Issuu on Google+

O F

H E R E F O R D

C ATA LO GUE I SSUE I


Introduction

 

Page: 1

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Introduction

 

Level Peaks Associates were established only 5 years ago. The company had one simple goal when it was originally conceived and that was to deliver the most advanced and cutting edge equipment and clothing from anywhere in the world to enhance the fighting soldier’s capability, all from a single company. Level Peaks Associates has achieved this time and again, successfully delivering everything from the EMAG for the SA80, the latest MTP camouflage pattern, adopted by the UK MOD, all the way to a pair of the best combat trousers money can buy. Through hard work and an unquenchable thirst to provide the best, Level Peaks Associates have proudly taken up a position amongst the World’s leading military kit and equipment suppliers.

When solutions simply aren’t available then Level Peaks Associates will go the extra mile and develop the system, be it consultancy, comms, camouflage or clothing to ensure the solution is found and delivered in good time. Based in Hereford, and staffed mainly by ex-Special Forces personnel, Level Peaks Associates boasts an impressive military heritage, and a wealth of operational and counter terrorist experience. The company also has a strong background in government finance, government procurement, delivering successful programs to SF users and designing new capabilities. Level Peaks Associates is a young, dynamic and unique company in its depth and breadth of knowledge and experience. It is

a company with a fresh outlook, with energy and innovation, and with an unmatched determination to succeed. There is no other company in the UK like it. Level Peaks Associates are committed to sourcing, designing and delivering the best solutions to the operator. The company continues to grow in a range of arenas: Clothing, Cyber, Surveillance & Target Acquisition, Weapons and high-end Consultancy. A exciting Level Peaks clothing range will be launched soon - watch this space!

Level Peaks Associates - Not For The Ordinary

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 2


Introduction

 

Level Peaks Associates have the ability to deliver many products, from a vast array of companies. This catalogue contains only a fraction of the products available - if you don’t see an item here, please do not hesitate to contact us and we will be happy to help with your enquiry. If everyone else has said it can’t be done, contact us and we are sure you’ll be pleasantly surprised. Our sales team have a vast knowledge of the products we sell and if they don’t know then they will find out and get back to you. Level Peaks Associates also have an online shop, which may well have the item you are looking for. Online Purchases – if in stock it will be dispatched within 48hrs. Find us on Facebook, Twitter and Youtube to keep up to date with developments in product lines and clothing, competitions with fantastic prizes and information at your convenience. Individual Sales: sales@levelpeaks.com Contract Sales: r.murray@levelpeaks.com Marketing: social@levelpeaks.com General: info@levelpeaks.com Website: www.levelpeaks.com Address: The Warehouse,

Page: 3

Gwynne St,

Hereford, HR4 9DL

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Introduction

 

INTRODUCTION______________ 1 LEVEL PEAKS ASSOCIATES_______ 5 5.11 TACTICAL_________________ 7 BOKER______________________ 51 CAMELBACK_________________ 55 CRYE PRECISION_____________ 67 MAGPUL____________________ 99 MAMMUT___________________119 OAKLEY____________________ 125 OPS CORE__________________ 151 WILCOX____________________ 163 WILD THINGS TACTICAL______ 177 PRODUCT INDEX____________ 185

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 4


Level Peaks Associates

Technical Windproof Combat Smock LPA-TECHSM

• Lightweight, low bulk & extremely comfortable • Customized design for combat by one of the Worlds leading Special Forces Units • Nyco Ripstop 50% Nylon / 50% Cotton, Ripstop Poplin weave • 2 Velcro IRR arm patches supplied • Multi panel adjustable peaked hood • Pull cord and toggle • Pull cord adjustable collar (hidden) • Arm pockets (both sides) • Velcro arm patch (both sides) • Elbow pad pockets • Under arm vents • Adjustable cuffs • Chest Pockets and front pockets • Additional ‘Slack Time’ Hand Pockets • Each pocket contains inbuilt organisers • ‘Fishtail’ style length • Wide storm flap front panel • Front access zip double lined stitching • Compass pocket • Map & document pockets

Level Peaks have developed one of the world’s most advanced battle smocks. Bulk orders will enable Level Peaks to tailor the smocks to your requirements. Each batch of smocks can be custom tailored for your specific requirements. Designed for use in combat, the Technical Smock is designed and tested by personnel who have experience of using standard issue clothing, in theatre, have an intimate understanding of its flaws and have personally modified and upgraded garments. This product is borne of necessity and contains many obvious features that are seriously lacking in other available combat smocks. Colour: MULTICAM

Page: 5

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Level Peaks Associates

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 6


5.11 Tactical

Page: 7

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Special Make-Ups (SMU)

5.11 Tactical introduces a unique service program for your professional needs in uniforms, apparel, footwear, packs, bags, pouches and accessories. Special Make-Ups (SMU) can be designed and crafted precisely to your organisation’s specifications.

Taclite Boots

5.11 Tactical has done it again with the new Taclite boots, lighter more breathable and built for athletic performance. The sister product of the taclite trainers, built for performance: at the range, on the trail or wherever your life’s pursuits take you.

Multicam Products

5.11 is proud to introduce MultiCam products to the law enforcement and first responder market. 5.11 Tactical introduced additional products to their TDU range (Tactical Duty Uniform), outerwear category, packs and bags alongside the already successful Rapid Assault Series. With this expanded assortment of branded MultiCam, 5.11 have one of the largest and most comprehensive assortments of Multicam products on the market today.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 8


5.11 Tactical

Taclite™ Pro Pants LPA-5S-74273 • • • • • • • • • •

Lightweight 65/35 poly cotton ripstop Magazine/mobile phone pocket Two cargo pockets Patented slash rear pockets Treated with HT Teflon® wear resistant finish External knife pocket Rear web strap YKK® zippers Prym® snaps Clip loop

Fashioned after our traditional 5.11 Tactical® pant, the new 5.11 Taclite™® Pro Pant features a lightweight poly-cotton ripstop fabric and a fully gusseted crotch that allows a full range of movement. These pants have pockets located for easy access to all your gear. An external knife pocket on the right front side gives you easy access to a 5.11® Knife. Two cargo pockets are located on both thighs and a magazine/ mobile phone pocket is located over the left cargo pocket. Sizes: 28 – 44 Length: 30-36 Page: 9

Taclite™ Pro Shorts LPA-5S-73287 - 9.5” inseam LPA-5S-73308 - 11” inseam • • • • • • • • • • • • • •

Tough, lightweight, breathable 6.14-oz., 65/35 ripstop Fade and wrinkle-resistant Teflon treated for stain, liquid and soil resistance Patented rear strap and slash pockets Action waist Gusseted crotch for enhanced movement Double-reinforced seat Double and triple-needle stitching Bartacks in high-stress areas Quick-access multipurpose pocket Genuine YKK® zippers, Prym® snaps 9-1/2” inseam Imported

Sizes: 28 – 44 Colours: Black 019, TDU Khaki 162, Dark Navy 724

Taclite™ TDU™ Pants LPA-5S-74280

• 65% polyester 35% cotton ripstop • Teflon treated for stain resistance • Cargo pockets with built-in Back-up Belt System can carry additional AR magazines or other gear • Self-adjusting comfort-waist has no irritating metal buckles • Triple-stitching and 40-plus bartacks in highstress areas • Imported

The 5.11 Tactical Duty Uniform Ripstop Pant is the new standard and replacement of the old style BDU. Designed with today’s law enforcement or security force in mind, this pant has all the features officers want and need. Over a year of product development went into the design of this pant using input from police officers, special operations operators, and military personnel. The result is a new industry standard in BDU style pants. Size: XS – 4XL, Short/Reg/Long Colour: Black 019, Dark Navy 724, TDU Green 190

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Covert Cargo Pant

TDU™ Pants

LPA-5S-74290

LPA-5S-74003 MENS RIPSTOP LPA-5S-74004 MENS TWILL LPA-5S-64359 WOMENS RIPSTOP • • • • • • • • • • •

Superior fit Self-adjusting waist Removable neoprene kneepads Genuine YKK® zippers and Prym® snaps Teflon® treated Stain, liquid and dirt resistance 65% polyester/35% cotton Ripstop Short, medium and long lengths Blousing straps Large side outer pockets Back-up Belt System™

Size: XS – 4XL, Short/Reg/Long Colour: Black 019, TDU Khaki 162, TDU Green 190, Dark Navy 724

• Large covert cargo pockets on both legs each carry 2 magazines. • Casual looking deep rear pockets. • Dual front deep pockets. • One traditional and a second zippered pocket fitting two pistol mags per pocket. • Double and triple-stitch construction. • Bartacks in high stress areas. • Self-adjusting comfort waistband. • Cordura® nylon lining in selected zones • Genuine YKK® zippers and Prym® snaps. • Tough 8.5-oz. peached cotton canvas • Available in 4 colours

Made of tough, 8.5-oz. 100% cotton peached and washed canvas that becomes increasingly more comfortable over time, the 5.11 Covert Cargo Pants stands up to the rigors of daily work, play and travel. Covert Cargos look like a regular pair of casual pants. Sizes: 28 - 44 Colours – Khaki, Coyote, OD Green, Tundra

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 10


5.11 Tactical

TDU Shirt

Rapid Assault Shirt

LPA-5S-72002 Ripstop LS LPA-5S-71002 Twill TDU S/L LPA-5S-72003 Twill TDU L/S • • • • • • • • • • •

LPA-5S-72194

Comfortable, durable and functional Superior fit Bi-swing shoulder for a wider range of motion Teflon® treated for stain and soil resistance Neoprene elbow pads Triple-stitch construction 26 bartacks in high stress areas Tough melamine buttons Double-reinforced elbows Patented hidden document pockets 65% polyester/35% cotton ripstop

A new industry standard in BDU style shirts. Made of tough, polyester/cotton Ripstop, the 5.11 TDU® Ripstop Shirt stands up to the rigors of patrol and special operations. Known for superior comfort, functionality and fit, the shirt features a bi-swing shoulder for a wider range of motion. Sizes: XS – 4XL Colours: Black 019, Dark Navy 724, TDU Green 190 Page: 11

• • • • • • •

Body 55% cotton/37% polyester/8% spandex Sleeves & collar 65% cotton/35% poly ripstop Mesh- 55% cotton/41% polyester/4% spandex Mesh panels for breathability Stretch knit body for comfort under armor 1/2 zip front with collar Imported

Lightweight body fabric of poly/cotton/ spandex knit that wicks perspiration and dries quickly. 5.11 have engineered side mesh panels to improve air flow, keeping you cool. With premium stretch the torso is form fitting without being tight or restrictive. They’ve utilized flat lock seams to reduce chafing and maximize comfort for wear under body armor. The saddle shoulder construction allows for maximum range of motion for all operations. The sleeves are constructed of a tough poly/cotton ripstop with articulated, reinforced elbows. Large, dual shoulder pockets provide additional storage capacity.

Uniform Hat LPA-5S-89260 • • • • •

Fade resistant Poly-Cotton Twill Adjustable Teflon® finish Accepts embroidery and silk screening well

Adjustable uniform hats are made from fade resistant poly-cotton. 5.11 have treated it with Teflon® for soil, stain and liquid protection so it stays looking neat clean and professional all the time. Size: One Size Colour: Dark Navy 724, Black 019, TDU Green 190

Sizes: S – 3XL Colour: Black 019, TDU Green 190

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Best Selling T-Shirt

Professional T’s LPA-5S-71309 • • • • • • • • • • • • •

LPA-5S-40016

Durable, comfortable and functional 6-oz. ring-spun knit Moisture wicking performance Wrinkle resistant Fade resistant Pen pocket on left sleeve Extra long to stay tucked in all day One inch, no roll, high density collar Double needle tailoring at the shoulder for strength and durability Tapered fit to stay tucked in all day Printed label to prevent chafing Spandex ribbed crew neck Accepts embroidery and silk screening well

Sizes: XS – 3XL Colours – Fire navy 720

• • • • • • • • • • • •

Durable, comfortable and functional Comes in packs of three 100% cotton Extra long One inch, no roll, high density collar Double needle tailoring 4.5 ounce ring spun cotton Moisture wicking technology Tapered fit Printed label Available in V-neck and crew neck 3 colors

Sizes: Small - 3XL Colours – Navy Tan White Black

Holster Shirt LPA-5S-40011 • • • • • • • • • • •

Designed for concealed carry or work out Securely stows compact handgun Magazines/speed loaders or mp3 player Opaque outer mesh obscures handgun Mesh shoulder yoke supports 80% polyester, 20% spandex Moisture wicking technology Flack-lock seams reduce friction and chafing Velcro pocket locks to keep gear secure Antimicrobial material Black and white

Sizes: Small - 3XL Colours – White 010, Black 019

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 12


5.11 Tactical

Winter Leggings LPA-5S-40078 • • • • • • •

7.3oz-61% N23% P16% Spandex Anti-microbial Moisture wicking Low profile warmth retention Mesh insets at crotch for breathability Engineered tight fit lower leg Reduces pressure points in boots

The 5.11 winter legging was designed by end users and is sure to impress you the moment you put it on. Designed to be worn under your uniform or other gear it will keep you warm and comfortable. With its built in anti-microbial and moisture wicking technology to also keep you dry at the same time. Designed with the latest fabrics using a 7.3 oz, 61% nylon, 23% polyester and 16% spandex combination with an engineered lower leg to reduce pressure points in your boots while staying in place.

Loose Fit Undergear LPA-5S-40007 • • • • • • • •

100% polyester Moisture wicking technology Anti-microbial to reduce body odor Quick-drying Underarm mesh panel Flat-lock seams to prevent chafing Printed label to prevent chafing 6 colors and one digital camo pattern

Sizes: S-2XL Colours: White 010, Black 019

Sports Brief LPA-5S-40004 • • • •

95% polyester / 5% elasthan 3D moisture wicking technology Cut for an athletic fit 1-1/2” quality elastic waistband

Durable, comfortable, stretchable, breathable, and quick drying Sizes: S 2XL Colours: Black 019 and White 010

Sizes: S -3XL Colours: Black 019

Page: 13

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Tight Crew Short Sleeve Shirt LPA-5S-40005

•Durable, comfortable and functional •80% polyester, 20% spandex •Mild athletic compression fit •Moisture wicking technology •Anti-microbial •Quick-drying •Underarm mesh panel •Flat-lock seams •Printed label Sizes: S-2XL Colours: White 010, Black 019

Muscle Mapping Shirt LPA-5S-40001 • • • • • • • • • •

Durable, comfortable and functional 88% Tactel® nylon, 7% nylon, 5% spandex Three distinct zones of compression Moisture wicking technology Anti-microbial to reduce body odor Quick-drying Saddle shoulder construction Underarm mesh panel Flat-lock seams to prevent chafing Printed Label to prevent chafing

Sizes: Small - 2XL Colours – White 010, Black 019

Patrol Short LPA-5S-43057 • • • • • • • • • •

Lightweight 96% nylon/4% spandex fabric 9” inseam Fade and wrinkle resistant Breathable and quick drying performance Non-slip waistband Running crotch gusset Zip closure rear pockets for security Roomy cargo pockets with internal pocket Hook and loop adjustable belt-keeper loops Action waist for fit and comfort

Sizes: S-2XL Colours: White 010, Black 019

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 14


5.11 Tactical

Covert Dress Shirt LPA-5S-72188 • • • • • • • •

60% cotton/40% polyester fabric Moisture wicking CovertMesh™ interior lining Genuine Prym® snaps Internal concealment chest pockets RAPIDraw™ center placket Long cut with curved hem Hidden Button Down Collar

Covert Casual Shirt LPA-5S-71180 • • • •

55% cotton / 45% polyester fabric Concealment pockets RAPIDraw™ snap front Breakaway sides for fast access

Sizes: Medium - 3XL Colours – Black 019, Sand 038, Cadet Blue 038, Blue Plaid 710, Olive Plaid 848

Sizes: Medium - 3XL Colours –Light Blue Oxford 700, Blue Plaid 710, White 010

Page: 15

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Trainer Belt

Operator Belt

LPA-5S-59409 • • • • •

LPA-5S-59405

Durable, comfortable and functional Solid stainless steel buckle Buckle finished in black matte Super strong 1.5” nylon mesh material Reinforced stitching

Sizes: Small - 3XL Colours: Coyote Brown 120, Black 019, TDU Green 190

• • • • •

Durable, comfortable and functional Solid stainless steel buckle Buckle finished in black matte Super strong 1.75” nylon mesh material Reinforced stitching

Sizes: Small - 3XL Colours: Coyote Brown 120, Black 019, TDU Green 190

Double Duty TDU Belt SKU :59567 - 1.75” SKU :59568 - 1.5”

TDU Belt LPA-5S-59568

• Non-metallic, low profile plastic buckle • Heavy duty nylon webbing

Super-strong nylon webbing, triple stitched to maintain a great shape and keep the buckle securely in place. The low profile, non-metallic buckle is extremely durable and won’ t set off metal detectors at airports. Sizes: Small - 3XL Colours: Coyote Brown 120, TDU Green 190

• Reversible design gives you 2 colour options • Non-metallic buckle - great for air travel and safe for EOD • 5 rows of stitching for stability • Easy thread belt tip

Introducing 5.11’s reversible 1.5” nylon belt. Two layers of heavy-duty nylon webbing. Sizes: Small - 3XL Colours: Coyote Brown 120 TDU Green 190 Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 16


5.11 Tactical

Short Sleeve Polo LPA-5S-71049 • • • • • •

100% no snag polyester fabric Tough melamine buttons Flexible collar stays Mic clips Dual pen pockets on left sleeve Gusseted sleeves

The Performance Polo Shirt is a new concept in neat, clean and professional. Made of 100% polyester, this performance polo shirt has a slight sheen and stays looking good day in and day out. All the features of the 5.11 cotton Tactical Polo including mic clips, fully gusseted sleeves and pen pockets on the left sleeve. The Performance Polo shirt fabric is moisture wicking to constantly wick moisture away from your body. The fabric dries fast to keep you comfortable and the shirt is antimicrobial which prevents the growth of odour causing bacteria. Sizes: XS – 3XL Colours: White 010, Black 019, Silver Tan 160, Traffic Yellow 325, Range Red 477, Dark Navy 724, LE Green 860, Charcoal 018, TDU Green 190 Page: 17

Professional Polo LPA-5S-41060 • • • • • • • •

100% Treated Cotton Resistant to fading, wrinkling, and shrinking Tough melamine buttons No roll collar with flexible collar stays Accepts embroidery and silk screening well Short sleeve Assorted colors Tall adds 2 inches to body length

Made to meet the demands of law enforcement organisations, the 5.11 Professional Polo Shirts will stay looking neat, clean and professional on any job. The Professional Polo Shirts have been selected for casual uniform wear throughout the USA. Made of 100% cotton, specially treated not to fade, wrinkle or shrink, this professional polo shirts provide a neat, clean and professional look.

Taclite™ Pro Short Sleeve LPA-5S-71175 • • • • • • • •

Durable, ultra-lightweight, breathable 4-oz., 65% polyester/35% cotton ripstop Stain, liquid and soil resistant 5.11s patented hidden document pockets Pen pockets on left sleeve Hidden button-down collar stays Moisture-wicking Drilex® Short or long sleeved available

Sizes: S – 3XL Colours: Black 019, TDU Green 190, TDU Khaki 162, Dark Navy 724, Charcoal 018

Sizes: XS – 3XL Colours: White 010, Black 019, Silver Tan 160, Dark Navy 724, LE Green 860, Charcoal 018, Heather Grey 016, Academy Blue 692, Dark Navy 724, LE Green 860, Charcoal 018, TDU Green 190

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Taclite™ Pro Long Sleeve Shirt LPA-5S-72175 • • • • • •

Durable, ultra-lightweight 4-oz., 65% polyester/35% cotton ripstop Stain, liquid and soil resistant 5.11s patented hidden document pockets Pen pockets on left sleeve Double-reinforced elbows

The Taclite™ Pro Long Sleeve Shirt is the perfect complement to the 5.11 Taclite™ Pro Pants. The 5.11 Taclite™ Pro Long Sleeve Shirt is a comfortable, durable and functional choice for law enforcement, military and fire professionals. Ideal for both on and off-duty wear, the innovative 5.11 Taclite™ Pro Long Sleeve Shirts have 5.11’s exceptional fit, patented hidden document pockets and unmatched heat management system. Sizes: S – 3XL Colours: Black 019, TDU Green 190, TDU Khaki 162, Dark Navy 724, Charcoal 018, Coyote Brown 120, Tundra 192

Tactical Shirt LPA-5S-72157 • • • • • • • • • • •

Comfortable, durable and functional Triple-stitch construction 26 bartacks in high stress areas Tough melamine buttons Patented hidden document pockets Reinforced pen pockets Cape-back with moisture-wicking mesh Hidden button down collar 6 pockets; 9 colors Tough 5.4-oz. cotton canvas Long sleeves

Tactical Shirts is the comfortable, durable and functional choice of law enforcement, military and fire professionals. Ideal for both on and off-duty wear, the innovative 5.11 Tactical Shirts are the only tactical shirts in the world with 5.11’s exceptional fit, patented hidden document pockets and unmatched heat management system. Sizes: XS – 3XL Colours: Black 019, Khaki 055, OD Green 182, Fire Navy 720, Coyote 120, Tundra 192 Length: Regular or Tall (Tall adds 2 inches)

1/4 Zip Job Shirt LPA-5S-72314 • • • • • • •

11.6 ounce poly cotton fleece Poly-cotton twill 5.11s stain resistant finish No-roll collar Locker loop YKK® zipper Chest Breakthrough™ pocket with Velcro® divider • Hand warmer pockets on both sides • Mic pockets at both shoulders • Pen pockets on left sleeve

The 5.11 ¼ Zip Job Shirt is made of 11.6 ounce poly-cotton fleece fabric with stain resistant treatment. Resists stains from soils, food and liquids and will stay looking neat clean and professional for an extended shift. The no-roll collar stays put and the locker loop lets you hang the shirt easily. The zippered opening features a quality YKK® zipper. Sizes: XS – 3XL Colours: Black 019, Fire Navy 720, Heather Grey 016 Length: Regular or Tall (Tall adds 2”)

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 18


5.11 Tactical

Chameleon Soft Shell Sabre Jacket LPA-5S-48099 • • • • • • •

LPA-5S-48036

100% polyester bonded softshell, Total weight 230 grms Wind and water repellent Covert outdoor design Brushed lining Pullout panels at front chest and back 2 exterior pockets, 3 internal pockets

5.11 introduces it’s new softshell wind and water resistant Chameleon jacket. Both wind and water repellent and featuring a light weight mesh liner and drop tail, this jacket is perfect for any undercover, off duty assignment or just for wearing any day or night of the week. With its three 5.11 pullout ID panels you can remain undercover or covert until the time comes when you really need to let people know who you are. Sizes: XS – 3XL Colours: Black 019, Dark Navy 724, Moss 191 Page: 19

• • • • • • • •

Water Proof & Wind Proof Breathable Waterproof zippers & welded seams Three layer micro fibre Fleece hand warmer front pockets Internal chest pockets Zippered exterior hand-warmer pockets Front and back removable ID panels

The three layer micro fibre outer material is lightweight, durable, windproof, waterproof, soft, and durable. The soft-shell micro fibre is bonded to tight knit fleece to increase comfort (warmth) then lined for added durability. The overall weight of the Sabre Jacket is perfect for all season use. Six external pockets make it easy to stow all of your gear. Two internal pockets give quick access to a concealed firearm. The two front hand pockets are lined with fleece to keep your hands warm and dry.

Tac Dry Rain Shell LPA-5S-48098 • • • • • • •

100% Nylon Waterproof breathable seam sealed Removable hood rolls into collar Removable pull-out ID panels 5 pockets Storm flap QUIXIPTM – Quick access side seam zips

Designed to be worn on or off duty, in undercover or covert carry situations the 5.11 Tac Dry™ Rainshell is fully waterproof, seamsealed and breathable. With it’s lightweight outer shell and longer cut for use over a holstered side arm this new jacket is sure to be a huge hit. Sizes: XS – 3XL Colours: Dark Navy 724, Black 019, Charcoal/Black 018

Sizes: XS – 4XL Colours: Moss 191, Black 019, Coyote Brown 120

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Response Jacket

5 in 1 Jacket

LPA-5S-48016 • • • • • •

LPA-5S-48017

Wind resistant Hidden chest document pockets Microfiber Lightweight Zippered hand pockets Hidden ID panels

The 5.11 Response Jacket has been serving the needs of off duty personnel by being ready when you are. This Response Jacket features hidden chest document pockets for access to critical gear along with hidden ID panels on the chest and back. The ID panel can be screened with your department’s information or you can purchase pre-printed panels with SHERIFF and POLICE. Made with a lightweight and windproof microfibre, this Response Jacket stows easily in any gear bag and comes out of the bag looking great. Sizes: XS – 4XL Colours: Black 019, Dark Navy 724

• • • • • • • • • • • • • • •

High performance Waterproof/breathable outer liner Hidden chest document pockets YKK zippers Elastic waist Removable ID panels on chest and back Removable ID panel on back Elastic/velcro wrist bands Fleeced inner jacket Removable sleeves on inner fleece jacket Detachable hood Side zippers for ventilation Back-Up Belt System™ compatible Mic clips Insulated

This 5-in-1 Jacket offers tremendous value for such feature-packed outerwear. Designed with patrol in mind, this jacket not only keeps you warm, but also provides you with all the safety and performance you need.

3 in 1 Parka LPA-5S-48001 • • • • • •

Wind resistant Hidden chest document pockets Microfiber Lightweight Zippered hand pockets Hidden ID panels

The 5.11 Response Jacket has been serving the needs of off duty personnel by being ready when you are. This Response Jacket features hidden chest document pockets for access to critical gear along with hidden ID panels on the chest and back. The ID panel can be screened with your department’s information or you can purchase pre-printed panels with SHERIFF and POLICE. Made with a lightweight and windproof microfibre, this Response Jacket stows easily in any gear bag and comes out of the bag looking great. Sizes: XS – 4XL Colours: Black 019, Dark Navy 724

Sizes: XS – 4XL Colours: Black 019, Dark Navy 724, Forest Green 878, Dark Brown 112 Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 20


5.11 Tactical

Patrol Rain Pant LPA-5S-48057 • • • • • • • •

High performance waterproof/breathable Durable, comfortable and functional Twelve inch side zippers Gusseted crotch Pass-through pockets Abrasion resistant kick panels Lower leg Velcro® closures Elastic waist

If you find yourself in wet weather 5.11 Tactical series has the right combination of waterproof and breathable gear for you. The perfect partner for the 3-in-1 or 5-in-1 jackets, the Patrol Rain Pants will keep you warm and dry in extreme wet conditions. Made from our high performance waterproof/breathable material, these rain pants are easy to slip on and off. Sizes: XS – 3XL Colours: Black 019, Black Navy 724 Leg Length: Regular or Long

Covert Fleece Jacket LPA-5S-48111 • • • • • • •

100% Polyester Fleece Wind resistant fleece Hidden chest pockets with BBS Elasticized cuff and hem Zipper handwarmer pockets Inside storage pocket Can zip into 3 in 1 jacket

Incorporating 5.11’s patented document pockets with its BBS system, this fleece jackets gives you the ability to carry documents of any of 5.11’s BBS compatible products. With its elasticized cuff and hem along with large hand warmer pockets this jacket will keep you warm when the weather starts to turn cool. This fleece is designed to zip into the 3 in 1 jacket. Sizes: XS – 4XL Colours: Black 019, Moss 191

Page: 21

Lined Packable Jacket LPA-5S-48052 • • • • • •

Wind resistant Fleece Lining Hidden chest pocket Mic loops Lightweight Packable

Incorporating 5.11’s patented document pockets with its BBS system, this fleece jacket gives you the ability to carry documents of any of 5.11’s BBS compatible products. With its elasticized cuff and hem along with large hand warmer pockets this jacket will keep you warm when the weather starts to turn cool. This fleece is designed to zip into the 3 in 1 jacket. Sizes: XS – 4XL Colours: Black 019, Moss 191

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Aggressor Parka LPA-5S-48032 • • • • • • • •

Waterproof and breathable parka shell Removable, color-matched fleece liner Back-Up Belt System™ compatible YKK zippers Hidden document pockets Side zippers for access to belt and ventilation Full waterproof hood Velcro sleeve closures

The 5.11 Aggressor Parka is three jackets in one and will serve you well in many different climates. Modeled after our 3-in-1 Patrol Jacket, the Aggressor Parka is a functional piece of outerwear for off duty or undercover work. The outer shell is completely waterproof and breathable and can be worn separately in cool weather. A full featured waterproof and breathable hood is concealed in the collar of the outer shell for those extreme cold conditions requiring full coverage.

Watch Cap LPA-5S-89250 • • • • •

Polyester fleece Wind resistant Water resistant Three colors Perfect for the outdoors

Sometimes it’s the simple things that keep you comfortable. This fleece watch cap is just that. A simple design for keeping your head warm, the Watch Cap comes in three colours and sizes from small through XL. The polyester won’ t absorb water and stays warm even when it gets wet. Sizes: Small – Medium, or Large – X Large Colours: Black 019, Dark Navy 724, Coyote Brown 120, OD Green 182

Sizes: XS – 4XL Colours: Coyote Brown 120, Tundra 192, Dark Grey 028 Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 22


5.11 Tactical

Level 1 Socks

Summer Socks

LPA-5S-59048 9” LPA-5S-59047 6” • • • • • • • • •

LPA-5S-59224 9” LPA-5S-59289 6”

Durable, comfortable and functional Superior fit Multiple zones of compression Moisture-wicking Coolmax® fibers Extra padding in soles of feet 80% Coolmax® 8% nylon 8% spandex 4% rubber

If you find yourself in wet weather 5.11 Tactical series has the right combination of waterproof and breathable gear for you. The perfect partner for the 3-in-1 or 5-in-1 jackets, the Patrol Rain Pants will keep you warm and dry in extreme wet conditions. Made from our high performance waterproof/breathable material, these rain pants are easy to slip on and off. Size: Large Colours: Black 019, White 010, Coyote Brown 120

Page: 23

• • • •

Durable, comfortable and functional Superior fit Multiple zones of compression Moisture-wicking Coolmax® fibers

Enhanced breathability and lighter weight. Great for hot climates and dress shoe wear.

Shock Mitigation System Insoles LPA-5S-59210

Dual density inserts for cushion and support Anti-Odour active charcoal layer Sizes: Small (sizes 6-8), Medium (sizes 9-11), Large sizes (12+)

Size: Large Colours: Black 019

Shoelaces LPA-5S-59213

Sturdy paracord with moulded end caps. Size: 61” (sizes 6-8) 69” (9-11) 71” (12+) Colours: Black 019, Coyote 120

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Taclite Trainer Mid LPA-5S-12024 • • • • • • • • • • •

Cushioning Lightweight Breathable Waterproof suede Waterproof breathable membrane Combined air mesh and tighter closed mesh Antibacterial and moisture wicking lining Combination ghillies and composite eyelets Stay tied sausage laces Abrasion resistant toe and heel overlays 5.11 Stay flat pull tab

The Tactical Trainer 2.0 is disguised as a light hiker and when worn with jeans or 5.11 Cover Khakis can help you disappear into a crowd or pair it with our Taclite™ Pro pants and train on the range. You can also wear these trainers to the gym or off the clock for a family hike or pick up football game. Size: 4 – 15 Width: Regular or Wide Colours: Anthracite 023, Black 019 Brown 120

Taclite Trainer Low LPA-5S-12023 • • • • • • • • • • •

Cushioning Lightweight Breathable Waterproof suede Waterproof breathable membrane Combined air mesh and tighter closed mesh Antibacterial and moisture wicking lining Combination ghillies and composite eyelets Stay tied sausage laces Abrasion resistant toe and heel overlays 5.11 Stay flat pull tab

The Tactical Trainer 2.0 is disguised as a light hiker and when worn with jeans or 5.11 Cover Khakis can help you disappear into a crowd or pair it with our Taclite™ Pro pants and train on the range. You can also wear these trainers to the gym or off the clock for a family hike or pick up football game. Sizes: 4 – 15 Width: Regular or Wide Colours: Black 019, Dark Coyote 106

Taclite Coyote Boot LPA-5S-12030 6” LPA-5S-12031 8” • • • • • • • • • • • •

Available in 6” or 8” ankle height Lightweight and breathable Adjustable lace to toe construction Coyote tan suede 1200D Cordura Perforated EVA foam in collar and tongue Antibacterial and moisture wicking lining 5.11s Zonal Lacing System Stay tied sausage laces Oil and slip resistant Quiet rubber outsole Fast rope control tread

The 5.11 Taclite™ series of boots are our newest introduction to our growing Taclite™ family of products that build on the features and benefits you’ve come to expect and providing even lighter weight and more breathable performance. Size: 4 – 15 Width: Regular or Wide Colour: Coyote 120

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 24


5.11 Tactical

Taclite Side Zip Boot LPA-5S-12021 6” LPA-5S-12022 8” • • • • • • • • • • • •

Black full grain polishable leather 1200D Cordura Breathable air mesh Perforated EVA foam padding Hidden side pocket YKK ® side zipper Antibacterial and moisture wicking lining 5.11s Zonal Lacing System TPU external ankle stabilizer Oil and slip resistant Quiet rubber outsole Fast rope control tread

The design of the Taclite™ boot is both modern and traditional. 5.11 use the traditional lace to toe construction, but have strategically placed multiple panels of leather, mesh and nylon to speed up the appearance and increase the functionality. Size: Large Colours: Black 019, White 010, Coyote Brown 120

Page: 25

ATAC 8” Side Zip LPA-5S-12021 6” LPA-5S-12022 8” • • • • • • • • • • • • • • •

Polished leather toe Full grain leather and nylon upper Antibacterial and moisture-wicking lining Side zipper for easy on and off Hidden pocket Shock Mitigation System™ Oil and slip resistant, quite outsole Open cell foam cushioning Cushioning insole foam Dual Density Polyou® cushioning Hypertext® lasting board Non metallic shank Injection molded phylon midsole Semi-rigid heel and toe reinforcement Available in wide widths

Designed to be fast, lightweight and responsive the A.T.A.C.® 8” Side Zip Boot incorporates cutting-edge design features, traditional construction processes for proven durability and a great value. Size: 4 – 15 Width: Regular or Wide Colour: Black

ATAC Storm Boot LPA-5S-12004 • • • • • • • • • • • • • • •

Full grain leather and 1200D nylon upper High performance Waterproof breathable membrane Antibacterial and moisture-wicking lining Bloodborne pathogen resistant Side zipper for easy on and off Hidden pocket Shock Mitigation System™ Oil and slip resistant, quite outsole Open cell foam cushioning Cushioning insole foam Dual density Polyou® cushioning Hypertext® lasting board Non metallic shank Injection moulded Phylon midsole

The 5.11 A.T.A.C.® Storm Boot is a great work boot. Built from full-grain leather and 1200D nylon, this A.T.A.C.® Storm Boot is comfortable and durable. Sizes: Regular 4- 15 Wide 7 – 13 Colour: Black 019

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

ATAC Shield CSA/ASTM ATAC 6” Boot LPA-5S-12026 • • • • • • • • • • •

LPA-5S-12018 ATAC 6” Side Zip LPA-5S-12002 ATAC 6”

ASTM F2413-05 M C/75 I/75 EH PR certified CSA Certified Waterproof and polishable full grain leather Waterproof/breathable Bloodborne pathogen resistant membrane* Composite safety toe Puncture resistant midsole board YKK Side zipper Antibacterial and moisture-wicking Shock Mitigation System® Oil & slip-resistant, quiet outsole

Sizes: Regular 4- 15 Wide 7 – 13 Colour: Black 019

• • • • • • •

Polishable full grain leather toe Womens stlye built on a womens last Antibacterial, moisture-wicking lining Shock Mitigation System® Oil & slip-resistant, quiet outsole Comfortable and lightweight Available in Black

The A.T.A.C.® 6” Boot with side zipper is perfect for the officer who prefers an ankle-height boot. The polished leather toe maintains a neat, clean and professional look and meets most organizational requirements for black leather boots. Sizes: Regular 4 – 15, Wide 7 – 13 Colour : Black 019

HRT Urban Boot LPA-5S-11001 • • • • • • • • • • • • • • •

Sympatex® waterproof-breathable membrane Bloodborne pathogen resistant Full grain leather and 1200D nylon upper Antibacterial and moisture-wicking lining Armortex® heel Tactical stcky-rubber toe Shock Mitigation System™ Oil and slip resistant, quite outsole Open cell foam cushioning Cushioning insole foam Dual density Polyou® cushioning Hypertext® lasting board Non metallic Shank Injection molded Phylon midsole Semi-rigid heel and toe reinforcement

The choice for urban tactical duties. The full-grain leather and 1200D nylon upper is comfortable and durable. These urban boots come with a Sympatex® waterproofbreathable membrane and an antibacterial and moisture-wicking lining. Sizes: Regular 4 – 15, Wide 7 – 12 Colour : Black 019

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 26


5.11 Tactical

XPRT Tactical Boot 8” LPA-5S-12201 • • • • • • • • • • • • • • •

5.11s Patent-Pending Kick-Toe Sympatex® waterproof-breathable membrane Cinch system Talon Stabilizer™ 8 contour height Bloodborne pathogen resistant USA full grain leather and 1200D nylon upper Antibacterial and moisture-wicking lining TuffTek abrasion-resistant toe Shock Mitigation System™ Oil and slip resistant, quite outsole Open cell foam cushioning Cushioning insole foam Dual density Polyou® cushioning Hypertext® lasting board

The 5.11 XPRT (Extreme Performance for Rapid Tactics) Tactical Boots are the tactical boots of choice for urban tactical operators. Sizes: Regular 4 – 15, Wide 7 – 12 Colour : Black 019

ATAC Boot : Layers of comfort Page: 27

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Taclite 2 Gloves

Hard Time Glove

LPA-5S-59343 • • • • • • •

LPA-5S-59354

5.11’s best-fitting glove Four-way stretch breathable back panel Tactical Touch™ precision fit fingertips Extremely lightweight and fast drying Seamless hair sheep palm Sweat wipe in back of wristband Breathoprene and Velcro® wrist closure

5.11’s lightest glove meets the demands of patrol, driving, and everyday work. One of 5.11’s combine breathability, comfort, and practical application for police work. The Taclite™2 glove features patented TacticalTouch™ fingertip construction system for maximum dexterity and longer service life. There is no seam at the fingertip to add bulk, wear out, or irritate you. Taclite™2 gloves work well in most dayto-day patrol activities. Their thin, skintight construction enhances your ability to conduct searches, manipulate devices and gear, and access your handgun. Size: S – 2XL Colour: Black

• • • • • • • • •

Kevlar® back panel Articulated TPR-2-piece knuckle protection Tactical Touch™ precision fit fingertips Durable goatskin leather palm, finger facings Finger joint reinforcements Wrist closure and pull tab Neoprene and Velcro® wrist closure Reinforced pull tab Lightweight and fast drying

By partnering with Ironclad Performance Wear®, 5.11 Tactical® gloves set new standards for dexterity, fit, and durability and provide you with gloves you can depend on. Our commitment to functional innovation and unparalleled quality, combined with Ironclad’s dedication to superior fit and tactility, means you can trust our gloves as you navigate through the day’s challenges. Sizes: S – 2XL Colours: Black 019, Coyote 120

Fastac 2 Glove LPA-5S-59338

• Goatskin leather palm, finger facings, fourchettes, cuff, and reinforced pull tab • Heavy-duty heat-resistant cowhide second palm, thumb and saddle pad, and finger reinforcements • Breathoprene and four-way stretch nylon/ Spandex heat-dissipating back panel • Fits over other 5.11 Tactical gloves (Go up one size when wearing as an overglove) • Adjustable wrist-cord with lock

When it’s time to slide down the rope, you need to have as much confidence in your fast-roping gloves as you have in your team and your gear. 5.11’s FASTAC 2 gloves provide enhanced fit and more knuckle protection and we’ve upgraded the leather for more pliability and dexterity. With one layer each of tough goatskin and cowhide leather at all the rope contact points, and a highly breathable Breathoprene® and nylon/Spandex stretch back panel minimized the heat transfer. Sizes: S – 2XL Colours: Black 019

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 28


5.11 Tactical

Praetorian 2 Gloves LPA-5S-59344 • • • • • • •

erfect for everyday cold weather wear P T hinsulate™ C100 insulation throughout Tactical Touch™ precision-fit fingertips U S Patent 7,287,285 Tough but pliable goatskin leather Seamless palm and back Elastic wrist closure

Even when the temperature drops you still need to be able to perform at your best. Our new Praetorian2 winter duty glove is warm and durable but also allows you to do all of the things you do when wearing unlined gloves. Thinsulate™ C100 insulation keeps warmth in and winter cold out but its low loft allows use of firearms and other tools of the trade. Goatskin remains pliable and comfortable in cold weather. The 5.11 patented Tactical Touch™ fingertip construction eliminates the fingertip seam that impedes tactility in other gloves and improves fit at the most critical part of the glove – your fingertips. Sizes: S – 2XL Colours: Black 019 Page: 29

TAC AKL Gloves LPA-5S-59339

• F ull Kevlar® flash and slash protective lining • Tough full goatskin leather outer shell. • Tactical Touch™ precision fit fingertips for maximum dexterity and comfort. (Patent # 7,287,285) eamless palm • S • Gathered elastic wrist closure • Care: Hand wash in cool water, line dry, do not use bleach or iron • B uilt with American made Kevlar® fabric

The new Tac AKL is an all leather glove with full Kevlar® liner for maximum durability and 360° protection from flash and slash hazards. Supple but durable goatskin surrounds your hands in comfort with excellent dexterity and pliability making the Tac AKL a great choice for wear on patrol and most other duty applications. The knit Kevlar lining is precision fit into the shell so you can perform all tasks from driving to pat downs without removing your gloves or sacrificing sensitivity. Sizes: S – 2XL Colours: Black 019

ATAC Gloves LPA-5S-59353

• Foam-backed coated Kevlar® knuckle protection impact zone • Coated Kevlar®/nylon thumb saddle reinforcement • Flexible TPR exoskeleton impact and abrasion protection • Extra padding on thumb joints • Extended padded cuff protects against abrasion and impact • Duraclad protective layer on palm and fingers • Stretch nylon back panel • Elastic wrist gather and velcro closure with closed gusset to keep debris out • Patented Tactical Touch™ fingertip construction (Patent # 7,287,285) • Synthetic leather cuff binding

By partnering with Ironclad Performance Wear®, 5.11 Tactical® gloves set new standards for dexterity, fit, and durability and provide you with gloves you can depend on. Sizes: S – 2XL Colours: Black 019

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

TAC NFO2 Gloves LPA-5S-59342

• N omex® flash protection on wrist, and back of hand and fingers • Goatskin leather palm, finger facings and fourchettes, and knuckle reinforcements. • Tactical Touch™ precision fit fingertips for maximum dexterity and comfort. (Patent # 7,287,285) • Seamless palm for better grip and no irritation • Gathered elastic wrist closure with goatskin leather reinforced pull tab and edge binding • Built with American made Nomex® fabric

Our new Tac NFO2 Tactical Gloves feature exceptional fit and dexterity and innovations you won’ t find elsewhere. We replaced the common Nomex® fourchettes with tough but pliable goatskin to give your fingers three sides of protection. This also helps keep the fingers from twisting, as you’ve seen on so many other flight gloves. Sizes: S – 2XL Colours: Black 019

Scene One Gloves LPA-5S-59352

• TPR knuckle and joint protection • Synthetic leather palm, finger facings, and fourchettes • Padded palm with Duraclad reinforcements • Duraclad reinforcement on thumb and fingers • S tretch nylon finger saddles and back panel • Patented Tactical Touch™ fingertip construction (Patent # 7,287,285) • Molded neoprene cuff with velcro closure • Extended wrist pull tab • ID label on wrist • Care: Hand wash in cool water, line dry, do not use bleach or iron

Looking for an uncommon Duty glove that will stand up to the diverse tasks you perform every day? The Scene One is a great choice for dexterity, durability, and protection from impact and abrasion. Whether you’re writing a ticket, working a bar fight, picking up after an accident, or handling a weapon, the Scene One can handle it all.

Tac AK2 Gloves LPA-5S-59341

• Kevlar® back panel • Tactical Touch™ precision fit fingertips • Durable goatskin leather palm, finger facings and fourchettes, finger joint and knuckle reinforcements, wrist closure and pull tabs • Padded palm and knuckle protection • Neoprene and Velcro® wrist closure • Reinforced pull tab • Lightweight and fast drying • Care: Hand wash in cool water, line dry, do not use bleach or iron • Built with American made Kevlar® fabric

When duty calls and flash and slash hazards are unavoidable, our Tac AK2 Gloves stand ready to provide you with performance that common tactical gloves can’ t match. The knit Kevlar® on the back of the glove provides protection from short duration exposure to flames as well as being cut-resistant. Sizes: S – 2XL Colours: Black 019

Sizes: S – 2XL Colours: Black 019 Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 30


5.11 Tactical

Station Grip

TAC A2 Gloves

LPA-5S-59351 • • • • • • •

LPA-5S-59340

Perfect for everyday wear Four-way stretch back panel Reinforced palm and fingers Padded knuckles Dries fast and retains shape Elastic wrist closure ID tag on pull tab

The 5.11 economical Station Grip glove helps you perform a variety of tasks with great dexterity and comfort. To provide excellent fit, our knit back panel stretches in four directions to move with your hands, maintaining protection and dexterity at all times. The reinforced palm and fingers are flexible and tough but promote a high level of tactility while protecting your hand from abrasion and rough work. The Station Grip is washable and dries fast so feel free to use it for even the dirtiest jobs. Whether you use them on or off duty, the Station Grip will become one of your favorite pieces of hand protection. Sizes: S – 2XL Colours: Black 019 Page: 31

• • • • • • • • • • •

Perfect for everyday wear Tactical Touch™ precision fit fingertips Synthetic leather suede palm Reinforced saddle between fingers Breathable stretch nylon back panel Synthetic leather grip pads Reinforced finger joints Lightweight and fast drying Sweat wipe panel on thumb Neoprene and Velcro® wrist closure Reinforced pull tab

The Tac-A2 is an all-around duty and tactical glove and an excellent value. The Tac A2 glove features our patented TacticalTouch™ fingertip construction system for maximum dexterity and longer service life. There is no seam at the fingertip to add bulk, wear out, or irritate you. The lightweight construction of the Tac A2 glove allows better sensitivity during pat-downs than most leather gloves and they are snug enough for use as a shooting glove. Sizes: S – 2XL Colours: Black 019

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

RUSH 12 Backpack LPA-5S-56892 • • • • • • • • • • • • •

Main compartment: 18” x 11” x 6” Capacity: 1296 cu in/21.2 liters Water-resistant 1050D nylon 16 total compartments, pockets, and slots to stow and organize your gear Large zippered administrative compartment with 9 pockets and slots Zippered fleece-lined eyewear pocket Compatible with hydration systems up to 60oz Web platform on front, sides & straps Two external compression straps Contoured yoke shoulder strap system with elastic keepers for strap ends Adjustable height sternum strap Self-repairing YKK® zippers Velcro name-tape and flag/patch holders

Sized for use as a Go-Bag, day trips, office commutes, or as a smaller carry-on, the RUSH 12™ pack is loaded with most of the same features as its larger teammates for maximum utility. Colour: Black 019, Sandstone 028, MultiCam 169, Flat Dark Earth 131 TAC OD 188

RUSH 24 Backpack LPA-5S-58601 • • • • • • • • • • • • • • • • • •

20 H x 12 W x 7 D Water-resistant 1050-denier nylon Flexible main storage compartments Compression straps and Sternum straps Molle-compatible webbing on front and sides Elastic keeper for strap ends Adjustable, dual density closed-cell foam shoulder straps with Duraflex(TM) hardware Closed-cell foam back Padded hydration pocket Generous web-platform on three sides with additional attachment points Features a large main compartment Three mesh interior organizing pockets One fabric pocket with zippered pull-cords One interior stuff-pocket with draw cord Two drainage holes on bottom of pack Two exterior, side, flat, zippered pockets; Top exterior book-end pockets with nonscratching fleece-lined organization Top, quick-access non-scratching fleece-lined sunglass pocket

Colour: Black 019, Sandstone 028, MultiCam 169, Flat Dark Earth 131 TAC OD 188

RUSH 72 Backpack LPA-5S-58602

• 58cm x 38 x 20cm • Adjustable, dual density closed-cell foam shoulder straps with Duraflex(TM) hardware • Closed-cell foam back padded hydration pocket, two back-to-back zippered pull tabs • Nametape and flag holders • Generous web-platform on three sides with additional attachment points • Features a large main compartment • Three mesh interior organizing pockets • One fabric pocket with zippered pull-cords • One interior stuff-pocket with draw cord • Two large metal grommet drainage holes on bottom of pack • Large, external shove-it pocket • Two exterior, side, gusseted zippered pockets • Four compression strap (two each side) • Top exterior crescent-shaped organization pocket with mesh interior zippered pocket • Top, quick-access fleece-lined sunglass pocket • Exterior admin organizational pocket.

Colour: Black 019, Sandstone 028, MultiCam 169, Flat Dark Earth 131 TAC OD 188

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 32


5.11 Tactical

Bail Out Bag LPA-5S-56026 • • • • •

Made for Active Shooter Response Teams 1050D nylon construction Front mag pockets hold up to 6 AR magazines Side utility pockets with web platforms Interior of bag lined with loop sided Velcro to attach pouches • Body-side interior features web platform • Back of bag features padded aero-mesh • Adjustable strap with quick-release and removable shoulder pad

Designed for the Active Shooter Response Teams, the 5.11 Bail Out Bag features tough 1050D nylon body fabric construction that delivers extreme versatility. While staying close to the body, the Bail Out Bag provides users with easy access to all its compartments while still being compact enough to deploy from a vehicle. The Front Mag pockets hold up to 6 AR magazines with the side utility pocket designed with web platforms. You can rest assured that the 5.11 Bail Out Bag will have all the room you need for easy deployment. Colours: Black 019, Flat Dark Earth 131 Page: 33

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

COVERT18 Backpack LPA-5S-56961 • • • • • • • • • •

Yoke-style shoulder straps with grab handle 500D/420D Water-Resistant Nylon Straps with QuickTact™ accessory straps Sunglass pocket Adjustable sternum strap Flip-down ID panel Padded internal laptop sleeve Compression straps YKK® zippers, Duraflex® hardware Ambidextrous side-entry Back-Up Belt System® compartment • Concealed R.A.C. (Roll-down assault compartment)

Lightweight pack including a huge number of pockets and compartments. Colours: Black/Asphalt 021, Deep Moss Green/Black 189, Mantis Green/Dark Oak 193, Code Red/Steel Grey 475, True Navy/ Asphalt 726

LBE Vest LPA-5S-58631 • • • • • • • •

Stiffened Mesh Nylon Hidden document pockets Hidden grab handle Hydration Pocket Adjustable in girth and length Molle attachment system High impact plastic clips Two colors; black and flat earth dark

If you are looking for a load-bearing vest designed for special operations and tactical situations, look no further. In partnership with Kyle Lamb, 5.11 Tactical Series has produced the ultimate load-bearing platform. The LBE Vest is made from a stiffened mesh that provides the necessary structure for all your gear, yet allows air in for ventilation and breathability. The 5.11 Slickstick™ accessories are compatible with standard molle attachment systems, yet functions like none other. Size: Reg, 2XL, 4XL Colours: Black 019, Flat Dark Earth 131

Tactical Vest LPA-5S-80001 • • • • • • • • • • • •

Designed for concealed carry Back-Up Belt System™ Hidden BBS™ pockets on each side of vest 18 Pockets Key hook for safe access to your keys Quad-stitched and bartacked at stress points Two layers of 8.5 oz., 100% cotton canvas Two pockets sized for AR Magazines Rear water bottle pockets Reinforced half-collar 360 degree pocket Perfect for the Outdoors.

Eighteen pockets in all including, two concealed carry compartments which can store a full sized handgun and any associated gear Sixteen other pockets include storage for AR magazines, a radio, maps, water bottles and any other items you might need. There’s even a 360 degree pocket that wraps completely around the vest to accommodate large bulky items. Size: S – 3XL Colours: Black 019, Khaki 055, OD Green 182

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 34


5.11 Tactical

Backup Belt System LPA-5S-59007

• Heavy duty nylon • Pouch storage bag which can be used as toiletry kit • Pouches feature a hook-side Velcro® backing • Attaches to compatible 5.11 garments • Cuff Pouch for handcuffs • Holster which adjusts to a variety of handguns (includes adjustable locking straps) • Baton Pouch for an expandable baton • Mace/Light Pouch for mace canister or flashlight • Double Pistol Magazine Pouch • Proprietary Back-up Belt System™

Rifle Mag Pouches 58706 – Stacked Double with Cover 58705 - Stacked Single with Cover 58708 - Double Carrier with Cover 58707 - Single Carrier with Cover Colours: Black 019, Coyote 120

Pistol Magazine Pouches

LPA-5S-58712 - Double Pistol Mag Pouch LPA-5S-58711 - Pistol Mag Pouch Colours: Black 019, Coyote 120

The 5.11 Back-up Belt System™ is a unique system which provides secure storage of gear in many compatible garments made by 5.11 Tactical Series®. The Back-up Belt System Kit includes five pouches specifically designed to secure police gear,. Colours: Black 019

Page: 35

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Thigh Rig

10.6 Pouch

LPA-5S-58633 • • • •

LPA-5S-58716

Molle attachment system Built in mesh drop pocket High impact plastic clips 500D nylon

• Slickstick™ molle attachment system • YKK® zippers • 1000D nylon

As an operator you’ll need to place critical gear where you can access it quickly. Our Thigh Rig is designed to give you that access along with exceptional versatility. The Thigh Rig attaches to your belt and is secured around the thigh with high quality nylon and high impact plastic clips. The face of the rig features molle attachment straps which can accommodate all of our Slickstick™ accessories and pouches. You choose what accessory you need for your operation. Whether it is a med kit, extra mag pouches or drop pouches, you choose what you need when you need it.

This 10.6 Horizontal Pouch attaches quickly to any molle compatible system to help you organize critical gear. This 10.6 Horizontal Pouch can be used to stow small items on the exterior of a pack, vest or gear bag; providing easy access to necessary items. Made of 1000D nylon, this 10.6 Horizontal Pouch is extremely durable and can be easily removed and relocated to other molle compatible systems using our Slickstick™ molle attachment system. Colours: Black 019, Flat Dark Earth 131, Tac OD 188

10.6 Pouch LPA-5S-58780 • • • • • • •

Body Fabric 1050D Nylon Velcro® Lining Patented Slick Stick attachment system Stiffened, angled thumb break Adjustable inner retention system Velcro® reducer strap Velcro® stand off tool included

This simple yet versatile nylon holster features a unique Velcro®Reducer strap that constricts the bottom of the holster to fit handguns with and without a light. This innovative holster fits most handguns and lighting systems. Right hand only. Colours: Black 019, Flat Dark Earth 131, Tac OD 188

Colours: Black 019, Flat Dark Earth 131

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 36


5.11 Tactical

6.10 Pouch (Vertical) LPA-5S-58717 • • • •

Slickstick™ molle attachment system YKK® zippers 1000D nylon Two colors; black and flat earth dark

This 6.1 Vertical Pouch attaches quickly to any molle compatible system to help you organize critical gear. This pouch can be used to stow small items on the exterior of a pack, vest or gear bag; providing easy access to necessary items. Made of 1000D nylon, this 6.1 Vertical pouch is extremely durable and can be easily removed and relocated to other molle compatible systems using our Slickstick™ molle attachment system. Colours: Black 019, Flat Dark Earth 131

Page: 37

H20 Carrier LPA-5S-58722 • • • • •

Slickstick™ molle attachment system High impact locking clip Prym Snaps 1000D nylon Two colors; black and flat earth dark

The H2O carrier attaches quickly to any molle compatible system keep your water bottle accessible and secure. Made of 1000D nylon with a high impact locking plastic clip this H2O carrier is extremely durable and practical. The H2O carrier can be easily removed and relocated to other molle compatible systems using the Slickstick™ molle attachment system. Colours: Black 019, Flat Dark Earth 131, Tac OD 188

C5 Case LPA-5S-56030 • • • •

Slickstick™ molle attachment system High impact locking clip Prym Snaps 1000D nylon

The 5.11 C5 Case for your larger phone or PDA attaches quickly to any molle compatible system to keep your phone or PDA accessible and secure. Made of 1000D nylon with a high impact locking plastic clip this pouch is extremely durable and practical. The C5 Case can be easily removed and relocated to other molle compatible systems using our Slickstick™ molle attachment system. The C5 Case also snaps easily to your belt. Colours: Black 019, Flat Dark Earth 131

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

6.6 Pouch (Vertical) LPA-5S-58713 • • • •

Slickstick™ molle attachment system YKK® zippers 1000D nylon Two colors; black and flat earth dark

The 5.11 6.6 Pouch attaches quickly to any molle compatible system to help you organize critical gear. This pouch can be used to stow small items on the exterior of a pack, vest or gear bag; providing easy access to necessary items. Made of 1000D nylon, this pouch is extremely durable and can be easily removed and relocated to other molle compatible systems using our Slickstick™ molle attachment system.

6.6 Padded Pouch LPA-5S-58714

This padded pouch can be used to stow and protect small items on the exterior of a pack, vest or gear bag, providing easy access to necessary items. Made of 1000D nylon with 5mm padding, this padded pouch is extremely durable and practical. The padded pouch can be easily removed and relocated to other molle compatible systems using our Slickstick™ molle attachment system. Colours: Black 019, Flat Dark Earth 131

Colours: Black 019, Flat Dark Earth 131, Tac OD 188

Med Pouch Open

6.6 Med Pouch LPA-5S-58715 • • • • • • •

Multi-compartment Medical Pouch Slickstick™ molle attachment system YKK® Zippers Mesh interior Pockets Medical Cross for quick ID 1000D Nylon Holds EMT medical gear

The 6.6 Med Pouch is designed to secure first aid supplies to your pack or vest using a molle attachment system. The pouch has a first aid cross on the front for immediate recognition. With two zippered internal mesh pockets to help you organize your first aid equipment and allow you to see where critical items are located, the 6.6 Med Pouch can be attached to the molle straps of any molle compatible pack or vest. The 6.6 Med Pouch uses our Slickstick™ molle attachment system that makes attachment of the Medical Pouch to packs or vests quick and easy. Colours: Black 019, Flat Dark Earth 131, Tac OD 188

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 38


5.11 Tactical

C3 Case - S (Small Phone) LPA-5S-56028 • • • •

Slickstick™ molle attachment system High impact locking clip Prym Snaps 1000D nylon

The C3 Case attaches quickly to any molle compatible system to keep your small phone accessible and secure. Made of 1000D nylon with a high impact locking plastic clip this pouch is extremely durable and practical. The C3 Case can be easily removed and relocated to other molle compatible systems using our Slickstick™ molle attachment system. The C3 Case also snaps easily to your belt. Colours: Black 019, Flat Dark Earth 131

Page: 39

C4 Case (Blackberry) LPA-5S-56029 • • • •

Slickstick™ molle attachment system High impact locking clip Prym Snaps 1000D nylon

The C4 Case for your phone or blackberry attaches quickly to any molle compatible system to keep your phone accessible and secure. Made of 1000D nylon with a high impact locking plastic clip this pouch is extremely durable and practical. The C4 Case can be easily removed and relocated to other molle compatible systems using our Slickstick™ molle attachment system. The C4 Case also snaps easily to your belt. Colours: Black 019, Flat Dark Earth 131, Tac OD 188

Strobe/GPS Pouch LPA-5S-58719 • • • • •

Slickstick™ molle attachment system Elastic Draw cord 10 inch height 6 inch diameter when open 500D nylon

Strobe/GPS Pouch attaches quickly to any molle compatible system keep your strobe or GPS accessible and secure. Made of 1000D nylon with a high impact locking plastic clip this pouch is extremely durable and practical. The GPS pouch can be easily removed and relocated to other molle compatible systems using our Slickstick™ molle attachment system. It also snaps easily to your belt. Colours: Black 019, Flat Dark Earth 131

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Cuff Case (Blackberry)

Drop Pouches

LPA-5S-58721 • • • •

Slickstick™ molle attachment system Quality Velcro closure Prym Snaps 1000D nylon

The 5.11 Cuff Case attaches quickly to any molle compatible system keep your handcuffs accessible and secure. Made of 1000D nylon with a quality Velcro closure this pouch is extremely durable and practical. The Cuff Case can be easily removed and relocated to other molle compatible systems using the Slickstick™ molle attachment system. This case also attaches easily to your belt.

LPA-5S-58704 11” Height, 8” when open (XL) LPA-5S-58703 10” Height, 6” when open (L) LPA-5S-58702 9” Height, 4” when open (M) • • • • •

Slickstick™ molle attachment system Elastic Draw cord 10 inch height 6 inch diameter when open 500D nylon

Flash Bang Pouch LPA-5S-56031 • • • •

Slickstick™ molle attachment system Quality Velcro closure Prym Snaps 1000D nylon

Colours: Black 019, Flat Dark Earth 131

Colours: Black 019

Colours: Black 019, Flat Dark Earth 131

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 40


5.11 Tactical

RUSH MOAB10

RUSH MOAB6

LPA-5S-56964 • • • • • • • • • •

LPA-5S-56963

Mobile operation attachment bag Tier System - attaches to RUSH backpacks Ambidextrous cross-body shoulder strap Coms pocket with pass-through for mic Concealed pistol compartment Hydration pocket (1.5ltr) with port Padded back with ventilation channels Fleece lined sunglass pocket 050D water resistant nylon, YKK™ zippers Interior admin panel and stash pockets

MOAB stands for Mobile Operation Attachment Bag and with the new Tier System can rapidly connect/disconnect to any of our RUSH series of packs, DC Roller and bags with web platform. The MOAB’s include similar features from our RUSH series of packs, including a top-access fleece-lined, non-scratching sunglass pocket, internal and external organizing pockets, key chain fobs, front and side web platform, flag and name tape Velcro, carry handle and hydration pouch compatibility.

• Ambidextrous carry system • Tier System connections – can attach to RUSH packs, DC Roller • Quick stash pocket on back • 1050 D nylon • BBS • Internal and external organization • Front and side web platform • Flag Velcro • Front organization • Grab and Go carry handle • M ain compartment- 10.5”H x 9”L x 5”D • Front compartment- 9.5”H x 8”L x 2”D

The RUSH MOAB6 and 10 both have the same great features. Colours: Black 019, Sandstone 328

Rush Tier System LPA-5S-56957

• Versatile 4-piece strap system for attaching 5.11 Tactical® RUSH™ MOAB™ bags to 5.11 Tactical’s other bags with web platforms • Connects any two styles of packs or bags with web platform on the sides • Includes 4 straps and corresponding buckle hardware • Allows for quick connect and disconnect of packs or bags

Versatile 4-piece strap system for attaching 5.11 Tactical® RUSH™ MOAB™ bags to 5.11 Tactical’s other bags with web platforms. Imported. Connects any two styles of packs or bags with web platform on the sides. Includes 4 straps and corresponding buckle hardware. Allows for quick connect and disconnect of packs or bags allowing the end user flexibility to quickly modify their kit, whether in the field, work or play.

Colours: Black 019, Flat Dark Earth 131 Colours: Black 019, Sandstone 328 Page: 41

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Push Pack

RUSH Delivery Messenger Bag

LPA-5S-56037 • • • • • • •

1050D Nylon Large main compartment Two side expanding pockets Zippered Back-up-Belt™ System Pocket Adjustable shoulder strap with removable pad Aero-foam padding on back Nametape and flag holders

Push™, short for Practical Utility Shoulder Hold, is built from rugged 1050D nylon and features a large main compartment with two side-expanding pockets. The side pockets are sized to hold one-litre water bottles. A zippered pocket behind the main compartment has loop-sided Velcro to hold Back-Up-Belt™ System pouches or any other hook sided pouch. An adjustable shoulder strap with removable pad is designed to slip comfortable over your shoulder and is easily adjusted to suit your body type. The bag also features aero-foam padding on the reverse of the Push™ to ensure comfortable carry. Colours: Black 019, Flat Dark Earth 131, TAC OD 188

LPA-5S-56962 • • • • • • • •

Padded 17” laptop compartment Ambidextrous design Back-Up Belt System™ integrated throughout Attaches to 5.11s Wingman Patrol Bag Luggage handle attachment Non-slip shoulder strap 1050D water resistant nylon, YKK® zippers Web platforms on front and sides, flag/ morale patch holder on front • Quick-grab haul handle, compression straps that accept reflective tabs • Back quick-draw, zippered Back-Up Belt System® compartment

This comfortable bag is designed to fit a 15” laptop in a padded, internal sleeve and offers over 20 organizing pockets. Two Backup Belt System pockets (one internal) and one external with zippered and Velcro closure allows you to either completely conceal your weapon, or to have it prepped and not seen. Colours: Black 019, Sandstone 328

Mission Ready LPA-5S-56005 • • • • • • • • • • • • •

Three exterior pockets: R. Side Pocket (x2) 7.5”H x 6.25”L x 1”D R. Side Pocket (x1) 10.75”H x 6.25”L x 1”D Weight 5.2 KGS Internal mesh dividers separates upper and lower gear Side and top pockets manage smaller items Heavy duty wheel and axle Collapsible handle for easy transport Reinforced base corners and skids Top of the line YKK zippers 5 external pockets Adjustable high impact plastic locking clasps Four external carry handles

Designed for any operation, the Mission Rolling Duffle Bag has all the storage space you’ll need for your gear and clothing. When your duffle bag is fully loaded we’ve made sure that it is easy to transport by including a collapsible handle, heavy-duty wheels and axle, and reinforced bottom corners and skids. Colours: Black 019, TAC OD 188

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 42


5.11 Tactical

DC Roller Travel Bag LPA-5S-56038

• Innovative wheeled carry-on with removable garment bag • Rugged yet lightweight construction • Sturdy 1050D nylon exterior with neutral colored interior • Front pocket Back-Up Belt System • Quick-access top pockets • Mesh pocket on lid interior • Collapsible and removable web platform handles • Includes shoe/laundry bag • Compression straps with ditty bag • Reinforced edges and sliders • Expanding 2 zipper • ID pocket with retention

Inside the DC Roller™ you will find a spacious interior that has neutral colored interior. Additionally you will find a removable garment bag, a shoe and laundry bag, and finally a gitty bag for storing small items. Colours: Black 019

CAMS 40” Outbound SOMS Outbound Bag LPA-5S-59097 • • • • • • • • • • • • • •

40” x 15” x 16” 40” main compartment 1600 Denier Heavy duty oversized wheels and skids Rugged corner guards on all corners Double self retracting handles at each end Light colored interior for better visibility MOLLE/ALICE-compatible interior panel Adjustable inside loop-sided dividers Reinforced, rigid ends and bottom Lockable YKK® zippers Name tape and flag holders Markable name strips Business card holder and document pocket

Developed for the outbound operators, the CAMS™ bag is massive enough for armor, clothing, hardware and more. Built extra sturdy to tolerate transport when packed, while underneath is a gigantic base compartment that can accomodate a full-sized AR. Rugged enough to survive transport when fully loaded this rigid bag is versatile and adjustable. Colours: Black 019, Sandstone 328

Page: 43

LPA-5S-58749 • • • • • • • • • • • • • • •

32”X15.5”X13.5” 32” main compartment 1600 Denier Heavy duty oversized wheels and skids Rugged corner guards on all corners Double self retracting handles at each end Light colored interior for better visibility MOLLE/ALICE-compatible interior panel Adjustable inside loop-sided dividers Replaceable fiberglass laminate frame Reinforced, rigid ends and bottom Lockable YKK® zippers Name tape and flag holders Markable name strips Business card holder and document pocket

This SOMS™ 32” Outbound bag is oriented for the outbound operator with enough room to stow most of your gear from armor and clothes to guns and accessories. Rugged enough to survive transport when fully loaded this rigid bag is versatile and adjustable.

Colours: Black 019

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Range Qualifier Bag LPA-5S-56947 • • • • •

Measures approximately 8-3/4’ x 13” x 10-1/4” Main front panel includes magazine pockets Removable ammo tote Bag front drops down flat for a work area Tough 600-denier polyester

Colours: Black 019

Range Ready Bag LPA-5S-59049

• 9X18 X10 main compartment • 6X16X7 removable ammo tote and brass bag with two side zipper pockets • YKK® zippers • Made from 600-denier polyester • Eight pistol magazine holders • Padded side pockets in main compartment to accommodate and protect pistols • Durable nylon carrying handles • Removable shoulder strap with robust clips • 6” double zippered main compartment closure flap with Velcro closure • Water bottle holder

If you are headed to the range, you’ll want to have the Range Ready bag at your side. This is the ultimate in design for carrying multiple pistols to the range with all the necessary accessories and tools. There is plenty of room for hearing protection, ammo, magazines, pistols, cleaning supplies and tools. There’s even an external water bottle holder.

Colours: Black 019

Side Trip BriefCase LPA-5S-56003 • • • • • • • • • • •

16.5X12.5X5.5 inside main compartment Two front pockets measuring 7X10X2.5 Large back pocket measuring 16.5X10.5X2 Molle/Alice interior panel Made from 1000-denier textured nylon Luggage handle panel Name tape holder Hidden pocket with full Back Up Belt System™ Light colored interior for easy access to gear Expandable side pockets Molded handle

Looking for a multi-functional, medium sized gear bag that can conceal a firearm, hold a laptop and accommodate all of your day-to-day gear? Well, look no further. 5.11 Tactical’s Side Trip Bag serves as a briefcase, gear bag and travel bag all in one. This businesslike bag has features that will offer the operator or officer a professional looking and durable briefcase. The inner lining is lined with loop Velcro® which allows you to attach our holster pouch to accommodate a handgun. Colours: Black 019

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 44


5.11 Tactical

Single Gun Case LPA-5S-58621 - 36” Case LPA-5S-58622 - 42” Case • • • • • • •

1,050-denier nylon Water resistant Exterior and interior molle compatible panels YKK® zippers Top and bottom compression straps Removable shoulder strap Hook-and-loop lashing points

Protect your valuable long guns with 5.11 Tactical Series padded gun cases. Loaded with features to secure your rifles and shotguns along with necessary accessories and ammo, our 42” long gun cases are designed by operators for operators. 5.11 VTAC cases are built with durable, water resistant 1,050-denier nylon and rugged YKK® zippers. Exterior and interior mollecompatible panels will accept any VTAC pouch or other molle compatible item. The main compartment features dividers in the corners and hook-and-loop lashing points to secure your firearms. Colours: Black 019, Sandstone 328 Page: 45

Double Rifle Case LPA-5S-58754 • • • • • • • • • • • • •

1,050-denier nylon Water resistant Closed cell foam padding Exterior and interior molle compatible panels YKK® zippers Top and bottom compression straps Backpack straps Hook-and-loop lashing points Nametape holder ID window Name strip Flag holder Internal Measurements 44-1/4 x 12 x 3 1/2

Colours: Black 019, Sandstone 328

Kit Bags

LPA-5S-58725 14 x 24 x 24cm - (S) LPA-5S-58726 20.5 x 25.5 x 33cm - (L) • • • • • • • •

YKK® zippers Fold out organizing panel Three compartments Heavy duty nylon handles 1050 D nylon Non-slip padded shoulder strap High impact plastic D rings Measurements L 5 1/2 x W 9 1/2 x H 9 1/2

You’ll find the new Kit Bag to be truly utilitarian and incredibly versatile. There are unlimited uses for the Kit Bag from a tool kit to a toiletry kit. It features a fold out organizer panel with multiple zippered mesh pockets, YKK® zippers and padded shoulder strap. The main compartment is 5 ½” x 5 ½” x 9”. The third compartment on the back of the Kit Bag will handle the last of your critical gear. Made from 1050D nylon, this Kit Bag will endure the harshest environments and be there for you when you need it. Colours: Black 019

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Single Pistol Case LPA-5S-58724 • • • • • • •

1050D Nylon 11 by 8 1/2 Padded Lockable YKK zippers Markable name stripe Heavy duty elastic magazine holders Durable nylon handles

With input from special operations and patrol officers 5.11 Tactical Series brings you a lockable, soft-sided pistol case. This closed cell foam padded case will protect your pistol and hold extra magazines, ammo and gear. We use lockable YKK zippers to secure your firearm and added five elastic holders to secure additional magazines, lights or cleaning gear. The single pistol case features a name stripe for labeling the case with your name or the type of pistol you are carrying. Once again, you can depend on 5.11 Tactical Series to bring you innovative storage cases for your critical gear. Colours: Black 019

Thumbdrive Drop & Offset Kit LPA-5S-50028 • • • • •

Two adjustable ballistic nylon tension straps Rubberized threads Quick detach buckle Height-adjustable drop leg strap Durable swivel clip

The ThumbDriveTM Thigh Rig attachment is designed to allow you to easily attach your ThumbDriveTM holster onto a flexible leg platform. There are two adjustable ballistic nylon leg tension straps with rubberized threads sewn through to keep the rig from sliding or shifting from the weight of a holstered firearm. Each strap comes with an easy to use, quick detach buckle. Mounting holes are built in across the platform to allow the wearer to adapt it to an array of accessories in a configuration of their choosing. A height-adjustable drop leg strap comes with a durable swivel clip that permits the reinforced strap to bend at the waist without bulging. Hardware is supplied with the set.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 46


5.11 Tactical

VTAC 2 Point Sling LPA-5S-59120 • • • •

High impact plastic slides Heavy duty nylon High impact clips Butt Stock Adapter not included

LPA-5S-59123

• High impact plastic slides • Heavy duty nylon • High impact clips

The VTAC 2 Point Sling is brought to you as a partnership between Special Operations Combat Veteran, Kyle Lamb and 5.11 Tactical Series. Kyle is one of the most credible and sought-after shooting and tactics instructors in the country and his designs have been proven on the field of battle. The VTAC 2 Point Sling allows the shooter to adjust the overall length of the sling for rapid transitions from strong side to support side and back. By pulling the free-running end of the sling you can snug your rifle up to your body and by pulling the release you can easily release the sling to its original length. This gives you great flexibility in tactical situations and provides a VTAC 2 Point Sling that can be used for stable shooting when you need it. The VTAC 2 Point Sling comes in a padded and standard version. Page: 47

Padded Sling

The VTAC 2 Point Sling is brought to you as a partnership between Special Operations Combat Veteran, Kyle Lamb and 5.11 Tactical Series. Kyle is one of the most credible and sought-after shooting and tactics instructors in the country and his designs have been proven on the field of battle. The VTAC 2 Point Sling allows the shooter to adjust the overall length of the sling for rapid transitions from strong side to support side and back. By pulling the free-running end of the sling you can snug your rifle up to your body and by pulling the release you can easily release the sling to its original length. This gives you great flexibility in tactical situations and provides a VTAC 2 Point Sling that can be used for stable shooting when you need it. The VTAC 2 Point Sling comes in a padded and standard version.

Basic Single Point Static Sling LPA-5S-54001 • • • • • •

Mini stainless steel snap shackle Duraflex S/R buckle ITW Tri Glide Comes with 3 attachments Reusable vinyl bag Nylon webbing

Leveraging the popularity of our two-point slings in the marketplace, we now bring innovation and a value price to two single point slings. Our slings come with three attachment methods to fit a variety of weapons. Adjustable length.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Light for Life Flashlight PC3.300 LPA-5S-53001

• 200 lumens peak output • Charges in 90 Seconds • Up to 1 hour runtime • No batteries to replace • Peak, Standard and Strobe power modes • 12V DC MagnetoAlign base • Top button and tail-cap button • Size 8.75” and 10 oz. The solidstate, 8.75” 5.11 Light for Life® PC3.300 is ruggedly built, buoyant and water-resistant. Its high-strength polymer casing is abrasion, crack and bendresistant. The PC3.300 will run for 45 mins in standard mode, plus an additional 15 minutes in reserve mode. The 5.11 Light for Life® PC3.300 offers three power modes: bright (200 peak lumens), standard (70 lumens) and tactical strobe. The 50,000hour LEDs never have to be replaced. Includes a patent-pending Auto-Align 12V DC charging base for the car and a AC adapter.

Light for Life Flashlight UC3.400 LPA-5S-53000

• BARREL DIAMETER - 1 3/4 in, 4.5 cm • LENGTH - 11.5 in, 29.2 cm • HEAD DIAMETER - 2.75 in, 7 cm • WEIGHT - Approx. 16oz. • Made of durable polymer. • Impact, abrasion, and water resistant • Recharges in 90 Seconds. • Run time = 120 minutes • Contains 3 LEDs (50,000+ hours) • Box Dimensions will be 13 x 8 x 4 • Comes with 12 Volt DC Charger, Plastic Belt Ring with Nylon Strap, and a mounting bracket. 5.11 Tactical bring you a flashlight that will revolutionize the portable lighting category and be true to our brand and our customers. The UC3.400 provides the longest uptime, the fastest recharge on the market it is environmentally friendly, and you will never need to replace your flashlight. Three kinds of programming available: default, ramp and document.

Extra Charging Base UC3.400 LPA-5S-53121

• Voltage: 12V • Power: 50W • Charge Time: 90seconds • Width: 3.4 • Length: 4.25 • Height: 1.27 • Weight: 6.6oz • Indicator: Blue LED • Housing Color: Black • Cord Length: 3 feet • The 12V DC Charging Base/Car Charger is made exclusive for the Light for Life® UC3.400.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 48


5.11 Tactical

HRT Titanium Watch LPA-5S-59209

• Titanium case • SureShot™ calculator • Rubber and leather interchangeable wrist bands • Digital and analog readouts • Uni-directional bezel • Chargeable luminescent markings • Waterproof to 30 meters • Day, date, 2nd time zone, alarm, chronograph, countdown timer, hourly chime

Extended watch straps and Nylon replacements are available.

Padded Sling LPA-5S-59245 • • • • • • • • •

High-density polycarbonate frame SureShot™ calculator Rubber wrist band Digital compass Digital readouts Uni-directional bezel Backlight Waterproof to 30 meters Optional extended band for wearing the watch over gloves or clothing • Day, date, 2nd time zone, alarm, chronograph, countdown timer, hourly chime

One size Colour: Black, Coyote Brown, OD green

Page: 49

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


5.11 Tactical

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 50


Böker

A huge chestnut-tree towering above the small Böker hardware-factory in the 17th century is the oldest traceable fact about the Böker family. Böker tools were very successful, for they remain among the leading products in Germany and neighboring countries a hundred years later. Due to rising demand in a politically restless era Hermann and Robert Böker decided to start with the production of sabres in 1829. Inventories of September 1830 already prove a weekly production of 2000 pieces, made by 64 smiths, 47 grinders and a lerge number of labourers. With an ever growing variety of tools and cutlery combined with the possibilities of international marketing the family realised that responsibility assignment was crucial to keep their chances. So Hermann Böker emigrated to found Boker & Co. in New York, whereas the younger Robert established his company in Canada and 1865 a branch of it in Mexico, market leaders under the name of Casa Boker to this very day.

Page: 51

Heinrich only crossed the river Wupper to go to Solingen, where the German cutlery industry was booming, to found Heinr. Böker & Co. with the well-known cutleryexpert Hermann Heuser in 1869. The Bökers in Remscheid and their cousins overseas were very interested and in demand of razors, scissors and pocketknives from Heinrich´s new enterprise. They had to label their products in a simple manner for overseas-markets, for many customers had problems spelling the German name Böker - apart from widespread analphabetism. Heinrich considered the chestnut-tree as an ideal memorable logo, which belonged to the Remscheid company with another one, an arrow. One of the rare and precious documents, which survived the total destruction of WW II is an ad of Böker Remscheid from 1874, showing both logos. The relationship between the two Böker companies has always been very friendly. Heinrich was allowed to take the tree-brand with him across the river without troubles or payments. Since then not a single product has left the Solingen factory without this

sign. After over 100 years of existence the venerable tree was cut down by a stroke of lightning in 1925. A gifted artist carved an image of the majestic tree into a piece of original treetrunk, which adorns the executive´s office in Solingen. The US-market became the main customer of Böker production as early as 1900 with H. Boker & Co. in New York concentrating on Solingen cutlery. The demand for pocket-knives soon beat that for other products like scissors or razors. In due course the Solingen capacities were exhausted and the New Yorkers started their own pocket-knife production, to which pliers were added later. Because of the tree-brand being well established by then and the good understanding within the international Böker family there wasn´t any problem to get permission from Solingen to use the tree-brand for American products too. Since then there were two different lines of Böker knives on the US-market, with identical logos and sometimes even identical item numbers, one line Made in USA, the other Made in Solingen, only to be distiquished by the markings “Boker USA” or “H.Boker Improved Cutlery Solingen”.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Böker

During WW II the contact to USA died. The Solingen factory was completely destroyed with no remaining machines, tools, catalogues or samples. The few old originals we have at our disposal today survived the war in private ownership and were provided to us. The company also lost one of its most precious commodities: the tree-brand registration was seized according to US law. John Boker jr. bought it in New York to save it for the further sale of American and German products. Soon after the war new life began to wake in the destroyed factory. The former craftsmen came back and helped to reconstruct buildings and production and to regain the high standard of quality. Restoring their business relationship to Solingen the American cousins placed first orders. Within a few years Boker New York was the principal customer again. The models 7588, 7474 and the old flagship model 182 couldn´t cross the ocean fast enough to reach Böker friends all over the country.

In the early 1960s Boker USA was sold to the well-known scissors-manufacturer Wiss & Sons, who kept up the production of Böker knives to sell them with Solingen products. Böker scissors disappeared from the market, being a competitor to Wiss. In the early 1970s Wiss sold to the multinational Cooper Industries. For Böker this change proved benificial, generating a close business and personal relationship with Cooper, who restored the name of Böker to its former greatness. During the eight years this active relationship lasted, Solingen was able to rationalise production and develop new modern products. Today Böker offers the broadest range of sports and collector´s knives with an anmatched variety of blade and handle materials. Cooper stopped their own knifeproduction in 1983. Actual models are still in production in Solingen. Three years later Solingen reacquired the rights for the Ameriacan brand as a result of friendly negotiations with Cooper and was therfore in the position to enter the huge American market. In July 1986 Boker USA, Inc. was established in Denver, Colorado with Chuck Hoffmann, one of the original

team members, still in position as general manager with a young and flexible team. Böker ows its high importance in the South American markets in Argentina, Chlie and Mexico to the able men of the Böker family who worked for us there in the 19th and 20th centuries. The current trademark includes the labels TREEBRAND and ARBOLITO. Due to the extreme economic and political fluctuations in Argentina the good name of ARBOLITO was on the verge of falling into oblivion. In 1983 Böker Arbolito S.A. was established in cooperation with the Salzmann family, specialising chiefly on household and working knives. Thanks to constant rationalising and product range extension the Buenos Aires company is able to enter worldwide competition with selected products today.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 52


Böker

Böker Plus Anti-Grav Pocket Knife

Böker ApplegateFairbairn fighting Desert Knife

Pocketknife by Boker Plus. The companion to the Anti-MC also features a super sharp ceramic blade and unbelievably, an even lighter carry! The handle is made of carbon fiber, which provides not only incredibly little weight, but also outstanding stability and elegance. Includes pocket clip and lanyard hole. Frame lock mechanism.

Fixed blade knife by Boker. Desert Storm. Based on the original Applegate-Fairbairn fighting knife (model 120543AF), this desert version resulted from Operation Desert Storm. All of the features that made the original fighting knife a classic are retained in this desert version, and are enhanced with a black stainless steel cross guard, black screws and a desert colored handle. The knife is carried securely in the desert tan Kydex sheath. Includes large Tek-Lok system.

LPA-BR-120543DES

LPA-BR-01BO035

Blade length: 3 1/4” Overall length: 7 3/4” Weight: 2.1 oz

Each knife is serialized. Weight : 8.5oz Colours: Desert

Page: 53

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Böker

Böker Plus Exskelibur II

Böker Arbolito Timberwolf Wood

Magnum Black Spear Pocket Knife

Pocket knife by Boker Plus. Mike Skellern, from South Africa, is well known among many collectors in Europe and the U.S. for his stunning pocket knives. We are very proud to present the Exskelibur, a collaboration custom design of Mike Skellern and Fred Burger. This compact folder features all the same specifications as the Exskelibur I, but in a smaller size, and with a traditional nail nick for convenient opening.

Fixed blade knife by Boker Arbolito. Without a doubt, this outdoor knife characterizes the talent of knife smithing expert Armin Stuetz, from Steirer Eisen, Austria, reflecting his sense for clean lines and functionality. The blade is made of high performance 440C stainless steel, flat ground for optimum cutting performance, and molded into a tried and true shape - all topped off with a satin finish. Especially attractive and highly demanding in the manufacturing process is the massive stainless steel handguard, combined with the black fiber spacer. This piece is not only ideal for hunting and outdoor use, but also for the demanding knife enthusiast looking for something special and unique. The handle is crafted of sturdy cocobolo wood, contrasting perfectly with the stainless steel handguard.

Pocket knife by Magnum. This tactical knife is perfect for any mission. The modified 440 stainless steel spear point blade has a slight recurve shape, and is black coated and partially serrated, ideal for chewing through fibrous materials. The sturdy liner lock prevents accidental closing, and the deep finger grooves in the black aluminum handle provide ultimate control. Also features a glass-breaker, lanyard hole and pocket clip. Covert Cargos look like a regular pair of casual pants.

LPA-BR-01BO002

Blade length: 2 7/8” Overall length: 6 5/8” Weight: 2.2 oz

LPA-BR-01BO002

LPA-BR-01RY247

Blade length: 3 7/8” Overall length: 9 1/8” Weight: 8 oz

Blade length: 5 1/4” Overall length: 9 1/2” Weight: 6.8 oz Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 54


CamelBak

Page: 55

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


CamelBak

If you have found yourself wondering - with the unlimited amount of time you have reclaimed by texting instead of emailing what CamelBak is really like, read through our mission statement and values. AN IDEA BORN FROM THE MOST BASIC HUMAN NEED — THIRST

contraption into the back of his bike jersey, throws the thin hose over his shoulder and clamps it with a clothespin. Hands-free hydration is born. And Eidson is able to drink as he pedals...while the other racers laugh and fiddle with their water bottles. OPERATION HYDRATION — THE ROAD TO SURVIVAL

It’s 1988. Bicycle enthusiast, Michael Eidson, is competing in the “Hotter’N Hell 100.” And that’s exactly what it is: a 100-mile road race in the grueling summer heat of Wichita Falls, Texas. Water is vital to surviving the race, and there are few places to refill a water bottle. Eidson, an emergency medical technician by trade, decides to fill an IV bag with water and slip it into a white tube sock. Yes, a tube sock. Then he stuffs the

Jeff Wemmer, a competitive cyclist who fell hard for CamelBak, was so impressed by the product that he started bringing packs to races to sell them. Talk about a fan. CamelBak eventually hired him, and in 1993, Jeff embarked on a road trip to keep the start-up running during very tough times.

Company lore has it that Jeff visited bike shops from Florida to California, pitching our renegade product from the back of his motorcycle. Each order Jeff faxed back to the factory literally breathed another day of life back into CamelBak. THE REST IS HISTORY It took courage, conviction and imagination to evolve from an IV bag in a tube sock sold by a motorcycle-driven sales force of one. Our core values remain the same and drive everything we do - from inventing the hydration category to becoming the world’s leading maker of hydration solutions. Oh yeah...about those bikers who laughed at Eidson? Well, chances are they’ve got a CamelBak strapped to their back or in their bike cage these days. Go figure...

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 56


CamelBak

Linchpin™

BFM™

LPA-CK-61492 • • • • • •

LPA-CK-61072

Hydration Capacity: 102 oz (3.1 L) Cargo Volume: 1800 cu in (29.5 L) Total Volume: 1984 cu in (32.5 L) Pack Weight: 3.28 lbs - empty reservoir Pack Dimensions: 483 mm x 451 mm x 356 m 500D Cordura® Fabric

Featuring the Futura Harness by Mystery Ranch, the Linchpin™ allows the user to custom-fit the harness to a specific torso length. It can also be adjusted for wearing with or without armor. A narrow profile allows the user a full range of motion and easier movement through narrow spaces. Easy-to-fill and clean wide-mouth OMEGA reservoir, rugged and durable Water Beast™ material, leak-proof screw-cap, insulated PureFlow™ tube, patented Big Bite™ Valve, HydroLink™ Exit Port & Drink Port, HydroLock™ one-handed flow control Colour: AUC, Coyote, Foliage, MultiCam® for (NIR) Designed to Carry: Ammunition, Radio equipment Page: 57

• • • • • •

Hydration Capacity: 100 oz (3 L) Cargo Volume: 2929 cu in (48 L) Total Volume: 3112 cu in (51 L) Pack Weight: 5.5 lbs - empty reservoir Dimensions: 530mm x 510mm x 355mm Cordura® Fabric

Camelbak’s biggest system at 45L+ keeps you mobile, comfortable and efficient on even the most intense missions. Includes the 100 oz (3 L) OMEGA® Water Beast™ Reservoir with HydroLink™ Exit Port Additional Features: Full clamshell opening for easy access to gear and MedBak™ Insert (sold separately), ASIPS Radio attachment points hold comms securely with dual antenna ports, glasses, goggles and NVG pocket with external access, multiple drink tube exit ports, lightweight, durable 500D

Motherlode LPA-CK-61079 • • • •

Hydration Capacity: 100 oz (3 L) Cargo Volume: 2258 cu in (37 L) Total Volume: 2441 cu in (40 L) Includes the 100 oz (3 L) OMEGA® Water Beast™ Reservoir with HydroLink™ Exit Port • Pack Dimensions: 20 in x 14 in x 13.5 in (510 mm x 355 mm x 345 mm) • Pack Weight: 4.8 lbs (2.2 kg) with empty reservoir

An Air Director™ back panel and 500D Cordura® Fabric make this pack one serious mother. Includes the 100 oz (3 L) OMEGA Water Beast™ Reservoir with HydroLink Exit Port

Colour: ABU, AUC, Coyote, Foliage, MultiCam® (NIR)

Colour: ABU, AUC, Coyote, Foliage, MultiCam® meet US Military standards for Near Infrared Reflectance (NIR)

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


CamelBak

Ambush™

H.A.W.G ®

LPA-CK-60899

LPA-CK-60933

• • • •

Hydration Capacity: 102 oz (3.1 L) Cargo Volume: 189 cu in (3.1 L) Total Volume: 372.2 cu in (6.1 L) Includes 102 oz (3.1 L) OMEGA® Water Beast™ Reservoir with HydroLink Exit Port • Pack weight: 1.9 lbs (.9 kg) with empty reservoir • Pack dimensions: 410 mm x 250 mm x 140 mm

Optimizes the area on a user’s back with a wider platform, shorter torso length and reduced stack height. This is the perfect pack for shorter missions. Includes 102 oz (3.1 L) OMEGA® Water Beast™ Reservoir with HydroLink Exit Port Colour: AUC, Coyote, Foliage, MultiCam® meet US Military standards for Near Infrared Reflectance (NIR)

• • • •

Hydration Capacity: 100 oz (3 L) Cargo Volume: 1220.5 cu in (20 L) Total Volume: 1403 cu in (23 L) Includes the 100 oz (3 L) OMEGA® Water Beast™ reservoir with HydroLink™ Exit Port • Pack Weight: 2.75 lbs with empty reservoir

This pack is a favorite of the Navy SEALS. If it’s tough enough for them, it’s tough enough for anybody. Includes the 100 oz (3 L) OMEGA® Water Beast™ Reservoir with HydroLink™ Exit Port Air Director™ Back Panel for optimal load distribution and breathability, Independent Suspension harness moves with you, Noiseless zipper pulls throughout, glasses, goggles and NVG pocket with external access, Multiple drink tube exit ports for routing drink tube over the shoulder or under an arm, Lightweight, durable 500D Cordura® Fabric

TriZip™ LPA-CK-60894 • • • •

Hydration Capacity: 100 oz (3 L) Cargo Volume: 1891.6 cu in (31L) Total Volume: 2075 cu in (34 L) Includes the 100 oz (3 L) OMEGA® Water Beast™ Reservoir with HydroLink Exit Port • Pack Weight: 5.1 lbs (2.3 kg) • Pack Dimensions: 510 mm x 331 mm x 293 mm

Designed with adjustability and heavy loads in mind, the TriZip™ gives the user exactly what is needed for customization and comfort. Includes the 100 oz (3 L) OMEGA® Water Beast™ Reservoir with HydroLink Exit Port Fully adjustable patented Futura Harness by Mystery Ranch™, 500D Cordura®, Printed MOLLE webbing, External access side pockets, Lower drink tube exit ports for under arm tube routing. Colour: Army Universal Camo, Black, Coyote, Multicam

Colour: AUC, ABU, Coyote, Foliage (NIR) Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 58


CamelBak

ThermoBak® 3L

Sabre

LPA-CK-61492

LPA-CK-20322

• Hydration Capacity: 100 oz (3 L) • Total Volume: 183 cu in (3 L) • Includes the 100 oz (3 L) OMEGA® Water Beast™ reservoir with HydroLink Exit Port • Pack Weight: 1.5 lbs with empty reservoir • Pack Dimensions: 460 mm x 250 mm x 90 mm

The original product, continuously improved & upgraded, battle-tested by troops worldwide. Includes the 3L OMEGA® Water Beast™ Reservoir with HydroLink Exit Port. D-ring attachment points to add to loadbearing vest or ruck, Quick-release shoulder straps unclip to stow inside built-in pocket, NEW! Add/Remove nametags/unit badges with Velcro strips, 1000D Cordura®, External fill allows access to the reservoir zippers for easy access to the massive OMEGA external access port for easy filling, cleaning and adding ice Colour : Abu, Army Universal Camo, Black, Coyote, Desert Camo, Digital Desert, Digital Woodland, Foliage, Multicam, Nwu Page: 59

• Hydration Capacity: 70 oz (2 L) • Total Volume: 122 cu in (2 L) • Includes the 70 oz (2 L) OMEGA® Water Beast™ reservoir with HydroLink Exit Port • Pack Weight: 1.2 lbs (.54 kg) • Pack Dimensions: 445 mm x 270 mm x 80 mm

Tough, cost-effective and versatile—and made for the rigors of everyday use. Includes the 70 oz (2 L) OMEGA® Water Beast™ Reservoir with HydroLink Exit Port Additional Features: Tough, abrasionresistant Cordura® exterior, Includes HydroLink™ Modular Connection System with positive shut-off HydroLock™, External zip pocket holds your essentials, Closed cell insulation keeps water cool or warm for hours, SternumStrap™ for added stability, Quick-release shoulder straps unclip for easy removal

Stealth LPA-CK-76000

• Hydration Capacity: 72 oz (2.1 L) • Total Volume: 128 cu in (2.1 L) • Includes the 72 oz (2.1 L) Low-Profile OMEGA® Water Beast™ reservoir with HydroLink Exit Port • Pack Weight: 1.3 lbs (.6 kg) • Materials: • Pack Dimensions: 330 mm x 295 mm x 90 mm

With stealth, there’s always room for water - even in tight spaces or cramped environments. Includes the 72 oz (2.1 L) Low-Profile OMEGA® Water Beast™ Reservoir with HydroLink Exit Port Colour: Black

Colour: Black

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


CamelBak

Storm

Urban Assault XL™

LPA-CK-20311

LPA-CK-60893 :

• Hydration Capacity: 100 oz (3 L) • Total Volume: 183 cu in (3 L) • Includes the 100 oz (3 L) OMEGA® Water Beast™ reservoir with HydroLink Exit Port • Pack Weight: 1 lb (.45 kg) - empty reservoir • Pack Dimensions: 460 mm x 215 mm x 80 mm

Hydration just got even easier. Stick the Storm™ in your pack or clip it to your MOLLE. Additional Features: Closed cell insulation and neoprene tube cover keeps water cool or warm for hours, Use D-ring attachment points to place unit anywhere, Massive external OMEGA Access Port allows for quick and easy filling, cleaning and ice addition, Camelbak’s Chem Bio Reservoir 4.0 integrates easily when NBC conditions are a factor, Easy acces to In-Line MicroFilter (sold seperately), Integrated MOLLE/PAL attachment system Colour: Foliage Green

• • • •

Hydration Capacity: 70 oz (2 L) Cargo Volume: 2258 cu in (37 L) Total Volume: 2380 cu in (39 L) Includes the 70 oz (2 L)OMEGA® WaterBeast™ Reservoir • Pack Weight: 4.5 lbs (2.1 kg) • Materials: 840D and 1680D Ballistic Nylon > 420D High Density Nylon Oxford backpanel > 15mm Eva foam shoulder harness > 10 mm EVA foam on back panel > 5 mm EVA foam for padded laptop compartments > #8 YKK PU coated zipper > Nylon webbing

When size matters: Perfect for a quick overnight trip or to and from the office. Colour: Black

Urban Transport LPA-CK-90802

• Meets USSOCOM* requirements for simple and quick connection to the M53 mask • Direct connection to any AVON Protective Mask without the need for additional adapter • Patented HydroLink™ Quick Disconnect • Patented Big Bite™ Valve + Bite Valve Cover • HydroLock™ Valve turns water flow on/off with one easy motion • *This statement does not imply an endorsement by any DoD agency. Military Personnel are always encouraged to validate official approvals for use.

The CBR XA Reservoir eliminates the need for an adapter when using any AVON Protective Mask. DuraFlex Barrier™ Technology resists penetration of live chemical and biological warfare agents in addition to common toxic industrial chemicals and materials. CamelBak’s CBR X Reservoir is lightweight, durable, flexible and provides taste-free fluids on demand. Suitable for AVON products. Colour: Black, Coyote, ABU, AUC

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 60


CamelBak

Thermal Control Kit™ Tube Trap™ LPA-CK-90051 • • • •

LPA-CK-90021

Big Bite™ Valve mouthpiece Mouthpiece cover Insulated tube cover 42” delivery tube

• Control location of delivery tube • Can be installed on both back-mounted and waist-mounted hydration systems • Fits and 3/4” webbing

Converts any CamelBak system for extreme winter and summer conditions. Keeps your drink in your hose at a maintained temperature for longer .ie cold stays cold for longer and warm stays warm for longer. Colour: Black

The Tube Trap™ secures your drinking tube to 3/4-inch shoulder straps to keep it within close proximity. Fits both insulated and regular delivery tubes. Colour: Black

Flow Meter™ LPA-CK-90702

• Water guage: Measure how much water you drink, and how much is left in your reservoir • Programmable: Monitor personal hydration goals • Easy to Integrate with any CamelBak® Reservoir • Includes: Fluid Sensor, display, battery and installation and operating instructions.

Convert any CamelBak® reservoir into an intelligent hydration system with the CamelBak™ Flow Meter™. Colour: Grey

Page: 61

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


CamelBak

OMEGA® Water Beast LPA-CK-90352

The reservoir’s proven durability, OMEGA® wide mouth opening and rugged materials ensure the reliable delivery of water during extreme operational situations. Also includes Big Bite™ Valve and HydroGuard™ Technology. Features the patented Big Bite™ Valve made of medical grade silicone. Supplies unmatched water flow with ease. Wide OMEGA® fillport opening makes it easy to clean and fill. Includes HydroGuard™ Technology, which inhibits the growth of bacteria on reservoir and tube surfaces. Does not protect user from disease-causing organisms. Taste-free multi-layered Pure Flow™ drink tube has been proven by third party testers to keep water tasting fresh - no plastic taste. Colour: Black

O2011 CBR X Reservoir LPA-CK-90796 :

• Meets the U.S. Army’s stringent requirements for a Multi-Purpose Personal Hydration System • Patented HydroLink™ Quick Disconnect • Big Bite™ Valve plus Bite Valve Cover • HydroLock™ Valve turns water flow on/off with one easy motion • Durable reservoir and patented HydroLink™ modularity deliver the only CBRN-capable reservoir tough enough for everyday use, making a seamless transition between daily use, training and live agent environments.

CamelBak’s fifth generation Chem Bio Reservoir™ X (CBR X) with DuraFlex Barrier™ Technology resists penetration of live chemical and biological warfare agents in addition to common toxic industrial chemicals and materials. The CBR X Reservoir is lightweight, durable, flexible and provides taste-free fluids on demand. Colour: Black

2011 CBR X A LPA-CK-90802

• Meets USSOCOM* requirements for simple and quick connection to the M53 mask • Direct connection to any AVON Protective Mask without the need for an additional adapter • Patented HydroLink™ Quick Disconnect • Patented Big Bite™ Valve plus Bite Valve Cover • HydroLock™ Valve turns water flow on/off with one easy motion • *This statement does not imply an endorsement by any DoD agency. Military Personnel are always encouraged to validate official approvals for use.

The CBR XA Reservoir eliminates the need for an adapter when using any AVON Protective Mask. DuraFlex Barrier™ Technology resists penetration of live chemical and biological warfare agents in addition to common toxic industrial chemicals and materials. CamelBak’s CBR X Reservoir is lightweight, durable, flexible and provides taste-free fluids on demand. Colour: Black

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 62


CamelBak

Groove™ .6L

Groove™ Filters

LPA-CK-53287 • • • •

• •

LPA-CK-90772

Hydration Capacity: 20 oz (.6 L) 100% BPA-Free CamelBak® Got Your Bak Lifetime Guarantee™ Easy to refill and easy to use bottle with a filter built into the straw. Turn tap water into fresh, great-tasting water anywhere you go. Durable, BPA-Free, easy to carry and spill-proof. Flip & Sip: Sip with ease, flip shut for storage and no spills with the patented CamelBak Big Bite™ Valve. Dishwasher safe. (See cleaning tips for more information.)

• Replacement Filters for your Groove • Filters Water anywhere • 6 or 2 Packs available

Stock up on carbon filters for your CamelBak Groove™.

Field Cleaning Kit LPA-CK-60083

This compact field kit includes a sponge, tube brush, cleaning tablets for thorough cleaning and a durable carry pouch. Pouch can easily fit OMEGA® Reservoir Dryer (sold separately). Suitable for all Camelbak products.

Includes two plant-based carbon filters, for up to 60 gallons (or four months) of use. Size:

6 Pack, 2 Pack

Freshly filtered water. Anywhere. Filters as you sip, so you can hydrate on the go. Re-usable, BPA-Free, spill-proof bottle with a filter inside. Colour: Cool Blue, Blush, Seafoam, Graphite

Page: 63

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


CamelBak

Cold Weather

Friction Fighter™ NT

LPA-CK-CW05-08

NSN 8415-01-536-2419 LPA-CK-FF04-08

• 2-Year Warranty • Applications: For colder climate work, especially good for mechanic’s work • SNAP: Soft Neoprene Absorption Pad • Abrasion, water, perspiration-resistant palm • Extra grip and durability in palm and fingers • Digitally textured leather palm • Extra sensitivity for index finger; • Neoprene padding in thumb and knuckles • Lined with Thinsulate™ Bemberg; • Concealed interior seam stitching enhances durability especially around fingertips • Protects from abuse such as cold, abrasion and impact • Thinsulate™ is a registered trademark of 3M Corporation.

This lightweight insulated glove helps protect you from the elements without restricting your all-important trigger finger. Specialty Series: tough, durable with serious grip Colour: Black

• Approved for all Military Air Crews • Approved for Combat Vehicle Crewmen (CVC) by the US Army* • CTA 50-900 certified* • Sage Green is Team Soldier Certified • Application: Pilots and crew chiefs, fast roping, rappelling, hoist operations, handling weapons, tanks, gunnery • Mil-Spec N303 Nomex® fiber blend: 92% Nomex® (flame-retardant material), 5% Kevlar® (cut resistance) and 3% P140 antistatic fiber • FlexCut™ index finger design provides maximum dexterity and flexibility without material build-up in trigger • Nomex® Simplex knit construction

When Special Forces fast-rope in, they need combat-proven gloves with supreme finger dexterity. Flame Retardant Series: superior comfort and protection

Heat Grip CT™ LPA-CK-HGLG05-09

• Great for Shooting and extra grip tasks • Seamless palm design without lining • Smooth surface thumb and index finger for extra sensitivity and finger control • Lightweight & breathable; ideal for all climates • Supple, breathable, durable Clarino® synthetic leather palm provides firm grip • Two-way stretch spandex with 3% carbon conductive anti-static fiber provides snug fit • Concealed interior seam stitching enhances durability around vulnerable finger tips • Completely machine washable • Protects from abuse such as heat, cold, abrasion and impact

Whether you’re changing out a hot machine gun barrel or facing winter in Feyzabad, these gloves give you a firm grip and keep your flesh from melting or sticking. Specialty Series: tough, durable with serious grip Colour: Black, Desert Tan

Colour: Sage Green, Desert Tan Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 64


CamelBak

Hi-Tech Impact II CT™ LPA-CK-MP2LG05-09

• Padded palm and knuckles protect from impact, vibration and abrasion • Tacky fingertips increase sensitivity & control • Accordion knuckle construction with high density EVA foam flexes with movement • Lighweight & breathable; ideal for all climates • Supple, breathable, durable Clarino® synthetic leather palm provides firm grip • Two-way stretch spandex with 3% carbon conductive anti-static fiber provides snug fit • Concealed interior seam stitching enhances durability especially around fingertips • Completely machine washable • Protects from abuse such as heat, cold, abrasion and impact • Superb dexterity: an excellent mechanic’s glove and shooting glove • Protection from impact and vibration when using weapons of driving in rough conditions

The perfect blend of finger control and flexible accordion knuckle protection keeps you ready for action at any range. Colour: Black Page: 65

Magnum Force™ LPA-CK-MP3K05-08 • • • • • • • • • • • • •

Impact Series: soaks up vibration and impact Hard knuckle Kevlar® protection Abrasion-resistant palm reinforced Kevlar® Thermal Plasticized Rubber (TPR) finger guards flex with movement EVA foam padded index finger protects without interfering with mobility Tacky fingertips and thumb Supple, breathable, durable Clarino® synthetic leather palm provides firm grip Two-way stretch spandex with 3% carbon conductive anti-static fiber provides snug fit Two-way stretch Spandex with Carbon conductive anti-static fiber Stretch Kodra Clarino® synthetic leather Knuckle reinforced with Kevlar® EVA padding / TPR (Thermal Plastic Rubber) Hook-and-loop wrist closure / Polyester cord

Our most macho glove turns your fists into instruments capable of large-caliber destruction. Colour: Black

Impact CT™ NSN 8415-01-486-9482 LPA-CK-MPCT05-09

• Padded palm and knuckles protect from impact and vibration • Tacky fingertips increase sensitivity & control • Neoprene padded knuckles add extra flexibility with abrasion and impact resistance • Ideal for all climates • Supple, breathable, durable Clarino® synthetic leather palm provides firm grip • Two-way stretch spandex with 3% carbon conductive anti-static fiber provides snug fit • Concealed interior seam stitching enhances durability especially around fingertips • Completely machine washable • An excellent mechanic’s glove; also ideal for shooting or use with weapons with high vibration impact, and driving vehicles • Superb dexterity: an excellent shooting glove • Protection from impact and vibration when using weapons or driving in rough conditions

Form-fitting with ergonomic anti-vibration padding and maximum finger dexterity. Colour: Black

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


CamelBak

Max Grip NT

FR Magnum Force™ Long

LPA-CK-CW05-08 • • • •

• • • • •

• •

Approved for Aviation and Vehicle Crewmen NAVAIR Approved for USN and USMC CTA 50-900 Certified Mil-Spec N303 Nomex® fiber blend: 92% Nomex®, 5% Kevlar® and 3% P140 antistatic fiber FlexCut™ index finger design provides maximum dexterity and flexibility Nomex® Simplex knit construction - protects from flame, snags, runs and cuts Digitally textured leather palm, fingers and knuckles provide durability and a good grip Concealed interior seam stitching Over-water egress or SAR applications: gloves will not lose grip or fit when wet or submersed in water and will stay soft even with repeated exposure to salt water Reinforcements ergonomically placed in palm, thumb and fingers Combat-proven by Special Forces

This lightweight insulated glove helps protect you from the elements without restricting your all-important trigger finger.

LPA-CK-MFL06

• Flex Cut™ index finger design provides maximum dexterity and flexibility • Mil-Spec N303 Nomex® Fiber blend: 92% Nomex (fire retardant material), 5% Kevlar® fiber and 3% P140 anti-static fiber • Hard knuckle protection reinforced with Kevlar® is built into glove. • Long gauntlet for added FR protection • Accordion Panel conforms to hand • Concealed interior seam stitching using paraaramid thread enhances durability • Perspiration / moisture resistance: Tanning technology keeps leather soft and supple

The FR Magnum Force™ Long gives you an extra couple of inches over the standard Magnum Force™. Every little bit counts. Flame Retardant Series: superior comfort and protection Colour: Sage Green

Colour: Black Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 66


Crye Precision

Page: 67

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

Crye Precision designs & manufactures truly innovative equipment for elite fighting forces. Crye Precision are proud and honored to serve the customers’ needs. Crye Precision spend as much time as they can with users, continuously incorporating their experience and feedback into the gear. Crye Precision give them full support and are indebted to them for their service and their sacrifice. Crye Precision make uncompromising gear for uncompromising individuals. Crye Precision work hard to provide smart, high-performance, long-wearing gear for people who demand the best. All of Crye Precision gear is made in America from American materials. Every item is designed to help you perform better.

APPAREL

COMBAT APPAREL

The Crye Precision signature apparel sets the standard for operational wear with truly innovative performance enhancing features.

Combat Apparel is designed specifically for the demands of harsh operational environments. The Combat Apparel line incorporates several unique technologies. If imitation is any validation of a good idea, we’ve certainly developed a few winners with this series.

Clothing and accessories have been combat proven for the last 6 years by tier 1 units from across the world. Constant feedback is delivered on every aspect of the clothing to continuously hone the equipment in the fast changing theatres of combat. ARMOUR & EQUIPMENT Crye Precision armor and equipment products are designed to directly enhance the mobility, protection, and comfort of the wearer.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 68


Crye Precision

G3 Combat Pants LPA-CN-APR-CP4

• Unique low-profile waist adjust system • Each cargo pocket conceals water bottle/ magazine stabilizer • Dedicated knife/light holder that still allows pocket access • Simple kneepad height adjuster located in front thigh pocket • Designed for use with removable AirFlex™ Combat knee pads • Built-in flap covers kneecap opening when not using knee pads • Stretch diamond gusseted crotch • Rear-zip pockets • Larger expansion panel at lower back • Larger front thigh pockets • Double layer seat

Designed as a no-compromise assault uniform, these pants are aggressively cut for maximum mobility. These combat-proven pants are sized in 2-inch waist increments and multiple lengths for a perfect fit. Features a unique padded waistband and hi-mobility stretch panels at the knee and lower back. 10 pockets. Designed for use with our patented removable AirFlex™ Combat Knee Pads (sold separately). Base fabric is Mil-Spec 50/50 NYCO ripstop with durable 4-way stretch-woven panels. Zip fly with Velcro® closure. Unique lowprofile adjustable waist feature. Patented, other patents pending. Made in US from US materials. Size: 28”-46” Waist Length: Short, Regular, Long, XLong Colour: BLACK, MULTICAM, KHAKI 400, RANGER GREEN

Page: 69

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

G3 Combat Shirt LPA-CN-APR-CS4 • • • •

Comfort placket behind zipper Double layer bicep pocket New eye-pro holder and pen pocket Flexible Velcro® configuration on bicep pocket • Streamlined elbow pad configuration designed for use with our patented removable AirFlex™ Elbow Pads or our legacy Field Elbow Pads (sold separately)

The design that started a movement. When we developed the first version of our signature shirt, we had no idea that it would lead to such widespread adoption of our basic design. The G3 Combat Shirt™ is a combat-specific garment specifically designed to be worn under body armor. It keeps you cool with wicking, lightweight, high-performance, flame-resistant DRIFIRE® torso fabric and reinforced Mil-Spec 50/50 NYCO ripstop sleeves. Designed for use with our patented removable AirFlex™ Combat Elbow Pads or our legacy Field Elbow Pads (sold separately). The G3 Combat Shirt™ features a zip collar that allows easy donning and doffing while keeping slings, straps, and brass off your neck. Made in US from US materials. Patented, other patents pending. Size: XS, S, M, L, XL, 2XL, 3XL Length: Short, Regular, Long, XLong Colour: BLACK, MULTICAM, KHAKI 400, RANGER GREEN

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 70


Crye Precision

G3 Field Shirt LPA-CN-APR-FSE

• Double-layer bicep pocket with new eye-pro hanger and pen pockets • Flexible Velcro® configuration on bicep pocket • Designed for use with our patented removable AirFlex™ Elbow Pads or our legacy Field Elbow Pads (sold separately) • New dual-access NoProfile™ chest pocket design

This G3 Field Shirt™ is a traditionally tailored, general utility shirt featuring new NoProfile™ dual-entry chest pockets (top and side) for easier access while wearing body armor, a pen pocket on the left arm, and slanted, dual layer bicep pockets with new segmented Velcro® panels for reduced bulk. The bicep pockets include new eye-pro hanger feature. Shaped elbows are reinforced and accept our removable AirFlex™ Field Elbow Pads (sold separately). Fabric is Mil-Spec 50/50 NYCO ripstop. Made in US from US materials. Size: XS, S, M, L, XL, 2XL, 3XL Length: Short, Regular, Long, XLong Colour: BLACK, MULTICAM, KHAKI 400, RANGER GREEN

Page: 71

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

G3 Field Pants LPA-CN-APR-FPE

• Each cargo pocket conceals water bottle/ magazine stabilizer • Dedicated knife/light holder that still allows pocket access • Larger front thigh pockets • Designed for use with our patented removable AirFlex™ Field Knee Pads • Extended zip fly • No-snag button closure

Like the G3 Combat Pants™, the G3 Field Pants™ are sized with 2-inch waist increments for perfect fit without bulky hardware. Ten pockets located for easy access in the same configuration as the G3 Combat Pants™. Shaped knees are reinforced and accept our AirFlex™ Field knee pads (Sold Separatly) . Fabric is MilSpec 50/50 NYCO ripstop. Zip fly. Made in US from US materials. Size: 28”-46” Waist Length: Short, Regular, Long Colour: BLACK, MULTICAM, KHAKI 400, RANGER GREEN

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 72


Crye Precision

All Weather Combat Pants LPA-CN-APR-CPF

Crye Precision all weather pants are based on the same no-compromise design as the G3 Combat and Field Pants but built from a 4-way stretch woven fabric treated with NANO STX for extreme weather resistance. These combat-proven pants are sized in 2-inch waist increments and multiple lengths for a perfect fit. The trousers contain 10 pockets to easily stow magazines/ waterbottle and equipment easily. Designed for use with our patented removable AirFlex Combat and Field Knee Pads (Sold Seperatly). Zip fly with Velcro closure. Unique low-profile adjustable waist feature. Made in US from US materials. Unique low-profile waist adjust system. Each cargo pocket conceals water bottle / magazine stabalizer. Dedicated knife/ light holder that still retains pocket access. Simple kneepad height adjuster located in front thigh pocket. Designed for use with removable AirFlex Combat Knee Pads. Builtin flap covers kneecap opening when not using knee pads. Stretch diamond gusseted crotch. Rear zip pockets. Larger expansion panel at lower back. Larger front thigh pockets. Double seated rear. Size: 28�-46� Waist Length: Short, Regular, Long Colour: BLACK, MULTICAM, KHAKI 400, RANGER GREEN

Page: 73

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

All Weather Combat Shirt LPA-CN-APR-CSF

• Mid weight wicking FR torso • Extreme Weather resistant 4-way stretch NANO STX laminate with wicking knit interior face • Soft lined collar and zipper placket for added comfort • Flexible Velcro configuration on bicep pocket • Streamlined elbow pad configuration designed for use with our removable patented AirFlex Elbow Pads • Water shedding bicep pocket opening

The All Weather Combat Shirt is based on the same no-compromise design of the Crye Precision G3 Combat Shirt but built from a 4-way stretch woven laminate treated on the exterior with NANO STX for extreme weather resistance. The new All Weather Combat Shirt is designed to offer the versitility of the Crye Precision Combat Shirt architecture combined with the moisture and temprature managment features needed when operating across a wider temprature range. A wicking, midweight, high-performance flame resistant DRIFIRE knit torso and reinforced 4-way stretch laminate sleeves provide a warmer base than the standard Crye Precision Combat Shirts. Large easy access zip vents allow a massive amount of ventilation when needed. Designed for use with the Crye Precision removable AirFlex Elbow Pads (Sold Separately). The All Weather Combat Shirt features additional stretch woven upper back coverage for added weather protection and a zip collar that allows easy donning and doffing. Made in the US from US materials. Patented, other patents pending. Size: XS, S, M, L, XL, 2XL, 3XL Length: Short, Regular, Long Colour: BLACK, MULTICAM, KHAKI 400, RANGER GREEN Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 74


Crye Precision

G3 Range Vest LPA-CN-APR-RVA

• Integrated back and side ventilation • Designed to seamlessly integrate with the G3 Combat Shirt • New dual-access NoProfile chest pocket design

The G3 Range Vest is a simple low profile garment designed as a complement to the Crye Precision G3 Combat Shirt for situations when armour is not being worn. Simple and uncluttered design. Zip front, packs small fit into cargo pocket. Size: XS, S, M, L, XL, 2XL, 3XL Colour: BLACK, MULTICAM, KHAKI 400, RANGER GREEN

Page: 75

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

WindLiner LPA-CN-APR-WLD

• S towable hood • Folds and stores into single mesh-lined cargo pocket on sleeve • Stirrup thumb cuffs • Featherweight, high-performance NANO STX™ treated fabric • Elastic-bound hem • Drawcord hem • Soft-lined collar and zipper placket for added comfort

Extremely light and packable jacket that offers outstanding wind and weather resistance in a handy featherweight package. The WindLiner™ folds into its own single mesh-lined cargo pocket. Perfect for packing light and countering unpredictable weather conditions. Made in US from US materials. Size: S, M, L, XL, 2XL, 3XL Colour: MULTICAM, RANGER GREEN BLACK

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 76


Crye Precision

FieldShell LPA-CN-APR-FHI

• Unique, armor-friendly pit zips • Extreme weather resistant 4-way stretch NANO STX™laminate with wicking knit interior face • Soft-lined collar and zipper placket for added comfort • Versatile intermediate body length • Drawcord hem • Flexible Velcro® configuration on bicep pocket

The FieldShell™ is a versatile and refined soft shell jacket that offers significant utility in almost any weather. Our 4-way stretch laminate with NANO STX™ creates a highly breathable, lightweight, and extremely wind/rain resistant outer garment. Packability, clean lines, and refined features are the hallmarks of this garment. From the flat hidden-zipper front to the discreet zip mesh pockets that double as internal storage, this design remains uncluttered while still being multifunctional. Unique, armor-friendly pit zips allow easier access and more ventilation than traditional vents when wearing armor. Made in US from US materials. Size: XS, S, M, L, XL, 2XL, 3XL Colour: BLACK, MULTICAM, KHAKI 400, RANGER GREEN

Page: 77

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

Combat Elbow Pad LPA-CN-PAD-EC3

Lightweight 3-D molded foam pads with flexible impact caps insert into the Combat Shirt elbow pockets. Once installed, they stay put. Additional straps are included to help you tune to the desired fit. After extended use in the field, your elbows will thank you. Patented. Made in US from US materials. Sold in pairs. Colour: KHAKI, BLACK, RANGER GREEN

AirFlex Combat Knee Pad LPA-CN-PAD-KC3

• Weighs 0.34lbs per pair

The AirFlex™ Series represents the latest embodiment of our patented Combat Knee Pad™ design. Designed for compatibility with our uniforms and armor, these highly engineered technical garments are tailored for mobility and performance. The AirFlex™ Combat Knee Pad features a new flexible cap for complete freedom of movement. AirFlex™ Series pads are compatible with all current and legacy apparel that accepts our joint protection pads. AirFlex™ pads are so comfortable, light, and flexible you almost forget you are wearing them. Sold as a pair. Available in three colors. Made in US from US materials. Patented. Colour: KHAKI, BLACK, RANGER GREEN

AirFlex Field Elbow Pad LPA-CN-PAD-EF3

Lightweight 3-D molded foam pads insert into the Field Shirt sleeves. Extremely light and far more comfortable than flat foam pads. Made in US from US materials. Sold in pairs. Only available in Black. Colour: BLACK

AirFlex Field Knee Pad LPA-CN-PAD-KF3

• Weighs 0.12lbs per pair

Lightweight, flexible, and vented knee pads for all of our Field Pants™. Made in US from US materials. Only available in black. Patented. Colour: BLACK

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 78


Crye Precision

CAGE Armor Chassis LPA-CN-ARM-C49

CAGE (Crye Assault Gear) Armor Chassis™: Unlike any other armor vest, the CAGE Armor Chassis™ is the result of years of design and engineering. Made by an entirely new production process, the articulated Chassis provides the most comfortable and stable armor/loadcarriage platform to date. The design provides passive cooling via large air channels that run under the armor. Designed for use with our armored High Back BLAST Belt™, the CAGE Armor Chassis™ is fully modular and highly adjustable. Designed to be worn snug to the body like sports equipment. Features include: dual emergency doff, accepts 6x6” side plates and shoulder strap plates, front opening access, uninterrupted side coverage (no side seam), meets or exceeds IBA & USASOC frag and handgun requirements. Patented and Patents Pending. Made in US from US materials. Contact us for TERMS for ordering restrictions. CPC platebags are compatible with the Chassis™. If you want integrated pouches, choose the CPC platebags to complete your Chassis™. When selecting a platebag size that is different from the vest size, we strongly recommend only going up or down by one size to maintain proper fit and functionality.

NOTE: THIS SYSTEM IS DESIGNED FOR USE WITH STAND-ALONE CHEST AND BACK PLATES. IF YOUR PLATE REQUIRES A SOFT ARMOR BACKING, WE OFFER ADDITIONAL SOFT ARMOR BACKINGS TO BE INSERTED IN THE PLATEBAGS.

Page: 79

Weight: Small: 6.8 lbs. Medium: 8.0 lbs. Large: 9.3 lbs. Extra Large: 10.7 lbs. Size: S, M, L, XL Colour: MULTICAM, COYOTE, RANGER GREEN

NOTE: TO ALLOW FOR CUSTOM CONFIGURATION, PLATEBAG SETS ARE SOLD SEPARATELY AND SIZED INDEPENDENTLY FROM THE ARMOR CHASSIS™. MAKE SURE YOU ORDER A PLATEBAG SET TO COMPLETE YOUR KIT. ARMOR CHASSIS™ WITH PLATEBAGS WILL BE SHIPPED ASSEMBLED. Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

CAGE Plate Carrier (CPC) LPA-CN-CPC-001

The CAGE Plate Carrier™ (CPC™) offers unsurpassed comfort and load support in a low profile plate carrier configuration. It is releasable and accepts soft and hard armor inserts (sold separately). When paired with the Low Profile BLAST Belt™, it becomes an extremely efficient and versatile armor and load carriage system. Designed from the ground up to take full advantage of our revolutionary StKSS™ system that transfers the vest weight to the wearer’s hips. The CPC™ built-in cummerbund is designed to accept our soft armor panels and 6”x6” plates. CPC™ plate bags (sold separately) stretch to accommodate different plate thicknesses and have integrated magazine and admin pouches. NOTE: PLATEBAGS ARE SIZED INDEPENDENTLY AND MUST BE ORDERED INDEPENDENTLY OF THE REST OF THE CARRIER. MAKE SURE YOU ORDER A PLATEBAG SET TO COMPLETE YOUR KIT. CPC™ WITH PLATEBAGS WILL BE SHIPPED ASSEMBLED. Patented, other patents pending. Made in US from US materials. See TERMS for ordering restrictions.

Weight: Small: 3.8 lbs. Medium: 4.0 lbs. Large: 4.2 lbs. Extra Large: 4.6 lbs. Size: S, M, L, XL Colour: MULTICAM, COYOTE, RANGER GREEN

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 80


Crye Precision

Jumpable Plate Carrier (JPC) LPA-CN-BLC-042

The Jumpable Plate Carrier™ (JPC) is a lightweight and minimal vest designed for maximum mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC™ offers a variety of configuration options to suit an operator’s needs in terms of load carriage and comfort. It features our revolutionary new AirLite™ cummerbund system with our patent-pending integrated attachment system that allows pouches to be mounted on both the inside and outside of the cummerbund, shedding unnecessary weight and bulk while improving ventilation. It also features integrated admin and magazine pouches on the front of the carrier. Weight: Small: 1.2 lbs. Medium: 1.3 lbs. Large: 1.4 lbs. Extra Large: 1.5 lbs. Size: S, M, L, XL Colour: MULTICAM, COYOTE, RANGER GREEN

Page: 81

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

High Back BLAST Belt™ LPA-CN-ARM-B49

Combining the benefits of lower back support with flexible armor protection, the BLAST High Back Belt™ is an extremely stable and comfortable load carriage platform. It allows you to carry holsters, pouches, and thigh rigs securely and comfortably. It is designed to work in combination with the CAGE Armor Chassis™ or other operator-cut vests. Accepts rifle protective upgrade plates. Meets or exceeds IBA & USASOC frag and handgun requirements. Made in US from US materials. Weight: Small: 2.3 lbs. Medium 2.4 lbs. Large: 2.8 lbs. Extra Large: 3.0 lbs. Size: S, M, L, XL Colour: MULTICAM, COYOTE, RANGER GREEN

High Back Belt™ LPA-CN-BLC-849

Offering the same lumbar support and stable load carriage platform as our ballistic (BLAST) version but with a non-ballistic insert, the High Back Belt™ allows you to carry holsters, pouches, and thigh rigs securely and comfortably. It is designed to work in combination with the CAGE Armor Chassis™ or other operator-cut vests. Made in US from US materials. Non-ballistic. Weight: Small: 1.4 lbs. Medium: 1.5 lbs. Large: 1.7 lbs. Extra Large: 1.8 lbs. Size: S, M, L, XL Colour: MULTICAM, COYOTE, RANGER GREEN Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 82


Crye Precision

Low Profile BLAST Belt LPA-CN-ARM-B01

Similar to the original BLAST™ High Back Belt but cut in a lower profile, the new BLAST™ Low Profile Belt is also an extremely stable and comfortable load carriage platform. It is designed to work in combination with almost any armor vest. This belt is designed to integrate seamlessly with StKSS™, Removable soft armor insert exceeds IBA and USASOC frag and handgun requirements. Also accepts our rifle protective upgrade plates abd compatible with Crye Precision™ Suspenders. Weight: Small: 1.9 lbs. Medium: 2.2 lbs. Large: 2.8 lbs. Extra Large: 3.2 lbs Size: S, M, L, XL Colour: MULTICAM, COYOTE, RANGER GREEN

Low Profile Belt LPA-CN-BLC-B01

Offering the same lumbar support and stable load carriage platform as our ballistic (BLAST) version but with a nonballistic insert, the Low Profile Belt™ is designed to work in combination with almost any armor vest. This belt is designed to integrate seamlessly with StKSS™. Optional soft armor insert available & exceeds IBA and USASOC frag and handgun requirements. Also accepts our rifle protective upgrade plates. The Low Profile Belt™ is compatible with Crye Precision™ Suspenders. Non-ballistic. Weight: Small: 1.2 lbs. Medium: 1.4 lbs. Large: 1.8 lbs. Extra Large: 2.0 lbs. Size: S, M, L, XL Colour: MULTICAM, COYOTE, RANGER GREEN Page: 83

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

Suspenders LPA-CN-ACC-HC5

These low-profile suspenders provide a wide and even load distribution with very little bulk and hardware. These products shift the paradigm by providing unique and unmatched comfort, functionality, and performance. For use with our Low Profile and High Back belts. One size fits all. Made in US from US materials. Colour: COYOTE, RANGER GREEN

Soft Armour Insert for Blast Belt

Belt Side Sleeves LPA-CN-ACC-B4L

These sleeves slide over the sides of the High Back Belts offering a quick way to switch between set-ups. For instance, leave one holster mounted to one sleeve and another mounted to a separate sleeve. Now changing holster or pouch configurations doesn’ t have to involve “un-molle-ing” and “re-molle-ing” everything. Made in US from US materials. Colour: MULTICAM, COYOTE, RANGER GREEN Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 84


Crye Precision

Defender 500 Torso Plate

Defender 550 Torso Plate

Defender 250 Side Plate

The DEFENDER® 500 is a stand-alone NIJ Level IV (7.62 AP) plate. This plate provides single shot AP protection when used as stand-alone armor (no soft armor vest). DEFENDER® plates can also defeat multiple shots from lesser threats in stand-alone use.

The DEFENDER® 550 is a stand-alone NIJ Level IV (7.62 AP) plate. This plate provides single shot AP protection when used as stand-alone armor (no soft armor vest). DEFENDER® plates can also defeat multiple shots from lesser threats in stand-alone use.

The DEFENDER® 250 is a slim (0.4” thick) NIJ III+ rifle protective plate designed to be worn in conjunction with our soft armor products.

LPA-CN-PLT-P02

LPA-CN-PLT-P03

Weight: Small Size: 4.80 lbs. (2.18 kg) Medium Size: 5.55 lbs. (2.52 kg) Large Size: 6.35 lbs. (2.89 kg) X-Large Size: 7.20 lbs. (3.27 kg) Colour: BLACK

Page: 85

LPA-CN-PLT-P04

Weight: 1 lbs. Colour: BLACK

Weight: Small Size: 5.46 lbs. (2.48 kg) Medium Size: 6.27 lbs. (2.85 kg) Large Size: 7.19 lbs. (3.27 kg) X-Large Size: 8.17 lbs. (3.71 kg) Colour: BLACK

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

GunClip

LPA-CN-BLC-020 Introducing the GunClip™, an entirely new approach to carrying and deploying a handgun. Any light, any suppressor, any platform, any orientation, any situation. Even if you’re in a cramped vehicle or wearing an armored vest with a gun on your belt, the GunClip™ allows you to deploy your handgun and get on target. Fast. And its small size means minimal weight and space is taken up when not in use. A single adjustment sets rotation (360 degrees) and securely clamps the mount to almost any platform (belt or MOLLE). Fits belts up to 2 inches tall. Currently available for all GLOCK 17, 19, 22, and 23 pistols. Right hand mount. Other models available soon. Patents pending. Made in US from US materials. Colour: BLACK, TAN Size: One Size Fits Glock 17-23 Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 86


Crye Precision

Lap Panel

Shoulder Plate

The Crye Precision LAP Panel™ adds more soft armor coverage and load carriage area. It also incorporates two pockets for rifle protective upgrade plates. It is compatible with most military and commercial body armor vests currently in use. Meets or exceeds IBA & USASOC frag and handgun requirements. Made in US from US materials. Berry compliant.

The first Level 3+ rifle protective plate designed specifically to fully cover the shoulder and the exposed armhole region of most vests. This plate is dramatically shaped to accommodate the highly flexible nature of the shoulder joint and allow for maximum mobility. The plate connects directly to the Armor Chassis™... no straps to restrict the bicep. Pressure-molded padding provides additional comfort. Sold individually. Available in two sizes.

LPA-CN-ARM-UP9

Colour: MULTICAM, COYOTE, RANGER GREEN

LPA-CN-ARM-H21

Colour: MULTICAM, COYOTE, RANGER GREEN

Page: 87

CPC Side Soft Armor Insert LPA-CN-INS-D01

This soft armor panel adds side protection to the CPC™ and JPC™*. Sold individually. Exceeds IBA and USASOC frag and handgun requirements. Made in the US from US materials. *Compatible with JPC™ when equipped with optional side long armor pouch. Option Option

1: 6” x 10.5” @ 0.50 lbs. per panel (designed to fit SM/MD CPC™) 2: 6” x 11.5” @ 0.52 lbs. per panel (designed to fit LG/XL CPC™)

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

Platebag Soft Armor Insert LPA-CN-INS-P50

Soft armor panel for use with nonstandalone plates. Sold individually. Exceeds IBA and USASOC frag and handgun requirements. Made in US from US materials. Size: S, M, L, XL Colour: BLACK

Low Profile Belt Soft Armor Insert LPA-CN-INS-B01

Soft armor panel for our Low Profile Belt™. Exceeds IBA and USASOC frag and handgun requirements. Made in US from US materials. Size: S, M, L, XL Colour: BLACK

High Back Belt Soft Armor Insert LPA-CN-INS-B49

Soft armor panel for our High Back Belt™. Exceeds IBA and USASOC frag and handgun requirements. Made in US from US materials. Size: S, M, L, XL Colour: BLACK

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 88


Crye Precision

AirFrame Helmet LPA-CN-HLM-M01 • • • •

Revolutionary vented shell design for cooling Covers more of wearer’s nape than competitors Modular ear and face protection available Modular ARC-Rail™ system available O2 compatible) • Can be pre-drilled for desired NVG mount

The AirFrame™ ballistic helmet sets new standards in protection, comfort, and modularity. Complete AirFrame™ helmets weigh a full 20% less than complete ACH 2002 helmets while providing more coverage area. The AirFrame™ was developed with a mandate to dramatically reduce head-borne weight while exceeding the ACH frag threat. The AirFrame™ exceeds the ACH frag threat by an average of 20%. A complete medium AirFrame™ helmet weighs only 2.30 lbs., and the large weighs a mere 2.55 lbs. The AirFrame’s™ unique overlapping shell design creates an integrated vent that provides passive cooling and also reduces the damaging effects of explosive blast waves. Each AirFrame™ helmet features an OpsCore™ H-Nape Head-Loc™ retention system for unmatched stability, comfort, and ease of adjustment. Up armoring the AirFrame™ with ballistic ear or face protection is as simple and fast (see our EARS™ and CHOPS™ for more info). All helmets and components are compatible with common ear pro systems like Peltors™ and Sordins™. Colour: TAN Size: S, M, L, XL Weight: Medium: 2.30 lbs. Large: 2.55 lbs.

Page: 89

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

AirFrame Rails

AirFrame Ears

Based on the Ops-Core® ARC Rail™ Architecture, this system allows any number of accessories to be mounted to the helmet. It also provides an attachment for an 0xygen mask, NVG retention bungee cords, and cable management tie-downs. The Ops-Core® ARC Rail™ system used under license from Ops-Core® Inc.

Scalable and modular ear protection. Compatible with nearly all common ear-pro (Peltors/Sordins). Uses same attachment system as the Chops™. Exceeds ACH Fragmentation spec. One size fits all helmets.

LPA-CN-HLM-AEI

LPA-CN-HLM-ARI

*Includes removable NVG stabilizing bungee cords. Colour: TAN Size: ONE SIZE

AirFrame Rails™ are required for Ears™ installation. Colour: TAN Size: ONE SIZE

AirFrame Helmet Cover LPA-CN-ACE-HCS

This cover helps camouflage the helmet and provides points to attach items such as NVG battery packs, IR tape, strobes, etc. Finely tailored to avoid interfering with the helmet’s ventilation. Colour: MULTICAM Size: M, L

AirFrame Chops LPA-CN-HLM-ACI

• Allows proper sighting and firing of weapons • Eliminates blind spots inherent to traditional face protection • Able to be donned and doffed in seconds • Compatible with NVGs and most standard tactical goggles • Flexes to fit various face shapes • Provides fragmentation and blast/flame protection • Exceeds ACH fragmentation spec.

Easily attached and removed with one hand, the Chops™ offer mission-tailorable maxillofacial protection. The Chops™ provide simple lightweight ballistic protection that doesn’ t compromise communication, hydration, or situational awareness. Uses the same attachment system as the Ears™. One size fits all AirFrame™ helmets. AirFrame Rails™ are required for Chops™ installation. Colour: TAN Size: ONE SIZE

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 90


Crye Precision

POUCH Zip-On Panel

PACK Zip-On Panel

MOLLE Zip-On Panel

A dedicated pouch panel that zips to rear plate. Holds multiple 37/40mm grenades/ bangs across the top, a GP pouch in the middle, and MOLLE webbing on the bottom. Use few different panels for different types of work and switch quickly between them. Features a built-in hydration/bolt cutter pocket. Corresponds with platebag sizing. Compatible with Chassis™ and CPC™.

Simple, versatile pack that zips to rear plate and stretches to hold essential supplies. Several handy internal and external pockets. Streamlined design is not too big and not too small. Features a built-in expandable hydration/bolt cutter pocket. Corresponds with platebag sizing. Compatible with Chassis™ and CPC™..

A quick attach/detach system to set up dedicated load-outs. Zips to rear platebag. Rig up a few different panels for different types of work and switch quickly between them. Features a built-in hydration/bolt cutter pocket. Corresponds with platebag sizing. Compatible with Chassis™ and CPC™.

LPA-CN-BLC-ZP202

Colour: MULTICAM, COYOTE, RANGER GREEN Size: S, M, L, XL

Page: 91

LPA-CN-BLC-ZP102

Colour: MULTICAM, COYOTE, RANGER GREEN Size: S, M, L, XL

LPA-CN-BLC-ZPO

Colour: MULTICAM, COYOTE, RANGER GREEN Size: S, M, L, XL

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

StKSS Load System LPA-CN-BLC-028 • • • • • •

Extremely simple and lightweight Highly flexible and easy to use Very little impact on range of motion Does not limit vest’s emergency-release Available for all sizes of CPC™ and Chassis™ Kit includes two lengths for perfect fit

Nothing short of revolutionary. StKSS™ (Structural Kinetic Support System) is a system that allows a wearer to selectively transfer some or all of the weight of his armor load vest to his hips. StKSS™ allows the wearer’s shoulders and spinal column to be completely isolated from the weight being carried. Instead, the weight is transferred directly to the pelvis (hip bone) and legs. The effect is unmistakable, and the benefit is undeniable to those familiar with what wearing a 60+ lbs. vest for months on end does to your lower back. Patents pending. Made in the US from US Materials. Colour: MULTICAM, COYOTE, RANGER GREEN Size: S, M, L, XL Weight: 0.07 lbs. per piece (0.14 lbs. per pair)

Chassis StKSS Adapter LPA-CN-BLC-039

This adapter allows you to use the StKSS™ load support system on your Chassis™ and/ or BLAST High Back Belt™. Simply attach the adapters to the side of the Chassis and the belt and insert the appropriately sized StKSS™ (sold separately). Kit includes a pair of vest adapters and a pair of belt adapters. Colour: MULTICAM, COYOTE, RANGER GREEN Size: ONE SIZE Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 92


Crye Precision

MagClip

LPA-CN-MAGCLIP The MagClip provides new options for carrying and using magazines. Ideal for applications where low visibility, rapid access, or additional capacity is needed. Simply clip the magazine edge and grab when needed. The MagClip attaches directly to the magazine and remains on the magazine - no pouch necessary. Unique clip design allows many carry options: inside the waistband, on a belt, on MOLLE webbing, clipped inside a pack or case, inside a cummerbund, clipped to a vehicle door panel or unsure a seat. While not intended to replace all magazine pouches, the MagClip is great for a quickaccess mags, adding mags wherever you have space, low-vis missions, or just throwing a few magus on a belt to hit the range without kitting up. Compatible with most 5.56 magazine types including GI mags, Magpul PMAGS and HK mags. Other calibers available soon. Patents pending. Colour: BLACK

Page: 93

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

FASTMITS LPA-CN-FASTMITS

Fast Mits are a compact and lightweight alternative to dedicated fast rope gloves. Simply slide over tactical gloves before roping then shake hands to doff when you hit the ground. Allows immediate transition from rope to assault - no fumbling. FastMits are retained on wrist by bungee loops. Includes integrated hanger loop. Medium weight leather palm. Stretch woven back. Patents pending Colour: MULTICAM

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 94


Crye Precision

Side-Pull Mag Pouch

CPC Stretch Mag Pouch Roll-Up Dump Pouch LPA-CN-NLC-037

LPA-CN-BLC-034

A perfect way to carry and access two mags. Front carry is compatible with all vests that have front Velcro® flap. Rear carry is ideal for rear CPC™ platebag. Fits most 5.56 mags.

This ultralight pouch allows easy access to two magazines without taking up any MOLLE space. Can be mounted for bottom or top “pull”. Fits most 5.56 mags.

A lightweight roll-up dump pouch designed to Velcro® to the lower edge of any of our belts, CPCs, or Chassis. Also works great on a rear CPC platebag. Use is for anything that needs to be stowed quick. Rolls up and stores out of the way when not being used and doesn’ t take up any MOLLE room.

LPA-CN-BLC-035

Colour: MULTICAM, COYOTE, RANGER GREEN Size: ONE SIZE

Page: 95

Colour: MULTICAM, COYOTE, RANGER GREEN Size: ONE SIZE

Colour: MULTICAM, COYOTE, RANGER GREEN Size: ONE SIZE

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

Shooter’s Cap – Velcro

Shooter’s Cap – CP Logo

Our take on the classic ball cap, with some subtle differences. No metal rivet on top. The underside of the brim is a black Velcro™ receptive material which accepts our VisorLites™. This version features a Velcro™ loop panel on the front. Patent Pending. Made in US from US materials. Berry compliant

Our take on the classic ball cap, with some subtle differences. No metal rivet on top. The underside of the brim is a black Velcro™ receptive material which accepts our VisorLites™. This version features a CP logo on the front. Patent Pending. Made in US from US materials. Berry compliant

LPA-CN-APR-BC2

Colour: MULTICAM Size: ONE SIZE

LPA-CN-APR-TSH

Colour: MULTICAM Size: ONE SIZE

Shooter’s Cap – MLI LPA-CN-APR-BC7

Our take on the classic ball cap, with some subtle differences. No metal rivet on top. The underside of the brim is a black Velcro™ receptive material which accepts our VisorLites™. This version features an embroidered MLI™ logo on the front. Patent Pending. Made in US from US materials. Colour: BLACK Size: ONE SIZE

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 96


Crye Precision

GUNS KILL hippies Tee LPA-CN-APR-TGK

These shirts are all about peace, love, and understanding... that no one needs hippies. Colour: BLACK Size: S, M, L, XL

CP Logo Tee LPA-CN-APR-TCP

Crye Precision™ T-shirts make perfect field dressings, improvised dust masks, and function pretty good as birthday gifts too. They come in all sizes. Colour: BLACK, PRAIRIE DUST, DARK HEATHER Size: S, M, L, XL, XXL

MLI Mug

LPA-CN-ACC-MUI A fun Christmas gift for all (mug imported, printed in USA). Colour: BLACK, WHITE

BLEND IN Tee LPA-CN-APR-TMC53

Wear this one to your next mandatory cultural-diversity-sensitivity training session. Always sure to start friendly conversations. Available in black, white, and Army uniform tan. Colour: BLACK, WHITE, TAN Size: S, M, L, XL, XXL

MLI Tee

VisorLites

Wear this one to your next mandatory cultural-diversity-sensitivity training session. Always sure to start friendly conversations. Available in black, white, and Army uniform tan.

These tiny but bright LED lights come with a Velcro® hook surface and can be placed under the brim of our ball caps for a handsfree light right where you need it. A simple, lightweight, and convenient solution to one of life’s persistent problems. Patent Pending.

LPA-CN-APR-TSH

Colour: BLACK, WHITE, TAN Size: S, M, L, XL, XXL Page: 97

LPA-CN-ACC-VLI

Colour: RED, WHITE, BLUE

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Crye Precision

MLI Stickers LPA-CN-ACC-SK199

These high quality glossy stickers look good on almost anything... especially Apaches and A-10s. Available in two sizes. Size:

S, L

MLI™ Emblem LPA-CN-ACC-EM199

• Measures 4 1/2” wide by 2 5/8” tall • Shiny, long-lasting chrome finish • Paint-safe adhesive: emblem can be safely removed if desired

High-quality chrome-plated emblem with adhesive backing. Perfect for any vehicle... on land, sea, or air. Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 98


Magpul

Page: 99

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Magpul

Magpul was founded in 1999 with the intent of developing a simple device to aid in the manipulation of rifle magazines while reloading under stress. The company’s name comes from this original product called the Magpul. Over the last decade Magpul has continued to grow and develop using much the same mission and process with a focus on innovation, simplicity, and efficiency.

be gained from a bad concept or failed execution is virtually endless. Only by pushing the limits of design, materials, and manufacturing techniques through a process of trial and error do we find true innovation. That said, failure for its own sake is foolish, and it is important to learn as much as possible from existing failures so as not to attempt to reinvent the square. This is the meaning behind “fail smart.�

To understand Magpul, one must first understand the root ideas that form the foundation of our company culture and design philosophy. These core principles have allowed us to maintain a course true to our original mission, and help explain how and why we do the things we do. There is much to be learned from failure: product ideas, material properties, user interface issues, etc. The potential knowledge to

Ideas are the easy part.There is something to be said for great ideas, however, ideas are nothing more than dreams until they are realized in a form that is accessible to the marketplace. Magpul is known for its creative design solutions, and we are proud of our accomplishments in this arena not only because they are novel, but because we have successfully turned many of our dreams into reality.

Easy is hard, hard is easy. Unnecessary complexity and expensive construction are the hallmarks of mediocre design. It is almost always easier to design a product that is complicated, confusing, and expensive rather than simple, intuitive, and affordable. Although it is more difficult, Magpul has chosen to take the latter of these two approaches to product development. Mission dictates function, and function dictates design. Magpul builds for the real world, so every item is built to fill a particular mission, and is designed around a unique set of cost, performance, and timeline considerations. The styling of a product follows these mission-driven parameters, and ties the functional piece into a design that can be efficiently produced.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 100


Magpul

PMAG 30

PMAG 30 MAGLEVEL

LPA-ML-MAG211

• Impact & crush resistant polymer construction • Constant-curve internal geometry for smooth feeding • Anti-tilt, self-lubricating follower for increased reliability • Multi-use Impact/Dust Cover keeps dust and dirt out during storage and protects the feedlips from hard impact damage • USGI-spec stainless steel spring for corrosion resistance and field compatibility • Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly

The PMAG is a lightweight 5.56x45 NATO (.223 Remington) AR15/M16 compatible magazine. It features an advanced impact resistant polymer construction, a pop-off Impact/Dust Cover for storage, and an easy to disassemble design with a flared floorplate for positive magazine extraction from pouches. Platform: AR15/M16, 5.56x45 NATO Colour: Black, Flat Dark Earth, OD Green Foliage Page: 101

NSN: MAG210-BLK MAGAZINE CARTRIDGE 1005-01-576-5164 LPA-ML-MAG210 • • • •

Impact & crush resistant polymer construction Constant-curve internal geometry Anti-tilt, self-lubricating follower for reliability Multi-use Impact/Dust Cover keeps dust and dirt out during storage and protects the feedlips from hard impact damage • Black-oxide coated (MIL-DTL-13924D) USGIspec stainless steel spring • Transparent windows on both sides of the PMAG MagLevel along with a painted indicator on the spring • Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly

The PMAG MagLevel features transparent windows on both sides of the body and has a painted indicator on the spring for quick determination of approximate rounds remaining in the magazine. Platform: AR15/M16, 5.56x45 NATO Colour: Black, Flat Dark Earth, OD Green Foliage

EMAG 30 MAGLEVEL LPA-ML-MAG241 • • • •

Impact & crush resistant polymer construction Constant-curve internal geometry Anti-tilt, self-lubricating follower for reliability Multi-use Impact/Dust Cover keeps dust and dirt out during storage and protects the feedlips from hard impact damage • Black-oxide coated (MIL-DTL-13924D) USGIspec stainless steel spring • Transparent MagLevel windows on both sides • painted indicator on the spring

The EMAG (Export MAGazine) is a lightweight 30-round 5.56x45 NATO polymer magazine that features a number of aesthetic and functional changes from the original PMAG®. While EMAG remains 100% compatible with the AR15/M16 platform, its unique geometry is optimized for foreign-made weapons such as the HK 416, British SA-80, Beretta ARX-160, IMI Tavor, and others. Platform: AR15/M16, 5.56x45 NATO Colour: Black

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Magpul

PMAG 30G MAGLEVEL PMAG 20 LPA-ML-MAG234

LPA-ML-MAG217

The PMAG 30G MagLevel (5.56 NATO/.223 Remington) is a durable, lightweight, high reliability 30-round polymer magazine for the HK G36. The PMAG 30G MagLevel features a four way anti tilt follower, constant-curve internal geometry, slim-line body for enhanced pouch compatibility and Mag Level Round indicator windows to easily identify loaded round count. PMAG 30G utilises the same floor plate , lock plate and Milspec black oxide coated stainless steel spring as the original PMAG 30 to ensure durability and performance in all environments. Platform: AR15/M16, 5.56x45 NATO Colour: Black

• Impact & crush resistant polymer construction • Straight-bodied 20-round design maintains a low profile • Controlled-tilt, self-lubricating follower for increased reliability • Multi-use Impact/Dust Cover keeps dust and dirt out of the magazine during storage and protects the feedlips from potential hard impact damage during transit • High quality stainless steel spring for corrosion resistance • Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly

The PMAG 30G MagLevel (5.56 NATO/.223 Remington) is a durable, lightweight, high reliability 30-round polymer magazine for the HK G36. Platform: AR15/M16, 5.56x45 NATO Colour: Black, Flat Dark Earth, OD Green Foliage

PMAG 20LR LPA-ML-MAG243

• Impact & crush resistant polymer construction • Specially designed, self-lubricating follower • Controlled-tilt, self-lubricating follower for increased reliability • Multi-use Impact/Dust Cover • High quality stainless steel spring for corrosion resistance • Textured gripping surface and flared floorplate for positive magazine handling and easy disassembly

The 7.62x51 NATO (.308 Winchester) PMAG 20LR is a cost effective high reliability magazine for SR25/M110 pattern rifles* featuring true 20-round capacity, constantcurve body, and snap on Impact/Dust Cover. Designed specifically for military-issue MK11/M110 rifles and mil-spec ammunition (including M118LR), the PMAG 20LR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself. Platform: 7.62x51 NATO (.308 Winchester) Colour: Black

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 102


Magpul

PMAG RANGER

NSN: MAG020-BLK MAGAZINE KIT CARTRIDGE 1005-01-560-2100 LPA-ML-MAG212 The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG and EMAG™ that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.

5 Round Limiter™

10 Round Limiter™

The PMAG 5 Round Limiter installs in standard PMAG 20 bodies, reducing the magazine capacity to 5 rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.

The PMAG 10 Round Limiter installs in standard PMAG 20 bodies, reducing the magazine capacity to 10 rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.

LPA-ML-MAG238

Colour: Black

LPA-ML-MAG238

Colour: Black

Colour: Black, Flat Dark Earth, OD Green Foliage

Page: 103

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Magpul

MAGPUL 5.56MM / 7.62MM / 9MM NSN: MAG001-BLK LPA-ML-90640

When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide. Colour: Black, Flat Dark Earth, OD Green Foliage

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 104


Magpul

MBUS® - Magpul® Back-Up Sight Front GEN 2 LPA-ML-MAG247

• Impact resistant polymer construction provides light weight and resists operational abuse • Spring-loaded flip up sight easily activated from either side or by pressing the top • Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc. • Clamps to most any MIL-STD-1913 Picatinny/ STANAG 4694 railed hand guard and provides the same height-over-bore as standard A2 irons • Protective wings shield the spring-locking A2 front sight post • Reduced size for greater optics compatibility • Spring-locking front sight post holds consistent elevation

The new MBUS (Magpul Back-Up Sight) GEN 2 is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform. NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.

Weight: W/ hardware: 1.2 oz. Height: Above rail, stowed: ~0.51 in. Length: Stowed: 2.6 in. Length: Deployed: 1.5 in. Colour: Black, Flat Dark Earth, OD Green Foliage Page: 105

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Magpul

MOE® Carbine Stock - Mil-Spec Model - Commercial Model LPA-ML-MAG400

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below) • Premium chrome-silicon lock spring provides positive locking and long service life • Sloping cheek weld • Shielded release latch prevents snagging and accidental operation • Side mounting slots accept optional cheek risers for NON-AR15/M16 applications • Compatible with Magpul ASAP® and other receiver-mount sling attachments • Rubber Butt-Pad, 0.30” • E xtended Rubber Butt-Pad, 0.55” • E nhanced Rubber Butt-Pad, 0.70” • Cheek Risers (0.25”, 0.50”, 0.75” for NONAR15/M16 applications)

The Magpul MOE Stock – Mil-Spec Model is a drop-in replacement butt-stock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The extra-power lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure and maintains strength by resisting spring relaxation. The Mil-Spec Model includes a standard 0.30” rubber butt-pad. Weight: Stock: 0.50 lb. Weight: W/ Rec. Extension: 0.80 lb. Length, Stock: 6.90 in. LOP Adjustment Range: 3.25 in. LOP, M4 Collapsed: 10.70 in. LOP, M4 Extended: 13.95 in. Colour: Black, Flat Dark Earth, OD Green Foliage Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 106


Magpul

CTR® Carbine Stock - Mil-Spec Model - Commercial Model LPA-ML-MAG311

• Mounts on mil-spec sized carbine receiver extension tube (not included) • Supplemental friction lock minimizes accuracy robbing wobble* • Premium chrome-silicon lock spring provides positive locking and long service life • Sloping cheek weld combines a slim profile with user comfort • Shielded release latch prevents snagging and accidental operation • Side mounting slots accept optional cheek risers for NON-AR15/M16 applications • Compatible with Magpul ASAP® and other receiver-mount sling attachments

The Magpul CTR (Compact/Type Restricted) – Mil-Spec Model is a drop-in replacement butt stock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The extrapower lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure and maintains strength by resisting spring relaxation. The CTR also features a supplemental friction lock system that minimizes wobble* for enhanced weapon stability and accuracy. The Mil-Spec Model includes a standard 0.30” rubber butt-pad which provides shoulder purchase. Weight, Stock: 0.55 lb. Weight, w/ Rec. Extension: 0.86 lb. Length, Stock: 6.90 in. LOP Adjustment Range: 3.25 in. LOP, M4 Collapsed: 10.70 in. LOP, M4 Extended: 13.95 in. Colour: Black, Flat Dark Earth, OD Green Foliage Page: 107

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Magpul

ACS™ Carbine Stock - Mil-Spec Model - Commercial Model LPA-ML-MAG371

• Mounts on mil-spec sized carbine receiver extension tube (not included) • Supplemental friction lock minimizes accuracy robbing wobble* • Premium chrome-silicon lock spring provides positive locking and long service life • Sloping cheek weld • Shielded release latch prevents snagging • Replaceable 0.30” Rubber Butt-Pad • Compatible with Magpul ASAP® and other receiver-mount sling attachments • Metal strike plate • Two water-resistant battery storage tubes

The patent-pending Magpul ACS (Adaptable Carbine/Storage) – Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using milspec sized receiver extension tubes. A streamlined, anti-snag profile shields the release latch and the extra-power lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure by resisting spring relaxation. The ACS also features a supplemental friction lock system that minimizes wobble* for enhanced weapon stability and accuracy. Dual, rear accessible, water-resistant battery storage tubes and an integraled storage compartment in the butt provides multiple storage options. The ACS comes standard with a 0.30” thick rubber butt-pad. Weight, Stock: 0.89 lb. Weight, w/ Rec. Extension: 1.19 lb. Length, Stock: 7.95 in. LOP Adjustment Range: 3.25 in. LOP, M4 Collapsed: 11.75 in. LOP, M4 Extended: 15.00 in. Colour: Black, Flat Dark Earth, OD Green Foliage Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 108


Magpul

UBR Collapsible Stock ™

LPA-ML-MAG330

• Mounts on durable Entry Receiver Extension tube (included) to accomodate the common M4 carbine buffer and spring • 7-Position LOP adjustability with customizable preset system for fast access to preferred length • Multi-shell construction provides solid foundation and shields critical parts • Solid “fixed stock” lockup in all positions • Lock mechanism w/ integral impact buffer increases drop strength & shock resistance • Repositionable cheek piece accommodates users requiring extra eye-relief • Stout construction provides counterbalance weight for improved weapon balance • Sling Mounts

The Magpul UBR (Utility / Battle Rifle), U.S. Patent 6651371, is a fully-featured, adjustable butt stock for the AR15/M16. Unlike typical collapsing stocks, this modular design offers the stability of a fixed stock with consistent cheek weld in any position. Seven-position length-of-pull (LOP) adjustment is quickly executed with gross motor movement while the integral preset system allows direct access to a preferred position. A robust lock mechanism and multi-shell construction increase durability under severe impact conditions experienced during malfunction clearing and accommodates large-bore AR calibers with ease. The UBR also provides extra counterbalance weight to improve handling on full-length rifles and weapons with muzzle-heavy accessories or bull-barrels. Weight, Stock: 1.46 lb. Weight, w/ Entry Receiver Ext: 1.63 lb. Length, Stock: 8.00-11.36 in. LOP Adj.: 7-Position (0.56 in. / position) LOP Adjustment Range: 3.36 in. LOP, Collapsed (M4/M16): 11.10 in. LOP, Extended (M4/M16): 14.46 in. Colour: Black, Flat Dark Earth, OD Green Foliage Page: 109

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Magpul

PRS® PrecisionAdjustable Stock LPA-ML-MAG308

• Mounts to Rifle Receiver Extension tube without A2 Spacer (not included) • Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG • Black phosphate coated steel adjustment shafts • Bottom Picatinny-type rail cover for monopod • Front/Rear - 1.25” sling loop (left-right r)

The Magpul PRS (Precision Rifle/Sniper) – AR15/M16 Model is a drop-in, precisionadjustable butt stock for rifles with A1/ A2 fixed stocks. Designed to offer the fine-tuned, customized feel of a precision target stock, the PRS is adjustable for both cheek riser height and length-of-pull without sacrificing the durability necessary to withstand the operational environment. The PRS can shorten the LOP by 0.25” or extend it by 0.75”. Machined aluminum adjustment knobs feature positive-locking click detents to maintain position under recoil and allows easy, tool-less adjustments by simply rotating the knobs. Machined aluminum butt-plate and alloy steel adjustment shaft provide stability and strength. Rubber buttpad offers positive shoulder purchase for optimal accuracy even with body armor. Base Picatinny-type rail allows for monopod use, additional sling mounts or storage. Stock includes all mounting hardware for A1/A2 type rifles with fixed stock. Weight, Stock: 1.68 lb. Weight, w/ Rifle Rcvr Extension: 1.90 lb. Length, Stock: 10.45-11.45 in. LOP Adj.: ~39 Clicks (0.026 in. / click) LOP Adjustment Range: 1.00 in. LOP, Min: 13.3 in. LOP, Max: 14.3 in. Cheek Height Adj.: ~29 Clicks Cheek Height Adj. Range: 0.75 in. Colour: Black, Flat Dark Earth, OD Green Foliage Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Versions Available: AR15/M16 (5.56x45) Model AR10/SR25 (7.62x51) Model Page: 110


Magpul

PRS2™ Precision Adjustable Stock - G3 Model LPA-ML-MAG340

• Mounts to HK G3/91 rifles with a factory fixed-stock steel backplate and standard buffer (not included) • Rubber butt-pad with solid aluminum buttplate core withstands severe impact & recoil • Bottom threaded inserts for custom sling, rail, or monopod mounting (10-32 threaded) • Mid - QD Sling Mount Plate accommodates up to 1.5” push-button swivels (left-right rv) • Rear - 1.50” sling loop (left-right reversible)

The Magpul PRS2 (Precision Rifle/Sniper) – G3 Model is a drop-in, precision-adjustable butt stock especially designed for the HK G3/91 rifle and its variants. The PRS2 is adjustable for both cheek riser height & length-of-pull without sacrificing the durability necessary. Compared to common plastic fixed stocks, the PRS2 has a similar minimum LOP but can extend up to 1.25” longer. Machined aluminum adjustment knobs feature positive-locking click detents to maintain position under recoil and allows easy, tool-less adjustments by simply rotating the knobs. Machined aluminum butt-plate and alloy steel adjustment shafts provide stability and strength. Rubber butt-pad offers positive shoulder purchase even with body armor. Stronger and heavier than most OEM stocks, the PRS2 ballances normally nose-heavy G3/91 rifles. Weight: 1.93 lb. Length, Stock: 9.38-10.63” LOP Adj.: ~ 49 Clicks (0.026 in./click) LOP Adjustment Range: ~ 1.25” LOP, Min: 15.00” LOP, Max: 16.25” Cheek Height Adjustment: ~ 87 Cheek Height Adjustment Range: ~ 1.82” Fore/Aft Cheek Weld Adjustment: 0.65” Colour: Black Page: 111

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Magpul

ACS™ QD Swivel Sling Mount

UBR™ QD Swivel Sling Mount

The ACS QD Swivel Mount can be added to the right or left side of the stock for use with push-button sling swivels. Heavy-duty black phosphatized steel construction easily installs with provided hardware. Swivels not included.

While the UBR comes with two push-button QD swivel sockets on the left side of the stock, the UBR QD Swivel Mount can be added to the right side (either front or rear) to add additional push-button sling swivels. Heavy-duty black phosphatized steel construction easily installs with stock’s original hardware. Swivels not included.

LPA-ML-MAG332

LPA-ML-MAG335

NOTE: Many makes of push-button QD swivels will make some contact with the ACS’s battery tubes. This is considered normal and acts as a ‘limited-rotation’ feature. The ACS QD Swivel Mount is NOT compatible with the UBR Stock.

NOTE: The UBR QD Swivel Mount is NOT compatible with the ACS Stock. Colour: Black

Colour: Black

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 112


Magpul

MIAD GRIP AR15/M16 GRIP CORE CR123 LPA-ML-MAG050 BATTERY STORAGE • Removable and replaceable front & rear panels for custom fit over multiple hand sizes • Improved ergonomics and positive anti-slip texture on both sides and rear back-strap • Removable inner core that allows for storage • Custom storage of batteries (waterproof) or spare bolt/firing pin with optional cores • Kit includes 3 size back-straps, 2 front-straps, 3-round core plug & installation hardware

The MIAD (MIssion ADaptable) Grip is a drop-in replacement for the standard AR15/ M16/M4 pistol grip, designed to improve weapon ergonomics. Interchangeable front & rear straps, as well as a range of storage core options allow the end user to adjust the grip for hand size. All mounting hardware is included.

LPA-ML-MAG055

GRIP CORE AA/AAA BATTERY STORAGE LPA-ML-MAG056

Internal core unit for either the MIAD or MOE grips designed to hold two (2) CR123A lithium type batteries in a self contained waterproof unit.

Internal core unit for either the MIAD or MOE grips designed to hold two (2) AA type batteries in a self contained waterproof unit.

Rubber cap is captured to the unit and can be opened with a push of the thumb.

Included internal spacer provides rattle free storage of either (2) AAA or (2) N size batteries (commonly used for EOTech sights).

Colour: Black, Flat Dark Earth, OD Green Foliage

Rubber cap has two sides with marking to identify “spent” batteries and can be opened with a push of the thumb. Colour: Black, Flat Dark Earth, OD Green Foliage

NOTE: Integral trigger guard is no longer available.NOTE: For proper operation with 7.62 NATO AR10/SR25 style of rifles, the MIAD Grip Wedge is recommended. Colour: Black, Flat Dark Earth, OD Green Foliage Page: 113

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Magpul

GRIP CORE BOLT & GRIP CORE MIAD FIRING PIN STORAGE ARID/SR25 WEDGE LPA-ML-MAG057

LPA-ML-MAG055

Internal core unit for either the MIAD or MOE grips designed to hold one (1) standard AR15/M16 complete bolt and firing pin. Colour: Black, Flat Dark Earth, OD Green Foliage

• F its most 7.62 NATO AR-type applications • Provides streamlined appearance for B2 and B3 back-strap configurations • Made from a durable, black thermoplastic elastomer • NOT compatible with Magpul MOE® grips

The MIAD Grip Wedge is designed to supplement the Magpul MIAD grip system for AR10/SR25 7.62 NATO type applications. Flexible thermoplastic elastomer construction provides the proper rear take-down pin detent spring support and conforms to the larger receiver geometry of these weapons for a streamlined appearance.

MOE® Grip AR15/M16 LPA-ML-MAG057

The MOE grip provides Magpul quality, feel, and durability in an economical, drop-in upgrade for the standard AR15/ M16/M4 pistol grip. The ergonomic, hand filling design combines aggressive texturing with storage core capability. With a similar shape to a ‘medium’ sized MIAD, the onepiece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional storage cores for gear stowage and includes a basic grip cap. All mounting hardware included. NOTE: Will NOT provide proper function with 7.62 NATO AR10/SR25 style of rifles. Colour: Black, Flat Dark Earth, OD Green Foliage

Colour: Black, Flat Dark Earth, OD Green Foliage

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 114


Magpul

MOE Hand Guards LPA-ML-MAG418/419

The Magpul MOE Hand Guard for AR15/ M16 rifles with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility. Slots at the two, six, and ten o’clock positions allow for optional mounting of Picatinny rail sections. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly. NOTE: Carbine-Length is a direct replacement for existing M4 carbine type handguards and utilizes the existing front hand guard retaining cap and delta ring. Variants: Carbine, Mid, Rifle Weight: 6.85 oz. Length, overall: 7.12 in. Length, mounting: 6.56 in. Height, excluding lip: 2.45 in. Width, max: 2.22 in. Colour: Black, Flat Dark Earth, OD Green Foliage Page: 115

XTM Rail Panels

MOE Polymer Rail Section

The low-profile XTM Rail Panels are a two-piece design that attach anywhere on a 1913 Picatinny rail without having to remove previously-mounted accessories. The combination of design and material used in the XTM Panels ensures they will remain securely in place under all operating conditions, but may be easily removed using the tips of two rounds when necessary.

Designed for use with MOE Hand Guards and many standard plastic hand guards, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to integral mounting slots on MOE Hand Guards is included.

LPA-ML-MAG410

Each set comes with (4) two-piece panels which will cover ONE side of a carbine rail. Colour: Black, Flat Dark Earth, OD Green Foliage

®

LPA-ML-MAG406-409

Size L2 (5 Slots), max overall length of 2.5”. Mounting screw center-to-center of 1.2”. Variants: 5/7/9/11 Slots Colour: Black, Flat Dark Earth, OD Green Foliage

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Magpul

RSA Rail Sling Attachment ™

LPA-ML-MAG502

• All cast steel construction • Mil-spec black manganese phosphate finish • Works on any standard 1913 Picatinny-spec rail

The RSA provides a forward sling attachment point for the Magpul MS2 or MS3 and other clip-in systems. Made from precision cast black manganese phosphatized steel, the RSA attaches to any MIL-STD-1913 Picatinny/STANAG 4694 rail. The RSA has been proven to withstand stress tests of over 300 pounds yet weighs a mere 1.3 ounces. Colour: Black

ASAP Ambidextrous MS2 - Multi Mission Sling Attachment Point Sling System ®

LPA-ML-MAG411

The Attachment Point allows a range of motion greater than 180 degrees, enabling true ambidextrous weapon manipulation for both left and right handed shooters. The ASAP replaces the standard AR15/M16 carbine stock receiver end plate, providing a tactical advantage by minimizing snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP works with Single-Point® type slings with snap hook style attachments such as the Magpul MS2 Sling. Made from precision cast black manganese phosphatized steel, the ASAP is compatible with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes). The ASAP has been proven to over 300lbs. NOTE: The ASAP is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock Colour: Black, Flat Dark Earth, OD Green Foliage

LPA-ML-MAG501

• Fast transition Single to dual-point • Adjustment Loop for rapidly adding or removing sling tension with a single-hand • Quick-detach lanyard • REAR - Works with Magpul ASAP® Compatible with most snap-hook style connectors. • FRONT - Compatible with most full sling swivels/loops for two-point use.

Driven by operational experience, the MS2 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS2 allows an operator to leverage the maneuverability of SinglePoint® attachment for direct-action, or two-point attachment for stability. Singlehand adjustments, quick-detach lanyard and positive-locking metal hardware provide flexibility. Colour: Black, Flat Dark Earth, OD Green Foliage

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 116


Magpul

B.A.D. Lever® Battery Assist Device AR15/M16 LPA-ML-MAG980

Developed from the operational experience of the Magpul DynamicsSM team, the B.A.D. Lever (Battery Assist Device) is designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch. The B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger. Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. All mounting hardware included.

MOE® Trigger Guard, Polymer – AR15/M16

SSG Selector Set FN SCAR

The MOE Trigger Guard is an enhanced polymer drop in replacement for the AR15/ M16 weapons platform. It features a shallow “V” shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying “gap” at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardware included.

The Magpul SSG Selector Set are drop-in, dual sided selectors for the FN SCAR family of weapons. Designed at the request of a deploying military unit who wanted more positive control of the selector, the SSG are compatible with military-issue select fire MK16 & MK17 weapons, as well as the civilian semi-automatic SCAR 16S & 17S rifles. The SSG are direct replacements for the OEM selectors, and require no permanent modification to the weapon system. Simple install utilizing existing set screw (not supplied).

LPA-ML-MAG417

Colour: Black, Flat Dark Earth, OD Green Foliage

LPA-ML-MAG417

Colour: Black

Colour: Black

Page: 117

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Magpul

Field Case iPhone 3G/3GS

Executive Field Case iPhone 4

The Magpul Field Case for the iPhone 3G and 3GS* is a semi-rigid cover designed to provide basic protection in the field.

The Magpul Executive Field Case for the iPhone 4* is a semi-rigid cover designed to provide basic protection in the field.

Made from the same synthetic rubber as the original Magpul loop, the Field Case features PMAG-style ribs for added grip, snap-on design for easy installation and removal, and slides easily in and out of pockets without snagging.

Made from the same synthetic rubber as the original Magpul loop, the Executive Field Case features a slim and unobtrusive design, PMAG-style ribs on the sides for added grip, snap-on design for easy installation and removal, and slides easily in and out of pockets without snagging.

LPA-ML-MAG449

LPA-ML-MAG450

NOTE: The Field Case in not compatible with the iPod Touch Colour: Black, Flat Dark Earth, OD Green Foliage, Orange, Pink

Colour: Black, Flat Dark Earth, OD Green Foliage, Orange, Pink

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 118


Mammut

Page: 119

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Mammut

Kaspar Tanner laid the foundations of the company in 1862 with the establishment of his traditional ropeworks in Dintikon near Lenzburg. The Mammut Sports Group AG is now an innovative company which develops, manufactures and sells mountaineering, outdoor pursuits and snow sports products. In addition to its central headquarters in Seon, Switzerland (since 1992), where around 230 people work, the Mammut group has branches and subsidiaries all over the world. An extensive network of agents handle global distribution. From traditional ropeworks to a modern, advanced company for the development, manufacture and sale of ropes, netting, belts and equipment for mountaineering and outdoor pursuits. The ropes are still produced exclusively in Seon; as ever, “Made in Switzerland” is a guarantee of quality and reliability. As well as its long-standing tradition in the manufacture of ropes, decades of

experience and the in-depth knowledge of specialists in the areas of clothing, sleeping bags, shoes and accessories, Mammut also relies to a great extent on feedback from numerous sportsmen and women, who regularly use, test and participate in the development of Mammut Sports Group equipment. The success of recent years has been based not only on products optimally suited to the target market, but also on excellent commercial relations with the specialist trade, with extensive customer service. A not insignificant contribution to the firm’s success is made by the increasing emphasis on marketing activities, such as advertising campaigns, carefully designed catalogues and the many years’ cooperation with active, well-known mountaineers and related organisations. When it comes to marketing, once again Mammut explores new paths. Following the successful viral campaign featuring 80-year old Mary Woodbridge who wanted to climb

Mount Everest, the 2008 campaign revolved around the test event. With a series of eyecatching images in Mammut advertising, such as a sleep laboratory at 2,700 metres, a line of 200 people on the Eiger glacier or 30 mountain guides on the “kleines Kamel” on the Furka Pass. The individuals who appear in these images apply to take part on the website www.mammut.ch/basecamp and are enlisted by the Swiss mountain sports equipment company for a complete test weekend and photo shoot. This is how a small, traditional family business developed to become a modern, innovative company, numbered among the major players in its sector. With around 300 employees, subsidiary companies in Germany, Norway, Japan and the USA, and a worldwide sales network and infrastructure that have seen substantial investment in recent years, Mammut Sports Group AG is well equipped to ascend to even greater heights.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 120


Mammut

Tanana Jacket Men LPA-MT-1010-09760 • • • •

Comfortable, elastic Soft Shell fabric Wind-repellent and soft material 2 zip pockets With membrane

Good value for money soft shell developed for the mountains and everyday wear.

Ultimate Pro Jacket LPA-MT-1010-06121

• Enhanced GORE® WINDSTOPPER® material very strong backing: wind resistant and breathable • Articulated elbows • Thumb loops • Highly elastic • Individually adjustable collar • With membrane

Optimally suitable for Via Ferrata, Backpacking

Optimally suitable for Via Ferrata, Sportsclimbing, Mountain Hiking

Suitable for Walking, Basecamp, Mountain Hiking

Suitable for Multipitch Rockclimbing, Backpacking

Size : S - XXL Weight: 540g Fabric : 85% Polyester 15% Polyurethan Colour: Hydro, Black, Prune, Salsa

Classic design, anatomically cut GORETEX® WINDSTOPPER® Soft Shell jacket for mountain sports and backpacking now made from an even harder wearing material. Size : S - 4XL Weight: 440g Fabric : GORE® WINDSTOPPER® Colour: Spinach-black, Salsa, Fire, Cyan, Chocolate, Graphite-black,HBlack

Page: 121

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Mammut

Albaron Jacket Men LPA-MT-1010-08221

• Technical and light weather protection jacket • Reliable protection in high alpine terrain • New hood design, can be adjusted vertically and horizontally, helmet-compatible • 2 large front pockets with 2-way zips • Underarm ventilation, spray-proof 2-way zip • Drawcord hem, adjustable using one hand • Shoulder print • Adjustable hem • Pre-shaped sleeves with Velcro cuffs • Sprayproof YKK zippers

Optimally suitable for Expeditions, Backpacking, Classical Alpinism Suitable for Skitouring / Backcountry Skiing, Multipitch Rockclimbing, Via Ferrata, Mountain Hiking, Mixed- and Iceclimbing Size : S-XXL Weight 440g Fabric : GORE-TEX® Pro Shell® 3-Layer Colour: Holly-bud green, Black, Cayenne-salsa, Azure-hydro

Ayako Jacket LPA-MT-1010-09570 • • • • • • • •

Zip-off hood, stows in the collar 1 inner pocket Pre-shaped sleeves with Velcro cuffs Net lining Underarm zip for additional ventilation Drawcord hem, adjustable using one hand Zip-in system for liner jacket GORE-TEX® 28,000 mm water column

Elias Jacket LPA-MT-1010-09470 • • • • •

Comfortable, elastic Soft Shell fabric Elastic drawcord cuff Glued details 2 hand pockets with zip Without membrane

Soft shell made from very breathable and soft material - ideal for warmer climates.

Optimally suitable for Walking, Mountain Hiking, Backpacking

Optimally suitable for Via Ferrata, Backpacking, Approach

Suitable for Basecamp

Suitable for Walking, Basecamp, Mountain Hiking

Size : S-4XL Weight: 730g Fabric : GORE-TEX® Pro Shell® 2-Layer Colour: Azure-hydro, Black, Holly-bud green

Size : S-XXL Weight 430g Fabric : 90% Polyamid (Nylon), 10% Elastan, (SOFtech™) Colour: Black, Azure, Salsa, Bud Green

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 122


Mammut

Longsleeve All-Year

Kala Pattar Pull

LPA-MT-1050-00020

LPA-MT-1040-00740

• 1 chest pocket • Durable and fast-drying outside • Soft and warm inside

Comfortable fleece pullover with waffle backing for ideal heat management in a variety of activities. The flatlock seams give it technical and modern look. Optimally suitable for Multipitch Rockclimbing, Mountain Hiking, Backpacking Suitable for Walking, Sportsclimbing, Alpine Skiing, Approach

Size : S-XXL Weight: 315g Fabric : 100% Polyester (Toray Fieldsensor) Colour: Woobine, Hydro, Chilli, Black, Cayenne, Honey, Cyan, Holly

Page: 123

• Contoured cut • Uncompromising combination of high-end functionality and youthful design • Polyester microfiber for efficient wicking • Lightweight quality: merino wool and polyester mix for optimal temperature balance • Midweight quality: merino wool and polyester mix with waffle backing structure for optimal insulation on rapidly cooling parts of the body • Antimicrobial to avoid unpleasant odor

Summit Longsleeve LPA-MT-1041-02780

• 65% polyester 35% cotton ripstop • Teflon treated for stain resistance • Cargo pockets with built-in Back-up Belt System can carry additional AR magazines or other gear • Self-adjusting comfort-waist has no irritating metal buckles • Triple-stitching and 40-plus bartacks in highstress areas • Imported

Optimally suitable for Skitouring / Backcountry Skiing, Backpacking, Classical Alpinism

Optimally suitable for Sports climbing, Nordic Walking, Trail Running

Suitable for Multipitch Rockclimbing, Via Ferrata, Mountain Hiking

Suitable for Walking, Gym Climbing, Bouldering / Urban Climbing

Size : XS – XXL Weight: 210g Fabric : Polyester Microfiber, Merino Wool Colour: Graphite black, Endurance-berry, Blue, White

Size : S-XXL Weight: 225g Fabric : 91% Polyamid 9% Elasthan Tactel Colour: Oasis-woodbine, Black, Endurance-frost, Hydro-midnight, Fire-frost, Frost-white, Cyan-saphire, Holly-bud green

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Mammut

Logo-Shirt

Glacier Pants LPA-MT-1020-05450

LPA-MT-1041-02572

• bioRe® Organic Cotton • Ultraviolet Protection Factor (UPF) 40+

The famous Mammut logo T-shirt, now available in bioRe® organic cotton. bioRe® stands for: 1. Organic: produced according to organic criteria; 2. Quality: high-quality materials and workmanship; 3. Ecological: no use of harmful substances or heavy metals; 4. Transparency: control over all production stages 5. Fairness: humane production conditions throughout the entire value chain Optimally suitable for Sportsclimbing, Gym Climbing, Bouldering / Urban Climbing Suitable for Multipitch Rockclimbing, Walking, Via Ferrata, Travel, Mountain Hiking Size : 4XS - 4XL Weight: 210g Fabric : 100% Organic Cotton bioRe® Colours: Fire, Hydro, White, Cedar, Lime

• ColdBlack™ makes dark colors behave almost like light colors, and absorbs up to 80% of the sunlight • Durable and fast-drying outside, soft and warm inside • Edge and crampon protection with robust reinforcement material • Reinforced and articulated knees • 3 zip pockets, 1 leg pocket • Regular Fit • Ultraviolet Protection Factor (UPF) 50+

Optimally suitable for Mountain Hiking, Backpacking, Classical Alpinism Suitable for Multipitch Rockclimbing, Basecamp, Winterhiking / Snowshoeing, Approach

Packaway Pants LPA-MT-1020-03470

• Reflective prints improve visibility in low light • 2 front zip pockets • Side leg zips up to the hips so you can put them on over shoes • Adjustable hem with Velcro • Adjustable waist cord • Regular Fit

Optimally suitable for Backpacking, Classical Alpinism Suitable for Skitouring / Backcountry Skiing, Basecamp, Backpacking, Winterhiking / Snowshoeing, Mixed- and Iceclimbing Size : XS-4XL Weight: 300g Fabric : DRYtech[TM] 2.5-Layer Colour: Black

Size : 44-58 Waist Weight: 490g Fabric : schoeller®-dryskin extreme NanoSphere® Colour: Black

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 124


Oakley Standard Issue

Page: 125

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue

In 1975, a technology company looked at a product and saw an opportunity. The result was an innovation, a motocross handgrip with a unique orbicular design. The company was Oakley. It began a legacy of seeking out problems and solving them in ways that redefine product categories. This discipline requires an unyielding drive to defy convention and invent a better solution. It is based on three fundamentals: Find opportunity. Solve with technology. Wrap in art. Oakley Government Sales has been selling Oakley to the military for over 20 years. Over time, Oakley’s military line has transformed from a few models to a highly specialized division within Oakley. Today that same passion generates product prototypes in SLA liquid laser tanks. It sculpts in the virtual world of CAD/CAM engineering and renders innovations with

3-D digital mastering. New generations of products are constantly developed at Oakley’s California research and production facility. Oakley’s partnership with the U.S. Armed Forces began in the 1980’s. The alliance was formed to develop new technologies that improve the safety, performance and comfort of our soldiers. This initiative in research and development continues to produce combat ready equipment for those whose lives depend on their gear. From the billions spent each year on defense, these are just a few of the dividends. The Oakley Standard Issue (SI) Line, is designed exclusively for government customers. It is not available in retail stores. The Government Sales office is a division of Oakley’s main office in Foothill Ranch, California.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 126


Oakley Standard Issue : M Frames

SI Ballistic M Frame 2.0 Strike Array LPA-OY-11-138 • • • • • • • • • •

Compliant with ANSI Z87.1-2003 Compliant with MIL-PRF-31013 Vo Ballistics Blocks 100% UVA, UVB, UVC and blue light PASGT, CVC, and MICH helmet Compatible Night vision device Compatible Extended upper/lower/lateral viewing fields Polaric Ellipsoid geometry Ultra-lightweight design (1.05 oz total weight) Secure fit, even under wet conditions Easy lens replacement with no need for tools

The Oakley SI Ballistic M Frame 2.0 surpasses ANSI Z87.1 Industrial Standards for high-mass and high-velocity impact protection. All lenses are made of pure Plutonite®, a proprietary material gives you get razor-sharp clarity at all angles of view, which maximizes peripheral vision and protection against sun, wind and side impact. Frame: MATTE BLACK Lens : GREY, CLEAR W CASE & STRAP Page: 127

SI Ballistic M Frame 2.0 Strike HYBRID LPA-OY-11-142 • • • • • • • • • •

Compliant with ANSI Z87.1-2003 Compliant with MIL-PRF-31013 Vo Ballistics Blocks 100% UVA, UVB, UVC and blue light PASGT, CVC, and MICH helmet Compatible Night vision device Compatible Extended upper/lower/lateral viewing fields Polaric Ellipsoid geometry Ultra-lightweight design (1.05 oz total weight) Secure fit, even under wet conditions Easy lens replacement with no need for tools

The Oakley SI Ballistic M Frame 2.0 surpasses ANSI Z87.1 Industrial Standards for high-mass and high-velocity impact protection. The M Frame 2.0 additionally meets MIL SPEC MIL-PRF 31013. All lenses are made of pure Plutonite®, a proprietary material that offers the highest level of optical clarity available in eyewear. Frame : BLACK Lens : GREY

SI Ballistic M Frame 2.0 Strike STRIKE LPA-OY-11-140 • • • • • • • • • •

Compliant with ANSI Z87.1-2003 Compliant with MIL-PRF-31013 Vo Ballistics Blocks 100% UVA, UVB, UVC and blue light PASGT, CVC, and MICH helmet Compatible Night vision device Compatible Extended upper/lower/lateral viewing fields Polaric Ellipsoid geometry Ultra-lightweight design (1.05 oz total weight) Secure fit, even under wet conditions Easy lens replacement with no need for tools

The Oakley SI Ballistic M Frame 2.0 surpasses ANSI Z87.1 Industrial Standards for high-mass and high-velocity impact protection. The M Frame 2.0 additionally meets MIL SPEC MIL-PRF 31013. All lenses are made of pure Plutonite®, a proprietary material that offers the highest level of optical clarity available in eyewear. Frame : MATTE BLACK Lens : GREY - APEL APPROVED

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : M Frames

SI M Frame Hybrid S LPA-OY-11-078

• HIGH DEFINITION OPTICS® (HDO®) • Lens contours that extend peripheral vision • PLUTONITE® filters 100% of UVA/UVB/UVC & harmful blue light up to 400nm • Unsurpassed impact protection • Options include IRIDIUM® lens coatings and polarization • Comes with lens and nosepiece

The Oakley SI M Frame® surpasses ANSI Z87.1 Industrial Standards for high-mass and high-velocity impact protection. Incorporating HIGH DEFINITION OPTICS (HDO®) technology, lens geometry comes in five interchangeable lens shapes. All lenses are made of pure Plutonite®, a proprietary material that offers the highest level of optical clarity available in eyewear. You get razor-sharp clarity at all angles of view, which maximizes peripheral vision and protection against sun, wind and side impact. Frame : BLACK Lens : GREY

SI M Frame Strike LPA-OY-11-162

• Shatterproof, scratch-resistant Plutonite® polycarbonate lenses can be replaced with other colors and shapes, sold separately. • Polar Ellipsoid™ lens eliminates distortion • Hammerfang™ ear stems provide a 3-point fit • Hydrophilic silicone earsocks and nosepieces • Prescription ready. • Prescription M Frames available in a variety of lens colors

The Oakley SI M Frame® surpasses ANSI Z87.1 Industrial Standards for high-mass and high-velocity impact protection. Incorporating HIGH DEFINITION OPTICS (HDO®) technology, lens geometry comes in five interchangeable lens shapes. All lenses are made of pure Plutonite®, a proprietary material that offers the highest level of optical clarity available in eyewear. You get razor-sharp clarity at all angles of view, which maximizes peripheral vision and protection against sun, wind and side impact.

SI Ballistic M Frame Strike 3 Array LPA-OY-07-371

• Shatterproof, scratch-resistant Plutonite® lens • Lenses can be easily interchanged • Polar Ellipsoid™ lens shape eliminates distortion • Hammerfang™ ear stems provide 3-point fit • Hydrophilic silicone earsocks and nosepieces become tacky when wet, so they won’ t slip. • The eyewear and extra lenses fit into their own special case

The M Frame Array includes three shields of pure Plutonite. The grey lens controls reflection and transmission, while the clear and persimmon lenses provide optical armor for night and low light shooting. POLARIC ELLIPSOID geometry maintains razor sharp clarity to keep your focus on the bullseye and a low profile nosepiece won’t fragment your field of view. Frame: MATTE BLACK Lens : GREY, CLEAR, PERSIMMON

Frame:BLACK Lens : GREY Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 128


Oakley Standard Issue : M Frames

SI M Frame HYBRID 3 Lens Array LPA-OY-07-386

• Shatterproof, scratch-resistant Plutonite® lens • Lenses can be easily interchanged • Polar Ellipsoid™ lens shape eliminates distortion • Hammerfang™ ear stems provide 3-point fit • Hydrophilic silicone earsocks and nosepieces become tacky when wet, so they won’ t slip. • The eyewear and extra lenses fit into their own special case

The M Frame Array includes three shields of pure Plutonite. The grey lens controls reflection and transmission, while the clear and VR28 lenses provide optical armor for night and low light shooting. POLARIC ELLIPSOID geometry maintains razor sharp clarity to keep your focus on the bullseye and a low profile nosepiece won’ t fragment your field of view. Frame: BLACK Lens : GREY, CLEAR, VR28

Page: 129

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : O Frames

SI FLAK JACKET XLJ

SI FLAK JACKET

LPA-OY-11-004

LPA-OY-11-003

• Oakley HYDROPHOBIC™, a permanent lens coating prevents rain and sweat from building up on the lens • Change lenses in seconds to optimize vision in any sport environment. • HIGH DEFINITION OPTICS® (HDO®) • Choose the nose pads that give you the best fit - two sizes are included with every frame

• Oakley HYDROPHOBIC™, a permanent lens coating prevents rain and sweat from building up on the lens • Change lenses in seconds to optimize vision in any sport environment. • HIGH DEFINITION OPTICS® (HDO®) • Choose the nose pads that give you the best fit - two sizes are included with every frame

FLAK JACKET™ is made of lightweight O MATTER® for all-day comfort. Pure PLUTONITE® lens material filters out 100% of all UV, and FLAK JACKET™ meets ANSI Z87.1 standards for impact protection. The semi-rimless design means there’s no frame rim to block downward view. Optical clarity exceeds all ANSI Z87.1 standards, and XYZ OPTICS® extends razor-sharp vision all the way to the lens periphery.

FLAK JACKET™ is available in two lens shapes: standard size and the larger XLJ. Case included.

FLAK JACKET™XLJ is made of lightweight O MATTER® for all-day comfort. Pure PLUTONITE® lens material filters out 100% of all UV. FLAK JACKET™ meets ANSI Z87.1 standards for impact protection. The semi-rimless design means there’s no frame rim to block downward view. Optical clarity exceeds all ANSI Z87.1 standards, and XYZ OPTICS® extends razor-sharp vision all the way to the lens periphery. Case included. Frame: MATTE BLACK Lens : GREY LENS

SI Half Jacket LPA-OY-11-11-074 • • • • • • • •

Oakley’s first dual-lens - interchangeable Accented with true metal icons Lightweight O MATTER® frame UNOBTAINIUM® earsocks and grip anchors Molded ear and nose pieces for a secure fit Open-edge extends vertical field of vision, Lenses retains peripheral clarity - XYZ OPTICS® PRESCRIPTION READY

The patented innovations of Oakley optics are blended with photochromic technology which actively tunes the amount of light that reaches your eyes. Even better, the lenses include base colors that precisely balance light transmission and boost visual contrast to improve depth perception. This unique blend of innovations gives you the ultimate in performance and comfort while improving safety in environments ranging from overcast to bright sun. Frame : MATTE BLACK Lens : PERSIMMON (GREY) CASE INCLUDED

Frame: MATTE BLACK Lens : GREY Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 130


Oakley Standard Issue : O Frames

SI Half Jacket 3 Lens Array LPA-OY-11-090

• Oakley’s first dual-lens eyewear with interchangeable lenses • The Array consists of a grey, a clear, and a persimmon lens • Accented with true metal icons, the lightweight O MATTER® frame includes UNOBTAINIUM® earsocks and grip anchors • The open-edge design extends your vertical field of vision, and each set of optional lenses retains the peripheral clarity of XYZ OPTICS®

The SI Half Jacket Array comes with an assortment of interchangeable lenses in a special hard case. The open-edge design extends your vertical field of vision, and each set of optional lenses retains the peripheral clarity of XYZ OPTICS®. Shatterproof and scratchresistant Plutonite® polycarbonate lenses provide added durability, while ANSI Z87.1 standards. Frame : BLACK Lens : GREY, CLEAR PERSIMMON Page: 131

SI Transition SOLFX™ Half Jacket XLJ

SI Half Jacket XLJ 3 Lens Array

The XLJ version of our HALF JACKET® frame offers extended lens coverage for larger faces or for those who prefer an expanded field of view. Accented with true metal icons, the comfortably lightweight O MATTER® frame includes UNOBTAINIUM® components that increase grip with perspiration. The open-edge design extends your vertical field of vision, and each set of optional interchangeable lenses gives you the unbeatable clarity of HIGH DEFINITION OPTICS® (HDO®) plus 100% UV filtering.

The SI Half Jacket XLJ Array comes with an assortment of interchangeable lenses in a special hard case (includes case). The XLJ version of our HALF JACKET® frame offers extended lens coverage for larger faces or for those who prefer an expanded field of view. The open-edge design extends your vertical field of vision, and each set of optional lenses retains the peripheral clarity of XYZ OPTICS®. That’s just one of the patented innovations that give HIGH DEFINITION OPTICS® (HDO®) its unbeatable performance. Shatterproof and scratch-resistant Plutonite® polycarbonate lenses provide added durability, while meeting all ANSI Z87.1 standards for optical precision and impact resistance.

LPA-OY-11-008

Please note: These photochromic do not fade to clear in the absence of sunlight. Photochromic lenses darken in response to UV light, car windshields block most UV. Frame: MATTE BLACK Lens : PERSIMMON (GREY)

LPA-OY-11-091

Frame: BLACK Lens : GREY, CLEAR & PERSIMMON

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : O Frames

SI Gascan S

SI Gascan

LPA-OY-11-005

LPA-OY-03-473

• Peripheral vision is maximized by XYZ OPTICS®, an innovation that maintains visual clarity at all angles of view. • Medium to Large Fit. • Available in a polarized lens • O-Matter frame material exceeds the durability requirements of industrial applications that include chemical exposure and environmental extremes. • Polaric Ellipsoid Dual lens. • Durable, lightweight polycarbonate lenses provide startling optical clarity and protection against high-mass and high-velocity impact. • 100% UV Protection.

HIGH DEFINITION OPTICS® (HDO®) combines patented optics and PLUTONITE® lens material that provides 100% UV filtering and unsurpassed impact protection.

Two lenses are cut from the curve of a single lens shield, then mounted in the frame to maintain the original Continuous contor. Frame : MATTE BLACK Lens : GREY

Oakley pumped the dimensions of our original GASCAN® with the pulse of the street, fueling a one-of-a-kind. Now the aggressive design language called Oakley SQUARE O brings a new urban contender. GASCAN® S turns down the volume of O MATTER® frame material, reducing the overall size with some harder lines that make it streetwise. Metal icons tag it as true Oakley. HIGH DEFINITION OPTICS® (HDO®)keeps visual performance at full tilt, and impact protection meets all ANSI Z87.1 standards. Frame : MATTE BLACK Lens : GREY

SI Monster Dog LPA-OY-05-015 • • • • • • •

Spherical 8.75 base XYZ Optics Durable, lightweight polycarbonate 100% UV protection 60 mm Plutonite® lenses Available in a polarized lens Composite frame Ultimate clarity and superior impact resistance • 5-3/8” temple

Durable O MATTER® frame material forms massive fangs around the skull, combining with pure PLUTONITE® lenses to beat ANSI Industrial Standards for impact protection. O Matter frame material not only meets the demands of the field, it exceeds the durability requirements of industrial applications that include chemical exposure and environmental extremes. The lenses wrap around the head to maximize peripheral vision and protection. Patented XYZ OPTICS® maximizes peripheral vision while retaining critical clarity at all angles. Frame : MATTE BLACK FRAME Lens : GREY

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 132


Oakley Standard Issue : O Frames

SI Minute 2.0

SI Fives Squared

LPA-OY-11-009

LPA-OY-11-019

The Oakley MINUTE® eyewear is specifically designed for small to medium size faces, and version 2.0 gives you the comfort, protection and performance of the best eyewear on the planet.

MINUTE® 2.0 uses the patented innovations of HIGH DEFINITION OPTICS® (HDO®) to beat all standards of ANSI Z87.1, the industry’s yardstick for optical precision. Even the world’s best lenses can’ t perform if they’re covered with oily smears and water sheens, so we added a permanent coating called Oakley HYDROPHOBIC™ to repel rain, sweat, skin oils and dust. The pure PLUTONITE® lenses filter out 100% of all UV, not just UVA and UVB. Impact resistance meets all standards of ANSI Z87.1 and the Three-Point Fit uses supple UNOBTAINIUM® components to increase grip with perspiration. Frame: MATTE BLACK Lens : GREY, POLARIZED

• Durability and all-day comfort of lightweight, stress-resistant O Matter® frame material • Comfortable fit on small to medium faces via condensed cranial geometry • Optical precision and performance that meets all ANSI Z87.1 standards • Maximum clarity at all angles of vision with patented XYZ Optics®

If ordinary sunglasses just don’ t fit, FIVES SQUARED is the answer. Unlike conventional sunglasses that stick out at the sides, this frame uses Condensed Cranial Geometry for a tapered architecture that feels as good as it looks and it’s a look that soaks sophistication in adrenalin. Our Three-Point Fit maximizes comfort while holding the lenses in precise optical alignment, letting the innovations of HIGH DEFINITION OPTICS® (HDO®) do their work. Optical performance and impact protection meet ANSI Z87.1 standards.

SI Straight Jacket LPA-OY-11-013

With the STRAIGHT JACKET® you get the unbeatable clarity of HIGH DEFINITION OPTICS® (HDO®) including patented technologies like XYZ OPTICS® for crystal clear vision along the entire lens contour. The optics are so sharp, they exceed all ANSI Z87.1 standards.

Protection meets ANSI Z87.1 standards for both high-velocity and high-mass impact. The durable, lightweight O MATTER® frame utilizes soft UNOBTAINIUM® components to increase grip with perspiration. It’s all part of a Three-Point Fit that holds the lenses in precise optical alignment and offers all-day comfort. Frame : MATTE BLACK FRAME Lens : GREY, POLARIZED

Frame : MATTE BLACK Lens : GREY Page: 133

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : O Frames

SI Flak Jacket

SI Flak Jacket XLI

LPA-OY-11-434

LPA-OY-11-435

• • • • • • • • •

Interchangeable lenses Lightweight, stress-resistant O MATTER® frame Optimized peripheral vision and protection HYDROPHOBIC™/Oleophobic anti-smudge lens Three-Point Fit that holds lenses optical alignment Metal icon accents Optical precision meets ANSI Z87.1 standards Impact resistance meets ANSI Z87.1 standards PLUTONITE® lens filters 100% of UVA / UVB / UVC & harmful blue light up to 400 nm • Minimized glare • IRIDIUM® lens coating • UNOBTAINIUM® nose pad options

Sport professionals demand nothing less than the best. World-class athletes have driven us to create innovation after innovation, including interchangeable lens designs with unbeatable optical clarity. FLAK JACKET sunglasses take that to the next level with the latest in performance technology. Frame : MATTE BLACK Lens : GREY POLARIZED

• • • • • • • • •

Interchangeable lenses Lightweight, stress-resistant O MATTER® frame Optimized peripheral vision and protection HYDROPHOBIC™/Oleophobic anti-smudge lens Three-Point Fit that holds lenses optical alignment Metal icon accents Optical precision meets ANSI Z87.1 standards Impact resistance meets ANSI Z87.1 standards PLUTONITE® lens filters 100% of UVA / UVB / UVC & harmful blue light up to 400 nm • Minimized glare • IRIDIUM® lens coating • UNOBTAINIUM® nose pad options

The lenses in this polarized edition of FLAK JACKET are engineered to block the blinding rays of glare that are magnified by flat surfaces such as snow, water and pavement. Oakley uses a liquid infusion process to eliminate the haze and distortion found with ordinary polarized lenses. Optimized with Oakley polarization, FLAK JACKET offers the best optical performance.

SI Flak Jacket XLI Desert LPA-OY-11-052

FLAK JACKET™XLJ is made of lightweight O MATTER® for all-day comfort. Pure PLUTONITE® lens material filters out 100% of all UV, and FLAK JACKET™ meets ANSI Z87.1 standards for impact protection. The semi-rimless design means there’s no frame rim to block downward view. Optical clarity exceeds all ANSI Z87.1 standards, and XYZ OPTICS® extends razor-sharp vision all the way to the lens periphery. Frame : DESERT FRAME Lens : AMBER POLARIZED CASE INCLUDED

Frame : MATTE BLACK Lens : GREY POLARIZED Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 134


Oakley Standard Issue : O Frames

SI Half Jacket XLJ

SI Half Jacket

LPA-OY-11-101

LPA-OY-11-100 • • • • • •

Dual-lens eyewear - interchangeable lenses Available in a polarized lens. Accented with true metal icons lightweight O MATTER® frame UNOBTAINIUM® earsocks and grip anchors. Molded ear and nose pieces for a secure fit.

Sporting top-half frames coverage, these open-edge design sunglasses are a combination of enhanced style and performance. The open-edge design extends your vertical field of vision, and each set of optional lenses retains the peripheral clarity of XYZ OPTICS®. That’s just one of the patented innovations that give HIGH DEFINITION OPTICS® (HDO®) its unbeatable performance. Shatterproof and scratch-resistant Plutonite® polycarbonate lenses provide added durability, while meeting all ANSI Z87.1 standards for optical precision and impact resistance. Frame: BLACK Lens : GREY, POLARIZED Page: 135

• • • • • •

Dual-lens eyewear - interchangeable lenses Available in a polarized lens. Accented with true metal icons lightweight O MATTER® frame UNOBTAINIUM® earsocks and grip anchors. Molded ear and nose pieces for a secure fit.

The XLJ version of our HALF JACKET® frame offers extended lens coverage for larger faces or for those who prefer an expanded field of view. The open-edge design extends your vertical field of vision, and each set of optional lenses retains the peripheral clarity of XYZ OPTICS®. That’s just one of the patented innovations that give HIGH DEFINITION OPTICS® (HDO®) its unbeatable performance. Shatterproof and scratch-resistant Plutonite® polycarbonate lenses provide added durability, while meeting all ANSI Z87.1 standards for optical precision and impact resistance. Frame: BLACK Lens : GREY, POLARIZED

SI Gascan LPA-OY-11-122

• Peripheral vision is maximized by XYZ OPTICS®, an innovation that maintains visual clarity at all angles of view. • Medium to Large Fit. • Available in a polarized lens • O-Matter frame material meets the demands of field use, it exceeds the durability requirements of industrial applications

HDO® combines patented optics and PLUTONITE® lens material that provides 100% UV filtering and impact protection.

Two lenses are cut from the curve of a single lens shield, then mounted in the frame to maintain the original, continuous contour. Lightweight O MATTER® frame material offers premium comfort. Peripheral vision is maximized by XYZ OPTICS®, an innovation that maintains visual clarity at all angles of view. Impact protection meets ANSI Z87.1 standards. Frame : MATTE BLACK Lens : GREY, GREY POLARIZED

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : O Frames

SI Gascan S

SI Straight Jacket LPA-OY-11-014

LPA-OY-11-006 • • • • • •

Polaric Ellipsoid Dual lens. Durable, lightweight polycarbonate lenses Medium to Large Fit O -Matter frame material 100% UV Protection. PRESCRIPTION READY

HDO® combines patented optics and PLUTONITE® lens material that provides 100% UV filtering and unsurpassed impact protection.

Two lenses are cut from the curve of a single lens shield, then mounted in the frame to maintain the original, continuous contour. Lightweight O MATTER® frame material offers premium comfort. Peripheral vision is maximized by XYZ OPTICS®, an innovation that maintains visual clarity at all angles of view. Impact protection meets ANSI Z87.1 standards, and our Three-Point Fit retains the lenses in precise optical alignment. True metal icons sign this Oakley original. Frame : MATTE BLACK Lens : GREY , GREY POLARIZED

With the STRAIGHT JACKET® you get the unbeatable clarity of HIGH DEFINITION OPTICS® (HDO®) including patented technologies like XYZ OPTICS® for crystal clear vision along the entire lens contour. The optics are so sharp, they exceed all ANSI Z87.1 standards.

Protection meets ANSI Z87.1 standards for both high-velocity and high-mass impact. The durable, lightweight O MATTER® frame utilizes soft UNOBTAINIUM® components to increase grip with perspiration. It’s all part of a Three-Point Fit that holds the lenses in precise optical alignment and offers all-day comfort. Frame : MATTE BLACK Lens : GREY POLARIZED

SI Fives Squared LPA-OY-11-020

• Durability and all-day comfort of lightweight, stress-resistant O Matter® frame material • Comfortable fit on small to medium faces via condensed cranial geometry • Optical precision and performance that meets all ANSI Z87.1 standards • Maximum clarity at all angles of vision with patented XYZ Optics®

If ordinary sunglasses just don’ t fit, FIVES SQUARED is the answer. Unlike conventional sunglasses that stick out at the sides, this frame uses Condensed Cranial Geometry for a tapered architecture that feels as good as it looks and it’s a look that soaks sophistication in adrenalin. Our Three-Point Fit maximizes comfort while holding the lenses in precise optical alignment, letting the innovations of HIGH DEFINITION OPTICS® (HDO®) do their work. Optical performance and impact protection meet ANSI Z87.1 standards. Frame : MATTE BLACK Lens : GREY POLARIZED

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 136


Oakley Standard Issue : O Frames

SI Splinter

Crosshair 2.0

LPA-OY-11-437

LPA-OY-004044-01

• Ultra-lightweight hi-modulus C-5™ metal • Hydrophilic UNOBTAINIUM® earsocks ensure a snug, secure fit • Comfort and performance of Three-Point Fit that holds lenses in precise optical alignment • Custom engineered spring hinge mechanisms • Metal Icon Accents • Optimized peripheral vision and side protection of 8.75 base lens curvature • Optical precision, performance and impact resistance meets all ANZI Z80.3 standards • UV protection of PLUTONITE® 100% of UVA/ UVB/UVC & harmful blue light up to 400nm • Patented XYZ OPTICS® for maximum clarity at all angles of vision

SPLINTER is a look of street sophistication that takes inspiration from Oakley athletes, and if you look closely, you can see the character of our best sport frames in the sleek sculpture of C-5™ alloy Frame : MATTE BLACK Lens : GREY POLARIZED

Page: 137

• Oakley HDPolarized -Minimized glare greater than 99% polarization efficiency • Dual lens polaric ellipsoid geometry • Optical precision meets ANSI Z80.3 standards • Plutonite lens filters 100% of UVA/UVB/UVC & harmful blue light up to 400nm • Patented XYZ OPTICS® for clarity at all angles • Ultra-lightweight hi-modulus C-5™ metal • Hydrophilic UNOBTAINIUM® earsocks • Three-Point Fit holds lenses in precise alignment • Integrated Metal Icon Accents

Classic meets contemporary in CROSSHAIR™ 2.0, the latest rendition of a lightweight C-5 alloy metal frame that merges classic aviator design with a contemporary lens shape and subtle sculptural details. The two lenses are cut from a single toric shield and mounted precisely to maintain the original contour.

SI Sand/Wind/Dust Goggle LPA-OY-02-414

The SI Sand/Wind/Dust Goggle is specifically designed to perform in the most adverse conditions. The anti-fog lens is optimized for a full field of peripheral clarity with POLARIC ELLIPSOID geometry. The flexible urethane chassis is chiseled with ram-air surge ports for a circular flow of defogging ventilation. A triple layer of face foam insulates and cushions the contact surface for the ultimate in thermal shielding and comfort. Frame : BLACK Lens : GREY

Frame : MATTE BLACK Lens : GREY POLARIZED

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : O Frames

A Frame Assault Goggle LPA-OY-02-550 • • • • •

• • • •

Anti-fog lens optimized for peripheral clarity Flexible chassis with ram-air surge ports Triple layer of face foam for thermal shielding Reduced height for better interface to helmet Refractive Power, Prismatic Power, Astigmatism and Optical Clarity meet or exceed ANSI Z87.1- 2003 requirements Haze less than 3%. Low profile closed cell face foam for closer fit Temporal buckles avoid interference with helmet straps Meets or exceeds ANSI Z87.1- 2003 for High Velocity and High Mass Impact

The Oakley SI Assault A-Frame Military Goggle is the ultimate in protection. Many personnel still have both eyes today because their Oakley eyewear stopped a fragment from an IED or RPG. Frame : BLACK Lens : GREY, CLEAR, VR28

SI Ballistic Goggle NSN#4240-01-563-5699 LPA-OY-11-130

• Compliant with ANSI Z87.1-2003 requirements • Compliant with ballistic resistance requirements • Plutonite lens blocks 100% of UVA, UVB, UVC & harmful blue light up to 400nm • Compatible PASGT/CVC/ACH & MICH helmets • Compatible with helmet-mounted night vision • Compliant with all ANSI Z87.1-2003 optical performance requirements • Distortion-free High Definition Optics • Permanent anti-fog lens coating • Meets ballistic fragmentation impact standards per MIL-DTL-43511D

The SI Ballistic Goggle is designed to present the best Oakley has to offer in protection, optical performance, and comfort. The SI Ballistic Goggle is equipped with a micro-fleece face-foam liner to provide a secure and comfortable fit for all sized heads. Fully compatible with MICH, ACH, CVC, AND PASGT helmets. Frame : BLACK Lens : GREY, CLEAR

SI Ballistic Fan Goggle LPA-OY-11-174

• 15,000 rpm fan pumps 864 cubic inches of cooling air every minute • Ultra low noise signature maintains stealth • Hermetically sealed power unit provides six hours of runtime with one L91 AA battery • Patented Polaric Ellipsoid Geometry maintains clarity at all angles of vision, even at lens periphery • Closed-cell face foam provides sweat control • Low-profile geometry with lateral curvature maximizes the field of view • Anti-fogging treatment • Plutonite shield blocks 100% of all UVA, UVB, UVC and harmful blue light • Compliant with ANSI Z87.1-2003 requirements • Meets ballistic standard MIL-DTL-43511D

Rotating 250 times each second, a miniature fan pumps cooling airflow through this optically tuned shield that defends against the airborne assault of sand and wind. Frame : BLACK Lens : GREY, CLEAR

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 138


Oakley Standard Issue : Footwear

SI Gatling 8” Boot LPA-OY-11091-889 • • • • • • • •

1.8-2.0 mm waterproof flesh-out leather 2.4 mm Cordura breathable package Low coefficient ETC anti-friction textile 6mm Perforated urethane tongue foam 10mm Perforated urethane collar foam Cord #18 Nylon Laces Military approved. [Heel] 1.7mm thermo impregnated heel counter [Toe] 1.3mm Thermoplastic molded box toe

The new Gatling 8” boot features directional lug design on the rubber outsole which provides wet and dry slip resistance for both smooth and rough surfaces. Improved stability for load bearing applications. High abrasion resistant outsole compound provides excellent durability. Soft temper, full grain flesh out leather for optimum comfort and durability. Gusseted tongue prevents entry of water and debris. Prime urethane shock absorbing insole with anatomical curvature provides biomechanical support and cushioning.

SI Hot Weather Assault Boot 6” LPA-OY-11092-889C • • • • • •

Brushed Leather & Canvas Lightweight vulcanized rubber cup sole High G-Last Roomy box toe 632 grams Sizes M (6-14,15)

Advanced polymer EVA and premium urethane offer resilient shock absorption. Vibram high-NBS vulcanized rubber maintains traction over a full range of terrain. Made in the USA. Berry compliant. Sizes : M (6 -14, 15) Colour: TAN Width : REGULAR, WIDE

SI Hot Weather Assault Boot 8” LPA-OY-11093-889C • • • •

Tan (Brushed Leather & Canvas) Lightweight vulcanized rubber cup sole High G-Last, Roomy box toe 651 grams

The New Oakley Hot Weather Assault Boot offers the comfort of prime urethane shock absorption and the climate control of a moisture wicking liner. The boot features advanced polymer EVA and premium urethane offer resilient shock absorption and Vibram high-NBS vulcanized rubber which maintains traction over a full range of terrain. Made in the USA. Berry compliant. Sizes : M (6 -14, 15) Colour TAN Width : REGULAR, WIDE

Sizes : M (6 -14, 15) Colour: TAN Width : REGULAR Page: 139

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : Footwear

SI Temperate Weather Assault Boot 6” LPA-OY-11094-889C • • • • •

Tan (Brushed Leather & Canvas) Lightweight vulcanized rubber cup sole High G-Last Roomy box toe 637 grams

Advanced polymer EVA and premium urethane offer resilient shock absorption. High-NBS vulcanized rubber maintains traction over a full range of terrain. Made in the U.S.A. Berry compliant. Sizes : M (6 -14, 15) Colour DESERT Width : REGULAR, WIDE

SI Temperate Weather Assault Boot 8” LPA-OY-11094-889C • • • • •

Tan (Brushed Leather & Canvas) Lightweight vulcanized rubber cup sole High G-Last Roomy box toe 715 grams

These boots are designed for use in temperate to warm conditions. Advanced polymer EVA and premium urethane offer resilient shock absorption. High-NBS vulcanized rubber maintains traction over a full range of terrain. Made in the U.S.A. P/N 11095-889C (desert) and 11095-889WC (desert wide). Berry compliant. Sizes : M (6 -14, 15) Colour: DESERT Width : REGULAR, WIDE

SI Approach Mid LPA-OY-11099-317

• PRIMARY OUTER MATERIAL: Resin coated cotton textile • SECONDARY OUTER MATERIAL: Scotchguard® treated pig suede • LINING: Low friction ETC™ lining package • FOAMS: 16mm medium density collar foam, 5mm low density tongue foam • TRIMS: Rubber protected toe and heel cups • LACE: Flat braided cotton laces • TOE: Hot melt for superior shape retention.

Puncture proof Lenzi™ protection underfoot. Specially formulated EVA provides maximum step-in comfort and set properties. Slip resistant Unobtanium™ outsole delivers exceptional traction on flat surfaces in both wet and dry conditions. Covered tongue shield prevents entry of water and debris. Low coefficient of friction lining package minimizes heat generation during use. Sizes : M (6 -14, 15) Colour: DUNE Width : REGULAR, WIDE

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 140


Oakley Standard Issue : Footwear

SI Assault Shoe

SI Assault Boot 6”

LPA-OY-11097-001

LPA-OY-11096-001A

• For wet/dry traction on both smooth and rough terrain • Soft temper for comfort and silent movement • Athletic design for performance and agility • Low-friction lining with anti-microbial treatment Moisture wicking to maintain optimal foot climate • Prime shock absorption of lightweight polyurethane • Abrasion resistant sole of vulcanized rubber with traction of directional lug design • Ergonomically optimized geometry with enhanced load-bearing stability

Features enhanced load-bearing stability, improved anatomical fit and even greater tread durability. Prime urethane shock absorption and moisture wicking linings maintain the highest level of comfort. For wet/dry traction on both smooth and rough terrain, the sole combines vulcanized rubber with directional lug geometry. Sizes : M (6 -14, 15) Colour: BLACK Width : REGULAR Page: 141

• Soft temper for comfort and silent movement • Athletic design for performance and agility • Climate control of moisture wicking liner, plus gusseted tongue to block debris entry • Low-friction lining & anti-microbial treatment • Shock absorption of lightweight polyurethane • Jump ready design with over-ankle boot shaft • Vulcanized rubber sole with lug geometry • Optimized geometry for load-bearing stability

Features enhanced load-bearing stability, improved anatomical fit and even greater tread durability. Lightweight and athletically inspired, it offers the comfort of prime urethane shock absorption and the climate control of a moisture wicking liner. The vulcanized rubber sole includes directional lug geometry and provides wet/dry traction on both smooth and rough terrain. Available in Black or the Desert variant that matches split suede leather with breathable Cordura® Sizes : M (6 -14, 15) Colour: DESERT, BLACK Width : REGULAR, WIDE

SI Assault Boot 8” LPA-OY-11098-001A

• Soft temper for comfort and silent movement • Athletic design for performance and agility • Climate control of moisture wicking liner, plus gusseted tongue to block debris entry • Low-friction lining & anti-microbial treatment • Shock absorption of lightweight polyurethane • Jump ready design with over-ankle boot shaft • Vulcanized rubber sole with lug geometry • Optimized geometry for load-bearing stability

Features enhanced load-bearing stability, improved anatomical fit and even greater tread durability. Available in Black or the Desert variant that matches split suede leather with breathable Cordura®. Lightweight and athletically inspired, it offers the comfort of prime urethane shock absorption and the climate control of a moisture wicking liner. The vulcanized rubber sole includes directional lug geometry and provides wet/dry traction on both smooth and rough terrain. Sizes : M (6 -14, 15) Colour: DESERT, BLACK Width : REGULAR, WIDE

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : Footwear

All Weather SI Boot LPA-OY-11140-001

• Waterproof genuine leather (2.0-2.2mm) • Moisture wicking textile with waterproof membrane and 200g Thermolite insulation • Responsive, lightweight Ortholite footbed • Polyurethane midsole for shock attenuation • Lightweight outsole of vulcanized rubber • Engineered tread pattern for superior traction • Tongue gussets to block entry of debris • Collar and tongue foam for extra comfort

Mission specialists and first responders have to deal with a wide range of weather. Membrane technology maintains a breathable waterproof barrier while insulating the foot with premium Thermolite® insulation. Stay warm, dry and comfortable in this ruggedly durable design that maintains mobility. Comfort is optimized by an Ortholite® footbed and a polyurethane midsole that attenuates shock. Engineered vulcanized rubber outsole with a unique lug pattern for sure footing. Sizes : M (6 -14, 15) Colour: DESERT, BLACK Width : REGULAR, WIDE

LSA Water Boot LPA-OY-11148-86Y

• 1.4-1.6mm Scotchgard treated pig suede plus 1000 Denier Cordura • Comfortable snug, glove-like performance fit • Rapid drainage and quick-drying elements • Low-profile flat laces to eliminate pressure points when boot is used with swim fins • Specially formulated EVA for maximum stepin comfort and long lasting shock absorption • Slip-resistant Unobtainium outsole traction on flat surfaces in both wet and dry conditions • Gusseted tongue blocks water & debris

This is the water-optimized edition of the Oakley Land/Sea/Air (LSA) boot. Focusing on mission-specific requirements, the design paradigm of LSA was developed to maximized critical performance features for defined theaters of operation. In simple terms, it’s about using the right tool for the job, and LSA offers the most specialized and optimized gear that innovation can provide. Sizes : M (6 -14, 15) Colour: MULTICAM, DESERT Width : REGULAR

LSA Terrain Boot LPA-OY-11151-86Y

• 1.4-1.6mm Scotchgard treated pig suede plus 1000 Denier Cordura • Anatomically corrected for a comfortably snug, glove-like performance fit • Puncture-proof Lenzi underfoot protection • Specially formulated EVA for maximum stepin comfort and long lasting shock absorption • Slip-resistant Unobtainium outsole for traction on flat surfaces in both wet and dry conditions • Gusseted tongue blocks water and debris

The protection and performance of this boot earn the authenticity of the Oakley icon. Composed of five layers, a Lenzi™ board shields the underfoot with a puncture-proof barrier. The Unobtainium™ outsole was developed for high abrasion resistance plus slip resistance that provides exceptional surface grip, even on flat surfaces in both wet and dry conditions. Sizes : M (6 -14, 15) Colour: MULTICAM, DESERT Width : REGULAR

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 142


Oakley Standard Issue : Gloves

SI Assault Gloves LPA-OY-94025-001

• Nonrestrictive Airprene® mid-height cuff with secure Velcro® closure. • Available in two colors - black or desert • Finger Air Vents • Molded, punched neoprene finger ridges • Mark suede finger surfaces • Air mesh vents • Sonic welded • Carbon knuckle protector

Military protective gloves have special requirements. The SI Assault Gloves have many useful features. Rugged micro-vented leather palm reinforced and carbon fiber knuckle plating. Premium leather and durable synthetics with flexible articulated construction. Mesh zones and rubber exhaust ports for comfortable breathability. Surfacing on palms and fingers for a secure grip plus textured pull for easy donning.

SI Tactical FR Glove LPA-OY-94086-001 • • • • • • • • •

2 Layers of 180g Nomex for added protection Pittards Digital Goatskin leather palm Protective Knuckle wrapped in Pittards leather Box Finger construction for dexterity Single hook and loop wrist closure Flammability ASTM D6413 Char Length-Max Average 4.5” After Flame-Max Average 2.0 seconds NFPA 1971-07 Section 7.73 Heat & Thermal Shrinkage

Military protective gloves have special requirements. Rugged Pittards Fire Resistant leather palm and topside reinforcements. Anatomical protective knuckle plating covered with FR leather. Two layers of Nomex protect back of hand and fingers. The SI Tactical FR Glove complies with ASTM D6413 NFPA 1971 Section 7.7.3 standards for flame resistance.

Sizes : S - XL Colour :BLACK, DESERT

Page: 143

Sizes : S - XL Colour: BLACK, DESERT, COYOTE, FOLIAGE GREEN

Lightweight FR Glove LPA-OY-94107-001 • • • • •

Comfort of lightweight chassis Durability & dexterity of Pittards leather palm Reinforced Kevlar knuckle & finger joints Meets NFPA 1971-07 Thermal Resistance Meets ASTM D 6413 Flame Resistance

With the old technologies of flame resistance, you may as well go into battle with oven mitts. New innovations allow for lightweight designs that maximize dexterity and the tactile feel needed in critical operations. This is the LIGHTWEIGHT FR GLOVE, an Oakley invention that meets military flame resistance requirements with a low-bulk design of high performance. We reinforced it with Kevlar® in the knuckle and finger joints, and for added dexterity, the palm is constructed with durable Pittards® leather. When you’re going in fast and light, this is the glove that gets the job done without sacrificing essential protection. Sizes : S - XL Colour: BLACK, DESERT, COYOTE, FOLIAGE GREEN

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : Gloves

FR Fast Rope Glove LPA-OY-94109-001

• Aluminized Carbon-X® under palm • Abrasion resistance of Pittards Keratan leather reinforcement on palm and fingers • Added protection of dual-layer 180g Nomex • Molded polycarbonate & leather knuckle • Secure fit of micro hook & loop pad closure • Meets ASTM F 1790 Fabric Cut Resistance • Meets ASTM D 6413 Flame Resistance • Meets NFPA 1971-07 Thermal Resistance

Engineered for fast-rope tactical operations, the FR FAST ROPE GLOVE takes advantage of technology utilized for flame protection in Oakley professional racing gear. Aluminized Carbon-X® greatly reduces thermal transfer. Dual-layer Nomex® offers added protection with flame resistance that meets the requirements of the ASTM D 6413 standard. For the outer layer of the palm, we used premium Pittards® Keratan, and the fingers get the same durable leather for unrivaled abrasion resistance. Sizes : S - XL Colour: BLACK, COYOTE Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 144


Oakley Standard Issue : Load Carriage

Kitchen Sink

Panel Pack

LPA-OY-92060-001

LPA-OY-92131-86Y

• 31L capacity • Padded panel for up to 17” widescreen laptop with side access • Front compression molded organizer panel • Bottom shoe compartment • Compression molded brushed optics/media player pocket on lid • Compression molded back panel with 1/2” embossed channels for airflow • Dual mobile electronics holsters on shoulder straps • Removable padded waist strap with extra pockets • Metal accents for lid closure, handle, and shoulder strap detail • Rubberized bottom • Nylon and Polyester • 20” H x 14” W x 8” D

Large sized backpack with lid style opening, single panel main compartment, padded computer panel with side entry, 2 side pockets, and front organizer panel

• • • • • • • • •

Foam padded adjustable shoulder straps. Buckle closure on main compartment. Mesh backing for added breathability. Side pockets with angled zips. Secure rear compartment pocket. Media pocket with headphone access. Sleeve pocket for handheld electronic items. Key ring clip secures your keys. Dimensions: 19” H x 14” W x 8” D.

Any backpack can haul the chaos of a busy life. This one brings order to your world. Open the side access and slide a laptop up to 15” into the padded sleeve. A strap holster keeps your phone within grabbing distance, and your media player goes in the easy-access top pocket. There’s a temple holster for your shades and an internal organizer for all those items you need to keep handy, including your peripherals and cables. If you feel like you’re carrying the world on your shoulders, you’ll appreciate the soft padding of the ergonomic harness. Size : S - XXL Colours : MultiCam, New Khaki, Black

Vertical Computer Bag LPA-OY-92133

• 6” H x 12” W x 4” D 40.6cm x 30.5cm x 10.2cm • Ballistic nylon • Padded sleeve for your laptop (up to 15” size) • Low-profile side pockets for your power brick, cables and extras • Revamped handle with streamlined shape • Ergonomic non-slip shoulder strap • Top pocket for your travel documents • Pass-through pocket to attach to rolling bag • RF wave-blocking accessory pocket for your Bluetooth®-enabled wireless devices • Panel organizer for your peripherals, pens, disks and cables • Mesh pocket for your water bottle, designed to stow away when not in use

A computer bag should be as streamlined as our performance tools. If you’re still using a conventional computer briefcase, it’s time to step up your approach to mobility Colour: Black - Jungle Camo

Colour: Black Page: 145

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : Load Carriage

Payload Duffel LPA-OY-92142-001 • • • • •

2” L X 10” W X 11” D 2 2500 cubic inches capacity 1680D poly fabric for durability Shoe pocket on one end Removable shoulder strap with non slip padding • Rubberized bottom

Top loading duffel bag with end pockets, front/back pockets and carrying handle with shoulder strap Colour: Black, Tan

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 146


Oakley Standard Issue : Accessories

Flak Jacket Nosepiece Kit

M Frame Nosepiece Kit M Frame 2.0 Earsock/ LPA-OY-06-596 Nosepiece Kit

LPA-OY-06-210 • • • • •

The kit includes two temple sleeves and a nosepiece. For a comfortable fit that grips even better with perspiration, all components are made of Oakley UNOBTAINIUM®.

Includes: Earsocks Nosepieces Stem Sleeves Colour: Black

Change your look with a new color of frame components. Each kit contains two sizes of nose pads so you can tweak the fit and optimize comfort. You also get a pair of matching stem sleeves, and all components are made of supple UNOBTAINIUM® to increase grip with sweat.

Fits : M FRAME®, PRO M FRAME®

LPA-OY-06-699

Each kit fits and includes two temple sleeves and a nosepiece. For a comfortable fit that grips even better with perspiration, all components are made of Oakley UNOBTAINIUM®. Fits : M FRAME®, PRO M FRAME®

Fits : FLAK JACKET

Page: 147

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : Accessories

Lens Cleaning Kit LPA-OY-07-012

Even the best optics on earth can be compromised by dirt, dust and the natural oils of your skin. Specially formulated for Oakley eyewear, our cleaning solution offers the highest level of clarity without affecting the optical precision of our performance lens coatings. The pump atomizer delivers a measured dosage for each lens surface. You also get a mini screwdriver, plus a streak-free cloth. All components fit conveniently in a durable case of ballistic nylon. Suitable For : Any Oakley Glasses.

Nanoclear Lens Cleaner + Hydrophobic Kit LPA-OY-07-313

• Oakley NANOCLEAR™ lens cleaner “pen” • Streak free MICROCLEAR™ cleaning cloth • Hydrophobic solution cleans lenses + repels dirt, water and oils • Up to 50 applications • Anti smudge (AS) • Suitable for any eyewear, lens or frame

NANOCLEAR™ LENS CLEANER + HYDROPHOBIC is a complete kit that lets you clean your lenses and give them a specifically engineered coating in one step. The coating prevents water from leaving streaks and sheens that can corrupt your vision, and it creates a smudge-resistant barrier that repels skin oils and lotions. Contains : 1 x Bottle of Hydrophobic lens treatment 1 x Pen applicator 1 x HDO MICROCLEAN Cloth

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 148


Oakley Standard Issue : Accessories

Large Soft Vault LPA-OY-07-025

Safeguard your performance eyewear in a lightweight chamber using a durable Kevlar exterior and protective nylon interior. Protects : BIG SQUARE WIRE®, BOTTLECAP™, GASCAN™, GASCAN™S, HALFJACKET®, MONSTERDOG™, MONSTER PUP™, STRAIGHT JACKET.

Small Soft Vault LPA-OY-07-016 • • • •

Sunglass case Lightweight shell of reinforced nylon Zip closure Embossed logo

The smallest of the soft vaults, made from tough and durable nylon. Embossed icon and accent zip fob.

Colour: BLACK Protects: A WIRE®, A WIRE® 2.0, C WIRE®, E WIRE® 2.0, E WIRE® 2.1, FATE®, HALF PINT™, HAYLON™, MINUTE®, OAKLEY CANTEEN™, TEASPOON®, T WIRE®, Titanium A WIRE®, Titanium C WIRE®, TWITCH™, WHISKER®, XS FIVES®.

Page: 149

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Oakley Standard Issue : Accessories

Half Jacket/Flak Jacket Array Case

SI Ballistic Goggle 3-Array Case

Store a complete Half Jacket or Flak Jacket lens/frame assembly plus two extra sets of accessory lenses. Sealed with a zip closure, this semi-rigid nylon case utilizes highdensity foam to help protect your optical instrument.

Engineered to fit any Oakley goggle, this semi-rigid case of ballistic nylon is a mobile bunker for your precision optical instrument. Engineered for the A Frame™, our new Goggle Case is lined with soft, plush poly-knit trilaminate fleece. Goggle sold separately.

LPA-OY-07-346

LPA-OY-11-448

Micro Bag 5 Pack LPA-OY-11-115 NSN: 4240-01-525-3109

The Oakley Sunglass Case Micro Bag keeps your eyewear protected and cleans them too. Available in packages of 5. Protects : Any Oakley Glasses.

Colour: BLACK Protects : FLAK JACKET, HALF JACKET Colour: BLACK Protects : Any Oakley Goggle.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 150


Ops Core

Page: 151

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Ops Core

Ideas about safeguarding the soldier used to be predominantly defensive. Today, the ability to offensively respond to threats faster than the enemy is crucial to the concept of protection. The human brain, eyes and ears are highly evolved to sense and react instantaneously. Yet with the advent of new technologies to enhance these senses and increase awareness, today’s soldier has been burdened by an excessive amount of equipment to carry on the head. Traditional military helmets were never intended

for this purpose and therefore provide a “solution� that is uncomfortable, unstable and often compromises the very senses it is trying to protect. Helmets, gas masks, goggles, visors, mandibles, communication headsets, illuminators and identification devices are all made by different companies that focus on the performance of their own product. Until now, the soldier was left to figure out how to make them all work together. A synergetic system can only result from the careful consideration of all the devices

and cooperation between the various headborne equipment manufacturers. Ops-Core offers multiple helmet solutions, upgrade components and accessories to create a platform with the sole purpose of achieving this goal. By respecting the anatomy of the elite warrior and the complexity of the equipment, we have built a foundation for all the elements to work in harmony and yield a solution far greater than the sum of its parts.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 152


Ops Core

FAST Ballistic High Cut FAST Carbon Helmet LPA-OE-69-99-121

LPA-OE-59-99-121

• Same amount of head coverage / size as MICH 2002 “Gun-Fighter” model cut • Carbon + UHMWPE shell = 20% lighter • FAST helmet fully loaded (as shown here) - weighs less than same size MICH 2002 without add-ons • Lightweight, multi-impact, ventilated liner with repositionable EPP impact pads and LDV closed-cell comfort foam • Occ-Dial adjustable fitband with replaceable leather front, nape, and side pads • Integrated Head-Loc chinstrap retention system for stability • FAST-ARCs - 4 Position Accessory Rail Connectors: non-snag attachment points • BISS-NVD lanyard / elastic tensioner to eliminate device rattle or vibration • MARSOC / WARCOM 3-hole pattern • Ops-Core VAS Shroud (sold separately)

• Lightweight carbon fiber shell • Ideal for recce operations, fast roping, climbing, training • Designed with the structural integrity to comfortably support binocular style NVDs • Identical to ballistic version except for shell • Lightweight, multi-impact, ventilated liner with repositionable EPP impact pads and LDV closed-cell comfort foam • Occ-Dial adjustable fitband with replaceable leather front, nape, and side pads • Integrated Head-Loc chinstrap retention system for stability • FAST-ARCs - 4 Position Accessory Rail Connectors: non-snag attachment points • BISS-NVD lanyard / elastic tensioner to eliminate device rattle or vibration • MARSOC / WARCOM 3-hole pattern • Ops-Core VAS Shroud (sold separately)

Size : S/M M/L L/XL Colour: MULTICAM, FOLIAGE, BLACK, URBAN TAN, DESERT MARPAT VAS SHROUD: WITH/ WITHOUT

Size : S/M M/L L/XL Colour: MULTICAM, FOLIAGE, BLACK, URBAN TAN, DESERT MARPAT VAS SHROUD: WITH/ WITHOUT

Page: 153

FAST Base Jump MIL LPA-OE-58-99-141

• Same design as the Ballistic and Carbon FAST helmets but with a polycarbonate shell and molded front NVG mount • Great for training, search and rescue, climbing, and other outdoor activities. • lower cost, comparable to other recreational sport helmets • Integrated military style Head-Loc chinstrap • Lightweight, multi-impact, ventilated liner with repositionable EPP impact pads and LDV closed-cell comfort foam • 1/2” and 3/4” EPP pads included • Occ-Dial adjustable fitband with replaceable leather front, nape, & side pads • FAST-ARCs - 4 Position Accessory Rail Connectors: non-snag attachment points • Molded-in front mount to attach lights, cameras and NVG brackets • Bungees for NVG stability • Side Velcro loop • Includes a Picatinny Adapter and Wing-Loc Adapter and Universal Adapter

Size : M/L L/XL Colour: MULTICAM, GREEN, BLACK, TAN, DESERT MARPAT, RED

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Ops Core

FAST Base Jump SP LPA-OE-57-99-121

• Same design as the Ballistic and Carbon FAST helmets but with a polycarbonate shell and molded front NVG mount • Great for training, search and rescue, climbing, and other outdoor activities. • lower cost, comparable to other recreational sport helmets • Integrated military style Head-Loc chinstrap • Lightweight, multi-impact, ventilated liner with repositionable EPP impact pads and LDV closed-cell comfort foam • 1/2” and 3/4” EPP pads included • Occ-Dial adjustable fitband with replaceable leather front, nape, & side pads • FAST-ARCs - 4 Position Accessory Rail Connectors: non-snag attachment points • Molded-in front mount to attach lights, cameras and NVG brackets • Bungees for NVG stability • Side Velcro loop • Includes a Picatinny Adapter and Wing-Loc Adapter and Universal Adapter

Skull Crusher LPA-OE-50-99-100

• Provides a stable platform for attaching helmet accessories in environments where a ballistic mounting platform is not needed • Lightweight, breathable and comfortable for extended use • One size fits all: three adjustment dial knobs allow for comfort adjustments to any size or shape head • Compatible with all components that fit the VAS Shroud or ARC Rail • Includes two thicknesses (1/2” and 3/4”) of pads allowing for customization of fit and comfort • Wire and cable management system to route external wires and cables in a streamlined configuration • Available in standard buckle configuration and LED (Left Eye Dominant) • Counterweights sold separately

Size : FULLY ADJUSTABLE Colour: BLACK

Size : M/L L/XL Colour: GREEN, BLACK, TAN, DESERT RED Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 154


Ops Core

EXTERIOR MOUNTING SYSTEM

ILLUMINATORS

IFF DEVICES

VIDEO CAMERAS

ACCESSORY ADAPTERS

NIGHT VISION GOGGLES

GOGGLES

COMMs HEADSETS

MANDIBLES

O2 MASKS

SIDE ARMOR

Page: 155

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Ops Core

Peltor Headset

Up-Armor Side Covers Ballistic

• Third generation COMTAC Headset from Peltor • Features external microphones for “talkthru” capability so the users can maintain situational awareness while still protecting their hearing • Compatible with all FAST Helmets, except FAST Ballistic Full Ear • Attaches to the side rails instead of using the traditional headband • Exterior mounting eliminates pressure points on the head from extended wear • The mounting arms snap in and out, and can be individually rotated to the back of the helmet • Available in multiple colors, and radio and COMM configurations

LPA-OE-37-99

• Provides additional ballistic coverage and environmental protection, allowing the user to quickly adjust the level of ballistic coverage to match changing threat levels • Meets level IIIa NIJ standard and 2007 ACH CO/PD-05-04 Fragmentation Protection minimum V50 Ballistic Protection Limits • Low profile design does not interfere with sighting on shoulder fire weapon systems • Attachment to FAST Helmet ARCs is tool-less and takes less than a minute • Utilization of a two point attachment system to the ARC provides a strong rigid base • Comprised of durable carbon fiber exterior and a ballistic puck interior • Compatible with all Ballistic and Non-Ballistic FAST Helmets • Not compatible with Peltors

Gunsight Mandible LPA-OE-38

• The mandible uses a combination of soft armor and support frame technology to provide lower face protection from frag, flying debris, bumpy vehicle rides, as well as for ATV training exercises and rough terrain landings during airborne operations • It quickly and easily attaches and detaches from the helmet side rails • The mandible is flexible and is designed to fold in half to conveniently fit into a rucksack • The flexibility allows a close cheek weld and causes minimum interference with sighting shoulder weapons

Colour: MULTICAM, TAN DESERT MARPAT

Colour: BLACK, TAN, GREEN

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 156


Ops Core

VAS Shroud

2010 ACH-ARC Kit & Bungees

LPA-OE-35-99-201

• Snag free for HALO, HAHO and static line • All aluminum construction with powder coated finish and stainless steel ballistic hardware • Fits all ACH, MICH, PASGT and Lightweight Marine Helmets with the MARSOC / WARCOM 3-hole pattern • Fits all FAST Ballistic & FAST Carbon helmets Includes a foam gasket to provide additional stabilization and eliminate any vibration and wobble, better than competitor shrouds • Ideal for replacing the original helmet “hook and strap” mounting system • Can be used for mounting night vision devices (requires night vision mounting arm and NVG goggles, not sold by Ops-Core) • It is the lightest, lowest profile, least obtrusive, & least expensive front shroud solution available

Beware of counterfeit Shrouds. Knockoffs vary in quality; some are plastic, others look identical. These products are not manufactured, tested, approved or guaranteed by Ops-Core Helmet: ACH & FAST, FAST CARBON Colour: TAN, GREEN, BLACK Page: 157

LPA-OE-25-99-301

• Strongest, lowest profile accessory mounting solution for helmets • Improved lower profile version of the 2007 design with added features for the attachment of accessories • Includes lower dove-tail slot for support of O2 mask, goggle, and illuminator devices • Provides instant donning and doffing of mandible and face protection solutions for the ACH • Compatible with a Single Strap O2 Kit as well as Double Strap O2 Kit • Snag free for HALO, HAHO and static line • Uses existing chinstrap mounting holes and is compatible with MSA and Ops-Core chinstraps • Available with or without bungees

Colour: BLACK, TAN, GREEN

ACH Head-Loc™ Retention System H-Nape LPA-OE-07-99-121

The Head-Loc RS was developed to improve safety, comfort and stability of chinstraps used in MICH/ACH ballistic helmets. Every component, down to each stitch pattern, was designed specifically for this purpose, giving the ACH greater utility than ever before. Custom adjustment tabs allow the helmet to be adjusted while wearing it, without any hanging loose ends. Simplified strap geometry makes the system 3X more stable than existing chinstraps. This system has resulted from years of input and testing by some of the most respected operators in the USSOCOM community. Their demanding requirements for NVG stability, multiple environment versatility and overall performance are credit to the design today. Without their help, the Head-Loc chinstrap would not exist. Size : S/M L/XL Colour: GREEN, BLACK, TAN

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Ops Core

ACH Head-Loc™ Retention System X-Nape LPA-OE-09-99-121

• 2X more stable under rotational forces than standard issue system • Patented tabs provide one-handed adjustment while wearing the helmet • Straight force lines and unique design eliminate loose strap ends • Padded leather chin cup and nape pad provide support and protection • Custom webbing W weave has greater durability and ventilation • Available in left-eye dominant (LED) configuration (buckle on right side) • The only chinstrap available in Tan that meets SOF DG2 IR specification • Airborne Certified for USSOCOM

Size : S/M L/XL Colour: GREEN, BLACK, TAN

FAST 02 Single Strap ACH 02 Single Strap LPA-OE-26-99-301

LPA-OE-26-99-201

• Fits Para-Flite PHAOS and Carleton Phantom O2 Masks • Streamlined snag-free design that quickly attaches and releases from the helmet rails • Has a Snap Dragon bayonet buckle with a quick release feature • Head-Loc tabs allow on the fly adjustment for tightening and loosening the fit of the mask

Colour: TAN, FOLIAGE GREEN, BLACK

• Fits Para-Flite PHAOS and Carleton PHANTOM O2 masks • Requires Ops-Core 2010 ACH-ARC Kit mounted onto ACH Helmets • Snaps into the corner buckle receiver on the ACH-ARC rail

• Snapdragon buckle for quick release of O2 mask • Head-Loc Tabs for on-the-fly fit adjustment • Available in Tan, Foliage Green and Black Colour: TAN, FOLIAGE GREEN, BLACK

STABILITY MATTERS : CHINSTRAP COMPARISON

STABLE

OPS-CORE® CHINSTRAP

ABLE UNST

STANDARD CHINSTRAP

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 158


Ops Core

ACH Occ-Dial Liner Kit CBRN Mask Extender LPA-OE-49-99-131

LPA-OE-19-99-101

• Fits ACH / MICH 2000 helmets and ACH / MICH 2002 Gunfighter Cut helmets • Does NOT fit ACH / MICH 2001 Special Forces Side Cut helmet, RBR helmets or any helmet that is not a MICH style helmet with the exact mounting hole pattern • Lightweight, multi-impact, ventilated liner system with repositionable EPP impact pads and LDV closed-cell comfort foam that is not affected by temperature, altitude, or moisture • Pads are pre-molded to the shape of a head no more “flat” blocks • Occ-Dial adjustable fitband with replaceable leather front, nape, and side pads quickly detaches to allow convenient donning and doffing of COMs headsets with internal top headbands • Integrated Head-Loc chinstrap retention system gives helmet 4x more stability than standard issue ACH helmet suspension / retention • Easily installs using existing Velcro hook interior disks and chinstrap mounting holes

CBRN Mask Extender can be used with all Head-Loc™ Retention Systems. It adds 3.5” to the chinstrap, allowing it to fasten over the CBRN mask. The extender is simply attached and removed with one click of the buckle. Colour: TAN, GREEN, BLACK

Fleece Chincup / Extender Cover Sock LPA-OE-81-93-000

• For use with Ops-Core Retention System and Gas Mask Extender when wearing a gas mask • Slides over the chincup or the Extender when they are worn under the chin • Soft fleece provides added comfort and prevents irritation

Colour: BLACK

Size : MEDIUM, LARGE Colour: TAN, GREEN, BLACK Page: 159

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Ops Core

Picatinny Adapter LPA-OE-20-99-103

• Works with the ACH-ARC Kit and the FAST Helmet rails • ACH-ARC Kit includes (2) Picatinnys, FAST Helmets include (1) Picatinny • Use it to mount a variety of headborne accessories to the helmet • Quickly attaches or releases from the rail system

Single Clamp Adapter Wing-Loc Adapter LPA-OE-20-97-103

LPA-OE-20-98-103

• Works with the ACH-ARC Kit and the FAST Helmet rails • Use it to mount lights and cameras to the helmet (ie. VIO POV1 Camera or Surefire E1L Light) • Quickly attaches or releases from the rail system

• Works with the ACH-ARC Kit and the FAST Helmet rails • Use it as a base to mount a variety of headborne accessories to the helmet • Quickly attaches or releases from the rail system

Colour: BLACK

Colour: BLACK

Colour: BLACK

Surefire X300

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 160


Ops Core

Goggle Swivel Clips (36mm or 19mm) LPA-OE-20-95-103

L4-G24

• Weight: 198 grams with hardware

• Works with the ACH-ARC Kit and the FAST Helmet rails to quickly and easily attach goggles to the helmet • Compatible with most tactical goggles (36mm strap width and 19mm strap width) • Provides rotational freedom of motion, without the hassle of hook and loop style attachment • The clips can be mounted to upper or lower dovetails to provide instant and secure attachment of straps, while allowing full rotational range • The shoe can remain in the dovetail once the goggles are removed

Size : 36mm, 19mm

L4-G20

• Weight: 210 grams with hardware

Breakaway Mount for the AN/PVS-21 allows firm attachment of the AN/PVS-21 Goggle to a MICH/ACH helmet using the Ops Core VAS or standard Army Shroud. This NVG mounting system allows the mount to “break away” from the base under a stressed condition, such as prompted by interface during fast roping, maritime operations, hard impact or when entering or exiting mobility platforms. Without the Wilcox breakaway feature, the potential for induced neck injury and NVG breakages.are increased.

Allows firm attachment of a variety of NVGs to a MICH/ACH helmet using a variety of helmet shroud options. This NVG mounting system allows the mount to “break away” from the base under a stressed condition, such as when prompted by interference during fast roping, maritime operations, hard impact or when entering or exiting mobility platforms. Without the Wilcox breakaway feature, the potential for induced neck injury and NVG breakage are increased.

VAS Shroud Compatibility Helmet Compatability Fits the standard MARSOC / WARCOM 3-hole NVD mount pattern NVG & Mount Arm Compatability The Ops-Core VAS Shroud is compatible with the following combinations of night vision goggle and mount arm styles

NVG Style

US Army Standard Mount Arm #A3256368

Wilcox® G09 Mount Arm with Break-Away Base #28300G01

Wilcox® L4 G24 Mount Arm #28300G24

PVS-7B/7D PVS-14 PVS-15 PVS-18 PVS-21 PVS-7A/7C

Page: 161

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Wilcox® L4 G20 Mount Arm #28300G20

Norotos® INVG Mount Arm #1820010

Norotos® AKA2 Mount Arm #1840010


Ops Core

Manta Strobe • Infrared and visible light switching • Weighs 58 grams • Streamlined & lightweight, specifically designed for today’s combat warrior • Positive on/off switch with vibrating motor feedback • Simultaneously depressing side switches changes mode from infrared to overt green, preventing accidental overt light activation • Base plate designed to fit curvature of modern ballistic helmets

Point - MPLS

Remix Pro Headset

Designed to streamline your gear, the Point - MPLS offers powerful LED technology in a virtually weightless package. Simplicity is key with a large, positive feeling push button and a single LED. Mounted practically anywhere, you’ll never need to take your eyes off of your task at hand with the Point - MPLS. Available with White, Red, IR, Green, or Blue LED.

Powered by a single CR123 battery providing excelled performance in cold weather, light weight & compact size. Multiple output modes to meet various requirements, the light starts in low mode. With a large on/off button, an easy access battery door and a reliable asymmetrical bracket, The Remix Pro is equipped to endure the rigors of your next adventure.

Colour: BLACK, OLIVE DRAB, TAN

Colour: BLACK/W, BLACK/G, BLACK/R

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 162


Wilcox

Page: 163

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wilcox

Wilcox is an industry leader in the design and manufacture of high quality tactical equipment for use by the Department of Defense and Federal Agencies within the United States. With knowledge gained by working with the Military, Wilcox has engineered a product line that provides tactical teams with equipment that affords a significant tactical advantage. These and other specialized products are currently being supplied by Wilcox under contract with the U.S. Military, Federal, and other local governmental agencies.

As a supplier of combat proven products, Wilcox pledges to maintain its presence in the marketplace as an innovative company providing value to our customer. We will continue to invest in state-of-theart technologies, allowing us to develop new products to enhance your mission effectiveness. Wilcox is synonymous with products that deliver proven results, unmatched product quality and reliability, and cost effective solutions to complex requirements; a combat multiplier that helps protect our National interest.

Export of Wilcox Industries products is controlled by The U.S. Department of Commerce under Export Administration Regulations (EAR) and the U.S. Department of State, Directorate of Defense Trade Controls, Bureau of Political-Military Affairs, in accordance with 22 U.S.C. 2778-2780 of the Arms Export Control Act (AECA) and the International Traffic in Arms Regulations (ITAR). (22 CFR Parts 120130) regulate our products.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 164


Wilcox

Parachutist Nav Board (Heated) LPA-WX-29105G01

• Multi-adjustable, articulating front plate for mount to the operator with harnesses. • A Release Lever allows for easy access to the GPS unit by means of a hinged Cover. • A heated GPS storage box protects the GPS unit from freezing - capable of accommodating handheld GPS units up to 3.25” W x 6.25” H. • A MA-230 standard Military Altimeter, included with the Nav Board (Heated), features a red backlight for night operations. • A 3 position Power Switch - Low, Off, & High. • Battery Compartment 123 3V Lithium Battery • A standard Ball Compass. Red LED back light can be operated at high or low power and can accommodate a Backup Chem Light. • A MA-230 housing adapter for a back-up mini Chem Light in an emergency situation. • Up to 4 mini Chem Lights can be housed at 3 o’clock, 6 o’clock, 9 o’clock, & 12 o’clock, to provide illumination of the Altimeter in an emergency • Red LED backlight serves as a visual indicator of heater function. When LED backlight turns off, the heater will turn off shortly thereafter. • All components easily used with gloved hands

High Altitude High Opening (HAHO) parachute operations require the use of navigational tools to assist the parachutist with navigating from the predetermined “Opening Point” to the “Point of Impact”. Oftentimes, tactical parachute operations are conducted at extreme high altitude in order to maximize the parachutist standoff distance. Extreme high altitude operations place a higher reliance on Global Positioning Systems (GPS) for navigating from the “Opening Point” to the intended “Point of Impact”. Temperatures at these extreme high altitudes have an adverse affect on the electronic and LED screen of the attached GPS unit and require additional thermal protection. Page: 165

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wilcox

Parachutist Nav Board (Standard) LPA-WX-2800G02

• Features a multi-adjustable, articulating front plate mount for Board to the operator by means of a variety of harnesses. A velcro adhesive assists in securing the front plate to the harness. • An adjustable GPS Storage Housing is capable of accommodating handheld GPS units up to 3.25”W x 6.25” H. • A Ball Compass features a white face and bold black lettering for ease of viewing during night operations. The Ball Compass features a red LED back light that can be operated at high or low power and can accommodate a Backup Chem Light. • A MA-230 housing adapter provides a means for storing and using a back-up mini Chem Light for the Ball Compass in an emergency situation. • A 3 position Power Switch - Low, Off, & High. • Battery Compartment houses a 123 3-Volt Lithium Battery. • A mounting interface provides a means for mounting a digital altimeter (sold separately). • All components can be easily manipulated with gloved hands.

High Altitude High Opening (HAHO) parachute operations require the use of navigational tools to assist the parachutist with navigating form the predetermined “Opening Point” to the “Point of Impact”. Typically, these navigational tools consist of a fixed mounting platform equipped with a compass only. These fixed non-articulation platforms protruded from the parachutist and could cause injury during rough openings and landings.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 166


Wilcox

L4 G42 Low Profile Breakaway Mount LPA-WX-56100G02 LPA-WX-56100G13

The Wilcox L4 G42 Low Profile Breakaway Mount allows firm attachment of a variety of NVGs to a MICH/ACH helmet using Wilcox’s Army Compatible Ratchet Strap with Lanyard. This NVG mounting system allows the mount to “break away” from the base under a stressed condition, such as when prompted by interference during fast roping, maritime operations, hard impact or when entering or exiting mobility platforms. Without the Wilcox breakaway feature, the potential for induced neck injury and NVG breakage are increased. The Wilcox L4 G42 NVG Mounting Systems Product Line is featured with a wide range of adjustments to customize the position of the Night Vision Goggle for proper eye position, and provide a maximum low profile position to the helmet. Dimensions (Operational) 3.98” L x 2.60” W x 2.40” H Weight (G24 Mount Only) .36 lb (5.76 oz) Weight (Ratchet Strap Only) .10 lb (1.6 oz) Material Construction Light Weight, Aerospace Grade Metal Accommodates NVG AN/PVS-7B and 14 (Both Require Optional Hardware) , 7A, 7C, 15, and 18 Vertical Height Adjustment .900” Total Travel Fore/Aft Travel 1.10” Total Travel

Page: 167

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wilcox

Filter Cover

Protective Cover for the AN/PVS-15/18 Front Objective Lens

LPA-WX-34000G01 LPA-WX-3400G03 LPA-WX-34000G04

• Quickly attaches and detaches an array of night vision goggles and scopes • Unique padded rubber eye cup protects Eye Socket from Impact Injury • Amber filter provides tactical advantage, greatly reducing green eye splash common to all NVG devices • Molded rubber eyepiece eliminates NVG light pollution from escaping the eyepiece • Flat matte finish for covertness in combat conditions • Combat proven by the US Special Operations community and domestic law enforcement personnel • Design approach cuts down on logistics and overall system cost

The Wilcox Filter Cover Assemblies feature an amber lens that quickly attaches and detaches a variety of Night Vision Goggles and Scopes.

LPA-WX-56400G01

• Securely covers the NVG lens to prevent scratching and reduce reflection during operation • Replaceable lens insert • Extends the operational life of the NVG • O-Ring prevents moisture from inhibiting clean field of view • Threaded interface separates for easy replacement of lenses

A unique cost effective ring assembly that threads to the interior threaded diameter of the AN/PVS-15 or 18 NVG, providing an anti-reflective and scratch resistant protective cover to the front objective lens. Weight: 0.02 lb (0.009 kg) Material Construction Light Weight, Aerospace Grade Metal, Coated to a Flat Black Color Accommodates NVG Suite AN/PVS-15

One Hole NVG Shroud LPA-WX-56100G03 LPA-WX-56100G14

• Breakaway feature allows mount to break Away under stress, or to securely lock in Place by means of a breakaway lever • NVG lanyard assembly provides secure attachment to an array of NVG devices • Mount pocks into place in both positions • Each mechanical adjustment is durable and Positioned for easy one-handed operation • Provides over-travel in extended position • Maintains a very low profile stance

The Wilcox L4 G37 configuration additionally features a Wilcox Army compatible shroud, and provides easy attachment of the mount to any helmet drilled with a standard one-hole configuration using a single screw and hook assembly. Weight G24 Mount Only .36 lb (5.76 oz) Accommodates NVG AN/PVS-7B and 14 (BothRequire Optional Hardware) 7A, 7C, 15, and 18 Vertical Height Adjustment .900” Fore/Aft Travel 1.10”

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 168


Wilcox

L4 G24 Low Profile Breakaway Mount LPA-WX-28300G24 LPA-WX-28300G25

• Securely covers the NVG lens to prevent Scratching and reduce reflection during operation • Replaceable lens insert • Extends the operational life of the NVG • O-Ring prevents moisture from inhibiting clean field of view • Threaded interface separates for easy replacement of lenses

The L4 G24 Low Profile Breakaway Mount allows firm attachment of a variety of NVGs to a MICH/ACH helmet using a a variety of helmet shroud options. This NVG mounting system allows the mount to “break away” from the base under a stressed condition, such as when prompted by interference during fast roping, maritime operations, hard impact or when entering or exiting mobility platforms. Without the Wilcox breakaway feature, the potential for induced neck injury and NVG breakage are increased. The Wilcox L4 G25 option additionally features an OpsCore VAS Shroud, and provides easy attachment of the mount to any helmet drilled with a standard three-hole configuration. Dimensions (Operational) 3.98” L x 2.60” W x 2.40” H Weight (G24 Mount Only) .36 lb (5.76 oz) Weight (VAS Shroud Only) .10 lb (1.6 oz) Material Construction Light Weight, Aerospace Grade Metal Accommodates NVG AN/PVS-7B and 14 (Both Require Optional Hardware), 7A, 7C, 15, and 18 Vertical Height Adjustment .900” Total Travel Fore/Aft Travel 1.10” Total Travel Page: 169

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wilcox

ANVIS NVG Mount LPA-WX-56500G01 LPA-WX-56500G02 LPA-WX-56500G12 LPA-WX-56500G22

F4949 and F5050 aviator night vision goggles have become popular for use with ground operations because of their low profile stance on the combat helmet and improved aviator grade tube performance. Wilcox’s Line of L4 G01 and G02 ANVIS Mounting Systems integrates existing Army mounting capabilities with Wilcox’s standards for firm attachment of an NVG to a MICH/ ACH helmet. These uniquely designed Mounts feature a battery power source for powering a mounted F5050 (G01 Model) or F4949 (G02 Model) for ground use. Wilcox offers standard army shroud mounting options for one-hole, three-hole, and strap mount mounting to a helmet, and a Head Mount option for mounting to an operator’s head. This unique mount easily integrates with existing inventories of Army shrouds. Dimensions (Operational): G01 Mount 3.00” L x 2.60” W x 1.55” H G02 Mount 3.20” L x 2.60” W x 1.70” H Ops-Core Shroud 3.60” L x 3.90” W x 0.50” H Wilcox Army Shroud 3.20” L x 2.00” W x 0.50” H Wilcox Strap Mount 3.98” L x 2.60” W x 2.40” H Weight: G01 Mount (F5050) 0.32 lb (4.99 oz) G02 Mount (F4949) 0.33 lb (5.29 oz) Ops-Core VAS Shroud 0.10 lb (1.60 oz) Wilcox Army Shroud 0.13 lb (2.12 oz) Wilcox Strap Mount 0.26 lb (4.16 oz) Vertical Height Adjustment: .900” Total Travel Power Source: One (1) CR123 Battery Material Construction: Light Weight, Aerospace Grade Metal Accommodates NVG: F5050 (G01), F4949 (G02) Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 170


Wilcox

Mission Helmet Recording System (MHRS TM - AN/PSH6) for the AN/PVS-14 TM

LPA-WX-43500G01, 43500G04, 43500G03

• Provides thirteen (13) hours of high resolution audio and video imagery • Miniature day/night camera mounts to a dovetail shoe on the dashboard for day operation. For night operation, the camera mounts to an AN/PVS-14 eyecup interface and prism • Miniature audio microphone for audio capture Uniquely designed modular powered track easily secures to the MICH/ACH helmet by means of a patented ratcheting cinch • Dashboard assembly allows the operator to securely mount the MHRS to a MICH/ACH helmet drilled with one or three holes, and allows attachment of an NVG • Wire management system secures cabling • Recorder module provides download (USB) • Maintains a very low profile

The Wilcox Mission Helmet Recording System (MHRS) for the AN/PVS-14 is comprised of a Dashboard Assembly with miniature Day and Night Camera Module, Quick Change TM Power Supply Module, and Miniature Video and Audio Recorder that all mount to a MICH/ACH helmet by means of a powered track. This unique track carries power from a Quick Change TM Power Supply Module to the mounted devices. Mounted Weight (1 Battery Pack) with Battery 2.00 lb (32.0 oz) without Battery 1.92 lb (30.7 oz) Storage Capacity Shipped with 16 Gb CF Card Color Video Length Up to 13 Hrs Total with Audio Maximum File Size per Video 3.8 Gb Audio Only Length Up to 130 Hours Total Page: 171

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wilcox

L4 G29 Breakaway Mount with Ops-Core Shroud for LUCIE NVG LPA-WX-28300G29

• Breakaway feature allows mount to break away under stress, or to securely lock in place by means of a breakaway lever • Each mechanical adjustment is durable and ergonomically positioned for easy onehanded operation while handling a weapon • Maintains a low profile stance on helmet

The Wilcox L4 G29 Breakaway Mount for the LUCIE NVG with Ops-Core Shroud allows firm attachment of the LUCIE Goggle to a MICH/ACH helmet using an OpsCore VAS or standard Army shroud. This NVG mounting system allows the mount to “break away” from the base under a stressed condition, such as when prompted by interference during fast roping, maritime operations, hard impact or when entering or exiting mobility platforms. Without the Wilcox breakaway feature, the potential for induced neck injury and NVG breakage are increased. The Ops-Core Shroud provides easy attachment of the mount to any helmet drilled with a standard three-hole configuration. Dimensions (Operational) 3.95” L x 2.50” W x 3.10” H Weight (G29 Mount Only) .42 lb (6.72 oz) Weight (VAS Shroud Only) .10 lb (1.6 oz) Accommodates NVG LUCIE Vertical Height Adj. .870” Total Travel Fore/Aft Travel 0.90” Total Travel

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 172


Wilcox

PATRIOT® Land Based Hybrid Life Support System for CBRN LPA-WX-20000G00LL18W26L LPA-WX-20000G00SS18W26L LPA-WX-20000G00LTCGA18W26L

• Delivers blower or non–blower assisted filtered air (PAPR) or open circuit breathing gas (SCBA) in one integrated system • Can function as an air purifying respirator (APR) or supplied air respirator (SAR) • Delivers up to 71 minutes of open circuit air and seven (7) hours of battery life supply power to the blower System • Increases time on target • Able to withstand a variety of contaminants • Chemically hardened components allow the operator to wear the PATRIOT externally of currently used level 1 containment suits, simplifying the decontamination and recharging procedure • Air supply is rechargeable within two (2) minutes at 4,500 PSI • Manufactured of chemically hardened high strength polycarbonate materials and aircraft aluminum, flat black hard–coated

The PATRIOT is a modular, state of the art Land Based Hybrid Life Support System that allows an individual to operate in containment levels (masked up) for an unprecedented eight (8) hours before performing service. Performance levels may vary depending on ambient temperature, the type of filter cartridge, contamination levels, and filter life. Positive pressure air is delivered from the PATRIOT, utilizing the principle of a clean room, but within the operator’s mask. If the facial seal is broken, clean air continues to feed the operator. The positive pressure also works as an anti–fog system, providing assistance in keeping the mask clear, allowing an improved field of view than offered by traditional breathing systems. Page: 173

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wilcox

Mini Cutting Torch System with 95 Cu In Cylinder & CGA Charging Port LPA-WX-40400G03

• Allows the breacher to melt or burn through objects for gaining entry to secured or confined spaces. • Utilizes torching rods of various lengths to generate an exothermic burn. • Polycarbonate handle resists the heat generated by the high temperatures of exothermic operation. • Carry pouch is black for covert use. • Green oxygen supply hose conforms to DOT color coding standards for oxygen products.

The Wilcox line of Mini Cutting Torch Systems utilizes oxygen as a fuel source to perform utility cutting. These torch systems provides an expedient alternative when other methods of breaching are inappropriate for technical or tactical reasons. This system features a distinct advantage over competitor products in that they are very light weight, low profile, and scalable to meet a variety of mission requirements. It also easily integrates with the Wilcox Portable Oxygen Supply System (sold seperately) for easy on-site cascade charging to accommodate larger jobs. Weight: (with Oxygen): 40400G03 8.42 lbs. 40400G04 6.21 lbs. Dimensions: 40400G03 4.14in. DIA x 19.5in. H 40400G04 3.52in. DIA x 11.0in. H Cylinder Capacity (3,000 PSI): 40400G03 11.3 cu. ft. (325.0 L) 40400G04 6.66 cu. ft. (190.5 L)

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 174


Wilcox

Wilcox Weapon Grips LPA-WX-41900G11 PARA GRIP LPA-WX-46200G01 STEADY GRIP LPA-WX-46200G02 CONTROL GRIP BIPOD FEATURES OF PARA & STEADY GRIP • Grip is ribbed vertically and horizontally to prevent slippage during weapons fire • Optional removable bipod extends with the push of a button and easily collapses • Optional removable battery stowage compartment in place of the bipod providing stowage for two (2) 123A batteries • Flats located left and right of the grip allow attachment of remote connector cables (Sold separately) for controlling a variety of lasers and tactical flashlights

ADDED FEATURES OF UNIVERSAL GRIP • New integrated electronic design eliminates strip switches that interfere with operation for which the vertical grip is intended • Simple pre-select for flashlight, laser, or flashlight and laser • Provides momentary or constant activation • Ergonomically positioned activation buttons located on left or right side allow for Control of the flashlight and laser without losing grip during operation

Weight (without Batteries): 41900G01 0.44 lb (7.04 oz) 41900G04 0.34 lb (5.44 oz) 46200G01 0.42 lb (6.72 oz) 46200G04 0.32 lb (5.12 oz) 46200G02 0.63 lb (10.14 oz) 46200G03 0.42 lb (6.72 oz) Dimensions (Collapsed): 41900G01 5.1” L x 1.9” W x 1.5” D 41900G04 5.0” L x 1.9” W x 1.5” D 46200G01 6.0” L x 1.6” W x 1.5” D 46200G04 5.6” L x 1.6” W x 1.5” D 46200G02 6.6” L x 1.6” W x 2.4” D 46200G03 6.2” L x 1.6” W x 2.4” D Page: 175

The Wilcox line of weapon grips feature a patented mounting interface which allows for quick attachment to the MIL-STD-1913 rail. This line features non-powered grips; one with a steady mount, and one with a collapsible mount that stows below the weapon rail. A Universal Control Grip provides unsurpassed control of a variety of weapon mounted lasers and tactical flashlights by eliminating the need for a strip switch to control the illumination device and laser attached to the weapon. All grips are available with and without an integrated bipod.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wilcox

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 176


Wild Things Tactical

Page: 177

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wild Things Tactical

In the early 1980’s, John Bouchard and Marie Meunier founded an alpine gear company called Wild Things. Their mantra was Light is Right. Their calling was to climb. Generations of climbers who followed their path ascended into some of the world’s wildest places. Of course, the climbs and the climbers are now the stuff of legend, inspiration for the next group to realize the freedom of moving over rock and ice in a fast and light way. The rest, three decades of elation, misery, epics, and near misses, we put back into everything we make. For those with the steel to scale ridges towards unseen summits, set their sights on distant peaks, or to jump into the unknown as far as they can, STAY WILD. The world’s most demanding users choose Wild Things for the world’s most demanding conditions. We are a collection of seasoned climbers, outdoor enthusiasts, and career military that test every item we make against the highest of standards to ensure

that our users are well protected against the elements, everywhere and anywhere. Each piece we sell is individually made in the USA using the latest technology in a factory with more than 30 years of outerwear experience. The combination of continuous design and innovation, in tandem with cutting edge technology and traditional craftsmanship, makes Wild Things a truly unique outdoor technical apparel company. In use, our products fade into the background to let the user focus on the task at hand. The user shouldn’ t notice our clothing across the broader spectrum of conditions. We want our users to focus on the climb, the descent, the hike, or whatever outdoor activity they are doing. For the warfighter, this characteristic allows him or her to give 100% attention to the

mission. This is not a recreational activity, but potentially a matter of life and death for them and national security for us. Our products let them do their jobs, and help get them home safely. WT Tactical by Wild Things, LLC leverages our alpine experience to create extraordinary products to meet the needs of the military and law enforcement Wild Things has been making mountaineering apparel and gear for 29 years, and products for the US military for nearly that long. Under WT Tactical, Wild Things has fulfilled over 25 military contracts, from large program business to smaller unit level sales tailored to meet specific mission goals. WT Tactical has a reputation for rapid prototype development, a design discipline forged from personal experience and direct user feedback, and high quality, reliable production.

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 178


Wild Things Tactical

Hard Shell Jacket LPA-WL-50008-60052 • • • • • • • • • • •

3-layer eVent® waterproof/breathable shell Fully seam sealed interior Waterproof concealed zippers Bicep storage pockets on both arms Interior mesh storage pockets Two-way pit zips Fully adjustable helmet compatible hood Velcro® wrist stays with half elastic Shock cord hem with concealed adjustment Slightly dropped tail 2” x 3” Velcro® patches on both sleeves

Designed to be worn over body armor, our Hard Shell Jacket is specifically engineered to keep you and your protective gear dry. Made of 3-layer eVent® waterproof/ breathable fabric, this technical hard shell jacket remains light for quick movement.

Hard Shell Pants LPA-WL-50034-60034

• 3-layer eVent® waterproof/breathable shell • Zipper/button fly closure • Adjustable waistband with Velcro® side tabs, belt loops, and elastic back • Interior suspender loops • 2 cargo pockets, concealed waterproof zipps • Hem-to-knee hidden waterproof side zipps • Articulated knees • Hem grommets for optional boot straps

Our Hard Shell Pants are made of 3-layer eVent® waterproof/breathable fabric, and are seam sealed on the interior to ensure water repellency. The pants have a zipper/ button fly closure to keep these pants as comfortable and as familiar as possible. Size : S-XXL Colour: MULTICAM

Size : S-XXL Colour: MULTICAM

Page: 179

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wild Things Tactical

Low Loft Jacket

High Loft Jacket

LPA-WL-50021-60036

LPA-WL-50023-60050

• 70 denier textured nylon shell • Nylon rip stop lining quilted to 2 oz PrimaLoft® synthetic insulation • Concealed hand warmer pockets • 7” bicep storage pockets • Elasticized rear hem • 2” x 3” Velcro® patches on sleeves • Dropped tail

The latest version of our Low Loft Jacket updates the sleeve with abrasion resistant panels from the elbow to the cuff. Extremely strong with plenty of stretch, this new style will allow you to get down on your elbows frequently without wearing through the sleeve. Size : S-XXL Colour: MULTICAM, BLACK, COYOTE, OD GREEN

• 70 denier textured nylon shell • 330d Cordura® reinforced elbows • Nylon rip stop lining quilted to 6 oz PrimaLoft® Sport synthetic insulation • Hand warmer pockets lined with 2 oz PrimaLoft® synthetic insulation • Two interior mesh storage pockets • Shock cord hem adjustable from within hand warmer pockets • Fully adjustable helmet compatible hood • Fully insulated gaiter collar (stays up) • Velcro® wrist stays with half elastic • 2” x 3” Velcro® patches on sleeves MultiCam® • Dropped tail

Designed to be worn over body armor, the High Loft Jacket provides ultimate warmth, featuring 6 oz PrimaLoft® Sport synthetic insulation. The shell is made of 70 denier textured nylon, with 330d Cordura® reinforced abrasion resistant panels on the elbows.

High Loft Pants LPA-WL-50043-60043

• 70 denier textured nylon shell • 4 oz PrimaLoft® synthetic insulation • 330d Cordura® reinforced rear, knees, and instep • Elasticized waist with wide belt loops • Interior suspender loops • Zippered fly with snap/Velcro® closure • Articulated knees • Full side seam zippers • Hem grommets for boot straps

Freezing temperatures can’ t penetrate our High Loft Pants, designed to withstand even the coldest temperatures using 4 oz of PrimaLoft® Sport synthetic insulation. The shell is made of 70 denier textured nylon, which has no sheen and makes very little noise. 330d Cordura® reinforces the rear, knees and instep. Size : XS-XXL Colour: MULTICAM, BLACK, COYOTE, OD GREEN

Size : S-XXL Colour: MULTICAM, BLACK, COYOTE, OD GREEN Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 180


Wild Things Tactical

Soft Shell Jacket Lightweight LPA-WL-50005-60044 • • • • • •

Lightweight soft shell fabric Full front zip Two inset sleeve pockets Zippered hand pockets with mesh pocket bags Nylon rip stop stow-away hood 2” x 3” Velcro® patches on sleeves (MultiCam® only) • Dropped tail

Wild Things Tactical Lightweight Soft Shell Jacket provides second-skin protection. The jacket is made of a unique plain weave, offering extreme strength and abrasion resistance with plenty of stretch. The user can count on excellent water repellency and wind resistance from this nylon/spandex fabric’s tight weave. Size : M-XXL Colour: MULTICAM, BLACK, COYOTE, OD GREEN

Soft Shell Pants Lightweight LPA-WL-50035-60035 • • • • • •

Lightweight soft shell fabric Crotch gusset Articulated knees Two thigh cargo pockets Five wide belt loops Zippered hems

Wild Things Tactical Soft Shell Pants are made of a unique plain weave offering extreme strength and abrasion resistance with plenty of stretch. The user can count on excellent water repellency and wind resistance from this nylon/spandex fabric’s tight weave. The crotch gusset and articulated knees enhance mobility without adding extra seams or bulk. Size : M-XXL Colour: MULTICAM, BLACK, COYOTE, OD GREEN

Soft Shell Jacket LPA-WL-50007-60029

• Tweave heavy weight soft shell fabric bonded to hydrophobic polyester fleece • Full front zip • Pit zips • Two inset sleeve pockets • Zippered hand pockets, mesh pocket bags • Nylon rip stop stow-away hood • 2” x 3” Velcro® patches on sleeves (standard with MultiCam pattern only) • Dropped tail

The Soft Shell Jacket combines secondskin protection with the high degree of functionality one would expect of a tactical piece. The body is made of a four-way stretch nylon/spandex blended fabric bonded to hydrophobic polyester fleece, maintaining the high stretch and memory characteristics of a soft shell, while adding the warmth and comfort of fleece. A high collar protects the neck from the elements, and a full zip front entry allows this jacket to come on and off easily. Size : M-XXL Colour: MULTICAM, BLACK, COYOTE

Page: 181

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wild Things Tactical

Wind Shirt - WT 1.0 LPA-WL-50152-50150

• 70 denier textured nylon shell encapsulated with silicone in a proprietary process that provides durable water resistance, abrasion resistance, and breathability • ½ zip pullover • One angled chest pocket • Concealed zippers • Adjustable shock cord hem • Stow-away hood • Elastic wrist closures • Dropped tail

Wild Things Tactical breathable windshirt provides exceptional protection from wind and rain. The unique collar design provides full neck protection and, with a half zip front opening, the piece slides over the head easily. A minimally constructed, articulated stow-away hood fits the head snugly, allowing a helmet to be worn over it. Features include elasticized sleeve cuffs, an adjustable hem, & an angled chest pocket.

Wind Pants - WT 1.0 LPA-WL-50033-60033

• 70 denier textured nylon shell encapsulated with silicone in a proprietary process that provides durable water resistance, abrasion resistance, and breathability • Elasticized adjustable waistband • Two hand pockets • One back pocket • 18” side zipper

Our breathable wind pants pack small to protect you on the go and provide exceptional protection from wind and rain. Function and comfort are key. With an elasticized adjustable waistband and 18” side zippers, getting these pants on quickly over boots will not be an issue. Features include two hand pockets and one back pocket. Size : M-XXL Colour: MULTICAM, BLACK, COYOTE, OD GREEN

Size : M-XXL Colour : MULTICAM, BLACK, COYOTE, OD GREEN Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 182


Wild Things Tactical

Andinista Pack

Shelter - Waterproof

LPA-WL-50176

LPA-WL-50033-60033

• • • • • • • • • • • • • • • • •

Composite VX-21 fabric (200p.s.i waterproof) Padded, angled shoulder straps 2 gear loops on padded, removable hip belt Compression zippers Removable compression straps Whistle-lock on sternum strap Hydration system compatible Tool tubes Crampon straps Ski slots 2 daisy chains 4 haul points Centered ice axe loop Contour-cut removable lid Removable back pad Roll-up snow skirt Volume: 3000 c.i. (49 liters) fully compressed to 5500 c.i. (90 liters) expanded • 3 lbs 8 oz without the bivy pad

• • • • •

70 denier ripstop nylon Reinforced grommets along four sides Waterproof Weight: 1 lb 8 oz Size: 72” x 96”

Made from durable, waterproof 70 denier ripstop nylon with reinforced grommets along each edge. Construct a versatile, lightweight shelter or integrate the Shelter with our quilted Shelter Liner (sold separately) to provide bivy-sack protection. Colour: MULTICAM

Shelter Liner - Quilted LPA-WL-50033-60033

• Soft 70 denier nylon treated with NanoSphere® DWR • Quilted to 2 oz PrimaLoft synthetic insulation • Multiple tie-downs along 4 sides • Weight: 2 lb 6.8 oz • Size: 72” x 96”

Made from soft 70 denier nylon treated with NanoSphere® DWR quilted to 2 oz PrimaLoft synthetic insulation, the Shelter Liner is a lightweight, packable, insulated blanket. Multiple tie-downs allow the Shelter Liner to integrate with our Waterproof Shelter (sold separately) to create a warm and dry emergency shelter system. Colour: MULTICAM

The combination of lightweight, durable materials and intelligent design has made the Andinista the premier, most sought-after alpine mountaineering pack in the world. Colour: COYOTE Page: 183

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


Wild Things Tactical

High Loft Booties USMC High Loft Pants USMC High Loft Jacket USMC LPA-WL-50047 • • • • •

LPA-WL-50040

EPIC by Nextec® shell 6oz PrimaLoft® insulation Wool lined inner sole Draw cord ankle closure 1000d Cordura® outer sole

• EPIC by Nextec® Shell • 4 oz PrimaLoft® insulation • Full side zipper with flap

Designed with the same materials as the High Loft Jacket - USMC 1.0, the High Loft Booties (Happy Booties) are the perfect boot for camp or sleep. Fully insulated with draw cord ankle closures, these booties feature a wool lined inner sole and a 1000d Cordura outer sole and are meant to be worn on their own, not as an overshoe. Size : XL Colour: COYOTE

Designed to provide maximum comfort in extreme cold weather, the High Loft Pants USMC 1.0 (Happy Pants) is a superior outer layer. The pants are cut large to fit over several layers of clothing and body armor. The shell material is a microfiber that is impregnated with a thin layer of silicone. This material is lightweight, windproof, highly water resistant, and breathable. The added silicone also enhances abrasion resistance. The pants feature a full side zip, allowing maximum ventilation and ease in taking pants on or off over boots. The waist is fully adjustable with a hook and loop system, and suspender loops are included. We have added 330 denier Cordura® nylon reinforcement panels in the seat and knees. Size : S/SHORT -X/LONG Colour: COYOTE

LPA-WL-50020 • • • • • • •

EPIC by Nextec® shell 6 oz PrimaLoft® insulation Stow-away hood Full Separating zipper with front flap Velcro® wrist stays with half elastic 2” x 3” Velcro® patches on sleeves Dropped tail

The jacket is designed to enhance comfort and performance in extreme cold conditions, eliminating all unnecessary features. Insulated with PrimaLoft® Sport synthetic insulation, the jacket is lightweight, compressible and keeps the wearer warm even when wet. We put 6 oz PrimaLoft® in the body and 2 oz in the hood to insure comfort even in the coldest conditions. The sleeves feature 330 denier Cordura nylon reinforcement panels just where you need them. The hood and waist openings are elasticized with barrel lock closures, making gloved adjustment a snap. Size : M/REG - XL/LONG Colour: COYOTE

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 184


CONTENTS

 

. . . . . . . . . . . . . . . . . . . . . . . . . . . 20 . . . . . . . . . . . . . . . . . . . . . . . 103 5 in 1 Jacket. . . . . . . . . . . . . . . . . . . . . . . . . . . 20 6.6 Med Pouch . . . . . . . . . . . . . . . . . . . . . . . . . 38 6.6 Padded Pouch . . . . . . . . . . . . . . . . . . . . . . . 38 6.6 Pouch (Vertical) . .. .. .. .. .. .. .. .. .. .. . 38 6.10 Pouch (Vertical) . . . . . . . . . . . . . . . . . . . . . 37 10.6 Pouch . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 10.6 Pouch . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 10 Round Limiter™. . . . . . . . . . . . . . . . . . . . . . . 103 2010 ACH-ARC Kit & Bungees . . . . . . . . . . . . . . . 157 2011 CBR X A. .. .. .. .. .. .. .. .. .. .. .. .. . 62 ACH 02 Single Strap . . . . . . . . . . . . . . . . . . . . . 158 ACH Head-Loc™ Retention System H-Nape . . . . . . . 157 ACH Head-Loc™ Retention System X-Nape . . . . . . . 158 ACH Occ-Dial Liner Kit . . . . . . . . . . . . . . . . . . . 159 ACS™ Carbine Stock . . . . . . . . . . . . . . . . . . . . . 108 ACS™ QD Swivel Sling Mount . . . . . . . . . . . . . . . 112 Adjustable Stock - G3 Model . .. .. .. .. .. .. .. 111 A Frame Assault Goggle. . . . . . . . . . . . . . . . . . . 138 Aggressor Parka . .. .. .. .. .. .. .. .. .. .. .. . 22 AirFlex Combat Knee Pad . .. .. .. .. .. .. .. .. . 78 AirFlex Field Knee Pad . .. .. .. .. .. .. .. .. .. . 78 AirFlex Field Elbow Pad . . . . . . . . . . . . . . . . . . . 78 AirFrame Chops . .. .. .. .. .. .. .. .. .. .. .. . 90 AirFrame Ears . . . . . . . . . . . . . . . . . . . . . . . . . 90 AirFrame Helmet . .. .. .. .. .. .. .. .. .. .. .. . 89 AirFrame Helmet . . . . . . . . . . . . . . . . . . . . . . . 90 AirFrame Rails . . . . . . . . . . . . . . . . . . . . . . . . . 90 Albaron Jacket Men . .. .. .. .. .. .. .. .. .. .. 122 All Weather Combat Pants . .. .. .. .. .. .. .. .. . 73 All Weather Combat Shirt. . . . . . . . . . . . . . . . . . . 74 All Weather SI Boot . .. .. .. .. .. .. .. .. .. .. 142 Ambush™ . .. .. .. .. .. .. .. .. .. .. .. .. .. . 58 Andinista Pack . . . . . . . . . . . . . . . . . . . . . . . . . 183 Anti-Grav . .. .. .. .. .. .. .. .. .. .. .. .. .. . 53 ANVIS NVG Mount . .. .. .. .. .. .. .. .. .. .. 170 ASAP® Ambidextrous Sling Attachment Point . .. .. 116 ATAC 6” Boot . .. .. .. .. .. .. .. .. .. .. .. .. . 26 ATAC 8” Side Zip . .. .. .. .. .. .. .. .. .. .. .. . 25 3 in 1 Parka

5 Round Limiter™

Page: 185

. . . . . . . . . . . . . . . 27 . .. .. .. .. .. .. .. .. .. .. .. .. . 29 ATAC Shield CSA/ASTM . . . . . . . . . . . . . . . . . . . 26 ATAC Storm Boot. .. .. .. .. .. .. .. .. .. .. .. . 25 Ayako Jacket . . . . . . . . . . . . . . . . . . . . . . . . . 122 Backup Belt System. . . . . . . . . . . . . . . . . . . . . . . 35 B.A.D. Lever® . . . . . . . . . . . . . . . . . . . . . . . . . 117 Bail Out Bag . .. .. .. .. .. .. .. .. .. .. .. .. . 33 Basic Single Point Static Sling . .. .. .. .. .. .. .. . 47 Battery Assist Device - AR15/M16 . . . . . . . . . . . . . 117 Belt Side Sleeves . . . . . . . . . . . . . . . . . . . . . . . 84 Best Selling T-Shirt. . . . . . . . . . . . . . . . . . . . . . . 12 BFM™ . .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 57 BLEND IN Tee . . . . . . . . . . . . . . . . . . . . . . . . . 97 Board (Heated). . . . . . . . . . . . . . . . . . . . . . . . . 165 Board (Standard) . . . . . . . . . . . . . . . . . . . . . . . 166 Böker Applegate-Fairbairn fighting Desert Knife. . . . . 53 Böker Arbolito . . . . . . . . . . . . . . . . . . . . . . . . . 54 Böker Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Böker Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 C3 Case - S (Small Phone) . .. .. .. .. .. .. .. .. . 39 C4 Case (Blackberry) . . . . . . . . . . . . . . . . . . . . . 39 C5 Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 CAGE Armor Chassis . . . . . . . . . . . . . . . . . . . . . 79 CAGE Plate Carrier (CPC) . .. .. .. .. .. .. .. .. . 80 CAMS 40” Outbound . . . . . . . . . . . . . . . . . . . . . 43 Carrier (JPC) . .. .. .. .. .. .. .. .. .. .. .. .. . 81 CBRN Mask Extender. . . . . . . . . . . . . . . . . . . . . 159 Chameleon Soft Shell . . . . . . . . . . . . . . . . . . . . . 19 Chassis StKSS Adapter . .. .. .. .. .. .. .. .. .. . 92 Cold Weather. .. .. .. .. .. .. .. .. .. .. .. .. . 64 Combat Elbow Pad. . . . . . . . . . . . . . . . . . . . . . . 78 Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Covert 18 Backpack . .. .. .. .. .. .. .. .. .. .. . 34 Covert Cargo Pant. . . . . . . . . . . . . . . . . . . . . . . 10 Covert Casual Shirt. . . . . . . . . . . . . . . . . . . . . . . 15 Covert Dress Shirt . . . . . . . . . . . . . . . . . . . . . . . 15 Covert Fleece Jacket . . . . . . . . . . . . . . . . . . . . . 21 CPC Side Soft Armor Insert. .. .. .. .. .. .. .. .. . 87 CPC Stretch Mag Pouch . . . . . . . . . . . . . . . . . . . 95 ATAC Boot : Layers of comfort

ATAC Gloves

. . . . . . . . . . . . . . . . . . . . . . . . . . . 97 . .. .. .. .. .. .. .. .. .. .. .. .. 137 CTR® Carbine Stock . . . . . . . . . . . . . . . . . . . . . 107 Cuff Case (Blackberry) . .. .. .. .. .. .. .. .. .. . 40 DC Roller Travel Bag . . . . . . . . . . . . . . . . . . . . . 43 Defender 250 . .. .. .. .. .. .. .. .. .. .. .. .. . 85 Defender 500 . .. .. .. .. .. .. .. .. .. .. .. .. . 85 Defender 550 . .. .. .. .. .. .. .. .. .. .. .. .. . 85 Double Duty TDU Belt. . . . . . . . . . . . . . . . . . . . . 16 Double Rifle Case . . . . . . . . . . . . . . . . . . . . . . . 45 Drop Pouches. .. .. .. .. .. .. .. .. .. .. .. .. . 40 Elbow Pad . .. .. .. .. .. .. .. .. .. .. .. .. .. . 78 Elias Jacket . .. .. .. .. .. .. .. .. .. .. .. .. 122 EMAG 30 MAGLEVEL. . . . . . . . . . . . . . . . . . . . . 101 Executive Field Case iPhone 4 . .. .. .. .. .. .. .. 118 Exskelibur II . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 EXTERIOR Mounting System . . . . . . . . . . . . . . . . . 155 Extra Charging Base UC3.400 . .. .. .. .. .. .. .. . 48 FAST 02 Single Strap . . . . . . . . . . . . . . . . . . . . . 158 Fastac 2 Glove. . . . . . . . . . . . . . . . . . . . . . . . . 28 FAST Ballistic High Cut . .. .. .. .. .. .. .. .. .. 153 FAST Base Jump MIL . . . . . . . . . . . . . . . . . . . . . 153 FAST Base Jump SP . .. .. .. .. .. .. .. .. .. .. 154 FAST Carbon Helmet . . . . . . . . . . . . . . . . . . . . . 153 Fastmits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Field Case . .. .. .. .. .. .. .. .. .. .. .. .. .. 118 Field Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . 63 FieldShell. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 77 Filter Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Flak Jacket Nosepiece Kit . .. .. .. .. .. .. .. .. 147 Flash Bang Pouch . . . . . . . . . . . . . . . . . . . . . . . 40 Flashlight PC3.300. . . . . . . . . . . . . . . . . . . . . . . 48 Flashlight UC3.400. . . . . . . . . . . . . . . . . . . . . . . 48 Fleece Chincup / Extender Cover Sock. . . . . . . . . . . 159 Flow Meter™ . .. .. .. .. .. .. .. .. .. .. .. .. . 61 FN SCAR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 FR Fast Rope Glove . .. .. .. .. .. .. .. .. .. .. 144 Friction Fighter™ NT . . . . . . . . . . . . . . . . . . . . . 64 FR Magnum Force™ Long . .. .. .. .. .. .. .. .. . 66 G3 Combat Pants . . . . . . . . . . . . . . . . . . . . . . . 69 CP Logo Tee

Crosshair 2.0

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


CONTENTS



. .. .. .. .. .. .. .. .. .. .. .. . 70 G3 Field Pants . . . . . . . . . . . . . . . . . . . . . . . . . 72 G3 Field Shirt . .. .. .. .. .. .. .. .. .. .. .. .. . 71 G3 Range Vest. . . . . . . . . . . . . . . . . . . . . . . . . 75 Glacier Pants . .. .. .. .. .. .. .. .. .. .. .. .. 124 Goggle Swivel Clips (36mm or 19mm). . . . . . . . . . . 161 GRIP CORE AA/AAA BATTERY STORAGE . .. .. .. 113 GRIP CORE BOLT & FIRING PIN STORAGE . . . . . . . 114 GRIP CORE CR123 BATTERY STORAGE . . . . . . . . . 113 GRIP CORE MIAD ARID/SR25 WEDGE . .. .. .. .. 114 Groove™ .6L . .. .. .. .. .. .. .. .. .. .. .. .. . 63 Groove™ Filters . .. .. .. .. .. .. .. .. .. .. .. . 63 GunClip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Gunsight Mandible. . . . . . . . . . . . . . . . . . . . . . . 156 GUNS KILL hippies Tee. .. .. .. .. .. .. .. .. .. . 97 H20 Carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Half Jacket/Flak Jacket Array Case . .. .. .. .. .. 150 Hard Shell Jacket . . . . . . . . . . . . . . . . . . . . . . . 179 Hard Shell Pants . .. .. .. .. .. .. .. .. .. .. .. 179 Hard Time Glove . . . . . . . . . . . . . . . . . . . . . . . 28 H.A.W.G ® . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Heat Grip CT™. . . . . . . . . . . . . . . . . . . . . . . . . 64 High Back Belt . . . . . . . . . . . . . . . . . . . . . . . . . 82 High Back Belt Soft Armor Insert . .. .. .. .. .. .. . 88 High Back BLAST Belt. . . . . . . . . . . . . . . . . . . . . 82 High Loft Booties USMC . . . . . . . . . . . . . . . . . . . 184 High Loft Jacket . .. .. .. .. .. .. .. .. .. .. .. 180 High Loft Jacket USMC . .. .. .. .. .. .. .. .. .. 184 High Loft Pants. . . . . . . . . . . . . . . . . . . . . . . . . 180 High Loft Pants USMC. . . . . . . . . . . . . . . . . . . . . 184 Hi-Tech Impact II CT™. . . . . . . . . . . . . . . . . . . . . 65 Holster Shirt. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 HRT Titanium Watch . . . . . . . . . . . . . . . . . . . . . 49 HRT Urban Boot . .. .. .. .. .. .. .. .. .. .. .. . 26 Impact CT™. . . . . . . . . . . . . . . . . . . . . . . . . . . 65 iPhone 3G/3GS. . . . . . . . . . . . . . . . . . . . . . . . . 118 Jacket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Jumpable Plate . . . . . . . . . . . . . . . . . . . . . . . . . 81 Kala Pattar Pull. . . . . . . . . . . . . . . . . . . . . . . . . 123 Kit Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 G3 Combat Shirt

. . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Knee Pad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 L4-G20 . .. .. .. .. .. .. .. .. .. .. .. .. .. .. 161 L4-G24 . .. .. .. .. .. .. .. .. .. .. .. .. .. .. 161 L4 G24 Low Profile Breakaway Mount. . . . . . . . . . . 169 L4 G29 Breakaway Mount, OC Shroud, LUCIE NVG. 172 L4 G42 Low Profile Breakaway Mount. . . . . . . . . . . 167 Lap Panel . .. .. .. .. .. .. .. .. .. .. .. .. .. . 87 Large Soft Vault. . . . . . . . . . . . . . . . . . . . . . . . . 149 LBE Vest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Lens Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . 148 Level 1 Socks . .. .. .. .. .. .. .. .. .. .. .. .. . 23 Light for Life . .. .. .. .. .. .. .. .. .. .. .. .. . 48 Light for Life . .. .. .. .. .. .. .. .. .. .. .. .. . 48 Lightweight FR Glove . . . . . . . . . . . . . . . . . . . . . 143 Linchpin™ . .. .. .. .. .. .. .. .. .. .. .. .. .. . 57 Lined Packable. . . . . . . . . . . . . . . . . . . . . . . . . 21 Logo-Shirt (Mammut) . . . . . . . . . . . . . . . . . . . . . 124 Longsleeve All-Year . . . . . . . . . . . . . . . . . . . . . 123 Loose Fit Undergear . . . . . . . . . . . . . . . . . . . . . 13 Low Loft Jacket . .. .. .. .. .. .. .. .. .. .. .. . 180 Low Profile Belt. . . . . . . . . . . . . . . . . . . . . . . . . 83 Low Profile Belt Soft Armor Insert . .. .. .. .. .. .. . 88 Low Profile BLAST Belt . .. .. .. .. .. .. .. .. .. . 83 LSA Terrain Boot . .. .. .. .. .. .. .. .. .. .. .. 142 LSA Water Boot. . . . . . . . . . . . . . . . . . . . . . . . . 142 MagClip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Magnum Black Spear Pocket Knife. . . . . . . . . . . . . 54 Magnum Force™. .. .. .. .. .. .. .. .. .. .. .. . 65 MAGPUL 5.56MM / 7.62MM / 9MM . . . . . . . . . . . 104 Manta Strobe . .. .. .. .. .. .. .. .. .. .. .. .. 162 Max Grip NT . .. .. .. .. .. .. .. .. .. .. .. .. . 66 MBUS® - Magpul® Back-Up Sight -Front GEN 2 . .. 105 Messenger Bag . .. .. .. .. .. .. .. .. .. .. .. . 42 M Frame 2.0 Earsock/Nosepiece Kit . .. .. .. .. .. 147 M Frame Nosepiece Kit . . . . . . . . . . . . . . . . . . . 147 (MHRS TM - AN/PSH-6) for the AN/PVS-14 . . . . . . . 171 MIAD GRIP AR15/M16 . .. .. .. .. .. .. .. .. .. 113 Micro Bag 5 Pack . . . . . . . . . . . . . . . . . . . . . . . 150 Mini Cutting Torch System Charging Port . . . . . . . . . 174 Kitchen Sink

. . . . . . . . . . . 171 Mission Ready . . . . . . . . . . . . . . . . . . . . . . . . . 42 MLI Mug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 MLI Stickers. . . . . . . . . . . . . . . . . . . . . . . . . . . 98 MLI Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 MLI™ Emblem Buckle. . . . . . . . . . . . . . . . . . . . . 98 MOE® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 MOE® Carbine Stock - Mil-Spec Model . . . . . . . . . 106 MOE® Grip AR15/M16 . . . . . . . . . . . . . . . . . . . 114 MOE HAND GAURDS . .. .. .. .. .. .. .. .. .. 115 MOE® Trigger Guard, Polymer – AR15/M16. . . . . . . 117 MOLLE Zip-On Panel. . . . . . . . . . . . . . . . . . . . . 91 Motherlobe . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 MS2™ - Multi Mission Sling System. . . . . . . . . . . . . 116 Multicam Products. . . . . . . . . . . . . . . . . . . . . . . . 8 Muscle Mapping Shirt. . . . . . . . . . . . . . . . . . . . . 14 Nanoclear Lens Cleaner + Hydrophobic Kit . . . . . . . 148 O2011 CBR X Reservoir . . . . . . . . . . . . . . . . . . . 62 OMEGA® Water Beast . .. .. .. .. .. .. .. .. .. . 62 One Hole NVG Shroud . . . . . . . . . . . . . . . . . . . 168 Operator Belt . .. .. .. .. .. .. .. .. .. .. .. .. . 16 Packaway Pants. . . . . . . . . . . . . . . . . . . . . . . . . 124 PACK Zip-On Panel . .. .. .. .. .. .. .. .. .. .. . 91 Padded Sling . .. .. .. .. .. .. .. .. .. .. .. .. . 47 Padded Sling . .. .. .. .. .. .. .. .. .. .. .. .. . 49 Panel Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Parachutist Nav . .. .. .. .. .. .. .. .. .. .. .. 166 Parachutist Nav. . . . . . . . . . . . . . . . . . . . . . . . . 165 PATRIOT® Hybrid Life Support System CBRN . .. .. 173 Patrol Rain Pant. . . . . . . . . . . . . . . . . . . . . . . . . 21 Patrol Short . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Payload Duffel . . . . . . . . . . . . . . . . . . . . . . . . . 146 Peltor Headset . . . . . . . . . . . . . . . . . . . . . . . . . 156 Picatinny Adapter . . . . . . . . . . . . . . . . . . . . . . . 160 Pistol Magazine Pouches. . . . . . . . . . . . . . . . . . . 35 Platebag Soft Armor Insert . .. .. .. .. .. .. .. .. . 88 PMAG 20 . .. .. .. .. .. .. .. .. .. .. .. .. .. 102 PMAG 20LR. . . . . . . . . . . . . . . . . . . . . . . . . . . 102 PMAG 30 . .. .. .. .. .. .. .. .. .. .. .. .. .. 101 PMAG 30G MAGLEVEL . . . . . . . . . . . . . . . . . . . 102



Mission Helmet Recording System TM

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 186


CONTENTS

 

. . . . . . . . . . . . . . . . . . . . . 101 . .. .. .. .. .. .. .. .. .. .. .. 103 Pocket Knife. . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Point - MPLS. . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Polymer Rail Section. .. .. .. .. .. .. .. .. .. .. 115 POUCH Zip-On Panel. . . . . . . . . . . . . . . . . . . . . 91 Praetorian 2 Gloves . .. .. .. .. .. .. .. .. .. .. . 29 Professional Polo . . . . . . . . . . . . . . . . . . . . . . . 17 Professional T’s. . . . . . . . . . . . . . . . . . . . . . . . . 12 Protective Cover for the AN/PVS-15/18 Front Obj. Lens.168 PRS2™ Precision . .. .. .. .. .. .. .. .. .. .. .. 111 PRS® Precision-Adjustable Stock . .. .. .. .. .. .. 110 Push Pack . .. .. .. .. .. .. .. .. .. .. .. .. .. . 42 Rail Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Rail Sling Attachment . . . . . . . . . . . . . . . . . . . . . 116 Range Qualifier Bag . . . . . . . . . . . . . . . . . . . . . 44 Range Ready Bag . . . . . . . . . . . . . . . . . . . . . . . 44 Rapid Assult Shirt . . . . . . . . . . . . . . . . . . . . . . . 11 Remix Pro Headset. . . . . . . . . . . . . . . . . . . . . . . 162 Response Jacket . .. .. .. .. .. .. .. .. .. .. .. . 20 Rifle Mag Pouches . .. .. .. .. .. .. .. .. .. .. . 35 Roll-Up Dump Pouch . . . . . . . . . . . . . . . . . . . . . 95 RSA™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 RUSH 12 Backpack . .. .. .. .. .. .. .. .. .. .. . 32 RUSH 24 Backpack . .. .. .. .. .. .. .. .. .. .. . 32 RUSH 72 Backpack . .. .. .. .. .. .. .. .. .. .. . 32 RUSH Delivery . . . . . . . . . . . . . . . . . . . . . . . . . 42 RUSH MOAB6 . . . . . . . . . . . . . . . . . . . . . . . . . 41 RUSH MOAB10. . . . . . . . . . . . . . . . . . . . . . . . . 41 Rush Tier System . . . . . . . . . . . . . . . . . . . . . . . 41 Sabre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Sabre Jacket. . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Scene One Gloves. . . . . . . . . . . . . . . . . . . . . . . 30 Shelter Liner - Quilted . .. .. .. .. .. .. .. .. .. 183 Shelter - Waterproof . . . . . . . . . . . . . . . . . . . . . 183 Shock Mitigation System Insoles. . . . . . . . . . . . . . . 23 Shoelaces . .. .. .. .. .. .. .. .. .. .. .. .. .. . 23 Shooter’s Cap – CP Logo. . . . . . . . . . . . . . . . . . . 96 Shooter’s Cap – MLI . .. .. .. .. .. .. .. .. .. .. . 96 Shooter’s Cap – Velcro . .. .. .. .. .. .. .. .. .. . 96 Short Sleeve Polo . . . . . . . . . . . . . . . . . . . . . . . 17 PMAG 30 MAGLEVEL

PMAG RANGER

Page: 187

. . . . . . . . . . . . . . . . . . . . . . . . . 87 . .. .. .. .. .. .. .. .. .. .. .. 140 SI Assault Boot 6” . . . . . . . . . . . . . . . . . . . . . . . 141 SI Assault Boot 8” . . . . . . . . . . . . . . . . . . . . . . . 141 SI Assault Gloves . . . . . . . . . . . . . . . . . . . . . . . 143 SI Assault Shoe. . . . . . . . . . . . . . . . . . . . . . . . . 141 SI Ballistic Fan Goggle . .. .. .. .. .. .. .. .. .. 138 SI Ballistic Goggle. . . . . . . . . . . . . . . . . . . . . . . 138 SI Ballistic Goggle 3-Array Case . .. .. .. .. .. .. 150 SI Ballistic M Frame 2.0 Strike Array . . . . . . . . . . . 127 SI Ballistic M Frame 2.0 Strike HYBRID . .. .. .. .. 127 SI Ballistic M Frame 2.0 Strike STRIKE . . . . . . . . . . . 127 SI Ballistic M Frame Strike 3 Array . . . . . . . . . . . . . 128 Side Plate . .. .. .. .. .. .. .. .. .. .. .. .. .. . 85 Side-Pull Mag Pouch . . . . . . . . . . . . . . . . . . . . . 95 Side Trip BriefCase. . . . . . . . . . . . . . . . . . . . . . . 44 SI Fives Squared . .. .. .. .. .. .. .. .. .. .. .. 133 SI Fives Squared . .. .. .. .. .. .. .. .. .. .. .. 136 SI Flak Jacket . .. .. .. .. .. .. .. .. .. .. .. .. 134 SI FLAK JACKET . .. .. .. .. .. .. .. .. .. .. .. 130 SI Flak Jacket XLI . . . . . . . . . . . . . . . . . . . . . . . 134 SI Flak Jacket XLI Desert . . . . . . . . . . . . . . . . . . . 134 SI FLAK JACKET XLJ. .. .. .. .. .. .. .. .. .. .. 130 SI Gascan . .. .. .. .. .. .. .. .. .. .. .. .. .. 132 SI Gascan . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 SI Gascan S. . . . . . . . . . . . . . . . . . . . . . . . . . . 132 SI Gascan S. . . . . . . . . . . . . . . . . . . . . . . . . . . 136 SI Gatling 8” Boot . . . . . . . . . . . . . . . . . . . . . . . 139 SI Half Jacket . .. .. .. .. .. .. .. .. .. .. .. .. 130 SI Half Jacket . .. .. .. .. .. .. .. .. .. .. .. .. 135 SI Half Jacket 3 Lens Array . . . . . . . . . . . . . . . . . 131 SI Half Jacket XLJ . . . . . . . . . . . . . . . . . . . . . . . 135 SI Half Jacket XLJ 3 Lens Array. . . . . . . . . . . . . . . 131 SI Hot Weather Assault Boot 6” . . . . . . . . . . . . . . . 139 SI Hot Weather Assault Boot 8” . . . . . . . . . . . . . . . 139 SI M Frame HYBRID 3 Lens Array . . . . . . . . . . . . . 129 SI M Frame Hybrid S . . . . . . . . . . . . . . . . . . . . . 128 SI M Frame Strike . . . . . . . . . . . . . . . . . . . . . . . 128 SI Minute 2.0 . .. .. .. .. .. .. .. .. .. .. .. .. 133 SI Monster Dog. . . . . . . . . . . . . . . . . . . . . . . . . 132 Single Clamp Adapter. . . . . . . . . . . . . . . . . . . . . 160 Shoulder Plate

SI Approach Mid

. .. .. .. .. .. .. .. .. .. .. .. . 45 . . . . . . . . . . . . . . . . . . . . . . . 46 SI Sand/Wind/Dust Goggle . . . . . . . . . . . . . . . . . 137 SI Splinter . .. .. .. .. .. .. .. .. .. .. .. .. .. 137 SI Straight Jacket. .. .. .. .. .. .. .. .. .. .. .. 133 SI Straight Jacket . . . . . . . . . . . . . . . . . . . . . . . 136 SI Tactical FR Glove . .. .. .. .. .. .. .. .. .. .. 143 SI Temperate Weather Assault Boot 6”. . . . . . . . . . . 140 SI Temperate Weather Assault Boot 8”. . . . . . . . . . . 140 SI Transition SOLFX™ Half Jacket XLJ. . . . . . . . . . . 131 Skull Crusher . .. .. .. .. .. .. .. .. .. .. .. .. 154 Small Soft Vault. . . . . . . . . . . . . . . . . . . . . . . . . 149 Soft Shell Jacket . .. .. .. .. .. .. .. .. .. .. .. 181 Soft Shell Jacket - Lightweight . . . . . . . . . . . . . . . 181 Soft Shell Pants - Lightweight . .. .. .. .. .. .. .. 181 SOMS Outbound Bag . .. .. .. .. .. .. .. .. .. . 43 Special Make-Ups (SMU). . . . . . . . . . . . . . . . . . . . 8 Sports Brief . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SSG Selector Set . . . . . . . . . . . . . . . . . . . . . . . 117 Station Grip. . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Stealth . .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 59 StKSS Load System. . . . . . . . . . . . . . . . . . . . . . . 92 Storm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Strobe/GPS Pouch . . . . . . . . . . . . . . . . . . . . . . . 39 Summer Socks . . . . . . . . . . . . . . . . . . . . . . . . . 23 Summit Longsleeve. . . . . . . . . . . . . . . . . . . . . . . 123 Suspenders . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 TAC A2 Gloves. . . . . . . . . . . . . . . . . . . . . . . . . 31 Tac AK2 Gloves . .. .. .. .. .. .. .. .. .. .. .. . 30 TAC AKL Gloves . .. .. .. .. .. .. .. .. .. .. .. . 29 Tac Dry Rain Shell. . . . . . . . . . . . . . . . . . . . . . . 19 Taclite 2 Gloves . .. .. .. .. .. .. .. .. .. .. .. . 28 Taclite Boots. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Taclite Coyote Boot . .. .. .. .. .. .. .. .. .. .. . 24 Taclite Side Zip Boot . . . . . . . . . . . . . . . . . . . . . 25 Taclite™ Pro Long Sleeve Shirt . . . . . . . . . . . . . . . 18 Taclite™ Pro Pants. . . . . . . . . . . . . . . . . . . . . . . . 9 Taclite™ Pro Shorts . .. .. .. .. .. .. .. .. .. .. .. 9 Taclite™ Pro Short Sleeve . .. .. .. .. .. .. .. .. . 17 Taclite™ TDU™ Pants. . . . . . . . . . . . . . . . . . . . . . 9 Taclite Trainer Low. . . . . . . . . . . . . . . . . . . . . . . 24 Single Gun Case

Single Pistol Case

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686


CONTENTS



. . . . . . . . . . . . . . . . . . . . . . . 24 TAC NFO2 Gloves. . . . . . . . . . . . . . . . . . . . . . . 30 Tactical Shirt. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Tactical Shirt. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Tactical Vest. . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Tanana Jacket Men . .. .. .. .. .. .. .. .. .. .. 121 TDU Belt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 TDU Shirt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 TDU™ Pants. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Technical Windproof Combat Smock . . . . . . . . . . . . 5 Thermal Control Kit™. . . . . . . . . . . . . . . . . . . . . 61 ThermoBak® 3L. . . . . . . . . . . . . . . . . . . . . . . . . 59 Thigh Rig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Thumbdrive Drop & Offset Kit . . . . . . . . . . . . . . . 46 Tight Crew Short Sleeve Shirt. . . . . . . . . . . . . . . . . 14 Timberwolf Wood . .. .. .. .. .. .. .. .. .. .. . 54 Torso Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Torso Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Trainer Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 TriZip™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Tube Trap™. . . . . . . . . . . . . . . . . . . . . . . . . . . 61 UBR™ Collapsible Stock . . . . . . . . . . . . . . . . . . . 109 UBR™ QD Swivel Sling Mount . . . . . . . . . . . . . . . 112 Ultimate Pro Jacket . .. .. .. .. .. .. .. .. .. .. 121 Uniform Hat. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Up-Armor Side Covers Ballistic. . . . . . . . . . . . . . . 156 Urban Assault XL™. . . . . . . . . . . . . . . . . . . . . . . 60 Urban Transport . .. .. .. .. .. .. .. .. .. .. .. . 60 VAS Shroud. . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Vertical Computer Bag . .. .. .. .. .. .. .. .. .. 145 VisorLites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 VTAC 2 Point Sling. . . . . . . . . . . . . . . . . . . . . . . 47 Watch Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Wilcox Weapon Grips. . . . . . . . . . . . . . . . . . . . . 175 WindLiner . .. .. .. .. .. .. .. .. .. .. .. .. .. . 76 Wind Pants - WT 1.0. .. .. .. .. .. .. .. .. .. .. 182 Wind Shirt - WT 1.0 . .. .. .. .. .. .. .. .. .. .. 182 Wing-Loc Adapter. . . . . . . . . . . . . . . . . . . . . . . 160 Winter Leggings . .. .. .. .. .. .. .. .. .. .. .. . 13 XPRT Tactical Boot 8” . . . . . . . . . . . . . . . . . . . . . 27 XTM™ . .. .. .. .. .. .. .. .. .. .. .. .. .. .. 115



Taclite Trainer Mid

Level Peaks Associates : Hereford : www.levelpeaks.com : (01432) 341 686

Page: 188


W W W.NF TO.CO M

www.levelpeaks.com Level Peaks Associates The Warehouse, Gwynne Street, Hereford HR4 9DL info@levelpeaks.com | +44 (0)1432 341 686


Level Peaks Associates Catalogue Issue 1