch

2-gang socket

2-gang socket

Cat 5

phone

2-gang socket

1-gang socket

NOTE All switches and sockets to be from the 'Ultimate' screwless flat (metal) plate range by GET The finish is white metal with white interior (WPW) unless otherwise indicated -Allow provision of power for all appliances / equipment shown

2-gang socket

small fridge

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

shaver socket

-This drawing is to be read in conjunction with all the mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions

REV 1: added entryphone (video) 0

1

5M

Date: 26 - 11 - 10 Proposed Second Floor - Electrical

1:50 @ A3 Dwg no. 44BS-VP102 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

NOTE All switches and sockets to be from the 'Ultimate' screwless flat (metal) plate range by GET The finish is white metal with white interior (WPW) unless otherwise indicated -Allow provision of power for all appliances / equipment shown -This drawing is to be read in conjunction with all the mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions 2 no. switched spurs

RWP

2 Switch

T thermo stat

2-gang socket

1-gang socket

corridor 1-4

Switch

2-gang socket

bedroom 1-1

T thermo stat

entry phone

electric UFH mat

Switch

bathroom D

1-gang socket

bathroom C

extractor

RISER

T thermo stat electric UFH mat shaver socket

T 2-gang socket

Switch

Cat 5

T

thermo stat

phone

thermo stat

Switch

2-gang socket

Switch 2-gang socket

Cat 5

2-gang socket

phone

bedroom 1-2

1-gang socket

1-gang socket

extractor

bedroom 1-3

RWP 2-gang socket

Switch

Switch

2-gang socket

2-gang socket

2-gang socket

REV 1: added entryphone (video) 0

1

5M

Date: 26 - 11 - 10 Proposed First Floor - Electrical

Cat 5

phone

RWP

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

shaver socket

1:50 @ A3 Dwg no. 44BS-VP101 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

NOTE All switches and sockets to be from the 'Ultimate' screwless flat (metal) plate range by GET The finish is white metal with white interior (WPW) unless otherwise indicated -Allow provision of power for all appliances / equipment shown

RWP SWP 4

2-gang socket

entrance hall 0-1

Cat 5

FM/TV SAT

2-gang socket

2-gang socket

thermo stat

switched spur

alarm entry keypad

hallway 0-2

Switch

Switch

T

2-gang socket

thermo stat

1-gang socket

SWP Switch

glass floor

entry phone

RISER

phone

1

2

1-gang socket

T Switch

3

1-gang socket

living room 0-3

kitchen 0-5

extractor hob extractor

2-gang socket

dining room 0-3

ALLOW FOR POWER SUPPLY TO FRONT AND BACK OF GARDEN

dishwasher

void 2-gang socket

Cat 5

phone

2-gang socket

Cat 5

8no. switched spurs

2-gang socket

2-gang socket

fridge phone

Cat 5

RWP

freezer

-oven -microwave

coffee machine

RISER

2-gang socket

RWP

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

-This drawing is to be read in conjunction with all the mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions

1:50 @ A3 0

1

5M

Date: 16 - 11 - 10 Proposed Ground Floor - Electrical

Dwg no. 44BS-VP100 44 Bradbourne Street - London

void


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

T thermo stat

PUMP sink+toilet

T thermo stat

2-gang socket

Cat 5 HUB

Switch

phone HUB

TV HUB

Alarm HUB

3 no. switched spurs

Electrical Mains + distribution & fuse boards

1 2-gang socket

entry phone

home office coridor 99-5

Switch phone

Cat 5

2-gang socket

2-gang socket

phone

Cat 5

FM/TV SAT

2-gang socket

2-gang socket

2-gang socket

switched spur

bathroom B

T thermo stat

Switch

tower rail

extractor

2-gang socket

Vaillant ecoTEC VU GB 466 480x450mm h:800mm

2-gang socket

gym area 99-2

PUMP concealed at low level for sink+toilet+shower sink+W/M

2-gang socket

Sump Pump

T

shaver socket

utility room 99-4

fridge

Switch

thermo stat

washing machine w 600mm d 600mm h 850mm electric UFH mat

rear lightwell 99-3

2-gang socket Cat 5

phone

extractor

phone

Sump Pump Cat 5

2-gang socket

Sump Pump

front lightwell 99-7

switched spur

bathroom A

2-gang socket Cat 5

1-gang socket

bedroom 99-6

1-gang socket

Switch

hob

dryer beneath w 600mm d 600mm h 850mm

2-gang socket

thermo stat

T

family room 99-1

FM/TV SAT

2-gang socket

Switch

removable panel

Geminox EBS300 dia. 600mm h:1600mm

10 no. switched spurs

Scubatank pump 570L 950x750mm h:1500mm

Cat 5

Carribean 3 water softener 520x340mm h:1120mm

2-gang socket

Switch

phone

2-gang socket RWP

extractor

NOTE

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

Switch

All switches and sockets to be from the 'Ultimate' screwless flat (metal) plate range by GET The finish is white metal with white interior (WPW) unless otherwise indicated -Allow provision of power for all appliances / equipment shown -This drawing is to be read in conjunction with all the mechanical engineer's drawings and specifications -All works to be in accordance with current building regulations, relevant codes of practice and British Standards -All items to be installed according to manufacturers' instructions

1:50 @ A3 0

1

5M

Date: 16 - 11 - 10 Proposed Basement - Electrical

Dwg no. 44BS-VP099 44 Bradbourne Street - London


Insert between joist of flat roof 2 layers of 100 mm Celotex GA3100 rigid board insulation

Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing All dimensions to be confirmed on site and any discrepancies to be reported to the architect

0

1

2x12.5mm foil-backed plasterboard suspended ceiling

5M

-70mm Gyproc Thermaline Super -65mm foil-faced Celotex GA3065 rigid insulation boards between rafters

h: 2338

Insert between joists 2 layers of 150mm Isover 'APR 1200' acoustic roll insulation (glassmineral wool) tightly packed + joints staggered over entire floor (not shown for clarity) Fill cavity with tightly packed layers of 150mm Isover 'APR 1200' roll insulation (glassmineral wool) -engineered european oak 20mm floorboards -18mm WBP plywood subfloor

Fill cavity with tightly packed layers of 150mm Isover 'APR 1200' roll insulation (glassmineral wool)

Insert between joists 2 layers of 150mm Isover 'APR 1200' acoustic roll insulation (glassmineral wool) tightly packed + joints staggered

60mm Gyproc Thermaline Super

h: 2796

2x12.5 foil-backed plasterboard suspended ceiling

2x12.5 foil-backed plasterboard suspended ceiling

-engineered european oak 20mm floorboards -18mm WBP plywood subfloor

Insert between joists 2 layers of 150mm Isover 'APR 1200' acoustic roll insulation (glassmineral wool) tightly packed + joints staggered over entire floor (not shown for clarity)

h: 2623

60mm Gyproc Thermaline Super

Insert between joists 2 layers of 150mm Isover 'APR 1200' acoustic roll insulation (glassmineral wool) tightly packed + joints staggered over entire floor (not shown for clarity)

existing joists

-engineered european oak 20mm floorboards -18mm WBP plywood subfloor 2x12.5 foil-backed plasterboard suspended ceiling

existing joists

Insert between joists 2 layers of 150mm Isover 'APR 1200' acoustic roll insulation (glassmineral wool) tightly packed + joints staggered over entire floor (not shown for clarity)

h: 3196

12.5 suspended foil-backed plasterboard ceiling

-50x100cm porcelain tiles -18mm WBP plywood subfloor -new timber joists to engineer's details/spec

h: 2348

-retain existing ceiling -fix all holes after demolition -upgrade to 1h fire protection (2x12.5mm plasterboard) -Allow calcium silicate boards around structural elements

internal window

Insert between joists 2 layers of 150mm Isover 'APR 1200' acoustic roll insulation (glassmineral wool) tightly packed + joints staggered over entire floor (not shown for clarity)

new timber joists - 200x50mm

60mm Gyproc Thermaline Super

new timber joists - 200x50mm

-12.5mm foil-backed plasterboard -18mm WBP ply -70mm Celotex GA3070 foil-faced rigid insulation boards -25mm gap -tanking membrane -reinforced concrete wall to engineer's details/spec

EXISTING LEVEL

h: 2300

-engineered european oak 20mm floorboards -18mm WBP plywood subfloor -100mm sand/cement screed (allow 12mm celotex insulation to perimeter) -tanking membrane -GA3100 rigid-board insulation by Celotex -reinforced concrete strips to engineer's details/spec

h: 2420

new timber joists - 225x50mm

-30x60cm porcelain tiles -100mm sand/cement screed -Celotex GA3100 rigid-board insulation -tanking membrane -reinforced concrete strips to engineer's details/spec

-engineered european oak 20mm floorboards -18mm WBP plywood subfloor -100mm sand/cement screed (allow 12mm celotex insulation to perimeter) -GA3100 rigid-board insulation by Celotex -tanking membrane -reinforced concrete strips to engineer's details/spec

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

joist 200x70mm

joist 200x70mm

EXISTING LEVEL -12.5mm foil-backed plasterboard -18mm WBP ply -70mm Celotex GA3070 foil-faced rigid insulation boards -25mm gap -tanking membrane

existing manhole

Sump pump for tanking

ESTIMATED WATER LEVEL

Date: 19 - 11 - 10

Dwg no. 44BS-X01

Proposed Section

44 Bradbourne Street - London om

1:50 @ A3


no. 46

no. 44 Bradbourne Street

no. 42

Date: 05 - 10 - 10 Proposed Rear Elevation 1:50

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

Dwg no. 44BS-SB 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

Dow Corning 895 silicone structural glazing sealant

Dow Corning 897 silicone building sealant

triple laminated heat strengthened glass 33mm (10/10/10) (supporting frame laid to fall towards garden)

22mm hardwood timber decking (IPE or similar) existing garden level

12mm Neoperene rubber strip (65 shore)

150

2no. 40x40mm stainless steel angles

2 layers of EPDM waterproof membranes (Resitrix or similar) 1 layer to cap the concrete wall 1 layer to protect the steel angle

nylon spacer + silicone seal

6mm mirror on 4mm adhesive

12.5mm plasterboard

90x200 PFC

600

150

top of concrete wall

granular fill filter fabric wrapped around sub-soil drain

150x90 unequal steel angle (glavanised) fixed to concrete wall through a 6mm neoprene mat

RIW top edging strip RIW double drain

arden level

70mm rigid board insulation (foil-faced)

tanking cavity membrane (Newton or Delta)

RIW double drain RIW adhesive tape

perforated sub-soil drain

or land drain

Date: 19 - 11 - 10 Glass Deck - Details

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

18mm WPB ply

Dwg no. 44BS-D01 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

2.65mm lead coping (BS Code 6)

18mm WPB ply

'Bithuthene 2000' strip (high density polyethylene film + self-adhesive rubber/bitumen compound)

2.65mm lead flashing chased into brickwall (BS Code 6)

-'Bithuthene 2000' strip -stainless steel flashing grade 304 (custom profile) -flexible adhesive by Sika (exact spec t.b.c) -Sika-1 waterproofing system -reinforced concrete wall

22mm hardwood timber decking (IPE or similar)

stainless steel flashing grade 304 (custom profile)

1m - extent of Sika render

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

EPDM waterproof membrane (Resitrix or similar)

nylon spacer + silicone seal

fill with insulation

6mm flat steel plate

50x50x6 equal angle fill cavity with insulation regulalrly spaced perforations (10mm dia.)

90x200 PFC

45mm rigid board insulation

12.5mm foil-backed plasterboard 18mm WPB ply 70mm rigid board insulation (foil-faced) tanking cavity membrane (Newton or Delta) Sika-1 waterproofing system Date: 19 - 11 - 10 Glass Deck Details

Dwg no. 44BS-D02 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

22mm hardwood timber decking (IPE or similar)

15mm toughened glass balustrade

Dow Corning 897 silicone building sealant

existing garden level

2 layers of EPDM waterproof membranes (Resitrix or similar) 1 layer to cap the concrete wall

min. support depth for glass balustrade

150

70

Dow Corning 895 silicone structural glazing sealant

12mm Neoperene rubber strip (65 shore) as setting block aluminium cover plate/fascia

top of concrete wall

6mm steel flat plate

600

150

steel spacer welded to flat plate and angle

granular fill filter fabric wrapped around sub-soil drain

RIW top edging strip 200x150 unequal steel angle (glavanised) fixed to concrete wall through a 6mm neoprene mat

RIW double drain

6mm mirror on 4mm adhesive new garden level 18mm WPB ply

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

tanking cavity membrane (Newton or Delta)

RIW double drain RIW adhesive tape

perforated sub-soil drain

nch depth for land drain

Date: 19 - 11 - 10 Glass Deck Details

Dwg no. 44BS-D03 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

EPDM waterproof membrane (Resitrix or similar) continuous layer under the sliding door and under the glass

triple laminated heat strengthened glass 33mm (10/10/10) (supporting frame laid to fall towards garden)

schluter schiene edge strip

finished tiled floor -adhesive -underfloor heating (electric mat) -dittra matting 18mm PB ply

Dow Corning 897 silicone building sealant Dow Corning 895 silicone structural glazing sealant

12mm Neoperene rubber strip (65 shore)

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

150x90 unequal steel angle fixed to PFC's to form supporting frame for glass 6mm mirror on 4mm adhesive

12.5mm plasterboard

Date: 19 - 11 - 10 Glass Deck Details

Dwg no. 44BS-D04 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

-adhesive -underfloor heating (electric mat) -dittra matting

EPDM waterproof membrane (Resitrix or similar) continuous layer under the sliding door and under the glass

18mm PB ply

Dow Corning 897 silicone building sealant

Dow Corning 895 silicone structural glazing sealant

12mm Neoperene rubber strip (65 shore)

150x90 unequal steel angle fixed to PFC's to form supporting frame for glass 6mm mirror on 4mm adhesive

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

finished tiled floor

schluter schiene edge strip

12.5mm plasterboard

triple laminated heat strengthened glass 33mm (10/10/10) (supporting frame laid to fall towards garden)

Date: 19 - 11 - 10 Glass Deck Details

Dwg no. 44BS-D05 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

silicone seal

folded aluminium flashing piece

Normount V2000 mounting tape

135 degrees steel angle (65x65x8mm) bolted onto brick facade

double glazed panes 8mm toughened/20mm Argon filled cavity/8mm laminated installed at 45 deg.

8mm neoperene rubber strip (65 shore)

Normount V2000 mounting tape

Dow Corning 897 silicone building sealant

map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

8mm neoperene rubber strip (65 shore) 70x50x6mm steel unequal angle

folded aluminium cover piece

triangular steel plates welded to steel angles

folded aluminium cover piece fill cavity with insulation

200x200x16mm steel equal angle

PU foam

silicone seal

Date: 19 - 11 - 10 Glass Canopy Details

Dwg no. 44BS-D06 44 Bradbourne Street - London


Notes: This drawing is copyright of map projects limited Š - This drawing is for information purposes only - Do not scale from this drawing - All dimensions to be confirmed on site and any discrepancies to be reported to the architect

Normount V2000 mounting tape double glazed panes 8mm toughened/20mm Argon filled cavity/8mm laminated installed at 45 deg. 129 degrees steel angle (65x65x8mm) bolted onto brick facade

8mm neoperene rubber strip (65 shore)

Normount V2000 mounting tape

Dow Corning 897 silicone building sealant

8mm neoperene rubber strip (65 shore) 70x50x6mm steel unequal angle

2.65mm lead coping (BS Code 6)

folded aluminium cover piece 18mm WPB ply map projects limited - 60 Southwark Bridge Road - London - SE1 0AS - t: +44 (0) 20 7633 99 55 - e: info@mapprojects.com

triangular steel plates welded to steel angles EPDM waterproof membrane (Resitrix or similar)

folded aluminium cover piece

fill cavity with insulation

silicone seal

existing garden brick wall raised by one additional course (75mm)

2no. 200x150x15mm steel unequal angles bolted together as shown and fixed onto the garden wall

Date: 19 - 11 - 10 Glass Canopy Details

Dwg no. 44BS-D07 44 Bradbourne Street - London

44bs tender  

Tender documentation for 44 Bradbourne Street, Parsons Green, London

Read more
Read more
Similar to
Popular now
Just for you