Page 1

D o c k s

D oors + Loading D ock Produc ts Handbook

Australia’s largest range | Total dock package | Design a solution


The Leda Advantage

About Us Leda is the market leader in the design and manufacture of physical security and access control products. Leda maintains an absolute commitment to quality and has developed special manufacturing methods and equipment to ensure a consistently high quality standard for all its products. The Leda Advantage • Innovative products • Stylish contemporary designs • High vandal resistance • Reliable and low maintenance • Cost efficient • Superior installation methods •U  nparalleled technical advice with product choice and specification Quality As part of its policy of ongoing improvement, Leda works continually to advance the effectiveness and efficiency of all its products. When selecting or specifying from within this handbook, it is advisable to consult directly with Leda to ensure that specifications have not been altered. Leda can also advise on the suitability of your dock or door selection for the proposed application.

Product specifications displayed in this handbook are accurate at time of printing. Improvements and additions are continually being made to the product range. Check with your nearest Leda Sales office that the designs and specifications displayed are still current. Comprehensive brochures and technical literature on the complete range of Leda’s architectural and security products are available on request or visit the website: www.ledasecurity.com.au

Service Every Leda client is guaranteed unrivalled service,advice and technical support. Products are distributed and supported through branch offices or distributors throughout Australia and New Zealand. Warranty All Leda products carry a full comprehensive 12 month warranty. Optional warranty extensions are also available if and when Preventative Maintenance Contracts (PMC) are entered into. Materials and Finishes Most Leda products are available in a pre-primed painted finish or galvanised mild steel. Leda utilises its own robotic cutting / welding and powder -coating equipment to ensure a consistent, high quality finish to all of its products.

Copyright © Leda Security Products Pty Ltd 2011. All rights reserved. No part of this work may be produced or utilised in any form or by any means, electronic or mechanical, including photocopying, recording or in any information storage or retrieval system, without the prior written permission of Leda Security Products Pty Ltd.


General > Contents

Large Doors

Flash CS

71

Fabric Doors

8

Wash down

73

Sliding Steel Doors

13

Traffic C

75

Folding Steel Doors

14

Traffic CM

77

Energy

79

Panel Lift Doors Introduction

15

PVC Doors

Sectional Doors

19

Flexible Flap door

81

Manual LS

21

Flexible Strip door

83

Togle Switch LSD

22

Safety and control systems

85

Motorised Auto LSA

23

Lifting Types

24

Door Blade Composition

25

DockBrain

86

NL - Normal Lifting

26

DockBrain Eyes

90

HL - High Lifting

28

Dock Introduction

92

VL - Vertical Lifting

30

Automatic Dock Leveller

95

RLO / RLB - Reduced Lifting

32

Manual Dock Leveller

98

IL - Inclined Lifting

34

Dock Drawbridge

99

HLIL - High Inclined Lifting

36

Drawbridge Frame

100

Fitting With Pipe Spacer

38

Options & Accessories

101

Curtain Weights Table (Kg)

39

Dock Seals

103

Glazed Doors

41

Dock Barriers

106

Panel Details

44

Dock Ramp

107

Panel Door Portals

45

Dock Structures

108

Door Motors

48

Dock Shelters

109

Door Maintenance

54

Accessories

55

High Speed Doors

Docks

Materials Handling

62

Scissor Lift - Standard

110

Sector Reset

63

Scissor Lift - Shallow

111

Smart Reset

64

Scissor Lift - Accessories

112

Sector plus

67

Freight Hoists

113

Smart plus

69 The Leda Advantage Contact Us

114


I ntro > Leaders in Perimeter Securit y &1300 780 450

As Australia’s leading specialist in loading docks and doors, Leda can offer a complete range of integrated dock solutions – comprising industrial and high speed doors, dock levellers, seals, igloo's. For the complete range of Securapost bollards refer to Leda’s Architectural & Security Bollards Handbook. Leda offers: • Holistic solutions • Standard product range • Standards compliance • Quick turnaround • Local production and parts support • Minimal downtime Designing material handling solutions requires an holistic approach. This is the fundamental undertaking by Leda Security in recommendations to clients, consulting organisations and business partners.

4


Intro > Engineering

I n t r o

&1300 780 450 One of Leda’s strengths is its vast engineering experience in designing site-specific solutions, making it the ‘go to’ manufacturer for complex or difficult projects.

Intro 4 Large Doors 8

From the initial site survey and audit, Leda will provide the necessary technical information and options to

Panel Lift

15

High Speed

62

PVC 81

misunderstanding of the project’s extent of work. Installation A Leda project manager will be appointed in advance of the installation to plan and supervise stages of production and ensure a smooth, professional install and commissioning of the equipment.

DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge

99

Seals 103

Barriers 106 Service and maintenance Leda technicians will make recommendations on the Ramp 107 required service and maintenance program required for your equipment based on expected usage. An agreed Structures 108 Preventative Maintenance Contract (PMC) will then Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

allow clients to make an informed decision. Design If required, Leda can provide detailed renderings to show how the installation will look upon completion – a useful service, and one to take advantage of when a committee or management board need to make the decision. Production Prior to manufacture, a full set of working drawings will be submitted for approval eliminating any

be implemented to ensure the equipment provides a maximum service life. Warranty A comprehensive 12 months’ warranty (parts and equipment) commences from date of supply (or commissioning if Leda installs). This will be extended to 24 months provided Leda’s recommended PMC is

5


Intro > Specification to Commissioning &1300 780 450 In selecting Leda, you are selecting an Australian owned company that manufactures its products in Australia under strict OH&S and quality controlled programs. Leda’s strengths lie in its ability to offer comprehensive solutions through an extensive support structure comprising local sales teams and experienced engineering and design staff backed by modern manufacturing facilities and unparalleled installation and maintenance support. You will be provided with: • A check list to assure you select the appropriate accessories and consider the operational performance you will require of your dock or door. • Comprehensive working drawings allowing your staff to sign-off on before commencement of production. • Structurally designed footing details. • An operations manual including specifications, drawings, spare parts list and recommended servicing information.

Double your warranty period After successful commissioning of your equipment, and normally within a month, you’ll receive an after-sales service letter containing information on suggested servicing of your equipment and details of various Preventative Maintenance Programs available. If you elect to adopt one of these Programs Leda will double your warranty period from 12 months to 24 months.

6

Specification At the early stages of any project, Leda can provide advice and engineering documentation, including written specifications for product, and CAD drawings for site plans.

Section A-A 300 Steel reinforcement as scheduled Footing beam 1000 300

Footing Plan View 400

300 Gate

Service Service is a critical component to the long-term operation of all Leda equipment. Preventative maintenance programs are available to ensure all products continue to perform reliably and efficiently and it is highly recommended that a service and maintenance agreement be taken out for all automated or mechanically moving products.

Installation The construction industry is learning the benefit of suppliers able to project manage as it is more critical than price. Incompetent sub contractors will end up requiring more management which wipes out any perceived price advantage. Having Leda install ensures that there are no excuses for poor commissioning.


Intro > Specification to Commissioning

I n t r o

&1300 780 450 Intro 4 Large Doors 8

Design Ongoing research and development provides the products and technical advice needed for real perimeter security solutions. Products are 3D modelled, and drawn for installation when required. Shop drawings are submitted for approval prior to manufacturing. Engineering staff includes both mechanical and electrical with close support from civil engineering sub-contractors.

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge

99

Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109

Testing Leda undertakes ongoing impact testing programs to confirm design and engineering specifications. From the test data, computer-modelling of the expected wind ratings can be carried out for both product and footing designs.

Scissor Lift 110 Freight Hoists 113 Code Index Engineering Leda not only engineers the doors, but has developed a number of lifting options that are designed to significantly reduce installation times and costs. This technology has been developed by Leda’s engineers and further demonstrates Leda’s reputation as the industry leader.

Manufacturing Leda’s modern 6000m2 manufacturing facility is located at Tuggerah NSW (90km north of Sydney). Leda’s internal manufacturing processes use MRP (Manufacturing Resource Planning) which also enables an effective QA system. To gain a deeper understanding of Leda’s manufacturing capabilities, prearranged tours of the facility are welcome.

7


Product Range > Doors Fabric Doors

Mining Shipping Aviation

Max. Width 60m Max. Height 40m Opening Speed 140-160mm/sec Closing Speed 140-160mm/sec Duty Cycle (per day) 50 Operating Temp -10 to 70 C Power 3 phase Materials PVC fabric

(For larger span doors, movable mullions are installed)

Leda industrial doors are designed & manufactured to suit a variety of applications & weather conditions for any large building opening. Our doors are specifically designed by our skilled experienced engineers which allows Leda to tailor solutions for any requirement. Utilising either steel aluminium frames for various working conditions extra wind loading requirements, we can design a solution to fit most demanding locations. From medium to extreme sizes we can design & manufacture doors up to 60m wide & heights up to 40m. All gearbox & motor systems are designed maximum efficiency.

Your Logo Here

& or & the

for

Engagement Our recommended staged approach to large door projects is: 1. C  lient to provide specifications & wind loading for the area to which the doors will be installed. Make sure you differentiate wind loadings when the doors are closed or in motion. 2. L eda will provide basic door information such as how the doors are typically mounted or similar drawings. They are not site specific at this early stage. 3. Leda will provide a door quote including engineering costs. We trust that around this point a preferred supplier can be identified as all costs are now known. Once Leda has the wind loadings, location & door sizes we typically quote in 5-7 days. 4. If your due diligence in relation to Leda & the door are satisfied, Leda should be engaged to assist with final door designs to meet site specific building requirements including structural certificate agreement of the door which is crucial to do before the project starts. The structural engineering is billable work but no commitment beyond engineering costs is required. 5. Final door & installation costs submitted if any changes. 6. Awarding of contract. 8


1300 780 450

Docks

Product Range > Doors Fabric Doors

Mining Shipping Aviation

Intro 4 Large Doors 8

Lead Times Guide While Leda will provide a complete project timeline with our quote, some timing guidelines are below: 1. Quotation 5-7 days 2. E  ngineering can be from 5 days to 5 weeks & a hard task to pin down as lots of changes, people & sign offs required. 3. F rom drawing sign off to goods ready for shipment (overseas) is approx. 6-10 weeks, again dependant on size & quanitity. 4. S hipment time we allow 6 weeks & add 2 more weeks for customs & road shipment to site. 5. Installation  for small doors is typically 2 - 5 days & large doors up to 7 - 14 days each. Doors under 12m can be shipped largely assmebled so faster to install.

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109

Drawing 1 - Front View

Side Rail & Top Sections The side guide rails & bottom sections are manufactured using reinforced steel. The rail system is made from aluminium or steel depending on individual site requirements. Each section is a maximum of 2m to enable rapid & easy repair or replacement in the event of impact damage. Cable breakage systems are installed at each end of the bottom section to prevent the door closing in the event of cable failure. The steel lifting wires are also connected to cable breakage system.

Scissor Lift 110 Freight Hoists 113 Code Index

Fabric The door is made of two layers of heavy duty special 900 gram vinyl-coated polyester fabric, seperated by aluminium or steel intermediate sections. Vision panels can be built into the doors to allow light penetration when the doors are closed. Seals Side rail rubber seals & our custom designed rubber bottom seal provide a weather & vermin resistant seal when the door is closed.

Drawing 2 - Side View *Note: Height requirements of approx. 1500mm above clear opening height.

9


Product Range > Doors Fabric Doors

Mining Shipping Aviation

Installation While all doors must go through an individual design review, these renders show typical detail of how the door attaches to the building.

Building Frame Shown as Galvanised Door Shown in Yellow

Doors are typically attached to existing building columns via PFC brackets. These are normally welded & bolted between existing columns & door channel.

Front View

10

Attachment Detail


1300 780 450

Product Range > Doors Fabric Doors

Mining Shipping Aviation

Wind Ratings See AS/NZS 1170.2:2011 for wind information for your intended site location. Fabric doors can be designed for cyclone areas which are referred to as “Wind Region D� in the standard. Most major cities are in A regions. As part of the structural engineering review, other variables in addition to region to be considered inclulde: Wind Direction Surrounding Terrain Shape of Building Positive & Negative Pressure Structural Height Wind Borne Debris That is why the structural engineering review is conducted at the start of the process so structural engineering certification is provided. Consideration should also be given for wind loadings when the door is closed, in motion, or open. How it works The doors consist of either two sheets of PVC coated polyester fabric with intermediate, horizontal steel or aluminium sections, fitted between the fabrics. These intermediate sections transfer the wind load to vertical guide rails which also supply extra wind resistance. The door leaf is opened by the bottom section being lifted by steel wires which are wound up on drums, driven by the automated drive system. The sections above are stacked on top of one another & the fabric folds into pleats on the sides.

Docks

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

Construction The door leaf is made of two layers of heavy duty special 900 gram vinyl-coated polyester fabric, seperated by aluminium or steel intermediate sections. The intermediate top section is bolted to the header box with steel wire. The fabric is attached to both sides of the intermediate sections for added strength. Operation System The system can be controlled by a completely automated system or a simple pushbutton. The control box has an up & down button & an emergency stop button. The door automation can be integrated with remote controls, radar, induction loops, sirens or traffic lights Maintenance The Leda Fabric Doors are low maintenance requiring a recommended annual inspection process to check the steel cable & running rails for any signs of wear & tear.

11


Product Range > Doors Fabric Doors

Mining Shipping Aviation

PVC Technical Data Type of Coating Finish Flame Retardancy Total Weight Tensile Strength Tear Strength Adhesion Cold Resistance Heat Resistance Light Fastness Crack Resistance Base Fabric Material Yarn Count Weave

PVC Both sides lacquered, high gloss DIN 75200, ISO 3795 <100mm/min 900 g/m2 4300 warp / 4000 weft (N/50mm) 500 warp / 500 weft (N) 20 N/cm -30 deg C +70 deg C >6 no cracks <100000x PES 1100 dtex P 2/2

Standard Colour Swatch

12


1300 780 450

Docks

Product Range > Doors Large Steel Doors

Large span doors for: Aviation, Shipping, Defence

Intro 4 Large Doors 8

Quad or Bi-Folding Product Code : LVBF

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86

Sizing

Dock Intro 92

Doors 20 x 20 metres have been installed & larger sizes can be considered.

Leveller 95

Door Mounting

Drawbridge 99

The nature of Quad or Bi-Folding doors is that the counterweight system means it is not top heavy; making it a very stable door. Doors can be designed with a self supporting frame or as part of a new building.

Seals 103 Barriers 106 Ramp 107

Townsville QLD

Wind Loadings Can be cyclone rated

Structures 108 Shelters 109 Scissor Lift 110

A critical question for all doors is the wind loading classification for the doors intended location. Leda can work with you in providing an entire solution including third party structural certification to AS1170.2 (2011)

Freight Hoists 113 Code Index

La Trobe Valley VIC

Existing column in blue (example)

Typical side detail Door upright profile in green (bolted to building column)

Typical plan detail of side support post

13


Product Range > Doors Large Steel Doors

Large span doors for: Aviation, Shipping, Defence

Tri or Bi-Sliding Product Code : LVBF Can be cyclone rated Door Mounting The advantage of Tri or Bi-Slilding doors is that the weight of the door is transfered directly to ground. This removes the need for heavy structures to suspend the doors. Doors can be designed completely independant of building or integrated inside the stucture. Wind Loadings A critical question for all doors is the wind loading classification for the doors intended location. Leda can work with you in providing an entire solution including third party structural certification

Automation Leda are able to automate large doors also and have retrofitted automation to older doors on occasion

14


1300 780 450

Docks

Product Range > Doors Panel Lift Doors

Best use of transit openings. Weather resistant. Maximum safety.

Leda overhead doors

Leda automatic overhead doors The ideal solution for all industrial needs Leda overhead doors offer a range of real and amazing advantages. Their compact size leaves more available space both inside and outside the premises Leda sectional overhead door side runners move vertically along the wall and parallely to the ceiling, ensuring optimal use of the available internal space. DITEC automatic overhead doors Furthermore, their installation above the opening fully exploits the transit opening. The ideal solution for all industrial needs

Panel Lift

15

High Speed

62

DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106

For transit openings up to 8 m wide

Ramp 107

Their heat insulation ensured by Their compact size leaves more available spaceand both soundproofing, Minimum space required on the lintel - 200 mm insulated improves internal living conditions and inside and outside thepanels, premises Distinctive features of models offered DITEC sectional overhead door side runners move vertically energy consumption.

Structures 108 Shelters 109 Scissor Lift 110

or air grilles.

DITEC overhead door panels are 40 mm thick and are

More environmental control

Large Doors 8

PVC 81

Easy and practical to open and operate Best use of transit openings. Weather resistant. Maximum safety. Their compact size ensures more available space both inside and outside the premises. They are also practical and easy to use. DITEC overhead doors offer a range of real Technical features of the product range. and amazing advantages. More environmental control

along the wall and parallely to the ceiling, ensuring optimal use DITEC overhead door panels are sturdy and ensure a high of the available internal space. Furthermore, their installation pleasing Light and aesthetically heat insulationenvironments and soundproofing. above the opening fully exploits the transit opening. The galvanised material used and the sandwich-type frame The panels can also be manufactured with effectively protect it from the elements. Easy andadditionof practical to open and operate the practical portholes or full aluminium sections Their compact size ensures more available space both inside The core insulated with high-density (48 kg/m3), CFC-free featuring unbreakable glass and outside the premises.polycarbonate They are also practical and easy to orpolyurethane foam offers high protection from outsidepanels, wire meshing use, especially with original DITEC motors. temperatures. They add value to the premises and meet all requirements

Intro 4

The and different offered the door to be aesthetically pleasing and available in two heights - 500 mm and ensure 610 mm. Their heatdesign insulation and soundproofing, ensured by insulated solutions panels, improves internalsuited living conditionsin and any energy architectural The doors are available environment with streaked effect horizontal louvre perfectly - from modern and traditional industrial consumption. motif, cassette and Flat (upon payment of a surcharge). buildings to fine commercial buildings. The doors can meet any industrial and commercial Light and aesthetically pleasing environments requirement and add value to the building they are installed on. Leda doors are built to ensure The panels can also be manufactured with the addition One of the smallest heat the highest ease and of practical portholes or full aluminium sections featuringflexibility of use which, in turn, ensures a quick, hassle free and accurate polycarbonate or unbreakable glass panels, wire meshing or replacement of old doors. insulation coefficient!

Freight Hoists 113 Code Index

air grilles.

Technical features of the product range. Thermal transmittance according to standards They add value to the premises and meet all requirements UNI EN 13241 appendix B, UNI EN space 12428, For transit openings up to 8 m wideMinimum required on the lintel - 200 mm Distinctive The design and different solutions offered ensure the door UNI EN ISO 10077-2, UNI EN ISO 10211-2. to be aesthetically pleasing perfectly suited inoffered any features of and models Value refers to approximately 25 m2 entrance door architectural environment - from modern and traditional

sections andand without pedestrian doors. a high heat insulation and soundproofing. Leda overhead door panels without arewindow sturdy ensure industrial buildings to fine commercial buildings. The doors 2 K Uw = 1.18 W/m can meetgalvanised any industrial and commercialmaterial requirement and add used and the sandwich-type frame effectively protect it from the The value to the building they are installed on. DITEC doors are elements. built to ensure the highest ease and flexibility of use which, in turn, ensures a quick, hassle free and accurate replacement The core insulated with high-density (48 kg/m3), CFC-free polyurethane foam offers high proof old doors. tection from outside temperatures. Reliability overhead door panels are 40 mm thick and Leda DITEC has been awarded ISO 9001-VISION 2000 and IQ NET Great heat insulation coefficient! are available certifications. All products are affixedin withtwo a CE mark.heights - 500 mm and 610 mm.

Wide range of colours and finishes offered Standard

White

White similar to RAL 9010W

similar to RAL 9010W

Silver

Silver similar to RAL 9006W

similar to RAL 9006W

Green

Green similar to RAL 6005W similar to RAL 6005W

Dark Brown

Dark Brown similar to RAL 8014W similar to RAL 8014W

Optionals

streaked grooved

Wide range of colours and finishes offered

(Standard streaked grooved)

Inside

Inside similar to RAL 9010E similar to RAL 9010E

Thermal transmittance according to standards UNI EN 13241 appendix B, UNI EN 12428, UNI EN ISO 10077-2, UNI EN ISO 10211-2. Value refers to approximately 25 m2 entrance door without window sections and without pedestrian doors. Uw = 1.18 W/m2K

15

Streaked cassette

Streaked cassette

Full Flat

Grooved Flat


Product Range > Doors Panel Lift Door Glazed Panel Lift Doors

Extruded aluminium section with acrylic, glass, mesh, grill panels Glazed Panel Lift Doors is a sectional overhead door designed to be combined with thermally insulated panels and extruded aluminium panels, shaped for inserting methacrylate (acrylic), glass, grilled or meshed windows. This combination gives the door a very distinctive look, which enhances the face of both commercial and industrial buildings, where Glazed Panel Lift Doors blends in perfectly as a practical and decorative feature. Glazed Panel Lift Doors makes the environment light and pleasant to work in as it allows natural light to go through the large clear area. The aluminium profiles are highly resistant to the elements and ensure a longer life of the door.

To

Th (m st en to W sa

Sa br

Th st in br

H

Sturd St bee be m

Acrylic panel with 3+9+3 mm chamber

See-through acrylic or satin-finish 3 mm panel See-through or satin-finish 3+3 mm unbreakable glass

Aluminium air grill

Painted drawn wire meshing

Po

Ov

16


1300 780 450

Docks

Product Range > Doors Panel Lift Door

Safety devices give peace of mind during operation

Intro 4 Large Doors 8

All Leda doors are fitted with standard or optional safety devices Torsion springs The steel torsion springs (manufactured to DIN 17223 Safety devices give peace of mind during standards) have been designed to ensure a standard life from 10,000 to 100,000 operation cycles. With standard compliant spring safety.

operation

Safety device against spring breakage All DITEC doors are fitted with standard or optional safety devices This special device immediately closing arepo gnirud dnim fo ecstops aeptheedoor vig panel secfrom ived ytefaS orsion springs Anti-pinching guard Moving photocells in the event of balancing spring breakage.

he steel torsion springs Avoids the risk of fingers from Electronic DSS safety device guard manufacturedAnti-pinching to DIN 17223 being pinched if a hand if rested complete with moving photocells, ecifingers vonedtheydoor tefrom fasmoving labeing nopanel. itpo pinched ro dradnaifwithout tsa hhand tiw dettion f eobstacle ra sroo d CETID llA tandards) have been designed tosof contact (as Avoids the risk nsure a standard life from 10,000 standard for automatic version). if rested on the door o 100,000 operation cycles. sgnirps noisroT slSafety lecomoving tohpdevice gnivoMpanel. against cable draug gnihcnip-itnA With standard compliant spring ecived ytefas SSD cinortcelE morf sregnif fo ksir eht sdiovA sgnirps noisrot leets ehT breakage Safety device against cable breakage ,sllecotohp gnivom htiw etelpmoc detser fi dnah a fi dehcnip gnieb 32271 NID ot derutcafunam( afety. ( elcatsboThis noimmediately tcspecial atnoc tudevice ohtiw immediately .the lenap door gnivom rpanel ood eht nofrom ot dengised neeb evah )sdradnats This special.)snadevice stops stops the door panel from moving oisrev citamotua rof dradnats 000,01 morf efil dradnats a erusne afety devicemoving against spring .selcyc noitarepo 000,001 ot case of breakage of the in case ofinbreakage of the elreturn breturn ac tsniacables. ga ecived ytefaS gnirps tnailpmoc dradnats htiW reakage cables. egakaerb .ytefas Infra-red photocells his special device immediately yletaidemmi ecived laiceps sihT tops the doorThe panelpanel from closing gnivom morf lenapstopped rood eht spotsor down movement is automatically Infra-red photocells gnirps tsniaga ecived ytefaS n the event of balancing spring nruter eht fo egakaerb fo esac ni The panel down movement is reversed if the infrared beam is broken. egakaerb .selbac reakage. automatically stopped or reversed yletaidemmi ecived laiceps sihT Moving photocellsif the infrared beam is broken. sllecotohp der-arfnI gnisolc morf lenap rood eht spots gnirps gnicnalab fo tneve eht ni si tnem evom moving nwod lenap ephotocells, hT Electronic DSS safety device complete with .egakaerb desrever ro deppots yllacitamotua without contact on obstacle (as standard version). .nekorb si mfor aeb automatic derarfni eht fi

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113

Accessories meet all business requirements Accessories meet all business requirements External

Panel Lift

Code Index

stnemeriuqer ssenisub lla teem seirosseccA lanretxE

Internal lanretnI

Handles Handles

sections air grilles Perimeter WindowWindow sections PVC air PVC grilles Perimeter Seals Seals dy and ergonomic, they have Natural or lacquered aluminium These avoid condensation and The seals are made of special s l a e S r e t e m i r e P s e l l i r g r i a C V P s n o i t c e s w o d n i W s e l d n a H These avoid condensation and turdy and ergonomic, they have Natural or lacquered aluminium The seals are made of special en ensure ease window, or vent fumes rubberand andare are locatdn noitasnwindow, e dnoc diowith vawith essingle ehTsingle fodesigned ed am era slato esensure ehT mudouble inimula dereuqvent cal roany lany arutfumes aN vahthe yehtoutside ,cimonogre anti-ageing dnanti-ageing a ydrutS toeto the outside. een designed to ease ofaof or double rubber located .edistuo emethacrylate hmethacrylate t ot semuf yna tpanels npanels ev dmanual na rebdoor bur door gn iegaoperation. -itna elbglazing uod ro elgnis htiw ,wodniw fo esae erusne ot denged ison edon neethe bends and ends ofdoors the doors manual operation. and glazing the of the and onand ood eht fo sdne eht no .noitarepo roodthe un am of the transit opening. bars. side bars. gnizalg dna slenap etalyrcah.streamb on lathe side of the transit opening. tisnart eht fo edis eht They ensure total thus They ensure totalinsulation insulation thus lusni latot erusne yehT avoiding the ingress of of air,air, dust fo ssergni eht gnidiova avoiding the ingress dust and water. .retaw dna and water.

rood nairtsedeP

Portholes

selohtroP

material, qerf si rood eht nehW .ten nOval oitalitneor v drectangular ehcterts dna srabingnacrylic izalg ,rebm ahc htiw slewith nap etpolycarbonate anobracylop htiw ,lairepanels tam cilyrcwith a ni ralchamber, ugnatcePedestrian r ro lavO ortholes door ,ssecca nairtsedep rof glazing bars and stretched ventilation net. val or rectangular in acrylic material, with polycarbonate panels with chamber, glazing bars and stretched ventilation net. When the door is frequently used dettif eb nac ecnartne for pedestrian access, a side gassap nairtsedep a ro entrance can be fitted to the door nap rood eht ni dedda or a pedestrian passage can be kool sti htiw gnirefretni added in the door panel, without interfering with its look.

17


Product Range > Doors

peace of mind.

All accessories are genuine DITEC accessories and have been designed to add value to the door, to ensure long and reliable operation

and peace of mind. Accessories

All accessories are genuine DITEC accessories and have been designed to add value to the door, to ensure long and reliable operation and peace of mind.

gdp prepress milano - 117265

Accessories AllAccessories accessories have been designed to add value to the door, to ensure long and reliable operation and

gdp prepress milano - 117265

Panel Lift Door

4 transmitters GOLGOL 4 transmitters

4W transmitters 2 infrared 08 key-operated GOL GOL 4W transmitters Xel 2 Xel infrared beambeam photocell Deb Deb 08 key-operated handle Fixed code four channels, Four-channel in metal photocell handlewith 8 m long Fixed code four channels, with Four-channel in metal containers Allows the automation to operate at Key-operated handle with cloning or with containers for easy even automation to Key-operated handle with 8 cloning option,option, or with rolling code for easy use even when use wearing theAllows highest the safety levels. cord for remote-operated release rolling code system. Certified when wearing gloves. operate at the highest system. gloves. Can be wall or column mounted. system. m long cord for GOL 4 transmitters GOL 4W transmitters Xel 2 infrared beam photocell Deb or 08 key-operated handle release and directive compliant. safety levels. Can be wall remote-operated Modulated infrared beam. Certified and directive compliant. Fixed code four channels, with Four-channel in metal containers Allows the automation to operate at Key-operated handle with 8 m long column mounted. system. cloning option, or with rolling code for easy use even when wearing the highest safety levels. cord for remote-operated release Modulated infrared beam. system. gloves. Can be wall or column mounted. system. Modulated infrared beam. Certified and directive compliant.

Dod accessories • Compatible with DOD 14 and DOD 15 (also suitable for already existing automations as long as DOD LCG theywith are correctly configured • Compatible LPDM14 • Compatible with DOD 14 and and LPDM 15version (also1.0) suitable for DOD 15 (also suitable for already Chain already existing automations Chainextension extension • The full system includes the motor existing automations as long as LPDM LCG DOD LCG plus are the DOD SBC chain-operated asthey long as they correctly are correctly configured H DOD release with standard chain plus configured version 1.0) - version 1.0) a 3800 mm long • The full system includes extension if • The full system includes the motor required the motor plus the LPDM SBC plus the DOD SBC chain-operated chain-operated release withLCG release with standard chain plus DOD standard chain plus aChain 3800 H DOD a 3800 mm long extension if extension mm long <_ 5000 required NO extension if required < _ 9000 YES

LPDM accessories Dod accessories Chain extension

LPDM HHDOD

H DOD

LPDM < _H5000 When building the system, only use DITEC accessories and safety devices. DITEC automations all feature CE marking and are designed and built in compliance with the safety requirements of the Machinery When building the system, only use of DITEC accessories andCompatibility safety Directive (2006/42/EC), the Electromagnetic devices. Directive (2004/108/EC) and of the Low Voltage Directive When building the system, only use DITEC automations all feature CEother marking and are designed andstandards (2006/95/EC) and of Directives, laws, specific forLPDM built in compliance with the safety requirements of the Machinery special products and situations. Directive (2006/42/EC), the Electromagnetic Compatibility DITEC S.p.A.ofreserves the right to make changes which may Directive (2004/108/EC) and of theDITEC Low Voltage Directive improve the products. S.p.A. always strives to improve its (2006/95/EC) and of other Directives, laws, specific details standards for in this products. For this reason, the technical featured special products and situations. catalogue are not binding. DITEC S.p.A. reserves theshown right to changes The pictures in make this leaflet werewhich takenmay with the consent improve theofproducts. DITEC S.p.A. strives to improve its those concerned or in always public locations. products. For this reason, the technical detailsinfeatured in this Manuals Further information can be found the Technical catalogue are not binding. available at the website: www.ditec.it The pictures shown in this leaflet were taken with the consent of those concerned or in public locations. Further information can be found in the Technical Manuals available at the website: www.ditec.it

18

TM

DOD LCG Chain extension

LPDM NO LCG

< _<_ 9000 5000

YESNO

<_ 9000

YES

accessories and safety devices

TM

- Automatic Industrial Overhead Doors.

230 V and 24 V flashing light with flashing operation controlled from the control panel. Lamp Lamp 230 V and 24 V flashing with 230 Vlight and 24 V flashing flashing operationlight controlled from with flashing operation the control panel.controlled from the control panel.

Industrial Overhead Doors.

Lamp


1300 780 450

Docks

Product Range > Doors Panel Lift Door

LPDM drive unit reliably automates all types of sectional overhead doors.

LPDM

Large Doors 8

Dod

Heavy-duty motor, for total reliability drive unit reliably types ofinstalled sectional overhead Reduced andDod compact sizes;automates can bealleasily when doors. space is at a premium. Modern and smart design. Can be used on different applications on sectional overhead doors: Heavy-duty motor, for total reliability

• In line installation Reduced and compact sizes; can be easily installed when • Pinion and installation. space chain is at a premium. Modern and smart design.

After releasing the automation, the door can be manually operated.

Tried and tested, reliable components, already fitted on other DITEC automations.

Can be used on different on sectional doors: Easy to install; keyed onapplications the drive shaftoverhead or indirectly driven by pinion and chain, does not require Their indirect drive installation allows operating speed to be • In line installation other moving parts. Adjustable rotary limit switch unit. adjusted according to requirements or tackles applications • Pinion and chain installation.

Two manual systems: Easy torelease install; keyed on the drive shaft or indirectly driven by pinion and chain, does not require other moving parts. 1. With cable: fast release system. Adjustable rotary limit switch unit.

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92

when side space is not available.

Leveller 95

Dod automations are complete with security, control and monitoring parts compliant with current standards.

Drawbridge 99

2. With drive rod or chain. Two manual release systems:

Seals 103

• With cable: release system. the door can be manually operated. Their indirect drive instalAfter releasing thefastautomation, • Withoperating drive rod or chain. lation allows speed to be adjusted according to requirements or tackles applications when side space is not available.

Dimensions Dimensions

Motor configurations Motor configurations External and vertically mounted

100

(Standard)

100

5

Intro 4

Barriers 106 Ramp 107 Structures 108 Shelters 109

320

Scissor Lift 110 Freight Hoists 113 Code Index

204

135

30

65 External and horizontally mounted

PLUS

ct and Compa rful powe Internal and vertically mounted - only VL sliding system

Pinion and chain driven

19

10

Automatic Industrial Overhead Doors


Product Range > Doors Panel Lift Door

Leda

Industrial Sectional Doors

Best use of transit openings Weather resistant Maximum safety Large openings Optimises goods transit

Main Features Vertically operated industrial door consisting of thermally insulated horizontal panels sliding on wheels within side runners. The door is fitted with ball joints between the panels, it bends near the ceiling and then stops parallel to it (NL- HL- RLO/RLB - IL- HLIL versions) or continues further up along the opening (VL version), thus leaving the entire access opening free. Panel The panel is 40 mm thick and is supplied in two different heights: 500 and 610 mm. The panel is made of a galvanised steel double wall manufactured with the Sendzimir procedure, then treated with primer and polyester resin paint and subject to a further treatment which ensures a high surface strength. The finish on the outside of the sheet metal has a STREAKED EFFECT whilst the finish on the inside of the sheet metal has an embossed orange peel effect; the external side of the panel is made of horizontal groove panels. Anti-pinching and anti-crushing “finger-saving” device. Insulation The insulation fitted to the panels is made of 48 kg/m3 density, self extinguishing Class B2, CFCs-free (chlorofluo-rocarbons)polyurethane foam. The average thermal transmittance value for the whole door installed is highly impressive: U = 1.51 W/m2k. Seals The seals supplied as standard are anti-ageing EPDM seals and are located in the following hinged points: a) intermediate seals between consecutive panels; b) lower doorstop lip seal; c) upper doorstop finned seal fitted to seal the door near the lintel; d) vertical seals, fitted to the side uprights. Surround profiles The sides of the door panels are fitted with galvanised, white powder coated steel profiles which serve the purpose of keeping the consecutive panels that make up the sectional overhead door aligned, as well as holding against the insulated panel the support side hinge for the sliding rollers. In the bottom section of the first panel a hideaway seal-holder aluminium profile is fitted, whilst the upper section of the last panel is enclosed in a black painted aluminium profile which acts as holder for the closure lip seal. Runners and sliding systems The runners are made of galvanised cold profiled sheet metal suitably shaped to hold the side rollers. The joint between the runners that make up the door is spot welded and its size is calculated according to the door dimensions and sliding unit type. The sliding operation of the panels inside the runners is ensured by silent operation rollers fitted with very strong plastic wheels with radial ball bearings. Springs and lifting cables The suitably loaded torsion springs are made of a steel cable: they are located inside the upper guide section, on a horizontalshaft directly connected with the cable winder pulleys made of die-cast aluminium and fitted with helicoi-dal slots which hold themultiwire steel cables used to lift the door. Safety devices The fully certified safety devices are fitted as standard on all doors and will operate in the following cases, in order to avoid the facing from accidentally falling: a) in case of traction cable breakage; b) in case of torsion spring breakage. Warning Only for doors with PL > around 4000 mm, in HL and VL elevations, all panel dark colours, including those available in the standard range such as colours RAL 8014, RAL 6005 and also all non standard dark colours, may cause panel warping due to sunlight, for which we cannot be held responsible: please see the technical manual to find possible solutions to reduce the problem. 20


1300 780 450

Product Range > Doors

Docks

Panel Lift Door Intro 4

Leda LS Manual version

Large Doors 8 Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge

99

Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109

Sandwich panels profiled with double hot-galvanised steel sheet metal, thermally insulated with CFCs-free polyurethane foam. Base model with horizontal panels; RAL 9010E white embossed, orange peel internal side. Standard external colours: White RAL 9010W, Dark brown RAL 8014W, Green RAL 6005W, Silver RAL 9006W ■ Sliding rails made of galvanised sheet metal suitably shaped to hold different types of sliding units. ■ Standard safety devices against torsion spring breakage and traction cable breakage. ■ Spacer back template. ■ Balancing system made with suitable torsion springs tested for at least 20,000 cycles (with the sole exception of those shown in grey = 10,000 cycles). ■ Side hinges, and rollers constructed of electrically-galvanised steel. ■ Galvanised steel internal lock bolt (not supplied with the motorised or automatic version). ■ Lower doorstop lip seal. ■ Internal and external lifting handle.

Scissor Lift 110 Freight Hoists 113 Code Index

21


Product Range > Doors

Lisbon LSD

Motorised version with person present contro

Panel Lift Door

Leda LSD

Main Fe

Lisbon doo technical f sion Dod 14 Extern Provis Motor Built i limit s

Motorised version with person present control

Leda door manufactured in compliance with the general technical features previously described in the manual version Min. dimensions PL 1800 X PH 1780 ■ LPDM 14 230 V ~ 3 A heavy-duty use gear motor.

■ External plastic casing painted.

The drive shaft is suitable for the following installation types: LSD ■ Provision for a remote handle-operated release system. axial mounting ■ Motor protected by an internal temperature The chainprobe. driven version is: normally optionally ■ Built in electrically operated brake and internal rotary limit switch. compulsory only for HL2 elevations (for all dimensions: already included in th included in the price) Open/close selector switches in double insulated enclosure, complete with 10 m ca The drive shaft is suitable for the followingmotor installation types: • LSD "Person present" operation. N.B. For general information on the door and panel colours, see page 16. • axial mounting

The chain driven version is: NL LSDNL NL Sliding System* • normally optionally PH/PL 2500 2750 3000 3250 3500 3750 • compulsory only for HL2 elevations (for all dimensions: already included in the1,863 price) 1,932 1,651 1,700 1,757 1,819 2280 and VL elevation (for PH > 3610 mm: already included in the1,850 price) 1,898 1,720 1,771 1,945 2,037 2500

4000

4250

4

1,998

2,046

2

2,088

2,138

2

2,275

2

2,344

2

Open/close selector switches in double 2780 insulated enclosure, 10 m cable EU industrial 1,837 1,894 complete 1,959 with 2,034 2,086 and 2,139 2,231 plug for connection to the gear motor. 3000 1,874 1,933 2,035 2,080 2,136 2,229 2,288 3280

2,003

2,106

2,154

2,299

2,359

2,446

2,501

2,584

2

3610

2,147

2,199

2,309

2,362

2,469

2,517

2,579

2,730

2

4000

2,260

2,329

2,441

2,499

2,627

2,666

2,819

2,928

2

4220

2,312

2,410

2,499

2,631

2,675

2,846

2,891

2,985

3

4500

2,515

2,558

2,724

2,783

2,938

2,978

3,162

3,227

3

4830

2,602

2,649

2,817

2,964

3,041

3,084

3,275

3,343

3

5110

2,662

2,799

2,973

3,043

3,205

3,272

3,365

3,547

3

5550

2,874

2,972

3,125

3,206

3,371

3,442

3,666

3,717

3

LSDRNL Extra charge for optional fitting a DOD chain driven motor 87.00 €

VL

VL Sliding System

LSDVL

PH/PL 2280 2500 2780 3000 3280 3610

2500

2750

3000

3250

3500

3750

4000

4250

1,817

1,871

1,933

2,001

2,050

2,126

2,198

2,251

1,892

1,948

2,035

2,088

2,140

2,242

2,297

2,352

2,021

2,085

2,156

2,237

2,295

2,353

2,455

2,503

2,062

2,127

2,239

2,289

2,350

2,451

2,517

2,579

2,204

2,317

2,370

2,529

2,596

2,692

2,752

2,843

2,363

2,420

2,540

2,599

2,716

2,769

2,838

3,004

4

LSDRVL Extra charge for optional fitting a DOD chain driven motor 87.00 €

VL Sliding System - (elevation exclusively furni

LSDRVL

22

4000 4220 4500 4830 5110 5550

2,573

2,649

2,772

2,835

2,976

3,019

3,188

3,308

2,630

2,738

2,835

2,981

3,030

3,218

3,267

3,370

2,854

2,901

3,083

3,149

3,319

3,363

3,565

3,637

2,949

3,001

3,186

3,347

3,432

3,480

3,689

3,763

3,357

3,435

3,613

3,687

3,789

3,988

3,524

3,614

3,795

3,874

4,119

4,175


1300 780 450

Docks

Product Range > Doors

Lisbon LSA

Panel Lift Door

Leda LSA Automatic version with moving photocells safety system

Best use of transit openings Weather resistant Maximum safety Large openings Optimises goods transit

Intro 4 Large Doors 8

Automatic version with moving photocells safety system Panel Lift

15

High Speed

62

Main FeaturesPVC 81

Leda door manufactured in compliance with the general technical features previously described in the manual version

Lisbon door manufactured in complian cal features previously described in the DockBrain 86 Dod 14 230 V ~ 3 A heavy-duty use ge Dock Intro 92 External plastic casing painted Provision for anyLeveller 95 manually operated Motor protectedDrawbridge by an internal 99 tempe Built in electrically operated brake an Release system Seals 103 for maintenance ope

■ LPDM 14 230 V ~ 3 A heavy-duty use gear motor. ■ External plastic casing painted. ■ Provision for any manually operated emergency devices. ■ Motor protected by an internal temperature probe. ■ Built in electrically operated brake and internal rotary limit switch.

Barriers 106 Ramp 107

■ Release system for maintenance operation.s

Min. dimensions PL 1800 X PH 1780

Structures 108

The drive shaft is suitable for the following installation types: • LSA The drive shaft is suitable for the following installation types: • axial mounting

Shelters 109

already inclusive in the prices) and VL elev Scissor Lift 110 inclusive in the prices)

- LSA

The chain driven version is: - axial mounting • normally optional The chain driven version is: compulsory, as well as with overall dimensions - normally optional PL > 7000 and or PH > 5550 only for HL2 elevations,and VL elevation PHas >with 3610 compulsory,(for as well overallmm). dimensions PL > 7000 and or PH > 5550 (already inclusive in the prices), only for HL2 elevations (for all dimensions, • E1A electronic control panel (optional PT3 push-button unit).

E1A electronic control panel (optional PT3 pu Freight Hoists 113

Bottom edge with doorstop lip seal Code Index DSS safety device complete with moving photo

N.B. For general information on the door and panel co

• Bottom edge with doorstop lip seal.

NL

• DSS safety device complete withLSANL moving photocells, without contact on obstacle. NL Sliding System*

PH/PL 2280 2500 2780 3000 3280 3610 4000 4220 4500 4830 5110 5550

springs 20,000 cycles

2500

2750

3000

3250

3500

3750

4000

4250

4500

4750

5000

5500

6000

65

1,859

1,906

1,965

2,026

2,071

2,140

2,206

2,252

2,298

2,364

2,419

2,556

2,922

3,

1,928

1,979

2,058

2,104

2,153

2,245

2,296

2,345

2,415

2,463

2,522

2,703

3,084

3,

2,045

2,101

2,167

2,242

2,292

2,346

2,438

2,482

2,535

2,628

2,689

2,939

3,280

3,

2,081

2,141

2,242

2,288

2,342

2,436

2,495

2,551

2,637

2,694

2,759

3,016

3,310

3,

2,260

2,363

2,410

2,603

2,667

2,752

2,761

2,844

2,936

2,998

3,072

3,291

3,521

3,

2,449

2,503

2,614

2,668

2,777

2,827

2,838

2,989

3,034

3,086

3,245

3,409

3,625

3,

2,564

2,634

2,748

2,806

2,936

2,976

3,078

3,186

3,199

3,406

3,494

3,720

3,882

4,

2,573

2,669

2,757

2,891

2,937

3,105

3,149

3,242

3,415

3,485

3,649

3,810

4,106

4,

2,775

2,819

2,982

3,043

3,196

3,236

3,419

3,484

3,551

3,705

3,795

4,137

4,302

4,

2,860

2,908

3,075

3,223

3,298

3,342

3,531

3,601

3,769

3,829

3,925

4,278

4,617

4,

2,921

3,056

3,231

3,299

3,462

3,529

3,621

3,802

3,867

3,933

4,183

4,368

4,779

5,

3,133

3,229

3,383

3,464

3,627

3,698

3,922

3,972

4,238

4,284

4,385

4,697

5,004

5,

LSARNL Extra charge for optional fitting a DOD chain driven motor 87.00 € LSARNL

6160° 6770° 7000°

VL

LSAVL

NL Sliding System* 3,475

3,642

3,715

3,824

3,967

4,139

4,237

4,423

4,548

4,687

4,929

5,696

6,

3,617

3,795

3,905

4,089

4,198

4,389

4,508

4,660

4,834

4,992

6,137

6,

3,677

3,892

4,053

4,162

4,276

4,498

4,664

4,849

4,977

5,213

5,311 23 5,474

6,373

6,

VL Sliding System

springs 20,000 cycles


PL

LIFTING G

MOVIDA 1300

min.

PH max.

min.

HA max.

min.

SS (1) SD (1) max.

min.

min.

G

Weight in Kg.

min.

max.

780 450 G

Product Range> >Doors Doors HA HARange Product 1100 3500 1800 8000

1800

1780

2500

7000

960

130

100

100

2860

3700

Docks 150

PH - HA + 1100

150Weight in Kg.150

PH - HA + 1100

150

120

PH

PH

Panel Lift Door

Lifting Types

RL (residential) Panel Lift Door G G Leda

HA

HA Leda Lifting Types

Lifting LIFTING PH

PHMOVIDA NL (normal) NL(normal lift)

1800

1100

5500 PL

min.

8000

1680

PH 1800

max.

min.

8000 3500

1780 1780

G G

max.

160

5550HA min.

5570

HA G

1800 1100

PH PH

HA

3280

1800

8000

max.

SS (1) 2860

See table page.28

100

4460

SD (1)

G

min.

min.

min.

150 100

150 100

PH + 1060 3700

PH

HA HA PH PH

1100 1800

1680 1780

G

lift) HL2 (hight) HAHL2(high

NL (normal)

VL(vertcal lift) G VL (vertical) G

PH

5500 8000

1800

HA

6500

130

7000

510

5550

1800 1800

HA PH PH

8000 8000

7000

960

3280

160

5550

2860

18005570 1780 1780

5550 7000

max. 500 120 700

PH + 330

150

Up to PH5570 and max weight 500Kg, fixed HA 420mm, over PH 5570 and max weight 700Kg, fixed HA 510mm RL (residential)

HL1 (hight) HL1(high lift) G

250

420

2500

1800

100

2860 100 150

100 150

See table PH page.28 - HA + 1100

4460

420 4500

150

500

200

PH + 1030

200

PH + 1330

150

PH + 560

150

PH - HA + 560

650 250 575

285 150 150

PH + 330 510

200 150 150

PH + 1060

500 600 700

G

Up to PH5570 and max weight 500Kg, fixed HA 420mm, over PH 5570 and max weight 700Kg, fixed HA 510mm pulleys) HL1 RLO (hight) (reduced-outside G HARLO(reduced-outside G G HA

PH

G

PH PH

1800

6500

1800 1800 6500 8000 1800

6500

1780

7000 4500

1800 1780 1780

960 285

4500

5550 4500

2860 200

5550

490 5550

5550

PH + 330

> 5550

550

2860

200

200

200150

150

200

200

4460

PH + 1030

650 290

PH + 1330

575 290

200 PH - HA + 1100

HL2 RLB(reduced-back RLB (hight) (riduced-back springs) springs)

HA HA

1800

PH

PH

G

RLO (reduced-outside pulleys) HLIL(HL+IL) HLIL (HL + IL) G HA G HA PH

HA

G

1800

PH

1800

8000 7000

7000

1780

1800

6500

1780

4500

285

1800

7000

1780

5550

960

1800

7000

6500

1780

4500

5550

5550

490

1800

G

PH

1800

HA HA

7000

1780

5550

(1) For dimension see page 21-22. HLIL (HLmotorized + IL)

SS

G

Sectinal doors technical data sheet 1800

HA PH

1780

1800

7000

1780

PH + 560

150

4460

PH + 1030

290

150

150

PH - HA + 560

575

200

200

PH + 1330

290

4460

150

500 650 150

150

PH + 560

550

575 700

SD 960

4460

APPLICATION WITH REVEAL 490 5550

3150

150

150

2

24/10/11

PH - HA + 560

DITEC S.p.A 575

44

COMPENSATING COLUMN 150 650 X 50 X 2 150

150

550

PH

700

200

960

3150

5550

600

200

PL - 25 -

NON REVEAL APPLICATION

DI (double inclination)

37

7000

150

550

200

> 5550

PH PH

HA

> 5550

1800

RLB (riduced-back springs) IL (inclined) DI (doubleinclination) inclination) DI(double

150

500

575

(1) For motorized dimension see page 21-22.

24

Sectinal doors technical data sheet

- 25 -

24/10/11

70

DITEC S.p.A

The technical data shown in this Price List are not binding. For more details,

HA

490

50

G

VL(inclined) (vertical) IL(incline) IL G G


1300 780 450

Docks

Product Range > Doors Panel Lift Door Lisbon

* The last panel from 610 is cut The order of the panels can be modified when ordering (if there are no accessories with door blade) .

Door blade composition Leda Door blade composition

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PANEL POSITION FROM THE BOTTOM 1 610 610 500 500 610 610 610 500 500 610 610 610 610 500 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610

2 500 610 500 500 500 610 610 500 500 500 610 610 610 500 500 610 610 610 610 500 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610

3 610 610 500 500 500 500 610 500 500 500 500 610 610 500 500 500 610 610 610 500 500 610 610 610 610 500 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610

4

500 610 610 610 610 500 500 500 500 500 610 500 500 500 500 610 610 500 500 500 610 610 610 500 500 610 610 610 610 500 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610 610

5

500 610 610 610 610 610 500 500 500 500 500 610 500 500 500 500 610 610 500 500 500 610 610 610 500 500 610 610 610 610 500 610 610 610 610 610 610 610 610 610 610 610 610 610 610

6

610 610 610 610 610 610 500 500 500 500 500 610 500 500 500 500 610 610 500 500 500 610 610 610 500 500 610 610 610 610 500 610 610 610 610 610 610 610 610

7

610 610 610 610 610 610 500 500 500 500 500 610 500 500 500 500 610 610 500 500 500 610 610 610 500 500 610 610 610 610 500 610 610

8

610 610 610 610 610 610 500 500 500 500 500 610 500 500 500 500 610 610 500 500 500 610 610 610 500 500 610

9

610 610 610 610 610 610 500 500 500 500 500 610 500 500 500 500 610 610 500 500 500

* The last panel from 610 is cut The order of the panels can be modified when ordering (if there are no accessories with door blade) .

10

610 610 610 610 610 610 500 500 500 500 500 610 500 500 500

11

610 610 610 610 610 610 500 500 500

12

610 610 610

PH 1780 1890 2060 2170 2280 2390 2500 2560 2670 2780 2890 3000 3110 3170 3280 3390 3500 3610 3720 3780 3890 4000 4110 4220 4330 4390 4500 4610 4720 4830 4940 5000 5110 5220 5330 5440 5550 5610 5720 5830 5940 6050 6160 6220 6330 6440 6550 6660 6770 6830 6940 7000*

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge

99

Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

The technical data shown in this Price List are not binding. For more details, refer to the relevant leaflets and Technical manuals, also available from the website: www.ditecentrematic.com

PH 1780 1890 2060 2170 2280 2390 2500 2560 2670 2780 2890 3000 3110 3170 3280 3390 3500 3610 3720 3780 3890 4000 4110 4220 4330 4390 4500 4610 4720 4830 4940 5000 5110 5220 5330 5440 5550 5610 5720 5830 5940 6050 6160 6220 6330 6440 6550 6660 6770 6830 6940 7000*

25


NL - NORMAL LIFTING HA

SS (1)

SD (1)

G

Weight

min

PL

max

min

max

min

min

min

min

max

1800

7000

1780

5550

420

150

150

PH + 1060

500

Product Range > Doors LS- LSD- LSA- LSDR- LSAR

PH

LSAR + SP3F

1800

8000

1780

5550

420

150

150

PH + 1060

500

LS- LSD- LSA- LSDR- LSAR

1800

7000

1780

5550

510

150

150

PH + 1060

750

Panel Lift Door LSAR + SP3F

SPRINGS

150 20,000. PH + 1060 version: (over PH 3,000; from 10,000 to 3,000 movements). (1) For motorized version see overall dimensions on page 19-20 Heavy usage supplement available on request: Leda 25,000 - 50,000 - 100,000, only after technical office check. For versionLIFTING only G = PH + 500 NLmanual - NORMAL 1800

8000 7000 510standard 150 Number1780 of movements for

750

NL - NORMAL LIFTING SPRINGS

Number of manoeuvres for standard version: 20.000. (over PH 3.000; from 10.000 to 3.000 manoeuvres) PLrequest: 25.000 - 50.000 PH SStechnical (1) SD (1) check. G Heavy usage supplement available on - 100.000,HA only after office

LS- LSD- LSA- LSDR- LSAR

Weight

min

max

min

max

min

min

min

min

max

1800

7000

1780

5550

420

150

150

PH + 1060

500

LSAR + SP3F

1800

8000

1780

5550

420

150

150

PH + 1060

500

LS- LSD- LSA- LSDR- LSAR

1800

7000

1780

5550

510

150

150

PH + 1060

750

LSAR + SP3F

1800

8000

1780

7000

510

150

150

PH + 1060

750

(1) For motorized version see overall dimensions on page 19-20 For manual version only G = PH + 500 1500

G = (*)

= (*)

1000

HA

A

SPRINGS Number of manoeuvres for standard version: 20.000. (over PH 3.000; from 10.000 to 3.000 manoeuvres) Heavy usage supplement available on request: 25.000 - 50.000 - 100.000, only after technical office check.

(*) additional ceiling bracket (*)Eventual Eventuale calata aggiuntiva

160

585

G = (*)

= (*)

1000 HA (mm)

A (mm)

420

310

510

400

HA

A

1500

PH

(*) additional ceiling bracket (*)Eventual Eventuale calata aggiuntiva

160

585 200

HA (mm)

A (mm)

420

310

510

150

400

PH

Limite massimo ingombri, accessori inclusi Maximum size limit, including accessories 200

Sectinal doors technical data sheet

- 30 200

24/10/11

DITEC S.p.A

26


1300 780 450

Docks

Product Range > Doors Panel Lift Door

Intro 4

Leda

Large Doors 8

NL - NORMAL LIFTING

HA PH

B

Panel Lift

15

High Speed

62

PVC 81

NL

DockBrain 86 Dock Intro 92

HA

Leveller 95

246 ± 5

192 ± 5

Drawbridge

99

B' CTB ANTI-JUMPING KIT

Seals 103 Barriers 106

G B - B'

Ramp 107 Structures 108 Shelters 109 Scissor Lift 110

CEILING FIXING BRACKET

Freight Hoists 113

420

PH

Code Index

A

A' FALSE HEADROOM WITH INSULATED STAVE PANEL

APPLICATION ELEMENT IN PANEL

SS

PL

SD 150

150x50x2 COMPENSATION COLUMN

2

50

167

A - A'

OUT FROM DOORWAY

INDOOR WAY

70

Sectinal doors technical data sheet

- 31 -

24/10/11

DITEC S.p.A

27


Product Range > Doors HL - HIGH LIFTING Panel Lift Door

1800

SPRINGS Number of movements for standard version: 20,000. (over PHPH3,000; from 10,000 to 3,000 HA SS (1) movements). SD (1) G Weight Heavy usage supplement available on request: max min max min max min min min max only after office check.650 7000 25,000 1780 - 50,000 5550 - 100,000, 960 2860 150 technical 150 PH - HA + 1100

1800

8000

1780

7000

960

2860

150

150

PH - HA + 1100

650

1800

7000

1780

5550

2860

4460

150

150

PH - HA + 1100

575

1800 PL

8000

1780PH

5550

2860 HA 4460

PL min

Leda

LS- LSD- LSA- LSDR- LSAR

HL - HIGH LIFTING HL - HIGH LSARLIFTING + SP3F LS- LSDR- LSAR LSAR + SP3F

maxdimensions min min (1) For motorized version min see overall onmax page 19-20 LS- LSD- LSA- LSDR- LSAR

1800

7000

1780

5550

960

150(1) SS

150(1) SD

PH - G HA

max

min

min

min

max

2860

150

150

PH - HA + 1100

650

SPRINGS LSARof+ manoeuvres SP3F 1780 (over 7000PH 3.000; 960 from2860 150 PH - HA + 1100 Number for1800 standard 8000 version: 20.000. 10.000 to150 3.000 manoeuvres) LS- LSDR1800 7000 PH - HA + 1100 Heavy usageLSAR supplement available on request:1780 25.000 -5550 50.000 -2860 100.000, 4460 only after 150 technical 150 office check. LSAR + SP3F

1800

8000

1780

5550

2860

4460

150

150

PH - HA

(1) For motorized version see overall dimensions on page 19-20 G

430

SPRINGS 1500 = (*) = (*) 1000 Number of manoeuvres for standard version: 20.000. (over PH 3.000; from 10.000 to 3.000 manoeuvres) Heavy usage supplement available on request: 25.000 - 50.000 - 100.000, only after technical office check.

G = (*)

HA

1500

= (*)

1000

430

(*) Eventual Eventualeadditional calata aggiuntiva (*) ceiling bracket

HA

560

(*) Eventual Eventualeadditional calata aggiuntiva (*) ceiling bracket 690

560

245

PH

690

245

PH

200

150

Maximum size limit, including accessories Limite massimo ingombri, accessori inclusi

28 200

200

150

575 Weight

650 575 575


1300 780 450

Docks

Product Range > Doors Panel Lift Door

Intro 4

Leda

Large Doors 8

HL - HIGH LIFTING

HA

Panel Lift

15

High Speed

62

PH

HL

B

PVC 81 DockBrain 86

300 Âą 60

Dock Intro 92 Leveller 95 B'

Drawbridge

REAR SHOCK ABSORBER

G

99

HA

Seals 103 B - B'

Barriers 106 Ramp 107 Structures 108 Shelters 109

CEILING FIXING BRACKET

Scissor Lift 110 Freight Hoists 113 Code Index

A'

SS

PL

PH

A

A - A'

SD 150

150x50x2 COMPENSATION COLUMN

50

2

OUT FROM DOORWAY

INDOOR WAY

70

For PL > 4000 and dark colours, verify fitting spacers as per page 43

Sectinal doors technical data sheet

- 33 -

24/10/11

DITEC S.p.A

29


LS- LSDR- LSAR

1800

7000

1780

5550

PH + 330

150

150

500

LSAR - SP3F

1800

8000

1780

5550

PH + 330

150

150

500

(1) For motorized version see overall dimensions on page 20-21

Product Range > Doors

SPRINGS Number of manoeuvres for standard version: 20.000 Heavy usage supplement available on request: 25.000 - 50.000 - 100.000, only after technical office check. SPRINGS

HA

Panel Lift Door

Number of movements for standard version: 20,000. Heavy usage supplement available on request: 25,000 - 50,000 - 100,000, only after technical office check.

Leda

VL -VL VERTICAL LIFTING - VERTICAL LIFTING PL

560

min LS- LSD- LSA- LSDR- LSAR 1800 LS- LSDR- LSAR

1800

PH

HA

SS (1) SD (1) Weight

max

min

max

min

min

min

7000

1780

3610

PH + 330

150

150

max 600

7000

1780

4000

PH + 330

150

150

600

LSAR - SP3F

1800

8000

1780

4000

PH + 330

150

150

600

LS- LSDR- LSAR

1800

7000

1780

5550

PH + 330

150

150

500

LSAR - SP3F

1800

8000

1780

5550

PH + 330

150

150

500

VL - VERTICAL LIFTING

(1) For motorized version see overall dimensions on page 20-21 SPRINGS PL PH HA Number of manoeuvres for standard version: 20.000 Heavy usage supplement available on request: after min 25.000 max - 50.000 min - 100.000, max onlymin technical office check.

560

240

LS- LSD- LSA- LSDR- LSAR 1800

HA

LS- LSDR- LSAR

1800

SS (1) SD (1) Weight min

min

max

7000

1780

3610

PH + 330

150

150

600

7000

1780

4000

PH + 330

150

150

600

LSAR - SP3F

1800

8000

1780

4000

PH + 330

150

150

600

LS- LSDR- LSAR

1800

7000

1780

5550

PH + 330

150

150

500

LSAR - SP3F

1800

8000

1780

5550

PH + 330

150

150

500

(1) For motorized version see overall dimensions on page 20-21

PH

SPRINGS Number of manoeuvres for standard version: 20.000 Heavy usage supplement available on request: 25.000 - 50.000 - 100.000, only after technical office check.

HA

240

200

PH

150

Limite massimo ingombri, accessori inclusi Maximum size limit, including accessories 200 240 Sectinal doors technical data sheet

200

- 34 -

24/10/11 150

Limite massimo ingombri, accessori inclusi Maximum size limit, including accessories 200

Sectinal doors technical data sheet

PH

30

- 34 -

24/10/11

DITEC S.p.A

DITEC S.p.A


1300 780 450

Docks

Product Range > Doors Panel Lift Door

Intro 4

Leda

Large Doors 8

VL - VERTICAL LIFTING

Panel Lift

15

High Speed

62

HA PH

REAR SHOCK ABSORBER

VL

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95

END PROFILE AT “C” FOR FITTING SHOCK ABSORBER

Drawbridge

99

Seals 103

HA

Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

A'

SS

PL

SD

150x50x2 COMPENSATION COLUMN

150

2

50

PH

A

OUT FROM DOORWAY

INDOOR WAY

70

For PL > 4000 and dark colours, verify fitting spacers as per page 43

Sectinal doors technical data sheet

- 35 -

24/10/11

DITEC S.p.A

31


Product Range > Doors RLO / RLB - REDUCED LIFTING RLO

PanelPLLift Door min 1800

PH

max

min

6500

1800

Leda

SPRINGS HA SS standardSD G Weight Number of movements for version: 20,000. max PH 3,000; minfrom 10,000 min to 3,000min min max (over movements). Heavy usage supplement available on request: 4500 285 200 200 PH + 1030 290 25,000 - 50,000 - 100,000, only after technical office check.

RLO // RLB -- REDUCED LIFTING RLO/ RLB RLB RLO - REDUCED LIFTING PL PL PL

RLB RLO HA HA min

PH PH PH

min max min max min max min max min min max min max 1800 6500 1800 4500 200 1800 6500 1800 4500 285 1800 6500 1800 4500 (1) For motorized version see overall dimensions on page 20-21

SS (1) SS min

SD (1) SD min

min 200 200

min 200 200

G G min PH min + 1330

Weight Weight max max 290

PH + 1030

290

SPRINGS Number of manoeuvres for standard version: 20.000. (over PH 3.000; from 10.000 to 3.000 manoeuvres) RLB Heavy usage supplement available on request: 25.000 - 50.000 - 100.000, only after technical office check. HA

SS (1)

SD (1)

G

Weight

min min

PL PL

max max

min min

PH PH

max max

min

min

min

min

max

1800 1800

6500 6500

1800 1800

4500 4500

200

200

200

PH + 1330

290

(1) (1) For For motorized motorized version version see see overall overall dimensions dimensions on page 20-21

HA

325

SPRINGS SPRINGS G Number for Number of of manoeuvres manoeuvres for standard standard version: version: 20.000. 1500 = (*)(over PH 3.000; from 10.000 =to(*)3.000 manoeuvres) 1000 Heavy Heavy usage usage supplement supplement available available on on request: request: 25.000 - 50.000 - 100.000, only after technical office check.

1500 1500

== (*)

G

= (*)

1000

(*) ceiling bracket (*) Eventual Eventualeadditional calata aggiuntiva

222

HA HA

325 325

600

(*) ceiling bracket (*) Eventual Eventualeadditional calata aggiuntiva (mollesprings) posteriori) RLB (back

222 222

PH

600 600

RLB (mollesprings) posteriori) RLB (back PH PH

200

200 300

Limite massimo ingombri, accessori inclusi Maximum size limit, including accessories 32

200

200

200 Sectinal doors technical data sheet

- 36 -

24/10/11

DITEC S.p.A


1300 780 450

Docks

Product Range > Doors Panel Lift Door

Intro 4

Leda

Large Doors 8

RLO / RLB - REDUCED LIFTING

HA PH

RLO

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92

HA

RLO VERSION SLIDING

Leveller 95 35

Drawbridge

65

99

Seals 103 Barriers 106

G

Ramp 107

HA

PH

B

RLB

Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113

RLB SLIDING VERSION B'

Code Index

G

PH

B - B'

A

A' CEILING FIXING BRACKET

SS

PL

SD

200x50x2 COMPENSATION COLUMN

A - A'

200

50

2

OUT FROM DOORWAY

INDOOR WAY

70

Sectinal doors technical data sheet

- 37 -

24/10/11

DITEC S.p.A

33


Product Range > Doors Panel Lift Door

Leda

IL - INCLINED LIFTING IL - INCLINED LIFTING

SPRINGS Number of movements for standard version: 20,000. (over PH 3,000; from 10,000 to 3,000 movements). Heavy usage supplement available on request: 25,000 - 50,000 - 100,000, only after technical office check.

IL - INCLINED LIFTING PL

PL

PH

min

max

1800

7000 7000

min

max

min

1800

7000

1780

1800

1800

PH

HA max HA

min

1780

5550

490

1780

5550

550

min

max

min

5550

490

G

α

min G

maxα

maxWeight

150

min

PH + 560

45°

500

150

150

PH + 560

PH + 560

45°

700

SS

SD

SS

min

SDmin

min

150

150

150

min

Weight

max 45°

SPRINGS 7000 1780 5550 550 150 150 PH + 560 45° Number of manoeuvres for standard version: 20.000. (over PH 3.000; from 10.000 to 3.000 manoeuvres) Heavy usage supplement available on request: 25.000 - 50.000 - 100.000, only after technical office check.

max 500 700

SPRINGS Number of manoeuvres for standard version: 20.000. (over PH 3.000; from 10.000 to 3.000 manoeuvres) Heavy usage supplement available on request: 25.000 - 50.000 - 100.000, only after technical office check. 00

10

0 46

00

10

*) =( G

46 0

*)

=(

*)

=(

G

00

15

*)

=(

00

(*) calata aggiuntiva (*) Eventuale Eventual additional ceiling bracket

HA

15

160

490

HA

(*) calata aggiuntiva (*) Eventuale Eventual additional ceiling bracket 255

160

PH

490

255

200

PH

100

Maximum size limit, including accessories Limite massimo ingombri, accessori inclusi 200

34

Sectinal doors technical data sheet

- 38 -

200

24/10/11

DITEC S.p.A


1300 780 450

Docks

Product Range > Doors Panel Lift Door

Intro 4

Leda

Large Doors 8

IL - INCLINED LIFTING

HA PH

IL IL

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86

B

Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103

B'

HA

Barriers 106 Ramp 107

G

α

Structures 108 Shelters 109 B - B'

Scissor Lift 110 Freight Hoists 113 Code Index

PH

CEILING FIXING BRACKET

A'

A

SS

PL

SD

A - A'

150

150x50x2 COMPENSATION COLUMN

50

2

OUT FROM DOORWAY

167

Sectinal doors technical data sheet

INDOOR WAY

70

- 39 -

24/10/11

DITEC S.p.A

35


Product Range > Doors SPRINGS Number of movements for standard version: 20,000. (over PH 3,000; from 10,000 to 3,000 movements) Heavy usage supplement available on request: 25,000 - 50,000 - 100,000, only after technical office check.

Panel Lift Door

Leda

HLIL - HIGH INCLINED LIFTING

HLIL - HIGH INCLINED LIFTING PL

PH

HLIL LIFTING min - HIGH maxINCLINED min max 1800

7000

1800

PL

5550

HA

SS

SD

G

α

Weight

min

max

min

min

min

max

max

960

4460

150

150

PH - HA + 560

45°

650

SS

SD

G

α

Weight

min

min

min

max

max

4460 150 INCLINED LIFTING

150

PH - HA + 560

45°

650

PH

HA

min

max

min

max

min

1800

7000

1800

5550

960

max

Inclination angle (α) linked to h (misured at 1m from α)

α

h

INCLINED LIFTING Inclination angle (α) linked to h (misured at 1m from α)

α

h (mm)

α

α h (mm)

1m α

31° 287 16° 18 1° 1m 32° 306 17° 35 2° 33° 325 18° 52 3° 34° 344 19° 70 4° α α α h (mm) h (mm) 35° 364 20° 88 5° 31° 287 16° 18 1° 36° 384 21° 104 6° 32° 306 17° 35 2° 37° 404 22° 123 7° 33° 325 18° 52 3° 38° 425 23° 141 8° 34° 344 19° 70 4° 39° 445 24° 158 9° 35° 364 20° 88 5° 40° 466 25° 176 10° 36° 384 21° 104 6° 41° 488 26° 194 11° 37° 404 22° 123 7° 42° 510 27° 213 12° 38° 425 23° 8° 141 43° 28° 532 231 13° 39° 445 158 24° 9° 554 44° 29° 249 14° 40° 25° 466 176 10° 45° 577 30° 268 15° 488 41° 26° 11° 194 42° 510 213 27° 12° 43° 28° 532 231 13° SPRINGS 554 44° 29° 249 14° Number of version: 20.000. manoeuvres) 577 10.000 to 3.000 45° 30° (over PH 3.000; from 268 15°manoeuvres for standard

Heavy usage supplement available on request: 25.000 - 50.000 - 100.000, only after technical office check. SPRINGS Number of manoeuvres for standard version: 20.000. (over PH 3.000; from 10.000 to 3.000 manoeuvres) Heavy usage supplement available on request: 25.000 - 50.000 - 100.000, only after technical office check.

36

h h (mm) 600 625 650 675 h (mm) 700 600 726 625 754 650 780 675 810 700 840 726 868 754 900 780 932 810 965 840 1000 868 900 932 965 1000


1300 780 450

Docks

Product Range > Doors Panel Lift Door

Intro 4

Leda

Large Doors 8

HLIL - HIGH INCLINED LIFTING

HA PH

B

HL IL

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103

B'

Barriers 106 Ramp 107 G

Structures 108

HA

Îą

B - B'

Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

CEILING FIXING BRACKET

A

A'

SS

PL

150

150x50x2 COMPENSATION COLUMN

2

50

PH

A - A'

SD

OUT FROM DOORWAY

INDOOR WAY

70

For PL > 4000 and dark colours, verify fitting spacers as per page 43

Sectinal doors technical data sheet

- 41 -

24/10/11

DITEC S.p.A

37


Product Range > Doors FITTING WITH TUBOLAR PIPE SPACER Spacing accessories to be used on doors

Panel Lift Door

HA

with PL > 4000 and standard colours PH RAL 8014, RAL 6005 e RAL 5010, and on all dark no-standard colours.

Leda

HA

HL

PH

HA

VL

PH

FITTING WITH PIPE SPACER Spacing accessories to be used on doors with PL > 4000 and standard colours RAL 8014, RAL 6005 e RAL 5010, and on all dark no-standard colours .

LAR PIPE SPACER

HA

HA

PH

HL

HA

PH

VL

PH

HL IL

used on doors with PL > 4000 and , RAL 6005 e RAL 5010, and on all dark 100

150

50

150

Cod.S4560B25

PH + HA

PH

Cod.S4560B25

PL

PH PL

Closing Closing detaildetail 38 Sectinal doors technical data sheet

- 43 -

24/10/11

DITEC S.p.A

HL IL


1300 780 450

Docks

Product Range > Doors Panel Lift Door Only for blind curtains with no portholes or doors

Intro 4

Leda

Large Doors 8

CURTAIN CURTAIN WEIGHTS WEIGHTS TABLE (Kg)TABLE (kg) Only for blind curtains with no portholes or doors PH / PL

1750

2000

2250

2500

2750

3000

3250

3500

3750

4000

4250

4500

4750

1560

46

51

56

61

66

71

75

80

85

90

95

100

105

1670

48

53

58

64

69

74

79

84

89

94

100

105

110

1780

50

56

61

67

72

77

83

88

93

99

104

110

115

1890

52

58

64

69

75

81

86

92

98

103

109

115

120

2060

59

65

72

78

85

91

97

104

110

117

123

130

136

2170

61

68

74

81

88

94

101

108

114

121

127

134

141

2280

63

70

77

84

91

98

104

112

118

125

132

139

146

2390

65

72

79

87

94

101

108

116

123

130

137

144

151

2500

67

75

82

90

97

104

112

119

127

134

141

149

156

2560

72

80

88

96

104

111

119

128

135

143

151

159

167

2670

74

82

90

99

107

115

123

131

139

147

155

164

172

2780

76

84

93

102

110

118

126

135

143

152

160

169

177

2890

78

87

95

104

113

121

130

139

148

156

165

174

182

3000

80

89

98

107

116

125

134

143

152

160

169

179

187

3110

82

91

100

110

119

128

137

147

156

165

174

183

192

3280

89

99

109

119

129

139

148

159

168

178

188

198

208

3390

91

101

111

122

132

142

152

163

173

183

193

203

213

3500

93

103

114

125

135

145

155

166

177

187

197

208

218

3610

95

106

116

127

138

149

159

170

181

191

202

213

224

3720

97

108

119

130

141

152

163

174

185

196

206

218

229

3890

104

115

127

139

151

162

174

186

198

209

221

233

244

4000

106

118

130

142

154

166

177

190

202

213

225

238

250

4110

108

120

132

145

157

169

181

194

206

218

230

243

255

4220

110

122

135

148

160

172

185

198

210

222

234

247

260

4330

112

125

137

151

163

176

188

201

214

226

239

252

265

4500

119

132

145

160

173

186

199

213

227

240

253

267

281

4610

121

134

148

162

176

189

203

217

231

244

258

272

286

4720

123

137

151

165

179

193

206

221

235

249

262

277

291

4830

125

139

153

168

182

196

210

225

239

253

267

282

296

4940

127

141

156

171

185

199

214

229

243

257

272

287

301

5110

134

149

164

180

195

210

225

241

256

271

286

302

317

5220

136

151

166

183

198

213

228

245

260

275

290

307

322

5330

138

153

169

185

201

216

232

248

264

279

295

311

327

5440

140

156

171

188

204

220

236

252

268

284

300

316

332

5550

142

158

174

191

207

223

239

256

272

288

304

321

337

5720

149

165

182

200

217

234

250

268

285

302

318

336

353

5830

151

168

185

203

220

237

254

272

289

306

323

341

358

5940

153

170

187

206

223

240

257

276

293

310

328

346

363

6050

155

172

190

209

226

244

261

280

297

315

332

351

368

6160

157

175

192

211

229

247

265

284

301

319

337

356

373

6330

164

182

201

220

239

257

276

296

314

332

351

371

389

6440

166

184

203

223

242

261

279

299

318

337

355

376

394

6550

168

187

206

226

245

264

283

303

322

341

360

380

399

6660

170

189

208

229

248

267

286

307

326

345

365

385

404

6770

172

191

211

232

251

271

290

311

330

350

369

390

410

6940

177

197

217

239

259

279

299

321

341

361

382

403

423

7000

178

198

218

240

260

280

300

322

342

362

383

404

424

Sectinal doors technical data sheet

- 44 -

24/10/11

DITEC S.p.A

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

39


Product Range > Doors Panel Lift Door

Only for blind curtains with no portholes or doors

Leda

CURTAIN WEIGHTS TABLE (Kg) 5000

5250

5500

5750

6000

6250

6500

6750

7000

7250

7500

7750

8000

110

131

137

149

155

160

166

194

201

206

265

273

281

1560

115

137

143

155

161

167

173

202

208

214

273

281

290

1670

120

143

149

161

167

174

180

209

216

222

281

290

298

1780

126

149

155

168

174

180

187

216

223

230

289

298

307

1890

142

173

181

194

202

209

217

255

263

270

348

359

370

2060

148

179

187

200

208

216

224

262

271

278

356

367

378

2170

153

185

193

207

215

223

231

269

278

286

364

375

387

2280

158

190

199

213

221

229

238

276

286

293

372

384

395

2390

164

196

204

219

228

236

245

283

293

301

380

392

404

2500

175

209

218

240

249

258

268

315

325

334

431

445

459

2560

180

215

224

246

255

265

275

322

333

342

439

453

467

2670

185

220

230

252

262

271

282

329

340

350

447

462

476

2780

191

226

236

258

268

278

289

336

348

358

455

470

484

2890 3000

196

232

242

264

275

285

296

344

355

365

463

478

493

202

238

248

271

281

292

303

351

363

373

471

486

501

3110

218

262

274

297

309

320

333

389

403

414

531

547

564

3280

223

268

280

304

315

327

339

396

410

421

539

556

573

3390

229

273

286

310

322

334

346

404

417

429

547

564

581

3500

234

279

292

316

328

340

353

411

425

437

555

572

590

3610

239

285

297

322

335

347

360

418

432

445

563

580

598

3720

256

304

317

349

362

376

390

456

472

485

622

641

661

3890 4000

261

309

323

355

369

383

397

464

480

493

630

650

670

267

315

329

361

375

389

404

471

487

501

638

658

678

4110

272

321

335

368

382

396

411

478

495

508

646

666

687

4220

277

326

341

374

388

403

418

485

502

516

654

674

695

4330

294

351

367

400

416

432

448

524

542

557

713

736

758

4500 4610

299

357

373

407

422

438

455

531

549

565

721

744

767

305

362

379

413

429

445

462

538

557

573

729

752

775

4720

310

368

384

419

435

452

469

545

564

580

737

761

784

4830

315

374

390

425

442

458

476

553

572

588

745

769

792

4940

332

393

410

452

470

487

506

591

611

629

804

830

855

5110

337

398

416

458

476

494

513

598

619

636

812

838

864

5220

342

404

422

464

482

501

520

606

626

644

820

846

872

5330

348

410

428

471

489

507

527

613

634

652

828

855

881

5440

353

415

434

477

495

514

534

620

641

660

836

863

889

5550

370

440

460

504

523

543

564

658

681

700

896

924

952

5720

375

446

466

510

530

549

571

666

689

708

904

932

961

5830

380

451

472

516

536

556

578

673

696

716

912

941

969

5940

386

457

477

522

543

563

585

680

704

723

920

949

978

6050

391

463

483

528

549

570

592

687

711

731

928

957

986

6160

408

482

503

555

577

598

621

726

751

772

987

1018

1050

6330

413

487

509

561

583

605

628

733

758

780

995

1027

1058

6440

418

493

515

568

590

612

635

740

766

788

1003

1035

1067

6550

424

499

521

574

596

618

642

747

773

795

1011

1043

1075

6660

429

504

527

580

603

625

649

755

781

803

1019

1051

1084

6770

444

525

548

602

626

650

675

789

816

843

1078

1112

1146

6940

445

526

549

603

627

651

676

790

817

844

1079

1113

1147

7000

Sectinal doors technical data sheet

40

PH / PL

- 45 -

24/10/11

DITEC S.p.A


1300 780 450

Docks

Product Range > Doors Panel Lift Door Gold Alu GoldGlazed Alu Doors

Light and pleasant environments Maximum internal/external visibility Maximum safety attractive frame with Modern acrylic,and glass, mesh, grille panels

Intro 4

Extruded section Extruded aluminium aluminium section Extruded section with acrylic, glass, mesh, grille panels with aluminium acrylic, glass, mesh, grille panels

Large Doors 8 Panel Lift

Main Features Panels with side anodized or painted extruded aluminium surroundHigh Speed Main Features Main Features

15

62 profiles,with available in different types ofextruded material:aluminium acrylic, unbreakable Panels side anodized or painted surround ■ Pglass, anelswire withmesh side anodized or painted extruded aluminium profiles, available in different types of material: acrylic, unbreakable PVC 81 surround profiles, in different types of material: Panels aesthetically / functionally matched. glass, wire mesh available DockBrain 86 acrylic, unbreakable glass, wire mesh Panels aesthetically / functionally matched.

■ Panels aesthetically / functionally matched.

Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103

Insulated panel matching table - Gold Alu panels (RAL matched colours)

Insulated Section Gold Alu Section colours) Insulatedpanel panelmatching matching table - Glazed Doors matched Insulated table - Gold Alu panels (RAL panels matched(RAL colours) Insulated Section Insulated Section Embossed similar to RAL 9010E Embossed similar to RAL 9010E

Internal side Same as external side Internal side Same as external side External side

Glazed Doors Section Gold Alu Section

White Streaked similar to RAL 9010W White External Side External side Silver Streaked similar to RAL 9006W Anodized aluminium White Streaked similar to RAL 9010W White Green Streaked similar to RAL 6005W Green Silver Streaked similar to RAL 9006W Anodized aluminium Dark brown Streaked similar to RAL 8014W Dark brown Green Streaked similar to RAL 6005W Green Dark Streaked RAL 8014W Dark brown Note:brown For non standard paint on internalsimilar side oftothermally insulated panels see VERI code on page 36

similar to RAL 9010 Natural colour similar to RAL 9010 similar to RAL 6005 Natural colour simil to RAL 8014 similar to RAL 6005 simil to RAL 8014

Clear acrylic single wall panel - 3 mm

Clear acrylic single wall panel - 3 mm Clear acrylic single wall panel - 3 mm Clear acrylic single wall panel - 3 mm Acrylic-double glazing panel - 3+9+3 mm Acrylic-double glazing panel - 3+9+3 mm Clear unbreakable glass - 3+3 mm Clear unbreakable glass - 3+3 mm Clear unbreakable glass - 3+3 mm Clear unbreakable glass - 3+3 mm * Painted stretched meshing - 28x10 sp. 1.5 mm (Air grille approx. 60% of total area) * Painted stretched meshing - 28x10 sp. 1.5 mm (Air grille approx. 60% of total area)

Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113

Note: For non standard paint on internal side of thermally insulated panels see VERI code on page 36

Panels Codes are per row or panel Panels

Ramp 107

Code Index PL (mm) < 4000

PL (mm) < 5000

PL (mm) < 6000

PL (mm) < 7000

PL (mm) < 4000 SMXGAM40T 523,00 € SMXGAM40T 523,00 €

PL (mm) < 5000 SMXGAM50T 682,00 € SMXGAM50T 682,00 €

PL (mm) < 6000 SMXGAM60T 841,00 € SMXGAM60T 841,00 €

PL (mm) < 7000 SMXGAM70T 1000,00 € SMXGAM70T 1000,00 €

SMXGAM40S 535,00 € SMXGAM40S 535,00 €

SMXGAM50S 694,00 € SMXGAM50S 694,00 €

SMXGAM60S 853,00 € SMXGAM60S 853,00 €

SMXGAM70S 1012,00 € SMXGAM70S 1012,00 €

SMXGAM40C 762,00 € SMXGAM40C 762,00 €

SMXGAM50C 1000,00 SMXGAM50C 1000,00

SMXGAV40T 648,00 € SMXGAV40T 648,00 €

SMXGAV50T 853,00 € SMXGAV50T 853,00 €

SMXGAV40S 773,00 € SMXGAV40S 773,00 €

SMXGAV50S 989,00 € SMXGAV50S 989,00 €

SMXGAR40V SMXGAR50V SMXGAR60V SMXGAR70V 523,00 € 682,00 € 841,00 € 1000,00 € SMXGAR40V SMXGAR50V SMXGAR60V SMXGAR70V 523,00 € 682,00 € 841,00 € 1000,00 € * Rhomboid links, electrically-galvanised steel drawn mesh: with natural colour oxidised Gold Alu panel, the mesh is painted in the standard * RAL Rhomboid links, electrically-galvanised steel drawn mesh: with natural colour oxidised Glazed Doors 9006 colour whilst, in the case of painted panels, the mesh is painted in the same RAL colour as the Gold Alu panel. *panel, Rhomboidthe links, electrically-galvanised mesh: with natural colour oxidisedwhilst, Gold Aluin panel, mesh of is painted in thepanels, standard mesh is painted insteel thedrawn standard RAL 9006 colour thethe case painted RAL 9006 colour whilst, in the case of painted panels, the mesh is painted in the same RAL colour as the Gold Alu panel.

the mesh is painted in the same RAL colour as the Glazed Doors panel.

echnical data shown in thisinPrice List are not binding. For more details, The technical data shown this Price List are not binding. For more details, to theto relevant leaflets and Technical manuals, also available from the website: www.ditecentrematic.com refer the relevant leaflets and Technical manuals, also available from the website: www.ditecentrematic.com

Internal Side White Internal Side White External Side

Barriers 106

41


Mantle with partial number of sections

Mantle completely in extruded aluminium sections

Panel positions from below

Panel positions from below

PH 1 Range 2 3 > 4Doors 5 Product 1780

610 GA/500

610

1890

610 GA/610

610

6

7

8

9

1

2

3

4

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

6

7

8

9

NOTE: GA GA GA GA The possibility of a partial number alu sections, GA GA GA GA including either the lower or the upper panel is also foreseen; GAare GA in that case the referenceGA limits theGA same of the mantle completely in aluminium (insulated panels GA GA GA GA dimension match the standard mantle composition). GA GA GA GA

2060 500 GA/500 GA/500 Panel Lift Door

500

2170

500 GA/500 GA/500

610

2280

610 GA/500 GA/500

Leda

610

2500

610 GA/610 GA/610

610

2560

500 GA/500 GA/500 GA/500

2390 Glazed 610 GA/610 GA/500 Panel Doors610

GOLD ALU Glazed Panel GA/500 Doors GA/500 2670 500 GA/500

500 610

Mantle with partial number of sections

Mantle completely in extruded aluminium sections

Panel positions from below

Panel positions from below

2780

610 GA/500 GA/500 GA/500

610

2890

610 GA/610 GA/500 PH 1 2 GA/500 3

610 4

3000

610 GA/610 GA/610 GA/500 1780 610 GA/500 610

610

3110

1890 610 GA/610 610 610 GA/610 GA/610 GA/610

5

6

7

8

9

GA

GA

GA

GA

GA

GA 1

2GA 3 GA 4

GA5

GA 6

GA GA GA GAGA GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

610

GA GA GA GA GAGA

2060

500 GA/500 GA/500

500

GA

GA

GA

GA

2170

500 GA/500 GA/500

610

GA

GA

GA

GA

3170

500 GA/500 GA/500 GA/500 GA/500

610

3280

610

3390

610 GA/500 GA/500 GA/500 GA/500 2280 610 GA/500 GA/500 610 610 GA/610 GA/500 GA/500 2390 610 GA/610 GA/500 GA/500 610

610

GA GA GA GAGAGA GA GA GA GA GAGAGA GA GA

3500

2500 610 GA/610 GA/610 GA/500 610 610 GA/610 GA/610 GA/500

610

GA GA GA GA GAGAGA

3610

610 GA/610 GA/610 GA/610 GA/500

3720

610 GA/610 GA/610 GA/610 GA/610

3780

610 GA/500 GA/500 GA/500 2890 610 GA/610 GA/500 GA/500 GA/500 GA/500 610

610

3890

3000 610 GA/610 GA/610 GA/500 GA/500 GA/500 610 610 GA/610 GA/500 GA/500

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA GA GA GAGAGA GA

GA GA GA

GA

GA

610

GA GA GA GA GAGAGA

GA GA GA

GA

GA

610

GA

GA

GA

GA

500

2670

500 GA/500 GA/500 GA/500

610

GA

GA

GA

GA

2780

610 GA/500 GA/500 GA/500

610

GA

GA

GA

GA

GA

610

GA

610

GA

GA

GA

GA

GA

GA

3110

610 GA/610 GA/610 GA/610

3170

500 GA/500 GA/500 GA/500 GA/500

610

GA

GA

GA

GA

3280

610 GA/500 GA/500 GA/500 GA/500

610

GA

GA

GA

GA

610

8

GA

500 GA/500 GA/500 GA/500

610 GA/610 GA/610 GA/500 GA/500 GA/500

4110

610 GA/610 GA/610 GA/610 GA/500 GA/500

4220

610 GA/610 GA/610 GA/610 GA/500 610610 3390 610 GA/610 GA/500 GA/610 GA/500 GA/500

4330

3500 610 GA/610 GA/610 GA/610 GA/500 GA/500 GA/610 GA/610 GA/610 GA/610 610610

GA

610

3610

610 GA/610 GA/610 GA/610 GA/500

610

3720

610 GA/610 GA/610 GA/610 GA/610

610

3780

610 GA/500 GA/500 GA/500 GA/500 GA/500

4390

610 GA/500 GA/500 GA/500 GA/500 GA/500 GA/500

610

4500

610 GA/610 GA/610 GA/500 GA/500 GA/500 GA/500

610

4610

610 GA/610 GA/610 GA/610 GA/500 GA/500 3890 610 GA/610 GA/500 GA/500 GA/500 GA/500 GA/500 610 610

4720

4000 610 GA/610 GA/610 GA/610 GA/500 GA/500 GA/500 610 610 610 GA/610 GA/610 GA/610 GA/500 GA/500

610

4110

610 GA/610 GA/610 GA/610 GA/500 GA/500

610

4220

610 GA/610 GA/610 GA/610 GA/610 GA/500

610

4330

610 GA/610 GA/610 GA/610 GA/610 GA/610

610

610

4940

610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/610

610

5000

610 GA/610 GA/610 GA/500 GA/500 GA/500 GA/500 4390 610 GA/500 GA/500 GA/500 GA/500 GA/500 GA/500 GA/500 610 610

5110

4500 610 GA/610 GA/610 GA/500 GA/500 GA/500 GA/500 GA/500 610 610 610 GA/610 GA/610 GA/610 GA/500 GA/500 GA/500

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA GA GA GAGAGA GA

GA GA GA GA

GA

GA

GA GA GA GA GAGAGA

GA GA

GA GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/500

GA

GA

GA

GA

4830

GA

GA

GA

GA

GA

7

GA

2560

4000

610

5

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

9

GA

GA

GA

GA

GA GA GA GAGAGA GA GA GA GA GA GA GA

GA

GA

GA GA GA GA GAGAGA

GA

GA

GA

GA

GA

GA

GA

GA

GA GA GA GAGAGA GA

GA GA GA GA GA GA GA GA

GA

GA

GA GA GA GA GAGAGA

GA GA GA GA GA GA GA GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA GA GA GA GA GA GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

4610

610 GA/610 GA/610 GA/610 GA/500 GA/500 GA/500

610

GA

GA

GA

GA

4720

610 GA/610 GA/610 GA/610 GA/610 GA/500 GA/500

610

GA

GA

GA

GA

4830

610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/500

610

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

5220

610 GA/610 GA/610 GA/610 GA/610 GA/500 GA/500 GA/500 610

5330

610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/500 GA/500 610

5440

610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/500 4940 610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/610 610 610

GA GA GA GAGAGA GA

GA GA GA GA GA GA GA GA

GA

GA

5550

5000 610 GA/610 GA/610 GA/610 GA/500 GA/500 GA/500 GA/500 GA/500610 610 610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/610

GA GA GA GA GAGAGA

GA GA GA GA GA GA GA GA GAGA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

GA

5110

610 GA/610 GA/610 GA/610 GA/500 GA/500 GA/500 GA/500 610

GA

GA

GA

GA

GA

GA

GA

GA

GA

5220

610 GA/610 GA/610 GA/610 GA/610 GA/500 GA/500 GA/500 610

GA

GA

GA

GA

GA

GA

GA

GA

GA

5440

610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/500 610

GA

GA

GA

GA

GA

GA

GA

GA

GA

5550

610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/610 GA/610 610

GA

GA

GA

GA

GA

GA

GA

GA

GA

NOTE: The possibility of a partial number alu sections, including either the lower or the upper panel is also foreseen; in that case the refe5330same 610ofGA/610 GA/610 GA/610 GA/610 GA/610 GA/500 GA/500 610 dimension GA GA GA the GAstandard GA GAmantle GA composition). GA GA rence limits are the the mantle completely in aluminium (insulated panels match

NOTE: The possibility of a partial number alu sections, including either the lower or the upper panel is also foreseen; in that case the reference limits are the same of the mantle completely in aluminium (insulated panels dimension match the standard mantle composition).

Leggenda Legend

GA/500 GA/610 GA

Alu panel with same H or 500mm insulated Alu panel with same H or 610mm insulated Alu panel with same H

500 600 Leggenda

GA/500 data sheet Alu panel with same H or 500mm insulated Sectinal doors technical -

42

GA/610 GA

Alu panel with same H or 610mm insulated Alu panel with same H

Sectinal doors technical data sheet

500mm insulated panel 610mm insulated panel

8-8-

500 600

500mm insulated panel 24/10/11 610mm insulated panel

24/10/11

DITEC S.p.A

DITEC S.p.A


1300 780 450

Docks

Product Range > Doors Panel Lift Door SINGLE SIDE HINGE (PL<=5500)

65

15

Glazed Panel Doors

center

40

15

center

150

78

PRE PAINTED ANTI-SCRATCH ZINC-COATED STEEL SIDE CASING WHITE RAL 9003

SEAL BETWEEN PANELS

Intro 4

65

37 57

DOUBLE SIDE HINGE (PL>5500)

37 57

Leda

INTERMEDIATE HINGE (DRILLED PANEL STEP =1300 mm CA)

Large Doors 8 Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95

L 100

(*) PL > 7300 = 110

OMEGA REINFORCING PROFILE

66 (*)

60

500 528

L

SIDE HINGE ON DRILLED SIDE CASINGS (NON-DRILLED PANEL)

VIEW EXTERNAL VIEW Mantle completely inINTERNAL extruded aluminium sections

H

610 638

Mantle with partial number of sections

Drawbridge 99 Seals 103 Barriers 106 Ramp 107

35

75

Structures 108

123

SEAL WIT SINGLE GLAZING

Shelters 109

57

Scissor Lift 110

> 5500 PL ≤ 6500

Freight Hoists 113

PH

PH

Reinforcing profile positioning Omega reinforcing profile positioning PL > 6500

With pedestrian door

Code Index

One on each panel

Two on each panel

Two reinpreing profiles

FULL PANEL FLAT

FULL PANEL FLAT External side White

PLsimil RAL 9010S flat smooth

Internal side

Sectinal doors technical data sheet -5Mantle withpartial partial number number of Mantle with ofsections sections Limit for typology of sections and paneling - Positioning reinforcing Limit for typology of sections and paneling – Positioning “omega” reinforcing profiles profiles

PL

n° sez.

Profile type Reinforcing type

≤3

No reinforcement

≤7

1 alu omega per panel

≤3

1 alu omega per panel

≤7

1 alu omega + tubular per panel

≤7000 ≤ 7

1 alu omega + tubular per panel

≤3000

≤5000

PL

simil RAL 9010E staved embossed

White

L* Acrylic Acrylic Acrylic 3+3 4 mm 3 mm/ double Glass Net glazing ≤ 1000 ≤ 3000 ≤ 1500 ≤ 1000 ≤ 750

24/10/11

DITEC S.p.A

Mantle completely sections Mantle completelyininextruded extruded aluminium aluminium sections Limit for and paneling - Positioning reinforcingprofiles profiles -Limit fortypology typologyofofsections sections - Positioning “omega” reinforcing Availableglazing glazingand andwidth widthlimits limits (L) Available (L) L* PL Profile type Reinforcing type Acrylic Acrylic Acrylic 3+3 4 mm 3 mm/ double Glass Net glazing ≤3000

1 alu omega per panel

1 alu omega + tubular per panel ≤5000 + 1 steel 65 mm omega on lower and upper panels profiles

≤ 1000 ≤ 3000 ≤ 1500 ≤ 1000

1 alu omega + tubular per panel ≤7000 + 1 steel 65 mm omega on lower and upper panels profiles

* It saves the possibility to force a number glazing greater than the one optimized with limit L, but for acrilic glazing 4 Mantle with partial number of sections Centrally built-in pedestrian door

≤ 750

Mantle completely in extruded aluminium sections Centrally built-in pedestrian door

43


Product Range > Doors Panel Lift Door

Leda

Glazed Panel Doors - panel details See table p. 9

SECTION A-A '

71

119

A 56

56

X

B

B'

71

X + 36

X = 500 รท 610

A'

71

SECTION C-C'

119

TOP PROFILE

119

SECTION B-B'

71

ACRYLIC PLATE 3 mm LAMINATED GLASS 3+3

SECTION D-D' Aluminium reinforcing profile

Double side hinge

Steel reinforcing profile 66

ACRYLIC DOUBLE GLAZING 119

85

150

35

BOTTOM PROFILE

Pedestrian door inserted

C

=

=

=

=

C'

=

=

PH

=

=

=

D

PL

D'

44

External view

Sectinal doors technical data sheet

Internal view

- 11 -

24/10/11

DITEC S.p.A


1300 780 450

Docks

Product Range > Doors Panel Lift Door

Leda

Intro 4

OBLÒPortals e GRID Panel Doors

Cassette panels Large Doors 8

Staved panels

260 325

OBO1B - Black acrylic porthole OBO1W - White acrylic porthole

PL

N°max

1800 ÷ 2070 2070 ÷ 2700 2700 ÷ 3340 3340 ÷ 3970 3970 ÷ 4600 4600 ÷ 5240 5240 ÷ 8000

2 3 4 5 6 7 8

1800 ÷ 2070 2070 ÷ 2700 2700 ÷ 3340 3340 ÷ 3970 3970 ÷ 4600 4600 ÷ 5240 5240 ÷ 8000

2 3 4 5 6 7 8

1800 ÷ 2070 2070 ÷ 2700 2700 ÷ 3340 3340 ÷ 3970 3970 ÷ 4600 4600 ÷ 5240 5240 ÷ 8000

2 3 4 5 6 7 8

1800 ÷ 2070 2070 ÷ 2700 2700 ÷ 3340 3340 ÷ 3970 3970 ÷ 4600 4600 ÷ 5240 5240 ÷ 8000

2 3 4 5 6 7 8

1800 ÷ 2700 2700 ÷ 3340 3340 ÷=3970 3970 ÷ 4600 4600 ÷ 5240 5240 ÷ 8000

2 4 4 6 6 8

425 490

260 325

OBO1BS - Black satin finish acrylic porthole OBO1WS - White satin finish acrylic porthole

425 490

260 325

OBO1BIC - Black acrylic porthole with crossed glazing bars OBO1WIC - White acrylic porthole with crossed glazing bars

425 490

260 325

OBO1BR - Black porthole with black stretched rhomboidal mesh OBO1WR - White porthole with black stretched rhomboidal mesh

425 490

OBO1WRS2 - White acrylic porthole with radial glazing bars, 2 pcs Staved Panels Staved Panels

=

=

=

=

260 325

=

425 490

425 490

= 4 pcs OBO1WRS4 - White acrylic porthole with radial glazing bars,

=

2700 ÷ 3340 3340 ÷ 3970 3970 ÷ 4600 4600 ÷ 5240 5240 ÷ 8000

=

=

4 4 4 4 8

=

2610 ÷ 2800 2830 ÷ 3200 3250 ÷ 3500 3590 ÷ 5000

=

= =

45 425 490

425 490

4 4 4 4

260 325

=

PL N°max 2000 ÷ 2165 1 15 Panel Lift 2170 ÷ 2500 3 2505 ÷ 2605 2 2610 ÷ 2800 High Speed 4 62 2805 ÷ 2825 2 2830 ÷ 3200 4 PVC 81 3205 ÷ 3245 3 3250 ÷ 3500 5 3505 ÷ 3585 3 DockBrain 86 3590 ÷ 4000 5 4005 ÷ 4095 4 4100 ÷ 4600 6 Dock Intro 92 4605 ÷ 4705 5 7 4710 ÷ 5000 1 2000 ÷ 2165 Leveller 95 3 2170 ÷ 2500 2 2505 ÷ 2605 4 2610 ÷ 2800 Drawbridge 99 2 2805 ÷ 2825 4 2830 ÷ 3200 3 3205 ÷ 3245 Seals 103 5 3250 ÷ 3500 3 3505 ÷ 3585 5 3590 ÷ 4000 Barriers 106 4 4005 ÷ 4095 6 4100 ÷ 4600 5 4605 ÷ 4705 Ramp 107 7 4710 ÷ 5000 1 2000 ÷ 2165 Structures 108 3 2170 ÷ 2500 2 2505 ÷ 2605 4 2610 ÷ 2800 Shelters 109 2 2805 ÷ 2825 4 2830 ÷ 3200 3 3205 ÷ 3245 Scissor Lift 110 5 3250 ÷ 3500 3 3505 ÷ 3585 5 3590 ÷ 4000 Freight Hoists 113 4 4005 ÷ 4095 6 4100 ÷ 4600 4605 ÷ 4705 Code Index 5 7 4710 ÷ 5000 1 2000 ÷ 2165 3 2170 ÷ 2500 2 2505 ÷ 2605 4 2610 ÷ 2800 2 2805 ÷ 2825 4 2830 ÷ 3200 3 3205 ÷ 3245 5 3250 ÷ 3500 3 3505 ÷ 3585 5 3590 ÷ 4000 4 4005 ÷ 4095 6 4100 ÷ 4600 5 4605 ÷ 4705 7 4710 ÷ 5000 2 2170 ÷ 2605 4 2610 ÷ 2800 2 2805 ÷ 2825 4 2830 ÷ 3200 2 3205 ÷ 3245 4 = 3250 ÷ 3500 2 3505 ÷ 3585 4 3590 ÷ 4000 4 4005 ÷ 4095 6 4100 ÷ 4600 4 4605 ÷ 4705 6 4710 ÷ 5000

425 490

425 490


Product Range > Doors Panel Lift Door

Leda

Panel Doors Portals

• On the last panel portholes are applicable in base on the eventual panel’s height cutting • Over PL5500 portholes are applicable only on panel 610 mm tall • In case of grille on 1st panel, holes for fixing release handle are not drilled Pannello a doghe

297 373

OBO2B - Black rectangular window in acrylic double glazing

604 680

267 343

OBO3B - Black oval porthole in acrylic double glazing

587 663

83 145

OBO4B - Black rectangular window in acrylic double glazing

548 610

272 360

WIB1 - Aluminum black lacquered window with acrylic double glazing WIW1 - Aluminum white lacquered window with acrylic double glazing

80

GRI1B - Ventilation grid en black PVC GRI1W - Ventilation grid en white PVC

90

437 525

449 480

46

PL

N°max

1800 ÷ 2640 2640 ÷ 3460 3460 ÷ 4290 4290 ÷ 5000 5000 ÷ 5500 5500 ÷ 8000

2 3 4 5 5 5

1800 ÷ 2590 2590 ÷ 3400 3400 ÷ 4200 4200 ÷ 5000 5000 ÷ 5500 5500 ÷ 8000

2 3 4 5 5 5

1800 ÷ 2430 2430 ÷ 3180 3180 ÷ 3940 3940 ÷ 8000

2 3 4 5

1800 ÷ 2180 2180 ÷ 2840 2840 ÷ 3510 3510 ÷ 4180 4180 ÷ 5000 5000 ÷ 5500 5500 ÷ 8000

1800 ÷ 1980 1980 ÷ 2580 2580 ÷ 3190 3190 ÷ 3790 3790 ÷ 8000

Pannello a cassette PL

N°max

2 3 4 5 6 6 6

2000 ÷ 2165 2170 ÷ 2500 2505 ÷ 2605 2610 ÷ 2800 2805 ÷ 2825 2830 ÷ 3200 3205 ÷ 3245 3250 ÷ 3500 3505 ÷ 3585 3590 ÷ 4000 4005 ÷ 4095 4100 ÷ 4600 4605 ÷ 4705 4710 ÷ 5000

1 3 2 4 2 4 3 5 3 5 4 6 5 7

2 3 4 5 6

2000 ÷ 2165 2170 ÷ 2500 2505 ÷ 2605 2610 ÷ 2800 2805 ÷ 2825 2830 ÷ 3200 3205 ÷ 3245 3250 ÷ 3500 3505 ÷ 3585 3590 ÷ 4000 4005 ÷ 4095 4100 ÷ 4600 4605 ÷ 4705 4710 ÷ 5000

1 3 2 4 2 4 3 5 3 5 4 6 5 7


1300 780 450

Docks

Product Range > Doors Panel Lift Door

Intro 4

Leda

ModelPanel Portals Supplemental Fill-in Glazed

Illuminating surfaces

OBO1B Model

Acrylic plate with double glazing Fill-in

1100 cm2 Illuminating surfaces

OBO1W

Acrylic plate with double glazing

1100 cm2

OBO1B

Acrylic plate with double glazing

1100 cm2

OBO1BS

Satin finish double acrylic sheet

550 cm2

OBO1W

Acrylic plate with double glazing

1100 cm2

OBO1WS

Satin finish double acrylic sheet

550 cm2

OBO1BS

Satin finish double acrylic sheet Double acrylic sheet with crossed glazing bars Satin finish double acrylic sheet Double acrylic sheet with crossed glazing bars Double acrylic sheet with crossed glazing bars Double acrylic sheet with radial glazing bars Double acrylic sheet with crossed glazing bars Double acrylic sheet with radial glazing bars Double acrylic sheet with radial glazing bars Acrylic plate with double glazing Double acrylic sheet with radial glazing bars Acrylic plate with double glazing

550 cm2

OBO1BIC OBO1WS OBO1WIC OBO1BIC OBO1WRS2 OBO1WIC OBO1WRS4 OBO1WRS2 OBO2B OBO1WRS4 OBO3B

950

Fastening Trip

Screw

Fastening• Trip

Screw •

• •

• •

550 cm2

950 cm2

cm2

550 cm2 550

cm2

1490 cm2

• •

OBO3B

Acrylic plate with double glazing

1490 cm2

WIW1

Acrylic double glazing

1180 cm2

OBO4B

Acrylic plate with double glazing

450 cm2

WIB1

Acrylic double glazing

1180 cm2

WIW1

Acrylic double glazing

1180

cm2

WIB1

Acrylic double glazing

1180 cm2

Model

Fill-in

Illuminating surfaces

OBO1BR Model

Black stretched rhomboidal mesh Fill-in

760 cm2 Illuminating surfaces

OBO1WR

Black stretched rhomboidal mesh

760 cm2

OBO1BR

Black stretched rhomboidal mesh

760 cm2

GRI1W

Ventilation grid

250 cm2

OBO1WR

Black stretched rhomboidal mesh

760 cm2

GRI1B

Ventilation grid

250 cm2

GRI1W

Ventilation grid

250 cm2

GRI1B

Ventilation grid

250 cm2

• • •

Fastening Trip

Screw

Fastening• Trip

Screw •

Ramp 107 Structures 108 Shelters 109 Scissor Lift 110

• •

Freight Hoists 113

Code Index

• •

• •

Frame colour

Frame material

White

Black

• Frame colour White •

• •

Barriers 106

Seals 103

Drawbridge 99

1790

450 cm2

62

Acrylic plate with double glazing Acrylic plate with double glazing

High Speed

Leveller 95

15

Dock Intro 92

• •

Panel Lift

DockBrain 86

Large Doors 8

PVC 81

OBO2B

Aluminium

• •

OBO4B

cm2

• •

Aluminium

• Frame material

• •

Plastic

Plastic •

950 cm2

Frame material

Black

950 cm2

1790

White •

• •

Black

• Frame colour

cm2

cm2

White

550 cm2

550

Frame colour

Black

Plastic

Aluminium

Frame material Plastic

Aluminium

• •

• •

• •

47


Product Range > Doors Panel Lift Door

Leda

Panel Door Motors Technical specifications Description:

Motorised version*

Electromechanical actuator

LPDM DOD 14 PS

Duty class Intermittent operation

Automatic version

LPDM DOD 14

Three-phase automatic version

LPDM DOD 15

4 - heavy duty

4 - heavy duty

4 - heavy duty

S2 = 30 min / S3 = 50%

S2 = 30 min / S3 = 50%

S2 = 30 min / S3 = 50%

230 V~ / 50 Hz

230 V~ / 50 Hz

400 V~ / 50 Hz

class 1

class 1

class 1

3A

3A

1,2 A

60 Nm

60 Nm

65 Nm

Power supply Insulation class Input Torque / Thrust Drive shaft rpm

22 RPM

22 RPM

32 RPM

by cable / handle type

by cable / handle type

by cable / handle type

-20°C / +55°C

-20°C / +55°C (-35°C / +55°C con NIO attivato)

-20°C / +55°C

IP 54

IP 54

IP 54

Product dimensions

135x264x350

135x264x350

135x264x350

Open-close control

pre-wired switch E1A

E1T

Automatic version

Three-phase automatic version

Release for manual opening Operating temperature Protection rating

Control panel *Hold-to-run operation only

System functions Description: Electronic panel Type of use

E1T

for 1 motor 230 V~ built-in radio

for 1 three-phase motor 400 V~ (multifunction)

400 V~ / 50 Hz

Mains power supply

230 V~ / 50 Hz

Motor power supply

230 V~ / 5 A

400 V~ / 6 A

Accessories power supply

24 V= / 0.5 A

24 V= / 0.5 A

230 V

24 V

limit switch

limit switch

Flashing light gives 3 seconds warning before automatically closing the gate Gate open warning light warns the user if gate is not fully closed Courtesy light Limit switch provision Force adjustment control

 

transformer

ODS - Obstruction detection system causes the gate to stop or reverses operation when an obstruction is detected

Operation time adjustment

Open control

 (with dip-switch)

 (with dip-switch)

Partly open control

 (with radio only)

Close control

Automatic timed close control

Inching control

Hold-to-run control

Stop safety device

Reverse operation safety device

Safety Test facility

NIO - The antifreeze system ensures full motor efficiency even at very low temperatures Operating temperature Protection rating Product dimensions (mm)

48

E1A

 -20°C / +55°C (-35°C / +55°C with NIO enabled)

-20°C / +55°C

IP 55

IP 55

187x261x105

238x357x120

Automatic Industrial Overhead Doors

11


2280 2390

1300 2500

780 450

Docks

2560 Product Range > Doors 2670 2780 2890

Panel Lift Door

3000 3110 3280

LPDM DOD

Intro 4

Leda

Panel Door Motors Globe 7

Globe 10

14 - 15

Manuale

LSDR LSAR

LSD LSA 5

Large Doors 8 Panel Lift

15

High Speed

62

PVC 81

100

DockBrain 86

100

Dock Intro 92 65

Leveller 95

320

Drawbridge 99

27

Seals 103 30

Barriers 106

25.4 (1")

135

65

Ramp 107

264

Structures 108 Shelters 109 Scissor Lift 110

LSD - LSA LSDR - LSAR LSAR + SP3F

Power supply

Absorption

LPDM DOD 14

230 V 50 Hz

3A

DOD 15 LPDM

400 V 50 Hz

1.2 A

Sectinal doors technical data sheet

Torque 60 Nm 75 Nm 65 Nm

- 20 -

Shaft revs 22 RPM 32 RPM

Curtain speed

Protection rating

≤ 0,3 m/s

IP 54

≤ 0,24 m/s ≤ 0,3 m/s

Freight Hoists 113 Code Index

IP 54

24/10/11

DITEC S.p.A

49


Product Range > Doors Panel Lift Door

Leda

Panel Door Motors Powered version (LSD) (LSDR)

Automatic version monophase (LSA) (LSAR)

LPDM DOD 14PS

Automatic version triphase (LSAR + SP3F)

LPDM DOD 14 / E1A

(radio reciver included)

LPDM DOD 15 / E1T

230 V

400 V 3F

10 m

Optional 3 pushbutton unit

Optional 4 pushbutton unit

DSS Safety device by moving photocell (standard on automatic version) Standard threshold

1,5 m

230 V

DOD External vertical powered system LPDM

362

285

420

145

400 min 265

(1)

(1) Version RLO and RLB + 100 mm.

50

Sectinal doors technical data sheet

- 21 -

24/10/11

DITEC S.p.A


1300 780 450

Docks

Product Range > Doors Panel Lift Door

Intro 4

Leda

Large Doors 8

Panel Door Motors LPDM DOD Transmission powered system 145

285

Panel Lift

15

High Speed

62

PVC 81 570

DockBrain 86 Dock Intro 92 Leveller 95

265

Drawbridge 99 Seals 103 Barriers 106 Ramp 107

LPDM DOD Internal vertical powered system (only for lifting VL) 400

Structures 108

410

Shelters 109 350

550

Scissor Lift 110 Freight Hoists 113 Code Index

Horizontal external powered system

395

680

336

140

145

400 min 265

Sectinal doors technical data sheet

- 22 -

24/10/11

DITEC S.p.A

51


Product Range > Doors Panel Lift Door

Leda

Panel Door Motors DOD manual LPDM manualrelease release Therelease release cable cable must by by authorized technicians. The mustbe beused usedonly onlyfor formaintenance maintenance authorized technicians.

LOX 3 / LOX 4 - internal/e

Minimumheight height Minimum of of 2,5mmfrom from floor 2,5 floor

LOX4 External view

DOD SBC SBC(manual (manual motion LPDM motionchain chainversion) version) Catena di prolunga Extension chain DODLCG LPDM LCG

H DOD H-LPDM

H LPDM H DOD

LPDM LCG DODLCG

5000

No

9000

Yes Sì

DOD SBV, SBV,SBO SBO(manual (manual motion motion rod LPDM rodversion) version) H-LPDM H DOD

≤ 4,5 m

H-LPDM H DOD

≤ 7,5 m

H-LPDM H DOD

≤ 10,5 m

5 1

1

1

3

3

2

4 3 3 2 2

52

Sectinal doors technical data sheet

- 23 -

Sectinal doors technical data sh

Legend forfor accessories Legend accessories 11- LPDM -DOD L PDMSBV SBV Manual vertical release Manual vertical release 22- -MN3 MN3 Push rod rod L 3000 mm Push L 3000 mm -DOD LPDMSBRIN SBRIN 33- LPDM Gear motor release Gear motor release drivedrive with with rod rod HLPDM 4,5from m from the ground HHLPDM DOD >4.5>m the ground -DOD LPDMSBP SBP 44- LPDM Release extension H DOD 7,5 m Release extension H DOD >7.5> m the ground fromfrom the ground (max(max 10.5 10,5 m) m) 5 - LPDM SBO 5 - DOD SBO Manual horizontal release Manual horizontal release 24/10/11

DITEC S.p.A


1300 780 450

Docks

Product Range > Doors LOX SB - external release

Panel Lift Door Intro 4

GLOBE - accessories

Leda

LOX SB - external release

Panel Door Globe SB Motors

Large Doors 8

LOX SB - external release

Panel Lift

15

High Speed

62

PVC 81

300

External view

DockBrain 86

Internal view

Dock Intro 92

external lockLOX 3 / LOX 4 - internal/external lock

Leveller 95 LOX 3

Drawbridge 99 Seals 103 Barriers 106

with cassette

LOX 3 External view

Ramp 107

LOX3 Internal view

300

Structures 108

External view

LOXview 3 Internal

Shelters 109

ternal lock

Scissor Lift 110

300

Code Index

300

External view

Internal view

LOX 3 / LOX 4 - internal/external lock LOX 3 External view LOX3 Internal view

290

with cassette

300

300

LOX 3

LOX 3

300

heet

24 -

24/10/11

DITEC S.p.A

LOX 3 External view

LOX4 External view with cassette

LOX3 Internal view

290

LOX 3

300

300 300

- 24 -

24/10/11

290

eet

Freight Hoists 113

LOX 3

300

DITEC S.p.A

53 300


Product Range > Doors Panel Lift Door

Leda

Panel Door Maintenance

MAINTENANCE The maintenance of the door must be carried out by specialist technicians. Maintenance schedule (every 6 months): • The maintenance and lubrication of the mechanical parts must be performed with the door lowered and, in the case of automatic functioning, with the power switched off. • Check the functioning of the safety devices (the cable and spring breakage device in the manual versions and the motor in the automatic versions). • Check the raising cables for signs of wear. • Check that the cables slide freely in the cylinders. • Periodically lubricate the hinges, bearings, wheel pivots and torsion springs. • Check that there are no obstacles that alter the correct sliding of the wheels in the tracks. • Check that the upper sliding structure is perf ectly anchored to the ceiling and that there are no faults, folds or sagging. • Check that there are no loose screws or bolts. • Do not modify any part of the raising and/or sliding system. • Always use original DITEC spare parts. No responsibility can be accepted for any damage to people or property if original DITEC spare parts are not used. This type of maintenance must be performed periodically on the doors. It is therefore advisable to keep an up-to-date maintenance book that indicates the registration number of the door as shown on its identity plaque.

Operations that must NEVER be carried out during maintenance:

• Do not cut one or more of the traction cables of the door • Do not loosen the tension of the springs (this tension has been calculated by the manufacturer on the basis of the weight of the curtain). • Do not tamper with the safety devices • Do not loosen the anchorage bolts of the hinges situated between the panels.

54


SMSSPFP for INTEGRAL FLAT*FLAT* panels panels (only RAL 9010RAL white colour) m2 SMSSPFP Surcharge Surcharge for INTEGRAL (only 9010 white colour)

22.00 m2

22.00

55.00 m2

55.00

1300 780 450

Product Range > Doors

SMSSPFS for FLAT GROOVED panelspanels in TEAKinand NOGAL m2 SMSSPFS Surcharge Surcharge for FLAT GROOVED TEAK andcolours NOGAL colours

Docks

For Panel Lift Doors

*INTEGRAL FLAT. TheThe section panels made made with smooth sheet metal maymetal showmay a slightly surface caused by a specific production process *INTEGRAL FLAT. section panels with smooth sheet showwaved a slightly waved surface caused by a specific production process Accessories and notnot therefore represent a defect anddoes does therefore represent a defect

Windows, portholes and grilles (specify on panel the Windows, portholes andand grilles (specify on which panel starting from thefrom bottom) Windows, portholes grilles (specify on which which panel starting starting from thebottom) bottom) Code Code

SMOBO2B SMOBO2B

Description Description

Rectangular blackblack acrylicacrylic porthole, 680x373680x373 mm Rectangular porthole, mm (cannot be applied on CASSETTE model panels) (cannot be applied on CASSETTE model panels)

U.o.M.

Unit U.o.M. price

pc

78.00 pc

Unit price

78.00

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81 SMOBO1B acrylic porthole, 488x322 mm mm SMOBO1BBlack Black acrylic porthole, 488x322

pc

90.00 pc

DockBrain 86

90.00

Dock Intro 92 pc

90.00 pc

90.00

The technical data shown in this Price List are not binding. For more details, refer to the relevant leaflets and Technical manuals, also available from the website: www.ditecentrematic.com

SMOBO1W acrylic porthole 490x325 mm mm SMOBO1WWhite White acrylic porthole 490x325

Leveller 95 Drawbridge 99

Black porthole with stretched rhomboidal mesh, painted 490x325 Black porthole with stretched rhomboidal mesh,black painted black 490x325 SMOBO1BR pc 97.00 SMOBO1BR pc mm. Air Air grillegrille 760 cm m2) each mm. 7602 (0.076 cm2 (0.076 m2) each

97.00

White porthole with with stretched rhomboidal mesh, painted 490x325 White porthole stretched rhomboidal mesh,black painted black 490x325 pc 97.00 pc mm. Air Air grillegrille 760 cm m2) each mm. 7602 (0.076 cm2 (0.076 m2) each

97.00

SMOBO3B SMOBO3B

Black ovaloval acrylic porthole, 663x343 mm mm Black acrylic porthole, 663x343 (cannot be applied on CASSETTE model panels) (cannot be applied on CASSETTE model panels)

pc

87.00 pc

87.00

SMOBO4B SMOBO4B

Black rectangular acrylic porthole, 609x146609x146 mm Black rectangular acrylic porthole, mm (cannot be applied on CASSETTE model panels) (cannot be applied on CASSETTE model panels)

pc

109.00 pc

109.00

Black PVCPVC ventilation grille,grille, 480x90480x90 mm mm Black ventilation AirAir grille 250 250 cm2 cm2 each each grille

pc

47.00 pc

47.00

SMGRI1W PVCPVC ventilation grille,grille, 480x90480x90 mm. Airmm. grilleAir 250cm2 SMGRI1W White White ventilation grilleeach 250cm2 eachpc

47.00 pc

47.00

Side pedestrian doors Accessories Accessories

Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

Guides, springs doors ( Note: (not Only if previously authorised by the Technical Department ) Side pedestrian available with CASSETTE model panels) Code springs Guides, springs Guides,

SMXDI 1

Description

32

U.o.M.

SM-EXP-GB-February 2013 issue 2013 issue 32 SM-EXP-GB-February This Price List This cancels andList replaces Price cancels and replaces

previous ones. previous ones. Side pedestrian door, profile for Alu, in black, SMDOL8° 1 nominal L 800 x H 2500 mm max Surcharge tilting (only for HL)tilting (only for HL) pc SMXDIfor double Surcharge for double

SMDOL12°

pc 293.00 pc

1,050.00 293.00

pc

1,125.00

2 10.00 m pc

10.00 1,179.00

Side pedestrian door, profile for Alu, in black, nominal L 1200 x H 2500 mm max

1 Side pedestrian door, profile for Alu, in black, SMXS25K 1 ExtraSMDOL14° charge for heavy springs (25.000 SMXS25K Extra duty charge for heavy dutycycles) springs (25.000 cycles) nominal L 1400 x H 2500 mm max

m2

Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and SMDOL8T° NOGAL colours, black aluminium perimeter profile, 1 L 800 x H 2500 mm max SMXS50K 1 ExtraSMXS50K charge for heavy springs (50.000 m2 20.00 Extra duty charge for heavy dutycycles) springs (50.000 cycles) Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and SMDOL12T° NOGAL colours, black aluminium perimeter profile, L 1200 x H 2500 mm max Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and SMXS100K1 Extra charge for1 heavy springs (100.000 m2 41.00 SMXS100K Extra duty charge for black heavy duty cycles) springs (100.000 profile, cycles) SMDOL14T° NOGAL colours, aluminium perimeter L 1400 x H 2500 mm max for pedestrian side door and any overhead clearance: RAL Note 1: Only if previously authorised by the Technical Department Note 1: Only if Painting previously authorised by the Technical Department SMVEDOL

9010, RAL 6005, RAL 8014 and RAL 9006

Guides, springs Guides, springs ° When the door is open, the door passage PH is reduced by 50 mm and PL by 100 mm

Unit price

pc

1,071.00

m2

20.00

pc

1,179.00

2 m pc

41.00 1,234.00

pc

174.00

55

The technical data shown in this Price List are not binding. For more details,

Barriers 106

SMOSMOBO1WR BO1WR

SMGRI1B SMGRI1B

Seals 103


Accessories Accessories SMXDI

Surcharge for double tilting (only for HL)

pc

293.00

m2

10.00

pc

m2 293.00pc

293.00 20.00

m2

22 10.00mm

10.00 41.00

m2

2 20.00m

20.00

Product Range > Doors SMXS25K Extra charge for heavy duty springs (25.000 cycles) 1

Guides, springs Guides, springs SMXDI 1

Accessories 1 1 SMXDI for (only double for HL) SMXS50K Extra charge for heavy duty(only springs (50.000 cycles) Surcharge for Surcharge double tilting fortilting HL)

For Panel Lift Doors

Side pedestrian doors

11 SMXS25K Extra charge duty cycles) SMXS100K Extra charge forheavy heavy dutysprings springs (100.000 cycles) SMXS25K 1 Extra charge for heavy duty for springs (25.000 cycles)(25.000

Note 1: Only if previously authorised by the Technical Department

Guides, springs doors (not available with CASSETTE model panels) Side pedestrian Code Code

Description Description

1 Side pedestrian door,(100.000 profile for Alu,(100.000 in black,cycles) SMXS100K Extra charge heavy duty springs SMXS100K1 Extra charge for heavy duty for springs cycles) m2 SMDOL8° nominal L 800 x H 2500 mm max SMXBSZ Galvanised slotted “C” profile for suspensions L=2000 mm

2 41.00mpc pc

41.00 1,050.00 13.00

pc

1,125.00

pc

1,179.00

Side by pedestrian door, profile for Alu, in black, Note 1: Only if previously authorised by the Technical Department Note 1: Only if previously authorised the Technical Department SMDOL12° nominal L 1200 x H 2500 mm max

Guides, springs Sideclosers, pedestrianhandles, door, profilereleases for Alu, in black, Guides, springs Locks, door and hardware SMDOL14° Code

Side pedestrian doors Code

nominal L 1400 x H 2500 mm max Description

Description

Unit Unit price price

U.o.M. U.o.M.

U.o.M.

Unit U.o.M. price

Unit price

Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and Galvanised steel internal lock bolt. SMLOX2 pc 15.00 SMDOL8T° NOGAL colours, black with aluminium profile, pc 1,071.00 (Supplied as standard Lisbon perimeter manual version) L 800 x H 2500 mm max SMXBSZ slotted Galvanised slotted profile forL=2000 suspensions 13.00 SMXBSZ Galvanised “C” profile for “C” suspensions mm L=2000 mm pc 13.00pc Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and SMDOL12T° NOGAL colours, black aluminium perimeter profile, pc 1,179.00 Locks, door closers, handles, releases Internal/external boltmax complete withand lockhardware - CASSETTE model panels) L 1200 xdoors H 2500 mm Side pedestrian (not available with SMLOX3 pc 98.00 for GROOVED panels Unit Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and U.o.M. Code door closers, handles, releases Locks, and profile, hardware price Locks, door closers, handles, releases andDescription hardware SMDOL14T° NOGAL colours, black aluminium perimeter pc 1,234.00 L 1400 x H 2500 mm max Side pedestrian door, profile for Alu, in black, SMDOL8° steel pc 1,050.00 Galvanised steel internal lockmax bolt. Internal/external bolt with Galvanised internal lock nominal Lfor 800 xbolt. H 2500complete mm Painting pedestrian side door andlock any -overhead clearance: SMLOX2 15.00 SMLOX4 pc 103.00 SMLOX2 pc RAL 15.00pc pc 174.00 SMVEDOL (Supplied as standard with Lisbon manual version) for FRAMED panels (Supplied as standard with6005, Lisbon manual version) 9010, RAL RAL 8014 and RAL 9006 Side pedestrian door, profile for Alu, in black, SMDOL12° pc 1,125.00 nominal L 1200 x H 2500 mm max ° When the door is open, the door passage PH is reduced by 50 mm and PL by 100 mm

SMLOX3

SMLOX4

SMDOC

SMDOP

Internal/external bolt complete lock Internal/external bolt completedoor, withprofile lock - for with Side pedestrian Alu, in black, SMLOX3 SMDOC Door closer, only for side pedestrian door SMDOL14° for GROOVED panels for GROOVED panels L 1400 (not x H 2500 mm max with CASSETTE Overheadnominal clearance available

pc

98.00pc pc

pc model panels)

98.00 184.00 1,179.00

Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and SMOHP8 NOGAL Insulated overhead clearance L800 x H650 mm pc 1,071.00 267.00 SMDOL8T° colours, black aluminium perimeter profile, pc Internal/external bolt complete with lock Internal/external bolt complete with lock L 800 xH 2500 mm max SMLOX4 103.00 pc 103.00pc for FRAMEDoverhead panels only forSMDOP FRAMED panels Anti-panic handle, for pedestrian doors 282.00 Insulated clearance with aluminium surround profile, in pc SMOHP815 Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and pc 437.00 black, nominal 800 xaluminium H 1500 mm max SMDOL12T° NOGAL colours, Lblack perimeter profile, pc 1,179.00 L 1200 x H 2500 mm max fitted pedestrian door, withL800 GROOVED SMOHP14 Side Insulated overhead clearance x H650FLAT mm panels in TEAK and pc 437.00 SMDOC Door onlyblack for side pedestrian door profile, 184.00 Door closer, only forcloser, side pedestrian door pc 184.00pc SMDOL14T° NOGAL colours, aluminium perimeter 1,234.00 L 1400 x H 2500 mm max Insulated overhead clearance with aluminium surround profile, in SMOHP1215 pc 726.00 black, nominal L 1400 xside H 1500 Painting for pedestrian doormm andmax any overhead clearance: RAL SMVEDOL pc 174.00 9010, RAL 6005, RAL 8014 and RAL 9006 Overhead clearance thermally insulated with GROOVED FLAT panels in Anti-panic handle, only for pedestrian doors pc 282.00pc SMDOP Anti-panic handle, only for pedestrian doors perimeter SM-EXP-GB-February 2013 SMOHP8T TEAK and NOGAL colours, black aluminium profile, pc issue282.00 276.00 33 Price List cancels and replaces ° When the doorLis800 open, door passage 100 mm x Hthe 650 mm max PH is reduced by 50 mm and PL byThis previous ones. Overhead clearance thermally insulated with GROOVED FLAT panels in

Overhead (notcolours, available with CASSETTE SMOHP14T clearance TEAK and NOGAL black aluminium perimeter model profile, panels)pc

452.00

SMOHP8

L 1400 x H 650 mm max Insulated overhead clearance L800 x H650 mm

pc

267.00

SMOHP815

Insulated overhead clearance with aluminium surround profile, in black, nominal L 800 x H 1500 mm max

pc

437.00

33

SM-EXP-GB-February 2013 issue SM-EXP-GB-February 2013 issue 33 This Price List cancelsThis andPrice replaces List cancels and replaces previous ones.

SMOHP14

previous ones. Insulated overhead clearance L800 x H650 mm

pc

437.00

SMOHP1215

Insulated overhead clearance with aluminium surround profile, in black, nominal L 1400 x H 1500 mm max

pc

726.00

56

Overhead clearance thermally insulated with GROOVED FLAT panels in

The technical data shown in this Price List are not binding. For more details, refer to the relevant leaflets and Technical manuals, also available from the website: www.ditecentrematic.com

1 SMXS50K Extra charge heavy(50.000 duty springs Guides, springs SMXS50K 1 Extra charge for heavy duty for springs cycles)(50.000 cycles)


1300 780 450

Docks

Product Range > Doors For Panel Lift Doors

Accessories

Intro 4

Accessories Accessories

Large Doors 8

Locks, door closers, handles, releases and hardware Locks, door closers, handles, releases and hardware Locks, Code door closers, handles, releases Descriptionand hardware Code

SMDEB08

Description

Key-operated handle with cord L 8 m for remote-operated release system, to be positioned H > 2,5 m from the ground. Key-operated handle with cord L 8 m for remote-operated release system, to be positioned H > 2,5 m from the ground.

15

High Speed

62

PVC 81 U.o.M. U.o.M.

Unit price Unit price

pc

124.00

pc

124.00

SMSSNFM Surcharge for no holes on handle

pc

17.00

SMSSNFM Surcharge for no holes on handle

pc

17.00

SMDEB08

Panel Lift

DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106

Tubular sections, coverings, panels Tubularsections, sections, coverings, Tubular coverings,panels panels Code Description Code

SMVEL

SMVEL SMVELF SMVELF SMVELT SMVELT SMTAMP SMTAMP SMTAMPT SMTAMPT SMTAMPF SMTAMPF

Ramp 107 U.o.M.

Description U.o.M. Insulated covering with black aluminium profiles and groove panels, m H 610 mm max (H min 80 mm): external colour same as panel Insulated covering with black aluminium profiles and groove panels, m H 610 mm max (H insulated min 80 mm): external colour sameBlack as panel FLAT INTEGRAL panel covering black aluminium m profile, H 610 mm max (H min 80mm): coordinate external colour FLAT INTEGRAL insulated panel covering black Black aluminium m profile, H 610 mm min 80mm): coordinate external Top covering mademax of (H grooved thermally insulated TEAKcolour or NOGAL panel with black aluminium perimeter profile, H 610 mm max (H min m Top covering made of grooved thermally insulated TEAK or NOGAL 80 mm), coordinated external colour panel with black aluminium perimeter profile, H 610 mm max (H min m Panelling with thermally insulated 80 mm), coordinated external colourstreaked grooved panels complete with black alu profile, supplied unassembled. Panelling with thermally insulated streaked grooved panels complete m2 HA min 150 mm with black alu profile, supplied unassembled. Horizontal only panel layout m2 HA min 150 mm TEAK or NOGAL insulated panelling; black aluminium profile, supplied Horizontal only panel layout unassembled. TEAK or NOGAL insulated panelling; black aluminium profile, supplied m2 HA min 150 mm unassembled. Horizontal only panel layout m2 HA min 150 mm FLAT INTEGRAL insulated Horizontal only panel layoutpanelling; black aluminium profile, supplied unassembled. FLAT INTEGRAL insulated panelling; black aluminium profile, supplied m2 HA min 150 mm unassembled. Horizontal only panel layout m2 HA min 150 mm Horizontal only panel layout

Unit price Unit price

Structures 108

78.00

Shelters 109

78.00 94.00

Scissor Lift 110

94.00

Freight Hoists 113

104.00

Code Index

104.00 131.00 131.00 154.00 154.00 137.00 137.00

57


Tubular sections, coverings, panels Description

U.o.M.

Product Range > Doors Hot galvanised tubular section, cut to size and complete with top and SMSTR1Z

bottom retainer plates, 100 x 50 x 2 mm - L 3000 mm max

Accessories Accessories Accessories

Unit price

pc

116.00

SMSTR2Z

Hot galvanised tubular section, cut size and FortoPanel Liftcomplete Doorswith top and bottom retainer plates, 100 x 50 x 2 mm - L 6000 mm max

pc

215.00

SMSTR5Z

Hot galvanised tubular section, cut to size and complete with top and bottom retainer plates, 150 x 50 x 2 mm - L 3000 mm max

pc

141.00

Tubular sections, coverings, panels Hot galvanised tubular section, cut to size and complete with top and Tubular sections, coverings, panels Tubular sections, coverings, panels SMSTR6Z

pc

263.00

Code

bottom retainer plates, 150 x 50 x 2 mm - L 6000 mm max

Code

Description

Description

U.o.M.

Unit U.o.M. price

Unit price

SMSTR1Z

Steel tubing, RAL painted like the door, cut to size and complete with SMSTR Hot galvanisedHot tubular section, cut tosection, size and withcomplete top and withmax galvanised tubular cutcomplete to size and top and pc pc 116.00 pc SMSTR1Z top and bottom retainer plates, 100 x 50 x 2 mm - L 3000 mm bottom retainer plates, 100 x 50 x 2 mm 3000 bottom retainer plates, 100- xL 50 x 2mm mmmax - L 3000 mm max

111.00 116.00

SMSTR2Z

Steel tubing, RAL painted like the door, cut to size and complete with Hot galvanisedHot tubular section, cut tosection, size and withcomplete top and with top and pc SMSTR2 galvanised tubular cutcomplete to size and pcmax 215.00 SMSTR2Z top and bottom retainer plates, 100 x 50 x 2 mm - L 6000 mm pc bottom retainer plates, 100 x 50 x 2 mm 6000 bottom retainer plates, 100- xL 50 x 2mm mmmax - L 6000 mm max

204.00 215.00

SMSTR5Z

tubing, RAL painted likeand the door, cutand to size Hot galvanisedSteel tubular section, cut tosection, size with topand andcomplete Hot galvanised tubular cutcomplete to size complete with top with and pc SMSTR5 pcmax 141.00 SMSTR5Z top and bottom retainer plates, 150 x 50 x 2 mm - L 3000 mm pc bottom retainer plates, 150 x 50 x 2 mm 3000 bottom retainer plates, 150- xL 50 x 2mm mmmax - L 3000 mm max

132.00 141.00

SMSTR6Z

tubing, RAL painted likeand the door, cutand to size Hot galvanisedSteel tubular section, cut tosection, size with topand andcomplete Hot galvanised tubular cutcomplete to size complete with top with and pc SMSTR6 pcmax 263.00 SMSTR6Z top and bottom retainer plates, 150 x 50 x 2 mm - L 6000 mm pc bottom retainer plates, 150 x 50 x 2 mm 6000 bottom retainer plates, 150- xL 50 x 2mm mmmax - L 6000 mm max

244.00 263.00

SMSTR

Steel tubular section coated with smooth wood effect metal section in Steel tubing, RAL painted like the door, cutside to and withwith Steel tubing, RALas painted like thesize cutcomplete tocomplete size and complete with pc SMSTRSW the same colour the outer ofdoor, the door, top and pc 111.00 SMSTR pc top and bottom retainer plates, 100 x 50 x 2 mm L 3000 mm max top and bottom retainer plates, 100 x 50 x 2 mm L 3000 mm max bottom retainer plates, 100 x 50 x 2 mm - L 3000 mm max

178.00 111.00

SMSTR2

Steel tubular section coated with smooth wood effect metal section in Steel tubing, RAL painted like the door, cutside to and withwith Steel tubing, RALas painted like thesize cutcomplete tocomplete size and complete with pc SMSTR2SW the same colour the outer ofdoor, the door, top and pc 204.00 SMSTR2 pc top and bottom plates, 100 x 100 50 xx250 mm 6000 topretainer and retainer bottom retainer plates, 100 xL50 2 mm mm -mm L 6000 bottom plates, x 2- mm -x L 6000max maxmm max

322.00 204.00

SMSTR5

Steel tubular section coated with smooth wood effect metal section in Steel tubing, RALas painted like thesize cutcomplete tocomplete size and complete with pc Steel tubing, RAL painted like the door, cutside to and withwith SMSTR5SW the same colour the outer ofdoor, the door, top and SMSTR5 pc pc 132.00 topretainer and retainer bottom retainer plates, 150 xL50 2 mm mm -mm L 3000 top and bottom plates, 150 x 150 50 xx250 mm 3000 bottom plates, x 2- mm -x L 3000max maxmm max

217.00 132.00

Steel tubular section coated with smooth wood effect metal section in Steel tubing, RALas painted like thesize cutcomplete tocomplete size and complete with pc Steel tubing, RAL painted like the door, cutside to and withwith SMSTR6SW the same colour the outer ofdoor, the door, top and SMSTR6 pc pc 244.00 bottom plates, x 2- mm -x L 6000max maxmm max topretainer and retainer bottom retainer plates, 150 xL50 2 mm mm -mm L 6000 top and bottom plates, 150 x 150 50 xx250 mm 6000

400.00 244.00

tubular coatedwood with smooth woodsection effect metal section in Steel tubular Steel section coatedsection with smooth effect metal in SMSTRSW the same colour as the outer side of the door, complete with and178.00 pc SMSTRSW the same colour as the outer side of the door, complete with top and pc Seal brush section L 2500 mm complete with aluminium top mounting SMS4560B25 pc bottom plates, 100- xL50 x 2 mm mm max - L 3000 mm max bottom retainer plates, 100 x 50 x 2 mm 3000 tilted atretainer 45째

178.00 37.00

tubular coatedwood with smooth woodsection effect metal section in Steel tubular Steel section coatedsection with smooth effect metal in SMSTR2SW theas same as the outer side of the door, top and322.00 pc SMSTR2SW the same colour the colour outer side of the door, complete withcomplete top and withpc bottom retainer plates, 100- xL50 x 2 mm mm max - L 6000 mm max bottom retainer plates, 100 x 50 x 2 mm 6000

322.00

tubular coatedwood with smooth woodsection effect metal section in Steel tubular Steel section coatedsection with smooth effect metal in SMSTR5SW theas same as the outer side of the door, top and217.00 pc SMSTR5SW the same colour the colour outer side of the door, complete withcomplete top and withpc bottom retainer plates, 150- xL50 x 2 mm mm max - L 3000 mm max bottom retainer plates, 150 x 50 x 2 mm 3000

217.00

SMSTR6

tubular coatedwood with smooth woodsection effect metal section in Steel tubular Steel section coatedsection with smooth effect metal in SMSTR6SW theas same as the outer side of the door, top and400.00 pc 400.00 SMSTR6SW the same colour the colour outer side of the door, complete withcomplete top and withpc SM-EXP-GB-February 2013 issue bottom retainer plates, 150- xL50 x 2 mm mm max - L 600035 mm max bottom retainer plates, 150 x 50 x 2 mm 6000 This Price List cancels and replaces previous ones.

Seal brush section L 2500 mm withmounting aluminium mounting Seal brush section L 2500 mm complete withcomplete aluminium pc SMS4560B25 SMS4560B25 pc 37.00 tilted at 45째 tilted at 45째 58

37.00

nical data shown in this Price List are not binding. For more details, he relevant leaflets and Technical manuals, also available from the website: www.ditecentrematic.com

Code


1300 780 450

Docks

Product Range > Doors

Accessories Accessories Accessories Accessories Accessories Accessories

For Panel Lift Doors Intro 4

Additionalpainting painting Additional

Additional painting Code

Code

Additional painting AdditionalAdditional painting painting

Description

Description

U.o.M.

Unit price

Unit price

U.o.M.

Large Doors 8 Panel Lift

15

m2

Unit m 39.00 39.00 Unit U.o.M. Unitprice U.o.M. price price

High Speed

62

m2m2

m2 39.00 m2m2 39.00

39.00 39.00 39.00

PVC 81

Covering outside painting non standard colour for VEL/VELF and/or SMVERI Door painting non standard colour, on outside m2 2 2 painting in non standard colour for on VEL/VELF and/or 39.00 SMVERICovering Dooroutside painting in non standard colour, onin outside SMVERI Door painting ininnon standard colour, outside m2m SMVERH 39.00 SMVERH m2m TAMP/TAMPF TAMP/TAMPF

39.00 39.00 39.00

Covering outside painting innon non standard colour for VEL/VELF and/or Covering outside painting in non standard colour for VEL/VELF Covering outside painting inin colour forand/or VEL/VELF 2 and/or Covering inside painting nonstandard standard colour VEL/VELF and/or SMVERH m2 2 inside painting in non standard colour VEL/VELF and/or 39.00 SMVERHCovering SMVERH m2m 2m SMVERHI TAMP/TAMPF 39.00 SMVERHI m TAMP/TAMPF TAMP/TAMPF TAMP/TAMPF TAMP/TAMPF

39.00 39.00 39.00

SMVERE

Code

SMVERE painting colour, in non standard on outside Code in Door Description Door painting non standard on outsidecolour, Code

Description

Description

SMVERE Door painting in non standard colour, on outside SMVEREDoor Door painting in non standard colour, on outside SMVERE Door painting in non standard colour, SMVERI non standard colour,on onoutside outside SMVERI painting in Door non standard colour, on outside

U.o.M.

2

DockBrain 86

Side pedestrian doors

Dock Intro 92 Leveller 95

Drawbridge 99 Covering inside painting innon non standard colour VEL/VELF and/or 2 2 Covering inside painting in non standard colour VEL/VELF and/or Covering inside painting in standard colour VEL/VELF and/or 2 39.00 SMVERHI 39.00 SMVERHI m 39.00 SMVERHI mm Safety and driving units Safety devices and devices driving units TAMP/TAMPF TAMP/TAMPF TAMP/TAMPF Safety devices and driving units(not ( Note: If the winch is used with a NL, RLO or RLB sliding system, add accessory CTB ) Seals 103 Side pedestrian doors available with CASSETTE model panels)

Unit Winch metal m chain, beRLO, usedRLB withmanual NL, RLO, RLB manual U.o.M. Winch with metal 8 m with chain, to be8 used with to NL, Codeand Description 3 3 Safety devices and driving units Safety devices driving units Safety devices and driving units SMHOCM pc 135.00 SMHOCM pc 135.00 price together with next CTB accessory) device (see next accessory) versions togetherversions with CTB device (see Side pedestrian door, profile for Alu, in black, Winch with metal m chain, be used NL, RLO, RLB manual Winch metal 88m totobebe used with NL, RLO, RLB manual Winch8with with metalto mchain, chain,with used with NL, RLO, RLB manual pc SMDOL8° 1,050.00 SMHOCM 3 SMHOCM pc 135.00 pc pc 135.00 SMHOCM 33 Safety 135.00 nominal L 800 x H 2500 device mm max rope restraining for thenext following sliding systems: NL, versions together with CTB device (see next accessory) versions together with CTB device (see accessory) Safety rope restraining device for the following sliding systems: NL, versions together with CTB device (see next accessory) SMCTB pc 21.00 SMCTB pc 21.00 RLO, RLB, manual version, to be used with the HOCM winch RLO, RLB, manual version, to be used together with thetogether HOCM winch Side pedestrian door, profile for Alu, in black, SMDOL12° pc 1,125.00 nominal L 1200 Hfor2500 mm max Safety restraining device the following sliding systems: NL,systems: rope restraining device for the following sliding Safety rope restraining device for the following sliding systems: 3: Ifrope the winch is used with axNL, RLO or RLB sliding system, add accessory CTB NL,NL, Note 3: If the winchNote is used with aSafety NL, RLO or RLB sliding system, add accessory CTB SMCTB pc 21.00 SMCTB pc pc 21.00 SMCTB 21.00 RLO, RLB, manual version, to beversion, used together withtogether the HOCM winch RLO, manual totobebeused with thethe HOCM winch RLO,RLB, RLB, manual version, used together with HOCM winch Remote controls Remote controls Side pedestrian door, profile for Alu, in black, SMDOL14° pc 1,179.00 Note 3: If the winch isIfIf used with a is NL, RLO or RLB sliding system, add accessory CTB Note the with axaNL, RLO sliding system, add accessory CTB Note 3: 3: thewinch winch isused used with NL, RLOor orRLB RLB sliding system, add accessory CTB nominal L 1400 H 2500 mm max

SMGOL4C Grey, 4fitted function fixed code Remote Grey, 4 function controls fixed transmitter pcTEAK and 30.40 pc Sidecode pedestrian door,transmitter with GROOVED FLAT panels in SMDOL8T° NOGAL colours, black aluminium perimeter profile, pc L 800 xfunction H 2500 mm max SMGOL4C SMGOL4C Grey, 4 function fixed code transmitter pc 30.40 Grey, 4 fixed code transmitter pc SMGOL4C Grey, 4 function fixed code transmitter pc Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and Wall bracket for GOL transmitters SMGOSW WallSMGOSW bracket for GOL transmitters pc 2.60 pc SMDOL12T° NOGAL colours, black aluminium perimeter profile, pc L 1200 x H 2500 mm max SMGOSW SMGOSW Wall bracketWall for GOL transmitters pc bracket for GOL transmitters pc Side pedestrian door, with GROOVED FLAT panels in TEAK and 2.60 SMGOSW Wall fitted bracket for GOL transmitters pc SMDOL14T° NOGAL colours, black aluminium perimeter profile, pc SMGOL4W 433 Four-channel, 433 MHz transmitter housed in a metal enclosure SMGOL4W Four-channel, housed in a metal enclosure pc 103.00 pc L MHz 1400 transmitter x H 2500 mm max

2.60 2.60 1,234.00 103.00

Painting fortransmitter pedestrian side door anyenclosure overhead SMGOL4W SMGOL4W Four-channel, 433 MHz in aand metal pc RAL 103.00 Four-channel, 433 MHz housed transmitter housed in a metalclearance: enclosure pc pc SMVEDOL SMGOL4W 9010, Four-channel, MHz transmitter housed in a metal enclosure pc RAL 6005,433 RAL 8014 and RAL 9006

103.00 174.00 103.00

SMGOL4M

SMGOL4M radio Four-channel radio coded keypad Four-channel coded keypad

pc

30.40 1,071.00 30.40 30.40

SMGOL4M SMGOL4M Four-channel radio coded keypad pc 103.00 Four-channel radio coded keypad pc SMGOL4M Four-channel radio coded keypad pc Digital vandal-resistant combination keyboard (must be fitted withpanels) Digital vandal-resistant combination (must be fitted with Overhead clearance (notkeyboard available with CASSETTE model pc SMLAN4T SMLAN4T pc 104.00 LAN 4S decoder)LAN 4S decoder) Digital vandal-resistant combinationcombination keyboard (must be fitted withbe fitted with Digital vandal-resistant keyboard (must SMOHP8 Insulated overhead clearance L800 x keyboard H650 mm(must be fitted SMLAN4T SMLAN4T pc with 104.00 pc pc Digital combination LAN 4S decoder) LAN 4S vandal-resistant decoder) SMLAN4T pc LAN 4S decoder) SMLAN4S decoder to be1controlled with 2 LAN 4T surround SMLAN4S Board decoder toBoard be controlled with or 2 LAN 4T pc profile, 77.50 Insulated overhead clearance with1 or aluminium in pc SMOHP815 pc black, nominal L 800 x H 1500 mm max SMLAN4S SMLAN4S Board decoder to be controlled with 1 or 2 LAN pc 77.50 Board decoder to be controlled with4T 1 or 2 LAN 4T pc SMLAN4S Board decoder to be controlled with 1 or 2 LAN 4T pc SMBIXLR22 Self-learning two-channel receiver MHz SMBIXLR22 Self-learning - clearance 433 MHz pc 80.50 pc SMOHP14two-channel Insulated receiver overhead L800-x433 H650 mm pc

Code Index

104.00 267.00 104.00 104.00 77.50 437.00 77.50 77.50 80.50 437.00

SMBIXLR42 SMBIXLR42 Self-learningSelf-learning four-channel receiver - 433 MHz pc panels 113.50 four-channel receiver - 433 MHz Overhead clearance thermally insulated with GROOVED FLAT inpc SMBIXLR42 Self-learning four-channel receiver 433 MHz pc SMOHP8T TEAK and NOGAL colours, black aluminium perimeter profile, pc L 800 433 x H 650 SMBIXAL Mhzmm max SMBIXAL Aerial 433 Mhz Aerial pc 21.00 pc

113.50 113.50 276.00

Overhead clearance thermally insulated with GROOVED FLAT inpc Aerial 433 Mhz pc panels21.00 SMBIXAL Aerial 433 Mhz SMOHP14T TEAK and NOGAL colours, black aluminium perimeter profile, pc SMBIXAL Aerial 433 Mhz pc L 1400 x H 650 mm max

21.00 452.00 21.00

21.00

SM-EXP-GB-February 2013 issue SM-EXP-GB-February 2013 issue 36 This Price List cancels and replaces This Price List cancels and replaces SM-EXP-GB-February 2013 issue SM-EXP-GB-February 2013 issue previous ones.

Freight Hoists 113

103.00 103.00

80.50 80.50 726.00 113.50

36

Scissor Lift 110

103.00

SMBIXLR22 SMBIXLR22 Self-learningSelf-learning two-channeltwo-channel receiver - 433 MHz - 433 MHz pc 80.50 receiver pc Insulated overhead clearance with- 433 aluminium surround profile, in pc SMBIXLR22 Self-learning two-channel receiver MHz SMOHP1215 Self-learning four-channel receiver - 433 MHz pc SMBIXLR42 SMBIXLR42 Self-learning four-channel receiver - 433 MHz pc 113.50 pc black, nominal L 1400 xH 1500 mm max

SMBIXAL

Shelters 109

2.60 1,179.00

103.00 pc

° When the door is open, the door passage PH is reduced by 50 mm and PL by 100 mm

Structures 108

59

The technical data shown in this Price List are not binding. For more details, refer to the relevant leaflets and Technical manuals, also available from the website: www.ditecentrematic.com

SMGOL4C

Ramp 107

The technical data shown in this Price List are not binding. For more details, The technical data shown in this Price List are not binding. For more details, refer to the relevant leaflets and Technical manuals, also available from the website: www.ditecentrematic.com refer to the relevant leaflets and Technical manuals, also available from the website: www.ditecentrematic.com

Remotecontrols controls Remote controls Remote

Barriers 106


Productpedestrian Range > Doors doors Side Accessories Accessories Accessories Accessories Accessories

For Panel Lift Doors

Side pedestrian (not available Photocells, Photocells, ribs and safety ribs doors and devices safety devices with CASSETTE model panels)

Code Description Photocells, Photocells, ribs and safety ribs and devices safety devices Pair of photocells Pair offorphotocells outside fitting for outside - max fitting range:- 30 max m range: power 30 supply m power supply

Unit price

U.o.M.

SMLAB3C

SMLAB3C 24 V= / 24 V~ Side 24 V=pedestrian / 24 V~ pc 82.40 pc door, profile for Alu, in black, SMDOL8° Pair of photocells Pair offor photocells outside forvertical outside - max fitting range: - max 30 mountings mrange: power 30 supply m power supply pc pre-fitted in anodised pre-fitted in anodised aluminium mountings vertical nominal Laluminium 800 x H fitting 2500 mm max SMLAB3C SMLAB3C 24 V= / 24 V~24 V= / 24 V~ pc 82.40 pc pre-fitted in Side pre-fitted anodised aluminium in anodised aluminium mountings vertical mountings pedestrian door, vertical profile for Alu, in black, SMDOL12° pc nominal L 1200 x H 2500 mm max

SMLAB3BS SMLAB3BS Base for LABSide Base 3C pedestrian for LAB 3Cdoor, profile for Alu, in black, pc 12.90 pc SMDOL14° pc nominal L 1400 x H 2500 mm max SMLAB3BS SMLAB3BS Base for LABBase 3C for LAB 3C pc 12.90 pc Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and SMDOL8T° NOGAL colours, black aluminium perimeter profile, pc L 800 x H 2500 mm max Pair of infra-red Pairphotocells of infra-red inphotocells special IP55 in container special IP55 forcontainer outside fitting for outside fitting SMLAB4AY SMLAB4AY Side fitted pedestrian door, with GROOVED FLAT panels in TEAK pc and 87.00 pc with direct rear with ordirect side attachment rear or side attachment SMDOL12T° NOGAL colours, black aluminium perimeter profile, pc Pair of infra-red special IP55 container forcontainer outside fitting Pair photocells of infra-redinphotocells in special IP55 for outside fitting SMLAB4AY SMLAB4AY L 1200 x H 2500 mm max pc 87.00 pc with direct rear side attachment withordirect rear or side attachment Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and SMDOL14T° NOGAL colours, black aluminium perimeter profile, pc L 1400 x H 2500 mm max SMLAB4CB SMLAB4CB Anodised aluminium Anodisedvertical aluminium mounting vertical H 500 mounting mm forHLAB 500 4mm for LAB 4 pc 34.00 pc Painting for pedestrian side door and any overhead clearance: RAL pc SMVEDOL SMLAB4CB SMLAB4CB Anodised aluminium mounting H mounting 500 mm for 4 for LAB 4 pc 34.00 Anodised aluminium vertical H LAB 500 mm pc 9010, RALvertical 6005, RAL 8014 and RAL 9006

82.40 1,050.00 82.40 1,125.00 12.90 1,179.00 12.90 1,071.00 87.00 1,179.00 87.00 1,234.00 34.00 174.00 34.00

pc

15.00 pc

15.00

pc

pc 15.00 pc

15.00 267.00

SMGPFM

SMGPFM Pair of base plates Pair offor base DSS plates device forwith DSSmobile devicephotocells with mobile photocells pc 8.00 pc Insulated overhead clearance with aluminium surround profile, in SMOHP815 pc L 800 H 1500 mmphotocells maxmobile photocells SMGPFM Pair ofnominal base plates forxwith DSS device with pc Pair of base black, plates for DSS device mobile pc 8.00

8.00 437.00 8.00

SMSSSOF

SMSSSOF Surcharge forInsulated Surcharge SOF safety forribSOF to be safety usedrib fortoL800 automatic be used for versions automatic versions m SMOHP14 overhead clearance x H650 mm

71.00 m pc

71.00 437.00

SMSSSOF SMSSSOF Surcharge for Surcharge SOF safety forrib SOF to safety be used ribfor to automatic be used forversions automatic versionsm 71.00 m Insulated overhead clearance with aluminium surround profile, in SMOHP1215 pc black, nominal L 1400 x H 1500 mm max Buttons, selector Buttons,switches selector switches

71.00 726.00

Overhead clearance (not available with CASSETTE model panels)

Basemounting for vertical mounting SMLAB4BS SMLAB4BS Base for vertical LAB 4CB LAB 4CB SMOHP8 Insulated overhead clearance L800 x H650 mm

SMGPFM

Overhead clearance thermally insulated with GROOVED FLAT panels in Buttons, Buttons, selector switches selector switches

SMXEL5

SMOHP8T TEAK and3-button NOGAL colours, black aluminium profile, pc SMPT3 Optional 3-button Optional (open-close-stop) (open-close-stop) push-button push-button unit for perimeter E1A unit for E1Apc 25.80 pc L 800 x H 650 mm max SMPT3 Optional 3-button Optional (open-close-stop) 3-button (open-close-stop) push-button push-button unitwith for E1A unit forFLAT E1Apc pc Overhead clearance thermally insulated GROOVED panels in25.80 SMOHP14T TEAK and NOGAL colours, black aluminium perimeter profile, pc 1400 x H 650key-operated mm maxswitch, SMXEL5 Vandal-proof selector switch,fitting for external fittingpc pc Vandal-proofL key-operated selector for external 39.20

25.80 452.00 39.20

SMXEL5

SMXEL5 Vandal-proofVandal-proof key-operatedkey-operated selector switch, selector for external switch, fitting for external fittingpc

39.20 pc

39.20

Open - close Open push-button - close push-button unit unit SMPAC (to be used only (to be with used automatic only with versions) automatic versions) Open - closeOpen push-button - close push-button unit unit SMPAC (to be used only (to be with used automatic only withversions) automatic versions)

pc

45.00 pc

45.00

pc

45.00 pc

45.00

pc

69.00 pc

69.00

pc

69.00 pc

69.00

SMPE Electrical push-button Electrical push-button

pc

36.00 pc

36.00

SMPE Electrical push-button Electrical push-button

pc

36.00 pc

36.00

SMPT3

SMPT3

SMPAC

SMPAC

SMPSE

SMPSE

SMPE

SMPE

Additional emergency Additionalstop emergency push-button stop push-button unit unit SMPSE with retentionwith (to be retention used only (to be with used automatic only with versions) automatic versions) Additional emergency Additionalstop emergency push-button stop push-button unit unit SMPSE with retention with (toretention be used only (to be with used automatic only withversions) automatic versions)

60

37

SM-EXP-GB-February 2013 issue SM-EXP-GB-February 2013 issue 31 37

37

SM-EXP-GB-February SM-EXP-GB-February 2013 issue 2013 issue 37

Thisand Price List cancels and replaces This Price List cancels replaces previous ones. previous ones.

276.00 25.80

The technical data shown this Price List are List not binding. For more details, The technical datainshown in this Price are not binding. For more details, refer to the leaflets and Technical manuals, also available from thefrom website: www.ditecentrematic.com referrelevant to the relevant leaflets and Technical manuals, also available the website: www.ditecentrematic.com

MLAB4BS SMLAB4BS Base for vertical Basemounting for vertical LAB mounting 4CB LAB 4CB

The technical datainshown in this Price are not binding. For more details, The technical data shown this Price List are List not binding. For more details, referrelevant to the relevant leaflets and Technical manuals, also available the website: www.ditecentrematic.com refer to the leaflets and Technical manuals, also available from thefrom website: www.ditecentrematic.com

° When the door is open, the door passage PH is reduced by 50 mm and PL by 100 mm


1300 780 450

Docks

Product Range > Doors

Accessories Accessories Accessories

For Panel Lift Doors Intro 4

Accessories Accessories IndicatorIndicator devices devices

Large Doors 8

Indicator devices

Description Description

U.o.M.

SMLAMP SMLAMP Flashing lights Flashing 230 Vlights ~ for E1A 230 control V ~ for E1A panel control for automatic panel forversion automatic version pc

43.30 pc

IndicatorIndicator devices devices Code

Description Description

Code

U.o.M.

Unit U.o.M. price

24 Vlight ~ flashing light for three phase-automatic 24 V ~ flashing for three phase-automatic version withversion DOD15with and DOD15 and pc SMLAMPH SMLAMPH pc 37.10 control control panel 49E panel 49E SMLAMP SMLAMP Flashing lights 230 Vlights ~ for E1A control panel for automatic pc 43.30 Flashing 230 V ~ for E1A control panel forversion automatic version pc

Side pedestrian doors

SMLAMPSP1 SMLAMPSP1 Wall mounting Wallbracket mounting bracket pc 19.60 pc 24 V ~ flashing for three phase-automatic version withversion DOD15with and DOD15 and 24 Vlight ~ flashing light for three phase-automatic SMLAMPH SMLAMPH pc 37.10 pc control panel 49E panel 49E control

Miscellaneous Miscellaneous

SMDMP

Description

U.o.M.

SMDMP Surcharge for Surcharge DOD motor for DOD provision motor provision pc 33.00 pc Side pedestrian door, profile for Alu, in black, SMDOL8° PCB holderPCB with holder internal or external mounting - suitable a LAN for a LAN pc with internal or externalbox mounting boxfor - suitable SMCONT1 SMCONT1 nominal L 800 x H 2500 mm max pc 16.50 pc 7S board or7S other board or other Vertical manual Vertical release manual system release for motor systemlocated for motor < Hlocated 5,0 m from < H 5,0 them from the SMDODSBC SMDODSBC Side pedestrian door, profile for Alu, in black, pc 112.00 pc ground ground SMDOL12° pc nominal L 1200 x H 2500 mm max SMDMP SMDMP Surcharge for DOD motor provision pc 33.00 Surcharge for DOD motor provision pc Side pedestrian door, profile for Alu, in black, SMDOL14° pc nominal L 1400 x H 2500 mm max Extension chain Extension for SBC chain manual for SBC release manual system release for system for SMDODLCG SMDODLCG pc the 31.00 pc Vertical manual release system forfrom motor < Hlocated 5,0 m from them from Vertical manual system for motor < H 5,0 motor located motor <fitted 9.0located mpedestrian from <release the 9.0 m ground thelocated ground Side door, with GROOVED FLAT panels in TEAK SMDODSBCSMDODSBC pcand 112.00 pc ground ground SMDOL8T° NOGAL colours, black aluminium perimeter profile, pc

L 800 x H 2500 mm max Side fitted pedestrian door, with GROOVED FLAT TEAK and the Vertical manual Vertical release manual system release for motor system located for motor <H located 4.5 panels m from < H in 4.5 the m from SMDODSBVSMDOL12T° SMDODSBV NOGAL colours, black aluminium perimeter profile, pc 65.00 pc pc ground ground Extension chain for SBC manual release system for system for Extension chain for SBC manual release SMDODLCGSMDODLCG L 1200 x H 2500 mm max pc 31.00 pc motor located < 9.0 m from the m ground motor located < 9.0 from the ground Side fitted pedestrian door, with GROOVED FLAT panels in TEAK and NOGAL colours, black profile, pc SMMN3 SMDOL14T° SMMN3 Manual door Manual operating doorrod operating L 3000aluminium mm rod L 3000perimeter mm pc 29.00 pc L 1400 x H 2500 mm max Vertical manual release system for system motor located < Hlocated 4.5 m from them from the Vertical manual release for motor < H 4.5 pc 65.00 SMDODSBVSMDODSBV pc Painting ground ground for pedestrian side door and any overhead clearance: RAL SMVEDOL pc Manual release Manual system release drive system with L drive 3000 with mm L extension 3000 mm for extension motor for motor SMDODSBRINSMDODSBRIN9010, RAL 6005, RAL 8014 and RAL 9006 pc 111.50 pc located > H located 4,5 m from > H the 4,5 m ground from the ground SMMN3

15

High Speed

62

PVC 81

43.30

DockBrain 86

Unit price

Dock Intro 92

37.10 43.30

Leveller 95 Drawbridge 99

19.60

Seals 103

37.10

Barriers 106

PCBmounting holderWall PCB with holder internalwith or external internal or mounting externalbox mounting - suitable boxfor - suitable a LAN pc for a LAN19.60 SMLAMPSP1 Wall bracket mounting bracket pc SMCONT1 SMLAMPSP1 SMCONT1 pc 16.50 pc Locks, door closers, handles, releaseswith and hardware 7S board or 7S other board or other Side pedestrian doors (not available CASSETTE model panels) Code Miscellaneous Miscellaneous

Panel Lift

Manual operating L passage 3000 mm pc Manual operating rod mmby 50 mm and PL by 100 mm °SMMN3 When thedoor door is open,door therod door PHLis3000 reduced

29.00 pc drive SBRIN for drive motorfor located motor located pc 35.00 pc

Extension Extension for DOD for SBRIN DOD SMDODSBP SMDODSBP > H 7.5 m from > H the 7.5 m ground from the ground Overhead clearance (not available with CASSETTE model panels) Manual release system drive with L 3000with mmL extension motor for motor Manual release system drive 3000 mm for extension SMDODSBRINSMDODSBRIN pc 111.50 pc located > H located 4,5 m from the m ground > H 4,5 from the ground SMOHP8 Insulated overhead clearance L800 x H650 mm pc Extension Extension for DOD for SBRIN motorfor located DOD drive SBRIN for drive motor located in 35.00 SMDODSBPSMOHP815 pc SMDODSBP Insulated overhead clearance with aluminium surround profile, pc > H 7.5 m from the ground > H 7.5 m from the ground black, nominal L 800 x H 1500 mm max

19.60 16.50

Ramp 107

Unit price

Structures 108

33.00

Shelters 109

1,050.00 16.50 112.00 1,125.00 33.00 1,179.00 31.00 112.00 1,071.00 65.00 1,179.00 31.00

DODSBV

Scissor Lift 110 Freight Hoists 113

DOD SBC

DOD SBC

DOD LCG

DOD LCG

Code Index

DOD SBC

DOD LCG

1,234.00 29.00

DOD SBC

DODSBV

DODSBRIN

DODSBRIN DODSBP

DODSBV

DODSBV

65.00 174.00 111.50 DODSBRIN MN3

29.00

O F F

DOD LCG

DODSBP

DODSBRIN MN3 DODSBP

O F F

35.00 111.50 267.00 MN3

35.00 437.00

SMOHP14

Insulated overhead clearance L800 x H650 mm

pc

437.00

SMOHP1215

Insulated overhead clearance with aluminium surround profile, in black, nominal L 1400 x H 1500 mm max

pc

726.00

SMOHP8T

Overhead clearance thermally insulated with GROOVED FLAT panels in TEAK and NOGAL colours, black aluminium perimeter profile, L 800 x H 650 mm max

pc

O F F

MN3

O F F

DODSBP

61

276.00

ils, a shown in this Price List are not binding. For more details, The technical data shown in this Price List are not binding. For more details, entwebsite: leaflets www.ditecentrematic.com and Technical manuals, also available from the website: www.ditecentrematic.com

Code

Unit price

ta shown in this Price List are not binding. For more details, The technical data shown in this Price List are not binding. For more details, nt leaflets and Technical manuals, also available from the website: www.ditecentrematic.com refer to the relevant leaflets and Technical manuals, also available from the website: www.ditecentrematic.com

Code

Unit U.o.M. price


Product Range > Doors High Speed Doors Sector Reset

Description

Smart Reset

Sector Plus

Smart Plus

Flash CS Traffic C Traffic CM Energy

FLEXIBLE CURTAIN Standard see-through PVC window section, 980 x H 300, for full curtain Super see-through PVC window section, 920 x H 1600

(excluding insulated curtain) High Speed Doors are simple and easy to adapt Window sections in fine micro mesh to the most diverse requirements and guarantee Double PVC see-through window section 980 x H 300 functionality, safety and efficiency, in full for full curtain compliance with regulatory requirements. Entire curtain of 900 g/m2 - approx. 0.7 mm thick They provide simple and rapid access with modular g/m2 - approx. 0.7 mm andCurtain optimise thesections flow for of 900 people, goods thick (Sector and Smart PH max 5000) or equipment and products. See-through PVC modular section Fast opening speeds shorten the passage time, See-trough PVC curtain with central red warning strip improving efficiency and reducing heat loss by (≤ PL 3000 x PH 3400) minimizing opening times. 2 Non-tear full polyester curtain of 1200 g/m approx. 1 mm thick in blue, grey and red

Insulated curtain Ug 4.0 W/m2, K 3.5 mm thick in blue and grey Eco white RAL 9010 for polyester curtain - for food use Supplement for version with 4a reinforcement strip Polyester roll-up curtain special colour (subject to confirmation)

ACCESSORIES

Door types

Rolling

Magnetic loop Radar

Sector Reset

Folding

F F F F F F

F F

433 MHz transmitter and receiver

Photocells Smart Reset Buttons

Sector Plus

Interlock

Traffic lights, red and green

Smart Plus

Self repair

Counterweight

Stocked by Leda

F F F

Emergency devices: supplemental release devices Emergency devices: automatic anti-panic system for set-ups without INVERTERmotion (only for Traffic and Traffic CM): PH > 4000 mm)

Flash CS

Wash down

Emergency devices: UPS only with INVERTERmotion: (only for Smart: PL max 4000 x PH 4600 and full curtain) Cycle counter kit

Traffic C

Protection in RAL 1023 yellow

Traffic CM

Heating system for installations ≤ -20°C optional Energy

KEY:

standard

F F

F F F

F F

F

Passive edge safety

Opening speed

F F F F F F F F F

1

(m/s)

0.8 1 0.8 1 1.5 0.7 - 1 0.7 0.7

Curtains - Standard available colours

Red Red

Simil RAL 3000

Blue Blue

Simil RAL 5010

Orange Orange Simil RAL 2004

**Red* is the *standard* color curtain

Grey Grey

Simil RAL 7038

Yellow Yellow

Simil RAL 1021

Green Green

Simil RAL 6026

Cream Cream

Simil RAL 1014

Curtains - Standard available colours

White White

Simil RAL 9010

Light blue Light Simil blue RAL 5012

Black Black

Simil RAL 9005

OTHER COLOURS UPON REQUEST

62 Rapid doors | 27


1300 780 450

Product Range > Doors Sector Reset Product code : LHSDSER

Self-repairing system Very high traffic areas Sturdy, with safe and reliable performance Fast passage High wind resistance without compromising safety

The Sector Reset door is characterised by a sturdy compact and free-standing structure, by a front motor with black ABS protective cover in an exclusive design, easily and quickly accessible for quick checks on the components. The motor features an optional release device for a semiautomatic emergency reopening system, which can be made completely automatic with the APS system. Sector Reset is noted for a series of significant levels of safety such as the balancing system, the Safety Linear Encoder, (SLE), system and the sequential barriers. The exclusive SLE, Patent Pending, device constantly controls the movement of the curtain reversing the closing motion in case of obstacles. The sequential safety barriers protect the closing line of the door blade up to a height of 2.5 m, making the installation of other photocells or bottom safety edges unnecessary. Tight-sealing, safe, flexible, self-repairing curtains. The curtain slides inside the side hinges making it very resistant to air and static wind pressure (up to 120 km/h). Available in a wide range of colours, it can be provided with standard transparent PVC windows and optional larger windows configured as needed, to meet a vast range of operating and safety requirements. In addition, there is the possibility of creating partial or total silk-screens and digital prints, to meet the specific requirements of particular commercial environments.

Docks

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

63


Product Range > Doors Sector Reset Product code : LHSDSER

Dimensional specifications 475

***

*15

400 When taking measurements, consider the lateral space required *15 mm per side

HT

If installing in span, consider: ** = 25 mm *** = 50 mm

200

1800

PH

H

200 300

Self Repairing Limit

115

PL

**

LT

Optional photocell with safety package

185 **

190

300

140

L

515 Automation dimensions PL PH

Min 900 1700

Key

Max 6000 5000

L = Width side wall

LT = Automation full width

PL = Horizontal opening

H = Height side wall

HT = Automation full height

PH = Vertical opening

Full curtain STANDARD WINDOW SECTIONS (980 x H 300)

*OPTIONAL

4500

6

4000

5

3500

4

3000

3 2

2500 2000

1

1500

300

5000

7

900

8

200

Window Up to position PH

980

1000 PL ≥ 1200 - PL ≤ 2250

PL > 2250 - PL ≤ 2560

PL > 2560

PL > 3750

PL > 4950

* option available only with 1 or 3 window sections and PL > 3750 *OPTIONAL

600

1600

LARGE WINDOW SECTIONS (920 x H 1600) applicable in the PH range price list Note: for PH < 2000 part of the window section winds into the transom

PL ≥ 1200 - PL ≤ 2250

64

PL > 2250 - PL ≤ 2560

920 PL > 2560

PL > 3750

PL > 4950


1300 780 450

Product Range > Doors Smart Reset Product code : LHSDSMR

Self-repairing system High traffic areasFast passage Limited space Quick reaction High wind resistance without compromising safety

Docks

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81

Smart Reset offers something unique in its product class: the special and innovative system that makes the door self repairable. With a simple and automatic opening and closing manoeuvre, the curtain can be retrieved if it accidentally slips out of its housing: after contact with an object, the door resets the first time it is opened.

Dock Intro 92

Maximum functionality with the special self-repairing system

Leveller 95

The Ditec Smart Reset roll-up door has a sturdy and compact supporting structure, a motor mounted outside the door, easily and quickly accessible for inspection, and components that are well-designed and thoroughly tested. These key features make this door an aesthetic, pragmatic solution which is easy and quick to assemble, safe and reliable.

DockBrain 86

Drawbridge 99 Seals 103 Barriers 106

The door can be equipped with the INVERTERmotion system, the exclusive electronic SLE device, and can also be opened manually with an emergency device with a crank handle usable from the ground. Ramp 107 The multiple solutions offered allow the various operational requirements and the different regulations of specific sectors of application to be met, guaranteeing good visibility and improving safety during passage.

Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

65


Product Range > Doors Smart Reset Product code : LHSDSMR *250 180

SLE

Dimensional specifications LT = (PL + 380)

**

330

330

620

200 Self Repairing Limit 400

PL

100

60

100

When taking measurements, consider: ** = 50 mm

360 Automation dimensions PL PH

Min 900 1000

Max 4500 4600

200

PH

HT

530

For motor installation: * = 250 mm

Key LT = Automation full width

PL = Horizontal opening

HT = Automation full height

PH = Vertical opening

Full curtain STANDARD WINDOW SECTIONS (980 x H 300)

*OPTIONAL

4500 4000

5 4 3 2

3500 3000 2500 2000

1

1500

300

4600

7 6

900

8

200

Window Up to position PH

1000

980 PL ≥ 1200 - PL ≤ 2250

PL > 2250 - PL ≤ 2560

PL > 2560

* option available only with 1 or 3 window sections and PL > 3750 *OPTIONAL

600

1600

LARGE WINDOW SECTIONS (920 x H 1600) applicable in the PH range price list Note: for PH < 2000 part of the window section winds into the transom

PL > 3750

PL ≥ 1200 - PL ≤ 2250

66

PL > 2250 - PL ≤ 2560

920 PL > 2560

PL > 3750


1300 780 450

Product Range > Doors Sector Plus Product code : LHSDSEP

Safe and reliable, high performance Very heavy-duty use Aesthetic flexible curtains

Docks

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

Sector Plus is sturdy, reliable and safe, it is the ideal automatic door for areas that have to quickly handle passage of goods or people, both inside buildings and for areas of transit to the outside. PVC 81 The INVERTERmotion systems offers differentiated speed settings, acceleration and braking, high DockBrain 86 performance and safety. It can be easily adapted to every type of context both industrial and commercial, where the speed of access is important: supermarkets, car dealers, warehouses, logistics centres and production plants. The built-in motor operates at the lowest possible power, conserving energy and prolonging operator life. Its hidden position allows even problems of an aesthetic type to be resolved without reducing the width of passage.

Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

67


Product Range > Doors Sector Plus Dimensional specifications

Product code : LHSDSEP

* 15

***

* 15

* 15

PH

Optional photocell

**

PL

170

170

LT

If installing in span, consider: ** = 25 mm *** = 50 mm

**

280

Optional photocell with safety package

200

When taking measurements, consider the lateral space required: * = 15 mm per side

1000

1800

H

HT

290 200

L

260

440

Automation dimensions PL PH

Min 900 1700

Key

Max 6000 6000

L = Width side wall

LT = Automation full width

PL = Horizontal opening

H = Height side wall

HT = Automation full height

PH = Vertical opening

Full curtain Window position

PH max

7

6000

970

6

5710

970

5

970

Modular curtain Sections position

PH max

930

6

5000

4740

930

5

4100

4

3770

930

4

3200

970

3

2800

930

3

2300

970

2

1830

930

2

970

1

910

1

110

Quantity window sections per sector Singl e or doubl e

Standard window section

Double window

110

Max. number of optional see-through PVC sections (Sections position selected by customer according to diagram)

PL ≤2250

≤3750

≤5000

≤6000

1

2

3

4

PH ≤ 5000 max 6 PL ≤ 5000

Note 1: only the last top section cannot have a window section regardless of the number of sections and PH of the curtain Note 2: with PL < 1100 no window section is available

68


1300 780 450

Docks

Product Range > Doors Smart Plus Product code : LHSDSMP

Simple and compact for fast access Medium traffic Limited space Aesthetically styled

Smart Plus is a fast door characterised by rationality, compactness and modularity: these features facilitate their installation and allow operations to be performed without difficulty on all its components. The extremely small sizes allow installation even where there are problems of space.

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81

Made to size

DockBrain 86

here in Australia

Dock Intro 92

The fast Smart Plus doors are not only practical, but also aesthetically pleasing.

Leveller 95 Drawbridge 99

In addition to the version with complete curtain, the modular one may be chosen combing the different Seals 103 colours available to the transparent central sector. The motor, outside the structure of the door, guarantees maximum performance and easy inspection.

Barriers 106

Upon request, the motor can be equipped with an INVERTERmotion system, ensuring both high performance and safety. The SOFT START and SOFT STOP functions, being part of the system, reduce stress on mechanical parts, ensuring reliability while prolonging the lifetime of the door.

Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

69


Product Range > Doors Smart Plus Dimensional specifications

Product code : LHSDSMP

LT = (PL + 430)

**

***250 220

* 50

Optional casing

330 200

620

* 50

80

550

PH

HT

130

PL

80

190

80

360

When taking measurements, consider: * = 50 mm ** = 50 mm For motor installation: *** = 250 mm

Automation dimensions PL PH

Min 900 1700

Optional photocell with safety package

200

1000

Optional photocell

Key

Max 6000 6000

LT = Automation full width

PL = Horizontal opening

HT = Automation full height

PH = Vertical opening

Full curtain Window position

PH max

7

6000

970

6

5710

970

5

970

Modular curtain Sections position

PH max

930

6

5000

4740

930

5

4100

4

3770

930

4

3200

970

3

2800

930

3

2300

970

2

1830

930

2

970

1

910

1

110

Quantity window sections per sector Singl e or doubl e

Standard window section

Double window

110

Max. number of optional see-through PVC sections (Sections position selected by customer according to diagram)

PL ≤2250

≤3750

≤5000

≤6000

1

2

3

4

PH ≤ 5000 max 6 PL ≤ 5000

Note 1: only the last top section cannot have a window section regardless of the number of sections and PH of the curtain Note 2: with PL < 1100 no window section is available

70


1300 780 450

Product Range > Doors Flash CS Product code : LHSDFCS

Safe and efficient operation Excellent seal Comfortable light High aesthetic effect

Flash CS is fast, reliable and compact, adapts easily to every context, both industrial and commercial. The version with see-through curtain is particularly suitable for internal rooms and display areas, ensuring the highest level of safety for cross-traffic. Sturdy, reliable and safe, Flash CS is the ideal automatic fast door for areas with fast movement of goods and people. The extremely small sizes allow installation even where there are large problems of space. Compact and technologically advanced, it has a modular counterweighted balancing system with strong traction belts, ensuring safe, simple and reliable operation, and extending the lifetime of the door. Upon request, the motor can be equipped with the INVERTERmotion system for different speeds,acceleration and braking. The motor, built in for perfect aesthetics, always works with minimum effort, lengthening the operational life of the automation. The flexible curtain of the Flash CS fast door is available in the transparent version with a central red vertical warning strip or in the coloured version with a large transparent rectangular window section. This window section permits the most diverse operating requirements to be met, ensuring better visibility and improving safety when going through the door. The brushes built into the columns ensure a very high level of air-tightness.

Docks

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

71


Product Range > Doors Flash CS Dimensional specifications

Product code : LHSDFCS

* 15

***

* 15

* 15

PH

H

HT

290 200

**

PL

220

220

LT

260

**

Optional photocell with safety package

200

When taking measurements, consider the lateral space required: * = 15 mm per side If installing in span, consider: ** = 25 mm *** = 50 mm

1000

1800

Optional photocell

L

260

440

Automation dimensions PL PH

Min 1000 1600

Key

Max 4000 4000

L = Width side wall

LT = Automation full width

H = Height side wall

HT = Automation full height

PL = Horizontal opening PH = Vertical opening

Full curtain Polyester curtain with PVC window

Entire curtain in PVC

� PL 3000 x PH 3400

� PL 4000 x PH 4000

B

510

380

=

130

A PL

PL

≤1400

>1400

A

720

920

≤1900

≤2500

>2500

1000

1500

2000

PH B

72

=

130

PL


1300 780 450

Product Range > Doors Wash down

Clean and disinfect Not affected by humidity or detergent Prevent dirt from collecting The wash down door is ideal when hygiene and practicality are the most important prerogatives. In addition to applications in the food sector such as processing meat, fish, dairy and confectionery products, fruit and pasta, the wash can be used in warehouses, supermarkets and car washes. The door reduces drafts, loss of heat, noise pollution and dust. The fast opening (up to 1.5 m/s) and closing speeds and its compact size make it possible to optimise the flow of people, trolleys and vehicles. It has a self-repairing system capable of automatically resetting the door after being bumped accidentally which might cause the curtain to slip out of the side tracks: a simple opening and closing manoeuvre is all that is needed, automatically. The self-repairing system and the innovative safety rib keep the curtain and merchandise intact during transit, cancelling down times and the inconveniences due to the maintenance operations necessary if the curtain is damaged.

Docks

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108

Maximum cleanliness - Structure in completely washable composite material, easy to clean and water repellent, which reduces the visibility of the drying spots - Smooth exterior surface with shiny finish which prevents dust build-up - Curtain features specialised upper sealing system - Draining structure with precision joints which avoids contaminating agents from

collecting - Polyester tear-resistant flexible curtain resistant to pressure washing

Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

Compactness - Motor built into the roll-up shaft which allows the available light space to be used to the maximum - Extremely compact load-bearing structure, for optimal management of the passage area - Smaller surfaces exposed to the build up of dirt

High security - Flexible curtain passable in both directions - Shockproof safety edge with wireless system: innovative active safety system, with a complete shockproof edge covered in polyester in the same colour as the curtain, to protect people and vehicles in case of accidental contact. Wireless transmission system in IP65 container - Special joints and fasteners with secure, captive connections - IP67 safety photocells built into the vertical frames (Top version) system of optical sensors which stop the closing motion of the door should vehicles or people be detected. Ensures greater safety and less risk of damage to the door - Emergency reopening device which can be activated with the manual operation rod installed to be used in case of lack of power (optional)

73


Product Range > Doors Wash down Dimensional specifications

Transom fastening

L2 = PL + 535 L1 = PL + 500 100

LT2 = PL + 335

100

LT1 = PL + 300

100 372 100 355

Transom fastening

170

L1 = PL + 500 100

LT2 = PL + 335

100

LT1 = PL + 300

100 372 100

PH max. 200 PL

PH

Safety photocells

150

150

max. 200

Base plate fastening

H = PH + 630 HT = PH + 530

Base plate fastening

355 170

H = PH + 630 HT = PH + 530

Key H Height side wall HT Automation full height L1 Width side wall without release L2 Width side wall with release LT1 Total automation width without release LT2 Total automation width with release PL Horizontal opening Key Height side wall PH H Vertical opening HT Automation full height L1 Width side wall without release AUTOMATION DIMENSIONS L2 Width side wall with release min automation max LT1 Total width without release PL LT2 Total 900 automation 4000 width with release opening PH PL Horizontal 1700 4000 PH Vertical opening When taking measurements, consider the lateral space required 100 mm per side, AUTOMATION DIMENSIONS 100 mm height clearance min max PL 900 4000 PH 1700 4000

L2 = PL + 535

372 Safety photocells

When taking measurements, consider the lateral space required 100 mm per side, 100 mm height clearance

PL

150

150

372

Flexible curtain features (maximum values) Position Sectors

PH MAX

6

4000

600

600

600

5

3500

600

600

600

4Position 2900PH Sectors MAX

600

600

3

6 23004000

600 600

600600

600600

2

5 17003500

600 600

600600

600600

4 11002900

600 600

600600

600600

325

325 600

325 600

3

2300

2

1700 1100

A

A

A

600

PL < 2420 600 - 2 standard reinforcements 600- 1 row of optional windows (PL minimum 1300) 325

A

A

PL ≥ 2420 < 3560 600 - 3 standard reinforcements 600- 2 rows of optional windows 325

600

600

A

PL ≥ 3560 ≤ 4000

- 4 standard reinforcements 600 - 3 rows of optional windows 325

< 2420 PLhave ≥ 2420 3560 section regardless of the number PL ≥ 3560 ≤ 4000 Note 1: thePL first and last top section "A" cannot a< window of sections and height of the curtain - 22:standard - 3 standard reinforcements - 4 standard reinforcements Note with PL <reinforcements 1300 no window section is available - 1 row of optional windows - 2 rows of optional windows - 3 rows of optional windows (PL minimum 1300) Note 1: the first and last top section "A" cannot have a window section regardless of the number of sections and height of the curtain Note 2: with PL < 1300 no window section is available

74

143

143


1300 780 450

Product Range > Doors Traffic C Product code : LHSDTC

Docks

Reliable, fast and safe access in medium and Intro 4 large entrances Speed setting with the optional INVERTERmotion system Large Doors 8 Copes with high wind loads without compromising safety Panel Lift 15 Internal and external entrances High Speed

Traffic C is a door with sturdy, reliable and safe folding, capable of offering fast access. The door is suitable for medium Made to size to large entrances and works with ease during the most diverse conditions, including in entrances exposed to wind and here in Australia in special conditions such as low-pressure rooms. It has a builtin motor, fully concealed in the frame. The motor operates at the lowest possible power, conserving energy and prolonging operator life. Has a modular counter weighted balancing system with strong drive belts ensuring safe, smooth and reliable operation.

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106

The solution of the sequential safety barriers, specifically designed to be mounted near vertical Ramp 107 runners, translates into an additional instrument in terms of reliability. Upon request, Traffic C can be equipped with the INVERTERmotion system which provides different speeds, acceleration and braking. The SOFT START and SOFT STOP functions, being part of the system, reduce stress on mechanical parts, ensuring reliability while prolonging the lifetime of the door. They are ideal for providing quick access to vehicular traffic, and the rapid opening and closing times which minimize indoor temperature changes. Suitable for windy conditions, the curtain comes in several wind resistant versions that can handle up to 120 km/h static wind pressure resistance.

Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

75


Product Range > Doors Traffic C Product code : LHSDTC Dimensional specifications L LT

190

PH ≤ 4500

PH > 4500

700

750

PH

H

*

HT

**

PL

170

170

280

280

If installing in span, consider: * = 20 mm ** = 50 mm

Optional photocell with safety package

200

1000

1800

Optional photocell

Automation dimensions Min Max PL 1500 6000 PH 2000 5500

Key L = Width side wall H = Height side wall

LT = Automation full width HT = Automation full height

PL = Horizontal opening PH = Vertical opening

Full curtain Window position

12

5500

500

11

5000

500

10

4500

500

9

4000

500

8

3500

500

7

3000

500

6

2500

500

5

2000

500

4

500

3

500

2

380

1

110

Quantity window sections per sector Windows

Sections position

PH max

930

7

5500

930

6

4800

930

5

3900

930

4

3000

930

3

2100

930

2

910

1

110

Max. number of optional see-through PVC sections (Sections position selected by customer according to diagram)

PL ≤2250

≤3750

≤5000

≤6000

1

2

3

4

PH > 4500

PH ≤ 4500 Note: only the first bottom and last top sections cannot have a window section, irrespective of the number of sectors and PH of the curtain

76

Modular curtain

PH max

max 2 (PL ≤ 6000)

max 1 (PL ≤ 6000)

Note: modular PVC see-through section can be placed on all sections, except the highest


1300 780 450

Product Range > Doors Traffic CM Product code : LHSDTCM

Docks

For large entrances Reliable functionality for entrances in diverse conditions, Intro 4 including windy areas Large Doors 8 Reliable, fast and safe Special conditions like strong winds and low pressure rooms Panel Lift 15 Internal and external entrances High Speed

The Traffic CM door is a sturdy, reliable and safe solution suitable for large entrances. It is the best solution for external entrances exposed to wind and in special conditions such as low pressure rooms. It features a built-in structure housing the motor, a counte rweight balancing system, control and safety devices and a fast semi automatic reopening device. The counterweighted balancing system ensures high operating standard in terms of performance and safety. Maximum operational safety is also ensured by photocell sensors in the frame and the special bottom edge. Traffic CM has a motor that operates at the lowest possible power, conserving energy and prolonging the operator life. It is supplied with 1 or 2 motors depending on its size.

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108

The vertical movement of the door blade is done with lifting belts which raise and progressively Shelters 109 gather the different sections in the upper part of the door. The transparent window sections guarantee better visibility and more safety for those passing through the door or working near Scissor Lift 110 it. Freight Hoists 113 Code Index

77


Product Range > Doors Traffic CM Product code : LHSDTCM Dimensional specifications

* 15

* 15

200

***

* 15

PH

H

700 850 950 1100 1200

HT

PH ≤ 4500 PH ≤ 6000 PH ≤ 7000 PH ≤ 8000 PH > 8000

**

PL

220

220

**

LT

Optional photocell with safety package

200

When taking measurements, consider the lateral space required: * = 15 mm per side If installing in span, consider: ** = 25 mm *** = 50 mm

1000

1800

Optional photocell

380

380

L

Automation dimensions Min Max PL 1800 11000 PH 2710 7000 (8500 with PL max 9000)

Key L = Width side wall H = Height side wall

LT = Automation full width HT = Automation full height

PL = Horizontal opening PH = Vertical opening

Full curtain Sections position

Curtain up to PH > 6000 (PL max 11000)

13 12 11 10 9 8 7 6 5 4 3 2 1

500 500 500 500 500 500 500 500 500 500 500 400

PH max

6000 5500 5000 4000 3500 3100

PL

1

2

3

4

5

6

7

600 600

600 600 600 600 500

PL Window

8 Sections position

13 12 11 10 9 8 7 6 5 4 3 2 1

700 700 700 700 700 700 700 700 700 700 600 110

78

600

600

≤2250 ≤3750 ≤5000 ≤6250 ≤7500 ≤8500 ≤9000 ≤11000

700

PL

600

Sections position

PH max

13 12 11 10 9 8 7 6 5 4 3 2 1

7000 6500

110

Curtain from PH > 7000 up to PH 8500 (PL max 9000)

Window

600

600

110

Window

Curtain from PH > 6000 up to PH 7000 (PL max 11000)

≤2250 ≤3750 ≤5000 ≤6250 ≤7500 ≤8500 ≤9000 1

2

3

4

5

6

7

≤2250 ≤3750 ≤5000 ≤6250 ≤7500 ≤8500 ≤9000 ≤11000 1

2

3

4

5

6

7

8

PH max

8500 7500

Nota 1: only the bottom first section and the last top section cannot have windows Nota 2: centre distance measurements are supplied for information only


1300 780 450

Product Range > Doors Energy Product code : LHSDE

Simple, practical and reliable fast access in medium and large entrances Special conditions like strong winds and low pressure rooms Complete curtains or flexible modulars Internal and external entrances

Energy is suitable for medium and large openings and entrances. A sturdy and compact supporting structure, in combination with well-designed and tested motor and components, ensure uncompromising quality. The small size allows them to be installed also in small spaces and their reliability guarantees their use in the most diverse conditions, also where there is wind or in areas with low pressure. The motor, mounted outside the door, is supplied complete with a manual emergency re-opening device. An optional convenient operation rod can be provided at a personâ&#x20AC;&#x2122;s average height. The outside-mounted motor comes to the left as standard but it is also available as an option to be mounted to the right. The motor upon request can be equipped with the INVERTERmotion system. Polyester lifting belts, highly resistant to wear and traction, allow the motor to operate in optimal stress conditions. Safety is also guaranteed thanks to the sequential barriers, a solution specifically designed to be mounted near the vertical runners which can protect the entire height of the door, up to 2.5 m, and detect people, vehicles and objects within the space, without any contact being necessary.

Docks

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

79


Product Range > Doors Energy Product code : LHSDE Dimensional specifications 190

LT = (PL+ 580)

*250 200

600

PH ≤ 4500 700

PH

HT

640

PH > 4500 750

For motor installation: * = 250 mm

1000

Optional photocell

215

310

190

200

PL

190

Optional photocell with safety package

Automation dimensions Min Max PL 900 6000 PH 2000 5500

Key LT = Automation full width HT = Automation full height

PL = Horizontal opening PH = Vertical opening

Full curtain Window position

PH max

12

5500

500

11

5000

500

10

4500

500

9

4000

500

8

3500

500

7

3000

500

6

2500

500

5

2000

500

4

500

3

500

2

380

1

110

Quantity window sections per sector Windows

Modular curtain

Sections position

PH max

930

7

5500

930

6

4800

930

5

3900

930

4

3000

930

3

2100

930

2

910

1

110

Max. number of optional see-through PVC sections (Sections position selected by customer according to diagram)

PL ≤2250

≤3750

≤5000

≤6000

1

2

3

4

PH ≤ 4500 Note 1: only the first bottom and last top sections cannot have a window section, irrespective of the number of sectors and PH of the curtain Note 2: with PL < 1100 no window section is available

80

PH > 4500 max 2 (PL ≤ 6000)

max 1 (PL ≤ 6000)

Note: modular PVC see-through section can be placed on all sections, except the highest


ilable.

anized specially

on spring plates; all

4102) g,

nds are uble

PVC curtain with strengthened borders, 1300 780 450 Transparent PVC < 3000 thickness = 5 mm, Product Range > Doors > 3000 thickness = 7 mm ALASKA PVC, transparent, for very low temperatures, thickness = 5 mm Grey and yellow PVC, flexible curtain,

thickness = 5 mm, available in the Flexible Flap door following versions: Easy and functional

- MIX, with lower skirting in painted PVC and transparent upper part Product code : L FDS -(1TRIS wing) (with three sections) with lower and head in painted PVC, LFDDskirting (2 wings) transparent central part - OBLO (with portholes) in coloured PVC Flap is a solid swing door with flexible wings. with portholes in yellow moplen

Sturdy and reliable structure Versatile in its three versions

pistons the ontrol actuate

lso nd stop

Flap

Intro 4 Large Doors 8

blackpassing rubber flexible Helps to save energyAnti-abrasion and make through faster. curtain, with 2 strengthening inserts in MIX and TRIS versions.

Structure

Drawbridge 99 Seals 103 Barriers 106

260

Ramp 107 Structures 108

and pneumatic devices, consisting of two pneumatic pistons with accessories are available in the following types:

Shelters 109

CONTACT CT. Push-button, 1. Standard, with push manual opening and two-directional, pneumatic device (CT with guiding plates and galvanized spring closing.

1 wing

steel casing, CT-Y with special guiding plates and stainless steel casing).

2. Contact, in semiautomatic version. AUTOMATIC AM. Mono-directional The door opens by a mechanical piston pneumatic device with pneumatic opening and spring closing, including placed on each wing, applying pressure electropneumatic control panel (AM with onto thecurtains; is casing, two-directional, guiding opening plates and steel AM-Y with special guiding plates and stainless closing isby spring. Flap Flexible steel casing). AUTOMATIC AMP. Mono-directional 3. Automatic, with a couple of pneumatic pneumatic device with pneumatic opening spring closing, including pistons placed in aandthrust position pneumatic logic control panel. compared to the opening, which, by means of a remote control actuate mono-directional Dimensions wing opening.

Scissor Lift 110

Code Index wing doors and flexible strip doors

Dimensions 1 wing Flap Basic

Min (mm)

Max (mm)

PL

750

2000

PH

2500

4500 Dimensions 2 wings Flap Basic

Wall opening width Wall opening height Pneumatic device height Flap height Automation total width Automation total height Horizontal clear opening Vertical clear opening CYLINDER Contact Ø 50 / Ø 63 Contact Ø 80 Automatic AM – AMD – AMP Ø 50 / Ø 63 Automatic AM – AMD – AMP Ø 80 / Ø 100 Automatic AB Ø 63 / Ø 100

2 wings

Freight Hoists 113

Servo-assisted FLAP

Dimensions Manual FLAP and Flexible wing doors and flexible strip doors Servo-assisted FLAP

62

Dock Intro 92

1500

260

Manual FLAP

High Speed

Leveller 95

It is available in a wide choice of (DIN 4102) totally transparent andTRIS self extinguishing, OBLO' Main technical features flexible curtains, or coloured PVC or Galvanized steel or satin-finish AISI 304 stainless steel frame for two-wing doors. anti-abrasion rubber; frame fastening ends are Spring closing mechanisms and floor strengthened with special polyester, double drains with ball-bearings. inserts.streng thened with RAL coating. Extraspecial charge for polyester, smooth, coating. double inserts. epoxide-powder FLAP servoassistance electropneumatic Versions

15

DockBrain 86

1300

Attainability

Panel Lift

PVC 81

PVC / ALASKA MIX Its rugged metal structure frame in galvanized steel or in stainless steel, consists of a specially shaped section which results in a high mechanical strength and elasticity.

d spring

placed he sing is

Docks

available in the following versions:

1300

wings. re it through ion: with ssisted umatic

Technical features of the curtain

Min (mm)

Max (mm)

PL

1500

4000

PH

2500

4500

81


Product Range > Doors Flexible Flap door

Easy and functional Sturdy and reliable structure Versatile in its three versions

Main technical features and technical features of the curtain

Technical features of the

Technical features of the curtain

- Galvanized steel or satin-finish AISI 304 curtain stainless steel frame for two-wing doors. PVC with strengthened - Spring closing curtain mechanisms and floorborders, available in the following versions: drains with ball-bearings.

PVC curtain with strengthened borders, available in the following versions:

Transparent PVC < 3000 thickness = 5 mm, - RAL coating. Extra charge for smooth, Transparent PVC < 3000 thickness = 5 mm, > 3000 thickness = 7 mm epoxide-powder coating. > 3000 thickness = 7 mm PVC, transparent, for very low - FLAP servoALASKA assistance electropneumatic ALASKA PVC, transparent, for very low temperatures, thickness = 5 mm and pneumatic devices, consisting of two temperatures, thickness = 5 mm and yellow PVC, flexible curtain, pneumaticGrey pistons with accessories are Grey and yellow PVC, flexible curtain, thickness = 5 mm, types: available in the available in the following thickness = 5 mm, available in the following versions: CONTACT CT. Push-button, two-directional, pneumatic following versions: - MIX, with lower skirting in painted PVC device (CT with guiding plates and galvanized steel casing, - MIX, with lower skirting in painted PVC and transparent upper part CT-Y with special guiding plates and stainless steel casing). and transparent upper part - TRIS (with three sections) with lower AUTOMATICskirting AM. Mono-directional device - TRIS (with three sections) with lower and head in painted pneumatic PVC, with pneumatic opening and transparent central partspring closing, including skirting and head in painted PVC, electropneumatic control panel withPVC guiding platestransparent central part - OBLO (with portholes) in(AM coloured and steel casing, AM-Y with special guiding plates and - OBLO (with portholes) in coloured PVC with portholes in yellow moplen with portholes in yellow moplen stainless steel casing). Anti-abrasion black rubber flexible Anti-abrasion black rubber flexible AUTOMATICcurtain, AMP. Mono-directional with 2 strengthening inserts in curtain, with 2 strengthening inserts in pneumatic device withversions. pneumatic MIX and TRIS MIX and TRIS versions. opening and spring closing, including pneumatic logic control panel. PVC / ALASKA

MIX

PVC / ALASKA

Curtain information

MIX

PVC curtain with strengthened borders, available in the following versions: - Transparent PVC < 3000 thickness = 5 mm, > 3000 thickness = 7 mm 1300

1300

-A  LASKA PVC, transparent, for very low temperatures, thickness = 5 mm -G  rey and yellow PVC, flexible curtain, thickness = 5 mm, available in the TRIS OBLO' following versions:

TRIS

OBLO'

- MIX, with lower skirting in painted PVC and transparent upper part

Anti-abrasion black rubber flexible curtain, with 2 strengthening inserts in MIX and TRIS versions.

1500

260

1300

1300

-O  BLO (with portholes) in coloured PVC with portholes in yellow moplen

82

260

1500

- TRIS (with three sections) with lower skirting and head in painted PVC, 260 transparent central part

260


operational flexibility Strip is the simple transparent PVC door, suitable to divide big and small spaces. Thanks to Strip, company departments can be functionally separated without loosing luminosity. Passing from one department to another is totally trouble-free and thanks to its high operational versatility Strip can satisfy any special Flexible Strip door requirement. You can have it fixed or and sliding onhigh a Quick fastening straight-line track. It is equipped with Rapid, the special quick fastening/unlocking system, which allows trouble-free installation, quick unlocking of the strips with the possibility of drawing them to the side and placing them one on top of the other Product code LDSTPVC when the door is not used for a period of time or is not needed.suitable Strip is the simple transparentclosing PVC door, It helps reduce loss of heat because it opens just to divide big and small spaces. enough to let vehicle/people, etc. through.

1300 780 450

Docks

Product Range > Doors

operational flexibility LEGEND Wall opening width Wall opening height Total width Total height Horizontal clear opening Vertical clear opening Overlap

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81

Passing from one department to another is totally trouble-free and thanks to its high operational versatility. It is equipped with Rapid, the special quick Main technical features fastening/unlocking system, which allows trouble-free Special RAPID system, with galvanized installation, quick unlocking of the strips steel or AISI 304 stainless steel modular with the possibility of drawing them to the side and placmetal structure, enabling trouble-free ing them one on top of the otherassembling/disassembling when the doorof the is not strips. used. This system allows to change strip It helps reduce loss of heat because it opens arrangement accordingjust to necessity and in idle through. periods, side tiding up is possible. enough to let vehicle/people, etc.

DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106

Flat fitting bearings for under crosspiece fastening or corner fitting bearings for front fastening when no other installation Main technical features and Strip features solution is possible.

Ramp 107

- S pecial RAPID system, with galvanized steel or AISI 304 Galvanized steel single or double tracks stainless steel modular metal structure, enabling with flat and corner fitting bearings. trouble-free assembling/disassembling of the strips. This system allows to change strip arrangement according to necessity and in idle periods, side tiding up is possible.

Structures 108

- F lat fitting bearings for under crosspiece fastening or corner fitting bearings for front fastening when no other installation solution is possible.

Code Index

Shelters 109 Scissor Lift 110 Freight Hoists 113

Strip

Strip flexible doors

-G  alvanized steel single or double tracks with flat and corner fitting bearings.

Dimensions

Quick fastening and high

- S elf-extinguishing PVC, cut-to-measure operational flexibility strips with rounded borders, fastened on special swinging jaws, which, Strip is the simple transparent PVC door, suitable allowing strips to swing, prevent to dividethem big and small spaces. from being damaged Thanks toduring Strip, passing company through. departments can be

functionally separated without loosing luminosity. -A  wide range of strip arrangement Passing from one department to another is totally solutions allow to satisfy any trouble-free and thanks to its high operational installation requirements. versatility Strip can satisfy any special requirement. You can have it fixed or sliding on a straight-line track. It is equipped with Rapid, the special quick fastening/unlocking system, which allows trouble-free installation, quick unlocking of the strips with the possibility of drawing them to the side and placing them one on top of the other when the door is not used for a period of time or closing is not needed. It helps reduce loss of heat because it opens just enough to let vehicle/people, etc. through.

Strip

Flexible wing doors and flexible strip doors

Dimensions Strip flexible doors

LEGEND Wall opening width Wall opening height Total width Total height Horizontal clear opening Vertical clear opening Overlap

83


Strip flexible doors Quick fasten ing and Product Range > Doors operational flexibilit high y Strip is th

e simple transp arent PVC door to divide big , suitable and small spac es. Thanks to Strip , company de partments can functionally se Flexible Strip door be parated witho ut loosing lum Passing from inosity. one departmen t to another is trouble-free an totally d thanks to it s high operat versatility Strip io na l can satisfy an y special requirement. You can have it fixed or slid straight-line tr ing on a ack. It is equipped with Rapid, th e special quic fastening/unlo k cking system, w hich allows trouble-free in stallation, qu ick unlocking strips with th of the e possibility of drof aw side and placin inginstallation Types of th Types installation em to the g them one on top of the othe when the door r is not used fo r aflat perio closing is noRapid system with fitting d ofbearings Within doorway installation ti m e t needed or . It helps reduce loss of heat be cause it open enough to let s just vehicle/people , etc. through.

Dimensions

Rapid system with flat bearing track

LEGEND Wall openin g width Wall openin g height Total width Total height Horizontal cle ar opening Ver tical clear opening Overlap

Main technic

al featuStripreheight s

Strip height Special RAPID system, with galvanized steel or AISI 304 stainless steel modular metal structur e, enabling tr ouble-free assembling/di sassembling of the strips. This system al lows to change Strip strip features ar ra ng em en Rapid system corner fitting bearings Rapid system with corner bearing track Outside doorway installation t accord ing to with ne ce ssity and in idle periods, si Self-extinguishing PVC, cut-to-measure de tiding up is possible. Flat fitting be arings for undestrips with rounded borders, fastened on r crossp ce fastening or co jaws, which, allowing rner fitting bespecialieswinging arings for front fastenin g when no ot strips to swing, prevent them from being her installation solution is po ssible. damaged during passing through. Galvanized stee Strip height l single or do ub Alewide Strip height with flat and tracksrange of strip arrangement corner fitting bear ings. solutions allow to satisfy any installation

requirements.

Strip

Strip

Flexible wing doors and flexible strip doors

Flexible wing doors

and flexible strip doors

84

Types of installation


1300 780 450

Docks

Product Range > Doors Safety and control systems

Strip and Flap doors Intro 4

control systems RMM -M  icrowave radar

Flexible wing doors and flexible strip doors

Large Doors 8

LAMP H - 2  4 V flashing beacon

with function discrimination: dar with function discriminavehicle â&#x20AC;&#x201C; strian crossing direction pedestrian crossing trol for RMM radar adjustment direction

ning, two-channel mini radio

TEL 2

BIX LP2 - Self-learning, BIX LP2 two-channel mini Safety and control systems ccessories and safety radio remote ation system installation. control

s

DockBrain 86 Dock Intro 92

Seals 103 Barriers 106 Ramp 107

APSBIX - ALP2P utomatic anti-panic system

Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index - 55865

Flap Strip

TEL 2

INVERTER LAMP H - E lectronic control panel with speed adjustment

BIX LP2P

XEL 2

- 55865

LAMP H

LAB 9CS

LAMP H

C S.p.A. ons. Banfi, 3 - 21042 Caronno Pertusella (VA) - ITALY 39 02 963911 - Fax +39 02 9650314 ditec.it - ditec@ditecva.com APS

XEL 2INVERTER

INVERTER

doors And flexible strip doors

APS

B - 02/05 - Flap Strip

A

BIX LP2P

- Flexible wing doors And flexible strip doors

A

push-button

Ditec products are constantly improved. As a consequence, technical data as listed in this leaflet are not to be considered binding. Further information can be found in our technical manuals, available on the website www.ditec.it

PVC 81

Structures 108

- 55865

RMM

APS - Automatic anti-panic system

BIXare LP2 DITEC actuators CE-marked. LAB 9CS They are designed and built in compliance with the safety requirements defined in the Machinery Directive (98/37/EC), Electromagnetic Compatibility Directive (89/336/EEC) and Low-Voltage Directive (73/23/EEC). DITEC S.p.A. reserves the right to make any changes whatsoever in order to upgrade its products.

62

TEL 2

eINVERTER constantly improved. - Electronic control panel with speed remote control ,adjustment technical data as listed in ot to be considered nformation can be found in nuals, available on the Regulations BIX LP2 ec.it LAB 9CS Use only DITEC accessories and safety devices for automation system installation.

High Speed

Drawbridge 99

Flap Strip

nic control panel with speed

Flexible wing doors and flexible strip doors

ti-panic system

Flexible wing doors and flexible strip doors

XEL 2 - Infra-red photocell for outdoor installation, general use

A

RMM

TEL 2 - R  emote control for RMM radar ing beacon hotocell for outdoor adjustment installation,

re CE-marked. RMM - Microwave radar with function discrimination: crossing direction andvehicle builtâ&#x20AC;&#x201C; pedestrian in compliance TEL 2 - Remote control for RMM radar adjustment quirements defined in BIX LP2 - Self-learning, two-channel mini radio RMM ective (98/37/EC), remote control ompatibility Directive BIX LP2P - 433 MHz, two-channel, push-button control d remote Low-Voltage Directive LAB 9CS EC S.p.A. reserves the- 4 33 MHz, LP2P LAMP H - 24 VBIX flashing beacon changes whatsoever in XEL 2 - Infra-red photocell for outdoor installation, two-channel, general use its products.

15

Leveller 95

Flap Strip

z, two-channel, push-button

Panel Lift

85


DockBrain

Complete Automated Dock Solution 100% Australian developed

Dockbrain for the first time links new and existing dock equipment with planning and control. This Australian innovation from Leda can change the way you look at and run your loading docks, leading to enhancements in: Safety Security Efficiency Environment Planning Minimise quing of trucks by allocating delivery slots Extract value from existing resources before catering for peak demand Preload freight to appropriate doors ready for loading

86

Control Secure your docks and doors Ensure docks are safely operated with touchscreen interface Log and report on movements at all your docks for both trucks and forks Navigate incoming trucks to designated doors.


1300 780 450

Docks

DockBrain Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

Dockbrain is installed to meet the operational control levels you need. Whether it is dock safety PVC 81 at tier 1 to integrated multi site control at tier 3, Dockbrain has you covered. It is important to note that each increasing tier level also incorporates those beneath it. DockBrain 86

Dock Intro 92

Tier 1

Leveller 95

Door Control

Drawbridge 99

At its basic level Dockbrain is a safer way to operate a dock with its touchscreen interface. It has never been faster to train staff on dock operations by incorporating a rigid safety checklist with easy to follow text and pictures. All commands are logged for audit and safety functions.

Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110

Tier 2

Freight Hoists 113

Site Control

Code Index

Tier 1 safety and touchscreen plus site control. Now you can control multiple doors on your warehouse from the one location. Ideal for truck to door allocation from your reception or receiving /despatch office. Superior computing power means comprehensive reports and auditing features such as comprehensive time stamping of all instructions and events. The system can receive service requests from individual doors and alert operators to all operational and safety concerns. Tier 3 Multi Site Control Add all the functions for Tier 1 and 2 plus the added functionality of managing your multiple locations via the web full time or after hours. Integrate CCTV and centrally manage your docks in the 21st century. The Dockbrain website allows you or the trucking company to pre-book truck times and drivers to specific docks to facilitate warehouse planning, Visually track and audit dock movements to integrate with your security system. 87


DockBrain

Dockbrain Equipment Control Dockbrain is equipment independent so will integrate with pre-existing loading docks or you can design a solution from scatch using this handook. Leda realise distribution is not one size fits all, so we will develop a dockbrain solution with you to meet individual company requirements from one to hundreds of doors and multiple facilities.

Dock Air Conditioning System

High Speed Door

Floodlight

Dock Door Dock Shelter

Traffic Lights Flashing Light

LDDL Dock Light DOCKBRAIN Leda's Dock Controller

Audible Alarm Intercom Keyswitch Prox Card Reader

Traffic Lights

LDSA3635 Inflatable Seal

TMH60 Boom Gate

Intercom Keyswitch Prox Card Reader

LDL20 r Dock Levelle Chocks Auto

LDRB Rubber Bumper Reversing Sensor Wheel Guides LOOPTRUCK Vehicle Loop

Equipment Leda is able to integrate existing dock equipment or can supply and install a range of dock and door equipment to meet your warehousing requirements. Further information is contained in this handbook but if you have any specific requirements or questions to consider then please contact our offices. Scoping Take advantage of Ledaâ&#x20AC;&#x2122;s experience if you would prefer Leda to scope & audit sites to see what equipment is in place for a Dockbrain solution. 88


1300 780 450

Docks

DockBrain Intro 4 Large Doors 8

Web Control (Tier 3) Imagine controlling your docks and doors from your office, reception, security or anywhere else at site. Now imagine this control from any web connected PC! You can centrally control 1 or hundreds of sites and docks with any web browser (even a web connected tablet PC such as iPad if you are on the move). Prebooking Booking a slot can be by your own staff where trucks can call in to request a slot or a third party restricted website login is available for freight companies to log in and manage their own fleet and drivers. You can even track site inductions. Security In its strictest security sense, you can provide vehicle and driver information to your security team to vet drivers prior to deliveries or at the front gate or lastly the actual dock. Ideal for sensitive government sites or where you want to block specific trucks or drivers from entry.

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

Communications Dockbrain can SMS or email confirm arrival times to trucks queued or on approach. This is ideal for sites with peak demand, limited parking or space (eg construction sites), secured locations or temperature controller. By calling trucks as required you can avoid queuing at the front gate and call trucks to your location as required. Right down to the very door they are to dock at, which is ideal for load preperation. OHS Dockbrain acts as a link between your equipment register for docks and the required training and maintenance for such equipment. Most notably your staff at the dock level can report service faults as they arise.

89


DockBrain Eyes

Increase dock leveller & scissor lift safety with intelligent sensors from DockBrainTM

Product Code : PEBEAMLZR Set exact detection zone parameters to the mm Discern people & vehicles Enter block out zones in your detection area Add “Virtual” open or close buttons Remote controller for settings Comes with 10 metres of cable Performance Maximal detection range: 9.9 m x 9.9 m Variable depth of plane (1 m max.) according to the installation height High level of safety with a complete three-dimensional detection in front of door Detection of small objects Replaces current solutions such as contact edges, light beams & grids Easy installation & retrofit Introduction Safety in any industrial setting is the priority for any organisation these days. In appraising the safety of our own technicians servicing hydraulic equipment, Leda has developed a system that can be adapted to enhance personnel safety around equipment such as Leda’s scissor lifts or dock levellers. Dockbrain eye’s can be adapted to be used for doors, shared vehicle & pedestrian areas, an alternative to light grids or PE beams where appropriate. So talk to Leda today to discuss adapting this product to meet your safety objectives.

Scenario 1 Protect service technicians or anyone entering dock leveller cavity.

90

Scenario 2 People on or near the dock leveller or scissor lift.


1300 780 450

Docks

DockBrain Eyes Intro 4 Large Doors 8

Technical Specifications Technology LASER scanner, time-of-flight measurement Detection mode Presence ( EN 12453 Type E ) Max. detection range 9.9 m × 9.9 m Remission factor > 2 % Angular resolution 0,3516° Typ. min. object size 2,1 cm @ 3 m / 3,5 cm @ 5 m / 7 cm @ 10 m (in proportion to object distance) Testbody 700 mm × 300 mm × 200 mm (testbody A according to EN 12445) Emission characteristics IR LASER Wavelength 905 nm; max. output pulse power 75 W; Class 1 Red visible LASER Wavelength 650 nm; max. output CW power 3 mW; Class 3R Supply voltage 10-35V DC @ sensor terminal Power consumption < 5 W Response time Typ. 20 ms; max. 80 ms Output 2 electronic relays ( galvanic isolation - polarity free ) Max. switching voltage 35V DC / 24V AC Max. switching current 80 mA (resistive) LED-signals

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

1 blue LED: power-on status 1 orange LED: error status 2 bi-coloured LED: detection/output status Dimensions 125 mm (L) × 93 mm (D) × 70 mm (H) ( mounting bracket + 14 mm ) Material PC/ASA Colour Black Rotation angles on bracket -5° to +5° ( lockable ) Tilt angles on bracket -3° to +3° Protection degree IP65 Temperature range -30 °C to +60 °C if powered Humidity 0-95 % non-condensing Vibrations < 2 G

91


Product Range > Docks Docks Introduction

Safety of one or two hydraulic cylinders High duty cycle Proven design

Introduction Loading docks are a critical piece of the supply chain by linking your warehouse to trucking fleet. At Leda we understand the requirement for tested, heavy duty, reliable & safe to operate equipment is paramount to a successful loading dock One or two rams With two rams you can point load more which you cannot do with some central mounted single hydraulic ram docks. Ledaâ&#x20AC;&#x2122;s docks are also rated to carry the load whether a truck is in position or not. This is critical should the truck accidentally ever drive off. Safety Mechanical lockout for servicing Drive-away rated to hold fork should truck drive off Lowers or raises with truck automatically during loading or unloading Toe guard side protection Potential for DockBrain safety enhancement i.e. can be interlocked with truck restraint Operation While the Leda dock console is easy to operate, proper training is required to operate a dock leveller. Safety can be further enhanced with the DockBrain touchscreen as further checks & controls can be introduced.

92


1300 780 450

Docks

Product Range > Docks Docks Introduction

Safety of two hydraulic cylinders High duty cycle Proven design

Intro 4 Large Doors 8

Standard Specifications

Panel Lift

15

High Speed

62

PVC 81

Generally at least double the length of the vehicle but dependant on type.

DockBrain 86 Dock Intro 92

Height Dock height should equal your average load height (not truck height)

Leveller 95 Drawbridge 99 Seals 103

Alert

Barriers 106

Ramp 107 Dock Heights? The height of your dock should be at Structures 108 the average height of your loads. Remember that containers can add Shelters 109 200mm to your truck bed loads.

Scissor Lift 110 Freight Hoists 113 Code Index

Note: Rear 2 pallets from container may dictate that these are unloaded prior to the operation of ramp by a trained & experienced operator.

93


Product Range > Docks Docks Introduction

Safety of two hydraulic cylinders High duty cycle Proven design

Product Code

LDL20

LDL25

LDL30

Length (mm)

2000

2500

3000

Width (mm)

2000

Up Length (mm)

400

Load Capacity

6 tonnes (60kN)

Max. Point Load (6mm tear plate)

1.3N / mm2

Max. Point Load (8mm tear plate)

6.5N / mm2

Finish

80 um Wet Spray RAL 7016

Power

400V 3 - phase

Motor

0.75kW Hydraulic unit

Cast in Frame

LDL20CF

LDL25CF

LDL30CF

Recommended Maximum Gradients Note: Check vehicle manuals & AS2359.6 Powered industrial trucks - Safety code

Component overview

1

Leveller platform

2

Swing lip

3

Leveller frame

4

Toe guards

5

Warning stripes

6

Hydraulic unit

7

Lift cylinders

8

Swing lip cylinder

9

Buffers (option)

10

Tail lift recess

11

Control unit

Suggested positioning for control unit is drivers side of dock so operator & truck driver can see each other.

Finish

Conduits

Paint RAL 7016

Hydraulics - 50mm minimum - Grey Power - 32mm minimum - Orange

94


1300 780 450

Docks

Product Range > Docks Automatic Dock Leveller

Product Code : LDL20

One or two hydraulic cylinders High duty cycle Proven design

Intro 2 Doors 14

THOUSANDS INSTALLED

Panel Lift

20

High Speed

30

PVC 40

Durable and extremely safe Quick operation Easy to install

Docks 46 DockBrain 52 Leveller 76 Drawbridge

82

Seals 94 Barriers 100 Ramp 102 Structures 106 Shelters 111 Pedestrian 114 Mat Handling 114 Scissor Lift 136 Freight Hoists 142 Code Index 153

Cast In Frame

Product Code: LDL20CF

Order your cast in metal work to suit your project timeline

95


Product Range > Docks Automatic Dock Leveller

Product Code : LDL25 Durable and extremely safe Quick operation Easy to install

Cast In Frame

Product Code: LDL25CF

96

One or two hydraulic cylinders High duty cycle Proven design


1300 780 450

Product Range > Docks Automatic Dock Leveller

One or two hydraulic cylinders High duty cycle Proven design

Product Code : LDL30 Durable and extremely safe Quick operation Easy to install Longer length makes for shallower gradients for more load heights

Docks

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

Cast In Frame

Product Code: LDL30CF

97


Product Range > Docks Manual Dock Leveller

Manual dock levelling solution Cost effective & Easy to use

Manual dock leveller Quick and easy to use Thousands installed worldwide Ideal for standard load heights

Protruding LDL1703WP LDL2003WP

Recessed LDL2003WR Cast In Frame

Product Code: LDLRF Additional options LDL30F - see page 17 LDDBF - see page 17

98


1300 780 450

Docks

Product Range > Docks Dock Drawbridge

Manual dock to truck connection Cost effective & Easy to use Great for variable truck heights

Intro 4 Large Doors 8

A

Product Code : LDDB

Panel Lift

15

High Speed

62

PVC 81

Spring loaded assisted lift, easy to use Great reach up to 2000mm Mounted on rail so can move horizontally. Rail mounted - 4.0T capacity, Fixed - 6.0T capacity Rail length - 3.0M standard

DockBrain 86 Dock Intro 92 Leveller 95

B

Fit to existing docks

Drawbridge 99 Seals 103

Automatic option available

Barriers 106 Ramp 107 Structures 108

Adjustable slide rail

Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

C

A

B

C

Capacity/Kg

Unit weight/Kg

LDDB1515

1500

1500

195

4000

275

LDDB1815

1800

1500

195

4000

290

LDDB1820

1800

2000

260

4000

385

LDDB2020

2000

2000

260

4000

430

99


Product Range > Docks Drawbridge Frame

Add dock hardware to existing concrete docks Designed to withstand hardware load ratings

Product Code : LDDBF Compatible with: Dock Drawbridge & Protruding Manual Dock Leveller Strong construction 200 x 100 RHS Hot dip galvanised for long life Load rated to dock hardware Retrofit to existing concrete docks

Cast In Angle

Product Code: LDL30F Compatible with: Dock Drawbridge & Protruding Manual Dock Leveller Cast into new concrete docks

100


1300 780 450

Docks

Product Range > Docks Options & Accessories

For Docks Intro 4 Large Doors 8

Buffers LDRB Prevent damage to buildings from reversing trucks.

Reverse Sensor Detects truck backing up to dock & provides visual feedback through flashing of traffic light signal.

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99

Chocks - Manual Simple check, site staff can implement to prevent truck movement.

Chocks - Auto Prevents trucks driving off until safety assured. Can be interlocked to dock leveller through Dockbrain.

Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109

Boom Gates TMH60 Refer to Industrial Gates & Perimeter Security Handbook.

Wheel Guides LDWG Assists reversing trucks by guiding them to a fixed position. Ideal for Automatic dock leveller.

Fencing / Gates Physical barriers to stop pedestrians entering dangerous areas.

RFID Detect specific trucks at individual doors or forks loading trucks. All can be recorded through Dockbrain.

Barriers Can prevent damage to stock or buildings. Ideal for segregated pedestrian aisles & areas.

Traffic Lights Direct trucks externally or forks internally.

Scissor Lift 110 Freight Hoists 113 Code Index

101


Product Range > Docks Options & Accessories

For Docks

Dock Lights LDDL Designed for maximum illumination of truck interior.

Road Loops LOOPTRUCK For detection of vehicles either side of door.

PE Beams Can prevent movement of dock equipment.

Convex Mirror LDCM For drivers of forks to utilise when maneuvering in & out of trucks.

Insulated dock Insulate your Auto dock levellers for thermal protection.

Vertical Rubber Bumper Prevent damage to buildings from reversing trucks.

Dock Steps Quick pedestrian access from ground level into dock.

102


1300 780 450

Product Range > Docks

Docks

Dock Seals Intro 4 Large Doors 8 Panel Lift

15

Foam Seal

High Speed

62

For fixed vehicle size fleets.

PVC 81

Creates a firm & positive seal for a known vehicle size. It is important to note vehicle force on seal & wall or structure seal in mounted to. Ask about our range of colours or having your own logo printed on the seals.

DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103

Pad Thickness: 180mm Top Pad Height: 450mm Side Pad Width: 300mm

Barriers 106

Foam Seals have high visibility side pleating

Structures 108

Ramp 107

Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

103


Product Range > Docks Dock Seals

Mechanical Seal

LDSM3232 - height 3200mm LDSM3234 - height 3400mm LDSM3236 - height 3600mm Range of sizes Rain & weather protection Fits various truck sizes

Optional yellow strip shown Contrast assists reversing drivers

Before

After Truck

Building

Truck

Seal compresses as truck reverses into position for tight fit 104

Building


1300 780 450

Product Range > Docks Dock Seals

Refrigerated warehousing Power saving

Docks

Intro 4 Large Doors 8

Inflatable Seal LDSA3635 - height 3500mm LDSA3637 - height 3700mm LDSA3639 - height 3900mm Shelter inflates around rear of truck For refrigeration or temperature sensitive sites Built 40mm panel structure 3mm PVC

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

Note: Ask about our levellers insulated docks. Save energy for refrigerated warehousing.

105


Product Range > Docks Dock Barriers

Protect dock openings from damage Heavy duty construction

Product Code : LDDP Typically constructed from 80NB pipe Customisable to your dock opening Cast in or base plate installation

Product Code : LDFG Constructed from 32 to 40NB pipe Gates can be locked closed & at 90deg open to provide a safe barrier either side of the loading area. Easily upgrade existing loading bays - simple installation via masonry anchors. Custom opening dimensions & matching fencing available.

106


1300 780 450

Product Range > Docks

Docks

Dock Ramp For integrating floor to dock leveller heights Heavy duty design

Minor Ramp Small deviations in dock leveller height Up to approx 200mm

Intro 4 Large Doors 8 Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

Major Ramp Large forklift ramp for complete dock leveller solution on slab

Leda will match a ramp to your requirements to consider truck height, fork gradient, fixed or maneuverable, additional dock leveller. Note: A scissor lift may also be able to assist in ramp applications if space is short or flexibility is required. 107


Product Range > Docks Dock Structures

Allows leveller installation on pre-existing sites Structurally certified

Product Code : LDDS Stand-alone solution for housing an LDL20 Automatic Hydraulic Loading Dock Leveller Can be fitted with Dock Shelters & Sectional Doors No major modifications to existing structures Customisable to suit new & existing buildings Can make more space in the building

Hydraulic tail lift cavity Note: This requirement can increase truck maneuvering room in area

108


1300 780 450

Docks

Product Range > Docks Dock Shelters

Extends weather protection over external leveller Custom cladding / insulation options available

Intro 4 Large Doors 8

Product Code : LDDSWR

Panel Lift

15

High Speed

62

PVC 81

Standard Loading dock shelter Multiple cladding options available Insulated igloaâ&#x20AC;&#x2122;s also available

DockBrain 86 Dock Intro 92 Leveller 95

Colorbond cladding

Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108

LDDS

Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

Product Code : Loading dock shelter with inflatable seal, separating the loading area from the external environment.

109


Product Range > Materials Handling Scissor Lift - Standard

Multiple pallet lifting solution Heavy duty cycles

Multiple configurations available Required Parameters Load / Capacity Pallet quantity Platform size Vertical travel Pit / No pit Overall heights Single Phase (smaller tables) or 3 Phase (10-12 cycles/hour) Design Scissor mechanism with on-board or remote power pack and platform that can be used to elevate multiple pallet loads of goods between a dock and a vehicle. Scissor Lift tables are also specified in floor to floor applications where single or multiple pallet loads or equipment are being transferred. Safety bar is included in all tables as a no cost extra. Options Variable platform sizes. External and remote power packs. IP 56 electrical fittings. Hinged flaps. (manual & powered - interlock option) Boom gates. (1.8M max - interlocked) Fork sockets. Different platforms including chequerplate, special paints and stainless steel skins. Galvanised finish available. (small platforms only) Safety skirts. Air motors. Tandem tables. Lifting lugs. All Leda lift tables are manufactured to AS1418.8 & AS1418.1.

110


1300 780 450

Product Range > Materials Handling Scissor Lift - Shallow

Shallow profile elmiinates the need for pit Simple existing slab installation

Docks

Intro 4 Large Doors 8

Single pallet, 1 tonne capacity (standard) Low height 40mm profile Push button or remote operation Hydraulic actuation High duty cycle applications Integrated safety bar Options External and remote power packs. IP56 electrical fittings. Different platforms including chequerplate, special paints and stainless steel skins. All Leda lift tables are manufactured to AS1418.8 & AS1418.1

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109 Scissor Lift 110 Freight Hoists 113 Code Index

111


Product Range > Materials Handling Scissor Lift - Accessories

IP56 ELECTRICAL INSTALLATION

SPECIAL PAINT

Electrics to IP56 degree of protection

Standard enamel finish is red with

(to AS1939) for outdoor or

yellow safety bar. Special colours or

washdown applications

paint formulations can be provided.

SKIRT

EXTERNAL POWER UNITS

Concertina skirt made from

Hydraulic power unit can be external

reinforced vinyl with stiffening rods

to the lift table, connected via a

to prevent ingress into mechanism.

hydraulic hose.

SINGLE PHASE / THREE PHASE

CHEQUERPLATE PLATFORM

Lift tables may be supplied in either

Chequerplate platform for

single or three phase.

pedestrian non-skid surface.

PLATFORM SIZE

HINGED FLAPS

Standard platform available ex

Hinged flaps can be fixed to the

stock. Non-standard platforms can

platform to span the gap between

be built to clientâ&#x20AC;&#x2122;s spec.

the platform & the pit edge.

FORKLIFT SOCKETS AT THE SIDES

ACCESS HATCH

Forklift sockets can be welded to the

Access hatch in the platform allows

sides of the base frame of the lift

for maintenance access to power

table for easier relocation.

unit when the lift table is fully lowered.

GALVANISED PLATFORM

LIFTING LUGS

Entire platform can be hot dipped

Screw in lifting lugs for easier

galvanised for enhanced durability

installation, especially for installing

& corrosion resistance.

into a pit. (removable)

FORKLIFT SOCKETS UNDERNEATH Forklift sockets can be incorporated into the base frame for easy relocation of the lift table.

TANDEM TABLES Most models available in tandem configuration. Ideal for handling longer loads & higher capacity.

112

PERSONNEL LIFTING Includes handrails, gates, safety interlocking & on-board controls.


1300 780 450

Product Range > Materials Handling Freight Hoists

No pit required, custom sizes available Easy to use, install & maintain

Docks

Intro 4 Large Doors 8

Suitable for Factories Warehouses Mezzanine floor access Self storage Retail centres Commercial buildings Specifications 2 position No pit required Push button operation Safe & simple Low 45mm profile Hydraulic flow control safety (standard)

Panel Lift

15

High Speed

62

PVC 81 DockBrain 86 Dock Intro 92 Leveller 95 Drawbridge 99 Seals 103 Barriers 106 Ramp 107 Structures 108 Shelters 109

Features

Scissor Lift 110

Freight only or Freight + Personnel (with comms) Capacities 500 to 4,000 kg Travel up to 7,000 mm Variable platform size Freestanding (clad) or In existing Shaft No pit required Clad/unclad

Freight Hoists 113 Code Index

Designed & manufactured in Australia in accordance with OH&S & Australia Standards

113


The Leda Advantage Contact Us Email : sales@ledasecurity.com.au Web : www.ledasecurity.com.au NSW Sales 8/185 Briens Rd Northmead NSW 2152 PO BOX 128 Wentworthville NSW 2145 Australia Phone : (02) 8413 3410 Fax : (02) 8677 7119 VIC Sales 2/89 Enterprise Way, Sunshine West VIC, 3020 PO Box 1091, Sunshine West, VIC, 3020 Australia Phone : (03) 8399 8150 Fax : (03) 9315 1085 QLD Sales Unit 2/ 387 Lytton Road Morningside QLD 4170 PO Box 186 Morningside QLD 4170 Australia Phone : (07) 3613 8270 Fax : (07) 3399 5688 SA Sales 1/5 Tooronga Ave Edwardstown SA 5039 Australia Phone : (08) 8374 3266 Fax : (08) 8374 3299 Perth Sales 1/3 Finance Place Malaga WA 6090 Australia Phone : (08) 6430 1670 Fax : (08 ) 9209 2860 Head Office & Manufacturing Address: 18 Reliance drive Tuggerah NSW 2259 PO Box 5196 Chittaway Bay NSW 2261 Australia Phone : (02) 8413 3430 Fax : (02) 4353 2255

114


w w w. l e d a s e c u r i t y. co m . a u Leda Security Products Pty Ltd ABN 23 067 258 235

Te l e p h o n e 1 3 0 0 7 8 0 4 5 0 E m a i l s a l e s @ l e d a s e c u r i t y. co m . a u NSW Sales

VIC Sales

QLD Sales

SA Sales

WA Sales

Head Office

Unit 8 / 185 Briens Rd

Unit 2 / 89 Enterprise Way

Unit 2 / 387 Lytton Rd

Unit 1 / 5 Tooronga Ave

Unit 1 / 3 Finance Place

& Manufacturing

Northmead NSW 2152

Sunshine West VIC 3020

Morningside QLD 4170

Edwardstown SA 5039

Malaga WA 6090

18 Reliance Drive

PO Box 128

PO Box 1091

PO Box 186

Phone: 08 8374 3266

Phone: 08 6430 1670

Tuggerah NSW 2259

Wentworthville NSW 2145

Sunshine West VIC 3020

Morningside QLD 4170

Fax: 08 8374 3299

Fax: 08 9209 2860

PO Box 5196

Phone: 02 8413 3410

Phone: 03 8399 8150

Phone: 07 3613 8270

Chittaway Bay NSW 2261

Fax: 02 8677 7119

Fax: 03 9315 1085

Fax: 07 3399 5688

Australia Phone: +61 2 8413 3430

Australasian distributors and resellers in Northern Territory, north Queensland, Tasmania and New Zealand.

Distributed by

Fax: +61 2 4353 2255


Doors and docks handbook oct 2013 small size  

http://www.ledasecurity.com.au/media/pdfs/page%20management/Doors_and_Docks_Handbook_Oct_2013_Small_Size.pdf

Read more
Read more
Similar to
Popular now
Just for you