Issuu on Google+

LED Technologies Designers and Manufacturers

Product Catalogue No 5 Automotive Marine Industrial

Excellence in Lighting Solutions

Products made in Australia and Taiwan


LED Technologies sets precedence The Federal Court of Australia recently handed down a decision in the case of LED Technologies Pty Ltd v Elecspess Pty Ltd, Ren Pty Ltd, Olsen Pty Ltd and Advanced Automotive Australia Pty Ltd, which highlights the benefit of obtaining design registrations for any new products. The case was also one of the first to consider the infringement test under the new Designs Act 2003. LED Technologies is a manufacturer and importer of automotive LED products. It developed and designed a new and distinctive looking square shaped automotive tail lamp which it manufactured in Taiwan and obtained Design Registrations. Elecspess obtained a similar looking but not identical product made in China with the brand name of ''CONDOR'' and offered it for sale in Australia. LED Technologies Pty Ltd brought an action against Elecspess and other's for design infringement. Justice Gordon of the Federal Court of Australia ruled in favour of LED Technologies and issued injunctions for the prevention of further sales and awarding $200,000 in damages with legal cost's expected to be up to $1,200,000. In her judgment, Justice Gordon considered and found that any product which embodied designs that are substantially similar in overall impression to a registered design would infringe the design registrations. The product does not have to be identical to the design registration. In assessing the similarities, the Court would only have regard to the visible features of the design and would do this by looking at both the infringing product and the registered design. Accordingly, the material used to manufacture the product or the inner workings of the product is irrelevant for design infringement purposes. On appeal three Federal court Judges, Justice Jessup, Justice Besanko and Justice Emmett dismissed the appeal by Elecspess, Ren, Olsen and Advance Automotive appeal from Justice Gordon’s ruling that it had infringed LED Technologies registered design. This is the first substantive decision by a Full Court on the new Designs Act introduced in 2003 and provides a guideline and reference for any future design infringement cases. Owner of LED Technologies Tony Ottobre’s comments were, this is a fantastic result for all designers of original products who can now use this case as a precedence and a blow for product copiers. 2

Information Correct at time of printing


Australian Personnel

European Personnel

Taiwanese Partners

Austrailian warehouse and distribution

Australian assembly line

Taiwanese Assembly Plant and Testing Equipment

Ultra sonic welding

Vibration welding

Beam adjustment

Air tight testing

Screw fastening

Glue supply system

Epoxy glue system

Hot melt glue

Glue dispenser

Laser engraving

DISCLAIMER LED Technologies Pty. Ltd. have made every effort to ensure that the information contained in this catalogue is correct and accurate; current information should be checked at the time of placing an order and before any manufacturing/installation is to be commenced. Measurements provided are accurate at the time of publication; we advise measurements should be confirmed before final decisions/installations are made. LED Technologies Pty. Ltd. reserves the right to improve, modify, make dimensional design and technical changes or discontinue or update designs without prior notice; although we will take all measures to inform our customers if and when possible of any changes made. LED Technologies Pty. Ltd. will not accept liability of any kind due to misuse or abuse of any products not used as intended. Date of Printing April 2011

Information Correct at time of printing

3


Made in Melbourne

A U S T R A L IA MaXiLED

Rear combination Go to Page 18

A First for Australian Manufacturing.

The First LED rear combination lamp made in Australia.

Unconditional 5 Year Warranty.

ADR compliant for Horizontal and Vertical applications

LED Technologies, manufacturers of LED Autolamps, have begun manufacturing the all new MaXiLED Stop/Tail/Indicator and Reverse lamp. A first in Australia and certified to proudly carry the “Made in Australia” logo. Using only quality components and plastics sourced from overseas suppliers and utilizing our own full SMD/component assembly line to fit out, solder and testing of circuit boards. The finished boards are then fitted to the base, fully potted and sealed against water and dust ingress then assembled with specially designed chrome inner reflectors, honey comb designed lens with reflex reflectors. The finished lamps are then fully tested and packaged into the LED Autolamps blister clamshells. Australian designed Premium components SMD LEDs Multi voltage High quality plastics Superior sealing methods Fully submersible Intelligent manufacturing Manufacturing control Quality control Tests exceeds standards

creating the 4

future in lighting

Information Correct at time of printing


Information Correct at time of printing

5


Large Trailer Harness System LED Technologies has developed an 8 wire cable system to suit any Truck Trailer world wide, we have also manufactured and patented a plug ring to make the complete system waterproof. The T piece is a magnificent product manufactured with a PCB - 8 pins going in, 6 pins left and 6 pins right going out. Encased in a hardened PVC plastic which is resistant to fire and water. The main cable is 9mm in diameter and comes in various lengths from 6 meters to 15 meters, each cable has a junction box in the middle of its length which provides plugs for the side direction indicator and for side marker lamps, at one end there is an 8 pin plug which connects to the T piece, at the other end there are 8 coloured wires for connection to the main trailer plug. Both left and right cables are 1.2m long and have up to six wires that connect to the rear combination. This cable is 9mm in diameter with a 6 pin plug which also has our round and square marker plugs to suit our marker lamp system.

Red Stop White Earth Pink Reverse Blue Fog or Accessory Brown RHS Tail Green RHS Indicator Yellow LHS Indicator Black LHS Tail

W N EDUCT PRO

Part Numbers and Product Description 8PTP 6PR1.2 6PL1.2 8P6 8P9 8P12 8P15

T piece RHS Plug & cable LHS Plug & cable 6 metre main cable 9 metre main cable 12 metre main cable 15 metre main cable

Available products with the Large Trailer harness system

Lumilamp see page 29

Quad Square Series see page 24

MaXilamps see page 30-31

J3 Series see page 19

6

Information Correct at time of printing


Marker Lamp Harness System LED Technologies has developed a 2 wire cable system for marker lamps and licence plate lamps, we have included 4 types of markers with this system which gives you a choice of which marker to use. The simplicity of this system is that there is no cutting splicing or joining of wires, we have developed two plugs, one round for earth and one square for power. Included is a T piece with round and square plugs - the entire system is fool proof, because you cant fit a round plug into a square hole and vice versa. The cable lengths vary from 1 metre to 5 metres and whenever you need to add a marker or licence lamp just add the T piece. All plugs and T piece are made from PVC which is fire and water resistant. We also developed a special water proof patented ring and as it suggests the whole system is water proof with a rating of IP67.

Part Numbers and Product Description 2CPT 2C100 2C200 2C300 2C400 2C500

T piece 1 metre 2 pin cable 2 metre 2 pin cable 3 metre 2 pin cable 4 metre 2 pin cable 5 metre 2 pin cable

Available products with the marker lamp harness system

44 Series see page 48

36 Series see page 44

35 Series see page 44

58 Series see page 45

W N EDUCT PRO

Information Correct at time of printing

35 Series Licence plate see page 52

7


ADR

ADR Minimum Requirements The requirements specified in the ADRs for the performance and installation of lamps and reflectors are based on international standards. The performance requirements usually involve tests done in a laboratory to show compliance. Trailer manufacturers must ensure that the lamps and reflectors fitted to their trailers comply with these performance requirements. Lamps on a trailer must not show red light to the front or white light to the rear. Two front position lamps showing white light to the front of the trailer must be fitted to trailers which are more than 1600 mm wide. Two rear position lamps showing red light to the rear must be fitted to each trailer. One rear registration plate lamp must be fitted to each trailer. Two stop lamps showing red light to the rear must be fitted to the trailer. Two direction indicator lamps showing amber light to the rear must be fitted to the rear of each trailer. The flashing rate of the indicators must be within the range of 60 to 120 flashes per minute. Two end-outline marker lamps showing white light to the front and two lamps showing red light to the rear must be fitted to trailers more than 2.1 metres wide. Two side marker lamps showing amber light to the front and red light to the rear must be fitted on each side of trailers over 2.1 metres wide or having a total length over 7.5 metres. If a trailer is over 7.5 metres in total length an additional side marker lamp must be fitted on each side midway between the front and the rear lamps. If a trailer such as a boat trailer has no structure at the front and at the rear to which end-outline marker lamps can be attached then fitting one end-outline marker lamp midway on each side is acceptable. Reflex reflectors are reflectors of a conventional lens type and must comply with ADR 47/00. Two white reflectors must be fitted to the front of each trailer. The number of amber coloured side reflex reflectors that must be fitted to each side of a trailer depends on the total length of the trailer including its draw bar. At least one reflector must be fitted to the middle third of the total trailer length. There must be a reflector within 3 metres of the front of the trailer and a reflector within 1 metre of the rear of the trailer. The distance between adjacent reflectors must not exceed 3 metres. Two reflectors which reflect red light to the rear must be fitted to the rear of each trailer. The ADR Installation of Lighting and Light-signalling Devices is available at the RVCS website at www. rvcs-prodweb.dot.gov.au Click on the Australian design rules tab and click on the ADR 13/00 document.

8

Information Correct at time of printing


ADR 49/00 Front End Outline Lamps

ADR 45/01 or ADR 74/00 Side Marker Lamps

ADR 48/00 Licence Plate Lamps

ADR 49/00 Stop Lamps

ADR 49/00 Front Position Lamps ADR 47/00 Front Reflex Reflectors

ADR 47/00 Side Reflex Reflectors

ADR 49/00 Rear Position Lamp

ADR 47/00 Rear Reflex Reflectors

ADR 49/00 Rear End Outline Lamps

ADR 6/00 Cat. 2 Rear Direction Indicator Lamps

ADR 1/00 Reversing Lamps

Information Correct at time of printing

ADR 6/00 Cat. 5 or Cat. 6 Supplementary Side Direction Indicator Lamps ADR 6/00 Cat. 1 Front Direction Indicator Lamps

9


TABLE OF CONTENTS

10

Pages

Rear Combination Lamps 14-31

SQUARE lamps

RECTANGLE LAMPS

34-35

STRIP LAMPS

32-35

RECESS LAMPS 36-37

ROUND LAMPS

OBLONG LAMPS

42

FRONT INDICATOR LAMPS

43

MARKER LAMPS

LICENCE PLATE LAMPS

52

MARINE LAMPS

53

WORK LAMPS

54-57

EXTERIOR LAMPS

58-59

INTERIOR LAMPS

59-62

CAT 6 SIDE DIRECTION INDICATOR

63

CARAVAN DOOR ENTRY

64

HAND LAMPS

64

COLOURED LAMPS

EMERGENCY LAMPS

EMERGENCY BEACONS

TRAFFIC SIGNAL LAMPS

71

DAYTIME RUNNING LAMPS

72

YELLOW LIGHT LAMPS

73

33

38-41

44-51

65-66 67 68-70

REFLECTORS

74

FLASH UNITS

75

CONVERTERS

76

PILOT LAMPS

76

LOAD RESISTORS

76

PROMOTIONAL PRODUCTS

77-78

MERCHANDISERS AND DISPLAYS

79-86

WARRANTY, RETURN FOR CREDIT FORM

Information Correct at time of printing

87


PRODUCT NUMBER AND PAGE Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

100AM

33

1061/Opaque

60

135ARM

28

148BW12

61

100AMB

33

10CB

60

135ARMG

28

148GW12

61

100ARM

15

110AM

38

135BKT

29

148WW12

61

100ARM10

15

110AMB

38

135BKT-1

35

1490AM

48

100B1B

33

110RM

38

135CARRM

29

1490RM

48

100B1BB

33

110RMB

38

135CARWML

29

1490WM

48

100B1C

33

110WM

38

135CARWMR

29

1491AM

48

100B3BB

23

110WMB

38

135CAT1

43

1491RM

48

100B3CB

23

111AM

68

135CAT124

43

1491WM

48

100B3WB

23

111RM

68

135CAT1G

43

150ARM

15

100B4BB

24

111WM

68

135G

35

150ARM10

15

100BAARRM

24

112ABM

68

135RM

35

150BAR

15

100BAR

15

112RBM

68

135RMG

35

150BAR10

15

100BAR10

15

125AM

33

135WM

35

150BAR2

15

100BAR2

15

125AMB

33

135WMG

35

150BARB

15

100BARB

15

125B1B

33

1369A

50

150BARLP2

15

100BARLP2

15

125B1C

33

1369R

50

151BAR

14

100BARRM

23

125B3BB

23

1374A

49

151BAR10

14

100BARRWM

24

125B3C

23

1374R

49

151BAR2

14

100BARWM

23

125BARML

21

1388A

49

151BARLP

14

100BSTIM

20

125BARMR

21

1388R

49

151BARLP2

14

100CARRM

23

125BARRM

23

1388W

49

1685AB

50

100CARWM

23

125BARWM

23

140STILM

29

1685AM

50

100CSTIM

20

125CARRM

23

140STIM

29

1685RB

50

100RM

33

125CARWM

23

143120B12

59

175AW

43

100RMB

33

125RM

33

143120B24

59

181AME

51

100WM

33

125RMB

33

143120C12

59

181RME

51

100WMB

33

125WM

33

143120C24

59

181WME

51

1004ARM

51

125WMB

33

143120G12

59

182AM

69

1004L

51

12571

49

143120G24

59

182RM

69

1004R

51

12572

49

143120W12

59

182WM

69

10121

60

12611

49

143120W24

59

200B1B

34

10121/24

60

12612

49

143ILB12

59

200B1C

34

10121/24Opaque

60

12761

51

143ILB24

59

200B2B

34

10121/Opaque

60

12781

51

143ILC12

59

200B2C

34

1016

60

127AMF

69

143ILC24

59

200B3B

34

1016/24

60

127RMF

69

143ILG12

59

200B3C

34

1016/24Opaque

60

127BMF

69

143ILG24

59

200BAAAM

34

1016/Opaque

60

127GMF

69

143ILW12

59

200BAAM

34

101BAR

14

127AMM

69

143ILW24

59

200BAM

34

101BAR10

14

127WMM

69

143RWB

53

200BAMB

34

101BAR2

14

1282A

50

143RWW

53

200BARLM4

26

101BARLP

14

1282R

50

1440A

49

200BARLPM2

25

101BARLP2

14

1284A

50

1440R

49

200BARM

25

102A

38

1284R

50

1440W

49

200BARM4

26

102AC

38

130AM

37

1458AM

50

200BARM6

26

102AM

38

130AMB

37

1458ARM

50

200BARRM

26

102R

38

130RM

37

1458BC

50

200BARWM

26

102RC

38

130RM-1

37

1458RM

50

200BKT4

26

102RM

38

130RMB

37

1458WM

50

200BKT6

26

102W

38

130RMB-1

37

1459A

49

200BRM

34

102WM

38

130WM

37

1459R

49

200BRMB

34

1031

60

131RM

36

1474A

49

200BRRM

34

1031/24

60

131CRM

36

1474R

49

200BRRRM

34

1031/24Opaque

60

131AM

36

1474W

49

200BRWM

25

1031/Opaque

60

131CAM

36

1477A

51

200BSTIM

25

1061

60

131WM

36

1477R

51

200BSTIMB

25

1061/24

60

135AM

35

1479A

51

200BSTIR48

25

1061/24Opaque

60

135AMG

35

1479R

51

200BSTIRMB

25

Information Correct at time of printing

11


Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

200BWM

34

305G12

65

38ARMBKTR

47

50SRM

66

200BWMB

34

305R12

65

38ARMMB

47

50SWM

66

200CAAAM

34

305W12

65

38BB

46-47

5100W12

58

200CAM

34

30BLM

52

38CAM

46

5100W24

58

200CARM

25

30CLM

52

38CARM

46

52CG

53

200CARRM

26

312482C

62

38CARMB

46

52CR

53

200CARWM

26

312482W

62

38CB

46-47

52CW

53

200CAW

43

3591

51

38CRM

46

52WG

53

200CAW/24

43

35AM

44,64

38CWM

46

52WR

53

200CRM

34

35AM2

44

38RM

46

52WW

53

200CRRRM

34

35AMB

44

38RMB

46

53101

38-39

200CSTIM

25

35ARM

44

38RMBKT

47

53101B

38-39

200CWM

34

35ARM2

44

38RMMB

47

53101C

38-39

207A12

34

35ARMB

44

38WM

46

53101H

38-39

207BAR4

26

35BB

44

38WMB

46

53102

36-39

207BAR6

26

35BC

44

38WMBKT

47

53102H

36-39

207BARL

25

35BCB

44

38WMMB

47

54101

42

207BARL4

26

35BL

52

380A12

32

5437A

41

207BARLP2

25

35BLM

52

380A24

32

5437R

41

207BARP

25

35BLM1P

52

380BAR

28

5437W

41

207R12

34

35BLM6

52

380BB

35

5503A

42

235A12

32

35BLMB

52

380CA12

35

5503R

42

235A24

32

35BLMB2P

7

380CAR

28

5505W

42

235BAR12

28

35BM

64

380CB

35

55062

42

235BB

28

35BW

44

380CEL

63

5513A

40

235CAR12

28

35CAM

44

380CR12

35

5513R

40

235CB

28

35CAMB

44

380R12

32

5513W

40

235R12

32

35CARM

44

380R24

32

5523A

39

235R24

32

35CARMB

44

380W12

32

5523R

39

235W12

32

35CL

52

380W24

32

5525W

39

235W24

32

35CLM

52

380WB

35

5526A

70

235WAR12

28

35CLMB

52

380WEL

63

5533A

42

235WB

28

35CRM

44

42AMB

45

5533R

42

240152C

62

35CRMB

44

42ARMB

45

5535W

42

240152W

62

35CWM

44

42CAMB

45

5543A

41

250ARWM

18

35CWMB

44

42CARMB

45

5543FA

40

250ARWMB

18

35GM

64

42CRMB

45

5543FR

40

250RARM

18

35PM

64

42CWMB

45

5543FW

40

250RARMB

18

35RM

44, 64

42RMB

45

5543R

41

275ARM

16

35RM2

44

42WMB

45

5543W

41

275BAR

16

35RMB

44

44AME

48

5563A

42

275BAR2

16

35WM

44, 64

44AMEB

48

5563R

42

275BARB

16

35WM2

44

44AMEB2P

7

5563W

42

275GARWM

18

35WMB

44

44RME

48

5570A

39

275RARWM

18

35YM

64

44RMEB2P

48

5570R

39

25A12

32

36AM

44

44WME

48

5570W

39

25R12

32

36RM

44

44WMEB2P

48

5575A

39

25W12

32

36ARM

44

44WAME

48

5575R

39

2C100/2

7

36WM

44

44WRME

48

5575W

39

2C100B10

7

36CAM

44

44WWME

48

5585A

40

2C200/2

7

36CRM

44

4C110C

17

5585R

40

2C200B10

7

36CARM

44

4C130C

17

5585W

40

2C300/2

7

36CWM

44

4C150C

17

5590AM

36

2C300B10

7

38AM

46

4C170C

17

5590RM

36

2C30B10

7

38AMB

46

4C190C

17

5590WM

36

2C400B

7

38AMBKT

47

4C210C

17

58AM

45

2C500B

7

38AMMB

47

4C30B

17

58AM3

45

2PT10

7

38ARM

46

4C320B

17

58AMB

45

2PT2

7

38ARMB

46

50SAM

66

58AMB2P

7

305A12

65

38ARMBKT

47

50SBM

66

58AMEB

7

305B12

65

38ARMBKTB

47

50SGM

66

58ARM

45

12

Information Correct at time of printing


Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

MaXilamp1XRE

17 17 17 17 17 85 85 85 85 63 63 19 19 19 19 19 19 19 27 27 27 27 27 27 27 52 15 15 14 15 15 14 52 75 75 29 29 29 31 30

Maxilamp3XC

31

MaxiLamp3XCW

31

MaXilamp3XR

30

MaXilamp3XRB

30

Maxilamp3XRR

30

MaxiLamp5XC

31

MaxiLamp5XCW

31

MaXilamp5XR

30

MaXilamp5XRB

30

Maxilamp5XRR

30

PLA12

75

PLB12

75

PLG12

75

PLR12

75

PLW12

75

SFU1

74

58ARM3

45

68W

65

80B2BB

21

BC1000

58ARMB

45

68Y

65

80B2C

21

BC1200

58ARMB2P

7

7030A

73

80B3B

22

BC600

58CAM

45

7030AB

73

80B3BB

22

BC800

58CAM3

45

7030R

73

80B3C

22

BCC1

58CAMB

45

7030R-1

73

80B3CB

22

DB1

58CARM

45

7030RB

73

80B3SKT

22

DB2

58CARM3

45

7030W

73

80B4BB

23

DB3

58CARMB

45

7030WB

73

80BAARRM

24

DB4

58CRM

45

7035A

73

80BAR

21

HH1061/12

58CRMB

45

7035AB

73

80BARM

21

HH1061/240

58CWM

45

7035R

73

80BARR

22

J3AM

58CWM3

45

7035RB

73

80BARRM

22

J3B3B

58CWMB

45

7035W

73

80BARRWM

24

J3BARRM

58RM

45

7035WB

73

80BARRSKT

22

J3BARWM

58RM3

45

7150BM

54

80BARW

22

J3BRRRM

58RMB

45

7150WM

54

80BARWM

22

J3RM

58RMB2P

7

7208MR

56

80BARWSKT

22

J3WM

58WM

45

7208MS

56

80BKT

22

J9B9B

58WM3

45

7210M

56

80BSTIM

20

J9B9C

58WMB

45

7220M

56

80BSTIMB

20

J9BARRM

58WMB2P

7

7450B12

55

80C3SKT

22

J9BARWM

59101

36-37

7450B24

55

80CAR

21

J9CARRM

59401

36-37

7450W12

55

80CARM

21

J9CARWM

59401B

36-37

7450W24

55

80CARR

22

J9WRAM

59401C

36-37

7451BM

55

80CARRSKT

22

LP1

59401H

36-37

7451WM

55

80CARRM

22

LP100

5940A

37

7524

58

80CARW

22

LP100M

5940R

37

7524/Opaque

58

80CARWM

22

LP101

5940W

37

7524C

58

80CARWSKT

22

LP150

595384W

62

7524G

58

80CSTIM

20

LP150M

595384C

62

7524W

58

80RB

33

LP151

5C1200B

17

7524WB

58

80RM

33

LP1B

5C21

17

7524WR

58

80RMB

33

LR12/2

5C370C

17

7530

58

80WB

33

LR24/2

5C41

17

7530/Opaque

58

80WM

33

LUMILAMP2

5C430C

17

7530C

58

80WMB

LUMILAMPLB

5C490C

17

7530G

58

8PTP

5C550C

17

7530W

58

6PR1.2

5C610C

17

75C

58

6PL1.2

5C670C

17

75CLB

65

8P6

5C730C

17

75CLG

65

8P9

5C800B

17

75CLI

65

8P12

5C81

17

75CLO

65

8P15

6434BWM

52

75CLP

65

83A

6434CWM

52

75CLR

65

83G

6505BM

64

75CLY

65

83R

6505GM

64

75G

65

84DTRM

6505IM

64

75W

65

8514BM

6505OM

64

7790BM

54

856BM

6505PM

64

7790WM

54

858BM

6505RM

64

79BWR12

61

93AM

6505WM

64

79CWR12

61

93BM

6505YM

64

79GWR12

61

93GM

65362

52

79SWR12

61

93RM

68B

65

79WWR12

61

93WM

68G

65

80AB

33

94AM

68I

65

80AM

33

94BM

68O

65

80AMB

33

94RM

68P

65

80B1BB

33

94WM

68R

65

80B1CB

33

ACDC1

33 6 6 6 6 6 6 6 70 70 70 71 57 57 57 66 66 66 66 66 66 66 66 66 74

Information Correct at time of printing

Page No.

LUMILAMPRB MaXilamp1XC

13


ECE approved

Combination Lamp - 100mm x 100mm x 22mm 100mm

5

W N EDUCT

Y E A R

100mm

PRO

• 101BAR • 101BAR2 • Stop/Tail • Indicator • Reflector

W A R R A N T Y

• 101BARLP • Stop/Tail • Indicator • Reflector • Licence

• 101BAR10 • Stop/Tail • Indicator • Reflector

22mm

100mm

125mm

• LP101

Product Description:

These lamps are fully submersible, rust proof, shock resistant and feature our square lens pattern with 8 high brightness LEDs.

Part No

101BAR

101BAR2

101BAR10

101BARLP2

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

40cm

40cm

10 metre cable

40cm

Packaging:

Box

Blister of 2

Poly Bag

Blister of 2 with licence

Current:

@13.8Volts (Stop-0.13Amps) (Tail-0.04Amps) (Ind-0.12Amps) (Licence-0.03 Amps) - @28Volts (Stop-0.12Amps) (Tail-0.06Amps) (Ind-0.07Amps)

C.R.N:

This lamp complies with ADR under ECE R1-S1-E9-02, 2a-E9-01, IA-E9-02 (Component number 6444), Licence (L 00 Component number 6110, 6134)

Fitting:

Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Combination Lamp - 150mm x 80mm x 24mm

ECE approved 150mm

5

W N EDUCT PRO

• 151BAR • 151BAR2 • Stop/Tail • Indicator • Reflector

Y E A R

80mm

• 151BAR10 • Stop/Tail • Indicator • Reflector

• 151BARLP • Stop/Tail • Indicator • Reflector • Licence

W A R R A N T Y

24mm 100mm

150mm

105mm

• LP151 28mm 100mm

Product Description:

These lamps are fully submersible, rust proof, shock resistant and feature our square lens pattern with 8 high brightness LEDs.

Part No

151BAR

151BAR2

151BAR10

151BARLP2

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

40cm

40cm

10 metre cable

40cm

Blister of 2

Poly Bag

Blister of 2 with licence

Packaging:

Box

Current:

@13.8Volts (Stop-0.13Amps) (Tail-0.04Amps) (Ind-0.12Amps) (Licence-0.03 Amps) - @28Volts (Stop-0.12Amps) (Tail-0.06Amps) (Ind-0.07Amps)

C.R.N:

This lamp complies with ADR under ECE approval 01 2a, 02 R1-S1, 02 1A (Component number 6362), Licence (L 00 Component number 6110)

Fitting:

Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

14

Information Correct at time of printing


ADR / ECE approved

Combination Lamp - 100mm x 100mm x 22mm 100mm

• 100BAR • 100BAR2 • 100ARM • Stop/Tail • Indicator • Reflector

L I F E T I M E

• 100BARB Black PCB • Stop/Tail • Indicator • Reflector

100mm

22mm

100mm

W A R R A N T Y

• 100BAR10 • 100ARM10 • Stop/Tail • Indicator • Reflector

• 100BARLP • Stop/Tail • Indicator • Reflector • Licence

125mm

• LP100 • LP100M

W N EDUCT PRO

Description:

These lamps are fully submersible, rust proof, shock resistant and feature our diamond lens pattern. The circuit board is fully encased in resin with corrosion protected tinned copper wiring. Specially designed male & female 4 pin plugs, compatible with the plug in and drive away cable system.

Part No

100BAR

100BARB

100BAR2

100BAR10

100BARLP2

100ARM

100ARM10

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

12-24 Volt

12-24 Volt

Cable:

40cm with plugs

40cm with plugs

40cm with plugs

10 metre cable

40cm with plugs

40cm with plugs

10 metre cable

Box

Blister of 2

Poly Bag

Blister of 2 & licence

Blister of 1

Poly Bag

Packaging:

Box

Current:

@13.8Volts (Stop-0.13Amps) (Tail-0.04Amps) (Ind-0.12Amps) (Licence-0.03 Amps) - @28Volts (Stop-0.12Amps) (Tail-0.06Amps) (Ind-0.07Amps)

C.R.N:

(Stop/tail 37986) (Indicator 37985) (Reflex Reflector 38102) Licence (L 00 Component number 6134)

Fitting:

Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Combination Lamp - 150mm x 80mm x 24mm • 150BAR • 150BAR2 • 150ARM • Stop/Tail • Indicator • Reflector

L I F E T I M E

• 150BARB Black PCB • Stop/Tail • Indicator • Reflector

ADR / ECE approved 150mm

80mm

24mm 100mm

150mm

W A R R A N T Y

• 150BAR10 • 150ARM10 • Stop/Tail • Indicator • Reflector

• 150BARLP • Stop/Tail • Indicator • Reflector • Licence

105mm

• 28mm LP150 • LP150M 100mm

W N EDUCT PRO

Product Description:

These lamps are fully submersible, rust proof, shock resistant and feature our diamond lens pattern. The circuit board is fully encased in resin with corrosion protected tinned copper wiring. Specially designed male & female 4 pin plugs, compatible with the plug in and drive away cable system.

Part No

150BAR

150BARB

150BAR2

150BAR10

150BARLP2

150ARM

150ARM10

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

12-24 Volt

12-24 Volt

Cable:

40cm with plugs

40cm with plugs

40cm with plugs

10 metre cable

40cm with plugs

40cm with plugs

10 metre cable

Packaging:

Box

Box

Blister of 2

Poly Bag

Blister of 2 & licence

Blister of 1

Poly Bag

Current:

@13.8Volts (Stop-0.13Amps) (Tail-0.04Amps) (Ind-0.12Amps) (Licence-0.03 Amps) - @28Volts (Stop-0.12Amps) (Tail-0.06Amps) (Ind-0.07Amps)

C.R.N:

(Stop/tail 37381) (Indicator 37380) (Reflex Reflector 38102) Licence (L 00 Component number 6110)

Fitting:

Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

15


ADR/ECE approved

Combination Lamp - 275mm x 100mm x 22mm L I F E T I M E

• 275BAR - 12 volt • 275BAR2 - 12 volt • 275ARM - 12-24 volt • Stop/Tail • Indicator • Reflector

275mm

100mm

22mm

W A R R A N T Y

115mm

• 275BARB - 12 volt Black PCB • Stop/Tail • Indicator • Reflector

Product Description:

These lamps are fully submersible, rust proof, shock resistant and feature our diamond lens pattern. The circuit board is fully encased in resin with corrosion protected tinned copper wiring. Specially designed male & female 4 pin plugs, compatible with the plug in and drive away cable system.

Part No

275BAR

275BARB

275BAR2

275ARM

Voltage:

12 Volt

12 Volt

12 Volt

12-24 Volt

Cable:

40cm with plugs

40cm with plugs

40cm with plugs

40cm with plugs

Packaging:

Box

Box

Blister of 2

Blister of 1

Current:

@13.8Volts (Stop-0.14Amps) (Tail-0.07Amps) (Ind-0.10Amps) - @28Volts (Stop-0.11Amps) (Tail-0.05Amps) (Ind-0.12Amps)

C.R.N:

(Stop/tail 38658) (Indicator 38657) (Reflex Reflector 38102)

Fitting:

Surface mount onto flat surface vertically with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Small Trailer Harnessing System • • • • •

Available for the 100, 150, 207 and 275 series lamps Wiring of a trailer can now be done without cutting, splicing, joining or insulating wires & cables LED Technologies specially designed waterproof plugs and sockets with tinned copper terminals Tinned copper wire cable – tinning of wire counteracts ‘salt water wicking’ which occurs when moisture is drawn into the wire & turns it into a greenish gunk caused by chemical reaction Optional accessory wires at the ends of male plugs if side markers are to be added to the trailer

Boat cable connector

Gooseneck to lamp cable

• Part No. BCC1

• Part No. 5C370 3.7 metre

1 Metre cable with trailer plug

• Part No. 5C430

4.3 metre

• Part No. 5C21

• Part No. 5C490

4.9 metre

• Part No. 5C81

5.5 metre

• Part No. 5C610

• Part No. 5C41 6.1 metre

Lamp to lamp cable 1.1 metre 1.3 metre 1.5 metre 1.7 metre 1.9 metre 2.1 metre 2.2 metre 3.2 metre

• Box Trailer Harness Kit

16

• Part No. 5C670

6.7 metre

• Part No. 4C110

• Part No. 5C730

7.3 metre

• Part No. 5C800

• Part No. 4C130 8.0 metre

• Part No. 4C150 • Part No. 4C170 • Part No. 4C190 • Part No. 4C210 • Part No. 4C220 • Part No. 4C320

See page 17 for cables

• Part No. 5C550

• Part No. 5C1200

12.0 metre

Boat trailer cable

• Part No. BC600 6.0 metre

• Part No. BC800

8.0 metre

• Part No. BC1000

10.0 metre

• Part No. BC1200

12.0 metre

• Boat Trailer Harness Kit

Information Correct at time of printing


Electrical Harness System suitable for 100,150, 207 and 275 series lamps 7 Pin Flat

7 Pin Round

7 Pin Small Round

1 Metre cable with trailer plug

Product Description:

(5C) Trailer connector 5 core cable are fully water proof using anti corrosive tinned copper wire and water proof grease at the plug ends. 3 sizes available with the most popular plug connectors currently used in Australia, small round, large round and rectangular.

Length:

1 metre

1 metre

1 metre

Part No:

5C41 - Hang

5C81 - Hang

5C21 - Hang

Fitting:

Plug into the end of the Lamp to Gooseneck cable, then run along draw bar of trailer and plug trailer connector into vehicle trailer connector base.

Lamp to Lamp cables

Product Description:

(4C) Lamp to lamp 4 core cable are fully water proof using anti corrosive tinned copper wire and water proof grease at the plug ends, with accessory wires for licence plate or marker lamps. Up to 8 lengths available.

Length:

1.1 metre

1.3 metre

1.5 metre

1.7 metre

1.9 metre

2.1 metre

3.2 metre

Part No:

4C110C Hang

4C130C Hang

4C150C Hang

4C170C Hang

4C190C Hang

4C210C Hang

4C320B Bulk

Fitting:

Plug into back of one lamp and then into “T” piece of the lamp to gooseneck cable.

Lamp to Gooseneck cables

Product Description:

(5C) Lamp to gooseneck 5 core cable are fully water proof using anti corrosive tinned copper wire and water proof grease at the plug ends, with accessory wires for licence plate or marker lamps. Up to 9 lengths available.

Length:

3.7 metre

4.3 metre

4.9 metre

5.5 metre

6.1 metre

6.7 metre

7.3 metre

8.0 metre

12.0 metre

Part No:

5C370C Hang

5C430C Hang

5C490C Hang

5C550C Hang

5C610C Hang

5C670C Hang

5C730C Hang

5C800B

5C1200B

Fitting:

Plug “T” piece into back of one lamp and then plug the lamp to lamp cable into “T” piece. Run cable to draw bar and plug into Trailer connector.

Boat trailer cables and Joiner

BCC1

Product Description:

(BC) Boat trailer lamp to gooseneck cable are fully water proof using anti corrosive tinned copper wire and water proof grease at the plug ends, with accessory wires for marker lamps with 2C plug ends. 4 lengths available. Y-piece connector to trailer plug cable also available.

Length:

6 metre

8 metre

10 metre

12 metre

N/A

Part No:

BC600C Hang

BC800C Hang

BC1000C Hang

BC1200C Hang

BCC1

Fitting:

Use 1 cable per side, plug into back of Left and right lamp then plug into “Y” piece connector at gooseneck. Plug end of Y piece into trailer plug cable.

Licence plate lamps

• 35BLM1P • LP1

Description:

The 1 meter of cable with plug clips into back of the 100, 150 and 275 series Generation II lamps. See page 15 or 16 for full details

Part No:

LP1

LP1B

35BLM1P

Voltage:

Dual Voltage 12-24volt

Dual Voltage 12-24volt

Dual Voltage 12-24volt

CRN#:

39611

39611

36280

Information Correct at time of printing

17


Combination Lamp - 275mm x 100mm x 33mm

ADR approved

Made in Australia

• 275GARWM • Stop/Tail W • Indicator N EDUCT • Reverse PRO • Reflector

5 Y E A R

275mm

100mm

W A R R A N T Y

• 275RARWM • Stop/Tail • Indicator W N EDUCT • Reverse O R P • Reflector

33mm 100mm

Product Description:

Our own product proudly designed and made in Australia from high quality components, we consider this light to be the best in the Australian market. Our reputation is on the line.

Part No

275GARWM - Grey Frame

275RARWM - Red Frame

Voltage:

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

Packaging:

Blister

Blister

Current:

TBA

C.R.N:

(Stop/tail 43223) (Indicator 43221) (Reverse 43222) (Reflex Reflector 38102)

Fitting:

Surface mount onto flat surface horizontally to the ground using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

ADR/ECE approved

Combination Lamp - 250mm x 80mm x 24mm 5 • 250ARWM • 250ARWMB • Stop/Tail • Indicator • Reverse • Reflector

Y E A R W A R R A N T Y

Product Description:

250mm

W N EDUCT

80mm

PRO

24mm

• 250RARM • 250RARMB • Stop/Tail • Indicator • Reflector

W N EDUCT

200mm

PRO

These lamps are fully submersible, rust proof, shock resistant and feature our diamond lens pattern. The circuit board is fully encased in resin with corrosion protected tinned copper wiring. Same lens design as our popular 150 series.

Part No

250ARWM

250ARWMB

250RARM

250RARMB

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

40cm

Packaging:

Blister

Bulk

Blister

Bulk

Current:

TBA

C.R.N:

This lamp complies with ADR with ECE approval

Fitting:

Surface mount onto flat surface horizontally to ground using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

18

(Stop/tail 43362) (Indicator 43361) (Reflex Reflector 38102)

Information Correct at time of printing


ADR approved

Combination Lamp - 400mm x 130mm x 45mm 400mm

• J3BARM • Stop/Tail • Indicator • Reflector

W 5 A R Y R E A A N R T Y

130mm

45mm

W N EDUCT PRO

Product Description:

The J3 series Jumbo lamps are water proof and shock resistant, with classic styling, modern aesthetic appeal and featuring a specially designed inner chrome reflector. Individual lenses are available separately for replacement. These lamps are ADR approved for horizontal or vertical mount.

Part No

J3BARM

Voltage:

12-24 Volt

Cable:

1.2 metre sheathed hard wired

Packaging:

Blister carry pack of 1

Current:

@13.8Volts 1.80Amps - @28Volts 0.78Amps

C.R.N:

(Stop/tail 42965) (Indicator 42964) (Reflector 42966)

Fitting:

Surface mount onto flat surface horizontally or vertically using bolts in back of lamp, run wires through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Jumbo Combination Lamp - 595mm x 130mm x 45mm ADR approved • J3BARRM • Stop/Tail • Indicator • Reflector

5 Y E A R

595mm 130mm

W N EDUCT PRO

W A R R A N T Y

45mm

• J3BARWM • Stop/Tail • Indicator • Reverse • Reflector

500mm

W N EDUCT PRO

Product Description:

The J3 series Jumbo lamps are water proof and shock resistant, with classic styling, modern aesthetic appeal and featuring a specially designed inner chrome reflector. Individual lenses are available separately for replacement. These lamps are ADR approved for horizontal or vertical mount. Soon to be released in triple red configuration.

Part No

J3BARRM

J3BRRRM

J3BARWM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

1.2 metre sheathed hard wired

1.2 metre sheathed hard wired

1.2 metre sheathed hard wired

Packaging:

Blister carry pack of 1

Blister carry pack of 1

Blister carry pack of 1

Current:

@13.8Volts 1.80Amps - @28Volts 0.78Amps

@13.8Volts TBAAmps - @28Volts TBAAmps

@13.8Volts 1.00Amps - @28Volts 0.48Amps

C.R.N:

(Stop/tail 42965) (Indicator 42964) (Reverse 42967) (Reflector 42966)

Fitting:

Surface mount onto flat surface horizontally or vertically using bolts in back of lamp, run wires through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Replacement inserts - 194mm x 123mm x 30mm W 5 A R Y R E A A N R T Y Product Description:

ADR approved

194mm 123mm

30mm

• J3RM • Stop/Tail • Reflector

W N EDUCT PRO

• J3AM • Indicator • Reflector

W N EDUCT PRO

• J3WM • Reverse • Reflector

W N EDUCT PRO

The J3 series Jumbo lamps are water proof and shock resistant, with classic styling, modern aesthetic appeal and featuring a specially designed inner chrome reflector. Individual lenses are available separately for replacement. These lamps are ADR approved for horizontal or vertical mount.

Information Correct at time of printing

19


Combination Lamp - 100mm x 100mm x 28mm

100mm

ADR/ECE approved

100mm

W 5 A R Y R E A A N R T Y

• 80BSTIM • 80BSTIMB • Stop/Tail • Indicator

100mm

• 80CSTIM • Stop/Tail • Indicator

100mm

28mm 28mm

Product Description:

The 80 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or small sized commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.

Part No

80BSTIM

80BSTIMB

80CSTIM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

Packaging:

Blister of 1

Box of 1

Blister of 1

Current:

@13.8Volts (Stop-0.33Amps) (Tail-0.06Amps) (Ind-0.31Amps) (Rev-0.29Amps) - @28Volts (Stop-0.25Amps) (Tail-0.04Amps) (Ind-0.22Amps) (Rev-0.21Amps) Each lens @13.8Volts (Stop-0.27Amps) (Tail-0.04Amps) (Ind-0.18Amps) - @28Volts (Stop-0.13Amps) (Tail-0.04Amps) (Ind-0.09Amps) Stop/Tail/Ind single lens

C.R.N:

Combination lamp (Stop 35788) (tail 35789) (Indicator 35787)

Fitting:

Surface mount bracket, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Combination Lamp - 122mm x 122mm x 31mm W 5 A R Y R E A A N R T Y

ADR/ECE approved

122mm

• 100CSTIM • Stop/Tail • Indicator

• 100BSTIM • 100BSTIMB • Stop/Tail • Indicator

122mm

122mm

122mm

31mm

31mm

Product Description:

The 100 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or small sized commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.

Part No

100BSTIM

100CSTIM

Voltage:

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

Packaging:

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.17Amps) (Tail-0.04Amps) (Ind-0.18Amps) - @28Volts (Stop-0.14Amps) (Tail-0.04Amps) (Ind-0.11Amps)

C.R.N:

(Stop 35781) (tail 35782) (Indicator 35783)

Fitting:

Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Combination Lamp - 147mm x 147mm x 31mm

31mm 147mm

147mm 147mm

Product Description:

147mm

• 125CSTIM • Stop/Tail • Indicator

• 125BSTIM • 125BSTIMB • Stop/Tail • Indicator

W 5 A R Y R E A A N R T Y

ADR/ECE approved

31mm

The 125 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or small sized commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.

Part No

125BSTIM

125BSTIMB

125CSTIM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

Packaging:

Blister of 1

Box of 1

Blister of 1

Current:

@13.8Volts (Stop-TBAAmps) (Tail-TBAAmps) (Ind-TBAAmps) - @28Volts (Stop-TBAAmps) (Tail-TBAAmps) (Ind-TBAAmps)

C.R.N:

(Stop TBA) (tail TBA) (Indicator TBA)

Fitting:

Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

20

Information Correct at time of printing


ADR/ECE approved

Combination Lamp - 188mm x 100mm x 28mm 5 Y E A R W A R R A N T Y

188mm

100mm

28mm

• 80BAR • 80BARM • Stop/Tail • Indicator

Product Description:

• 80CAR • 80CARM • Stop/Tail • Indicator

150mm

The 80 series lamps are fully submersible, rust proof and shock resistant and feature our hexagonal pattern lens. The rear of the circuit board is fully encased in resin. Individual clip in lenses for easy replacement.

Part No

80BAR

80CAR

80BARM

80CARM

Voltage:

12 Volt

12 Volt

12-24 Volt

12-24 Volt

Cable:

40cm Hardwired

40cm Hardwired

40cm Hardwired

40cm Hardwired

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.33Amps) (Tail-0.06Amps) (Ind-0.31Amps) - @28Volts (Stop-0.25Amps) (Tail-0.04Amps) (Ind-0.22Amps)

C.R.N:

(Stop/tail 33059) (Indicator 33098)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

ADR/ECE approved

Combination Lamp - 340mm x 200mm x 60mm

5 Y E A R W A R R A N T Y

60mm

200mm

340mm

• 125BARML- Left Side • Stop/Tail • Indicator • Reflector

• 125BARMR - Right Side • Stop/Tail • Indicator • Reflector

Product Description:

The 125 series lamps are fully submersible, shock resistant, feature our hexagonal lens pattern. Specifically designed for retro fit to same type commercial vehicles. This assembly has individual clip in lenses for easy replacement.

Part No

125BARML

125BARMR

Voltage:

12-24 Volt

12-24 Volt

Cable:

16cm loomed and sheathed from outer casing.

16cm loomed and sheathed from outer casing.

Packaging:

Box

Box

Current:

@13.8Volts (Stop-0.42Amps) (Tail-0.04Amps) (Ind-0.43Amps) - @28Volts (Stop-0.26Amps) (Tail-0.06Amps) (Ind-0.26Amps)

C.R.N:

(Stop/tail 33403) (Indicator 33165) (Reflex Reflector 38102)

Fitting:

Secure horizontally to the ground using top or back mounting holes in assembly and run wires through back. Refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

21


Combination Lamp - 278mm x 100mm x 28mm

ADR/ECE approved

5 Y E A R W A R R A N T Y

278mm

• 80BARR - 12 volt • 80BARRM - multivolt • Stop/Tail/Indicator

• 80CARR - 12 volt • 80CARRM - multivolt • Stop/Tail/Indicator

100mm

28mm

240mm

• 80BARW - 12 volt • 80BARWM - multivolt • Stop/Tail/Indicator/Reverse

Product Description:

• 80CARW - 12 volt • 80CARWM - multivolt • Stop/Tail/Indicator/Reverse

The 80 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. The rear of the circuit board is fully encased in resin. Individual clip in lenses for easy replacement, surface mount with no visible screws. Specifically designed for trailers or small sized commercial vehicles.

Part No

80BARR

80BARW

80BARRM

80BARWM

80CARR

80CARW

80CARRM

80CARWM

Voltage:

12 Volt

12 Volt

12-24 Volt

12-24 Volt

12 Volt

12 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.33Amps) (Tail-0.06Amps) (Ind-0.29Amps) (Rev-0.17Amps) - @28Volts (Stop-0.25Amps) (Tail-0.04Amps) (Ind-0.22Amps) (Rev-0.21Amps) Each lens

C.R.N:

(Stop/tail 33059) (Indicator 33098) (Reverse 35797)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

ADR/ECE approved

Combination Lamp - 280mm x 110mm x 29mm

Y E A R

W N EDUCT

W N EDUCT

5

PRO

PRO

110mm

• 80CARRSKT - 12 volt • Stop/Tail/Indicator including right angle bracket

• 80BARRSKT - 12 volt • Stop/Tail/Indicator including right angle bracket

W A R R A N T Y

280mm

120mm

120mm 53mm 29mm

W N EDUCT

W N EDUCT

PRO

PRO

• 80BARWSKT - 12 volt • Stop/Tail/Indicator/Reverse including right angle bracket

• 80CARWSKT - 12 volt • Stop/Tail/Indicator/Reverse including right angle bracket

Product Description:

The 80 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. The rear of the circuit board is fully encased in resin. Individual clip in lenses for easy replacement. Surface mounted onto supplied metal right angled bracket available in black or silver with no visible screws. Specifically designed for trailers or small sized commercial vehicles.

Part No

80CARRSKT

80CARWSKT

80BARRSKT

80BARWSKT

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

40cm

40cm

40cm

40cm

Packaging:

Blister of 2

Blister of 2

Blister of 2

Blister of 2

Current:

@13.8Volts (Stop-0.33Amps) (Tail-0.06Amps) (Ind-0.29Amps) (Rev-0.17Amps) - @28Volts (Stop-0.25Amps) (Tail-0.04Amps) (Ind-0.22Amps) (Rev-0.21Amps) Each lens

C.R.N:

(Stop/tail 33059) (Indicator 33098) (Reverse 35797)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

22

Information Correct at time of printing


Combination Lamp - 350mm x 120mm x 31mm

ADR/ECE approved

5 Y E A R

350mm

W A R R A N T Y

• 100BARRM • Stop/Tail • Indicator

120mm

• 100CARRM • Stop/Tail • Indicator

31mm

290mm

• 100BARWM • Stop/Tail • Indicator • Reverse

Product Description:

• 100CARWM • Stop/Tail • Indicator • Reverse

The 100 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or medium sized commercial vehicles. Individual clip in lenses allow easy replacement and surface mounted with no visible screws.

Part No

100BARRM

100CARRM

100BARWM

100CARWM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.38Amps) (Tail-0.04Amps) (Ind-0.38Amps) (Rev-0.31Amps) - @28Volts (Stop-0.24Amps) (Tail-0.07Amps) (Ind-0.23Amps) (Rev-0.17Amps) Each lens

C.R.N:

(Stop/tail 33402) (Indicator 33156) (Reverse 35793)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

ADR/ECE approved

Combination Lamp - 435mm x 145mm x 31mm 5 Y E A R W A R R A N T Y

435mm

• 125BARRM • Stop/Tail • Indicator

• 125CARRM • Stop/Tail • Indicator

147mm

31mm

370mm

• 125BARWM • Stop/Tail • Indicator • Reverse Product Description:

• 125CARWM • Stop/Tail • Indicator • Reverse

The 125 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern specifically designed for trailers or medium sized commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.

Part No

125BARRM

125CARRM

125BARWM

125CARWM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.42Amps) (Tail-0.04Amps) (Ind-0.43Amps) (Rev-0.36Amps) - @28Volts (Stop-0.26Amps) (Tail-0.06Amps) (Ind-0.25Amps) (Rev-0.18Amps) Each lens

C.R.N:

(Stop/tail 33403) (Indicator 33165) (Reverse 35794)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

23


ADR/ECE approved

Combination Lamp - 350mm x 105mm x 48mm 5

350mm

• 80BAARRM • Stop/Tail • Indicator

Y E A R W A R R A N T Y

105mm

48mm

256mm

• 80BARRWM • Stop/Tail • Indicator • Reverse

Product Description:

The 80 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or small sized commercial vehicles. This assembly is loomed up with individual clip in lenses. Brackets available separately.

Part No

80BAARRM

80BARRWM

Voltage:

12-24 Volt

12-24 Volt

Cable:

40cm Hardwired

40cm Hardwired

Packaging:

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.38Amps) (Tail-0.04Amps) (Ind-0.38Amps) (Rev-0.31Amps) - @28Volts (Stop-0.25Amps) (Tail-0.04Amps) (Ind-0.22Amps) (Rev0.21Amps) Each lens.

C.R.N:

(Stop/tail 33059) (Indicator 33098) (Reverse 35797)

Fitting:

Surface mount assembly onto flat surface horizontally to the ground with bolts provided, run wires through back. Please refer to ADR 13/00 for mounting instructions.

ADR/ECE approved

Combination Lamp - 430mm x 125mm x 50mm

• 100BAARRM • Stop/Tail • Indicator

5 Y E A R W A R R A N T Y

430mm

125mm

50mm

• 100BARRWM • Stop/Tail • Indicator • Reverse

152.6mm

Product Description:

The 100 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or medium sized commercial vehicles. This assembly is set up with individual clip in lenses. Brackets available separately.

Part No

100BAARRM

100BARRWM

Voltage:

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

Packaging:

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.38Amps) (Tail-0.04Amps) (Ind-0.38Amps) (Rev-0.29Amps) - @28Volts (Stop-0.24Amps) (Tail-0.07Amps) (Ind-1.23Amps) (Rev-0.17Amps). Each lens.

C.R.N:

(Stop/tail 33402) (Indicator 33156) (Reverse 35793)

Fitting:

Surface mount assembly onto flat surface horizontally to the ground with bolts provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

24

Information Correct at time of printing


W 5 A R Y R E A A N R T Y

ADR/ECE approved

Combination Lamp - 200mm x 50mm x 28mm • 200BSTIM • 200BSTIMB • Stop/Tail • Indicator

• 200BSTIR48 • 200BSTIRM • Stop/Tail • Indicator • Reverse • Non ADR/ECE Approved

• 200CSTIM • Stop/Tail • Indicator

200mm 50mm

28mm

Product Description:

The 200 series are fully submersible, rust proof, shock resistant and feature our hexagonal pattern lens. The rear of the circuit board is fully encased in resin. Their size is designed to fit into small spaces with individual clip in lenses for easy replacement and surface mounted with no visible screws.

Part No

200BSTIM

200BSTIMB

200CSTIM

200BSTIRMB

200BSTIR48

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

48 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

Packaging:

Blister of 1

Box of 1

Blister of 1

Box of 1

Box of 1

Current:

BSTIM - @13.8Volts (Stop-0.29Amps) (Tail-0.09Amps) (Ind-0.19Amps) - @28Volts (Stop-0.16Amps) (Tail-0.07Amps) (Ind-0.07Amps) BSTIRM - @13.8Volts (Stop0.10Amps) (Tail-0.02Amps) (Ind-0.11Amps) (Rev-0.10Amps) - @28Volts (Stop-0.08Amps) (Tail-0.04Amps) (Ind-0.08Amps) (Rev-0.08Amps) @48Volts (Stop-0.41Amps) (Tail-0.11Amps) (Ind-0.40Amps) (Rev-0.28Amps)

C.R.N:

(Stop/tail 35786, 35785) (Indicator 35784)

Fitting:

Surface mount bracket with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

NO

NO

Combination Lamp - 200mm x 92mm x 28mm • 200BARM • Stop/Tail • Indicator

W 5 A R Y R E A A N R T Y

• 200BRWM • Stop/Tail • Indicator • Reverse

ADR/ECE approved 200mm

92mm

• 200CARM • Stop/Tail • Indicator

Product Description:

• 200CRWM • Stop/Tail • Indicator • Reverse

28mm

The 200 series are fully submersible, rust proof and shock resistant and feature our hexagonal pattern lens. The rear of the circuit board is fully encased in resin. Their size is designed to fit into small spaces with individual clip in lenses for easy replacement and surface mounted with no visible screws.

Part No

200BARM

200CARM

200BRWM

200CRWM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.34Amps) (Rev-0.17Amps) - @28Volts (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps) (Rev-0.18Amps) Each lens

C.R.N:

(Stop/tail 35941) (Indicator 35795) (Reverse 35796)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with bolts provided, run wires through back and clip lens into place. Please refer to ADR 13/00.

ADR/ECE approved

Combination Lamp - 200mm x 92mm x 28mm Trailer Harness Available page 17 • 207BARP • Stop/Tail • Indicator

W 5 A R Y R E A A N R T Y

200mm

• 200BARP • Stop/Tail • Indicator

92mm

28mm

• 200BARL • Stop/Tail • Indicator • Licence

• 207BARL • Stop/Tail • Indicator • Licence

200mm

113mm

28mm

Product Description:

The 200/207 series boat trailer lamps are fully submersible, shock resistant and utilize our plug in and drive away cable system or can be wired to existing looms with 40cm of tinned copper wire in a dual protective cable. Replaceable lenses, surface mount with no visible screws.

Part No

207BARP

207BARL

207BARLP2

200BARLPM2

Voltage:

12 Volt

12 Volt

12 Volt

12-24 Volt

Cable:

40cm with plugs

40cm with plugs

40cm with plugs

40cm with plugs

Poly Bag of 1

Blister of 2 LHS/RHS

Blister of 2 LHS/RHS

Packaging:

Poly Bag of 1

Current:

@13.8Volts (Stop-0.18Amps) (Tail-0.07Amps) (Ind-0.17Amps) (Lic-0.02Amps) - @28Volts (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.39Amps) (Lic-0.02Amps)

C.R.N:

12 Volt - (Stop/tail 37371) (Indicator 37350) (Licence37845)

Fitting:

Surface mount onto flat surface horizontally to the ground with stainless steel bolts provided in assembly and run cable through 12mm hole. Please refer to ADR 13/00.

12-24 Volt - (Stop/tail 35941) (Indicator 35795) (Licence 37844)

Information Correct at time of printing

25


ADR/ECE approved

Combination Lamp - 200mm x 134mm x 28mm W 5 A R Y R E A A N R T Y

200mm

134mm

• 200BARRM • Stop/Tail • Indicator

Product Description:

• 200BARWM • Stop/Tail • Indicator • Reverse

• 200CARRM • Stop/Tail • Indicator

• 200CARWM • Stop/Tail • Indicator • Reverse

28mm

The 200 series are fully submersible, rust proof and shock resistant and feature a hexagonal pattern lens. The rear of the circuit board is fully encased in resin. Their size is designed to fit into small spaces with individual clip in lenses for easy replacement and surface mounted with no visible screws.

Part No

200BARRM

200CARRM

200BARWM

200CARWM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8V (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.34Amps) (Rev-0.17Amps) - @28V (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps) (Rev-0.18Amps) Each lens

C.R.N:

(Stop/tail 35941) (Indicator 35795) (Reverse 35796)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with bolts provided, run wires through back and clip lens into place. Please refer to ADR 13/00.

5

400mm

Y E A R W A R R A N T Y

ADR/ECE approved

Combination Lamp - 400mm x 92mm x 40mm

92mm

40mm

• 207BAR4 • Stop/Tail • Indicator

280mm

• 207BARL4 • Stop/Tail • Indicator • Licence

400mm

113mm

• 200BARM4 • Stop/Tail • Indicator

Product Description:

40mm

• 200BARLM4 • Stop/Tail • Indicator • Licence

280mm

A unique idea giving more choice and versatility for truck and trailer applications. 4 bank combination housing either 200 or 207 series lamps also available with a licence plate lamp, individual clip in lenses. Backing plate also available separately.

Part No

207BAR4

207BARL4

200BARM4

200BARLM4

Voltage:

12 Volt

12 Volt

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

Packaging:

Box of 1

Box of 1

Blister of 1

Blister of 1

Current:

@13.8V (Stop-0.36Amps) (Tail-0.14Amps) (Ind-0.34Amps) (Lic-0.02Amps) - @28V (Stop-0.64Amps) (Tail-0.08Amps) (Ind-0.78Amps) (Lic-0.02Amps)

C.R.N:

12 Volt - (Stop/tail 37371) (Indicator 37350) (Licence37845)

Fitting:

Surface mount onto flat surface horizontally to the ground with stainless steel bolts provided in assembly, run cable through 12mm hole. Please refer to ADR 13/00.

12-24 Volt - (Stop/tail 35941) (Indicator 35795) (Licence 37844)

ADR/ECE approved

Combination Lamp - 400mm x 135mm x 40mm W 5 A R Y R E A A N R T Y

400mm 400mm 135mm 135mm

40mm 40mm

• 207BAR6 • Stop/Tail • Indicator

• 200BARM6 • Stop/Tail • Indicator

280mm 280mm

Product Description:

A unique idea giving more choice and versatility for truck and trailer applications. 6 bank combination housing either 200 or 207 series lamps, individual clip in lenses. Backing plate also available separately.

Part No

207BAR6

200BARM6

Voltage:

12 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

Packaging:

Box of 1

Box of 1

Current:

@13.8Volts (Stop-0.54Amps) (Tail-0.21Amps) (Ind-0.51Amps) - @28Volts (Stop-0.96Amps) (Tail-0.12Amps) (Ind-1.17Amps).

C.R.N:

12 Volt - (Stop/tail 37371) (Indicator 37350)

Fitting:

Surface mount onto flat surface horizontally to the ground with stainless steel bolts provided in assembly and run cable. Please refer to ADR 13/00.

26

12-24 Volt - (Stop/tail 35941) (Indicator 35795)

Information Correct at time of printing


ADR/ECE approved

Combination Lamp - 594mm x 130mm x 28mm 130mm

28mm

• J9BARRM • Stop/Tail • Indicator

5 Y E A R

594mm

W A R R A N T Y

• J9BARWM • Stop/Tail • Indicator • Reverse

130mm

28mm

594mm

Product Description:

The 200 series Jumbo lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. They are the same dimensions as the common three lamp jumbo. Individual clip in lenses for easy replacement, or use the J9 bracket to make your own combination.

Part No

J9BARRM

J9BARWM

Voltage:

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired, loomed.

40cm Hard wired, loomed.

Packaging:

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.34Amps) (Rev-0.17Amps) - @28Volts (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps) (Rev-0.18Amps) Each lens

C.R.N:

(Stop/tail 35941) (Indicator 35795) (Reverse 35796)

Fitting:

Surface mount onto flat surface horizontally to the ground with bolts provided in assembly, run loomed cable through 12mm hole. Please refer to ADR 13/00 for mounting instructions.

ADR/ECE approved

Combination Lamp - 594mm x 130mm x 28mm 130mm

• J9CARRM • Stop/Tail • Indicator

5 Y E A R W A R R A N T Y

594mm

130mm

• J9CARWM • Stop/Tail • Indicator • Reverse

28mm

28mm

594mm

Product Description:

The 200 series Jumbo lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. They are the same dimensions as the common three lamp jumbo. Individual clip in lenses for easy replacement, or use the J9 bracket to make your own combination.

Part No

J9CARRM

J9CARWM

Voltage:

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired, loomed.

40cm Hard wired, loomed.

Packaging:

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.34Amps) (Rev-0.17Amps) - @28Volts (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps) (Rev-0.18Amps) Each lens

C.R.N:

(Stop/tail 35941) (Indicator 35795) (Reverse 35796)

Fitting:

Surface mount onto flat surface horizontally to the ground with bolts provided in assembly, run loomed cable through 12mm hole. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

27


38mm

38mm x 24mm38mm

Flush mounted type • 135ARM • Stop/Tail • Indicator

24mm

145mm 80mm

135mm

24mm

80mm

38mm

48mm

Recessed grommet type • 135ARMG • Stop/Tail • Indicator

38mm

21mm

145mm

24mm

80mm 80mm

145mm

24mm

145mm 80mm

Cut out size

48mm

36mm

W 5 A R Y R E A A N R T Y

38mm

ADR/ECE approved

24mm

24mm

Combination Lamp -

135mm 135mm x 80mm

38mm

135mm 135mm

48mm

Part No

133mm 21mm 145mm 21mmtight spaces. Individual push The 135 series lamps are fully submersible, shock resistant, feature our diamond lens pattern and are excellent for small 36mm 133mm in bracket or grommet mounted lenses for surface or recess mount with no visible screws. ADR compliant for horizontal use. 48mm 21mm 133mm 36mm 135ARM 135ARMG

Voltage:

12-24 Volt

Cable:

40cm Hard wired.

40cm Hard wired. 36mm

Packaging:

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.12Amps) (Tail-0.01Amps) (Ind-0.21Amps) - @28Volts (Stop-0.08Amps) (Tail-0.02Amps) (Ind-0.11Amps) 36mm

C.R.N:

(Stop/tail 39847) (Indicator 39846)

Fitting:

Surface mount horizontally to the ground with screws or plugs provided, run wires through back & clip lens into place. Please refer to ADR 13/00 for mounting instructions.

133mm

Product Description:

48mm

21mm

133mm 12-24 Volt

36mm 21mm 133mm

ADR/ECE W N EDUCT Combination Strip Lamps - 258mm x 82mm x 17mm approved PRO

W 5 A R Y R E A A N R T Y

258mm 82mm

• 235BAR12 • Stop/Tail • Indicator

• 235WAR12 • Stop/Tail • Indicator

• 235CAR12 • Stop/Tail • Indicator

258mm

17mm

82mm

Product Description:

The 235 series lamps have been released and blister packed with a twin chrome bracket that allows them to be surface mounted without the need for a cut out. The brackets are also available separately in chrome, white and black.

Part No

235BAR12

235CAR12

17mm

235WAR12

Voltage:

12 Volt only

12 Volt only

12 Volt only

Cable:

40cm

40cm

40cm

Blister of 1

Blister of 1

Packaging:

Blister of 1

Current:

@13.8Volts (Stop-0.14 Amps) (Tail-0.04 Amps) (Ind-0.16 Amps)

C.R.N

(Stop/tail 37678) (Indicator 39092)

Fitting:

Surface mount bracket and lights horizontally to ground with screws provided, please refer to ADR 13/00 for mounting instructions.

ADR/ECE

approved W N EDUCT Combination Strip Lamps - 428mm x 97mm x 22mm O PR

W 5 A R Y R E A A N R T Y

428mm

• 380BAR12 • Stop/Tail • Indicator

• 380CAR12 • Stop/Tail • Indicator

97mm

428mm

22mm

97mm

Product Description:

The 380 series lamps have been released and blister packed with a twin chrome bracket that allows them to be surface mounted without the need for 22mm a cut out. The brackets are also available separately in chrome, white and black.

Part No

380BAR12

380CAR12

Voltage:

12 Volt only

12 Volt only

Cable:

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-0.16 Amps) (Tail-0.04 Amps) (Ind-0.18 Amps)

C.R.N

(Stop/tail 39473) (Indicator 39470)

Fitting:

Surface mount bracket and lights horizontally to ground with screws provided, please refer to ADR 13/00 for mounting instructions.

28

Information Correct at time of printing


Combination Lamp - 140mm round x 66mm depth 140mm

• 140STIM • Stop/Tail • Indicator

ECE approved

• 140STILM • Stop/Tail • Indicator • Licence

66mm

Product Description:

Made for the European market, one model includes a licence plate lamp. These lamps are fully submersible, shock resistant and comes with a 5 year warranty.

Part No

140STIM

140STILM

Voltage:

12-24 Volt

12-24 Volt

5

Combination Lamp - 470mm x 70mm x 40mm

Y E A R

ADR/ECE approved 470mm

• 135CARRM • Stop/Tail • Indicator

W A R R A N T Y

70mm

• 135CARWMR • Stop/Tail • Indicator • Reverse

40mm

• 135CARWML • Stop/Tail • Indicator • Reverse

Product Description:

The 135 series lamps are fully submersible, shock resistant and feature our diamond lens pattern, excellent for small tight spaces. Mounted into chrome plated triple “L” bracket, two combinations available.

Part No

135CARRM

135CARWMR

135CARWML

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

Packaging:

Box of 1

Box of 1 Right hand side

Box of 1 Left hand side

Current:

@13.8Volts (Stop-0.11Amps) (Tail-0.02Amps) (Ind-0.16Amps) (Rev-0.23Amps) - @28Volts (Stop-0.08Amps) (Tail-0.02Amps) (Ind-0.06Amps) (Rev0.19Amps).

C.R.N:

(Stop/tail 39848) (Indicator 39845) (Reverse 39849)

Fitting:

Fix L bracket horizontally to the ground with lamps using three fixing points at top of bracket, hard wired. Refer to ADR 13/00 for mounting instructions.

ADR/ECE approved

Combination Lamp - 390mm x 150mm x 44mm • LUMILAMPLB • LUMILAMPRB • Stop/Tail • Indicator • Reverse • Reflector

W 5 A R Y R E A A N R T Y

390mm 150mm

44mm 150mm

Product Description:

The New LUMILAMPS are fully submersible, shock resistant and features a new stylish design. All five functions are standard with this lamp. Left and Right side available.

Part No

LUMILAMP2 (Twin pack)

LUMILAMPLB - Left

LUMILAMPRB - Right

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

Packaging:

Blister hang/stand & carry pack left/right sides

Box of 1 Left hand side

Box of 1 Right hand side

Current:

@13.8Volts (Stop-0.55Amps) (Tail-0.51Amps) (Ind-0.58Amps) (Rev-0.48Amps) - @28Volts (Stop-0.27Amps) (Tail-0.26Amps) (Ind-0.27Amps) (Rev0.32Amps).

C.R.N:

(Stop/tail 42101) (Indicator 42103) (Reverse 41986) (Reflector 42102)

Fitting:

Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

29


Combination Lamp - 125mm Diameter W 7 A R Y R E A A N R T Y

ADR/ECE approved 40mm

• MaXilamp1XRE • Stop/Tail • Indicator • Reflector

45mm

125mm

Product Description:

These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals in cleaning fluids and enhanced UV protection against fading .

Part No

MaXilamp1XRE

Voltage:

12-24 Volt

Cable:

40cm Sheathed tinned copper wire.

Packaging:

Blister pack of 1

Current:

@13.8Volts (Stop-0.34Amps) (Tail-0.07Amps) (Ind-0.37Amps) @28Volts (Stop-0.17Amps) (Tail-0.06Amps) (Ind-0.16Amps)

C.R.N:

Complies with A.D.R under E.C.E approval. E9 02 R1-S1 01 2a Component number 6064

Fitting:

Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

ADR approved

Combination Lamp - 370mm x 135mm x 40mm W 7 A R Y R E A A N R T Y

370mm

• MaXilamp3XR • MaXilamp3XRB • MaXilamp3XRR • Stop/Tail • Indicator • Reverse • Reflex Reflector

135mm

40mm 269mm

Product Description:

These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals in cleaning fluids and enhanced UV protection against fading.

Part No

MaXilamp3XRR

MaXilamp3XR

MaXilamp3XRB

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

Packaging:

Blister of 1

Blister of 1

Box of 1

Current:

3XR - @13.8V (Stop-0.54Amps) (Tail-0.08Amps) (Ind-0.77Amps) (Rev-0.67Amps) - @28V (Stop-0.27Amps) (Tail-0.04Amps) (Ind-0.35Amps) (Rev-0.34Amps).

C.R.N:

(Stop/tail 40963) (Ind 40962) (Rev 40961) (Ref 38102)

Fitting:

Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

ADR approved

Combination Lamp - 600mm x 135mm x 40mm W 7 A R Y R E A A N R T Y

• MaXilamp5XR • MaXilamp5XRR • MaXilamp5XRB • Stop/Tail • Indicator • Reverse • Reflex Reflector

600mm 135mm

40mm 500mm

Product Description:

These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals in cleaning fluids and enhanced UV protection against fading.

Part No

MaXilamp5XRR

MaXilamp5XR

MaXilamp5XRB

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

Blister of 1

Box of 1

Packaging:

Blister of 1

Draw:

@13.8V - 5XR-5XRR (Stop-1.12Amps) (Tail-0.09Amps) (Ind-0.62Amps) (Rev-0.08Amps) @ 28V - 5XR-5XRR (Stop-0.73Amps) (Tail-0.04Amps) (Ind-0.31Amps) (Rev-0.36Amps)

C.R.N:

(Stop/tail 40966) (Indicator 40964) (Reverse 40965) (Reflector 38102)

Fitting:

Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

30

Information Correct at time of printing


Combination Lamp - 125mm Diameter W 7 A R Y R E A A N R T Y

ADR/ECE approved 40mm

• MaXilamp1XC • Stop/Tail • Indicator • Reflector

45mm

125mm

Product Description:

These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals in cleaning fluids and enhanced UV protection against fading .

Part No

MaXilamp1XC

Voltage:

12-24 Volt

Cable:

40cm Sheathed tinned copper wire.

Packaging:

Blister pack of 1

Current:

@13.8Volts (Stop-0.34Amps) (Tail-0.07Amps) (Ind-0.37Amps) @28Volts (Stop-0.17Amps) (Tail-0.06Amps) (Ind-0.16Amps)

C.R.N:

Complies with A.D.R under E.C.E approval. E9 02 R1-S1 01 2a Component number TBA

Fitting:

Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Combination Lamp - 370mm x 135mm x 40mm W 7 A R Y R E A A N R T Y

370mm 370mm

• MaXilamp3XC • MaXilamp3XCW • Stop/Tail • Indicator • Reverse • Reflex Reflector

ADR approved 135mm 135mm

40mm

269mm

40mm

Product Description:

These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully 269mmin cleaning fluids encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals and enhanced UV protection against fading.

Part No

MaXilamp3XC

MaXilamp3XCW

Voltage:

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

Packaging:

Blister of 1

Blister of 1

Current:

@13.8V (Stop-0.54Amps) (Tail-0.08Amps) (Ind-0.77Amps) (Rev-0.67Amps) - @28V (Stop-0.27Amps) (Tail-0.04Amps) (Ind-0.35Amps) (Rev-0.34Amps).

C.R.N:

(Stop/tail 42689) (Ind 42683) (Rev 42684) (Ref 42507)

Fitting:

Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

ADR approved

Combination Lamp - 600mm x 135mm x 40mm W 7 A R Y R E A A N R T Y

• MaXilamp5XC • MaXilamp5XCW • Stop/Tail • Indicator • Reverse • Reflex Reflector

600mm 135mm

40mm 500mm

Product Description:

These lamps are fully submersible, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination. The circuit board is fully encased in resin and cannot be penetrated by air or water, the high impact acrylic outer cover has a high resistance to the chemicals in cleaning fluids and enhanced UV protection against fading.

Part No

MaXilamp5XC

MaXilamp5XCW

Voltage:

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

Packaging:

Blister of 1

Blister of 1

Draw:

@13.8V - (Stop-1.12Amps) (Tail-0.09Amps) (Ind-0.62Amps) (Rev-0.08Amps) @ 28V - (Stop-0.73Amps) (Tail-0.04Amps) (Ind-0.31Amps) (Rev-0.36Amps)

C.R.N:

(Stop/tail 42689) (Indicator 42683) (Reverse 42684) (Reflector 42507)

Fitting:

Surface mount to flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

31


25mm

ECE approved

Recessed Strip Lamps - 130mm x 25mm x 12.5mm

12.5mm

W 5 A R Y R E A A N R T Y

• 25A12 • Indicator

• 25R12 • Stop/Tail

130mm

• 25W12 • Supplementary Reverse (No ECE approval)

25mm

Cut out size

130mm 12.5mm

25mm

19mm 106mm

Product Description:

The 25 series lamps are fully submersible, shock resistant and are ADR 12.5mm compliant with ECE approval (except reverse lamp).

Part No

25R12

25A12

25W12

Voltage:

12 Volt

12 Volt

12 Volt 19mm

Cable:

40cm Hard wired

40cm Hard wired

Current:

@13.8Volts (Stop-0.28Amps) (Tail-0.03Amps) (Ind-0.20Amps) (Rev-0.16Amps)

C.R.N:

These lamps comply with ADR under ECE approval (Stop/Tail E9 02 R1 S1 - 6281) (Indicator E9 01 2a - 6021) 19mm

Fitting:

Mount onto flat surface horizontally to the ground and run wires through back. Push lamp into cutout (106mm x 19mm) in mounting surface, fix with 106mm screws supplied at both ends. Please refer to ADR13/00 for mounting instructions.

106mm

40cm Hard wired

ADR/ECE approved

Recessed Strip Lamps - 237mm x 25mm x 18mm 237mm

5W A Y R E R A A R N T Y

25mm 216mm 237mm

• 235R • 235R24 • Stop/Tail

• 235A • 235A24 • Indicator 25mm

• 235W • 235W24 • Supplementary Reverse 18mm (No ADR approval)

216mm 237mm

Cut out size 25mm

18mm 216mm

19mm 203mm

Description:

The 235 series lamps are fully submersible, shock resistant and are ADR compliant. They are a recessed mount with rubber grommet supplied. 19mm 18mm

Part No

235R

235A

235W 203mm

235A24

235R24

235W24

Voltage:

12 Volt

12 Volt

12 Volt

24 Volt

24 Volt

24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

Current:

@13.8Volts (Stop-0.14Amps) (Tail-0.04Amps) (Ind-0.16Amps) (Rev-0.12Amps) - @28Volts (Stop-0.13Amps) (Tail-0.05Amps) (Ind-0.12Amps) (Rev-0.06Amps).

C.R.N:

(Stop/tail 37678) (Indicator 39092)

Fitting:

Mount onto flat surface horizontally to the ground and run wires through back. Push lamp and grommet into cutout (cut out 203mm x 19mm) in mounting surface and fix with screws supplied at both ends. Please refer to ADR13/00 for mounting instructions.

203mm

19mm

40cm Hard wired

Recessed Strip Lamps - 382mm x 25mm x 18mm

ADR/ECE approved

382mm

W 5 A R Y R E A A N R T Y

• 380R • 380R24• Stop/Tail

25mm 361mm

• 380A • 380A24• Indicator • 380W • 380W24 • Supplementary Reverse (No ADR approval)

18mm

Cut out size 19mm 348mm

Description:

The 380 series lamps are fully submersible, shock resistant and are ADR compliant. They are a recess mounted with rubber grommet supplied.

Part No

380R

380A

380W

380R24

380A24

380W24

Voltage:

12 Volt

12 Volt

12 Volt

24 Volt

24 Volt

24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

Current:

@13.8Volts (Stop-0.16Amps) (Tail-0.04Amps) (Ind-0.18Amps) (Rev-0.14Amps) - @28Volts (Stop-0.12Amps) (Tail-0.01Amps) (Ind-0.10Amps) (Rev-0.09Amps).

C.R.N:

(Stop/tail 39473) (Indicator 39470)

Fitting:

Mount onto flat surface horizontally to the ground and run wires through back. Push lamp and grommet into cutout (cut out 348mm x 19mm) in mounting surface and fix with screws supplied at both ends. Please refer to ADR13/00 for mounting instructions.

32

Information Correct at time of printing


ADR/ECE approved

Square Single Lamp - 100mm x 100mm x 28mm W 5 A R Y R E A A N R T Y

• 80RM • 80RMB • 80RB • Stop/Tail

• 80AM • 80AMB • 80AB • Indicator

28mm

100mm

• 80WM • 80WMB • 80WB • Reverse

100mm

Product Description:

The 80 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or small sized commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.

Part No

80RM

80RMB

80RB

80AM

80AMB

80AB

80WM

80WMB

80WB

Voltage:

12-24 Volt

12-24 Volt

12 Volt

12-24 Volt

12-24 Volt

12 Volt

12-24 Volt

12-24 Volt

12 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Box of 1

Box of 1

Blister of 1

Box of 1

Box of 1

Blister of 1

Box of 1

Box of 1

Current:

@13.8Volts (Stop-0.33Amps) (Tail-0.06Amps) (Ind-0.31Amps) (Rev-0.29Amps) - @28Volts (Stop-0.25Amps) (Tail-0.04Amps) (Ind-0.22Amps) (Rev-0.21Amps) Each lens

C.R.N:

(Stop/tail 33059) (Indicator 33098) (Reverse 35797)

Fitting:

Surface mount bracket, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Square Single Lamp - 122mm x 122mm x 31mm W 5 A R Y R E A A N R T Y

• 100RM • 100RMB • Stop/Tail

• 100AM • 100AMB • Indicator

• 100WM • 100WMB • Reverse

ADR/ECE approved 31mm

122mm

122mm

Product Description:

The 100 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or medium sized commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.

Part No

100RM

100RMB

100AM

100AMB

100WM

100WMB

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Box of 1

Blister of 1

Box of 1

Blister of 1

Box of 1

Current:

@13.8Volts (Stop-0.38Amps) (Tail-0.04Amps) (Ind-0.38Amps) (Rev-0.31Amps) - @28Volts (Stop-0.24Amps) (Tail-0.07Amps) (Ind-0.23Amps) (Rev-0.17Amps) Each lens

C.R.N:

Single function lens (Stop/tail 33402) (Indicator 33156) (Reverse 35793)

Fitting:

Surface mount bracket, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Square Single Lamp - 147mm x 147mm x 31mm • 125RM • 125RMB • Stop/Tail

W 5 A R Y R E A A N R T Y

• 125AM • 125AMB • Indicator

ADR/ECE approved

• 125WM • 125WMB • Reverse 147mm

31mm

147mm

Product Description:

The 125 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Specifically designed for trailers or large sized commercial vehicles. Individual clip in lenses allow easy surface mount with no visible screws.

Part No

125RM

125RMB

125AM

125AMB

125WM

125WMB

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

40cm Hard wired

Packaging:

Blister of 1

Poly Bag of 1

Blister of 1

Poly Bag of 1

Blister of 1

Poly Bag of 1

Current:

@13.8Volts (Stop-0.42Amps) (Tail-0.04Amps) (Ind-0.43Amps) (Rev-0.36Amps) - @28Volts (Stop-0.26Amps) (Tail-0.06Amps) (Ind-0.25Amps) (Rev0.18Amps).

C.R.N:

(Stop/tail 33403) (Indicator 33165) (Reverse 35794)

Fitting:

Surface mount bracket, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

33


ADR/ECE approved

Single Rectangular Lamp - 200mm x 50mm x 28mm W 5 A R Y R E A A N R T Y Product Description:

• 200BRM • 200BRMB • Stop/Tail

• 200CRM • Stop/Tail

• 200BAM • 200BAMB • Indicator

• 200CAM • Indicator

• 200BWM • 200BWMB • Reverse

• 200CWM • Reverse

• 207R12 • Stop/Tail • 207A12 • Indicator

200mm 50mm

200mm 50mm

28mm

28mm

Fully submersible with the rear of the circuit board encased in resin, rust proof & shock resistant. Featuring our hexagonal lens pattern, and designed to fit into small spaces with individual clip in lenses for easy replacement. Surface mounted with no visible screws and 40cm of hard wired cable.

Part No

200BRM

200BRMB

200CRM

200BAM

200BAMB

200CAM

200BWM

200BWMB

200CWM

207R12

207A12

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12 Volt

12 Volt

Packaging:

Blister of 1

Box of 1

Blister of 1

Blister of 1

Box of 1

Blister of 1

Blister of 1

Box of 1

Blister of 1

Bag of 1

Bag of 1

Current:

200 series - @13.8Volts (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.39Amps) (Rev-0.34Amps) - @28Volts (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps) (Rev-0.18Amps) 207 series - @13.8Volts (Stop-0.18Amps) (Tail-0.07Amps) (Ind-0.17Amps)

C.R.N:

(Stop/tail 35941) (Indicator 35795) (Reverse 35796)

Fitting:

Surface mount bracket horizontally, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Double Rectangular Lamp - 200mm x 92mm x 28mm ADR/ECE approved • 200BRRM • Stop/Tail

W 5 A R Y R E A A N R T Y

• 200CRRM • Stop/Tail

200mm

92mm

• 200BAAM • Indicator

Product Description:

• 200CAAM • Indicator

28mm

Fully submersible with the rear of the circuit board encased in resin, rust proof & shock resistant. Featuring our hexagonal lens pattern, and designed to fit into small spaces with individual clip in lenses for easy replacement. Surface mounted with no visible screws and 40cm of hard wired cable.

Part No

200BRRM

200CRRM

200BAAM

200CAAM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Blister of 1

Blister of 1

Blister of 1

Packaging:

Blister of 1

Current:

@13.8V (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.34Amps) (Rev-0.17Amps) - @28V (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps) (Rev-0.18Amps) Each lens

C.R.N:

(Stop/tail 35941) (Indicator 35795)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with bolts provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Triple Rectangular Lamp - 200mm x 134mm x 28mm • Stop/Tail • 200BRRRM

• Stop/Tail • 200CRRRM

ADR/ECE approved

200mm

W 5 A R Y R E A A N R T Y

134mm

• Indicator • 200BAAAM

• Indicator • 200CAAAM 28mm

Product Description:

Fully submersible with the rear of the circuit board encased in resin, rust proof & shock resistant. Featuring our hexagonal lens pattern, and designed to fit into small spaces with individual clip in lenses for easy replacement. Surface mounted with no visible screws and 40cm of hard wired cable.

Part No

200BRRRM

200CRRRM

200BAAAM

200CAAAM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8V (Stop-0.32Amps) (Tail-0.04Amps) (Ind-0.34Amps) (Rev-0.17Amps) - @28V (Stop-0.18Amps) (Tail-0.04Amps) (Ind-0.19Amps) (Rev-0.18Amps) Each lens

C.R.N:

(Stop/tail 35941) (Indicator 35795)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with bolts provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

34

Information Correct at time of printing


Rectangular Lamps - 135mm x 38mm x 24mm W 5 A R Y R E A A N R T Y

ADR/ECE approved

135mm

• 135RM • Stop/Tail

• 135AM • Indicator 38mm

• 135WM • Reverse 135mm

24mm

38mm 135mm

80mm

24mm

38mm

80mm 145mm The 135 series lamps are fully submersible, shock resistant and feature our diamond lens pattern excellent for small tight spaces. Individual push in 24mm bracket mounted lenses for surface mount with no visible screws. 48mm 80mm 135RM 135AM 135WM 145mm 12-24 Volt 12-24 Volt 12-24 Volt 48mm 21mm 40cm Hard wired 40cm Hard wired 40cm Hard wired 145mm @13.8Volts (Stop-0.11Amps) (Tail-0.02Amps) (Ind-0.16Amps) (Rev-0.23Amps)133mm - @28Volts (Stop-0.08Amps) (Tail-0.02Amps) (Ind-0.06Amps) (Rev-0.19Amps) 48mm 21mm (Stop/tail 39848) (Indicator 39845) (Reverse 39849) 36mm Surface mount horizontally to the ground with screws or plugs provided, run wires through back & clip lens into place. Refer to 133mm ADR 13/00 135mm for mounting instructions. 21mm 135mm 36mm 38mm 133mm 135mm

Product Description: Part No Voltage: Cable: Current: C.R.N: Fitting:

38mm

24mm 36mm

ADR/ECE approved 24mm

38mm x 21mm Recessed Lamps - 145mm x 48mm 80mm

W 5 A R Y R E A A N R T Y

• 135RMG • Stop/Tail

80mm

24mm • 135AMG • Indicator

• 135WMG 80mm • Reverse

145mm 48mm

145mm

Cut out size

21mm

133mm

133mm

36mm

48mm

Part No Voltage:

12-24 Volt

12-24 Volt

Cable:

40cm Hard wired

40cm Hard wired

36mm

21mm

21mm The 135 series lamps are fully submersible, shock resistant and feature our diamond lens pattern excellent for small tight spaces. Individual push in 36mm grommet mounted lenses for recessed fit with no visible screws. 133mm 135RMG 135AMG 135WMG

Product Description:

12-24 Volt 40cm Hard wired

Current:

@13.8Volts (Stop-0.11Amps) (Tail-0.02Amps) (Ind-0.16Amps) (Rev-0.23Amps) - @28Volts (Stop-0.08Amps) (Tail-0.02Amps) (Ind-0.06Amps) (Rev-0.19Amps)

C.R.N:

(Stop/tail 39848) (Indicator 39845) (Reverse 39849)

Fitting:

Recess mount horizontally to the ground with grommet provided, run wires through back & push lens into place, (cut out for grommet 133mm x 36mm) . Refer to ADR 13/00 for mounting instructions.

W N EDUCT

ADR/ECE approved

Slimline Strip Lamps - 404mm x 46mm x 17mm

PRO

• 380CR12 • Stop/Tail

W 5 A R Y R E A A N R T Y Product Description:

404mm 46mm 361mm

• 380CA12• Indicator

• 380CW12 • Supplementary Reverse No ADR/ECE Approval

17mm

The 380 series lamps have been released and blister packed with a chrome bracket that allows them to be surface mounted without the need for a cut out. The brackets are also available separately in chrome, white and black.

Part No

380CR12

380CA12

380CW12

Voltage:

12 Volt only

12 Volt only

12 Volt only

Cable:

40cm

40cm

40cm

Current:

@13.8Volts (Stop-0.16Amps) (Tail-0.04Amps) (Ind-0.18Amps) (Rev-0.14Amps) - @28Volts (Stop-0.12Amps) (Tail-0.01Amps) (Ind-0.10Amps) (Rev-0.09Amps).

C.R.N

(Stop/tail 39473) (Indicator 39470)

Fitting:

Surface mount bracket and lights horizontally to ground with screws provided, please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

35


ADR approved

Recessed Lamps - 134mm x 87mm x 25mm 87mm

• 131RM • Stop/Tail

• 131AM • Indicator

• 131WM • Reverse 134mm

25mm

5 Y E A R

117mm

W N EDUCT

W N EDUCT

PRO

W N EDUCT

PRO

W A R R A N T Y

PRO

• 131CAM • Indicator • Clear Lens • Amber LEDs

• 131CRM • Stop/Tail • Clear Lens • Red LEDs

167mm

44mm

139mm

Cut out size

91mm

Bracket 109mm

136mm

157mm

W N EDUCT

W N EDUCT

PRO

PRO

12mm 89mm

Cut out size

Grommet

Product Description:

The 131 series lamps are fully water proof and shock resistant. ADR compliant for both horizontal or vertical mount. They are retro fit to same shape designs. Grommet (59401) or bracket (59401B or 59401C).

Part No

131RM

131CRM

131AM

131CAM

131WM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

15cm

15cm

15cm

15cm

15cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts (Stop-TBAAmps) (Tail-TBAAmps) (Ind-TBAAmps) (Rev-TBAAmps) - @28Volts (Stop-TBAAmps) (Tail-TBAAmps) (Ind-TBAAmps) (Rev-TBAAmps)

C.R.N:

(Stop/tail TBA) (Indicator TBA) (Reverse TBA)

Fitting:

Retro fit to existing rectangle lamps. If new installation, fit grommet or flange into cutout (cut out 139mm x 91mm), run wires through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions.

Recessed Lamps - 134mm x 86mm x 50mm • 5590RM • Stop/Tail

• 5590AM • Indicator

• 5590WM • Reverse (No ADR)

W 5 A R Y R E A A N R T Y

Product Description:

ADR approved

86mm

139mm

91mm

Cut out size

134mm

50mm

The 5590 series lamps are fully submersible and shock resistant. ADR compliant for vertical position. They are retro fit to same shape designs. Plug (53102), grommet (59101) or bracket (59401B or 59401C) required if new installation. No ADR on the reverse lamp.

Part No

5590RM

5590AM

5590WM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Plug:

Part no. 53102

Part no. 53102

Part no. 53102

Packaging:

Poly bag of 1

Poly bag of 1

Poly bag of 1

Current:

@13.8Volts (Stop-0.27Amps) (Tail-0.06Amps) (Ind-0.28Amps) (Rev-0.42Amps) - @28Volts (Stop-0.22Amps) (Tail-0.04Amps) (Ind-0.20Amps) (Rev0.25Amps).

C.R.N:

(Stop/tail 33167) (Indicator 33270)

Fitting:

Retro fit to existing rectangle lamps. If new installation, fit grommet or flange into cutout (cut out 139mm x 91mm), plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions.

36

Information Correct at time of printing


ADR/ECE approved Vertical Horizontal

Recessed Lamps - 134mm x 86mm x 48mm • 130RM • 130RMB • Stop/Tail/ Reflector

5

• 130AM • 130AMB • Indicator

• 130RM-1 • Stop/Tail

Y E A R

• 130WM • Reverse

113mm

W A R R A N T Y

160mm

139mm

24mm 91mm 113mm

86mm

109mm

160mm

24mm

139mm

Cut out size

12mm 89mm

91mm

Grommet

136mm

157mm

134mm

Cut out size

48mm

Bracket

109mm

Product Description:

The 130 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. ADR compliant for both horizontal or vertical mount. They are retro fit to same shape designs. Plug (53102), grommet (59401) or bracket (59401B or 59401C) required if new installation.

Part No

130RM

130RM

130RM-1

Voltage:

12-24 Volt

12-24 Volt

Plug:

Part no. 53102

Part no. 53102

Packaging:

Blister of 1

Poly bag of 1

Current:

@13.8Volts (Stop-0.23Amps) (Tail-0.03Amps) (Ind-0.20Amps) (Rev-0.15Amps) - @28Volts (Stop-0.12Amps) (Tail-0.04Amps) (Ind-0.14Amps) (Rev-0.08Amps)

C.R.N:

(Stop/tail RM-1 40655) (Stop/tail RM 36844) (Indicator 36843) (Reverse 36845) (Reflector 38102)

Fitting:

Retro fit to existing rectangle lamps. If new installation, fit grommet or flange into cutout (cut out 139mm x 91mm), plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions.

130RMB-1

130AM

130AMB

130WM

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Part no. 53102

Part no. 53102

Part no. 53102

Part no. 53102

part no. 53102

Blister 12mm of 1

Poly bag of 1

Blister of 1

Poly bag of 1

Blister of 1

157mm

136mm

89mm

Recessed Lamps - 134mm x 86mm x 48mm • 5940R • Stop/Tail

• 5940A • Indicator

• 5940W • Reverse

W 5 A R Y R E A A N R T Y

Product Description:

DOT/SAE approved

86mm

139mm

91mm

Cut out size

134mm

48mm

The 5940 series lamps are fully submersible and shock resistant. They are retro fit to same shape designs. Plug (53102), grommet (59401) or bracket (59401B or 59401C).

Part No

5940R

5940A

5940W

Voltage:

12 Volt

12 Volt

12 Volt

Plug:

part no. 53102

part no. 53102

part no. 53102

Packaging:

Poly bag of 1

Poly bag of 1

Poly bag of 1

Current:

@13.8Volts (Stop-0.57Amps) (Tail-0.08Amps) (Ind-0.60Amps) (Rev-0.23Amps)

C.R.N:

N/A

Fitting:

Retro fit to existing fittings. If new installation fit grommet or flange into cutout (cut out 139mm x 91mm) plug wire into lamp and run through back then push into grommet/flange.

Information Correct at time of printing

37


ADR/ECE approved

Recessed Lamps - 130mm Diameter x 42mm high • 102R • 102RM • Stop/Tail

• 102W • 102WM • Reverse

• 102A • 102AM • Indicator

5

130mm

Y E A R

W N EDUCT

W N EDUCT

PRO

W N EDUCT

PRO

W A R R A N T Y

PRO

• 102RC • Stop/Tail

116mm

42mm

• 102AC • Indicator

Cut out size

W N EDUCT

W N EDUCT

PRO

Product Description:

104mm

PRO

The 102 series lamps are water proof, shock resistant and feature bright output with an attractive inner lens design and low profile exterior.

Part No

102R

102RM

102A

102AM

102W

102WM

102RC

102AC

Voltage:

12 Volt

12-24 Volt

12 Volt

12-24 Volt

12 Volt

12-24 Volt

12 Volt

12 Volt

Cable:

36cm

36cm

36cm

36cm

36cm

36cm

36cm

36cm

Packaging:

Poly Bag of 1

Blister of 1

Poly Bag of 1

Blister of 1

Poly Bag of 1

Blister of 1

Poly Bag of 1

Poly Bag of 1

Current:

@13.8Volts (Stop-0.34Amps) (Tail-0.04Amps) (Ind-0.61Amps) (Rev-0.27Amps) - @28Volts (Stop-TBAAmps) (Tail-TBAAmps) (Ind-TBAAmps) (RevTBAAmps).

C.R.N:

(Stop/tail 42963) (Indicator 42832) (Reverse 42826)

Fitting:

Fit into cutout (cutout 104mm round) using stick on gasket between lamp and fitting surface, run wires at back. Please refer to ADR 13/00 for mounting instructions.

5

Recessed Lamps - 109mm Diameter x 53mm high

Y E A R

• 110RM • 110RMB • Stop/Tail

W A R R A N T Y

• 110WM • 110WMB • Reverse

• 110AM • 110AMB • Indicator

53mm

25mm

109mm

ADR/ECE approved

135mm

15mm

115mm

142mm

Grommet

113mm

Bracket

Product Description:

The 110 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. These lamps retro fit to same shape designs. Plug (53102), grommet (53101) or bracket (53101B or 53101C) required if new installation.

Part No

110RM

110RMB

110AM

110AMB

110WM

110WMB

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Plug:

Part no. 53102

Part no. 53102

Part no. 53102

Part no. 53102

Part no. 53102

Part no. 53102

Packaging:

Blister of 1

Poly Bag of 1

Blister of 1

Poly Bag of 1

Blister of 1

Poly Bag of 1

Current:

@13.8Volts (Stop-0.23Amps) (Tail-0.08Amps) (Ind-0.16Amps) (Rev-0.21Amps) - @28Volts (Stop-0.14Amps) (Tail-0.02Amps) (Ind-0.13Amps) (Rev0.15Amps).

C.R.N:

(Stop/tail 35299) (Indicator 35298) (Reverse 36102)

Fitting:

Retro fit to existing 4 inch lamps. If new installation fit grommet or flange into cutout (Cut out 115mm round) plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions.

38

Information Correct at time of printing


Recessed Lamps - 109mm Diameter x 56mm high 109mm

• 5570R • Stop/Tail

W 5 A R Y R E A A N R T Y

• 5570A • Indicator

DOT/SAE approved

• 5570W • Reverse

56mm

Cut out size 115mm

Product Description:

The 5570 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. They are retro fit to same shape designs. Plug (53102), grommet (53101) or bracket (53101B or 53101C) required if new installation.

Part No

5570R

5570A

5570W

Voltage:

12 Volt

12 Volt

12 Volt

Use part no. 53102

Use part no. 53102

Plug:

Use part no. 53102

Current:

@13.8Volts (Stop-0.42Amps) (Tail-0.02Amps) (Ind-0.42Amps) (Rev-0.78Amps)

Fitting:

Retro fit to existing fittings if new installation fit grommet or flange into cutout (cut out 115mm diameter) plug wire into lamp and run through back then push into grommet/flange.

Recessed Lamps - 109mm Diameter x 56mm high

DOT/SAE approved 109mm

• 5575R • Stop/Tail

W 5 A R Y R E A A N R T Y

• 5575A • Indicator

• 5575W • Reverse

56mm

Cut out size 115mm

Product Description:

The 5575 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. They are retro fit to same shape designs. Plug (53102), grommet (53101) or bracket (53101B or 53101C) required if new installation.

Part No

5575R

5575A

5575W

Voltage:

12 Volt

12 Volt

12 Volt

Use part no. 53102

Use part no. 53102

Plug:

Use part no. 53102

Current:

@13.8Volts (Stop-0.34Amps) (Tail-0.28Amps) (Ind-0.42Amps) (Rev-0.66Amps)

Fitting:

Retro fit to existing fittings if new installation fit grommet or flange into cutout (cut out 115mm diameter) plug wire into lamp and run through back then push into grommet/flange.

DOT/SAE approved

Recessed Lamps - 109mm Diameter x 39mm high • 5523R • Stop/Tail

W 5 A R Y R E A A N R T Y

• 5523A • Indicator

• 5525W • Reverse

109mm

39mm

Cut out size 115mm

Product Description:

The 5523 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. They are retro fit to same shape designs. Plug (55062), grommet (53101) or bracket (53101B or 53101C) required if new installation.

Part No

5523R

5523A

5525W

Voltage:

12 Volt

12 Volt

12 Volt

Use part no. 55062

Use part no. 55062

Plug:

Use part no. 55062

Current:

@13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.29Amps)

Fitting:

Retro fit to existing fittings if new installation fit grommet or flange into cutout (cut out 115mm diameter) plug wire into lamp and run through back then push into grommet/flange.

Information Correct at time of printing

39


5

DOT/SAE approved

Recessed Lamps - 139mm Diameter x 22mm high • 5543FR • Stop/Tail • Reflector

Y E A R

• 5543FA • Indicator • Reflector

• 5543FW • Reverse • Reflector

W A R R A N T Y

139mm

22mm

Cut out size 108mm

Product Description:

The 5543F series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. They are retro fit to same shape designs.

Part No

5543FR

5543FA

5543FW

Voltage:

12 Volt

12 Volt

12 Volt

Cable:

26cm with plug

26cm with plug

26cm with plug

Current:

@13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.26Amps)

Fitting:

Retro fit to existing fittings, plug into existing loom and fix with screws through three fixing points.

5

Recessed Lamps - 140mm Diameter x 39mm high

Y E A R

• 5513R • Stop/Tail

• 5513A • Indicator

• 5513W • Reverse

W A R R A N T Y

Cut out size • 55062

The 5513 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE.

Part No

5513R

5513A

5513W

Voltage:

12 Volt

12 Volt

12 Volt

Use Part number 55062

Use Part number 55062

Plug:

Use Part number 55062

Current:

@13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.26Amps)

Fitting:

Retro fit to existing fittings, wire into existing loom and fix with screws through three fixing points.

Round Lamps - 177mm Diameter x 25mm high

Y E A R

• 5585R • Stop/Tail

• 5585A • Indicator

• 5585W • Reverse

W A R R A N T Y

110mm

DOT/SAE approved 158mm

158mm

177mm 25mm

Product Description:

The 5585 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE.

Part No

5585R

5585A

5585W

Voltage:

12 Volt

12 Volt

12 Volt

Cable:

20cm Hard wired

20cm Hard wired

20cm Hard wired

Current:

@13.8Volts (Stop-0.30Amps) (Tail-0.07Amps) (Ind-0.33Amps) (Rev-0.31Amps)

Fitting:

Retro fit to existing fittings, wire into existing loom and fix with screws through four fixing points.

40

140mm

39mm

Product Description:

5

DOT/SAE approved

Information Correct at time of printing


Round Lamps - 144mm Diameter x 22mm high

5

• 5543R • Stop/Tail

Y E A R

• 5543A • Indicator

DOT/SAE approved

• 5543W • Reverse

144mm

W A R R A N T Y

22mm

Product Description:

The 5543 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. They are retro fit to same shape designs.

Part No

5543R

5543A

5543W

Voltage:

12 Volt

12 Volt

12 Volt

Cable:

20cm Hard wire

20cm Hard wire

20cm Hard wire

Packaging:

Poly bag of 1

Poly bag of 1

Poly bag of 1

Current:

@13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.15Amps)

C.R.N:

N/A

Fitting:

Retro fit to existing fittings, wire into existing loom and fix with screws through three fixing points.

ADR approved

Oval Lamps - 200mm x 94mm x 28mm 5 Y E A R

• 5437R • Stop/Tail

• 5437A • Indicator

• 5437W • Reverse No ADR

200mm

W A R R A N T Y

94mm

184mm

200mm 28mm

94mm

184mm

28mm

Product Description:

The 5437 series lamps are fully submersible, shock resistant and have been reworked to be ADR compliant (except reverse lamp). Available as 12 volt only.

Part No

5437R

5437A

5437W

Voltage:

12 Volt

12 Volt

12 Volt

Cable:

20cm Hard wired

20cm Hard wired

20cm Hard wired

Packaging:

Poly bag of 1

Poly bag of 1

Poly bag of 1

Current:

@13.8Volts (Stop-0.30Amps) (Tail-0.02Amps) (Ind-0.43Amps) (Rev-0.41Amps)

C.R.N:

(Stop/tail 37675) (Indicator 37674)

Fitting:

Remove chrome bezel and fix lamp onto flat surface horizontally to the ground through two screw holes, run wires from back of lamp, click bezel back into place. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

41


Recessed Lamps - 164mm x 58mm x 39mm 164mm • 5503R • Stop/Tail

• 5503A 58mm • Indicator

DOT/SAE approved • 5505W • Reverse

164mm

58mm

39mm

164mm

171mm

5 YEAR WARRANTY

• 54101

Cut out size

• 55062

39mm

61mm

58mm

171mm

Product Description:

The 5503/5505 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE. Grommet 61mm (54101), Plug (55062)

Part No

5503R

5503A

5505W

171mm

Voltage:

12 Volt

12 Volt

12 Volt

Plug:

Use Part number 55062

Use Part number 55062

Use Part number 55062

Poly bag of 1

Poly bag of 1

61mm

Packaging:

Poly bag of 1

Current:

@13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.29Amps)

Fitting:

Fit grommet into cutout in mounting surface, run wire through back of grommet and plug into back of lamp, push lamp into grommet.

DOT/SAE approved

Recessed Lamps - 192mm x 83mm x 39mm 192mm 108mm

• 5533R • Stop/Tail

83mm

39mm

• 5533A • Indicator

• 5535W • Reverse

192mm 108mm

89mm

83mm 39mm

192mm 89mm

5 YEAR WARRANTY

108mm

165mm

• 55062

Cut out size

58mm

83mm

39mm 89mm

165mm

Product Description:

The 5533/5535 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE.

Part No

5533R

5533A

5535W

Voltage:

12 Volt

12 Volt

12 Volt

Plug:

Use Part number 55062

Use Part number 55062

Use Part number 55062

Poly bag of 1

Poly bag of 1

58mm

Packaging:

Poly bag of 1

Current:

@13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.29Amps)

Fitting:

Fit lamp onto mounting surface with 4 screw points, run wire through back and plug into back of lamp.

39mm 165mm

DOT/SAE approved

Oblong Lamps - 191mm x 84mm x 22mm • 5563R • Stop/Tail

58mm

• 5563A 191mm • Indicator

• 5563W • Reverse 84mm

191mm

5 YEAR WARRANTY

22mm

Product Description:

The 5563 series lamps are fully submersible. These lamps are an American design and pass DOT/SAE.

Part No

5563R

5563A

5563W

Voltage:

12 Volt

12 Volt

12 Volt

84mm

22mm

Cable:

15cm Hard wired

15cm Hard wired

15cm Hard wired

Packaging:

Poly bag of 1

Poly bag of 1

Poly bag of 1

Current:

@13.8Volts (Stop-0.27Amps) (Tail-0.07Amps) (Ind-0.26Amps) (Rev-0.15Amps)

Fitting:

Remove chrome bezel and fix to mounting surface using 4 mounting holes in lamp, run wires through back and then fit chrome bezel back onto lamp.

42

Information Correct at time of printing


135mm 38mm

Front Indicator Lamps - 135mm x 38mm x 24mm 24mm 135mm

135mm

W 5 A R Y R E A A N R T Y

80mm

145mm

• 135CAT1 • 135CAT1/24

80mm

• 135CAT1G

38mm 24mm

ADR/ECE approved 38mm

135mm

24mm

80mm

38mm

48mm

24mm 145mm 80mm

145mm

21mm

133mm

48mm

135CAT1G in active mode

135CAT1 in active mode

48mm

Cut 145mm out

36mm size 21mm

133mm

21mm 48mm

Product Description:

133mmfor small tight spaces. Individual36mm The 135 series lamps are fully submersible, shock resistant and feature our diamond lens pattern, excellent push in 21mm grommet mounted lens for recessed fit or bracket mounted lenses for surface mount with no visible screws.

Part No

135CAT1

135CAT1/24

135CAT1G (Grommet)

Voltage:

12 Volt

24 Volt

12 Volt

Cable:

40cm Hard wired

40cm Hard wired

40cm Hard wired

Blister of 1

Blister of 1

36mm

133mm 36mm

Packaging:

Blister of 1

Current:

@13.8Volts (Front Indicator-0.39Amps) -

C.R.N:

(Front Indicator 12 volt 39340, 24 volt 42131)

Fitting:

For bracket lamp, surface mount bracket onto flat surface horizontally to the ground with screws or plugs provided, run wires through back & clip lens into place. For grommet lamp, recess mount grommet into flat surface (cut out for grommet 133mm x 36mm) horizontally to the ground, run wires through back & push lens into place. Refer to ADR 13/00 for mounting instructions.

@28Volts (Front Indicator-0.17Amps)

ADR/ECE approved

Front Indicator/Marker Lamps W 5 A R Y R E A A N R T Y

200mm x 50mm x 28mm

200mm 50mm

• 200CAW • 200CAW/24

28mm

Active

Inactive

Product Description:

The 200 series lamps are fully submersible, shock resistant and feature our hexagonal lens pattern with a unique size designed to fit into small spaces. Individual clip in lenses allow easy surface mount with no visible screws.

Part No

200CAW

200CAW/24

Voltage:

12 volt only

24 volt only

Cable:

40cm Hard wired

40cm Hard wired

Packaging:

Box of 1

Box of 1

Current:

@13.8Volts (Indicator-0.44Amps) (Position-0.06Amps) - @28Volts (Indicator-0.15Amps) (Position-0.03Amps)

C.R.N:

(Front Indicator 38794) (Front position 38795)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

ADR/ECE approved

Front Indicator/Marker Lamps W 5 A R Y R E A A N R T Y

175mm x 50mm x 24mm

175mm 24mm

50mm

• 175AW

Inactive

Active

Product Description:

The 175 series lamps are fully submersible, shock resistant and feature our new diamond lens pattern with a unique size designed to fit into most common front bull bars. Individual clip in lenses allow easy mount to existing fitting with no visible screws.

Part No

175AW

Voltage:

12 volt only

Cable:

40cm Hard wired

Packaging:

Blister of 1

Current:

@13.8Volts (Indicator-0.32Amps) (Position-0.03Amps)

C.R.N:

(Front Indicator 42822) (Front position 42821)

Fitting:

Surface mount bracket plate onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

43


ADR/ECE approved

Marker Lamps - 70mm x 35mm x 20mm 70mm

5 Y E A R W A R R A N T Y

35mm

• 36RM • Rear end outline

W N EDUCT

• 36AM • Side direction indicator

PRO

• 36CRM • Rear end outline

Product Description:

• 36ARM • Side marker

W N EDUCT PRO

• 36CAM • Side direction indicator

W N EDUCT

• 36WM • Front end outline

W N EDUCT

PRO

• 36CARM • Side marker

20mm

PRO

30mm

Innovative new push in brush clip for mounting, with added 3M tape for security.

• 36CWM • Front end outline

The 36 series marker lamps are fully submersible, shock resistant with a brand new shape and design. These lamps come with push in brush clips and quality 3M tape, only 3 holes required to be drilled in fixing surface and no need for any screws.

Part No

36RM

36CRM

36AM

36CAM

36ARM

36CARM

36WM

36CWM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

16cm

16cm

16cm

16cm

16cm

16cm

16cm

16cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts (Red-TBA Amps) (Amber-TBA Amps) (Amber/Red-TBA Amps) (White-TBA Amps) @28Volts (Red-TBA Amps) (Amber-TBA Amps) (Amber/Red-TBA Amps) (White-TBA Amps)

C.R.N:

(Rear Position TBA) (Side Direction Indicator TBA) (Side marker TBA) (Front position TBA)

Fitting:

Surface mount onto flat surface horizontally to the ground, drill two 6mm holes for brush clips and one 8 mm hole for wire. Ensure 3M tape is fitted before running wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Marker Lamps - 58mm x 35mm x 21mm

ADR/ECE approved

5 Y E A R W A R R A N T Y

58mm • 35RM • 35RMB • 35RM2 • Rear end outline marker

• 35AM • 35AMB • 35AM2 • Side direction indicator

• 35WM • 35WMB • 35WM2 • Front end outline marker

35mm

21mm Chrome • 35CRM • 35CRMB • Rear end outline marker

Product Description:

Chrome • 35CAM • 35CAMB • Side direction indicator

Chrome • 35CARM • 35CARMB • Side marker

Chrome • 35CWM • 35CWMB • Front end outline marker

The 35 series marker lamps are fully submersible, shock resistant, feature our hexagonal lens pattern, and have a slimline design. Individual clip in lenses allow easy surface mount with no visible screws. 35RM - Blister

Part No, Packaging

• 35ARM • 35ARMB • 35ARM2 • Side marker

35AM - Blister

35ARM - Blister

35WM - Blister

35RMB - Bulk

35AMB - Bulk

35ARMB - Bulk

35WMB - Bulk

35CRM - Blister

35CAM - Blister

35CARM - Blister

35CWM - Blister

35CRMB - Bulk

35CAMB - Bulk

35CARMB - Bulk

35CWMB - Bulk

35RM2 - Bulk

35AM2 - Bulk

35ARM2 - Bulk

35WM2 - Bulk

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm standard, 2 metre available

40cm standard, 2 metre available

40cm standard, 2 metre available

40cm standard, 2 metre available

Current:

@13.8Volts (Red-0.12Amps) (Amber-0.10Amps) (Amber/Red-0.10Amps) (White-0.05Amps) @28Volts (Red-0.07Amps) (Amber-0.07Amps) (Amber/Red-0.07Amps) (White-0.04Amps)

CRN#:

(Rear Position 34007) (Side Direction Indicator 33894) (Side marker 34099) (Front position 34008)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

44

Information Correct at time of printing


ADR/ECE approved

Marker Lamps - 74mm x 38mm x 35mm

5 Y E A R W A R R A N T Y

74mm

• 42RMB • Rear end outline

• 42AMB W • Side direction E N DUCT indicator RO P

W N EDUCT

• 42ARMB • Side marker

PRO

• 42WMB • Front end outline

W N EDUCT PRO

38mm

W N EDUCT PRO

35mm

Chrome • 42CRMB • Rear end outline

Product Description:

Chrome • 42CAMB • Side direction indicator

• 42CARMB • Side marker

Chrome

Chrome • 42CWMB • Front end outline

The 42 series marker lamps are fully submersible, shock resistant with a classic shape and design. Individual clip in lenses allow easy surface mount or retro fit, with no visible screws.

Part No

42RMB

42CRMB

42AMB

42CAMB

42ARMB

42CARMB

42WMB

42CWMB

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

16cm

16cm

16cm

16cm

16cm

16cm

16cm

16cm

Packaging:

Box of 10

Box of 10

Box of 10

Box of 10

Box of 10

Box of 10

Box of 10

Box of 10

Current:

@13.8Volts (Red-0.05Amps) (Amber-0.05Amps) (Amber/Red-0.05Amps) (White-0.03Amps) @28Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.03Amps)

C.R.N:

(Rear Position 42839) (Side Direction Indicator 42836) (Side marker 42837) (Front position 42840)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Marker Lamps - 58mm x 35mm x 21mm

ADR/ECE approved

5 Y E A R W A R R A N T Y

58mm • 58RM • 58RMB • 58RM3 • Rear end outline

• 58WM • 58WMB • 58WM3 • Front end outline

• 58ARM • 58ARMB • 58ARM3 • Side marker

35mm

21mm Chrome • 58CRM • 58CRMB • 58CRM3 • Rear end outline

Description:

Part No, Packaging

• 58AM • 58AMB • 58AM3 • Side direction indicator

Chrome • 58CAM • 58CAMB • 58CAM3 • Side direction indicator

• 58CWM Chrome • 58CWMB • 58CWM3 • Side marker

• 58CWM Chrome • 58CWMB • 58CWM3 • Front end outline

The 58 series lamps are water proof, shock resistant with a slimline design. Individual clip in lenses allow easy surface mount with no visible screws. 58RM - Blister

58AM - Blister

58ARM - Blister

58WM - Blister

58RMB - Bulk box of 10

58AMB - Bulk box of 10

58ARMB - Bulk box of 10

58WMB - Bulk box of 10

58CRM - Blister

58CAM - Blister

58CARM - Blister

58CWM - Blister

58CRMB - Bulk box of 10

58CAMB - Bulk box of 10

58CARMB - Bulk box of 10

58CWMB - Bulk box of 10

58RM3 - Bulk

58AM3 - Bulk

58ARM3 - Bulk

58WM3 - Bulk

58CRM3 - Bulk

58CAM3 - Bulk

58CARM3 - Bulk

58CWM3 - Bulk

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm standard, 3 metre available

40cm standard, 3 metre available

40cm standard, 3 metre available

40cm standard, 3 metre available

Current:

@13.8Volts (Red-0.12Amps) (Amber-0.10Amps) (Amber/Red-0.10Amps) (White-0.05Amps) @28Volts (Red-0.04Amps) (Amber-0.04Amps) (Amber/Red-0.040Amps) (White-0.03Amps)

CRN#:

(Rear Position 36840) (Side Direction Indicator 38277) (Side marker 36841) (Front position 36842)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

45


Marker Lamps with Inbuilt Reflector

ADR/ECE approved

135mm x 38mm x 22mm 135mm

5 Y E A R W A R R A N T Y

38mm

• 38RM • 38RMB • Rear end outline marker with reflector

• 38AM • 38AMB • Side direction indicator with reflector

• 38ARM • 38ARMB • Side marker with reflector

• 38WM • 38WMB • Front end outline marker with reflector

22mm

• 38 series coloured brackets available

Product Description:

The 38 series marker lamps are fully submersible, shock resistant, feature our hexagonal lens pattern, and have a slimline design with reflex reflector. Clip on bezel allow easy surface mount with no visible screws. Various coloured brackets available.

Part No

38RM

38RMB

38AM

38AMB

38ARM

38ARMB

38WM

38WMB

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Poly bag of 1

Blister of 1

Poly bag of 1

Blister of 1

Poly bag of 1

Blister of 1

Poly bag of 1

Current:

@13.8Volts (Red-0.05Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) @28Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps)

C.R.N:

(Rear Position 40352) (Side Direction Indicator 40377) (AM - Side marker 40385) (Side marker 40302) (Front position 40353) (Reflector 38101, 38102, 38103)

Fitting:

Surface mount lamp onto flat surface horizontally to the ground with screws provided, run wires through back and clip bezel into place. Please refer to ADR 13/00 for mounting instructions.

ADR/ECE approved

Chrome Marker Lamps with Inbuilt Reflector 135mm x 38mm x 22mm 5 Y E A R W A R R A N T Y

135mm

• 38CRM • Rear end outline marker with reflector

38mm

• 38CAM • Side direction indicator with reflector

22mm

• 38CARM • 38CARMB • Side marker with reflector

• 38CWM • Front end outline marker with reflector

Product Description:

The 38 series marker lamps are fully submersible, shock resistant, feature our hexagonal lens pattern, and have a slimline design with reflex reflector. Clip on chrome bezel allow easy surface mount with no visible screws. Various other coloured brackets also available.

Part No

38CRM

38CAM

38CARM

38CARMB

38CWM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Poly bag of 1

Blister of 1

Current:

@13.8Volts (Red-0.05Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) @28Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps)

C.R.N:

(Rear Position 40352) (Side Direction Indicator 40377) (AM - Side marker 40385) (Side marker 40302) (Front position 40353) (Reflector 38101, 38102, 38103)

Fitting:

Surface mount lamp onto flat surface horizontally to the ground with screws provided, run wires through back and clip bezel into place. Please refer to ADR 13/00 for mounting instructions.

46

Information Correct at time of printing


Marker Lamps with Right Angle Bracket

ADR/ECE approved

160mm x 62mm x 42mm 160mm

5

42mm

Y E A R

• 38RMBKT • Rear end outline marker with reflector

W A R R A N T Y

• 38AMBKT • Side direction indicator with reflector

62mm 38mm

135mm

• 38ARMBKT • 38ARMBKTR • Side marker with reflector

• 38WMBKT • Front end outline marker with reflector

• 38 series coloured brackets available

Product Description:

The 38 series marker lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Slimline design with reflex reflector. Clip on bezel allow easy surface mount with no visible screws.

Part No

38RMBKT

38AMBKT

38ARMBKT

38ARMBKTR

38WMBKT

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1 Right side

Poly bag of 1

Current:

@13.8Volts (Red-0.05Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) @28Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps)

C.R.N:

(Rear Position 40352) (Side Direction Indicator 40377) (AM - Side marker 40385) (Side marker 40302) (Front position 40353) (Reflector 38101, 38102, 38103)

Fitting:

Mount lamp onto flat surface horizontally to the ground with 90° bracket and screws provided, run wires at back through middle hole in bracket. Please refer to ADR 13/00 for mounting instructions.

ADR/ECE approved

Magnetic Marker Lamps 135mm x 38mm x 29mm

135mm 38mm

5 Y E A R W A R R A N T Y

• 38RMMB • Rear end outline marker with reflector

29mm

• 38AMMB • Side direction indicator with reflector

Back view

• 38ARMMB • Side marker with reflector

• 38WMMB • Front end outline marker with reflector Side view showing magnets and grommet separated

Product Description:

The 38 series marker lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Slimline design with reflex reflector. Clip on bezel allow easy surface mount with no visible screws.

Part No

38RMMB

38AMMB

38ARMMB

38WMMB

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

40cm

Packaging:

Poly bag of 1

Poly bag of 1

Poly bag of 1

Poly bag of 1

Current:

@13.8Volts (Red-0.05Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps) @28Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.05Amps)

C.R.N:

(Rear Position 40352) (Side Direction Indicator 40377) (AM - Side marker 40385) (Side marker 40302) (Front position 40353) (Reflector 38101, 38102, 38103)

Fitting:

Mount onto flat metal surface with magnetic base, run wires through back. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

47


Slimline Marker Lamps - 100mm x 44mm x 12mm W 5 A R Y R E A A N R T Y

ECE approved

100mm

• 44RME • Rear end outline marker with Reflector

W N EDUCT PRO

• 44AME • 44AMEB • Side marker with Reflector

W N EDUCT PRO

• 44WME • Front end outline marker with Reflector

W N EDUCT

44mm

PRO

12mm

• 44WRME • Rear end outline marker with Reflector

• 44WAME • Side marker with Reflector

• 44WWME • Front end outline marker with Reflector

Product Description:

These marker lamps are an easy one piece fit with a low profile and including a reflex reflector in the assembly.

Part No

44RME

44WRME

44AME

44AMEB

44WAME

44WME

44WWME

Voltage:

12-24 volt

12-24 volt

12-24 volt

12-24 volt

12-24 volt

12-24 volt

12-24 volt

Cable:

50cm

50cm

50cm

50cm

50cm

50cm

50cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Poly bag

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts (Marker-0.02 Amps) @28Volts (Marker-0.03 Amps)

C.R.N:

R1-E9-02 (Rear Position Component number 6282) E900SM1 (Side marker Component number 1331) A-E9-02(Front position Component number 6283)

Fitting:

Surface mount onto flat surface horizontally with screws, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

ECE approved

Marker Lamps - 110mm x 40mm x 25mm W 5 A R Y R E A A N R T Y

110mm 40mm

25mm

• 1490RM • Rear end outline marker

Product Description:

• 1490AM • Side marker

• 1490WM • Front end outline marker

The 1490/1491 series marker lamps are fully submersible, shock resistant and have a built in reflector. There are two fitting options available, flat surface or 90° bracket .These lamps are E.C.E and E mark approved.

Part No

1490RM

1490AM

1490WM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

20cm

20cm

20cm

Current:

@13.8Volts (Red-0.05Amps) (Amber-0.05Amps) (White-0.05Amps) - @28Volts (Red-0.07Amps) (Amber-0.07Amps) (White-0.04Amps)

C.R.N:

E9 00 SM1 02 1A (Rear Position Component number 1357) (Side marker Component number 1354) (Front position Component number 1358)

Fitting:

Mount lamp onto flat surface horizontally to the ground, 1490 remove lens from base and fix with screws provided, and for 1491 with 90° bracket and screws provided. Please refer to ADR 13/00 for mounting instructions.

Marker Lamps with Bracket 110mm x 64mm x 25mm W 5 A R Y R E A A N R T Y

ECE approved 47mm

110mm

64mm

• 1491RM • Rear end outline marker

• 1491AM • Side marker

• 1491WM • Front end outline marker

25mm

Product Description:

The 1490/1491 series marker lamps are fully submersible, shock resistant and have a built in reflector. There are two fitting options available, flat surface or 90° bracket .These lamps are E.C.E and E mark approved.

Part No

1491RM

1491AM

1491WM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

20cm

20cm

20cm

Current:

@13.8Volts (Red-0.05Amps) (Amber-0.05Amps) (White-0.05Amps) - @28Volts (Red-0.07Amps) (Amber-0.07Amps) (White-0.04Amps)

C.R.N:

E9 00 SM1 02 1A (Rear Position Component number 1357) (Side marker Component number 1354) (Front position Component number 1358)

Fitting:

Mount lamp onto flat surface horizontally to the ground, 1490 remove lens from base and fix with screws provided, and for 1491 with 90° bracket and screws provided. Please refer to ADR 13/00 for mounting instructions.

48

Information Correct at time of printing


W 5 A R Y R E A A N R T Y

Marker Lamps - 96mm x 58mm x 49mm

DOT/SAE approved

96mm

58mm

49mm

• 1440A

• 1440R

• 1440W

Product Description:

These marker lamps are fully submersible and shock resistant, with chrome. Perfect for the budget conscious consumer.

Part No

1440R

1440A

1440W

Voltage:

12 Volt

12 Volt

12 Volt

Cable:

10cm

10cm

10cm

Current:

@13.8Volts (Red-0.04Amps) (Amber-0.03Amps) (White-0.03Amps)

Fitting:

Remove screws from front of lens, run wires through rubber grommet and 23mm hole in fixing surface. Place bracket horizontal to ground and fix with self tapping screw in assembly, ensure “TOP” is at the top, and then refix lens into place with screws.

DOT/SAE approved

Marker Lamps - 169mm x 55mm x 24mm W 5 A R Y R E A A N R T Y

• 1388W

• 1388A

• 1388R

169mm 55mm

• 1374R

• 1374A Clear lens red LEDs

Product Description:

24mm

Clear lens amber LEDs

These marker lamps are fully submersible and shock resistant. Coloured lens with coloured LED’s or clear lens with coloured LED’s both with chrome bezel.

Part No

1388R

1388A

1388W

1374R

1374A

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

20cm

20cm

20cm

20cm

74mm

38mm

20cm 74mm

Current:

@13.8Volts (Red-0.07Amps) (Amber-0.12Amps) (White-0.24Amps)

Fitting:

Remove bezel and surface mount lamp with screws provided, run wires through back and fit bezel over lamp.

25mm

38mm 105mm

Marker Lamps -

105mm x 31mm x 30mm

DOT/SAE31mm approved

25mm 105mm

30mm

31mm

• 1474R

• 1474A

• 1474W

Marker Lamps -

30mm

• 12612

74mm x 38mm x 25mm

• 12611

74mm

38mm 74mm 25mm

38mm

5 YEAR WARRANTY

105mm 25mm

• 1459R Product Description:

• 12572

• 1459A

• 12571

31mm

105mm 31mm

These marker lamps are fully submersible and shock resistant, with chrome or black bases available separately.

Part No

1474R

1474A

1474W

1459R

1459A

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

20cm

20cm

20cm

20cm

20cm

Current:

@13.8Volts (Red-0.04Amps) (Amber-0.04Amps) (White-0.04Amps)

Fitting:

Fit base to fixing surface run wire through back of base and plug into positive outlet in back of lamp, push lamp into base with negative outlet slotting into female earth in base. Lamps require bases for fitting.

30mm

30mm

@13.8Volts (Red-0.05Amps) (Amber-0.06Amps)

Information Correct at time of printing

49


Marker Lamps - 74mm x 38mm x 26mm W 5 A R Y R E A A N R T Y

ADR approved

74mm 38mm

26mm

• 1458RM • Rear end outline marker

• 1458AM • Side direction indicator

• 1458ARM • Side marker

• 1458WM • Front end outline marker

• 1458BC

Product Description:

The 1458 series marker lamps are designed for the budget conscious consumer, fully submersible and shock resistant. Individual clip in lenses allow easy surface mount with no visible screws. Available in single bulk packs.

Part No

1458RM

1458AM

1458ARM

1458WM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

20cm

20cm

20cm

20cm

Current:

@13.8Volts (Red-0.06Amps) (Amber-0.06Amps) (Amber/Red-0.06Amps) (White-0.03Amps) @28Volts (Red-0.05Amps) (Amber-0.05Amps) (Amber/Red-0.05Amps) (White-0.04Amps)

C.R.N:

(Rear Position 39437) (Side Direction Indicator 39436) (Side marker 39468) (Front position 39438)

Fitting:

Surface mount bracket onto flat surface horizontally to the ground with screws provided, run wires through back and clip lens into place please refer to ADR 13/00 for mounting instructions.

Marker Lamps W 5 A R Y R E A A N R T Y

152mm x 52mm x 29mm • 1685AM • 1685AB • Rear end outline marker

• 1685RB • Rear end outline marker

ADR (amber) DOT/SAE approved

152mm 152mm

52mm 52mm 29mm

Marker Lamps -

29mm

149mm x 52mm x 35mm

• 1284R • Rear end outline marker

149mm

DOT/SAE approved

149mm

• 1284A • Rear end outline marker

52mm 52mm

35mm 35mm

Product Description:

The 1685 and the 1284 series marker lamps are fully submersible and shock resistant. Slimline design with reflex reflector.

Part No

1685RB

1685AM

1685AB

1284R

1284A

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12 Volt

12 Volt

Cable:

29cm

29cm

29cm

15cm

15cm

Packaging:

Poly bag of 1

Blister of 1

Poly bag of 1

Poly bag of 1

Poly bag of 1

Current:

@13.8Volts (Red-0.05Amps) (Amber-0.05Amps)

C.R.N:

(1685AM Side Marker 39221) (1685AM Reflector 39222)

Fitting:

Surface mount lamp onto flat surface horizontally to the ground with screws provided, run wires through back, please refer to ADR 13/00.

Marker Lamps -

1685AM only @28Volts (Amber-0.04Amps)

79mm x 51mm x 24mm

• 1282R • Red marker

W 5 A R Y R E A A N R T Y

79mm 79mm

• 1282A • Amber marker

51mm 51mm

DOT/SAE approved

24mm 24mm

Marker Lamps -

102mm 102mm

102mm x 19mm x 35mm

• 1369R • Red marker

19mm 19mm

• 1369A • Amber marker

76mm 76mm 35mm 35mm

Description:

The 1282 and the1369 series marker lamps are fully submersible and shock resistant. Slimline design. Perfect for the budget conscious consumer.

Part No

1282R

1282A

1369R

1369A

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

13cm

13cm

16cm hard wired with round connectors

Current:

@13.8Volts (Red-0.06Amps) (Amber-0.05Amps)

@13.8Volts (Red-0.05Amps) (Amber-0.05Amps)

Fitting:

Remove lens from base and fit onto flat surface using single bolt supplied. Run wire through hole in base, refit lens into place.

Surface mount lamp with screws, run wires at back of lamp through hole in mounting surface.

50

Information Correct at time of printing


94mm

Marker Lamps -

71mm

DOT/SAE approved

19mm19mm

58mm

71mm

94mm 94mm

• 1479R • Red marker

17mm

76mm

• 1477A • Amber marker

• 12761

94mm

• 3591

94mm

• 1479A • Amber marker

19mm 19mm

• 1477R • Red marker

17mm

58mm

Cut out 76mm

71mm

17mm 17mm

W 5 A R Y R E A A N R T Y

71mm Diam x 17mm high, 94mm71mm Diam x 19mm high

• 12781

19mm

Cut out 58mm

These marker lamps are fully submersible, shock resistant and are suited for the budget conscious consumer.

58mm

Part No

1477R

1477A

1479R

1479A

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

Use Part number 3591

Use Part number 3591

Use Part number 3591

Use Part number 3591 76mm

Current:

@13.8Volts (Red-0.04Amps) (Amber-0.05Amps)

Fitting:

Fit grommet into cut out in fixing surface, run wires through back and plug into back of lamp, push lamp into grommet.

58mm 58mm

76mm

76mm

28mm

76mm

Marker Lamps - 28mm Diameter x 25mm high • 181RME • Red marker

W 5 A R Y R E A A N R T Y

19mm

Product Description:

• 181AME • Amber marker

W N EDUCT

28mm

• 181WME • White marker

W N EDUCT

PRO

ECE approved 20mm

W N EDUCT

PRO

25mm

Cut out

PRO

25mm

Product Description:

These extremely low profile marker lamps are water proof, shock resistant and have a tough rubber housing with sheathed cable for added 20mm protection. They are perfect for small tight spaces.

Part No

181RME

181AME

181WME

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

20cm

20cm

20cm

Packaging:

Blister pack of 1

Blister pack of 1

Blister pack of 1

Current:

@13.8Volts (Red-0.03Amps) (Amber-0.03Amps) (White-0.03Amps)

C.R.N:

ADR compliant under ECE approval (02R1 E9 CRN 6257) (00SM1 E9 CRN 1005) (02A E9 CRN 6258)

Fitting:

Mount onto flat surface and push lamp and rubber housing into cutout (20mm in diameter) in mounting surface. Please refer to ADR13/00.

Rubber Marker Lamps Rubber Marker Lamps -

ADR/ECE approved

193mm x 169mm x 66mm 101mm x 82mm x 66mm

169mm

66mm

• 1004ARM • Side marker

W 5 A R Y R E A A N R T Y

193mm

101mm 66mm

• 1005WRM • Side marker

82mm

• 1004R • 1004L • Side marker

• 1004RE • 1004LE • Side marker

69mm

Product Description:

These marker lamps are fully submersible, shock resistant and are suited for the budget conscious consumer.

Part No

1004R

1004L

1004RE

1004LE

1004ARM

1005WRM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm from lens

40cm from lens

40cm from lens

40cm from lens

40cm

40cm

Current:

@13.8Volts (Red-0.03Amps) (Amber-0.06Amps) (White - 0.02) - @28Volts (Red-0.04Amps) (Amber-0.06Amps) (white-0.03)

C.R.N:

TBA

Fitting:

Fix to flat surface, amber facing forward and red facing to the back with two bolts supplied.

TBA

(Red 02 R1 E4 7895) (White 02A E4 7895)

Information Correct at time of printing

43129

(Red 02 R1 E4 7895)

51


Licence Plate Lamps - 76mm x 42mm x 30mm W 5 A R Y R E A A N R T Y

ADR/ECE approved

76mm 42mm

• 35BLM • 35BLMB

• 35BLM1P • 1 metre of cable with plug

• 35BLM6 • 6 metre of cable hard wire 76mm 30mm

• 35CLM • 35CLMB

42mm

64mm

Product Description:

The 35 series licence plate lamps are fully submersible and shock proof. Also available with 6 metres of hard wired cable or with 1 metre ending in a plug which clips into the back of the 100, 150 and 275 series Generation II lamps.

Part No

35BLM

35BLMB

35CLM

35CLMB

35BLM1P

35BLM6

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-2464mm Volt

Cable:

40cm

40cm

40cm

40cm

1 Metre with plug

6 Metre no plug

Packaging:

Blister of 1

Poly Bag of 1

Blister of 1

Poly Bag of 1

Blister of 1

Poly Bag of 1

30mm

65mm

Current:

@13.8Volts (Licence-0.04Amps) - @28Volts (Licence-0.04Amps) .

C.R.N:

(Licence 36280)

Fitting:

Fit onto flat surface, 25mm from top centre, long edge of licence plate with lens facing towards the ground. Refer to ADR 13/00 for fitting instructions.

30mm

24mm

65mm 65mm

Licence Plate Lamps  -  65mm x 30mm x 24mm, 69mm x 54mm x 40mm 30mm 30mm

W 5 A R Y R E A A N R T Y

ADR/ECE approved

DOT/SAE approved

69mm 65mm

24mm

• 30BLM • 6434BWM

Product Description:

24mm 24mm

30mm 54mm 69mm 69mm

54mm 54mm

40mm

• 30CLM • 6434CWM

69mm

• 65362 No ADR

The 30 series (6434) licence plate lamps are fully submersible, shock resistant and are suited for the budget conscious consumer. Can also be used for general illumination.

54mm Illumination lamp, can be 40mm used as a courtesy lamp. 40mm

Part No

30BLM

6434BWM

30CLM

6434CWM

65362

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12 Volt 40mm

Cable:

14cm

14cm

14cm

14cm

40cm hard wired

Packaging:

Blister pack of 2

Poly bag of 1

Blister pack of 2

Poly bag of 1

Poly bag of 1

Current:

@13.8Volts (Licence-0.02Amps) - @28Volts (Licence-0.03Amps)

@13.8Volts (0.11Amps)

C.R.N:

(Licence plate lamps 40511)

N/A

Fitting:

Run wires through hole in flat fitting surface, ensure foam gasket is between lamp and surface, fix using screws supplied. You will require one lamp on the left and right side of the licence plate. Please refer to ADR 13/00.

Fit onto flat surface using bolts in assembly.

ADR/ECE approved

Licence Plate Lamps - 375mm x 173mm x 25mm W 5 A R Y R E A A N R T Y

375mm

173mm

25mm

LP1 with Sample of a Licence plate fitted, shown active.

• LP1 • LP1B Product Description:

The licence plate frame allows the licence plate to be fitted underneath the two licence plate lamps all in one housing. Comes with 1 metre of cable ending in a plug which clips into the back of the 100, 150 and 275 series Generation II lamps.

Part No

LP1

LP1B

Voltage:

12-24 Volt

12-24 Volt

Cable:

1 metre

1 metre

Packaging:

Blister of 1

Box of 1

Current:

@13.8Volts (Licence-0.11Amps) - @28Volts (Licence-0.07Amps)

C.R.N:

(Licence plate lamp 39611)

Fitting:

Fixes into same screw pattern as standard Australian licence plate, then wire clips into back of Generation II lamp. Fit up to 1 metre away from lamps.

52

Information Correct at time of printing


Marine Navigation Lamps - 76mm x 52mm x 24mm W 5 A R Y R E A A N R T Y

ATAC approved

76mm

• 52WW • Stern/Towing Lamp

• 52CW • Stern/Towing Lamp

52mm

24mm

Product Description:

The 52 series navigation lamps are fully submersible, shock resistant and comply with A.T.A.C standards. Slimline design. Removable backing plate allows easy surface mount with no visible screws.

Part No

52WW

52CW

Voltage:

12-24 Volt

12-24 Volt

Cable:

18cm Hard wired

18cm Hard wired

Packaging:

Blister pack of 1

Current:

@13.8Volts (White-0.18Amps)

Fitting:

Remove back plate with small screw driver and fix at two screw points with screws supplied, clip lamp and housing in place.

Blister pack of 1 - @28Volts (White-0.10Amps)

Marine Navigation Lamps - 76mm x 52mm x 25mm W 5 A R Y R E A A N R T Y

ATAC approved 76mm

• 52WR • Portside

• 52CR • Portside

• 52WG • Starboard

• 52CG • Starboard

52mm

25mm

Product Description:

The 52 series navigation lamps are fully submersible, shock resistant and comply with A.T.A.C standards. Slimline design. Removable backing plate allow easy surface mount with no visible screws.

Part No

52WR

52CR

52WG

52CG

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

18cm Hard wired

18cm Hard wired

18cm Hard wired

18cm Hard wired

Packaging:

Blister pack of 1

Blister pack of 1

Blister pack of 1

Blister pack of 1

Current:

@13.8Volts (Red-0.08Amps) (Green-0.12Amps) - @28Volts (Red-0.18Amps) (Green-0.20Amps)

Fitting:

Remove back plate with small screw driver and fix at two screw points with screws supplied, clip lamp and housing in place.

Marine Interior Lamps - 143mm Diameter x 40mm high W N EDUCT

W N EDUCT

PRO

PRO

• 143RWW Active Red

W 5 A R Y R E A A N R T Y

• 143RWC Active Red 143mm

• 143RWW Active White

• 143RWC Active White

W N EDUCT

W N EDUCT

40mm

PRO

PRO

Product Description:

Dual colour marine lamp red and white. Red light night vision, no glare and non sensitive at night. Multi purpose applications in all areas where night vision is required when sensitivity to the eyes is important. With the coloured ambient light our night vision lamps are easy on the eye when coming from darkness. On/Off Switch for separate colours. Interior use only.

Part No

143RWW

143RWC

Voltage:

12 Volt

12 Volt

Cable:

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Illuminance:

White @ 1 metre - TBA - Red @ 1 metre - TBA

Current:

White @13.8Volts 0.33Amps - Red @13.8Volts 0.33Amps

Fitting:

Remove bezel and surface mount using three screw points, run wires through hole in mounting surface and refit bezel by clicking into place.

Information Correct at time of printing

53


Flood Lamps - 114mm x 48mm x 71mm • 7150BM 5 x 0.5 watt LEDs

114mm

5

48mm

Y E A R

71mm • 7150WM 5 x 0.5 watt LEDs

W A R R A N T Y

4m 2m 0 2m 4m Distance in Metres

5m

10m

15m

20m

25m

30m

40m

Product Description:

These work lamps are waterproof and sea/salt spray resistant, with durable powder coated aluminium housing, and high impact acrylic lens. Powered by 5 high brightness 0.5 watt LED’s. Ideal for lighting rear of boats from rocket launchers.

Part No

7150BM - Black Housing

7150WM - White Housing

Voltage:

12-24 Volt

12-24 Volt

Cable:

30cm sheathed hard wired

30cm sheathed hard wired

Packaging:

Blister hang/stand pack of 1

Blister hang/stand pack of 1

Illuminance:

@ 1 metre - 300lx

Current:

@13.8Volts 0.30Amps - @28Volts 0.19Amps

Fitting:

Fix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied.

Flood Lamps - 169mm x 60mm x 77mm • 7790BM 9 x 1 watt LEDs

169mm

5

60mm

Y E A R

77mm

• 7790WM 9 x 1 watt LEDs

W A R R A N T Y

6m 4m 2m 0 2m 4m 6m Distance in Metres

5m

10m

15m

20m

25m

30m

40m

Product Description:

These work lamps are waterproof and sea/salt spray resistant, with durable powder coated aluminium housing, and high impact acrylic lens. Powered by 9 high brightness 1 watt LED’s. Ideal for the rear of any vehicle needing intense illumination.

Part No

7790BM - Black Housing

7790WM - White Housing

Voltage:

12-24 Volt

12-24 Volt

Cable:

30cm sheathed hard wired

30cm sheathed hard wired

Packaging:

Blister hang/stand pack of 1

Blister hang/stand pack of 1

Illuminance:

@ 1 metre - 520lx

Current:

@13.8Volts 0.97Amps - @28Volts 0.44Amps

Fitting:

Fix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied.

54

Information Correct at time of printing


Work Lamps - 150mm x 115mm x 41mm 150mm

5

• 7451BM 6 x 1 watt LEDs

Y E A R

92mm

• 7451WM 6 x 1 watt LEDs

115mm

41mm

W A R R A N T Y

6m 4m 2m 0 2m 4m 6m 5m

Distance in Metres

10m

15m

20m

25m

30m

Product Description:

These work lamps are waterproof and sea/salt spray resistant, with durable powder coated aluminium housing, polycarbonate lens. Powered by 6 high brightness 1 watt LED’s.

Part No

7451BM - Black Housing

7451WM - White Housing

Voltage:

12-24 Volt

12-24 Volt

Cable:

30cm sheathed hard wired

30cm sheathed hard wired

Packaging:

Blister hang/stand pack of 1

Blister hang/stand pack of 1

Illuminance:

@ 1 metre - 3500lx

Current:

@13.8Volts 0.75Amps - @28Volts 0.38Amps

Fitting:

Fix to mounting surface using stainless steel bolt and bracket supplied.

Work Lamps - 158mm x 129mm x 90mm

40m

129mm

5 • 7450B12 • 7450B24 6 x 1 watt LEDs

Y E A R

158mm

• 7450W12 • 7450W24 6 x 1 watt LEDs 90mm

W A R R A N T Y 4m 2m 0 2m 4m Distance in Metres

5m

10m

15m

20m

25m

Product Description:

These work lamps are waterproof and sea/salt spray resistant, with durable powder coated aluminium housing, polycarbonate lens and ABS adjustable or removable visor. Powered by 6 high brightness 1 watt LED’s.

Part No

7450B12- Black Housing

7450B24 - Black Housing

7450W12 - White Housing

40m

7450W24 - White Housing

Voltage:

12 Volt

24 Volt

12 Volt

24 Volt

Cable:

30cm sheathed hard wired

30cm sheathed hard wired

30cm sheathed hard wired

30cm sheathed hard wired

Packaging:

Blister hang/stand pack of 1

Blister hang/stand pack of 1

Blister hang/stand pack of 1

Blister hang/stand pack of 1

Illuminance:

@ 1 metre - 2800lx

Current:

@13.8Volts 1.29Amps - @28Volts 0.30Amps

Fitting:

Fix to mounting surface using stainless steel bolt and bracket supplied.

Information Correct at time of printing

30m

55


Work Lamps - 121mm x 110mm x 45mm W N EDUCT

• 7208MS 8 x 1 watt LEDs

W 5 A R Y R E A A N R T Y

PRO

45mm

110mm 30m 20m 10m 0

121mm

10m 20m 30m 50m

Distance in Metres

150m

100m

Work Lamps - 142mm x 115mm x 50mm W N EDUCT

• 7208MR 8 x 1 watt LEDs

W 5 A R Y R E A A N R T Y

PRO

115mm

50mm

30m 20m 10m 0

142mm

10m 20m 30m 50m

Distance in Metres

150m

100m

Work Lamps - 117mm x 88mm x 71mm W N EDUCT

• 7210M 10 x 1 watt LEDs

W 5 A R Y R E A A N R T Y

PRO

70mm

88mm

10m 5m

117mm

0 5m 10m Distance in Metres

10m

20m

30m

40m

50m

60m

70m

80m

90m

Work Lamps - 138mm x 114mm x 108mm W N EDUCT

• 7220M 20 x 1 watt LEDs

W 5 A R Y R E A A N R T Y

PRO

108mm

114mm 10m 5m

138mm

0 5m 10m Distance in Metres

10m

20m

30m

40m

50m

60m

70m

80m

90m

100m

Product Description:

These work lamps are waterproof and sea/salt spray resistant, with durable powder coated aluminium housing, and polycarbonate lens. Powered by high brightness 1 watt LED’s. Packaged in a blister hang/stand pack.

Part No

7208MS

7208MR

7220M

7210M

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

50cm sheathed hard wired

50cm sheathed hard wired

50cm sheathed hard wired

50cm sheathed hard wired

Illuminance:

@ 1 metre - TBAlx

@ 1 metre - TBAlx

@ 1 metre - TBAlx

@ 1 metre - TBAlx

Current:

@13.8V 0.90Amps - @28V 0.44Amps

@13.8V 1.05Amps - @28V 0.51Amps

@13.8V 0.30Amps - @28V 1.15Amps

@13.8V 0.67Amps - @28V 1.37Amps

Fitting:

Fix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied.

56

Information Correct at time of printing


Heavy Duty Work Lamps - 170mm x 110mm x 86mm 5

• 856BM 6 x 1 watt LEDs

W N EDUCT

Y E A R

170mm

86mm

110mm

PRO

W A R R A N T Y

6m

110mm

4m

40mm

2m 0 2m 4m 6m Distance in Metres

10m

20m

30m

40m

50m

Heavy Duty Work Lamps - 208mm x 110mm x 86mm 5

W N EDUCT

208mm

PRO

W A R R A N T Y

86mm

110mm

Y E A R

• 858BM 8 x 1 watt LEDs

6m 4m

110mm

2m

40mm

0 2m 4m 6m Distance in Metres

10m

20m

30m

40m

50m

Heavy Duty Work Lamps - 321mm x 110mm x 86mm 5

• 8514BM 14 x 1 watt LEDs

W N EDUCT

321mm

86mm

PRO

110mm

Y E A R

6m

W A R R A N T Y

4m

262mm

2m

116mm

0 2m 4m 6m Distance in Metres

10m

20m

30m

40m

50m

Product Description:

The 85 series work lamps are waterproof sea/salt spray resistant, and have a durable powder coated aluminium housing, stainless steel fittings, and high impact polycarbonate lens. Powered by high brightness 120° 1 watt LED’s.

Part No

856BM

858BM

8514BM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

1 metre sheathed hard wired

1 metre sheathed hard wired

1 metre sheathed hard wired

Packaging:

Box of 1

Box of 1

Box of 1

Illuminance:

@ 1 metre - 3715lx

@ 1 metre - 4630lx

@ 1 metre - 8460lx

Current:

@13.8Volts 0.77Amps - @28Volts 0.36Amps

@13.8Volts 1.00Amps - @28Volts 0.48Amps

@13.8Volts 1.80Amps - @28Volts 0.78Amps

Fitting:

Fix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied.

Information Correct at time of printing

57


NEW PRODUCT

21/12/2011

10V-30V input voltage High intensity 3W SMD LEDs 100% Water & dust proof IP67 3 year warranty

Shining in the spotlight...

LED Technologies has a brand new edition to its powerful worklamp range. Introducing the all new 84mm round lamp with an aluminium cast casing and polycarbonate lens, this tough lamp is suitable for any heavy duty application. The lamp is IP67 rated and features 4 powerful 3 watt LEDs combined with a complex shape chrome reflector to provide the ultimate in lighting performance. Available in both black and white finishes, with a stainless steel bracket, this compact high performance lamp will suit any extreme application.

Description:

Compact high powered work lamp.

Voltage:

10V-30V

Cable:

50cm hard wired

Packaging:

Single blister hang pack

Current:

@13.8Volts (0.68Amps) @28Volts (0.36Amps)

Warranty:

3 Years Part No.:

84mm

84mm

65mm

LWL8312WM

65mm

111mm

111mm

-5000mm

2000mm

Part No.:

7000mm

12000mm

LWL8312BM

17000mm

22000mm

0

5000mm

www.ledautolamps.com

58

Information Correct at time of printing

P: 03 9464 5939 F: 03 9464 5940


Water Proof Lamps - 75mm diameter x 17mm high • 7524W • 7530W • Interior/Exterior

3 Y E A R

• 7524C • 7530C • Interior/Exterior

• 7524WB • Interior/Exterior • Blue & White LEDs

75mm

W A R R A N T Y

• 7524G • 7530G • Interior/Exterior

• 7524/OPAQUE • 7530/OPAQUE • Interior/Exterior

• 7524WR • Interior/Exterior • Red & White LEDs 17mm

Product Description:

The 75 series white interior or exterior lamps have SMD LED’s, incredible high light output and 120° of light spread. The 75 series blue and red waterproof interior/exterior round lamps are available in blue light for daytime vision ideal for daylight use, or red light for night time vision. No glare & non sensitive when coming from darkness. High brightness SMD LED’s with polycarbonate lens.

Part No

7524W

7524G

7524C

7524/ OPAQUE

7524*

7530W

7530G

7530C

7530/ OPAQUE

7530*

7524WB

7524WR

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

24 Volt

24 Volt

24 Volt

24 Volt

24 Volt

12 Volt

12 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Bag of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Bag of 1

Blister of 1

Blister of 1

Illuminance:

Clear lens 12 volt (@ 1 metre - 37lx) 24 volt (@ 1 metre - 50lx) Opaque lens 12 volt (@ 1 metre - 22lx) 24 volt (@ 1 metre - 28lx)

@1mt-31lx

@1mt-20lx

Current:

@13.8Volts 0.24Amps - @28Volts 0.13Amps

@13.8Volts Blue 0.20Amps, Red 0.15Amps

Fitting:

Remove bezel and surface mount using three screw points, run wires through hole in mounting surface and refit bezel by clicking into place. * 7524 and 7530 supplied without bezel

Recessed Exterior Lamps - 165mm x 102mm x 45mm

• 5100W12

W 3 A R Y R E A A N R T Y

• 5100W24 165mm

102mm

45mm

Product Description:

The 5100 series rectangular interior/exterior lamp are water resistant and will withstand high pressure washing. They are a recessed fit with 30 bright square LED’s.

Part No

5100W12

5100W24

Voltage:

12 Volt

24 Volt

Cable:

N/A

N/A

Packaging:

Box of 1

Box of 1

Illuminance:

@ 1 metre - TBA

Current:

@13.8Volts 0.20Amps - @28Volts 0.10Amps

Fitting:

Recess mount with 4 fixing points with screws into cutout (130mm x 87mm) in fixing surface. Attach wires to side of lamp.

59

Information Correct at time of printing


Interior/Exterior Lamps - 143mm Diameter x 40mm high

3

• 143120W12 • 143120W24 • Interior/Exterior

Y E A R W A R R A N T Y

• 143120C12 • 143120C24 • Interior/Exterior

143mm

40mm

• 143120G12 • 143120G24 • Interior/Exterior

• 143120B12 • 143120B24 • Interior/Exterior

Product Description:

These lamps are interior or exterior, with white 120 SMD LED’s equivalent to a 50 watt globe and incredible high light output with 120° of light spread.

Part No

143120W12

143120G12

143120C12

143120B12

143120W24

143120G24

143120C24

143120B24

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

24 Volt

24 Volt

24 Volt

24 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts 0.46Amps - @28Volts 0.27Amps

Packaging:

Blister of 1

Illuminance:

@ 1 metre - 86lx

Fitting:

Remove bezel and surface mount using three screw points, run wires through hole in mounting surface and refit bezel by clicking into place.

Interior Lamps with On/Door/Off Switch 143mm Diameter x 40mm high

3 Y E A R

• 143ILW12 • 143ILW24 • Interior Only

• 143ILC12 • 143ILC24 • Interior Only 143mm

W A R R A N T Y

• 143ILG12 • 143ILG24 • Interior Only

• 143ILB12 • 143ILB24 • Interior Only

40mm

Product Description:

These lamps are interior only and have an ON/DOOR/OFF switch. 120 white SMD LED’s equivalent to a 50 watt globe give incredible high light output with a 120° light spread.

Part No

143ILW12

143ILG12

143ILC12

143ILB12

143ILW24

143ILG24

143ILC24

143ILB24

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

24 Volt

24 Volt

24 Volt

24 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

40cm

40cm

40cm

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts 0.46Amps - @28Volts 0.27Amps

Packaging:

Blister of 1

Illuminance:

@ 1 metre - 86lx

Fitting:

Remove bezel and surface mount using three screw points, run wires through hole in mounting surface and refit bezel by clicking into place.

Information Correct at time of printing

60


25mm

3 Y E A R

150mm

• 1016 • 1016/24 • 100mm length

600mm

W A R R A N T Y

10mm

25mm

100mm

Interior Lamps - 4 Lengths Available

10mm

• 1031 • 1031/24 • 150mm length 300mm

• 1061 • 1061/24 • 300mm length

• 10121 • 10121/24 • 600mm length Product Description:

These lamps are interior only, using white SMD LED’s with high light output and a 120° light spread. Output equivalent to a 10 watt, 18 watt, 30 watt and 60 watt globe. Low profile design for small spaces, an unobtrusive yet stylish look.

Part No

1016

1031

1061

10121

1016/24

1031/24

1061/24

10121/24

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

24 Volt

24 Volt

24 Volt

24 Volt

Cable:

10cm

10cm

10cm

10cm

10cm

10cm

10cm

10cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Illuminance:

@1metre - 18lx

@1metre - 33lx

@1metre - 62lx

@1metre - 130lx

@1metre - 18lx

@1metre - 33lx

@1metre - 62lx

@1metre - 130lx

Current:

@13.8V 0.11Amps

@13.8V 0.17Amps

@13.8V 0.31Amps

@13.8V 0.58Amps

@28V 0.05Amps

@28V 0.07Amps

@28V 0.17Amps

@28V 0.31Amps

Fitting:

Remove bezel at each end and surface mount using two screw points, run wires through hole in mounting surface and refit bezel by clicking into place. 25mm

Interior Lamps - 4 Lengths Available

10mm

10mm

25mm

100mm

3 Y E A R

600mm

W A R R A N T Y

150mm

• 1016/OPAQUE • 1016/24OPAQUE • 100mm length

• 1031/OPAQUE • 1031/24OPAQUE • 150mm length 300mm

• 1061/OPAQUE • 1061/24OPAQUE • 300mm length

• 10121/OPAQUE • 10121/24OPAQUE • 600mm length Product Description:

These lamps are interior only, using white SMD LED’s with high light output and a 120° light spread. Output equivalent to a 8 watt, 15 watt, 25 watt and 50 watt globe. Low profile design for small spaces, and unobtrusive yet stylish look.

Part No

1016/OPAQUE

1031/OPAQUE

1061/OPAQUE

10121/OPAQUE

1016/24OPAQUE

1031/24OPAQUE

1061/24OPAQUE

10121/24/OPAQUE

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

24 Volt

24 Volt

24 Volt

24 Volt

Cable:

10cm

10cm

10cm

10cm

10cm

10cm

10cm

10cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Illuminance:

@1metre - 10lx

@1metre - 21lx

@1metre - 40lx

@1metre - 80lx

@1metre - 10lx

@1metre - 21lx

@1metre - 40lx

@1metre - 80lx

Current:

@13.8V 0.11Amps

@13.8V 0.17Amps

@13.8V 0.31Amps

@13.8V 0.58Amps

@28V 0.05Amps

@28V 0.07Amps

@28V 0.17Amps

@28V 0.31Amps

Fitting:

Remove bezel at each end and surface mount using two screw points, run wires through hole in mounting surface and refit bezel by clicking into place.

61

Information Correct at time of printing


Interior Lamps with Red Illuminated On/Off Switch 80mm Diameter x 14mm 3

• 79BWR12 • Interior Only

Y E A R

• 79GWR12 • Interior Only

W A R R A N T Y

• 79CWR12 • Interior Only

80mm

• 79SWR12 • Interior Only

• 79WWR12 • Interior Only 14mm

Product Description:

The 79 series interior lamp features a red night time illumination push button switch with high brightness SMD LED’s.

Part No

79BWR12

79GWR12

79CWR12

79SWR12

79WWR12

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

20cm

20cm

20cm

20cm

20cm

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Packaging:

Blister of 1

Illuminance:

@ 1 metre - 20lx

Current:

OFF @13.8Volts 0.01Amps - ON @13.8Volts 0.09Amps

Fitting:

Remove base by twisting until it is released from lamp and mount onto flat surface using three screw points. Run wires through hole in mounting surface and refit lamp by turning back into place.

Interior Lamps - 148mm x 71mm x 20mm

• 148BW12 • Interior Only

3

• 148GW12 • Interior Only

Y E A R

148mm

W A R R A N T Y

71mm

• 148WW12 • Interior Only

20mm

Product Description:

The 148 series domed low profile rectangular interior lamp has a wide 120° light spread, with 24 bright white SMD LED’s. Out put equivalent to a 15 watt globe.

Part No

148BW12

148GW12

148WW12

Voltage:

12 Volt

12 Volt

12 Volt

Cable:

20cm

20cm

20cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Illuminance:

@ 1 metre - 42lx

Current:

@13.8Volts 0.17Amps

Fitting:

Remove lens from base, surface mount with 4 fixing points using screws supplied. Run wires through fixing surface from back of lamp. Refit lens.

Information Correct at time of printing

62


NEW PRODUCT

30/11/2011

Cat 6 Side Direction Indicators 150mm x 88mm x 30mm Description: The 3102 series Category 6, side direction indicators are available in a chrome or black ABS/polycarbonate mounting bracket. They are fully sealed,water proof with tough ABS lens. Voltage: 9 Volt - 33 Volt Cable: 19cm Packaging: Box of 1 Current: @13.8Volts (0.20Amps) @28Volts (0.10Amps) C.R.N: E.C.E. 60 1 E4 - 61333 Fitting: Left or right hand mountable. Surface mount bracket onto flat surface horizontally to the ground using three screw points, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions. Warranty: 5 Years 150mm

30mm

88mm

30mm

Part No.:

3102BM

Part No.:

www.ledautolamps.com

63

Information Correct at time of printing

3102CM

P: 03 9464 5939 F: 03 9464 5940


Caravan Door Entry Lamps - 430mm x 35mm x 35mm W N EDUCT PRO

W 3 A R Y R E A A N R T Y

430mm 35mm

• 380WEL

361mm

W N EDUCT

35mm

PRO

• 380CEL

Lamps are shown in active mode

Product Description:

The 380 series door entry interior/exterior lamps are fully sealed water proof. They have 18 high brightness LED’s with the lamp inside a 90 º low profile rounded housing. These lamps are perfect for caravans, trucks or RVs or any door entry application that requires lighting.

Part No

380WEL

380CEL

Voltage:

12 Volt

12 Volt

Cable:

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Illuminance:

@ 1 metre - TBA

Current:

@13.8Volts 0.14Amps

Fitting:

Mount onto flat surface with screws, run wires through hole in fixing surface. Ensure screw plugs are fitted after fixing for a neat clean finish.

Hand Held Work Lamps - 424mm x 31mm

W 3 A R Y R E A A N R T Y

W • HH1061/12 N E UCT • Hand Held Work Lamp PROD

• HH1061/240 • Hand Held Work Lamp

W N EDUCT PRO

424mm 31mm

Product Description:

These hand held work lamps are powered by 61 high brightness SMD LED’s, encased in a protective oil resistant rubber housing with non slip handle and available with a 240 volt option or alligator clip for 12 volt applications.

Part No

HH1061/12

HH1061/240

Voltage:

12 volt only

240 volt with transformer

Cable:

3 metres of sheathed wire with alligator clips

7 metres of sheathed wire with transformer

Packaging:

Blister pack of 1

Blister pack of 1

Illuminance:

@ 1 metre - 62lx

Current:

@13.8Volts 0.31Amps

Information Correct at time of printing

64


Water Proof Colour Lamps - 58mm x 35mm x 21mm 58mm

3 Y E A R W A R R A N T Y

35mm

• 35AM • Orange

• 35YM • Yellow

• 35RM • Red

• 35BM • Blue

21mm

• 35BW

• 35BC

• 35PM • Purple

• 35GM • Green

• 35WM • White

• 35BB

Product Description:

The 35 series courtesy lamps are fully submersible, shock resistant and feature our hexagonal lens pattern. Slimline design. Individual clip in lenses for easy surface mount with no visible screws. Chrome and white brackets available separately.

Part No

35AM

35YM

35RM

35BM

35PM

35GM

35WM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Warranty:

5 years

3 years

5 years

3 years

3 years

3 years

5 years

Illuminance:

@1metre - 7.5lx

@1metre - TBAlx

@1metre - 10.4lx

@1metre - 1.3lx

@1metre - TBAlx

@1metre - 0.6lx

@1metre - 14.7lx

Current:

@13.8Volts (Blue-0.04Amps) (Green-0.04Amps) (Red-0.12Amps) (Amber-0.10Amps) (White-0.05Amps) (Yellow-0.05Amps) (Purple-0.05Amps) @28Volts (Blue-0.02Amps) (Green-0.02Amps) (Red-0.07Amps) (Amber-0.07Amps) (White-0.04Amps) (Yellow-0.04Amps) (Purple-0.04Amps)

Fitting:

Surface mount bracket with screws provided, run wires through back and clip lens into place.

Water Proof Colour Lamps - 65mm x 30mm x 24mm • 6505GM • Green

• 6505OM • Orange

3

• 6505BM • Blue

Y E A R

65mm

• 6505WM • White

• 6505YM • Yellow

W A R R A N T Y

30mm

24mm

• 6505PM • Purple

• 6505RM • Red

• 6505IM • Soft white

69mm

54mm

Product Description:

40mm

The 6505 series right angle interior or exterior step lamps feature coloured or opaque lens with 120° light spread and high brightness SMD LED’s. Protective chrome plated metal housing.

Part No

6505OM

6505YM

6505RM

6505BM

6505PM

6505GM

6505WM

6505IM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

30cm

30cm

30cm

30cm

30cm

30cm

30cm

30cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Illuminance:

@1metre-3.52lx

@1metre-4.8lx

@1metre-1.10lx

@1metre-1.37lx

@1metre-1.00lx

@1metre-1.77lx

@1metre-4.46lx

@1metre-2.6lx

Current:

@13.8Volts 0.03Amps - @28Volts 0.04Amps

Fitting:

Using screws supplied attach to surface and run wires at back through hole in mounting surface.

65

Information Correct at time of printing


Water Proof Colour Lamps - 75mm diameter x 17mm high • 75CLO • Orange

• 75CLY • Yellow

W 3 A R Y R E A A N R T Y

• 75CLR • Red

• 75CLB • Blue

75mm

• 75CLP • Purple

• 75CLG • Green

• 75CLI • White

17mm

Product Description:

The 75 series coloured interior/exterior courtesy lamps feature 4 square LED’s with coloured diffused lens for maximum light output. Supplied with chrome bezel, white, black and gold bezels available separately.

Part No

75CLO

75CLY

75CLR

75CLB

75CLP

75CLG

75CLI

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

40cm

40cm

Illuminance:

@1metre-0.91 lx

@1metre-1.55 lx

@1metre-0.25 lx

@1metre-0.09 lx

@1metre-0.38 lx

@1metre-0.82 lx

@1metre-1.43 lx

Current:

@13.8Volts 0.06Amps

Fitting:

Remove bezel and surface mount using two screw points, run wires through hole in mounting surface and refit bezel by clicking into place.

Colour Lamps - 100mm x 25mm x 10mm • 68O • Orange

W 3 A R Y R E A A N R T Y

• 68G • Green • 68B • Blue

100mm

• 68W • White

• 68Y • Yellow

25mm

• 68P • Purple

10mm

• 68R • Red

Product Description:

• 68I • Soft white

The 68 series coloured courtesy lamps are for interior use only, with high brightness SMD LED’s and a wide 120° light spread.

Part No

68O

68Y

68R

68B

68P

68G

68W

68I

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

10cm

10cm

10cm

10cm

10cm

10cm

10cm

10cm

Illuminance:

@1metre - 10lx

@1metre - 13lx

@1metre - 3lx

@1metre - 3lx

@1metre - 6lx

@1metre - 11lx

@1metre - 16lx

@1metre - 10lx

Current @13.8V:

0.11Amps

0.17Amps

0.31Amps

0.58Amps

0.05Amps

0.11Amps

0.16Amps

0.10Amps

Fitting:

Remove bezel at each end and surface mount using two screw points, run wires through hole in mounting surface and refit bezel by clicking into place.

Colour Lamps - 305mm x 15mm x 7mm

15mm

• 305A12 • Orange

W 3 A R Y R E A A N R T Y

• 305R12 • Red

7mm

W N EDUCT PRO

W N EDUCT PRO

• 305B12 • Blue

W N EDUCT

• 305G12 • Green

W N EDUCT

• 305W12 • White

W N EDUCT

305mm

PRO

PRO

PRO

Product Description:

The 305 series interior only lamps feature 15 coloured SMD LED’s with coloured lenses. They are very low profile and only 15mm in width, perfect for tight small spaces where coloured lighting is required.

Part No

305A12

305R12

305B12

305G12

305W12

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

Information Correct at time of printing

66


ECE approved

Emergency Lamps - 93mm x 36mm x 25mm

W 3 A R Y R E A A N R T Y

93mm 25mm

• 93AM

• 93RM

• 93BM

• 93GM

• 93WM

93mm

Products shown in active mode

36mm

25mm

Product Description:

The 93 series emergency lamps have 3 super bright high powered 1 watt coloured LED’s with two functions, strobe or constant. They also have extra functionality for synchronizing multiple lamps. Base is aluminium with polycarbonate lens and bezel. Fully sealed and water proof.

Part No

93AM

93RM

93BM

36mm 93GM

93WM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

19cm of hard wire

19cm of hard wire

19cm of hard wire

19cm of hard wire

Cable:

19cm of hard wire

Flash Rate:

6 flashes every 0.3 seconds

Current:

@13.8volt (Constant 0.24Amps), (Strobe 0.03-0.34Amps) - @28volt (Constant 0.07Amps), (Strobe 0.02-0.15Amps)

C.R.N

ECE Approved

Fitting:

Surface mount to flat surface with screws provided using flange and foam gasket.

W 3 A R Y R E A A N R T Y

Emergency Lamps - 121mm x 49mm x 45mm 121mm 45mm

• 50SAM

• 50SRM

• 50SBM

• 50SGM

• 50SWM

121mm

45mm

49mm

Product Description:

The 50 series emergency lamps use 4 super bright high powered LED’s with two functions, strobe or constant. Body is metal with polycarbonate lens. Fully sealed and water proof with 25cm of tinned copper wire.

Part No

50SAM

50SRM

50SBM

49mm

50SGM

50SWM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

25cm of hard wire

25cm of hard wire

25cm of hard wire

25cm of hard wire

25cm of hard wire

Packaging:

Box of 1

Box of 1

Box of 1

Box of 1

Box of 1

Flash Rate:

6 flashes every 0.3 seconds

Current:

@13.8volt (Constant 0.45Amps), (Strobe 0.03-0.26Amps) - @28volt (Constant 0.27Amps), (Strobe 0.03-0.16Amps)

Fitting:

Fix to flat surface at two fixing points.

Emergency Lamps - 72mm x 72mm x 28mm 85mm

28mm

72mm

W 3 A R Y R E A A N R T Y Product Description:

72mm

88mm

• 94AM

W N EDUCT PRO

NE

W

T

• 94RM PRODUC

• 94BM

W N EDUCT PRO

• 94WM

W N EDUCT PRO

Products shown in active mode

These lamps are fully water proof, rust proof, shock resistant, dust proof and feature incredibly bright LED illumination with clear lens and coloured LEDs. Constructed with high impact polycarbonate lens and black powder coated aluminium housing with adjustable U bracket and stainless steel bolts and fittings. Comes standard with synchronising wire and up to 18 different strobe patterns.

Part No

94AM

94BM

94RM

94WM

Voltage:

12-24 Volt

12-24 Volt

12-24 Volt

12-24 Volt

Cable:

1 Metre hard wired

1 Metre hard wired

1 Metre hard wired

1 Metre hard wired

Current (Amps):

13.8Volts - 0.38 constant 28Volts - 0.20 constant

13.8Volts - 0.50 constant 28Volts - 0.26 constant

13.8Volts - 0.38 constant 28Volts - 0.20 constant

13.8Volts - 0.50 constant 28Volts - 0.27 constant

Fitting:

Fix to mounting surface using adjustable U bracket, bolts and fittings supplied.

67

Information Correct at time of printing


SAE J85 Class 1

High Powered Mini Beacon - 64mm high x 96mm wide 3 Y E A R

W N EDUCT PRO

• MB12AM • MB12AMC SAE JU845 Class 1 12 x 1 watt LEDs 45 Flash per minute 10-110 volt

W A R R A N T Y

AL TU A CSIZE

• Intense 360º visibility • High impact polycarbonate lens • Cast alloy base/heat distribution • Fully sealed and pre wired • Shock resistant • Vibration resistant • Water Proof • SAE J85 Class 1 • ECE R65 approval • Wide voltage range 10-110v • Reverse polarity protected

ies LED log

hno ign Tec w Des Ne W N EDUCT PRO

ECE R65 approved

• MB12AME • MB12AMCE ECE R65 12 x 1 watt LEDs 120-240 Flash per minute 10-110 volt

3 Y E A R

A TU A CSIZE

W A R R A N T Y

L 64mm

96mm

Product Description:

Ultra low and compact high powered mini beacon, ideal for situations where low profile high intensity beacons are required. Intense 360 visibility with high impact polycarbonate lens with cast alloy base which acts as a heat sink. These beacons are shock resistant, vibration resistant and able to be fully submersed or high pressure washed. Reverse polarity protected with low power consumption. Easy fitting using only two fasteners supplied.

Part No

MB12AM

MB12AMC

MBAME

MBAMCE

Voltage:

10-110 volt

10-110 volt

10-110 volt

10-110 volt

Cable:

40cm of hard wire

40cm of hard wire

40cm of hard wire

40cm of hard wire

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Flash Rate:

45 flashes per minute

45 flashes per minute

120-240 flashes per minute

120-240 flashes per minute

Current:

@13.8 volt (1.00 Amps) at peak, @28 volt (1.00 Amps) at peak

CRN:

SAE J65 Class 1

ECE R65 Approved

ECE R65 Approved

Fitting:

Fit to flat surface using screws at two fixing points supplied.

SAE J65 Class 1

Information Correct at time of printing

68


Strobe Beacons - 111mm high x 64mm diameter 3 • 111RM • Fixed mount

Y E A R

• 111AM • Fixed mount

W N EDUCT

W N EDUCT

PRO

W A R R A N T Y

• 111WM • Fixed mount

58mm

W N EDUCT

PRO

111mm

PRO

64mm

Product Description:

These small and robust units are available as a strobe type with 3 high powered Generation III LED’s and 45 flashes per minute. Fixed mount.

Part No

111RM

111AM

111WM

Voltage:

10 volt - 36volt

10 volt - 36volt

10 volt - 36volt

Cable:

34cm of hard wire

34cm of hard wire

34cm of hard wire

Box of 1

Box of 1

@13.8 volt (0.13 Amps) at peak

@13.8 volt (0.13 Amps) at peak

Packaging:

Box of 1

Flash Rate:

45 flashes per minute

Current:

@13.8 volt (0.13 Amps) at peak

Fitting:

Mount to flat surface using foam gasket supplied, fitted between base and fixing surface using screws supplied.

Strobe Beacons - 130mm x 98mm x 74mm

3

• 112ABM • Fixed mount

Y E A R

• 112RBM • Fixed mount

130mm

W A R R A N T Y

98mm

Product Description:

These small and robust units are available as a strobe type with 3 high powered Generation III LED’s and 45 flashes per minute. Fixed mount.

Part No

112ABM

112RBM

Voltage:

10 volt - 110 volt

10 volt - 110 volt

Cable:

34cm of hard wire

34cm of hard wire

Packaging:

Blister of 1

Box of 1

Flash Rate:

45 flashes per minute

Current:

@13.8 volt (0.13 Amps) at peak

Fitting:

Mount to flat surface using foam gasket supplied, fitted between base and fixing surface using screws supplied.

69

Information Correct at time of printing


Strobe Beacons - 127mm x 97mm • 127AMM • Magnetic mount

• 127AMF • Fixed mount

3

• 127WMM • Magnetic mount

W N EDUCT

Y E A R

PRO

W A R R A N T Y

97mm

• 127RMF • Fixed mount

• 127BMF • Fixed mount

W N EDUCT

W N EDUCT

PRO

127mm

• 127GMF • Fixed mount

W N EDUCT

PRO

PRO

Product Description:

Mainly suited for indoor and factory/forklift use these compact and robust units are available only as a strobe with GNEII Super-LED and 60-70 triple flashes per minute. Two fixing options available, fixed mount with 40cm of hard wire (Not available for white beacon) or magnetic mount with 12 foot / 3.6 meter retractable cord ending in power source plug (only for the amber and white beacons).

Part No

127AMF

127AMM

127WMM

127RMF

127BMF

127GMF

Voltage:

12-24 volt

12-24 volt

12-24 volt

12-24 volt

12-24 volt

12-24 volt

Cable:

40cm of hard wire

12 foot/3.6mt retractable cord ending in power source plug

40cm of hard wire

40cm of hard wire

40cm of hard wire

Packaging:

Box of 1

Box of 1

Box of 1

Box of 1

Box of 1

Flash Rate:

60-70 triple plashes per minute

Current:

@13.8 volt (0.19 Amps) at peak, @28 volt (0.12 Amps) at peak

Fitting:

Run wires through hole in fixing surface or from the side of the base. Attach with screws provided, ensure foam gasket is in place between lamp and fixing surface. 127AMM/127WMM - Place onto flat metal surface and run retractable cord to power source within vehicle.

Box of 1

Strobe Beacons - 182mm high x 125mm diameter • 182RM • Fixed mount

3 Y E A R

• 182AM • Fixed mount

W N EDUCT

• 182WM • Fixed mount

W N EDUCT

PRO

ECE R65 approved

W N EDUCT

PRO

PRO

W A R R A N T Y

182mm

80mm 125mm

Product Description:

These large and robust units are available as a strobe type with 12 high powered Generation III LED’s and 120-240 flashes per minute. Fixed mount.

Part No

182RM

182AM

182WM

Voltage:

10 volt - 36 volt

10 volt - 36 volt

10 volt - 36 volt

Cable:

34cm of hard wire

34cm of hard wire

34cm of hard wire

Box of 1

Box of 1

@13.8 volt (0.26 Amps) at peak

@13.8 volt (0.13 Amps) at peak

Packaging:

Box of 1

Flash Rate:

120-240 flashes per minute

Current:

@13.8 volt (0.26 Amps) at peak

Fitting:

Mount to flat surface using foam gasket supplied, fitted between base and fixing surface using screws supplied.

Information Correct at time of printing

70


Traffic/Arrow Board Lamps - 140mm x 83mm • 83R

5

• 83A

Y E A R

140mm

W A R R A N T Y

• 83G

83mm

83A conforms to Australian Standard, AS 41952-2006

Product Description:

Powered by 48 super bright 30° LED’s with a centre brightness exceeding 700cd. One unit LED printed circuit board and housing combination with polycarbonate housing for strength and durability. The 3 bolt holes are the same dimensions as standard 4 inch arrow board shroud. The back of the lamp has provision for 4 inch “O” ring (supplied) for increased vibration resistance.

Part No

83R

83A

83G

Voltage:

12 volt only

12 volt only

12 volt only

Cable:

10cm Hard wired

10cm Hard wired

10cm Hard wired

Intensity:

Centre brightness 700cd

Centre brightness 700cd

Centre brightness 700cd

Current:

@ 13.8 volt (Red 0.42 Amps) (Amber 0.42 Amps) (Green 0.66 Amps)

Fitting:

Fit to flat surface with three screws supplied ensuring 4 inch “O” ring is positioned under base. Run wires from back of lamp.

Arrow Board Lamps - 109mm Diameter x 39mm high 5

39mm

Y E A R

• 5526A 109mm • 55062

W A R R A N T Y

53mm

109mm

25mm

Grommet

135mm

15mm

115mm

Bracket

142mm

113mm

No compliancy

Product Description:

Powered by 48 super bright 30° LED’s with a centre brightness exceeding 500cd, 2 intensities low and standard. High impact acrylic lens and ABS base for strength and durability. The lamp uses the standard 4” round grommet (53101) and brackets (53101B or 53101C) and comes with the 55062, 3 pin oval plug.

Part No

5526A

Voltage:

12 volt only

Cable:

Use Part number 55062

Packaging:

Poly bag of 1

Intensity:

Centre brightness 500cd

Current:

(Low intensity @ 12 volt 0.04 Amps) & (Standard Intensity @ 12 volt 0.43 Amps)

Fitting:

Retro fit to existing fittings, if new installation fit grommet or flange into cutout, plug wire into lamp and run through back then push into grommet/ flange.

71

Information Correct at time of printing


Daytime Running Lamps - 169mm x 60mm x 77mm

5 Y E A R W A R R A N T Y

169mm 60mm

77mm

• 7790BM

• 7790WM

Product Description:

The 7790 series are also ECE compliant for use as a daytime running lamp. They are waterproof, sea/salt spray resistant, with durable powder coated aluminium housing, and high impact acrylic lens. Powered by 9 high brightness 1 watt LED’s.

Part No

7790BM

7790WM

Voltage:

12-24 Volt

12-24 Volt

Cable:

30cm sheathed hard wired

30cm sheathed hard wired

Packaging:

Blister hang/stand pack of 1

Blister hang/stand pack of 1

Illuminance:

@ 1 metre - 520lx

Current:

@13.8Volts 0.97Amps - @28Volts 0.44Amps

C.R.N:

Approval TBA

Fitting:

Fix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied.

Daytime Running Lamps - 208mm x 74mm x 23mm

ECE approved

5 Y E A R W A R R A N T Y

208mm 23mm 208mm 23mm 74mm

• 84DTRM

W N EDUCT PRO

74mm

Product Description:

These waterproof lamps are ECE approved, with durable powder coated aluminium housing, and polycarbonate lens. Powered by 5 high brightness 1 watt LED’s.

Part No

84DTRM

Voltage:

9 - 36 Volt

Cable:

50cm sheathed with plugs and fittings

Packaging:

Boxed kit of left and right sides

Current:

@13.8Volts (1.33Amps) - @28Volts (0.64Amps)

C.R.N:

Component number 600100

Fitting:

Fit to vehicle horizontally to the ground using brackets, wiring harness and screws supplied. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

72


Yellow Light Lamps Insects and Humans see light differently. Light sources which radiate ultraviolet and blue light are more attractive to flying insects. Yellow light or incandescent yellow are difficult for insects to see therefore do not attract insects to the light source. Ideal for caravan and camping.

• 7524YC - 12 volt only

Please refer to page 58 for detailed series specifications Product Description:

The 75 series interior or exterior lamps have SMD LED’s, incredible high light output and 120° of light spread with a yellow lens for yellow ambient illumination.

• 143YILC - 12 volt only

Please refer to page 59 for detailed series specifications Product Description:

These lamps are interior only and have an ON/DOOR/OFF switch. 120 white SMD LED’s equivalent to a 50 watt globe give incredible high light output with a 120° light spread and incorporating a yellow lens for yellow ambient light.

• 7451YBM - 12-24 volt

Please refer to page 55 for detailed series specifications Product Description:

These work lamps are waterproof and sea/salt spray resistant, with durable powder coated aluminium housing, yellow coloured polycarbonate lens and ABS adjustable or removable visor. Powered by 6 high brightness 1 watt LED’s.

• 1061Y - 12 volt only

Please refer to page 60 for detailed series specifications Product Description:

These lamps are for interior use only, using white SMD LED’s with high light output and a 120° light spread and incorporating a yellow lens for yellow ambient light . Low profile design for small spaces, an unobtrusive yet stylish look.

• 380YCEL - 12 volt only • 380YCEL - 12 volt only

Please refer to page 63 for detailed series specifications Product Description:

73

The 380 series door entry lamps with yellow lens, fully sealed and water proof. They have 18 high brightness LEDs with the lamps inside a 90º low profile rounded housing. These lamps are perfect for caravans, trucks RVs or any door entry application that requires yellow ambient lighting.

Information Correct at time of printing


Reflex Reflectors - 70mm x 30mm x 6mm W 5 A R Y R E A A N R T Y

ADR/ECE approved

70mm

• 7030R • 7030RB • Red Reflex Reflector

• 7030W •30mm 7030WB • White Reflex Reflector

• 7030A • 7030AB • Amber Reflex Reflector

70mm

30mm

6mm

Product Description:

ADR compliant for both horizontal or vertical mount. Highest quality adhesive tape used for secure and lasting application.

Part No

7030R

7030RB

7030A

7030AB

7030W

7030WB

Packaging:

Blister of 2

Box of 100

Blister of 2

Box of 100

Blister of 2

Box of 100

C.R.N:

(Red 38102) (Amber 38101) (White 38103)

Fitting:

Remove tape backing and place onto flat surface, apply firm hand pressure to ensure adhesion. Please refer to ADR 13/00 for mounting instructions.

6mm

Reflex Reflectors with Mounting Bracket

ADR/ECE approved

93mm x 35mm x 7mm

W 5 A R Y R E A A N R T Y

W N EDUCT

W N EDUCT

PRO

W N EDUCT

PRO

PRO

93mm

35mm

• 7035R • 7035RB • Red Reflex Reflector

• 7035W • 7035WB • White Reflex Reflector

81mm

• 7035W • 7035WB • Amber Reflex Reflector

93mm

35mm

7mm

81mm

Product Description:

ADR compliant for both horizontal or vertical mount. Supplied in a black mounting bracket.

Part No

7035R

7035RB

7035A

7035AB

7035W

7035WB

Packaging:

Blister of 2

Box of 100

Blister of 2

Box of 100

Blister of 2

Box of 100

C.R.N:

(Red 38102) (Amber 38101) (White 38103)

Fitting:

Fit onto flat surface using screw points in bracket. Please refer to ADR 13/00 for mounting instructions.

7mm

Frame with Red Reflector - 238mm x 96mm x 6mm

Suitable for the 200 Series Double lamps • 7030R-1

W 5 A R Y R E A A N R T Y

ADR/ECE approved

238mm

96mm

6mm

Product Description:

To be used at the back of the 200/207 series double lamp assemblies (see page 25), same bolt pattern allowing a red reflector to be part of the fitted assembly.

Part No

7030R-1

Packaging:

Poly bag of 1

Warranty:

5 years

C.R.N:

(Red 38102)

Fitting:

Place frame at back of double lamp assembly lining up existing bolt pattern, ensure reflector is facing to the back of the vehicle. Please refer to ADR 13/00 for mounting instructions.

Information Correct at time of printing

74


Adjustable Flash Unit - 135mm x 38mm x 24mm

• SFU1 • Adjustable flash unit

The Safety Flash Unit is designed to assist vehicles who pull up on the side of the road and wish to draw attention to the fact that they are parked or stationary to passing vehicles. Examples of the application are in a break down situation or for a road side delivery / service vehicle. Product Description:

Two or more rear facing amber lights mounted on the vehicle at the passing driver’s eye level is a more effective method of attracting the attention of the passing driver. Hazard lights can sometimes be below the drivers eye line and are often confused as indicators or signalling a change of lane rather than the fact that you are stationary. The Safety Flash Unit reduces this problem by allowing the operator to turn on the rear facing lights in the cabin before exiting. With the unit in front of the operator, you can adjust the speed of the alternating flash rate according to your requirements. LED’s on either side of the flash rate knob indicate the flashing rate.

Part No

SFU1

Voltage:

12 or 24 volt DC capable

Packaging:

Blister of 1

Output:

2 Channels, 1 Amp which equates to 4 LED Amber lamps per channel Installation, two available options:

Fitting:

1 - Use double sided tape to attach to dashboard, supplied with unit.

2 - Open the case from the right hand side using a flat blade screw driver, and use the 2 screw positions to screw the base to the dashboard. Then replace the lid of the case.

Important installation note: It is important to consider the mounting location of the rear facing lights to keep them away from the existing indicator lights on the vehicle. To obtain the best possible attention from other drivers, mount the 2 rear facing lights on each side of the vehicle – effectively allowing as much distance between the 2 lights as possible.

AC to DC Converter

• ACDC1 • AC to DC converter

Product Description:

The ACDC1 solves a problem in the transport industry where some trucks have an output in AC only. AC voltage can damage some brands of LED lights! By simply connecting this unit to the output of the AC down converter, the ACDC1 will convert the AC signal to a rectified and regulated 12 volt DC output and supply the LED lights with an acceptable voltage source that will keep them running for years to come.

Part No

ACDC1

AC input:

12-18volts AC

DC Output:

Regulated 12 volt DC out

Output Current:

Maximum of 2 Amps DC

Packaging:

Poly bag of 1

Fitting:

Fit box to inside of cabin; 2 brown wires for AC input, 1 red wire for 12 volt positive output and 1 white wire for the output negative or ground connection. Protection with a 2 Amp fast blow M205 fuse on the input (AC) internal to the ACDC1 box.

75

Information Correct at time of printing


Pilot Lamps - 14mm x 30mm 5

• PLR12 • Red lamp

Y E A R

• PLA12 • Amber lamp

W A R R A N T Y

• PLG12 • Green lamp

• PLB12 • Blue lamp

• PLW12 • White lamp

30mm 12mm

Product Description:

14mm

Coloured pilot lamps with stainless steel nuts and housing. Perfect for console or dash indication lights, fully sealed for interior or exterior applications.

Part No

PLR12

PLA12

PLB12

PLG12

PLW12

Voltage:

12 Volt

12 Volt

12 Volt

12 Volt

12 Volt

Cable:

40cm

40cm

40cm

40cm

40cm

Packaging:

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Blister of 1

Current:

@13.8Volts (0.03Amps)

@13.8Volts (0.03Amps)

@13.8Volts (0.02Amps)

@13.8Volts (0.02Amps)

@13.8Volts (0.02Amps)

Fitting:

12mm hole required for fitting.

Load Resistors BACK OF LAMP

• LR12/2

• LR24/2

Power wire “+”

Earth wire “-”

Crimp terminals

Crimp terminals Load resistor

Must be mounted on metal surface, the resistor can reach temperatures of up to 170° Celsius You may require up to 1 resistor per function on each side.

Product Description:

Dummy load resistors designed to draw the same current as a 21 watt globe. Can be used on vehicles that have electronic components that are not LED compatible. Note; resistor can reach 170° celsius, must be mounted onto metal surface.

Part No

LR12/2

LR24/2

Voltage:

For 12 Volt system only

For 24 Volt system only

Packaging:

Blister of 2

Blister of 2

Fitting:

The Resistor should ALWAYS be wired between the input wires of the lamp, NOT the chassis of the vehicle or trailer! If fitted to the Chassis, a bad earth connection is possible, and can result in problems with the lighting system of the vehicle! Indicator Circuit: If fitting to the indicator circuit, fit one lead of the resistor to the positive supply side (Yellow wire) and the other lead of the resistor to the negative supply or ground input wire (White). Brake Circuit: If fitting to the brake circuit, fit one lead of the resistor to the positive supply side (Red Wire) and the other lead of the resistor to the negative supply or ground input wire (White) Actual Fitting: To fit the resistor, use the crimp terminals supplied. Cut the loom and re-connect the cut wires within the supplied crimp terminal with one side of the resistor crimped into that terminal. Repeat the process for the remaining wire and the other end of the resistor. Use the 2 screw down points on the resistor to secure it to a metal chassis. Important Notice: Must be mounted on metal surfaces, the resistor can reach up to 170 deg C, do not mount the resistor on any surface that can be melted by the heat of the resistor, this includes plastics, hoses or painted surfaces.

Information Correct at time of printing

76


NEW PRODUCT

21/12/2011

CATEGORY 6 SIDE DIRECTION INDICATORS 150mm x 88mm x 30mm.

Part No: 3102BM

Product Description:

Part No: 3102CM

The 3102 series Category 6, side direction indicators are available in a chrome or black ABS/polycarbonate mounting bracket. They are fully sealed,water proof with tough ABS lens.

Part No

3102BM

3102CM

Voltage:

9 Volt - 33 Volt

9 Volt - 33 Volt

Cable:

19cm

19cm

Packaging:

Box of 1

Box of 1

Warranty:

5 Year

5 Year

LED Qty:

11

11

Lens Type:

ABS

ABS

Base:

ABS/Polycarbonate

Current:

@13.8v (0.20Amp)

E.C.E:

ECE 60 1 E4

C.R.N:

61333

ABS/Polycarbonate - @28v ( 0.10Amp) 150mm

30mm

Box Qty:

50

50

Barcode:

9335962009435

9335962010059

Fitting:

150mm horizontally to the ground using three screw 30mmpoints, run wires through back and Left or right hand mountable. Surface mount bracket onto flat surface clip lens into place. Please refer to ADR 13/00 for mounting instructions.

88mm

88mm

150mm

30mm

88mm

30mm

30mm

77

Information Correct at time of printing


NEW PRODUCT

21/12/2011

10V-30V input voltage High intensity 3W SMD LEDs 100% Water & dust proof IP67 3 year warranty

Shining in the spotlight...

LED Technologies has a brand new edition to its powerful worklamp range. Introducing the all new 84mm round lamp with an aluminium cast casing and polycarbonate lens, this tough lamp is suitable for any heavy duty application. The lamp is IP67 rated and features 4 powerful 3 watt LEDs combined with a complex shape chrome reflector to provide the ultimate in lighting performance. Available in both black and white finishes, with a stainless steel bracket, this compact high performance lamp will suit any extreme application. Description:

Compact high powered work lamp.

Voltage:

10V-30V

Cable:

50cm hard wired

Packaging:

Single blister hang pack

Current:

@13.8Volts (0.68Amps) @28Volts (0.36Amps)

Warranty:

3 Years Part No.:

84mm

84mm

65mm

LWL8312WM

65mm

111mm

111mm

-5000mm

2000mm

Part No.: 7000mm

12000mm

LWL8312BM 17000mm

22000mm

0

5000mm

Information Correct at time of printing

78


NEW PRODUCT

30/3/2012

12V-24V input voltage 100% Water & dust proof 4 Bright SMD LEDs 5 year warranty

Number plates are clearly seen...

LED Technologies have just released a brand new Licence Plate Lamp into their range. Featuring a tough polycarbonate lens with an ABS base for extra durability and four super bright SMD LEDs, this lamp will surely impress. They come standard in 12-24 volt with 23cm of hard wired cable and are backed by a 5 year warranty. One lamp on the long edge of a licence plate is required for ADR compliance (with ECE approval) which make them a very economical alternative. The 40 series licence plate lamps are perfect for any vehicle or trailer application where licence illumination is required.

45mm

Description:

Voltage:

Licence plate lamp with black housing. ECE approved E9 L00 1248. 12V-24V

72mm

Packaging:

Bulk box of 1

Current:

@13.8V (0.07Amps) @28V (0.05Amps)

Warranty:

5 Years

79

50mm

Part No.: 40BLMB List Price: $9.90+gst

Information Correct at time of printing

41mm


Information Correct at time of printing

80


PROMOTIONAL PRODUCTS * We have a range of posters available for distributors and resellers. These are normally released to coincide with our advertising schedule.

*Subject to availability. Colours and styles may vary. 81

Information Correct at time of printing


PROMOTIONAL PRODUCTS * We have a range of marketing material, internal signs and product catalogues available for distributors and resellers.

LED Technologies Designers and Manufacturers

Product Catalogue No 5 Automotive Marine Industrial

Excellence in Lighting Solutions

Products made in Australia and Taiwan

Catalogues, Brochures and Flyers

Corflute Signs

Hats, Stubby Holders and Pens

*Subject to availability. Colours and styles may vary.

Information Correct at time of printing

82


LED STORE MERCHANDISERS Perfect for resellers who display stock in store and service retail clients.

R-1 Small Merchandiser Qty

Part #

Qty

2

58ARM

2

1031

2

58AM

2

1061

2

58RM

2

7524W

2

58WM

2

150BAR2

2

30BLM

2

100BAR2

2

200BSTIM

2

207BARLP2

2

1016

1

DB2 (optional)

Part #

*Steel racking not supplied

R-2 Small Merchandiser

Qty

Part #

Qty

Part #

2

58ARM

2

1016

2

58AM

2

1031

2

58RM

2

1061

2

58WM

2

150BAR2

2

30BLM

2

100BAR2

2

200BSTIM

2

207BARLP2

2

7524C

1

DB2 (optional)

*Steel racking not supplied

83

Information Correct at time of printing


LED STORE MERCHANDISERS Perfect for resellers who display stock in store and service retail clients.

Generation One Series Merchandiser Qty

Part #

Qty

Part #

2

35ARM

2

80BARWM

2

35AM

2

100BSTIM

2

35RM

2

100BARRM

2

35WM

2

100BARWM

2

35BLM

2

125BARRM

2

80BSTIM

2

125BARWM

2

80AM

2

235R

2

80RM

2

235A

2

80WM

2

235W

2

80BARM

4

LR12

2

80BARRM

4

LR24

*Steel racking not supplied

Generation Two Series Merchandiser QTY

Part #

QTY

Part #

2

58ARM

2

200BARLP2

2

58AM

2

8MCABLE

2

58RM

2

LP1

2

58WM

2

5C81

2

35BLM

2

5C41

2

100ARM

2

4C110C

2

100BAR2

2

4C150C

2

150ARM

2

4C210C

2

150BAR2

2

5C430C

2

275ARM

2

5C490C

2

275BAR2

2

5C670C

2

207BARLP2

*Steel racking not supplied

Information Correct at time of printing

84


LED STORE MERCHANDISERS Perfect for resellers who display stock in store and service retail clients.

200 Series Merchandiser QTY Part #

QTY Part #

4

35ARM

2

200BRRM

2

35AM

2

200BARRM

2

35RM

2

200BARWM

2

35WM

2

200BAAAM

2

35BLM

2

200BRRRM

2

200BSTIM

2

J9BARRM

2

200BAM

2

J9BARWM

2

200BWM

6

7030A

2

200BRM

6

7030R

2

200BARM

6

7030W

2

200BRWM

2

LR12/2

2

200BAAM

*Steel racking not supplied

Truck Series Merchandiser QTY

Part #

QTY

Part #

2

110AM

2

125BARRM

2

110RM

2

125BARWM

2

110WM

4

LR12

2

130AM

4

LR24

2

130RM

6

7030A

2

130WM

6

7030R

2

100RM

6

7030W

2

100WM

4

59401C

2

100AM

4

53101C

2

100BARWM

4

59401B

2

100BARRM

4

53101B

2

125AM

4

53102

2

125RM

4

59401

2

125WM

4

53101

*Steel racking not supplied

85

Information Correct at time of printing


LED STORE MERCHANDISERS Perfect for resellers who display stock in store and service retail clients.

Truck/Trailer Merchandiser

Qty

Part #

Qty

Part #

2

58ARM

2

200BARLPM2

2

58AM

2

80BARM

2

58RM

2

80BARRM

2

58WM

2

100BARRM

2

35BLM

2

100BARWM

2

35CLM

2

125BARRM

2

38AM

2

235R

2

38RM

2

235A

2

38WM

2

235W

2

38ARM

4

LR12

2

38ARMBKT

4

LR24

2

100ARM

2

7030A

2

150ARM

2

7030R

2

275ARM

2

7030W

*Steel racking not supplied

Caravan & Trailer Series Merchandiser

Qty

Part #

Qty

Part #

2

35ARM

2

200RM

2

35RM

2

200BARM

2

35WM

2

110AM

2

35AM

2

110RM

2

58ARM

4

53101H

2

58RM

2

143120W12

2

58WM

2

1016

2

58AM

2

1031

2

35BLM

2

1061

2

35CLM

2

7524W

2

38AM

2

79WWR12

2

38RM

2

7030A

2

38WM

2

7030R

2

38ARM

2

7030W

2

80BARRM

2

LP1

2

100BARRM

*Steel racking not supplied

Information Correct at time of printing

86


LED STORE MERCHANDISERS Perfect for resellers who display stock in store and service retail clients.

Truck/Trailer and Accessories Merchandiser

Qty

Part #

Qty

Part #

Part #

4

58AM

2

80BARWM

2

75R12

6

58ARM

2

100BARRM

2

75B12

4

58RM

2

100BARWM

2

75Y12

4

58WM

2

125BARRM

2

1016

4

38AM

2

125BARWM

2

1061

4

38ARM

2

J9BARRM

2

1031

4

38RM

2

110AM

2

10121

2

38ARMBKTR

2

110RM

2

7524W

2

38ARMBKT

2

110WM

2

7525C

4

38WM

2

130AM

2

143120W

4

35BLM

2

130RM

2

148BW12

4

30BLM

2

130WM

2

148WW12

4

150ARM

6

59401H

2

52WG

4

100ARM

6

59401C

2

52WR

4

275ARM

6

53101H

4

LR12

2

207BARLP2

6

53101C

4

LR24

2

80BARM

12

53102H

2

80BARRM

2

75O12

*Steel racking not supplied

87

Qty

Information Correct at time of printing


LED STORE MERCHANDISERS Perfect for resellers who display stock in store and service retail clients.

Expo 1 Merchandiser Qty

Part #

Qty

Part #

Qty

Part #

2

100BAR2

2

35BLM

2

68Y

2

135ARM

2

35RM

2

7030A

2

150BAR2

2

35WM

2

7030R

2

200BSTIM

2

52WG

2

7030W

2

200CSTIM

2

52WR

2

80BARM

2

207BARLP2

2

68B

2

80BARRM

2

235A12

2

68G

2

80BARWM

2

235R12

2

68I

2

80BSTIM

2

235W12

2

68O

2

LR12

2

30CLM

2

68P

2

LR24

2

35AM

2

68R

2

TK5

2

35ARM

2

68W

*Steel racking not supplied

Qty

Expo 2 Merchandiser

Part #

Qty

Part #

2

100BAR2

2

68B

2

150BAR2

2

68G

2

200BSTIM

2

68I

2

207BARLP2

2

68O

2

235A12

2

68P

2

235R12

2

68R

2

80BARM

2

68W

2

80BARRM

2

68Y

2

80BARWM

2

1031

2

80BSTIM

2

1061

2

35BLM

2

10121

2

58AM

2

1016OPAQUE

2

58ARM

2

1031OPAQUE

2

58RM

2

148BW12

2

58WM

2

148WW12

2

4C110C

2

7524C

2

4C150C

2

7524W

2

4C190C

2

7524WB

2

5C41

2

7524WR

2

5C490C

2

79BWR12

2

5C610C

2

79GWR12

2

5C81

2

79SWR12

2

6505BM

2

LP1

2

6505GM

2

LR12

2

6505IM

2

LR24

2

6505OM

2

TK5

2

6505PM

2

7030A

2

6505RM

2

7030R

2

6505WM

2

7030W

2

6505YM

*Steel racking not supplied Information Correct at time of printing

88


LED STORE MERCHANDISERS Perfect for resellers who display stock in store and service retail clients.

Expo 3 Merchandiser

Qty

Part #

Qty

Part #

Qty

Part #

Part #

2

100ARM

2

80RM

2

5C81

2

7524C

2

100BAR2

2

80WM

2

6505BM

2

7524W

2

100BSTIM

2

30BLM

2

6505GM

2

7524WB

2

135AM

2

35BLM

2

6505IM

2

7524WR

2

135ARM

2

38AM

2

6505OM

2

1016

2

135RM

2

38ARM

2

6505PM

2

1031

2

135WM

2

38ARMBKT

2

6505RM

2

1061

2

150ARM

2

38RM

2

6505WM

2

10121

2

150BAR2

2

38WM

2

6505YM

2

1016OPAQUE

2

200BARM

2

52WG

2

68B

2

1031OPAQUE

2

200BSTIM

2

52WR

2

68G

2

148BW12

2

207BARLP2

2

58AM

2

68I

2

148WW12

2

235A12

2

58ARM

2

68O

2

79BWR12

2

235R12

2

58RM

2

68P

2

79GWR12

2

235W12

2

58WM

2

68R

2

79SWR12

2

275ARM

2

4C150C

2

68W

2

LP1

2

275BAR2

2

4C190C

2

68Y

2

LR12

2

80AM

2

4C210C

2

7030A

2

LR24

2

80BARM

2

5C41

2

7030R

2

TK5

2

80BARRM

2

5C490C

2

7030W

2

80BARWM

2

5C610C

2

7450B12

2

80BSTIM

2

5C730C

2

7450W12

*Steel racking not supplied

89

Qty

Information Correct at time of printing


DISPLAY BOARDS Light up display board featuring our most popular lamps. Let your customers see how good our lamps look. DB1

DB2

DB3

DB4

Displays in Active Mode Product Description:

LED mini display board, self standing or fix to wall with 3M mounting tape supplied. Operating in a 5 second chasing sequence.

Part No, Packaging

DB1 - Box of 1

DB2 - Box of 1

DB3 - Box of 1

DB4 - Box of 1

Voltage:

240 volt with transformer

240 volt with transformer

240 volt with transformer

240 volt with transformer

Included Accessories:

240 volt transformer & 3M double sided mounting tape

Display Contains:

80BAR, 35AM, 35RM, 35WM, 7524C, 35BLM

7524WR, 7524W, 68R, 68W, 6505RM, 6505WM, 52WG, 52WW, 52WR

1031OPAQUE, 68O, 68P, 68Y, 68B, 68R, 68G, 1031

150BAR, 58AM, 58RM, 58WM, 1016/ OPAQUE, 1031, 30BLM x 2

282mm

Dimensions:

282mm x 201mm x 38mm

282mm x 201mm x 38mm

282mm x 201mm x 38mm

282mm x 201mm x 38mm

Warranty

5 years

5 years

5 years

5 years

Box Qty:

5

5

5

5

201mm

282mm

201mm

38mm 16mm

38mm 16mm

Information Correct at time of printing

90


Warranty/Return for Credit Claim Form 1. 2. 3. 4.

Generation II products have a lifetime warranty. We consider 20 years to be the lifetime of a trailer. Automotive products have a 5 year warranty, MaXilamp series have a 7 year warranty. Interior and courtesy lamps have a 3 year warranty Commercial lighting lamps have a 2 year warranty

This warranty covers faults in components and workmanship of the lamp itself when used under normal conditions and does not cover: • Faulty Installation • Over Voltage • Accidental Damage • Excessive Heat Damage • Misuse or Abuse • Freight Charges • Cost of labour for removal and replacement of product WARRANTY PROCEDURE All warranty returns must be tested off the vehicle to ensure that the unit is at fault. This can be done by simply attaching the lamps to a fully charged 12 volt battery. Do not replace any products to your customers unless you are 100% sure that the product is faulty and will be covered under warranty. If the unit is faulty, return it to your place of purchase so it can be directed to the LED Technologies warranty department for full testing and evaluating. Note: Most of our rear lamp assemblies are designed so that if one insert is damaged it can be replaced easily without replacing the complete light assembly; only return the faulty insert and not the entire assembly. RETURN FOR CREDIT Any product that is returned for a credit and not as a warranty claim, must be in original clean resaleable condition. The packaging must not be opened, sun damaged, UV faded or tampered with. Warranty Claims and Return for Credit can be returned to us at. LED Technologies Pty. Ltd. 12 Brand Drive Thomastown Victoria 3074 Attention: Warranty Department Name:____________________________________________________________________________________________ Address:__________________________________________________________________________________________ Phone:_______________________________________________Email:________________________________________ Date of Purchase:____________________________ Place of Purchase:________________________________________ Part Number/s:_____________________________________________________________________________________ Description of fault/Reason for return:___________________________________________________________________ _________________________________________________________________________________________________ _________________________________________________________________________________________________ _________________________________________________________________________________________________ _________________________________________________________________________________________________ Vehicle fitted to:____________________________ Voltage of Vehicle:________________________________________

Lamp has been tested off the vehicle or trailer, please tick (only for warranty claims). Please photocopy this form for warranty claims

91

Information Correct at time of printing


Exciting NEW PRODUCTS FOR 2011 42 Series Marker Lamps Page 45

36 Series Marker Lamps Page 44

42 Series Marker Lamps Page 51

42 Series Marker Lamps Page 48

7035 Reflex Reflectors Page 73 150 Series with Licence Plate Lamp Page 15 100 Series with Licence Plate Lamp Page 15

151 Series Lamps Page 14 101 Series Lamps Page 14

235 Series with Twin Bracket Page 28

380 Series with Single Bracket Page 35

275 Series Combination Lamps Page 18 380 Series with Twin Bracket Page 28

250 Series Combination Lamps Page 18

J3 Twin Combination Page 20 J3 Single Page 20

J3 Triple Combination Page 20 80 Series Triples with Mounting Bracket Page 22

102 Series Stop/Tail/Indicator/Reverse Page 38

131 Series Rectangular Lamps Page 36

143 Series Marine Interior Lamps Page 53 380EL Series Caravan Door Entry Lamps Page 63

305 Series Coloured Interior Lamps Page 65

72 Series Work Lamps Page 56

Information Correct at time of printing

92


LED Technologies P: 03 9464 5939 F: 03 9464 5940 E: led@ledtech.com.au www.ledautolamps.com


LED Autolamps Catalogue 5